OSDN Git Service
Anthony Liguori [Fri, 23 Dec 2011 14:16:58 +0000 (08:16 -0600)]
info qdm: do not require a parent_bus to be set
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 23 Dec 2011 14:38:56 +0000 (08:38 -0600)]
qdev: implement cleanup logic in finalize
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 23 Dec 2011 14:35:43 +0000 (08:35 -0600)]
qom: accept any compatible type when setting a link property
Links had limited utility before as they only allowed a concrete type to be
specified. Now we can support abstract types and interfaces which means it's
now possible to have a link<PCIDevice>.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Mon, 30 Jan 2012 14:55:55 +0000 (08:55 -0600)]
qom: move properties from qdev to object
This is mostly code movement although not entirely. This makes properties part
of the Object base class which means that we can now start using Object in a
meaningful way outside of qdev.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 22 Dec 2011 21:29:25 +0000 (15:29 -0600)]
qdev: nuke qdev_init_chardev()
I'm sure the intentions were good here, but there's no reason this should be in
qdev. Move it to qemu-char where it belongs.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 22 Dec 2011 21:24:20 +0000 (15:24 -0600)]
qdev: split out UI portions into a new function
qdev-monitor.c deals with the -device, device_add, and info qdm/qtree
interfaces.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 22 Dec 2011 21:14:27 +0000 (15:14 -0600)]
qdev: refactor away qdev_create_from_info
Note that the FIXME gets fixed in series 4/4. We need to convert BusState to
QOM before we can make parent_bus a link.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 22 Dec 2011 21:06:37 +0000 (15:06 -0600)]
qdev: split out common init to instance_init
This gets us closer to being able to object_new() a qdev type and have a
functioning object verses having to call qdev_create().
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 22 Dec 2011 20:40:54 +0000 (14:40 -0600)]
qom: add new command to search for types
This adds a command that allows searching for types that implement a property.
This allows you to do things like search for all available PCIDevices. In the
future, we'll also have a standard interface for things with a BlockDriverState
property that a PCIDevice could implement.
This will enable search queries like, "any type that implements the BlockDevice
interface" which would allow management tools to present available block devices
without having to hard code device names. Since an object can implement
multiple interfaces, one device could act both as a BlockDevice and a
NetworkDevice.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 22 Dec 2011 17:05:00 +0000 (11:05 -0600)]
qdev: remove baked in notion of aliases (v2)
Limit them to the device_add functionality. Device aliases were a hack based
on the fact that virtio was modeled the wrong way. The mechanism for aliasing
is very limited in that only one alias can exist for any device.
We have to support it for the purposes of compatibility but we only need to
support it in device_add so restrict it to that piece of code.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- Use a table for aliases (Paolo)
Anthony Liguori [Fri, 9 Dec 2011 21:02:56 +0000 (15:02 -0600)]
qdev: kill off DeviceInfo
It is no longer used in the tree since everything is done natively through
QEMU Object Model.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 8 Dec 2011 03:34:16 +0000 (21:34 -0600)]
qdev: register all types natively through QEMU Object Model
This was done in a mostly automated fashion. I did it in three steps and then
rebased it into a single step which avoids repeatedly touching every file in
the tree.
The first step was a sed-based addition of the parent type to the subclass
registration functions.
The second step was another sed-based removal of subclass registration functions
while also adding virtual functions from the base class into a class_init
function as appropriate.
Finally, a python script was used to convert the DeviceInfo structures and
qdev_register_subclass functions to TypeInfo structures, class_init functions,
and type_register_static calls.
We are almost fully converted to QOM after this commit.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Wed, 1 Feb 2012 15:34:28 +0000 (09:34 -0600)]
qdev: kill off DeviceInfo list
Teach the various bits of code that need to walk through available devices to
do so via QOM.
Signed-off-by: Anthony Liguori
Anthony Liguori [Thu, 22 Dec 2011 20:11:53 +0000 (14:11 -0600)]
qom: allow object_class_foreach to take additional parameters to refine search
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 9 Dec 2011 18:08:01 +0000 (12:08 -0600)]
qdev: refactor device creation to allow bus_info to be set only in class
As we use class_init to set class members, DeviceInfo no longer holds this
information.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 9 Dec 2011 17:22:58 +0000 (11:22 -0600)]
qdev: allow classes to overload qdev functions
This allows us to drop per-Device registration functions by allowing the
class_init functions to overload qdev methods.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 9 Dec 2011 17:06:57 +0000 (11:06 -0600)]
qdev: remove info from class
Now DeviceInfo is no longer used after object construction. All of the
relevant members have been moved to DeviceClass.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 9 Dec 2011 16:51:49 +0000 (10:51 -0600)]
qdev: make DeviceInfo private
Introduce accessors and remove any code that directly accesses DeviceInfo
members.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 8 Dec 2011 20:56:53 +0000 (14:56 -0600)]
usb: separate out legacy usb registration from type registration
Type registeration is going to get turned into a QOM call so decouple the
legacy support.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Sun, 4 Dec 2011 22:13:14 +0000 (16:13 -0600)]
usb-hid: simplify class initialization a bit
We can probably model USBHidDevice as a base class to get even better code
sharing but for now, just use a common function to initialize the common class
members.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Weil [Fri, 27 Jan 2012 16:40:43 +0000 (17:40 +0100)]
Change license from GPLv2 to GPLv2+
This file only contains code from Red Hat, so it can use GPLv2+.
Tested with `git blame -M -C net/checksum.c`.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Corey Bryant [Thu, 26 Jan 2012 14:42:27 +0000 (09:42 -0500)]
Add support for net bridge
The most common use of -net tap is to connect a tap device to a bridge. This
requires the use of a script and running qemu as root in order to allocate a
tap device to pass to the script.
This model is great for portability and flexibility but it's incredibly
difficult to eliminate the need to run qemu as root. The only really viable
mechanism is to use tunctl to create a tap device, attach it to a bridge as
root, and then hand that tap device to qemu. The problem with this mechanism
is that it requires administrator intervention whenever a user wants to create
a guest.
By essentially writing a helper that implements the most common qemu-ifup
script that can be safely given cap_net_admin, we can dramatically simplify
things for non-privileged users. We still support existing -net tap options
as a mechanism for advanced users and backwards compatibility.
Currently, this is very Linux centric but there's really no reason why it
couldn't be extended for other Unixes.
A typical invocation would be similar to one of the following:
qemu linux.img -net bridge -net nic,model=virtio
qemu linux.img -net tap,helper="/usr/local/libexec/qemu-bridge-helper"
-net nic,model=virtio
qemu linux.img -netdev bridge,id=hn0
-device virtio-net-pci,netdev=hn0,id=nic1
qemu linux.img -netdev tap,helper="/usr/local/libexec/qemu-bridge-helper",id=hn0
-device virtio-net-pci,netdev=hn0,id=nic1
The default bridge that we attach to is br0. The thinking is that a distro
could preconfigure such an interface to allow out-of-the-box bridged networking.
Alternatively, if a user wants to use a different bridge, a typical invocation
would be simliar to one of the following:
qemu linux.img -net bridge,br=qemubr0 -net nic,model=virtio
qemu linux.img -net tap,helper="/usr/local/libexec/qemu-bridge-helper --br=qemubr0"
-net nic,model=virtio
qemu linux.img -netdev bridge,br=qemubr0,id=hn0
-device virtio-net-pci,netdev=hn0,id=nic1
qemu linux.img -netdev tap,helper="/usr/local/libexec/qemu-bridge-helper --br=qemubr0",id=hn0
-device virtio-net-pci,netdev=hn0,id=nic1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Corey Bryant [Thu, 26 Jan 2012 14:42:26 +0000 (09:42 -0500)]
Add cap reduction support to enable use as SUID
The ideal way to use qemu-bridge-helper is to give it an fscap of using:
setcap cap_net_admin=ep qemu-bridge-helper
Unfortunately, most distros still do not have a mechanism to package files
with fscaps applied. This means they'll have to SUID the qemu-bridge-helper
binary.
To improve security, use libcap to reduce our capability set to just
cap_net_admin, then reduce privileges down to the calling user. This is
hopefully close to equivalent to fscap support from a security perspective.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Corey Bryant [Thu, 26 Jan 2012 14:42:25 +0000 (09:42 -0500)]
Add access control support to qemu bridge helper
We go to great lengths to restrict ourselves to just cap_net_admin as an OS
enforced security mechanism. However, we further restrict what we allow users
to do to simply adding a tap device to a bridge interface by virtue of the fact
that this is the only functionality we expose.
This is not good enough though. An administrator is likely to want to restrict
the bridges that an unprivileged user can access, in particular, to restrict
an unprivileged user from putting a guest on what should be isolated networks.
This patch implements an ACL mechanism that is enforced by qemu-bridge-helper.
The ACLs are fairly simple whitelist/blacklist mechanisms with a wildcard of
'all'. All users are blacklisted by default, and deny takes precedence over
allow.
An interesting feature of this ACL mechanism is that you can include external
ACL files. The main reason to support this is so that you can set different
file system permissions on those external ACL files. This allows an
administrator to implement rather sophisticated ACL policies based on
user/group policies via the file system.
As an example:
/etc/qemu/bridge.conf root:qemu 0640
allow br0
include /etc/qemu/alice.conf
include /etc/qemu/bob.conf
include /etc/qemu/charlie.conf
/etc/qemu/alice.conf root:alice 0640
allow br1
/etc/qemu/bob.conf root:bob 0640
allow br2
/etc/qemu/charlie.conf root:charlie 0640
deny all
This ACL pattern allows any user in the qemu group to get a tap device
connected to br0 (which is bridged to the physical network).
Users in the alice group can additionally get a tap device connected to br1.
This allows br1 to act as a private bridge for the alice group.
Users in the bob group can additionally get a tap device connected to br2.
This allows br2 to act as a private bridge for the bob group.
Users in the charlie group cannot get a tap device connected to any bridge.
Under no circumstance can the bob group get access to br1 or can the alice
group get access to br2. And under no cicumstance can the charlie group
get access to any bridge.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Corey Bryant [Thu, 26 Jan 2012 14:42:24 +0000 (09:42 -0500)]
Add basic version of bridge helper
This patch adds a helper that can be used to create a tap device attached to
a bridge device. Since this helper is minimal in what it does, it can be
given CAP_NET_ADMIN which allows qemu to avoid running as root while still
satisfying the majority of what users tend to want to do with tap devices.
The way this all works is that qemu launches this helper passing a bridge
name and the name of an inherited file descriptor. The descriptor is one
end of a socketpair() of domain sockets. This domain socket is used to
transmit a file descriptor of the opened tap device from the helper to qemu.
The helper can then exit and let qemu use the tap device.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerhard Wiesinger [Wed, 25 Jan 2012 20:04:14 +0000 (21:04 +0100)]
hw/vmmouse.c: Disable vmmouse after reboot
Bugfix after reboot when vmmouse was enabled and another OS which uses e.g. PS/2
mouse.
Details:
When a guest activated the vmmouse followed by a reboot the vmmouse was still
enabled and the PS/2 mouse was therefore unsusable. When another guest is then
booted without vmmouse support (e.g. PS/2 mouse) the mouse is not working.
Reason is that VMMouse has priority and disables all other mouse entities
and therefore must be disabled on reset.
Testscenario:
1.) Boot e.g. OS with VMMouse support (e.g. Windows with VMMouse tools)
2.) reboot
3.) Boot e.g. OS without VMMouse support (e.g. DOS) => PS/2 mouse doesn't work
any more. Fixes that issue.
Testscenario 2 by Jan Kiszka <jan.kiszka@siemens.com>:
Confirm that this patch fixes a real issue. Setup: qemu.git,
opensuse 11.4 guest, SDL graphic, system_reset while guest is using the
vmmouse. Without the patch, the vmmouse become unusable after the
reboot. Also, the mouse stays in absolute mode even before X starts again.
Fixed by:
Disabling the vmmouse in its reset handler.
Tested-by: Andreas F=E4rber <afaerber@suse.de>
Signed-off-by: Gerhard Wiesinger <lists@wiesinger.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Laszlo Ersek [Fri, 27 Jan 2012 13:34:05 +0000 (14:34 +0100)]
keep the PID file locked for the lifetime of the process
The lockf() call in qemu_create_pidfile() aims at ensuring mutual
exclusion. We shouldn't close the pidfile on success (as introduced by
commit
1bbd1592), because that drops the lock as well [1]:
"File locks shall be released on first close by the locking process
of any file descriptor for the file."
Coverity may complain again about the leaked file descriptor; let's
worry about that later.
v1->v2:
- add reference to
1bbd1592
- explain the intentional fd leak in the source
[1] http://pubs.opengroup.org/onlinepubs/
9699919799/functions/lockf.html
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Michael Roth [Sat, 21 Jan 2012 17:13:53 +0000 (11:13 -0600)]
main-loop: For tools, initialize timers as part of qemu_init_main_loop()
In some cases initializing the alarm timers can lead to non-negligable
overhead from programs that link against qemu-tool.o. At least,
setting a max-resolution WinMM alarm timer via mm_start_timer() (the
current default for Windows) can increase the "tick rate" on Windows
OSs and affect frequency scaling, and in the case of tools that run
in guest OSs such has qemu-ga, the impact can be fairly dramatic
(+20%/20% user/sys time on a core 2 processor was observed from an idle
Windows XP guest).
This patch doesn't address the issue directly (not sure what a good
solution would be for Windows, or what other situations it might be
noticeable), but it at least limits the scope of the issue to programs
that "opt-in" to using the main-loop.c functions by only enabling alarm
timers when qemu_init_main_loop() is called, which is already required
to make use of those facilities, so existing users shouldn't be
affected.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Michael Roth [Sat, 21 Jan 2012 01:08:27 +0000 (19:08 -0600)]
main-loop: Fix SetEvent() on uninitialized handle on win32
The __attribute__((constructor)) init_main_loop() automatically get
called if qemu-tool.o is linked in. On win32, this leads to
a qemu_notify_event() call which attempts to SetEvent() on a HANDLE that
won't be initialized until qemu_init_main_loop() is manually called,
breaking qemu-tools.o programs on Windows at runtime.
This patch checks for an initialized event handle before attempting to
set it, which is analoguous to how we deal with an unitialized
io_thread_fd in the posix implementation.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Mon, 30 Jan 2012 10:27:33 +0000 (11:27 +0100)]
optionroms: Silence intermediate file removal
The build process of optionroms spits out an "rm ..." line. Moreover, it
removes all .o files that can be handy for debugging purposes. So
disable automatic intermediate removal.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Tue, 31 Jan 2012 12:45:31 +0000 (13:45 +0100)]
sdl: Limit sdl_grab_end in handle_activation to Windows hosts
There are scenarios on Linux with some SDL versions where
handle_activation is continuous invoked with state = SDL_APPINPUTFOCUS
and gain = 0 while we grabbed the input. This causes a ping-pong when we
grab the input after an absolute mouse entered the window.
As this sdl_grab_end was once introduced to work around a Windows-only
issue (
0294ffb9c8), limit it to that platform.
CC: Erik Rull <erik.rull@rdsoftware.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Tue, 31 Jan 2012 12:45:30 +0000 (13:45 +0100)]
sdl: Grab input on end of non-absolute mouse click
By grabbing the input already on button down, we leave the button in
that state for the host GUI. Thus it takes another click after releasing
the input again to synchronize the mouse button state.
Avoid this by grabbing on button up.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Tue, 31 Jan 2012 12:45:29 +0000 (13:45 +0100)]
Revert "Handle SDL grabs failing (Mark McLoughlin)"
This reverts commit
6bb816031f8bc0aafc3476e6dfa4293ee3a5f106.
SDL_WM_GrabInput does not reliably bail out if grabbing is impossible.
So if we get here, we already lost and will block. But this can no
longer happen due to the check in sdl_grab_start. So this patch became
obsolete.
Conflicts:
sdl.c
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Tue, 31 Jan 2012 12:45:28 +0000 (13:45 +0100)]
sdl: Fix block prevention of SDL_WM_GrabInput
Consistently check for SDL_APPINPUTFOCUS before trying to grab the input
focus. Just checking for SDL_APPACTIVE doesn't work. Moving the check to
sdl_grab_start allows for some consolidation.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Tue, 31 Jan 2012 12:45:27 +0000 (13:45 +0100)]
sdl: Do not grab mouse on mode switch while in background
When the mouse mode changes to absolute while the SDL windows is not in
focus, refrain from grabbing the input. It would steal from some other
window.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Fri, 27 Jan 2012 18:55:43 +0000 (19:55 +0100)]
Improve default machine options usability
So far we overwrite the machine options completely with defaults if no
accel=value is provided. More user friendly is to fill in only
unspecified options. The new qemu_opts_set_defaults enables this.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Mon, 23 Jan 2012 19:15:12 +0000 (20:15 +0100)]
mc146818rtc: Use lost_tick_policy property
Allow to configure the MC146818 RTC via the new lost tick policy
property and replace rtc_td_hack with this mechanism.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Fri, 27 Jan 2012 18:54:54 +0000 (19:54 +0100)]
qemu-option: Introduce default mechanism
This adds qemu_opts_set_defaults, an interface provide default values
for a QemuOpts set. Default options are parsed from a string and then
prepended to the list of existing options, or they serve as the sole
QemuOpts set.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Mon, 23 Jan 2012 19:15:11 +0000 (20:15 +0100)]
qdev: Introduce lost tick policy property
Potentially tick-generating timer devices will gain a common property:
lock_tick_policy. It allows to encode 4 different ways how to deal with
tick events the guest did not process in time:
discard - ignore lost ticks (e.g. if the guest compensates for them
already)
delay - replay all lost ticks in a row once the guest accepts them
again
merge - if multiple ticks are lost, all of them are merged into one
which is replayed once the guest accepts it again
slew - lost ticks are gradually replayed at a higher frequency than
the original tick
Not all timer device will need to support all modes. However, all need
to accept the configuration via this common property.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Wed, 1 Feb 2012 18:50:42 +0000 (18:50 +0000)]
Makefile: Remove linux-headers/asm symlink on distclean
configure creates a linux-headers/asm symlink. Remove this when
doing a distclean.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Tue, 17 Jan 2012 13:23:13 +0000 (13:23 +0000)]
exec.c: Clarify comment about tlb_flush() flush_global parameter
Clarify the comment about tlb_flush()'s flush_global parameter,
so it is clearer what it does and why it is OK that the implementation
currently ignores it.
Reviewed-by: Andreas F=C3=A4rber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Aneesh Kumar K.V [Thu, 19 Jan 2012 17:27:11 +0000 (22:57 +0530)]
hw/9pfs: Update MAINTAINERS file
Acked-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Weil [Fri, 27 Jan 2012 17:53:49 +0000 (18:53 +0100)]
MAINTAINERS: Add a section for the host OS and a W32 maintainer
Up to now, there was no special section for the different
host operating systems used with QEMU.
scripts/get_maintainer.pl did not show a maintainer for
OS specific files and patches.
Therefore I added three hosts systems:
* POSIX for the majority of host systems which are supported.
This includes BSD and Linux host systems.
* LINUX is a special case of POSIX needed for some Linux specific
files and directories.
* W32, W64 for a well known family of closed source operating systems.
I also added myself as a maintainer for W32, W64.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Sergei Trofimovich [Tue, 31 Jan 2012 19:03:58 +0000 (22:03 +0300)]
./configure: add link check for nss-smartcard
Current './configure --static && make' fails for me:
LINK qemu-nbd
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lssl3
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lsmime3
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lnssutil3
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lnss3
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lplds4
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lplc4
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lnspr4
My system does not provide static libraries for nss, so
fix autoconfiguration by link checking.
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
CC: qemu-trivial <qemu-trivial@nongnu.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Sergei Trofimovich [Tue, 31 Jan 2012 19:03:45 +0000 (22:03 +0300)]
./configure: request pkg-config to provide private libs when static linking
Added wrapper around pkg-config to allow:
- safe options injection via ${QEMU_PKG_CONFIG_FLAGS}
- spaces in path to pkg-config
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Fri, 20 Jan 2012 12:05:00 +0000 (13:05 +0100)]
m48t59: use rtc_clock for alarm timer
This lets the RTC get adjustments from the host NTP client.
The watchdog still uses the vm_clock. The previous behavior is
available with "-rtc clock=vm".
Cc: Andreas Färber <afaerber@suse.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fabien Chouteau [Thu, 26 Jan 2012 17:03:15 +0000 (18:03 +0100)]
GRLIB UART: Add RX channel
This patch implements the RX channel of GRLIB UART with a FIFO to
improve data rate.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Avi Kivity [Sun, 29 Jan 2012 14:47:47 +0000 (16:47 +0200)]
Fix off-by-one in dirty bitmap functions
Reported-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 28 Jan 2012 13:11:20 +0000 (13:11 +0000)]
Merge branch 'target-arm.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm
* 'target-arm.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
Add Cortex-A15 CPU definition
Add dummy implementation of generic timer cp15 registers
arm: store the config_base_register during cpu_reset
target-arm/helper.c: Don't assume softfloat int32 is 32 bits only
target-arm: Fix implementation of TLB invalidate operations
Andreas Färber [Fri, 27 Jan 2012 19:08:52 +0000 (20:08 +0100)]
unin_pci: Fix typos in device names
Commit
999e12bbe85c5dcf49bef13bce4f97399c7105f4 (sysbus: apic: ioapic:
convert to QEMU Object Model) introduced two typos, one of which broke
the mac99 machine.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Wed, 25 Jan 2012 19:37:36 +0000 (13:37 -0600)]
qdev: change ambiguous qdev names
Reported-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 22 Dec 2011 02:57:49 +0000 (20:57 -0600)]
virtio-s390: convert to QEMU Object Model
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Tue, 24 Jan 2012 19:12:29 +0000 (13:12 -0600)]
sysbus: apic: ioapic: convert to QEMU Object Model
This converts three devices because apic and ioapic are subclasses of sysbus.
Converting subclasses independently of their base class is prohibitively hard.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Sun, 4 Dec 2011 18:22:06 +0000 (12:22 -0600)]
pci: convert to QEMU Object Model
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Andreas Färber [Thu, 19 Jan 2012 07:40:18 +0000 (07:40 +0000)]
unin_pci: Drop unused reset handler
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Andreas Färber [Thu, 19 Jan 2012 07:40:17 +0000 (07:40 +0000)]
unin_pci: Drop duplicate busdev
PCIHostState already has a busdev.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Andreas Färber [Thu, 19 Jan 2012 07:40:16 +0000 (07:40 +0000)]
unin_pci: Clean up qdev names
Add -pcihost to SysBus devices to resolve name conflicts,
and clarify PCI vs. Internal PCI.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Anthony Liguori [Sun, 4 Dec 2011 18:38:12 +0000 (12:38 -0600)]
virtio-serial: convert to QEMU Object Model
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 15 Dec 2011 22:31:06 +0000 (16:31 -0600)]
spapr: convert to QEMU Object Model (v2)
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- use QOM to check for the default console
Anthony Liguori [Thu, 15 Dec 2011 20:50:08 +0000 (14:50 -0600)]
scsi: convert to QEMU Object Model
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 16 Dec 2011 19:41:12 +0000 (13:41 -0600)]
ide: convert to QEMU Object Model
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 16 Dec 2011 19:39:51 +0000 (13:39 -0600)]
hda-codec: convert to QEMU Object Model
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Mon, 5 Dec 2011 02:39:20 +0000 (20:39 -0600)]
i2c: smbus: convert to QEMU Object Model
This converts two types because smbus is implemented as a subclass of i2c. It's
extremely difficult to convert these two independently.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Mon, 5 Dec 2011 02:28:27 +0000 (20:28 -0600)]
i2c: rename i2c_slave -> I2CSlave
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 16 Dec 2011 19:36:39 +0000 (13:36 -0600)]
ssi: convert to QEMU Object Model
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Sun, 4 Dec 2011 18:34:10 +0000 (12:34 -0600)]
ccid: convert to QEMU Object Model
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 15 Dec 2011 20:53:10 +0000 (14:53 -0600)]
usb: convert to QEMU Object Model
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Sun, 4 Dec 2011 17:52:49 +0000 (11:52 -0600)]
isa: pic: convert to QEMU Object Model
This converts two devices at once because PIC subclasses ISA and converting
subclasses independently is extremely hard.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Wed, 7 Dec 2011 01:32:44 +0000 (19:32 -0600)]
qdev: prepare source tree for code conversion
These are various small stylistic changes which help make things more
consistent such that the automated conversion script can be simpler.
It's not necessary to agree or disagree with these style changes because all
of this code is going to be rewritten by the patch monkey script anyway.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Sun, 4 Dec 2011 20:37:06 +0000 (14:37 -0600)]
qdev: add class_init to DeviceInfo
Since we are still dynamically creating TypeInfo, we need to chain the
class_init function in order to be able to make use of it within subclasses of
TYPE_DEVICE.
This will disappear once we register TypeInfos directly.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 15 Dec 2011 20:40:29 +0000 (14:40 -0600)]
qdev: add a interface to register subclasses
In order to introduce inheritance while still using the qdev registration
interfaces, we need to be able to use a parent other than TYPE_DEVICE. Add a
new interface that allows this.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Sun, 4 Dec 2011 17:36:01 +0000 (11:36 -0600)]
qdev: use a wrapper to access reset and promote reset to a class method
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Sun, 4 Dec 2011 17:17:51 +0000 (11:17 -0600)]
qdev: don't access name through info
We already have a QOM interface for this so let's use it.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Sun, 4 Dec 2011 17:08:36 +0000 (11:08 -0600)]
qdev: move qdev->info to class
Right now, DeviceInfo acts as the class for qdev. In order to switch to a
proper ObjectClass derivative, we need to ween all of the callers off of
interacting directly with the info pointer.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 16 Dec 2011 20:34:46 +0000 (14:34 -0600)]
qdev: integrate with QEMU Object Model (v2)
This is a very shallow integration. We register a TYPE_DEVICE but only use
QOM as basically a memory allocator. This will make all devices show up as
QOM objects but they will all carry the TYPE_DEVICE.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- update for new location of object.h
Anthony Liguori [Sat, 3 Dec 2011 23:10:08 +0000 (17:10 -0600)]
qom: add the base Object class (v2)
This class provides the main building block for QEMU Object Model and is
extensively documented in the header file. It is largely inspired by GObject.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- remove printf() in type registration
- fix typo in comment (Paolo)
- make Interface private
- move object into a new directory and move header into include/qemu/
- don't make object.h depend on qemu-common.h
- remove Type and replace it with TypeImpl * (Paolo)
- use hash table to store types (Paolo)
- aggressively cache parent type (Paolo)
- make a type_register and use it with interfaces (Paolo)
- fix interface cast comment (Paolo)
- add a few more functions required in later series
Anthony Liguori [Sun, 4 Dec 2011 17:40:58 +0000 (11:40 -0600)]
pci: call reset unconditionally
Because now all PCI devices are converted to qdev.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Wed, 21 Dec 2011 22:18:02 +0000 (16:18 -0600)]
openpic: remove dead code to make a PCI device version
bus is always NULL so the code in this if clause is dead (and therefore
untested).
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Wed, 21 Dec 2011 22:14:09 +0000 (16:14 -0600)]
macio: convert to qdev
This is a "shallow", half hearted, and untested conversion.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 27 Jan 2012 15:00:03 +0000 (09:00 -0600)]
Merge remote-tracking branch 'pmaydell/arm-devs.for-upstream' into staging
* pmaydell/arm-devs.for-upstream:
arm: SoC model for Calxeda Highbank
arm_boot: support board IDs more than 16 bits wide
arm: add secondary cpu boot callbacks to arm_boot.c
ahci: add support for non-PCI based controllers
Add xgmac ethernet model
Anthony Liguori [Fri, 27 Jan 2012 14:58:52 +0000 (08:58 -0600)]
Merge remote-tracking branch 'kwolf/for-anthony' into staging
* kwolf/for-anthony: (22 commits)
scsi: Guard against buflen exceeding req->cmd.xfer in scsi_disk_emulate_command
qcow: Use bdrv functions to replace file operation
qcow: Return real error code in qcow_open
block/vdi: Zero unused parts when allocating a new block (fix #919242)
virtio-blk: add virtio_blk_handle_read trace event
docs: describe live block operations
block: add support for partial streaming
add QERR_BASE_NOT_FOUND
block: add bdrv_find_backing_image
blockdev: make image streaming safe across hotplug
qmp: add query-block-jobs
qmp: add block_job_cancel command
qmp: add block_job_set_speed command
qmp: add block_stream command
block: rate-limit streaming operations
block: add image streaming block job
block: add BlockJob interface for long-running operations
block: make copy-on-read a per-request flag
block: check bdrv_in_use() before blockdev operations
coroutine: add co_sleep_ns() coroutine sleep function
...
Laszlo Ersek [Tue, 24 Jan 2012 20:13:28 +0000 (21:13 +0100)]
qemu-io: end aio help text sentences with periods
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Sergei Trofimovich [Tue, 24 Jan 2012 17:42:40 +0000 (20:42 +0300)]
./configure: export xfs config via --{enable, disable}-xfsctl
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Jan Kiszka [Tue, 24 Jan 2012 12:47:56 +0000 (13:47 +0100)]
pcnet: Preserve link state across device reset
A device reset does not affect the link state, only set_link does.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Jan Kiszka [Tue, 24 Jan 2012 12:47:46 +0000 (13:47 +0100)]
e1000: Preserve link state across device reset
A device reset does not affect the link state, only set_link does.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Jan Kiszka [Sat, 21 Jan 2012 13:43:07 +0000 (14:43 +0100)]
qdev-property: Make bit property parsing stricter
By using strncasecmp, we allow for arbitrary characters after the
"on"/"off" string. Fix this by switching to strcasecmp.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Paolo Bonzini [Fri, 20 Jan 2012 11:05:22 +0000 (12:05 +0100)]
remove #if 0 code for timers
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Thomas Higdon [Tue, 24 Jan 2012 17:19:44 +0000 (12:19 -0500)]
scsi: Guard against buflen exceeding req->cmd.xfer in scsi_disk_emulate_command
Limit the return value (corresponding to the length of the buffer to be
DMAed back to the intiator) to the value in req->cmd.xfer, which is the
amount of data that the initiator expects. Eliminate now-duplicate code
that does this guarding in the functions for individual commands.
Without this, the SCRIPTS code in the emulated LSI device eventually
raises a DMA interrupt for a data overrun when an INQUIRY command whose
buflen exceeds req->cmd.xfer is processed. It's the responsibility of
the client to provide a request buffer and allocation length that are
large enough for the result of the command.
Signed-off-by: Thomas Higdon <thigdon@akamai.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Li Zhi Hui [Mon, 21 Nov 2011 07:40:39 +0000 (15:40 +0800)]
qcow: Use bdrv functions to replace file operation
Since common file operation functions lack of error detection and use
much more I/O syscalls, so change them to bdrv series functions and
reduce I/O request.
Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Li Zhi Hui [Thu, 15 Dec 2011 10:14:00 +0000 (18:14 +0800)]
qcow: Return real error code in qcow_open
Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Weil [Sat, 21 Jan 2012 12:54:24 +0000 (13:54 +0100)]
block/vdi: Zero unused parts when allocating a new block (fix #919242)
The new block was filled with zero when it was allocated by g_malloc0,
but when it was reused later and only partially used, data from the
previously allocated block were still present and written to the new
block.
This caused the problems reported by bug #919242
(https://bugs.launchpad.net/qemu/+bug/919242).
Now the unused parts of the new block which are before and after the data
are always filled with zero, so it is no longer necessary to zero the whole
block with g_malloc0.
I also updated the copyright comment.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Thu, 22 Dec 2011 13:17:02 +0000 (13:17 +0000)]
virtio-blk: add virtio_blk_handle_read trace event
There already exists a virtio_blk_handle_write trace event as well as
completion events. Add the virtio_blk_handle_read event so it's easy to
trace virtio-blk requests for both read and write operations.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Marcelo Tosatti [Wed, 18 Jan 2012 14:40:54 +0000 (14:40 +0000)]
docs: describe live block operations
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Marcelo Tosatti [Wed, 18 Jan 2012 14:40:53 +0000 (14:40 +0000)]
block: add support for partial streaming
Add support for streaming data from an intermediate section of the
image chain (see patch and documentation for details).
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Marcelo Tosatti [Wed, 18 Jan 2012 14:40:52 +0000 (14:40 +0000)]
add QERR_BASE_NOT_FOUND
This qerror will be raised when a given streaming base (backing file)
cannot be found.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Marcelo Tosatti [Wed, 18 Jan 2012 14:40:51 +0000 (14:40 +0000)]
block: add bdrv_find_backing_image
Add bdrv_find_backing_image: given a BlockDriverState pointer, and an id,
traverse the backing image chain to locate the id.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Wed, 18 Jan 2012 14:40:50 +0000 (14:40 +0000)]
blockdev: make image streaming safe across hotplug
Unplugging a storage interface like virtio-blk causes the host block
device to be deleted too. Long-running operations like block migration
must take a DriveInfo reference to prevent the BlockDriverState from
being freed. For image streaming we can do the same thing.
Note that it is not possible to acquire/release the drive reference in
block.c where the block job functions live because
drive_get_ref()/drive_put_ref() are blockdev.c functions. Calling them
from block.c would be a layering violation - tools like qemu-img don't
even link against blockdev.c.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Wed, 18 Jan 2012 14:40:49 +0000 (14:40 +0000)]
qmp: add query-block-jobs
Add query-block-jobs, which shows the progress of ongoing block device
operations.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Wed, 18 Jan 2012 14:40:48 +0000 (14:40 +0000)]
qmp: add block_job_cancel command
Add block_job_cancel, which stops an active block streaming operation.
When the operation has been cancelled the new BLOCK_JOB_CANCELLED event
is emitted.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Wed, 18 Jan 2012 14:40:47 +0000 (14:40 +0000)]
qmp: add block_job_set_speed command
Add block_job_set_speed, which sets the maximum speed for a background
block operation.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>