OSDN Git Service
Leif Lindholm [Tue, 19 Sep 2023 09:02:29 +0000 (10:02 +0100)]
hw/arm/sbsa-ref: use bsa.h for PPI definitions
Use the private peripheral interrupt definitions from bsa.h instead of
defining them locally. Refactor to use the INTIDs defined there instead
of the PPI# used previously.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id:
20230919090229.188092-4-quic_llindhol@quicinc.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Leif Lindholm [Tue, 19 Sep 2023 09:02:28 +0000 (10:02 +0100)]
include/hw/arm: move BSA definitions to bsa.h
virt.h defines a number of IRQs that are ultimately described by Arm's
Base System Architecture specification. Move these to a dedicated header
so that they can be reused by other platforms that do the same.
Include that header from virt.h to minimise churn.
While we're moving the definitions, sort them into numerical order,
and add the ARCH_TIMER_NS_EL2_VIRT_IRQ definition used by sbsa-ref
and which will eventually be needed by virt also.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id:
20230919090229.188092-3-quic_llindhol@quicinc.com
[PMM: Remove unused PPI_TO_INTID macro; sort numerically;
add ARCH_TIMER_NS_EL2_VIRT_IRQ]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Leif Lindholm [Tue, 19 Sep 2023 09:02:27 +0000 (10:02 +0100)]
{include/}hw/arm: refactor virt PPI logic
GIC Private Peripheral Interrupts (PPI) are defined as GIC INTID 16-31.
As in, PPI0 is INTID16 .. PPI15 is INTID31.
Arm's Base System Architecture specification (BSA) lists the mandated and
recommended private interrupt IDs by INTID, not by PPI index. But current
definitions in virt define them by PPI index, complicating cross
referencing.
Meanwhile, the PPI(x) macro counterintuitively adds 16 to the input value,
converting a PPI index to an INTID.
Resolve this by redefining the BSA-allocated PPIs by their INTIDs,
and replacing the PPI(x) macro with an INTID_TO_PPI(x) one where required.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id:
20230919090229.188092-2-quic_llindhol@quicinc.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Michal Orzel [Thu, 28 Sep 2023 09:44:04 +0000 (11:44 +0200)]
target/arm: Fix CNTPCT_EL0 trapping from EL0 when HCR_EL2.E2H is 0
On an attempt to access CNTPCT_EL0 from EL0 using a guest running on top
of Xen, a trap from EL2 was observed which is something not reproducible
on HW (also, Xen does not trap accesses to physical counter).
This is because gt_counter_access() checks for an incorrect bit (1
instead of 0) of CNTHCTL_EL2 if HCR_EL2.E2H is 0 and access is made to
physical counter. Refer ARM ARM DDI 0487J.a, D19.12.2:
When HCR_EL2.E2H is 0:
- EL1PCTEN, bit [0]: refers to physical counter
- EL1PCEN, bit [1]: refers to physical timer registers
Drop entire block "if (hcr & HCR_E2H) {...} else {...}" from EL0 case
and fall through to EL1 case, given that after fixing checking for the
correct bit, the handling is the same.
Fixes:
5bc8437136fb ("target/arm: Update timer access for VHE")
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Message-id:
20230928094404.20802-1-michal.orzel@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Viktor Prutyanov [Sat, 30 Sep 2023 23:53:17 +0000 (02:53 +0300)]
elf2dmp: check array bounds in pdb_get_file_size
Index in file_size array must be checked against num_files, because the
entries we are looking for may be absent in the PDB.
Fixes: Coverity CID
1521597
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20230930235317.11469-3-viktor@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Viktor Prutyanov [Sat, 30 Sep 2023 23:53:16 +0000 (02:53 +0300)]
elf2dmp: limit print length for sign_rsds
String sign_rsds isn't terminated, so the print length must be limited.
Fixes: Coverity CID
1521598
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id:
20230930235317.11469-2-viktor@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tong Ho [Tue, 3 Oct 2023 05:21:39 +0000 (22:21 -0700)]
xlnx-bbram: hw/nvram: Use dot in device type name
This replaces the comma (,) to dot (.) in the device type name
so the name can be used with the 'driver=' command line option.
Signed-off-by: Tong Ho <tong.ho@amd.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id:
20231003052139.199665-1-tong.ho@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tong Ho [Wed, 4 Oct 2023 05:53:39 +0000 (22:53 -0700)]
xlnx-versal-efuse: hw/nvram: Remove deprecated device reset
This change implements the ResettableClass interface for the device.
Signed-off-by: Tong Ho <tong.ho@amd.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id:
20231004055339.323833-1-tong.ho@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tong Ho [Wed, 4 Oct 2023 05:57:13 +0000 (22:57 -0700)]
xlnx-zynqmp-efuse: hw/nvram: Remove deprecated device reset
This change implements the ResettableClass interface for the device.
Signed-off-by: Tong Ho <tong.ho@amd.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id:
20231004055713.324009-1-tong.ho@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tong Ho [Tue, 3 Oct 2023 05:23:45 +0000 (22:23 -0700)]
xlnx-bbram: hw/nvram: Remove deprecated device reset
This change implements the ResettableClass interface for the device.
Signed-off-by: Tong Ho <tong.ho@amd.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20231003052345.199725-1-tong.ho@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Fri, 13 Oct 2023 13:02:14 +0000 (15:02 +0200)]
hw/arm/exynos4210: Get arm_boot_info declaration from 'hw/arm/boot.h'
struct arm_boot_info is declared in "hw/arm/boot.h".
By including the correct header we don't need to declare
it again in "target/arm/cpu-qom.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20231013130214.95742-1-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Thomas Huth [Thu, 12 Oct 2023 07:34:58 +0000 (09:34 +0200)]
hw/arm: Move raspberrypi-fw-defs.h to the include/hw/arm/ folder
The file is obviously related to the raspberrypi machine, so
it should reside in hw/arm/ instead of hw/misc/. And while we're
at it, also adjust the wildcard in MAINTAINERS so that it covers
this file, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20231012073458.860187-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stefan Hajnoczi [Wed, 18 Oct 2023 10:21:15 +0000 (06:21 -0400)]
Merge tag 'pull-vfio-
20231018' of https://github.com/legoater/qemu into staging
vfio queue:
* Support for VFIODisplay migration with ramfb
* Preliminary work for IOMMUFD support
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmUvlEYACgkQUaNDx8/7
# 7KFlaw//X2053de2eTdo38/UMSzi5ACWWn2j1iGQZf/3+J2LcdlixZarZr/2DN56
# 4axmwF6+GKozt5+EnvWtgodDn6U9iyMNaAB3CGBHFHsH8uqKeZd/Ii754q4Rcmy9
# ZufBOPWm9Ff7s2MMFiAZvso75jP2wuwVEe1YPRjeJnsNSNIJ6WZfemh3Sl96yRBb
# r38uqzqetKwl7HziMMWP3yb8v+dU8A9bqI1hf1FZGttfFz3XA+pmjXKA6XxdfiZF
# AAotu5x9w86a08sAlr/qVsZFLR37oQykkXM0D840DafJDyr5fbJiq8cwfOjMw9+D
# w6+udRm5KoBWPsvb/T3dR88GRMO22PChjH9Vjl51TstMNhdTxuKJTKhhSoUFZbXV
# 8CMjwfALk5ggIOyCk1LRd04ed+9qkqgcbw1Guy5pYnyPnY/X6XurxxaxS6Gemgtn
# UvgRYhSjio+LgHLO77IVkWJMooTEPzUTty2Zxa7ldbbE+utPUtsmac9+1m2pnpqk
# 5VQmB074QnsJuvf+7HPU6vYCzQWoXHsH1UY/A0fF7MPedNUAbVYzKrdGPyqEMqHy
# xbilAIaS3oO0pMT6kUpRv5c5vjbwkx94Nf/ii8fQVjWzPfCcaF3yEfaam62jMUku
# stySaRpavKIx2oYLlucBqeKaBGaUofk13gGTQlsFs8pKCOAV7r4=
# =s0fN
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 18 Oct 2023 04:16:06 EDT
# gpg: using RSA key
A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [unknown]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-
20231018' of https://github.com/legoater/qemu: (22 commits)
hw/vfio: add ramfb migration support
ramfb-standalone: add migration support
ramfb: add migration support
vfio/pci: Remove vfio_detach_device from vfio_realize error path
vfio/ccw: Remove redundant definition of TYPE_VFIO_CCW
vfio/ap: Remove pointless apdev variable
vfio/pci: Fix a potential memory leak in vfio_listener_region_add
vfio/common: Move legacy VFIO backend code into separate container.c
vfio/common: Introduce a global VFIODevice list
vfio/common: Store the parent container in VFIODevice
vfio/common: Introduce a per container device list
vfio/common: Move VFIO reset handler registration to a group agnostic function
vfio/ccw: Use vfio_[attach/detach]_device
vfio/ap: Use vfio_[attach/detach]_device
vfio/platform: Use vfio_[attach/detach]_device
vfio/pci: Introduce vfio_[attach/detach]_device
vfio/common: Extract out vfio_kvm_device_[add/del]_fd
vfio/common: Introduce vfio_container_add|del_section_window()
vfio/common: Propagate KVM_SET_DEVICE_ATTR error if any
vfio/common: Move IOMMU agnostic helpers to a separate file
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 18 Oct 2023 10:20:41 +0000 (06:20 -0400)]
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* build system and Python cleanups
* fix netbsd VM build
* allow non-relocatable installs
* allow using command line options to configure qemu-ga
* target/i386: check intercept for XSETBV
* target/i386: fix CPUID_HT exposure
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmUvkQQUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroM3pQgArXCsmnsjlng1chjCvKnIuVmaTYZ5
# aC9pcx7TlyM0+XWtTN0NQhFt71Te+3ioReXIQRvy5O68RNbEkiu8LXfOJhWAHbWk
# vZVtzHQuOZVizeZtUruKlDaw0nZ8bg+NI4aGLs6rs3WphEAM+tiLnZJ0BouiedKS
# e/COB/Hqjok+Ntksbfv5q7XpWjwQB0y2073vM1Mcf0ToOWFLFdL7x0SZ3hxyYlYl
# eoefp/8kbWeUWA7HuoOKmpiLIxmKnY7eXp+UCvdnEhnSce9sCxpn2nzqqLuPItTK
# V3GrJ2//+lrekPHyQvb8IjUMUrPOmzf8GadIE0tkfdHjEP72IsHk0VX81A==
# =rPte
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 18 Oct 2023 04:02:12 EDT
# gpg: using RSA key
F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (32 commits)
configure: define "pkg-config" in addition to "pkgconfig"
meson: add a note on why we use config_host for program paths
meson-buildoptions: document the data at the top
configure, meson: use command line options to configure qemu-ga
configure: unify handling of several Debian cross containers
configure: move environment-specific defaults to config-meson.cross
configure: move target-specific defaults to an external machine file
configure: remove some dead cruft
configure: clean up PIE option handling
configure: clean up plugin option handling
configure, tests/tcg: simplify GDB conditionals
tests/tcg/arm: move non-SVE tests out of conditional
hw/remote: move stub vfu_object_set_bus_irq out of stubs/
hw/xen: cleanup sourcesets
configure: clean up handling of CFI option
meson, cutils: allow non-relocatable installs
meson: do not use set10
meson: do not build shaders by default
tracetool: avoid invalid escape in Python string
tests/vm: avoid invalid escape in Python string
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Marc-André Lureau [Mon, 9 Oct 2023 06:32:47 +0000 (10:32 +0400)]
hw/vfio: add ramfb migration support
Add a "VFIODisplay" subsection whenever "x-ramfb-migrate" is turned on.
Turn it off by default on machines <= 8.1 for compatibility reasons.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
[ clg: - checkpatch fixes
- improved warn_report() in vfio_realize() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Marc-André Lureau [Mon, 9 Oct 2023 06:32:46 +0000 (10:32 +0400)]
ramfb-standalone: add migration support
Add a "ramfb-dev" section whenever "x-migrate" is turned on. Turn it off
by default on machines <= 8.1 for compatibility reasons.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Marc-André Lureau [Mon, 9 Oct 2023 06:32:45 +0000 (10:32 +0400)]
ramfb: add migration support
Implementing RAMFB migration is quite straightforward. One caveat is to
treat the whole RAMFBCfg as a blob, since that's what is exposed to the
guest directly. This avoid having to fiddle with endianness issues if we
were to migrate fields individually as integers.
The devices using RAMFB will have to include ramfb_vmstate in their
migration description.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Eric Auger [Wed, 11 Oct 2023 20:09:34 +0000 (22:09 +0200)]
vfio/pci: Remove vfio_detach_device from vfio_realize error path
In vfio_realize, on the error path, we currently call
vfio_detach_device() after a successful vfio_attach_device.
While this looks natural, vfio_instance_finalize also induces
a vfio_detach_device(), and it seems to be the right place
instead as other resources are released there which happen
to be a prerequisite to a successful UNSET_CONTAINER.
So let's rely on the finalize vfio_detach_device call to free
all the relevant resources.
Fixes:
a28e06621170 ("vfio/pci: Introduce vfio_[attach/detach]_device")
Reported-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Zhenzhong Duan [Mon, 9 Oct 2023 02:20:48 +0000 (10:20 +0800)]
vfio/ccw: Remove redundant definition of TYPE_VFIO_CCW
No functional changes.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Zhenzhong Duan [Mon, 9 Oct 2023 02:20:47 +0000 (10:20 +0800)]
vfio/ap: Remove pointless apdev variable
No need to double-cast, call VFIO_AP_DEVICE() on DeviceState.
No functional changes.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Zhenzhong Duan [Mon, 9 Oct 2023 02:20:46 +0000 (10:20 +0800)]
vfio/pci: Fix a potential memory leak in vfio_listener_region_add
When there is an failure in vfio_listener_region_add() and the section
belongs to a ram device, there is an inaccurate error report which should
never be related to vfio_dma_map failure. The memory holding err is also
incrementally leaked in each failure.
Fix it by reporting the real error and free it.
Fixes:
567b5b309ab ("vfio/pci: Relax DMA map errors for MMIO regions")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Yi Liu [Mon, 9 Oct 2023 09:09:17 +0000 (11:09 +0200)]
vfio/common: Move legacy VFIO backend code into separate container.c
Move all the code really dependent on the legacy VFIO container/group
into a separate file: container.c. What does remain in common.c is
the code related to VFIOAddressSpace, MemoryListeners, migration and
all other general operations.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Zhenzhong Duan [Mon, 9 Oct 2023 09:09:16 +0000 (11:09 +0200)]
vfio/common: Introduce a global VFIODevice list
Some functions iterate over all the VFIODevices. This is currently
achieved by iterating over all groups/devices. Let's
introduce a global list of VFIODevices simplifying that scan.
This will also be useful while migrating to IOMMUFD by hiding the
group specificity.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Zhenzhong Duan [Mon, 9 Oct 2023 09:09:15 +0000 (11:09 +0200)]
vfio/common: Store the parent container in VFIODevice
let's store the parent contaienr within the VFIODevice.
This simplifies the logic in vfio_viommu_preset() and
brings the benefice to hide the group specificity which
is useful for IOMMUFD migration.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Zhenzhong Duan [Mon, 9 Oct 2023 09:09:14 +0000 (11:09 +0200)]
vfio/common: Introduce a per container device list
Several functions need to iterate over the VFIO devices attached to
a given container. This is currently achieved by iterating over the
groups attached to the container and then over the devices in the group.
Let's introduce a per container device list that simplifies this
search.
Per container list is used in below functions:
vfio_devices_all_dirty_tracking
vfio_devices_all_device_dirty_tracking
vfio_devices_all_running_and_mig_active
vfio_devices_dma_logging_stop
vfio_devices_dma_logging_start
vfio_devices_query_dirty_bitmap
This will also ease the migration of IOMMUFD by hiding the group
specificity.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Zhenzhong Duan [Mon, 9 Oct 2023 09:09:13 +0000 (11:09 +0200)]
vfio/common: Move VFIO reset handler registration to a group agnostic function
Move the reset handler registration/unregistration to a place that is not
group specific. vfio_[get/put]_address_space are the best places for that
purpose.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Eric Auger [Mon, 9 Oct 2023 09:09:12 +0000 (11:09 +0200)]
vfio/ccw: Use vfio_[attach/detach]_device
Let the vfio-ccw device use vfio_attach_device() and
vfio_detach_device(), hence hiding the details of the used
IOMMU backend.
Note that the migration reduces the following trace
"vfio: subchannel %s has already been attached" (featuring
cssid.ssid.devid) into "device is already attached"
Also now all the devices have been migrated to use the new
vfio_attach_device/vfio_detach_device API, let's turn the
legacy functions into static functions, local to container.c.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Eric Auger [Mon, 9 Oct 2023 09:09:11 +0000 (11:09 +0200)]
vfio/ap: Use vfio_[attach/detach]_device
Let the vfio-ap device use vfio_attach_device() and
vfio_detach_device(), hence hiding the details of the used
IOMMU backend.
We take the opportunity to use g_path_get_basename() which
is prefered, as suggested by
3e015d815b ("use g_path_get_basename instead of basename")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Eric Auger [Mon, 9 Oct 2023 09:09:10 +0000 (11:09 +0200)]
vfio/platform: Use vfio_[attach/detach]_device
Let the vfio-platform device use vfio_attach_device() and
vfio_detach_device(), hence hiding the details of the used
IOMMU backend.
Drop the trace event for vfio-platform as we have similar
one in vfio_attach_device.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Eric Auger [Mon, 9 Oct 2023 09:09:09 +0000 (11:09 +0200)]
vfio/pci: Introduce vfio_[attach/detach]_device
We want the VFIO devices to be able to use two different
IOMMU backends, the legacy VFIO one and the new iommufd one.
Introduce vfio_[attach/detach]_device which aim at hiding the
underlying IOMMU backend (IOCTLs, datatypes, ...).
Once vfio_attach_device completes, the device is attached
to a security context and its fd can be used. Conversely
When vfio_detach_device completes, the device has been
detached from the security context.
At the moment only the implementation based on the legacy
container/group exists. Let's use it from the vfio-pci device.
Subsequent patches will handle other devices.
We also take benefit of this patch to properly free
vbasedev->name on failure.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Zhenzhong Duan [Mon, 9 Oct 2023 09:09:08 +0000 (11:09 +0200)]
vfio/common: Extract out vfio_kvm_device_[add/del]_fd
Introduce two new helpers, vfio_kvm_device_[add/del]_fd
which take as input a file descriptor which can be either a group fd or
a cdev fd. This uses the new KVM_DEV_VFIO_FILE VFIO KVM device group,
which aliases to the legacy KVM_DEV_VFIO_GROUP.
vfio_kvm_device_[add/del]_group then call those new helpers.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Eric Auger [Mon, 9 Oct 2023 09:09:07 +0000 (11:09 +0200)]
vfio/common: Introduce vfio_container_add|del_section_window()
Introduce helper functions that isolate the code used for
VFIO_SPAPR_TCE_v2_IOMMU.
Those helpers hide implementation details beneath the container object
and make the vfio_listener_region_add/del() implementations more
readable. No code change intended.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Eric Auger [Mon, 9 Oct 2023 09:09:06 +0000 (11:09 +0200)]
vfio/common: Propagate KVM_SET_DEVICE_ATTR error if any
In the VFIO_SPAPR_TCE_v2_IOMMU container case, when
KVM_SET_DEVICE_ATTR fails, we currently don't propagate the
error as we do on the vfio_spapr_create_window() failure
case. Let's align the code. Take the opportunity to
reword the error message and make it more explicit.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Yi Liu [Mon, 9 Oct 2023 09:09:05 +0000 (11:09 +0200)]
vfio/common: Move IOMMU agnostic helpers to a separate file
Move low-level iommu agnostic helpers to a separate helpers.c
file. They relate to regions, interrupts, device/region
capabilities and etc.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Zhenzhong Duan [Mon, 9 Oct 2023 09:09:04 +0000 (11:09 +0200)]
linux-headers: Add iommufd.h
Since commit
da3c22c74a3c ("linux-headers: Update to Linux v6.6-rc1"),
linux-headers has been updated to v6.6-rc1.
As previous patch added iommufd.h to update-linux-headers.sh,
run the script again against TAG v6.6-rc1 to have iommufd.h included.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Eric Auger [Mon, 9 Oct 2023 09:09:03 +0000 (11:09 +0200)]
scripts/update-linux-headers: Add iommufd.h
Update the script to import iommufd.h
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Paolo Bonzini [Tue, 17 Oct 2023 15:32:50 +0000 (17:32 +0200)]
configure: define "pkg-config" in addition to "pkgconfig"
Meson used to allow both "pkgconfig" and "pkg-config" entries in machine
files; the former was used for dependency lookup and the latter
was used as return value for "find_program('pkg-config')", which is a less
common use-case and one that QEMU does not need.
This inconsistency is going to be fixed by Meson 1.3, which will deprecate
"pkgconfig" in favor of "pkg-config" (the less common one, but it makes
sense because it matches the name of the binary). For backward
compatibility it is still allowed to define both, so do that in the
configure-generated machine file.
Related: https://github.com/mesonbuild/meson/pull/12385
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 28 Sep 2023 10:00:48 +0000 (12:00 +0200)]
meson: add a note on why we use config_host for program paths
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 28 Sep 2023 09:20:01 +0000 (11:20 +0200)]
meson-buildoptions: document the data at the top
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 9 Oct 2023 12:13:59 +0000 (14:13 +0200)]
configure, meson: use command line options to configure qemu-ga
Preserve the functionality of the environment variables, but
allow using the command line instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 9 Oct 2023 12:03:56 +0000 (14:03 +0200)]
configure: unify handling of several Debian cross containers
The Debian and GNU architecture names match very often, even though
there are common cases (32-bit Arm or 64-bit x86) where they do not
and other cases in which the GNU triplet is actually a quadruplet.
But it is still possible to group the common case into a single
case inside probe_target_compiler.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 16 Oct 2023 06:20:13 +0000 (08:20 +0200)]
configure: move environment-specific defaults to config-meson.cross
Store the -Werror and SMBD defaults in the machine file, which still allows
them to be overridden on the command line and enables automatic parsing
of the related options.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 16 Oct 2023 06:18:08 +0000 (08:18 +0200)]
configure: move target-specific defaults to an external machine file
Enable Windows-specific defaults with a machine file, so that related
options can be automatically parsed and included in the help message.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 28 Sep 2023 10:07:23 +0000 (12:07 +0200)]
configure: remove some dead cruft
print_error is only invoked in one place, and $git is unused.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 28 Sep 2023 08:41:29 +0000 (10:41 +0200)]
configure: clean up PIE option handling
Keep together all the conditions that lead to disabling PIE.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 18 Sep 2023 09:06:48 +0000 (11:06 +0200)]
configure: clean up plugin option handling
Keep together all the conditions that lead to disabling plugins, and
remove now-dead code.
Since the option was not in SKIP_OPTIONS, it was present twice in
the help message, both from configure and from meson-buildoptions.sh.
Remove the duplication and take the occasion to document the option as
autodetected, which it is.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 28 Sep 2023 08:44:56 +0000 (10:44 +0200)]
configure, tests/tcg: simplify GDB conditionals
Unify HAVE_GDB_BIN (currently in config-host.mak) and
HOST_GDB_SUPPORTS_ARCH into a single GDB variable in
config-target.mak.
Reviewed-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 28 Sep 2023 08:27:24 +0000 (10:27 +0200)]
tests/tcg/arm: move non-SVE tests out of conditional
test-aes, sha1-vector and sha512-vector need not be conditional on
$(CROSS_CC_HAS_SVE), reorganize the "if"s to move them outside.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 31 Aug 2023 08:58:23 +0000 (10:58 +0200)]
hw/remote: move stub vfu_object_set_bus_irq out of stubs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 31 Aug 2023 09:14:18 +0000 (11:14 +0200)]
hw/xen: cleanup sourcesets
xen_ss is added unconditionally to arm_ss and i386_ss (the only
targets that can have CONFIG_XEN enabled) and its contents are gated by
CONFIG_XEN; xen_specific_ss has no condition for its constituent files
but is gated on CONFIG_XEN when its added to specific_ss.
So xen_ss is a duplicate of xen_specific_ss, though defined in a
different way. Merge the two by eliminating xen_ss.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 26 Sep 2023 15:20:53 +0000 (17:20 +0200)]
configure: clean up handling of CFI option
Avoid that --enable-cfi --disable-cfi leaves b_lto set to true.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 5 Oct 2023 12:19:34 +0000 (14:19 +0200)]
meson, cutils: allow non-relocatable installs
Say QEMU is configured with bindir = "/usr/bin" and a firmware path
that starts with "/usr/share/qemu". Ever since QEMU 5.2, QEMU's
install has been relocatable: if you move qemu-system-x86_64 from
/usr/bin to /home/username/bin, it will start looking for firmware in
/home/username/share/qemu. Previously, you would get a non-relocatable
install where the moved QEMU will keep looking for firmware in
/usr/share/qemu.
Windows almost always wants relocatable installs, and in fact that
is why QEMU 5.2 introduced relocatability in the first place.
However, newfangled distribution mechanisms such as AppImage
(https://docs.appimage.org/reference/best-practices.html), and
possibly NixOS, also dislike using at runtime the absolute paths
that were established at build time.
On POSIX systems you almost never care; if you do, your usecase
dictates which one is desirable, so there's no single answer.
Obviously relocatability works fine most of the time, because not many
people have complained about QEMU's switch to relocatable install,
and that's why until now there was no way to disable relocatability.
But a non-relocatable, non-modular binary can help if you want to do
experiments with old firmware and new QEMU or vice versa (because you
can just upgrade/downgrade the firmware package, and use rpm2cpio or
similar to extract the QEMU binaries outside /usr), so allow both.
This patch allows one to build a non-relocatable install using a new
option to configure. Why? Because it's not too hard, and because
it helps the user double check the relocatability of their install.
Note that the same code that handles relocation also lets you run QEMU
from the build tree and pick e.g. firmware files from the source tree
transparently. Therefore that part remains active with this patch,
even if you configure with --disable-relocatable.
Suggested-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stefan Hajnoczi [Tue, 17 Oct 2023 14:06:20 +0000 (10:06 -0400)]
Merge tag 'migration-
20231017-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request (
20231017)
Hi
Same that yesterday one, except:
- rebased to latest (clean rebase)
- fixed 64 bits read on big endian host
CI: https://gitlab.com/juan.quintela/qemu/-/pipelines/
1039214198
Please, apply.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmUuReUACgkQ9IfvGFhy
# 1yO+FQ/+Nx2botbrUVJb3vLeG6f+x5xeWJjB0boOqhk7227cKmAA33Oqwx5l4UtL
# oLOHA6P4ThqacpaluGOMMp44BSr/jOMDC/HUDVJtSplTD+droPiklIIGUfYScLbA
# oYx6lXfSB2jMpSuSU19STbjwBRvd4bjJix3zDGwEIgXYqYt0tY0FY/nnGTmImnM1
# KDjRerf1lg4Rt0vvwg7I0onIDvh3CKX26Sj5a3wSRaLoocUe3jpsuBNH7MMqroHs
# WpocBIsLiBAf/CbeLZsQlhbVeOi1R+kSAR5hDPvvJCPWHIrd2wf8+3NXjcFepb7d
# M4wE2jLjCvHhzwYwSc0ir4n74jwD22IirEPQs8ONHrjLCb5VoBKYV5bqsFUHF55N
# SbFvcZIzJFiOm2anEWiiqiNTLtYAdQCKtUvbyJ7Mq4ck6icIInLdX9zrm4voofYJ
# 02lX/IIGlT3C3dGSz09LBoJ6E82zmQWNHmov8A90+3RYvMF9uSpxi0z40lhj6jWC
# 6Q2AHxrJJ040ZboeOfJQG78BtvZ/9PQ2ORhJ3ceRDND4kSTDtfe/TSNAZ3thM33y
# Sv99o+F/HaqrKnxK8eTJrvIEWxojDu3lnqJERWAm2AOxTnQ+6mgGtsCfLEdrv5D1
# xVsY2QczB1quRjaU2ml/7Cxe4Q1urTtfl82IEXGded6UL+cmF/I=
# =br93
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 17 Oct 2023 04:29:25 EDT
# gpg: using RSA key
1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-
20231017-pull-request' of https://gitlab.com/juan.quintela/qemu: (38 commits)
migration/multifd: Clarify Error usage in multifd_channel_connect
migration/multifd: Unify multifd_send_thread error paths
migration/multifd: Remove direct "socket" references
migration/ram: Merge save_zero_page functions
migration/ram: Move xbzrle zero page handling into save_zero_page
migration/ram: Stop passing QEMUFile around in save_zero_page
migration/ram: Remove RAMState from xbzrle_cache_zero_page
migration/ram: Refactor precopy ram loading code
multifd: reset next_packet_len after sending pages
multifd: fix counters in multifd_send_thread
migration: check for rate_limit_max for RATE_LIMIT_DISABLED
migration: Improve json and formatting
migration/rdma: Remove all "ret" variables that are used only once
migration/rdma: Declare for index variables local
migration/rdma: Use i as for index instead of idx
migration/rdma: Check sooner if we are in postcopy for save_page()
migration/rdma: Remove qemu_ prefix from exported functions
migration/rdma: Move rdma constants from qemu-file.h to rdma.h
qemu-file: Remove QEMUFileHooks
migration/rdma: Create rdma_control_save_page()
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Tue, 17 Oct 2023 14:05:51 +0000 (10:05 -0400)]
Merge tag 'gpu-pull-request' of https://gitlab.com/marcandre.lureau/qemu into staging
virtio-gpu rutabaga support
# -----BEGIN PGP SIGNATURE-----
#
# iQJQBAABCAA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAmUtP5YcHG1hcmNhbmRy
# ZS5sdXJlYXVAcmVkaGF0LmNvbQAKCRDa6OEJdZac5X9CD/4s1n/GZyDr9bh04V03
# otAqtq2CSyuUOviqBrqxYgraCosUD1AuX8WkDy5cCPtnKC4FxRjgVlm9s7K/yxOW
# xZ78e4oVgB1F3voOq6LgtKK6BRG/BPqNzq9kuGcayCHQbSxg7zZVwa702Y18r2ZD
# pjOhbZCrJTSfASL7C3e/rm7798Wk/hzSrClGR56fbRAVgQ6Lww2L97/g0nHyDsWK
# DrCBrdqFtKjpLeUHmcqqS4AwdpG2SyCgqE7RehH/wOhvGTxh/JQvHbLGWK2mDC3j
# Qvs8mClC5bUlyNQuUz7lZtXYpzCW6VGMWlz8bIu+ncgSt6RK1TRbdEfDJPGoS4w9
# ZCGgcTxTG/6BEO76J/VpydfTWDo1FwQCQ0Vv7EussGoRTLrFC3ZRFgDWpqCw85yi
# AjPtc0C49FHBZhK0l1CoJGV4gGTDtD9jTYN0ffsd+aQesOjcsgivAWBaCOOQWUc8
# KOv9sr4kLLxcnuCnP7p/PuVRQD4eg0TmpdS8bXfnCzLSH8fCm+n76LuJEpGxEBey
# 3KPJPj/1BNBgVgew+znSLD/EYM6YhdK2gF5SNrYsdR6UcFdrPED/xmdhzFBeVym/
# xbBWqicDw4HLn5YrJ4tzqXje5XUz5pmJoT5zrRMXTHiu4pjBkEXO/lOdAoFwSy8M
# WNOtmSyB69uCrbyLw6xE2/YX8Q==
# =5a/Z
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 16 Oct 2023 09:50:14 EDT
# gpg: using RSA key
87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* tag 'gpu-pull-request' of https://gitlab.com/marcandre.lureau/qemu:
docs/system: add basic virtio-gpu documentation
gfxstream + rutabaga: enable rutabaga
gfxstream + rutabaga: meson support
gfxstream + rutabaga: add initial support for gfxstream
gfxstream + rutabaga prep: added need defintions, fields, and options
virtio-gpu: blob prep
virtio-gpu: hostmem
virtio-gpu: CONTEXT_INIT feature
virtio: Add shared memory capability
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Paolo Bonzini [Thu, 5 Oct 2023 12:31:27 +0000 (14:31 +0200)]
meson: do not use set10
Make all items of config-host.h consistent. To keep the --disable-coroutine-pool
code visible to the compiler, mutuate the IS_ENABLED() macro from Linux.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 11 Oct 2023 13:53:01 +0000 (15:53 +0200)]
meson: do not build shaders by default
They are not needed when building user-mode emulators.
Reviewed-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 16 Oct 2023 06:22:56 +0000 (08:22 +0200)]
tracetool: avoid invalid escape in Python string
This is an error in Python 3.12; fix it by using a raw string literal.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 16 Oct 2023 06:22:56 +0000 (08:22 +0200)]
tests/vm: avoid invalid escape in Python string
This is an error in Python 3.12; fix it by using a raw string literal
or by double-escaping the backslash.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 16 Oct 2023 06:22:56 +0000 (08:22 +0200)]
tests/avocado: avoid invalid escape in Python string
This is an error in Python 3.12; fix it by using a raw string literal.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 16 Oct 2023 06:22:56 +0000 (08:22 +0200)]
target/hexagon: avoid invalid escape in Python string
This is an error in Python 3.12; fix it by using a raw string literal.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 16 Oct 2023 06:22:56 +0000 (08:22 +0200)]
docs/sphinx: avoid invalid escape in Python string
This is an error in Python 3.12; fix it by using a raw string literal.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 16 Oct 2023 06:22:56 +0000 (08:22 +0200)]
tests/docker: avoid invalid escape in Python string
This is an error in Python 3.12; fix it by using a raw string literal.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Emmanouil Pitsidianakis [Fri, 13 Oct 2023 09:16:28 +0000 (12:16 +0300)]
scripts/get_maintainer.pl: don't print parentheses
When called from git-send-email, some results contain unclosed
parentheses from the subsystem title, for example:
(cc-cmd) Adding cc: qemu-ppc@nongnu.org (open list:PowerNV (Non-Virt...) from: 'scripts/get_maintainer.pl --nogit-fallback'
(cc-cmd) Adding cc: qemu-devel@nongnu.org (open list:All patches CC here) from: 'scripts/get_maintainer.pl --nogit-fallback'
Unmatched () '(open list:PowerNV (Non-Virt...)' '' at /usr/lib/git-core/git-send-email line 642.
error: unable to extract a valid address from: qemu-ppc@nongnu.org (open list:PowerNV (Non-Virt...)
What to do with this address? ([q]uit|[d]rop|[e]dit): d
This commit removes all parentheses from results.
Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <
20231013091628.669415-1-manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Thomas Huth [Mon, 16 Oct 2023 09:49:17 +0000 (11:49 +0200)]
scripts: Mark feature_to_c.py as non-executable to fix a build issue
Meson tries to run scripts via the shebang line if they files are
marked as executable. If "python3" is not in the $PATH, or if it
is a version that is too old, then the script execution fails.
We should make sure to run scripts via the python3 interpreter
that is used for Meson itself. For this, the files need to be marked
as non-executable, then meson will use the python3 binary that has
been used to run itself.
Fixes:
956af7daad ("gdbstub: Introduce GDBFeature structure")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <
20231016094917.19044-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 13 Oct 2023 15:28:32 +0000 (17:28 +0200)]
tests/vm: netbsd: install dtc
Install dtc as it is now a mandatory external dependency in order to build QEMU.
Co-developed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 13 Oct 2023 07:27:02 +0000 (09:27 +0200)]
target/i386: check intercept for XSETBV
Note that this intercept is special; it is checked before the #GP
exception.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Xiaoyao Li [Tue, 10 Oct 2023 06:05:39 +0000 (02:05 -0400)]
target/i386/cpu: Fix CPUID_HT exposure
When explicitly booting a multiple vcpus vm with "-cpu +ht", it gets
warning of
warning: host doesn't support requested feature: CPUID.01H:EDX.ht [bit 28]
Make CPUID_HT as supported unconditionally can resolve the warning.
However it introduces another issue that it also expose CPUID_HT to
guest when "-cpu host/max" with only 1 vcpu. To fix this, need mark
CPUID_HT as the no_autoenable_flags.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <
20231010060539.210258-1-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Yonggang Luo [Mon, 9 Oct 2023 16:51:13 +0000 (00:51 +0800)]
Revert "configure: Add workaround for ccache and clang"
This reverts commit
fd0e60530f10078f488fa3e9591cc7db5732989c.
According to https://peter.eisentraut.org/blog/2014/12/01/ccache-and-clang-part-3
it's already fixed in new version of ccache
According to https://ccache.dev/manual/4.8.html#config_run_second_cpp
CCACHE_CPP2 are default to true for new version ccache
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-ID: <
20231009165113.498-1-luoyonggang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
John Snow [Wed, 21 Jun 2023 00:21:19 +0000 (20:21 -0400)]
iotests: use the correct python to run linters
Whichever python is used to run iotest 297 should be the one used to
actually run the linters.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <
20230621002121.
1609612-5-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
John Snow [Wed, 21 Jun 2023 00:21:18 +0000 (20:21 -0400)]
iotests: get rid of '..' in path environment output
Resolve the build_root before we append more items onto it so that the
environment output is more concise with less parent directory confetti
in it.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <
20230621002121.
1609612-4-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fabiano Rosas [Thu, 12 Oct 2023 13:43:43 +0000 (10:43 -0300)]
migration/multifd: Clarify Error usage in multifd_channel_connect
The function is currently called from two sites, one always gives it a
NULL Error and the other always gives it a non-NULL Error.
In the non-NULL case, all it does it trace the error and return. One
of the callers already have tracing, add a tracepoint to the other and
stop passing the error into the function.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231012134343.23757-4-farosas@suse.de>
Fabiano Rosas [Thu, 12 Oct 2023 13:43:42 +0000 (10:43 -0300)]
migration/multifd: Unify multifd_send_thread error paths
The preferred usage of the Error type is to always set both the return
code and the error when a failure happens. As all code called from the
send thread follows this pattern, we'll always have the return code
and the error set at the same time.
Aside from the convention, in this piece of code this must be the
case, otherwise the if (ret != 0) would be exiting the thread without
calling multifd_send_terminate_threads() which is incorrect.
Unify both paths to make it clear that both are taken when there's an
error.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231012134343.23757-3-farosas@suse.de>
Fabiano Rosas [Thu, 12 Oct 2023 13:43:41 +0000 (10:43 -0300)]
migration/multifd: Remove direct "socket" references
We're about to enable support for other transports in multifd, so
remove direct references to sockets.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231012134343.23757-2-farosas@suse.de>
Fabiano Rosas [Wed, 11 Oct 2023 18:46:03 +0000 (15:46 -0300)]
migration/ram: Merge save_zero_page functions
We don't need to do this in two pieces. One single function makes it
easier to grasp, specially since it removes the indirection on the
return value handling.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231011184604.32364-7-farosas@suse.de>
Fabiano Rosas [Wed, 11 Oct 2023 18:46:02 +0000 (15:46 -0300)]
migration/ram: Move xbzrle zero page handling into save_zero_page
It makes a bit more sense to have the zero page handling of xbzrle
right where we save the zero page.
Also invert the exit condition to remove one level of indentation
which makes the next patch easier to grasp.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231011184604.32364-6-farosas@suse.de>
Fabiano Rosas [Wed, 11 Oct 2023 18:46:01 +0000 (15:46 -0300)]
migration/ram: Stop passing QEMUFile around in save_zero_page
We don't need the QEMUFile when we're already passing the
PageSearchStatus.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231011184604.32364-5-farosas@suse.de>
Fabiano Rosas [Wed, 11 Oct 2023 18:46:00 +0000 (15:46 -0300)]
migration/ram: Remove RAMState from xbzrle_cache_zero_page
'rs' is not used in that function. It's a leftover from commit
9360447d34 ("ram: Use MigrationStats for statistics").
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231011184604.32364-4-farosas@suse.de>
Nikolay Borisov [Wed, 11 Oct 2023 18:45:59 +0000 (15:45 -0300)]
migration/ram: Refactor precopy ram loading code
Extract the ramblock parsing code into a routine that operates on the
sequence of headers from the stream and another the parses the
individual ramblock. This makes ram_load_precopy() easier to
comprehend.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231011184604.32364-3-farosas@suse.de>
Elena Ufimtseva [Wed, 11 Oct 2023 18:43:58 +0000 (11:43 -0700)]
multifd: reset next_packet_len after sending pages
Sometimes multifd sends just sync packet with no pages
(normal_num is 0). In this case the old value is being
preserved and being accounted for while only packet_len
is being transferred.
Reset it to 0 after sending and accounting for.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231011184358.97349-5-elena.ufimtseva@oracle.com>
Elena Ufimtseva [Wed, 11 Oct 2023 18:43:57 +0000 (11:43 -0700)]
multifd: fix counters in multifd_send_thread
Previous commit
cbec7eb76879d419e7dbf531ee2506ec0722e825
"migration/multifd: Compute transferred bytes correctly"
removed accounting for packet_len in non-rdma
case, but the next_packet_size only accounts for pages, not for
the header packet (normal_pages * PAGE_SIZE) that is being sent
as iov[0]. The packet_len part should be added to account for
the size of MultiFDPacket and the array of the offsets.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231011184358.97349-4-elena.ufimtseva@oracle.com>
Elena Ufimtseva [Wed, 11 Oct 2023 18:43:55 +0000 (11:43 -0700)]
migration: check for rate_limit_max for RATE_LIMIT_DISABLED
In migration rate limiting atomic operations are used
to read the rate limit variables and transferred bytes and
they are expensive. Check first if rate_limit_max is equal
to RATE_LIMIT_DISABLED and return false immediately if so.
Note that with this patch we will also will stop flushing
by not calling qemu_fflush() from migration_transferred_bytes()
if the migration rate is not exceeded.
This should be fine since migration thread calls in the loop
migration_update_counters from migration_rate_limit() that
calls the migration_transferred_bytes() and flushes there.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231011184358.97349-2-elena.ufimtseva@oracle.com>
Juan Quintela [Fri, 13 Oct 2023 10:47:27 +0000 (12:47 +0200)]
migration: Improve json and formatting
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231013104736.31722-2-quintela@redhat.com>
Juan Quintela [Wed, 11 Oct 2023 20:35:27 +0000 (22:35 +0200)]
migration/rdma: Remove all "ret" variables that are used only once
Change code that is:
int ret;
...
ret = foo();
if (ret[ < 0]?) {
to:
if (foo()[ < 0]) {
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231011203527.9061-14-quintela@redhat.com>
Juan Quintela [Wed, 11 Oct 2023 20:35:26 +0000 (22:35 +0200)]
migration/rdma: Declare for index variables local
Declare all variables that are only used inside a for loop inside the
for statement.
This makes clear that they are not used outside of the for loop.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231011203527.9061-13-quintela@redhat.com>
Juan Quintela [Wed, 11 Oct 2023 20:35:25 +0000 (22:35 +0200)]
migration/rdma: Use i as for index instead of idx
Once there, all the uses are local to the for, so declare the variable
inside the for statement.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231011203527.9061-12-quintela@redhat.com>
Juan Quintela [Wed, 11 Oct 2023 20:35:24 +0000 (22:35 +0200)]
migration/rdma: Check sooner if we are in postcopy for save_page()
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231011203527.9061-11-quintela@redhat.com>
Juan Quintela [Wed, 11 Oct 2023 20:35:23 +0000 (22:35 +0200)]
migration/rdma: Remove qemu_ prefix from exported functions
Functions are long enough even without this.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231011203527.9061-10-quintela@redhat.com>
Juan Quintela [Wed, 11 Oct 2023 20:35:22 +0000 (22:35 +0200)]
migration/rdma: Move rdma constants from qemu-file.h to rdma.h
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231011203527.9061-9-quintela@redhat.com>
Juan Quintela [Wed, 11 Oct 2023 20:35:21 +0000 (22:35 +0200)]
qemu-file: Remove QEMUFileHooks
The only user was rdma, and its use is gone.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231011203527.9061-8-quintela@redhat.com>
Juan Quintela [Wed, 11 Oct 2023 20:35:20 +0000 (22:35 +0200)]
migration/rdma: Create rdma_control_save_page()
The only user of ram_control_save_page() and save_page() hook was
rdma. Just move the function to rdma.c, rename it to
rdma_control_save_page().
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231011203527.9061-7-quintela@redhat.com>
Juan Quintela [Wed, 11 Oct 2023 20:35:19 +0000 (22:35 +0200)]
migration/rdma: Unfold hook_ram_load()
There is only one flag called with: RAM_CONTROL_BLOCK_REG.
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231011203527.9061-6-quintela@redhat.com>
Juan Quintela [Wed, 11 Oct 2023 20:35:18 +0000 (22:35 +0200)]
migration/rdma: Remove all uses of RAM_CONTROL_HOOK
Instead of going through ram_control_load_hook(), call
qemu_rdma_registration_handle() directly.
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231011203527.9061-5-quintela@redhat.com>
Juan Quintela [Wed, 11 Oct 2023 20:35:17 +0000 (22:35 +0200)]
migration/rdma: Unfold ram_control_after_iterate()
Once there:
- Remove unused data parameter
- unfold it in its callers
- change all callers to call qemu_rdma_registration_stop()
- We need to call QIO_CHANNEL_RDMA() after we check for migrate_rdma()
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231011203527.9061-4-quintela@redhat.com>
Juan Quintela [Wed, 11 Oct 2023 20:35:16 +0000 (22:35 +0200)]
migration/rdma: Unfold ram_control_before_iterate()
Once there:
- Remove unused data parameter
- unfold it in its callers.
- change all callers to call qemu_rdma_registration_start()
- We need to call QIO_CHANNEL_RDMA() after we check for migrate_rdma()
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231011203527.9061-3-quintela@redhat.com>
Juan Quintela [Wed, 11 Oct 2023 20:35:15 +0000 (22:35 +0200)]
migration: Create migrate_rdma()
Helper to say if we are doing a migration over rdma.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231011203527.9061-2-quintela@redhat.com>
Juan Quintela [Wed, 11 Oct 2023 20:55:48 +0000 (22:55 +0200)]
migration: Non multifd migration don't care about multifd flushes
RDMA was having trouble because
migrate_multifd_flush_after_each_section() can only be true or false,
but we don't want to send any flush when we are not in multifd
migration.
CC: Fabiano Rosas <farosas@suse.de
Fixes:
294e5a4034e81 ("multifd: Only flush once each full round of memory")
Reported-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231011205548.10571-2-quintela@redhat.com>
Fiona Ebner [Fri, 13 Oct 2023 10:58:39 +0000 (12:58 +0200)]
migration: hold the BQL during setup
This is intended to be a semantic revert of commit
9b09503752
("migration: run setup callbacks out of big lock"). There have been so
many changes since that commit (e.g. a new setup callback
dirty_bitmap_save_setup() that also needs to be adapted now), it's
easier to do the revert manually.
For snapshots, the bdrv_writev_vmstate() function is used during setup
(in QIOChannelBlock backing the QEMUFile), but not holding the BQL
while calling it could lead to an assertion failure. To understand
how, first note the following:
1. Generated coroutine wrappers for block layer functions spawn the
coroutine and use AIO_WAIT_WHILE()/aio_poll() to wait for it.
2. If the host OS switches threads at an inconvenient time, it can
happen that a bottom half scheduled for the main thread's AioContext
is executed as part of a vCPU thread's aio_poll().
An example leading to the assertion failure is as follows:
main thread:
1. A snapshot-save QMP command gets issued.
2. snapshot_save_job_bh() is scheduled.
vCPU thread:
3. aio_poll() for the main thread's AioContext is called (e.g. when
the guest writes to a pflash device, as part of blk_pwrite which is a
generated coroutine wrapper).
4. snapshot_save_job_bh() is executed as part of aio_poll().
3. qemu_savevm_state() is called.
4. qemu_mutex_unlock_iothread() is called. Now
qemu_get_current_aio_context() returns 0x0.
5. bdrv_writev_vmstate() is executed during the usual savevm setup
via qemu_fflush(). But this function is a generated coroutine wrapper,
so it uses AIO_WAIT_WHILE. There, the assertion
assert(qemu_get_current_aio_context() == qemu_get_aio_context());
will fail.
To fix it, ensure that the BQL is held during setup. While it would
only be needed for snapshots, adapting migration too avoids additional
logic for conditional locking/unlocking in the setup callbacks.
Writing the header could (in theory) also trigger qemu_fflush() and
thus bdrv_writev_vmstate(), so the locked section also covers the
qemu_savevm_state_header() call, even for migration for consistency.
The section around multifd_send_sync_main() needs to be unlocked to
avoid a deadlock. In particular, the multifd_save_setup() function calls
socket_send_channel_create() using multifd_new_send_channel_async() as a
callback and then waits for the callback to signal via the
channels_ready semaphore. The connection happens via
qio_task_run_in_thread(), but the callback is only executed via
qio_task_thread_result() which is scheduled for the main event loop.
Without unlocking the section, the main thread would never get to
process the task result and the callback meaning there would be no
signal via the channels_ready semaphore.
The comment in ram_init_bitmaps() was introduced by
4987783400
("migration: fix incorrect memory_global_dirty_log_start outside BQL")
and is removed, because it referred to the qemu_mutex_lock_iothread()
call.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231013105839.415989-1-f.ebner@proxmox.com>
Fabiano Rosas [Wed, 12 Jul 2023 19:07:42 +0000 (16:07 -0300)]
tests/qtest: migration-test: Add tests for file-based migration
Add basic tests for file-based migration.
Note that we cannot use test_precopy_common because that routine
expects it to be possible to run the migration live. With the file
transport there is no live migration because we must wait for the
source to finish writing the migration data to the file before the
destination can start reading. Add a new migration function
specifically to handle the file migration.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20230712190742.22294-7-farosas@suse.de>
Fabiano Rosas [Mon, 9 Oct 2023 18:43:26 +0000 (15:43 -0300)]
tests/qtest/migration: Add a test for the analyze-migration script
Add a smoke test that migrates to a file and gives it to the
script. It should catch the most annoying errors such as changes in
the ram flags.
After code has been merged it becomes way harder to figure out what is
causing the script to fail, the person making the change is the most
likely to know right away what the problem is.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231009184326.15777-7-farosas@suse.de>
Fabiano Rosas [Mon, 9 Oct 2023 18:43:25 +0000 (15:43 -0300)]
migration: Fix analyze-migration read operation signedness
The migration code uses unsigned values for 16, 32 and 64-bit
operations. Fix the script to do the same.
This was causing an issue when parsing the migration stream generated
on the ppc64 target because one of instance_ids was larger than the
32bit signed maximum:
Traceback (most recent call last):
File "/home/fabiano/kvm/qemu/build/scripts/analyze-migration.py", line 658, in <module>
dump.read(dump_memory = args.memory)
File "/home/fabiano/kvm/qemu/build/scripts/analyze-migration.py", line 592, in read
classdesc = self.section_classes[section_key]
KeyError: ('spapr_iommu', -
2147483648)
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231009184326.15777-6-farosas@suse.de>