KVM: nVMX: Plumb L2 GPA through to PML emulation

commit 2dbebf7ae1ed9a420d954305e2c9d5ed39ec57c3 upstream.

Explicitly pass the L2 GPA to kvm_arch_write_log_dirty(), which for all
intents and purposes is vmx_write_pml_buffer(), instead of having the
latter pull the GPA from vmcs.GUEST_PHYSICAL_ADDRESS.  If the dirty bit
update is the result of KVM emulation (rare for L2), then the GPA in the
VMCS may be stale and/or hold a completely unrelated GPA.

Fixes: c5f983f6e8455 ("nVMX: Implement emulated Page Modification Logging")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200622215832.22090-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: X86: Fix MSR range of APIC registers in X2APIC mode

commit bf10bd0be53282183f374af23577b18b5fbf7801 upstream.

Only MSR address range 0x800 through 0x8ff is architecturally reserved
and dedicated for accessing APIC registers in x2APIC mode.

Fixes: 0105d1a52640 ("KVM: x2apic interface to lapic")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200616073307.16440-1-xiaoyao.li@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

erofs: fix partially uninitialized misuse in z_erofs_onlinepage_fixup

commit 3c597282887fd55181578996dca52ce697d985a5 upstream.

Hongyu reported "id != index" in z_erofs_onlinepage_fixup() with
specific aarch64 environment easily, which wasn't shown before.

After digging into that, I found that high 32 bits of page->private
was set to 0xaaaaaaaa rather than 0 (due to z_erofs_onlinepage_init
behavior with specific compiler options). Actually we only use low
32 bits to keep the page information since page->private is only 4
bytes on most 32-bit platforms. However z_erofs_onlinepage_fixup()
uses the upper 32 bits by mistake.

Let's fix it now.

Reported-and-tested-by: Hongyu Jin <hongyu.jin@unisoc.com>
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20200618234349.22553-1-hsiangkao@aol.com
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: sysfs: Fix pm_profile_attr type

commit e6d701dca9893990d999fd145e3e07223c002b06 upstream.

When running a kernel with Clang's Control Flow Integrity implemented,
there is a violation that happens when accessing
/sys/firmware/acpi/pm_profile:

$ cat /sys/firmware/acpi/pm_profile
0

$ dmesg
...
[   17.352564] ------------[ cut here ]------------
[   17.352568] CFI failure (target: acpi_show_profile+0x0/0x8):
[   17.352572] WARNING: CPU: 3 PID: 497 at kernel/cfi.c:29 __cfi_check_fail+0x33/0x40
[   17.352573] Modules linked in:
[   17.352575] CPU: 3 PID: 497 Comm: cat Tainted: G        W         5.7.0-microsoft-standard+ #1
[   17.352576] RIP: 0010:__cfi_check_fail+0x33/0x40
[   17.352577] Code: 48 c7 c7 50 b3 85 84 48 c7 c6 50 0a 4e 84 e8 a4 d8 60 00 85 c0 75 02 5b c3 48 c7 c7 dc 5e 49 84 48 89 de 31 c0 e8 7d 06 eb ff <0f> 0b 5b c3 00 00 cc cc 00 00 cc cc 00 85 f6 74 25 41 b9 ea ff ff
[   17.352577] RSP: 0018:ffffaa6dc3c53d30 EFLAGS: 00010246
[   17.352578] RAX: 331267e0c06cee00 RBX: ffffffff83d85890 RCX: ffffffff8483a6f8
[   17.352579] RDX: ffff9cceabbb37c0 RSI: 0000000000000082 RDI: ffffffff84bb9e1c
[   17.352579] RBP: ffffffff845b2bc8 R08: 0000000000000001 R09: ffff9cceabbba200
[   17.352579] R10: 000000000000019d R11: 0000000000000000 R12: ffff9cc947766f00
[   17.352580] R13: ffffffff83d6bd50 R14: ffff9ccc6fa80000 R15: ffffffff845bd328
[   17.352582] FS:  00007fdbc8d13580(0000) GS:ffff9cce91ac0000(0000) knlGS:0000000000000000
[   17.352582] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   17.352583] CR2: 00007fdbc858e000 CR3: 00000005174d0000 CR4: 0000000000340ea0
[   17.352584] Call Trace:
[   17.352586]  ? rev_id_show+0x8/0x8
[   17.352587]  ? __cfi_check+0x45bac/0x4b640
[   17.352589]  ? kobj_attr_show+0x73/0x80
[   17.352590]  ? sysfs_kf_seq_show+0xc1/0x140
[   17.352592]  ? ext4_seq_options_show.cfi_jt+0x8/0x8
[   17.352593]  ? seq_read+0x180/0x600
[   17.352595]  ? sysfs_create_file_ns.cfi_jt+0x10/0x10
[   17.352596]  ? tlbflush_read_file+0x8/0x8
[   17.352597]  ? __vfs_read+0x6b/0x220
[   17.352598]  ? handle_mm_fault+0xa23/0x11b0
[   17.352599]  ? vfs_read+0xa2/0x130
[   17.352599]  ? ksys_read+0x6a/0xd0
[   17.352601]  ? __do_sys_getpgrp+0x8/0x8
[   17.352602]  ? do_syscall_64+0x72/0x120
[   17.352603]  ? entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   17.352604] ---[ end trace 7b1fa81dc897e419 ]---

When /sys/firmware/acpi/pm_profile is read, sysfs_kf_seq_show is called,
which in turn calls kobj_attr_show, which gets the ->show callback
member by calling container_of on attr (casting it to struct
kobj_attribute) then calls it.

There is a CFI violation because pm_profile_attr is of type
struct device_attribute but kobj_attr_show calls ->show expecting it
to be from struct kobj_attribute. CFI checking ensures that function
pointer types match when doing indirect calls. Fix pm_profile_attr to
be defined in terms of kobj_attribute so there is no violation or
mismatch.

Fixes: 362b646062b2 ("ACPI: Export FADT pm_profile integer value to userspace")
Link: https://github.com/ClangBuiltLinux/linux/issues/1051
Reported-by: yuu ichii <byahu140@heisei.be>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Add quirk for MSI GE63 laptop

commit a0b03952a797591d4b6d6fa7b9b7872e27783729 upstream.

MSI GE63 laptop with ALC1220 codec requires the very same quirk
(ALC1220_FIXUP_CLEVO_P950) as other MSI devices for the proper sound
output.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208057
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200616132150.8778-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Add NVIDIA codec IDs 9a & 9d through a0 to patch table

commit adb36a8203831e40494a92095dacd566b2ad4a69 upstream.

These IDs are for upcoming NVIDIA chips with audio functions that are largely
similar to the existing ones.

Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200611180845.39942-1-aplattner@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RISC-V: Don't allow write+exec only page mapping request in mmap

[ Upstream commit e0d17c842c0f824fd4df9f4688709fc6907201e1 ]

As per the table 4.4 of version "20190608-Priv-MSU-Ratified" of the
RISC-V instruction set manual[0], the PTE permission bit combination of
"write+exec only" is reserved for future use. Hence, don't allow such
mapping request in mmap call.

An issue is been reported by David Abdurachmanov, that while running
stress-ng with "sysbadaddr" argument, RCU stalls are observed on RISC-V
specific kernel.

This issue arises when the stress-sysbadaddr request for pages with
"write+exec only" permission bits and then passes the address obtain
from this mmap call to various system call. For the riscv kernel, the
mmap call should fail for this particular combination of permission bits
since it's not valid.

[0]: http://dabbelt.com/~palmer/keep/riscv-isa-manual/riscv-privileged-20190608-1.pdf

Signed-off-by: Yash Shah <yash.shah@sifive.com>
Reported-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
[Palmer: Refer to the latest ISA specification at the only link I could
find, and update the terminology.]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blktrace: break out of blktrace setup on concurrent calls

[ Upstream commit 1b0b283648163dae2a214ca28ed5a99f62a77319 ]

We use one blktrace per request_queue, that means one per the entire
disk.  So we cannot run one blktrace on say /dev/vda and then /dev/vda1,
or just two calls on /dev/vda.

We check for concurrent setup only at the very end of the blktrace setup though.

If we try to run two concurrent blktraces on the same block device the
second one will fail, and the first one seems to go on. However when
one tries to kill the first one one will see things like this:

The kernel will show these:

```
debugfs: File 'dropped' in directory 'nvme1n1' already present!
debugfs: File 'msg' in directory 'nvme1n1' already present!
debugfs: File 'trace0' in directory 'nvme1n1' already present!
``

And userspace just sees this error message for the second call:

```
blktrace /dev/nvme1n1
BLKTRACESETUP(2) /dev/nvme1n1 failed: 5/Input/output error
```

The first userspace process #1 will also claim that the files
were taken underneath their nose as well. The files are taken
away form the first process given that when the second blktrace
fails, it will follow up with a BLKTRACESTOP and BLKTRACETEARDOWN.
This means that even if go-happy process #1 is waiting for blktrace
data, we *have* been asked to take teardown the blktrace.

This can easily be reproduced with break-blktrace [0] run_0005.sh test.

Just break out early if we know we're already going to fail, this will
prevent trying to create the files all over again, which we know still
exist.

[0] https://github.com/mcgrof/break-blktrace

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: improve cc-option to clean up all temporary files

[ Upstream commit f2f02ebd8f3833626642688b2d2c6a7b3c141fa9 ]

When cc-option and friends evaluate compiler flags, the temporary file
$$TMP is created as an output object, and automatically cleaned up.
The actual file path of $$TMP is .<pid>.tmp, here <pid> is the process
ID of $(shell ...) invoked from cc-option. (Please note $$$$ is the
escape sequence of $$).

Such garbage files are cleaned up in most cases, but some compiler flags
create additional output files.

For example, -gsplit-dwarf creates a .dwo file.

When CONFIG_DEBUG_INFO_SPLIT=y, you will see a bunch of .<pid>.dwo files
left in the top of build directories. You may not notice them unless you
do 'ls -a', but the garbage files will increase every time you run 'make'.

This commit changes the temporary object path to .tmp_<pid>/tmp, and
removes .tmp_<pid> directory when exiting. Separate build artifacts such
as *.dwo will be cleaned up all together because their file paths are
usually determined based on the base name of the object.

Another example is -ftest-coverage, which outputs the coverage data into
<base-name-of-object>.gcno

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: sve: Fix build failure when ARM64_SVE=y and SYSCTL=n

[ Upstream commit e575fb9e76c8e33440fb859572a8b7d430f053d6 ]

When I squashed the 'allnoconfig' compiler warning about the
set_sve_default_vl() function being defined but not used in commit
1e570f512cbd ("arm64/sve: Eliminate data races on sve_default_vl"), I
accidentally broke the build for configs where ARM64_SVE is enabled, but
SYSCTL is not.

Fix this by only compiling the SVE sysctl support if both CONFIG_SVE=y
and CONFIG_SYSCTL=y.

Cc: Dave Martin <Dave.Martin@arm.com>
Reported-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200616131808.GA1040@lca.pw
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/vdso: fix vDSO clock_getres()

[ Upstream commit 478237a595120a18e9b52fd2c57a6e8b7a01e411 ]

clock_getres in the vDSO library has to preserve the same behaviour
of posix_get_hrtimer_res().

In particular, posix_get_hrtimer_res() does:
    sec = 0;
    ns = hrtimer_resolution;
and hrtimer_resolution depends on the enablement of the high
resolution timers that can happen either at compile or at run time.

Fix the s390 vdso implementation of clock_getres keeping a copy of
hrtimer_resolution in vdso data and using that directly.

Link: https://lkml.kernel.org/r/20200324121027.21665-1-vincenzo.frascino@arm.com
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
[heiko.carstens@de.ibm.com: use llgf for proper zero extension]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/ptrace: fix setting syscall number

[ Upstream commit 873e5a763d604c32988c4a78913a8dab3862d2f9 ]

When strace wants to update the syscall number, it sets GPR2
to the desired number and updates the GPR via PTRACE_SETREGSET.
It doesn't update regs->int_code which would cause the old syscall
executed on syscall restart. As we cannot change the ptrace ABI and
don't have a field for the interruption code, check whether the tracee
is in a syscall and the last instruction was svc. In that case assume
that the tracer wants to update the syscall number and copy the GPR2
value to regs->int_code.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: alx: fix race condition in alx_remove

[ Upstream commit e89df5c4322c1bf495f62d74745895b5fd2a4393 ]

There is a race condition exist during termination. The path is
alx_stop and then alx_remove. An alx_schedule_link_check could be called
before alx_stop by interrupt handler and invoke alx_link_check later.
Alx_stop frees the napis, and alx_remove cancels any pending works.
If any of the work is scheduled before termination and invoked before
alx_remove, a null-ptr-deref occurs because both expect alx->napis[i].

This patch fix the race condition by moving cancel_work_sync functions
before alx_free_napis inside alx_stop. Because interrupt handler can call
alx_schedule_link_check again, alx_free_irq is moved before
cancel_work_sync calls too.

Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ibmvnic: Harden device login requests

[ Upstream commit dff515a3e71dc8ab3b9dcc2e23a9b5fca88b3c18 ]

The VNIC driver's "login" command sequence is the final step
in the driver's initialization process with device firmware,
confirming the available device queue resources to be utilized
by the driver. Under high system load, firmware may not respond
to the request in a timely manner or may abort the request. In
such cases, the driver should reattempt the login command
sequence. In case of a device error, the number of retries
is bounded.

Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwrng: ks-sa - Fix runtime PM imbalance on error

[ Upstream commit 95459261c99f1621d90bc628c2a48e60b7cf9a88 ]

pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv/atomic: Fix sign extension for RV64I

[ Upstream commit 6c58f25e6938c073198af8b1e1832f83f8f0df33 ]

The argument passed to cmpxchg is not guaranteed to be sign
extended, but lr.w sign extends on RV64I. This makes cmpxchg
fail on clang built kernels when __old is negative.

To fix this, we just cast __old to long which sign extends on
RV64I. With this fix, clang built RISC-V kernels now boot.

Link: https://github.com/ClangBuiltLinux/linux/issues/867
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Use kfree() to free rgb_user in calculate_user_regamma_ramp()

[ Upstream commit 43a562774fceba867e8eebba977d7d42f8a2eac7 ]

Use kfree() instead of kvfree() to free rgb_user in
calculate_user_regamma_ramp() because the memory is allocated with
kcalloc().

Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ata/libata: Fix usage of page address by page_address in ata_scsi_mode_select_xlat function

[ Upstream commit f650ef61e040bcb175dd8762164b00a5d627f20e ]

BUG: KASAN: use-after-free in ata_scsi_mode_select_xlat+0x10bd/0x10f0
drivers/ata/libata-scsi.c:4045
Read of size 1 at addr ffff88803b8cd003 by task syz-executor.6/12621

CPU: 1 PID: 12621 Comm: syz-executor.6 Not tainted 4.19.95 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xac/0xee lib/dump_stack.c:118
print_address_description+0x60/0x223 mm/kasan/report.c:253
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report mm/kasan/report.c:409 [inline]
kasan_report.cold+0xae/0x2d8 mm/kasan/report.c:393
ata_scsi_mode_select_xlat+0x10bd/0x10f0 drivers/ata/libata-scsi.c:4045
ata_scsi_translate+0x2da/0x680 drivers/ata/libata-scsi.c:2035
__ata_scsi_queuecmd drivers/ata/libata-scsi.c:4360 [inline]
ata_scsi_queuecmd+0x2e4/0x790 drivers/ata/libata-scsi.c:4409
scsi_dispatch_cmd+0x2ee/0x6c0 drivers/scsi/scsi_lib.c:1867
scsi_queue_rq+0xfd7/0x1990 drivers/scsi/scsi_lib.c:2170
blk_mq_dispatch_rq_list+0x1e1/0x19a0 block/blk-mq.c:1186
blk_mq_do_dispatch_sched+0x147/0x3d0 block/blk-mq-sched.c:108
blk_mq_sched_dispatch_requests+0x427/0x680 block/blk-mq-sched.c:204
__blk_mq_run_hw_queue+0xbc/0x200 block/blk-mq.c:1308
__blk_mq_delay_run_hw_queue+0x3c0/0x460 block/blk-mq.c:1376
blk_mq_run_hw_queue+0x152/0x310 block/blk-mq.c:1413
blk_mq_sched_insert_request+0x337/0x6c0 block/blk-mq-sched.c:397
blk_execute_rq_nowait+0x124/0x320 block/blk-exec.c:64
blk_execute_rq+0xc5/0x112 block/blk-exec.c:101
sg_scsi_ioctl+0x3b0/0x6a0 block/scsi_ioctl.c:507
sg_ioctl+0xd37/0x23f0 drivers/scsi/sg.c:1106
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:501 [inline]
do_vfs_ioctl+0xae6/0x1030 fs/ioctl.c:688
ksys_ioctl+0x76/0xa0 fs/ioctl.c:705
__do_sys_ioctl fs/ioctl.c:712 [inline]
__se_sys_ioctl fs/ioctl.c:710 [inline]
__x64_sys_ioctl+0x6f/0xb0 fs/ioctl.c:710
do_syscall_64+0xa0/0x2e0 arch/x86/entry/common.c:293
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45c479
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89
f7 48
89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f
83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fb0e9602c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fb0e96036d4 RCX: 000000000045c479
RDX: 0000000020000040 RSI: 0000000000000001 RDI: 0000000000000003
RBP: 000000000076bfc0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 000000000000046d R14: 00000000004c6e1a R15: 000000000076bfcc

Allocated by task 12577:
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc mm/kasan/kasan.c:553 [inline]
kasan_kmalloc+0xbf/0xe0 mm/kasan/kasan.c:531
__kmalloc+0xf3/0x1e0 mm/slub.c:3749
kmalloc include/linux/slab.h:520 [inline]
load_elf_phdrs+0x118/0x1b0 fs/binfmt_elf.c:441
load_elf_binary+0x2de/0x4610 fs/binfmt_elf.c:737
search_binary_handler fs/exec.c:1654 [inline]
search_binary_handler+0x15c/0x4e0 fs/exec.c:1632
exec_binprm fs/exec.c:1696 [inline]
__do_execve_file.isra.0+0xf52/0x1a90 fs/exec.c:1820
do_execveat_common fs/exec.c:1866 [inline]
do_execve fs/exec.c:1883 [inline]
__do_sys_execve fs/exec.c:1964 [inline]
__se_sys_execve fs/exec.c:1959 [inline]
__x64_sys_execve+0x8a/0xb0 fs/exec.c:1959
do_syscall_64+0xa0/0x2e0 arch/x86/entry/common.c:293
entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 12577:
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free+0x129/0x170 mm/kasan/kasan.c:521
slab_free_hook mm/slub.c:1370 [inline]
slab_free_freelist_hook mm/slub.c:1397 [inline]
slab_free mm/slub.c:2952 [inline]
kfree+0x8b/0x1a0 mm/slub.c:3904
load_elf_binary+0x1be7/0x4610 fs/binfmt_elf.c:1118
search_binary_handler fs/exec.c:1654 [inline]
search_binary_handler+0x15c/0x4e0 fs/exec.c:1632
exec_binprm fs/exec.c:1696 [inline]
__do_execve_file.isra.0+0xf52/0x1a90 fs/exec.c:1820
do_execveat_common fs/exec.c:1866 [inline]
do_execve fs/exec.c:1883 [inline]
__do_sys_execve fs/exec.c:1964 [inline]
__se_sys_execve fs/exec.c:1959 [inline]
__x64_sys_execve+0x8a/0xb0 fs/exec.c:1959
do_syscall_64+0xa0/0x2e0 arch/x86/entry/common.c:293
entry_SYSCALL_64_after_hwframe+0x44/0xa9

The buggy address belongs to the object at ffff88803b8ccf00
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 259 bytes inside of
512-byte region [ffff88803b8ccf00, ffff88803b8cd100)
The buggy address belongs to the page:
page:ffffea0000ee3300 count:1 mapcount:0 mapping:ffff88806cc03080
index:0xffff88803b8cc780 compound_mapcount: 0
flags: 0x100000000008100(slab|head)
raw: 0100000000008100 ffffea0001104080 0000000200000002 ffff88806cc03080
raw: ffff88803b8cc780 00000000800c000b 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff88803b8ccf00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88803b8ccf80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88803b8cd000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88803b8cd080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88803b8cd100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

You can refer to "https://www.lkml.org/lkml/2019/1/17/474" reproduce
this error.

The exception code is "bd_len = p[3];", "p" value is ffff88803b8cd000
which belongs to the cache kmalloc-512 of size 512. The "page_address(sg_page(scsi_sglist(scmd)))"
maybe from sg_scsi_ioctl function "buffer" which allocated by kzalloc, so "buffer"
may not page aligned.
This also looks completely buggy on highmem systems and really needs to use a
kmap_atomic.      --Christoph Hellwig
To address above bugs, Paolo Bonzini advise to simpler to just make a char array
of size CACHE_MPAGE_LEN+8+8+4-2(or just 64 to make it easy), use sg_copy_to_buffer
to copy from the sglist into the buffer, and workthere.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sata_rcar: handle pm_runtime_get_sync failure cases

[ Upstream commit eea1238867205b9e48a67c1a63219529a73c46fd ]

Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count. Call pm_runtime_put if
pm_runtime_get_sync fails.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/core: Fix PI boosting between RT and DEADLINE tasks

[ Upstream commit 740797ce3a124b7dd22b7fb832d87bc8fba1cf6f ]

syzbot reported the following warning:

 WARNING: CPU: 1 PID: 6351 at kernel/sched/deadline.c:628
 enqueue_task_dl+0x22da/0x38a0 kernel/sched/deadline.c:1504

At deadline.c:628 we have:

 623 static inline void setup_new_dl_entity(struct sched_dl_entity *dl_se)
 624 {
 625  struct dl_rq *dl_rq = dl_rq_of_se(dl_se);
 626  struct rq *rq = rq_of_dl_rq(dl_rq);
 627
 628  WARN_ON(dl_se->dl_boosted);
 629  WARN_ON(dl_time_before(rq_clock(rq), dl_se->deadline));
        [...]
     }

Which means that setup_new_dl_entity() has been called on a task
currently boosted. This shouldn't happen though, as setup_new_dl_entity()
is only called when the 'dynamic' deadline of the new entity
is in the past w.r.t. rq_clock and boosted tasks shouldn't verify this
condition.

Digging through the PI code I noticed that what above might in fact happen
if an RT tasks blocks on an rt_mutex hold by a DEADLINE task. In the
first branch of boosting conditions we check only if a pi_task 'dynamic'
deadline is earlier than mutex holder's and in this case we set mutex
holder to be dl_boosted. However, since RT 'dynamic' deadlines are only
initialized if such tasks get boosted at some point (or if they become
DEADLINE of course), in general RT 'dynamic' deadlines are usually equal
to 0 and this verifies the aforementioned condition.

Fix it by checking that the potential donor task is actually (even if
temporary because in turn boosted) running at DEADLINE priority before
using its 'dynamic' deadline value.

Fixes: 2d3d891d3344 ("sched/deadline: Add SCHED_DEADLINE inheritance logic")
Reported-by: syzbot+119ba87189432ead09b4@syzkaller.appspotmail.com
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Tested-by: Daniel Wagner <dwagner@suse.de>
Link: https://lkml.kernel.org/r/20181119153201.GB2119@localhost.localdomain
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/deadline: Initialize ->dl_boosted

[ Upstream commit ce9bc3b27f2a21a7969b41ffb04df8cf61bd1592 ]

syzbot reported the following warning triggered via SYSC_sched_setattr():

  WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 setup_new_dl_entity /kernel/sched/deadline.c:594 [inline]
  WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 enqueue_dl_entity /kernel/sched/deadline.c:1370 [inline]
  WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 enqueue_task_dl+0x1c17/0x2ba0 /kernel/sched/deadline.c:1441

This happens because the ->dl_boosted flag is currently not initialized by
__dl_clear_params() (unlike the other flags) and setup_new_dl_entity()
rightfully complains about it.

Initialize dl_boosted to 0.

Fixes: 2d3d891d3344 ("sched/deadline: Add SCHED_DEADLINE inheritance logic")
Reported-by: syzbot+5ac8bac25f95e8b221e7@syzkaller.appspotmail.com
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Daniel Wagner <dwagner@suse.de>
Link: https://lkml.kernel.org/r/20200617072919.818409-1-juri.lelli@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: core: check returned size of emulated smbus block read

[ Upstream commit 40e05200593af06633f64ab0effff052eee6f076 ]

If the i2c bus driver ignores the I2C_M_RECV_LEN flag (as some of
them do), it is possible for an I2C_SMBUS_BLOCK_DATA read issued
on some random device to return an arbitrary value in the first
byte (and nothing else).  When this happens, i2c_smbus_xfer_emulated()
will happily write past the end of the supplied data buffer, thus
causing Bad Things to happen.  To prevent this, check the size
before copying the data block and return an error if it is too large.

Fixes: 209d27c3b167 ("i2c: Emulate SMBus block read over I2C")
Signed-off-by: Mans Rullgard <mans@mansr.com>
[wsa: use better errno]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: fsi: Fix the port number field in status register

[ Upstream commit 502035e284cc7e9efef22b01771d822d49698ab9 ]

The port number field in the status register was not correct, so fix it.

Fixes: d6ffb6300116 ("i2c: Add FSI-attached I2C master algorithm")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bcmgenet: use hardware padding of runt frames

[ Upstream commit 20d1f2d1b024f6be199a3bedf1578a1d21592bc5 ]

When commit 474ea9cafc45 ("net: bcmgenet: correctly pad short
packets") added the call to skb_padto() it should have been
located before the nr_frags parameter was read since that value
could be changed when padding packets with lengths between 55
and 59 bytes (inclusive).

The use of a stale nr_frags value can cause corruption of the
pad data when tx-scatter-gather is enabled. This corruption of
the pad can cause invalid checksum computation when hardware
offload of tx-checksum is also enabled.

Since the original reason for the padding was corrected by
commit 7dd399130efb ("net: bcmgenet: fix skb_len in
bcmgenet_xmit_single()") we can remove the software padding all
together and make use of hardware padding of short frames as
long as the hardware also always appends the FCS value to the
frame.

Fixes: 474ea9cafc45 ("net: bcmgenet: correctly pad short packets")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ipset: fix unaligned atomic access

[ Upstream commit 715028460082d07a7ec6fcd87b14b46784346a72 ]

When using ip_set with counters and comment, traffic causes the kernel
to panic on 32-bit ARM:

Alignment trap: not handling instruction e1b82f9f at [<bf01b0dc>]
Unhandled fault: alignment exception (0x221) at 0xea08133c
PC is at ip_set_match_extensions+0xe0/0x224 [ip_set]

The problem occurs when we try to update the 64-bit counters - the
faulting address above is not 64-bit aligned.  The problem occurs
due to the way elements are allocated, for example:

set->dsize = ip_set_elem_len(set, tb, 0, 0);
map = ip_set_alloc(sizeof(*map) + elements * set->dsize);

If the element has a requirement for a member to be 64-bit aligned,
and set->dsize is not a multiple of 8, but is a multiple of four,
then every odd numbered elements will be misaligned - and hitting
an atomic64_add() on that element will cause the kernel to panic.

ip_set_elem_len() must return a size that is rounded to the maximum
alignment of any extension field stored in the element.  This change
ensures that is the case.

Fixes: 95ad1f4a9358 ("netfilter: ipset: Fix extension alignment")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: udc: Potential Oops in error handling code

[ Upstream commit e55f3c37cb8d31c7e301f46396b2ac6a19eb3a7c ]

If this is in "transceiver" mode the the ->qwork isn't required and is
a NULL pointer.  This can lead to a NULL dereference when we call
destroy_workqueue(udc->qwork).

Fixes: 3517c31a8ece ("usb: gadget: mv_udc: use devm_xxx for probe")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram()

[ Upstream commit 586745f1598ccf71b0a5a6df2222dee0a865954e ]

if of_find_device_by_node() succeed, imx_suspend_alloc_ocram() doesn't
have a corresponding put_device(). Thus add a jump target to fix the
exception handling for this function implementation.

Fixes: 1579c7b9fe01 ("ARM: imx53: Set DDR pins to high impedance when in suspend to RAM.")
Signed-off-by: yu kuai <yukuai3@huawei.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxgb4: move handling L2T ARP failures to caller

[ Upstream commit 11d8cd5c9f3b46f397f889cefdb66795518aaebd ]

Move code handling L2T ARP failures to the only caller.

Fixes following sparse warning:
skbuff.h:2091:29: warning: context imbalance in
'handle_failed_resolution' - unexpected unlock

Fixes: 749cb5fe48bb ("cxgb4: Replace arpq_head/arpq_tail with SKB double link-list code")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qed: fix excessive QM ILT lines consumption

[ Upstream commit d434d02f7e7c24c721365fd594ed781acb18e0da ]

This is likely a copy'n'paste mistake. The amount of ILT lines to
reserve for a single VF was being multiplied by the total VFs count.
This led to a huge redundancy in reservation and potential lines
drainouts.

Fixes: 1408cc1fa48c ("qed: Introduce VFs")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qed: fix NVMe login fails over VFs

[ Upstream commit ccd7c7ce167a21dbf2b698ffcf00f11d96d44f9b ]

25ms sleep cycles in waiting for PF response are excessive and may lead
to different timeout failures.

Start to wait with short udelays, and in most cases polling will end
here. If the time was not sufficient, switch to msleeps.
usleep_range() may go far beyond 100us depending on platform and tick
configuration, hence atomic udelays for consistency.

Also add explicit DMA barriers since 'done' always comes from a shared
request-response DMA pool, and note that in the comment nearby.

Fixes: 1408cc1fa48c ("qed: Introduce VFs")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qed: fix left elements count calculation

[ Upstream commit 97dd1abd026ae4e6a82fa68645928404ad483409 ]

qed_chain_get_element_left{,_u32} returned 0 when the difference
between producer and consumer page count was equal to the total
page count.
Fix this by conditional expanding of producer value (vs
unconditional). This allowed to eliminate normalizaton against
total page count, which was the cause of this bug.

Misc: replace open-coded constants with common defines.

Fixes: a91eb52abb50 ("qed: Revisit chain implementation")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/mad: Fix possible memory leak in ib_mad_post_receive_mads()

[ Upstream commit a17f4bed811c60712d8131883cdba11a105d0161 ]

If ib_dma_mapping_error() returns non-zero value,
ib_mad_post_receive_mads() will jump out of loops and return -ENOMEM
without freeing mad_priv. Fix this memory-leak problem by freeing mad_priv
in this case.

Fixes: 2c34e68f4261 ("IB/mad: Check and handle potential DMA mapping errors")
Link: https://lore.kernel.org/r/20200612063824.180611-1-guofan5@huawei.com
Signed-off-by: Fan Guo <guofan5@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rockchip: Fix a reference count leak.

[ Upstream commit f141a422159a199f4c8dedb7e0df55b3b2cf16cd ]

Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count if pm_runtime_put is not called in
error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails.

Fixes: fc05a5b22253 ("ASoC: rockchip: add support for pdm controller")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20200613205158.27296-1-wu000273@umn.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/cma: Protect bind_list and listen_list while finding matching cm id

[ Upstream commit 730c8912484186d4623d0c76509066d285c3a755 ]

The bind_list and listen_list must be accessed under a lock, add the
missing locking around the access in cm_ib_id_from_event()

In addition add lockdep asserts to make it clearer what the locking
semantic is here.

  general protection fault: 0000 [#1] SMP NOPTI
  CPU: 226 PID: 126135 Comm: kworker/226:1 Tainted: G OE 4.12.14-150.47-default #1 SLE15
  Hardware name: Cray Inc. Windom/Windom, BIOS 0.8.7 01-10-2020
  Workqueue: ib_cm cm_work_handler [ib_cm]
  task: ffff9c5a60a1d2c0 task.stack: ffffc1d91f554000
  RIP: 0010:cma_ib_req_handler+0x3f1/0x11b0 [rdma_cm]
  RSP: 0018:ffffc1d91f557b40 EFLAGS: 00010286
  RAX: deacffffffffff30 RBX: 0000000000000001 RCX: ffff9c2af5bb6000
  RDX: 00000000000000a9 RSI: ffff9c5aa4ed2f10 RDI: ffffc1d91f557b08
  RBP: ffffc1d91f557d90 R08: ffff9c340cc80000 R09: ffff9c2c0f901900
  R10: 0000000000000000 R11: 0000000000000001 R12: deacffffffffff30
  R13: ffff9c5a48aeec00 R14: ffffc1d91f557c30 R15: ffff9c5c2eea3688
  FS: 0000000000000000(0000) GS:ffff9c5c2fa80000(0000) knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00002b5cc03fa320 CR3: 0000003f8500a000 CR4: 00000000003406e0
  Call Trace:
  ? rdma_addr_cancel+0xa0/0xa0 [ib_core]
  ? cm_process_work+0x28/0x140 [ib_cm]
  cm_process_work+0x28/0x140 [ib_cm]
  ? cm_get_bth_pkey.isra.44+0x34/0xa0 [ib_cm]
  cm_work_handler+0xa06/0x1a6f [ib_cm]
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70
  ? __switch_to+0x7c/0x4b0
  ? __switch_to_asm+0x40/0x70
  ? __switch_to_asm+0x34/0x70
  process_one_work+0x1da/0x400
  worker_thread+0x2b/0x3f0
  ? process_one_work+0x400/0x400
  kthread+0x118/0x140
  ? kthread_create_on_node+0x40/0x40
  ret_from_fork+0x22/0x40
  Code: 00 66 83 f8 02 0f 84 ca 05 00 00 49 8b 84 24 d0 01 00 00 48 85 c0 0f 84 68 07 00 00 48 2d d0 01
  00 00 49 89 c4 0f 84 59 07 00 00 <41> 0f b7 44 24 20 49 8b 77 50 66 83 f8 0a 75 9e 49 8b 7c 24 28

Fixes: 4c21b5bcef73 ("IB/cma: Add net_dev and private data checks to RDMA CM")
Link: https://lore.kernel.org/r/20200616104304.2426081-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/qedr: Fix KASAN: use-after-free in ucma_event_handler+0x532

[ Upstream commit 0dfbd5ecf28cbcb81674c49d34ee97366db1be44 ]

Private data passed to iwarp_cm_handler is copied for connection request /
response, but ignored otherwise.  If junk is passed, it is stored in the
event and used later in the event processing.

The driver passes an old junk pointer during connection close which leads
to a use-after-free on event processing.  Set private data to NULL for
events that don 't have private data.

  BUG: KASAN: use-after-free in ucma_event_handler+0x532/0x560 [rdma_ucm]
  kernel: Read of size 4 at addr ffff8886caa71200 by task kworker/u128:1/5250
  kernel:
  kernel: Workqueue: iw_cm_wq cm_work_handler [iw_cm]
  kernel: Call Trace:
  kernel: dump_stack+0x8c/0xc0
  kernel: print_address_description.constprop.0+0x1b/0x210
  kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm]
  kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm]
  kernel: __kasan_report.cold+0x1a/0x33
  kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm]
  kernel: kasan_report+0xe/0x20
  kernel: check_memory_region+0x130/0x1a0
  kernel: memcpy+0x20/0x50
  kernel: ucma_event_handler+0x532/0x560 [rdma_ucm]
  kernel: ? __rpc_execute+0x608/0x620 [sunrpc]
  kernel: cma_iw_handler+0x212/0x330 [rdma_cm]
  kernel: ? iw_conn_req_handler+0x6e0/0x6e0 [rdma_cm]
  kernel: ? enqueue_timer+0x86/0x140
  kernel: ? _raw_write_lock_irq+0xd0/0xd0
  kernel: cm_work_handler+0xd3d/0x1070 [iw_cm]

Fixes: e411e0587e0d ("RDMA/qedr: Add iWARP connection management functions")
Link: https://lore.kernel.org/r/20200616093408.17827-1-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Fix handling of rwind from an ACK packet

[ Upstream commit a2ad7c21ad8cf1ce4ad65e13df1c2a1c29b38ac5 ]

The handling of the receive window size (rwind) from a received ACK packet
is not correct.  The rxrpc_input_ackinfo() function currently checks the
current Tx window size against the rwind from the ACK to see if it has
changed, but then limits the rwind size before storing it in the tx_winsize
member and, if it increased, wake up the transmitting process.  This means
that if rwind > RXRPC_RXTX_BUFF_SIZE - 1, this path will always be
followed.

Fix this by limiting rwind before we compare it to tx_winsize.

The effect of this can be seen by enabling the rxrpc_rx_rwind_change
tracepoint.

Fixes: 702f2ac87a9a ("rxrpc: Wake up the transmitter if Rx window size increases on the peer")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: NSP: Correct FA2 mailbox node

[ Upstream commit ac4e106d8934a5894811fc263f4b03fc8ed0fb7a ]

The FA2 mailbox is specified at 0x18025000 but should actually be
0x18025c00, length 0x400 according to socregs_nsp.h and board_bu.c. Also
the interrupt was off by one and should be GIC SPI 151 instead of 150.

Fixes: 17d517172300 ("ARM: dts: NSP: Add mailbox (PDC) to NSP")
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regmap: Fix memory leak from regmap_register_patch

[ Upstream commit 95b2c3ec4cb1689db2389c251d39f64490ba641c ]

When a register patch is registered the reg_sequence is copied but the
memory allocated is never freed. Add a kfree in regmap_exit to clean it
up.

Fixes: 22f0d90a3482 ("regmap: Support register patch sets")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200617152129.19655-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/resctrl: Fix a NULL vs IS_ERR() static checker warning in rdt_cdp_peer_get()

[ Upstream commit cc5277fe66cf3ad68f41f1c539b2ef0d5e432974 ]

The callers don't expect *d_cdp to be set to an error pointer, they only
check for NULL.  This leads to a static checker warning:

  arch/x86/kernel/cpu/resctrl/rdtgroup.c:2648 __init_one_rdt_domain()
  warn: 'd_cdp' could be an error pointer

This would not trigger a bug in this specific case because
__init_one_rdt_domain() calls it with a valid domain that would not have
a negative id and thus not trigger the return of the ERR_PTR(). If this
was a negative domain id then the call to rdt_find_domain() in
domain_add_cpu() would have returned the ERR_PTR() much earlier and the
creation of the domain with an invalid id would have been prevented.

Even though a bug is not triggered currently the right and safe thing to
do is to set the pointer to NULL because that is what can be checked for
when the caller is handling the CDP and non-CDP cases.

Fixes: 52eb74339a62 ("x86/resctrl: Fix rdt_find_domain() return value and checks")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lkml.kernel.org/r/20200602193611.GA190851@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Fix duovero smsc interrupt for suspend

[ Upstream commit 9cf28e41f9f768791f54ee18333239fda6927ed8 ]

While testing the recent suspend and resume regressions I noticed that
duovero can still end up losing edge gpio interrupts on runtime
suspend. This causes NFSroot easily stopping working after resume on
duovero.

Let's fix the issue by using gpio level interrupts for smsc as then
the gpio interrupt state is seen by the gpio controller on resume.

Fixes: 731b409878a3 ("ARM: dts: Configure duovero for to allow core retention during idle")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl_ssi: Fix bclk calculation for mono channel

[ Upstream commit ed1220df6e666500ebf58c4f2fccc681941646fb ]

For mono channel, SSI will switch to Normal mode.

In Normal mode and Network mode, the Word Length Control bits
control the word length divider in clock generator, which is
different with I2S Master mode (the word length is fixed to
32bit), it should be the value of params_width(hw_params).

The condition "slots == 2" is not good for I2S Master mode,
because for Network mode and Normal mode, the slots can also
be 2. Then we need to use (ssi->i2s_net & SSI_SCR_I2S_MODE_MASK)
to check if it is I2S Master mode.

So we refine the formula for mono channel, otherwise there
will be sound issue for S24_LE.

Fixes: b0a7043d5c2c ("ASoC: fsl_ssi: Caculate bit clock rate using slot number and width")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/034eff1435ff6ce300b6c781130cefd9db22ab9a.1592276147.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regualtor: pfuze100: correct sw1a/sw2 on pfuze3000

[ Upstream commit 6f1cf5257acc6e6242ddf2f52bc7912aed77b79f ]

PFUZE100_SWB_REG is not proper for sw1a/sw2, because enable_mask/enable_reg
is not correct. On PFUZE3000, sw1a/sw2 should be the same as sw1a/sw2 on
pfuze100 except that voltages are not linear, so add new PFUZE3000_SW_REG
and pfuze3000_sw_regulator_ops which like the non-linear PFUZE100_SW_REG
and pfuze100_sw_regulator_ops.

Fixes: 1dced996ee70 ("regulator: pfuze100: update voltage setting for pfuze3000 sw1a")
Reported-by: Christophe Meynard <Christophe.Meynard@ign.fr>
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Link: https://lore.kernel.org/r/1592171648-8752-1-git-send-email-yibin.gong@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi/esrt: Fix reference count leak in esre_create_sysfs_entry.

[ Upstream commit 4ddf4739be6e375116c375f0a68bf3893ffcee21 ]

kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object. Previous
commit "b8eb718348b8" fixed a similar problem.

Fixes: 0bb549052d33 ("efi: Add esrt support")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Link: https://lore.kernel.org/r/20200528183804.4497-1-wu000273@umn.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: q6asm: handle EOS correctly

[ Upstream commit 6476b60f32866be49d05e2e0163f337374c55b06 ]

Successful send of EOS command does not indicate that EOS is actually
finished, correct event to wait EOS is finished is EOS_RENDERED event.
EOS_RENDERED means that the DSP has finished processing all the buffers
for that particular session and stream.

This patch fixes EOS handling!

Fixes: 68fd8480bb7b ("ASoC: qdsp6: q6asm: Add support to audio stream apis")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200611124159.20742-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: Fix double ESP trailer insertion in IPsec crypto offload.

[ Upstream commit 94579ac3f6d0820adc83b5dc5358ead0158101e9 ]

During IPsec performance testing, we see bad ICMP checksum. The error packet
has duplicated ESP trailer due to double validate_xmit_xfrm calls. The first call
is from ip_output, but the packet cannot be sent because
netif_xmit_frozen_or_stopped is true and the packet gets dev_requeue_skb. The second
call is from NET_TX softirq. However after the first call, the packet already
has the ESP trailer.

Fix by marking the skb with XFRM_XMIT bit after the packet is handled by
validate_xmit_xfrm to avoid duplicate ESP trailer insertion.

Fixes: f6e27114a60a ("net: Add a xfrm validate function to validate_xmit_skb")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs/smb3: Fix data inconsistent when zero file range

[ Upstream commit 6b69040247e14b43419a520f841f2b3052833df9 ]

CIFS implements the fallocate(FALLOC_FL_ZERO_RANGE) with send SMB
ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the
remote file to zero, but local page cache not update, then the data
inconsistent with server, which leads the xfstest generic/008 failed.

So we need to remove the local page caches before send SMB
ioctl(FSCTL_SET_ZERO_DATA) to server. After next read, it will
re-cache it.

Fixes: 30175628bf7f5 ("[SMB3] Enable fallocate -z support for SMB3 mounts")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Cc: stable@vger.kernel.org # v3.17
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs/smb3: Fix data inconsistent when punch hole

[ Upstream commit acc91c2d8de4ef46ed751c5f9df99ed9a109b100 ]

When punch hole success, we also can read old data from file:
  # strace -e trace=pread64,fallocate xfs_io -f -c "pread 20 40" \
           -c "fpunch 20 40" -c"pread 20 40" file
  pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40
  fallocate(3, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 20, 40) = 0
  pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40

CIFS implements the fallocate(FALLOCATE_FL_PUNCH_HOLE) with send SMB
ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the
remote file to zero, but local page caches not updated, then the
local page caches inconsistent with server.

Also can be found by xfstests generic/316.

So, we need to remove the page caches before send the SMB
ioctl(FSCTL_SET_ZERO_DATA) to server.

Fixes: 31742c5a33176 ("enable fallocate punch hole ("fallocate -p") for SMB3")
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Cc: stable@vger.kernel.org # v3.17
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mad: Fix use after free when destroying MAD agent

commit 116a1b9f1cb769b83e5adff323f977a62b1dcb2e upstream.

Currently, when RMPP MADs are processed while the MAD agent is destroyed,
it could result in use after free of rmpp_recv, as decribed below:

cpu-0 cpu-1
----- -----
ib_mad_recv_done()
 ib_mad_complete_recv()
  ib_process_rmpp_recv_wc()
unregister_mad_agent()
 ib_cancel_rmpp_recvs()
  cancel_delayed_work()
   process_rmpp_data()
    start_rmpp()
     queue_delayed_work(rmpp_recv->cleanup_work)
  destroy_rmpp_recv()
   free_rmpp_recv()
     cleanup_work()[1]
      spin_lock_irqsave(&rmpp_recv->agent->lock) <-- use after free

[1] cleanup_work() == recv_cleanup_handler

Fix it by waiting for the MAD agent reference count becoming zero before
calling to ib_cancel_rmpp_recvs().

Fixes: 9a41e38a467c ("IB/mad: Use IDR for agent IDs")
Link: https://lore.kernel.org/r/20200621104738.54850-2-leon@kernel.org
Signed-off-by: Shay Drory <shayd@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: replace kill_bdev with invalidate_bdev

commit f4bd34b139a3fa2808c4205f12714c65e1548c6c upstream.

When a filesystem is mounted on a loop device and on a loop ioctl
LOOP_SET_STATUS64, because of kill_bdev, buffer_head mappings are getting
destroyed.
kill_bdev
  truncate_inode_pages
    truncate_inode_pages_range
      do_invalidatepage
        block_invalidatepage
          discard_buffer  -->clear BH_Mapped flag

sb_bread
  __bread_gfp
  bh = __getblk_gfp
  -->discard_buffer clear BH_Mapped flag
  __bread_slow
    submit_bh
      submit_bh_wbc
        BUG_ON(!buffer_mapped(bh))  --> hit this BUG_ON

Fixes: 5db470e229e2 ("loop: drop caches if offset or block_size are changed")
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cdc-acm: Add DISABLE_ECHO quirk for Microchip/SMSC chip

commit 03894573f2913181ee5aae0089f333b2131f2d4b upstream.

USB_DEVICE(0x0424, 0x274e) can send data before cdc_acm is ready,
causing garbage chars on the TTY causing stray input to the shell
and/or login prompt.

Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Cc: stable@vger.kernel.org
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20200605105418.22263-1-joakim.tjernlund@infinera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Return if xHCI doesn't support LPM

commit f0c472a6da51f9fac15e80fe2fd9c83b68754cff upstream.

Just return if xHCI is quirked to disable LPM. We can save some time
from reading registers and doing spinlocks.

Add stable tag as we want this patch together with the next one,
"Poll for U0 after disabling USB2 LPM" which fixes a suspend issue
for some USB2 LPM devices

Cc: stable@vger.kernel.org
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200624135949.22611-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Fix enumeration issue when setting max packet size for FS devices.

commit a73d9d9cfc3cfceabd91fb0b0c13e4062b6dbcd7 upstream.

Unable to complete the enumeration of a USB TV Tuner device.

Per XHCI spec (4.6.5), the EP state field of the input context shall
be cleared for a set address command. In the special case of an FS
device that has "MaxPacketSize0 = 8", the Linux XHCI driver does
not do this before evaluating the context. With an XHCI controller
that checks the EP state field for parameter context error this
causes a problem in cases such as the device getting reset again
after enumeration.

When that field is cleared, the problem does not occur.

This was found and fixed by Sasi Kumar.

Cc: stable@vger.kernel.org
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200624135949.22611-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Fix incorrect EP_STATE_MASK

commit dceea67058fe22075db3aed62d5cb62092be5053 upstream.

EP_STATE_MASK should be 0x7 instead of 0xf

xhci spec 6.2.3 shows that the EP state field in the endpoint context data
structure consist of bits [2:0].
The old value included a bit from the next field which fortunately is a
 RsvdZ region. So hopefully this hasn't caused too much harm

Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200624135949.22611-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP action

commit 936e6b85da0476dd2edac7c51c68072da9fb4ba2 upstream.

Suppose that, for unrelated reasons, FSF requests on behalf of recovery are
very slow and can run into the ERP timeout.

In the case at hand, we did adapter recovery to a large degree.  However
due to the slowness a LUN open is pending so the corresponding fc_rport
remains blocked.  After fast_io_fail_tmo we trigger close physical port
recovery for the port under which the LUN should have been opened.  The new
higher order port recovery dismisses the pending LUN open ERP action and
dismisses the pending LUN open FSF request.  Such dismissal decouples the
ERP action from the pending corresponding FSF request by setting
zfcp_fsf_req->erp_action to NULL (among other things)
[zfcp_erp_strategy_check_fsfreq()].

If now the ERP timeout for the pending open LUN request runs out, we must
not use zfcp_fsf_req->erp_action in the ERP timeout handler.  This is a
problem since v4.15 commit 75492a51568b ("s390/scsi: Convert timers to use
timer_setup()"). Before that we intentionally only passed zfcp_erp_action
as context argument to zfcp_erp_timeout_handler().

Note: The lifetime of the corresponding zfcp_fsf_req object continues until
a (late) response or an (unrelated) adapter recovery.

Just like the regular response path ignores dismissed requests
[zfcp_fsf_req_complete() => zfcp_fsf_protstatus_eval() => return early] the
ERP timeout handler now needs to ignore dismissed requests.  So simply
return early in the ERP timeout handler if the FSF request is marked as
dismissed in its status flags.  To protect against the race where
zfcp_erp_strategy_check_fsfreq() dismisses and sets
zfcp_fsf_req->erp_action to NULL after our previous status flag check,
return early if zfcp_fsf_req->erp_action is NULL.  After all, the former
ERP action does not need to be woken up as that was already done as part of
the dismissal above [zfcp_erp_action_dismiss()].

This fixes the following panic due to kernel page fault in IRQ context:

Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0000000000000000 TEID: 0000000000000483
Fault in home space mode while using kernel ASCE.
AS:000009859238c00b R2:00000e3e7ffd000b R3:00000e3e7ffcc007 S:00000e3e7ffd7000 P:000000000000013d
Oops: 0004 ilc:2 [#1] SMP
Modules linked in: ...
CPU: 82 PID: 311273 Comm: stress Kdump: loaded Tainted: G            E  X   ...
Hardware name: IBM 8561 T01 701 (LPAR)
Krnl PSW : 0404c00180000000 001fffff80549be0 (zfcp_erp_notify+0x40/0xc0 [zfcp])
           R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
Krnl GPRS: 0000000000000080 00000e3d00000000 00000000000000f0 0000000000030000
           000000010028e700 000000000400a39c 000000010028e700 00000e3e7cf87e02
           0000000010000000 0700098591cb67f0 0000000000000000 0000000000000000
           0000033840e9a000 0000000000000000 001fffe008d6bc18 001fffe008d6bbc8
Krnl Code: 001fffff80549bd4: a7180000            lhi     %r1,0
           001fffff80549bd8: 4120a0f0            la      %r2,240(%r10)
          #001fffff80549bdc: a53e0003            llilh   %r3,3
          >001fffff80549be0: ba132000            cs      %r1,%r3,0(%r2)
           001fffff80549be4: a7740037            brc     7,1fffff80549c52
           001fffff80549be8: e320b0180004        lg      %r2,24(%r11)
           001fffff80549bee: e31020e00004        lg      %r1,224(%r2)
           001fffff80549bf4: 412020e0            la      %r2,224(%r2)
Call Trace:
 [<001fffff80549be0>] zfcp_erp_notify+0x40/0xc0 [zfcp]
 [<00000985915e26f0>] call_timer_fn+0x38/0x190
 [<00000985915e2944>] expire_timers+0xfc/0x190
 [<00000985915e2ac4>] run_timer_softirq+0xec/0x218
 [<0000098591ca7c4c>] __do_softirq+0x144/0x398
 [<00000985915110aa>] do_softirq_own_stack+0x72/0x88
 [<0000098591551b58>] irq_exit+0xb0/0xb8
 [<0000098591510c6a>] do_IRQ+0x82/0xb0
 [<0000098591ca7140>] ext_int_handler+0x128/0x12c
 [<0000098591722d98>] clear_subpage.constprop.13+0x38/0x60
([<000009859172ae4c>] clear_huge_page+0xec/0x250)
 [<000009859177e7a2>] do_huge_pmd_anonymous_page+0x32a/0x768
 [<000009859172a712>] __handle_mm_fault+0x88a/0x900
 [<000009859172a860>] handle_mm_fault+0xd8/0x1b0
 [<0000098591529ef6>] do_dat_exception+0x136/0x3e8
 [<0000098591ca6d34>] pgm_check_handler+0x1c8/0x220
Last Breaking-Event-Address:
 [<001fffff80549c88>] zfcp_erp_timeout_handler+0x10/0x18 [zfcp]
Kernel panic - not syncing: Fatal exception in interrupt

Link: https://lore.kernel.org/r/20200623140242.98864-1-maier@linux.ibm.com
Fixes: 75492a51568b ("s390/scsi: Convert timers to use timer_setup()")
Cc: <stable@vger.kernel.org> #4.15+
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix OOB access of mixer element list

commit 220345e98f1cdc768eeb6e3364a0fa7ab9647fe7 upstream.

The USB-audio mixer code holds a linked list of usb_mixer_elem_list,
and several operations are performed for each mixer element.  A few of
them (snd_usb_mixer_notify_id() and snd_usb_mixer_interrupt_v2())
assume each mixer element being a usb_mixer_elem_info object that is a
subclass of usb_mixer_elem_list, cast via container_of() and access it
members.  This may result in an out-of-bound access when a
non-standard list element has been added, as spotted by syzkaller
recently.

This patch adds a new field, is_std_info, in usb_mixer_elem_list to
indicate that the element is the usb_mixer_elem_info type or not, and
skip the access to such an element if needed.

Reported-by: syzbot+fb14314433463ad51625@syzkaller.appspotmail.com
Reported-by: syzbot+2405ca3401e943c538b5@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200624122340.9615-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: add quirk for Samsung USBC Headset (AKG)

commit a32a1fc99807244d920d274adc46ba04b538cc8a upstream.

We've found Samsung USBC Headset (AKG) (VID: 0x04e8, PID: 0xa051)
need a tiny delay after each class compliant request.
Otherwise the device might not be able to be recognized each times.

Signed-off-by: Chihhao Chen <chihhao.chen@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1592910203-24035-1-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: add quirk for Denon DCD-1500RE

commit c9808bbfed3cfc911ecb60fe8e80c0c27876c657 upstream.

fix error "clock source 41 is not valid, cannot use"

[] New USB device found, idVendor=154e, idProduct=1002, bcdDevice= 1.00
[] New USB device strings: Mfr=1, Product=2, SerialNumber=0
[] Product: DCD-1500RE
[] Manufacturer: D & M Holdings Inc.
[]
[] clock source 41 is not valid, cannot use
[] usbcore: registered new interface driver snd-usb-audio

Signed-off-by: Yick W. Tse <y_w_tse@yahoo.com.hk>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1373857985.210365.1592048406997@mail.yahoo.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs

commit 302c570bf36e997d55ad0d60628a2feec76954a4 upstream.

John reported screaming irq caused by rt1711h when system boot[1],
this is because irq request is done before tcpci_register_port(),
so the chip->tcpci has not been setup, irq handler is entered but
can't do anything, this patch is to address this by moving the irq
request after tcpci_register_port().

[1] https://lore.kernel.org/linux-usb/20200530040157.31038-1-john.stultz@linaro.org

Fixes: ce08eaeb6388 ("staging: typec: rt1711h typec chip driver")
Cc: stable <stable@vger.kernel.org> # v4.18+
Cc: John Stultz <john.stultz@linaro.org>
Reported-and-tested-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/20200604112118.38062-1-jun.li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: ehci-exynos: Fix error check in exynos_ehci_probe()

commit 44ed240d62736ad29943ec01e41e194b96f7c5e9 upstream.

If the function platform_get_irq() failed, the negative value
returned will not be detected here. So fix error handling in
exynos_ehci_probe(). And when get irq failed, the function
platform_get_irq() logs an error message, so remove redundant
message here.

Fixes: 1bcc5aa87f04 ("USB: Add initial S5P EHCI driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200602114708.28620-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Poll for U0 after disabling USB2 LPM

commit b3d71abd135e6919ca0b6cab463738472653ddfb upstream.

USB2 devices with LPM enabled may interrupt the system suspend:
[  932.510475] usb 1-7: usb suspend, wakeup 0
[  932.510549] hub 1-0:1.0: hub_suspend
[  932.510581] usb usb1: bus suspend, wakeup 0
[  932.510590] xhci_hcd 0000:00:14.0: port 9 not suspended
[  932.510593] xhci_hcd 0000:00:14.0: port 8 not suspended
..
[  932.520323] xhci_hcd 0000:00:14.0: Port change event, 1-7, id 7, portsc: 0x400e03
..
[  932.591405] PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -16
[  932.591414] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -16
[  932.591418] PM: Device 0000:00:14.0 failed to suspend async: error -16

During system suspend, USB core will let HC suspends the device if it
doesn't have remote wakeup enabled and doesn't have any children.
However, from the log above we can see that the usb 1-7 doesn't get bus
suspended due to not in U0. After a while the port finished U2 -> U0
transition, interrupts the suspend process.

The observation is that after disabling LPM, port doesn't transit to U0
immediately and can linger in U2. xHCI spec 4.23.5.2 states that the
maximum exit latency for USB2 LPM should be BESL + 10us. The BESL for
the affected device is advertised as 400us, which is still not enough
based on my testing result.

So let's use the maximum permitted latency, 10000, to poll for U0
status to solve the issue.

Cc: stable@vger.kernel.org
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200624135949.22611-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci-mtk: avoid runtime suspend when removing hcd

commit a24d5072e87457a14023ee1dd3fc8b1e76f899ef upstream.

When runtime suspend was enabled, runtime suspend might happen
when xhci is removing hcd. This might cause kernel panic when hcd
has been freed but runtime pm suspend related handle need to
reference it.

Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200624135949.22611-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: ehci: reopen solution for Synopsys HC bug

commit 1ddcb71a3edf0e1682b6e056158e4c4b00325f66 upstream.

A Synopsys USB2.0 core used in Huawei Kunpeng920 SoC has a bug which
might cause the host controller not issuing ping.

Bug description:
After indicating an Interrupt on Async Advance, the software uses the
doorbell mechanism to delete the Next Link queue head of the last
executed queue head. At this time, the host controller still references
the removed queue head(the queue head is NULL). NULL reference causes
the host controller to lose the USB device.

Solution:
After deleting the Next Link queue head, when has_synopsys_hc_bug set
to 1，the software can write one of the valid queue head addresses to
the ASYNCLISTADDR register to allow the host controller to get
the valid queue head. in order to solve that problem, this patch set
the flag for Huawei Kunpeng920

There are detailed instructions and solutions in this patch:
commit 2f7ac6c19997 ("USB: ehci: add workaround for Synopsys HC bug")

Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/1591588019-44284-1-git-send-email-liulongfang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: add USB_QUIRK_DELAY_INIT for Logitech C922

commit 5d8021923e8a8cc37a421a64e27c7221f0fee33c upstream.

The Logitech C922, just like other Logitech webcams,
needs the USB_QUIRK_DELAY_INIT or it will randomly
not respond after device connection

Signed-off-by: Tomasz Meresiński <tomasz@meresinski.eu>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200603203347.7792-1-tomasz@meresinski.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: Postponed gadget registration to the udc class driver

commit 207324a321a866401b098cadf19e4a2dd6584622 upstream.

During dwc2 driver probe, after gadget registration to the udc class
driver, if exist any builtin function driver it immediately bound to
dwc2 and after init host side (dwc2_hcd_init()) stucked in host mode.
Patch postpone gadget registration after host side initialization done.

Fixes: 117777b2c3bb9 ("usb: dwc2: Move gadget probe function into platform code")
Reported-by: kbuild test robot <lkp@intel.com>
Tested-by: Marek Vasut <marex@denx.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Link: https://lore.kernel.org/r/f21cb38fecc72a230b86155d94c7e60c9cb66f58.1591690938.git.hminas@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: ohci-sm501: Add missed iounmap() in remove

commit 07c112fb09c86c0231f6ff0061a000ffe91c8eb9 upstream.

This driver misses calling iounmap() in remove to undo the ioremap()
called in probe.
Add the missed call to fix it.

Fixes: f54aab6ebcec ("usb: ohci-sm501 driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200610024844.3628408-1-hslester96@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: core: reduce recursion limit value

[ Upstream commit fb7861d14c8d7edac65b2fcb6e8031cb138457b2 ]

In the current code, ->ndo_start_xmit() can be executed recursively only
10 times because of stack memory.
But, in the case of the vxlan, 10 recursion limit value results in
a stack overflow.
In the current code, the nested interface is limited by 8 depth.
There is no critical reason that the recursion limitation value should
be 10.
So, it would be good to be the same value with the limitation value of
nesting interface depth.

Test commands:
    ip link add vxlan10 type vxlan vni 10 dstport 4789 srcport 4789 4789
    ip link set vxlan10 up
    ip a a 192.168.10.1/24 dev vxlan10
    ip n a 192.168.10.2 dev vxlan10 lladdr fc:22:33:44:55:66 nud permanent

    for i in {9..0}
    do
        let A=$i+1
ip link add vxlan$i type vxlan vni $i dstport 4789 srcport 4789 4789
ip link set vxlan$i up
ip a a 192.168.$i.1/24 dev vxlan$i
ip n a 192.168.$i.2 dev vxlan$i lladdr fc:22:33:44:55:66 nud permanent
bridge fdb add fc:22:33:44:55:66 dev vxlan$A dst 192.168.$i.2 self
    done
    hping3 192.168.10.2 -2 -d 60000

Splat looks like:
[  103.814237][ T1127] =============================================================================
[  103.871955][ T1127] BUG kmalloc-2k (Tainted: G    B            ): Padding overwritten. 0x00000000897a2e4f-0x000
[  103.873187][ T1127] -----------------------------------------------------------------------------
[  103.873187][ T1127]
[  103.874252][ T1127] INFO: Slab 0x000000005cccc724 objects=5 used=5 fp=0x0000000000000000 flags=0x10000000001020
[  103.881323][ T1127] CPU: 3 PID: 1127 Comm: hping3 Tainted: G    B             5.7.0+ #575
[  103.882131][ T1127] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  103.883006][ T1127] Call Trace:
[  103.883324][ T1127]  dump_stack+0x96/0xdb
[  103.883716][ T1127]  slab_err+0xad/0xd0
[  103.884106][ T1127]  ? _raw_spin_unlock+0x1f/0x30
[  103.884620][ T1127]  ? get_partial_node.isra.78+0x140/0x360
[  103.885214][ T1127]  slab_pad_check.part.53+0xf7/0x160
[  103.885769][ T1127]  ? pskb_expand_head+0x110/0xe10
[  103.886316][ T1127]  check_slab+0x97/0xb0
[  103.886763][ T1127]  alloc_debug_processing+0x84/0x1a0
[  103.887308][ T1127]  ___slab_alloc+0x5a5/0x630
[  103.887765][ T1127]  ? pskb_expand_head+0x110/0xe10
[  103.888265][ T1127]  ? lock_downgrade+0x730/0x730
[  103.888762][ T1127]  ? pskb_expand_head+0x110/0xe10
[  103.889244][ T1127]  ? __slab_alloc+0x3e/0x80
[  103.889675][ T1127]  __slab_alloc+0x3e/0x80
[  103.890108][ T1127]  __kmalloc_node_track_caller+0xc7/0x420
[ ... ]

Fixes: 11a766ce915f ("net: Increase xmit RECURSION_LIMIT to 10.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: Do not clear the sock TX queue in sk_set_socket()

[ Upstream commit 41b14fb8724d5a4b382a63cb4a1a61880347ccb8 ]

Clearing the sock TX queue in sk_set_socket() might cause unexpected
out-of-order transmit when called from sock_orphan(), as outstanding
packets can pick a different TX queue and bypass the ones already queued.

This is undesired in general. More specifically, it breaks the in-order
scheduling property guarantee for device-offloaded TLS sockets.

Remove the call to sk_tx_queue_clear() in sk_set_socket(), and add it
explicitly only where needed.

Fixes: e022f0b4a03f ("net: Introduce sk_tx_queue_mapping")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: Fix the arp error in some cases

[ Upstream commit 5eea3a63ff4aba6a26002e657a6d21934b7e2b96 ]

ie.,
$ ifconfig eth0 6.6.6.6 netmask 255.255.255.0

$ ip rule add from 6.6.6.6 table 6666

$ ip route add 9.9.9.9 via 6.6.6.6

$ ping -I 6.6.6.6 9.9.9.9
PING 9.9.9.9 (9.9.9.9) from 6.6.6.6 : 56(84) bytes of data.

3 packets transmitted, 0 received, 100% packet loss, time 2079ms

$ arp
Address     HWtype  HWaddress           Flags Mask            Iface
6.6.6.6             (incomplete)                              eth0

The arp request address is error, this is because fib_table_lookup in
fib_check_nh lookup the destnation 9.9.9.9 nexthop, the scope of
the fib result is RT_SCOPE_LINK,the correct scope is RT_SCOPE_HOST.
Here I add a check of whether this is RT_TABLE_MAIN to solve this problem.

Fixes: 3bfd847203c6 ("net: Use passed in table for nexthop lookups")
Signed-off-by: guodeqing <geffrey.guo@huawei.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sch_cake: don't call diffserv parsing code when it is not needed

[ Upstream commit 8c95eca0bb8c4bd2231a0d581f1ad0d50c90488c ]

As a further optimisation of the diffserv parsing codepath, we can skip it
entirely if CAKE is configured to neither use diffserv-based
classification, nor to zero out the diffserv bits.

Fixes: c87b4ecdbe8d ("sch_cake: Make sure we can write the IP header before changing DSCP bits")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT

[ Upstream commit b344579ca8478598937215f7005d6c7b84d28aee ]

Mirja Kuehlewind reported a bug in Linux TCP CUBIC Hystart, where
Hystart HYSTART_DELAY mechanism can exit Slow Start spuriously on an
ACK when the minimum rtt of a connection goes down. From inspection it
is clear from the existing code that this could happen in an example
like the following:

o The first 8 RTT samples in a round trip are 150ms, resulting in a
  curr_rtt of 150ms and a delay_min of 150ms.

o The 9th RTT sample is 100ms. The curr_rtt does not change after the
  first 8 samples, so curr_rtt remains 150ms. But delay_min can be
  lowered at any time, so delay_min falls to 100ms. The code executes
  the HYSTART_DELAY comparison between curr_rtt of 150ms and delay_min
  of 100ms, and the curr_rtt is declared far enough above delay_min to
  force a (spurious) exit of Slow start.

The fix here is simple: allow every RTT sample in a round trip to
lower the curr_rtt.

Fixes: ae27e98a5152 ("[TCP] CUBIC v2.3")
Reported-by: Mirja Kuehlewind <mirja.kuehlewind@ericsson.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sch_cake: fix a few style nits

[ Upstream commit 3f608f0c41360b11b04c763f348b712f651c8bac ]

I spotted a few nits when comparing the in-tree version of sch_cake with
the out-of-tree one: A redundant error variable declaration shadowing an
outer declaration, and an indentation alignment issue. Fix both of these.

Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sch_cake: don't try to reallocate or unshare skb unconditionally

[ Upstream commit 9208d2863ac689a563b92f2161d8d1e7127d0add ]

cake_handle_diffserv() tries to linearize mac and network header parts of
skb and to make it writable unconditionally. In some cases it leads to full
skb reallocation, which reduces throughput and increases CPU load. Some
measurements of IPv4 forward + NAPT on MIPS router with 580 MHz single-core
CPU was conducted. It appears that on kernel 4.9 skb_try_make_writable()
reallocates skb, if skb was allocated in ethernet driver via so-called
'build skb' method from page cache (it was discovered by strange increase
of kmalloc-2048 slab at first).

Obtain DSCP value via read-only skb_header_pointer() call, and leave
linearization only for DSCP bleaching or ECN CE setting. And, as an
additional optimisation, skip diffserv parsing entirely if it is not needed
by the current configuration.

Fixes: c87b4ecdbe8d ("sch_cake: Make sure we can write the IP header before changing DSCP bits")
Signed-off-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com>
[ fix a few style issues, reflow commit message ]
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip_tunnel: fix use-after-free in ip_tunnel_lookup()

[ Upstream commit ba61539c6ae57f4146284a5cb4f7b7ed8d42bf45 ]

In the datapath, the ip_tunnel_lookup() is used and it internally uses
fallback tunnel device pointer, which is fb_tunnel_dev.
This pointer variable should be set to NULL when a fb interface is deleted.
But there is no routine to set fb_tunnel_dev pointer to NULL.
So, this pointer will be still used after interface is deleted and
it eventually results in the use-after-free problem.

Test commands:
    ip netns add A
    ip netns add B
    ip link add eth0 type veth peer name eth1
    ip link set eth0 netns A
    ip link set eth1 netns B

    ip netns exec A ip link set lo up
    ip netns exec A ip link set eth0 up
    ip netns exec A ip link add gre1 type gre local 10.0.0.1 \
    remote 10.0.0.2
    ip netns exec A ip link set gre1 up
    ip netns exec A ip a a 10.0.100.1/24 dev gre1
    ip netns exec A ip a a 10.0.0.1/24 dev eth0

    ip netns exec B ip link set lo up
    ip netns exec B ip link set eth1 up
    ip netns exec B ip link add gre1 type gre local 10.0.0.2 \
    remote 10.0.0.1
    ip netns exec B ip link set gre1 up
    ip netns exec B ip a a 10.0.100.2/24 dev gre1
    ip netns exec B ip a a 10.0.0.2/24 dev eth1
    ip netns exec A hping3 10.0.100.2 -2 --flood -d 60000 &
    ip netns del B

Splat looks like:
[   77.793450][    C3] ==================================================================
[   77.794702][    C3] BUG: KASAN: use-after-free in ip_tunnel_lookup+0xcc4/0xf30
[   77.795573][    C3] Read of size 4 at addr ffff888060bd9c84 by task hping3/2905
[   77.796398][    C3]
[   77.796664][    C3] CPU: 3 PID: 2905 Comm: hping3 Not tainted 5.8.0-rc1+ #616
[   77.797474][    C3] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   77.798453][    C3] Call Trace:
[   77.798815][    C3]  <IRQ>
[   77.799142][    C3]  dump_stack+0x9d/0xdb
[   77.799605][    C3]  print_address_description.constprop.7+0x2cc/0x450
[   77.800365][    C3]  ? ip_tunnel_lookup+0xcc4/0xf30
[   77.800908][    C3]  ? ip_tunnel_lookup+0xcc4/0xf30
[   77.801517][    C3]  ? ip_tunnel_lookup+0xcc4/0xf30
[   77.802145][    C3]  kasan_report+0x154/0x190
[   77.802821][    C3]  ? ip_tunnel_lookup+0xcc4/0xf30
[   77.803503][    C3]  ip_tunnel_lookup+0xcc4/0xf30
[   77.804165][    C3]  __ipgre_rcv+0x1ab/0xaa0 [ip_gre]
[   77.804862][    C3]  ? rcu_read_lock_sched_held+0xc0/0xc0
[   77.805621][    C3]  gre_rcv+0x304/0x1910 [ip_gre]
[   77.806293][    C3]  ? lock_acquire+0x1a9/0x870
[   77.806925][    C3]  ? gre_rcv+0xfe/0x354 [gre]
[   77.807559][    C3]  ? erspan_xmit+0x2e60/0x2e60 [ip_gre]
[   77.808305][    C3]  ? rcu_read_lock_sched_held+0xc0/0xc0
[   77.809032][    C3]  ? rcu_read_lock_held+0x90/0xa0
[   77.809713][    C3]  gre_rcv+0x1b8/0x354 [gre]
[ ... ]

Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: Check harder for errors in get_phy_id()

[ Upstream commit b2ffc75e2e990b09903f9d15ccd53bc5f3a4217c ]

Commit 02a6efcab675 ("net: phy: allow scanning busses with missing
phys") added a special condition to return -ENODEV in case -ENODEV or
-EIO was returned from the first read of the MII_PHYSID1 register.

In case the MDIO bus data line pull-up is not strong enough, the MDIO
bus controller will not flag this as a read error. This can happen when
a pluggable daughter card is not connected and weak internal pull-ups
are used (since that is the only option, otherwise the pins are
floating).

The second read of MII_PHYSID2 will be correctly flagged an error
though, but now we will return -EIO which will be treated as a hard
error, thus preventing MDIO bus scanning loops to continue succesfully.

Apply the same logic to both register reads, thus allowing the scanning
logic to proceed.

Fixes: 02a6efcab675 ("net: phy: allow scanning busses with missing phys")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip6_gre: fix use-after-free in ip6gre_tunnel_lookup()

[ Upstream commit dafabb6590cb15f300b77c095d50312e2c7c8e0f ]

In the datapath, the ip6gre_tunnel_lookup() is used and it internally uses
fallback tunnel device pointer, which is fb_tunnel_dev.
This pointer variable should be set to NULL when a fb interface is deleted.
But there is no routine to set fb_tunnel_dev pointer to NULL.
So, this pointer will be still used after interface is deleted and
it eventually results in the use-after-free problem.

Test commands:
    ip netns add A
    ip netns add B
    ip link add eth0 type veth peer name eth1
    ip link set eth0 netns A
    ip link set eth1 netns B

    ip netns exec A ip link set lo up
    ip netns exec A ip link set eth0 up
    ip netns exec A ip link add ip6gre1 type ip6gre local fc:0::1 \
    remote fc:0::2
    ip netns exec A ip -6 a a fc:100::1/64 dev ip6gre1
    ip netns exec A ip link set ip6gre1 up
    ip netns exec A ip -6 a a fc:0::1/64 dev eth0
    ip netns exec A ip link set ip6gre0 up

    ip netns exec B ip link set lo up
    ip netns exec B ip link set eth1 up
    ip netns exec B ip link add ip6gre1 type ip6gre local fc:0::2 \
    remote fc:0::1
    ip netns exec B ip -6 a a fc:100::2/64 dev ip6gre1
    ip netns exec B ip link set ip6gre1 up
    ip netns exec B ip -6 a a fc:0::2/64 dev eth1
    ip netns exec B ip link set ip6gre0 up
    ip netns exec A ping fc:100::2 -s 60000 &
    ip netns del B

Splat looks like:
[   73.087285][    C1] BUG: KASAN: use-after-free in ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[   73.088361][    C1] Read of size 4 at addr ffff888040559218 by task ping/1429
[   73.089317][    C1]
[   73.089638][    C1] CPU: 1 PID: 1429 Comm: ping Not tainted 5.7.0+ #602
[   73.090531][    C1] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   73.091725][    C1] Call Trace:
[   73.092160][    C1]  <IRQ>
[   73.092556][    C1]  dump_stack+0x96/0xdb
[   73.093122][    C1]  print_address_description.constprop.6+0x2cc/0x450
[   73.094016][    C1]  ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[   73.094894][    C1]  ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[   73.095767][    C1]  ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[   73.096619][    C1]  kasan_report+0x154/0x190
[   73.097209][    C1]  ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[   73.097989][    C1]  ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre]
[   73.098750][    C1]  ? gre_del_protocol+0x60/0x60 [gre]
[   73.099500][    C1]  gre_rcv+0x1c5/0x1450 [ip6_gre]
[   73.100199][    C1]  ? ip6gre_header+0xf00/0xf00 [ip6_gre]
[   73.100985][    C1]  ? rcu_read_lock_sched_held+0xc0/0xc0
[   73.101830][    C1]  ? ip6_input_finish+0x5/0xf0
[   73.102483][    C1]  ip6_protocol_deliver_rcu+0xcbb/0x1510
[   73.103296][    C1]  ip6_input_finish+0x5b/0xf0
[   73.103920][    C1]  ip6_input+0xcd/0x2c0
[   73.104473][    C1]  ? ip6_input_finish+0xf0/0xf0
[   73.105115][    C1]  ? rcu_read_lock_held+0x90/0xa0
[   73.105783][    C1]  ? rcu_read_lock_sched_held+0xc0/0xc0
[   73.106548][    C1]  ipv6_rcv+0x1f1/0x300
[ ... ]

Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tg3: driver sleeps indefinitely when EEH errors exceed eeh_max_freezes

[ Upstream commit 3a2656a211caf35e56afc9425e6e518fa52f7fbc ]

The driver function tg3_io_error_detected() calls napi_disable twice,
without an intervening napi_enable, when the number of EEH errors exceeds
eeh_max_freezes, resulting in an indefinite sleep while holding rtnl_lock.

Add check for pcierr_recovery which skips code already executed for the
"Frozen" state.

Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: grow window for OOO packets only for SACK flows

[ Upstream commit 662051215c758ae8545451628816204ed6cd372d ]

Back in 2013, we made a change that broke fast retransmit
for non SACK flows.

Indeed, for these flows, a sender needs to receive three duplicate
ACK before starting fast retransmit. Sending ACK with different
receive window do not count.

Even if enabling SACK is strongly recommended these days,
there still are some cases where it has to be disabled.

Not increasing the window seems better than having to
rely on RTO.

After the fix, following packetdrill test gives :

// Initialize connection
    0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
   +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
   +0 bind(3, ..., ...) = 0
   +0 listen(3, 1) = 0

   +0 < S 0:0(0) win 32792 <mss 1000,nop,wscale 7>
   +0 > S. 0:0(0) ack 1 <mss 1460,nop,wscale 8>
   +0 < . 1:1(0) ack 1 win 514

   +0 accept(3, ..., ...) = 4

   +0 < . 1:1001(1000) ack 1 win 514
// Quick ack
   +0 > . 1:1(0) ack 1001 win 264

   +0 < . 2001:3001(1000) ack 1 win 514
// DUPACK : Normally we should not change the window
   +0 > . 1:1(0) ack 1001 win 264

   +0 < . 3001:4001(1000) ack 1 win 514
// DUPACK : Normally we should not change the window
   +0 > . 1:1(0) ack 1001 win 264

   +0 < . 4001:5001(1000) ack 1 win 514
// DUPACK : Normally we should not change the window
    +0 > . 1:1(0) ack 1001 win 264

   +0 < . 1001:2001(1000) ack 1 win 514
// Hole is repaired.
   +0 > . 1:1(0) ack 5001 win 272

Fixes: 4e4f1fc22681 ("tcp: properly increase rcv_ssthresh for ofo packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: don't ignore ECN CWR on pure ACK

[ Upstream commit 2570284060b48f3f79d8f1a2698792f36c385e9a ]

there is a problem with the CWR flag set in an incoming ACK segment
and it leads to the situation when the ECE flag is latched forever

the following packetdrill script shows what happens:

// Stack receives incoming segments with CE set
+0.1 <[ect0]  . 11001:12001(1000) ack 1001 win 65535
+0.0 <[ce]    . 12001:13001(1000) ack 1001 win 65535
+0.0 <[ect0] P. 13001:14001(1000) ack 1001 win 65535

// Stack repsonds with ECN ECHO
+0.0 >[noecn]  . 1001:1001(0) ack 12001
+0.0 >[noecn] E. 1001:1001(0) ack 13001
+0.0 >[noecn] E. 1001:1001(0) ack 14001

// Write a packet
+0.1 write(3, ..., 1000) = 1000
+0.0 >[ect0] PE. 1001:2001(1000) ack 14001

// Pure ACK received
+0.01 <[noecn] W. 14001:14001(0) ack 2001 win 65535

// Since CWR was sent, this packet should NOT have ECE set

+0.1 write(3, ..., 1000) = 1000
+0.0 >[ect0]  P. 2001:3001(1000) ack 14001
// but Linux will still keep ECE latched here, with packetdrill
// flagging a missing ECE flag, expecting
// >[ect0] PE. 2001:3001(1000) ack 14001
// in the script

In the situation above we will continue to send ECN ECHO packets
and trigger the peer to reduce the congestion window. To avoid that
we can check CWR on pure ACKs received.

v3:
- Add a sequence check to avoid sending an ACK to an ACK

v2:
- Adjusted the comment
- move CWR check before checking for unacknowledged packets

Signed-off-by: Denis Kirjanov <denis.kirjanov@suse.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket

[ Upstream commit 471e39df96b9a4c4ba88a2da9e25a126624d7a9c ]

If a socket is set ipv6only, it will still send IPv4 addresses in the
INIT and INIT_ACK packets. This potentially misleads the peer into using
them, which then would cause association termination.

The fix is to not add IPv4 addresses to ipv6only sockets.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rxrpc: Fix notification call on completion of discarded calls

[ Upstream commit 0041cd5a50442db6e456b145892a0eaf2dff061f ]

When preallocated service calls are being discarded, they're passed to
->discard_new_call() to have the caller clean up any attached higher-layer
preallocated pieces before being marked completed.  However, the act of
marking them completed now invokes the call's notification function - which
causes a problem because that function might assume that the previously
freed pieces of memory are still there.

Fix this by setting a dummy notification function on the socket after
calling ->discard_new_call().

This results in the following kasan message when the kafs module is
removed.

==================================================================
BUG: KASAN: use-after-free in afs_wake_up_async_call+0x6aa/0x770 fs/afs/rxrpc.c:707
Write of size 1 at addr ffff8880946c39e4 by task kworker/u4:1/21

CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.8.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x18f/0x20d lib/dump_stack.c:118
 print_address_description.constprop.0.cold+0xd3/0x413 mm/kasan/report.c:383
 __kasan_report mm/kasan/report.c:513 [inline]
 kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
 afs_wake_up_async_call+0x6aa/0x770 fs/afs/rxrpc.c:707
 rxrpc_notify_socket+0x1db/0x5d0 net/rxrpc/recvmsg.c:40
 __rxrpc_set_call_completion.part.0+0x172/0x410 net/rxrpc/recvmsg.c:76
 __rxrpc_call_completed net/rxrpc/recvmsg.c:112 [inline]
 rxrpc_call_completed+0xca/0xf0 net/rxrpc/recvmsg.c:111
 rxrpc_discard_prealloc+0x781/0xab0 net/rxrpc/call_accept.c:233
 rxrpc_listen+0x147/0x360 net/rxrpc/af_rxrpc.c:245
 afs_close_socket+0x95/0x320 fs/afs/rxrpc.c:110
 afs_net_exit+0x1bc/0x310 fs/afs/main.c:155
 ops_exit_list.isra.0+0xa8/0x150 net/core/net_namespace.c:186
 cleanup_net+0x511/0xa50 net/core/net_namespace.c:603
 process_one_work+0x965/0x1690 kernel/workqueue.c:2269
 worker_thread+0x96/0xe10 kernel/workqueue.c:2415
 kthread+0x3b5/0x4a0 kernel/kthread.c:291
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293

Allocated by task 6820:
 save_stack+0x1b/0x40 mm/kasan/common.c:48
 set_track mm/kasan/common.c:56 [inline]
 __kasan_kmalloc mm/kasan/common.c:494 [inline]
 __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:467
 kmem_cache_alloc_trace+0x153/0x7d0 mm/slab.c:3551
 kmalloc include/linux/slab.h:555 [inline]
 kzalloc include/linux/slab.h:669 [inline]
 afs_alloc_call+0x55/0x630 fs/afs/rxrpc.c:141
 afs_charge_preallocation+0xe9/0x2d0 fs/afs/rxrpc.c:757
 afs_open_socket+0x292/0x360 fs/afs/rxrpc.c:92
 afs_net_init+0xa6c/0xe30 fs/afs/main.c:125
 ops_init+0xaf/0x420 net/core/net_namespace.c:151
 setup_net+0x2de/0x860 net/core/net_namespace.c:341
 copy_net_ns+0x293/0x590 net/core/net_namespace.c:482
 create_new_namespaces+0x3fb/0xb30 kernel/nsproxy.c:110
 unshare_nsproxy_namespaces+0xbd/0x1f0 kernel/nsproxy.c:231
 ksys_unshare+0x43d/0x8e0 kernel/fork.c:2983
 __do_sys_unshare kernel/fork.c:3051 [inline]
 __se_sys_unshare kernel/fork.c:3049 [inline]
 __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3049
 do_syscall_64+0x60/0xe0 arch/x86/entry/common.c:359
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 21:
 save_stack+0x1b/0x40 mm/kasan/common.c:48
 set_track mm/kasan/common.c:56 [inline]
 kasan_set_free_info mm/kasan/common.c:316 [inline]
 __kasan_slab_free+0xf7/0x140 mm/kasan/common.c:455
 __cache_free mm/slab.c:3426 [inline]
 kfree+0x109/0x2b0 mm/slab.c:3757
 afs_put_call+0x585/0xa40 fs/afs/rxrpc.c:190
 rxrpc_discard_prealloc+0x764/0xab0 net/rxrpc/call_accept.c:230
 rxrpc_listen+0x147/0x360 net/rxrpc/af_rxrpc.c:245
 afs_close_socket+0x95/0x320 fs/afs/rxrpc.c:110
 afs_net_exit+0x1bc/0x310 fs/afs/main.c:155
 ops_exit_list.isra.0+0xa8/0x150 net/core/net_namespace.c:186
 cleanup_net+0x511/0xa50 net/core/net_namespace.c:603
 process_one_work+0x965/0x1690 kernel/workqueue.c:2269
 worker_thread+0x96/0xe10 kernel/workqueue.c:2415
 kthread+0x3b5/0x4a0 kernel/kthread.c:291
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293

The buggy address belongs to the object at ffff8880946c3800
 which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 484 bytes inside of
 1024-byte region [ffff8880946c3800, ffff8880946c3c00)
The buggy address belongs to the page:
page:ffffea000251b0c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0xfffe0000000200(slab)
raw: 00fffe0000000200 ffffea0002546508 ffffea00024fa248 ffff8880aa000c40
raw: 0000000000000000 ffff8880946c3000 0000000100000002 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8880946c3880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8880946c3900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8880946c3980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                       ^
 ffff8880946c3a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8880946c3a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Reported-by: syzbot+d3eccef36ddbd02713e9@syzkaller.appspotmail.com
Fixes: 5ac0d62226a0 ("rxrpc: Fix missing notification")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rocker: fix incorrect error handling in dma_rings_init

[ Upstream commit 58d0c864e1a759a15c9df78f50ea5a5c32b3989e ]

In rocker_dma_rings_init, the goto blocks in case of errors
caused by the functions rocker_dma_cmd_ring_waits_alloc() and
rocker_dma_ring_create() are incorrect. The patch fixes the
order consistent with cleanup in rocker_dma_rings_fini().

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usb: ax88179_178a: fix packet alignment padding

[ Upstream commit e869e7a17798d85829fa7d4f9bbe1eebd4b2d3f6 ]

Using a AX88179 device (0b95:1790), I see two bytes of appended data on
every RX packet. For example, this 48-byte ping, using 0xff as a
payload byte:

  04:20:22.528472 IP 192.168.1.1 > 192.168.1.2: ICMP echo request, id 2447, seq 1, length 64
0x0000:  000a cd35 ea50 000a cd35 ea4f 0800 4500
0x0010:  0054 c116 4000 4001 f63e c0a8 0101 c0a8
0x0020:  0102 0800 b633 098f 0001 87ea cd5e 0000
0x0030:  0000 dcf2 0600 0000 0000 ffff ffff ffff
0x0040:  ffff ffff ffff ffff ffff ffff ffff ffff
0x0050:  ffff ffff ffff ffff ffff ffff ffff ffff
0x0060:  ffff 961f

Those last two bytes - 96 1f - aren't part of the original packet.

In the ax88179 RX path, the usbnet rx_fixup function trims a 2-byte
'alignment pseudo header' from the start of the packet, and sets the
length from a per-packet field populated by hardware. It looks like that
length field *includes* the 2-byte header; the current driver assumes
that it's excluded.

This change trims the 2-byte alignment header after we've set the packet
length, so the resulting packet length is correct. While we're moving
the comment around, this also fixes the spelling of 'pseudo'.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: increment xmit_recursion level in dev_direct_xmit()

[ Upstream commit 0ad6f6e767ec2f613418cbc7ebe5ec4c35af540c ]

Back in commit f60e5990d9c1 ("ipv6: protect skb->sk accesses
from recursive dereference inside the stack") Hannes added code
so that IPv6 stack would not trust skb->sk for typical cases
where packet goes through 'standard' xmit path (__dev_queue_xmit())

Alas af_packet had a dev_direct_xmit() path that was not
dealing yet with xmit_recursion level.

Also change sk_mc_loop() to dump a stack once only.

Without this patch, syzbot was able to trigger :

[1]
[  153.567378] WARNING: CPU: 7 PID: 11273 at net/core/sock.c:721 sk_mc_loop+0x51/0x70
[  153.567378] Modules linked in: nfnetlink ip6table_raw ip6table_filter iptable_raw iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 nf_defrag_ipv6 iptable_filter macsec macvtap tap macvlan 8021q hsr wireguard libblake2s blake2s_x86_64 libblake2s_generic udp_tunnel ip6_udp_tunnel libchacha20poly1305 poly1305_x86_64 chacha_x86_64 libchacha curve25519_x86_64 libcurve25519_generic netdevsim batman_adv dummy team bridge stp llc w1_therm wire i2c_mux_pca954x i2c_mux cdc_acm ehci_pci ehci_hcd mlx4_en mlx4_ib ib_uverbs ib_core mlx4_core
[  153.567386] CPU: 7 PID: 11273 Comm: b159172088 Not tainted 5.8.0-smp-DEV #273
[  153.567387] RIP: 0010:sk_mc_loop+0x51/0x70
[  153.567388] Code: 66 83 f8 0a 75 24 0f b6 4f 12 b8 01 00 00 00 31 d2 d3 e0 a9 bf ef ff ff 74 07 48 8b 97 f0 02 00 00 0f b6 42 3a 83 e0 01 5d c3 <0f> 0b b8 01 00 00 00 5d c3 0f b6 87 18 03 00 00 5d c0 e8 04 83 e0
[  153.567388] RSP: 0018:ffff95c69bb93990 EFLAGS: 00010212
[  153.567388] RAX: 0000000000000011 RBX: ffff95c6e0ee3e00 RCX: 0000000000000007
[  153.567389] RDX: ffff95c69ae50000 RSI: ffff95c6c30c3000 RDI: ffff95c6c30c3000
[  153.567389] RBP: ffff95c69bb93990 R08: ffff95c69a77f000 R09: 0000000000000008
[  153.567389] R10: 0000000000000040 R11: 00003e0e00026128 R12: ffff95c6c30c3000
[  153.567390] R13: ffff95c6cc4fd500 R14: ffff95c6f84500c0 R15: ffff95c69aa13c00
[  153.567390] FS:  00007fdc3a283700(0000) GS:ffff95c6ff9c0000(0000) knlGS:0000000000000000
[  153.567390] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  153.567391] CR2: 00007ffee758e890 CR3: 0000001f9ba20003 CR4: 00000000001606e0
[  153.567391] Call Trace:
[  153.567391]  ip6_finish_output2+0x34e/0x550
[  153.567391]  __ip6_finish_output+0xe7/0x110
[  153.567391]  ip6_finish_output+0x2d/0xb0
[  153.567392]  ip6_output+0x77/0x120
[  153.567392]  ? __ip6_finish_output+0x110/0x110
[  153.567392]  ip6_local_out+0x3d/0x50
[  153.567392]  ipvlan_queue_xmit+0x56c/0x5e0
[  153.567393]  ? ksize+0x19/0x30
[  153.567393]  ipvlan_start_xmit+0x18/0x50
[  153.567393]  dev_direct_xmit+0xf3/0x1c0
[  153.567393]  packet_direct_xmit+0x69/0xa0
[  153.567394]  packet_sendmsg+0xbf0/0x19b0
[  153.567394]  ? plist_del+0x62/0xb0
[  153.567394]  sock_sendmsg+0x65/0x70
[  153.567394]  sock_write_iter+0x93/0xf0
[  153.567394]  new_sync_write+0x18e/0x1a0
[  153.567395]  __vfs_write+0x29/0x40
[  153.567395]  vfs_write+0xb9/0x1b0
[  153.567395]  ksys_write+0xb1/0xe0
[  153.567395]  __x64_sys_write+0x1a/0x20
[  153.567395]  do_syscall_64+0x43/0x70
[  153.567396]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  153.567396] RIP: 0033:0x453549
[  153.567396] Code: Bad RIP value.
[  153.567396] RSP: 002b:00007fdc3a282cc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[  153.567397] RAX: ffffffffffffffda RBX: 00000000004d32d0 RCX: 0000000000453549
[  153.567397] RDX: 0000000000000020 RSI: 0000000020000300 RDI: 0000000000000003
[  153.567398] RBP: 00000000004d32d8 R08: 0000000000000000 R09: 0000000000000000
[  153.567398] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004d32dc
[  153.567398] R13: 00007ffee742260f R14: 00007fdc3a282dc0 R15: 00007fdc3a283700
[  153.567399] ---[ end trace c1d5ae2b1059ec62 ]---

f60e5990d9c1 ("ipv6: protect skb->sk accesses from recursive dereference inside the stack")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: use correct this_cpu primitive in dev_recursion_level

commit 28b05b92886871bdd8e6a9df73e3a15845fe8ef4 upstream.

syzbot reports:
BUG: using __this_cpu_read() in preemptible code:
caller is dev_recursion_level include/linux/netdevice.h:3052 [inline]
 __this_cpu_preempt_check+0x246/0x270 lib/smp_processor_id.c:47
 dev_recursion_level include/linux/netdevice.h:3052 [inline]
 ip6_skb_dst_mtu include/net/ip6_route.h:245 [inline]

I erronously downgraded a this_cpu_read to __this_cpu_read when
moving dev_recursion_level() around.

Reported-by: syzbot+51471b4aae195285a4a3@syzkaller.appspotmail.com
Fixes: 97cdcf37b57e ("net: place xmit recursion in softnet data")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: place xmit recursion in softnet data

commit 97cdcf37b57e3f204be3000b9eab9686f38b4356 upstream.

This fills a hole in softnet data, so no change in structure size.

Also prepares for xmit_more placement in the same spot;
skb->xmit_more will be removed in followup patch.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fix memleak in register_netdevice()

[ Upstream commit 814152a89ed52c722ab92e9fbabcac3cb8a39245 ]

I got a memleak report when doing some fuzz test:

unreferenced object 0xffff888112584000 (size 13599):
  comm "ip", pid 3048, jiffies 4294911734 (age 343.491s)
  hex dump (first 32 bytes):
    74 61 70 30 00 00 00 00 00 00 00 00 00 00 00 00  tap0............
    00 ee d9 19 81 88 ff ff 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000002f60ba65>] __kmalloc_node+0x309/0x3a0
    [<0000000075b211ec>] kvmalloc_node+0x7f/0xc0
    [<00000000d3a97396>] alloc_netdev_mqs+0x76/0xfc0
    [<00000000609c3655>] __tun_chr_ioctl+0x1456/0x3d70
    [<000000001127ca24>] ksys_ioctl+0xe5/0x130
    [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0
    [<00000000e1023498>] do_syscall_64+0x56/0xa0
    [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
unreferenced object 0xffff888111845cc0 (size 8):
  comm "ip", pid 3048, jiffies 4294911734 (age 343.491s)
  hex dump (first 8 bytes):
    74 61 70 30 00 88 ff ff                          tap0....
  backtrace:
    [<000000004c159777>] kstrdup+0x35/0x70
    [<00000000d8b496ad>] kstrdup_const+0x3d/0x50
    [<00000000494e884a>] kvasprintf_const+0xf1/0x180
    [<0000000097880a2b>] kobject_set_name_vargs+0x56/0x140
    [<000000008fbdfc7b>] dev_set_name+0xab/0xe0
    [<000000005b99e3b4>] netdev_register_kobject+0xc0/0x390
    [<00000000602704fe>] register_netdevice+0xb61/0x1250
    [<000000002b7ca244>] __tun_chr_ioctl+0x1cd1/0x3d70
    [<000000001127ca24>] ksys_ioctl+0xe5/0x130
    [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0
    [<00000000e1023498>] do_syscall_64+0x56/0xa0
    [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
unreferenced object 0xffff88811886d800 (size 512):
  comm "ip", pid 3048, jiffies 4294911734 (age 343.491s)
  hex dump (first 32 bytes):
    00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00  .....N..........
    ff ff ff ff ff ff ff ff c0 66 3d a3 ff ff ff ff  .........f=.....
  backtrace:
    [<0000000050315800>] device_add+0x61e/0x1950
    [<0000000021008dfb>] netdev_register_kobject+0x17e/0x390
    [<00000000602704fe>] register_netdevice+0xb61/0x1250
    [<000000002b7ca244>] __tun_chr_ioctl+0x1cd1/0x3d70
    [<000000001127ca24>] ksys_ioctl+0xe5/0x130
    [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0
    [<00000000e1023498>] do_syscall_64+0x56/0xa0
    [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

If call_netdevice_notifiers() failed, then rollback_registered()
calls netdev_unregister_kobject() which holds the kobject. The
reference cannot be put because the netdev won't be add to todo
list, so it will leads a memleak, we need put the reference to
avoid memleak.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bridge: enfore alignment for ethernet address

[ Upstream commit db7202dec92e6caa2706c21d6fc359af318bde2e ]

The eth_addr member is passed to ether_addr functions that require
2-byte alignment, therefore the member must be properly aligned
to avoid unaligned accesses.

The problem is in place since the initial merge of multicast to unicast:
commit 6db6f0eae6052b70885562e1733896647ec1d807 bridge: multicast to unicast

Fixes: 6db6f0eae605 ("bridge: multicast to unicast")
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Martitz <t.martitz@avm.de>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mld: fix memory leak in ipv6_mc_destroy_dev()

[ Upstream commit ea2fce88d2fd678ed9d45354ff49b73f1d5615dd ]

Commit a84d01647989 ("mld: fix memory leak in mld_del_delrec()") fixed
the memory leak of MLD, but missing the ipv6_mc_destroy_dev() path, in
which mca_sources are leaked after ma_put().

Using ip6_mc_clear_src() to take care of the missing free.

BUG: memory leak
unreferenced object 0xffff8881113d3180 (size 64):
  comm "syz-executor071", pid 389, jiffies 4294887985 (age 17.943s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 ff 02 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000002cbc483c>] kmalloc include/linux/slab.h:555 [inline]
    [<000000002cbc483c>] kzalloc include/linux/slab.h:669 [inline]
    [<000000002cbc483c>] ip6_mc_add1_src net/ipv6/mcast.c:2237 [inline]
    [<000000002cbc483c>] ip6_mc_add_src+0x7f5/0xbb0 net/ipv6/mcast.c:2357
    [<0000000058b8b1ff>] ip6_mc_source+0xe0c/0x1530 net/ipv6/mcast.c:449
    [<000000000bfc4fb5>] do_ipv6_setsockopt.isra.12+0x1b2c/0x3b30 net/ipv6/ipv6_sockglue.c:754
    [<00000000e4e7a722>] ipv6_setsockopt+0xda/0x150 net/ipv6/ipv6_sockglue.c:950
    [<0000000029260d9a>] rawv6_setsockopt+0x45/0x100 net/ipv6/raw.c:1081
    [<000000005c1b46f9>] __sys_setsockopt+0x131/0x210 net/socket.c:2132
    [<000000008491f7db>] __do_sys_setsockopt net/socket.c:2148 [inline]
    [<000000008491f7db>] __se_sys_setsockopt net/socket.c:2145 [inline]
    [<000000008491f7db>] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2145
    [<00000000c7bc11c5>] do_syscall_64+0xa1/0x530 arch/x86/entry/common.c:295
    [<000000005fb7a3f3>] entry_SYSCALL_64_after_hwframe+0x49/0xb3

Fixes: 1666d49e1d41 ("mld: do not remove mld souce list info when set link down")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ibmveth: Fix max MTU limit

[ Upstream commit 5948378b26d89f8aa5eac37629dbd0616ce8d7a7 ]

The max MTU limit defined for ibmveth is not accounting for
virtual ethernet buffer overhead, which is twenty-two additional
bytes set aside for the ethernet header and eight additional bytes
of an opaque handle reserved for use by the hypervisor. Update the
max MTU to reflect this overhead.

Fixes: d894be57ca92 ("ethernet: use net core MTU range checking in more drivers")
Fixes: 110447f8269a ("ethernet: fix min/max MTU typos")
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

apparmor: don't try to replace stale label in ptraceme check

[ Upstream commit ca3fde5214e1d24f78269b337d3f22afd6bf445e ]

begin_current_label_crit_section() must run in sleepable context because
when label_is_stale() is true, aa_replace_current_label() runs, which uses
prepare_creds(), which can sleep.

Until now, the ptraceme access check (which runs with tasklist_lock held)
violated this rule.

Fixes: b2d09ae449ced ("apparmor: move ptrace checks to using labels")
Reported-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek - Enable micmute LED on and HP system

[ Upstream commit 3e0650ab26e2010ee312311612e40e076ed1feca ]

Though the system uses DMIC, headset mic still uses the HDA, let's use
GPIO 0x1 to control the micmute LED.

The micmute LED GPIO has a different polarity to the mute LED GPIO, we
can use the newly added micmute_led_polarity to indicate that.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200430083255.5093-2-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek: Enable mute LED on an HP system

[ Upstream commit f5a88b0accc24c4a9021247d7a3124f90aa4c586 ]

The system in question uses ALC285, and it uses GPIO 0x04 to control its
mute LED.

The mic mute LED can be controlled by GPIO 0x01, however the system uses
DMIC so we should use that to control mic mute LED.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200327044626.29582-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek - Enable the headset of ASUS B9450FA with ALC294

[ Upstream commit 8b33a134a9cc2a501f8fc731d91caef39237d495 ]

A headset on the laptop like ASUS B9450FA does not work, until quirk
ALC294_FIXUP_ASUS_HPE is applied.

Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200225072920.109199-1-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fix a braino in "sparc32: fix register window handling in genregs32_[gs]et()"

[ Upstream commit 9d964e1b82d8182184153b70174f445ea616f053 ]

lost npc in PTRACE_SETREGSET, breaking PTRACE_SETREGS as well

Fixes: cf51e129b968 "sparc32: fix register window handling in genregs32_[gs]et()"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: tegra: Fix Maximum transfer size

[ Upstream commit b67d4530cdade7ebfafa2c6b46f2a0dad3e41bcb ]

Tegra194 supports maximum 64K Bytes transfer per packet.
Tegra186 and prior supports maximum 4K Bytes transfer per packet.

This patch fixes this payload difference between Tegra194 and prior
Tegra chipsets using separate i2c_adapter_quirks.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: tegra: Add missing kerneldoc for some fields

[ Upstream commit 0604ee4aefa20f493a32dc223599f922fb615367 ]

Not all fields were properly documented. Add kerneldoc for the missing
fields to prevent the build from flagging them.

Reported-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: tegra: Cleanup kerneldoc comments

[ Upstream commit c990bbafdb11c608bba2d529f72ded9bdff88678 ]

Some of the kerneldoc uses a strange spelling for abbreviations. Turn
them into all-uppercase and clean up some whitespace issues while at it.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

EDAC/amd64: Add Family 17h Model 30h PCI IDs

[ Upstream commit 6e846239e5487cbb89ac8192d5f11437d010130e ]

Add the new Family 17h Model 30h PCI IDs to the AMD64 EDAC module.

This also fixes a probe failure that appeared when some other PCI IDs
for Family 17h Model 30h were added to the AMD NB code.

Fixes: be3518a16ef2 (x86/amd_nb: Add PCI device IDs for family 17h, model 30h)
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190228153558.127292-1-Yazen.Ghannam@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: export __netdev_watchdog_up()

[ Upstream commit 1a3db27ad9a72d033235b9673653962c02e3486e ]

Since the quiesce/activate rework, __netdev_watchdog_up() is directly
called in the ucc_geth driver.

Unfortunately, this function is not available for modules and thus
ucc_geth cannot be built as a module anymore. Fix it by exporting
__netdev_watchdog_up().

Since the commit introducing the regression was backported to stable
branches, this one should ideally be as well.

Fixes: 79dde73cf9bc ("net/ethernet/freescale: rework quiesce/activate for ucc_geth")
Signed-off-by: Valentin Longchamp <valentin@longchamp.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bcmgenet: remove HFB_CTRL access

[ Upstream commit 24d476db6dfb0f85130e348ca1bbd14afb73a8be ]

Commit c5a54bbcecec ("net: bcmgenet: abort suspend on error")
mistakenly introduced register accesses that should not occur
in bcmgenet_wol_power_up_cfg().

Fixes: c5a54bbcecec ("net: bcmgenet: abort suspend on error")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>