OSDN Git Service
Paul Mundt [Mon, 7 Nov 2005 08:58:22 +0000 (00:58 -0800)]
[PATCH] sh: SuperHyway support for SH4-202
This adds support for the relatively quirky (ie, not in line with any known
documentation, and amazed it works at all) SuperHyway implementation on
SH4-202. This depends on the earlier SuperHyway patch for multiple block
support and VCR refactoring.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul Mundt [Mon, 7 Nov 2005 08:58:21 +0000 (00:58 -0800)]
[PATCH] superhyway: multiple block support and VCR rework
This extends the API somewhat to allow for platform-specific VCR reading and
writing. Some platforms (like SH4-202) implement the VCR in a split VCRL and
VCRH, but end up being in reverse order or have other quirks that need to be
dealt with, so we add a set of superhyway_ops per-bus to accomodate this.
We also have to extend the per-device resources somewhat, as some devices now
conveniently split control and data blocks. So we allow a platform to
register its set of SuperHyway devices via superhyway_add_devices() with the
control block always ordered as the first resource (as this is the one that
userspace cares about).
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul Mundt [Mon, 7 Nov 2005 08:58:20 +0000 (00:58 -0800)]
[PATCH] sh: Drop deprecated support for custom ramdisk embedding
sh had its own support for embedding ramdisk images in to the kernel binary,
but people are using initramfs for this now, so we drop the ramdisk embedding.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul Mundt [Mon, 7 Nov 2005 08:58:19 +0000 (00:58 -0800)]
[PATCH] sh: Re-add sh to drivers/Makefile
drivers/sh/ got dropped from drivers/Makefile, so add it back in..
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Pantelis Antoniou [Mon, 7 Nov 2005 08:58:17 +0000 (00:58 -0800)]
[PATCH] ppc32: Add CPM1 config option
Kconfig patch needed by fs_enet to work. Works like CONFIG_CPM2.
Cc: Kumar <kumar.gala@freescale.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Matt Porter [Mon, 7 Nov 2005 08:58:16 +0000 (00:58 -0800)]
[PATCH] ppc32: Add missing initrd header on ppc440
This missing initrd header slipped though last time.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Matt Porter [Mon, 7 Nov 2005 08:58:16 +0000 (00:58 -0800)]
[PATCH] ppc32: Remove internal PCI arbiter check on PPC40x
On PPC405GP/GPR it should be possible to enable PCI support, even when the
internal PCI arbiter is disabled (e.g. when using an external PCI
arbiter). The removed code didn't allow this, and also generated a warning
on PPC405EP platforms.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Matt Porter [Mon, 7 Nov 2005 08:58:15 +0000 (00:58 -0800)]
[PATCH] ppc32: cleanup AMCC PPC40x eval boards to support U-Boot
Cleanup PPC40x eval boards (bubinga, walnut and sycamore) to support U-Boot
as bootloader. The OpenBIOS bd_info struct is not used in the kernel
anymore (only U-Boot now).
uImage (U-Boot) tested on walnut, sycamore and bubinga
zImage (OpenBIOS) tested on sycamore, bubinga and ebony
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Roland Dreier [Mon, 7 Nov 2005 08:58:14 +0000 (00:58 -0800)]
[PATCH] ppc32: Add Yucca (440SPe eval board) platform
Add support for AMCC PowerPC 440SPe "Yucca" eval board platform.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Roland Dreier [Mon, 7 Nov 2005 08:58:13 +0000 (00:58 -0800)]
[PATCH] ppc32: Add 440SPe support
Add support for the AMCC PowerPC 440SPe SoC, including PCI Express in root
port mode.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Roland Dreier [Mon, 7 Nov 2005 08:58:12 +0000 (00:58 -0800)]
[PATCH] ppc32: Dump error status for both PLB segments on 440SP
The PowerPC 440SP SoC has two Processor Local Bus (PLB) segments (a
high-throughput segment and a low-latency segment). Fix our PLB register
definitions to cope with this, and add code to dump the status of both
segments when a machine check occurs.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Roland Dreier [Mon, 7 Nov 2005 08:58:11 +0000 (00:58 -0800)]
[PATCH] ppc32: Allow ERPN for early serial to depend on CPU type
The PowerPC 440SPe supports up to 16 GB of RAM, and therefore its IO registers
are at 0x4_xxxx_xxxx instead of being at 0x1_xxxx_xxxx like most other PPC 440
chips. To allow for this, this patch moves the definition of the ERPN used
for mapping UART0 from being hard-coded in the head_44x.S assembly code to
being defined in ibm44x.h.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Lee Nicks [Mon, 7 Nov 2005 08:58:10 +0000 (00:58 -0800)]
[PATCH] ppc32: add watchdog & RTC support for Marvell EV64360BP board
This patch adds watchdog, RTC support for Marvell EV64360BP board.
Signed-off-by: Lee Nicks <allinux@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Stephen Hemminger [Mon, 7 Nov 2005 08:58:09 +0000 (00:58 -0800)]
[PATCH] 3c59x: don't enable scatter/gather w/o checksum support
It is not valid to enable scatter/gather without hardware checksum support
of some kind. (akpm: applies only to the old boomerang cards).
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
John W. Linville [Mon, 7 Nov 2005 08:58:08 +0000 (00:58 -0800)]
[PATCH] 3c59x: enable use of memory-mapped PCI I/O
Add capability for 3c59x driver to use memory-mapped PCI I/O resources.
This may improve performance for those devices so equipped. This will be
the default behaviour for IS_CYCLONE and IS_TORNADO devices. Additionally,
it can be enabled/disabled individually for up to MAX_UNITS number of
devices via the use_mmio module option or for all units via the
global_use_mmio option. The use_mmio option overrides the global_use_mmio
option for those devices specified.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
John W. Linville [Mon, 7 Nov 2005 08:58:08 +0000 (00:58 -0800)]
[PATCH] 3c59x: correct rx_dropped counting
Only increment rx_dropped in case of lack of resources (i.e. not for
frames with errors).
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
John W. Linville [Mon, 7 Nov 2005 08:58:07 +0000 (00:58 -0800)]
[PATCH] 3c59x: support ETHTOOL_GPERMADDR
Add support for ETHTOOL_GPERMADDR to 3c59x.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
John W. Linville [Mon, 7 Nov 2005 08:58:06 +0000 (00:58 -0800)]
[PATCH] 3c59x: fix some grammar in module parameter descriptions
Correct several (apparently cut & paste) grammatical typos in module
parameter descriptions. They seem to have originated as copies of the
description for "global_options".
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
John W. Linville [Mon, 7 Nov 2005 08:58:06 +0000 (00:58 -0800)]
[PATCH] 3c59x: cleanup init of module parameter arrays
Beautify the array initilizations for the module parameters.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
John W. Linville [Mon, 7 Nov 2005 08:58:05 +0000 (00:58 -0800)]
[PATCH] 3c59x: bounds checking for hw_checksums
Add bounds checking to usage of hw_checksums module parameter array.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Tommy Christensen [Mon, 7 Nov 2005 08:58:04 +0000 (00:58 -0800)]
[PATCH] 3c59x: avoid blindly reading link status twice
In order to spare some I/O operations, be more intelligent about when to
read from the PHY.
Pointed out by Bogdan Costescu.
Signed-off-by: Tommy S. Christensen <tommy.christensen@tpack.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Neil Horman [Mon, 7 Nov 2005 08:58:03 +0000 (00:58 -0800)]
[PATCH] 3c59x: cleanup of mdio_read routines to use MII_* macros
Clean up mdio_read routines in 3c59x.c to use the MII_* macros defined in
include/linux/mii.h
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
John W. Linville [Mon, 7 Nov 2005 08:58:02 +0000 (00:58 -0800)]
[PATCH] 3c59x: convert to use of pci_iomap API
Convert 3c59x driver to use pci_iomap API. This makes it easier to enable
the use of memory-mapped PCI I/O resources.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Manfred Spraul [Mon, 7 Nov 2005 08:58:02 +0000 (00:58 -0800)]
[PATCH] slab: Use same schedule timeout for all cpus in cache_reap
Chen noticed that cache_reap uses REAPTIMEOUT_CPUC+smp_processor_id() as
the timeout for rescheduling.
The "+smp_processor_id()" part is wrong, the timeout should be identical
for all cpus: start_cpu_timer already adds a cpu dependant offset to avoid
any clustering.
The attached patch removes smp_processor_id().
Signed-Off-By: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Pekka J Enberg [Mon, 7 Nov 2005 08:58:01 +0000 (00:58 -0800)]
[PATCH] mm: rename kmem_cache_s to kmem_cache
This patch renames struct kmem_cache_s to kmem_cache so we can start using
it instead of kmem_cache_t typedef.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Mon, 7 Nov 2005 08:58:00 +0000 (00:58 -0800)]
[PATCH] slab: don't BUG on duplicated cache
slab presently goes BUG if someone tries to register an already-registered
cache.
But this can happen if the user accidentally loads a module which is already
statically linked into the kernel. Nuking the kernel is rather a harsh
reaction.
Change it into a warning, and just fail the kmem_cache_alloc() attempt. If
the module is well-behaved, the modprobe will fail and all is well.
Notes:
- Swaps the ranking of cache_chain_sem and lock_cpu_hotplug(). Doesn't seem
important.
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Mon, 7 Nov 2005 08:57:59 +0000 (00:57 -0800)]
[PATCH] posix-timers `unlikely' rejig
!unlikely(expr) hurts my brain. likely(!expr) is more straightforward.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Benjamin Herrenschmidt [Mon, 7 Nov 2005 08:57:58 +0000 (00:57 -0800)]
[PATCH] ppc: Fix ppc32 build after 64K pages
Oops, some last minute changes caused the 64K pages patch to break ppc32
build, this fixes it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Benjamin Herrenschmidt [Mon, 7 Nov 2005 08:57:58 +0000 (00:57 -0800)]
[PATCH] ppc64: Fix zImage boot
The zImage wrapper has a bug where it doesn't claim() the memory for the
kernel properly, it forgets to take into account the offset between the ELF
header and the kernel itself. This results on some machines, like G5s,
into a kernel that crashes at boot when clearing the BSS.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hugh Dickins [Mon, 7 Nov 2005 08:57:57 +0000 (00:57 -0800)]
[PATCH] Suppress split ptlock on arches which may use one page for multiple page tables
Suppress split ptlock on arches which may use one page for multiple page
tables. Reconsider what better to do (particularly on ppc64) later on.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Olof Johansson [Mon, 7 Nov 2005 08:57:55 +0000 (00:57 -0800)]
[PATCH] POWERPC/PPC64: Fix CONFIG_SMP=n build for ppc64
Two CONFIG_SMP=n build fixes due to missing <asm/smp.h> includes.
Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
John W. Linville [Mon, 7 Nov 2005 08:57:54 +0000 (00:57 -0800)]
[PATCH] ia64: re-implement dma_get_cache_alignment to avoid EXPORT_SYMBOL
The current ia64 implementation of dma_get_cache_alignment does not work
for modules because it relies on a symbol which is not exported. Direct
access to a global is a little ugly anyway, so this patch re-implements
dma_get_cache_alignment in a manner similar to what is currently used for
x86_64.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Yuri Vasilevski [Mon, 7 Nov 2005 08:57:53 +0000 (00:57 -0800)]
[PATCH] typo correction for fix-build-on-nls-free-systems
A typo fix for fix-build-on-nls-free-systems.patch that caused all systems
to be detected as not having NLS.
Signed-off-by: Yuri Vasilevski <yvasilev@duke.math.cinvestav.mx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
David Gibson [Mon, 7 Nov 2005 08:57:52 +0000 (00:57 -0800)]
[PATCH] ppc64: Fix bug in SLB miss handler for hugepages
This patch, however, should be applied on top of the 64k-page-size patch to
fix some problems with hugepage (some pre-existing, another introduced by
this patch).
The patch fixes a bug in the SLB miss handler for hugepages on ppc64
introduced by the dynamic hugepage patch (commit id
c594adad5653491813959277fb87a2fef54c4e05) due to a misunderstanding of the
srd instruction's behaviour (mea culpa). The problem arises when a 64-bit
process maps some hugepages in the low 4GB of the address space (unusual).
In this case, as well as the 256M segment in question being marked for
hugepages, other segments at 32G intervals will be incorrectly marked for
hugepages.
In the process, this patch tweaks the semantics of the hugepage bitmaps to
be more sensible. Previously, an address below 4G was marked for hugepages
if the appropriate segment bit in the "low areas" bitmask was set *or* if
the low bit in the "high areas" bitmap was set (which would mark all
addresses below 1TB for hugepage). With this patch, any given address is
governed by a single bitmap. Addresses below 4GB are marked for hugepage
if and only if their bit is set in the "low areas" bitmap (256M
granularity). Addresses between 4GB and 1TB are marked for hugepage iff
the low bit in the "high areas" bitmap is set. Higher addresses are marked
for hugepage iff their bit in the "high areas" bitmap is set (1TB
granularity).
To avoid conflicts, this patch must be applied on top of BenH's pending
patch for 64k base page size [0]. As such, this patch also addresses a
hugepage problem introduced by that patch. That patch allows hugepages of
1MB in size on hardware which supports it, however, that won't work when
using 4k pages (4 level pagetable), because in that case hugepage PTEs are
stored at the PMD level, and each PMD entry maps 2MB. This patch simply
disallows hugepages in that case (we can do something cleverer to re-enable
them some other day).
Built, booted, and a handful of hugepage related tests passed on POWER5
LPAR (both ARCH=powerpc and ARCH=ppc64).
[0] http://gate.crashing.org/~benh/ppc64-64k-pages.diff
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Mon, 7 Nov 2005 00:59:14 +0000 (16:59 -0800)]
Merge /pub/scm/linux/kernel/git/sam/kbuild
Linus Torvalds [Mon, 7 Nov 2005 00:58:38 +0000 (16:58 -0800)]
Merge kernel.org:/home/rmk/linux-2.6-drvmodel
Linus Torvalds [Mon, 7 Nov 2005 00:58:11 +0000 (16:58 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Mon, 7 Nov 2005 00:57:34 +0000 (16:57 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-serial
Benjamin Herrenschmidt [Mon, 7 Nov 2005 00:06:55 +0000 (11:06 +1100)]
[PATCH] ppc64: support 64k pages
Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel
base page size to 64K. The resulting kernel still boots on any
hardware. On current machines with 4K pages support only, the kernel
will maintain 16 "subpages" for each 64K page transparently.
Note that while real 64K capable HW has been tested, the current patch
will not enable it yet as such hardware is not released yet, and I'm
still verifying with the firmware architects the proper to get the
information from the newer hypervisors.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Russell King [Sun, 6 Nov 2005 21:41:08 +0000 (21:41 +0000)]
[ARM] Fix /proc/cpuinfo format for ARM SMP
glibc expects to count lines beginning with "processor" to determine
the number of processors, not lines beginning with "Processor". So,
give glibc the format it expects.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Sun, 6 Nov 2005 19:49:21 +0000 (19:49 +0000)]
[ARM] Don't call dump_cpu_info unless we're booting
We don't want to call dump_cpu_info() from cpu_init() after boot since
it produces a lot of unnecessary noise - since cpu_init() gets called
on resume and hotplug cpu insertion events.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Sun, 6 Nov 2005 19:47:04 +0000 (19:47 +0000)]
[ARM] Fix second missing declaration of cache_is_vivt()
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Sun, 6 Nov 2005 15:46:57 +0000 (15:46 +0000)]
[ARM] Fix missing declaration of cache_is_vivt()
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Sun, 6 Nov 2005 15:45:00 +0000 (15:45 +0000)]
[ARM] Fix another use of // as a comment
// disagrees with ld's script parsing ability. Don't use it.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Richard Purdie [Sun, 6 Nov 2005 15:03:23 +0000 (15:03 +0000)]
[ARM] 3113/1: PXA: Allow machines to override (and also reuse) pxa pm functions
Patch from Richard Purdie
Update the PXA pm.c file to allow machines (such as the Sharp
Zaurus) to override the standard pm functions but reuse/wrap them
where needed.
The init call is made slightly earlier to give machine code an init
level to override them in removing any race.
Signed-off-by: Richard Purdie
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Nicolas Pitre [Sun, 6 Nov 2005 14:42:37 +0000 (14:42 +0000)]
[ARM] 3115/1: small optimizations to exception vector entry code
Patch from Nicolas Pitre
Since we know the value of cpsr on entry, we can replace the bic+orr with
a single eor. Also remove a possible result delay (at least on XScale).
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Lennert Buytenhek [Sun, 6 Nov 2005 14:34:13 +0000 (14:34 +0000)]
[ARM] 3114/1: use ixp2000_reg_wrb in ixp2000 uengine loader
Patch from Lennert Buytenhek
Make the uengine loader use ixp2000_reg_wrb in the right places.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Alessandro Zummo [Sun, 6 Nov 2005 14:34:12 +0000 (14:34 +0000)]
[ARM] 3089/1: ixp4xx AHB/PCI endianness fix
Patch from Alessandro Zummo
This patch fixes AHB/PCI endianness problems when the
processor is in little-endian mode.
The patch configures the CSR register closely following the directives
in [1], paragraph 4.1, page 19.
According to the considerations in [1], page 11, while the AHB bus
supports both endian modes, on the IXP4XX it always uses big-endian.
The PCI bus is connected to the South AHB. A wrong setting in the CSR
register will thus cause a malfunctional PCI bus.
A schematic diagram of the bus interconnections on the IXP4XX
can be found in [1], page 18.
The patch has been verified to work on the NSLU2 in
both LE and BE modes.
The author is Peter Korsgaard.
[1] Intel® IXP4XX Product Line of Network Processors and IXC1100
Control Plane Processor:
Understanding Big Endian and Little Endian Modes
http://www.intel.com/design/network/applnots/
25423701.pdf
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Dirk Opfer [Sun, 6 Nov 2005 14:27:52 +0000 (14:27 +0000)]
[ARM] 3088/1: PXA: Add machine support for the Sharp SL-6000x series of PDAs
Patch from Dirk Opfer
This patch adds basic machine support for the Sharp SL-6000x (Tosa) PDAs.
Signed-off-by: Dirk Opfer
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Sam Ravnborg [Sun, 6 Nov 2005 10:05:21 +0000 (11:05 +0100)]
kconfig: fix xconfig on fedora 2 & 3 (x86_64)
From: Than Ngo <than@redhat.com>
qt as installed on fedora core (2 and 3) does not work with vanilla
kernel. The linker fails to locate the qt lib:
Actual Results: # make xconfig
HOSTLD scripts/kconfig/qconf
/usr/bin/ld: cannot find -lqt
collect2: ld returned 1 exit status
Than Ngo has provided following fix for the bug.
Cc: Than Ngo <than@redhat.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Russell King [Sun, 30 Oct 2005 21:42:11 +0000 (22:42 +0100)]
[PATCH] kbuild: permanently fix kernel configuration include mess
Include autoconf.h into every kernel compilation via the gcc command line
using -imacros. This ensures that we have the kernel configuration
included from the start, rather than relying on each file having #include
<linux/config.h> as appropriate. History has shown that this is something
which is difficult to get right.
Since we now include the kernel configuration automatically, make
configcheck becomes meaningless, so remove it.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Pantelis Antoniou [Sun, 6 Nov 2005 09:07:03 +0000 (09:07 +0000)]
[SERIAL] Support Au1x00 8250 UARTs using the generic 8250 driver.
The offsets of the registers are in a different place, and
some parts cannot handle a full set of modem control signals.
Signed-off-by: Pantelis Antoniou <pantelis@embeddedalley.ocm>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Bart Oldeman [Sat, 5 Nov 2005 23:54:07 +0000 (12:54 +1300)]
[PATCH] reset tss->io_bitmap_owner in sys_ioperm()
my patch "x86: initialise tss->io_bitmap_owner to something" (commit ID
d5cd4aadd3d220afac8e3e6d922e333592551f7d) introduced a problem with a
program (DOSEMU) that called ioperm after already doing some port i/o.
The problem is that a process switch return causes tss->io_bitmap_base
to be set to IO_BITMAP_OFFSET so that the fault (that *really* sets the
io bitmap) never triggers.
This fixes that regression.
Signed-off-by: Bart Oldeman <bartoldeman@users.sourceforge.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Samuel Thibault [Sat, 5 Nov 2005 21:19:50 +0000 (22:19 +0100)]
[PATCH] Set the vga cursor even when hidden
Some visually impaired people use hardware devices which directly read
the vga screen. When newt for instance asks to hide the cursor for
better visual aspect, the kernel puts the vga cursor out of the screen,
so that the cursor position can't be read by the hardware device. This
is a great loss for such people.
Here is a patch which uses the same technique as CUR_NONE for hiding the
cursor while still moving it.
Mario, you should apply it to the speakup kernel for access floppies
asap. I'll submit a 2.4 patch too.
Signed-off-by: samuel.thibault@ens-lyon.org
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Russell King [Sat, 5 Nov 2005 21:22:39 +0000 (21:22 +0000)]
[DRIVER MODEL] Fix sgivwfb
Statically allocated devices in module data is a potential cause
of oopsen. The device may be in use by a userspace process, which
will keep a reference to the device. If the module is unloaded,
the module data will be freed. Subsequent use of the platform
device will cause a kernel oops.
Use generic platform device allocation/release code in modules.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Russell King [Sat, 5 Nov 2005 21:22:13 +0000 (21:22 +0000)]
[DRIVER MODEL] Fix gbefb
Statically allocated devices in module data is a potential cause
of oopsen. The device may be in use by a userspace process, which
will keep a reference to the device. If the module is unloaded,
the module data will be freed. Subsequent use of the platform
device will cause a kernel oops.
Use generic platform device allocation/release code in modules.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Russell King [Sat, 5 Nov 2005 21:21:38 +0000 (21:21 +0000)]
[DRIVER MODEL] Fix arcfb
Release code in driver modules is a potential cause of oopsen.
The device may be in use by a userspace process, which will keep
a reference to the device. If the module is unloaded, the module
text will be freed. Subsequently, when the last reference is
dropped, the release code will be called, which no longer exists.
Use generic platform device allocation/release code in modules.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Russell King [Sat, 5 Nov 2005 21:21:10 +0000 (21:21 +0000)]
[DRIVER MODEL] Fix macsonic
Release code in driver modules is a potential cause of oopsen.
The device may be in use by a userspace process, which will keep
a reference to the device. If the module is unloaded, the module
text will be freed. Subsequently, when the last reference is
dropped, the release code will be called, which no longer exists.
Use generic platform device allocation/release code in modules.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Russell King [Sat, 5 Nov 2005 21:20:47 +0000 (21:20 +0000)]
[DRIVER MODEL] Fix jazzsonic
Release code in driver modules is a potential cause of oopsen.
The device may be in use by a userspace process, which will keep
a reference to the device. If the module is unloaded, the module
text will be freed. Subsequently, when the last reference is
dropped, the release code will be called, which no longer exists.
Use generic platform device allocation/release code in modules.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Russell King [Sat, 5 Nov 2005 21:20:21 +0000 (21:20 +0000)]
[DRIVER MODEL] Fix depca
Release code in driver modules is a potential cause of oopsen.
The device may be in use by a userspace process, which will keep
a reference to the device. If the module is unloaded, the module
text will be freed. Subsequently, when the last reference is
dropped, the release code will be called, which no longer exists.
Use generic platform device allocation/release code in modules.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Russell King [Sat, 5 Nov 2005 21:19:33 +0000 (21:19 +0000)]
[DRIVER MODEL] Improved dynamically allocated platform_device interface
Re-jig the simple platform device support to allow private data
to be attached to a platform device, as well as allowing the
parent device to be set.
Example usage:
pdev = platform_device_alloc("mydev", id);
if (pdev) {
err = platform_device_add_resources(pdev, &resources,
ARRAY_SIZE(resources));
if (err == 0)
err = platform_device_add_data(pdev, &platform_data,
sizeof(platform_data));
if (err == 0)
err = platform_device_add(pdev);
} else {
err = -ENOMEM;
}
if (err)
platform_device_put(pdev);
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Torvalds [Sat, 5 Nov 2005 20:04:02 +0000 (12:04 -0800)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6
Matt Porter [Wed, 2 Nov 2005 23:13:06 +0000 (16:13 -0700)]
[PATCH] phy address mask support for generic phy layer
Adds a phy_mask field to struct mii_bus and uses it. This field
indicates each phy address to be ignored when probing the mdio bus.
This support is needed for the fs_enet and ibm_emac drivers to be
converted to the generic phy layer among other drivers. Many systems
lock up on probing certain phy addresses or probing doesn't return
0xffff when nothing is found at the address. A new driver I'm
working on also makes use of this mask.
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Don Fry [Tue, 1 Nov 2005 21:13:35 +0000 (13:13 -0800)]
[PATCH] pcnet32: Prevent hang with 79c976
Some boards using the 79c976 pcnet32 chip will hang the system if the
ethtool --register-dump is performed with the device operational. The
request to read bcr30 is retried by the PCI device infinitely without
returning data, hanging the system.
Tested ia32 and ppc64.
Signed-off-by: Don Fry <brazilnut@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Don Fry [Tue, 1 Nov 2005 20:50:57 +0000 (12:50 -0800)]
[PATCH] pcnet32: AT2700/2701 and Bugzilla 2699 & 4551
This patch is a better fix for Allied Telesyn 2700/2701 FX boards than
the change made in early January this year. It allows the user to
select the speed/duplex via module_param, but if no selection is made,
forces the speed to 100 FD. It fixes both Bugzilla bugs 2669 and 4551.
Tested ia32 and ppc64 by myself, and by the originator of bug 2669.
Signed-off-by: Don Fry <brazilnut@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Don Fry [Tue, 1 Nov 2005 20:04:33 +0000 (12:04 -0800)]
[PATCH] pcnet32: show name of failing device
Display the name eth%d or pci_name() of device which fails to allocate
memory. When changing ring size via ethtool, it also releases the
lock before returning on error. Added comment that the caller of
pcnet32_alloc_ring must call pcnet32_free_ring on error, to avoid leak.
Tested ia32 by forcing allocation errors.
Signed-off-by: Don Fry <brazilnut@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Ravinandan Arakali [Tue, 1 Nov 2005 20:24:25 +0000 (15:24 -0500)]
[PATCH] S2io: Updated documentation
Hi,
This patch provides updated documentation on the Neterion(S2io) driver.
Please review the patch.
Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Ananda Raju [Mon, 31 Oct 2005 21:55:31 +0000 (16:55 -0500)]
[PATCH] S2io: Multi buffer mode support
Hi,
This patch provides dynamic two buffer-mode and 3 buffer-mode options.
Previously 2 buffer-mode was compilation option. Now with this patch applied
one can load driver in 2 buffer-mode with module-load parameter
ie.
#insmod s2io.ko rx_ring_mode=2
This patch also provides 3 buffer-mode which provides header separation
functionality. In 3 buffer-mode skb->data will have L2/L3/L4 headers and
"skb_shinfo(skb)->frag_list->data" will have have L4 payload.
one can load driver in 3 buffer-mode with same above module-load parameter
ie.
#insmod s2io.ko rx_ring_mode=3
Please review the patch.
Signed-off-by: Ananda Raju <ananda.raju@neterion.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Gabriel A. Devenyi [Fri, 4 Nov 2005 00:30:47 +0000 (19:30 -0500)]
[PATCH] drivers/net/wireless/airo.c unsigned comparason
fid is declared as a u32 (unsigned int), and then a few lines later, it is checked for a value < 0, which is clearly useless.
In the two locations this function is used, in one it is *explicitly* given a negative number, which would be ignored with the
current definition.
Thanks to LinuxICC (http://linuxicc.sf.net).
Signed-off-by: Gabriel A. Devenyi <ace@staticwave.ca>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Jeff Garzik [Sat, 5 Nov 2005 19:38:55 +0000 (14:38 -0500)]
Merge branch 'master'
Tejun Heo [Sat, 5 Nov 2005 19:29:01 +0000 (14:29 -0500)]
[libata] restore sg on DMA mapping failure
Linus Torvalds [Sat, 5 Nov 2005 18:31:35 +0000 (10:31 -0800)]
Merge /linux/kernel/git/jejb/scsi-for-linus-2.6
Linus Torvalds [Sat, 5 Nov 2005 17:47:46 +0000 (09:47 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-mmc
Alan Stern [Fri, 4 Nov 2005 19:44:41 +0000 (14:44 -0500)]
[SCSI] sd: Fix refcounting
Currently the driver takes a reference only for requests coming by way
of the gendisk, not for requests coming by way of the struct device or
struct scsi_device. Such requests can arrive in the rescan, flush,
and shutdown pathways.
The patch also makes the scsi_disk keep a reference to the underlying
scsi_device, and it erases the scsi_device's pointer to the scsi_disk
when the scsi_device is removed (since the pointer should no longer be
used).
This resolves Bugzilla entry #5237.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Pierre Ossman [Sat, 5 Nov 2005 10:36:35 +0000 (10:36 +0000)]
[MMC] Use controller id instead of driver name for printks
The printks that aren't for debugging should use the name of the controller,
not the driver name. Multiple MMC controllers aren't that common today, but
this is the right way to do things.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Adrian Bunk [Sat, 5 Nov 2005 10:20:56 +0000 (10:20 +0000)]
[ARM] Documentation/arm/README: small update
- egcs is not supported by kernel 2.6
- gcc 3.3 seems to be a good choice on ARM
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Pierre Ossman [Sat, 5 Nov 2005 10:16:50 +0000 (10:16 +0000)]
[MMC] Fix chip config in wbsd
There is a broken if clause in the wbsd driver that can cause the
driver to try and configure the chip even though none is found. This
results in i/o on invalid ports.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
James Bottomley [Sat, 5 Nov 2005 05:22:55 +0000 (23:22 -0600)]
Fix ips.c compile
It looks like one of the ips patches was missing a closing brace in a
function
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
James Bottomley [Sat, 5 Nov 2005 04:29:52 +0000 (22:29 -0600)]
Merge by Hand
Conflicts in dec_esp.c (Thanks Bacchus), scsi_transport_iscsi.c and
scsi_transport_fc.h
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jeff Garzik [Sat, 5 Nov 2005 03:08:00 +0000 (22:08 -0500)]
[libata] ATAPI pad allocation fixes/cleanup
Use ata_pad_{alloc,free} in two drivers, to factor out common code.
Add ata_pad_{alloc,free} to two other drivers, which needed the padding
but had not been updated.
Jeff Garzik [Sat, 5 Nov 2005 02:39:31 +0000 (21:39 -0500)]
Merge branch 'master'
Calin A. Culianu [Sat, 5 Nov 2005 01:38:04 +0000 (20:38 -0500)]
[PATCH] nvidiafb: Geforce 7800 series support added
This adds support for the Nvidia Geforce 7800 series of cards to the
nvidiafb framebuffer driver. All it does is add the PCI device id for
the 7800, 7800 GTX, 7800 GO, and 7800 GTX GO cards to the module device
table for the nvidiafb.ko driver, so that nvidiafb.ko will actually work
on these cards.
I also added the relevant PCI device ids to linux/pci_ids.h
I tested it on my 7800 GTX here and it works like a charm. I now can
get framebuffer support on this card! Woo hoo!! Nothing like 200x75 text
mode to make your eyes BLEED. ;)
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Sat, 5 Nov 2005 00:32:36 +0000 (16:32 -0800)]
Merge branch 'srp' of /linux/kernel/git/roland/infiniband
Linus Torvalds [Sat, 5 Nov 2005 00:31:54 +0000 (16:31 -0800)]
Merge branch 'for-linus' of /linux/kernel/git/roland/infiniband
Linus Torvalds [Sat, 5 Nov 2005 00:27:50 +0000 (16:27 -0800)]
Merge /linux/kernel/git/paulus/powerpc-merge
Paul Mackerras [Fri, 4 Nov 2005 23:36:59 +0000 (10:36 +1100)]
powerpc: Fix vmlinux.lds.S for 32-bit
We can't currently use asm-ppc/page.h in vmlinux.lds.S, so until
we have a merged page.h, define PAGE_SIZE and KERNELBASE locally.
Also gets rid of some dynamic executable cruft that we had for
32-bit. With -Ttext=$(KERNELBASE) this didn't cause any problem,
but when we changed to putting . = KERNELBASE in the vmlinux.lds.S
this cruft caused the text to get linked at 0xa0 instead of
0xc0000000. Oops.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Fri, 4 Nov 2005 23:33:55 +0000 (10:33 +1100)]
powerpc: Merge smp.c and smp.h
This also moves setup_cpu_maps to setup-common.c (calling it
smp_setup_cpu_maps) and uses it on both 32-bit and 64-bit.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Chuck Lever [Tue, 1 Nov 2005 21:53:32 +0000 (16:53 -0500)]
NFS,SUNRPC,NLM: fix unused variable warnings when CONFIG_SYSCTL is disabled
Fix some dprintk's so that NLM, NFS client, and RPC client compile
cleanly if CONFIG_SYSCTL is disabled.
Test plan:
Compile kernel with CONFIG_NFS enabled and CONFIG_SYSCTL disabled.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Tue, 1 Nov 2005 17:24:48 +0000 (12:24 -0500)]
SUNRPC: allow sunrpc.o to link when CONFIG_SYSCTL is disabled
The sunrpc module should build properly even when CONFIG_SYSCTL is
disabled.
Reported by Jan-Benedict Glaw.
Test plan:
Compile kernel with CONFIG_NFS as a module and built-in, and CONFIG_SYSCTL
enabled and disabled.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Fri, 4 Nov 2005 20:39:36 +0000 (15:39 -0500)]
NFSv4: Teach NFSv4 to cache locks when we hold a delegation
Now that we have a method of dealing with delegation recalls, actually
enable the caching of posix and BSD locks.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Fri, 4 Nov 2005 20:38:11 +0000 (15:38 -0500)]
NFSv4: Recover locks too when returning a delegation
Delegations allow us to cache posix and BSD locks, however when the
delegation is recalled, we need to "flush the cache" and send
the cached LOCK requests to the server.
This patch sets up the mechanism for doing so.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Fri, 4 Nov 2005 20:35:30 +0000 (15:35 -0500)]
NFSv4: Fix recovery of flock() locks.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Fri, 4 Nov 2005 20:35:02 +0000 (15:35 -0500)]
NFSv4: Return any delegations before sillyrenaming the file
I missed this one... Any form of rename will result in a delegation
recall, so it is more efficient to return the one we hold before
trying the rename.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Fri, 4 Nov 2005 20:33:50 +0000 (15:33 -0500)]
NFSv4: Fix the handling of the error NFS4ERR_OLD_STATEID
Ensure that we retry the failed operation...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Fri, 4 Nov 2005 20:33:38 +0000 (15:33 -0500)]
NFSv4: Fix problem with OPEN_DOWNGRADE
RFC 3530 states that for OPEN_DOWNGRADE "The share_access and share_deny
bits specified must be exactly equal to the union of the share_access and
share_deny bits specified for some subset of the OPENs in effect for
current openowner on the current file.
Setattr is currently violating the NFSv4 rules for OPEN_DOWNGRADE in that
it may cause a downgrade from OPEN4_SHARE_ACCESS_BOTH to
OPEN4_SHARE_ACCESS_WRITE despite the fact that there exists no open file
with O_WRONLY access mode.
Fix the problem by replacing nfs4_find_state() with a modified version of
nfs_find_open_context().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Fri, 4 Nov 2005 20:32:58 +0000 (15:32 -0500)]
NFSv4: Fix a race between open() and close()
We must not remove the nfs4_state structure from the inode open lists
before we are in sequence lock.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
David S. Miller [Fri, 4 Nov 2005 19:17:24 +0000 (11:17 -0800)]
[USB]: Make early handoff a final fixup instead of a header one.
At header fixup time, it is not yet legal to ioremap() PCI
device registers, yet that is what this quirk code needs to
do.
Signed-off-by: David S. Miller <davem@davemloft.net>
Oleg Nesterov [Fri, 4 Nov 2005 15:54:30 +0000 (18:54 +0300)]
[PATCH] improve scheduler fairness a bit
Do not transfer remaining time slice to another cpu on process exit.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Russell King [Fri, 4 Nov 2005 18:43:39 +0000 (18:43 +0000)]
[MMC] Response to write commands is R1 nor R1b
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Linus Torvalds [Fri, 4 Nov 2005 18:42:53 +0000 (10:42 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-serial