OSDN Git Service
Steven Moreland [Fri, 14 Apr 2017 04:19:48 +0000 (21:19 -0700)]
libbinder: vendor_available
By setting vendor_available, the following may become true:
* a prebuilt library from this release may be used at runtime by
in a later releasse (by vendor code compiled against this release).
so this library shouldn't depend on runtime state that may change
in the future.
* this library may be loaded twice into a single process (potentially
an old version and a newer version). The symbols will be isolated
using linker namespaces, but this may break assumptions about 1
library in 1 process (your singletons will run twice).
Background:
This means that these modules may be built and installed twice --
once for the system partition and once for the vendor partition. The
system version will build just like today, and will be used by the
framework components on /system. The vendor version will build
against a reduced set of exports and libraries -- similar to, but
separate from, the NDK. This means that all your dependencies must
also mark vendor_available.
At runtime, /system binaries will load libraries from /system/lib*,
while /vendor binaries will load libraries from /vendor/lib*. There
are some exceptions in both directions -- bionic(libc,etc) and liblog
are always loaded from /system. And SP-HALs (OpenGL, etc) may load
/vendor code into /system processes, but the dependencies of those
libraries will load from /vendor until it reaches a library that's
always on /system. In the SP-HAL case, if both framework and vendor
libraries depend on a library of the same name, both versions will be
loaded, but they will be isolated from each other.
It's possible to compile differently -- reducing your source files,
exporting different include directories, etc. For details see:
https://android-review.googlesource.com/368372
None of this is enabled unless the device opts into the system/vendor
split with BOARD_VNDK_VERSION := current.
Bug:
36426473
Bug:
36079834
Test: m -j libbinder
Test: attempt to compile with BOARD_VNDK_VERSION := current
(cherry picked from commit
3aa761697b93dab3e4b1acf90d14502a79a49219)
Merged-In: Iec94a66adbc852f7f23352307cf36f49a79ee3a6
Change-Id: Iec94a66adbc852f7f23352307cf36f49a79ee3a6
Treehugger Robot [Mon, 17 Apr 2017 20:26:40 +0000 (20:26 +0000)]
Merge "Fix error BufferQueue attaching flow."
Yifan Hong [Mon, 17 Apr 2017 18:12:27 +0000 (18:12 +0000)]
Merge "Update to allow multiple HALs in a manifest."
Yifan Hong [Thu, 13 Apr 2017 08:00:12 +0000 (01:00 -0700)]
Update to allow multiple HALs in a manifest.
Test: libvintf_test
Test: lshal --init_vintf
Bug:
37294247
Change-Id: I202787d7856db6e06e595bd52c644f6a0eefcb66
Josh Gao [Wed, 12 Apr 2017 19:43:13 +0000 (19:43 +0000)]
Merge "atrace: don't use sendfile."
Treehugger Robot [Wed, 12 Apr 2017 19:21:34 +0000 (19:21 +0000)]
Merge "Mark as vendor_available"
Josh Gao [Tue, 11 Apr 2017 22:21:13 +0000 (15:21 -0700)]
atrace: don't use sendfile.
sendfile appears to have horrendous performance when used with the
ftrace output file, being up to 100x slower than the naive read/write
loop.
Switch to doing that instead, speeding up atrace from:
$ atrace --async_start sched freq; sleep 1; time atrace --async_stop > dummy
c apturing trace... 0m08.93s real 0m00.08s user 0m07.98s system
to:
$ atrace --async_start sched freq; sleep 1; time atrace --async_stop > dummy
capturing trace... 0m00.78s real 0m00.07s user 0m00.21s system
Bug: http://b/
37164190
Test: atrace --async_start sched freq; sleep 1; time atrace --async_stop > dummy
Change-Id: I22fe1871e263867f9ac54c8f5b474df824b4bc69
Treehugger Robot [Tue, 11 Apr 2017 16:19:14 +0000 (16:19 +0000)]
Merge "Remove .(ll)ndk suffix from (ll)ndk_library"
Dan Willemsen [Fri, 7 Apr 2017 22:48:39 +0000 (15:48 -0700)]
Remove .(ll)ndk suffix from (ll)ndk_library
Soong handles these automatically now.
Bug:
33241851
Test: Android-aosp_arm.mk is the same before/after
Test: build.ninja is the same before/after
Test: build-aosp_arm.ninja is the same before/after
Merged-In: Ie1cd267564095c51e536b7a84d53e7aed9dca288
Change-Id: Ie1cd267564095c51e536b7a84d53e7aed9dca288
Dan Willemsen [Fri, 7 Apr 2017 21:14:08 +0000 (14:14 -0700)]
Mark as vendor_available
By setting vendor_available, the following may become true:
* a prebuilt library from this release may be used at runtime by
in a later releasse (by vendor code compiled against this release).
so this library shouldn't depend on runtime state that may change
in the future.
* this library may be loaded twice into a single process (potentially
an old version and a newer version). The symbols will be isolated
using linker namespaces, but this may break assumptions about 1
library in 1 process (your singletons will run twice).
Background:
This means that these modules may be built and installed twice --
once for the system partition and once for the vendor partition. The
system version will build just like today, and will be used by the
framework components on /system. The vendor version will build
against a reduced set of exports and libraries -- similar to, but
separate from, the NDK. This means that all your dependencies must
also mark vendor_available.
At runtime, /system binaries will load libraries from /system/lib*,
while /vendor binaries will load libraries from /vendor/lib*. There
are some exceptions in both directions -- bionic(libc,etc) and liblog
are always loaded from /system. And SP-HALs (OpenGL, etc) may load
/vendor code into /system processes, but the dependencies of those
libraries will load from /vendor until it reaches a library that's
always on /system. In the SP-HAL case, if both framework and vendor
libraries depend on a library of the same name, both versions will be
loaded, but they will be isolated from each other.
It's possible to compile differently -- reducing your source files,
exporting different include directories, etc. For details see:
https://android-review.googlesource.com/368372
None of this is enabled unless the device opts into the system/vendor
split with BOARD_VNDK_VERSION := current.
Bug:
36426473
Bug:
36079834
Test: Android-aosp_arm.mk is the same before/after
Test: build.ninja is the same before/after
Test: build-aosp_arm.ninja is the same before/after
Test: attempt to compile with BOARD_VNDK_VERSION := current
Change-Id: I875a75d785aa13b97751e1c145183d87add01845
Treehugger Robot [Thu, 6 Apr 2017 06:34:45 +0000 (06:34 +0000)]
Merge "lshal --init-vintf stripped <impl> tag."
Treehugger Robot [Thu, 6 Apr 2017 01:39:35 +0000 (01:39 +0000)]
Merge "This test is used to check if the kernel scheduler"
Yifan Hong [Tue, 4 Apr 2017 22:33:59 +0000 (15:33 -0700)]
lshal --init-vintf stripped <impl> tag.
<impl> tag is deprecated from the manifest.
Test: lshal --init-vintf
Change-Id: Ifa9336e3dfe7f1091ee61aa6a10df9629ad98b49
Howard Chen [Sat, 25 Mar 2017 09:12:59 +0000 (17:12 +0800)]
This test is used to check if the kernel scheduler
1. supports priority inheritance.
2. utilize the sync flag.
It also make statistic on average, best and worst latency
as well as number of deadline miss with a configurable
deadline specified in us.
The output is in json format hopefully to make it easy
to integrated with present test framework.
usage:
./schd-dbg # test and output json
./schd-dbg -i 1 # number of iterations
./schd-dbg -pair 4 # number of process pairs
./schd-dbg -deadline_us 2500 # deadline in us
./schd-dbg -v # debug
Test: pixel
Change-Id: Idccf0d402dcd7b81c639020364b5ee32075e18cb
Treehugger Robot [Tue, 4 Apr 2017 23:08:13 +0000 (23:08 +0000)]
Merge "vulkan: update Vulkan headers to 1.0.46"
Jesse Hall [Mon, 20 Mar 2017 20:09:19 +0000 (13:09 -0700)]
vulkan: update Vulkan headers to 1.0.46
- Add VK_EXT_swapchain_colorspace
- Add VK_KHR_incremental_present
Test: build aosp_arm64-eng
Change-Id: I6cd81baa2870bf436abab6191a05ebfd60ccbc46
Merged-In: I70ffd56a63da39301cd9706b1b91cf3643aab916
Dan Shi [Fri, 31 Mar 2017 17:13:30 +0000 (17:13 +0000)]
Merge "Add test config to dumpsys_test"
am:
cf617abcb2
Change-Id: I6257e48eeaf89e26ff4c46e69dd20941dae58392
Dan Shi [Fri, 31 Mar 2017 17:13:17 +0000 (17:13 +0000)]
Merge "Add test config to libgui_test"
am:
7f1e92dc64
Change-Id: Iaf39fdc5a6a9fb45cd0fb44504144d6eee66b909
Treehugger Robot [Fri, 31 Mar 2017 17:07:15 +0000 (17:07 +0000)]
Merge "Add test config to dumpsys_test"
Treehugger Robot [Fri, 31 Mar 2017 17:06:53 +0000 (17:06 +0000)]
Merge "Add test config to libgui_test"
Richard Uhler [Fri, 31 Mar 2017 07:50:15 +0000 (07:50 +0000)]
Merge "Remove obsolete and unused PATCHOAT_FOR_RELOCATION."
am:
804b145356
Change-Id: I0c9a38e9be249bcb81f7b04b436a00d60b779fc5
Richard Uhler [Fri, 31 Mar 2017 07:46:45 +0000 (07:46 +0000)]
Merge "Remove obsolete and unused PATCHOAT_FOR_RELOCATION."
Richard Uhler [Thu, 30 Mar 2017 14:44:12 +0000 (15:44 +0100)]
Remove obsolete and unused PATCHOAT_FOR_RELOCATION.
Bug:
33192586
Test: m
Change-Id: I7868402804935c27e896229371480c7a120e2477
Dan Shi [Thu, 30 Mar 2017 06:09:37 +0000 (23:09 -0700)]
Add test config to libgui_test
Design doc:
Generalized Suites & the Unification of APCT & CTS Workflows Design/Roadmap
https://docs.google.com/document/d/1eabK3srlBLouMiBMrNP3xJPiRRdcoCquNxC8gBWPvx8/edit#heading=h.78vup5eivwzo
Details about test configs changes are tracked in doc
https://docs.google.com/document/d/1EWUjJ7fjy8ge_Nk0YQbFdRp8DSHo3z6GU0R8jLgrAcw/edit#
Bug:
35882476
Test: local test
Change-Id: Iff1d3b7166dfc217a4d57eb211467f87c5bf4c34
Dan Shi [Thu, 30 Mar 2017 06:06:00 +0000 (23:06 -0700)]
Add test config to dumpsys_test
Design doc:
Generalized Suites & the Unification of APCT & CTS Workflows Design/Roadmap
https://docs.google.com/document/d/1eabK3srlBLouMiBMrNP3xJPiRRdcoCquNxC8gBWPvx8/edit#heading=h.78vup5eivwzo
Details about test configs changes are tracked in doc
https://docs.google.com/document/d/1EWUjJ7fjy8ge_Nk0YQbFdRp8DSHo3z6GU0R8jLgrAcw/edit#
Bug:
35882476
Test: local test
Change-Id: Icfbf76319b42959a0a65c5f8666744420fd5266c
Elliott Hughes [Tue, 28 Mar 2017 23:55:17 +0000 (23:55 +0000)]
Merge "Remove references to property size limits."
am:
8f8daca7ab
Change-Id: I146d719f51f6337abe13fc96b7e99fd7c4aebdcf
Treehugger Robot [Tue, 28 Mar 2017 23:49:51 +0000 (23:49 +0000)]
Merge "Remove references to property size limits."
Elliott Hughes [Tue, 28 Mar 2017 21:55:31 +0000 (14:55 -0700)]
Remove references to property size limits.
Bug: http://b/
33926793
Test: "python systrace.py"
Change-Id: Ia11c160935b8601bc9c4d867abc57ccf37f84082
neo.he [Tue, 28 Mar 2017 18:34:28 +0000 (18:34 +0000)]
Merge changes If756ad2a,I19aeb7ac
am:
15feba03ae
Change-Id: Ib1842ab89d245fb5bde291a26c4952e0fc262aba
Treehugger Robot [Tue, 28 Mar 2017 18:25:37 +0000 (18:25 +0000)]
Merge changes If756ad2a,I19aeb7ac
* changes:
Add alpha channel for the EGLConfig
Change the conditions of layer as translucent
Andreas Huber [Mon, 27 Mar 2017 21:07:40 +0000 (21:07 +0000)]
Merge "Enable --debug option for "lshal" command."
am:
16175ca725
Change-Id: Ifa29afcb7677a3ec76a03d5f0365ba4de7ee4c9b
Andreas Huber [Mon, 27 Mar 2017 21:02:30 +0000 (21:02 +0000)]
Merge "Enable --debug option for "lshal" command."
Andreas Huber [Fri, 24 Mar 2017 20:14:11 +0000 (13:14 -0700)]
Enable --debug option for "lshal" command.
This calls into live binderized services and logs their "IBase::debug(...)"
output.
Bug:
36520620
Test: make, adb shell lshal, adb shell bugreport
Change-Id: Ida3b0c61eafd9f3de562a5df3af24bbaf383de22
Fabien Sanglard [Thu, 23 Mar 2017 22:38:03 +0000 (22:38 +0000)]
Merge "Fix typo in Region to avoid unexpected values"
am:
2cbfb0cda6
Change-Id: I92a204fa492374c4c69a5d794d974b3cb8f454b3
Treehugger Robot [Thu, 23 Mar 2017 22:26:44 +0000 (22:26 +0000)]
Merge "Fix typo in Region to avoid unexpected values"
Steven Moreland [Thu, 23 Mar 2017 03:55:27 +0000 (03:55 +0000)]
Merge "lshal: --init-vintf exclude system hals"
am:
8db626d2f3
Change-Id: Ibe4636eb13c9439d09f51948ca49921a1e209747
Treehugger Robot [Thu, 23 Mar 2017 03:47:57 +0000 (03:47 +0000)]
Merge "lshal: --init-vintf exclude system hals"
Steven Moreland [Wed, 22 Mar 2017 21:22:55 +0000 (14:22 -0700)]
lshal: --init-vintf exclude system hals
--init-vintf is provided for convenience so that vendors can initialize
their vendor interface. Excluding system hals so that they aren't
included in the default vintf file that is generated. They are
maintained manually.
Test: Verified frameworks hals are no longer visible in init-vintf.
Bug:
34772739
Change-Id: Ie40c384334affcb3abee063d58000b808f04e234
Dmitry Shmidt [Thu, 23 Mar 2017 00:52:59 +0000 (00:52 +0000)]
Merge "dumpstate: Remove FWDUMP_bcmdhd support"
am:
86388dbc9a
Change-Id: Iadf37acb012f762919567354a7aede95f81b9eff
Adam Lesinski [Thu, 23 Mar 2017 00:48:42 +0000 (00:48 +0000)]
Merge "batteryservice: add scheduleUpdate binder method"
am:
e007716bc4
Change-Id: I8565c0502c3838d74fcd09ec75677e65cf85a0a9
Dmitry Shmidt [Thu, 23 Mar 2017 00:47:47 +0000 (00:47 +0000)]
Merge "dumpstate: Remove FWDUMP_bcmdhd support"
Treehugger Robot [Wed, 22 Mar 2017 23:53:59 +0000 (23:53 +0000)]
Merge "batteryservice: add scheduleUpdate binder method"
Adam Lesinski [Thu, 16 Feb 2017 02:45:23 +0000 (18:45 -0800)]
batteryservice: add scheduleUpdate binder method
Allows a caller to force an update to occur, instead of waiting
for an event or timer timeout.
Test: None (interface change)
Bug:
32645990
Change-Id: I1c94f1bed34d5f4cfe8e7d50cca4e5391dac2d62
Dmitry Shmidt [Wed, 22 Mar 2017 18:40:01 +0000 (11:40 -0700)]
dumpstate: Remove FWDUMP_bcmdhd support
Bug:
35983944
Test: Manual
Change-Id: Ia527bbe950b0f569a07e68805684d11ba2f71c66
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Steven Moreland [Tue, 21 Mar 2017 22:47:56 +0000 (22:47 +0000)]
Merge "Update re hwservicemanager debugDump semantics."
am:
ed2debbb47
Change-Id: Ibcac4fabedc0f3a1b310d02510785e4c46261a3b
Treehugger Robot [Tue, 21 Mar 2017 22:42:44 +0000 (22:42 +0000)]
Merge "Update re hwservicemanager debugDump semantics."
Tim Murray [Tue, 21 Mar 2017 22:17:50 +0000 (22:17 +0000)]
Merge "binder: remove cgroup interactions"
am:
c12c6dca4e
Change-Id: I98cba352689749b2f5f4306453985dad83b98ed8
Treehugger Robot [Tue, 21 Mar 2017 22:09:50 +0000 (22:09 +0000)]
Merge "binder: remove cgroup interactions"
Steven Moreland [Tue, 21 Mar 2017 19:17:55 +0000 (12:17 -0700)]
Update re hwservicemanager debugDump semantics.
Test: internal boots, hidl_test, lshal works
Bug:
36414311
Change-Id: I572269a679dea3b6e985227f6727850f7dd33b58
Tim Murray [Tue, 7 Mar 2017 17:31:09 +0000 (09:31 -0800)]
binder: remove cgroup interactions
Having binder change cgroups on the fly is too expensive in the common case to be useful.
Test: builds
bug
34825105
Change-Id: Ia692c9d2ab261d852cb2fac8f27d6779d0e2b057
Andreas Gampe [Tue, 21 Mar 2017 15:48:26 +0000 (15:48 +0000)]
Merge "Installd: Clean up installd"
am:
da86f5aa93
Change-Id: I17553e106659ede717e277d4836a12972ef6b2a0
Treehugger Robot [Tue, 21 Mar 2017 15:42:57 +0000 (15:42 +0000)]
Merge "Installd: Clean up installd"
neo.he [Tue, 21 Mar 2017 03:48:36 +0000 (11:48 +0800)]
Add alpha channel for the EGLConfig
If the alpha channel is not assigned,the framebuffer will be Opaque.
And it will mask the underlying video and make the video invisible
when play video width mediaplayer
Issue: 258684
Test: media player
Change-Id: If756ad2aaa789f6ddb178333b3e8854f52c8eac3
Andreas Gampe [Tue, 21 Mar 2017 01:36:54 +0000 (18:36 -0700)]
Installd: Clean up installd
Remove unnecessary includes.
Bug:
36336122
Test: m
Test: Device boots
Test: Can install apps
Change-Id: Iebbe049221d650667385efeac972956269bd53c2
Calin Juravle [Thu, 16 Mar 2017 23:58:15 +0000 (23:58 +0000)]
Merge "Support profile guided compilation for secondary dex files"
am:
cb2e477f14
Change-Id: Ib763c8cf38a04243b1a4834a70b15a6533f7bf5d
Calin Juravle [Thu, 16 Mar 2017 23:53:55 +0000 (23:53 +0000)]
Merge "Support profile guided compilation for secondary dex files"
Calin Juravle [Thu, 9 Mar 2017 03:05:07 +0000 (19:05 -0800)]
Support profile guided compilation for secondary dex files
Test: adb shell cmd package bg-dexopt-job works for sercondary dex files
Bug:
26719109
Change-Id: I4011a780f65378c23a4631c07c37cdb4f5fee41e
Calin Juravle [Wed, 15 Mar 2017 22:22:02 +0000 (22:22 +0000)]
Merge "Use assignment instead of reset for profile unique_fd"
am:
fd695a61c1
Change-Id: Ifcf742625e9c05379b063ba5480db406a9b81459
Calin Juravle [Wed, 15 Mar 2017 22:15:00 +0000 (22:15 +0000)]
Merge "Use assignment instead of reset for profile unique_fd"
Calin Juravle [Wed, 15 Mar 2017 20:20:39 +0000 (13:20 -0700)]
Use assignment instead of reset for profile unique_fd
Using reset with a unique_fd will just convert the unique_fd to int
without releasing it.
Test: adb shell cmd package compile -m speed-profile com.google.android.googlequicksearchbox
Bug:
36234017
Change-Id: I577197ac4a147765191777a5ebc6ef150dea1027
Dan Albert [Wed, 15 Mar 2017 20:20:14 +0000 (20:20 +0000)]
Merge "Drop non-API headers from the NDK vulkan headers."
am:
c416f2eb23
Change-Id: I72c6dd7f474010b5410209efad69b0c3fbc88f85
Treehugger Robot [Wed, 15 Mar 2017 20:13:10 +0000 (20:13 +0000)]
Merge "Drop non-API headers from the NDK vulkan headers."
Marissa Wall [Wed, 15 Mar 2017 00:50:33 +0000 (00:50 +0000)]
Merge "test-hwc2: fix build errors on other branches"
am:
ea8d46f1ab
Change-Id: I15fb43deec4eac3bb2867fa4dd101606cb593389
Treehugger Robot [Wed, 15 Mar 2017 00:45:27 +0000 (00:45 +0000)]
Merge "test-hwc2: fix build errors on other branches"
Dan Albert [Tue, 14 Mar 2017 21:22:05 +0000 (14:22 -0700)]
Drop non-API headers from the NDK vulkan headers.
The other headers in this directory are just for the platform and
shouldn't be in the NDK. Fortunately we never exposed the symbols in
the stub libraries so users couldn't actually do anything with the
other headers, but we shouldn't be exposing these headers anyway.
Test: make checkbuild
Bug: http://b/
36224616
Change-Id: I9e162964e349a256e7c7ad25eca3c33c5631e2c8
Marissa Wall [Tue, 14 Mar 2017 19:30:35 +0000 (12:30 -0700)]
test-hwc2: fix build errors on other branches
Currently, test-hwc2 does not build on other branches due to
differences in GraphicBufferAlloc. Switch to directly allocating
graphic buffers.
Test: run the test-hwc2 tests
Change-Id: I63a058a9b0bf48d1e3236f5e124ecaa1dfb4593a
Calin Juravle [Tue, 14 Mar 2017 02:22:27 +0000 (02:22 +0000)]
Merge "Use unique_fd instead of fd_t when managing profiles"
am:
02971e3348
Change-Id: I81a72601fe2507db09dd23fdb3527c0ed0dd02df
Calin Juravle [Tue, 14 Mar 2017 02:17:44 +0000 (02:17 +0000)]
Merge "Use unique_fd instead of fd_t when managing profiles"
Calin Juravle [Thu, 9 Mar 2017 22:33:33 +0000 (14:33 -0800)]
Use unique_fd instead of fd_t when managing profiles
Long due code improvement...
This will make things cleaner when adding support for secondary dex
profiles.
Test: adb shell cmd package bg-dexopt-job
Bug:
26719109
Change-Id: I232759d76c285c9eed9885f8ee4b84431fd65d15
Marissa Wall [Mon, 13 Mar 2017 17:58:32 +0000 (17:58 +0000)]
Merge changes from topic 'test-hwc2'
am:
29943c1971
Change-Id: I69fdf5bf2ff8f2c454e2e1a455e4d8d73b330aa3
Treehugger Robot [Mon, 13 Mar 2017 17:50:25 +0000 (17:50 +0000)]
Merge changes from topic 'test-hwc2'
* changes:
test-hwc2: dump
test-hwc2: virtual displays
test-hwc2: color and hdr requests
test-hwc2: present display
test-hwc2: add client target support
test-hwc2: get and accept display changes
test-hwc2: validate display
test-hwc2: set layer visible region
test-hwc2: set layer buffer
test-hwc2: set layer surface damage
test-hwc2: set cursor position
test-hwc2: set layer color
test-hwc2: set layer source crop
test-hwc2: set layer display frame
test-hwc2: set layer z order
test-hwc2: set layer transform
test-hwc2: set layer plane alpha
test-hwc2: set layer dataspace
test-hwc2: set layer blend mode
test-hwc2: set layer composition type
test-hwc2: get display name
test-hwc2: enable vsync
test-hwc2: power mode support
test-hwc2: get and set active config
test-hwc2: get display configs and attributes
test-hwc2: create and destroy layers
test-hwc2: display type support
test-hwc2: register callback functions
test-hwc2: open and close hwc2 device
Jesse Hall [Sat, 11 Mar 2017 17:40:42 +0000 (17:40 +0000)]
Merge changes Ib6b72ca5,I8ea5dfb9,Iaf954877,I803bf9f4
am:
42f482e139
Change-Id: I777ac0dd59147dd8aa28d2093e6baab4d199be42
Treehugger Robot [Sat, 11 Mar 2017 17:37:15 +0000 (17:37 +0000)]
Merge changes Ib6b72ca5,I8ea5dfb9,Iaf954877,I803bf9f4
* changes:
vulkan: update Vulkan headers to 1.0.43
vulkan: update Vulkan headers to 1.0.42
vulkan: update Vulkan headers to 1.0.41
vulkan: update Vulkan headers to 1.0.39
Jesse Hall [Sat, 11 Mar 2017 05:01:57 +0000 (21:01 -0800)]
vulkan: update Vulkan headers to 1.0.43
Test: mmm frameworks/native/vulkan
Merged-In: Ib4fb6c279349c821384f73991105218e14dd6a79
Change-Id: Ib6b72ca50bff647552f1cad1e726d5398104ffe1
Jesse Hall [Sat, 11 Mar 2017 02:35:38 +0000 (18:35 -0800)]
vulkan: update Vulkan headers to 1.0.42
Test: mmm frameworks/native/vulkan
Merged-In: I9c41b483fbf48a7404b54bfe405c40b58422ea74
Change-Id: I8ea5dfb9ad79fee64032e9d90b21ee087e4e5baa
Jesse Hall [Tue, 7 Mar 2017 00:02:58 +0000 (16:02 -0800)]
vulkan: update Vulkan headers to 1.0.41
Includes some header reordering in generated code due to a new version
of clang-format.
Test: mmm frameworks/native/vulkan
Merged-In: I40372758fb7214a627ab686d8a3de6bf9beae205
Change-Id: Iaf9548776d3462fcd9bcc236be6966ecce265565
Jesse Hall [Mon, 6 Mar 2017 23:22:17 +0000 (15:22 -0800)]
vulkan: update Vulkan headers to 1.0.39
Test: make ; mmm frameworks/native/vulkan
Merged-In: Ic787ce171633dce0d17b3ba838d0c3441ac728c3
Change-Id: I803bf9f4cd0ca4db8579a5c28495e8a66088bae2
Steven Moreland [Sat, 11 Mar 2017 08:59:41 +0000 (08:59 +0000)]
Merge "dumpsys: remove usage of String16::std_string"
am:
561b4e5d89
Change-Id: Ie64c773351594a8925d32b5513e912418bcf35d7
Treehugger Robot [Sat, 11 Mar 2017 08:55:09 +0000 (08:55 +0000)]
Merge "dumpsys: remove usage of String16::std_string"
Calin Juravle [Sat, 11 Mar 2017 00:56:07 +0000 (00:56 +0000)]
Merge "Use std::string for profile operations instead of const char"
am:
7c7d888d94
Change-Id: I44676d7bc0b9297ccb920066284f371fa2e40c3c
Calin Juravle [Sat, 11 Mar 2017 00:50:30 +0000 (00:50 +0000)]
Merge "Use std::string for profile operations instead of const char"
Calin Juravle [Thu, 9 Mar 2017 21:19:42 +0000 (13:19 -0800)]
Use std::string for profile operations instead of const char
Will make things cleaner when adding secondary dex profile support.
Also, add tests to verify profile path creation.
Bug:
26719109
Test: /data/nativetest64/installd_utils_test/installd_utils_test
Change-Id: I8cb1a11cefee21f5001d2b729110696d52fc8323
Calin Juravle [Fri, 10 Mar 2017 22:15:00 +0000 (22:15 +0000)]
Merge changes I20d546fd,I15363803
am:
632dbe2c77
Change-Id: I5fe86348657aa5e7f733be63c2134af4fe4a5365
Calin Juravle [Fri, 10 Mar 2017 22:07:38 +0000 (22:07 +0000)]
Merge changes I20d546fd,I15363803
* changes:
Allow "android" package name.
Update is_valid_package_name() to match framework.
Jeff Sharkey [Wed, 8 Mar 2017 19:39:46 +0000 (12:39 -0700)]
Allow "android" package name.
Test: /data/nativetest64/installd_utils_test/installd_utils_test
Bug:
36062649
(cherry picked from commit
ab7ac8d5a04bd3f38b85ce20ae5bb382f2a26585)
Change-Id: I20d546fdd20813e96bcb5f061ca5b352dff44450
Jeff Sharkey [Wed, 8 Mar 2017 05:12:03 +0000 (22:12 -0700)]
Update is_valid_package_name() to match framework.
The framework has a new format for /data/app directory names in OC
to protect user privacy. This change updates the validation logic
in installd to support the new format.
For consistency the logic now mirrors the package name validation
logic used by PackageParser.
Test: /data/nativetest64/installd_utils_test/installd_utils_test
Bug:
33705143
(cherry picked from commit
367ace2f77105f7a09b34a50bc875fd4fa591177)
Merged-In: I41d270942479c52e063c29a2cb9552d7b238b86e
Change-Id: I15363803fb45310697e29be810e800dc1b1902d0
Steven Moreland [Fri, 10 Mar 2017 06:59:32 +0000 (22:59 -0800)]
dumpsys: remove usage of String16::std_string
Test: pass
Change-Id: Ib74a126b91d25376a7235f73bbc12ada62ae7e69
Nicolas Geoffray [Thu, 9 Mar 2017 21:04:06 +0000 (21:04 +0000)]
Merge "Disable input-vdex when doing speed-profile."
am:
028ad63e80
Change-Id: I3ec636cd526bcdb749fc3af87f2ac0d301fbcafd
Nicolas Geoffray [Thu, 9 Mar 2017 20:56:53 +0000 (20:56 +0000)]
Merge "Disable input-vdex when doing speed-profile."
Nicolas Geoffray [Thu, 9 Mar 2017 13:11:25 +0000 (13:11 +0000)]
Disable input-vdex when doing speed-profile.
input-vdex and dexlayout are incompatible with each other.
bug:
36084905
bug:
36076104
bug:
36059948
bug:
35872504
Test: device boots, vdex works on OTA, input-vdex is not passed
for speed-profile.
Change-Id: I194311041899399db422867670f5e788d6b9ceeb
Yifan Hong [Thu, 9 Mar 2017 02:57:48 +0000 (02:57 +0000)]
Merge changes from topic 'vintf_arch'
am:
45370128a5
Change-Id: Ia8e62d1a64e5a893b651c46e5872854e2f52034f
Treehugger Robot [Thu, 9 Mar 2017 02:54:05 +0000 (02:54 +0000)]
Merge changes from topic 'vintf_arch'
* changes:
Update to use bitness info in VINTF.
Fix forEachTable will copy the table.
Yifan Hong [Wed, 8 Mar 2017 22:01:58 +0000 (14:01 -0800)]
Update to use bitness info in VINTF.
Bug:
35966597
Test: lshal -ir has bitness info for passthrough ref section
Test: lshal --init-vintf has bitness info in the manifest.
Change-Id: Ie9f52bb1ca30ce69856dbf44fab8287563014550
Yifan Hong [Wed, 8 Mar 2017 22:01:11 +0000 (14:01 -0800)]
Fix forEachTable will copy the table.
std::initializer_list<T> has T deduced to Table, which will
copy the table. Use pointers instead.
Test: pass
Change-Id: I7da40eb0f5d0171244a9b9caacf37b41fe0af304
Marissa Wall [Thu, 15 Dec 2016 20:42:07 +0000 (12:42 -0800)]
test-hwc2: dump
Test: Add "#define HAVE_NO_SURFACE_FLINGER" to
frameworks/native/libs/gui/BufferQueueCore.cpp.
Recompile and flash.
Run "mm" in frameworks/native/services/surfaceflinger/tests/hwc2.
Push test-hwc2 to device.
Run "adb root && adb shell stop".
Run test case. Ex: "./test-hwc2"
Change-Id: I0215fea464fd126b5f9041435bef7e00b46c6ac8
Marissa Wall [Tue, 21 Feb 2017 22:33:46 +0000 (14:33 -0800)]
test-hwc2: virtual displays
Test: Add "#define HAVE_NO_SURFACE_FLINGER" to
frameworks/native/libs/gui/BufferQueueCore.cpp.
Recompile and flash.
Run "mm" in frameworks/native/services/surfaceflinger/tests/hwc2.
Push test-hwc2 to device.
Run "adb root && adb shell stop".
Run test case. Ex: "./test-hwc2"
Change-Id: Ia10ec761712ee03f56782e3df2d6eabf7fb77760
Marissa Wall [Thu, 15 Dec 2016 20:41:06 +0000 (12:41 -0800)]
test-hwc2: color and hdr requests
Test: Add "#define HAVE_NO_SURFACE_FLINGER" to
frameworks/native/libs/gui/BufferQueueCore.cpp.
Recompile and flash.
Run "mm" in frameworks/native/services/surfaceflinger/tests/hwc2.
Push test-hwc2 to device.
Run "adb root && adb shell stop".
Run test case. Ex: "./test-hwc2"
Change-Id: Id515de0fac7e842724ae8f27e865fad4933256e6
Marissa Wall [Tue, 21 Feb 2017 22:01:05 +0000 (14:01 -0800)]
test-hwc2: present display
Test: Add "#define HAVE_NO_SURFACE_FLINGER" to
frameworks/native/libs/gui/BufferQueueCore.cpp.
Recompile and flash.
Run "mm" in frameworks/native/services/surfaceflinger/tests/hwc2.
Push test-hwc2 to device.
Run "adb root && adb shell stop".
Run test case. Ex: "./test-hwc2"
Change-Id: I845320afdf635d1716310d1183bcb10515615517
Marissa Wall [Tue, 21 Feb 2017 22:01:05 +0000 (14:01 -0800)]
test-hwc2: add client target support
Test: Add "#define HAVE_NO_SURFACE_FLINGER" to
frameworks/native/libs/gui/BufferQueueCore.cpp.
Recompile and flash.
Run "mm" in frameworks/native/services/surfaceflinger/tests/hwc2.
Push test-hwc2 to device.
Run "adb root && adb shell stop".
Run test case. Ex: "./test-hwc2"
Change-Id: I94c86795b2e334df0570c6c5a3cbbcb5a8ca2826
Marissa Wall [Thu, 15 Dec 2016 20:39:14 +0000 (12:39 -0800)]
test-hwc2: get and accept display changes
Test: Add "#define HAVE_NO_SURFACE_FLINGER" to
frameworks/native/libs/gui/BufferQueueCore.cpp.
Recompile and flash.
Run "mm" in frameworks/native/services/surfaceflinger/tests/hwc2.
Push test-hwc2 to device.
Run "adb root && adb shell stop".
Run test case. Ex: "./test-hwc2"
Change-Id: Ia1d1a0ee5fce43e7904ee49f13a86df0e7adc428