OSDN Git Service
Andrzej Hajda [Mon, 10 Oct 2016 07:39:17 +0000 (09:39 +0200)]
drm/bridge: add Silicon Image SiI8620 driver
SiI8620 transmitter converts eTMDS/HDMI signal to MHL 3.0.
It is controlled via I2C bus. Its interaction with other
devices in video pipeline is performed mainly on HW level.
The only interaction it does on device driver level is
filtering-out unsupported video modes, it exposes drm_bridge
interface to perform this operation.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476085157-5266-1-git-send-email-a.hajda@samsung.com
Andrzej Hajda [Fri, 7 Oct 2016 07:02:41 +0000 (09:02 +0200)]
dt-bindings: add Silicon Image SiI8620 bridge bindings
SiI8620 transmitter converts eTMDS/HDMI signal to MHL 3.0. It is controlled
via I2C bus.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1475823762-16237-3-git-send-email-a.hajda@samsung.com
Andrzej Hajda [Fri, 7 Oct 2016 07:02:40 +0000 (09:02 +0200)]
video: add header file for Mobile High-Definition Link (MHL) interface
This header adds definitions specific to MHL protocol.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1475823762-16237-2-git-send-email-a.hajda@samsung.com
Russell King [Wed, 19 Oct 2016 10:28:27 +0000 (11:28 +0100)]
drm: convert DT component matching to component_match_add_release()
Convert DT component matching to use component_match_add_release().
Acked-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/E1bwo6l-0005Io-Q1@rmk-PC.armlinux.org.uk
Chris Wilson [Tue, 25 Oct 2016 12:00:45 +0000 (13:00 +0100)]
dma-buf: Rename struct fence to dma_fence
I plan to usurp the short name of struct fence for a core kernel struct,
and so I need to rename the specialised fence/timeline for DMA
operations to make room.
A consensus was reached in
https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html
that making clear this fence applies to DMA operations was a good thing.
Since then the patch has grown a bit as usage increases, so hopefully it
remains a good thing!
(v2...: rebase, rerun spatch)
v3: Compile on msm, spotted a manual fixup that I broke.
v4: Try again for msm, sorry Daniel
coccinelle script:
@@
@@
- struct fence
+ struct dma_fence
@@
@@
- struct fence_ops
+ struct dma_fence_ops
@@
@@
- struct fence_cb
+ struct dma_fence_cb
@@
@@
- struct fence_array
+ struct dma_fence_array
@@
@@
- enum fence_flag_bits
+ enum dma_fence_flag_bits
@@
@@
(
- fence_init
+ dma_fence_init
|
- fence_release
+ dma_fence_release
|
- fence_free
+ dma_fence_free
|
- fence_get
+ dma_fence_get
|
- fence_get_rcu
+ dma_fence_get_rcu
|
- fence_put
+ dma_fence_put
|
- fence_signal
+ dma_fence_signal
|
- fence_signal_locked
+ dma_fence_signal_locked
|
- fence_default_wait
+ dma_fence_default_wait
|
- fence_add_callback
+ dma_fence_add_callback
|
- fence_remove_callback
+ dma_fence_remove_callback
|
- fence_enable_sw_signaling
+ dma_fence_enable_sw_signaling
|
- fence_is_signaled_locked
+ dma_fence_is_signaled_locked
|
- fence_is_signaled
+ dma_fence_is_signaled
|
- fence_is_later
+ dma_fence_is_later
|
- fence_later
+ dma_fence_later
|
- fence_wait_timeout
+ dma_fence_wait_timeout
|
- fence_wait_any_timeout
+ dma_fence_wait_any_timeout
|
- fence_wait
+ dma_fence_wait
|
- fence_context_alloc
+ dma_fence_context_alloc
|
- fence_array_create
+ dma_fence_array_create
|
- to_fence_array
+ to_dma_fence_array
|
- fence_is_array
+ dma_fence_is_array
|
- trace_fence_emit
+ trace_dma_fence_emit
|
- FENCE_TRACE
+ DMA_FENCE_TRACE
|
- FENCE_WARN
+ DMA_FENCE_WARN
|
- FENCE_ERR
+ DMA_FENCE_ERR
)
(
...
)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
Daniel Vetter [Tue, 25 Oct 2016 08:06:04 +0000 (10:06 +0200)]
Merge remote-tracking branch 'airlied/drm-next' into topic/drm-misc
Backmerge latest drm-next to have a baseline for the
s/fence/dma_fence/ patch from Chris.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Rob Clark [Mon, 24 Oct 2016 19:57:10 +0000 (15:57 -0400)]
dma-buf/fence: add an lockdep_assert_held()
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477339030-32657-1-git-send-email-robdclark@gmail.com
Imre Deak [Mon, 24 Oct 2016 16:33:24 +0000 (19:33 +0300)]
drm/dp: Factor out helper to distinguish between branch and sink devices
This check is open-coded in a few places, so it makes sense to simplify
things by having a helper for it similar to the rest of DPCD feature
helpers.
v2: (Jani)
- Move the helper to drm_dp_helper.h.
- Split out this change to a separate patch.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477326811-30431-2-git-send-email-imre.deak@intel.com
Dave Airlie [Tue, 25 Oct 2016 06:36:13 +0000 (16:36 +1000)]
Merge tag 'drm-intel-next-2016-10-24' of git://anongit.freedesktop.org/drm-intel into drm-next
- first slice of the gvt device model (Zhenyu et al)
- compression support for gpu error states (Chris)
- sunset clause on gpu errors resulting in dmesg noise telling users
how to report them
- .rodata diet from Tvrtko
- switch over lots of macros to only take dev_priv (Tvrtko)
- underrun suppression for dp link training (Ville)
- lspcon (hmdi 2.0 on skl/bxt) support from Shashank Sharma, polish
from Jani
- gen9 wm fixes from Paulo&Lyude
- updated ddi programming for kbl (Rodrigo)
- respect alternate aux/ddc pins (from vbt) for all ddi ports (Ville)
* tag 'drm-intel-next-2016-10-24' of git://anongit.freedesktop.org/drm-intel: (227 commits)
drm/i915: Update DRIVER_DATE to
20161024
drm/i915: Stop setting SNB min-freq-table 0 on powersave setup
drm/i915/dp: add lane_count check in intel_dp_check_link_status
drm/i915: Fix whitespace issues
drm/i915: Clean up DDI DDC/AUX CH sanitation
drm/i915: Respect alternate_ddc_pin for all DDI ports
drm/i915: Respect alternate_aux_channel for all DDI ports
drm/i915/gen9: Remove WaEnableYV12BugFixInHalfSliceChicken7
drm/i915: KBL - Recommended buffer translation programming for DisplayPort
drm/i915: Move down skl/kbl ddi iboost and n_edp_entires fixup
drm/i915: Add a sunset clause to GPU hang logging
drm/i915: Stop reporting error details in dmesg as well as the error-state
drm/i915/gvt: do not ignore return value of create_scratch_page
drm/i915/gvt: fix spare warnings on odd constant _Bool cast
drm/i915/gvt: mark symbols static where possible
drm/i915/gvt: fix sparse warnings on different address spaces
drm/i915/gvt: properly access enabled intel_engine_cs
drm/i915/gvt: Remove defunct vmap_batch()
drm/i915/gvt: Use common mapping routines for shadow_bb object
drm/i915/gvt: Use common mapping routines for indirect_ctx object
...
Dave Airlie [Tue, 25 Oct 2016 06:35:20 +0000 (16:35 +1000)]
Merge tag 'topic/drm-misc-2016-10-24' of git://anongit.freedesktop.org/drm-intel into drm-next
First -misc pull for 4.10:
- drm_format rework from Laurent
- reservation patches from Chris that missed 4.9.
- aspect ratio support in infoframe helpers and drm mode/edid code
(Shashank Sharma)
- rotation rework from Ville (first parts at least)
- another attempt at the CRC debugfs interface from Tomeu
- piles and piles of misc patches all over
* tag 'topic/drm-misc-2016-10-24' of git://anongit.freedesktop.org/drm-intel: (55 commits)
drm: Use u64 for intermediate dotclock calculations
drm/i915: Use the per-plane rotation property
drm/omap: Use per-plane rotation property
drm/omap: Set rotation property initial value to BIT(DRM_ROTATE_0) insted of 0
drm/atmel-hlcdc: Use per-plane rotation property
drm/arm: Use per-plane rotation property
drm: Add support for optional per-plane rotation property
drm/atomic: Reject attempts to use multiple rotation angles at once
drm: Add drm_rotation_90_or_270()
dma-buf/sync_file: hold reference to fence when creating sync_file
drm/virtio: kconfig: Fixup white space.
drm/fence: release fence reference when canceling event
drm/i915: Handle early failure during intel_get_load_detect_pipe
drm/fb_cma_helper: do not free fbdev if there is none
drm: fix sparse warnings on undeclared symbols in crc debugfs
gpu: Remove depends on RESET_CONTROLLER when not a provider
i915: don't call drm_atomic_state_put on invalid pointer
drm: Don't export the drm_fb_get_bpp_depth() function
drm/arm: mali-dp: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp()
drm: vmwgfx: Replace drm_fb_get_bpp_depth() with drm_format_info()
...
Chris Wilson [Mon, 24 Oct 2016 11:38:21 +0000 (12:38 +0100)]
drm/edid: Only print the bad edid when aborting
Currently, if drm.debug is enabled, we get a DRM_ERROR message on the
intermediate edid reads. This causes transient failures in CI which
flags up the sporadic EDID read failures, which are recovered by
rereading the EDID automatically. This patch combines the reporting done
by drm_do_get_edid() itself with the bad block printing from
get_edid_block(), into a single warning associated with the connector
once all attempts to retrieve the EDID fail.
v2: Print the whole EDID, marking up the bad/zero blocks. This requires
recording the whole of the raw edid, then a second pass to reduce it to
the valid extensions.
v3: Fix invalid/valid extension fumble.
References: https://bugs.freedesktop.org/show_bug.cgi?id=98228
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161024113821.26263-1-chris@chris-wilson.co.uk
Baoyou Xie [Sat, 22 Oct 2016 09:17:45 +0000 (17:17 +0800)]
drm/msm: add missing header dependencies
We get 2 warnings when building kernel with W=1:
drivers/gpu/drm/msm/msm_debugfs.c:141:5: warning: no previous prototype for 'msm_debugfs_init' [-Wmissing-prototypes]
drivers/gpu/drm/msm/msm_debugfs.c:158:6: warning: no previous prototype for 'msm_debugfs_cleanup' [-Wmissing-prototypes]
In fact, these functions are declared in
drivers/gpu/drm/msm/msm_debugfs.h.
So this patch adds missing header dependencies.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477127865-9381-2-git-send-email-baoyou.xie@linaro.org
Baoyou Xie [Sat, 22 Oct 2016 09:17:44 +0000 (17:17 +0800)]
drm/msm/adreno: move function declarations to header file
We get 2 warnings when building kernel with W=1:
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:535:17: warning: no previous prototype for 'a3xx_gpu_init' [-Wmissing-prototypes]
drivers/gpu/drm/msm/adreno/a4xx_gpu.c:624:17: warning: no previous prototype for 'a4xx_gpu_init' [-Wmissing-prototypes]
In fact, both functions are declared in
drivers/gpu/drm/msm/adreno/adreno_device.c, but should be declared
in a header file. So this patch moves both function declarations to
drivers/gpu/drm/msm/adreno/adreno_gpu.h.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477127865-9381-1-git-send-email-baoyou.xie@linaro.org
Baoyou Xie [Sat, 22 Oct 2016 09:14:42 +0000 (17:14 +0800)]
drm/i2c/tda998x: mark symbol static where possible
We get 1 warning when building kernel with W=1:
drivers/gpu/drm/i2c/tda998x_drv.c:1292:5: warning: no previous prototype for 'tda998x_audio_digital_mute' [-Wmissing-prototypes]
In fact, this function is only used in the file in which it is
declared and don't need a declaration, but can be made static.
So this patch marks this function with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477127682-3615-1-git-send-email-baoyou.xie@linaro.org
Daniel Vetter [Mon, 24 Oct 2016 06:25:36 +0000 (08:25 +0200)]
drm/i915: Update DRIVER_DATE to
20161024
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Stephen Hemminger [Sun, 23 Oct 2016 16:30:44 +0000 (09:30 -0700)]
doc: add missing docbook parameter for fence-array
Fixes 'make htmldocs' warning.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161023093044.324edfb6@xeon-e3
Linus Torvalds [Mon, 24 Oct 2016 00:10:14 +0000 (17:10 -0700)]
Linux 4.9-rc2
Linus Torvalds [Sun, 23 Oct 2016 23:58:55 +0000 (16:58 -0700)]
Merge tag 'upstream-4.9-rc2' of git://git.infradead.org/linux-ubifs
Pull UBI[FS] fixes from Richard Weinberger:
"This contains fixes for issues in both UBI and UBIFS:
- Fallout from the merge window, refactoring UBI code introduced some
issues.
- Fixes for an UBIFS readdir bug which can cause getdents() to busy
loop for ever and a bug in the UBIFS xattr code"
* tag 'upstream-4.9-rc2' of git://git.infradead.org/linux-ubifs:
ubifs: Abort readdir upon error
UBI: Fix crash in try_recover_peb()
ubi: fix swapped arguments to call to ubi_alloc_aeb
ubifs: Fix xattr_names length in exit paths
ubifs: Rename ubifs_rename2
Linus Torvalds [Sun, 23 Oct 2016 23:52:19 +0000 (16:52 -0700)]
Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A few bug fixes and add some missing KERN_CONT annotations"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: add missing KERN_CONT to a few more debugging uses
fscrypto: lock inode while setting encryption policy
ext4: correct endianness conversion in __xattr_check_inode()
fscrypto: make XTS tweak initialization endian-independent
ext4: do not advertise encryption support when disabled
jbd2: fix incorrect unlock on j_list_lock
ext4: super.c: Update logging style using KERN_CONT
Linus Torvalds [Sun, 23 Oct 2016 23:37:58 +0000 (16:37 -0700)]
Merge git://git./linux/kernel/git/nab/target-pending
Pull SCSI target fixes from Nicholas Bellinger:
"Here are the outstanding target-pending fixes for v4.9-rc2.
This includes:
- Fix v4.1.y+ reference leak regression with concurrent TMR
ABORT_TASK + session shutdown. (Vaibhav Tandon)
- Enable tcm_fc w/ SCF_USE_CPUID to avoid host exchange timeouts
(Hannes)
- target/user error sense handling fixes. (Andy + MNC + HCH)
- Fix iscsi-target NOP_OUT error path iscsi_cmd descriptor leak
(Varun)
- Two EXTENDED_COPY SCSI status fixes for ESX VAAI (Dinesh Israni +
Nixon Vincent)
- Revert a v4.8 residual overflow change, that breaks sg_inq with
small allocation lengths.
There are a number of folks stress testing the v4.1.y regression fix
in their environments, and more folks doing iser-target I/O stress
testing atop recent v4.x.y code.
There is also one v4.2.y+ RCU conversion regression related to
explicit NodeACL configfs changes, that is still being tracked down"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target/tcm_fc: use CPU affinity for responses
target/tcm_fc: Update debugging statements to match libfc usage
target/tcm_fc: return detailed error in ft_sess_create()
target/tcm_fc: print command pointer in debug message
target: fix potential race window in target_sess_cmd_list_waiting()
Revert "target: Fix residual overflow handling in target_complete_cmd_with_length"
target: Don't override EXTENDED_COPY xcopy_pt_cmd SCSI status code
target: Make EXTENDED_COPY 0xe4 failure return COPY TARGET DEVICE NOT REACHABLE
target: Re-add missing SCF_ACK_KREF assignment in v4.1.y
iscsi-target: fix iscsi cmd leak
iscsi-target: fix spelling mistake "Unsolicitied" -> "Unsolicited"
target/user: Fix comments to not refer to data ring
target/user: Return an error if cmd data size is too large
target/user: Use sense_reason_t in tcmu_queue_cmd_ring
Linus Torvalds [Sun, 23 Oct 2016 23:21:28 +0000 (16:21 -0700)]
Merge tag 'hwmon-for-linus-v4.9-rc2' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Couple of hwmon fixes:
Fix a potential ERR_PTR dereference in max31790 driver, and handle
temperature readings below 0 in adm9240 driver"
* tag 'hwmon-for-linus-v4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (max31790) potential ERR_PTR dereference
hwmon: (adm9240) handle temperature readings below 0
Linus Torvalds [Sun, 23 Oct 2016 22:56:23 +0000 (15:56 -0700)]
Merge tag 'for-linus-4.9-2' of git://git.code.sf.net/p/openipmi/linux-ipmi
Pull IPMI updates from Corey Minyard:
"A small bug fix and a new driver for acting as an IPMI device.
I was on vacation during the merge window (a long vacation) but this
is a bug fix that should go in and a new driver that shouldn't hurt
anything.
This has been in linux-next for a month or so"
* tag 'for-linus-4.9-2' of git://git.code.sf.net/p/openipmi/linux-ipmi:
ipmi: fix crash on reading version from proc after unregisted bmc
ipmi/bt-bmc: remove redundant return value check of platform_get_resource()
ipmi/bt-bmc: add a dependency on ARCH_ASPEED
ipmi: Fix ioremap error handling in bt-bmc
ipmi: add an Aspeed BT IPMI BMC driver
Linus Torvalds [Sat, 22 Oct 2016 17:23:15 +0000 (10:23 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"This updates contains:
- A revert which addresses a boot failure on ARM Sun5i platforms
- A new clocksource driver, which has been delayed beyond rc1 due to
an interrupt driver issue which was unearthed by this driver. The
debugging of that issue and the discussion about the proper
solution made this driver miss the merge window. There is no point
in delaying it for a full cycle as it completes the basic mainline
support for the new JCore platform and does not create any risk
outside of that platform"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "clocksource/drivers/timer_sun5i: Replace code by clocksource_mmio_init"
clocksource: Add J-Core timer/clocksource driver
of: Add J-Core timer bindings
Linus Torvalds [Sat, 22 Oct 2016 16:58:49 +0000 (09:58 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Three fixes, a hw-enablement and a cross-arch fix/enablement change:
- SGI/UV fix for older platforms
- x32 signal handling fix
- older x86 platform bootup APIC fix
- AVX512-4VNNIW (Neural Network Instructions) and AVX512-4FMAPS
(Multiply Accumulation Single precision instructions) enablement.
- move thread_info back into x86 specific code, to make life easier
for other architectures trying to make use of
CONFIG_THREAD_INFO_IN_TASK_STRUCT=y"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/smp: Don't try to poke disabled/non-existent APIC
sched/core, x86: Make struct thread_info arch specific again
x86/signal: Remove bogus user_64bit_mode() check from sigaction_compat_abi()
x86/platform/UV: Fix support for EFI_OLD_MEMMAP after BIOS callback updates
x86/cpufeature: Add AVX512_4VNNIW and AVX512_4FMAPS features
x86/vmware: Skip timer_irq_works() check on VMware
Linus Torvalds [Sat, 22 Oct 2016 16:39:10 +0000 (09:39 -0700)]
Merge branch 'mm-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull vmap stack fixes from Ingo Molnar:
"This is fallout from CONFIG_HAVE_ARCH_VMAP_STACK=y on x86: stack
accesses that used to be just somewhat questionable are now totally
buggy.
These changes try to do it without breaking the ABI: the fields are
left there, they are just reporting zero, or reporting narrower
information (the maps file change)"
* 'mm-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mm: Change vm_is_stack_for_task() to vm_is_stack_for_current()
fs/proc: Stop trying to report thread stacks
fs/proc: Stop reporting eip and esp in /proc/PID/stat
mm/numa: Remove duplicated include from mprotect.c
Linus Torvalds [Sat, 22 Oct 2016 16:33:51 +0000 (09:33 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Mostly irqchip driver fixes, plus a symbol export"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kernel/irq: Export irq_set_parent()
irqchip/gic: Add missing \n to CPU IF adjustment message
irqchip/jcore: Don't show Kconfig menu item for driver
irqchip/eznps: Drop pointless static qualifier in nps400_of_init()
irqchip/gic-v3-its: Fix entry size mask for GITS_BASER
irqchip/gic-v3-its: Fix 64bit GIC{R,ITS}_TYPER accesses
Linus Torvalds [Sat, 22 Oct 2016 16:32:10 +0000 (09:32 -0700)]
Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Add Ard Biesheuvel as EFI co-maintainer, plus fix an ARM build bug
with older toolchains"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/arm: Fix absolute relocation detection for older toolchains
MAINTAINERS: Add myself as EFI maintainer
Ville Syrjälä [Sat, 22 Oct 2016 02:18:04 +0000 (05:18 +0300)]
x86/boot/smp: Don't try to poke disabled/non-existent APIC
Apparently trying to poke a disabled or non-existent APIC
leads to a box that doesn't even boot. Let's not do that.
No real clue if this is the right fix, but at least my
P3 machine boots again.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: dyoung@redhat.com
Cc: kexec@lists.infradead.org
Cc: stable@vger.kernel.org
Fixes:
2a51fe083eba ("arch/x86: Handle non enumerated CPU after physical hotplug")
Link: http://lkml.kernel.org/r/1477102684-5092-1-git-send-email-ville.syrjala@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ville Syrjälä [Fri, 21 Oct 2016 19:22:45 +0000 (22:22 +0300)]
drm: RIP mode_config->rotation_property
Now that all drivers have been converted over to the per-plane rotation
property, we can just nuke the global rotation property.
v2: Rebase due to BIT(),__builtin_ffs() & co.
Deal with superfluous code shuffling
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477077768-4274-4-git-send-email-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 21 Oct 2016 19:22:44 +0000 (22:22 +0300)]
drm/msm/mdp5: Advertize 180 degree rotation
Since the hardware can apparently do both X and Y reflection, we
can advertize also 180 degree rotation as thats just X+Y reflection.
v2: Drop the BIT()
Cc: Rob Clark <robdclark@gmail.com>
Cc: Jilai Wang <jilaiw@codeaurora.org>
Cc: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477077768-4274-3-git-send-email-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 21 Oct 2016 19:22:43 +0000 (22:22 +0300)]
drm/msm/mdp5: Use per-plane rotation property
The global mode_config.rotation_property is going away, switch over to
per-plane rotation_property.
v2: Drop the BIT()
Cc: Rob Clark <robdclark@gmail.com>
Cc: Jilai Wang <jilaiw@codeaurora.org>
Cc: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477077768-4274-2-git-send-email-ville.syrjala@linux.intel.com
Chris Wilson [Fri, 21 Oct 2016 20:55:31 +0000 (21:55 +0100)]
drm/i915: Stop setting SNB min-freq-table 0 on powersave setup
The min-freq-table is an array of values that match each CPU frequency to
an equivalent GPU frequency. Setting a single value of 0 on init is both
illegal (generates an error from the PCU) and nonsensical. Let's see if
we survive without that error.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161021205531.8651-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Linus Torvalds [Sat, 22 Oct 2016 02:13:00 +0000 (19:13 -0700)]
Merge tag 'powerpc-4.9-3' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fixes marked for stable:
- Prevent unlikely crash in copro_calculate_slb() (Frederic Barrat)
- cxl: Prevent adapter reset if an active context exists (Vaibhav Jain)
Fixes for code merged this cycle:
- Fix boot on systems with uncompressed kernel image (Heiner Kallweit)
- Drop dump_numa_memory_topology() (Michael Ellerman)
- Fix numa topology console print (Aneesh Kumar K.V)
- Ignore the pkey system calls for now (Stephen Rothwell)"
* tag 'powerpc-4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Ignore the pkey system calls for now
powerpc: Fix numa topology console print
powerpc/mm: Drop dump_numa_memory_topology()
cxl: Prevent adapter reset if an active context exists
powerpc/boot: Fix boot on systems with uncompressed kernel image
powerpc/mm: Prevent unlikely crash in copro_calculate_slb()
Linus Torvalds [Sat, 22 Oct 2016 02:09:29 +0000 (19:09 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM:
- avoid livelock when walking guest page tables
- fix HYP mode static keys without CC_HAVE_ASM_GOTO
MIPS:
- fix a build error without TRACEPOINTS_ENABLED
s390:
- reject a malformed userspace configuration
x86:
- suppress a warning without CONFIG_CPU_FREQ
- initialize whole irq_eoi array"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
arm/arm64: KVM: Map the BSS at HYP
arm64: KVM: Take S1 walks into account when determining S2 write faults
KVM: s390: reject invalid modes for runtime instrumentation
kvm: x86: memset whole irq_eoi
kvm/x86: Fix unused variable warning in kvm_timer_init()
KVM: MIPS: Add missing uaccess.h include
Linus Torvalds [Sat, 22 Oct 2016 02:06:59 +0000 (19:06 -0700)]
Merge tag 'nfs-for-4.9-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client bugfixes from Anna Schumaker:
"Just two bugfixes this time:
Stable bugfix:
- Fix last_write_offset incorrectly set to page boundary
Other bugfix:
- Fix missing-braces warning"
* tag 'nfs-for-4.9-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
nfs4: fix missing-braces warning
pnfs/blocklayout: fix last_write_offset incorrectly set to page boundary
Linus Torvalds [Fri, 21 Oct 2016 22:54:45 +0000 (15:54 -0700)]
Merge tag 'acpi-4.9-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix an issue related to system resume in the new WDAT-based
watchdog driver and a return value of a stub function in the ACPI CPPC
framework.
Specifics:
- Update the ACPI WDAT-based watchdog driver to ping the hardware
during system resume to prevent a reset from occurring after the
resume is complete (Mika Westerberg).
- Fix the return value of the pcc_mbox_request_channel() stub for
CONFIG_PCC unset (Hoan Tran)"
* tag 'acpi-4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
watchdog: wdat_wdt: Ping the watchdog on resume
mailbox: PCC: Fix return value of pcc_mbox_request_channel()
Rafael J. Wysocki [Fri, 21 Oct 2016 20:24:23 +0000 (22:24 +0200)]
Merge branches 'acpi-wdat' and 'acpi-cppc'
* acpi-wdat:
watchdog: wdat_wdt: Ping the watchdog on resume
* acpi-cppc:
mailbox: PCC: Fix return value of pcc_mbox_request_channel()
Thomas Gleixner [Fri, 21 Oct 2016 19:40:29 +0000 (21:40 +0200)]
Merge tag 'gic-fixes-for-4.9-rc2' of git://git./linux/kernel/git/maz/arm-platforms into irq/urgent
Pull GIC updates from Marc Zyngier:
- Fix for 32bit accesses that should be 64bit on 64bit machines
- Fix for a field decoding macro
- Beautify a warning message
Chris Wilson [Fri, 21 Oct 2016 14:15:40 +0000 (15:15 +0100)]
drm: Use u64 for intermediate dotclock calculations
We have reached the era where monitor bandwidths now exceed 31bits in
frequency calculations, though as we stored them in kHz units we are
safe from overflow in the modelines for some time.
[ 48.723720] UBSAN: Undefined behaviour in ../drivers/gpu/drm/drm_modes.c:325:49
[ 48.726943] signed integer overflow:
[ 48.728503] 2240 *
1000000 cannot be represented in type 'int'
Reported-by: Martin Liška <marxin.liska@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98372
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161021141540.26837-1-chris@chris-wilson.co.uk
Linus Torvalds [Fri, 21 Oct 2016 17:57:09 +0000 (10:57 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Five small fixes.
Some of these, like the nested spinlock overwriting saved flags and
the Kasan use after free look serious, but they seem not to have been
picked up in testing or seen in the field.
The biggest user visible issue is probably the wrong device handler
for Clariion, which means that alua doesn't bind to the array like it
should"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ipr: Fix async error WARN_ON
scsi: zfcp: spin_lock_irqsave() is not nestable
scsi: Remove one useless stack variable
scsi: Fix use-after-free
scsi: Replace wrong device handler name for CLARiiON arrays
Linus Torvalds [Fri, 21 Oct 2016 17:54:01 +0000 (10:54 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A set of fixes that missed the merge window, mostly due to me being
away around that time.
Nothing major here, a mix of nvme cleanups and fixes, and one fix for
the badblocks handling"
* 'for-linus' of git://git.kernel.dk/linux-block:
nvmet: use symbolic constants for CNS values
nvme: use symbolic constants for CNS values
nvme.h: add an enum for cns values
nvme.h: don't use uuid_be
nvme.h: resync with nvme-cli
nvme: Add tertiary number to NVME_VS
nvme : Add sysfs entry for NVMe CMBs when appropriate
nvme: don't schedule multiple resets
nvme: Delete created IO queues on reset
nvme: Stop probing a removed device
badblocks: fix overlapping check for clearing
Linus Torvalds [Fri, 21 Oct 2016 17:48:58 +0000 (10:48 -0700)]
Merge tag 'pci-v4.9-fixes-1' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"This includes:
- Fix for a Layerscape driver issue that causes a use-before-set
crash
- Maintainer update for the Synopsis prototyping device driver"
* tag 'pci-v4.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: designware-plat: Update author email address
PCI: layerscape: Fix drvdata usage before assignment
PCI: designware-plat: Change maintainer to Jose Abreu
Radim Krčmář [Fri, 21 Oct 2016 16:49:53 +0000 (18:49 +0200)]
Merge tag 'kvm-arm-for-4.9-rc2' of git://git./linux/kernel/git/kvmarm/kvmarm
KVM/ARM updates for 4.9-rc2
- Handle faults generated by the page table walker as being writes
- Map the BSS at EL2
Ville Syrjälä [Mon, 26 Sep 2016 16:30:56 +0000 (19:30 +0300)]
drm/i915: Use the per-plane rotation property
On certain platforms not all planes support the same set of
rotations/reflections, so let's use the per-plane property
for this.
This is already a problem on SKL when we use the legay cursor plane
as it only supports 0|180 whereas the universal planes support
0|90|180|270, and it will be a problem on CHV soon.
v2: Use drm_plane_create_rotation_property() helper
v3: Drop the BIT(), use INTEL_GEN()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-12-git-send-email-ville.syrjala@linux.intel.com
Marc Zyngier [Thu, 20 Oct 2016 09:17:21 +0000 (10:17 +0100)]
arm/arm64: KVM: Map the BSS at HYP
When used with a compiler that doesn't implement "asm goto"
(such as the AArch64 port of GCC 4.8), jump labels generate a
memory access to find out about the value of the key (instead
of just patching the code). The key itself is likely to be
stored in the BSS.
This is perfectly fine, except that we don't map the BSS at HYP,
leading to an exploding kernel at the first access. The obvious
fix is simply to map the BSS there (which should have been done
a long while ago, but hey...).
Reported-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Ville Syrjälä [Mon, 26 Sep 2016 16:30:52 +0000 (19:30 +0300)]
drm/omap: Use per-plane rotation property
The global mode_config.rotation_property is going away, switch over to
per-plane rotation_property.
Not sure I got the annoying crtc rotation_property handling right.
Might work, or migth not.
v2: Drop the BIT()
Don't create rotation property twice for each primary plane
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[danvet: Add comment per discussion between Tomi&Ville.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-8-git-send-email-ville.syrjala@linux.intel.com
Will Deacon [Thu, 29 Sep 2016 11:37:01 +0000 (12:37 +0100)]
arm64: KVM: Take S1 walks into account when determining S2 write faults
The WnR bit in the HSR/ESR_EL2 indicates whether a data abort was
generated by a read or a write instruction. For stage 2 data aborts
generated by a stage 1 translation table walk (i.e. the actual page
table access faults at EL2), the WnR bit therefore reports whether the
instruction generating the walk was a load or a store, *not* whether the
page table walker was reading or writing the entry.
For page tables marked as read-only at stage 2 (e.g. due to KSM merging
them with the tables from another guest), this could result in livelock,
where a page table walk generated by a load instruction attempts to
set the access flag in the stage 1 descriptor, but fails to trigger
CoW in the host since only a read fault is reported.
This patch modifies the arm64 kvm_vcpu_dabt_iswrite function to
take into account stage 2 faults in stage 1 walks. Since DBM cannot be
disabled at EL2 for CPUs that implement it, we assume that these faults
are always causes by writes, avoiding the livelock situation at the
expense of occasional, spurious CoWs.
We could, in theory, do a bit better by checking the guest TCR
configuration and inspecting the page table to see why the PTE faulted.
However, I doubt this is measurable in practice, and the threat of
livelock is real.
Cc: <stable@vger.kernel.org>
Cc: Julien Grall <julien.grall@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Ville Syrjälä [Mon, 26 Sep 2016 16:30:51 +0000 (19:30 +0300)]
drm/omap: Set rotation property initial value to BIT(DRM_ROTATE_0) insted of 0
0 isn't a valid rotation property value, so let's set the initial value
of the property to BIT(DRM_ROTATE_0) instead.
v2: Drop the BIT()
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-7-git-send-email-ville.syrjala@linux.intel.com
Ville Syrjälä [Mon, 26 Sep 2016 16:30:50 +0000 (19:30 +0300)]
drm/atmel-hlcdc: Use per-plane rotation property
The global mode_config.rotation_property is going away, switch over to
per-plane rotation_property.
v2: Propagate error upwards (Boris)
v3: Drop the BIT()
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-6-git-send-email-ville.syrjala@linux.intel.com
Ville Syrjälä [Mon, 26 Sep 2016 16:30:49 +0000 (19:30 +0300)]
drm/arm: Use per-plane rotation property
The global mode_config.rotation_property is going away, switch over to
per-plane rotation_property.
v2: Drop the BIT()
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-5-git-send-email-ville.syrjala@linux.intel.com
Ville Syrjälä [Mon, 26 Sep 2016 16:30:48 +0000 (19:30 +0300)]
drm: Add support for optional per-plane rotation property
Not all planes on the system may support the same rotations/reflections,
so make it possible to create a separate property for each plane.
This way userspace gets told exactly which rotations/reflections are
possible for each plane.
v2: Add drm_plane_create_rotation_property() helper
v3: Drop the BIT(), __builtin_ffs(x) - 1,
Moar WARNs for bad parameters
Deal with superfluous code shuffling
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-4-git-send-email-ville.syrjala@linux.intel.com
Ville Syrjälä [Mon, 26 Sep 2016 16:30:47 +0000 (19:30 +0300)]
drm/atomic: Reject attempts to use multiple rotation angles at once
The rotation property should only accept exactly one rotation angle
at once. Let's reject attempts to set none or multiple angles.
Testcase: igt/kms_rotation_crc/bad-rotation
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-3-git-send-email-ville.syrjala@linux.intel.com
Ville Syrjälä [Mon, 26 Sep 2016 16:30:46 +0000 (19:30 +0300)]
drm: Add drm_rotation_90_or_270()
We have intel_rotation_90_or_270() in i915 to check if the rotation is
90 or 270 degrees. Similar checks are elsewhere in drm, so let's move
the helper into a central place and use it everwhere.
v2: Drop the BIT()
Convert all new intel_rotation_90_or_270() calls
Deal with superfluous code shuffling
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-2-git-send-email-ville.syrjala@linux.intel.com
Linus Torvalds [Fri, 21 Oct 2016 16:14:35 +0000 (09:14 -0700)]
Merge tag 'drm-fixes-for-v4.9-rc2-part2' of git://people.freedesktop.org/~airlied/linux
Pull more drm fixes from Dave Airlie:
"Mainly some vmwgfx fixes, but also some fixes for armada, etnaviv and
fsl-dcu"
* tag 'drm-fixes-for-v4.9-rc2-part2' of git://people.freedesktop.org/~airlied/linux:
drm/fsl-dcu: enable pixel clock when enabling CRTC
drm/fsl-dcu: do not transfer registers in mode_set_nofb
drm/fsl-dcu: do not transfer registers on plane init
drm/fsl-dcu: enable TCON bypass mode by default
drm/vmwgfx: Adjust checks for null pointers in 13 functions
drm/vmwgfx: Use memdup_user() rather than duplicating its implementation
drm/vmwgfx: Use kmalloc_array() in vmw_surface_define_ioctl()
drm/vmwgfx: Avoid validating views on view destruction
drm/vmwgfx: Limit the user-space command buffer size
drm/vmwgfx: Remove a leftover debug printout
drm/vmwgfx: Allow resource relocations on byte boundaries
drm/vmwgfx: Enable SVGA_3D_CMD_DX_TRANSFER_FROM_BUFFER command
drm/vmwgfx: Remove call to reservation_object_test_signaled_rcu before wait
drm/vmwgfx: Replace numeric parameter like 0444 with macro
drm/etnaviv: block 64K of address space behind each cmdstream
drm/etnaviv: ensure write caches are flushed at end of user cmdstream
drm/armada: fix clock counts
Joao Pinto [Fri, 21 Oct 2016 09:31:48 +0000 (10:31 +0100)]
PCI: designware-plat: Update author email address
Although I am leaving Synopsys, I would like to keep working with the linux
kernel community and help in what you might find useful. For that I am
sending this patch to change my contact e-mail.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Gustavo Padovan [Wed, 19 Oct 2016 17:48:32 +0000 (15:48 -0200)]
dma-buf/sync_file: hold reference to fence when creating sync_file
fence referencing was out of balance. It was not taking any ref to the
fence at creating time, but it was putting a reference when freeing the
sync file.
This patch fixes the balancing issue by getting a reference for the fence
when creating the sync_file.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476899313-22241-1-git-send-email-gustavo@padovan.org
Peter Griffin [Sat, 8 Oct 2016 07:55:18 +0000 (08:55 +0100)]
drm/virtio: kconfig: Fixup white space.
Use tabs instead of spaces.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1475913318-12275-1-git-send-email-peter.griffin@linaro.org
Link: http://patchwork.freedesktop.org/patch/msgid/1476238699-25820-1-git-send-email-jiang.biao2@zte.com.cn
Gustavo Padovan [Thu, 20 Oct 2016 14:50:03 +0000 (12:50 -0200)]
drm/fence: release fence reference when canceling event
If the event gets canceled we also need to put away the fence
reference it holds.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1476975005-30441-3-git-send-email-gustavo@padovan.org
Matthew Auld [Wed, 19 Oct 2016 21:29:53 +0000 (22:29 +0100)]
drm/i915/dp: add lane_count check in intel_dp_check_link_status
Currently it's entirely possible to go through the link training step
without first determining the lane_count, which is silly since we end up
doing a bunch of aux transfers of size = 0, as highlighted by
WARN_ON(!msg->buffer != !msg->size), and can only ever result in a
'failed to update link training' message. This can be observed during
intel_dp_long_pulse where we can do the link training step, but before
we have had a chance to set the link params. To avoid this we add an
extra check for the lane_count in intel_dp_check_link_status, which
should prevent us from doing the link training step prematurely.
v2: add WARN_ON_ONCE and FIXME comment (Ville)
References: https://bugs.freedesktop.org/show_bug.cgi?id=97344
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476912593-10019-1-git-send-email-matthew.auld@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Ville Syrjälä [Tue, 11 Oct 2016 17:52:48 +0000 (20:52 +0300)]
drm/i915: Fix whitespace issues
Fix the poorly indented port parameters to the aux ctl and data
reg functions. This was fallout from the s/i915_mmio_reg_t/i915_reg_t/
that happened during the review of commit
f0f59a00a1c9 ("drm/i915:
Type safe register read/write")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-5-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Ville Syrjälä [Tue, 11 Oct 2016 17:52:47 +0000 (20:52 +0300)]
drm/i915: Clean up DDI DDC/AUX CH sanitation
Now that we use the AUX and GMBUS assignment from VBT for all ports,
let's clean up the sanitization of the port information a bit.
Previosuly we only did this for port E, and only complained about a
non-standard assignment for the other ports. But as we know that
non-standard assignments are a fact of life, let's expand the
sanitization to all the ports.
v2: Include a commit message, fix up the comments a bit
v3: Don't clobber other ports if the current port has no alternate aux ch/ddc pin
Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: Maarten Maathuis <madman2003@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=97877
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com> (v2)
Ville Syrjälä [Tue, 11 Oct 2016 17:52:46 +0000 (20:52 +0300)]
drm/i915: Respect alternate_ddc_pin for all DDI ports
The VBT provides the platform a way to mix and match the DDI ports vs.
GMBUS pins. Currently we only trust the VBT for DDI E, which I suppose
has no standard GMBUS pin assignment. However, there are machines out
there that use a non-standard mapping for the other ports as well.
Let's start trusting the VBT on this one for all ports on DDI platforms.
I've structured the code such that other platforms could easily start
using this as well, by simply filling in the ddi_port_info. IIRC there
may be CHV system that might actually need this.
v2: Include a commit message, include a debug message during init
Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: Maarten Maathuis <madman2003@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97877
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Ville Syrjälä [Tue, 11 Oct 2016 17:52:45 +0000 (20:52 +0300)]
drm/i915: Respect alternate_aux_channel for all DDI ports
The VBT provides the platform a way to mix and match the DDI ports vs.
AUX channels. Currently we only trust the VBT for DDI E, which has no
corresponding AUX channel of its own. However it is possible that some
board might use some non-standard DDI vs. AUX port routing even for
the other ports. Perhaps for signal routing reasons or something,
So let's generalize this and trust the VBT for all ports.
For now we'll limit this to DDI platforms, as we trust the VBT a bit
more there anyway when it comes to the DDI ports. I've structured
the code in a way that would allow us to easily expand this to
other platforms as well, by simply filling in the ddi_port_info.
v2: Drop whitespace changes, keep MISSING_CASE() for unknown
aux ch assignment, include a commit message, include debug
message during init
Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: Maarten Maathuis <madman2003@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=97877
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Arkadiusz Hiler [Thu, 20 Oct 2016 15:31:00 +0000 (17:31 +0200)]
drm/i915/gen9: Remove WaEnableYV12BugFixInHalfSliceChicken7
Dropping WA because it was for early steppings.
It is fixed in newer preproduction and all production revisions.
v2: add references, updated commit message
References: HSD#
2126385, HSD#
2131381, BSID#0764
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476977460-28088-1-git-send-email-arkadiusz.hiler@intel.com
Sudip Mukherjee [Thu, 6 Oct 2016 17:36:43 +0000 (23:06 +0530)]
kernel/irq: Export irq_set_parent()
The TPS65217 driver grew interrupt support which uses
irq_set_parent(). While it's not yet clear why this is used in the first
place, building the driver as a module fails with:
ERROR: ".irq_set_parent" [drivers/mfd/tps65217.ko] undefined!
The correctness of the driver change is still investigated, but for now
it's less trouble to export irq_set_parent() than dealing with the build
wreckage.
[ tglx: Rewrote changelog and made the export GPL ]
Fixes:
6556bdacf646 ("mfd: tps65217: Add support for IRQs")
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Marcin Niestroj <m.niestroj@grinn-global.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Lee Jones <lee.jones@linaro.org>
Link: http://lkml.kernel.org/r/1475775403-27207-1-git-send-email-sudipm.mukherjee@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Hannes Reinecke [Mon, 22 Aug 2016 08:54:11 +0000 (10:54 +0200)]
target/tcm_fc: use CPU affinity for responses
The libfc stack assigns exchange IDs based on the CPU the request
was received on, so we need to send the responses via the same CPU.
Otherwise the send logic gets confuses and responses will be delayed,
causing exchange timeouts on the initiator side.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Cc: stable@vger.kernel.org # 4.5+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Hannes Reinecke [Mon, 22 Aug 2016 08:54:10 +0000 (10:54 +0200)]
target/tcm_fc: Update debugging statements to match libfc usage
Update the debug statements to match those from libfc.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Hannes Reinecke [Mon, 22 Aug 2016 08:54:09 +0000 (10:54 +0200)]
target/tcm_fc: return detailed error in ft_sess_create()
Not every failure is due to out-of-memory; the ACLs might not be
set, too. So return a detailed error code in ft_sess_create()
instead of just a NULL pointer.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Hannes Reinecke [Mon, 22 Aug 2016 08:54:08 +0000 (10:54 +0200)]
target/tcm_fc: print command pointer in debug message
When allocating a new command we should add the pointer to the
debug statements; that allows us to match this with other debug
statements for handling data.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Hannes Reinecke [Mon, 22 Aug 2016 08:54:07 +0000 (10:54 +0200)]
target: fix potential race window in target_sess_cmd_list_waiting()
target_sess_cmd_list_waiting() might hit on a condition where
the kref for the command is already 0, but the destructor has
not been called yet (or is stuck in waiting for a spin lock).
Rather than leaving the command on the list we should explicitly
remove it to avoid race issues later on.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Dave Airlie [Fri, 21 Oct 2016 03:27:55 +0000 (13:27 +1000)]
Merge branch 'drm-etnaviv-fixes' of git://git.pengutronix.de/lst/linux into drm-fixes
2 more patches to stabilize the new MMUv2 support.
* 'drm-etnaviv-fixes' of git://git.pengutronix.de/lst/linux:
drm/etnaviv: block 64K of address space behind each cmdstream
drm/etnaviv: ensure write caches are flushed at end of user cmdstream
Dave Airlie [Fri, 21 Oct 2016 03:26:58 +0000 (13:26 +1000)]
Merge branch 'drm-vmwgfx-fixes' of ssh://people.freedesktop.org/~syeh/repos_linux into drm-fixes
vmwgfx cleanups and fixes.
* 'drm-vmwgfx-fixes' of ssh://people.freedesktop.org/~syeh/repos_linux:
drm/vmwgfx: Adjust checks for null pointers in 13 functions
drm/vmwgfx: Use memdup_user() rather than duplicating its implementation
drm/vmwgfx: Use kmalloc_array() in vmw_surface_define_ioctl()
drm/vmwgfx: Avoid validating views on view destruction
drm/vmwgfx: Limit the user-space command buffer size
drm/vmwgfx: Remove a leftover debug printout
drm/vmwgfx: Allow resource relocations on byte boundaries
drm/vmwgfx: Enable SVGA_3D_CMD_DX_TRANSFER_FROM_BUFFER command
drm/vmwgfx: Remove call to reservation_object_test_signaled_rcu before wait
drm/vmwgfx: Replace numeric parameter like 0444 with macro
Dave Airlie [Fri, 21 Oct 2016 03:26:15 +0000 (13:26 +1000)]
Merge branch 'drm-armada-fixes' of git://git.armlinux.org.uk/~rmk/linux-arm into drm-fixes
One small fix for Armada, where the clock prepare/enable counts were
going awry.
* 'drm-armada-fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
drm/armada: fix clock counts
Dave Airlie [Fri, 21 Oct 2016 03:25:28 +0000 (13:25 +1000)]
Merge branch 'fixes-for-v4.9-rc2' of git.agner.ch/git/linux-drm-fsl-dcu into drm-fixes
This are some fixes which I hoped to still get into v4.9. I used to
test them here since about 2 weeks and Meng came around to test it
on the second platform making use of this IP too, so they are well
tested now.
* 'fixes-for-v4.9-rc2' of http://git.agner.ch/git/linux-drm-fsl-dcu:
drm/fsl-dcu: enable pixel clock when enabling CRTC
drm/fsl-dcu: do not transfer registers in mode_set_nofb
drm/fsl-dcu: do not transfer registers on plane init
drm/fsl-dcu: enable TCON bypass mode by default
Mika Westerberg [Thu, 20 Oct 2016 15:03:36 +0000 (18:03 +0300)]
watchdog: wdat_wdt: Ping the watchdog on resume
It turns out we need to ping the watchdog hardware on resume when we
re-program it. Otherwise this causes inadvertent reset to trigger
right after the resume is complete.
Fixes:
058dfc767008 (ACPI / watchdog: Add support for WDAT hardware watchdog)
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Thu, 20 Oct 2016 22:32:51 +0000 (15:32 -0700)]
Merge tag 'pm-4.9-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"This fixes the pointer arithmetics mess-up in the cpufreq core
introduced by one of recent commits and leading to all kinds of
breakage from kernel crashes to incorrect governor decisions (Sergey
Senozhatsky)"
* tag 'pm-4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: fix overflow in cpufreq_table_find_index_dl()
Rodrigo Vivi [Tue, 18 Oct 2016 15:57:36 +0000 (08:57 -0700)]
drm/i915: KBL - Recommended buffer translation programming for DisplayPort
According to spec: "KBL re-uses SKL values, except where
specific KBL values are listed."
And recently spec has changed adding different table for Display Port only.
But for all SKUs (H,S,U,Y) we have slightly different values.
v2: Fix wrong condition spotted by Jani.
v3: Fix 7th entry of KBL H and S table - by Manasi.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476806256-13318-1-git-send-email-rodrigo.vivi@intel.com
Rodrigo Vivi [Fri, 30 Sep 2016 18:05:56 +0000 (11:05 -0700)]
drm/i915: Move down skl/kbl ddi iboost and n_edp_entires fixup
No functional change.
Only moving this fixup block out of ddi_translation definitions
so we can split skl and kbl cleanly.
v2: Remove useless comment. (Ville)
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475258757-29540-1-git-send-email-rodrigo.vivi@intel.com
Rafael J. Wysocki [Thu, 20 Oct 2016 21:24:58 +0000 (23:24 +0200)]
Merge branch 'pm-cpufreq'
* pm-cpufreq:
cpufreq: fix overflow in cpufreq_table_find_index_dl()
Chen-Yu Tsai [Tue, 18 Oct 2016 05:49:18 +0000 (13:49 +0800)]
Revert "clocksource/drivers/timer_sun5i: Replace code by clocksource_mmio_init"
struct clocksource is also used by the clk notifier callback, to
unregister and re-register the clocksource with a different clock rate.
clocksource_mmio_init does not pass back a pointer to the struct used,
and the clk notifier callback assumes that the struct clocksource in
struct sun5i_timer_clksrc is valid. This results in a kernel NULL
pointer dereference when the hstimer clock is changed:
Unable to handle kernel NULL pointer dereference at virtual address
00000004
[<
c03a4678>] (clocksource_unbind) from [<
c03a46d4>] (clocksource_unregister+0x2c/0x44)
[<
c03a46d4>] (clocksource_unregister) from [<
c0a6f350>] (sun5i_rate_cb_clksrc+0x34/0x3c)
[<
c0a6f350>] (sun5i_rate_cb_clksrc) from [<
c035ea50>] (notifier_call_chain+0x44/0x84)
[<
c035ea50>] (notifier_call_chain) from [<
c035edc0>] (__srcu_notifier_call_chain+0x44/0x60)
[<
c035edc0>] (__srcu_notifier_call_chain) from [<
c035edf4>] (srcu_notifier_call_chain+0x18/0x20)
[<
c035edf4>] (srcu_notifier_call_chain) from [<
c0670174>] (__clk_notify+0x70/0x7c)
[<
c0670174>] (__clk_notify) from [<
c06702c0>] (clk_propagate_rate_change+0xa4/0xc4)
[<
c06702c0>] (clk_propagate_rate_change) from [<
c0670288>] (clk_propagate_rate_change+0x6c/0xc4)
Revert the commit for now. clocksource_mmio_init can be made to pass back
a pointer, but the code churn and usage of an inner struct might not be
worth it.
Fixes:
157dfadef832 ("clocksource/drivers/timer_sun5i: Replace code by clocksource_mmio_init")
Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Cc: linux-sunxi@googlegroups.com
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20161018054918.26855-1-wens@csie.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Radim Krčmář [Thu, 20 Oct 2016 18:31:01 +0000 (20:31 +0200)]
Merge tag 'kvm-s390-master-4.9-1' of git://git./linux/kernel/git/kvms390/linux
KVM: s390: Fix for user-triggerable WARN_ON
A malicious user space can provide an invalid mode for runtime
instrumentation via the interfaces that are normally used on
the target host during migration. This would trigger a WARN_ON
via validity intercept. Let's detect this special case.
Rich Felker [Thu, 13 Oct 2016 21:51:06 +0000 (21:51 +0000)]
clocksource: Add J-Core timer/clocksource driver
At the hardware level, the J-Core PIT is integrated with the interrupt
controller, but it is represented as its own device and has an
independent programming interface. It provides a 12-bit countdown
timer, which is not presently used, and a periodic timer. The interval
length for the latter is programmable via a 32-bit throttle register
whose units are determined by a bus-period register. The periodic
timer is used to implement both periodic and oneshot clock event
modes; in oneshot mode the interrupt handler simply disables the timer
as soon as it fires.
Despite its device tree node representing an interrupt for the PIT,
the actual irq generated is programmable, not hard-wired. The driver
is responsible for programming the PIT to generate the hardware irq
number that the DT assigns to it.
On SMP configurations, J-Core provides cpu-local instances of the PIT;
no broadcast timer is needed. This driver supports the creation of the
necessary per-cpu clock_event_device instances.
A nanosecond-resolution clocksource is provided using the J-Core "RTC"
registers, which give a 64-bit seconds count and 32-bit nanoseconds
that wrap every second. The driver converts these to a full-range
32-bit nanoseconds count.
Signed-off-by: Rich Felker <dalias@libc.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Link: http://lkml.kernel.org/r/b591ff12cc5ebf63d1edc98da26046f95a233814.1476393790.git.dalias@libc.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Rich Felker [Thu, 13 Oct 2016 21:51:06 +0000 (21:51 +0000)]
of: Add J-Core timer bindings
Signed-off-by: Rich Felker <dalias@libc.org>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Link: http://lkml.kernel.org/r/8b107c292ed8cf8eed0fa283071fc8a930098628.1476393790.git.dalias@libc.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Christian Borntraeger [Wed, 28 Sep 2016 14:18:47 +0000 (16:18 +0200)]
KVM: s390: reject invalid modes for runtime instrumentation
Usually a validity intercept is a programming error of the host
because of invalid entries in the state description.
We can get a validity intercept if the mode of the runtime
instrumentation control block is wrong. As the host does not know
which modes are valid, this can be used by userspace to trigger
a WARN.
Instead of printing a WARN let's return an error to userspace as
this can only happen if userspace provides a malformed initial
value (e.g. on migration). The kernel should never warn on bogus
input. Instead let's log it into the s390 debug feature.
While at it, let's return -EINVAL for all validity intercepts as
this will trigger an error in QEMU like
error: kvm run failed Invalid argument
PSW=mask
0404c00180000000 addr
000000000063c226 cc 00
R00=
000000000000004f R01=
0000000000000004 R02=
0000000000760005 R03=
000000007fe0a000
R04=
000000000064ba2a R05=
000000049db73dd0 R06=
000000000082c4b0 R07=
0000000000000041
R08=
0000000000000002 R09=
000003e0804042a8 R10=
0000000496152c42 R11=
000000007fe0afb0
[...]
This will avoid an endless loop of validity intercepts.
Cc: stable@vger.kernel.org # v4.5+
Fixes:
c6e5f166373a ("KVM: s390: implement the RI support of guest")
Acked-by: Fan Zhang <zhangfan@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Linus Torvalds [Thu, 20 Oct 2016 17:17:13 +0000 (10:17 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Most of these are CC'd for stable, but there are a few fixing issues
introduced during the recent merge window too.
There's also a fix for the xgene PMU driver, but it seemed daft to
send as a separate pull request, so I've included it here with the
rest of the fixes.
- Fix ACPI boot due to recent broken NUMA changes
- Fix remote enabling of CPU features requiring PSTATE bit manipulation
- Add address range check when emulating user cache maintenance
- Fix LL/SC loops that allow compiler to introduce memory accesses
- Fix recently added write_sysreg_s macro
- Ensure MDCR_EL2 is initialised on qemu targets without a PMU
- Avoid kaslr breakage due to MODVERSIONs and DYNAMIC_FTRACE
- Correctly drive recent ld when building relocatable Image
- Remove junk IS_ERR check from xgene PMU driver added during merge window
- pr_cont fixes after core changes in the merge window"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: remove pr_cont abuse from mem_init
arm64: fix show_regs fallout from KERN_CONT changes
arm64: kernel: force ET_DYN ELF type for CONFIG_RELOCATABLE=y
arm64: suspend: Reconfigure PSTATE after resume from idle
arm64: mm: Set PSTATE.PAN from the cpu_enable_pan() call
arm64: cpufeature: Schedule enable() calls instead of calling them via IPI
arm64: Cortex-A53 errata workaround: check for kernel addresses
arm64: percpu: rewrite ll/sc loops in assembly
arm64: swp emulation: bound LL/SC retries before rescheduling
arm64: sysreg: Fix use of XZR in write_sysreg_s
arm64: kaslr: keep modules close to the kernel when DYNAMIC_FTRACE=y
arm64: kernel: Init MDCR_EL2 even in the absence of a PMU
perf: xgene: Remove bogus IS_ERR() check
arm64: kernel: numa: fix ACPI boot cpu numa node mapping
arm64: kaslr: fix breakage with CONFIG_MODVERSIONS=y
Linus Torvalds [Thu, 20 Oct 2016 16:57:51 +0000 (09:57 -0700)]
Merge tag 'ceph-for-4.9-rc2' of git://github.com/ceph/ceph-client
Pull Ceph fixes from Ilya Dryomov:
"An rbd exclusive-lock edge case fix and several filesystem fixups.
Nikolay's error path patch is tagged for stable, everything else but
readdir vs frags race was introduced in this merge window"
* tag 'ceph-for-4.9-rc2' of git://github.com/ceph/ceph-client:
ceph: fix non static symbol warning
ceph: fix uninitialized dentry pointer in ceph_real_mount()
ceph: fix readdir vs fragmentation race
ceph: fix error handling in ceph_read_iter
rbd: don't retry watch reregistration if header object is gone
rbd: don't wait for the lock forever if blacklisted
Linus Torvalds [Thu, 20 Oct 2016 15:59:12 +0000 (08:59 -0700)]
Merge tag 'mmc-v4.9-rc1' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"Here are some mmc fixes intended for v4.9 rc2.
This time I have also included a few changes for a memstick driver
which has a corresponding mmc driver. They use the same USB device as
parent, hence both needs to play nice with runtime PM, which they
didn't.
MMC core:
- Update MAINTAINERS as the mmc tree moved to kernel.org
- A few fixes for HS400es mode
- A few other minor fixes
MMC host:
- sdhci: Fix an issue when dealing with stop commands
- sdhci-pci: Fix a bus power failure issue
- sdhci-esdhc-imx: Correct two register accesses
- sdhci-of-arasan: Fix the 1.8V I/O signal switch behaviour
- rtsx_usb_sdmmc: Fix runtime PM issues
Other: (Because of no maintainer)
- memstick: rtsx_usb_ms: Fix runtime PM issues"
* tag 'mmc-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
MAINTAINERS: mmc: Move the mmc tree to kernel.org
memstick: rtsx_usb_ms: Manage runtime PM when accessing the device
memstick: rtsx_usb_ms: Runtime resume the device when polling for cards
mmc: rtsx_usb_sdmmc: Handle runtime PM while changing the led
mmc: rtsx_usb_sdmmc: Avoid keeping the device runtime resumed when unused
mmc: sdhci: cast unsigned int to unsigned long long to avoid unexpeted error
mmc: sdhci-esdhc-imx: Correct two register accesses
mmc: sdhci-pci: Fix bus power failing to enable for some Intel controllers
mmc: sdhci-pci: Let devices define their own sdhci_ops
mmc: sdhci: Rename sdhci_set_power() to sdhci_set_power_noreg()
mmc: sdhci: Fix SDHCI_QUIRK2_STOP_WITH_TC
mmc: core: Annotate cmd_hdr as __le32
mmc: sdhci-of-arasan: add sdhci_arasan_voltage_switch for arasan, 5.1
mmc: core: changes frequency to hs_max_dtr when selecting hs400es
mmc: core: switch to 1V8 or 1V2 for hs400es mode
mmc: block: add missing header dependencies
mmc: sdhci-of-arasan: Fix non static symbol warning
Linus Torvalds [Thu, 20 Oct 2016 15:49:03 +0000 (08:49 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-fs
Pull misc filesystem fixes from Jan Kara:
"A fix for an isofs change apparently breaking mount(8) in some cases
and one ext2 warning fix"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: avoid bogus -Wmaybe-uninitialized warning
isofs: Do not return EACCES for unknown filesystems
Radim Krčmář [Thu, 20 Oct 2016 15:26:53 +0000 (17:26 +0200)]
Merge tag 'kvm_mips_4.9_2' of git://git./linux/kernel/git/jhogan/kvm-mips
MIPS KVM fix for v4.9-rc2
- Fix build error introduced during the 4.9 merge window when
tracepoints are disabled.
Sergey Senozhatsky [Mon, 17 Oct 2016 15:41:12 +0000 (00:41 +0900)]
cpufreq: fix overflow in cpufreq_table_find_index_dl()
'best' is always less or equals to 'pos', so `best - pos' returns
a negative value which is then getting casted to `unsigned int'
and passed to __cpufreq_driver_target()->acpi_cpufreq_target()
for policy->freq_table selection. This results in
BUG: unable to handle kernel paging request at
ffff881019b469f8
IP: [<
ffffffffa00356c1>] acpi_cpufreq_target+0x4f/0x190 [acpi_cpufreq]
PGD
267f067
PUD 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 6 PID: 70 Comm: kworker/6:1 Not tainted 4.9.0-rc1-next-
20161017-dbg-dirty
Workqueue: events dbs_work_handler
task:
ffff88041b808000 task.stack:
ffff88041b810000
RIP: 0010:[<
ffffffffa00356c1>] [<
ffffffffa00356c1>] acpi_cpufreq_target+0x4f/0x190 [acpi_cpufreq]
RSP: 0018:
ffff88041b813c60 EFLAGS:
00010282
RAX:
ffff880419b46a00 RBX:
ffff88041b848400 RCX:
ffff880419b20f80
RDX:
00000000001dff38 RSI:
00000000ffffffff RDI:
ffff88041b848400
RBP:
ffff88041b813cb0 R08:
0000000000000006 R09:
0000000000000040
R10:
ffffffff8207f9e0 R11:
ffffffff8173595b R12:
0000000000000000
R13:
ffff88041f1dff38 R14:
0000000000262900 R15:
0000000bfffffff4
FS:
0000000000000000(0000) GS:
ffff88041f000000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffff881019b469f8 CR3:
000000041a2d3000 CR4:
00000000001406e0
Stack:
ffff88041b813cb0 ffffffff813347f9 ffff88041b813ca0 ffffffff81334663
ffff88041f1d4bc0 ffff88041b848400 0000000000000000 0000000000000000
0000000000262900 0000000000000000 ffff88041b813d00 ffffffff813355dc
Call Trace:
[<
ffffffff813347f9>] ? cpufreq_freq_transition_begin+0xf1/0xfc
[<
ffffffff81334663>] ? get_cpu_idle_time+0x97/0xa6
[<
ffffffff813355dc>] __cpufreq_driver_target+0x3b6/0x44e
[<
ffffffff81336ca3>] cs_dbs_timer+0x11a/0x135
[<
ffffffff81336fda>] dbs_work_handler+0x39/0x62
[<
ffffffff81057823>] process_one_work+0x280/0x4a5
[<
ffffffff81058719>] worker_thread+0x24f/0x397
[<
ffffffff810584ca>] ? rescuer_thread+0x30b/0x30b
[<
ffffffff81418380>] ? nl80211_get_key+0x29/0x36a
[<
ffffffff8105d2b7>] kthread+0xfc/0x104
[<
ffffffff8107ceea>] ? put_lock_stats.isra.9+0xe/0x20
[<
ffffffff8105d1bb>] ? kthread_create_on_node+0x3f/0x3f
[<
ffffffff814b2092>] ret_from_fork+0x22/0x30
Code: 56 4d 6b ff 0c 41 55 41 54 53 48 83 ec 28 48 8b 15 ad 1e 00 00 44 8b 41
08 48 8b 87 c8 00 00 00 49 89 d5 4e 03 2c c5 80 b2 78 81 <46> 8b 74 38 04 45
3b 75 00 75 11 31 c0 83 39 00 0f 84 1c 01 00
RIP [<
ffffffffa00356c1>] acpi_cpufreq_target+0x4f/0x190 [acpi_cpufreq]
RSP <
ffff88041b813c60>
CR2:
ffff881019b469f8
---[ end trace
16d9fc7a17897d37 ]---
[ rjw: In some cases this bug may also cause incorrect frequencies to
be selected by cpufreq governors. ]
Fixes:
899bb6642f2a (cpufreq: skip invalid entries when searching the frequency)
Link: http://marc.info/?l=linux-kernel&m=147672030714331&w=2
Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reported-and-tested-by: Jörg Otte <jrg.otte@gmail.com>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.8+ <stable@vger.kernel.org> # 4.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Mark Rutland [Thu, 20 Oct 2016 11:24:53 +0000 (12:24 +0100)]
arm64: remove pr_cont abuse from mem_init
All the lines printed by mem_init are independent, with each ending with
a newline. While they logically form a large block, none are actually
continuations of previous lines.
The kernel-side printk code and the userspace demsg tool differ in their
handling of KERN_CONT following a newline, and while this isn't always a
problem kernel-side, it does cause difficulty for userspace. Using
pr_cont causes the userspace tool to not print line prefix (e.g.
timestamps) even when following a newline, mis-aligning the output and
making it harder to read, e.g.
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
.text : 0xffff000008080000 - 0xffff0000088b0000 ( 8384 KB)
.rodata : 0xffff0000088b0000 - 0xffff000008c50000 ( 3712 KB)
.init : 0xffff000008c50000 - 0xffff000008d50000 ( 1024 KB)
.data : 0xffff000008d50000 - 0xffff000008e25200 ( 853 KB)
.bss : 0xffff000008e25200 - 0xffff000008e6bec0 ( 284 KB)
fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB)
PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
0xffff7e0000000000 - 0xffff7e0026000000 ( 608 MB actual)
memory : 0xffff800000000000 - 0xffff800980000000 ( 38912 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Fix this by using pr_notice consistently for all lines, which both the
kernel and userspace are happy with.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Mark Rutland [Thu, 20 Oct 2016 11:23:16 +0000 (12:23 +0100)]
arm64: fix show_regs fallout from KERN_CONT changes
Recently in commit
4bcc595ccd80decb ("printk: reinstate KERN_CONT for
printing continuation lines"), the behaviour of printk changed w.r.t.
KERN_CONT. Now, KERN_CONT is mandatory to continue existing lines.
Without this, prefixes are inserted, making output illegible, e.g.
[ 1007.069010] pc : [<
ffff00000871898c>] lr : [<
ffff000008718948>] pstate:
40000145
[ 1007.076329] sp :
ffff000008d53ec0
[ 1007.079606] x29:
ffff000008d53ec0 [ 1007.082797] x28:
0000000080c50018
[ 1007.086160]
[ 1007.087630] x27:
ffff000008e0c7f8 [ 1007.090820] x26:
ffff80097631ca00
[ 1007.094183]
[ 1007.095653] x25:
0000000000000001 [ 1007.098843] x24:
000000ea68b61cac
[ 1007.102206]
... or when dumped with the userpace dmesg tool, which has slightly
different implicit newline behaviour. e.g.
[ 1007.069010] pc : [<
ffff00000871898c>] lr : [<
ffff000008718948>] pstate:
40000145
[ 1007.076329] sp :
ffff000008d53ec0
[ 1007.079606] x29:
ffff000008d53ec0
[ 1007.082797] x28:
0000000080c50018
[ 1007.086160]
[ 1007.087630] x27:
ffff000008e0c7f8
[ 1007.090820] x26:
ffff80097631ca00
[ 1007.094183]
[ 1007.095653] x25:
0000000000000001
[ 1007.098843] x24:
000000ea68b61cac
[ 1007.102206]
We can't simply always use KERN_CONT for lines which may or may not be
continuations. That causes line prefixes (e.g. timestamps) to be
supressed, and the alignment of all but the first line will be broken.
For even more fun, we can't simply insert some dummy empty-string printk
calls, as GCC warns for an empty printk string, and even if we pass
KERN_DEFAULT explcitly to silence the warning, the prefix gets swallowed
unless there is an additional part to the string.
Instead, we must manually iterate over pairs of registers, which gives
us the legible output we want in either case, e.g.
[ 169.771790] pc : [<
ffff00000871898c>] lr : [<
ffff000008718948>] pstate:
40000145
[ 169.779109] sp :
ffff000008d53ec0
[ 169.782386] x29:
ffff000008d53ec0 x28:
0000000080c50018
[ 169.787650] x27:
ffff000008e0c7f8 x26:
ffff80097631de00
[ 169.792913] x25:
0000000000000001 x24:
00000027827b2cf4
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Daniel Vetter [Thu, 20 Oct 2016 13:15:42 +0000 (15:15 +0200)]
Merge tag 'gvt-next-fix-2016-10-20' of https://github.com/01org/gvt-linux into drm-intel-next-queued
gvt-next-fix-2016-10-20
This contains fix for first pull request.
- clean up header mess between i915 core and gvt
- new MAINTAINERS item
- new kernel-doc section
- fix compiling warnings
- gvt gem fix series from Chris
- fix for i915 intel_engine_cs change
- some sparse fixes from Changbin
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Chris Wilson [Fri, 14 Oct 2016 13:44:28 +0000 (14:44 +0100)]
drm/i915: Add a sunset clause to GPU hang logging
If the kernel is old, more than a few releases old, chances are that the
user is using an old kernel for a good reason, despite there being GPU
hangs. After 180days since driver release stop suggesting that they
should send those reports upstream.
[Since Daniel acked this I expect he will pick up the dim patch to
automatically update the DRIVER_TIMESTAMP everytime we tag a new
release.]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161014134428.29582-1-chris@chris-wilson.co.uk
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Jiri Slaby [Thu, 13 Oct 2016 15:45:20 +0000 (17:45 +0200)]
kvm: x86: memset whole irq_eoi
gcc 7 warns:
arch/x86/kvm/ioapic.c: In function 'kvm_ioapic_reset':
arch/x86/kvm/ioapic.c:597:2: warning: 'memset' used with length equal to number of elements without multiplication by element size [-Wmemset-elt-size]
And it is right. Memset whole array using sizeof operator.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[Added x86 subject tag]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Borislav Petkov [Sun, 4 Sep 2016 17:13:57 +0000 (19:13 +0200)]
kvm/x86: Fix unused variable warning in kvm_timer_init()
When CONFIG_CPU_FREQ is not set, int cpu is unused and gcc rightfully
warns about it:
arch/x86/kvm/x86.c: In function ‘kvm_timer_init’:
arch/x86/kvm/x86.c:5697:6: warning: unused variable ‘cpu’ [-Wunused-variable]
int cpu;
^~~
But since it is used only in the CONFIG_CPU_FREQ block, simply move it
there, thus squashing the warning too.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Chris Wilson [Wed, 19 Oct 2016 12:52:03 +0000 (13:52 +0100)]
drm/i915: Stop reporting error details in dmesg as well as the error-state
As we already capture all the information from the registers into the
error-state, also dumping that to dmesg just generates noise that upsets
CI and users alike (and doesn't provide us with any more information).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161019125203.28851-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Heiko Carstens [Wed, 19 Oct 2016 18:28:11 +0000 (19:28 +0100)]
sched/core, x86: Make struct thread_info arch specific again
The following commit:
c65eacbe290b ("sched/core: Allow putting thread_info into task_struct")
... made 'struct thread_info' a generic struct with only a
single ::flags member, if CONFIG_THREAD_INFO_IN_TASK_STRUCT=y is
selected.
This change however seems to be quite x86 centric, since at least the
generic preemption code (asm-generic/preempt.h) assumes that struct
thread_info also has a preempt_count member, which apparently was not
true for x86.
We could add a bit more #ifdefs to solve this problem too, but it seems
to be much simpler to make struct thread_info arch specific
again. This also makes the conversion to THREAD_INFO_IN_TASK_STRUCT a
bit easier for architectures that have a couple of arch specific stuff
in their thread_info definition.
The arch specific stuff _could_ be moved to thread_struct. However
keeping them in thread_info makes it easier: accessing thread_info
members is simple, since it is at the beginning of the task_struct,
while the thread_struct is at the end. At least on s390 the offsets
needed to access members of the thread_struct (with task_struct as
base) are too large for various asm instructions. This is not a
problem when keeping these members within thread_info.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: keescook@chromium.org
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/1476901693-8492-2-git-send-email-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dmitry Safonov [Wed, 19 Oct 2016 21:53:08 +0000 (00:53 +0300)]
x86/signal: Remove bogus user_64bit_mode() check from sigaction_compat_abi()
The recent introduction of SA_X32/IA32 sa_flags added a check for
user_64bit_mode() into sigaction_compat_abi(). user_64bit_mode() is true
for native 64-bit processes and x32 processes.
Due to that the function returns w/o setting the SA_X32_ABI flag for X32
processes. In consequence the kernel attempts to deliver the signal to the
X32 process in native 64-bit mode causing the process to segfault.
Remove the check, so the actual check for X32 mode which sets the ABI flag
can be reached. There is no side effect for native 64-bit mode.
[ tglx: Rewrote changelog ]
Fixes:
6846351052e6 ("x86/signal: Add SA_{X32,IA32}_ABI sa_flags")
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: linux-mm@kvack.org
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Link: http://lkml.kernel.org/r/CAJwJo6Z8ZWPqNfT6t-i8GW1MKxQrKDUagQqnZ%2B0%2B697%3DMyVeGg@mail.gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ard Biesheuvel [Thu, 20 Oct 2016 10:12:57 +0000 (11:12 +0100)]
arm64: kernel: force ET_DYN ELF type for CONFIG_RELOCATABLE=y
GNU ld used to set the ELF file type to ET_DYN for PIE executables, which
is the same file type used for shared libraries. However, this was changed
recently, and now PIE executables are emitted as ET_EXEC instead.
The distinction is only relevant for ELF loaders, and so there is little
reason to care about the difference when building the kernel, which is
why the change has gone unnoticed until now.
However, debuggers do use the ELF binary, and expect ET_EXEC type files
to appear in memory at the exact offset described in the ELF metadata.
This means source level debugging is no longer possible when KASLR is in
effect or when executing the stub.
So add the -shared LD option when building with CONFIG_RELOCATABLE=y. This
forces the ELF file type to be set to ET_DYN (which is what you get when
building with binutils 2.24 and earlier anyway), and has no other ill
effects.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>