OSDN Git Service
Xin Li [Tue, 15 Jan 2019 00:14:40 +0000 (16:14 -0800)]
DO NOT MERGE - Merge pie-platform-release (PPRL.190105.001) into stage-aosp-master
Bug:
122685541
Change-Id: I579759f87bab672ef5189f9d13e8417651a04d60
Sal Savage [Mon, 14 Jan 2019 22:12:00 +0000 (14:12 -0800)]
Merge "Fix BT a bad/ out of bounds array read"
am:
7da7696e07
Change-Id: Idca50acaa84f59f95800e94a846247824d0341ef
android-build-team Robot [Mon, 14 Jan 2019 22:03:03 +0000 (22:03 +0000)]
Snap for
5230900 from
aa9c1b4abdb2ca7beea467f7be82e83363a32b11 to pi-platform-release
Change-Id: I50623117c36dbe20a0c8d120a7115628a2f53566
Sal Savage [Mon, 14 Jan 2019 21:43:55 +0000 (21:43 +0000)]
Merge "Fix BT a bad/ out of bounds array read"
Manoj Babulal [Mon, 14 Jan 2019 14:29:36 +0000 (06:29 -0800)]
Merge "SMP: Fix invalid auth_req in LE Security Request handler"
am:
6ab305324d
Change-Id: I408779f11d8778ebd188239e6a5f21e30d0f8f51
Treehugger Robot [Mon, 14 Jan 2019 14:23:01 +0000 (14:23 +0000)]
Merge "SMP: Fix invalid auth_req in LE Security Request handler"
Jakub Pawlowski [Mon, 14 Jan 2019 09:32:03 +0000 (01:32 -0800)]
Do not crash on LE Create Connection "Command Disallowed"
am:
9d52abf4d4
Change-Id: Ie2db913998282a20ccf66406ada730347f240e5f
Jakub Pawlowski [Thu, 3 Jan 2019 14:13:11 +0000 (15:13 +0100)]
Do not crash on LE Create Connection "Command Disallowed"
Being in "Connecting" used to mean we are either doing direct
connection, or background connection procedure. Now we have just one
connection procedure. This means there is no ambiguity when the
controller responds with "Command Disallowed" - we know exactly which
state to go back to.
Bug:
110412113
Bug:
112827989
Test: there is no test, or reproduction scenarion to verify that
Ran GattConnectTest for sanity
Change-Id: I9ed1cdc7ae4032cda4e8a166310eca0004c7f9dc
Manoj Babulal [Thu, 27 Dec 2018 10:43:19 +0000 (02:43 -0800)]
SMP: Fix invalid auth_req in LE Security Request handler
Due to wrong pointer de-reference, auth_req value read
in smp_proc_sec_req (LE Security Request packet handler)
was invalid.
Logcat trace shows invalid auth_req value:
.. bt_smp : smp_proc_sec_req: auth_req=0xf9
....
.. bt_smp : smp_proc_sec_req: auth_req=0xe9
After the fix, auth_req value is correct:
.. bt_smp : smp_proc_sec_req: auth_req=0x1
....
.. bt_smp : smp_proc_sec_req: auth_req=0x5
This data flow can be traced in code on this path:
smp_data_received -> smp_sm_event -> smp_proc_sec_req
Issue seen after following change:
https://android-review.googlesource.com/c/platform/system/bt/+/492442
Issue was discovered during execution of PTS test
cases GAP/SEC/AUT/BV-13-C and GAP/SEC/AUT/BV-14-C.
Fixes:
122066779
Test: Verified logcat trace shows valid auth_req
value prints from smp_proc_sec_req() function
Change-Id: I072b4794fb56a05b7ac7f2f4ca606514d7524550
Adam Seaton [Fri, 11 Jan 2019 22:55:24 +0000 (22:55 +0000)]
January Pi-platform-release merges
Change-Id: Id66375f8b1f3329e82df3d0fdb06917c065209de
Sal Savage [Wed, 9 Jan 2019 20:50:07 +0000 (12:50 -0800)]
Fix BT a bad/ out of bounds array read
Bug:
121375525
Test: Used automotive hardware and verified that pairing and media
streaming and control still work and crashes no longer happen.
Change-Id: I3476425131718aded980f57a8b9be92a8e9f9d3b
Jakub Pawlowski [Fri, 11 Jan 2019 16:55:05 +0000 (08:55 -0800)]
Fix potential NULL dereference in smp_proc_confirm
am:
3c3fbd869f
Change-Id: I1b3175cb9a393da80adc52c886993af89788e48c
Jakub Pawlowski [Fri, 11 Jan 2019 12:43:33 +0000 (13:43 +0100)]
Fix potential NULL dereference in smp_proc_confirm
Bug:
122102910
Test: compilation
Change-Id: Idd16e1c1924165924847f1aad64ddd44a8a1b8ab
Jack He [Fri, 11 Jan 2019 00:38:51 +0000 (16:38 -0800)]
Merge "Fix bt_trace.h #define"
am:
fa41623e98
Change-Id: I5bafe65f8e17b3daaae84d569878ba27a4ad2407
Treehugger Robot [Fri, 11 Jan 2019 00:21:24 +0000 (00:21 +0000)]
Merge "Fix bt_trace.h #define"
Dan Shi [Thu, 10 Jan 2019 23:00:45 +0000 (15:00 -0800)]
Add host tests to TEST_MAPPING
am:
491407dbad
Change-Id: I09538ad40d6d5c02f83fe9c870711ebbd7004c1e
Dan Shi [Thu, 10 Jan 2019 18:55:23 +0000 (10:55 -0800)]
Add host tests to TEST_MAPPING
Also added some missing test_suites setting.
Following tests don't have host_supported set to true in Android.bp:
net_test_audio_a2dp_hw
net_test_btif
net_test_btif_profile_queue
net_test_device
net_test_hci
net_test_stack
net_test_stack_ad_parser
net_test_stack_smp
Following tests failed to run in host with error "did not report any run":
net_test_performance
net_test_stack_rfcomm
Bug:
111921389
Test: system/bt$ atest --host :postsubmit
Change-Id: I5f55cead7a2ad1cadea48220f45781f4f74949dd
Jack He [Thu, 10 Jan 2019 04:47:57 +0000 (20:47 -0800)]
Fix bt_trace.h #define
Test: make
Change-Id: Ie1177f2311db0b7b5dfb440f3f982d4a79aa460d
Jack He [Thu, 10 Jan 2019 04:51:00 +0000 (20:51 -0800)]
Remove code related to Health Device Profile and MCAP Protocol
am:
238f8359a9
Change-Id: Ib10cda753d45163b4d799ca4c1275fb43284c336
Jack He [Fri, 4 Jan 2019 01:11:24 +0000 (17:11 -0800)]
Remove code related to Health Device Profile and MCAP Protocol
* Health Device Profile (HDP) and MCAP protocol has been largely
replaced by BLE. New applications should use Bluetooth Low Energy
instead of legacy Bluetooth Health Device Profile
Bug:
111562841
Test: make, unit test, use Bluetooth
Change-Id: I3da1173a8a928af4b26a29e71746241c22af2236
Merged-In: I3da1173a8a928af4b26a29e71746241c22af2236
(cherry picked from commit
dc13609b58b2f6c6185951f650036f5098e19e92)
Jack He [Wed, 9 Jan 2019 22:16:44 +0000 (14:16 -0800)]
Merge "HCI: Simplify btu_hcif_hdl_command_status()"
am:
e5e0a70209
Change-Id: Icc28b7e93f3f94b82bdbfc7ab923b12b985fdff3
Treehugger Robot [Wed, 9 Jan 2019 21:59:39 +0000 (21:59 +0000)]
Merge "HCI: Simplify btu_hcif_hdl_command_status()"
Stanley Tng [Wed, 9 Jan 2019 17:47:12 +0000 (09:47 -0800)]
Merge "Group all Hearing Aids device information together"
am:
89be950b16
Change-Id: I803e04fb6d5f7322eea16aa2f9d3637643a8f00f
Treehugger Robot [Wed, 9 Jan 2019 17:36:40 +0000 (17:36 +0000)]
Merge "Group all Hearing Aids device information together"
Jack He [Wed, 9 Jan 2019 01:48:20 +0000 (17:48 -0800)]
HCI: Simplify btu_hcif_hdl_command_status()
* Move 2nd layer switch statements into top layer
* Check if p_cmd is nullptr at the beginning of the function so
that each case does not need to check it individually. p_cmd
is never null.
* Skip parameter total length at beginning of the function
Test: make, unit test, use Bluetooth for music and calls
Change-Id: I23cf983a1ade44bcea0b1009860efdfaf3b8bca8
Jack He [Wed, 9 Jan 2019 05:14:52 +0000 (21:14 -0800)]
HCI: Fix command status handling of HCI_QOS_SETUP
am:
256800be50
Change-Id: I13000c98920ea2b4e7816b47a41352f271af2943
Jack He [Wed, 9 Jan 2019 02:02:03 +0000 (18:02 -0800)]
Remove BTM_SCO_WAKE_PARKED_LINK flag
am:
5213da9b4a
Change-Id: Id7868b58ada9e819fb8cb2fbb93ca5c874d0089d
Jack He [Wed, 9 Jan 2019 01:53:31 +0000 (17:53 -0800)]
HCI: Fix command status handling of HCI_QOS_SETUP
* QOS setup complete event was handled instead of QOS setup command
Test: make
Change-Id: I894099f369675bd25397ee0005c6838f39220eed
Stanley Tng [Fri, 21 Dec 2018 00:44:15 +0000 (16:44 -0800)]
Group all Hearing Aids device information together
A small refactor where the various information about a Hearing Aids
device is gathered into a class. Instead of passing a long list
of function parameters, it is cleaner to group them inside a single
class. It also makes it easier to add new elements in the future.
Test: Manual pair and audio stream with Hearing Aids
Bug:
119617521
Change-Id: I193b5cc915a6c36e7e36d1f06a5adcda7c17ab1c
Jack He [Sat, 5 Jan 2019 00:18:12 +0000 (16:18 -0800)]
Remove BTM_SCO_WAKE_PARKED_LINK flag
* Under majority of configurations, SCO connection can only be created
if in non-parked mode since SCO is a circuit switch link
Bug:
122375953
Test: make
Change-Id: I58569025b435953b964e5aded64b3ace27d4e73c
Jakub Pawlowski [Tue, 8 Jan 2019 02:39:29 +0000 (18:39 -0800)]
Clean up BLE connection state state machine
am:
cf7b381ce8
Change-Id: Ic045afbd0b7aa44b471b4f8c63c4adc6fab96989
Jakub Pawlowski [Wed, 2 Jan 2019 23:41:53 +0000 (00:41 +0100)]
Clean up BLE connection state state machine
* get rid of BLE_DIR_CONN - we never go into this state any more
* BLE_BG_CONN -> BLE_CONNECTING
* use btm_ble_get_conn_st instead of directly accessing control block
Test: compilation
Bug:
112827989
Change-Id: I4aa09a8b558c6f2161806a6d27bee0560fd19fd8
Jakub Pawlowski [Mon, 7 Jan 2019 10:59:10 +0000 (02:59 -0800)]
Move all HCI LE Create Connection management into single file
am:
a3580922c4
Change-Id: I96f122540d82b5f564023f3f2ff3d7b1a64b7a47
Jakub Pawlowski [Mon, 31 Dec 2018 11:54:04 +0000 (12:54 +0100)]
Move all HCI LE Create Connection management into single file
Currently handling of LE Create Connection, LE Create Connection
Cancel, LE Connection Complete and other HCI commands related to LE
connection establishment is in two separate files.
Move all this code into single file.
Bug:
112827989
Test: compilation
Change-Id: Ibc2f6ca2324f4df8a23c2722762d0e5297782b33
Jack He [Thu, 3 Jan 2019 18:52:18 +0000 (10:52 -0800)]
Remove BTM_SCO_INCLUDED flag
am:
050ef35fde
Change-Id: Id88e1c8b8e75764ede1b4d869ebaf1af4fb8ff8a
Jack He [Thu, 3 Jan 2019 01:38:53 +0000 (17:38 -0800)]
Remove BTM_SCO_INCLUDED flag
* Instead of removing SCO related code during compilation, platforms
should chose not to call SCO related methods when SCO is not supported
* For example, platforms can choose to not initialize HFP to avoid using
SCO commands
* This CL removes BTM_SCO_INCLUDED compile time flag to simplify code
flow and improve readability
Bug:
122279647
Test: mm -j40; run Bluetooth stack and make phone call
Change-Id: I67d290839091f66c289a428496304c8b3e1dbe21
Jakub Pawlowski [Mon, 31 Dec 2018 15:21:04 +0000 (07:21 -0800)]
Remove connection_manager from gatt namespace
am:
f20d94aeb8
Change-Id: I04df3ae34e992e68297e3704000d7f30c176bcad
Jakub Pawlowski [Fri, 28 Dec 2018 18:03:09 +0000 (19:03 +0100)]
Remove connection_manager from gatt namespace
connection_manager handles more than GATT. Celanup naming.
Bug:
112827989
Test: compilation
Change-Id: Id5fdfacb12921cff04204cf2589f73a7c6a0d01f
Jakub Pawlowski [Fri, 28 Dec 2018 21:25:05 +0000 (13:25 -0800)]
Get rid of is_ble_connecting and ble_connecting_bda
am:
23572544ba
Change-Id: Ib22fc7e693d9fdf31273b19c0a102aaf8c98bb38
Jakub Pawlowski [Fri, 28 Dec 2018 21:24:53 +0000 (13:24 -0800)]
Use conneciton_manager for all LE connection establishment
am:
ada2b3ee07
Change-Id: I3fd558723f18737fffb0fa7270c306cfd8aed5de
Jakub Pawlowski [Fri, 28 Dec 2018 21:24:41 +0000 (13:24 -0800)]
Get rid of direct connect queueing logic
am:
672d7b1f37
Change-Id: I43fd40bf6cf683843cbae944211b0a6b9430fb01
Jakub Pawlowski [Thu, 27 Dec 2018 20:02:13 +0000 (21:02 +0100)]
Get rid of is_ble_connecting and ble_connecting_bda
These variables make no sense any more, as we might be attempting
multiple connections at the same time.
Test: sl4a GattConnectTest, manual bonding test
Bug:
112827989
Change-Id: I7e1d01e8d80383b49ff9c20fb3758cef03c52882
Jakub Pawlowski [Wed, 19 Dec 2018 21:23:47 +0000 (22:23 +0100)]
Use conneciton_manager for all LE connection establishment
Test: sl4a GattConnectTest, manual bonding test
Bug:
112827989
Change-Id: I55878e03d268c43002e22ce4ebfbf0e334523882
Jakub Pawlowski [Mon, 17 Dec 2018 12:59:54 +0000 (13:59 +0100)]
Get rid of direct connect queueing logic
Instead of queueing requests, we should use whitelist to process the
requests simulteanously.
This patch does remove the queueing logic, succeeding patch will add the
logic to schedule through whitelist.
Test: compilation
Bug:
112827989
Change-Id: Ia7132812f704658ecb6919e52c70b291e6874660
Jakub Pawlowski [Fri, 21 Dec 2018 22:23:16 +0000 (14:23 -0800)]
Call btm_ble_set_conn_st before on_connection_complete
am:
a22a78f3b3
Change-Id: I97d4f45aa54e6798204e0227c69ac91621294501
Jakub Pawlowski [Fri, 21 Dec 2018 16:16:01 +0000 (17:16 +0100)]
Call btm_ble_set_conn_st before on_connection_complete
on_connection_complete can trigger BTM_WhiteListRemove, which sends
"LE Create Connection Cancel" if the connection is pending.
Make sure connection state is updated before calling on_connection_complete.
Otherwise we send an unnecessary "LE Create Connection Cancel" request.
Bug:
112827989
Test: establish Direct connection with at least one device in the
background connection procedure. Verify HCI snoop log content
Change-Id: I1b8532f4e58d5ab62b471ce0bde6c48640c83ff7
Jakub Pawlowski [Thu, 20 Dec 2018 21:12:05 +0000 (13:12 -0800)]
Merge code in scanner/advertiser connection complete handler
am:
c8dfd0fb06
Change-Id: Ibaed9f65f68cedf670ac4f6d9c0f19c36ea45243
Jakub Pawlowski [Thu, 20 Dec 2018 21:11:52 +0000 (13:11 -0800)]
Unify code in scanner/advertiser connection complete handler.
am:
b295c481dd
Change-Id: I000cfd81b6caace4b6046b9a6757c4fc589cb0a4
Jakub Pawlowski [Thu, 20 Dec 2018 18:34:22 +0000 (10:34 -0800)]
Split l2cu_create_conn into two separate, transport-specific functions
am:
50a0ec23d7
Change-Id: I01f507afca510252ee1c294e953506b3301a9637
Jakub Pawlowski [Fri, 14 Dec 2018 18:53:59 +0000 (19:53 +0100)]
Merge code in scanner/advertiser connection complete handler
Test: sl4a GattConnectTest
Bug:
112827989
Change-Id: I860693c11c263643858cfa0b4e4deb6a9f231cdd
Jakub Pawlowski [Fri, 14 Dec 2018 18:38:44 +0000 (19:38 +0100)]
Unify code in scanner/advertiser connection complete handler.
btm_ble_set_conn_st is called in every possible scenario of
l2cble_scanner_conn_comp. Call it at start, instead of before each
return.
Test: sl4a GattConnectTest
Bug:
112827989
Change-Id: I969fc59b934dc1c7a52be00741fdf38402545b26
Jakub Pawlowski [Fri, 14 Dec 2018 14:15:54 +0000 (15:15 +0100)]
Split l2cu_create_conn into two separate, transport-specific functions
There is no common logic between LE and BR/EDR paths.
Test: compilation
Bug:
112827989
Change-Id: I507d3a0d8efa0e4936b22722a9c1cc846e0be3bd
Ted Wang [Thu, 20 Dec 2018 06:31:27 +0000 (22:31 -0800)]
Merge "Fix mtu assignment with correct value"
am:
55c0aa19be
Change-Id: I3cc2bed544165ee45dbf7646ab13ac4258ce2ab2
Ted Wang [Thu, 20 Dec 2018 06:16:47 +0000 (06:16 +0000)]
Merge "Fix mtu assignment with correct value"
Nick Kralevich [Thu, 20 Dec 2018 00:12:10 +0000 (16:12 -0800)]
Merge "use epoll_create1"
am:
b0cbd21cb2
Change-Id: Ie4a8c3462707aedc9676340ae06487f615e32776
Treehugger Robot [Wed, 19 Dec 2018 23:51:28 +0000 (23:51 +0000)]
Merge "use epoll_create1"
Hansong Zhang [Wed, 19 Dec 2018 22:09:47 +0000 (14:09 -0800)]
Enable BLE background connection when stack is started
am:
f91d55816c
Change-Id: Idc622903ea84149956bcbb13daa0903ab8396e78
Hansong Zhang [Tue, 17 Jul 2018 23:24:24 +0000 (16:24 -0700)]
Enable BLE background connection when stack is started
Remove variable btm_cb.ble_ctr_cb.bg_conn_type. We can enable the
background mode when the Bluetooth stack is started and don't have
to wait until the first background connection request from HID
Device/Hearing Aid/GATT. As soon as we add the first device to white
list, the stack will send HCI Create Connection (White List) command.
Test: manual. Bond to a BLE mouse and turn off/on Bluetooth. Also test
with initiating another direct/white list connection while another white
list connection is pending
Bug:
111562702
Bug:
112827989
Change-Id: I82a476489d181d17aa1c1da8202df1be76928d77
Jakub Pawlowski [Wed, 19 Dec 2018 19:20:21 +0000 (11:20 -0800)]
Revert "Remove redundant GATT_StartIf"
am:
b22ea41685
Change-Id: I4fba57ad6c2f856109afb74331bdf3e621794899
Jakub Pawlowski [Wed, 19 Dec 2018 12:43:03 +0000 (13:43 +0100)]
Revert "Remove redundant GATT_StartIf"
This change broke initial HID connection.
This reverts commit
cb45b1e380126f300d9f7d89a8382438c5d06cd3.
Stanley Tng [Tue, 18 Dec 2018 21:17:20 +0000 (13:17 -0800)]
Merge "Add stng@google.com to the OWNERS list"
am:
efc194ae59
Change-Id: I042d5406886c56f1e7fd2fc52ea46f9c7358a970
Treehugger Robot [Tue, 18 Dec 2018 21:11:28 +0000 (21:11 +0000)]
Merge "Add stng@google.com to the OWNERS list"
Dan Shi [Tue, 18 Dec 2018 19:21:54 +0000 (11:21 -0800)]
Merge "Add a host test for net_test_avrcp"
am:
9f3afe4957
Change-Id: Ia2cae467aabd10bd9b713bc8c108ca1c297ca8fa
Treehugger Robot [Tue, 18 Dec 2018 19:05:15 +0000 (19:05 +0000)]
Merge "Add a host test for net_test_avrcp"
Stanley Tng [Tue, 18 Dec 2018 18:05:38 +0000 (10:05 -0800)]
Merge "Make sure Hearing Aids' Connection Intervals is unchanged"
am:
be5124ed3d
Change-Id: I8179c5990b1329874a2f5f3d9d5b926f4708e933
Treehugger Robot [Tue, 18 Dec 2018 17:04:26 +0000 (17:04 +0000)]
Merge "Make sure Hearing Aids' Connection Intervals is unchanged"
Ted Wang [Tue, 18 Dec 2018 02:31:06 +0000 (10:31 +0800)]
Fix mtu assignment with correct value
Assigned mtu value with correspond avct channel configuration
Bug:
120524683
Test: manual
Change-Id: Idb70c678cef1d704e232aef8706082a48b073ef8
Stanley Tng [Tue, 28 Aug 2018 23:06:55 +0000 (16:06 -0700)]
Add stng@google.com to the OWNERS list
Test: N/A
Change-Id: Ic164086fc97fa72aa68ad751b35f339fa71233bb
Nick Kralevich [Mon, 17 Dec 2018 17:09:43 +0000 (09:09 -0800)]
use epoll_create1
epoll_create leaks file descriptors. Use epoll_create1(EPOLL_CLOEXEC)
instead.
Bug:
120983106
Test: compiles and boots
Change-Id: I40abaaea6dad641dc03d141adb29e963e853edc4
Stanley Tng [Fri, 14 Dec 2018 01:31:31 +0000 (17:31 -0800)]
Make sure Hearing Aids' Connection Intervals is unchanged
Make sure that the connection interval of the LE Connection remains the
desired one and reset it if this interval gets changed.
Test: Manual with Hearing Aids device and repeated
connection/disconnection
Bug:
117886712
Change-Id: Id11d1d2e7901bfbbc9c452b94aba968afbc52ee0
Dan Shi [Sat, 15 Dec 2018 01:17:40 +0000 (17:17 -0800)]
Add a host test for net_test_avrcp
Bug:
111921389
Test: atest
Change-Id: I26e4036bb76271ac6181429c904efe0f8b438256
Dan Shi [Sat, 15 Dec 2018 01:12:41 +0000 (17:12 -0800)]
Merge "List test_config_template to android platform only."
am:
d41f810b28
Change-Id: I131e44269981e905f6d4917f86a906d8dd0edd86
Dan Shi [Sat, 15 Dec 2018 01:03:29 +0000 (01:03 +0000)]
Merge "List test_config_template to android platform only."
Dan Shi [Fri, 14 Dec 2018 17:56:36 +0000 (09:56 -0800)]
List test_config_template to android platform only.
This allows host side test config to be auto-generated from the right
template.
Bug:
120993548
Test: m -j net_test_avrcp && atest net_test_avrcp --host
Change-Id: I003713ea3c1c4c1c0686551828d817227ec19019
Jakub Pawlowski [Fri, 14 Dec 2018 09:56:57 +0000 (01:56 -0800)]
Use White List for direct connection establishment to multiple devices
am:
cab1ae1127
Change-Id: I72d61ae5db9a9924fa10c23b74794be56370035c
Jakub Pawlowski [Fri, 14 Dec 2018 08:54:00 +0000 (00:54 -0800)]
Remove unused battery level support
am:
c79ab7241c
Change-Id: Ia624db04e97c94e0b93f1a95723318d36b243743
Jakub Pawlowski [Fri, 14 Dec 2018 08:53:43 +0000 (00:53 -0800)]
Merge "Remove redundant GATT_StartIf"
am:
76037ac30a
Change-Id: I77e6f64ea666ce524fc11df625304db0c7f0d136
Jakub Pawlowski [Wed, 14 Nov 2018 15:15:04 +0000 (16:15 +0100)]
Use White List for direct connection establishment to multiple devices
Currently, we implement GAP Direct Connect procedure exactly as the spec
says: we attempt connection to just one device.
This means that an app doing Direct Connection can take over the ability
to establish connections, and if it repeats the request, can cause other
devices to not connect.
From now on, we will use White List for both Background and Direct
connections. When there is at least one direct connection, we will
increase the scan parameters used for connection.
Bug:
112827989
Test: added unittests, also sl4a GattConnectTest
Change-Id: Ic0b2f631e3c84d5e8e0f4683b0148f031bfd5639
Jakub Pawlowski [Thu, 13 Dec 2018 23:27:11 +0000 (00:27 +0100)]
Remove unused battery level support
Change-Id: I88239a835562a5e3c32b830e4c2c31fed1f107b3
Jakub Pawlowski [Fri, 14 Dec 2018 08:40:04 +0000 (08:40 +0000)]
Merge "Remove redundant GATT_StartIf"
Jakub Pawlowski [Thu, 13 Dec 2018 16:53:15 +0000 (17:53 +0100)]
Remove redundant GATT_StartIf
GATT_StartIf is just sending connect callback about all currently
connected devices, even ones that this app is not interested in.
For btif/java apps, we will trigger connection attempt to just one
device right after registration, which would trigger connect callback
anyway.
For all bta layer apps, they do guard inside connect callback to make
sure code is triggered for already known device, but the devices are
considered as known only after they already connected, and some event
triggered app to create control block.
Thus, GATT_StartIf is surplus feature that should be removed.
Test: run all sl4a GATT tests
Change-Id: I8c45b92dbbf80894c32bb870eb392e766063c934
Zach Johnson [Thu, 13 Dec 2018 21:49:38 +0000 (13:49 -0800)]
Merge "Pass package name as a part of startDiscovery"
am:
62e1f765bc
Change-Id: I3911f27f80b99ab28c91bd8a56cceefba5357fe6
Xin Li [Thu, 13 Dec 2018 21:27:59 +0000 (13:27 -0800)]
[automerger skipped] Merge "DO NOT MERGE - Merge pie-platform-release (PPRL.181205.001) into master"
am:
cb7dcad70d -s ours
Change-Id: I3937cd25882e43468acb0d0192a5ccd34aa59091
Xin Li [Thu, 13 Dec 2018 19:25:51 +0000 (11:25 -0800)]
[automerger skipped] DO NOT MERGE - Merge pie-platform-release (PPRL.181205.001) into master
am:
1083b621e4 -s ours
Change-Id: I050265331bd4a18405f7d6f93b03125a1fc659ae
Chih-Hung Hsieh [Thu, 13 Dec 2018 18:48:26 +0000 (10:48 -0800)]
Fix performance-for-range-copy warnings
am:
01a40403d7
Change-Id: Ife0d8af7af4a5ac26dfe7d735bbc65460d1beb70
Treehugger Robot [Thu, 13 Dec 2018 12:42:58 +0000 (12:42 +0000)]
Merge "Pass package name as a part of startDiscovery"
Treehugger Robot [Thu, 13 Dec 2018 05:45:20 +0000 (05:45 +0000)]
Merge "DO NOT MERGE - Merge pie-platform-release (PPRL.181205.001) into master"
Zach Johnson [Thu, 13 Dec 2018 01:13:29 +0000 (17:13 -0800)]
Pass package name as a part of startDiscovery
Test: manual
Bug:
118347252
Change-Id: I52adf73009a9766ad9aabf41657187343a2d0f41
Chih-Hung Hsieh [Wed, 12 Dec 2018 22:30:52 +0000 (14:30 -0800)]
Fix performance-for-range-copy warnings
Bug:
30413223
Test: make with WITH_TIDY=1 DEFAULT_GLOBAL_TIDY_CHECKS=-*,performance*
Change-Id: I7d5537c24c39d5c42ac17c8a67646e4b9321d6bb
Jakub Pawlowski [Wed, 12 Dec 2018 08:30:59 +0000 (00:30 -0800)]
Turn stack/gatt/conneciton_manager.cc into text file
am:
fef2539cd2
Change-Id: I95b2a8c2136819491f4aafc38e6fb0a782e898ec
Jakub Pawlowski [Tue, 11 Dec 2018 20:53:58 +0000 (21:53 +0100)]
Turn stack/gatt/conneciton_manager.cc into text file
Change-Id: I031bfaa1745de55aeb0a0dbde3a7a67be0f9c982
Myles Watson [Wed, 12 Dec 2018 05:14:36 +0000 (21:14 -0800)]
Merge changes I7f8b5cfd,I68d65028
am:
1b29fe6e18
Change-Id: I00f505eb8b71e21e6a2bc778e41ee9a0f8e35fc3
Treehugger Robot [Wed, 12 Dec 2018 05:05:27 +0000 (05:05 +0000)]
Merge changes I7f8b5cfd,I68d65028
* changes:
test_vendor: Add PacketBuilder classes
test_vendor: Add PacketView for copyless parsing
Xin Li [Tue, 11 Dec 2018 22:45:08 +0000 (14:45 -0800)]
DO NOT MERGE - Merge pie-platform-release (PPRL.181205.001) into master
Bug:
120502534
Change-Id: Icdcf2220fd28f92b182da73bee207151e80db295
TreeHugger Robot [Tue, 11 Dec 2018 21:49:24 +0000 (21:49 +0000)]
Merge "DO NOT MERGE - Merge pie-platform-release (PPRL.181205.001) into stage-aosp-master" into stage-aosp-master
Zach Johnson [Tue, 11 Dec 2018 08:26:18 +0000 (00:26 -0800)]
Merge "OWNERS -eisenbach, +zachoverflow"
am:
55c7b8ba5d
Change-Id: Ib3b6c7398a8a749ab6e19d202cde14250d3024dd
Zach Johnson [Tue, 11 Dec 2018 04:21:52 +0000 (04:21 +0000)]
Merge "OWNERS -eisenbach, +zachoverflow"
Xin Li [Mon, 10 Dec 2018 22:22:38 +0000 (14:22 -0800)]
DO NOT MERGE - Merge pie-platform-release (PPRL.181205.001) into stage-aosp-master
Bug:
120502534
Change-Id: I71b31fb1bf8a4c2b2f471b54b5a74bc2191c9693
Jakub Pawlowski [Tue, 11 Dec 2018 00:20:46 +0000 (16:20 -0800)]
Fix GATT not working due to address mismatch
am:
f4b2f61690
Change-Id: Id435aecebda5a8cb5195353616bbfeb8ec9a87ec
Myles Watson [Wed, 14 Nov 2018 00:56:38 +0000 (16:56 -0800)]
test_vendor: Add PacketBuilder classes
Templated PacketBuilder class for inserting fixed width
types with the correct endianness.
Test: rootcanal-packets_test_host --gtest_filter=*PacketBuilderEndian*
Change-Id: I7f8b5cfd225ebae35f310b44fc0782b940a23007