OSDN Git Service
Michael S. Tsirkin [Mon, 24 Sep 2012 11:02:52 +0000 (13:02 +0200)]
iov: add iov_cpy
Add API to copy part of iovec safely.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael S. Tsirkin [Mon, 24 Sep 2012 10:12:25 +0000 (12:12 +0200)]
virtio-net: track host/guest header length
Tracking these in device state instead of
re-calculating on each packet. No functional
changes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Baron [Fri, 19 Oct 2012 20:43:33 +0000 (16:43 -0400)]
pcie: Convert PCIExpressHost to use the QOM.
Let's use PCIExpressHost with QOM.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Baron [Fri, 19 Oct 2012 20:43:32 +0000 (16:43 -0400)]
pcie: pass pcie window size to pcie_host_mmcfg_update()
This allows q35 to pass/set the size of the pcie window in its update routine.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jan Kiszka [Fri, 19 Oct 2012 20:43:31 +0000 (16:43 -0400)]
pci: Add class 0xc05 as 'SMBus'
[jbaron@redhat.com: add PCI_CLASS_SERIAL_SMBUS definition]
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Isaku Yamahata [Fri, 19 Oct 2012 20:43:28 +0000 (16:43 -0400)]
pci: introduce pci_swizzle_map_irq_fn() for standardized interrupt pin swizzle
Introduce pci_swizzle_map_irq_fn() for interrupt pin swizzle which is
standardized. PCI bridge swizzle is common logic, by introducing
this function duplicated swizzle logic will be avoided later.
[jbaron@redhat.com: drop opaque argument]
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Isaku Yamahata [Fri, 19 Oct 2012 20:43:31 +0000 (16:43 -0400)]
pci_ids: add intel
82801BA pci-to-pci bridge id
Adds pci id constants which will be used by q35.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Isaku Yamahata [Fri, 19 Oct 2012 20:43:28 +0000 (16:43 -0400)]
pci: pci capability must be in PCI space
pci capability must be in PCI space.
It can't lay in PCIe extended config space.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael S. Tsirkin [Mon, 22 Oct 2012 10:35:00 +0000 (12:35 +0200)]
pci: make each capability DWORD aligned
PCI spec (see e.g. 6.7 Capabilities List in spec rev 3.0)
requires that each capability is DWORD aligned.
Ensure this when allocating space by rounding size up to 4.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael S. Tsirkin [Wed, 17 Oct 2012 22:15:48 +0000 (00:15 +0200)]
qemu: enable PV EOI for qemu 1.3
Enable KVM PV EOI by default. You can still disable it with
-kvm_pv_eoi cpu flag. To avoid breaking cross-version migration,
enable only for qemu 1.3 (or in the future, newer) machine type.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Alex Williamson [Wed, 17 Oct 2012 22:13:12 +0000 (16:13 -0600)]
pci: Return PCI_INTX_DISABLED when no bus INTx routing support
Rather than assert, simply return PCI_INTX_DISABLED when we don't
have a pci_route_irq_fn. PIIX already returns DISABLED for an
invalid pin, so users already deal with this state. Users of this
interface should only be acting on an ENABLED or INVERTED return
value (though we really have no support for INVERTED). Also
complain loudly when we hit this so we don't forget it's missing.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Alex Williamson [Tue, 2 Oct 2012 19:22:14 +0000 (13:22 -0600)]
pci-assign: Use msi_get_message()
pci-assign only uses a subset of the flexibility msi_get_message()
provides, but it's still worthwhile to use it.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Alex Williamson [Tue, 2 Oct 2012 19:22:07 +0000 (13:22 -0600)]
msi: Add msi_get_message()
vfio-pci and pci-assign both do this on their own for setting up
direct MSI injection through KVM. Provide a helper function for
this in MSI code.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Alex Williamson [Tue, 2 Oct 2012 19:22:01 +0000 (13:22 -0600)]
pci-assign: Use pci_intx_route_changed()
Replace open coded version
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Alex Williamson [Tue, 2 Oct 2012 19:21:54 +0000 (13:21 -0600)]
pci: Helper function for testing if an INTx route changed
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Aurelien Jarno [Mon, 29 Oct 2012 13:56:17 +0000 (14:56 +0100)]
Merge branch 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf: (22 commits)
PPC: pseries: Remove hack for PIO window
PPC: e500: Map PIO space into core memory region
xen_platform: convert PIO to new memory api read/write
vmport: convert PIO to new memory api read/write
serial: convert PIO to new memory api read/write
rtl8139: convert PIO to new memory api read/write
pckbd: convert PIO to new memory api read/write
pc port92: convert PIO to new memory api read/write
mc146818rtc: convert PIO to new memory api read/write
m48t59: convert PIO to new memory api read/write
i8254: convert PIO to new memory api read/write
es1370: convert PIO to new memory api read/write
virtio-pci: convert PIO to new memory api read/write
ac97: convert PIO to new memory api read/write
pseries: Implement qemu initiated shutdowns using EPOW events
target-ppc: Rework storage of VPA registration state
pseries: Don't allow duplicate registration of hcalls or RTAS calls
Add USB option in machine options
e500: Fix serial initialization
PPC: 440: Emulate DCBR0
...
Aurelien Jarno [Mon, 29 Oct 2012 13:55:51 +0000 (14:55 +0100)]
Merge branch 'queue/qmp' of git://repo.or.cz/qemu/qmp-unstable
* 'queue/qmp' of git://repo.or.cz/qemu/qmp-unstable:
migration: go to paused state after finishing incoming migration with -S
qmp: handle stop/cont in INMIGRATE state
hmp: fix info cpus for sparc targets
Alexander Graf [Mon, 8 Oct 2012 11:54:18 +0000 (13:54 +0200)]
PPC: pseries: Remove hack for PIO window
Now that all users of old_portio are gone, we can remove the hack
that enabled us to support them.
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Mon, 8 Oct 2012 10:21:30 +0000 (12:21 +0200)]
PPC: e500: Map PIO space into core memory region
On PPC, we don't have PIO. So usually PIO space behind a PCI bridge is
accessible via MMIO. Do this mapping explicitly by mapping the PIO space
of our PCI bus into a memory region that lives in memory space.
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Mon, 8 Oct 2012 11:47:30 +0000 (13:47 +0200)]
xen_platform: convert PIO to new memory api read/write
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Mon, 8 Oct 2012 11:44:24 +0000 (13:44 +0200)]
vmport: convert PIO to new memory api read/write
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Mon, 8 Oct 2012 11:40:29 +0000 (13:40 +0200)]
serial: convert PIO to new memory api read/write
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Mon, 8 Oct 2012 11:35:24 +0000 (13:35 +0200)]
rtl8139: convert PIO to new memory api read/write
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Mon, 8 Oct 2012 11:30:08 +0000 (13:30 +0200)]
pckbd: convert PIO to new memory api read/write
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Mon, 8 Oct 2012 11:24:52 +0000 (13:24 +0200)]
pc port92: convert PIO to new memory api read/write
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Mon, 8 Oct 2012 11:22:28 +0000 (13:22 +0200)]
mc146818rtc: convert PIO to new memory api read/write
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Mon, 8 Oct 2012 11:19:48 +0000 (13:19 +0200)]
m48t59: convert PIO to new memory api read/write
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Mon, 8 Oct 2012 11:12:31 +0000 (13:12 +0200)]
i8254: convert PIO to new memory api read/write
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Mon, 8 Oct 2012 11:09:44 +0000 (13:09 +0200)]
es1370: convert PIO to new memory api read/write
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Mon, 8 Oct 2012 11:02:30 +0000 (13:02 +0200)]
virtio-pci: convert PIO to new memory api read/write
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Mon, 8 Oct 2012 11:02:20 +0000 (13:02 +0200)]
ac97: convert PIO to new memory api read/write
Signed-off-by: Alexander Graf <agraf@suse.de>
David Gibson [Mon, 8 Oct 2012 18:17:39 +0000 (18:17 +0000)]
pseries: Implement qemu initiated shutdowns using EPOW events
At present, using 'system_powerdown' from the monitor or otherwise
instructing qemu to (cleanly) shut down a pseries guest will not work,
because we did not have a method of signalling the shutdown request to the
guest.
PAPR does include a usable mechanism for this, though it is rather more
involved than the equivalent on x86. This involves sending an EPOW
(Environmental and POwer Warning) event through the PAPR event and error
logging mechanism, which also has a number of other functions.
This patch implements just enough of the event/error logging functionality
to be able to send a shutdown event to the guest. At least with modern
guest kernels and a userspace that is up and running, this means that
system_powerdown from the qemu monitor should now work correctly on pseries
guests.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
David Gibson [Mon, 8 Oct 2012 18:17:38 +0000 (18:17 +0000)]
target-ppc: Rework storage of VPA registration state
With PAPR guests, hypercalls allow registration of the Virtual Processor
Area (VPA), SLB shadow and dispatch trace log (DTL), each of which allow
for certain communication between the guest and hypervisor. Currently, we
store the addresses of the three areas and the size of the dtl in
CPUPPCState.
The SLB shadow and DTL are variable sized, with the size being retrieved
from within the registered memory area at the hypercall time. This size
can later be overwritten with other information, however, so we need to
save the size as of registration time. We already do this for the DTL,
but not for the SLB shadow, so this patch fixes that.
In addition, we change the storage of the VPA information to use fixed
size integer types which will make life easier for syncing this data with
KVM, which we will need in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
David Gibson [Mon, 8 Oct 2012 18:17:36 +0000 (18:17 +0000)]
pseries: Don't allow duplicate registration of hcalls or RTAS calls
Currently the pseries machine code allows a callback to be registered
for a hypercall number twice, as long as it's the same callback the second
time. We don't test for duplicate registrations of RTAS callbacks at all
so it will effectively be last registratiojn wins.
This was originally done because it was awkward to ensure that the
registration happened exactly once, but the code has since been
restructured so that's no longer the case.
Duplicate registration of a hypercall or RTAS call could well suggest
a duplicate initialization which could cause other problems, so this patch
makes duplicate registrations a bug, to prevent the old behaviour from
hiding other bugs.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
zhlcindy@gmail.com [Sun, 2 Sep 2012 19:25:28 +0000 (19:25 +0000)]
Add USB option in machine options
When -usb option is used, global varible usb_enabled is set.
And all the plaform will create one USB controller according
to this variable. In fact, global varibles make code hard
to read.
So this patch is to remove global variable usb_enabled and
add USB option in machine options. All the plaforms will get
USB option value from machine options.
USB option of machine options will be set either by:
* -usb
* -machine type=pseries,usb=on
Both these ways can work now. They both set USB option in
machine options. In the future, the first way will be removed.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Bharat Bhushan [Mon, 8 Oct 2012 06:46:54 +0000 (06:46 +0000)]
e500: Fix serial initialization
it was wrongly using serial_hds[0] instead of serial_hds[1]
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Sat, 6 Oct 2012 20:54:25 +0000 (22:54 +0200)]
PPC: 440: Emulate DCBR0
The DCBR0 register on 440 is used to implement system reset. The same
register is used on 405 as well, so just reuse the code.
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Sat, 6 Oct 2012 00:02:05 +0000 (02:02 +0200)]
PPC: Bamboo: Fix memory size DT property
Device tree properties need to be specified in big endian. Fix the
bamboo memory size property accordingly.
Signed-off-by: Alexander Graf <agraf@suse.de>
CC: qemu-stable@nongnu.org
Peter Maydell [Fri, 5 Oct 2012 07:09:02 +0000 (07:09 +0000)]
Drop unnecessary check of TARGET_PHYS_ADDR_SPACE_BITS
For all our PPC targets the physical address space is at least
36 bits, so drop an unnecessary preprocessor conditional check
on TARGET_PHYS_ADDR_SPACE_BITS (erroneously introduced as part
of the change from target_phys_addr_t to hwaddr). This brings
this bit of code into line with the way we handle the other
cases which were originally checking TARGET_PHYS_ADDR_BITS in
order to avoid compiler complaints about overflowing a 32 bit type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Eduardo Habkost [Wed, 24 Oct 2012 14:10:33 +0000 (12:10 -0200)]
target-i386: cpu: recover items 28-31 of ext2_feature_name
I removed a line by mistake on commit
3b671a40cab2404bc63e57db8cd3afa4ec70bfab, containing the flags lm/i64,
3dnow, and 3dnowext. This patch restores the removed line.
Reviewed-by: Don Slutz <Don@cloudswitch.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Richard Henderson [Mon, 22 Oct 2012 21:33:00 +0000 (07:33 +1000)]
qemu-timer: Check for usable fields for SIGEV_THREAD_ID
Older glibc (RHEL 5.x, Debian 5.x) does not have the _sigev_un._tid
member in its structure definition, while the accompanying kernel
headers do define SIGEV_THREAD_ID. We need configure to check for
both before using it.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Richard Henderson [Mon, 22 Oct 2012 02:11:07 +0000 (12:11 +1000)]
tcg-i386: Use %gs prefixes for x86_64 GUEST_BASE
When we allocate a reserved_va for the guest, the kernel will likely
choose an address well above 4G. At which point we must use a pair
of movabsq+addq to form the host address. If we have OS support,
set up a segment register to point to guest_base instead.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Richard Henderson [Tue, 9 Oct 2012 19:53:19 +0000 (21:53 +0200)]
target-mips: Use TCG registers for the FPU.
With normal FP, this doesn't have much affect on the generated code,
because most of the FP operations are not CONST/PURE, and so we spill
registers in about the same frequency as the explicit load/stores.
But with Loongson multimedia instructions, which are all integral and
whose helpers are in fact CONST+PURE, this greatly improves the code.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:09 +0000 (21:53 +0200)]
tcg: remove compatiblity call flags
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:09 +0000 (21:53 +0200)]
target-xtensa: rename helper flags
Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:09 +0000 (21:53 +0200)]
target-sparc: rename helper flags
Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Acked-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:09 +0000 (21:53 +0200)]
target-sh4: rename helper flags
Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:09 +0000 (21:53 +0200)]
target-s390x: rename helper flags
Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Cc: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:09 +0000 (21:53 +0200)]
target-ppc: rename helper flags
Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Cc: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:09 +0000 (21:53 +0200)]
target-mips: rename helper flags
Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:09 +0000 (21:53 +0200)]
target-microblaze: rename helper flags
Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:08 +0000 (21:53 +0200)]
target-i386: rename helper flags
Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:08 +0000 (21:53 +0200)]
target-cris: rename helper flags
Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:08 +0000 (21:53 +0200)]
target-arm: rename helper flags
Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Cc: Paul Brook <paul@codesourcery.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:08 +0000 (21:53 +0200)]
target-alpha: rename helper flags
Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:08 +0000 (21:53 +0200)]
tcg: rework TCG helper flags
The current helper flags, TCG_CALL_CONST and TCG_CALL_PURE might be
confusing and doesn't provide enough granularity for some helpers (FP
helpers for example).
This patch changes them into the following helpers flags:
- TCG_CALL_NO_READ_GLOBALS means that the helper does not read globals,
either directly or via an exception. They will not be saved to their
canonical location before calling the helper.
- TCG_CALL_NO_WRITE_GLOBALS means that the helper does not modify any
globals. They will only be saved to their canonical locations before
calling helpers, but they won't be reloaded afterwise.
- TCG_CALL_NO_SIDE_EFFECTS means that the call to the function is
removed if the return value is not used.
It provides convenience flags, to avoid helper definitions longer than
80 characters. It also provides compatibility flags, and updates the
documentation.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:08 +0000 (21:53 +0200)]
tcg: synchronize globals for ops with side effects
Operations with side effects (in practice qemu_ld/st ops), only need to
synchronize globals to make sure the CPU state is consistent in case of
exception.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:08 +0000 (21:53 +0200)]
tcg: forbid ld/st function to modify globals
Mapping a memory address using a global and accessing it through
ld/st operations is currently broken. As it doesn't make any sense
to do that performance wise, let's forbid that.
Update the TCG documentation, and remove partial support for that.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:08 +0000 (21:53 +0200)]
tcg: fix some op flags
Some branch related ops are marked with TCG_OPF_SIDE_EFFECTS, some other
not. In practice they don't need to, as they are all marked with
TCG_OPF_BB_END, which is handled specifically in all the code.
The call op is marked as TCG_OPF_SIDE_EFFECTS, which might be not true
as there is are specific flags (TCG_CALL_CONST and TCG_CALL_PURE) for
specifying that. On the other hand it always clobber arguments, so mark
it as such even if the call op is handled in a different code path.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:07 +0000 (21:53 +0200)]
tcg: don't explicitly save globals and temps
The liveness analysis ensures that globals and temps are at the correct
state at a basic block end or with an op with side effects. Avoid
looping on all temps, this can be time consuming on targets with a lot
of globals. Keep an assert in debug mode.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:07 +0000 (21:53 +0200)]
tcg: start with local temps in TEMP_VAL_MEM state
Start with local temps in TEMP_VAL_MEM state, to make possible a later
check that all the temps are correctly saved back to memory.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:07 +0000 (21:53 +0200)]
tcg: always mark dead input arguments as dead
Always mark dead input arguments as dead, even if the op is at the basic
block end. This will allow to check that all temps are correctly saved.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:07 +0000 (21:53 +0200)]
tcg: rewrite tcg_reg_alloc_mov()
Now that the liveness analysis provides more information, rewrite
tcg_reg_alloc_mov(). This changes the behaviour about propagating
constants and memory accesses. We now take the assumption that once
a value is loaded into a register (from memory or from a constant),
it's better to keep it there than to reload it later. This assumption
is now always almost correct given that we are now sure the
corresponding temp is going to be used later (otherwise it would have
been synchronized and marked as dead already). The assumption is wrong
if one of the op after clobbers some registers including the one
of the holding the temp (this can be avoided by allocating clobbered
registers last, which is what most TCG target do), or in case of lack
of available register.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:07 +0000 (21:53 +0200)]
tcg: improve tcg_reg_alloc_movi()
Now that the liveness analysis might mark some output temps as dead, call
temp_dead() if needed.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:07 +0000 (21:53 +0200)]
tcg: rework liveness analysis
Rework the liveness analysis by tracking temps that need to go back to
memory in addition to dead temps tracking. This allows to mark output
arguments as "need sync", and to synchronize them back to memory as soon
as they are not written anymore. This way even arguments mapping to
globals can be marked as "dead", avoiding moves to a new register when
input and outputs are aliased.
In addition it means that registers are freed as soon as temps are not
used anymore, instead of waiting for a basic block end or an op with side
effects. This reduces register spilling especially on CPUs with few
registers, and spread the mov over all the TB, increasing the
performances on in-order CPUs.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:07 +0000 (21:53 +0200)]
tcg: sync output arguments on liveness request
Synchronize an output argument when requested by the liveness analysis.
This is needed so that the temp can be declared dead later.
For that, add a new op_sync_args table in which each bit tells if the
corresponding output argument needs to be synchronized with the memory.
Pass it to the tcg_reg_alloc_* functions, and honor this bit. We need to
synchronize the argument before marking it as dead, and we have to make
sure all the infos about the temp are correctly filled.
At the same time change some types from unsigned int to uint16_t when
passing op_dead_args.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:06 +0000 (21:53 +0200)]
tcg: add temp_sync()
Add a new function temp_sync() to synchronize the canonical location
of a temp with the value in the corresponding register, but without
freeing the associated register. Rewrite temp_save() to call
temp_sync() followed by temp_dead().
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:06 +0000 (21:53 +0200)]
tcg: add tcg_reg_sync()
Add a new function tcg_reg_sync() to synchronize the canonical location
of a temp with the value in the associated register, but without freeing
it. Rewrite tcg_reg_free() to first call tcg_reg_sync() and then to free
the register.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:06 +0000 (21:53 +0200)]
tcg: add temp_dead()
A lot of code is duplicated to mark a temporary as dead. Replace it
by temp_dead(), which in addition marks the temp as saved in memory
for globals and local temps, instead of doing this a posteriori in
temp_save().
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Sat, 20 Oct 2012 15:31:44 +0000 (17:31 +0200)]
tcg/i386: remove ld/st third argument register constraint
On x86_64, remove the constraint on the third argument register which
is not needed:
- For loads the helper arguments are env, addr, mem_idx. The addr
value should not be in the two first argument registers as they are
used in tcg_out_tlb_load().
- For stores the helper arguments are env, addr, data, mem_idx.
The addr and data values should not be in the two first argument
registers as they are used in tcg_out_tlb_load(). The data value
should also not be in the two first argument registers, but could
be in the third argument register in which case it would be already
loaded at the right location.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Sat, 20 Oct 2012 15:31:44 +0000 (17:31 +0200)]
tcg/i386: remove suboptimal register shifting
Now that CONFIG_TCG_PASS_AREG0 has been removed, it's easier to get
an optimal code for the load/store functions.
First swap the two registers used in tcg_out_tlb_load() so that the
address end-up in the second register instead of the first one. Adjust
tcg_out_qemu_ld() and tcg_out_qemu_st() to respectively call
tcg_out_qemu_ld_direct() and tcg_out_qemu_st_direct() with the correct
registers. Then replace the register shifting by direct load of the
arguments.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Max Filippov [Thu, 25 Oct 2012 11:37:52 +0000 (15:37 +0400)]
hw/xtensa_sim: get rid of intermediate xtensa_sim_init
Remove xtensa_sim_init that only explodes machine init args, rename
sim_init to xtensa_sim_init.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Max Filippov [Thu, 25 Oct 2012 11:37:51 +0000 (15:37 +0400)]
hw/xtensa_lx60: don't prematurely explode QEMUMachineInitArgs
Don't explode QEMUMachineInitArgs before passing it to lx_init.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Peter Maydell [Fri, 19 Oct 2012 13:54:23 +0000 (14:54 +0100)]
Makefile: Forbid out-of-tree build from a source tree that has been built in
If we try to do an out-of-tree build but the source tree we're building from
has been used in the past for an in-tree build then things will go
confusingly wrong. Specifically, some parts of the build process will pull
in generated files from the old in-tree build (because SRC_PATH is on
the vpath). Diagnose this situation so we can produce a useful error
message and tell the user how to fix it (run distclean in the source tree).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Catalin Patulea [Mon, 22 Oct 2012 23:18:35 +0000 (19:18 -0400)]
tests/tcg: fix a few warnings
Signed-off-by: Catalin Patulea <catalinp@google.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Aurelien Jarno [Sun, 21 Oct 2012 22:50:58 +0000 (00:50 +0200)]
target-sparc64: disable VGA cirrus
OpenBIOS on sparc64 only support Standard VGA and not Cirrus VGA. Don't
build Cirrus VGA support so that it can't be selected.
This fixes the breakage introduced by commit
f2898771.
Reported-by: Richard Henderson <rth@twiddle.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 27 Oct 2012 14:21:37 +0000 (14:21 +0000)]
Merge branch 'target-arm.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm
* 'target-arm.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
target-arm: Remove out of date FIXME regarding saturating arithmetic
target-arm: Implement abs_i32 inline rather than as a helper
target-arm: Use TCG operation for Neon 64 bit negation
arm-semi.c: Handle get/put_user() failure accessing arguments
Bruce Rogers [Mon, 20 Aug 2012 18:45:08 +0000 (12:45 -0600)]
configure: avoid compiler warning in pipe2 detection
When building qemu-kvm for openSUSE:Factory, I am getting a
warning in the pipe2 detection performed by configure, which
prevents using --enable-werror.
Change detection code to use return value of pipe2.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Peter Maydell [Sun, 14 Oct 2012 20:00:39 +0000 (21:00 +0100)]
configure: Disable (clang) initializer-overrides warnings
Disable clang's initializer-overrides warnings, as QEMU makes significant
use of the pattern of initializing an array with a range-based default
entry like
[0 ... 0x1ff] = { GPIO_NONE, 0 }
followed by specific entries which override that default, and clang
would otherwise warn "initializer overrides prior initialization of
this subobject" when it encountered the specific entry.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Luiz Capitulino [Wed, 24 Oct 2012 16:12:15 +0000 (14:12 -0200)]
win32: fix broken build due to missing QEMU_MADV_HUGEPAGE
Commit
ad0b5321f1f797274603ebbe20108b0750baee94 forgot to add
QEMU_MADV_HUGEPAGE macros for when CONFIG_MADVISE is not defined.
This broke the build for Windows. Fix it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Wed, 24 Oct 2012 14:39:49 +0000 (09:39 -0500)]
Merge remote-tracking branch 'bonzini/nbd-next' into staging
* bonzini/nbd-next: (30 commits)
qmp: add NBD server commands
block: add close notifiers
block: prepare code for adding block notifiers
qemu-sockets: add socket_listen, socket_connect, socket_parse
tests: do not include tools-obj-y Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-sockets: return InetSocketAddress from inet_parse
qapi: add socket address types
build: add QAPI files to the tools
vnc: drop QERR_VNC_SERVER_FAILED
qemu-sockets: add error propagation to Unix socket functions
qemu-sockets: add error propagation to inet_parse
qemu-sockets: add error propagation to inet_dgram_opts
qemu-sockets: add error propagation to inet_connect_addr
qemu-sockets: include strerror or gai_strerror output in error messages
vnc: add error propagation to vnc_display_open
vnc: reorganize code for reverse mode
vnc: introduce a single label for error returns
vnc: avoid Yoda conditionals
qemu-ga: ask and print error information from qemu-sockets
nbd: ask and print error information from qemu-sockets
...
Paolo Bonzini [Fri, 19 Oct 2012 14:45:24 +0000 (16:45 +0200)]
migration: go to paused state after finishing incoming migration with -S
At the end of migration the machine has started already, and cannot be
destroyed without losing the guest's data. Hence, prelaunch is the
wrong state. Go to the paused state instead. QEMU would reach that
state anyway (after running the guest for the blink of an eye) if the
"stop" command had been received after the start of migration.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Paolo Bonzini [Tue, 23 Oct 2012 12:54:21 +0000 (14:54 +0200)]
qmp: handle stop/cont in INMIGRATE state
Right now, stop followed by an incoming migration will let the
virtual machine start. cont before an incoming migration instead
will fail.
This is bad because the actual behavior is not predictable; it is
racy with respect to the start of the incoming migration. That's
because incoming migration is blocking, and thus will delay the
processing of stop/cont until the end of the migration.
In addition, there's nothing that really prevents the user from
typing the block device's passwords before incoming migration is
done, so returning the DeviceEncrypted error is also helpful in
the QMP case.
Both things can be fixed by just toggling the autostart variable when
stop/cont are called in INMIGRATE state.
Note that libvirt is currently working around the race by looping
if the MigrationExpected answer is returned. After this patch, the
command will return right away without ever raising an error.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Aurelien Jarno [Fri, 19 Oct 2012 21:19:19 +0000 (23:19 +0200)]
hmp: fix info cpus for sparc targets
On sparc targets, info cpus returns this kind of output:
| info cpus
| * CPU #0: pc=0x0000000000424d18pc=0x0000000000424d18npc=0x0000000000424d1c thread_id=19460
pc is printed twice, there is no space between pc, pc and npc.
With this patch, pc is not printed anymore when has_npc is set. In addition
the space is printed before pc/nip/npc/PC instead of after the colon so that
multiple prints are possible. This result on the following kind of input on
sparc targets:
| info cpus
| * CPU #0: pc=0x0000000000424d18 npc=0x0000000000424d1c thread_id=19460
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Peter Maydell [Fri, 19 Oct 2012 04:23:05 +0000 (04:23 +0000)]
target-arm: Remove out of date FIXME regarding saturating arithmetic
Remove an out of date FIXME regarding the saturating arithmetic helpers:
we now do pass a pointer to CPUARMState to these helpers, and since
the AREG0 changes went in there is no difference between helper.c
and op_helper.c and therefore no point in moving the functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 18 Oct 2012 16:40:41 +0000 (17:40 +0100)]
target-arm: Implement abs_i32 inline rather than as a helper
Implement abs_i32 inline (with movcond) rather than using a helper
function.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 18 Oct 2012 15:58:52 +0000 (16:58 +0100)]
target-arm: Use TCG operation for Neon 64 bit negation
Use the TCG operation to do Neon 64 bit negations rather than calling
a helper routine for it.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Sun, 14 Oct 2012 09:52:27 +0000 (09:52 +0000)]
arm-semi.c: Handle get/put_user() failure accessing arguments
Rework the handling of arguments to ARM semihosting calls so that we
handle a possible failure return from get_user_ual() or put_user_ual().
(This incidentally silences a lot of warnings from clang about
"expression result unused").
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Paolo Bonzini [Wed, 22 Aug 2012 14:43:07 +0000 (16:43 +0200)]
qmp: add NBD server commands
Adding an NBD server inside QEMU is trivial, since all the logic is
in nbd.c and can be shared easily between qemu-nbd and QEMU itself.
The main difference is that qemu-nbd serves a single unnamed export,
while QEMU serves named exports.
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 23 Aug 2012 09:20:36 +0000 (11:20 +0200)]
block: add close notifiers
The first user of close notifiers will be the embedded NBD server.
It would be possible to use them to do some of the ad hoc processing
(e.g. for block jobs and I/O limits) that is currently done by
bdrv_close.
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 19 Oct 2012 09:36:48 +0000 (11:36 +0200)]
block: prepare code for adding block notifiers
There is no reason in principle to skip job cancellation and draining
of pending I/O when there is no medium in the disk. Do these unconditionally,
which also prepares the code for the next patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 23 Oct 2012 19:31:53 +0000 (21:31 +0200)]
qemu-sockets: add socket_listen, socket_connect, socket_parse
These are QAPI-friendly versions of the qemu-sockets functions. They
support IP sockets, Unix sockets, and named file descriptors, using a
QAPI union to dispatch to the correct function.
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 23 Oct 2012 20:36:08 +0000 (22:36 +0200)]
tests: do not include tools-obj-y
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 19 Sep 2012 11:51:46 +0000 (13:51 +0200)]
qemu-sockets: return InetSocketAddress from inet_parse
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 19 Sep 2012 12:03:35 +0000 (14:03 +0200)]
qapi: add socket address types
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 19 Sep 2012 13:11:05 +0000 (15:11 +0200)]
build: add QAPI files to the tools
We need them because qemu-sockets will soon be using SocketAddress.
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avi Kivity [Tue, 23 Oct 2012 10:30:10 +0000 (12:30 +0200)]
Rename target_phys_addr_t to hwaddr
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific). Replace it with a finger-friendly,
standards conformant hwaddr.
Outstanding patchsets can be fixed up with the command
git rebase -i --exec 'find -name "*.[ch]"
| xargs s/target_phys_addr_t/hwaddr/g' origin
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Fri, 19 Oct 2012 09:34:18 +0000 (11:34 +0200)]
vnc: drop QERR_VNC_SERVER_FAILED
We now always return "nice" error messages in errp when we goto fail.
Drop the default error message.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 19 Sep 2012 11:54:39 +0000 (13:54 +0200)]
qemu-sockets: add error propagation to Unix socket functions
Before:
$ qemu-system-x86_64 -monitor unix:/vvv,server=off
connect(unix:/vvv): No such file or directory
chardev: opening backend "socket" failed
After:
$ x86_64-softmmu/qemu-system-x86_64 -monitor unix:/vvv,server=off
qemu-system-x86_64: -monitor unix:/vvv,server=off: Failed to connect to socket: No such file or directory
chardev: opening backend "socket" failed
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 19 Sep 2012 11:22:21 +0000 (13:22 +0200)]
qemu-sockets: add error propagation to inet_parse
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>