OSDN Git Service
David Howells [Wed, 27 Sep 2006 08:50:19 +0000 (01:50 -0700)]
[PATCH] NOMMU: Permit ptrace to ignore non-PROT_WRITE VMAs in NOMMU mode
Permit ptrace to modify a section that's non-shared but is marked
unwritable, such as is obtained by mapping the text segment of an ELF-FDPIC
executable binary with into a binary that's being ptraced[*].
[*] Under NOMMU conditions ptrace causes read-only MAP_PRIVATE mmaps to become
totally private copies because if a private mapping was actually shared
then the debugging setting breakpoints in it would potentially crash
other processes.
This is done by using the VM_MAYWRITE flag rather than the VM_WRITE flag
when deciding whether to permit a write.
Without this patch a debugger can't set breakpoints in the mapped text
sections of executables that are mapped read-only private, even if the
mmap() syscall has taken a private copy because PT_PTRACED is set.
In addition, VM_MAYREAD is used instead of VM_READ for similar reasons.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
David Howells [Wed, 27 Sep 2006 08:50:18 +0000 (01:50 -0700)]
[PATCH] NOMMU: Check VMA protections
Check the VMA protections in get_user_pages() against what's being asked.
This checks to see that we don't accidentally write on a non-writable VMA or
permit an I/O mapping VMA to be accessed (which may lack page structs).
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Sonic Zhang [Wed, 27 Sep 2006 08:50:17 +0000 (01:50 -0700)]
[PATCH] Check if start address is in vma region in NOMMU function get_user_pages()
In NOMMU arch, if run "cat /proc/self/mem", data from physical address 0
are read. This behavior is different from MMU arch. In IA32, message
"cat: /proc/self/mem: Input/output error" is reported.
This issue is rootcaused by not validate the start address in NOMMU
function get_user_pages(). Following patch solves this issue.
Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
David Howells [Wed, 27 Sep 2006 08:50:16 +0000 (01:50 -0700)]
[PATCH] NOMMU: Use find_vma() rather than reimplementing a VMA search
Use find_vma() in the NOMMU version of access_process_vm() rather than
reimplementing it.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
David Howells [Wed, 27 Sep 2006 08:50:16 +0000 (01:50 -0700)]
[PATCH] NOMMU: Set BDI capabilities for /dev/mem and /dev/kmem
Set the backing device info capabilities for /dev/mem and /dev/kmem to
permit direct sharing under no-MMU conditions and full mapping capabilities
under MMU conditions. Make the BDI used by these available to all directly
mappable character devices.
Also comment the capabilities for /dev/zero.
[akpm@osdl.org: ifdef reductions]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
David Howells [Wed, 27 Sep 2006 08:50:15 +0000 (01:50 -0700)]
[PATCH] NOMMU: Check that access_process_vm() has a valid target
Check that access_process_vm() is accessing a valid mapping in the target
process.
This limits ptrace() accesses and accesses through /proc/<pid>/maps to only
those regions actually mapped by a program.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Haavard Skinnemoen [Wed, 27 Sep 2006 08:50:14 +0000 (01:50 -0700)]
[PATCH] AVR32: Use unsigned long flags for saving interrupt state
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Rolf Eike Beer [Wed, 27 Sep 2006 08:50:13 +0000 (01:50 -0700)]
[PATCH] Mark __remove_vm_area() static
The function is exported but not used from anywhere else. It's also marked as
"not for driver use" so noone out there should really care.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Rolf Eike Beer [Wed, 27 Sep 2006 08:50:13 +0000 (01:50 -0700)]
[PATCH] Fix kerneldoc comments in mm/vmalloc.c
The empty line between the short description and the first argument
description causes a section to appear twice in the generated manpage.
Also the short description should really be short: the script can't handle
multiple lines.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Randy Dunlap [Wed, 27 Sep 2006 08:50:12 +0000 (01:50 -0700)]
[PATCH] mm/page_alloc: use NULL instead of 0 for ptr
Use NULL instead of 0 for pointer value, eliminate sparse warnings.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jes Sorensen [Wed, 27 Sep 2006 08:50:11 +0000 (01:50 -0700)]
[PATCH] mspec driver
Implement the special memory driver (mspec) based on the do_no_pfn
approach. The driver is currently used only on SN2 hardware with special
fetchop support but could be beneficial on other architectures using the
uncached mode.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jes Sorensen [Wed, 27 Sep 2006 08:50:10 +0000 (01:50 -0700)]
[PATCH] do_no_pfn()
Implement do_no_pfn() for handling mapping of memory without a struct page
backing it. This avoids creating fake page table entries for regions which
are not backed by real memory.
This feature is used by the MSPEC driver and other users, where it is
highly undesirable to have a struct page sitting behind the page (for
instance if the page is accessed in cached mode via the struct page in
parallel to the the driver accessing it uncached, which can result in data
corruption on some architectures, such as ia64).
This version uses specific NOPFN_{SIGBUS,OOM} return values, rather than
expect all negative pfn values would be an error. It also bugs on cow
mappings as this would not work with the VM.
[akpm@osdl.org: micro-optimise]
Signed-off-by: Jes Sorensen <jes@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Christoph Lameter [Wed, 27 Sep 2006 08:50:10 +0000 (01:50 -0700)]
[PATCH] zone_statistics: Use hot node instead of cold zone_pgdat
Now that we have the node in the hot zone of struct zone we can avoid
accessing zone_pgdat in zone_statistics.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Christoph Lameter [Wed, 27 Sep 2006 08:50:09 +0000 (01:50 -0700)]
[PATCH] Do not allocate pagesets for unpopulated zones.
We do not need to allocate pagesets for unpopulated zones.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Christoph Lameter [Wed, 27 Sep 2006 08:50:08 +0000 (01:50 -0700)]
[PATCH] Add node to zone for the NUMA case
Add the node in order to optimize zone_to_nid.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Christoph Lameter [Wed, 27 Sep 2006 08:50:08 +0000 (01:50 -0700)]
[PATCH] GFP_THISNODE for the slab allocator
This patch insures that the slab node lists in the NUMA case only contain
slabs that belong to that specific node. All slab allocations use
GFP_THISNODE when calling into the page allocator. If an allocation fails
then we fall back in the slab allocator according to the zonelists appropriate
for a certain context.
This allows a replication of the behavior of alloc_pages and alloc_pages node
in the slab layer.
Currently allocations requested from the page allocator may be redirected via
cpusets to other nodes. This results in remote pages on nodelists and that in
turn results in interrupt latency issues during cache draining. Plus the slab
is handing out memory as local when it is really remote.
Fallback for slab memory allocations will occur within the slab allocator and
not in the page allocator. This is necessary in order to be able to use the
existing pools of objects on the nodes that we fall back to before adding more
pages to a slab.
The fallback function insures that the nodes we fall back to obey cpuset
restrictions of the current context. We do not allocate objects from outside
of the current cpuset context like before.
Note that the implementation of locality constraints within the slab allocator
requires importing logic from the page allocator. This is a mischmash that is
not that great. Other allocators (uncached allocator, vmalloc, huge pages)
face similar problems and have similar minimal reimplementations of the basic
fallback logic of the page allocator. There is another way of implementing a
slab by avoiding per node lists (see modular slab) but this wont work within
the existing slab.
V1->V2:
- Use NUMA_BUILD to avoid #ifdef CONFIG_NUMA
- Exploit GFP_THISNODE being 0 in the NON_NUMA case to avoid another
#ifdef
[akpm@osdl.org: build fix]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Christoph Lameter [Wed, 27 Sep 2006 08:50:07 +0000 (01:50 -0700)]
[PATCH] Disable GFP_THISNODE in the non-NUMA case
GFP_THISNODE must be set to 0 in the non numa case otherwise we disable retry
and warnings for failing allocations in the SMP and UP case.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Christoph Lameter [Wed, 27 Sep 2006 08:50:06 +0000 (01:50 -0700)]
[PATCH] Add NUMA_BUILD definition in kernel.h to avoid #ifdef CONFIG_NUMA
The NUMA_BUILD constant is always available and will be set to 1 on
NUMA_BUILDs. That way checks valid only under CONFIG_NUMA can easily be done
without #ifdef CONFIG_NUMA
F.e.
if (NUMA_BUILD && <numa_condition>) {
...
}
[akpm: not a thing we'd normally do, but CONFIG_NUMA is special: it is
causing ifdef explosion in core kernel, so let's see if this is a comfortable
way in whcih to control that]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jes Sorensen [Wed, 27 Sep 2006 08:50:05 +0000 (01:50 -0700)]
[PATCH] Condense output of show_free_areas()
On larger systems, the amount of output dumped on the console when you do
SysRq-M is beyond insane. This patch is trying to reduce it somewhat as
even with the smaller NUMA systems that have hit the desktop this seems to
be a fair thing to do.
The philosophy I have taken is as follows:
1) If a zone is empty, don't tell, we don't need yet another line
telling us so. The information is available since one can look up
the fact how many zones were initialized in the first place.
2) Put as much information on a line is possible, if it can be done
in one line, rahter than two, then do it in one. I tried to format
the temperature stuff for easy reading.
Change show_free_areas() to not print lines for empty zones. If no zone
output is printed, the zone is empty. This reduces the number of lines
dumped to the console in sysrq on a large system by several thousand lines.
Change the zone temperature printouts to use one line per CPU instead of
two lines (one hot, one cold). On a 1024 CPU, 1024 node system, this
reduces the console output by over a million lines of output.
While this is a bigger problem on large NUMA systems, it is also applicable
to smaller desktop sized and mid range NUMA systems.
Old format:
Mem-info:
Node 0 DMA per-cpu:
cpu 0 hot: high 42, batch 7 used:24
cpu 0 cold: high 14, batch 3 used:1
cpu 1 hot: high 42, batch 7 used:34
cpu 1 cold: high 14, batch 3 used:0
cpu 2 hot: high 42, batch 7 used:0
cpu 2 cold: high 14, batch 3 used:0
cpu 3 hot: high 42, batch 7 used:0
cpu 3 cold: high 14, batch 3 used:0
cpu 4 hot: high 42, batch 7 used:0
cpu 4 cold: high 14, batch 3 used:0
cpu 5 hot: high 42, batch 7 used:0
cpu 5 cold: high 14, batch 3 used:0
cpu 6 hot: high 42, batch 7 used:0
cpu 6 cold: high 14, batch 3 used:0
cpu 7 hot: high 42, batch 7 used:0
cpu 7 cold: high 14, batch 3 used:0
Node 0 DMA32 per-cpu: empty
Node 0 Normal per-cpu: empty
Node 0 HighMem per-cpu: empty
Node 1 DMA per-cpu:
[snip]
Free pages: 5410688kB (0kB HighMem)
Active:9536 inactive:4261 dirty:6 writeback:0 unstable:0 free:338168 slab:1931 mapped:1900 pagetables:208
Node 0 DMA free:1676304kB min:3264kB low:4080kB high:4896kB active:128048kB inactive:61568kB present:1970880kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA32 free:0kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 Normal free:0kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 HighMem free:0kB min:512kB low:512kB high:512kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 1 DMA free:1951728kB min:3280kB low:4096kB high:4912kB active:5632kB inactive:1504kB present:1982464kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
....
New format:
Mem-info:
Node 0 DMA per-cpu:
CPU 0: Hot: hi: 42, btch: 7 usd: 41 Cold: hi: 14, btch: 3 usd: 2
CPU 1: Hot: hi: 42, btch: 7 usd: 40 Cold: hi: 14, btch: 3 usd: 1
CPU 2: Hot: hi: 42, btch: 7 usd: 0 Cold: hi: 14, btch: 3 usd: 0
CPU 3: Hot: hi: 42, btch: 7 usd: 0 Cold: hi: 14, btch: 3 usd: 0
CPU 4: Hot: hi: 42, btch: 7 usd: 0 Cold: hi: 14, btch: 3 usd: 0
CPU 5: Hot: hi: 42, btch: 7 usd: 0 Cold: hi: 14, btch: 3 usd: 0
CPU 6: Hot: hi: 42, btch: 7 usd: 0 Cold: hi: 14, btch: 3 usd: 0
CPU 7: Hot: hi: 42, btch: 7 usd: 0 Cold: hi: 14, btch: 3 usd: 0
Node 1 DMA per-cpu:
[snip]
Free pages: 5411088kB (0kB HighMem)
Active:9558 inactive:4233 dirty:6 writeback:0 unstable:0 free:338193 slab:1942 mapped:1918 pagetables:208
Node 0 DMA free:1677648kB min:3264kB low:4080kB high:4896kB active:129296kB inactive:58864kB present:1970880kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 1 DMA free:1948448kB min:3280kB low:4096kB high:4912kB active:6864kB inactive:3536kB present:1982464kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Christoph Lameter [Wed, 27 Sep 2006 08:50:03 +0000 (01:50 -0700)]
[PATCH] slab: fix kmalloc_node applying memory policies if nodeid == numa_node_id()
kmalloc_node() falls back to ___cache_alloc() under certain conditions and
at that point memory policies may be applied redirecting the allocation
away from the current node. Therefore kmalloc_node(...,numa_node_id()) or
kmalloc_node(...,-1) may not return memory from the local node.
Fix this by doing the policy check in __cache_alloc() instead of
____cache_alloc().
This version here is a cleanup of Kiran's patch.
- Tested on ia64.
- Extra material removed.
- Consolidate the exit path if alternate_node_alloc() returned an object.
[akpm@osdl.org: warning fix]
Signed-off-by: Alok N Kataria <alok.kataria@calsoftinc.com>
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Nick Piggin [Wed, 27 Sep 2006 08:50:02 +0000 (01:50 -0700)]
[PATCH] page invalidation cleanup
Clean up the invalidate code, and use a common function to safely remove
the page from pagecache.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Heiko Carstens [Wed, 27 Sep 2006 08:50:01 +0000 (01:50 -0700)]
[PATCH] own header file for struct page
This moves the definition of struct page from mm.h to its own header file
page-struct.h. This is a prereq to fix SetPageUptodate which is broken on
s390:
#define SetPageUptodate(_page)
do {
struct page *__page = (_page);
if (!test_and_set_bit(PG_uptodate, &__page->flags))
page_test_and_clear_dirty(_page);
} while (0)
_page gets used twice in this macro which can cause subtle bugs. Using
__page for the page_test_and_clear_dirty call doesn't work since it causes
yet another problem with the page_test_and_clear_dirty macro as well.
In order to avoid all these problems caused by macros it seems to be a good
idea to get rid of them and convert them to static inline functions.
Because of header file include order it's necessary to have a seperate
header file for the struct page definition.
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Wed, 27 Sep 2006 08:50:00 +0000 (01:50 -0700)]
[PATCH] vm: add per-zone writeout counter
The VM is supposed to minimise the number of pages which get written off the
LRU (for IO scheduling efficiency, and for high reclaim-success rates). But
we don't actually have a clear way of showing how true this is.
So add `nr_vmscan_write' to /proc/vmstat and /proc/zoneinfo - the number of
pages which have been written by the vm scanner in this zone and globally.
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mel Gorman [Wed, 27 Sep 2006 08:49:59 +0000 (01:49 -0700)]
[PATCH] Allow an arch to expand node boundaries
Arch-independent zone-sizing determines the size of a node
(pgdat->node_spanned_pages) based on the physical memory that was
registered by the architecture. However, when
CONFIG_MEMORY_HOTPLUG_RESERVE is set, the architecture expects that the
spanned_pages will be much larger and that mem_map will be allocated that
is used lated on memory hot-add.
This patch allows an architecture that sets CONFIG_MEMORY_HOTPLUG_RESERVE
to call push_node_boundaries() which will set the node beginning and end to
at *least* the requested boundary.
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mel Gorman [Wed, 27 Sep 2006 08:49:58 +0000 (01:49 -0700)]
[PATCH] Account for holes that are outside the range of physical memory
absent_pages_in_range() made the assumption that users of the API would not
care about holes beyound the end of physical memory. This was not the
case. This patch will account for ranges outside of physical memory as
holes correctly.
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mel Gorman [Wed, 27 Sep 2006 08:49:56 +0000 (01:49 -0700)]
[PATCH] Account for memmap and optionally the kernel image as holes
The x86_64 code accounted for memmap and some portions of the the DMA zone as
holes. This was because those areas would never be reclaimed and accounting
for them as memory affects min watermarks. This patch will account for the
memmap as a memory hole. Architectures may optionally use set_dma_reserve()
if they wish to account for a portion of memory in ZONE_DMA as a hole.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mel Gorman [Wed, 27 Sep 2006 08:49:54 +0000 (01:49 -0700)]
[PATCH] Have ia64 use add_active_range() and free_area_init_nodes
Size zones and holes in an architecture independent manner for ia64.
[bob.picco@hp.com: fix ia64 FLATMEM+VIRTUAL_MEM_MAP]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mel Gorman [Wed, 27 Sep 2006 08:49:52 +0000 (01:49 -0700)]
[PATCH] Have x86_64 use add_active_range() and free_area_init_nodes
Size zones and holes in an architecture independent manner for x86_64.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mel Gorman [Wed, 27 Sep 2006 08:49:51 +0000 (01:49 -0700)]
[PATCH] Have x86 use add_active_range() and free_area_init_nodes
Size zones and holes in an architecture independent manner for x86.
[akpm@osdl.org: build fix]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mel Gorman [Wed, 27 Sep 2006 08:49:49 +0000 (01:49 -0700)]
[PATCH] Have Power use add_active_range() and free_area_init_nodes()
Size zones and holes in an architecture independent manner for Power.
[judith@osdl.org: build fix]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mel Gorman [Wed, 27 Sep 2006 08:49:43 +0000 (01:49 -0700)]
[PATCH] Introduce mechanism for registering active regions of memory
At a basic level, architectures define structures to record where active
ranges of page frames are located. Once located, the code to calculate zone
sizes and holes in each architecture is very similar. Some of this zone and
hole sizing code is difficult to read for no good reason. This set of patches
eliminates the similar-looking architecture-specific code.
The patches introduce a mechanism where architectures register where the
active ranges of page frames are with add_active_range(). When all areas have
been discovered, free_area_init_nodes() is called to initialise the pgdat and
zones. The zone sizes and holes are then calculated in an architecture
independent manner.
Patch 1 introduces the mechanism for registering and initialising PFN ranges
Patch 2 changes ppc to use the mechanism - 139 arch-specific LOC removed
Patch 3 changes x86 to use the mechanism - 136 arch-specific LOC removed
Patch 4 changes x86_64 to use the mechanism - 74 arch-specific LOC removed
Patch 5 changes ia64 to use the mechanism - 52 arch-specific LOC removed
Patch 6 accounts for mem_map as a memory hole as the pages are not reclaimable.
It adjusts the watermarks slightly
Tony Luck has successfully tested for ia64 on Itanium with tiger_defconfig,
gensparse_defconfig and defconfig. Bob Picco has also tested and debugged on
IA64. Jack Steiner successfully boot tested on a mammoth SGI IA64-based
machine. These were on patches against 2.6.17-rc1 and release 3 of these
patches but there have been no ia64-changes since release 3.
There are differences in the zone sizes for x86_64 as the arch-specific code
for x86_64 accounts the kernel image and the starting mem_maps as memory holes
but the architecture-independent code accounts the memory as present.
The big benefit of this set of patches is a sizable reduction of
architecture-specific code, some of which is very hairy. There should be a
greater reduction when other architectures use the same mechanisms for zone
and hole sizing but I lack the hardware to test on.
Additional credit;
Dave Hansen for the initial suggestion and comments on early patches
Andy Whitcroft for reviewing early versions and catching numerous
errors
Tony Luck for testing and debugging on IA64
Bob Picco for fixing bugs related to pfn registration, reviewing a
number of patch revisions, providing a number of suggestions
on future direction and testing heavily
Jack Steiner and Robin Holt for testing on IA64 and clarifying
issues related to memory holes
Yasunori for testing on IA64
Andi Kleen for reviewing and feeding back about x86_64
Christian Kujau for providing valuable information related to ACPI
problems on x86_64 and testing potential fixes
This patch:
Define the structure to represent an active range of page frames within a node
in an architecture independent manner. Architectures are expected to register
active ranges of PFNs using add_active_range(nid, start_pfn, end_pfn) and call
free_area_init_nodes() passing the PFNs of the end of each zone.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Wed, 27 Sep 2006 08:49:42 +0000 (01:49 -0700)]
[PATCH] fix x86_64-mm-spinlock-cleanup
We need processor.h for cpu_relax().
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alexey Dobriyan [Wed, 27 Sep 2006 08:49:41 +0000 (01:49 -0700)]
[PATCH] Make kmem_cache_destroy() return void
un-, de-, -free, -destroy, -exit, etc functions should in general return
void. Also,
There is very little, say, filesystem driver code can do upon failed
kmem_cache_destroy(). If it will be decided to BUG in this case, BUG
should be put in generic code, instead.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alexey Dobriyan [Wed, 27 Sep 2006 08:49:40 +0000 (01:49 -0700)]
[PATCH] Really ignore kmem_cache_destroy return value
* Rougly half of callers already do it by not checking return value
* Code in drivers/acpi/osl.c does the following to be sure:
(void)kmem_cache_destroy(cache);
* Those who check it printk something, however, slab_error already printed
the name of failed cache.
* XFS BUGs on failed kmem_cache_destroy which is not the decision
low-level filesystem driver should make. Converted to ignore.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Panagiotis Issaris [Wed, 27 Sep 2006 08:49:39 +0000 (01:49 -0700)]
[PATCH] fs: Removing useless casts
* Removing useless casts
* Removing useless wrapper
* Conversion from kmalloc+memset to kzalloc
Signed-off-by: Panagiotis Issaris <takis@issaris.org>
Acked-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Panagiotis Issaris [Wed, 27 Sep 2006 08:49:37 +0000 (01:49 -0700)]
[PATCH] fs: Conversions from kmalloc+memset to k(z|c)alloc
Conversions from kmalloc+memset to kzalloc.
Signed-off-by: Panagiotis Issaris <takis@issaris.org>
Jffs2-bit-acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Eric Sandeen [Wed, 27 Sep 2006 08:49:36 +0000 (01:49 -0700)]
[PATCH] more ext3 16T overflow fixes
Some of the changes in balloc.c are just cosmetic, as Andreas pointed out -
if they overflow they'll then underflow and things are fine.
5th hunk actually fixes an overflow problem.
Also check for potential overflows in inode & block counts when resizing.
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Dave Kleikamp [Wed, 27 Sep 2006 08:49:36 +0000 (01:49 -0700)]
[PATCH] ext3: Fix sparse warnings
Fixing up some endian-ness warnings in preparation to clone ext4 from ext3.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Dave Kleikamp [Wed, 27 Sep 2006 08:49:35 +0000 (01:49 -0700)]
[PATCH] ext3: More whitespace cleanups
More white space cleanups in preparation of cloning ext4 from ext3.
Removing spaces that precede a tab.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Vasily Averin [Wed, 27 Sep 2006 08:49:33 +0000 (01:49 -0700)]
[PATCH] ext3: wrong error behavior
SWsoft Virtuozzo/OpenVZ Linux kernel team has discovered that ext3 error
behavior was broken in linux kernels since 2.5.x versions by the following
patch:
2002/10/31 02:15:26-05:00 tytso@snap.thunk.org
Default mount options from superblock for ext2/3 filesystems
http://linux.bkbits.net:8080/linux-2.6/gnupatch@3dc0d88eKbV9ivV4ptRNM8fBuA3JBQ
In case ext3 file system is mounted with errors=continue
(EXT3_ERRORS_CONTINUE) errors should be ignored when possible. However at
present in case of any error kernel aborts journal and remounts filesystem
to read-only. Such behavior was hit number of times and noted to differ
from that of 2.4.x kernels.
This patch fixes this:
- do nothing in case of EXT3_ERRORS_CONTINUE,
- set EXT3_MOUNT_ABORT and call journal_abort() in all other cases
- panic() should be called after ext3_commit_super() to save
sb marked as EXT3_ERROR_FS
Signed-off-by: Vasily Averin <vvs@sw.ru>
Acked-by: Kirill Korotaev <dev@sw.ru>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Stephen C. Tweedie" <sct@redhat.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mingming Cao [Wed, 27 Sep 2006 08:49:32 +0000 (01:49 -0700)]
[PATCH] ext3: more comments about block allocation/reservation code
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mingming Cao [Wed, 27 Sep 2006 08:49:32 +0000 (01:49 -0700)]
[PATCH] ext3: turn on reservation dump on block allocation errors
In the past there were a few kernel panics related to block reservation
tree operations failure (insert/remove etc). It would be very useful to
get the block allocation reservation map info when such error happens.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Eric Sandeen [Wed, 27 Sep 2006 08:49:31 +0000 (01:49 -0700)]
[PATCH] JBD: 16T fixes
These are a few places I've found in jbd that look like they may not be
16T-safe, or consistent with the use of unsigned longs for block
containers. Problems here would be somewhat hard to hit, would require
journal blocks past the 8T boundary, which would not be terribly common.
Still, should fix.
(some of these have come from the ext4 work on jbd as well).
I think there's one more possibility that the wrap() function may not be
safe IF your last block in the journal butts right up against the 232 block
boundary, but that seems like a VERY remote possibility, and I'm not
worrying about it at this point.
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Eric Sandeen [Wed, 27 Sep 2006 08:49:30 +0000 (01:49 -0700)]
[PATCH] ext3: inode numbers are unsigned long
This is primarily format string fixes, with changes to ialloc.c where large
inode counts could overflow, and also pass around journal_inum as an
unsigned long, just to be pedantic about it....
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Eric Sandeen [Wed, 27 Sep 2006 08:49:30 +0000 (01:49 -0700)]
[PATCH] ext2: fix mounts at 16T
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Eric Sandeen [Wed, 27 Sep 2006 08:49:29 +0000 (01:49 -0700)]
[PATCH] fix ext3 mounts at 16T
I need to do some actual IO testing now, but this gets things mounting for
a 16T ext3 filesystem. (patched up e2fsprogs is needed too, I'll send that
off the kernel list)
This patch fixes these issues in the kernel:
o sbi->s_groups_count overflows in ext3_fill_super()
sbi->s_groups_count = (le32_to_cpu(es->s_blocks_count) -
le32_to_cpu(es->s_first_data_block) +
EXT3_BLOCKS_PER_GROUP(sb) - 1) /
EXT3_BLOCKS_PER_GROUP(sb);
at 16T, s_blocks_count is already maxed out; adding
EXT3_BLOCKS_PER_GROUP(sb) overflows it and groups_count comes out to 0.
Not really what we want, and causes a failed mount.
Feel free to check my math (actually, please do!), but changing it this
way should work & avoid the overflow:
(A + B - 1)/B changed to: ((A - 1)/B) + 1
o ext3_check_descriptors() overflows range checks
ext3_check_descriptors() iterates over all block groups making sure
that various bits are within the right block ranges... on the last pass
through, it is checking the error case
[item] >= block + EXT3_BLOCKS_PER_GROUP(sb)
where "block" is the first block in the last block group. The last
block in this group (and the last one that will fit in 32 bits) is block
+ EXT3_BLOCKS_PER_GROUP(sb)- 1. block + EXT3_BLOCKS_PER_GROUP(sb) wraps
back around to 0.
so, make things clearer with "first_block" and "last_block" where those
are first and last, inclusive, and use <, > rather than <, >=.
Finally, the last block group may be smaller than the rest, so account
for this on the last pass through: last_block = sb->s_blocks_count - 1;
(a similar patch could be done for ext2; does anyone in their right mind
use ext2 at 16T? I'll send an ext2 patch doing the same thing if that's
warranted)
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alexey Dobriyan [Wed, 27 Sep 2006 08:49:28 +0000 (01:49 -0700)]
[PATCH] jbd: use BUILD_BUG_ON in journal init
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Stephen Tweedie <sct@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mingming Cao [Wed, 27 Sep 2006 08:49:27 +0000 (01:49 -0700)]
[PATCH] ext3 and jbd cleanup: remove whitespace
Remove whitespace from ext3 and jbd, before we clone ext4.
Signed-off-by: Mingming Cao<cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Josh Triplett [Wed, 27 Sep 2006 08:49:26 +0000 (01:49 -0700)]
[PATCH] jbd: add lock annotation to jbd_sync_bh
jbd_sync_bh releases journal->j_list_lock. Add a lock annotation to this
function so that sparse can check callers for lock pairing, and so that
sparse will not complain about this function since it intentionally uses
the lock in this manner.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
KAMEZAWA Hiroyuki [Wed, 27 Sep 2006 08:49:25 +0000 (01:49 -0700)]
[PATCH] fix "cpu to node relationship fixup: map cpu to node"
Fix build error introduced by
3212fe1594e577463bc8601d28aa008f520c3377
Non-NUMA case should be handled.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Wed, 27 Sep 2006 15:09:48 +0000 (08:09 -0700)]
Merge /pub/scm/linux/kernel/git/gregkh/i2c-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6: (30 commits)
i2c: Drop unimplemented slave functions
i2c: Constify i2c_algorithm declarations, part 2
i2c: Constify i2c_algorithm declarations, part 1
i2c: Let drivers constify i2c_algorithm data
i2c-isa: Restore driver owner
i2c-viapro: Add support for the VT8237A and VT8251
i2c: Warn on i2c client creation failure
i2c-core: Drop useless bitmaskings
i2c-algo-pcf: Discard the mdelay data struct member
i2c-algo-bit: Cleanups
i2c-isa: Fail adding driver on attach_adapter error
i2c: __must_check fixes (chip drivers)
i2c-dev: attach/detach_adapter cleanups
i2c-stub: Chip address as a module parameter
i2c: Plan i2c-isa for removal
i2c: New bus driver for TI OMAP boards
i2c-algo-bit: Discard the mdelay data struct member
i2c-matroxfb: Struct init conversion
i2c: Fix copy-n-paste in subsystem Kconfig
i2c-au1550: Add I2C support for Au1200
...
Linus Torvalds [Wed, 27 Sep 2006 15:09:15 +0000 (08:09 -0700)]
Merge /pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (28 commits)
pciehp - fix wrong return value
IA64: PCI: dont disable irq which is not enabled
acpiphp: add support for ioapic hot-remove
PCI: assign ioapic resource at hotplug
acpiphp: disable bridges
acpiphp: stop bus device before acpi_bus_trim
PCI: add pci_stop_bus_device
acpiphp: do not initialize existing ioapics
acpiphp: initialize ioapics before starting devices
acpiphp: set hpp values before starting devices
PCI Hotplug: cleanup pcihp skeleton code.
PCI: Restore PCI Express capability registers after PM event
PCI: drivers/pci/hotplug/acpiphp_glue.c: make a function static
PCI: Multiprobe sanitizer
PCI: fix __must_check warnings
PCI Hotplug: fix __must_check warnings
SHPCHP: fix __must_check warnings
PCI-Express AER implemetation: pcie_portdrv error handler
PCI-Express AER implemetation: AER core and aerdriver
PCI-Express AER implemetation: export pcie_port_bus_type
...
Franck Bui-Huu [Fri, 11 Aug 2006 15:51:53 +0000 (17:51 +0200)]
[MIPS] setup.c: use early_param() for early command line parsing
There's no point to rewrite some logic to parse command line
to pass initrd parameters or to declare a user memory area.
We could use instead parse_early_param() that does the same
thing.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Franck Bui-Huu [Fri, 11 Aug 2006 15:51:52 +0000 (17:51 +0200)]
[MIPS] setup.c: remove MAXMEM macro
It doesn't improve readability.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Franck Bui-Huu [Fri, 11 Aug 2006 15:51:51 +0000 (17:51 +0200)]
[MIPS] setup.c: do not inline functions
There's no point to inline any functions in setup.c. Let's GCC
doing its job, it's good enough for that now.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Franck Bui-Huu [Fri, 11 Aug 2006 15:51:50 +0000 (17:51 +0200)]
[MIPS] setup.c: remove useless includes.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Franck Bui-Huu [Fri, 11 Aug 2006 15:51:49 +0000 (17:51 +0200)]
[MIPS] setup.c: move initrd code inside dedicated functions
NUMA specific code could rely on them too.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Franck Bui-Huu [Fri, 11 Aug 2006 15:51:48 +0000 (17:51 +0200)]
[MIPS] setup.c: cleanup bootmem_init()
This function although doing simple thing is hard to follow. It's
mainly due to:
- a lot of #ifdef
- bad local names
- redundant tests
So this patch try to address these issues. It also do not use
max_pfn global which is marked as an unused exported symbol.
As a bonus side, it's now really easy to see what part of the
code is for no-numa system.
There's also no point to make this function inline.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Franck Bui-Huu [Fri, 18 Aug 2006 14:18:09 +0000 (16:18 +0200)]
[MIPS] get_wchan(): remove uses of mfinfo[64]
This array was used to 'cache' some frame info about scheduler
functions to speed up get_wchan(). This array was 1Ko size and
was only used when CONFIG_KALLSYMS was set but declared for all
configs.
Rather than make the array statement conditional, this patches
removes this array and its uses. Indeed the common case doesn't
seem to use this array and get_wchan() is not a critical path
anyways.
It results in a smaller bss and a smaller/cleaner code:
text data bss dec hex filename
2543808 254148 139296
2937252 2cd1a4 vmlinux-new-get-wchan
2544080 254148 143392
2941620 2ce2b4 vmlinux~old
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Franck Bui-Huu [Fri, 18 Aug 2006 14:18:08 +0000 (16:18 +0200)]
[MIPS] get_frame_info(): null function size means size is unknown
This patch adds 2 sanity checks.
The first one test that the start address of the function to analyze has been
set by the caller. If not return an error since nothing usefull can be done
without.
The second one checks that the function's size has been set. A null size can
happen if CONFIG_KALLSYMS is not set and it means that we don't know the size
of the function to analyze. In this case, we make it equal to 128 instructions
by default.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Franck Bui-Huu [Fri, 18 Aug 2006 14:18:07 +0000 (16:18 +0200)]
[MIPS] unwind_stack(): return ra if an exception occured at the first instruction
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Tue, 26 Sep 2006 02:07:22 +0000 (03:07 +0100)]
[MIPS] Enable tmpfs for anything that possibly runs a full distribution.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Mon, 25 Sep 2006 14:49:49 +0000 (15:49 +0100)]
[MIPS] s/__ASSEMBLER__/__ASSEMBLY__/ for clarity sake.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Sat, 23 Sep 2006 17:08:36 +0000 (18:08 +0100)]
[MIPS] Have headers_install install <asm/cachectl.h> and <asm/sysmips.h>.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Richard Sandiford [Sun, 17 Sep 2006 19:38:39 +0000 (20:38 +0100)]
[MIPS] fstatat syscall names
MIPS is the only port to call its fstatat()-related syscalls
"__NR_fstatat". Now I can see why that might be seen as every
other port being wrong, but I think for o32, it is at best confusing.
__NR_fstat provides a plain (32-bit) stat while __NR_fstatat provides a
64-bit stat. Changing the name to __NR_fstatat64 would make things more
explicit, match x86, and make the glibc port slightly easier.
The current name is more appropriate for n32 and n64, but it would be
appropriate for other 64-bit targets too, and those targets have chosen
to call it __NR_newfstatat instead. Using the same name for MIPS would
again be more consistent and make the glibc port slightly easier.
I'm not wedded to this idea if the current names are preferred,
but FWIW...
Signed-off-by: Richard Sandiford <richard@codesourcery.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Richard Sandiford [Sun, 17 Sep 2006 19:30:46 +0000 (20:30 +0100)]
[MIPS] The o32 fstatat syscall behaves differently on 32 and 64 bit kernels
While working on a glibc patch to support the fstatat() functions[1],
I noticed that the o32 implementation behaves differently on 32-bit and
64-bit kernels; the former provides a stat64 while the latter provides
a plain (o32) stat. I think the former is what's intended, as there is
no separate fstatat64. It's also what x86 does.
I think this is just a case of a compat too far.
[1] I've seen Khem's patch, but I don't think it's right.
Signed-off-by: Richard Sandiford <richard@codesourcery.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Wed, 20 Sep 2006 19:56:02 +0000 (20:56 +0100)]
[MIPS] Remove EV96100 as previously announced.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Fri, 8 Sep 2006 02:16:21 +0000 (04:16 +0200)]
[MIPS] Replace BARRIER with more appropriate hazard barrier.
This is the unchanged part 2 of Chris' hazard cleanup.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Fri, 8 Sep 2006 02:13:49 +0000 (04:13 +0200)]
[MIPS] Cleanup hazard handling.
Mostly based on patch by Chris Dearman and cleanups from Yoichi.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Thu, 7 Sep 2006 00:29:57 +0000 (02:29 +0200)]
[MIPS] IP27: Delete useless declaration of allocate_irqno().
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Peter Watkins [Wed, 23 Aug 2006 15:15:49 +0000 (11:15 -0400)]
[MIPS] Fix USER_PTRS_PER_PGD for 64K page size.
The code in pgtable-64.h assumes TASK_SIZE is always bigger than a first
level PGDIR_SIZE. This is not the case for 64K pages, where task size is
40 bits (1TB) and a pgd entry can map 42 bits. This leads to
USER_PTRS_PER_PGD being zero for 64K pages.
Signed-off-by: Peter Watkins <treestem@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
thomas@koeller.dyndns.org [Sun, 27 Aug 2006 11:51:48 +0000 (13:51 +0200)]
[MIPS] Add configuration variables for RM9xxx processor
This patch introduces a number of configuration variables. These allow to
specify presence/absence of integrated peripherals found on the MIPS
RM9xxx processor family, based on the particular processor model used.
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
thomas@koeller.dyndns.org [Sun, 27 Aug 2006 11:54:31 +0000 (13:54 +0200)]
[MIPS] Move excite_fpga.h to include/asm-mips/mach-excite
excite_fpga.h, like all platform headers, really belongs in the
platform header directory.
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
thomas@koeller.dyndns.org [Sun, 27 Aug 2006 11:53:16 +0000 (13:53 +0200)]
[MIPS] Suppress compiler warnings
The excite platform exports hardware resources for device drivers to use.
Any driver wanting to use these resources will look up them by their names.
Since these resources are declared to have static linkage, but are not
used in the source file defining them, the compiler used to emit an
'unused' warning, which this patch suppresses.
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Fri, 25 Aug 2006 11:34:33 +0000 (12:34 +0100)]
[MIPS] Reformat missformated SMTC bits.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Sat, 19 Aug 2006 15:33:38 +0000 (00:33 +0900)]
[MIPS] Qemu does not have D-cache aliases
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Yoichi Yuasa [Wed, 16 Aug 2006 14:10:00 +0000 (23:10 +0900)]
[MIPS] Remove F_SETSIG and F_GETSIG in favor of the asm-generic definitions.
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Fri, 4 Aug 2006 00:49:31 +0000 (01:49 +0100)]
[MIPS] Move definition of IRIX compat constant into IRIX compat code.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Yoichi Yuasa [Mon, 31 Jul 2006 14:01:37 +0000 (23:01 +0900)]
[MIPS] Use common definitions from asm-generic/signal.h
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Tue, 1 Aug 2006 22:39:42 +0000 (23:39 +0100)]
[MIPS] c-r4k: Convert init functions from inline to __init.
With more recent compilers inline doesn't necessarily means a function
will always be inlined. So leave that decission to the compiler and
make the function as __init.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Tue, 19 Sep 2006 16:18:53 +0000 (17:18 +0100)]
[MIPS] TLS: set_thread_area returns asmlinkage int not void.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Tue, 19 Sep 2006 16:16:56 +0000 (17:16 +0100)]
[MIPS] TLS: Delete unused sys32_set_thread_area
There is no need for a compat version.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Sat, 16 Sep 2006 00:29:37 +0000 (01:29 +0100)]
[MIPS] Make PROT_WRITE imply PROT_READ.
Maciej W. Rozycki [Tue, 12 Sep 2006 18:12:18 +0000 (19:12 +0100)]
[MIPS] Atlas: update interrupt handling
The following change updates the Atlas interrupt handling to match that
of Malta. Tested with a 5Kc and a 34Kf successfully.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Maciej W. Rozycki [Tue, 12 Sep 2006 18:02:44 +0000 (19:02 +0100)]
[MIPS] Atlas: Fix building the RTC driver
Atlas maps its RTC chip in the host mmio space rather than using the
"traditional" location in the PCI/ISA port space. A change that has
happened to the generic RTC header requires to define ARCH_RTC_LOCATION
now.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Kevin D. Kissell [Tue, 12 Sep 2006 10:08:08 +0000 (12:08 +0200)]
[MIPS] Patch to arch/mips/mips-boards/generic/time.c
In hooking up the perf counter overflow interrupt to the experimental
deprecated-real-soon-now /proc/perf interface last night, I had to
revisit arch/mips/mips-boards/generic/time.c, and discovered that
when the 2.6.9-based SMTC prototype was merged with the more
recent tree, it was missed that arch/mips/kernel/time.c had changed
so that even in SMP kernels, timer_interrupt() calls
local_timer_interrupt(), so there is no longer a need to invoke it
directly from mips_timer_interrupt() in those cases where
timer_interrupt() has been called. So I got rid of that, and added the
invocation of perf_irq() if Cause.PCI is set, more-or-less following the
same logic as in the non-SMTC case, with the modifications that (a) a
runtime check for Release 2 isn't done, because it's redundant in SMTC),
and (b) we check for a clock interrupt regardless of the value returned
by the perf counter service - I don't understand why we'd want to control
that with perf_irq(), but maybe one of you knows the story. I also got
rid of the stupid warning about the unused variable when compiled for
SMTC (another artifact of the merge). The result hasn't been beaten to
death, but boots, seems stable, and supports extended precision event
counting.
Signed-off-by: Kevin D. Kissell <kevink@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Wed, 7 Jun 2006 16:09:01 +0000 (01:09 +0900)]
[MIPS] Reduce race between cpu_wait() and need_resched() checking
If a thread became runnable between need_resched() and the WAIT
instruction, switching to the thread will delay until a next interrupt.
Some CPUs can execute the WAIT instruction with interrupt disabled, so
we can get rid of this race on them (at least UP case).
Original Patch by Atsushi with fixing up for MIPS Technology's cores by
Ralf based on feedback from the RTL designers.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Wed, 6 Sep 2006 13:42:02 +0000 (22:42 +0900)]
[MIPS] Wire up set_robust_list(2) and get_robust_list(2)
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Wed, 6 Sep 2006 16:00:22 +0000 (01:00 +0900)]
[MIPS] Fix errors detected by "make headers_check"
* export asm/sgidefs.h
* include asm/isadep.h only if in kernel
* do not export contents of asm/timex.h and asm/user.h
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Thu, 31 Aug 2006 18:39:09 +0000 (19:39 +0100)]
[MIPS] Do not lose upper 32-bit on MIPS32 with 64-bit addresses in __pte().
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Thu, 31 Aug 2006 13:16:06 +0000 (14:16 +0100)]
[MIPS] Replace generic__raw_read_trylock usage
generic__raw_read_trylock() is a defect generic function actually doing
a __raw_read_lock ...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Maciej W. Rozycki [Wed, 30 Aug 2006 13:29:57 +0000 (14:29 +0100)]
[MIPS] SEAD defconfig build fix
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Alexander Bigga [Tue, 29 Aug 2006 14:48:34 +0000 (16:48 +0200)]
[MIPS] Fix for pci config_access on alchemy au1x000
I've encountered a serious problem with PCI config space access on Au1x000
platforms with recent 2.6.x-kernel. With 2.4.31 the same hardware works fine.
So I was looking for the differences:
Symptoms:
- no PCI-device is seen on bootup though two or three cards are present
- lspci output is empty
- OR: lspci shows 20 times the same device
(- OR: in some slot-configurations it worked anyhow)
System(s):
1. platform with Au1500 and three PCI-devices (actually a mycable XXS1500
with backplane for three PCI-devices)
2. platform with Au1550 and two PCI-devices (custom board)
Debugging:
I digged down to the config_access() of the au1xxx-processors in
arch/mips/pci/ops-au1000.c and switched on DEBUG.
The code of config_access() seems to be almost the same as of the
2.4.x-kernel. But the "pci_cfg_vm->addr" returned by get_vm_area(0x2000, 0)
once on booting is different. That's of course not forbidden. But the
alignment seems to be wrong. In my case, I received:
2.4.31: pci_cfg_vm->addr =
c0000000
2.6.18-rc5: pci_cfg_vm->addr =
c0101000
To make it short: With 2.6.x it fails on the first config-access with:
"PCI ERR detected: status
83a00356".
Fixup:
My fix is now, to use the VM_IOREMAP-flag in the get_vm_area call. This flag
seems to be introduced in mm/vmalloc.c a long time ago (in 2.6.7-bk13, I
found in gitweb).
Now, the returned address is pci_cfg_vm->addr =
c0104000 and everything works
fine.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Tue, 29 Aug 2006 03:10:22 +0000 (12:10 +0900)]
[MIPS] Make prepare_frametrace() not clobber v0
Since lmo commit
323a380bf9e1a1679a774a2b053e3c1f2aa3f179 ("Simplify
dump_stack()") made prepare_frametrace() always inlined, using $2 (v0)
in __asm__ is not safe anymore. We can use $1 (at) instead. Also we
should use "dla" instead of "la" for 64-bit kernel.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Fri, 25 Aug 2006 08:55:31 +0000 (17:55 +0900)]
[MIPS] Do not use drop_mmu_context to flusing other task's VIPT I-cache.
c-r4k.c and c-sb1.c use drop_mmu_context() to flush virtually tagged
I-caches, but this does not work for flushing other task's icache. This
is for example triggered by copy_to_user_page() called from ptrace(2).
Use indexed flush for such cases.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Elizabeth Oldham [Thu, 17 Aug 2006 11:39:21 +0000 (12:39 +0100)]
[MIPS] MT: Fix setting of XTC.
XTC can only be set if VPA is clear, which it may not be. There is
also the possibility of a back to back c0 register access hazard to
take care of.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Wed, 16 Aug 2006 13:05:11 +0000 (14:05 +0100)]
[MIPS] SMTC Build fix.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Tue, 15 Aug 2006 23:59:40 +0000 (00:59 +0100)]
[MIPS] Fix 32-bit kernel by replacing 64-bit-only code.
dclz() expects its 64-bit argument being passed as a single register
but on 32-bit kernels it'll actually be in a register pair.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Tue, 15 Aug 2006 18:36:40 +0000 (19:36 +0100)]
[MIPS] MT: When doing "select SMP" also select SMP's prerequesites or ...
... kconfig will do weird stuff.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Sat, 12 Aug 2006 21:56:03 +0000 (22:56 +0100)]
[MIPS] eXcite: Don't set SERIAL_RM9000.
The driver has not been merged yet so selecting it results in a warning
message.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>