OSDN Git Service
Linus Torvalds [Mon, 10 Aug 2009 18:21:13 +0000 (11:21 -0700)]
Merge branch 'irq-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86/irq: Fix move_irq_desc() for nodes without ram
Linus Torvalds [Mon, 10 Aug 2009 18:11:40 +0000 (11:11 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Fix serialization in pit_expect_msb()
Linus Torvalds [Mon, 10 Aug 2009 18:00:37 +0000 (11:00 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI hotplug: SGI hotplug: do not use hotplug_slot_attr
PCI hotplug: SGI hotplug: fix build failure
Linus Torvalds [Fri, 31 Jul 2009 19:45:41 +0000 (12:45 -0700)]
x86: Fix serialization in pit_expect_msb()
Wei Chong Tan reported a fast-PIT-calibration corner-case:
| pit_expect_msb() is vulnerable to SMI disturbance corner case
| in some platforms which causes /proc/cpuinfo to show wrong
| CPU MHz value when quick_pit_calibrate() jumps to success
| section.
I think that the real issue isn't even an SMI - but the fact
that in the very last iteration of the loop, there's no
serializing instruction _after_ the last 'rdtsc'. So even in
the absense of SMI's, we do have a situation where the cycle
counter was read without proper serialization.
The last check should be done outside the outer loop, since
_inside_ the outer loop, we'll be testing that the PIT has
the right MSB value has the right value in the next iteration.
So only the _last_ iteration is special, because that's the one
that will not check the PIT MSB value any more, and because the
final 'get_cycles()' isn't serialized.
In other words:
- I'd like to move the PIT MSB check to after the last
iteration, rather than in every iteration
- I think we should comment on the fact that it's also a
serializing instruction and so 'fences in' the TSC read.
Here's a suggested replacement.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: "Tan, Wei Chong" <wei.chong.tan@intel.com>
Tested-by: "Tan, Wei Chong" <wei.chong.tan@intel.com>
LKML-Reference: <
B28277FD4E0F9247A3D55704C440A140D5D683F3@pgsmsx504.gar.corp.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Linus Torvalds [Mon, 10 Aug 2009 16:00:47 +0000 (09:00 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
mm_for_maps: take ->cred_guard_mutex to fix the race with exec
mm_for_maps: shift down_read(mmap_sem) to the caller
mm_for_maps: simplify, use ptrace_may_access()
Linus Torvalds [Mon, 10 Aug 2009 15:59:56 +0000 (08:59 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/dma: pci_set_dma_mask() shouldn't fail if mask fits in RAM
Jaswinder Singh Rajput [Mon, 10 Aug 2009 15:45:42 +0000 (16:45 +0100)]
MN10300: includecheck fix: mn10300, pci.h
Fix the following 'make includecheck' warning:
arch/mn10300/include/asm/pci.h: linux/mm.h is included more than once.
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Figo.zhang [Sat, 8 Aug 2009 13:01:22 +0000 (21:01 +0800)]
mempool.c: clean up type-casting
clean up type-casting twice. "size_t" is typedef as "unsigned long" in
64-bit system, and "unsigned int" in 32-bit system, and the intermediate
cast to 'long' is pointless.
Signed-off-by: Figo.zhang <figo1802@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ryusuke Konishi [Sat, 8 Aug 2009 08:52:50 +0000 (17:52 +0900)]
documentation: register ioctl entry of nilfs2
This will register the ioctl range used by nilfs2 file system to the
table listed in Documentation/ioctl/ioctl-number.txt.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Fri, 10 Jul 2009 01:27:40 +0000 (03:27 +0200)]
mm_for_maps: take ->cred_guard_mutex to fix the race with exec
The problem is minor, but without ->cred_guard_mutex held we can race
with exec() and get the new ->mm but check old creds.
Now we do not need to re-check task->mm after ptrace_may_access(), it
can't be changed to the new mm under us.
Strictly speaking, this also fixes another very minor problem. Unless
security check fails or the task exits mm_for_maps() should never
return NULL, the caller should get either old or new ->mm.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Oleg Nesterov [Fri, 10 Jul 2009 01:27:38 +0000 (03:27 +0200)]
mm_for_maps: shift down_read(mmap_sem) to the caller
mm_for_maps() takes ->mmap_sem after security checks, this looks
strange and obfuscates the locking rules. Move this lock to its
single caller, m_start().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Oleg Nesterov [Tue, 23 Jun 2009 19:25:32 +0000 (21:25 +0200)]
mm_for_maps: simplify, use ptrace_may_access()
It would be nice to kill __ptrace_may_access(). It requires task_lock(),
but this lock is only needed to read mm->flags in the middle.
Convert mm_for_maps() to use ptrace_may_access(), this also simplifies
the code a little bit.
Also, we do not need to take ->mmap_sem in advance. In fact I think
mm_for_maps() should not play with ->mmap_sem at all, the caller should
take this lock.
With or without this patch, without ->cred_guard_mutex held we can race
with exec() and get the new ->mm but check old creds.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Benjamin Herrenschmidt [Mon, 10 Aug 2009 06:36:38 +0000 (16:36 +1000)]
powerpc/dma: pci_set_dma_mask() shouldn't fail if mask fits in RAM
On an iMac G5, the b43 driver is failing to initialise because trying to
set the dma mask to 30-bit fails. Even though there's only 512MiB of RAM
in the machine anyway:
https://bugzilla.redhat.com/show_bug.cgi?id=514787
We should probably let it succeed if the available RAM in the system
doesn't exceed the requested limit.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Linus Torvalds [Sun, 9 Aug 2009 21:58:34 +0000 (14:58 -0700)]
Merge branch 'for-linus' of git://git.infradead.org/ubi-2.6
* 'for-linus' of git://git.infradead.org/ubi-2.6:
UBI: compatible fallback in absense of sequence numbers
UBI: fix double free on error path
Linus Torvalds [Sun, 9 Aug 2009 21:58:21 +0000 (14:58 -0700)]
Merge branch 'kvm-updates/2.6.31' of git://git./virt/kvm/kvm
* 'kvm-updates/2.6.31' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Avoid redelivery of edge interrupt before next edge
KVM: MMU: limit rmap chain length
KVM: ia64: fix build failures due to ia64/unsigned long mismatches
KVM: Make KVM_HPAGES_PER_HPAGE unsigned long to avoid build error on powerpc
KVM: fix ack not being delivered when msi present
KVM: s390: fix wait_queue handling
KVM: VMX: Fix locking imbalance on emulation failure
KVM: VMX: Fix locking order in handle_invalid_guest_state
KVM: MMU: handle n_free_mmu_pages > n_alloc_mmu_pages in kvm_mmu_change_mmu_pages
KVM: SVM: force new asid on vcpu migration
KVM: x86: verify MTRR/PAT validity
KVM: PIT: fix kpit_elapsed division by zero
KVM: Fix KVM_GET_MSR_INDEX_LIST
Linus Torvalds [Sun, 9 Aug 2009 21:58:09 +0000 (14:58 -0700)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/i915: silence vblank warnings
drm: silence pointless vblank warning.
drm: When adding probed modes, preserve duplicate mode types
Linus Torvalds [Sun, 9 Aug 2009 21:57:41 +0000 (14:57 -0700)]
Merge branch 'timers-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
posix_cpu_timers_exit_group(): Do not use thread_group_cputimer()
Linus Torvalds [Sun, 9 Aug 2009 21:57:26 +0000 (14:57 -0700)]
Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf_counter: Fix/complete ftrace event records sampling
perf_counter, ftrace: Fix perf_counter integration
tracing/filters: Always free pred on filter_add_subsystem_pred() failure
tracing/filters: Don't use pred on alloc failure
ring-buffer: Fix memleak in ring_buffer_free()
tracing: Fix recordmcount.pl to handle sections with only weak functions
ring-buffer: Fix advance of reader in rb_buffer_peek()
tracing: do not use functions starting with .L in recordmcount.pl
ring-buffer: do not disable ring buffer on oops_in_progress
ring-buffer: fix check of try_to_discard result
Linus Torvalds [Sun, 9 Aug 2009 21:57:09 +0000 (14:57 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: fix buffer overflow in efi_init()
x86: Add quirk to make Apple MacBookPro5,1 use reboot=pci
x86: Fix MSI-X initialization by using online_mask for x2apic target_cpus
x86: Fix VMI && stack protector
Linus Torvalds [Sun, 9 Aug 2009 21:56:51 +0000 (14:56 -0700)]
Merge branch 'core-fixes-for-linus-2' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
lockdep: Fix typos in documentation
lockdep: Fix file mode of lock_stat
rtmutex: Avoid deadlock in rt_mutex_start_proxy_lock()
Frederic Weisbecker [Thu, 6 Aug 2009 23:25:54 +0000 (01:25 +0200)]
perf_counter: Fix/complete ftrace event records sampling
This patch implements the kernel side support for ftrace event
record sampling.
A new counter sampling attribute is added:
PERF_SAMPLE_TP_RECORD
which requests ftrace events record sampling. In this case
if a PERF_TYPE_TRACEPOINT counter is active and a tracepoint
fires, we emit the tracepoint binary record to the
perfcounter event buffer, as a sample.
Result, after setting PERF_SAMPLE_TP_RECORD attribute from perf
record:
perf record -f -F 1 -a -e workqueue:workqueue_execution
perf report -D
0x21e18 [0x48]: event: 9
.
. ... raw event: size 72 bytes
. 0000: 09 00 00 00 01 00 48 00 d0 c7 00 81 ff ff ff ff ......H........
. 0010: 0a 00 00 00 0a 00 00 00 21 00 00 00 00 00 00 00 ........!......
. 0020: 2b 00 01 02 0a 00 00 00 0a 00 00 00 65 76 65 6e +...........eve
. 0030: 74 73 2f 31 00 00 00 00 00 00 00 00 0a 00 00 00 ts/1...........
. 0040: e0 b1 31 81 ff ff ff ff .......
.
0x21e18 [0x48]: PERF_EVENT_SAMPLE (IP, 1): 10: 0xffffffff8100c7d0 period: 33
The raw ftrace binary record starts at offset 0020.
Translation:
struct trace_entry {
type = 0x2b = 43;
flags = 1;
preempt_count = 2;
pid = 0xa = 10;
tgid = 0xa = 10;
}
thread_comm = "events/1"
thread_pid = 0xa = 10;
func = 0xffffffff8131b1e0 = flush_to_ldisc()
What will come next?
- Userspace support ('perf trace'), 'flight data recorder' mode
for perf trace, etc.
- The unconditional copy from the profiling callback brings
some costs however if someone wants no such sampling to
occur, and needs to be fixed in the future. For that we need
to have an instant access to the perf counter attribute.
This is a matter of a flag to add in the struct ftrace_event.
- Take care of the events recursivity! Don't ever try to record
a lock event for example, it seems some locking is used in
the profiling fast path and lead to a tracing recursivity.
That will be fixed using raw spinlock or recursivity
protection.
- [...]
- Profit! :-)
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Tue, 21 Jul 2009 15:34:57 +0000 (17:34 +0200)]
perf_counter, ftrace: Fix perf_counter integration
Adds possible second part to the assign argument of TP_EVENT().
TP_perf_assign(
__perf_count(foo);
__perf_addr(bar);
)
Which, when specified make the swcounter increment with @foo instead
of the usual 1, and report @bar for PERF_SAMPLE_ADDR (data address
associated with the event) when this triggers a counter overflow.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Sun, 9 Aug 2009 10:46:45 +0000 (12:46 +0200)]
Merge branch 'linus' into tracing/urgent
Merge reason: Merge up to almost-rc6 to pick up latest perfcounters
(on which we'll queue up a dependent fix)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Gleb Natapov [Sun, 5 Jul 2009 15:48:11 +0000 (18:48 +0300)]
KVM: Avoid redelivery of edge interrupt before next edge
The check for an edge is broken in current ioapic code. ioapic->irr is
cleared on each edge interrupt by ioapic_service() and this makes
old_irr != ioapic->irr condition in kvm_ioapic_set_irq() to be always
true. The patch fixes the code to properly recognise edge.
Some HW emulation calls set_irq() without level change. If each such
call is propagated to an OS it may confuse a device driver. This is the
case with keyboard device emulation and Windows XP x64 installer on SMP VM.
Each keystroke produce two interrupts (down/up) one interrupt is
submitted to CPU0 and another to CPU1. This confuses Windows somehow
and it ignores keystrokes.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Roel Kluin [Thu, 6 Aug 2009 22:58:13 +0000 (15:58 -0700)]
x86: fix buffer overflow in efi_init()
If the vendor name (from c16) can be longer than 100 bytes (or missing a
terminating null), then the null is written past the end of vendor[].
Found with Parfait, http://research.sun.com/projects/parfait/
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Huang Ying <ying.huang@intel.com>
Frans Pop [Sun, 9 Aug 2009 02:25:29 +0000 (12:25 +1000)]
drm/i915: silence vblank warnings
these errors are pretty pointless
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Paul Rolland [Sun, 9 Aug 2009 02:24:01 +0000 (12:24 +1000)]
drm: silence pointless vblank warning.
Some applications/hardware combinations are triggering the message "failed to
acquire vblank counter" to be issued up to 20 times a second, which makes it
both useless and dangerous, as this may hide other important messages.
This changes makes it only appear when people are debugging.
Signed-off-by: Paul Rolland <rol@as2917.net>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Lost-twice-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Keith Packard [Mon, 20 Jul 2009 21:49:17 +0000 (14:49 -0700)]
drm: When adding probed modes, preserve duplicate mode types
The code which takes probed modes and adds them to a connector eliminates
duplicate modes by comparing them using drm_mode_equal. That function
doesn't consider the type bits, which means that any modes which differ only
in the type field will be lost.
One of the bits in the mode->type field is the DRM_MODE_TYPE_PREFERRED bit.
If the mode with that bit is lost, then higher level code will not know
which mode to select, causing a random mode to be used instead.
This patch simply merges the two mode type bits together; that seems
reasonable to me, but perhaps only a subset of the bits should be used? None
of these can be user defined as they all come from looking at just the
hardware.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Stanislaw Gruszka [Thu, 6 Aug 2009 23:03:30 +0000 (16:03 -0700)]
posix_cpu_timers_exit_group(): Do not use thread_group_cputimer()
When the process exits we don't have to run new cputimer nor
use running one (as it not accounts when tsk->exit_state != 0)
to get process CPU times. As there is only one thread we can
just use CPU times fields from task and signal structs.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Roland McGrath <roland@redhat.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Tom Zanussi [Sat, 8 Aug 2009 15:49:53 +0000 (10:49 -0500)]
tracing/filters: Always free pred on filter_add_subsystem_pred() failure
If filter_add_subsystem_pred() fails due to ENOSPC or ENOMEM,
the pred doesn't get freed, while as a side effect it does for
other errors. Make it so the caller always frees the pred for
any error.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <
1249746593.6453.32.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Tom Zanussi [Sat, 8 Aug 2009 15:49:09 +0000 (10:49 -0500)]
tracing/filters: Don't use pred on alloc failure
Dan Carpenter sent me a fix to prevent pred from being used if
it couldn't be allocated. I noticed the same problem also
existed for the create_pred() case and added a fix for that.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <
1249746549.6453.29.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ozan Çağlayan [Tue, 4 Aug 2009 16:39:31 +0000 (19:39 +0300)]
x86: Add quirk to make Apple MacBookPro5,1 use reboot=pci
MacBookPro5,1 is not able to reboot unless reboot=pci is set.
This patch forces it through a DMI quirk specific to this
device.
Signed-off-by: Ozan Çağlayan <ozan@pardus.org.tr>
LKML-Reference: <
1249403971-6543-1-git-send-email-ozan@pardus.org.tr>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Yinghai Lu [Tue, 4 Aug 2009 16:01:33 +0000 (09:01 -0700)]
x86/irq: Fix move_irq_desc() for nodes without ram
Don't move it if target node is -1.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <
4A785B5D.
4070702@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Yinghai Lu [Tue, 4 Aug 2009 15:59:59 +0000 (08:59 -0700)]
x86: Fix MSI-X initialization by using online_mask for x2apic target_cpus
found a system where x2apic reports an MSI-X irq initialization
failure:
[ 302.859446] igbvf 0000:81:10.4: enabling device (0000 -> 0002)
[ 302.874369] igbvf 0000:81:10.4: using 64bit DMA mask
[ 302.879023] igbvf 0000:81:10.4: using 64bit consistent DMA mask
[ 302.894386] igbvf 0000:81:10.4: enabling bus mastering
[ 302.898171] igbvf 0000:81:10.4: setting latency timer to 64
[ 302.914050] reserve_memtype added 0xefb08000-0xefb0c000, track uncached-minus, req uncached-minus, ret uncached-minus
[ 302.933839] reserve_memtype added 0xefb28000-0xefb29000, track uncached-minus, req uncached-minus, ret uncached-minus
[ 302.940367] alloc irq_desc for 265 on node 4
[ 302.956874] alloc kstat_irqs on node 4
[ 302.959452] alloc irq_2_iommu on node 0
[ 302.974328] igbvf 0000:81:10.4: irq 265 for MSI/MSI-X
[ 302.977778] alloc irq_desc for 266 on node 4
[ 302.980347] alloc kstat_irqs on node 4
[ 302.995312] free_memtype request 0xefb28000-0xefb29000
[ 302.998816] igbvf 0000:81:10.4: Failed to initialize MSI-X interrupts.
... it turns out that when trying to enable MSI-X,
__assign_irq_vector(new, cfg_new, apic->target_cpus()) can not
get vector because for x2apic target-cpus returns cpumask_of(0)
Update that to online_mask like xapic.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <
4A785AFF.
3050902@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Linus Torvalds [Sat, 8 Aug 2009 02:06:36 +0000 (19:06 -0700)]
Merge git://git./linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
USB: fix oops on disconnect in cdc-acm
USB: storage: include Prolific Technology USB drive in unusual_devs list
USB: ftdi_sio: add product_id for Marvell OpenRD Base, Client
USB: ftdi_sio: add vendor and product id for Bayer glucose meter serial converter cable
USB: EHCI: fix counting of transaction error retries
USB: EHCI: fix two new bugs related to Clear-TT-Buffer
USB: usbfs: fix -ENOENT error code to be -ENODEV
USB: musb: fix the nop registration for OMAP3EVM
USB: devio: Properly do access_ok() checks
USB: pl2303: New vendor and product id
Linus Torvalds [Sat, 8 Aug 2009 02:06:13 +0000 (19:06 -0700)]
Merge git://git./linux/kernel/git/gregkh/staging-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
Staging: rspiusb: Fix buffer overflow
staging: add dependencies on PCI for drivers that require it
Staging: rtl8192su: fix build error
Staging: rt2870: Revert d44ca7 Removal of kernel_thread() API
Staging: rt2870: Add USB ID for Linksys, Planex Communications, Belkin
Linus Torvalds [Sat, 8 Aug 2009 02:03:59 +0000 (19:03 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/anholt/drm-intel
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (22 commits)
drm/i915: Fix read outside array bounds in restoring the SWF10 range.
drm/i915: Use our own workqueue to avoid wedging the system along with the GPU.
drm/i915: Add support for dual-channel LVDS on 8xx.
drm/i915: Return disconnected for SDVO DVI when there's no digital EDID.
drm/i915: Choose real sdvo output according to result from detection
drm/i915: Set preferred mode for integrated TV according to TV format
drm/i915: fix 845G FIFO size & burst length
drm/i915: fix VGA detect on IGDNG
drm/i915: Add eDP support on IGDNG mobile chip
drm/i915: enable DisplayPort support on IGDNG
drm/i915: Fix channel ending action for DP aux transaction
drm/i915: fix issue in display pipe setup on IGDNG
drm/i915: disable VGA plane reliably
drm/I915: Fix offset to DVO timings in LVDS data
drm/i915: hdmi detection according by reading edid
drm/i915: correct self-refresh calculation in "everything off" case
drm/i915: handle FIFO oversubsription correctly
drm/i915: FIFO watermark calculation fixes
drm/i915: ignore lvds on AOpen Mini PC MP-915
drm/i915: Allow frame buffers up to 4096x4096 on 915/945 class hardware
...
Linus Torvalds [Sat, 8 Aug 2009 02:03:09 +0000 (19:03 -0700)]
Merge git://git./linux/kernel/git/mason/btrfs-unstable
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: fix balancing oops when invalidate_inode_pages2 returns EBUSY
Btrfs: correct error-handling zlib error handling
Btrfs: remove superfluous NULL pointer check in btrfs_rename()
Btrfs: make sure the async caching thread advances the key
Btrfs: fix btrfs_remove_from_free_space corner case
Linus Torvalds [Sat, 8 Aug 2009 01:53:44 +0000 (18:53 -0700)]
Merge git://git./linux/kernel/git/hch/xfs-icache-races
* git://git.kernel.org/pub/scm/linux/kernel/git/hch/xfs-icache-races:
xfs: fix freeing of inodes not yet added to the inode cache
vfs: add __destroy_inode
vfs: fix inode_init_always calling convention
Roel Kluin [Fri, 7 Aug 2009 19:00:10 +0000 (21:00 +0200)]
Staging: rspiusb: Fix buffer overflow
usb_buffer_map_sg() may return -1. This will result in a read from
pdx->PixelUrb[frameInfo][-1]
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jeff Mahoney [Fri, 7 Aug 2009 23:12:03 +0000 (16:12 -0700)]
staging: add dependencies on PCI for drivers that require it
This patch adds PCI dependencies to staging drivers that require it.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 4 Aug 2009 23:53:36 +0000 (16:53 -0700)]
Staging: rtl8192su: fix build error
This fixes a build error when selecting the rtl8192su driver as a
module. This has been reported by me, and the opensuse kernel developer
team, and I finally tracked it down.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike Galbraith [Fri, 31 Jul 2009 05:14:04 +0000 (07:14 +0200)]
Staging: rt2870: Revert d44ca7 Removal of kernel_thread() API
Staging: rt2870: Revert d44ca7 Removal of kernel_thread() API
The sanity check this patch introduced triggers on shutdown, apparently due to
threads having already exited by the time BUG_ON() is reached.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Teoh <htmldeveloper@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jakob Gruber [Thu, 30 Jul 2009 18:37:36 +0000 (20:37 +0200)]
Staging: rt2870: Add USB ID for Linksys, Planex Communications, Belkin
Linksys WUSB100, Belkin
F5D8053 N, Planex Communications unknown model.
Signed-off-by: Jakob Gruber <jakob.gruber@kabelnet.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Tue, 4 Aug 2009 21:52:09 +0000 (23:52 +0200)]
USB: fix oops on disconnect in cdc-acm
This patch fixes an oops caused when during an unplug a device's table
of endpoints is zeroed before the driver is notified. A pointer to
the endpoint must be cached.
this fixes a regression caused by commit
5186ffee2320942c3dc9745f7930e0eb15329ca6
Therefore it should go into 2.6.31
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rogerio Brito [Thu, 6 Aug 2009 22:20:19 +0000 (15:20 -0700)]
USB: storage: include Prolific Technology USB drive in unusual_devs list
Add a quirk entry for the Leading Driver UD-11 usb flash drive.
As Alan Stern told me, the device doesn't deal correctly with the
locking media feature of the device, and this patch incorporates it.
Compiled, tested, working.
Signed-off-by: Rogerio Brito <rbrito@ime.usp.br>
Cc: Phil Dibowitz <phil@ipom.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Robert Hancock <hancockrwd@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dhaval Vasa [Fri, 7 Aug 2009 11:56:49 +0000 (17:26 +0530)]
USB: ftdi_sio: add product_id for Marvell OpenRD Base, Client
reference:
http://www.open-rd.org
Signed-off-by: Dhaval Vasa <dhaval.vasa@einfochips.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Marko Hänninen [Fri, 31 Jul 2009 19:32:39 +0000 (22:32 +0300)]
USB: ftdi_sio: add vendor and product id for Bayer glucose meter serial converter cable
Attached patch adds USB vendor and product IDs for Bayer's USB to serial
converter cable used by Bayer blood glucose meters. It seems to be a
FT232RL based device and works without any problem with ftdi_sio driver
when this patch is applied. See: http://winglucofacts.com/cables/
Signed-off-by: Marko Hänninen <bugitus@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Fri, 31 Jul 2009 14:41:40 +0000 (10:41 -0400)]
USB: EHCI: fix counting of transaction error retries
This patch (as1274) simplifies the counting of transaction-error
retries. Now we will count up from 0 to QH_XACTERR_MAX instead of
down from QH_XACTERR_MAX to 0.
The patch also fixes a small bug: qh->xacterr was not getting
initialized for interrupt endpoints.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Fri, 31 Jul 2009 14:40:22 +0000 (10:40 -0400)]
USB: EHCI: fix two new bugs related to Clear-TT-Buffer
This patch (as1273) fixes two(!) bugs introduced by the new
Clear-TT-Buffer implementation in ehci-hcd.
It is now possible for an idle QH to have some URBs on its
queue -- this will happen if a Clear-TT-Buffer is pending for
the QH's endpoint. Consequently we should not issue a warning
when someone tries to unlink an URB from an idle QH; instead
we should process the request immediately.
The refcounts for QHs could get messed up, because
submit_async() would increment the refcount when calling
qh_link_async() and qh_link_async() would then refuse to link
the QH into the schedule if a Clear-TT-Buffer was pending.
Instead we should increment the refcount only when the QH
actually is added to the schedule. The current code tries to
be clever by leaving the refcount alone if an unlink is
immediately followed by a relink; the patch changes this to an
unconditional decrement and increment (although they occur in
the opposite order).
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: David Brownell <david-b@pacbell.net>
Tested-by: Manuel Lauss <manuel.lauss@gmail.com>
Tested-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Thu, 30 Jul 2009 19:28:14 +0000 (15:28 -0400)]
USB: usbfs: fix -ENOENT error code to be -ENODEV
This patch (as1272) changes the error code returned when an open call
for a USB device node fails to locate the corresponding device. The
appropriate error code is -ENODEV, not -ENOENT.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Kay Sievers <kay.sievers@vrfy.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Gupta, Ajay Kumar [Wed, 29 Jul 2009 06:28:57 +0000 (11:58 +0530)]
USB: musb: fix the nop registration for OMAP3EVM
OMAP3EVM uses ISP1504 phy which doesn't require any programming and
thus has to use NOP otg transceiver.
Cleanups being done:
- Remove unwanted code in usb-musb.c file
- Register NOP in OMAP3EVM board file using
usb_nop_xceiv_register().
- Select NOP_USB_XCEIV for OMAP3EVM boards.
- Don't enable TWL4030_USB in omap3_evm_defconfig
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Eino-Ville Talvala <talvala@stanford.edu>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michael Buesch [Wed, 29 Jul 2009 09:39:03 +0000 (11:39 +0200)]
USB: devio: Properly do access_ok() checks
access_ok() checks must be done on every part of the userspace structure
that is accessed. If access_ok() on one part of the struct succeeded, it
does not imply it will succeed on other parts of the struct. (Does
depend on the architecture implementation of access_ok()).
This changes the __get_user() users to first check access_ok() on the
data structure.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: stable <stable@kernel.org>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Khanh-Dang Nguyen Thu Lam [Tue, 28 Jul 2009 17:41:17 +0000 (19:41 +0200)]
USB: pl2303: New vendor and product id
I am submitting a patch for the pl2303 driver. This patch adds support
for the "Sony QN-3USB" cable (vendor=0x054c, product=0x0437). This USB
cable is a so-called data cable used to connect a Sony mobile phone to a
computer. Supported models are Sony CMD-J5, J6, J7, J16, J26, J70 and
Z7.
I have used this patch with my Sony CMD-J70 for several days and I
haven't encountered any kernel/hardware issue.
From: Khanh-Dang Nguyen Thu Lam <kdntl@yahoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Yan Zheng [Fri, 7 Aug 2009 17:51:33 +0000 (13:51 -0400)]
Btrfs: fix balancing oops when invalidate_inode_pages2 returns EBUSY
invalidate_inode_pages2_range may return -EBUSY occasionally
which results Oops. This patch fixes the issue by moving
invalidate_inode_pages2_range into a loop and keeping calling
it until the return value is not -EBUSY.
The EBUSY return is temporary, and can happen when the btrfs release page
function is unable to release a page because the EXTENT_LOCK
bit is set.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Julia Lawall [Fri, 7 Aug 2009 17:51:33 +0000 (13:51 -0400)]
Btrfs: correct error-handling zlib error handling
find_zlib_workspace returns an ERR_PTR value in an error case instead of NULL.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@match exists@
expression x, E;
statement S1, S2;
@@
x = find_zlib_workspace(...)
... when != x = E
(
* if (x == NULL || ...) S1 else S2
|
* if (x == NULL && ...) S1 else S2
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Bartlomiej Zolnierkiewicz [Fri, 7 Aug 2009 17:47:08 +0000 (13:47 -0400)]
Btrfs: remove superfluous NULL pointer check in btrfs_rename()
This takes care of the following entry from Dan's list:
fs/btrfs/inode.c +4788 btrfs_rename(36) warning: variable derefenced before check 'old_inode'
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Eugene Teo <eteo@redhat.com>
Cc: Julia Lawall <julia@diku.dk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Linus Torvalds [Fri, 7 Aug 2009 17:46:51 +0000 (10:46 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits)
ARM: 5639/1: arm: clkdev.c should include <linux/clk.h>
ARM: 5638/1: arch/arm/kernel/signal.c: use correct address space for CRUNCH
ARM: 5637/1: [KS8695] Don't reference CLOCK_TICK_RATE in drivers
ARM: S3C64XX: serial: Fix section mismatch warning
ARM: S3C24XX: serial: Fix section mismatch warnings
ARM: S3C: PWM fix for low duty cycle
ARM: 5597/1: [PCI] reset all internal hardware prior PCI initialization
ARM: 5627/1: Fix restoring of lr at the end of mcount
ARM: 5624/1: Document cache aliasing region
S3C64XX: Fix ARMCLK configuration
S3C64XX: Fix get_rate() for ARMCLK
S3C24XX: GPIO: Fix pin range check in s3c_gpiolib_getchip
mx3 defconfig update
mx27 defconfig update
ARM: 5623/1: Treo680: ir shutdown typo fix
ARM: includecheck fix: plat-stmp3xxx/pinmux.c
ARM: includecheck fix: plat-s3c64xx/pm.c
ARM: includecheck fix: mach-omap2/mcbsp.c
ARM: includecheck fix: mach-omap1/mcbsp.c
ARM: includecheck fix: board-sffsdr.c
...
Linus Torvalds [Fri, 7 Aug 2009 17:46:27 +0000 (10:46 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
net: Fix spinlock use in alloc_netdev_mq()
Linus Torvalds [Fri, 7 Aug 2009 17:46:09 +0000 (10:46 -0700)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
[S390] KVM: Read buffer overflow
[S390] kernel: Storing machine flags early in lowcore
Linus Torvalds [Fri, 7 Aug 2009 17:44:11 +0000 (10:44 -0700)]
Merge git://git.infradead.org/~dwmw2/iommu-2.6.31
* git://git.infradead.org/~dwmw2/iommu-2.6.31:
intel-iommu: Fix enabling snooping feature by mistake
intel-iommu: Mask physical address to correct page size in intel_map_single()
intel-iommu: Correct sglist size calculation.
Linus Torvalds [Fri, 7 Aug 2009 17:43:07 +0000 (10:43 -0700)]
Merge branch 'perfcounters-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf_counter: Fix double list iteration in per task precise stats
perf: Auto-detect libelf
perf symbol: Fix symbol parsing in certain cases: use the build-id as a symlink
perf_counter/powerpc: Check oprofile_cpu_type for NULL before using it
ftrace: Fix perf-tracepoint OOPS
perf report: Add missing command line options to man page
perf: Auto-detect libbfd
perf report: Make --sort comm,dso,symbol the default
Linus Torvalds [Fri, 7 Aug 2009 17:42:31 +0000 (10:42 -0700)]
Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
jffs2: Fix return value from jffs2_do_readpage_nolock()
mtd: mtdblock: introduce mtdblks_lock
mtd: remove 'SBC8240 Wind River' Device Driver Code
mtd: OneNAND: OMAP2/3: free GPMC CS on module removal
mtd: OneNAND: fix incorrect bufferram offset
mtd: blkdevs: do not forget to get MTD devices
mtd: fix the conversion from dev to mtd_info
mtd: let include/linux/mtd/partitions.h stand on its own
Linus Torvalds [Fri, 7 Aug 2009 17:42:14 +0000 (10:42 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: matrix_keypad - make matrix keymap size dynamic
Input: wistron_btns - support Prestigio Wifi RF kill button
Input: i8042 - add Asus G1S to noloop exception list
Linus Torvalds [Fri, 7 Aug 2009 17:41:36 +0000 (10:41 -0700)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon/kms: setup MC/VRAM the same way for suspend/resume
drm/radeon/kms: Fix caching mode selection for GTT object
Linus Torvalds [Thu, 6 Aug 2009 22:09:34 +0000 (15:09 -0700)]
flat: fix uninitialized ptr with shared libs
The new credentials code broke load_flat_shared_library() as it now uses
an uninitialized cred pointer.
Reported-by: Bernd Schmidt <bernds_cb1@t-online.de>
Tested-by: Bernd Schmidt <bernds_cb1@t-online.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: David Howells <dhowells@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Albin Tonnerre [Thu, 6 Aug 2009 22:09:32 +0000 (15:09 -0700)]
lib/decompress_*: only include <linux/slab.h> if STATIC is not defined
These includes were added by
079effb6933f34b9b1b67b08bd4fd7fb672d16ef
("kmemtrace, kbuild: fix slab.h dependency problem in
lib/decompress_inflate.c") to fix the build when using kmemtrace. However
this is not necessary when used to create a compressed kernel, and
actually creates issues (brings a lot of things unavailable in the
decompression environment), so don't include it if STATIC is defined.
Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Phillip Lougher [Thu, 6 Aug 2009 22:09:31 +0000 (15:09 -0700)]
bzip2/lzma: remove nasty uncompressed size hack in pre-boot environment
decompress_bunzip2 and decompress_unlzma have a nasty hack that subtracts
4 from the input length if being called in the pre-boot environment.
This is a nasty hack because it relies on the fact that flush = NULL only
when called from the pre-boot environment (i.e.
arch/x86/boot/compressed/misc.c). initramfs.c/do_mounts_rd.c pass in a
flush buffer (flush != NULL).
This hack prevents the decompressors from being used with flush = NULL by
other callers unless knowledge of the hack is propagated to them.
This patch removes the hack by making decompress (called only from the
pre-boot environment) a wrapper function that subtracts 4 from the input
length before calling the decompressor.
Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Phillip Lougher [Thu, 6 Aug 2009 22:09:30 +0000 (15:09 -0700)]
bzip2/lzma/gzip: fix comments describing decompressor API
Fix and improve comments in decompress/generic.h that describe the
decompressor API. Also remove an unused definition, and rename INBUF_LEN
in lib/decompress_inflate.c to conform to bzip2/lzma naming.
Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Dumazet [Thu, 6 Aug 2009 22:09:28 +0000 (15:09 -0700)]
execve: must clear current->clear_child_tid
While looking at Jens Rosenboom bug report
(http://lkml.org/lkml/2009/7/27/35) about strange sys_futex call done from
a dying "ps" program, we found following problem.
clone() syscall has special support for TID of created threads. This
support includes two features.
One (CLONE_CHILD_SETTID) is to set an integer into user memory with the
TID value.
One (CLONE_CHILD_CLEARTID) is to clear this same integer once the created
thread dies.
The integer location is a user provided pointer, provided at clone()
time.
kernel keeps this pointer value into current->clear_child_tid.
At execve() time, we should make sure kernel doesnt keep this user
provided pointer, as full user memory is replaced by a new one.
As glibc fork() actually uses clone() syscall with CLONE_CHILD_SETTID and
CLONE_CHILD_CLEARTID set, chances are high that we might corrupt user
memory in forked processes.
Following sequence could happen:
1) bash (or any program) starts a new process, by a fork() call that
glibc maps to a clone( ... CLONE_CHILD_SETTID | CLONE_CHILD_CLEARTID
...) syscall
2) When new process starts, its current->clear_child_tid is set to a
location that has a meaning only in bash (or initial program) context
(&THREAD_SELF->tid)
3) This new process does the execve() syscall to start a new program.
current->clear_child_tid is left unchanged (a non NULL value)
4) If this new program creates some threads, and initial thread exits,
kernel will attempt to clear the integer pointed by
current->clear_child_tid from mm_release() :
if (tsk->clear_child_tid
&& !(tsk->flags & PF_SIGNALED)
&& atomic_read(&mm->mm_users) > 1) {
u32 __user * tidptr = tsk->clear_child_tid;
tsk->clear_child_tid = NULL;
/*
* We don't check the error code - if userspace has
* not set up a proper pointer then tough luck.
*/
<< here >> put_user(0, tidptr);
sys_futex(tidptr, FUTEX_WAKE, 1, NULL, NULL, 0);
}
5) OR : if new program is not multi-threaded, but spied by /proc/pid
users (ps command for example), mm_users > 1, and the exiting program
could corrupt 4 bytes in a persistent memory area (shm or memory mapped
file)
If current->clear_child_tid points to a writeable portion of memory of the
new program, kernel happily and silently corrupts 4 bytes of memory, with
unexpected effects.
Fix is straightforward and should not break any sane program.
Reported-by: Jens Rosenboom <jens@mcbone.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sonny Rao <sonnyrao@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Julia Lawall [Thu, 6 Aug 2009 22:07:41 +0000 (15:07 -0700)]
drivers/mmc: correct error-handling code
sdhci_alloc_host returns an ERR_PTR value in an error case instead of NULL.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@match exists@
expression x, E;
statement S1, S2;
@@
x = sdhci_alloc_host(...)
... when != x = E
(
* if (x == NULL || ...) S1 else S2
|
* if (x == NULL && ...) S1 else S2
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Philip Langdale <philipl@overt.org>
Cc: Pierre Ossman <pierre@ossman.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guennadi Liakhovetski [Thu, 6 Aug 2009 22:07:40 +0000 (15:07 -0700)]
i.MX31: fix framebuffer locking regressions
Recent framebuffer locking patches first made affected systems unbootable,
then the dead-lock has been fixed but as of 2.6.31-rc4 the framebuffer on
mx3 machines doesn't work. Fix this.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OGAWA Hirofumi [Thu, 6 Aug 2009 22:07:39 +0000 (15:07 -0700)]
vfs: mnt_want_write_file(): fix special file handling
I suspect that mnt_want_write_file() may have wrong assumption. I think
mnt_want_write_file() is assuming it increments ->mnt_writers if
(file->f_mode & FMODE_WRITE). But, if it's special_file(), it is false?
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Acked-by: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Sandeen [Thu, 6 Aug 2009 22:07:37 +0000 (15:07 -0700)]
compat_ioctl: hook up compat handler for FIEMAP ioctl
The FIEMAP_IOC_FIEMAP mapping ioctl was missing a 32-bit compat handler,
which means that 32-bit suerspace on 64-bit kernels cannot use this ioctl
command.
The structure is nicely aligned, padded, and sized, so it is just this
simple.
Tested w/ 32-bit ioctl tester (from Josef) on a 64-bit kernel on ext4.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Mark Lord <lkml@rtr.ca>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Josef Bacik <josef@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Thu, 6 Aug 2009 22:07:36 +0000 (15:07 -0700)]
fbcon: don't use vc_resize() on initialization
Catalin and kmemleak spotted a leak of a VC screen buffer in
vc_allocate() due to the following chain of events:
vc_allocate()
visual_init(init=1)
vc->vc_sw->con_init(init=1)
fbcon_init()
vc_resize()
vc->screen_buf = kmalloc()
vc->screen_buf = kmalloc()
The common way for the VC drivers is to set the screen dimension
parameters manually in the init case and only call vc_resize() for
!init - which allocates a screen buffer according to the new
dimensions.
fbcon instead would do vc_resize() unconditionally and afterwards set
the dimensions manually (again) for !init - i.e. completely upside
down. The vc_resize() allocated buffer would then get lost by
vc_allocate() allocating a fresh one.
Use vc_resize() only for actual resizing to close the leak.
Set the dimensions manually only in initialization mode to remove the
redundant setting in resize mode.
The kmemleak trace from Catalin:
unreferenced object 0xde158000 (size 12288):
comm "Xorg", pid 1439, jiffies
4294961016
hex dump (first 32 bytes):
20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 . . . . . . . .
20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 . . . . . . . .
backtrace:
[<
c006f74b>] __save_stack_trace+0x17/0x1c
[<
c006f81d>] create_object+0xcd/0x188
[<
c01f5457>] kmemleak_alloc+0x1b/0x3c
[<
c006e303>] __kmalloc+0xdb/0xe8
[<
c012cc4b>] vc_do_resize+0x73/0x1e0
[<
c012cdf1>] vc_resize+0x15/0x18
[<
c011afc1>] fbcon_init+0x1f9/0x2b8
[<
c0129e87>] visual_init+0x9f/0xdc
[<
c012aff3>] vc_allocate+0x7f/0xfc
[<
c012b087>] con_open+0x17/0x80
[<
c0120e43>] tty_open+0x1f7/0x2e4
[<
c0072fa1>] chrdev_open+0x101/0x118
[<
c006ffad>] __dentry_open+0x105/0x1cc
[<
c00700fd>] nameidata_to_filp+0x2d/0x38
[<
c00788cd>] do_filp_open+0x2c1/0x54c
[<
c006fdff>] do_sys_open+0x3b/0xb4
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Tested-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Florian Tobias Schandinat [Thu, 6 Aug 2009 22:07:34 +0000 (15:07 -0700)]
viafb: fix rmmod bug
This fixes a bug caused by changing pointers (viafb_mode, viafb_mode1)
assigned by module_param. It reduces driver complexity by not needlessly
changing these vars as they are only read once and removing now
superfluous code.
On unpatched kernels loading viafb with viafb_mode or viafb_mode1 option
used and afterwards unloading it results in:
kernel BUG at mm/slub.c:2926!
invalid opcode: 0000 [#1] PREEMPT
last sysfs file: /sys/devices/virtual/block/loop0/removable
Modules linked in: snd_hda_codec_realtek snd_hda_intel snd_hda_codec
snd_hwdep snd_pcm rtl8187 snd_timer eeprom_93cx6 mmc_block snd soundcore
via_sdmmc fb snd_page_alloc i2c_algo_bit i2c_viapro ehci_hcd uhci_hcd
cfbcopyarea mmc_core cfbimgblt cfbfillrect video output [last unloaded:
viafb]
Pid: 3355, comm: rmmod Not tainted (2.6.31-rc1 #0)
EIP: 0060:[<
c106a759>] EFLAGS:
00010246 CPU: 0
EIP is at kfree+0x80/0xda
EAX:
c17c2da0 EBX:
dc7edbdc ECX:
0000010f EDX:
00000000
ESI:
c102c700 EDI:
dc7ed8fa EBP:
d703ff2c ESP:
d703ff20
DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Process rmmod (pid: 3355, ti=
d703e000 task=
db1412c0 task.ti=
d703e000)
Stack:
dc7edbdc 00000014 00000016 d703ff40 c102c700 dc7f45d4 dc7f45d4 00000880
d703ff4c c103e571 00000000 d703ffac c103e751 66616976 da140062 db89ba80
00000328 d702edf8 db89ba80 d703ff9c c105d0f0 00000200 da14f898 00000014
Call Trace:
[<
c102c700>] ? destroy_params+0x1e/0x2b
[<
c103e571>] ? free_module+0xa2/0xd7
[<
c103e751>] ? sys_delete_module+0x1ab/0x1da
[<
c105d0f0>] ? do_munmap+0x20a/0x225
[<
c10029b4>] ? sysenter_do_call+0x12/0x26
Code: 10 76 7a 8d 87 00 00 00 40 c1 e8 0c c1 e0 05 03 05 1c 87 41 c1 66 83 38 00 79 03 8b 40 0c 8b 10 84 d2 78 12 66 f7 c2 00 c0 75 04 <0f> 0b eb fe e8 6f 5a fe ff eb 47 8b 55 04 8b 58 0c 9c 5e fa 3b
EIP: [<
c106a759>] kfree+0x80/0xda SS:ESP 0068:
d703ff20
This is caused by the current code changing the pointers assigned by
module_param. During unload it tries to free the memory the pointers
point at which is now part of an internal structure.
The patch simply avoids changing the pointers. This is okay as they are
read only once during the initialization process.
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Joseph Chan <JosephChan@via.com.tw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KAMEZAWA Hiroyuki [Thu, 6 Aug 2009 22:07:33 +0000 (15:07 -0700)]
mm: make set_mempolicy(MPOL_INTERLEAV) N_HIGH_MEMORY aware
At first, init_task's mems_allowed is initialized as this.
init_task->mems_allowed == node_state[N_POSSIBLE]
And cpuset's top_cpuset mask is initialized as this
top_cpuset->mems_allowed = node_state[N_HIGH_MEMORY]
Before 2.6.29:
policy's mems_allowed is initialized as this.
1. update tasks->mems_allowed by its cpuset->mems_allowed.
2. policy->mems_allowed = nodes_and(tasks->mems_allowed, user's mask)
Updating task's mems_allowed in reference to top_cpuset's one.
cpuset's mems_allowed is aware of N_HIGH_MEMORY, always.
In 2.6.30: After commit
58568d2a8215cb6f55caf2332017d7bdff954e1c
("cpuset,mm: update tasks' mems_allowed in time"), policy's mems_allowed
is initialized as this.
1. policy->mems_allowd = nodes_and(task->mems_allowed, user's mask)
Here, if task is in top_cpuset, task->mems_allowed is not updated from
init's one. Assume user excutes command as #numactrl --interleave=all
,....
policy->mems_allowd = nodes_and(N_POSSIBLE, ALL_SET_MASK)
Then, policy's mems_allowd can includes a possible node, which has no pgdat.
MPOL's INTERLEAVE just scans nodemask of task->mems_allowd and access this
directly.
NODE_DATA(nid)->zonelist even if NODE_DATA(nid)==NULL
Then, what's we need is making policy->mems_allowed be aware of
N_HIGH_MEMORY. This patch does that. But to do so, extra nodemask will
be on statck. Because I know cpumask has a new interface of
CPUMASK_ALLOC(), I added it to node.
This patch stands on old behavior. But I feel this fix itself is just a
Band-Aid. But to do fundametal fix, we have to take care of memory
hotplug and it takes time. (task->mems_allowd should be N_HIGH_MEMORY, I
think.)
mpol_set_nodemask() should be aware of N_HIGH_MEMORY and policy's nodemask
should be includes only online nodes.
In old behavior, this is guaranteed by frequent reference to cpuset's
code. Now, most of them are removed and mempolicy has to check it by
itself.
To do check, a few nodemask_t will be used for calculating nodemask. But,
size of nodemask_t can be big and it's not good to allocate them on stack.
Now, cpumask_t has CPUMASK_ALLOC/FREE an easy code for get scratch area.
NODEMASK_ALLOC/FREE shoudl be there.
[akpm@linux-foundation.org: cleanups & tweaks]
Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Miao Xie <miaox@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Paul Menage <menage@google.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: David Rientjes <rientjes@google.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stefani Seibold [Thu, 6 Aug 2009 22:07:30 +0000 (15:07 -0700)]
fbcon: fix rotate upside down crash
Fix the rotate_ud() function not to crash in case of a font which has not
a width of multiple by 8: The inner loop of the font pixel copy should not
access a bit outside the font memory area. Subtract the shift offset from
the font width will prevent this.
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xiao Guangrong [Thu, 6 Aug 2009 22:07:29 +0000 (15:07 -0700)]
generic-ipi: fix hotplug_cfd()
Use CONFIG_HOTPLUG_CPU, not CONFIG_CPU_HOTPLUG
When hot-unpluging a cpu, it will leak memory allocated at cpu hotplug,
but only if CPUMASK_OFFSTACK=y, which is default to n.
The bug was introduced by
8969a5ede0f9e17da4b943712429aef2c9bcd82b
("generic-ipi: remove kmalloc()").
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stoyan Gaydarov [Thu, 6 Aug 2009 22:07:28 +0000 (15:07 -0700)]
drivers/w1/masters/omap_hdq.c: fix missing mutex unlock
This was found using a semantic patch, more info can be found at:
http://www.emn.fr/x-info/coccinelle/
Signed-off-by: Stoyan Gaydarov <sgayda2@uiuc.edu>
Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Hellwig [Fri, 7 Aug 2009 17:38:34 +0000 (14:38 -0300)]
xfs: fix freeing of inodes not yet added to the inode cache
When freeing an inode that lost race getting added to the inode cache we
must not call into ->destroy_inode, because that would delete the inode
that won the race from the inode cache radix tree.
This patch uses splits a new xfs_inode_free helper out of xfs_ireclaim
and uses that plus __destroy_inode to make sure we really only free
the memory allocted for the inode that lost the race, and not mess with
the inode cache state.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reported-by: Alex Samad <alex@samad.com.au>
Reported-by: Andrew Randrianasulu <randrik@mail.ru>
Reported-by: Stephane <sharnois@max-t.com>
Reported-by: Tommy <tommy@news-service.com>
Reported-by: Miah Gregory <mace@darksilence.net>
Reported-by: Gabriel Barazer <gabriel@oxeva.fr>
Reported-by: Leandro Lucarella <llucax@gmail.com>
Reported-by: Daniel Burr <dburr@fami.com.au>
Reported-by: Nickolay <newmail@spaces.ru>
Reported-by: Michael Guntsche <mike@it-loops.com>
Reported-by: Dan Carley <dan.carley+linuxkern-bugs@gmail.com>
Reported-by: Michael Ole Olsen <gnu@gmx.net>
Reported-by: Michael Weissenbacher <mw@dermichi.com>
Reported-by: Martin Spott <Martin.Spott@mgras.net>
Reported-by: Christian Kujau <lists@nerdbynature.de>
Tested-by: Michael Guntsche <mike@it-loops.com>
Tested-by: Dan Carley <dan.carley+linuxkern-bugs@gmail.com>
Tested-by: Christian Kujau <lists@nerdbynature.de>
Christoph Hellwig [Fri, 7 Aug 2009 17:38:29 +0000 (14:38 -0300)]
vfs: add __destroy_inode
When we want to tear down an inode that lost the add to the cache race
in XFS we must not call into ->destroy_inode because that would delete
the inode that won the race from the inode cache radix tree.
This patch provides the __destroy_inode helper needed to fix this,
the actual fix will be in th next patch. As XFS was the only reason
destroy_inode was exported we shift the export to the new __destroy_inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Christoph Hellwig [Fri, 7 Aug 2009 17:38:25 +0000 (14:38 -0300)]
vfs: fix inode_init_always calling convention
Currently inode_init_always calls into ->destroy_inode if the additional
initialization fails. That's not only counter-intuitive because
inode_init_always did not allocate the inode structure, but in case of
XFS it's actively harmful as ->destroy_inode might delete the inode from
a radix-tree that has never been added. This in turn might end up
deleting the inode for the same inum that has been instanciated by
another process and cause lots of cause subtile problems.
Also in the case of re-initializing a reclaimable inode in XFS it would
free an inode we still want to keep alive.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Kenji Kaneshige [Mon, 27 Jul 2009 03:06:46 +0000 (12:06 +0900)]
PCI hotplug: SGI hotplug: do not use hotplug_slot_attr
By the pci slot changes, callbacks of attributes under slot directory
(/sys/bus/pci/slots) had been changed to get the pointer to struct
pci_slot instead of struct hotplug_slot. So the path_show() that
assumes the parameter is a pointer to struct hotplug_slot seems
broken.
Tested-by: Mike Habeck <habeck@sgi.com>
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Kenji Kaneshige [Mon, 27 Jul 2009 03:05:38 +0000 (12:05 +0900)]
PCI hotplug: SGI hotplug: fix build failure
The commit
bd3d99c17039fd05a29587db3f4a180c48da115a ("PCI: Remove
untested Electromechanical Interlock (EMI) support in pciehp."), which
removes the definition of "struct hotplug_slot_attr", broke SGI
hotplug driver. By this commit, we get the following compile error.
drivers/pci/hotplug/sgi_hotplug.c:106: error: variable 'sn_slot_path_attr' has initializer but incomplete type
drivers/pci/hotplug/sgi_hotplug.c:106: error: unknown field 'attr' specified in initializer
drivers/pci/hotplug/sgi_hotplug.c:106: error: extra brace group at end of initializer
drivers/pci/hotplug/sgi_hotplug.c:106: error: (near initialization for 'sn_slot_path_attr')
drivers/pci/hotplug/sgi_hotplug.c:106: warning: excess elements in struct initializer
drivers/pci/hotplug/sgi_hotplug.c:106: warning: (near initialization for 'sn_slot_path_attr')
drivers/pci/hotplug/sgi_hotplug.c:106: error: unknown field 'show' specified in initializer
drivers/pci/hotplug/sgi_hotplug.c:106: warning: excess elements in struct initializer
drivers/pci/hotplug/sgi_hotplug.c:106: warning: (near initialization for 'sn_slot_path_attr')
drivers/pci/hotplug/sgi_hotplug.c: In function 'sn_hp_destroy':
drivers/pci/hotplug/sgi_hotplug.c:203: error: invalid use of undefined type 'struct hotplug_slot_attribute'
drivers/pci/hotplug/sgi_hotplug.c: In function 'sn_hotplug_slot_register':
drivers/pci/hotplug/sgi_hotplug.c:655: error: invalid use of undefined type 'struct hotplug_slot_attribute'
This patch fixes this regression by adding the definition of struct
hotplug_slot_attr into sgi_hotplug.c.
Tested-by: Mike Habeck <habeck@sgi.com>
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Eric Dumazet [Fri, 7 Aug 2009 10:49:29 +0000 (12:49 +0200)]
ring-buffer: Fix memleak in ring_buffer_free()
I noticed oprofile memleaked in linux-2.6 current tree,
and tracked this ring-buffer leak.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
LKML-Reference: <
4A7C06B9.
2090302@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Dave Airlie [Fri, 7 Aug 2009 01:03:26 +0000 (11:03 +1000)]
drm/radeon/kms: setup MC/VRAM the same way for suspend/resume
we should align the GTT after VRAM no matter what, as we can
come back from resume and put in a different place and bad things happen.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Li Zefan [Fri, 7 Aug 2009 07:10:54 +0000 (15:10 +0800)]
lockdep: Fix typos in documentation
s/head/held
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <
4A7BD37E.
9060806@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Li Zefan [Fri, 7 Aug 2009 08:37:10 +0000 (16:37 +0800)]
lockdep: Fix file mode of lock_stat
/proc/lock_stat is writable.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <
4A7BE7B6.10904@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Roel Kluin [Fri, 7 Aug 2009 08:39:25 +0000 (10:39 +0200)]
[S390] KVM: Read buffer overflow
Check whether index is within bounds before testing the element.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Hendrik Brueckner [Fri, 7 Aug 2009 08:39:24 +0000 (10:39 +0200)]
[S390] kernel: Storing machine flags early in lowcore
Currently, the machine_flags are stored late in the startup
initialization which results in failing machine type checks
(e.g. for MACHINE_IS_VM).
To allow these checks, store the machine flags in the lowcore
when the machine type has been detected.
Moving the machine_flags to the lowcore has been introduced with
git commit
25097bf153391f7be4c591d47061b3dc4990dac2
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Steven Rostedt [Thu, 6 Aug 2009 23:53:18 +0000 (19:53 -0400)]
tracing: Fix recordmcount.pl to handle sections with only weak functions
Roland Dreier found that a section that contained only a weak
function in one of the staging drivers and this caused
recordmcount.pl to spit out a warning and fail.
Although it is strange that a driver would have a weak function, and
this function only be used in one place, it should not be something
to make recordmcount.pl fail.
This patch fixes the issue in a simple manner: if only weak
functions exist in a section, then that section will not be
recorded.
Reported-by: Roland Dreier <rdreier@cisco.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Thu, 6 Aug 2009 16:06:26 +0000 (18:06 +0200)]
perf_counter: Fix double list iteration in per task precise stats
Brice Goglin reported this crash with per task precise stats:
> I finally managed to test the threaded perfcounter statistics (thanks a
> lot for implementing it). I am running 2.6.31-rc5 (with the AMD
> magny-cours patches but I don't think they matter here). I am trying to
> measure local/remote memory accesses per thread during the well-known
> stream benchmark. It's compiled with OpenMP using 16 threads on a
> quad-socket quad-core barcelona machine.
>
> Command line is:
> /mnt/scratch/bgoglin/cpunode/linux-2.6.31/tools/perf/perf record -f -s
> -e r1000001e0 -e r1000002e0 -e r1000004e0 -e r1000008e0 ./stream
>
> It seems to work fine with a single -e <counter> on the command line
> while it crashes when there are at least 2 of them.
> It seems to work fine without -s as well.
A silly copy-paste resulted in a messed up iteration which would
cause the OOPS.
Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
LKML-Reference: <
1249574786.32113.550.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Wed, 5 Aug 2009 12:05:16 +0000 (14:05 +0200)]
perf: Auto-detect libelf
Adds autodetection for libelf as well, and simplifies the
libbfd code. Furthermore, fail make with an error when libelf
is not found and warn about the lack of libbfd.
Also provide an option to build a 32bit version even though you
might be running a 64bit kernel.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Arnaldo Carvalho de Melo [Wed, 5 Aug 2009 22:02:49 +0000 (19:02 -0300)]
perf symbol: Fix symbol parsing in certain cases: use the build-id as a symlink
In some cases distros have binaries and debuginfo in weird places:
[root@doppio tuna]# ls -la /usr/lib64/{xulrunner-1.9.1/xulrunner-stub,firefox-3.5.2/firefox}
-rwxr-xr-x 1 root root 90024 2009-08-03 19:45 /usr/lib64/firefox-3.5.2/firefox
-rwxr-xr-x 1 root root 90024 2009-08-03 18:23 /usr/lib64/xulrunner-1.9.1/xulrunner-stub
[root@doppio tuna]# sha1sum /usr/lib64/{xulrunner-1.9.1/xulrunner-stub,firefox-3.5.2/firefox}
19a858077d263d5de22c9c5da250d3e4396ae739 /usr/lib64/xulrunner-1.9.1/xulrunner-stub
19a858077d263d5de22c9c5da250d3e4396ae739 /usr/lib64/firefox-3.5.2/firefox
[root@doppio tuna]# rpm -qf /usr/lib64/{xulrunner-1.9.1/xulrunner-stub,firefox-3.5.2/firefox}
xulrunner-1.9.1.2-1.fc11.x86_64
firefox-3.5.2-2.fc11.x86_64
[root@doppio tuna]# ls -la /usr/lib/debug/{usr/lib64/xulrunner-1.9.1/xulrunner-stub,usr/lib64/firefox-3.5.2/firefox}.debug
ls: cannot access /usr/lib/debug/usr/lib64/firefox-3.5.2/firefox.debug: No such file or directory
-rwxr-xr-x 1 root root 403608 2009-08-03 18:22 /usr/lib/debug/usr/lib64/xulrunner-1.9.1/xulrunner-stub.debug
Seemingly we don't have a .symtab when we actually can find it
if we use the .note.gnu.build-id ELF section put in place by
some distros. Use it and find the symbols we need.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Robert Richter [Thu, 30 Jul 2009 17:19:18 +0000 (19:19 +0200)]
ring-buffer: Fix advance of reader in rb_buffer_peek()
When calling rb_buffer_peek() from ring_buffer_consume() and a
padding event is returned, the function rb_advance_reader() is
called twice. This may lead to missing samples or under high
workloads to the warning below. This patch fixes this. If a padding
event is returned by rb_buffer_peek() it will be consumed by the
calling function now.
Also, I simplified some code in ring_buffer_consume().
------------[ cut here ]------------
WARNING: at /dev/shm/.source/linux/kernel/trace/ring_buffer.c:2289 rb_advance_reader+0x2e/0xc5()
Hardware name: Anaheim
Modules linked in:
Pid: 29, comm: events/2 Tainted: G W 2.6.31-rc3-oprofile-x86_64
-standard-00059-g5050dc2 #1
Call Trace:
[<
ffffffff8106776f>] ? rb_advance_reader+0x2e/0xc5
[<
ffffffff81039ffe>] warn_slowpath_common+0x77/0x8f
[<
ffffffff8103a025>] warn_slowpath_null+0xf/0x11
[<
ffffffff8106776f>] rb_advance_reader+0x2e/0xc5
[<
ffffffff81068bda>] ring_buffer_consume+0xa0/0xd2
[<
ffffffff81326933>] op_cpu_buffer_read_entry+0x21/0x9e
[<
ffffffff810be3af>] ? __find_get_block+0x4b/0x165
[<
ffffffff8132749b>] sync_buffer+0xa5/0x401
[<
ffffffff810be3af>] ? __find_get_block+0x4b/0x165
[<
ffffffff81326c1b>] ? wq_sync_buffer+0x0/0x78
[<
ffffffff81326c76>] wq_sync_buffer+0x5b/0x78
[<
ffffffff8104aa30>] worker_thread+0x113/0x1ac
[<
ffffffff8104dd95>] ? autoremove_wake_function+0x0/0x38
[<
ffffffff8104a91d>] ? worker_thread+0x0/0x1ac
[<
ffffffff8104dc9a>] kthread+0x88/0x92
[<
ffffffff8100bdba>] child_rip+0xa/0x20
[<
ffffffff8104dc12>] ? kthread+0x0/0x92
[<
ffffffff8100bdb0>] ? child_rip+0x0/0x20
---[ end trace
f561c0a58fcc89bd ]---
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@kernel.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Benjamin Herrenschmidt [Thu, 6 Aug 2009 11:16:44 +0000 (21:16 +1000)]
perf_counter/powerpc: Check oprofile_cpu_type for NULL before using it
If the current CPU doesn't support performance counters,
cur_cpu_spec->oprofile_cpu_type can be NULL. The current
perf_counter modules don't test for that case and would thus
crash at boot time.
Bug reported by David Woodhouse.
Reported-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Paul Mackerras <paulus@samba.org>
LKML-Reference: <19066.48028.446975.501454@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Sheng Yang [Thu, 6 Aug 2009 05:31:56 +0000 (13:31 +0800)]
intel-iommu: Fix enabling snooping feature by mistake
Two defects work together result in KVM device passthrough randomly can't
work:
1. iommu_snooping is not initialized to zero when vm_iommu_init() called.
So it is possible to get a random value.
2. One line added by commit
2c2e2c38("IOMMU Identity Mapping Support")
change the code path, let it bypass domain_update_iommu_cap(), as well as
missing the increment of domain iommu reference count.
The latter is also likely to cause a leak of domains on repeated VMM
assignment and deassignment.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Marcelo Tosatti [Wed, 5 Aug 2009 18:43:58 +0000 (15:43 -0300)]
KVM: MMU: limit rmap chain length
Otherwise the host can spend too long traversing an rmap chain, which
happens under a spinlock.
Cc: stable@kernel.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Eric Miao [Wed, 5 Aug 2009 08:24:41 +0000 (01:24 -0700)]
Input: matrix_keypad - make matrix keymap size dynamic
Remove assumption on the shift and size of rows/columns form
matrix_keypad driver.
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>