OSDN Git Service
bergner [Tue, 6 Nov 2007 23:13:31 +0000 (23:13 +0000)]
* ppc-opc.c (powerpc_opcodes): Remove the dcffix and dcffix. opcodes
which are not included in the "Preliminary Decimal Floating-Point
Architecture" document.
jjohnstn [Tue, 6 Nov 2007 23:07:06 +0000 (23:07 +0000)]
2007-11-06 Dave Brolley <brolley@redhat.com>
* syscall.h (SYS_reconfig): New macro.
amodra [Tue, 6 Nov 2007 23:00:15 +0000 (23:00 +0000)]
daily update
pbrook [Tue, 6 Nov 2007 22:16:59 +0000 (22:16 +0000)]
2007-11-06 Paul Brook <paul@codesourcery.com>
gas/
* config/tc-arm.c (do_mull): Allow overlapping Rm for armv6.
gas/testsuite/
* gas/arm/mul-overlap.s: Add umull and smlal.
* gas/arm/mul-overlap.l: Update expected results.
brolley [Tue, 6 Nov 2007 21:08:04 +0000 (21:08 +0000)]
2007-11-06 Dave Brolley <brolley@redhat.com>
* gloss.cxx (target_to_host_syscall): Map syscall 0 to SYS_reconfig for
MeP.
brolley [Tue, 6 Nov 2007 21:06:52 +0000 (21:06 +0000)]
Correct typo.
brolley [Tue, 6 Nov 2007 21:06:05 +0000 (21:06 +0000)]
2007-11-06 Dave Brolley <brolley@redhat.com>
* mepCfg.cxx (MepBoardCfg): Set the gloss c omponent's
syscall-numbering-scheme attribute to "mep".
nickc [Tue, 6 Nov 2007 17:15:10 +0000 (17:15 +0000)]
* ehopt.c (check_eh_frame): If md_allow_eh_opt is defined, invoke it to see if the optimizations should be applied.
* config/tc-mn10300.h (md_allow_eh_opt): Define. Only allow call frame optimization if linker relaxation is not enabled.
* gas/elf/elf.exp: Disable ehopt test for mn10300.
corinna [Tue, 6 Nov 2007 15:48:33 +0000 (15:48 +0000)]
* thread.cc (pthread_key_create): Drop check for incoming valid object.
amodra [Tue, 6 Nov 2007 13:49:18 +0000 (13:49 +0000)]
bfd/
* elf64-ppc.c (ppc64_elf_check_relocs): Don't refcount tlsld_got here..
(ppc64_elf_gc_sweep_hook): ..or here..
(ppc64_elf_tls_optimize): ..or here. Make two passes through the
relocs, ensuring that tls_get_addr calls follow gd and ld relocs.
(allocate_dynrelocs): Refcount tlsld_got here.
(ppc64_elf_size_dynamic_sections): Allocate local got and call
allocate_dynrelocs before allocating tlsld_got.
(ppc64_elf_relocate_section): Remove check that a tls_get_addr
call follows gd and ld relocs.
ld/testsuite/
* ld-powerpc/tlsso.d: Update for changed got alloc order.
* ld-powerpc/tlsso.r: Likewise.
corinna [Tue, 6 Nov 2007 13:29:53 +0000 (13:29 +0000)]
* shm.cc: Include sync.h
(struct shm_shmid_list): Add ref_count member.
(struct shm_attached_list): Remove hdl and size members. Add a parent
member pointing to referenced shm_shmid_list entry.
(shm_guard): New muto.
(SLIST_LOCK): Define.
(SLIST_UNLOCK): Define.
(fixup_shms_after_fork): Use hdl and size members of parent
shm_shmid_list entry.
(shmat): Access sequential bookkeeping lists in a thread safe way.
Accommodate change in list element layout. Align comments.
(shmctl): Ditto.
(shmdt): Ditto.
(shmget): Ditto.
ktietz [Tue, 6 Nov 2007 12:28:57 +0000 (12:28 +0000)]
Add __ImageBase symbol to pe.em and pep.em.
amodra [Tue, 6 Nov 2007 03:59:11 +0000 (03:59 +0000)]
bfd/
* elf32-ppc.c (ppc_elf_check_relocs): Don't refcount tlsld_got here..
(ppc_elf_gc_sweep_hook): ..or here..
(ppc_elf_tls_optimize): ..or here. Make two passes through the
relocs, ensuring that tls_get_addr calls follow gd and ld relocs.
(allocate_dynrelocs): Refcount tlsld_got here.
(ppc_elf_size_dynamic_sections): Call allocate_dynrelocs before
allocating tlsld_got.
(ppc_elf_relocate_section): Remove check that a tls_get_addr
call follows gd and ld relocs.
ld/testsuite/
* ld-powerpc/tlsso32.d: Update for changed got alloc order.
gdbadmin [Tue, 6 Nov 2007 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
amodra [Mon, 5 Nov 2007 23:00:05 +0000 (23:00 +0000)]
daily update
uweigand [Mon, 5 Nov 2007 21:55:37 +0000 (21:55 +0000)]
* features/rs6000/power-core.xml: Use uint32 as register type.
* features/rs6000/power64-core.xml: Use uint64/uint32 as register type.
* features/rs6000/powerpc-32.c: Regenerate.
* features/rs6000/powerpc-403.c: Regenerate.
* features/rs6000/powerpc-403gc.c: Regenerate.
* features/rs6000/powerpc-505.c: Regenerate.
* features/rs6000/powerpc-602.c: Regenerate.
* features/rs6000/powerpc-603.c: Regenerate.
* features/rs6000/powerpc-604.c: Regenerate.
* features/rs6000/powerpc-64.c: Regenerate.
* features/rs6000/powerpc-7400.c: Regenerate.
* features/rs6000/powerpc-750.c: Regenerate.
* features/rs6000/powerpc-860.c: Regenerate.
* features/rs6000/powerpc-e500.c: Regenerate.
drow [Mon, 5 Nov 2007 19:22:08 +0000 (19:22 +0000)]
* linux-low.c: Include <sched.h>.
brobecke [Mon, 5 Nov 2007 18:24:29 +0000 (18:24 +0000)]
* breakpoint.c (set_raw_breakpoint_without_location): Make static.
brobecke [Mon, 5 Nov 2007 18:18:47 +0000 (18:18 +0000)]
* breakpoint.h (create_solib_load_event_breakpoint)
(create_solib_unload_event_breakpoint)
(create_fork_event_catchpoint, create_vfork_event_catchpoint)
(create_exec_event_catchpoint): Delete declaration.
* breakpoint.c (create_solib_load_event_breakpoint)
(solib_load_unload_1, create_solib_unload_event_breakpoint): Delete.
(create_fork_event_catchpoint, create_vfork_event_catchpoint)
(create_exec_event_catchpoint): Make static.
brobecke [Mon, 5 Nov 2007 18:09:18 +0000 (18:09 +0000)]
* breakpoint.h (set_breakpoint_sal): Remove declaration.
* breakpoint.c (set_breakpoint_sal): Delete.
brobecke [Mon, 5 Nov 2007 18:06:10 +0000 (18:06 +0000)]
* buildsym.c (finish_block): Remove "#if 1"/"#endif" brackets.
(make_blockvector): Likewise. Remove FIXME comment.
brolley [Mon, 5 Nov 2007 15:46:19 +0000 (15:46 +0000)]
2007-11-05 Dave Brolley <brolley@redhat.com>
* intrinsics.scm,cgen-intrinsics.scm: New application which
generates code to support intrinsic functions for insns in the
mep architecture in gcc.
corinna [Mon, 5 Nov 2007 15:45:52 +0000 (15:45 +0000)]
* bsd_helper.cc (tunable_params): Add kern.ipc.shm_allow_removed as
bool parameter.
* cygserver.conf: Add a description for the kern.ipc.shm_allow_removed
parameter.
* sysv_shm.cc (shminit): Set shm_allow_removed variable according to
kern.ipc.shm_allow_removed setting.
corinna [Mon, 5 Nov 2007 15:25:55 +0000 (15:25 +0000)]
* shm.cc (shmctl): On IPC_RMID don't unmap views and don't close handle
if the map is still referenced to emulate Linux and BSD behaviour.
luisgpm [Mon, 5 Nov 2007 11:32:30 +0000 (11:32 +0000)]
* printcmd.c: (printf_command): Add support for new DFP
modifiers %H, %D and %DD.
* configure.ac: Add check for DECFLOAT printf support.
* configure: Regenerated.
* doc/gdb.texinfo: Update printf command's description.
* testsuite/gdb.base/printcmds.exp: New function
test_printf_with_dfp.
corinna [Mon, 5 Nov 2007 10:15:30 +0000 (10:15 +0000)]
* shm.cc (shmctl): On IPC_RMID also unmap all views on shared mem
as well as connected shm_attached_list entry.
amodra [Mon, 5 Nov 2007 02:14:49 +0000 (02:14 +0000)]
* ld-elf/merge3.d, ld-elf/merge3.s: Delete.
amodra [Mon, 5 Nov 2007 02:13:46 +0000 (02:13 +0000)]
* merge.c (sec_merge_hash_lookup): Revert last change.
(record_section): Likewise.
(_bfd_merge_sections): Likewise.
(_bfd_merged_section_offset): Properly handle NULL secinfo.
(_bfd_add_merge_section): Allocate extra space for a zero
terminator on SEC_STRINGS sections.
gdbadmin [Mon, 5 Nov 2007 00:00:34 +0000 (00:00 +0000)]
*** empty log message ***
dannysmith [Sun, 4 Nov 2007 23:49:08 +0000 (23:49 +0000)]
include
* coff/pe.h (COFF_ENCODE_ALIGNMENT) Define.
gas
* read.c (ALIGN_LIMIT): Rename to ...
(TC_ALIGN_LIMIT): Guard against prior definition.
* config/tc-i386.h (TC_ALIGN_LIMIT)[TE_PE]: Define.
bfd
* pe-i386.c (COFF_SECTION_ALIGNMENT_ENTRIES): Let .data, .text
and .bss section use the default.
* pei-i386.c (COFF_SECTION_ALIGNMENT_ENTRIES): Likewise.
ld/testsuite
* ld-scripts/align.exp: Enable for PECOFF.
* ld-scripts/alignof.exp: Likewise.
amodra [Sun, 4 Nov 2007 23:00:05 +0000 (23:00 +0000)]
daily update
gdbadmin [Sun, 4 Nov 2007 00:00:34 +0000 (00:00 +0000)]
*** empty log message ***
amodra [Sat, 3 Nov 2007 23:00:05 +0000 (23:00 +0000)]
daily update
gdbadmin [Sat, 3 Nov 2007 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
iant [Fri, 2 Nov 2007 23:02:43 +0000 (23:02 +0000)]
From Craig Silverstein: Add first version of generating error messages
with file name and line number.
amodra [Fri, 2 Nov 2007 23:00:05 +0000 (23:00 +0000)]
daily update
devans [Fri, 2 Nov 2007 20:33:12 +0000 (20:33 +0000)]
* gdb.disasm/t01_mov.s: Remove carriage returns.
* gdb.disasm/t02_mova.s: Ditto.
* gdb.disasm/t03_add.s: Ditto.
* gdb.disasm/t04_sub.s: Ditto.
* gdb.disasm/t05_cmp.s: Ditto.
* gdb.disasm/t06_ari2.s: Ditto.
* gdb.disasm/t07_ari3.s: Ditto.
* gdb.disasm/t08_or.s: Ditto.
* gdb.disasm/t09_xor.s: Ditto.
* gdb.disasm/t10_and.s: Ditto.
* gdb.disasm/t11_logs.s: Ditto.
* gdb.disasm/t12_bit.s: Ditto.
* gdb.disasm/t13_otr.s: Ditto.
uweigand [Fri, 2 Nov 2007 19:35:18 +0000 (19:35 +0000)]
* gdbtypes.h (struct cplus_struct_type): Remove runtime_ptr member.
(TYPE_RUNTIME_PTR, TYPE_VTABLE, TYPE_HAS_VTABLE,
TYPE_PRIMARY_BASE, TYPE_VIRTUAL_BASE_LIST): Remove macros.
(HP_ACC_VFUNC_START, HP_ACC_VBASE_START, HP_ACC_TYPEINFO_OFFSET,
HP_ACC_TOP_OFFSET_OFFSET): Likewise.
(has_vtable, primary_base_class, virtual_base_list_length,
virtual_base_list_length_skip_primaries, virtual_base_index,
virtual_base_index_skip_primaries, class_index_in_primary_list,
count_virtual_fns): Remove prototypes.
* gdbtypes.c (has_vtable, primary_base_class, current_vbase_list,
virtual_base_list_aux, virtual_base_list, virtual_base_list_length,
virtual_base_list_length_skip_primaries, virtual_base_index,
virtual_base_index_skip_primaries, class_index_in_primary_list,
count_virtual_fns): Remove.
* cp-valprint.c (cp_print_hpacc_virtual_table_entries): Remove.
(hpacc_vtbl_ptr_name, hpacc_vtbl_ptr_type_name): Remove.
(cp_print_value_fields): Remove support for HP aCC vtables.
(cp_print_value): Likewise.
* c-typeprint.c (c_type_print_base): Likewise.
* value.h (find_rt_vbase_offset): Remove prototype.
* valops.c (find_rt_vbase_offset): Remove.
(search_struct_method): Remove support for HP aCC vtables.
(find_method_list): Likewise.
uweigand [Fri, 2 Nov 2007 19:34:11 +0000 (19:34 +0000)]
* language.h (struct language_defn): Remove la_builtin_type_vector
and string_char_type members.
* language.c (language_string_char_type): No longer consult
la->string_char_type.
(language_lookup_primitive_type_by_name): No longer consult
current_language->la_builtin_type_vector.
* language.c (unknown_language_defn, auto_language_defn,
local_language_defn): Adapt initializer.
* ada-lang.c (ada_language_defn): Likewise.
* c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn,
minimal_language_defn): Likewise.
* f-lang.c (f_language_defn): Likewise.
* jv-lang.c (java_language_defn): Likewise.
* m2-lang.c (m2_language_defn): Likewise.
* objc-lang.c (objc_language_defn): Likewise.
* p-lang.c (pascal_language_defn): Likewise.
* scm-lang.c (scm_language_defn): Likewise.
uweigand [Fri, 2 Nov 2007 14:47:27 +0000 (14:47 +0000)]
2007-11-02 Markus Deuling <deuling@de.ibm.com>
* frame.c (frame_id_inner): Add gdbarch parameter. Replace
current_gdbarch by gdbarch.
(frame_find_by_id, get_prev_frame_1): Use get_frame_arch to get at the
current architecture by frame_info.
* frame.h (frame_id_inner): Add gdbarch parameter.
* stack.c (return_command): Use get_frame_arch to get at the current
architecture by frame_info. Update call of frame_id_inner.
* infrun.c (handle_inferior_event): Likewise.
* dummy-frame.c (dummy_frame_push): Use get_regcache_arch to get at the
current architecture by regcache. Update call of frame_id_inner.
uweigand [Fri, 2 Nov 2007 14:27:08 +0000 (14:27 +0000)]
2007-11-02 Markus Deuling <deuling@de.ibm.com>
* gdbarch.sh (register_name): Add gdbarch parameter.
* gdbarch.{c,h}: Regenerate.
* target-descriptions.c (tdesc_register_name): Add gdbarch parameter.
(tdesc_register_name): Replace current_gdbarch by gdbarch.
* target-descriptions.h (tdesc_register_name): Add gdbarch parameter.
* xstormy16-tdep.c (xstormy16_register_name): Add gdbarch parameter.
* vax-tdep.c (vax_register_name): Add gdbarch parameter.
* spu-tdep.c (spu_register_name): Add gdbarch parameter.
* s390-tdep.c (s390_register_name): Add gdbarch parameter.
* mt-tdep.c (mt_register_name): Add gdbarch parameter.
(mt_registers_info): Replace current_gdbarch by gdbarch.
(mt_register_reggroup_p): Add gdbarch to mt_register_name call.
* mips-tdep.c (mips_register_name): Add gdbarch parameter. Replace
current_gdbarch by gdbarch.
(mips_register_name): Add gdbarch to tdesc_register_name call.
* mep-tdep.c (mep_register_name): Add gdbarch parameter. Replace
current_gdbarch by gdbarch.
(mep_register_reggroup_p): Add gdbarch to mep_register_name call.
* m32c-tdep.c (m32c_register_name): Add gdbarch parameter. Replace
current_gdbarch by gdbarch.
* m88k-tdep.c (m88k_register_name): Add gdbarch parameter.
* m68k-tdep.c (m68k_register_name): Add gdbarch parameter.
* m32r-tdep.c (m32r_register_name): Add gdbarch parameter.
(m32r_frame_unwind_cache): Use get_frame_arch to get at the current
architecture by frame_info.
* iq2000-tdep.c (iq2000_register_name): Add gdbarch parameter.
* ia64-tdep.c (ia64_register_name): Add gdbarch parameter.
* hppa-tdep.c (hppa32_register_name, hppa64_register_name): Add gdbarch
parameter.
* h8300-tdep.c (h8300_register_name, h8300s_register_name)
(h8300sx_register_name): Add gdbarch parameter.
* cris-tdep.c (cris_register_name, crisv32_register_name): Add
gdbarch parameter. Replace current_gdbarch by gdbarch.
(cris_gdbarch_init): Replace current_gdbarch by gdbarch (comment).
* avr-tdep.c (avr_register_name): Add gdbarch parameter.
* arm-tdep.c (arm_register_name): Add gdbarch paramete
* amd64-tdep.c (amd64_register_name): Add gdbarch parameter. Update
caller.
* amd64-tdep.h (amd64_register_name): Add gdbarch parameter.
* amd64-linux-tdep.c (amd64_linux_register_name): Add gdbarch parameter.
* alpha-tdep.c (alpha_register_name): Add gdbarch parameter.
(alpha_cannot_fetch_register, alpha_cannot_store_register): Update call
of alpha_register_name.
* frv-tdep.c (frv_register_name): Add gdbarch parameter.
* i386-tdep.c (i386_register_name): Add gdbarch parameter. Replace
current_gdbarch by gdbarch.
(i386_register_type): Replace ?current_gdbarch by gdbarch.
* i386-tdep.h (i386_register_name): Add gdbarch parameter.
* i386-linux-tdep.c (i386_linux_register_name): Add gdbarch parameter.
* m68hc11-tdep.c (m68hc11_register_name): Add gdbarch parameter.
(m68hc11_register_reggroup_p): Add gdbarch to call of
m68hc11_register_name.
* mn10300-tdep.c (mn10300_generic_register_name, am33_register_name)
(am33_2_register_name): Add gdbarch parameter.
(mn10300_frame_unwind_cache): Use get_frame_arch to get at the current
architecture by frame_info.
(mn10300_dump_tdep): Replace current_gdbarch by gdbarch.
* rs6000-tdep.c (rs6000_register_name): Add gdbarch parameter. Replace
current_gdbarch by gdbarch.
* score-tdep.c (score_register_name): Add gdbarch parameter.
(score_return_value, score_push_dummy_call): Replace current_gdbarch
by gdbarch.
* sh64-tdep.c (sh64_register_name): Add gdbarch parameter.
(sh64_compact_reg_base_num, sh64_register_convert_to_virtual)
(sh64_register_convert_to_raw, sh64_fv_reg_base_num)
(sh64_dr_reg_base_num, sh64_fpp_reg_base_num): Add gdbarch parameter
and update caller. Replace current_gdbarch by gdbarch.
(sh64_extract_return_value, sh64_store_return_value): Use
get_regcache_arch to get at the current architecture by regcache.
* sh-tdep.c (sh_sh_register_name, sh_sh3_register_name)
(sh_sh3e_register_name, sh_sh2e_register_name, sh_sh2a_register_name)
(sh_sh2a_nofpu_register_name, sh_sh_dsp_register_name)
(sh_sh3_dsp_register_name, sh_sh4_register_name)
(sh_sh4_nofpu_register_name, sh_sh4al_dsp_register_name): Add gdbarch
parameter.
(fv_reg_base_num, dr_reg_base_num, sh_justify_value_in_reg)
(sh_next_flt_argreg): Add gdbarch parameter and update caller. Replace
current_gdbarch by gdbarch.
(sh_extract_return_value_fpu, sh_store_return_value_fpu): Use
get_regcache_arch to get at the current architecture by regcache.
* sparc-tdep.c (sparc32_register_name): Add gdbarch parameter.
* sparc64-tdep.c (sparc64_register_name): Add gdbarch parameter.
* v850-tdep.c (v850_register_name, v850e_register_name): Add gdbarch
parameter.
(v850_unwind_sp, v850_unwind_pc): Replace current_gdbarch by gdbarch.
* xtensa-tdep.c (xtensa_register_name): Add gdbarch parameter. Replace
current_gdbarch by gdbarch.
(xtensa_pseudo_register_read, xtensa_pseudo_register_write)
(xtensa_frame_prev_register): Add gdbarch parameter to
xtensa_register_name call.
iant [Fri, 2 Nov 2007 04:08:52 +0000 (04:08 +0000)]
From Cary Coutant: Correct generation of RELATIVE relocs.
iant [Fri, 2 Nov 2007 03:31:41 +0000 (03:31 +0000)]
From Craig Silverstein: Add more DWARF info, add some i386 comments.
iant [Fri, 2 Nov 2007 03:28:52 +0000 (03:28 +0000)]
Reworked from Andrew Chatham: report error locations.
bwilson [Fri, 2 Nov 2007 00:45:34 +0000 (00:45 +0000)]
* config/tc-xtensa.c (xtensa_symbol_new_hook): New.
(xtensa_mark_difference_of_two_symbols): New.
(xtensa_post_relax_hook): Call xtensa_mark_difference_of_two_symbols.
* config/tc-xtensa.h (xtensa_symfield_type): Add next_expr_symbol.
(tc_symbol_new_hook): Define.
gdbadmin [Fri, 2 Nov 2007 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
amodra [Thu, 1 Nov 2007 23:00:05 +0000 (23:00 +0000)]
daily update
drow [Thu, 1 Nov 2007 19:19:39 +0000 (19:19 +0000)]
* linux-low.c (linux_tracefork_grandchild): New.
(linux_tracefork_child): Use clone.
(linux_test_for_tracefork): Use clone; allocate and free a stack.
hjl [Thu, 1 Nov 2007 19:06:53 +0000 (19:06 +0000)]
gas/
2007-11-01 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (md_assemble): Replace no_xsuf with
no_ldsuf.
(match_template): Likewise.
opcodes/
2007-11-01 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (opcode_modifiers): Replace No_xSuf with
No_ldSuf.
* i386-opc.tbl: Likewise.
* i386-opc.h (No_xSuf): Renamed to ...
(No_ldSuf): This.
(FWait): Updated.
hjl [Thu, 1 Nov 2007 18:40:53 +0000 (18:40 +0000)]
2007-11-01 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.h (LONG_DOUBLE_MNEM_SUFFIX): Use a non-ascii
letter.
jkratoch [Thu, 1 Nov 2007 17:34:57 +0000 (17:34 +0000)]
* gdb.cp/arg-reference.exp, gdb.cp/arg-reference.c: New files.
hjl [Thu, 1 Nov 2007 16:27:06 +0000 (16:27 +0000)]
gas/
2007-11-01 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (process_suffix): Check addrprefixop0 to
see if the address size override prefix changes the size of the
first operand.
(check_byte_reg): Don't warn if byteokintel is set.
(check_long_reg): Set i.suffix to QWORD_MNEM_SUFFIX if toqword
is set.
(check_qword_reg): Set i.suffix to LONG_MNEM_SUFFIX if todword
is set.
gas/testsuite/
2007-11-01 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.d: New.
* gas/i386/i386.s: Likewise.
* gas/i386/i386.exp: Run i386.
* gas/i386/x86_64.s: Add tests for movsx, movsbl, movsbq,
movsbw, movswl, movswq, movzx, movzb, movzbl, movzbq,
movzbw, movzwl and movzwq.
* gas/i386/x86_64.d: Updated.
opcodes/
2007-11-01 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (opcode_modifiers): Add ByteOkIntel, ToDword,
ToQword and AddrPrefixOp0.
* i386-opc.h (ByteOkIntel): New.
(ToDword): Likewise.
(ToQword): Likewise.
(AddrPrefixOp0): Likewise.
(IsPrefix): Updated.
(i386_opcode_modifier): Add byteokintel, todword, toqword
and addrprefixop0.
* i386-opc.tbl (cvtss2si): Add ToQword.
(cvttss2si): Likewise.
(cvtsd2si): Add ToDword.
(cvttsd2si): Likewise.
(monitor): Add AddrPrefixOp0.
(invlpga): Likewise.
(vmload): Likewise.
(vmrun): Likewise.
(vmsave): Likewise.
(pextrb): Add ByteOkIntel.
(pinsrb): Likewise.
* i386-tbl.h: Regenerated.
jsm28 [Thu, 1 Nov 2007 11:45:19 +0000 (11:45 +0000)]
bfd:
* merge.c (sec_merge_hash_lookup): Add parameter sec_end. Check
for unterminated strings. All callers changed.
(record_section): Add parameter abfd. Give error message for
unterminated strings.
(_bfd_merge_sections): Update call to record_section.
(_bfd_write_merged_section, _bfd_merged_section_offset): Handle
NULL secinfo from merge failures.
ld/testsuite:
* ld-elf/merge3.d, ld-elf/merge3.s: New.
iant [Thu, 1 Nov 2007 00:19:30 +0000 (00:19 +0000)]
From Cary Coutant: More support for -shared, including fixes to GOT
handling.
gdbadmin [Thu, 1 Nov 2007 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
uweigand [Wed, 31 Oct 2007 23:45:10 +0000 (23:45 +0000)]
* ppc-linux-tdep.c (ppc_linux_skip_trampoline_code): Fall back to
find_solib_trampoline_target if PC is not in .plt section.
hjl [Wed, 31 Oct 2007 23:41:12 +0000 (23:41 +0000)]
2007-10-31 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (USE_REG_TABLE): Defined as the previous one + 1.
(USE_REG_TABLE): Likewise.
(USE_MOD_TABLE): Likewise.
(USE_RM_TABLE): Likewise.
(USE_PREFIX_TABLE): Likewise.
(USE_X86_64_TABLE): Likewise.
(USE_3BYTE_TABLE): Likewise.
amodra [Wed, 31 Oct 2007 23:00:05 +0000 (23:00 +0000)]
daily update
dj [Wed, 31 Oct 2007 22:22:31 +0000 (22:22 +0000)]
* libc/signal/signal.c (_raise_r): Don't attempt to initialize the
signal table, just use a default, in case initialization cause
recursion.
brobecke [Wed, 31 Oct 2007 21:39:14 +0000 (21:39 +0000)]
* Makefile.in: Use $(SHELL) instead of "sh" to call regdat.sh.
uweigand [Wed, 31 Oct 2007 19:09:13 +0000 (19:09 +0000)]
* elfread.c (elf_symtab_read): When constructing a solib trampoline
minimal symbol from an undefined dynamic symbol, use proper section.
dj [Wed, 31 Oct 2007 18:37:19 +0000 (18:37 +0000)]
merge from gcc
eweddington [Wed, 31 Oct 2007 18:11:28 +0000 (18:11 +0000)]
2007-10-31 Eric B. Weddington <eweddington@cso.atmel.com>
* config/tc-avr.c (mcu_types): Remove devices that were never produced:
attiny10, atmega83, atmega85, atmega603.
* doc/c-avr.texi: Likewise.
nickc [Wed, 31 Oct 2007 17:13:53 +0000 (17:13 +0000)]
Add cast to avoid compile time warning
nickc [Wed, 31 Oct 2007 16:09:52 +0000 (16:09 +0000)]
* dwarf.c (is_relocatable): Remove definition.
(display_debug_frames): Remove check in is_relocatable.
* dwarf.h (is_relocatable): Remove declaration.
* objdump.c (is_relocatable): New static definition.
* readelf.c (dump_relocations): Make the function void.
(is_32bit_abs_reloc): Add support for x86, Arc, Arm, D10V, Dlx, OR32 and Score.
(is_32bit_pcrel_reloc): Add support for x86 and Arm.
(is_16bit_abs_reloc): Add support for D10V.
(debug_apply_rela_addends): Rename to debug_apply_relocations.
Add code to support rel relocations.
(load_debug_section): Fix call to debug_apply_relocations.
(get_file_header): Remove setting of is_relocatable.
* gas/cfi/cfi-common-6.d: Allow for possible relocation of the .debug.eh_frame section.
corinna [Wed, 31 Oct 2007 16:06:01 +0000 (16:06 +0000)]
* net.cc (load_ipv6_funcs): Use MAX_PATH instead of CYG_MAX_PATH.
(cygwin_getaddrinfo): Simplify formatting.
(cygwin_getnameinfo): Ditto.
brolley [Wed, 31 Oct 2007 14:48:04 +0000 (14:48 +0000)]
2007-10-31 Dave Brolley <brolley@redhat.com>
* components.cxx (mepfamily_component_library): Correct DLLEXPORT
specification.
uweigand [Wed, 31 Oct 2007 14:15:48 +0000 (14:15 +0000)]
2007-10-31 Markus Deuling <deuling@de.ibm.com>
* arm-linux-nat.c (fetch_register, fetch_regs): Use get_regcache_arch
to get at the current architecture by regcache.
corinna [Wed, 31 Oct 2007 13:23:31 +0000 (13:23 +0000)]
* external.cc (get_cygdrive_info): Make inline.
(get_cygdrive_prefixes): Remove.
(cygwin_internal): Call get_cygdrive_info with NULL flag parameters
instead of get_cygdrive_prefixes.
* path.cc (mount_info::get_cygdrive_info): Allow NULL flag parameters.
nickc [Wed, 31 Oct 2007 11:33:27 +0000 (11:33 +0000)]
* elf-m10300.c (mn10300_elf_relax_delete_bytes): Do not look for align
relocs when there are no relocs attached to the section.
amodra [Wed, 31 Oct 2007 07:40:11 +0000 (07:40 +0000)]
* readelf.c (debug_apply_rela_addends): Clarify FIXME.
amodra [Wed, 31 Oct 2007 07:36:45 +0000 (07:36 +0000)]
* elf-bfd.h (bfd_elf_match_symbols_in_sections): Don't declare.
* elflink.c (bfd_elf_match_symbols_in_sections): Make static.
Remove section name comparisons.
gdbadmin [Wed, 31 Oct 2007 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
amodra [Tue, 30 Oct 2007 23:00:06 +0000 (23:00 +0000)]
daily update
uweigand [Tue, 30 Oct 2007 22:29:05 +0000 (22:29 +0000)]
* gdb.base/dfp-test.exp: Fail gracefully if toolchain does not
provide DFP support.
uweigand [Tue, 30 Oct 2007 22:00:28 +0000 (22:00 +0000)]
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* libunwind-frame.c (libunwind_frame_sniffer)
libunwind_frame_prev_register, libunwind_sigtramp_frame_sniffer)
(libunwind_frame_cache): Use get_frame_arch to get at the current
architecture by frame_info.
(libunwind_get_reg_special): Replace current_gdbarch by gdbarch.
uweigand [Tue, 30 Oct 2007 21:59:42 +0000 (21:59 +0000)]
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* iq2000-tdep.c (iq2000_frame_prev_register): Use get_frame_arch to get
at the current architecture by frame_info.
uweigand [Tue, 30 Oct 2007 21:58:58 +0000 (21:58 +0000)]
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* inf-child.c (inf_child_fetch_inferior_registers): Use
get_regcache_arch to get at the current architecture by regcache.
uweigand [Tue, 30 Oct 2007 21:58:01 +0000 (21:58 +0000)]
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* inf-ptrace.c (inf_ptrace_fetch_registers)
(inf_ptrace_fetch_register, inf_ptrace_store_register)
(inf_ptrace_store_registers): Use get_regcache_arch to get at the
current architecture by regcache.
uweigand [Tue, 30 Oct 2007 21:57:04 +0000 (21:57 +0000)]
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* hpux-thread.c (hpux_thread_fetch_registers)
(hpux_thread_store_registers): Use get_regcache_arch to get at the
current architecture by regcache.
uweigand [Tue, 30 Oct 2007 21:56:12 +0000 (21:56 +0000)]
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* hppa-tdep.c (hppa_frame_cache): Use get_frame_arch to get at the
current architecture by frame_info.
uweigand [Tue, 30 Oct 2007 21:54:06 +0000 (21:54 +0000)]
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* go32-nat.c (fetch_register, go32_fetch_registers, store_register)
(go32_store_registers): Use get_regcache_arch to get at the current
architecture by regcache.
uweigand [Tue, 30 Oct 2007 21:53:18 +0000 (21:53 +0000)]
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* gdbtypes.c (gdbtypes_post_init): Replace current_gdbarch by gdbarch.
uweigand [Tue, 30 Oct 2007 21:52:25 +0000 (21:52 +0000)]
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Use get_frame_arch
to get at the current architecture by frame_info.
uweigand [Tue, 30 Oct 2007 21:51:34 +0000 (21:51 +0000)]
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* f-lang.c (build_fortran_types): Replace current_gdbarch by gdbarch.
uweigand [Tue, 30 Oct 2007 21:50:45 +0000 (21:50 +0000)]
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* core-regset.c (fetch_core_registers): Use get_regcache_arch to get at
the current architecture by regcache.
uweigand [Tue, 30 Oct 2007 21:46:25 +0000 (21:46 +0000)]
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* corelow.c (get_core_registers): Use get_regcache_arch to get at the
current architecture by regcache.
uweigand [Tue, 30 Oct 2007 21:45:17 +0000 (21:45 +0000)]
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* bsd-uthread.c (bsd_uthread_fetch_registers)
(bsd_uthread_store_registers): Use get_regcache_arch to get at the
current architecture by regcache.
uweigand [Tue, 30 Oct 2007 21:44:20 +0000 (21:44 +0000)]
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* avr-tdep.c (avr_frame_unwind_cache, avr_frame_prev_register): Use
get_frame_arch to get at the current architecture by frame_info.
uweigand [Tue, 30 Oct 2007 21:43:33 +0000 (21:43 +0000)]
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* arm-tdep.c (arm_get_next_pc): Replace current_gdbarch by gdbarch.
uweigand [Tue, 30 Oct 2007 21:42:22 +0000 (21:42 +0000)]
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* armnbsd-nat.c (arm_supply_gregset, fetch_register, store_register)
(store_regs): Use get_regcache_arch to get at the current architecture
by regcache.
uweigand [Tue, 30 Oct 2007 21:41:21 +0000 (21:41 +0000)]
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* arm-linux-tdep.c (arm_linux_supply_gregset): Use get_regcache_arch
to get at the current architecture by regcache.
uweigand [Tue, 30 Oct 2007 21:40:22 +0000 (21:40 +0000)]
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* alphabsd-nat.c (alphabsd_fetch_inferior_registers)
(alphabsd_store_inferior_registers): Use get_regcache_arch to get at
the current architecture by regcache.
uweigand [Tue, 30 Oct 2007 21:39:14 +0000 (21:39 +0000)]
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* ada-lang.c (ada_language_arch_info): Replace current_gdbarch by
gdbarch.
drow [Tue, 30 Oct 2007 19:35:34 +0000 (19:35 +0000)]
* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Check the selected
soft float and vector ABIs. Support the generic vector ABI for
AltiVec types.
(do_ppc_sysv_return_value): Likewise. Correct argument types and
casts.
(ppc64_sysv_abi_push_dummy_call): Assert that floating point is
supported.
* ppc-tdep.h (enum powerpc_vector_abi): New.
(struct gdbarch_tdep): Add soft_float and vector_abi.
* rs6000-tdep.c (setpowerpccmdlist, showpowerpccmdlist)
(powerpc_soft_float_global, powerpc_vector_strings)
(powerpc_vector_abi_global, powerpc_vector_abi_string): New.
(rs6000_gdbarch_init): Check for soft-float and vector ABI markings.
(set_powerpc_command, show_powerpc_command, powerpc_set_soft_float)
(powerpc_set_vector_abi): New.
(_initialize_rs6000_tdep): Register "set powerpc" and "show powerpc"
commands.
* Makefile.in (elf_ppc_h): New.
(rs6000-tdep.o): Update.
* gdb.texinfo (PowerPC): Document "set powerpc vector-abi" and "set
powerpc soft-float".
* gdb.arch/altivec-abi.exp: Run multiple times for GCC on GNU/Linux.
Test "set powerpc vector-abi". Skip auto-detection tests for old
toolchains.
palves [Tue, 30 Oct 2007 19:23:17 +0000 (19:23 +0000)]
* lib/gdb.exp, gdb.base/sepdebug.exp: Replace usage of eq and ne
with [string compare].
palves [Tue, 30 Oct 2007 19:16:44 +0000 (19:16 +0000)]
* gdb.base/sepdebug.exp (binfile): Add ${EXEEXT}.
* gdb.base/sepsymtab.exp (binfile): Add ${EXEEXT}.
nickc [Tue, 30 Oct 2007 15:18:28 +0000 (15:18 +0000)]
* mn10300.h (R_MN10300_ALIGN): Define.
* reloc.c (BFD_RELOC_MN10300_ALIGN): Add.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf-m10300.h: Handle R_MN10300_ALIGN relocs.
* mn10300_elf_relax_delete_bytes): Honour R_MN10300_ALIGN relocs.
Re-fix off by one error in comparisons.
* config/tc-mn10300.c (tc_gen_reloc): Fix test that decides when
sym_diff relocs should be generated.
(md_apply_fix): Skip R_MN10300_ALIGN relocs.
(mn10300_fix_adjustable): Do not adjust R_MN10300_ALIGN relocs.
(mn10300_handle_align): New function. Generate R_MN10300_ALIGN
relocs to record alignment requests.
* config/tc-mn10300.h (TC_FORCE_RELOCATION_SUB_SAME): Also force
R_MN10300_ALIGN relocs.
(HANDLE_ALIGN): Define. Call mn10300_handle_align.
* gas/all/gas.exp: Do not run diff1.s test for mn10300.
* ld-mn10300/mn10300.exp: Run new tests. Skip i126256 test if
a compiler is not available.
* ld-mn10300/i112045-3.s: New test.
* ld-mn10300/i112045-3.d: Expected disassembly.
* ld-mn10300/i135409.s: Rename to i135409-1.s.
* ld-mn10300/i135409.d: Rename to i135409-1.d
* ld-mn10300/i135409-2.s: New test.
* ld-mn10300/i135409-2.d: Expected symbol table.
* ld-mn10300/i36434.d: Adjust expected disassembly.
nickc [Tue, 30 Oct 2007 14:23:22 +0000 (14:23 +0000)]
* doc/as.texinfo (Section): Replace "subsegment" with subsection".
corinna [Tue, 30 Oct 2007 12:32:15 +0000 (12:32 +0000)]
* fhandler_disk_file.cc (fhandler_base::fstat_helper): Don't remove
write bits for directories with R/O attribute.
(fhandler_base::fhaccess): Don't shortcircuit R/O attribute with W_OK
scenarios for directories.