Merge branch 'for-6.6/wacom' into for-linus

Battery fixes by Aaron Armstrong Skomra

Merge branch 'for-6.6/steelseries' into for-linus

Add support for the Steelseries Arctis 1 XBox headset by Bastien Nocera

Merge branch 'for-6.6/sensor-hub' into for-linus

Allow multi-function sensor devices in sensor-hub by Daniel Thompson

Merge branch 'for-6.6/roccat' into for-linus

Constify class struct by Ivan Orlov and Greg Kroah-Hartman

Merge branch 'for-6.6/nvidia' into for-linus

LED fixes and Battery support for the Nvidia Shield by
Rahul Rameshbabu

Merge branch 'for-6.6/logitech' into for-linus

Various new device ID addition and a couple of HID++
fixes to tackle the last few opened bugs (Nikita Zhandarovich
and Benjamin Tissoires)

Merge branch 'for-6.6/google' into for-linus

Add support for Google Stadia force feedback by Fabio Baltieri

Merge branch 'for-6.6/elan' into for-linus

Make use of panel follower for the Ilitek ili9882t
driver by Cong Yang

Merge branch 'for-6.6/doc' into for-linus

Some docs explaining how HID works by Marco Morandini

Merge branch 'for-6.6/devm-fixes' into for-linus

Fix a wrong devm attachment to the input device which
now triggers a use after free with a recent devm change
by Rahul Rameshbabu.

Merge branch 'for-6.6/cp2112' into for-linus

Cleanup of the hid-cp2112 driver by Andy Shevchenko

HID: logitech-hidpp: rework one more time the retries attempts

Extract the internal code inside a helper function, fix the
initialization of the parameters used in the helper function
(`hidpp->answer_available` was not reset and `*response` wasn't either),
and use a `do {...} while();` loop.

Fixes: 586e8fede795 ("HID: logitech-hidpp: Retry commands when device is busy")
Cc: stable@vger.kernel.org
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230621-logitech-fixes-v2-1-3635f7f9c8af@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

HID: nvidia-shield: Reference hid_device devm allocation of input_dev name

Use hid_device for devm allocation of the input_dev name to avoid a
use-after-free. input_unregister_device would trigger devres cleanup of all
resources associated with the input_dev, free-ing the name. The name would
subsequently be used in a uevent fired at the end of unregistering the
input_dev.

Reported-by: Maxime Ripard <mripard@kernel.org>
Closes: https://lore.kernel.org/linux-input/ZOZIZCND+L0P1wJc@penguin/T/#m443f3dce92520f74b6cf6ffa8653f9c92643d4ae
Fixes: 09308562d4af ("HID: nvidia-shield: Initial driver implementation with Thunderstrike support")
Suggested-by: Maxime Ripard <mripard@kernel.org>
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230824061308.222021-4-sergeantsagara@protonmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

HID: multitouch: Correct devm device reference for hidinput input_dev name

Reference the HID device rather than the input device for the devm
allocation of the input_dev name. Referencing the input_dev would lead to a
use-after-free when the input_dev was unregistered and subsequently fires a
uevent that depends on the name. At the point of firing the uevent, the
name would be freed by devres management.

Use devm_kasprintf to simplify the logic for allocating memory and
formatting the input_dev name string.

Reported-by: Maxime Ripard <mripard@kernel.org>
Closes: https://lore.kernel.org/linux-input/ZOZIZCND+L0P1wJc@penguin/T/#m443f3dce92520f74b6cf6ffa8653f9c92643d4ae
Fixes: c08d46aa805b ("HID: multitouch: devm conversion")
Suggested-by: Maxime Ripard <mripard@kernel.org>
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230824061308.222021-3-sergeantsagara@protonmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

HID: uclogic: Correct devm device reference for hidinput input_dev name

Reference the HID device rather than the input device for the devm
allocation of the input_dev name. Referencing the input_dev would lead to a
use-after-free when the input_dev was unregistered and subsequently fires a
uevent that depends on the name. At the point of firing the uevent, the
name would be freed by devres management.

Use devm_kasprintf to simplify the logic for allocating memory and
formatting the input_dev name string.

Reported-by: syzbot+3a0ebe8a52b89c63739d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-input/ZOZIZCND+L0P1wJc@penguin/T/
Reported-by: Maxime Ripard <mripard@kernel.org>
Closes: https://lore.kernel.org/linux-input/ZOZIZCND+L0P1wJc@penguin/T/#m443f3dce92520f74b6cf6ffa8653f9c92643d4ae
Fixes: cce2dbdf258e ("HID: uclogic: name the input nodes based on their tool")
Suggested-by: Maxime Ripard <mripard@kernel.org>
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230824061308.222021-2-sergeantsagara@protonmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

HID: logitech-dj: Fix error handling in logi_dj_recv_switch_to_dj_mode()

Presently, if a call to logi_dj_recv_send_report() fails, we do
not learn about the error until after sending short
HID_OUTPUT_REPORT with hid_hw_raw_request().
To handle this somewhat unlikely issue, return on error in
logi_dj_recv_send_report() (minding ugly sleep workaround) and
take into account the result of hid_hw_raw_request().

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: 6a9ddc897883 ("HID: logitech-dj: enable notifications on connect/disconnect")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20230613101635.77820-1-n.zhandarovich@fintech.ru
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

HID: i2c-hid: elan: Add ili9882t timing

The ili9882t is a TDDI IC (Touch with Display Driver). The
datasheet specifies there should be 60ms between touch SDA
sleep and panel RESX. Doug's series[1] allows panels and
touchscreens to power on/off together, so we can add the 65 ms
delay in i2c_hid_core_suspend before panel_unprepare.

Because ili9882t touchscrgeen is a panel follower, and
needs to use vccio-supply instead of vcc33-supply, so set
it NULL to ili9882t_chip_data, then not use vcc33 regulator.

[1]: https://lore.kernel.org/all/20230727171750.633410-1-dianders@chromium.org

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20230802071947.1683318-3-yangcong5@huaqin.corp-partner.google.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

dt-bindings: input: i2c-hid: Introduce Ilitek ili9882t

The ili9882t touch screen chip same as Elan eKTH6915 controller
has a reset gpio. The difference is that ili9882t needs to use
vccio-supply instead of vcc33-supply. Doug's series[1] allows panels
and touchscreens to power on/off together, let's add a phandle for this.

[1]: https://lore.kernel.org/r/20230607215224.2067679-1-dianders@chromium.org

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230802071947.1683318-2-yangcong5@huaqin.corp-partner.google.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

HID: steelseries: arctis_1_battery_request[] should be static

arctis_1_battery_request[] is not used outside of this module, and as
such should be static.

Fixes: a0c76896c3fbdc2 ("HID: steelseries: Add support for Arctis 1 XBox")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

MAINTAINERS: update my email address

Update my email-address in MAINTAINERS to <david@readahead.eu>. Also add
.mailmap entries to map my old surname and email-addresses.

Signed-off-by: David Rheinsberg <david@readahead.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: logitech-hidpp: Add support for Logitech MX Anywhere 3 mouse

Add Logitech MX Anywhere 3 connected over Bluetooth to the device table
to get hidpi scroll supported. USB connection over the Unifying receiver
is already supported by the wildcard entry LDJ_DEVICE(HID_ANY_ID).

Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: wacom: struct name cleanup

Help differentiate the two remote related "serial" struct variables by
renaming "wacom_remote_data" to "wacom_remote_work_data".

Signed-off-by: Aaron Skomra <skomra@gmail.com>
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: wacom: remove unnecessary 'connected' variable from EKR

The 'connected' variable was poorly named, and this has led to some
confusion. We can get the same information by checking if a serial number
exists in the specified EKR slot.

Signed-off-by: Aaron Skomra <skomra@gmail.com>
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: wacom: remove the battery when the EKR is off

Currently the EKR battery remains even after we stop getting information
from the device. This can lead to a stale battery persisting indefinitely
in userspace.

The remote sends a heartbeat every 10 seconds. Delete the battery if we
miss two heartbeats (after 21 seconds). Restore the battery once we see
a heartbeat again.

Signed-off-by: Aaron Skomra <skomra@gmail.com>
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Fixes: 9f1015d45f62 ("HID: wacom: EKR: attach the power_supply on first connection")
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: nvidia-shield: Update Thunderstrike LED instance name to use id

Previously would let led_classdev handle renaming when name collision
occurred. Now that an ID allocator is used to uniquely identify multiple
Thunderstrike controllers, generate unique led device names.

Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: nvidia-shield: Add battery support for Thunderstrike

Use power supply API to expose battery information about connected
Thunderstrike controllers to the system. Provide information on battery
capacity, charge status, charger type, voltage, and temperature.

Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: nvidia-shield: Remove led_classdev_unregister in thunderstrike_create

Avoid calling thunderstrike_led_set_brightness from thunderstrike_create
when led_classdev_unregister is called. led_classdev_unregister was called
from thunderstrike_create in the error path. Calling
thunderstrike_led_set_brightness in this situation is unsafe.

Fixes: f88af60e74a5 ("HID: nvidia-shield: Support LED functionality for Thunderstrike")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: hid-google-stadiaff: add support for Stadia force feedback

Add a hid-google-stadiaff module to support rumble based force feedback
on the Google Stadia controller. This works using the HID output
endpoint exposed on both the USB and BLE interface.

Signed-off-by: Fabio Baltieri <fabiobaltieri@chromium.org>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: logitech-dj: Add support for a new lightspeed receiver iteration

The lightspeed receiver for the Pro X Superlight uses 13 byte mouse reports
without a report id. The workaround for such cases has been adjusted to
handle these larger packets.

The device now reports the status of its battery in wireless mode and
libratbag now recognizes the device and it can be configured with Piper.

https://github.com/libratbag/libratbag/pull/1122

Co-developed-by: Filipe Laíns <lains@riseup.net>
Signed-off-by: Filipe Laíns <lains@riseup.net>
Signed-off-by: Mavroudis Chatzilazaridis <mavchatz@protonmail.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: logitech-hidpp: Add support for the Pro X Superlight

This patch adds support for the Pro X Superlight over wired USB.
The device now reports the status of its battery.

Co-developed-by: Filipe Laíns <lains@riseup.net>
Signed-off-by: Filipe Laíns <lains@riseup.net>
Signed-off-by: Mavroudis Chatzilazaridis <mavchatz@protonmail.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: steelseries: Add support for Arctis 1 XBox

Add support for the Steelseries Arctis 1 XBox headset. This driver
will export the battery information from the headset, as well as the
"wireless_status" property.

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: hidraw: make hidraw_class structure const

Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.

Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: roccat: make all 'class' structures const

Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.

Cc: Stefan Achatz <erazor_de@users.sourceforge.net>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: logitech-hidpp: Rename HID++ "internal" error constant

As per the upstream "hidpp" helpers commit:
"
There has been some confusion about error value 5 but feature specs that
refer to it generally use NOT_ALLOWED.
"

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://github.com/mrubli2/hidpp/commit/80c3fecfcd89c5efe0f16feabe90a55ddfd25aaa
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: Reorder fields in 'struct hid_input'

Group some variables based on their sizes to reduce hole and avoid padding.
On x86_64, this shrinks the size of 'struct hid_input'
from 72 to 64 bytes.

It saves a few bytes of memory and is more cache-line friendly.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: input: Support devices sending Eraser without Invert

Some digitizers (notably XP-Pen Artist 24) do not report the Invert
usage when erasing.  This causes the device to be permanently stuck with
the BTN_TOOL_RUBBER tool after sending Eraser, as Invert is the only
usage that can release the tool.  In this state, Touch and Inrange are
no longer reported to userspace, rendering the pen unusable.

Prior to commit 87562fcd1342 ("HID: input: remove the need for
HID_QUIRK_INVERT"), BTN_TOOL_RUBBER was never set and Eraser events were
simply translated into BTN_TOUCH without causing an inconsistent state.

Introduce HID_QUIRK_NOINVERT for such digitizers and detect them during
hidinput_configure_usage().  This quirk causes the tool to be released
as soon as Eraser is reported as not set.  Set BTN_TOOL_RUBBER in
input->keybit when mapping Eraser.

Fixes: 87562fcd1342 ("HID: input: remove the need for HID_QUIRK_INVERT")
Co-developed-by: Nils Fuhler <nils@nilsfuhler.de>
Signed-off-by: Nils Fuhler <nils@nilsfuhler.de>
Signed-off-by: Illia Ostapyshyn <ostapyshyn@sra.uni-hannover.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: sensor-hub: Allow multi-function sensor devices

The Lenovo Yoga C630 has a combined keyboard and accelerometer that
interfaces via i2c-hid. Currently this laptop either has a working
keyboard (if CONFIG_HID_SENSOR_HUB is disabled) or a working accelerometer.
only works on kernels. Put another way, most distro kernels enable
CONFIG_HID_SENSOR_HUB and therefore cannot work on this device since the
keyboard doesn't work!

Fix this by providing a richer connect mask during the probe. With this
change both keyboard and screen orientation sensors work correctly.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Srinivas Pandruvada<srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: Add introduction about HID for non-kernel programmers

Add an introduction about HID meant for the casual programmer
that is trying either to fix his device or to understand
what is going wrong.

Signed-off-by: Marco Morandini <marco.morandini@polimi.it>
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: cp2112: Use octal permissions

Octal permissions are preferred as stated in
Documentation/dev-tools/checkpatch.rst. Replace symbolic permissions
with octal permissions when creating the files.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230703185222.50554-13-andriy.shevchenko@linux.intel.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

HID: cp2112: Convert to DEVICE_ATTR_RW()

Instead of custom wrapper, use DEVICE_tATTR_RW() directly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230703185222.50554-12-andriy.shevchenko@linux.intel.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

HID: cp2112: Use sysfs_emit() to instead of scnprintf()

Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230703185222.50554-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

HID: cp2112: Use BIT() in GPIO setter and getter

Use BIT() in GPIO setter and getter for the sake of consistency
with GENMASK() usage elsewhere in the driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230703185222.50554-10-andriy.shevchenko@linux.intel.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

HID: cp2112: Define all GPIO mask and use it

Define all GPIO mask and use it in the driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230703185222.50554-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

HID: cp2112: Define maximum GPIO constant and use it

Define maximum GPIO constant and use it in the driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230703185222.50554-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

HID: cp2112: Remove dead code

Remove cp2112_allocate_irq() and counterparts that seems to be
a dead code from day 1. In case somebody needs it, it can be
retrieved from Git index.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230703185222.50554-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

HID: cp2112: Don't call ->to_irq() explicitly

GPIO library guarantees that ->to_irq() is always exists.
Moreover, it tending to become a nische thingy and has to
not be used in ordinary drivers. Hence, replace that by
irq_find_mapping().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230703185222.50554-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

HID: cp2112: Switch to for_each_set_bit() to simplify the code

It's cleaner to use for_each_set_bit() than open coding it.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230703185222.50554-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

HID: cp2112: Make irq_chip immutable

Since recently, the kernel is nagging about mutable irq_chips:

   "not an immutable chip, please consider fixing it!"

Drop the unneeded copy, flag it as IRQCHIP_IMMUTABLE, add the new
helper functions and call the appropriate gpiolib functions.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230703185222.50554-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

HID: cp2112: Use str_write_read() and str_read_write()

Use str_write_read() and str_read_write() from string_choices.h.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230703185222.50554-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

lib/string_choices: Add str_write_read() helper

Add an inversed variant of str_read_write(), i.e. str_write_read().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230703185222.50554-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

Merge tag 'for-linus-2023071101' of git://git./linux/kernel/git/hid/hid

Pull HID fixes from Benjamin Tissoires:

 - AMD SFH shift-out-of-bounds fix (Basavaraj Natikar)

 - avoid struct memcpy overrun warning in the hid-hyperv module (Arnd
   Bergmann)

 - a quick HID kselftests script fix for our CI to be happy (Benjamin
   Tissoires)

 - various fixes and additions of device IDs

* tag 'for-linus-2023071101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: amd_sfh: Fix for shift-out-of-bounds
  HID: amd_sfh: Rename the float32 variable
  HID: input: fix mapping for camera access keys
  HID: logitech-hidpp: Add wired USB id for Logitech G502 Lightspeed
  HID: nvidia-shield: Pack inner/related declarations in HOSTCMD reports
  HID: hyperv: avoid struct memcpy overrun warning
  selftests: hid: fix vmtests.sh not running make headers

Merge tag 'linux-watchdog-6.5-rc2' of git://linux-watchdog.org/linux-watchdog

Pull watchdog update from Wim Van Sebroeck:

 - Add Loongson-1 watchdog dt-bindings

* tag 'linux-watchdog-6.5-rc2' of git://www.linux-watchdog.org/linux-watchdog:
  dt-bindings: watchdog: Add Loongson-1 watchdog

Merge tag 'v6.5-p2' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
 "Fix a couple of regressions in af_alg and incorrect return values in
 crypto/asymmetric_keys/public_key"

* tag 'v6.5-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif_hash - Fix race between MORE and non-MORE sends
  KEYS: asymmetric: Fix error codes
  crypto: af_alg - Fix merging of written data into spliced pages

HID: amd_sfh: Fix for shift-out-of-bounds

Shift operation of 'exp' and 'shift' variables exceeds the maximum number
of shift values in the u32 range leading to UBSAN shift-out-of-bounds.

...
[    6.120512] UBSAN: shift-out-of-bounds in drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c:149:50
[    6.120598] shift exponent 104 is too large for 64-bit type 'long unsigned int'
[    6.120659] CPU: 4 PID: 96 Comm: kworker/4:1 Not tainted 6.4.0amd_1-next-20230519-dirty #10
[    6.120665] Hardware name: AMD Birman-PHX/Birman-PHX, BIOS SFH_with_HPD_SEN.FD 04/05/2023
[    6.120667] Workqueue: events amd_sfh_work_buffer [amd_sfh]
[    6.120687] Call Trace:
[    6.120690]  <TASK>
[    6.120694]  dump_stack_lvl+0x48/0x70
[    6.120704]  dump_stack+0x10/0x20
[    6.120707]  ubsan_epilogue+0x9/0x40
[    6.120716]  __ubsan_handle_shift_out_of_bounds+0x10f/0x170
[    6.120720]  ? psi_group_change+0x25f/0x4b0
[    6.120729]  float_to_int.cold+0x18/0xba [amd_sfh]
[    6.120739]  get_input_rep+0x57/0x340 [amd_sfh]
[    6.120748]  ? __schedule+0xba7/0x1b60
[    6.120756]  ? __pfx_get_input_rep+0x10/0x10 [amd_sfh]
[    6.120764]  amd_sfh_work_buffer+0x91/0x180 [amd_sfh]
[    6.120772]  process_one_work+0x229/0x430
[    6.120780]  worker_thread+0x4a/0x3c0
[    6.120784]  ? __pfx_worker_thread+0x10/0x10
[    6.120788]  kthread+0xf7/0x130
[    6.120792]  ? __pfx_kthread+0x10/0x10
[    6.120795]  ret_from_fork+0x29/0x50
[    6.120804]  </TASK>
...

Fix this by adding the condition to validate shift ranges.

Fixes: 93ce5e0231d7 ("HID: amd_sfh: Implement SFH1.1 functionality")
Cc: stable@vger.kernel.org
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Link: https://lore.kernel.org/r/20230707065722.9036-3-Basavaraj.Natikar@amd.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

HID: amd_sfh: Rename the float32 variable

As float32 is also used in other places as a data type, it is necessary
to rename the float32 variable in order to avoid confusion.

Cc: stable@vger.kernel.org
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Link: https://lore.kernel.org/r/20230707065722.9036-2-Basavaraj.Natikar@amd.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

Linux 6.5-rc1

MAINTAINERS 2: Electric Boogaloo

We just sorted the entries and fields last release, so just out of a
perverse sense of curiosity, I decided to see if we can keep things
ordered for even just one release.

The answer is "No. No we cannot".

I suggest that all kernel developers will need weekly training sessions,
involving a lot of Big Bird and Sesame Street.  And at the yearly
maintainer summit, we will all sing the alphabet song together.

I doubt I will keep doing this.  At some point "perverse sense of
curiosity" turns into just a cold dark place filled with sadness and
despair.

Repeats: 80e62bc8487b ("MAINTAINERS: re-sort all entries and fields")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping fixes from Christoph Hellwig:

 - swiotlb area sizing fixes (Petr Tesarik)

* tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: reduce the number of areas to match actual memory pool size
  swiotlb: always set the number of areas before allocating the pool

Merge tag 'irq_urgent_for_v6.5_rc1' of git://git./linux/kernel/git/tip/tip

Pull irq update from Borislav Petkov:

 - Optimize IRQ domain's name assignment

* tag 'irq_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqdomain: Use return value of strreplace()

Merge tag 'x86_urgent_for_v6.5_rc1' of git://git./linux/kernel/git/tip/tip

Pull x86 fpu fix from Borislav Petkov:

 - Do FPU AP initialization on Xen PV too which got missed by the recent
   boot reordering work

* tag 'x86_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/xen: Fix secondary processors' FPU initialization

Merge tag 'x86-core-2023-07-09' of git://git./linux/kernel/git/tip/tip

Pull x86 fix from Thomas Gleixner:
 "A single fix for the mechanism to park CPUs with an INIT IPI.

  On shutdown or kexec, the kernel tries to park the non-boot CPUs with
  an INIT IPI. But the same code path is also used by the crash utility.
  If the CPU which panics is not the boot CPU then it sends an INIT IPI
  to the boot CPU which resets the machine.

  Prevent this by validating that the CPU which runs the stop mechanism
  is the boot CPU. If not, leave the other CPUs in HLT"

* tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/smp: Don't send INIT to boot CPU

Merge tag 'mips_6.5_1' of git://git./linux/kernel/git/mips/linux

Pull MIPS fixes from Thomas Bogendoerfer:

 - fixes for KVM

 - fix for loongson build and cpu probing

 - DT fixes

* tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled
  MIPS: dts: add missing space before {
  MIPS: Loongson: Fix build error when make modules_install
  MIPS: KVM: Fix NULL pointer dereference
  MIPS: Loongson: Fix cpu_probe_loongson() again

Merge tag 'xfs-6.5-merge-6' of git://git./fs/xfs/xfs-linux

Pull xfs fix from Darrick Wong:
 "Nothing exciting here, just getting rid of a gcc warning that I got
  tired of seeing when I turn on gcov"

* tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix uninit warning in xfs_growfs_data

Merge tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6

Pull more smb client updates from Steve French:

 - fix potential use after free in unmount

 - minor cleanup

 - add worker to cleanup stale directory leases

* tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Add a laundromat thread for cached directories
  smb: client: remove redundant pointer 'server'
  cifs: fix session state transition to avoid use-after-free issue

Merge tag 'ntb-6.5' of https://github.com/jonmason/ntb

Pull NTB updates from Jon Mason:
 "Fixes for pci_clean_master, error handling in driver inits, and
  various other issues/bugs"

* tag 'ntb-6.5' of https://github.com/jonmason/ntb:
  ntb: hw: amd: Fix debugfs_create_dir error checking
  ntb.rst: Fix copy and paste error
  ntb_netdev: Fix module_init problem
  ntb: intel: Remove redundant pci_clear_master
  ntb: epf: Remove redundant pci_clear_master
  ntb_hw_amd: Remove redundant pci_clear_master
  ntb: idt: drop redundant pci_enable_pcie_error_reporting()
  MAINTAINERS: git://github -> https://github.com for jonmason
  NTB: EPF: fix possible memory leak in pci_vntb_probe()
  NTB: ntb_tool: Add check for devm_kcalloc
  NTB: ntb_transport: fix possible memory leak while device_register() fails
  ntb: intel: Fix error handling in intel_ntb_pci_driver_init()
  NTB: amd: Fix error handling in amd_ntb_pci_driver_init()
  ntb: idt: Fix error handling in idt_pci_driver_init()

HID: input: fix mapping for camera access keys

Commit 9f4211bf7f81 ("HID: add mapping for camera access keys") added
mapping for the camera access keys, but unfortunately used wrong usage
codes for them. HUTRR72[1] specifies that camera access controls use 0x76,
0x077 and 0x78 usages in the consumer control page. Previously mapped 0xd5,
0xd6 and 0xd7 usages are actually defined in HUTRR64[2] as game recording
controls.

[1] https://www.usb.org/sites/default/files/hutrr72_-_usages_to_control_camera_access_0.pdf
[2] https://www.usb.org/sites/default/files/hutrr64b_-_game_recording_controllers_0.pdf

Fixes: 9f4211bf7f81 ("HID: add mapping for camera access keys")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/ZJtd/fMXRUgq20TW@google.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

HID: logitech-hidpp: Add wired USB id for Logitech G502 Lightspeed

Previously, support for the G502 had been attempted in commit
'27fc32fd9417 ("HID: logitech-hidpp: add USB PID for a few more supported
mice")'

This caused some issues and was reverted by
'addf3382c47c ("Revert "HID: logitech-hidpp: add USB PID for a few more
supported mice"")'.

Since then, a new version of this mouse has been released (Lightpseed
Wireless), and works correctly.

This device has support for battery reporting with the driver

Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230630113818.13005-1-stuart.a.hayhurst@gmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

HID: nvidia-shield: Pack inner/related declarations in HOSTCMD reports

Match alignment information in composite type declarations used by packed
HOSTCMD report structures. Compiler packing attribute is not recursive for
inner declarations. Mismatched alignment information can cause undefined
behavior in code generated for accessing composite type members. struct
pointers passed to thunderstrike_parse_board_info_payload and
thunderstrike_parse_haptics_payload are an example of this being
potentially problematic since alignment information from the packed HOSTCMD
report is lost.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307041500.6bKn7nCl-lkp@intel.com/
Link: https://github.com/llvm/llvm-project/issues/55520#issuecomment-1128617570
Link: https://gcc.gnu.org/onlinedocs/gcc-13.1.0/gcc/Common-Type-Attributes.html#index-packed-type-attribute
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Link: https://lore.kernel.org/r/20230705060414.581468-1-rrameshbabu@nvidia.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

HID: hyperv: avoid struct memcpy overrun warning

A previous patch addressed the fortified memcpy warning for most
builds, but I still see this one with gcc-9:

In file included from include/linux/string.h:254,
                 from drivers/hid/hid-hyperv.c:8:
In function 'fortify_memcpy_chk',
    inlined from 'mousevsc_on_receive' at drivers/hid/hid-hyperv.c:272:3:
include/linux/fortify-string.h:583:4: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
  583 |    __write_overflow_field(p_size_field, size);
      |    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

My guess is that the WARN_ON() itself is what confuses gcc, so it no
longer sees that there is a correct range check. Rework the code in a
way that helps readability and avoids the warning.

Fixes: 542f25a94471 ("HID: hyperv: Replace one-element array with flexible-array member")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230705140242.844167-1-arnd@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

selftests: hid: fix vmtests.sh not running make headers

According to commit 01d6c48a828b ("Documentation: kselftest:
"make headers" is a prerequisite"), running the kselftests requires
to run "make headers" first.

Do that in "vmtest.sh" as well to fix the HID CI.

Link: https://lore.kernel.org/r/20230709-fix-selftests-v1-1-57d0878114cc@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

mm: lock newly mapped VMA with corrected ordering

Lockdep is certainly right to complain about

  (&vma->vm_lock->lock){++++}-{3:3}, at: vma_start_write+0x2d/0x3f
                 but task is already holding lock:
  (&mapping->i_mmap_rwsem){+.+.}-{3:3}, at: mmap_region+0x4dc/0x6db

Invert those to the usual ordering.

Fixes: 33313a747e81 ("mm: lock newly mapped VMA which can be modified after it becomes visible")
Cc: stable@vger.kernel.org
Signed-off-by: Hugh Dickins <hughd@google.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git./linux/kernel/git/akpm/mm

Pull hotfixes from Andrew Morton:
 "16 hotfixes. Six are cc:stable and the remainder address post-6.4
  issues"

The merge undoes the disabling of the CONFIG_PER_VMA_LOCK feature, since
it was all hopefully fixed in mainline.

* tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  lib: dhry: fix sleeping allocations inside non-preemptable section
  kasan, slub: fix HW_TAGS zeroing with slub_debug
  kasan: fix type cast in memory_is_poisoned_n
  mailmap: add entries for Heiko Stuebner
  mailmap: update manpage link
  bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page
  MAINTAINERS: add linux-next info
  mailmap: add Markus Schneider-Pargmann
  writeback: account the number of pages written back
  mm: call arch_swap_restore() from do_swap_page()
  squashfs: fix cache race with migration
  mm/hugetlb.c: fix a bug within a BUG(): inconsistent pte comparison
  docs: update ocfs2-devel mailing list address
  MAINTAINERS: update ocfs2-devel mailing list address
  mm: disable CONFIG_PER_VMA_LOCK until its fixed
  fork: lock VMAs of the parent process when forking

fork: lock VMAs of the parent process when forking

When forking a child process, the parent write-protects anonymous pages
and COW-shares them with the child being forked using copy_present_pte().

We must not take any concurrent page faults on the source vma's as they
are being processed, as we expect both the vma and the pte's behind it
to be stable.  For example, the anon_vma_fork() expects the parents
vma->anon_vma to not change during the vma copy.

A concurrent page fault on a page newly marked read-only by the page
copy might trigger wp_page_copy() and a anon_vma_prepare(vma) on the
source vma, defeating the anon_vma_clone() that wasn't done because the
parent vma originally didn't have an anon_vma, but we now might end up
copying a pte entry for a page that has one.

Before the per-vma lock based changes, the mmap_lock guaranteed
exclusion with concurrent page faults.  But now we need to do a
vma_start_write() to make sure no concurrent faults happen on this vma
while it is being processed.

This fix can potentially regress some fork-heavy workloads.  Kernel
build time did not show noticeable regression on a 56-core machine while
a stress test mapping 10000 VMAs and forking 5000 times in a tight loop
shows ~5% regression.  If such fork time regression is unacceptable,
disabling CONFIG_PER_VMA_LOCK should restore its performance.  Further
optimizations are possible if this regression proves to be problematic.

Suggested-by: David Hildenbrand <david@redhat.com>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://lore.kernel.org/all/dbdef34c-3a07-5951-e1ae-e9c6e3cdf51b@kernel.org/
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Closes: https://lore.kernel.org/all/b198d649-f4bf-b971-31d0-e8433ec2a34c@applied-asynchrony.com/
Reported-by: Jacob Young <jacobly.alt@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217624
Fixes: 0bff0aaea03e ("x86/mm: try VMA lock-based page fault handling first")
Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: lock newly mapped VMA which can be modified after it becomes visible

mmap_region adds a newly created VMA into VMA tree and might modify it
afterwards before dropping the mmap_lock.  This poses a problem for page
faults handled under per-VMA locks because they don't take the mmap_lock
and can stumble on this VMA while it's still being modified.  Currently
this does not pose a problem since post-addition modifications are done
only for file-backed VMAs, which are not handled under per-VMA lock.
However, once support for handling file-backed page faults with per-VMA
locks is added, this will become a race.

Fix this by write-locking the VMA before inserting it into the VMA tree.
Other places where a new VMA is added into VMA tree do not modify it
after the insertion, so do not need the same locking.

Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: lock a vma before stack expansion

With recent changes necessitating mmap_lock to be held for write while
expanding a stack, per-VMA locks should follow the same rules and be
write-locked to prevent page faults into the VMA being expanded. Add
the necessary locking.

Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
 "A few late arriving patches that missed the initial pull request. It's
  mostly bug fixes (the dt-bindings is a fix for the initial pull)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: core: Remove unused function declaration
  scsi: target: docs: Remove tcm_mod_builder.py
  scsi: target: iblock: Quiet bool conversion warning with pr_preempt use
  scsi: dt-bindings: ufs: qcom: Fix ICE phandle
  scsi: core: Simplify scsi_cdl_check_cmd()
  scsi: isci: Fix comment typo
  scsi: smartpqi: Replace one-element arrays with flexible-array members
  scsi: target: tcmu: Replace strlcpy() with strscpy()
  scsi: ncr53c8xx: Replace strlcpy() with strscpy()
  scsi: lpfc: Fix lpfc_name struct packing

Merge tag 'i2c-for-6.5-rc1-part2' of git://git./linux/kernel/git/wsa/linux

Pull more i2c updates from Wolfram Sang:

 - xiic patch should have been in the original pull but slipped through

 - mpc patch fixes a build regression

 - nomadik cleanup

* tag 'i2c-for-6.5-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mpc: Drop unused variable
  i2c: nomadik: Remove a useless call in the remove function
  i2c: xiic: Don't try to handle more interrupt events after error

Merge tag 'hardening-v6.5-rc1-fixes' of git://git./linux/kernel/git/kees/linux

Pull hardening fixes from Kees Cook:

 - Check for NULL bdev in LoadPin (Matthias Kaehlcke)

 - Revert unwanted KUnit FORTIFY build default

 - Fix 1-element array causing boot warnings with xhci-hub

* tag 'hardening-v6.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  usb: ch9: Replace bmSublinkSpeedAttr 1-element array with flexible array
  Revert "fortify: Allow KUnit test to build without FORTIFY"
  dm: verity-loadpin: Add NULL pointer check for 'bdev' parameter

ntb: hw: amd: Fix debugfs_create_dir error checking

The debugfs_create_dir function returns ERR_PTR in case of error, and the
only correct way to check if an error occurred is 'IS_ERR' inline function.
This patch will replace the null-comparison with IS_ERR.

Signed-off-by: Anup Sharma <anupnewsmail@gmail.com>
Suggested-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

Merge tag 'perf-tools-for-v6.5-2-2023-07-06' of git://git./linux/kernel/git/perf/perf-tools-next

Pull more perf tools updates from Namhyung Kim:
 "These are remaining changes and fixes for this cycle.

  Build:

   - Allow generating vmlinux.h from BTF using `make GEN_VMLINUX_H=1`
     and skip if the vmlinux has no BTF.

   - Replace deprecated clang -target xxx option by --target=xxx.

  perf record:

   - Print event attributes with well known type and config symbols in
     the debug output like below:

       # perf record -e cycles,cpu-clock -C0 -vv true
       <SNIP>
       ------------------------------------------------------------
       perf_event_attr:
         type                             0 (PERF_TYPE_HARDWARE)
         size                             136
         config                           0 (PERF_COUNT_HW_CPU_CYCLES)
         { sample_period, sample_freq }   4000
         sample_type                      IP|TID|TIME|CPU|PERIOD|IDENTIFIER
         read_format                      ID
         disabled                         1
         inherit                          1
         freq                             1
         sample_id_all                    1
         exclude_guest                    1
       ------------------------------------------------------------
       sys_perf_event_open: pid -1  cpu 0  group_fd -1  flags 0x8 = 5
       ------------------------------------------------------------
       perf_event_attr:
         type                             1 (PERF_TYPE_SOFTWARE)
         size                             136
         config                           0 (PERF_COUNT_SW_CPU_CLOCK)
         { sample_period, sample_freq }   4000
         sample_type                      IP|TID|TIME|CPU|PERIOD|IDENTIFIER
         read_format                      ID
         disabled                         1
         inherit                          1
         freq                             1
         sample_id_all                    1
         exclude_guest                    1

   - Update AMD IBS event error message since it now support per-process
     profiling but no priviledge filters.

       $ sudo perf record -e ibs_op//k -C 0
       Error:
       AMD IBS doesn't support privilege filtering. Try again without
       the privilege modifiers (like 'k') at the end.

  perf lock contention:

   - Support CSV style output using -x option

       $ sudo perf lock con -ab -x, sleep 1
       # output: contended, total wait, max wait, avg wait, type, caller
       19, 194232, 21415, 10222, spinlock, process_one_work+0x1f0
       15, 162748, 23843, 10849, rwsem:R, do_user_addr_fault+0x40e
       4, 86740, 23415, 21685, rwlock:R, ep_poll_callback+0x2d
       1, 84281, 84281, 84281, mutex, iwl_mvm_async_handlers_wk+0x135
       8, 67608, 27404, 8451, spinlock, __queue_work+0x174
       3, 58616, 31125, 19538, rwsem:W, do_mprotect_pkey+0xff
       3, 52953, 21172, 17651, rwlock:W, do_epoll_wait+0x248
       2, 30324, 19704, 15162, rwsem:R, do_madvise+0x3ad
       1, 24619, 24619, 24619, spinlock, rcu_core+0xd4

   - Add --output option to save the data to a file not to be interfered
     by other debug messages.

  Test:

   - Fix event parsing test on ARM where there's no raw PMU nor supports
     PERF_PMU_CAP_EXTENDED_HW_TYPE.

   - Update the lock contention test case for CSV output.

   - Fix a segfault in the daemon command test.

  Vendor events (JSON):

   - Add has_event() to check if the given event is available on system
     at runtime. On Intel machines, some transaction events may not be
     present when TSC extensions are disabled.

   - Update Intel event metrics.

  Misc:

   - Sort symbols by name using an external array of pointers instead of
     a rbtree node in the symbol. This will save 16-bytes or 24-bytes
     per symbol whether the sorting is actually requested or not.

   - Fix unwinding DWARF callstacks using libdw when --symfs option is
     used"

* tag 'perf-tools-for-v6.5-2-2023-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next: (38 commits)
  perf test: Fix event parsing test when PERF_PMU_CAP_EXTENDED_HW_TYPE isn't supported.
  perf test: Fix event parsing test on Arm
  perf evsel amd: Fix IBS error message
  perf: unwind: Fix symfs with libdw
  perf symbol: Fix uninitialized return value in symbols__find_by_name()
  perf test: Test perf lock contention CSV output
  perf lock contention: Add --output option
  perf lock contention: Add -x option for CSV style output
  perf lock: Remove stale comments
  perf vendor events intel: Update tigerlake to 1.13
  perf vendor events intel: Update skylakex to 1.31
  perf vendor events intel: Update skylake to 57
  perf vendor events intel: Update sapphirerapids to 1.14
  perf vendor events intel: Update icelakex to 1.21
  perf vendor events intel: Update icelake to 1.19
  perf vendor events intel: Update cascadelakex to 1.19
  perf vendor events intel: Update meteorlake to 1.03
  perf vendor events intel: Add rocketlake events/metrics
  perf vendor metrics intel: Make transaction metrics conditional
  perf jevents: Support for has_event function
  ...

Merge tag 'bitmap-6.5-rc1' of https://github.com/norov/linux

Pull bitmap updates from Yury Norov:
 "Fixes for different bitmap pieces:

   - lib/test_bitmap: increment failure counter properly

     The tests that don't use expect_eq() macro to determine that a test
     is failured must increment failed_tests explicitly.

   - lib/bitmap: drop optimization of bitmap_{from,to}_arr64

     bitmap_{from,to}_arr64() optimization is overly optimistic
     on 32-bit LE architectures when it's wired to
     bitmap_copy_clear_tail().

   - nodemask: Drop duplicate check in for_each_node_mask()

     As the return value type of first_node() became unsigned, the node
     >= 0 became unnecessary.

   - cpumask: fix function description kernel-doc notation

   - MAINTAINERS: Add bits.h and bitfield.h to the BITMAP API record

     Add linux/bits.h and linux/bitfield.h for visibility"

* tag 'bitmap-6.5-rc1' of https://github.com/norov/linux:
  MAINTAINERS: Add bitfield.h to the BITMAP API record
  MAINTAINERS: Add bits.h to the BITMAP API record
  cpumask: fix function description kernel-doc notation
  nodemask: Drop duplicate check in for_each_node_mask()
  lib/bitmap: drop optimization of bitmap_{from,to}_arr64
  lib/test_bitmap: increment failure counter properly

lib: dhry: fix sleeping allocations inside non-preemptable section

The Smatch static checker reports the following warnings:

    lib/dhry_run.c:38 dhry_benchmark() warn: sleeping in atomic context
    lib/dhry_run.c:43 dhry_benchmark() warn: sleeping in atomic context

Indeed, dhry() does sleeping allocations inside the non-preemptable
section delimited by get_cpu()/put_cpu().

Fix this by using atomic allocations instead.
Add error handling, as atomic these allocations may fail.

Link: https://lkml.kernel.org/r/bac6d517818a7cd8efe217c1ad649fffab9cc371.1688568764.git.geert+renesas@glider.be
Fixes: 13684e966d46283e ("lib: dhry: fix unstable smp_processor_id(_) usage")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/0469eb3a-02eb-4b41-b189-de20b931fa56@moroto.mountain
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kasan, slub: fix HW_TAGS zeroing with slub_debug

Commit 946fa0dbf2d8 ("mm/slub: extend redzone check to extra allocated
kmalloc space than requested") added precise kmalloc redzone poisoning to
the slub_debug functionality.

However, this commit didn't account for HW_TAGS KASAN fully initializing
the object via its built-in memory initialization feature.  Even though
HW_TAGS KASAN memory initialization contains special memory initialization
handling for when slub_debug is enabled, it does not account for in-object
slub_debug redzones.  As a result, HW_TAGS KASAN can overwrite these
redzones and cause false-positive slub_debug reports.

To fix the issue, avoid HW_TAGS KASAN memory initialization when
slub_debug is enabled altogether.  Implement this by moving the
__slub_debug_enabled check to slab_post_alloc_hook.  Common slab code
seems like a more appropriate place for a slub_debug check anyway.

Link: https://lkml.kernel.org/r/678ac92ab790dba9198f9ca14f405651b97c8502.1688561016.git.andreyknvl@google.com
Fixes: 946fa0dbf2d8 ("mm/slub: extend redzone check to extra allocated kmalloc space than requested")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Will Deacon <will@kernel.org>
Acked-by: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: kasan-dev@googlegroups.com
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kasan: fix type cast in memory_is_poisoned_n

Commit bb6e04a173f0 ("kasan: use internal prototypes matching gcc-13
builtins") introduced a bug into the memory_is_poisoned_n implementation:
it effectively removed the cast to a signed integer type after applying
KASAN_GRANULE_MASK.

As a result, KASAN started failing to properly check memset, memcpy, and
other similar functions.

Fix the bug by adding the cast back (through an additional signed integer
variable to make the code more readable).

Link: https://lkml.kernel.org/r/8c9e0251c2b8b81016255709d4ec42942dcaf018.1688431866.git.andreyknvl@google.com
Fixes: bb6e04a173f0 ("kasan: use internal prototypes matching gcc-13 builtins")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mailmap: add entries for Heiko Stuebner

I am going to lose my vrull.eu address at the end of july, and while
adding it to mailmap I also realised that there are more old addresses
from me dangling, so update .mailmap for all of them.

Link: https://lkml.kernel.org/r/20230704163919.1136784-3-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mailmap: update manpage link

Patch series "Update .mailmap for my work address and fix manpage".

While updating mailmap for the going-away address, I also found that on
current systems the manpage linked from the header comment changed.

And in fact it looks like the git mailmap feature got its own manpage.

This patch (of 2):

On recent systems the git-shortlog manpage only tells people to
    See gitmailmap(5)

So instead of sending people on a scavenger hunt, put that info into the
header directly.  Though keep the old reference around for older systems.

Link: https://lkml.kernel.org/r/20230704163919.1136784-1-heiko@sntech.de
Link: https://lkml.kernel.org/r/20230704163919.1136784-2-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page

commit dd0ff4d12dd2 ("bootmem: remove the vmemmap pages from kmemleak in
put_page_bootmem") fix an overlaps existing problem of kmemleak.  But the
problem still existed when HAVE_BOOTMEM_INFO_NODE is disabled, because in
this case, free_bootmem_page() will call free_reserved_page() directly.

Fix the problem by adding kmemleak_free_part() in free_bootmem_page() when
HAVE_BOOTMEM_INFO_NODE is disabled.

Link: https://lkml.kernel.org/r/20230704101942.2819426-1-liushixin2@huawei.com
Fixes: f41f2ed43ca5 ("mm: hugetlb: free the vmemmap pages associated with each HugeTLB page")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

MAINTAINERS: add linux-next info

Add linux-next info to MAINTAINERS for ease of finding this data.

Link: https://lkml.kernel.org/r/20230704054410.12527-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mailmap: add Markus Schneider-Pargmann

Add my old mail address and update my name.

Link: https://lkml.kernel.org/r/20230628081341.3470229-1-msp@baylibre.com
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

writeback: account the number of pages written back

nr_to_write is a count of pages, so we need to decrease it by the number
of pages in the folio we just wrote, not by 1.  Most callers specify
either LONG_MAX or 1, so are unaffected, but writeback_sb_inodes() might
end up writing 512x as many pages as it asked for.

Dave added:

: XFS is the only filesystem this would affect, right?  AFAIA, nothing
: else enables large folios and uses writeback through
: write_cache_pages() at this point...
:
: In which case, I'd be surprised if much difference, if any, gets
: noticed by anyone.

Link: https://lkml.kernel.org/r/20230628185548.981888-1-willy@infradead.org
Fixes: 793917d997df ("mm/readahead: Add large folio readahead")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: call arch_swap_restore() from do_swap_page()

Commit c145e0b47c77 ("mm: streamline COW logic in do_swap_page()") moved
the call to swap_free() before the call to set_pte_at(), which meant that
the MTE tags could end up being freed before set_pte_at() had a chance to
restore them.  Fix it by adding a call to the arch_swap_restore() hook
before the call to swap_free().

Link: https://lkml.kernel.org/r/20230523004312.1807357-2-pcc@google.com
Link: https://linux-review.googlesource.com/id/I6470efa669e8bd2f841049b8c61020c510678965
Fixes: c145e0b47c77 ("mm: streamline COW logic in do_swap_page()")
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reported-by: Qun-wei Lin <Qun-wei.Lin@mediatek.com>
Closes: https://lore.kernel.org/all/5050805753ac469e8d727c797c2218a9d780d434.camel@mediatek.com/
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org> [6.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

squashfs: fix cache race with migration

Migration replaces the page in the mapping before copying the contents and
the flags over from the old page, so check that the page in the page cache
is really up to date before using it.  Without this, stressing squashfs
reads with parallel compaction sometimes results in squashfs reporting
data corruption.

Link: https://lkml.kernel.org/r/20230629-squashfs-cache-migration-v1-1-d50ebe55099d@axis.com
Fixes: e994f5b677ee ("squashfs: cache partial compressed blocks")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/hugetlb.c: fix a bug within a BUG(): inconsistent pte comparison

The following crash happens for me when running the -mm selftests (below).
Specifically, it happens while running the uffd-stress subtests:

kernel BUG at mm/hugetlb.c:7249!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 3238 Comm: uffd-stress Not tainted 6.4.0-hubbard-github+ #109
Hardware name: ASUS X299-A/PRIME X299-A, BIOS 1503 08/03/2018
RIP: 0010:huge_pte_alloc+0x12c/0x1a0
...
Call Trace:
 <TASK>
 ? __die_body+0x63/0xb0
 ? die+0x9f/0xc0
 ? do_trap+0xab/0x180
 ? huge_pte_alloc+0x12c/0x1a0
 ? do_error_trap+0xc6/0x110
 ? huge_pte_alloc+0x12c/0x1a0
 ? handle_invalid_op+0x2c/0x40
 ? huge_pte_alloc+0x12c/0x1a0
 ? exc_invalid_op+0x33/0x50
 ? asm_exc_invalid_op+0x16/0x20
 ? __pfx_put_prev_task_idle+0x10/0x10
 ? huge_pte_alloc+0x12c/0x1a0
 hugetlb_fault+0x1a3/0x1120
 ? finish_task_switch+0xb3/0x2a0
 ? lock_is_held_type+0xdb/0x150
 handle_mm_fault+0xb8a/0xd40
 ? find_vma+0x5d/0xa0
 do_user_addr_fault+0x257/0x5d0
 exc_page_fault+0x7b/0x1f0
 asm_exc_page_fault+0x22/0x30

That happens because a BUG() statement in huge_pte_alloc() attempts to
check that a pte, if present, is a hugetlb pte, but it does so in a
non-lockless-safe manner that leads to a false BUG() report.

We got here due to a couple of bugs, each of which by itself was not quite
enough to cause a problem:

First of all, before commit c33c794828f2("mm: ptep_get() conversion"), the
BUG() statement in huge_pte_alloc() was itself fragile: it relied upon
compiler behavior to only read the pte once, despite using it twice in the
same conditional.

Next, commit c33c794828f2 ("mm: ptep_get() conversion") broke that
delicate situation, by causing all direct pte reads to be done via
READ_ONCE().  And so READ_ONCE() got called twice within the same BUG()
conditional, leading to comparing (potentially, occasionally) different
versions of the pte, and thus to false BUG() reports.

Fix this by taking a single snapshot of the pte before using it in the
BUG conditional.

Now, that commit is only partially to blame here but, people doing
bisections will invariably land there, so this will help them find a fix
for a real crash.  And also, the previous behavior was unlikely to ever
expose this bug--it was fragile, yet not actually broken.

So that's why I chose this commit for the Fixes tag, rather than the
commit that created the original BUG() statement.

Link: https://lkml.kernel.org/r/20230701010442.2041858-1-jhubbard@nvidia.com
Fixes: c33c794828f2 ("mm: ptep_get() conversion")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: James Houghton <jthoughton@google.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

docs: update ocfs2-devel mailing list address

The ocfs2-devel mailing list has been migrated to the kernel.org
infrastructure, update all related documentation pointers to reflect the
change.

Link: https://lkml.kernel.org/r/20230628013437.47030-3-ailiop@suse.com
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Acked-by: Joseph Qi <jiangqi903@gmail.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

MAINTAINERS: update ocfs2-devel mailing list address

The ocfs2-devel mailing list has been migrated to the kernel.org
infrastructure, update the related entry to reflect the change.

Link: https://lkml.kernel.org/r/20230628013437.47030-2-ailiop@suse.com
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Acked-by: Joseph Qi <jiangqi903@gmail.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: disable CONFIG_PER_VMA_LOCK until its fixed

A memory corruption was reported in [1] with bisection pointing to the
patch [2] enabling per-VMA locks for x86.  Disable per-VMA locks config to
prevent this issue until the fix is confirmed.  This is expected to be a
temporary measure.

[1] https://bugzilla.kernel.org/show_bug.cgi?id=217624
[2] https://lore.kernel.org/all/20230227173632.3292573-30-surenb@google.com

Link: https://lkml.kernel.org/r/20230706011400.2949242-3-surenb@google.com
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://lore.kernel.org/all/dbdef34c-3a07-5951-e1ae-e9c6e3cdf51b@kernel.org/
Reported-by: Jacob Young <jacobly.alt@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217624
Fixes: 0bff0aaea03e ("x86/mm: try VMA lock-based page fault handling first")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Holger Hoffstätte <holger@applied-asynchrony.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

fork: lock VMAs of the parent process when forking

Patch series "Avoid memory corruption caused by per-VMA locks", v4.

A memory corruption was reported in [1] with bisection pointing to the
patch [2] enabling per-VMA locks for x86.  Based on the reproducer
provided in [1] we suspect this is caused by the lack of VMA locking while
forking a child process.

Patch 1/2 in the series implements proper VMA locking during fork.  I
tested the fix locally using the reproducer and was unable to reproduce
the memory corruption problem.

This fix can potentially regress some fork-heavy workloads.  Kernel build
time did not show noticeable regression on a 56-core machine while a
stress test mapping 10000 VMAs and forking 5000 times in a tight loop
shows ~7% regression.  If such fork time regression is unacceptable,
disabling CONFIG_PER_VMA_LOCK should restore its performance.  Further
optimizations are possible if this regression proves to be problematic.

Patch 2/2 disables per-VMA locks until the fix is tested and verified.

This patch (of 2):

When forking a child process, parent write-protects an anonymous page and
COW-shares it with the child being forked using copy_present_pte().
Parent's TLB is flushed right before we drop the parent's mmap_lock in
dup_mmap().  If we get a write-fault before that TLB flush in the parent,
and we end up replacing that anonymous page in the parent process in
do_wp_page() (because, COW-shared with the child), this might lead to some
stale writable TLB entries targeting the wrong (old) page.  Similar issue
happened in the past with userfaultfd (see flush_tlb_page() call inside
do_wp_page()).

Lock VMAs of the parent process when forking a child, which prevents
concurrent page faults during fork operation and avoids this issue.  This
fix can potentially regress some fork-heavy workloads.  Kernel build time
did not show noticeable regression on a 56-core machine while a stress
test mapping 10000 VMAs and forking 5000 times in a tight loop shows ~7%
regression.  If such fork time regression is unacceptable, disabling
CONFIG_PER_VMA_LOCK should restore its performance.  Further optimizations
are possible if this regression proves to be problematic.

Link: https://lkml.kernel.org/r/20230706011400.2949242-1-surenb@google.com
Link: https://lkml.kernel.org/r/20230706011400.2949242-2-surenb@google.com
Fixes: 0bff0aaea03e ("x86/mm: try VMA lock-based page fault handling first")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://lore.kernel.org/all/dbdef34c-3a07-5951-e1ae-e9c6e3cdf51b@kernel.org/
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Closes: https://lore.kernel.org/all/b198d649-f4bf-b971-31d0-e8433ec2a34c@applied-asynchrony.com/
Reported-by: Jacob Young <jacobly.alt@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=3D217624
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Holger Hoffsttte <holger@applied-asynchrony.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

ntb.rst: Fix copy and paste error

It seems the text for the NTB MSI Test Client section was copied from the
NTB Tool Test Client, but was not updated for the new section.  Corrects
the NTB MSI Test Client section text.

Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

ntb_netdev: Fix module_init problem

With both the ntb_transport_init and the ntb_netdev_init_module routines in the
module_init init group, the ntb_netdev_init_module routine can be called before
the ntb_transport_init routine that it depends on is called.  To assure the
proper initialization order put ntb_netdev_init_module in the late_initcall
group.

Fixes runtime errors where the ntb_netdev_init_module call fails with ENODEV.

Signed-off-by: Geoff Levand <geoff@infradead.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

ntb: intel: Remove redundant pci_clear_master

Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;

pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}

pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.

Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>