OSDN Git Service
Linus Torvalds [Sun, 22 Nov 2020 19:58:49 +0000 (11:58 -0800)]
Merge tag 'staging-5.10-rc5' of git://git./linux/kernel/git/gregkh/staging
Pull staging and IIO fixes from Greg KH:
"Here are some small Staging and IIO driver fixes for 5.10-rc5. They
include:
- IIO fixes for reported regressions and problems
- new device ids for IIO drivers
- new device id for rtl8723bs driver
- staging ralink driver Kconfig dependency fix
- staging mt7621-pci bus resource fix
All of these have been in linux-next all week with no reported issues"
* tag 'staging-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: accel: kxcjk1013: Add support for KIOX010A ACPI DSM for setting tablet-mode
iio: accel: kxcjk1013: Replace is_smo8500_device with an acpi_type enum
docs: ABI: testing: iio: stm32: remove re-introduced unsupported ABI
iio: light: fix kconfig dependency bug for VCNL4035
iio/adc: ingenic: Fix AUX/VBAT readings when touchscreen is used
iio/adc: ingenic: Fix battery VREF for JZ4770 SoC
staging: rtl8723bs: Add 024c:0627 to the list of SDIO device-ids
staging: ralink-gdma: fix kconfig dependency bug for DMA_RALINK
staging: mt7621-pci: avoid to request pci bus resources
iio: imu: st_lsm6dsx: set 10ms as min shub slave timeout
counter/ti-eqep: Fix regmap max_register
iio: adc: stm32-adc: fix a regression when using dma and irq
iio: adc: mediatek: fix unset field
iio: cros_ec: Use default frequencies when EC returns invalid information
Linus Torvalds [Sun, 22 Nov 2020 19:52:10 +0000 (11:52 -0800)]
Merge tag 'tty-5.10-rc5' of git://git./linux/kernel/git/gregkh/tty
Pull tty fixes from Greg KH:
"Here are some small tty/serial fixes for 5.10-rc5 that resolve some
reported issues:
- speakup crash when telling the kernel to use a device that isn't
really there
- imx serial driver fixes for reported problems
- ar933x_uart driver fix for probe error handling path
All have been in linux-next for a while with no reported issues"
* tag 'tty-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: ar933x_uart: disable clk on error handling path in probe
tty: serial: imx: keep console clocks always on
speakup: Do not let the line discipline be used several times
tty: serial: imx: fix potential deadlock
Linus Torvalds [Sun, 22 Nov 2020 19:39:32 +0000 (11:39 -0800)]
Merge tag 'ext4_for_linus_fixes2' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A final set of miscellaneous bug fixes for ext4"
* tag 'ext4_for_linus_fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix bogus warning in ext4_update_dx_flag()
jbd2: fix kernel-doc markups
ext4: drop fast_commit from /proc/mounts
David Howells [Sun, 22 Nov 2020 13:13:45 +0000 (13:13 +0000)]
afs: Fix speculative status fetch going out of order wrt to modifications
When doing a lookup in a directory, the afs filesystem uses a bulk
status fetch to speculatively retrieve the statuses of up to 48 other
vnodes found in the same directory and it will then either update extant
inodes or create new ones - effectively doing 'lookup ahead'.
To avoid the possibility of deadlocking itself, however, the filesystem
doesn't lock all of those inodes; rather just the directory inode is
locked (by the VFS).
When the operation completes, afs_inode_init_from_status() or
afs_apply_status() is called, depending on whether the inode already
exists, to commit the new status.
A case exists, however, where the speculative status fetch operation may
straddle a modification operation on one of those vnodes. What can then
happen is that the speculative bulk status RPC retrieves the old status,
and whilst that is happening, the modification happens - which returns
an updated status, then the modification status is committed, then we
attempt to commit the speculative status.
This results in something like the following being seen in dmesg:
kAFS: vnode modified {100058:861} 8->9 YFS.InlineBulkStatus
showing that for vnode 861 on volume 100058, we saw YFS.InlineBulkStatus
say that the vnode had data version 8 when we'd already recorded version
9 due to a local modification. This was causing the cache to be
invalidated for that vnode when it shouldn't have been. If it happens
on a data file, this might lead to local changes being lost.
Fix this by ignoring speculative status updates if the data version
doesn't match the expected value.
Note that it is possible to get a DV regression if a volume gets
restored from a backup - but we should get a callback break in such a
case that should trigger a recheck anyway. It might be worth checking
the volume creation time in the volsync info and, if a change is
observed in that (as would happen on a restore), invalidate all caches
associated with the volume.
Fixes:
5cf9dd55a0ec ("afs: Prospectively look up extra files when doing a single lookup")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 21 Nov 2020 18:36:25 +0000 (10:36 -0800)]
Merge tag 'xfs-5.10-fixes-7' of git://git./fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"The critical fixes are for a crash that someone reported in the xattr
code on 32-bit arm last week; and a revert of the rmap key comparison
change from last week as it was totally wrong. I need a vacation. :(
Summary:
- Fix various deficiencies in online fsck's metadata checking code
- Fix an integer casting bug in the xattr code on 32-bit systems
- Fix a hang in an inode walk when the inode index is corrupt
- Fix error codes being dropped when initializing per-AG structures
- Fix nowait directio writes that partially succeed but return EAGAIN
- Revert last week's rmap comparison patch because it was wrong"
* tag 'xfs-5.10-fixes-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: revert "xfs: fix rmap key and record comparison functions"
xfs: don't allow NOWAIT DIO across extent boundaries
xfs: return corresponding errcode if xfs_initialize_perag() fail
xfs: ensure inobt record walks always make forward progress
xfs: fix forkoff miscalculation related to XFS_LITINO(mp)
xfs: directory scrub should check the null bestfree entries too
xfs: strengthen rmap record flags checking
xfs: fix the minrecs logic when dealing with inode root child blocks
Linus Torvalds [Sat, 21 Nov 2020 18:33:33 +0000 (10:33 -0800)]
Merge tag 'fsnotify_for_v5.10-rc5' of git://git./linux/kernel/git/jack/linux-fs
Pull fanotify fix from Jan Kara:
"A single fanotify fix from Amir"
* tag 'fsnotify_for_v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: fix logic of reporting name info with watched parent
Linus Torvalds [Sat, 21 Nov 2020 18:24:05 +0000 (10:24 -0800)]
Merge tag 'seccomp-v5.10-rc5' of git://git./linux/kernel/git/kees/linux
Pull seccomp fixes from Kees Cook:
"This gets the seccomp selftests running again on powerpc and sh, and
fixes an audit reporting oversight noticed in both seccomp and ptrace.
- Fix typos in seccomp selftests on powerpc and sh (Kees Cook)
- Fix PF_SUPERPRIV audit marking in seccomp and ptrace (Mickaël
Salaün)"
* tag 'seccomp-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: sh: Fix register names
selftests/seccomp: powerpc: Fix typo in macro variable name
seccomp: Set PF_SUPERPRIV when checking capability
ptrace: Set PF_SUPERPRIV when checking capability
Linus Torvalds [Sat, 21 Nov 2020 00:24:28 +0000 (16:24 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Fixes for two fairly obscure but annoying when triggered races in
iSCSI"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: iscsi: Fix cmd abort fabric stop race
scsi: libiscsi: Fix NOP race condition
Linus Torvalds [Fri, 20 Nov 2020 20:03:40 +0000 (12:03 -0800)]
Merge tag 'block-5.10-2020-11-20' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph:
- Doorbell Buffer freeing fix (Minwoo Im)
- CSE log leak fix (Keith Busch)
- blk-cgroup hd_struct leak fix (Christoph)
- Flush request state fix (Ming)
- dasd NULL deref fix (Stefan)
* tag 'block-5.10-2020-11-20' of git://git.kernel.dk/linux-block:
s390/dasd: fix null pointer dereference for ERP requests
blk-cgroup: fix a hd_struct leak in blkcg_fill_root_iostats
nvme: fix memory leak freeing command effects
nvme: directly cache command effects log
nvme: free sq/cq dbbuf pointers when dbbuf set fails
block: mark flush request as IDLE when it is really finished
Linus Torvalds [Fri, 20 Nov 2020 19:47:22 +0000 (11:47 -0800)]
Merge tag 'io_uring-5.10-2020-11-20' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Mostly regression or stable fodder:
- Disallow async path resolution of /proc/self
- Tighten constraints for segmented async buffered reads
- Fix double completion for a retry error case
- Fix for fixed file life times (Pavel)"
* tag 'io_uring-5.10-2020-11-20' of git://git.kernel.dk/linux-block:
io_uring: order refnode recycling
io_uring: get an active ref_node from files_data
io_uring: don't double complete failed reissue request
mm: never attempt async page lock if we've transferred data already
io_uring: handle -EOPNOTSUPP on path resolution
proc: don't allow async path resolution of /proc/self components
Kees Cook [Tue, 17 Nov 2020 19:54:43 +0000 (11:54 -0800)]
selftests/seccomp: sh: Fix register names
It looks like the seccomp selftests was never actually built for sh.
This fixes it, though I don't have an environment to do a runtime test
of it yet.
Fixes:
0bb605c2c7f2b4b3 ("sh: Add SECCOMP_FILTER")
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/lkml/a36d7b48-6598-1642-e403-0c77a86f416d@physik.fu-berlin.de
Signed-off-by: Kees Cook <keescook@chromium.org>
Kees Cook [Tue, 17 Nov 2020 19:33:02 +0000 (11:33 -0800)]
selftests/seccomp: powerpc: Fix typo in macro variable name
A typo sneaked into the powerpc selftest. Fix the name so it builds again.
Fixes:
46138329faea ("selftests/seccomp: powerpc: Fix seccomp return value testing")
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/lkml/87y2ix2895.fsf@mpe.ellerman.id.au
Signed-off-by: Kees Cook <keescook@chromium.org>
Linus Torvalds [Fri, 20 Nov 2020 18:30:48 +0000 (10:30 -0800)]
Merge tag 'for-linus-5.10b-rc5-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A single fix for avoiding WARN splats when booting a Xen guest with
nosmt"
* tag 'for-linus-5.10b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: don't unbind uninitialized lock_kicker_irq
Linus Torvalds [Fri, 20 Nov 2020 18:23:49 +0000 (10:23 -0800)]
Merge tag 'dmaengine-fix-5.10-rc5' of git://git./linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"A solitary core fix and a few driver fixes:
Core:
- channel_register error handling
Driver fixes:
- idxd: wq config registers programming and mapping of portal size
- ioatdma: unused fn removal
- pl330: fix burst size
- ti: pm fix on busy and -Wenum-conversion warns
- xilinx: SG capability check, usage of xilinx_aximcdma_tx_segment,
readl_poll_timeout_atomic variant"
* tag 'dmaengine-fix-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: fix error codes in channel_register()
dmaengine: pl330: _prep_dma_memcpy: Fix wrong burst size
dmaengine: ioatdma: remove unused function missed during dma_v2 removal
dmaengine: idxd: fix mapping of portal size
dmaengine: ti: omap-dma: Block PM if SDMA is busy to fix audio
dmaengine: xilinx_dma: Fix SG capability check for MCDMA
dmaengine: xilinx_dma: Fix usage of xilinx_aximcdma_tx_segment
dmaengine: xilinx_dma: use readl_poll_timeout_atomic variant
dmaengine: ti: k3-udma: fix -Wenum-conversion warning
dmaengine: idxd: fix wq config registers offset programming
Linus Torvalds [Fri, 20 Nov 2020 18:20:16 +0000 (10:20 -0800)]
Merge tag 'iommu-fixes' of git://git./linux/kernel/git/arm64/linux
Pull iommu fixes from Will Deacon:
"Two straightforward vt-d fixes:
- Fix boot when intel iommu initialisation fails under TXT (tboot)
- Fix intel iommu compilation error when DMAR is enabled without ATS
and temporarily update IOMMU MAINTAINERs entry"
* tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
MAINTAINERS: Temporarily add myself to the IOMMU entry
iommu/vt-d: Fix compile error with CONFIG_PCI_ATS not set
iommu/vt-d: Avoid panic if iommu init fails in tboot system
Linus Torvalds [Fri, 20 Nov 2020 18:16:26 +0000 (10:16 -0800)]
Merge tag 'mmc-v5.10-rc4' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"A couple of MMC fixes:
- sdhci-of-arasan: Stabilize communication by fixing tap value configs
- sdhci-pci: Use SDR25 timing for HS mode for BYT-based Intel HWs"
* tag 'mmc-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-of-arasan: Issue DLL reset explicitly
mmc: sdhci-of-arasan: Use Mask writes for Tap delays
mmc: sdhci-of-arasan: Allow configuring zero tap values
mmc: sdhci-pci: Prefer SDR25 timing for High Speed mode for BYT-based Intel controllers
Linus Torvalds [Fri, 20 Nov 2020 17:56:16 +0000 (09:56 -0800)]
Merge tag 'sound-5.10-rc5' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes: the only core change is a minor error
code handling in the control API, and all the rest are device-specific
fixes, mostly quirks, fixups and ASoC Intel fixes.
It looks boring, and good so"
* tag 'sound-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: mixart: Fix mutex deadlock
ALSA: hda/ca0132: Fix compile warning without PCI
ASOC: Intel: kbl_rt5663_rt5514_max98927: Do not try to disable disabled clock
ALSA: usb-audio: Add delay quirk for all Logitech USB devices
ASoC: Intel: catpt: Correct clock selection for dai trigger
ASoC: Intel: catpt: Skip position update for unprepared streams
ASoC: qcom: lpass-platform: Fix memory leak
ASoC: Intel: KMB: Fix S24_LE configuration
ALSA: hda: Add Alderlake-S PCI ID and HDMI codec vid
ALSA: usb-audio: Use ALC1220-VB-DT mapping for ASUS ROG Strix TRX40 mobo
ALSA: firewire: Clean up a locking issue in copy_resp_to_buf()
ASoC: rt1015: increase the time to detect BCLK
ALSA: ctl: fix error path at adding user-defined element set
ALSA: hda/realtek - HP Headset Mic can't detect after boot
ALSA: hda/realtek - Add supported mute Led for HP
ALSA: hda/realtek: Add some Clove SSID in the ALC293(ALC1220)
ALSA: hda/realtek - Add supported for Lenovo ThinkPad Headset Button
ASoC: rt1015: add delay to fix pop noise from speaker
Linus Torvalds [Fri, 20 Nov 2020 17:49:25 +0000 (09:49 -0800)]
Merge tag 'drm-fixes-2020-11-20-2' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Weekly fixes pull.
This contains some fixes for sun4i/dw-hdmi probing, then amdgpu
enables arcturus hw without experimental flag and two other fixes and
a group of i915 fixes.
It also has a backported from next fix for the warn on reported in
ast/drm_gem_vram_helper code in the merge window. There's a separate
report which initially looked to be the same problem, but I'm going to
chase that up next week a bit more as I don't think the bisect landed
anywhere useful.
Summary:
core:
- vram helper TTM regression fix
amdgpu:
- Pageflip fix for navi1x with 5 or 6 displays
- Remove experimental flag for Arcturus
- Fix regression in atomic commit tail rework
i915:
- Fix tgl power gating issue
- Memory leak fixes
- Selftest fixes
- Display bpc fix
- Fix TGL MOCS for PTE tracking
dw-hdmi:
- probing fix
sun4i:
- probing fix"
* tag 'drm-fixes-2020-11-20-2' of git://anongit.freedesktop.org/drm/drm:
drm/i915/gt: Fixup tgl mocs for PTE tracking
drm/vram-helper: Fix use of top-down placement
drm/i915/gt: Remember to free the virtual breadcrumbs
drm/i915: Handle max_bpc==16
drm/amd/display: Always get CRTC updated constant values inside commit tail
drm/sun4i: backend: Fix probe failure with multiple backends
drm/sun4i: dw-hdmi: fix error return code in sun8i_dw_hdmi_bind()
drm/i915/selftests: Fix wrong return value of perf_request_latency()
drm/i915/selftests: Fix wrong return value of perf_series_engines()
drm/i915: Avoid memory leak with more than 16 workarounds on a list
drm/i915/tgl: Fix Media power gate sequence.
drm/amdgpu: remove experimental flag from arcturus
drm/amd/display: Add missing pflip irq for dcn2.0
drm/i915/gvt: return error when failing to take the module reference
drm: bridge: dw-hdmi: Avoid resetting force in the detect function
drm/i915/gvt: Set ENHANCED_FRAME_CAP bit
drm/i915/gvt: Temporarily disable vfio_edid for BXT/APL
Jan Kara [Wed, 18 Nov 2020 15:30:32 +0000 (16:30 +0100)]
ext4: fix bogus warning in ext4_update_dx_flag()
The idea of the warning in ext4_update_dx_flag() is that we should warn
when we are clearing EXT4_INODE_INDEX on a filesystem with metadata
checksums enabled since after clearing the flag, checksums for internal
htree nodes will become invalid. So there's no need to warn (or actually
do anything) when EXT4_INODE_INDEX is not set.
Link: https://lore.kernel.org/r/20201118153032.17281-1-jack@suse.cz
Fixes:
48a34311953d ("ext4: fix checksum errors with indexed dirs")
Reported-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Mauro Carvalho Chehab [Mon, 16 Nov 2020 10:18:08 +0000 (11:18 +0100)]
jbd2: fix kernel-doc markups
Kernel-doc markup should use this format:
identifier - description
They should not have any type before that, as otherwise
the parser won't do the right thing.
Also, some identifiers have different names between their
prototypes and the kernel-doc markup.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/72f5c6628f5f278d67625f60893ffbc2ca28d46e.1605521731.git.mchehab+huawei@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Dave Airlie [Fri, 20 Nov 2020 01:21:32 +0000 (11:21 +1000)]
Merge tag 'drm-intel-fixes-2020-11-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix tgl power gating issue (Rodrigo)
- Memory leak fixes (Tvrtko, Chris)
- Selftest fixes (Zhang)
- Display bpc fix (Ville)
- Fix TGL MOCS for PTE tracking (Chris)
GVT Fixes: It temporarily disables VFIO edid
feature on BXT/APL until its virtual display is really fixed to make
it work properly. And fixes for DPCD 1.2 and error return in taking
module reference.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201119203417.GA1795798@intel.com
Dave Airlie [Thu, 19 Nov 2020 20:18:01 +0000 (06:18 +1000)]
Merge tag 'drm-misc-fixes-2020-11-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
two patches to fix dw-hdmi bind and detection code, and one fix for
sun4i shared with arm-soc
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201119083939.ddj3saipyg5iwvb4@gilmour
Darrick J. Wong [Thu, 19 Nov 2020 23:17:50 +0000 (15:17 -0800)]
xfs: revert "xfs: fix rmap key and record comparison functions"
This reverts commit
6ff646b2ceb0eec916101877f38da0b73e3a5b7f.
Your maintainer committed a major braino in the rmap code by adding the
attr fork, bmbt, and unwritten extent usage bits into rmap record key
comparisons. While XFS uses the usage bits *in the rmap records* for
cross-referencing metadata in xfs_scrub and xfs_repair, it only needs
the owner and offset information to distinguish between reverse mappings
of the same physical extent into the data fork of a file at multiple
offsets. The other bits are not important for key comparisons for index
lookups, and never have been.
Eric Sandeen reports that this causes regressions in generic/299, so
undo this patch before it does more damage.
Reported-by: Eric Sandeen <sandeen@sandeen.net>
Fixes:
6ff646b2ceb0 ("xfs: fix rmap key and record comparison functions")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Linus Torvalds [Thu, 19 Nov 2020 21:33:16 +0000 (13:33 -0800)]
Merge tag 'net-5.10-rc5' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc5, including fixes from the WiFi
(mac80211), can and bpf (including the strncpy_from_user fix).
Current release - regressions:
- mac80211: fix memory leak of filtered powersave frames
- mac80211: free sta in sta_info_insert_finish() on errors to avoid
sleeping in atomic context
- netlabel: fix an uninitialized variable warning added in -rc4
Previous release - regressions:
- vsock: forward all packets to the host when no H2G is registered,
un-breaking AWS Nitro Enclaves
- net: Exempt multicast addresses from five-second neighbor lifetime
requirement, decreasing the chances neighbor tables fill up
- net/tls: fix corrupted data in recvmsg
- qed: fix ILT configuration of SRC block
- can: m_can: process interrupt only when not runtime suspended
Previous release - always broken:
- page_frag: Recover from memory pressure by not recycling pages
allocating from the reserves
- strncpy_from_user: Mask out bytes after NUL terminator
- ip_tunnels: Set tunnel option flag only when tunnel metadata is
present, always setting it confuses Open vSwitch
- bpf, sockmap:
- Fix partial copy_page_to_iter so progress can still be made
- Fix socket memory accounting and obeying SO_RCVBUF
- net: Have netpoll bring-up DSA management interface
- net: bridge: add missing counters to ndo_get_stats64 callback
- tcp: brr: only postpone PROBE_RTT if RTT is < current min_rtt
- enetc: Workaround MDIO register access HW bug
- net/ncsi: move netlink family registration to a subsystem init,
instead of tying it to driver probe
- net: ftgmac100: unregister NC-SI when removing driver to avoid
crash
- lan743x:
- prevent interrupt storm on open
- fix freeing skbs in the wrong context
- net/mlx5e: Fix socket refcount leak on kTLS RX resync
- net: dsa: mv88e6xxx: Avoid VLAN database corruption on 6097
- fix 21 unset return codes and other mistakes on error paths, mostly
detected by the Hulk Robot"
* tag 'net-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (115 commits)
fail_function: Remove a redundant mutex unlock
selftest/bpf: Test bpf_probe_read_user_str() strips trailing bytes after NUL
lib/strncpy_from_user.c: Mask out bytes after NUL terminator.
net/smc: fix direct access to ib_gid_addr->ndev in smc_ib_determine_gid()
net/smc: fix matching of existing link groups
ipv6: Remove dependency of ipv6_frag_thdr_truncated on ipv6 module
libbpf: Fix VERSIONED_SYM_COUNT number parsing
net/mlx4_core: Fix init_hca fields offset
atm: nicstar: Unmap DMA on send error
page_frag: Recover from memory pressure
net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset
mlxsw: core: Use variable timeout for EMAD retries
mlxsw: Fix firmware flashing
net: Have netpoll bring-up DSA management interface
atl1e: fix error return code in atl1e_probe()
atl1c: fix error return code in atl1c_probe()
ah6: fix error return code in ah6_input()
net: usb: qmi_wwan: Set DTR quirk for MR400
can: m_can: process interrupt only when not runtime suspended
can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery
...
Linus Torvalds [Thu, 19 Nov 2020 21:01:53 +0000 (13:01 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"The last two weeks have been quiet here, just the usual smattering of
long standing bug fixes.
A collection of error case bug fixes:
- Improper nesting of spinlock types in cm
- Missing error codes and kfree()
- Ensure dma_virt_ops users have the right kconfig symbols to work
properly
- Compilation failure of tools/testing"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
tools/testing/scatterlist: Fix test to compile and run
IB/hfi1: Fix error return code in hfi1_init_dd()
RMDA/sw: Don't allow drivers using dma_virt_ops on highmem configs
RDMA/pvrdma: Fix missing kfree() in pvrdma_register_device()
RDMA/cm: Make the local_id_table xarray non-irq
Theodore Ts'o [Thu, 19 Nov 2020 20:36:25 +0000 (15:36 -0500)]
ext4: drop fast_commit from /proc/mounts
The options in /proc/mounts must be valid mount options --- and
fast_commit is not a mount option. Otherwise, command sequences like
this will fail:
# mount /dev/vdc /vdc
# mkdir -p /vdc/phoronix_test_suite /pts
# mount --bind /vdc/phoronix_test_suite /pts
# mount -o remount,nodioread_nolock /pts
mount: /pts: mount point not mounted or bad option.
And in the system logs, you'll find:
EXT4-fs (vdc): Unrecognized mount option "fast_commit" or missing value
Fixes:
995a3ed67fc8 ("ext4: add fast_commit feature and handling for extended mount options")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jakub Kicinski [Thu, 19 Nov 2020 20:26:09 +0000 (12:26 -0800)]
Merge https://git./linux/kernel/git/bpf/bpf
Alexei Starovoitov says:
====================
1) libbpf should not attempt to load unused subprogs, from Andrii.
2) Make strncpy_from_user() mask out bytes after NUL terminator, from Daniel.
3) Relax return code check for subprograms in the BPF verifier, from Dmitrii.
4) Fix several sockmap issues, from John.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
fail_function: Remove a redundant mutex unlock
selftest/bpf: Test bpf_probe_read_user_str() strips trailing bytes after NUL
lib/strncpy_from_user.c: Mask out bytes after NUL terminator.
libbpf: Fix VERSIONED_SYM_COUNT number parsing
bpf, sockmap: Avoid failures from skb_to_sgvec when skb has frag_list
bpf, sockmap: Handle memory acct if skb_verdict prog redirects to self
bpf, sockmap: Avoid returning unneeded EAGAIN when redirecting to self
bpf, sockmap: Use truesize with sk_rmem_schedule()
bpf, sockmap: Ensure SO_RCVBUF memory is observed on ingress redirect
bpf, sockmap: Fix partial copy_page_to_iter so progress can still be made
selftests/bpf: Fix error return code in run_getsockopt_test()
bpf: Relax return code check for subprograms
tools, bpftool: Add missing close before bpftool net attach exit
MAINTAINERS/bpf: Update Andrii's entry.
selftests/bpf: Fix unused attribute usage in subprogs_unused test
bpf: Fix unsigned 'datasec_id' compared with zero in check_pseudo_btf_id
bpf: Fix passing zero to PTR_ERR() in bpf_btf_printf_prepare
libbpf: Don't attempt to load unused subprog as an entry-point BPF program
====================
Link: https://lore.kernel.org/r/20201119200721.288-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Chris Wilson [Thu, 15 Oct 2020 12:21:38 +0000 (13:21 +0100)]
drm/i915/gt: Fixup tgl mocs for PTE tracking
Forcing mocs:1 [used for our winsys follows-pte mode] to be cached
caused display glitches. Though it is documented as deprecated (and so
likely behaves as uncached) use the follow-pte bit and force it out of
L3 cache.
Testcase: igt/kms_frontbuffer_tracking
Testcase: igt/kms_big_fb
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201015122138.30161-4-chris@chris-wilson.co.uk
(cherry picked from commit
a04ac827366594c7244f60e9be79fcb404af69f0)
Fixes:
849c0fe9e831 ("drm/i915/gt: Initialize reserved and unspecified MOCS indices")
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo: Updated Fixes tag]
Dave Airlie [Thu, 19 Nov 2020 20:08:35 +0000 (06:08 +1000)]
Merge tag 'amd-drm-fixes-5.10-2020-11-18' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.10-2020-11-18:
amdgpu:
- Pageflip fix for navi1x with 5 or 6 displays
- Remove experimental flag for Arcturus
- Fix regression in atomic commit tail rework
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201118213646.4015-1-alexander.deucher@amd.com
Luo Meng [Wed, 18 Nov 2020 13:49:31 +0000 (22:49 +0900)]
fail_function: Remove a redundant mutex unlock
Fix a mutex_unlock() issue where before copy_from_user() is
not called mutex_locked.
Fixes:
4b1a29a7f542 ("error-injection: Support fault injection framework")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/bpf/160570737118.263807.8358435412898356284.stgit@devnote2
Alexei Starovoitov [Thu, 19 Nov 2020 18:45:55 +0000 (10:45 -0800)]
Merge branch 'Fix bpf_probe_read_user_str() overcopying'
Daniel Xu says:
====================
6ae08ae3dea2 ("bpf: Add probe_read_{user, kernel} and probe_read_{user,
kernel}_str helpers") introduced a subtle bug where
bpf_probe_read_user_str() would potentially copy a few extra bytes after
the NUL terminator.
This issue is particularly nefarious when strings are used as map keys,
as seemingly identical strings can occupy multiple entries in a map.
This patchset fixes the issue and introduces a selftest to prevent
future regressions.
v6 -> v7:
* Add comments
v5 -> v6:
* zero-pad up to sizeof(unsigned long) after NUL
v4 -> v5:
* don't read potentially uninitialized memory
v3 -> v4:
* directly pass userspace pointer to prog
* test more strings of different length
v2 -> v3:
* set pid filter before attaching prog in selftest
* use long instead of int as bpf_probe_read_user_str() retval
* style changes
v1 -> v2:
* add Fixes: tag
* add selftest
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Xu [Tue, 17 Nov 2020 20:05:46 +0000 (12:05 -0800)]
selftest/bpf: Test bpf_probe_read_user_str() strips trailing bytes after NUL
Previously, bpf_probe_read_user_str() could potentially overcopy the
trailing bytes after the NUL due to how do_strncpy_from_user() does the
copy in long-sized strides. The issue has been fixed in the previous
commit.
This commit adds a selftest that ensures we don't regress
bpf_probe_read_user_str() again.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/4d977508fab4ec5b7b574b85bdf8b398868b6ee9.1605642949.git.dxu@dxuuu.xyz
Daniel Xu [Tue, 17 Nov 2020 20:05:45 +0000 (12:05 -0800)]
lib/strncpy_from_user.c: Mask out bytes after NUL terminator.
do_strncpy_from_user() may copy some extra bytes after the NUL
terminator into the destination buffer. This usually does not matter for
normal string operations. However, when BPF programs key BPF maps with
strings, this matters a lot.
A BPF program may read strings from user memory by calling the
bpf_probe_read_user_str() helper which eventually calls
do_strncpy_from_user(). The program can then key a map with the
destination buffer. BPF map keys are fixed-width and string-agnostic,
meaning that map keys are treated as a set of bytes.
The issue is when do_strncpy_from_user() overcopies bytes after the NUL
terminator, it can result in seemingly identical strings occupying
multiple slots in a BPF map. This behavior is subtle and totally
unexpected by the user.
This commit masks out the bytes following the NUL while preserving
long-sized stride in the fast path.
Fixes:
6ae08ae3dea2 ("bpf: Add probe_read_{user, kernel} and probe_read_{user, kernel}_str helpers")
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/21efc982b3e9f2f7b0379eed642294caaa0c27a7.1605642949.git.dxu@dxuuu.xyz
Linus Torvalds [Thu, 19 Nov 2020 19:32:31 +0000 (11:32 -0800)]
Merge tag 'powerpc-cve-2020-4788' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fixes for CVE-2020-4788.
From Daniel's cover letter:
IBM Power9 processors can speculatively operate on data in the L1
cache before it has been completely validated, via a way-prediction
mechanism. It is not possible for an attacker to determine the
contents of impermissible memory using this method, since these
systems implement a combination of hardware and software security
measures to prevent scenarios where protected data could be leaked.
However these measures don't address the scenario where an attacker
induces the operating system to speculatively execute instructions
using data that the attacker controls. This can be used for example to
speculatively bypass "kernel user access prevention" techniques, as
discovered by Anthony Steinhauser of Google's Safeside Project. This
is not an attack by itself, but there is a possibility it could be
used in conjunction with side-channels or other weaknesses in the
privileged code to construct an attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern.
This patch series flushes the L1 cache on kernel entry (patch 2) and
after the kernel performs any user accesses (patch 3). It also adds a
self-test and performs some related cleanups"
* tag 'powerpc-cve-2020-4788' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: rename pnv|pseries_setup_rfi_flush to _setup_security_mitigations
selftests/powerpc: refactor entry and rfi_flush tests
selftests/powerpc: entry flush test
powerpc: Only include kup-radix.h for 64-bit Book3S
powerpc/64s: flush L1D after user accesses
powerpc/64s: flush L1D on kernel entry
selftests/powerpc: rfi_flush: disable entry flush if present
Linus Torvalds [Thu, 19 Nov 2020 19:22:33 +0000 (11:22 -0800)]
Merge tag 'xtensa-
20201119' of git://github.com/jcmvbkbc/linux-xtensa
Pull xtensa fixes from Max Filippov:
- fix placement of cache alias remapping area
- disable preemption around cache alias management calls
- add missing __user annotation to strncpy_from_user argument
* tag 'xtensa-
20201119' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: uaccess: Add missing __user to strncpy_from_user() prototype
xtensa: disable preemption around cache alias management calls
xtensa: fix TLBTEMP area placement
Thomas Zimmermann [Mon, 21 Sep 2020 14:25:36 +0000 (16:25 +0200)]
drm/vram-helper: Fix use of top-down placement
Commit
7053e0eab473 ("drm/vram-helper: stop using TTM placement flags")
cleared the BO placement flags if top-down placement had been selected.
Hence, BOs that were supposed to go into VRAM are now placed in a default
location in system memory.
Trying to scanout the incorrectly pinned BO results in displayed garbage
and an error message.
[ 146.108127] ------------[ cut here ]------------
[ 146.1V08180] WARNING: CPU: 0 PID: 152 at drivers/gpu/drm/drm_gem_vram_helper.c:284 drm_gem_vram_offset+0x59/0x60 [drm_vram_helper]
...
[ 146.108591] ast_cursor_page_flip+0x3e/0x150 [ast]
[ 146.108622] ast_cursor_plane_helper_atomic_update+0x8a/0xc0 [ast]
[ 146.108654] drm_atomic_helper_commit_planes+0x197/0x4c0
[ 146.108699] drm_atomic_helper_commit_tail_rpm+0x59/0xa0
[ 146.108718] commit_tail+0x103/0x1c0
...
[ 146.109302] ---[ end trace
d901a1ba1d949036 ]---
Fix the bug by keeping the placement flags. The top-down placement flag
is stored in a separate variable.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes:
7053e0eab473 ("drm/vram-helper: stop using TTM placement flags")
Reported-by: Pu Wen <puwen@hygon.cn> [for 5.10-rc1]
Tested-by: Pu Wen <puwen@hygon.cn>
Cc: Christian König <christian.koenig@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200921142536.4392-1-tzimmermann@suse.de
(cherry picked from commit
b8f8dbf6495850b0babc551377bde754b7bc0eea)
[pulled into fixes from drm-next]
Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Thu, 19 Nov 2020 19:15:15 +0000 (11:15 -0800)]
Merge tag 'acpi-5.10-rc5' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix recent regression in the APEI code and initialization issue
in the ACPI fan driver.
Specifics:
- Make the APEI code avoid attempts to obtain logical addresses for
registers located in the I/O address space to fix initialization
issues (Aili Yao)
- Fix sysfs attribute initialization in the ACPI fan driver (Guenter
Roeck)"
* tag 'acpi-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI, APEI, Fix error return value in apei_map_generic_address()
ACPI: fan: Initialize performance state sysfs attribute
Linus Torvalds [Thu, 19 Nov 2020 19:11:50 +0000 (11:11 -0800)]
Merge tag 'pm-5.10-rc5' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two issues in ARM cpufreq drivers and one cpuidle driver
issue.
Specifics:
- Add missing RCU_NONIDLE() annotations to the Tegra cpuidle driver
(Dmitry Osipenko)
- Fix boot frequency computation in the tegra186 cpufreq driver (Jon
Hunter)
- Make the SCMI cpufreq driver register a dummy clock provider to
avoid OPP addition failures (Sudeep Holla)"
* tag 'pm-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: scmi: Fix OPP addition failure with a dummy clock provider
cpufreq: tegra186: Fix get frequency callback
cpuidle: tegra: Annotate tegra_pm_set_cpu_in_lp2() with RCU_NONIDLE
Linus Torvalds [Thu, 19 Nov 2020 19:05:28 +0000 (11:05 -0800)]
Merge tag 'spi-fix-v5.10-rc4' of git://git./linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"This is a relatively large set of fixes, the bulk of it being a series
from Lukas Wunner which fixes confusion with the lifetime of driver
data allocated along with the SPI controller structure that's been
created as part of the conversion to devm APIs.
The simplest fix, explained in detail in Lukas' commit message, is to
move to a devm_ function for allocation of the controller and hence
driver data in order to push the free of that after anything tries to
reference the driver data in the remove path. This results in a
relatively large diff due to the addition of a new function but isn't
particularly complex.
There's also a fix from Sven van Asbroeck which fixes yet more fallout
from the conflicts between the various different places one can
configure the polarity of GPIOs in modern systems.
Otherwise everything is fairly small and driver specific"
* tag 'spi-fix-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: npcm-fiu: Don't leak SPI master in probe error path
spi: dw: Set transfer handler before unmasking the IRQs
spi: cadence-quadspi: Fix error return code in cqspi_probe
spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe
spi: lpspi: Fix use-after-free on unbind
spi: bcm-qspi: Fix use-after-free on unbind
spi: bcm2835aux: Fix use-after-free on unbind
spi: bcm2835: Fix use-after-free on unbind
spi: Introduce device-managed SPI controller allocation
spi: fsi: Fix transfer returning without finalizing message
spi: fix client driver breakages when using GPIO descriptors
Jakub Kicinski [Thu, 19 Nov 2020 18:59:22 +0000 (10:59 -0800)]
Merge branch 'net-smc-fixes-2020-11-18'
Karsten Graul says:
====================
net/smc: fixes 2020-11-18
Patch 1 fixes the matching of link groups because with SMC-Dv2 the vlanid
should no longer be part of this matching. Patch 2 removes a sparse message.
====================
Link: https://lore.kernel.org/r/20201118214038.24039-1-kgraul@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Karsten Graul [Wed, 18 Nov 2020 21:40:38 +0000 (22:40 +0100)]
net/smc: fix direct access to ib_gid_addr->ndev in smc_ib_determine_gid()
Sparse complaints 3 times about:
net/smc/smc_ib.c:203:52: warning: incorrect type in argument 1 (different address spaces)
net/smc/smc_ib.c:203:52: expected struct net_device const *dev
net/smc/smc_ib.c:203:52: got struct net_device [noderef] __rcu *const ndev
Fix that by using the existing and validated ndev variable instead of
accessing attr->ndev directly.
Fixes:
5102eca9039b ("net/smc: Use rdma_read_gid_l2_fields to L2 fields")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Karsten Graul [Wed, 18 Nov 2020 21:40:37 +0000 (22:40 +0100)]
net/smc: fix matching of existing link groups
With the multi-subnet support of SMC-Dv2 the match for existing link
groups should not include the vlanid of the network device.
Set ini->smcd_version accordingly before the call to smc_conn_create()
and use this value in smc_conn_create() to skip the vlanid check.
Fixes:
5c21c4ccafe8 ("net/smc: determine accepted ISM devices")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Takashi Iwai [Thu, 19 Nov 2020 18:56:29 +0000 (19:56 +0100)]
Merge tag 'asoc-fix-v5.10-rc4' of https://git./linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.11
A collection of driver specific fixes, mostly for x86 systems (or CODECs
used mostly on x86) and all for relatively minor issues, the biggest one
being fixing S24_LE format on Keem Bay systems.
Linus Torvalds [Thu, 19 Nov 2020 18:55:54 +0000 (10:55 -0800)]
Merge tag 'regulator-fix-v5.10-rc4' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Mostly core fixes here, one set from Michał Mirosław which cleans up
some issues introduced as part of the coupled regulators work, one
memory leak during probe and two due to regulators which have an input
supply name and regulator name which are identical, which is very
unusual.
There's also a fix for our handling of the similarly unusual case
where we can't determine if a regulator is enabled during boot"
* tag 'regulator-fix-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: ti-abb: Fix array out of bound read access on the first transition
regulator: workaround self-referent regulators
regulator: avoid resolve_supply() infinite recursion
regulator: fix memory leak with repeated set_machine_constraints()
regulator: pfuze100: limit pfuze-support-disable-sw to pfuze{100,200}
regulator: core: don't disable regulator if is_enabled return error.
Georg Kohmann [Thu, 19 Nov 2020 09:58:33 +0000 (10:58 +0100)]
ipv6: Remove dependency of ipv6_frag_thdr_truncated on ipv6 module
IPV6=m
NF_DEFRAG_IPV6=y
ld: net/ipv6/netfilter/nf_conntrack_reasm.o: in function
`nf_ct_frag6_gather':
net/ipv6/netfilter/nf_conntrack_reasm.c:462: undefined reference to
`ipv6_frag_thdr_truncated'
Netfilter is depending on ipv6 symbol ipv6_frag_thdr_truncated. This
dependency is forcing IPV6=y.
Remove this dependency by moving ipv6_frag_thdr_truncated out of ipv6. This
is the same solution as used with a similar issues: Referring to
commit
70b095c843266 ("ipv6: remove dependency of nf_defrag_ipv6 on ipv6
module")
Fixes:
9d9e937b1c8b ("ipv6/netfilter: Discard first fragment not including all headers")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Georg Kohmann <geokohma@cisco.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20201119095833.8409-1-geokohma@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 19 Nov 2020 18:49:35 +0000 (10:49 -0800)]
Merge tag 'thermal-v5.10-rc5' of git://git./linux/kernel/git/thermal/linux
Pull thermal fix from Daniel Lezcano:
"Disable the CPU PM notifier for OMAP4430 for suspend in order to
prevent wrong temperature leading to a critical shutdown (Peter
Ujfalusi)"
* tag 'thermal-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal: ti-soc-thermal: Disable the CPU PM notifier for OMAP4430
Takashi Iwai [Thu, 19 Nov 2020 12:14:40 +0000 (13:14 +0100)]
ALSA: mixart: Fix mutex deadlock
The code change for switching to non-atomic mode brought the
unexpected mutex deadlock in get_msg(). It converted the spinlock
with the existing mutex, but there were calls with the already holding
the mutex. Since the only place that needs the extra lock is the code
path from snd_mixart_send_msg(), remove the mutex lock in get_msg()
and apply in the caller side for fixing the mutex deadlock.
Fixes:
8d3a8b5cb57d ("ALSA: mixart: Use nonatomic PCM ops")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201119121440.18945-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dave Chinner [Thu, 19 Nov 2020 16:59:11 +0000 (08:59 -0800)]
xfs: don't allow NOWAIT DIO across extent boundaries
Jens has reported a situation where partial direct IOs can be issued
and completed yet still return -EAGAIN. We don't want this to report
a short IO as we want XFS to complete user DIO entirely or not at
all.
This partial IO situation can occur on a write IO that is split
across an allocated extent and a hole, and the second mapping is
returning EAGAIN because allocation would be required.
The trivial reproducer:
$ sudo xfs_io -fdt -c "pwrite 0 4k" -c "pwrite -V 1 -b 8k -N 0 8k" /mnt/scr/foo
wrote 4096/4096 bytes at offset 0
4 KiB, 1 ops; 0.0001 sec (27.509 MiB/sec and 7042.2535 ops/sec)
pwrite: Resource temporarily unavailable
$
The pwritev2(0, 8kB, RWF_NOWAIT) call returns EAGAIN having done
the first 4kB write:
xfs_file_direct_write: dev 259:1 ino 0x83 size 0x1000 offset 0x0 count 0x2000
iomap_apply: dev 259:1 ino 0x83 pos 0 length 8192 flags WRITE|DIRECT|NOWAIT (0x31) ops xfs_direct_write_iomap_ops caller iomap_dio_rw actor iomap_dio_actor
xfs_ilock_nowait: dev 259:1 ino 0x83 flags ILOCK_SHARED caller xfs_ilock_for_iomap
xfs_iunlock: dev 259:1 ino 0x83 flags ILOCK_SHARED caller xfs_direct_write_iomap_begin
xfs_iomap_found: dev 259:1 ino 0x83 size 0x1000 offset 0x0 count 8192 fork data startoff 0x0 startblock 24 blockcount 0x1
iomap_apply_dstmap: dev 259:1 ino 0x83 bdev 259:1 addr 102400 offset 0 length 4096 type MAPPED flags DIRTY
Here the first iomap loop has mapped the first 4kB of the file and
issued the IO, and we enter the second iomap_apply loop:
iomap_apply: dev 259:1 ino 0x83 pos 4096 length 4096 flags WRITE|DIRECT|NOWAIT (0x31) ops xfs_direct_write_iomap_ops caller iomap_dio_rw actor iomap_dio_actor
xfs_ilock_nowait: dev 259:1 ino 0x83 flags ILOCK_SHARED caller xfs_ilock_for_iomap
xfs_iunlock: dev 259:1 ino 0x83 flags ILOCK_SHARED caller xfs_direct_write_iomap_begin
And we exit with -EAGAIN out because we hit the allocate case trying
to make the second 4kB block.
Then IO completes on the first 4kB and the original IO context
completes and unlocks the inode, returning -EAGAIN to userspace:
xfs_end_io_direct_write: dev 259:1 ino 0x83 isize 0x1000 disize 0x1000 offset 0x0 count 4096
xfs_iunlock: dev 259:1 ino 0x83 flags IOLOCK_SHARED caller xfs_file_dio_aio_write
There are other vectors to the same problem when we re-enter the
mapping code if we have to make multiple mappinfs under NOWAIT
conditions. e.g. failing trylocks, COW extents being found,
allocation being required, and so on.
Avoid all these potential problems by only allowing IOMAP_NOWAIT IO
to go ahead if the mapping we retrieve for the IO spans an entire
allocated extent. This avoids the possibility of subsequent mappings
to complete the IO from triggering NOWAIT semantics by any means as
NOWAIT IO will now only enter the mapping code once per NOWAIT IO.
Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Jiri Olsa [Wed, 18 Nov 2020 21:13:50 +0000 (22:13 +0100)]
libbpf: Fix VERSIONED_SYM_COUNT number parsing
We remove "other info" from "readelf -s --wide" output when
parsing GLOBAL_SYM_COUNT variable, which was added in [1].
But we don't do that for VERSIONED_SYM_COUNT and it's failing
the check_abi target on powerpc Fedora 33.
The extra "other info" wasn't problem for VERSIONED_SYM_COUNT
parsing until commit [2] added awk in the pipe, which assumes
that the last column is symbol, but it can be "other info".
Adding "other info" removal for VERSIONED_SYM_COUNT the same
way as we did for GLOBAL_SYM_COUNT parsing.
[1]
aa915931ac3e ("libbpf: Fix readelf output parsing for Fedora")
[2]
746f534a4809 ("tools/libbpf: Avoid counting local symbols in ABI check")
Fixes:
746f534a4809 ("tools/libbpf: Avoid counting local symbols in ABI check")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201118211350.1493421-1-jolsa@kernel.org
Jens Axboe [Thu, 19 Nov 2020 16:23:27 +0000 (09:23 -0700)]
Merge tag 'nvme-5.10-2020-11-19' of git://git.infradead.org/nvme into block-5.10
Pull NVMe fixes from Christoph:
"nvme fixes for 5.10
- Doorbell Buffer freeing fix (Minwoo Im)
- CSE log leak fix (Keith Busch)"
* tag 'nvme-5.10-2020-11-19' of git://git.infradead.org/nvme:
nvme: fix memory leak freeing command effects
nvme: directly cache command effects log
nvme: free sq/cq dbbuf pointers when dbbuf set fails
Rafael J. Wysocki [Thu, 19 Nov 2020 13:03:52 +0000 (14:03 +0100)]
Merge branch 'acpi-fan'
* acpi-fan:
ACPI: fan: Initialize performance state sysfs attribute
Rafael J. Wysocki [Thu, 19 Nov 2020 13:02:18 +0000 (14:02 +0100)]
Merge branch 'pm-cpuidle'
* pm-cpuidle:
cpuidle: tegra: Annotate tegra_pm_set_cpu_in_lp2() with RCU_NONIDLE
Daniel Axtens [Tue, 17 Nov 2020 05:59:16 +0000 (16:59 +1100)]
powerpc/64s: rename pnv|pseries_setup_rfi_flush to _setup_security_mitigations
pseries|pnv_setup_rfi_flush already does the count cache flush setup, and
we just added entry and uaccess flushes. So the name is not very accurate
any more. In both platforms we then also immediately setup the STF flush.
Rename them to _setup_security_mitigations and fold the STF flush in.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Daniel Axtens [Tue, 17 Nov 2020 05:59:15 +0000 (16:59 +1100)]
selftests/powerpc: refactor entry and rfi_flush tests
For simplicity in backporting, the original entry_flush test contained
a lot of duplicated code from the rfi_flush test. De-duplicate that code.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Daniel Axtens [Tue, 17 Nov 2020 05:59:14 +0000 (16:59 +1100)]
selftests/powerpc: entry flush test
Add a test modelled on the RFI flush test which counts the number
of L1D misses doing a simple syscall with the entry flush on and off.
For simplicity of backporting, this test duplicates a lot of code from
rfi_flush. We clean that up in the next patch.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Thu, 19 Nov 2020 12:43:53 +0000 (23:43 +1100)]
powerpc: Only include kup-radix.h for 64-bit Book3S
In kup.h we currently include kup-radix.h for all 64-bit builds, which
includes Book3S and Book3E. The latter doesn't make sense, Book3E
never uses the Radix MMU.
This has worked up until now, but almost by accident, and the recent
uaccess flush changes introduced a build breakage on Book3E because of
the bad structure of the code.
So disentangle things so that we only use kup-radix.h for Book3S. This
requires some more stubs in kup.h and fixing an include in
syscall_64.c.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Tue, 17 Nov 2020 05:59:13 +0000 (16:59 +1100)]
powerpc/64s: flush L1D after user accesses
IBM Power9 processors can speculatively operate on data in the L1 cache
before it has been completely validated, via a way-prediction mechanism. It
is not possible for an attacker to determine the contents of impermissible
memory using this method, since these systems implement a combination of
hardware and software security measures to prevent scenarios where
protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that
the attacker controls. This can be used for example to speculatively bypass
"kernel user access prevention" techniques, as discovered by Anthony
Steinhauser of Google's Safeside Project. This is not an attack by itself,
but there is a possibility it could be used in conjunction with
side-channels or other weaknesses in the privileged code to construct an
attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern. This patch flushes the L1 cache after user accesses.
This is part of the fix for CVE-2020-4788.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Tue, 17 Nov 2020 05:59:12 +0000 (16:59 +1100)]
powerpc/64s: flush L1D on kernel entry
IBM Power9 processors can speculatively operate on data in the L1 cache
before it has been completely validated, via a way-prediction mechanism. It
is not possible for an attacker to determine the contents of impermissible
memory using this method, since these systems implement a combination of
hardware and software security measures to prevent scenarios where
protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that
the attacker controls. This can be used for example to speculatively bypass
"kernel user access prevention" techniques, as discovered by Anthony
Steinhauser of Google's Safeside Project. This is not an attack by itself,
but there is a possibility it could be used in conjunction with
side-channels or other weaknesses in the privileged code to construct an
attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern. This patch flushes the L1 cache on kernel entry.
This is part of the fix for CVE-2020-4788.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Russell Currey [Tue, 17 Nov 2020 05:59:11 +0000 (16:59 +1100)]
selftests/powerpc: rfi_flush: disable entry flush if present
We are about to add an entry flush. The rfi (exit) flush test measures
the number of L1D flushes over a syscall with the RFI flush enabled and
disabled. But if the entry flush is also enabled, the effect of enabling
and disabling the RFI flush is masked.
If there is a debugfs entry for the entry flush, disable it during the RFI
flush and restore it later.
Reported-by: Spoorthy S <spoorts2@in.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Takashi Iwai [Thu, 19 Nov 2020 12:04:04 +0000 (13:04 +0100)]
ALSA: hda/ca0132: Fix compile warning without PCI
CONFIG_PCI=n leads to a compile warning like:
sound/pci/hda/patch_ca0132.c:8214:10: warning: no case matching constant switch condition '0'
due to the missed handling of QUIRK_NONE in ca0132_mmio_init().
Fix it.
Fixes:
bf2aa9ccc8e5 ("ALSA: hda/ca0132 - Cleanup ca0132_mmio_init function.")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20201119120404.16833-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Will Deacon [Thu, 19 Nov 2020 11:12:17 +0000 (11:12 +0000)]
MAINTAINERS: Temporarily add myself to the IOMMU entry
Joerg is recovering from an injury, so temporarily add myself to the
IOMMU MAINTAINERS entry so that I'm more likely to get CC'd on patches
while I help to look after the tree for him.
Suggested-by: Joerg Roedel <joro@8bytes.org>
Link: https://lore.kernel.org/r/20201117100953.GR22888@8bytes.org
Signed-off-by: Will Deacon <will@kernel.org>
Lu Baolu [Thu, 19 Nov 2020 05:51:19 +0000 (13:51 +0800)]
iommu/vt-d: Fix compile error with CONFIG_PCI_ATS not set
Fix the compile error below (CONFIG_PCI_ATS not set):
drivers/iommu/intel/dmar.c: In function ‘vf_inherit_msi_domain’:
drivers/iommu/intel/dmar.c:338:59: error: ‘struct pci_dev’ has no member named ‘physfn’; did you mean ‘is_physfn’?
338 | dev_set_msi_domain(&pdev->dev, dev_get_msi_domain(&pdev->physfn->dev));
| ^~~~~~
| is_physfn
Fixes:
ff828729be44 ("iommu/vt-d: Cure VF irqdomain hickup")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/linux-iommu/CAMuHMdXA7wfJovmfSH2nbAhN0cPyCiFHodTvg4a8Hm9rx5Dj-w@mail.gmail.com/
Link: https://lore.kernel.org/r/20201119055119.2862701-1-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Will Deacon [Thu, 19 Nov 2020 09:46:58 +0000 (09:46 +0000)]
Merge tag 'x86-urgent-2020-11-15' of git://git./linux/kernel/git/tip/tip into for-next/iommu/fixes
Pull in x86 fixes from Thomas, as they include a change to the Intel DMAR
code on which we depend:
* tag 'x86-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
iommu/vt-d: Cure VF irqdomain hickup
x86/platform/uv: Fix copied UV5 output archtype
x86/platform/uv: Drop last traces of uv_flush_tlb_others
Maxime Ripard [Thu, 19 Nov 2020 08:26:06 +0000 (09:26 +0100)]
Merge tag 'drm/sun4i-dma-fix-pull-request' of ssh://gitolite./linux/kernel/git/mripard/linux into drm-misc-fixes
Fix for drm/sun4i shared with arm-soc
This patch is a preliminary fix that will conflict with subsequent work merged
through arm-soc.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
# gpg: Signature made Wed 18 Nov 2020 09:51:53 AM CET
# gpg: using EDDSA key
5C1337A45ECA9AEB89060E9EE3EF0D6F671851C5
# gpg: Good signature from "Maxime Ripard <maxime.ripard@anandra.org>" [unknown]
# gpg: aka "Maxime Ripard <mripard@kernel.org>" [unknown]
# gpg: aka "Maxime Ripard (Work Address) <maxime.ripard@bootlin.com>" [unknown]
# gpg: aka "Maxime Ripard (Work Address) <maxime@bootlin.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: BE56 75C3 7E81 8C8B 5764 241C 254B CFC5 6BF6 CE8D
# Subkey fingerprint: 5C13 37A4 5ECA 9AEB 8906 0E9E E3EF 0D6F 6718 51C5
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201118090455.sznrgpduuytlc22k@gilmour.lan
Rodrigo Vivi [Thu, 19 Nov 2020 06:52:50 +0000 (01:52 -0500)]
Merge tag 'gvt-fixes-2020-11-17' of https://github.com/intel/gvt-linux into drm-intel-fixes
gvt-fixes-2020-11-17
- Temporarily disable VFIO edid on BXT/APL (Colin)
- Fix emulated DPCD for version 1.2 (Tina)
- Fix error return when failing to take module reference (Xiongfeng)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117023918.GB23899@zhen-hp.sh.intel.com
Chris Wilson [Wed, 18 Nov 2020 13:38:39 +0000 (13:38 +0000)]
drm/i915/gt: Remember to free the virtual breadcrumbs
Since we allocate some breadcrumbs for the virtual engine, and the
virtual engine has a custom destructor, we also need to free the
breadcrumbs after use.
Fixes:
b3786b29379c ("drm/i915/gt: Distinguish the virtual breadcrumbs from the irq breadcrumbs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201118133839.1783-1-chris@chris-wilson.co.uk
(cherry picked from commit
45e50f48b7907e650cfbbc7879abfe3a0c419c73)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Ville Syrjälä [Tue, 10 Nov 2020 21:04:47 +0000 (23:04 +0200)]
drm/i915: Handle max_bpc==16
EDID can declare the maximum supported bpc up to 16,
and apparently there are displays that do so. Currently
we assume 12 bpc is tha max. Fix the assumption and
toss in a MISSING_CASE() for any other value we don't
expect to see.
This fixes modesets with a display with EDID max bpc > 12.
Previously any modeset would just silently fail on platforms
that didn't otherwise limit this via the max_bpc property.
In particular we don't add the max_bpc property to HDMI
ports on gmch platforms, and thus we would see the raw
max_bpc coming from the EDID.
I suppose we could already adjust this to also allow 16bpc,
but seeing as no current platform supports that there is
little point.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2632
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110210447.27454-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit
2ca5a7b85b0c2b97ef08afbd7799b022e29f192e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Jakub Kicinski [Thu, 19 Nov 2020 01:49:24 +0000 (17:49 -0800)]
Merge tag 'linux-can-fixes-for-5.10-
20201118' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2020-11-18
Jimmy Assarsson provides two patches for the kvaser_pciefd and kvaser_usb
drivers, where the can_bittiming_const are fixed.
The next patch is by me and fixes an erroneous flexcan_transceiver_enable()
during bus-off recovery in the flexcan driver.
Jarkko Nikula's patch for the m_can driver fixes the IRQ handler to only
process the interrupts if the device is not suspended.
* tag 'linux-can-fixes-for-5.10-
20201118' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: m_can: process interrupt only when not runtime suspended
can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery
can: kvaser_usb: kvaser_usb_hydra: Fix KCAN bittiming limits
can: kvaser_pciefd: Fix KCAN bittiming limits
====================
Link: https://lore.kernel.org/r/20201118160414.2731659-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Aya Levin [Wed, 18 Nov 2020 08:19:22 +0000 (10:19 +0200)]
net/mlx4_core: Fix init_hca fields offset
Slave function read the following capabilities from the wrong offset:
1. log_mc_entry_sz
2. fs_log_entry_sz
3. log_mc_hash_sz
Fix that by adjusting these capabilities offset to match firmware
layout.
Due to the wrong offset read, the following issues might occur:
1+2. Negative value reported at max_mcast_qp_attach.
3. Driver to init FW with multicast hash size of zero.
Fixes:
a40ded604365 ("net/mlx4_core: Add masking for a few queries on HCA caps")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20201118081922.553-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 19 Nov 2020 01:17:32 +0000 (17:17 -0800)]
Merge tag 'mlx5-fixes-2020-11-17' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2020-11-17
This series introduces some fixes to mlx5 driver.
* tag 'mlx5-fixes-2020-11-17' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: fix error return code in mlx5e_tc_nic_init()
net/mlx5: E-Switch, Fail mlx5_esw_modify_vport_rate if qos disabled
net/mlx5: Disable QoS when min_rates on all VFs are zero
net/mlx5: Clear bw_share upon VF disable
net/mlx5: Add handling of port type in rule deletion
net/mlx5e: Fix check if netdev is bond slave
net/mlx5e: Fix IPsec packet drop by mlx5e_tc_update_skb
net/mlx5e: Set IPsec WAs only in IP's non checksum partial case.
net/mlx5e: Fix refcount leak on kTLS RX resync
====================
Link: https://lore.kernel.org/r/20201117195702.386113-1-saeedm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sebastian Andrzej Siewior [Mon, 16 Nov 2020 16:21:14 +0000 (17:21 +0100)]
atm: nicstar: Unmap DMA on send error
The `skb' is mapped for DMA in ns_send() but does not unmap DMA in case
push_scqe() fails to submit the `skb'. The memory of the `skb' is
released so only the DMA mapping is leaking.
Unmap the DMA mapping in case push_scqe() failed.
Fixes:
864a3ff635fa7 ("atm: [nicstar] remove virt_to_bus() and support 64-bit platforms")
Cc: Chas Williams <3chas3@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dongli Zhang [Sun, 15 Nov 2020 20:10:29 +0000 (12:10 -0800)]
page_frag: Recover from memory pressure
The ethernet driver may allocate skb (and skb->data) via napi_alloc_skb().
This ends up to page_frag_alloc() to allocate skb->data from
page_frag_cache->va.
During the memory pressure, page_frag_cache->va may be allocated as
pfmemalloc page. As a result, the skb->pfmemalloc is always true as
skb->data is from page_frag_cache->va. The skb will be dropped if the
sock (receiver) does not have SOCK_MEMALLOC. This is expected behaviour
under memory pressure.
However, once kernel is not under memory pressure any longer (suppose large
amount of memory pages are just reclaimed), the page_frag_alloc() may still
re-use the prior pfmemalloc page_frag_cache->va to allocate skb->data. As a
result, the skb->pfmemalloc is always true unless page_frag_cache->va is
re-allocated, even if the kernel is not under memory pressure any longer.
Here is how kernel runs into issue.
1. The kernel is under memory pressure and allocation of
PAGE_FRAG_CACHE_MAX_ORDER in __page_frag_cache_refill() will fail. Instead,
the pfmemalloc page is allocated for page_frag_cache->va.
2: All skb->data from page_frag_cache->va (pfmemalloc) will have
skb->pfmemalloc=true. The skb will always be dropped by sock without
SOCK_MEMALLOC. This is an expected behaviour.
3. Suppose a large amount of pages are reclaimed and kernel is not under
memory pressure any longer. We expect skb->pfmemalloc drop will not happen.
4. Unfortunately, page_frag_alloc() does not proactively re-allocate
page_frag_alloc->va and will always re-use the prior pfmemalloc page. The
skb->pfmemalloc is always true even kernel is not under memory pressure any
longer.
Fix this by freeing and re-allocating the page instead of recycling it.
References: https://lore.kernel.org/lkml/
20201103193239.1807-1-dongli.zhang@oracle.com/
References: https://lore.kernel.org/linux-mm/
20201105042140.5253-1-willy@infradead.org/
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Cc: Bert Barbe <bert.barbe@oracle.com>
Cc: Rama Nichanamatlu <rama.nichanamatlu@oracle.com>
Cc: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Cc: Manjunath Patil <manjunath.b.patil@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Cc: SRINIVAS <srinivas.eeda@oracle.com>
Fixes:
79930f5892e1 ("net: do not deplete pfmemalloc reserve")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201115201029.11903-1-dongli.zhang@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rodrigo Siqueira [Tue, 17 Nov 2020 14:33:51 +0000 (09:33 -0500)]
drm/amd/display: Always get CRTC updated constant values inside commit tail
We recently improved our display atomic commit and tail sequence to
avoid some issues related to concurrency. One of the major changes
consisted of moving the interrupt disable and the stream release from
our atomic commit to our atomic tail (commit
6d90a208cfff
("drm/amd/display: Move disable interrupt into commit tail")) .
However, the new code introduced inside our commit tail function was
inserted right after the function
drm_atomic_helper_update_legacy_modeset_state(), which has routines for
updating internal data structs related to timestamps. As a result, in
certain conditions, the display module can reach a situation where we
update our constants and, after that, clean it. This situation generates
the following warning:
amdgpu 0000:03:00.0: drm_WARN_ON_ONCE(drm_drv_uses_atomic_modeset(dev))
WARNING: CPU: 6 PID: 1269 at drivers/gpu/drm/drm_vblank.c:722
drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x32b/0x340 [drm]
...
RIP:
0010:drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x32b/0x340
[drm]
...
Call Trace:
? dc_stream_get_vblank_counter+0x57/0x60 [amdgpu]
drm_crtc_vblank_helper_get_vblank_timestamp+0x1c/0x20 [drm]
drm_get_last_vbltimestamp+0xad/0xc0 [drm]
drm_reset_vblank_timestamp+0x63/0xd0 [drm]
drm_crtc_vblank_on+0x85/0x150 [drm]
amdgpu_dm_atomic_commit_tail+0xaf1/0x2330 [amdgpu]
commit_tail+0x99/0x130 [drm_kms_helper]
drm_atomic_helper_commit+0x123/0x150 [drm_kms_helper]
amdgpu_dm_atomic_commit+0x11/0x20 [amdgpu]
drm_atomic_commit+0x4a/0x50 [drm]
drm_atomic_helper_set_config+0x7c/0xc0 [drm_kms_helper]
drm_mode_setcrtc+0x20b/0x7e0 [drm]
? tomoyo_path_number_perm+0x6f/0x200
? drm_mode_getcrtc+0x190/0x190 [drm]
drm_ioctl_kernel+0xae/0xf0 [drm]
drm_ioctl+0x245/0x400 [drm]
? drm_mode_getcrtc+0x190/0x190 [drm]
amdgpu_drm_ioctl+0x4e/0x80 [amdgpu]
__x64_sys_ioctl+0x91/0xc0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xa9
...
For fixing this issue we rely upon a refactor introduced on
drm_atomic_helper_update_legacy_modeset_state ("Remove the timestamping
constant update from drm_atomic_helper_update_legacy_modeset_state()")
which decouples constant values update from
drm_atomic_helper_update_legacy_modeset_state to a new helper.
Basically, this commit uses this new helper and place it right after our
release module to avoid a situation where our CRTC struct gets wrong
values.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1373
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1349
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Linus Torvalds [Wed, 18 Nov 2020 20:12:18 +0000 (12:12 -0800)]
Merge tag 'gfs2-v5.10-rc4-fixes' of git://git./linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fix from Andreas Gruenbacher:
"Fix gfs2 freeze/thaw"
* tag 'gfs2-v5.10-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix regression in freeze_go_sync
Linus Torvalds [Wed, 18 Nov 2020 20:06:34 +0000 (12:06 -0800)]
Merge tag 'nfsd-5.10-2' of git://linux-nfs.org/~bfields/linux
Pull nfsd fix from Bruce Fields:
"Just one quick fix for a tracing oops"
* tag 'nfsd-5.10-2' of git://linux-nfs.org/~bfields/linux:
SUNRPC: Fix oops in the rpc_xdr_buf event class
Linus Torvalds [Wed, 18 Nov 2020 19:57:55 +0000 (11:57 -0800)]
Merge tag 'linux-kselftest-kunit-fixes-5.10-rc5' of git://git./linux/kernel/git/shuah/linux-kselftest
Pull Kunit fixes from Shuah Khan:
"Several fixes to Kunit documentation and tools, and to not pollute
the source directory.
Also remove the incorrect kunit .gitattributes file"
* tag 'linux-kselftest-kunit-fixes-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: fix display of failed expectations for strings
kunit: tool: fix extra trailing \n in raw + parsed test output
kunit: tool: print out stderr from make (like build warnings)
KUnit: Docs: usage: wording fixes
KUnit: Docs: style: fix some Kconfig example issues
KUnit: Docs: fix a wording typo
kunit: Do not pollute source directory with generated files (test.log)
kunit: Do not pollute source directory with generated files (.kunitconfig)
kunit: tool: fix pre-existing python type annotation errors
kunit: Fix kunit.py parse subcommand (use null build_dir)
kunit: tool: unmark test_data as binary blobs
Andrew Lunn [Mon, 16 Nov 2020 16:43:01 +0000 (08:43 -0800)]
net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset
When the switch is hardware reset, it reads the contents of the
EEPROM. This can contain instructions for programming values into
registers and to perform waits between such programming. Reading the
EEPROM can take longer than the 100ms mv88e6xxx_hardware_reset() waits
after deasserting the reset GPIO. So poll the EEPROM done bit to
ensure it is complete.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ruslan Sushko <rus@sushko.dev>
Link: https://lore.kernel.org/r/20201116164301.977661-1-rus@sushko.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 18 Nov 2020 19:07:03 +0000 (11:07 -0800)]
Merge branch 'mlxsw-couple-of-fixes'
Ido Schimmel says:
====================
mlxsw: Couple of fixes
Patch #1 fixes firmware flashing when CONFIG_MLXSW_CORE=y and
CONFIG_MLXFW=m.
Patch #2 prevents EMAD transactions from needlessly failing when the
system is under heavy load by using exponential backoff.
Please consider patch #2 for stable.
====================
Link: https://lore.kernel.org/r/20201117173352.288491-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Tue, 17 Nov 2020 17:33:52 +0000 (19:33 +0200)]
mlxsw: core: Use variable timeout for EMAD retries
The driver sends Ethernet Management Datagram (EMAD) packets to the
device for configuration purposes and waits for up to 200ms for a reply.
A request is retried up to 5 times.
When the system is under heavy load, replies are not always processed in
time and EMAD transactions fail.
Make the process more robust to such delays by using exponential
backoff. First wait for up to 200ms, then retransmit and wait for up to
400ms and so on.
Fixes:
caf7297e7ab5 ("mlxsw: core: Introduce support for asynchronous EMAD register access")
Reported-by: Denis Yulevich <denisyu@nvidia.com>
Tested-by: Denis Yulevich <denisyu@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Tue, 17 Nov 2020 17:33:51 +0000 (19:33 +0200)]
mlxsw: Fix firmware flashing
The commit cited below moved firmware flashing functionality from
mlxsw_spectrum to mlxsw_core, but did not adjust the Kconfig
dependencies. This makes it possible to have mlxsw_core as built-in and
mlxfw as a module. The mlxfw code is therefore not reachable from
mlxsw_core and firmware flashing fails:
# devlink dev flash pci/0000:01:00.0 file mellanox/mlxsw_spectrum-13.2008.1310.mfa2
devlink answers: Operation not supported
Fix by having mlxsw_core select mlxfw.
Fixes:
b79cb787ac70 ("mlxsw: Move fw flashing code into core.c")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reported-by: Vadim Pasternak <vadimp@nvidia.com>
Tested-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Fainelli [Tue, 17 Nov 2020 03:52:34 +0000 (19:52 -0800)]
net: Have netpoll bring-up DSA management interface
DSA network devices rely on having their DSA management interface up and
running otherwise their ndo_open() will return -ENETDOWN. Without doing
this it would not be possible to use DSA devices as netconsole when
configured on the command line. These devices also do not utilize the
upper/lower linking so the check about the netpoll device having upper
is not going to be a problem.
The solution adopted here is identical to the one done for
net/ipv4/ipconfig.c with
728c02089a0e ("net: ipv4: handle DSA enabled
master network devices"), with the network namespace scope being
restricted to that of the process configuring netpoll.
Fixes:
04ff53f96a93 ("net: dsa: Add netconsole support")
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20201117035236.22658-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zhang Changzhong [Tue, 17 Nov 2020 02:57:55 +0000 (10:57 +0800)]
atl1e: fix error return code in atl1e_probe()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes:
a6a5325239c2 ("atl1e: Atheros L1E Gigabit Ethernet driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1605581875-36281-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zhang Changzhong [Tue, 17 Nov 2020 02:55:21 +0000 (10:55 +0800)]
atl1c: fix error return code in atl1c_probe()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes:
43250ddd75a3 ("atl1c: Atheros L1C Gigabit Ethernet driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1605581721-36028-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zhang Changzhong [Tue, 17 Nov 2020 02:45:05 +0000 (10:45 +0800)]
ah6: fix error return code in ah6_input()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1605581105-35295-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Filip Moc [Tue, 17 Nov 2020 17:36:31 +0000 (18:36 +0100)]
net: usb: qmi_wwan: Set DTR quirk for MR400
LTE module MR400 embedded in TL-MR6400 v4 requires DTR to be set.
Signed-off-by: Filip Moc <dev@moc6.cz>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20201117173631.GA550981@moc6.cz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nishanth Menon [Wed, 18 Nov 2020 14:50:09 +0000 (08:50 -0600)]
regulator: ti-abb: Fix array out of bound read access on the first transition
At the start of driver initialization, we do not know what bias
setting the bootloader has configured the system for and we only know
for certain the very first time we do a transition.
However, since the initial value of the comparison index is -EINVAL,
this negative value results in an array out of bound access on the
very first transition.
Since we don't know what the setting is, we just set the bias
configuration as there is nothing to compare against. This prevents
the array out of bound access.
NOTE: Even though we could use a more relaxed check of "< 0" the only
valid values(ignoring cosmic ray induced bitflips) are -EINVAL, 0+.
Fixes:
40b1936efebd ("regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver")
Link: https://lore.kernel.org/linux-mm/CA+G9fYuk4imvhyCN7D7T6PMDH6oNp6HDCRiTUKMQ6QXXjBa4ag@mail.gmail.com/
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20201118145009.10492-1-nm@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Guenter Roeck [Wed, 11 Nov 2020 20:54:34 +0000 (12:54 -0800)]
ASOC: Intel: kbl_rt5663_rt5514_max98927: Do not try to disable disabled clock
In kabylake_set_bias_level(), enabling mclk may fail if the clock has
already been enabled by the firmware. Attempts to disable that clock
later will fail with a warning backtrace.
mclk already disabled
WARNING: CPU: 2 PID: 108 at drivers/clk/clk.c:952 clk_core_disable+0x1b6/0x1cf
...
Call Trace:
clk_disable+0x2d/0x3a
kabylake_set_bias_level+0x72/0xfd [snd_soc_kbl_rt5663_rt5514_max98927]
snd_soc_card_set_bias_level+0x2b/0x6f
snd_soc_dapm_set_bias_level+0xe1/0x209
dapm_pre_sequence_async+0x63/0x96
async_run_entry_fn+0x3d/0xd1
process_one_work+0x2a9/0x526
...
Only disable the clock if it has been enabled.
Fixes:
15747a802075 ("ASoC: eve: implement set_bias_level function for rt5514")
Cc: Brent Lu <brent.lu@intel.com>
Cc: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201111205434.207610-1-linux@roeck-us.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Yu Kuai [Wed, 18 Nov 2020 17:21:26 +0000 (09:21 -0800)]
xfs: return corresponding errcode if xfs_initialize_perag() fail
In xfs_initialize_perag(), if kmem_zalloc(), xfs_buf_hash_init(), or
radix_tree_preload() failed, the returned value 'error' is not set
accordingly.
Reported-as-fixing:
8b26c5825e02 ("xfs: handle ENOMEM correctly during initialisation of perag structures")
Fixes:
9b2471797942 ("xfs: cache unlinked pointers in an rhashtable")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Darrick J. Wong [Sat, 14 Nov 2020 17:59:22 +0000 (09:59 -0800)]
xfs: ensure inobt record walks always make forward progress
The aim of the inode btree record iterator function is to call a
callback on every record in the btree. To avoid having to tear down and
recreate the inode btree cursor around every callback, it caches a
certain number of records in a memory buffer. After each batch of
callback invocations, we have to perform a btree lookup to find the
next record after where we left off.
However, if the keys of the inode btree are corrupt, the lookup might
put us in the wrong part of the inode btree, causing the walk function
to loop forever. Therefore, we add extra cursor tracking to make sure
that we never go backwards neither when performing the lookup nor when
jumping to the next inobt record. This also fixes an off by one error
where upon resume the lookup should have been for the inode /after/ the
point at which we stopped.
Found by fuzzing xfs/460 with keys[2].startino = ones causing bulkstat
and quotacheck to hang.
Fixes:
a211432c27ff ("xfs: create simplified inode walk function")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Gao Xiang [Sat, 14 Nov 2020 19:06:01 +0000 (11:06 -0800)]
xfs: fix forkoff miscalculation related to XFS_LITINO(mp)
Currently, commit
e9e2eae89ddb dropped a (int) decoration from
XFS_LITINO(mp), and since sizeof() expression is also involved,
the result of XFS_LITINO(mp) is simply as the size_t type
(commonly unsigned long).
Considering the expression in xfs_attr_shortform_bytesfit():
offset = (XFS_LITINO(mp) - bytes) >> 3;
let "bytes" be (int)340, and
"XFS_LITINO(mp)" be (unsigned long)336.
on 64-bit platform, the expression is
offset = ((unsigned long)336 - (int)340) >> 3 =
(int)(0xfffffffffffffffcUL >> 3) = -1
but on 32-bit platform, the expression is
offset = ((unsigned long)336 - (int)340) >> 3 =
(int)(0xfffffffcUL >> 3) = 0x1fffffff
instead.
so offset becomes a large positive number on 32-bit platform, and
cause xfs_attr_shortform_bytesfit() returns maxforkoff rather than 0.
Therefore, one result is
"ASSERT(new_size <= XFS_IFORK_SIZE(ip, whichfork));"
assertion failure in xfs_idata_realloc(), which was also the root
cause of the original bugreport from Dennis, see:
https://bugzilla.redhat.com/show_bug.cgi?id=
1894177
And it can also be manually triggered with the following commands:
$ touch a;
$ setfattr -n user.0 -v "`seq 0 80`" a;
$ setfattr -n user.1 -v "`seq 0 80`" a
on 32-bit platform.
Fix the case in xfs_attr_shortform_bytesfit() by bailing out
"XFS_LITINO(mp) < bytes" in advance suggested by Eric and a misleading
comment together with this bugfix suggested by Darrick. It seems the
other users of XFS_LITINO(mp) are not impacted.
Fixes:
e9e2eae89ddb ("xfs: only check the superblock version for dinode size calculation")
Cc: <stable@vger.kernel.org> # 5.7+
Reported-and-tested-by: Dennis Gilmore <dgilmore@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Darrick J. Wong [Mon, 9 Nov 2020 00:32:42 +0000 (16:32 -0800)]
xfs: directory scrub should check the null bestfree entries too
Teach the directory scrubber to check all the bestfree entries,
including the null ones. We want to be able to detect the case where
the entry is null but there actually /is/ a directory data block.
Found by fuzzing lbests[0] = ones in xfs/391.
Fixes:
df481968f33b ("xfs: scrub directory freespace")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Darrick J. Wong [Mon, 9 Nov 2020 00:32:41 +0000 (16:32 -0800)]
xfs: strengthen rmap record flags checking
We always know the correct state of the rmap record flags (attr, bmbt,
unwritten) so check them by direct comparison.
Fixes:
d852657ccfc0 ("xfs: cross-reference reverse-mapping btree")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Darrick J. Wong [Mon, 9 Nov 2020 00:32:41 +0000 (16:32 -0800)]
xfs: fix the minrecs logic when dealing with inode root child blocks
The comment and logic in xchk_btree_check_minrecs for dealing with
inode-rooted btrees isn't quite correct. While the direct children of
the inode root are allowed to have fewer records than what would
normally be allowed for a regular ondisk btree block, this is only true
if there is only one child block and the number of records don't fit in
the inode root.
Fixes:
08a3a692ef58 ("xfs: btree scrub should check minrecs")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Jarkko Nikula [Tue, 15 Sep 2020 13:47:15 +0000 (16:47 +0300)]
can: m_can: process interrupt only when not runtime suspended
Avoid processing bogus interrupt statuses when the HW is runtime suspended and
the M_CAN_IR register read may get all bits 1's. Handler can be called if the
interrupt request is shared with other peripherals or at the end of free_irq().
Therefore check the runtime suspended status before processing.
Fixes:
cdf8259d6573 ("can: m_can: Add PM Support")
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20200915134715.696303-1-jarkko.nikula@linux.intel.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Bob Peterson [Wed, 18 Nov 2020 13:54:31 +0000 (08:54 -0500)]
gfs2: Fix regression in freeze_go_sync
Patch
541656d3a513 ("gfs2: freeze should work on read-only mounts") changed
the check for glock state in function freeze_go_sync() from "gl->gl_state
== LM_ST_SHARED" to "gl->gl_req == LM_ST_EXCLUSIVE". That's wrong and it
regressed gfs2's freeze/thaw mechanism because it caused only the freezing
node (which requests the glock in EX) to queue freeze work.
All nodes go through this go_sync code path during the freeze to drop their
SHared hold on the freeze glock, allowing the freezing node to acquire it
in EXclusive mode. But all the nodes must freeze access to the file system
locally, so they ALL must queue freeze work. The freeze_work calls
freeze_func, which makes a request to reacquire the freeze glock in SH,
effectively blocking until the thaw from the EX holder. Once thawed, the
freezing node drops its EX hold on the freeze glock, then the (blocked)
freeze_func reacquires the freeze glock in SH again (on all nodes, including
the freezer) so all nodes go back to a thawed state.
This patch changes the check back to gl_state == LM_ST_SHARED like it was
prior to
541656d3a513.
Fixes:
541656d3a513 ("gfs2: freeze should work on read-only mounts")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Marc Kleine-Budde [Wed, 18 Nov 2020 15:01:48 +0000 (16:01 +0100)]
can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery
If the CAN controller goes into bus off, the do_set_mode() callback with
CAN_MODE_START can be used to recover the controller, which then calls
flexcan_chip_start(). If configured, this is done automatically by the
framework or manually by the user.
In flexcan_chip_start() there is an explicit call to
flexcan_transceiver_enable(), which does a regulator_enable() on the
transceiver regulator. This results in a net usage counter increase, as there
is no corresponding flexcan_transceiver_disable() in the bus off code path.
This further leads to the transceiver stuck enabled, even if the CAN interface
is shut down.
To fix this problem the
flexcan_transceiver_enable()/flexcan_transceiver_disable() are moved out of
flexcan_chip_start()/flexcan_chip_stop() into flexcan_open()/flexcan_close().
Fixes:
e955cead0311 ("CAN: Add Flexcan CAN controller driver")
Link: https://lore.kernel.org/r/20201118150148.2664024-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Pavel Begunkov [Wed, 18 Nov 2020 14:56:26 +0000 (14:56 +0000)]
io_uring: order refnode recycling
Don't recycle a refnode until we're done with all requests of nodes
ejected before.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Wed, 18 Nov 2020 14:56:25 +0000 (14:56 +0000)]
io_uring: get an active ref_node from files_data
An active ref_node always can be found in ctx->files_data, it's much
safer to get it this way instead of poking into files_data->ref_list.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Zhenzhong Duan [Tue, 10 Nov 2020 07:19:08 +0000 (15:19 +0800)]
iommu/vt-d: Avoid panic if iommu init fails in tboot system
"intel_iommu=off" command line is used to disable iommu but iommu is force
enabled in a tboot system for security reason.
However for better performance on high speed network device, a new option
"intel_iommu=tboot_noforce" is introduced to disable the force on.
By default kernel should panic if iommu init fail in tboot for security
reason, but it's unnecessory if we use "intel_iommu=tboot_noforce,off".
Fix the code setting force_on and move intel_iommu_tboot_noforce
from tboot code to intel iommu code.
Fixes:
7304e8f28bb2 ("iommu/vt-d: Correctly disable Intel IOMMU force on")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Tested-by: Lukasz Hawrylko <lukasz.hawrylko@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201110071908.3133-1-zhenzhong.duan@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Dan Carpenter [Fri, 13 Nov 2020 10:16:31 +0000 (13:16 +0300)]
dmaengine: fix error codes in channel_register()
The error codes were not set on some of these error paths.
Also the error handling was more confusing than it needed to be so I
cleaned it up and shuffled it around a bit.
Fixes:
d2fb0a043838 ("dmaengine: break out channel registration")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201113101631.GE168908@mwanda
Signed-off-by: Vinod Koul <vkoul@kernel.org>