OSDN Git Service
Thomas Helland [Wed, 7 Jun 2017 18:46:05 +0000 (20:46 +0200)]
nir: Delete nir_array.h
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Thomas Helland [Wed, 7 Jun 2017 18:45:41 +0000 (20:45 +0200)]
nir: Port to u_dynarray
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Thomas Helland [Wed, 7 Jun 2017 18:45:14 +0000 (20:45 +0200)]
nir: Remove unused include
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Thomas Helland [Thu, 1 Jun 2017 21:15:43 +0000 (23:15 +0200)]
util: Port nir_array functionality to u_dynarray
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Thomas Helland [Thu, 1 Jun 2017 20:38:59 +0000 (22:38 +0200)]
util: Remove unused includes and convert to lower-case memory ops
Also, prepare for the next commit by correcting some coding style
changes. This should be all non-functional changes.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Thomas Helland [Thu, 1 Jun 2017 20:21:19 +0000 (22:21 +0200)]
util: Move u_dynarray to src/util
This will be used as the basis for unification
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Thomas Helland [Thu, 1 Jun 2017 20:52:02 +0000 (22:52 +0200)]
gallium: Add missing includes
These will need to be in place to avoid regressions when
removing these includes from the u_dynarray
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Marek Olšák [Mon, 5 Jun 2017 10:55:14 +0000 (12:55 +0200)]
radeonsi: update clip_regs on shader state changes only when it's needed
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Mon, 5 Jun 2017 10:54:18 +0000 (12:54 +0200)]
radeonsi: precompute some fields for PA_CL_VS_OUT_CNTL in si_shader_selector
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Sat, 27 May 2017 17:17:27 +0000 (19:17 +0200)]
radeonsi: add a new helper si_get_vs
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Samuel Pitoiset [Tue, 30 May 2017 20:36:28 +0000 (22:36 +0200)]
radeonsi: isolate real framebuffer changes from the decompression passes (v3)
When a stencil buffer is part of the framebuffer state, it is
decompressed but because it's bindless, all draw calls set
stencil_dirty_level_mask to 1.
v2: Marek - set the flags outside the loop
- also clear and set framebuffer.do_update_surf_dirtiness there
- do it in the DB->CB copy path too
v3: Marek - save and restore the do_update_surf_dirtiness flag
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Sat, 3 Jun 2017 11:59:03 +0000 (13:59 +0200)]
radeonsi: do EarlyCSEMemSSA LLVM pass
so that LLVM IR looks like CSE has been run on it. It's also recommended
by the instruction combining pass.
This also fixes:
- GL45-CTS.arrays_of_arrays_gl.InteractionFunctionCalls2 (crash)
- piglit/spec/arb_shader_ballot/execution/fs-readFirstInvocation-uint-loop (fail)
The code size decrease is positive, the register usage isn't. There is
a decrease in VGPR spilling for Tomb Raider, but increase in DiRT Showdown
and GRID Autosport.
EarlyCSEMemSSA has a -0.01% change in code size compared EarlyCSE.
SGPRS:
1935420 ->
1938076 (0.14 %)
VGPRS:
1645504 ->
1645988 (0.03 %)
Spilled SGPRs: 2493 -> 2651 (6.34 %)
Spilled VGPRs: 107 -> 115 (7.48 %)
Private memory VGPRs: 1332 -> 1332 (0.00 %)
Scratch size: 1512 -> 1516 (0.26 %) dwords per thread
Code Size:
61981592 ->
61890012 (-0.15 %) bytes
Max Waves: 371847 -> 371798 (-0.01 %)
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Thu, 1 Jun 2017 20:37:25 +0000 (22:37 +0200)]
radeonsi: remove 8 bytes from si_shader_key
We can use a union in si_shader_key::mono.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Sun, 28 May 2017 22:40:39 +0000 (00:40 +0200)]
radeonsi: move PSIZE and CLIPDIST unique IO indices after GENERIC
Heaven LDS usage for LS+HS is below. The masks are "outputs_written"
for LS and HS. Note that 32K is the maximum size.
Before:
heaven_x64: ls=1f1 tcs=1f1, lds=32K
heaven_x64: ls=31 tcs=31, lds=24K
heaven_x64: ls=71 tcs=71, lds=28K
After:
heaven_x64: ls=3f tcs=3f, lds=24K
heaven_x64: ls=7 tcs=7, lds=13K
heaven_x64: ls=f tcs=f, lds=17K
All other apps have a similar decrease in LDS usage, because
the "outputs_written" masks are similar. Also, most apps don't write
POSITION in these shader stages, so there is room for improvement.
(tight per-component input/output packing might help even more)
It's unknown whether this improves performance.
Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Thomas Hellstrom [Tue, 30 May 2017 13:54:38 +0000 (15:54 +0200)]
svga: Always set the alpha value to 1 when sampling using an XRGB view
If the XRGB view is sampling from an ARGB svga format, change
PIPE_SWIZZLE_W to PIPE_SWIZZLE_1 for all channels.
Previously we unconditionally set PIPE_SWIZZLE_1 on the alpha channel which
could be both insufficient and incorrect.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Thomas Hellstrom [Tue, 30 May 2017 13:51:06 +0000 (15:51 +0200)]
svga: Fix imported surface view creation
When deciding to create a view with or without an alpha channel we need to
look at the SVGA3D format and not the PIPE format.
This fixes the glx-tfp piglit test for dri3/xa.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Thomas Hellstrom [Wed, 26 Apr 2017 13:00:38 +0000 (06:00 -0700)]
svga: Set alpha to 1 for non-alpha views
Gallium RGB textures may be backed by imported ARGB svga3d surfaces. In those
and similar cases we need to set the alpha value to 1 when sampling.
Fixes piglit glx::glx-tfp
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Thomas Hellstrom [Tue, 30 May 2017 13:02:19 +0000 (15:02 +0200)]
svga: Allow format differences in 16-bit RGBA surface sharing
For the purpose of surface sharing, treat SVGA3D_R5G6B5 and
SVGA3D_B5G6R5_UNORM as identical formats.
This fixes the following piglit tests with dri3/xa:
glx@glx-visuals-depth -pixmap
glx@glx-visuals-stencil -pixmap
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Singh Rawat <drawat@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Thomas Hellstrom [Tue, 16 May 2017 14:25:12 +0000 (07:25 -0700)]
dri/vmwgfx: Disable a couple of glx extensions also for Ubuntu unity / compiz
It appears like the GLX_EXT_buffer_age extension also prevents Compiz /
Ubuntu Unity from performing partial buffer swaps when it otherwise
feels like doing so. So try to get them back again. We also disable
GLX_OML_sync_control since it appears it had a favourable impact on
gnome-shell.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Thomas Hellstrom [Fri, 5 May 2017 13:26:03 +0000 (06:26 -0700)]
dri: Turn of a couple of glx extensions for gnome-shell on vmwgfx.
Increases performance on vmwgfx since we're avoiding full buffer damage and
since we can't sync to vertical retrace anyway.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Thomas Hellstrom [Fri, 5 May 2017 13:06:07 +0000 (06:06 -0700)]
st/dri: Allow gallium drivers to turn off two GLX extensions
Allow gallium drivers to turn off GLX_EXT_buffer_age and
GLX_OML_sync_control if needed, using driconf.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Thomas Hellstrom [Fri, 5 May 2017 12:57:27 +0000 (05:57 -0700)]
dri: Optionally turn off a couple of GLX extensions based on driconf options
With GLX_EXT_buffer_age turned on, gnome-shell will use full-screen damage
with GLX, which severely hurts performance with architectures that emulate
page-flips with copies. Like vmware. We would like to be able to turn off that
extension. Similarly, typically the GLX_OML_sync_control doesn't make much
sense on a virtual architecture since we don't really sync to the host's
vertical retrace. We'd like to be able to turn it off as well.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Thomas Hellstrom [Fri, 5 May 2017 12:49:50 +0000 (05:49 -0700)]
st/dri: Allow dri users to query also driver options
There will be situations where we want to control, for example, the
GLX behaviour based on applications and drivers. So allow DRI users access
to the driver options.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Marek Olšák [Tue, 6 Jun 2017 14:28:59 +0000 (16:28 +0200)]
radeonsi: clean up decompress blend state names
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Tue, 6 Jun 2017 14:26:49 +0000 (16:26 +0200)]
gallium/radeon: clean up a misleading statement from the old days
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Mon, 5 Jun 2017 17:59:06 +0000 (19:59 +0200)]
radeonsi: don't use 1D tiling for Z/S on VI to get TC-compatible HTILE
It's always good to have fewer decompress blits.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Mon, 5 Jun 2017 17:51:38 +0000 (19:51 +0200)]
radeonsi: enable TC-compatible stencil compression on VI
Most things are in place. Ideally we won't see decompress blits for stencil
anymore.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Sun, 4 Jun 2017 23:22:45 +0000 (01:22 +0200)]
st/mesa: don't keep framebuffer state in st_context
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Sun, 4 Jun 2017 23:08:41 +0000 (01:08 +0200)]
st/mesa: cache pipe_surface for GL_FRAMEBUFFER_SRGB changes
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Sun, 4 Jun 2017 21:09:44 +0000 (23:09 +0200)]
st/mesa: use gl_driver_flags::NewFramebufferSRGB
also call st_init_driver_flags when st_context is initialized.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Sun, 4 Jun 2017 21:08:07 +0000 (23:08 +0200)]
mesa: add gl_driver_flags::NewFramebufferSRGB
_NEW_BUFFERS updates too much stuff.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Thu, 1 Jun 2017 17:02:16 +0000 (19:02 +0200)]
radeonsi/gfx9: prevent a race when the previous shader's main part is missing
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Thu, 1 Jun 2017 16:57:37 +0000 (18:57 +0200)]
radeonsi/gfx9: wait for main part compilation of 1st shaders of merged shaders
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Sat, 27 May 2017 16:49:11 +0000 (18:49 +0200)]
radeonsi/gfx9: fix LS scratch buffer support without TCS for GFX9
LS is merged into TCS. If there is no TCS, LS is merged into fixed-func
TCS. The problem is the fixed-func TCS was ignored by scratch update
functions, so LS didn't have the scratch buffer set up.
Note that Mesa 17.1 doesn't have merged shaders.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Sat, 27 May 2017 15:52:31 +0000 (17:52 +0200)]
radeonsi: move streamout state update out of si_update_shaders
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Wed, 31 May 2017 21:09:33 +0000 (23:09 +0200)]
radeonsi: remove dead code in declare_input_fs
Colors are interpolated in the PS prolog. This was never used.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Fri, 26 May 2017 23:22:25 +0000 (01:22 +0200)]
radeonsi: move handling of DBG_NO_OPT_VARIANT into si_shader_selector_key
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Wed, 31 May 2017 11:18:53 +0000 (13:18 +0200)]
radeonsi: use a compiler queue with a low priority for optimized shaders
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Wed, 31 May 2017 20:04:29 +0000 (22:04 +0200)]
util/u_queue: add an option to set the minimum thread priority
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Sat, 27 May 2017 10:13:34 +0000 (12:13 +0200)]
radeonsi: decrease the number of compiler threads to num CPUs - 1
Reserve one core for other things (like draw calls).
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Wed, 31 May 2017 16:02:54 +0000 (18:02 +0200)]
radeonsi: drop unfinished shader compilations when destroying shaders
If we enqueue too many jobs and destroy the GL context, it may take
several seconds before the jobs finish. Just drop them instead.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Wed, 31 May 2017 14:44:12 +0000 (16:44 +0200)]
util/u_queue: add a way to remove a job when we just want to destroy it
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Rob Clark [Tue, 6 Jun 2017 17:15:02 +0000 (13:15 -0400)]
freedreno/a5xx: set SP_BLEND_CONTROL properly
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Sat, 3 Jun 2017 17:36:25 +0000 (13:36 -0400)]
freedreno/a5xx: LRZ support
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Sat, 3 Jun 2017 16:53:15 +0000 (12:53 -0400)]
freedreno: drop timestamp field
unused.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Sat, 3 Jun 2017 16:42:35 +0000 (12:42 -0400)]
freedreno/a5xx: refactor out helper for LRZ flush
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Sat, 3 Jun 2017 16:34:28 +0000 (12:34 -0400)]
freedreno: reshuffle FD_MESA_DEBUG bitmask
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Sat, 3 Jun 2017 16:30:36 +0000 (12:30 -0400)]
freedreno: update generated headers
Signed-off-by: Rob Clark <robdclark@gmail.com>
Marek Olšák [Tue, 30 May 2017 21:52:07 +0000 (23:52 +0200)]
gallium/u_blitter: use 2D_ARRAY for cubemap blits if possible
so that we can use TXF.
The cubemap blit pixel shader code size: 148 -> 92 bytes
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Tue, 30 May 2017 20:18:40 +0000 (22:18 +0200)]
gallium/u_blitter: use TXF if possible
This fixes piglit:
arb_texture_view-rendering-r32ui
TEX (image_sample) flushes denorms to 0 with FP32 textures on GCN, but such
a texture can contain integer data written using an integer render view.
If we do a transfer blit with TEX, denorms are flushed to 0. Luckily,
TXF (image_load) doesn't do that.
TXF also doesn't need to load the sampler state, so blit shaders don't have
to do s_load_dwordx4.
TXF doesn't do CLAMP_TO_EDGE, so it can only be used if the src box is
in bounds, or if we clamp manually (this commit doesn't).
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Tue, 30 May 2017 15:07:47 +0000 (17:07 +0200)]
gallium/u_blitter: use TEX_LZ if it's supported
The sampler views always have first_level == last_level.
Now radeonsi doesn't have to use the WQM. (a few SALU removed)
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Tue, 30 May 2017 17:24:17 +0000 (19:24 +0200)]
gallium/util: add _LZ and TXF options to simple shaders
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Tue, 30 May 2017 14:48:47 +0000 (16:48 +0200)]
gallium/ureg: add TEX/TXF_LZ opcodes to ureg
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Jason Ekstrand [Tue, 6 Jun 2017 00:10:24 +0000 (17:10 -0700)]
i965: Use BLORP for all HiZ ops
BLORP has been capable of doing gen8-style HiZ ops for a while now. We
might as well start using it. The one downside is that this may cause a
bit more state emission since we still re-emit most things for BLORP.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Jason Ekstrand [Tue, 6 Jun 2017 00:18:48 +0000 (17:18 -0700)]
blorp: Use FullSurfaceDepthandStencilClear for blorp_hiz_op
The blorp_hiz_op entrypoint always acts on a full subresource of a HiZ
buffer so we can just set the flag unconditionally.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Jason Ekstrand [Tue, 6 Jun 2017 00:05:02 +0000 (17:05 -0700)]
i965: Move the post-HiZ-clear flush/stall to intel_hiz_exec
This also changes it to be predicated so we only do the flush/stall on
clears and HiZ resolves. The docs only say it's needed for clears but
empirical evidence says it's also needed for HiZ resolves.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Jason Ekstrand [Mon, 5 Jun 2017 21:19:28 +0000 (14:19 -0700)]
intel/blorp: Plumb through access to the workaround BO
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101283
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Nanley Chery [Thu, 27 Apr 2017 23:22:03 +0000 (16:22 -0700)]
anv/blorp: Move the depth cache flush outside of BLORP
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Jason Ekstrand [Mon, 5 Jun 2017 18:32:19 +0000 (11:32 -0700)]
intel/blorp: Refactor the HiZ op interface
This commit does a few things:
1) Now that BLORP can do HiZ ops on gen8+, drop the gen6 prefix.
2) Switch parameters to uint32_t to match the rest of blorp.
3) Take a range of layers and loop internally.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Jason Ekstrand [Mon, 5 Jun 2017 18:30:14 +0000 (11:30 -0700)]
i965/blorp: Inline gen6_blorp_exec
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Jason Ekstrand [Mon, 5 Jun 2017 18:52:32 +0000 (11:52 -0700)]
i965: Perform HiZ flush/stall prior to HiZ resolves
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Jason Ekstrand [Mon, 5 Jun 2017 18:49:24 +0000 (11:49 -0700)]
i965: Move the pre-depth-clear flush/stalls to intel_hiz_exec
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Jason Ekstrand [Mon, 5 Jun 2017 18:46:22 +0000 (11:46 -0700)]
i965/blorp: Take a layer range in intel_hiz_exec
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Jason Ekstrand [Sat, 20 May 2017 22:00:42 +0000 (15:00 -0700)]
i965/miptree: Store fast clear colors in an isl_color_value
This commit, out of necessity, makes a number of changes at once:
1) Changes intel_mipmap_tree to store the clear color for both color
and depth as an isl_color_value.
2) Changes the depth/stencil emit code to do the format conversion of
the depth clear value on Haswell and earlier instead of pulling a
uint32_t directly from the miptree.
3) Changes ISL's depth/stencil emit code to perform the format
conversion of the depth clear value on Haswell and earlier instead
of assuming that the depth value in the float is pre-converted.
4) Changes blorp to pass the depth value through as a float.
5) Changes the Vulkan driver to pass the depth value to blorp as a
float rather than a uint.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Thomas Hellstrom [Thu, 1 Jun 2017 10:04:05 +0000 (12:04 +0200)]
dri3/GLX: Fix drawable invalidation v2
A number of internal VMware apitrace traces image comparisons fail with
dri3 because the viewport transformation becomes incorrect after an X
drawable resize. The incorrect viewport transformation sometimes persist
until the second draw-call after a swapBuffer.
Comparing with the dri2 glx code there are a couple of places where dri2
invalidates the drawable in the absence of server-triggered invalidation,
where dri3 doesn't do that. When these invalidation points are added to
dri3, the image comparisons become correct.
v2:
Addressed review comment by Michel Dänzer.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-and-tested-by: Michel Dänzer <michel.daenzer@amd.com>
Kenneth Graunke [Tue, 30 May 2017 05:07:07 +0000 (22:07 -0700)]
i965: Fix alpha to one with dual color blending.
The BLEND_STATE documentation says that alpha to one must be disabled
when dual color blending is enabled. However, it appears that it simply
fails to override src1 alpha to one.
We can work around this by leaving alpha to one enabled, but overriding
SRC1_ALPHA to ONE and ONE_MINUS_SRC1_ALPHA to ZERO. This appears to be
what the other driver does, and it looks like it works despite the
documentation saying not to do it.
Fixes spec/ext_framebuffer_multisample/alpha-to-one-dual-src-blend *
Piglit tests.
v2: Add UNUSED to shut up warning on generations which don't use this.
Reviewed-by: Chris Forbes <chrisforbes@google.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Samuel Pitoiset [Thu, 1 Jun 2017 10:43:24 +0000 (12:43 +0200)]
mesa: add KHR_no_error support for glTexSubImage*D()
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Thu, 1 Jun 2017 10:36:06 +0000 (12:36 +0200)]
mesa: add texsubimage() helper
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Mon, 5 Jun 2017 12:02:14 +0000 (14:02 +0200)]
mesa: make _mesa_texture_sub_image() static
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Thu, 1 Jun 2017 10:35:34 +0000 (12:35 +0200)]
mesa: rename texsubimage() to texsubimage_err()
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Thu, 1 Jun 2017 09:46:24 +0000 (11:46 +0200)]
mesa: add KHR_no_error support for glCopyImageSubData()
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Thu, 1 Jun 2017 09:42:39 +0000 (11:42 +0200)]
mesa: add copy_image_subdata() helper
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Thu, 1 Jun 2017 09:36:13 +0000 (11:36 +0200)]
mesa: add prepare_target() helper
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Thu, 1 Jun 2017 09:35:25 +0000 (11:35 +0200)]
mesa: rename prepare_target() to prepare_target_err()
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Wed, 31 May 2017 13:57:45 +0000 (15:57 +0200)]
mesa: add KHR_no_error support for glBlitNamedFramebuffer()
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Mon, 5 Jun 2017 12:18:41 +0000 (14:18 +0200)]
mesa: add blit_named_framebuffer() helper
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Wed, 31 May 2017 13:52:57 +0000 (15:52 +0200)]
mesa: add KHR_no_error support for glBlitFramebuffer()
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Mon, 5 Jun 2017 13:32:08 +0000 (15:32 +0200)]
mesa: add validate_depth_buffer() helper
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Mon, 5 Jun 2017 13:29:37 +0000 (15:29 +0200)]
mesa: add validate_stencil_buffer() helper
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Mon, 5 Jun 2017 13:12:36 +0000 (15:12 +0200)]
mesa: add validate_color_buffer() helper
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Tue, 6 Jun 2017 12:32:08 +0000 (14:32 +0200)]
mesa: wrap blit_framebuffer() into blit_framebuffer_err()
Also add ALWAYS_INLINE to blit_framebuffer().
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Mon, 5 Jun 2017 13:03:30 +0000 (15:03 +0200)]
mesa: add 'no_error' parameter to blit_framebuffer()
The whole GLES3 block has been moved before the buffer validation
checks.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Wed, 31 May 2017 13:41:30 +0000 (15:41 +0200)]
mesa: make _mesa_blit_framebuffer() static
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Wed, 31 May 2017 12:26:20 +0000 (14:26 +0200)]
mesa: add KHR_no_error support for glBindBuffer()
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Wed, 31 May 2017 12:18:00 +0000 (14:18 +0200)]
mesa: add KHR_no_error support for glInvalidateBufferData()
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Wed, 31 May 2017 12:15:37 +0000 (14:15 +0200)]
mesa: add KHR_no_error support for glInvalidateBufferSubData()
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Wed, 31 May 2017 12:14:55 +0000 (14:14 +0200)]
mesa: add invalidate_buffer_subdata() helper
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Wed, 31 May 2017 10:42:39 +0000 (12:42 +0200)]
mesa: add KHR_no_error support for glBindVertexBuffers()
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Wed, 31 May 2017 10:39:44 +0000 (12:39 +0200)]
mesa: add KHR_no_error support for glVertexArrayVertexBuffers()
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Wed, 31 May 2017 10:35:25 +0000 (12:35 +0200)]
mesa: add vertex_array_vertex_buffers_err() helper
This also adds a 'no_error' parameter to vertex_array_vertex_buffer()
to be used in a following patch.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Tue, 6 Jun 2017 19:58:29 +0000 (21:58 +0200)]
mesa: add KHR_no_error support for glScissor*()
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Tue, 6 Jun 2017 19:58:28 +0000 (21:58 +0200)]
mesa: add scissor() and scissor_array() helpers
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Tue, 6 Jun 2017 19:58:27 +0000 (21:58 +0200)]
mesa: rename ScissorIndexed() to scissor_indexed_err()
And move GET_CURRENT_CONTEXT() into the APIENTRY calls
for consistency.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Tue, 6 Jun 2017 19:58:26 +0000 (21:58 +0200)]
mesa: use _mesa_set_scissor() in ScissorIndexed()
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Tue, 6 Jun 2017 19:58:25 +0000 (21:58 +0200)]
mesa: make _mesa_scissor_bounding_box() static
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Tue, 6 Jun 2017 20:58:13 +0000 (22:58 +0200)]
mesa: inline update_image_transfer_state() into _mesa_update_pixel()
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Samuel Pitoiset [Tue, 6 Jun 2017 20:58:12 +0000 (22:58 +0200)]
mesa: remove useless check in _mesa_update_pixel()
The only caller is _mesa_update_state_locked() which already
checks if _NEW_PIXEL is set before calling _mesa_update_pixel().
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Iago Toral Quiroga [Tue, 30 May 2017 11:25:35 +0000 (13:25 +0200)]
glcpp: fix #undef to match latest spec update and GLSLang implementation
GLSL ES spec includes the following:
"It is an error to undefine or to redefine a built-in
(pre-defined) macro name."
But desktop GLSL doesn't. This has sparked some discussion
in Khronos, and the final conclusion was to update the
GLSL 4.50 spec to include the following:
"By convention, all macro names containing two consecutive
underscores ( __ ) are reserved for use by underlying
software layers. Defining or undefining such a name in a
shader does not itself result in an error, but may result
in unintended behaviors that stem from having multiple
definitions of the same name. All macro names prefixed
with “GL_” (“GL” followed by a single underscore) are also
reserved, and defining or undefining such a name results in
a compile-time error."
In other words, undefining GL_* names should be an error, but
undefining other names with a double underscore in them is
not strictly prohibited in desktop GLSL.
This patch fixes the preprocessor to apply these rules,
following exactly the implementation already present
in GLSLang. This fixes some tests in CTS.
Khronos bug:
https://cvs.khronos.org/bugzilla/show_bug.cgi?id=16003
Fixes:
KHR-GL45.shaders.preprocessor.definitions.undefine_core_profile_vertex
KHR-GL45.shaders.preprocessor.definitions.undefine_core_profile_fragment
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Dave Airlie [Mon, 5 Jun 2017 20:20:33 +0000 (21:20 +0100)]
ac/nir: move gpr counting inside argument handling.
This just moves this code in here to it's cleaner.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 5 Jun 2017 20:11:05 +0000 (21:11 +0100)]
ac/nir: assign argument param pointers in one place.
Instead of having the fragile code to do a second pass, just
give the pointers you want params in to the initial code,
then call a later pass to assign them.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>