OSDN Git Service
Diego Biurrun [Tue, 31 Jul 2012 10:17:02 +0000 (12:17 +0200)]
x86: yadif: Mark mmxext optimizations as such
The yadif mmx optimizations contain the pmaxsw and pmaxub mmxext
instructions, causing sigills on CPUs that do not support mmxext.
Ronald S. Bultje [Sat, 28 Jul 2012 17:11:00 +0000 (10:11 -0700)]
h264: convert loop filter strength dsp function to yasm.
This completes the conversion of h264dsp to yasm; note that h264 also
uses some dsputil functions, most notably qpel. Performance-wise, the
yasm-version is ~10 cycles faster (182->172) on x86-64, and ~8 cycles
faster (201->193) on x86-32.
Diego Biurrun [Tue, 24 Jul 2012 01:23:48 +0000 (03:23 +0200)]
Improve descriptiveness of a number of codec and container long names
Diego Biurrun [Tue, 24 Jul 2012 21:51:41 +0000 (23:51 +0200)]
avformat: Drop pointless "format" from container long names
Ronald S. Bultje [Thu, 26 Jul 2012 02:27:03 +0000 (19:27 -0700)]
swscale: bury one more piece of inline asm under HAVE_INLINE_ASM.
Anton Khirnov [Sat, 28 Jul 2012 10:42:25 +0000 (12:42 +0200)]
wv: K&R formatting cosmetics
Diego Biurrun [Fri, 27 Jul 2012 11:01:04 +0000 (13:01 +0200)]
configure: Add missing descriptions to help output
Ronald S. Bultje [Sun, 29 Jul 2012 04:45:24 +0000 (21:45 -0700)]
h264_ps: declare array of colorspace strings on its own line.
Mans Rullgard [Sun, 29 Jul 2012 17:11:27 +0000 (18:11 +0100)]
fate: amix: specify f32 sample format for comparison
Signed-off-by: Mans Rullgard <mans@mansr.com>
Mans Rullgard [Sun, 29 Jul 2012 17:10:36 +0000 (18:10 +0100)]
tiny_psnr: support 32-bit float samples
Signed-off-by: Mans Rullgard <mans@mansr.com>
Mans Rullgard [Sun, 29 Jul 2012 12:09:10 +0000 (13:09 +0100)]
eamad/eatgq/eatqi: call special EA IDCT directly
These decoders use a special non-MPEG2 IDCT. Call it directly
instead of going through dsputil. There is never any reason
to use a regular IDCT with these decoders or to use the EA IDCT
with other codecs.
This also fixes the bizarre situation of eamad and eatqi decoding
incorrectly if eatgq is disabled.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Mans Rullgard [Fri, 27 Jul 2012 16:00:38 +0000 (17:00 +0100)]
eamad: remove use of MpegEncContext
There is no sense in pulling in this monster struct just for
a handful of fields. The code does not call any functions
expecting an MpegEncContext.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Mans Rullgard [Sun, 29 Jul 2012 12:20:54 +0000 (13:20 +0100)]
mpegvideo: remove unnecessary inclusions of faandct.h
Signed-off-by: Mans Rullgard <mans@mansr.com>
Justin Ruggles [Sat, 28 Jul 2012 17:12:38 +0000 (13:12 -0400)]
af_asyncts: avoid overflow in out_size with large delta values
Justin Ruggles [Sat, 28 Jul 2012 16:57:05 +0000 (12:57 -0400)]
af_asyncts: add first_pts option
This allows for padding/trimming at the start of stream. By default, no
assumption is made about the first frame's expected pts, so no padding or
trimming is done.
Luca Barbato [Thu, 26 Jul 2012 14:18:11 +0000 (16:18 +0200)]
flvdec: remove spurious use of stream id
We match streams by codec id now.
Anton Khirnov [Tue, 26 Jun 2012 11:10:01 +0000 (13:10 +0200)]
lavf: deprecate r_frame_rate.
According to its description, it is supposed to be the LCM of all the
frame durations. The usability of such a thing is vanishingly small,
especially since we cannot determine it with any amount of reliability.
Therefore get rid of it after the next bump.
Replace it with the average framerate where it makes sense.
FATE results for the wtv and xmv demux tests change. In the wtv case
this is caused by the file being corrupted (or possibly badly cut) and
containing invalid timestamps. This results in lavf estimating the
framerate wrong and making up wrong frame durations.
In the xmv case the file contains pts jumps, so again the estimated
framerate is far from anything sane and lavf again makes up different
frame durations.
In some other tests lavf starts making up frame durations from different
frame.
Anton Khirnov [Fri, 27 Jul 2012 12:04:07 +0000 (14:04 +0200)]
lavf: round estimated average fps to a "standard" fps.
Anton Khirnov [Thu, 28 Jun 2012 13:49:51 +0000 (15:49 +0200)]
lavf: use dts difference instead of AVPacket.duration in find_stream_info()
AVPacket.duration is mostly made up and thus completely useless, this is
especially true for video streams.
Therefore use dts difference for framerate estimation and
the max_analyze_duration check.
The asyncts test now needs -analyzeduration, because the default is 5
seconds and the audio stream in the sample appears at ~10 seconds.
Luca Barbato [Thu, 26 Jul 2012 23:35:12 +0000 (16:35 -0700)]
avf: introduce nobuffer option
Useful in cases where a significant analyzeduration is
still needed, while minimizing buffering before output.
An example is processing low-latency streams where all
media types won't necessarily come in if the
analyzeduration is small.
Additional changes by Josh Allmann <joshua.allmann@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Mans Rullgard [Sat, 28 Jul 2012 17:15:56 +0000 (18:15 +0100)]
fate: make yadif tests consistent across systems
MMX-enabled systems by default use some dsputil functions differing
from the C versions. Adding these flags ensures accurate ones are
used everywhere.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Loren Merritt [Fri, 27 Jul 2012 01:42:05 +0000 (01:42 +0000)]
vf_hqdn3d: support 9 and 10bit colordepth
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Loren Merritt [Thu, 26 Jul 2012 22:51:15 +0000 (22:51 +0000)]
vf_hqdn3d: reduce intermediate precision
11% faster on penryn, 7% on sandybridge, 5% on bulldozer
Negligible change to output.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Loren Merritt [Thu, 26 Jul 2012 22:51:14 +0000 (22:51 +0000)]
vf_hqdn3d: simplify and optimize
14% faster on penryn, 2% on sandybridge, 9% on bulldozer
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Loren Merritt [Thu, 26 Jul 2012 22:51:12 +0000 (22:51 +0000)]
factor identical ff_inplace_start_frame out of two filters
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Loren Merritt [Thu, 26 Jul 2012 22:51:13 +0000 (22:51 +0000)]
vf_hqdn3d: cosmetics
Change code style to match the rest of libav.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Ronald S. Bultje [Thu, 26 Jul 2012 04:23:23 +0000 (04:23 +0000)]
avprobe/avconv: fix tentative declaration compile errors on MSVS.
Ronald S. Bultje [Sat, 28 Jul 2012 15:01:12 +0000 (08:01 -0700)]
h264_idct_10bit: port x86 assembly to cpuflags.
Loren Merritt [Fri, 27 Jul 2012 16:33:41 +0000 (09:33 -0700)]
x86inc: clip num_args to 7 on x86-32.
This allows us to unconditionally set the cglobal num_args
parameter to a bigger value, thus making writing yasm code
even easier than before.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Ronald S. Bultje [Fri, 27 Jul 2012 03:26:17 +0000 (20:26 -0700)]
x86inc: sync to latest version from x264.
Ronald S. Bultje [Sat, 28 Jul 2012 15:20:19 +0000 (08:20 -0700)]
fft: rename "z" to "zc" to prevent name collision.
Without this, cglobal will expand "z" to "zh" to access the high byte
in a register's word, which causes a name collision with the ZH(x) macro
further up in this file.
Anton Khirnov [Sat, 28 Jul 2012 10:28:05 +0000 (12:28 +0200)]
wv: return meaningful error codes.
Anton Khirnov [Sat, 28 Jul 2012 10:23:04 +0000 (12:23 +0200)]
wv: return AVERROR_EOF on EOF, not EIO.
Anton Khirnov [Sat, 28 Jul 2012 10:21:21 +0000 (12:21 +0200)]
mp3dec: forward errors for av_get_packet().
Don't invent a bogus EIO error.
The code now doesn't check for ret == 0, but that check is redundant,
av_get_packet() never returns 0.
Anton Khirnov [Sat, 28 Jul 2012 10:20:08 +0000 (12:20 +0200)]
mp3dec: remove a pointless local variable.
Anton Khirnov [Sat, 28 Jul 2012 10:18:51 +0000 (12:18 +0200)]
mp3dec: remove commented out cruft.
Anton Khirnov [Wed, 25 Jul 2012 06:34:44 +0000 (08:34 +0200)]
lavfi: bump minor to mark stabilizing the ABI.
Anton Khirnov [Wed, 25 Jul 2012 06:25:38 +0000 (08:25 +0200)]
FATE: add tests for yadif.
Anton Khirnov [Mon, 9 Jul 2012 10:09:58 +0000 (12:09 +0200)]
FATE: add a test for delogo video filter.
Anton Khirnov [Tue, 29 May 2012 10:08:58 +0000 (12:08 +0200)]
FATE: add a test for amix audio filter.
Anton Khirnov [Wed, 4 Jul 2012 04:32:30 +0000 (06:32 +0200)]
audiogen: allow specifying random seed as a commandline parameter.
Michael Niedermayer [Sat, 28 Jul 2012 12:07:45 +0000 (18:07 +0600)]
vc1dec: Override invalid macroblock quantizer
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
Michael Niedermayer [Sat, 28 Jul 2012 10:27:55 +0000 (16:27 +0600)]
vc1: avoid reading beyond the last line in vc1_draw_sprites()
Fixes overread
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
Michael Niedermayer [Sat, 28 Jul 2012 11:14:50 +0000 (17:14 +0600)]
vc1dec: check that coded slice positions and interlacing match.
This fixes out of array writes
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
Michael Niedermayer [Sat, 28 Jul 2012 11:14:48 +0000 (17:14 +0600)]
vc1dec: Do not ignore ff_vc1_parse_frame_header_adv return value
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
Diego Biurrun [Fri, 27 Jul 2012 00:06:29 +0000 (02:06 +0200)]
configure: Move parts that should not be user-selectable to CONFIG_EXTRA
Anton Khirnov [Thu, 28 Jun 2012 11:33:12 +0000 (13:33 +0200)]
lavf: remove commented out cruft in avformat_find_stream_info()
Anton Khirnov [Fri, 27 Jul 2012 14:28:36 +0000 (16:28 +0200)]
Add missing libavutil/time.h includes.
Ronald S. Bultje [Fri, 27 Jul 2012 05:16:37 +0000 (22:16 -0700)]
vp3: don't compile mmx IDCT functions on x86-64.
64-bit CPUs always have SSE2, and a SSE2 version exists, thus the MMX
version will never be used.
Ronald S. Bultje [Sat, 28 Jul 2012 00:45:30 +0000 (17:45 -0700)]
h264_loopfilter: port x86 simd to cpuflags.
Mans Rullgard [Fri, 20 Jul 2012 22:43:27 +0000 (23:43 +0100)]
build: support non-standard replacements for -c flag
This allows non-standard replacements for the -c compiler flag.
Some compilers use other flags or no flag at all in place of
the usual one.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Mans Rullgard [Fri, 20 Jul 2012 21:22:41 +0000 (22:22 +0100)]
build: support non-standard replacements for -E flag
This allows using non-standard flags for running the C preprocessor.
The -o flag must be included in this setting due to strange syntax
required by some compilers.
Set the correct flags for tms470.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Ronald S. Bultje [Fri, 27 Jul 2012 03:43:50 +0000 (20:43 -0700)]
h264_chromamc_10bit: port x86 simd to cpuflags.
Ronald S. Bultje [Fri, 27 Jul 2012 22:17:27 +0000 (15:17 -0700)]
vp3: port x86 SIMD to cpuflags.
Diego Biurrun [Fri, 27 Jul 2012 10:06:01 +0000 (12:06 +0200)]
build: Use portable compiler flag constructs in header compilation rule
Diego Biurrun [Sat, 21 Jul 2012 19:28:54 +0000 (21:28 +0200)]
x11grab: cosmetics: consistent naming for x11grab-related things
Diego Biurrun [Wed, 25 Jul 2012 11:25:58 +0000 (13:25 +0200)]
build: Rename YASMDEP variable to DEPYASM for consistency
Martin Storsjö [Fri, 27 Jul 2012 17:24:53 +0000 (20:24 +0300)]
hls: Proceed to the next segment at any error code
Previously, we returned any error code except AVERROR_EOF to the
caller - only if AVERROR_EOF or 0 was returned, we proceeded to
the next segment.
With some setups of web servers, using Connection: close in https
and GnuTLS, we don't get a clean error code at the end of segments.
In those cases, just proceed to the next segment.
Tested-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Fri, 27 Jul 2012 17:22:51 +0000 (20:22 +0300)]
tls: Return AVERROR_EOF if the TLS_read/write functions return 0
OpenSSL returns 0 when the peer has closed the connection. GnuTLS
doesn't return that though, but returns
GNUTLS_E_UNEXPECTED_PACKET_LENGTH if the connection simply is closed
without a clean close notify packet.
Tested-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Ronald S. Bultje [Fri, 27 Jul 2012 05:19:19 +0000 (22:19 -0700)]
rv34: port x86 SIMD to cpuflags.
Ronald S. Bultje [Fri, 27 Jul 2012 05:09:46 +0000 (22:09 -0700)]
vp56: only compile MMX SIMD on x86-32.
All x86-64 CPUs have SSE2, so the MMX version will never be used. This
leads to smaller binaries.
Ronald S. Bultje [Fri, 27 Jul 2012 05:07:29 +0000 (22:07 -0700)]
vp56: port x86 simd to cpuflags.
Ronald S. Bultje [Fri, 27 Jul 2012 03:38:27 +0000 (20:38 -0700)]
proresdsp: port x86 assembly to cpuflags.
Justin Ruggles [Tue, 26 Jun 2012 20:50:10 +0000 (16:50 -0400)]
lavr: x86: improve non-SSE4 version of S16_TO_S32_SX macro
Removes a false dependency on existing contents of the 2nd dst register,
giving better performance for OOE.
Justin Ruggles [Sat, 14 Jul 2012 00:22:08 +0000 (20:22 -0400)]
lavfi: better channel layout negotiation
Allow substitution of channel pairs in the input for nearby channel pairs in
the output in order to get a closer match. Also weigh LFE channel mismatch
differently to favor matching the same layout without LFE over one less
channel with LFE.
Justin Ruggles [Fri, 20 Jul 2012 00:04:40 +0000 (20:04 -0400)]
alac: check for truncated packets
This will give a clearer error message when the error is caused by a
truncated packet.
Justin Ruggles [Thu, 19 Jul 2012 18:08:22 +0000 (14:08 -0400)]
alac: reverse lpc coeff order, simplify filter
Reversing the lpc coefficient order simplifies indexing in the filter.
Justin Ruggles [Mon, 7 May 2012 13:56:33 +0000 (09:56 -0400)]
lavr: add x86-optimized mixing functions
Adds optimized functions for mixing 3 through 8 input channels to 1 and 2
output channels in fltp or s16p format with flt coeffs.
Justin Ruggles [Tue, 19 Jun 2012 03:39:14 +0000 (23:39 -0400)]
x86: add support for fmaddps fma4 instruction with abstraction to avx/sse
Kostya Shishkov [Thu, 26 Jul 2012 17:42:22 +0000 (19:42 +0200)]
tscc2: fix typo in array index
Mans Rullgard [Fri, 20 Jul 2012 10:01:19 +0000 (11:01 +0100)]
build: use COMPILE template for HOSTOBJS
Signed-off-by: Mans Rullgard <mans@mansr.com>
Mans Rullgard [Fri, 20 Jul 2012 12:43:07 +0000 (13:43 +0100)]
build: do full flag handling for all compiler-type tools
This adds a full identification probe of CC, AS, LD and HOSTCC,
and sets up correct flags and dependency tracking for each.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Ronald S. Bultje [Thu, 26 Jul 2012 03:42:04 +0000 (20:42 -0700)]
eval: fix printing of NaN in eval fate test.
This fixes "make fate-eval" on MSVC builds. Without this, the test outputs
"-1.#NaN" instead of "nan" on MSVS 2010.
Diego Biurrun [Tue, 24 Jul 2012 17:16:29 +0000 (19:16 +0200)]
build: Rename aandct component to more descriptive aandcttables
Ronald S. Bultje [Thu, 26 Jul 2012 03:32:58 +0000 (20:32 -0700)]
mpegaudio: bury inline asm under HAVE_INLINE_ASM.
Ronald S. Bultje [Thu, 26 Jul 2012 03:52:16 +0000 (20:52 -0700)]
x86inc: automatically insert vzeroupper for YMM functions.
Samuel Pitoiset [Thu, 26 Jul 2012 18:45:42 +0000 (20:45 +0200)]
rtmp: Check the buffer length of ping packets
Signed-off-by: Martin Storsjö <martin@martin.st>
Samuel Pitoiset [Thu, 26 Jul 2012 12:05:58 +0000 (14:05 +0200)]
rtmp: Allow having more unknown data at the end of a chunk size packet without failing
Signed-off-by: Martin Storsjö <martin@martin.st>
Samuel Pitoiset [Thu, 26 Jul 2012 12:05:18 +0000 (14:05 +0200)]
rtmp: Prevent reading outside of an allocate buffer when receiving server bandwidth packets
Signed-off-by: Martin Storsjö <martin@martin.st>
Michael Bradshaw [Tue, 24 Jul 2012 17:43:06 +0000 (19:43 +0200)]
libopenjpeg: support YUV and deep RGB pixel formats
Based on FFmpeg version from
commit
3275981207e30e140cffaea334ac390f1a04266a
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Carl Eugen Hoyos [Mon, 23 Jul 2012 22:45:17 +0000 (18:45 -0400)]
Fix typo in v410 decoder.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
Anton Khirnov [Wed, 25 Jul 2012 06:42:27 +0000 (08:42 +0200)]
vf_yadif: unset cur_buf on the input link.
The buffer is stored internally, so this prevents it from being unreffed
automatically.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Anton Khirnov [Wed, 25 Jul 2012 06:42:26 +0000 (08:42 +0200)]
vf_overlay: ensure the overlay frame does not get leaked.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Michael Niedermayer [Wed, 25 Jul 2012 06:42:25 +0000 (08:42 +0200)]
vf_overlay: prevent premature freeing of cur_buf
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Antti Seppälä [Wed, 25 Jul 2012 09:43:39 +0000 (12:43 +0300)]
Support urlencoded http authentication credentials
It should be possible to specify usernames in http requests containing
urlencoded characters. This patch adds support for decoding the auth
strings.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Samuel Pitoiset [Wed, 25 Jul 2012 18:51:11 +0000 (20:51 +0200)]
rtmp: Return an error when the client bandwidth is incorrect
Signed-off-by: Martin Storsjö <martin@martin.st>
Samuel Pitoiset [Wed, 25 Jul 2012 18:51:10 +0000 (20:51 +0200)]
rtmp: Return proper error code in handle_server_bw
Signed-off-by: Martin Storsjö <martin@martin.st>
Samuel Pitoiset [Wed, 25 Jul 2012 18:51:09 +0000 (20:51 +0200)]
rtmp: Return proper error code in handle_client_bw
Signed-off-by: Martin Storsjö <martin@martin.st>
Samuel Pitoiset [Wed, 25 Jul 2012 18:51:08 +0000 (20:51 +0200)]
rtmp: Return proper error codes in handle_chunk_size
Signed-off-by: Martin Storsjö <martin@martin.st>
Justin Ruggles [Wed, 25 Jul 2012 18:49:40 +0000 (14:49 -0400)]
lavr: x86: add missing vzeroupper in ff_mix_1_to_2_fltp_flt()
Ronald S. Bultje [Tue, 24 Jul 2012 21:23:12 +0000 (21:23 +0000)]
vp8: Replace x*155/100 by x*101581>>16.
Idea stolen from webp (by Pascal Massimino) - because it's Cool.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Ronald S. Bultje [Sun, 22 Jul 2012 20:38:56 +0000 (20:38 +0000)]
vp3: don't use calls to inline asm in yasm code.
Mixing yasm and inline asm is a bad idea, since if either yasm or inline
asm is not supported by your toolchain, all of the asm stops working.
Thus, better to use either one or the other alone.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Ronald S. Bultje [Sun, 22 Jul 2012 21:14:20 +0000 (21:14 +0000)]
x86/dsputil: put inline asm under HAVE_INLINE_ASM.
This allows compiling with compilers that don't support gcc-style
inline assembly.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Yang Wang [Mon, 23 Jul 2012 22:51:10 +0000 (00:51 +0200)]
dsputil_mmx: fix incorrect assembly code
In ff_put_pixels_clamped_mmx(), there are two assembly code blocks.
In the first block (in the unrolled loop), the instructions
"movq 8%3, %%mm1 \n\t", and so forth, have problems.
From above instruction, it is clear what the programmer wants: a load from
p + 8. But this assembly code doesn’t guarantee that. It only works if the
compiler puts p in a register to produce an instruction like this:
"movq 8(%edi), %mm1". During compiler optimization, it is possible that the
compiler will be able to constant propagate into p. Suppose p = &x[10000].
Then operand 3 can become 10000(%edi), where %edi holds &x. And the instruction
becomes "movq 810000(%edx)". That is, it will stride by 810000 instead of 8.
This will cause a segmentation fault.
This error was fixed in the second block of the assembly code, but not in
the unrolled loop.
How to reproduce:
This error is exposed when we build using Intel C++ Compiler, with
IPO+PGO optimization enabled. Crashed when decoding an MJPEG video.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Samuel Pitoiset [Sat, 21 Jul 2012 10:59:58 +0000 (12:59 +0200)]
rtmp: Factorize the code by adding handle_invoke
Signed-off-by: Martin Storsjö <martin@martin.st>
Samuel Pitoiset [Sat, 21 Jul 2012 10:59:52 +0000 (12:59 +0200)]
rtmp: Factorize the code by adding handle_chunk_size
Signed-off-by: Martin Storsjö <martin@martin.st>
Samuel Pitoiset [Sat, 21 Jul 2012 10:59:51 +0000 (12:59 +0200)]
rtmp: Factorize the code by adding handle_ping
Signed-off-by: Martin Storsjö <martin@martin.st>
Samuel Pitoiset [Sat, 21 Jul 2012 10:59:50 +0000 (12:59 +0200)]
rtmp: Factorize the code by adding handle_client_bw
Signed-off-by: Martin Storsjö <martin@martin.st>
Samuel Pitoiset [Sat, 21 Jul 2012 10:59:49 +0000 (12:59 +0200)]
rtmp: Factorize the code by adding handle_server_bw
Signed-off-by: Martin Storsjö <martin@martin.st>
Samuel Pitoiset [Tue, 24 Jul 2012 14:29:40 +0000 (16:29 +0200)]
rtmp: Add a new option 'rtmp_pageurl'
This option specifies the URL of the web page in which the media
was embedded.
Signed-off-by: Martin Storsjö <martin@martin.st>