OSDN Git Service
Daniel Golle [Tue, 22 Aug 2023 16:31:24 +0000 (17:31 +0100)]
net: ethernet: mtk_eth_soc: fix register definitions for MT7988
More register macros need to be adjusted for the 3rd GMAC on MT7988.
Account for added bit in SYSCFG0_SGMII_MASK.
Fixes:
445eb6448ed3 ("net: ethernet: mtk_eth_soc: add basic support for MT7988 SoC")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/1c8da012e2ca80939906d85f314138c552139f0f.1692721443.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wei Fang [Tue, 22 Aug 2023 06:52:55 +0000 (14:52 +0800)]
net: fec: add exception tracing for XDP
As we already added the exception tracing for XDP_TX, I think it is
necessary to add the exception tracing for other XDP actions, such
as XDP_REDIRECT, XDP_ABORTED and unknown error actions.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230822065255.606739-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yu Liao [Tue, 22 Aug 2023 02:14:55 +0000 (10:14 +0800)]
net: dm9051: Use PTR_ERR_OR_ZERO() to simplify code
Use the standard error pointer macro to shorten the code and simplify.
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20230822021455.205101-2-liaoyu15@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 22 Aug 2023 21:51:42 +0000 (14:51 -0700)]
bnxt: use the NAPI skb allocation cache
All callers of build_skb() (*) in bnxt are in NAPI context.
The budget checking is somewhat convoluted because in the shared
completion queue cases Rx packets are discarded by netpoll
by forcing an error (E). But that happens before skb allocation.
Only a call chain starting at __bnxt_poll_work() can lead to
an skb allocation and it checks budget (b).
* bnxt_rx_multi_page_skb
* bnxt_rx_skb
` bp->rx_skb_func
* bnxt_tpa_end
` bnxt_rx_pkt
E bnxt_force_rx_discard
E bnxt_poll_nitroa0
b __bnxt_poll_work
Use napi_build_skb() to take advantage of the skb cache.
In iperf tests with HW-GRO enabled it barely makes a difference
but in cases where HW-GRO is not as effective (or disabled) it
can give even a >10% boost (20.7Gbps -> 23.1Gbps).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexis Lothoré [Tue, 22 Aug 2023 08:41:12 +0000 (10:41 +0200)]
net: dsa: rzn1-a5psw: remove redundant logs
Remove debug logs in port vlan management, since there are already multiple
tracepoints defined for those operations in DSA
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jordan Rife [Mon, 21 Aug 2023 21:45:23 +0000 (16:45 -0500)]
net: Avoid address overwrite in kernel_connect
BPF programs that run on connect can rewrite the connect address. For
the connect system call this isn't a problem, because a copy of the address
is made when it is moved into kernel space. However, kernel_connect
simply passes through the address it is given, so the caller may observe
its address value unexpectedly change.
A practical example where this is problematic is where NFS is combined
with a system such as Cilium which implements BPF-based load balancing.
A common pattern in software-defined storage systems is to have an NFS
mount that connects to a persistent virtual IP which in turn maps to an
ephemeral server IP. This is usually done to achieve high availability:
if your server goes down you can quickly spin up a replacement and remap
the virtual IP to that endpoint. With BPF-based load balancing, mounts
will forget the virtual IP address when the address rewrite occurs
because a pointer to the only copy of that address is passed down the
stack. Server failover then breaks, because clients have forgotten the
virtual IP address. Reconnects fail and mounts remain broken. This patch
was tested by setting up a scenario like this and ensuring that NFS
reconnects worked after applying the patch.
Signed-off-by: Jordan Rife <jrife@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Feng Liu [Mon, 21 Aug 2023 14:27:13 +0000 (10:27 -0400)]
virtio_net: Introduce skb_vnet_common_hdr to avoid typecasting
The virtio_net driver currently deals with different versions and types
of virtio net headers, such as virtio_net_hdr_mrg_rxbuf,
virtio_net_hdr_v1_hash, etc. Due to these variations, the code relies
on multiple type casts to convert memory between different structures,
potentially leading to bugs when there are changes in these structures.
Introduces the "struct skb_vnet_common_hdr" as a unifying header
structure using a union. With this approach, various virtio net header
structures can be converted by accessing different members of this
structure, thus eliminating the need for type casting and reducing the
risk of potential bugs.
For example following code:
static struct sk_buff *page_to_skb(struct virtnet_info *vi,
struct receive_queue *rq,
struct page *page, unsigned int offset,
unsigned int len, unsigned int truesize,
unsigned int headroom)
{
[...]
struct virtio_net_hdr_mrg_rxbuf *hdr;
[...]
hdr_len = vi->hdr_len;
[...]
ok:
hdr = skb_vnet_hdr(skb);
memcpy(hdr, hdr_p, hdr_len);
[...]
}
When VIRTIO_NET_F_HASH_REPORT feature is enabled, hdr_len = 20
But the sizeof(*hdr) is 12,
memcpy(hdr, hdr_p, hdr_len); will copy 20 bytes to the hdr,
which make a potential risk of bug. And this risk can be avoided by
introducing struct skb_vnet_common_hdr.
Change log
v1->v2
feedback from Willem de Bruijn <willemdebruijn.kernel@gmail.com>
feedback from Simon Horman <horms@kernel.org>
1. change to use net-next tree.
2. move skb_vnet_common_hdr inside kernel file instead of the UAPI header.
v2->v3
feedback from Willem de Bruijn <willemdebruijn.kernel@gmail.com>
1. fix typo in commit message.
2. add original struct virtio_net_hdr into union
3. remove virtio_net_hdr_mrg_rxbuf variable in receive_buf;
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jinjie Ruan [Mon, 21 Aug 2023 13:35:28 +0000 (21:35 +0800)]
dp83640: Use list_for_each_entry() helper
Convert list_for_each() to list_for_each_entry() where applicable.
No functional changed.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 23 Aug 2023 07:25:28 +0000 (08:25 +0100)]
Merge branch 'mlx4-aux-bus'
Petr Pavlu says:
====================
Convert mlx4 to use auxiliary bus
This series converts the mlx4 drivers to use auxiliary bus, similarly to
how mlx5 was converted [1]. The first 6 patches are preparatory changes,
the remaining 4 are the final conversion.
Initial motivation for this change was to address a problem related to
loading mlx4_en/mlx4_ib by mlx4_core using request_module_nowait(). When
doing such a load in initrd, the operation is asynchronous to any init
control and can get unexpectedly affected/interrupted by an eventual
root switch. Using an auxiliary bus leaves these module loads to udevd
which better integrates with systemd processing. [2]
General benefit is to get rid of custom interface logic and instead use
a common facility available for this task. An obvious risk is that some
new bug is introduced by the conversion.
Leon Romanovsky was kind enough to check for me that the series passes
their verification tests.
Changes since v2 [3]:
* Use 'void *' as the event param of mlx4_dispatch_event().
Changes since v1 [4]:
* Fix a missing definition of the err variable in mlx4_en_add().
* Remove not needed comments about the event type in mlx4_en_event()
and mlx4_ib_event().
[1] https://lore.kernel.org/netdev/
20201101201542.
2027568-1-leon@kernel.org/
[2] https://lore.kernel.org/netdev/
0a361ac2-c6bd-2b18-4841-
b1b991f0635e@suse.com/
[3] https://lore.kernel.org/netdev/
20230813145127.10653-1-petr.pavlu@suse.com/
[4] https://lore.kernel.org/netdev/
20230804150527.6117-1-petr.pavlu@suse.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Pavlu [Mon, 21 Aug 2023 13:12:25 +0000 (15:12 +0200)]
mlx4: Delete custom device management logic
After the conversion to use the auxiliary bus, the custom device
management is not needed anymore and can be deleted.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Pavlu [Mon, 21 Aug 2023 13:12:24 +0000 (15:12 +0200)]
mlx4: Connect the infiniband part to the auxiliary bus
Use the auxiliary bus to perform device management of the infiniband
part of the mlx4 driver.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Pavlu [Mon, 21 Aug 2023 13:12:23 +0000 (15:12 +0200)]
mlx4: Connect the ethernet part to the auxiliary bus
Use the auxiliary bus to perform device management of the ethernet part
of the mlx4 driver.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Pavlu [Mon, 21 Aug 2023 13:12:22 +0000 (15:12 +0200)]
mlx4: Register mlx4 devices to an auxiliary virtual bus
Add an auxiliary virtual bus to model the mlx4 driver structure. The
code is added along the current custom device management logic.
Subsequent patches switch mlx4_en and mlx4_ib to the auxiliary bus and
the old interface is then removed.
Structure mlx4_priv gains a new adev dynamic array to keep track of its
auxiliary devices. Access to the array is protected by the global
mlx4_intf mutex.
Functions mlx4_register_device() and mlx4_unregister_device() are
updated to expose auxiliary devices on the bus in order to load mlx4_en
and/or mlx4_ib. Functions mlx4_register_auxiliary_driver() and
mlx4_unregister_auxiliary_driver() are added to substitute
mlx4_register_interface() and mlx4_unregister_interface(), respectively.
Function mlx4_do_bond() is adjusted to walk over the adev array and
re-adds a specific auxiliary device if its driver sets the
MLX4_INTFF_BONDING flag.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Pavlu [Mon, 21 Aug 2023 13:12:21 +0000 (15:12 +0200)]
mlx4: Avoid resetting MLX4_INTFF_BONDING per driver
The mlx4_core driver has a logic that allows a sub-driver to set the
MLX4_INTFF_BONDING flag which then causes that function mlx4_do_bond()
asks the sub-driver to fully re-probe a device when its bonding
configuration changes.
Performing this operation is disallowed in mlx4_register_interface()
when it is detected that any mlx4 device is multifunction (SRIOV). The
code then resets MLX4_INTFF_BONDING in the driver flags.
Move this check directly into mlx4_do_bond(). It provides a better
separation as mlx4_core no longer directly modifies the sub-driver flags
and it will allow to get rid of explicitly keeping track of all mlx4
devices by the intf.c code when it is switched to an auxiliary bus.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Pavlu [Mon, 21 Aug 2023 13:12:20 +0000 (15:12 +0200)]
mlx4: Move the bond work to the core driver
Function mlx4_en_queue_bond_work() is used in mlx4_en to start a bond
reconfiguration. It gathers data about a new port map setting, takes
a reference on the netdev that triggered the change and queues a work
object on mlx4_en_priv.mdev.workqueue to perform the operation. The
scheduled work is mlx4_en_bond_work() which calls
mlx4_bond()/mlx4_unbond() and consequently mlx4_do_bond().
At the same time, function mlx4_change_port_types() in mlx4_core might
be invoked to change the port type configuration. As part of its logic,
it re-registers the whole device by calling mlx4_unregister_device(),
followed by mlx4_register_device().
The two operations can result in concurrent access to the data about
currently active interfaces on the device.
Functions mlx4_register_device() and mlx4_unregister_device() lock the
intf_mutex to gain exclusive access to this data. The current
implementation of mlx4_do_bond() doesn't do that which could result in
an unexpected behavior. An updated version of mlx4_do_bond() for use
with an auxiliary bus goes and locks the intf_mutex when accessing a new
auxiliary device array.
However, doing so can then result in the following deadlock:
* A two-port mlx4 device is configured as an Ethernet bond.
* One of the ports is changed from eth to ib, for instance, by writing
into a mlx4_port<x> sysfs attribute file.
* mlx4_change_port_types() is called to update port types. It invokes
mlx4_unregister_device() to unregister the device which locks the
intf_mutex and starts removing all associated interfaces.
* Function mlx4_en_remove() gets invoked and starts destroying its first
netdev. This triggers mlx4_en_netdev_event() which recognizes that the
configured bond is broken. It runs mlx4_en_queue_bond_work() which
takes a reference on the netdev. Removing the netdev now cannot
proceed until the work is completed.
* Work function mlx4_en_bond_work() gets scheduled. It calls
mlx4_unbond() -> mlx4_do_bond(). The latter function tries to lock the
intf_mutex but that is not possible because it is held already by
mlx4_unregister_device().
This particular case could be possibly solved by unregistering the
mlx4_en_netdev_event() notifier in mlx4_en_remove() earlier, but it
seems better to decouple mlx4_en more and break this reference order.
Avoid then this scenario by recognizing that the bond reconfiguration
operates only on a mlx4_dev. The logic to queue and execute the bond
work can be moved into the mlx4_core driver. Only a reference on the
respective mlx4_dev object is needed to be taken during the work's
lifetime. This removes a call from mlx4_en that can directly result in
needing to lock the intf_mutex, it remains a privilege of the core
driver.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Pavlu [Mon, 21 Aug 2023 13:12:19 +0000 (15:12 +0200)]
mlx4: Get rid of the mlx4_interface.activate callback
The mlx4_interface.activate callback was introduced in commit
79857cd31fe7 ("net/mlx4: Postpone the registration of net_device"). It
dealt with a situation when a netdev notifier received a NETDEV_REGISTER
event for a new net_device created by mlx4_en but the same device was
not yet visible to mlx4_get_protocol_dev(). The callback can be removed
now that mlx4_get_protocol_dev() is gone.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Pavlu [Mon, 21 Aug 2023 13:12:18 +0000 (15:12 +0200)]
mlx4: Replace the mlx4_interface.event callback with a notifier
Use a notifier to implement mlx4_dispatch_event() in preparation to
switch mlx4_en and mlx4_ib to be an auxiliary device.
A problem is that if the mlx4_interface.event callback was replaced with
something as mlx4_adrv.event then the implementation of
mlx4_dispatch_event() would need to acquire a lock on a given device
before executing this callback. That is necessary because otherwise
there is no guarantee that the associated driver cannot get unbound when
the callback is running. However, taking this lock is not possible
because mlx4_dispatch_event() can be invoked from the hardirq context.
Using an atomic notifier allows the driver to accurately record when it
wants to receive these events and solves this problem.
A handler registration is done by both mlx4_en and mlx4_ib at the end of
their mlx4_interface.add callback. This matches the current situation
when mlx4_add_device() would enable events for a given device
immediately after this callback, by adding the device on the
mlx4_priv.list.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Pavlu [Mon, 21 Aug 2023 13:12:17 +0000 (15:12 +0200)]
mlx4: Use 'void *' as the event param of mlx4_dispatch_event()
Function mlx4_dispatch_event() takes an 'unsigned long' as its event
parameter. The actual value is none (MLX4_DEV_EVENT_CATASTROPHIC_ERROR),
a pointer to mlx4_eqe (MLX4_DEV_EVENT_PORT_MGMT_CHANGE), or a 32-bit
integer (remaining events).
In preparation to switch mlx4_en and mlx4_ib to be an auxiliary device,
the mlx4_interface.event callback is replaced with a notifier and
function mlx4_dispatch_event() gets updated to invoke
atomic_notifier_call_chain(). This requires forwarding the input 'param'
value from the former function to the latter. A problem is that the
notifier call takes 'void *' as its 'param' value, compared to
'unsigned long' used by mlx4_dispatch_event(). Re-passing the value
would need either punning it to 'void *' or passing down the address of
the input 'param'. Both approaches create a number of unnecessary casts.
Change instead the input 'param' of mlx4_dispatch_event() from
'unsigned long' to 'void *'. A mlx4_eqe pointer can be passed directly,
callers using an int value are adjusted to pass its address.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Pavlu [Mon, 21 Aug 2023 13:12:16 +0000 (15:12 +0200)]
mlx4: Rename member mlx4_en_dev.nb to netdev_nb
Rename the mlx4_en_dev.nb notifier_block member to netdev_nb in
preparation to add a mlx4 core notifier_block.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Pavlu [Mon, 21 Aug 2023 13:12:15 +0000 (15:12 +0200)]
mlx4: Get rid of the mlx4_interface.get_dev callback
Simplify the mlx4 driver interface by removing mlx4_get_protocol_dev()
and the associated mlx4_interface.get_dev callbacks. This is done in
preparation to use an auxiliary bus to model the mlx4 driver structure.
The change is motivated by the following situation:
* The mlx4_en interface is being initialized by mlx4_en_add() and
mlx4_en_activate().
* The latter activate function calls mlx4_en_init_netdev() ->
register_netdev() to register a new net_device.
* A netdev event NETDEV_REGISTER is raised for the device.
* The netdev notififier mlx4_ib_netdev_event() is called and it invokes
mlx4_ib_scan_netdevs() -> mlx4_get_protocol_dev() ->
mlx4_en_get_netdev() [via mlx4_interface.get_dev].
This chain creates a problem when mlx4_en gets switched to be an
auxiliary driver. It contains two device calls which would both need to
take a respective device lock.
Avoid this situation by updating mlx4_ib_scan_netdevs() to no longer
call mlx4_get_protocol_dev() but instead to utilize the information
passed in net_device.parent and net_device.dev_port. This data is
sufficient to determine that an updated port is one that the mlx4_ib
driver should take care of and to keep mlx4_ib_dev.iboe.netdevs up to
date.
Following that, update mlx4_ib_get_netdev() to also not call
mlx4_get_protocol_dev() and instead scan all current netdevs to find
find a matching one. Note that mlx4_ib_get_netdev() is called early from
ib_register_device() and cannot use data tracked in
mlx4_ib_dev.iboe.netdevs which is not at that point yet set.
Finally, remove function mlx4_get_protocol_dev() and the
mlx4_interface.get_dev callbacks (only mlx4_en_get_netdev()) as they
became unused.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yue Haibing [Mon, 21 Aug 2023 13:00:02 +0000 (21:00 +0800)]
qed/qede: Remove unused declarations
Commit
8cd160a29415 ("qede: convert to new udp_tunnel_nic infra")
removed qede_udp_tunnel_{add,del}() but not the declarations.
Commit
0ebcebbef1cc ("qed: Read device port count from the shmem")
removed qed_device_num_engines() but not its declaration.
Commit
1e128c81290a ("qed: Add support for hardware offloaded FCoE.")
declared but never implemented qed_fcoe_set_pf_params().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sai Krishna [Mon, 21 Aug 2023 10:36:29 +0000 (16:06 +0530)]
octeontx2-pf: Use PTP HW timestamp counter atomic update feature
Some of the newer silicon versions in CN10K series supports a feature
where in the current PTP timestamp in HW can be updated atomically
without losing any cpu cycles unlike read/modify/write register.
This patch uses this feature so that PTP accuracy can be improved
while adjusting the master offset in HW. There is no need for SW
timecounter when using this feature. So removed references to SW
timecounter wherever appropriate.
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 23 Aug 2023 01:47:35 +0000 (18:47 -0700)]
Merge tag 'nf-next-23-08-22' of https://git./linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter updates for net-next
First patch resolves a fortify warning by wrapping the to-be-copied
members via struct_group.
Second patch replaces array[0] with array[] in ebtables uapi.
Both changes from GONG Ruiqi.
The largest chunk is replacement of strncpy with strscpy_pad()
in netfilter, from Justin Stitt.
Last patch, from myself, aborts ruleset validation if a fatal
signal is pending, this speeds up process exit.
* tag 'nf-next-23-08-22' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: allow loop termination for pending fatal signal
netfilter: xtables: refactor deprecated strncpy
netfilter: x_tables: refactor deprecated strncpy
netfilter: nft_meta: refactor deprecated strncpy
netfilter: nft_osf: refactor deprecated strncpy
netfilter: nf_tables: refactor deprecated strncpy
netfilter: nf_tables: refactor deprecated strncpy
netfilter: ipset: refactor deprecated strncpy
netfilter: ebtables: replace zero-length array members
netfilter: ebtables: fix fortify warnings in size_entry_mwt()
====================
Link: https://lore.kernel.org/r/20230822154336.12888-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 23 Aug 2023 00:31:28 +0000 (17:31 -0700)]
Merge branch 'mptcp-prepare-mptcp-packet-scheduler-for-bpf-extension'
Mat Martineau says:
====================
mptcp: Prepare MPTCP packet scheduler for BPF extension
The kernel's MPTCP packet scheduler has, to date, been a one-size-fits
all algorithm that is hard-coded. It attempts to balance latency and
throughput when transmitting data across multiple TCP subflows, and has
some limited tunability through sysctls. It has been a long-term goal of
the Linux MPTCP community to support customizable packet schedulers for
use cases that need to make different trade-offs regarding latency,
throughput, redundancy, and other metrics. BPF is well-suited for
configuring customized, per-packet scheduling decisions without having
to modify the kernel or manage out-of-tree kernel modules.
The first steps toward implementing BPF packet schedulers are to update
the existing MPTCP transmit loops to allow more flexible scheduling
decisions, and to add infrastructure for swappable packet schedulers.
The existing scheduling algorithm remains the default. BPF-related
changes will be in a future patch series.
This code has been in the MPTCP development tree for quite a while,
undergoing testing in our CI and community.
Patches 1 and 2 refactor the transmit code and do some related cleanup.
Patches 3-9 add infrastructure for registering and calling multiple
schedulers.
Patch 10 connects the in-kernel default scheduler to the new
infrastructure.
====================
Link: https://lore.kernel.org/r/20230821-upstream-net-next-20230818-v1-0-0c860fb256a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Mon, 21 Aug 2023 22:25:21 +0000 (15:25 -0700)]
mptcp: register default scheduler
This patch defines the default packet scheduler mptcp_sched_default.
Register it in mptcp_sched_init(), which is invoked in mptcp_proto_init().
Skip deleting this default scheduler in mptcp_unregister_scheduler().
Set msk->sched to the default scheduler when the input parameter of
mptcp_init_sched() is NULL.
Invoke mptcp_sched_default_get_subflow in get_send() and get_retrans()
if the defaut scheduler is set or msk->sched is NULL.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230821-upstream-net-next-20230818-v1-10-0c860fb256a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Mon, 21 Aug 2023 22:25:20 +0000 (15:25 -0700)]
mptcp: use get_retrans wrapper
This patch adds the multiple subflows support for __mptcp_retrans(). Use
get_retrans() wrapper instead of mptcp_subflow_get_retrans() in it.
Check the subflow scheduled flags to test which subflow or subflows are
picked by the scheduler, use them to send data.
Move msk_owned_by_me() and fallback checks into get_retrans() wrapper
from mptcp_subflow_get_retrans().
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230821-upstream-net-next-20230818-v1-9-0c860fb256a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Mon, 21 Aug 2023 22:25:19 +0000 (15:25 -0700)]
mptcp: use get_send wrapper
This patch adds the multiple subflows support for __mptcp_push_pending
and __mptcp_subflow_push_pending. Use get_send() wrapper instead of
mptcp_subflow_get_send() in them.
Check the subflow scheduled flags to test which subflow or subflows are
picked by the scheduler, use them to send data.
Move msk_owned_by_me() and fallback checks into get_send() wrapper from
mptcp_subflow_get_send().
This commit allows the scheduler to set the subflow->scheduled bit in
multiple subflows, but it does not allow for sending redundant data.
Multiple scheduled subflows will send sequential data on each subflow.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230821-upstream-net-next-20230818-v1-8-0c860fb256a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Mon, 21 Aug 2023 22:25:18 +0000 (15:25 -0700)]
mptcp: add scheduler wrappers
This patch defines two packet scheduler wrappers mptcp_sched_get_send()
and mptcp_sched_get_retrans(), invoke get_subflow() of msk->sched in
them.
Set data->reinject to true in mptcp_sched_get_retrans(), set it false in
mptcp_sched_get_send().
If msk->sched is NULL, use default functions mptcp_subflow_get_send()
and mptcp_subflow_get_retrans() to send data.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230821-upstream-net-next-20230818-v1-7-0c860fb256a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Mon, 21 Aug 2023 22:25:17 +0000 (15:25 -0700)]
mptcp: add scheduled in mptcp_subflow_context
This patch adds a new member scheduled in struct mptcp_subflow_context,
which will be set in the MPTCP scheduler context when the scheduler
picks this subflow to send data.
Add a new helper mptcp_subflow_set_scheduled() to set this flag using
WRITE_ONCE().
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230821-upstream-net-next-20230818-v1-6-0c860fb256a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Mon, 21 Aug 2023 22:25:16 +0000 (15:25 -0700)]
mptcp: add sched in mptcp_sock
This patch adds a new struct member sched in struct mptcp_sock.
And two helpers mptcp_init_sched() and mptcp_release_sched() to
init and release it.
Init it with the sysctl scheduler in mptcp_init_sock(), copy the
scheduler from the parent in mptcp_sk_clone(), and release it in
__mptcp_destroy_sock().
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230821-upstream-net-next-20230818-v1-5-0c860fb256a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Mon, 21 Aug 2023 22:25:15 +0000 (15:25 -0700)]
mptcp: add a new sysctl scheduler
This patch adds a new sysctl, named scheduler, to support for selection
of different schedulers. Export mptcp_get_scheduler helper to get this
sysctl.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230821-upstream-net-next-20230818-v1-4-0c860fb256a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Mon, 21 Aug 2023 22:25:14 +0000 (15:25 -0700)]
mptcp: add struct mptcp_sched_ops
This patch defines struct mptcp_sched_ops, which has three struct members,
name, owner and list, and four function pointers: init(), release() and
get_subflow().
The scheduler function get_subflow() have a struct mptcp_sched_data
parameter, which contains a reinject flag for retrans or not, a subflows
number and a mptcp_subflow_context array.
Add the scheduler registering, unregistering and finding functions to add,
delete and find a packet scheduler on the global list mptcp_sched_list.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230821-upstream-net-next-20230818-v1-3-0c860fb256a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Mon, 21 Aug 2023 22:25:13 +0000 (15:25 -0700)]
mptcp: drop last_snd and MPTCP_RESET_SCHEDULER
Since the burst check conditions have moved out of the function
mptcp_subflow_get_send(), it makes all msk->last_snd useless.
This patch drops them as well as the macro MPTCP_RESET_SCHEDULER.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230821-upstream-net-next-20230818-v1-2-0c860fb256a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Mon, 21 Aug 2023 22:25:12 +0000 (15:25 -0700)]
mptcp: refactor push_pending logic
To support redundant package schedulers more easily, this patch refactors
__mptcp_push_pending() logic from:
For each dfrag:
While sends succeed:
Call the scheduler (selects subflow and msk->snd_burst)
Update subflow locks (push/release/acquire as needed)
Send the dfrag data with mptcp_sendmsg_frag()
Update already_sent, snd_nxt, snd_burst
Update msk->first_pending
Push/release on final subflow
->
While first_pending isn't empty:
Call the scheduler (selects subflow and msk->snd_burst)
Update subflow locks (push/release/acquire as needed)
For each pending dfrag:
While sends succeed:
Send the dfrag data with mptcp_sendmsg_frag()
Update already_sent, snd_nxt, snd_burst
Update msk->first_pending
Break if required by msk->snd_burst / etc
Push/release on final subflow
Refactors __mptcp_subflow_push_pending logic from:
For each dfrag:
While sends succeed:
Call the scheduler (selects subflow and msk->snd_burst)
Send the dfrag data with mptcp_subflow_delegate(), break
Send the dfrag data with mptcp_sendmsg_frag()
Update dfrag->already_sent, msk->snd_nxt, msk->snd_burst
Update msk->first_pending
->
While first_pending isn't empty:
Call the scheduler (selects subflow and msk->snd_burst)
Send the dfrag data with mptcp_subflow_delegate(), break
Send the dfrag data with mptcp_sendmsg_frag()
For each pending dfrag:
While sends succeed:
Send the dfrag data with mptcp_sendmsg_frag()
Update already_sent, snd_nxt, snd_burst
Update msk->first_pending
Break if required by msk->snd_burst / etc
Move the duplicate code from __mptcp_push_pending() and
__mptcp_subflow_push_pending() into a new helper function, named
__subflow_push_pending(). Simplify __mptcp_push_pending() and
__mptcp_subflow_push_pending() by invoking this helper.
Also move the burst check conditions out of the function
mptcp_subflow_get_send(), check them in __subflow_push_pending() in
the inner "for each pending dfrag" loop.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230821-upstream-net-next-20230818-v1-1-0c860fb256a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 22 Aug 2023 18:07:06 +0000 (11:07 -0700)]
Merge tag 'mlx5-updates-2023-08-16' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-08-16
1) aRFS ethtool stats
Improve aRFS observability by adding new set of counters. Each Rx
ring will have this set of counters listed below.
These counters are exposed through ethtool -S.
1.1) arfs_add: number of times a new rule has been created.
1.2) arfs_request_in: number of times a rule was requested to move from
its current Rx ring to a new Rx ring (incremented on the destination
Rx ring).
1.3) arfs_request_out: number of times a rule was requested to move out
from its current Rx ring (incremented on source/current Rx ring).
1.4) arfs_expired: number of times a rule has been expired by the
kernel and removed from HW.
1.5) arfs_err: number of times a rule creation or modification has
failed.
2) Supporting inline WQE when possible in SW steering
3) Misc cleanups and fixups to net-next branch
* tag 'mlx5-updates-2023-08-16' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Devcom, only use devcom after NULL check in mlx5_devcom_send_event()
net/mlx5: DR, Supporting inline WQE when possible
net/mlx5: Rename devlink port ops struct for PFs/VFs
net/mlx5: Remove VPORT_UPLINK handling from devlink_port.c
net/mlx5: Call mlx5_esw_offloads_rep_load/unload() for uplink port directly
net/mlx5: Update dead links in Kconfig documentation
net/mlx5: Remove health syndrome enum duplication
net/mlx5: DR, Remove unneeded local variable
net/mlx5: DR, Fix code indentation
net/mlx5: IRQ, consolidate irq and affinity mask allocation
net/mlx5e: Fix spelling mistake "Faided" -> "Failed"
net/mlx5e: aRFS, Introduce ethtool stats
net/mlx5e: aRFS, Warn if aRFS table does not exist for aRFS rule
net/mlx5e: aRFS, Prevent repeated kernel rule migrations requests
====================
Link: https://lore.kernel.org/r/20230821175739.81188-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Mon, 21 Aug 2023 14:23:39 +0000 (17:23 +0300)]
vrf: Remove unnecessary RCU-bh critical section
dev_queue_xmit_nit() already uses rcu_read_lock() / rcu_read_unlock()
and nothing suggests that softIRQs should be disabled around it.
Therefore, remove the rcu_read_lock_bh() / rcu_read_unlock_bh()
surrounding it.
Tested using [1] with lockdep enabled.
[1]
#!/bin/bash
ip link add name vrf1 up type vrf table 100
ip link add name veth0 type veth peer name veth1
ip link set dev veth1 master vrf1
ip link set dev veth0 up
ip link set dev veth1 up
ip address add 192.0.2.1/24 dev veth0
ip address add 192.0.2.2/24 dev veth1
ip rule add pref 32765 table local
ip rule del pref 0
tcpdump -i vrf1 -c 20 -w /dev/null &
sleep 10
ping -i 0.1 -c 10 -q 192.0.2.2
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230821142339.1889961-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Mon, 21 Aug 2023 14:19:23 +0000 (17:19 +0300)]
vxlan: vnifilter: Use GFP_KERNEL instead of GFP_ATOMIC
The function is not called from an atomic context so use GFP_KERNEL
instead of GFP_ATOMIC. The allocation of the per-CPU stats is already
performed with GFP_KERNEL.
Tested using test_vxlan_vnifiltering.sh with CONFIG_DEBUG_ATOMIC_SLEEP.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230821141923.1889776-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yue Haibing [Mon, 21 Aug 2023 13:40:29 +0000 (21:40 +0800)]
net: ethernet: ti: Remove unused declarations
Commit
e8609e69470f ("net: ethernet: ti: am65-cpsw: Convert to PHYLINK")
removed am65_cpsw_nuss_adjust_link() but not its declaration.
Commit
84640e27f230 ("net: netcp: Add Keystone NetCP core ethernet driver")
declared but never implemented netcp_device_find_module().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230821134029.40084-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yue Haibing [Mon, 21 Aug 2023 13:55:56 +0000 (21:55 +0800)]
net: microchip: Remove unused declarations
Commit
264a9c5c9dff ("net: sparx5: Remove unused GLAG handling in PGID")
removed sparx5_pgid_alloc_glag() but not its declaration.
Commit
27d293cceee5 ("net: microchip: sparx5: Add support for rule count by cookie")
removed vcap_rule_iter() but not its declaration.
Commit
8beef08f4618 ("net: microchip: sparx5: Adding initial VCAP API support")
declared but never implemented vcap_api_set_client().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821135556.43224-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yue Haibing [Mon, 21 Aug 2023 13:47:17 +0000 (21:47 +0800)]
ionic: Remove unused declarations
Commit
fbfb8031533c ("ionic: Add hardware init and device commands")
declared but never implemented ionic_q_rewind()/ionic_set_dma_mask().
Commit
969f84394604 ("ionic: sync the filters in the work task")
declared but never implemented ionic_rx_filters_need_sync().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20230821134717.51936-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yue Haibing [Mon, 21 Aug 2023 13:02:18 +0000 (21:02 +0800)]
net: mscc: ocelot: Remove unused declarations
Commit
6c30384eb1de ("net: mscc: ocelot: register devlink ports")
declared but never implemented ocelot_devlink_init() and
ocelot_devlink_teardown().
Commit
2096805497e2 ("net: mscc: ocelot: automatically detect VCAP constants")
declared but never implemented ocelot_detect_vcap_constants().
Commit
403ffc2c34de ("net: mscc: ocelot: add support for preemptible traffic classes")
declared but never implemented ocelot_port_update_preemptible_tcs().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230821130218.19096-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yue Haibing [Mon, 21 Aug 2023 12:55:01 +0000 (20:55 +0800)]
net: dsa: microchip: Remove unused declarations
Commit
91a98917a883 ("net: dsa: microchip: move switch chip_id detection to ksz_common")
removed ksz8_switch_detect() but not its declaration.
Commit
6ec23aaaac43 ("net: dsa: microchip: move ksz_dev_ops to ksz_common.c")
declared but never implemented other functions.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20230821125501.19624-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal [Wed, 21 Jun 2023 08:36:26 +0000 (10:36 +0200)]
netfilter: nf_tables: allow loop termination for pending fatal signal
abort early so task can exit faster if a fatal signal is pending,
no need to continue validation in that case.
Signed-off-by: Florian Westphal <fw@strlen.de>
Justin Stitt [Wed, 9 Aug 2023 01:06:10 +0000 (01:06 +0000)]
netfilter: xtables: refactor deprecated strncpy
Prefer `strscpy_pad` as it's a more robust interface whilst maintaing
zero-padding behavior.
There may have existed a bug here due to both `tbl->repl.name` and
`info->name` having a size of 32 as defined below:
| #define XT_TABLE_MAXNAMELEN 32
This may lead to buffer overreads in some situations -- `strscpy` solves
this by guaranteeing NUL-termination of the dest buffer.
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Justin Stitt [Wed, 9 Aug 2023 01:06:09 +0000 (01:06 +0000)]
netfilter: x_tables: refactor deprecated strncpy
Prefer `strscpy_pad` to `strncpy`.
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Justin Stitt [Wed, 9 Aug 2023 01:06:07 +0000 (01:06 +0000)]
netfilter: nft_meta: refactor deprecated strncpy
Prefer `strscpy_pad` to `strncpy`.
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Justin Stitt [Wed, 9 Aug 2023 01:06:08 +0000 (01:06 +0000)]
netfilter: nft_osf: refactor deprecated strncpy
Use `strscpy_pad` over `strncpy` for NUL-terminated strings.
We can also drop the + 1 from `NFT_OSF_MAXGENRELEN + 1` since `strscpy`
will guarantee NUL-termination.
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Justin Stitt [Wed, 9 Aug 2023 01:06:06 +0000 (01:06 +0000)]
netfilter: nf_tables: refactor deprecated strncpy
Prefer `strscpy_pad` over `strncpy`.
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Justin Stitt [Wed, 9 Aug 2023 01:06:05 +0000 (01:06 +0000)]
netfilter: nf_tables: refactor deprecated strncpy
Prefer `strscpy_pad` over `strncpy`.
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Justin Stitt [Wed, 9 Aug 2023 01:06:04 +0000 (01:06 +0000)]
netfilter: ipset: refactor deprecated strncpy
Use `strscpy_pad` instead of `strncpy`.
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
GONG, Ruiqi [Wed, 9 Aug 2023 07:51:36 +0000 (15:51 +0800)]
netfilter: ebtables: replace zero-length array members
As suggested by Kees[1], replace the old-style 0-element array members
of multiple structs in ebtables.h with modern C99 flexible array.
[1]: https://lore.kernel.org/all/
5E8E0F9C-EE3F-4B0D-B827-
DC47397E2A4A@kernel.org/
[ fw@strlen.de:
keep struct ebt_entry_target as-is, causes compiler warning:
"variable sized type 'struct ebt_entry_target' not at the end of a
struct or class is a GNU extension" ]
Link: https://github.com/KSPP/linux/issues/21
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
GONG, Ruiqi [Wed, 9 Aug 2023 07:45:03 +0000 (15:45 +0800)]
netfilter: ebtables: fix fortify warnings in size_entry_mwt()
When compiling with gcc 13 and CONFIG_FORTIFY_SOURCE=y, the following
warning appears:
In function ‘fortify_memcpy_chk’,
inlined from ‘size_entry_mwt’ at net/bridge/netfilter/ebtables.c:2118:2:
./include/linux/fortify-string.h:592:25: error: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Werror=attribute-warning]
592 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The compiler is complaining:
memcpy(&offsets[1], &entry->watchers_offset,
sizeof(offsets) - sizeof(offsets[0]));
where memcpy reads beyong &entry->watchers_offset to copy
{watchers,target,next}_offset altogether into offsets[]. Silence the
warning by wrapping these three up via struct_group().
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Hangbin Liu [Mon, 21 Aug 2023 10:10:08 +0000 (18:10 +0800)]
bonding: update port speed when getting bond speed
Andrew reported a bonding issue that if we put an active-back bond on top
of a 802.3ad bond interface. When the 802.3ad bond's speed/duplex changed
dynamically. The upper bonding interface's speed/duplex can't be changed at
the same time, which will show incorrect speed.
Fix it by updating the port speed when calling ethtool.
Reported-by: Andrew Schorr <ajschorr@alumni.princeton.edu>
Closes: https://lore.kernel.org/netdev/ZEt3hvyREPVdbesO@Laptop-X1/
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20230821101008.797482-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Zhengchao Shao [Mon, 21 Aug 2023 08:41:04 +0000 (16:41 +0800)]
net: remove unnecessary input parameter 'how' in ifdown function
When the ifdown function in the dst_ops structure is referenced, the input
parameter 'how' is always true. In the current implementation of the
ifdown interface, ip6_dst_ifdown does not use the input parameter 'how',
xfrm6_dst_ifdown and xfrm4_dst_ifdown functions use the input parameter
'unregister'. But false judgment on 'unregister' in xfrm6_dst_ifdown and
xfrm4_dst_ifdown is false, so remove the input parameter 'how' in ifdown
function.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821084104.3812233-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
GONG, Ruiqi [Mon, 21 Aug 2023 01:32:18 +0000 (09:32 +0800)]
alx: fix OOB-read compiler warning
The following message shows up when compiling with W=1:
In function ‘fortify_memcpy_chk’,
inlined from ‘alx_get_ethtool_stats’ at drivers/net/ethernet/atheros/alx/ethtool.c:297:2:
./include/linux/fortify-string.h:592:4: error: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Werror=attribute-warning]
592 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In order to get alx stats altogether, alx_get_ethtool_stats() reads
beyond hw->stats.rx_ok. Fix this warning by directly copying hw->stats,
and refactor the unnecessarily complicated BUILD_BUG_ON btw.
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821013218.1614265-1-gongruiqi@huaweicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Daniel Golle [Fri, 18 Aug 2023 03:07:46 +0000 (04:07 +0100)]
net: pcs: lynxi: implement pcs_disable op
When switching from 10GBase-R/5GBase-R/USXGMII to one of the interface
modes provided by mtk-pcs-lynxi we need to make sure to always perform
a full configuration of the PHYA.
Implement pcs_disable op which resets the stored interface mode to
PHY_INTERFACE_MODE_NA to trigger a full reconfiguration once the LynxI
PCS driver had previously been deselected in favor of another PCS
driver such as the to-be-added driver for the USXGMII PCS found in
MT7988.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/f23d1a60d2c9d2fb72e32dcb0eaa5f7e867a3d68.1692327891.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 21 Aug 2023 19:11:35 +0000 (12:11 -0700)]
Revert "pds_core: Fix some kernel-doc comments"
This reverts commit
cb39c35783f26892bb1a72b1115c94fa2e77f4c5.
Patch was applied to hastily, the problem is already fixed
in Alex's vfio tree:
https://lore.kernel.org/all/
20230821112237.
105872b5.alex.williamson@redhat.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Li Zetao [Mon, 14 Aug 2023 07:23:42 +0000 (15:23 +0800)]
net/mlx5: Devcom, only use devcom after NULL check in mlx5_devcom_send_event()
There is a warning reported by kernel test robot:
smatch warnings:
drivers/net/ethernet/mellanox/mlx5/core/lib/devcom.c:264
mlx5_devcom_send_event() warn: variable dereferenced before
IS_ERR check devcom (see line 259)
The reason for the warning is that the pointer is used before check, put
the assignment to comp after devcom check to silence the warning.
Fixes:
88d162b47981 ("net/mlx5: Devcom, Infrastructure changes")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/
202308041028.AkXYDwJ6-lkp@intel.com/
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Itamar Gozlan [Mon, 7 Aug 2023 12:07:26 +0000 (15:07 +0300)]
net/mlx5: DR, Supporting inline WQE when possible
In WQE (Work Queue Entry), the two types of data segments memories are
pointers and inline data, where inline data is passed directly as
part of the WQE.
For software steering, the maximal inline size should be less than
2*MLX5_SEND_WQE_BB, i.e., the potential data must fit with the required
inline WQE headers.
Two consecutive blocks (MLX5_SEND_WQE_BB) are not guaranteed to reside
on the same memory page. Hence, writes to MLX5_SEND_WQE_BB should be
done separately, i.e., each MLX5_SEND_WQE_BB should be obtained using
the mlx5_wq_cyc_get_wqe macro.
Signed-off-by: Itamar Gozlan <igozlan@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Jiri Pirko [Fri, 26 May 2023 12:23:54 +0000 (14:23 +0200)]
net/mlx5: Rename devlink port ops struct for PFs/VFs
As this struct is only used for devlink ports created for PF/VF,
add it to the name of the variable to distinguish from the SF related
ops struct.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Jiri Pirko [Thu, 25 May 2023 09:07:32 +0000 (11:07 +0200)]
net/mlx5: Remove VPORT_UPLINK handling from devlink_port.c
It is not possible that the functions in devlink_port.c are called for
uplink port. Remove this leftover code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Jiri Pirko [Wed, 24 May 2023 17:14:38 +0000 (19:14 +0200)]
net/mlx5: Call mlx5_esw_offloads_rep_load/unload() for uplink port directly
For uplink port, mlx5_esw_offloads_load/unload_rep() are currently
called. There are 2 check inside, which effectively make the
functions a simple wrappers of mlx5_esw_offloads_rep_load/unload()
for uplink port. So avoid one check and indirection and call
mlx5_esw_offloads_rep_load/unload() for uplink port directly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Rahul Rameshbabu [Tue, 11 Jul 2023 01:32:46 +0000 (18:32 -0700)]
net/mlx5: Update dead links in Kconfig documentation
Point to NVIDIA documentation for device specific information now that the
Mellanox documentation site is deprecated. Refer to kernel documentation
sources for generic information not specific to mlx5 devices.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Gal Pressman [Mon, 26 Jun 2023 11:26:17 +0000 (14:26 +0300)]
net/mlx5: Remove health syndrome enum duplication
Health syndrome enum values were duplicated in mlx5_ifc and health.c,
the correct place for them is mlx5_ifc.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Tue, 1 Aug 2023 22:03:31 +0000 (01:03 +0300)]
net/mlx5: DR, Remove unneeded local variable
Remove local variable that is already defined outside of
the scope of this block.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Tue, 1 Aug 2023 22:01:14 +0000 (01:01 +0300)]
net/mlx5: DR, Fix code indentation
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Saeed Mahameed [Fri, 9 Jun 2023 19:10:27 +0000 (12:10 -0700)]
net/mlx5: IRQ, consolidate irq and affinity mask allocation
Consolidate the mlx5_irq and mlx5_irq->mask allocation, to simplify
error flows and to match the dealloctation sequence @irq_release for
symmetry.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Colin Ian King [Fri, 4 Aug 2023 18:23:06 +0000 (19:23 +0100)]
net/mlx5e: Fix spelling mistake "Faided" -> "Failed"
There is a spelling mistake in a warning message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Adham Faris [Wed, 8 Mar 2023 10:08:43 +0000 (12:08 +0200)]
net/mlx5e: aRFS, Introduce ethtool stats
Improve aRFS observability by adding new set of counters. Each Rx
ring will have this set of counters listed below.
These counters are exposed through ethtool -S.
1) arfs_add: number of times a new rule has been created.
2) arfs_request_in: number of times a rule was requested to move from
its current Rx ring to a new Rx ring (incremented on the destination
Rx ring).
3) arfs_request_out: number of times a rule was requested to move out
from its current Rx ring (incremented on source/current Rx ring).
4) arfs_expired: number of times a rule has been expired by the
kernel and removed from HW.
5) arfs_err: number of times a rule creation or modification has
failed.
This patch removes rx[i]_xsk_arfs_err counter and its documentation in
mlx5/counters.rst since aRFS activity does not occur in XSK RQ's.
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Adham Faris [Mon, 8 May 2023 11:27:48 +0000 (14:27 +0300)]
net/mlx5e: aRFS, Warn if aRFS table does not exist for aRFS rule
aRFS tables should be allocated and exist in advance. Driver shouldn't
reach a point where it tries to add aRFS rule to table that does not
exist.
Add warning if driver encounters such situation.
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Adham Faris [Wed, 8 Mar 2023 09:59:36 +0000 (11:59 +0200)]
net/mlx5e: aRFS, Prevent repeated kernel rule migrations requests
aRFS rule movement requests from one Rx ring to other Rx ring arrive
from the kernel to ensure that packets are steered to the right Rx ring.
In the time interval until satisfying such a request, several more
requests might follow, for the same flow.
This patch detects and prevents repeated aRFS rules movement requests.
In mlx5e_rx_flow_steer() ndo, after finding the aRFS rule that have been
requested to move by the kernel, check if it's already requested to move
by calling work_busy(&arfs_rule->arfs_work) handler. IOW, if this
request is pending to be executed (in the work queue) or it's executing
now but hasn't finished yet, return current filter ID and don't issue a
new transition work.
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yang Li [Mon, 21 Aug 2023 01:55:37 +0000 (09:55 +0800)]
pds_core: Fix some kernel-doc comments
Fix some kernel-doc comments to silence the warnings:
drivers/net/ethernet/amd/pds_core/auxbus.c:18: warning: Function parameter or member 'pf' not described in 'pds_client_register'
drivers/net/ethernet/amd/pds_core/auxbus.c:18: warning: Excess function parameter 'pf_pdev' description in 'pds_client_register'
drivers/net/ethernet/amd/pds_core/auxbus.c:58: warning: Function parameter or member 'pf' not described in 'pds_client_unregister'
drivers/net/ethernet/amd/pds_core/auxbus.c:58: warning: Excess function parameter 'pf_pdev' description in 'pds_client_unregister'
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 19 Aug 2023 04:06:46 +0000 (04:06 +0000)]
net: annotate data-races around sk->sk_lingertime
sk_getsockopt() runs locklessly. This means sk->sk_lingertime
can be read while other threads are changing its value.
Other reads also happen without socket lock being held,
and must be annotated.
Remove preprocessor logic using BITS_PER_LONG, compilers
are smart enough to figure this by themselves.
v2: fixed a clang W=1 (-Wtautological-constant-out-of-range-compare) warning
(Jakub)
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Fri, 18 Aug 2023 08:25:23 +0000 (16:25 +0800)]
IPv4: add extack info for IPv4 address add/delete
Add extack info for IPv4 address add/delete, which would be useful for
users to understand the problem without having to read kernel code.
No extack message for the ifa_local checking in __inet_insert_ifa() as
it has been checked in find_matching_ifa().
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Furong Xu [Sat, 19 Aug 2023 10:54:40 +0000 (18:54 +0800)]
net: stmmac: Check more MAC HW features for XGMAC Core 3.20
1. XGMAC Core does not have hash_filter definition, it uses
vlhash(VLAN Hash Filtering) instead, skip hash_filter when XGMAC.
2. Show exact size of Hash Table instead of raw register value.
3. Show full description of safety features defined by Synopsys Databook.
4. When safety feature is configured with no parity, or ECC only,
keep FSM Parity Checking disabled.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 20 Aug 2023 14:27:22 +0000 (15:27 +0100)]
Merge branch 'ipv6-update-route-when-delete-saddr'
Hangbin Liu says:
====================
ipv6: update route when delete source address
Currently, when remove an address, the IPv6 route will not remove the
prefer source address when the address is bond to other device. Fix this
issue and add related tests as Ido and David suggested.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Fri, 18 Aug 2023 08:29:02 +0000 (16:29 +0800)]
selftests: fib_test: add a test case for IPv6 source address delete
Add a test case for IPv6 source address delete.
As David suggested, add tests:
- Single device using src address
- Two devices with the same source address
- VRF with single device using src address
- VRF with two devices using src address
As Ido points out, in IPv6, the preferred source address is looked up in
the same VRF as the first nexthop device. This will give us similar results
to IPv4 if the route is installed in the same VRF as the nexthop device, but
not when the nexthop device is enslaved to a different VRF. So add tests:
- src address and nexthop dev in same VR
- src address and nexthop device in different VRF
The link local address delete logic is different from the global address.
It should only affect the associate device it bonds to. So add tests cases
for link local address testing.
Here is the test result:
IPv6 delete address route tests
Single device using src address
TEST: Prefsrc removed when src address removed on other device [ OK ]
Two devices with the same source address
TEST: Prefsrc not removed when src address exist on other device [ OK ]
TEST: Prefsrc removed when src address removed on all devices [ OK ]
VRF with single device using src address
TEST: Prefsrc removed when src address removed on other device [ OK ]
VRF with two devices using src address
TEST: Prefsrc not removed when src address exist on other device [ OK ]
TEST: Prefsrc removed when src address removed on all devices [ OK ]
src address and nexthop dev in same VRF
TEST: Prefsrc removed from VRF when source address deleted [ OK ]
TEST: Prefsrc in default VRF not removed [ OK ]
TEST: Prefsrc not removed from VRF when source address exist [ OK ]
TEST: Prefsrc in default VRF removed [ OK ]
src address and nexthop device in different VRF
TEST: Prefsrc not removed from VRF when nexthop dev in diff VRF [ OK ]
TEST: Prefsrc not removed in default VRF [ OK ]
TEST: Prefsrc removed from VRF when nexthop dev in diff VRF [ OK ]
TEST: Prefsrc removed in default VRF [ OK ]
Table ID 0
TEST: Prefsrc removed from default VRF when source address deleted [ OK ]
Link local source route
TEST: Prefsrc not removed when delete ll addr from other dev [ OK ]
TEST: Prefsrc removed when delete ll addr [ OK ]
TEST: Prefsrc not removed when delete ll addr from other dev [ OK ]
TEST: Prefsrc removed even ll addr still exist on other dev [ OK ]
Tests passed: 19
Tests failed: 0
Suggested-by: Ido Schimmel <idosch@idosch.org>
Suggested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Fri, 18 Aug 2023 08:29:01 +0000 (16:29 +0800)]
ipv6: do not match device when remove source route
After deleting an IPv6 address on an interface and cleaning up the
related preferred source entries, it is important to ensure that all
routes associated with the deleted address are properly cleared. The
current implementation of rt6_remove_prefsrc() only checks the preferred
source addresses bound to the current device. However, there may be
routes that are bound to other devices but still utilize the same
preferred source address.
To address this issue, it is necessary to also delete entries that are
bound to other interfaces but share the same source address with the
current device. Failure to delete these entries would leave routes that
are bound to the deleted address unclear. Here is an example reproducer
(I have omitted unrelated routes):
+ ip link add dummy1 type dummy
+ ip link add dummy2 type dummy
+ ip link set dummy1 up
+ ip link set dummy2 up
+ ip addr add 1:2:3:4::5/64 dev dummy1
+ ip route add 7:7:7:0::1 dev dummy1 src 1:2:3:4::5
+ ip route add 7:7:7:0::2 dev dummy2 src 1:2:3:4::5
+ ip -6 route show
1:2:3:4::/64 dev dummy1 proto kernel metric 256 pref medium
7:7:7::1 dev dummy1 src 1:2:3:4::5 metric 1024 pref medium
7:7:7::2 dev dummy2 src 1:2:3:4::5 metric 1024 pref medium
+ ip addr del 1:2:3:4::5/64 dev dummy1
+ ip -6 route show
7:7:7::1 dev dummy1 metric 1024 pref medium
7:7:7::2 dev dummy2 src 1:2:3:4::5 metric 1024 pref medium
As Ido reminds, in IPv6, the preferred source address is looked up in
the same VRF as the first nexthop device, which is different with IPv4.
So, while removing the device checking, we also need to add an
ipv6_chk_addr() check to make sure the address does not exist on the other
devices of the rt nexthop device's VRF.
After fix:
+ ip addr del 1:2:3:4::5/64 dev dummy1
+ ip -6 route show
7:7:7::1 dev dummy1 metric 1024 pref medium
7:7:7::2 dev dummy2 metric 1024 pref medium
Reported-by: Thomas Haller <thaller@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=
2170513
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Fri, 18 Aug 2023 08:06:13 +0000 (16:06 +0800)]
selftests: vrf_route_leaking: remove ipv6_ping_frag from default testing
As the initial commit
1a01727676a8 ("selftests: Add VRF route leaking
tests") said, the IPv6 MTU test fails as source address selection
picking ::1. Every time we run the selftest this one report failed.
There seems not much meaning to keep reporting a failure for 3 years
that no one plan to fix/update. Let't just skip this one first. We can
add it back when the issue fixed.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick Rohr [Fri, 18 Aug 2023 18:22:49 +0000 (11:22 -0700)]
net: release reference to inet6_dev pointer
addrconf_prefix_rcv returned early without releasing the inet6_dev
pointer when the PIO lifetime is less than accept_ra_min_lft.
Fixes:
5027d54a9c30 ("net: change accept_ra_min_rtr_lft to affect all RA lifetimes")
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Patrick Rohr <prohr@google.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 18 Aug 2023 17:41:45 +0000 (17:41 +0000)]
net: selectively purge error queue in IP_RECVERR / IPV6_RECVERR
Setting IP_RECVERR and IPV6_RECVERR options to zero currently
purges the socket error queue, which was probably not expected
for zerocopy and tx_timestamp users.
I discovered this issue while preparing commit
6b5f43ea0815
("inet: move inet->recverr to inet->inet_flags"), I presume this
change does not need to be backported to stable kernels.
Add skb_errqueue_purge() helper to purge error messages only.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 20 Aug 2023 14:13:27 +0000 (15:13 +0100)]
Merge branch 'fixed_phy_register-return-value'
Ruan Jinjie says:
====================
net: Return PTR_ERR() for fixed_phy_register()
fixed_phy_register() returns not only -EIO or -ENODEV, but also
-EPROBE_DEFER, -EINVAL and -EBUSY. The Best practice is to return these
error codes with PTR_ERR().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ruan Jinjie [Fri, 18 Aug 2023 07:07:07 +0000 (15:07 +0800)]
net: lan743x: Return PTR_ERR() for fixed_phy_register()
fixed_phy_register() returns -EPROBE_DEFER, -EINVAL and -EBUSY,
etc, in addition to -EIO. The Best practice is to return these
error codes with PTR_ERR().
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ruan Jinjie [Fri, 18 Aug 2023 07:07:06 +0000 (15:07 +0800)]
net: bcmgenet: Return PTR_ERR() for fixed_phy_register()
fixed_phy_register() returns -EPROBE_DEFER, -EINVAL and -EBUSY,
etc, in addition to -ENODEV. The Best practice is to return these
error codes with PTR_ERR().
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ruan Jinjie [Fri, 18 Aug 2023 07:07:05 +0000 (15:07 +0800)]
net: bgmac: Return PTR_ERR() for fixed_phy_register()
fixed_phy_register() returns -EPROBE_DEFER, -EINVAL and -EBUSY,
etc, in addition to -ENODEV. The best practice is to return
these error codes with PTR_ERR().
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King (Oracle) [Sat, 19 Aug 2023 11:11:06 +0000 (12:11 +0100)]
net: dsa: realtek: add phylink_get_caps implementation
The user ports use RSGMII, but we don't have that, and DT doesn't
specify a phy interface mode, so phylib defaults to GMII. These support
1G, 100M and 10M with flow control. It is unknown whether asymetric
pause is supported at all speeds.
The CPU port uses MII/GMII/RGMII/REVMII by hardware pin strapping,
and support speeds specific to each, with full duplex only supported
in some modes. Flow control may be supported again by hardware pin
strapping, and theoretically is readable through a register but no
information is given in the datasheet for that.
So, we do a best efforts - and be lenient.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 19 Aug 2023 18:29:23 +0000 (19:29 +0100)]
Merge branch 'vcap_get_rule-return-value'
Ruan Jinjie says:
====================
net: Update and fix return value check for vcap_get_rule()
As Simon Horman suggests, update vcap_get_rule() to always
return an ERR_PTR() and update the error detection conditions to
use IS_ERR(), which would be more cleaner.
So se IS_ERR() to update the return value and fix the issue
in lan966x_ptp_add_trap().
Changes in v2:
- Update vcap_get_rule() to always return an ERR_PTR().
- Update the return value fix in lan966x_ptp_add_trap().
- Update the return value check in sparx5_tc_free_rule_resources().
====================
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ruan Jinjie [Fri, 18 Aug 2023 05:05:05 +0000 (13:05 +0800)]
net: microchip: sparx5: Update return value check for vcap_get_rule()
As Simon Horman suggests, update vcap_get_rule() to always
return an ERR_PTR() and update the error detection conditions to
use IS_ERR(), so use IS_ERR() to check the return value.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Suggested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ruan Jinjie [Fri, 18 Aug 2023 05:05:04 +0000 (13:05 +0800)]
net: lan966x: Fix return value check for vcap_get_rule()
As Simon Horman suggests, update vcap_get_rule() to always
return an ERR_PTR() and update the error detection conditions to
use IS_ERR(), so use IS_ERR() to fix the return value issue.
Fixes:
72df3489fb10 ("net: lan966x: Add ptp trap rules")
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Suggested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ruan Jinjie [Fri, 18 Aug 2023 05:05:03 +0000 (13:05 +0800)]
net: microchip: vcap api: Always return ERR_PTR for vcap_get_rule()
As Simon Horman suggests, update vcap_get_rule() to always
return an ERR_PTR() and update the error detection conditions to
use IS_ERR(), which would be more cleaner in this case.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Suggested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King (Oracle) [Fri, 18 Aug 2023 11:33:24 +0000 (12:33 +0100)]
net: mdio: xgene: remove useless xgene_mdio_status
xgene_mdio_status is declared static, and is only written once by the
driver. It appears to have been this way since the driver was first
added to the kernel tree. No other users can be found, so let's remove
it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 18 Aug 2023 11:19:27 +0000 (13:19 +0200)]
tools: ynl-gen: use temporary file for rendering
Currently any error during render leads to output an empty file.
That is quite annoying when using tools/net/ynl/ynl-regen.sh
which git greps files with content of "YNL-GEN.." and therefore ignores
empty files. So once you fail to regen, you have to checkout the file.
Avoid that by rendering to a temporary file first, only at the end
copy the content to the actual destination.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kurt Kanzenbach [Fri, 18 Aug 2023 11:14:01 +0000 (13:14 +0200)]
stmmac: intel: Enable correction of MAC propagation delay
All captured timestamps should be corrected by PHY, MAC and CDC introduced
latency/errors. The CDC correction is already used. Enable MAC propagation delay
correction as well which is available since commit
26cfb838aa00 ("net: stmmac:
correct MAC propagation delay").
Before:
|ptp4l[390.458]: rms 7 max 21 freq +177 +/- 14 delay 357 +/- 1
After:
|ptp4l[620.012]: rms 7 max 20 freq +195 +/- 14 delay 345 +/- 1
Tested on Intel Elkhart Lake.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Johannes Zink <j.zink@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 18 Aug 2023 09:40:39 +0000 (09:40 +0000)]
net: add skb_queue_purge_reason and __skb_queue_purge_reason
skb_queue_purge() and __skb_queue_purge() become wrappers
around the new generic functions.
New SKB_DROP_REASON_QUEUE_PURGE drop reason is added,
but users can start adding more specific reasons.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 19 Aug 2023 11:46:53 +0000 (12:46 +0100)]
Merge branch 'smc-features'
Guangguan Wang says:
====================
net/smc: several features's implementation for smc v2.1
This patch set implement several new features in SMC v2.1(https://
www.ibm.com/support/pages/node/
7009315), including vendor unique
experimental options, max connections per lgr negotiation, max links
per lgr negotiation.
v1 - v2:
- rename field fce_v20 to fce_v2_base in struct
smc_clc_first_contact_ext_v2x
- use smc_get_clc_first_contact_ext in smc_connect
_rdma_v2_prepare
- adding comment about field vendor_oui in struct
smc_clc_msg_smcd
- remove comment about SMC_CONN_PER_LGR_MAX in smc_
clc_srv_v2x_features_validate
- rename smc_clc_clnt_v2x_features_validate
RFC v2 - v1:
- more description in commit message
- modify SMC_CONN_PER_LGR_xxx and SMC_LINKS_ADD_LNK_xxx
macro defination and usage
- rename field release_ver to release_nr
- remove redundant release version check in client
- explicitly set the rc value in smc_llc_cli/srv_add_link
RFC v1 - RFC v2:
- Remove ini pointer NULL check and fix code style in
smc_clc_send_confirm_accept.
- Optimize the max_conns check in smc_clc_xxx_v2x_features_validate.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangguan Wang [Thu, 17 Aug 2023 13:20:32 +0000 (21:20 +0800)]
net/smc: Extend SMCR v2 linkgroup netlink attribute
Add SMC_NLA_LGR_R_V2_MAX_CONNS and SMC_NLA_LGR_R_V2_MAX_LINKS
to SMCR v2 linkgroup netlink attribute SMC_NLA_LGR_R_V2 for
linkgroup's detail info showing.
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangguan Wang [Thu, 17 Aug 2023 13:20:31 +0000 (21:20 +0800)]
net/smc: support max links per lgr negotiation in clc handshake
Support max links per lgr negotiation in clc handshake for SMCR v2.1,
which is one of smc v2.1 features. Server makes decision for the final
value of max links based on the client preferred max links and
self-preferred max links. Here use the minimum value of the client
preferred max links and server preferred max links.
Client Server
Proposal(max links(client preferred))
-------------------------------------->
Accept(max links(accepted value))
accepted value=min(client preferred, server preferred)
<-------------------------------------
Confirm(max links(accepted value))
------------------------------------->
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangguan Wang [Thu, 17 Aug 2023 13:20:30 +0000 (21:20 +0800)]
net/smc: support max connections per lgr negotiation
Support max connections per lgr negotiation for SMCR v2.1,
which is one of smc v2.1 features. Server makes decision for
the final value of max conns based on the client preferred
max conns and self-preferred max conns. Here use the minimum
value of client preferred max conns and server preferred max
conns.
Client Server
Proposal(max conns(client preferred))
------------------------------------>
Accept(max conns(accepted value))
accepted value=min(client preferred, server preferred)
<-----------------------------------
Confirm(max conns(accepted value))
----------------------------------->
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangguan Wang [Thu, 17 Aug 2023 13:20:29 +0000 (21:20 +0800)]
net/smc: support smc v2.x features validate
Support SMC v2.x features validate for SMC v2.1. This is the frame
code for SMC v2.x features validate, and will take effects only when
the negotiated release version is v2.1 or later.
For Server, v2.x features' validation should be done in smc_clc_srv_
v2x_features_validate when receiving v2.1 or later CLC Proposal Message,
such as max conns, max links negotiation, the decision of the final
value of max conns and max links should be made in this function.
And final check for server when receiving v2.1 or later CLC Confirm
Message should be done in smc_clc_v2x_features_confirm_check.
For client, v2.x features' validation should be done in smc_clc_clnt_
v2x_features_validate when receiving v2.1 or later CLC Accept Message,
for example, the decision to accpt the accepted value or to decline
should be made in this function.
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangguan Wang [Thu, 17 Aug 2023 13:20:28 +0000 (21:20 +0800)]
net/smc: add vendor unique experimental options area in clc handshake
Add vendor unique experimental options area in clc handshake. In clc
accept and confirm msg, vendor unique experimental options use the
16-Bytes reserved field, which defined in struct smc_clc_fce_gid_ext
in previous version. Because of the struct smc_clc_first_contact_ext
is widely used and limit the scope of modification, this patch moves
the 16-Bytes reserved field out of struct smc_clc_fce_gid_ext, and
followed with the struct smc_clc_first_contact_ext in a new struct
names struct smc_clc_first_contact_ext_v2x.
For SMC-R first connection, in previous version, the struct smc_clc_
first_contact_ext and the 16-Bytes reserved field has already been
included in clc accept and confirm msg. Thus, this patch use struct
smc_clc_first_contact_ext_v2x instead of the struct smc_clc_first_
contact_ext and the 16-Bytes reserved field in SMC-R clc accept and
confirm msg is compatible with previous version.
For SMC-D first connection, in previous version, only the struct smc_
clc_first_contact_ext is included in clc accept and confirm msg, and
the 16-Bytes reserved field is not included. Thus, when the negotiated
smc release version is the version before v2.1, we still use struct
smc_clc_first_contact_ext for compatible consideration. If the negotiated
smc release version is v2.1 or later, use struct smc_clc_first_contact_
ext_v2x instead.
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>