OSDN Git Service
Paolo Bonzini [Thu, 18 Oct 2012 14:49:25 +0000 (16:49 +0200)]
mirror: implement completion
Switching to the target of the migration is done mostly asynchronously,
and reported to management via the BLOCK_JOB_COMPLETED event; the only
synchronous phase is opening the backing files. bdrv_open_backing_file
can always be done, even for migration of the full image (aka sync:
'full'). In this case, qmp_drive_mirror will create the target disk
with no backing file at all, and bdrv_open_backing_file will be a no-op.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Thu, 18 Oct 2012 14:49:24 +0000 (16:49 +0200)]
qmp: add drive-mirror command
This adds the monitor commands that start the mirroring job.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Thu, 18 Oct 2012 14:49:23 +0000 (16:49 +0200)]
mirror: introduce mirror job
This patch adds the implementation of a new job that mirrors a disk to
a new image while letting the guest continue using the old image.
The target is treated as a "black box" and data is copied from the
source to the target in the background. This can be used for several
purposes, including storage migration, continuous replication, and
observation of the guest I/O in an external program. It is also a
first step in replacing the inefficient block migration code that is
part of QEMU.
The job is possibly never-ending, but it is logically structured into
two phases: 1) copy all data as fast as possible until the target
first gets in sync with the source; 2) keep target in sync and
ensure that reopening to the target gets a correct (full) copy
of the source data.
The second phase is indicated by the progress in "info block-jobs"
reporting the current offset to be equal to the length of the file.
When the job is cancelled in the second phase, QEMU will run the
job until the source is clean and quiescent, then it will report
successful completion of the job.
In other words, the BLOCK_JOB_CANCELLED event means that the target
may _not_ be consistent with a past state of the source; the
BLOCK_JOB_COMPLETED event means that the target is consistent with
a past state of the source. (Note that it could already happen
that management lost the race against QEMU and got a completion
event instead of cancellation).
It is not yet possible to complete the job and switch over to the target
disk. The next patches will fix this and add many refinements to the
basic idea introduced here. These include improved error management,
some tunable knobs and performance optimizations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 23 Jul 2012 13:15:47 +0000 (15:15 +0200)]
block: introduce BLOCK_JOB_READY event
Even for jobs that need to be manually completed, management may want
to take care itself of the completion, not requiring the user to issue
a command to terminate the job. In this case we want to avoid that
they poll us continuously, waiting for completion to become available.
Thus, add a new event that signals the phase switch and the availability
of the block-job-complete command.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Thu, 18 Oct 2012 14:49:21 +0000 (16:49 +0200)]
block: add block-job-complete
While streaming can be dropped as soon as it progressed through the whole
image, mirroring needs to be completed manually for two reasons: 1) so that
management knows exactly when the VM switches to the target; 2) because
for other use cases such as replication, we may leave the operation running
for the whole life of the virtual machine.
Add a new block job command that manually completes background operations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Thu, 18 Oct 2012 14:49:20 +0000 (16:49 +0200)]
block: rename block_job_complete to block_job_completed
The imperative will be used for the QMP command.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Wed, 1 Aug 2012 13:23:44 +0000 (15:23 +0200)]
block: export dirty bitmap information in query-block
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Thu, 18 Oct 2012 14:49:18 +0000 (16:49 +0200)]
block: introduce new dirty bitmap functionality
Assert that write_compressed is never used with the dirty bitmap.
Setting the bits early is wrong, because a coroutine might concurrently
examine them and copy incomplete data from the source.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Thu, 18 Oct 2012 14:49:17 +0000 (16:49 +0200)]
block: add bdrv_open_backing_file
Mirroring runs without the backing file so that it can be copied outside
QEMU. However, we need to add it at the time the job is completed and
QEMU switches to the target. Factor out the common bits of opening an
image and completing a mirroring operation.
The new function does not assume that the file is closed immediately after
it returns failure, so it keeps the BDRV_O_NO_BACKING flag up-to-date.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Thu, 18 Oct 2012 14:49:16 +0000 (16:49 +0200)]
block: add bdrv_query_stats
qmp_query_blockstat cannot have errors, remove the Error argument and
create a new public function bdrv_query_stats out of it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Thu, 18 Oct 2012 14:49:15 +0000 (16:49 +0200)]
block: add bdrv_query_info
Extract it out of the implementation of "info block".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Corey Bryant [Thu, 18 Oct 2012 19:19:34 +0000 (15:19 -0400)]
qemu-config: Add new -add-fd command line option
This option can be used for passing file descriptors on the
command line. It mirrors the existing add-fd QMP command which
allows an fd to be passed to QEMU via SCM_RIGHTS and added to an
fd set.
This can be combined with commands such as -drive to link file
descriptors in an fd set to a drive:
qemu-kvm -add-fd fd=3,set=2,opaque="rdwr:/path/to/file"
-add-fd fd=4,set=2,opaque="rdonly:/path/to/file"
-drive file=/dev/fdset/2,index=0,media=disk
This example adds dups of fds 3 and 4, and the accompanying opaque
strings to the fd set with ID=2. qemu_open() already knows how
to handle a filename of this format. qemu_open() searches the
corresponding fd set for an fd and when it finds a match, QEMU
goes on to use a dup of that fd just like it would have used an
fd that it opened itself.
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Corey Bryant [Thu, 18 Oct 2012 19:19:33 +0000 (15:19 -0400)]
monitor: Prevent removing fd from set during init
If an fd is added to an fd set via the command line, and it is not
referenced by another command line option (ie. -drive), then clean
it up after QEMU initialization is complete.
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Corey Bryant [Thu, 18 Oct 2012 19:19:32 +0000 (15:19 -0400)]
monitor: Enable adding an inherited fd to an fd set
qmp_add_fd() gets an fd that was received over a socket with
SCM_RIGHTS and adds it to an fd set. This patch adds support
that will enable adding an fd that was inherited on the
command line to an fd set.
Note: All of the code added to monitor_fdset_add_fd(), with the
exception of the error path for non-valid fdset-id, is code motion
from qmp_add_fd().
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Corey Bryant [Thu, 18 Oct 2012 19:19:31 +0000 (15:19 -0400)]
monitor: Allow add-fd to any specified fd set
The first call to add an fd to an fd set was previously not
allowed to choose the fd set ID. The ID was generated as
the first available and ensuing calls could add more fds by
specifying the fd set ID. This change allows users to
choose the fd set ID on the first call.
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Luiz Capitulino [Wed, 17 Oct 2012 19:45:25 +0000 (16:45 -0300)]
block: bdrv_create(): don't leak cco.filename on error
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kashyap Chamarthy [Thu, 18 Oct 2012 05:55:34 +0000 (11:25 +0530)]
qemu-img: document 'info --backing-chain'
Signed-off-by: Kashyap Chamarthy <kashyap.cv@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Wed, 17 Oct 2012 12:02:32 +0000 (14:02 +0200)]
qemu-iotests: Add 043 backing file chain infinite loop test
This new test verifies that qemu-img info --backing-chain safely aborts
when an image file has a backing file infinite loop.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Wed, 17 Oct 2012 12:02:31 +0000 (14:02 +0200)]
qemu-img: Add --backing-chain option to info command
The qemu-img info --backing-chain option enumerates the backing file
chain. For example, for base.qcow2 <- snap1.qcow2 <- snap2.qcow2 the
output becomes:
$ qemu-img info --backing-chain snap2.qcow2
image: snap2.qcow2
file format: qcow2
virtual size: 100M (
104857600 bytes)
disk size: 196K
cluster_size: 65536
backing file: snap1.qcow2
backing file format: qcow2
image: snap1.qcow2
file format: qcow2
virtual size: 100M (
104857600 bytes)
disk size: 196K
cluster_size: 65536
backing file: base.qcow2
backing file format: qcow2
image: base.qcow2
file format: qcow2
virtual size: 100M (
104857600 bytes)
disk size: 136K
cluster_size: 65536
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jeff Cody [Tue, 16 Oct 2012 19:49:12 +0000 (15:49 -0400)]
qemu-iotests: add relative backing file tests for block-commit (040)
The previous block commit used absolute filenames for all block-commit
images and commands; this adds relative filenames for the same tests.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jeff Cody [Tue, 16 Oct 2012 19:49:10 +0000 (15:49 -0400)]
block: in commit, determine base image from the top image
This simplifies some code and error checking, and also fixes a bug.
bdrv_find_backing_image() should only be passed absolute filenames,
or filenames relative to the chain. In the QMP message handler for
block commit, when looking up the base do so from the determined top
image, so we know it is reachable from top.
Some of the error messages put out by block-commit have changed
slightly, which causes 2 tests cases for block-commit to fail.
This patch updates the test cases to look for the correct error
output.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jeff Cody [Tue, 16 Oct 2012 19:49:09 +0000 (15:49 -0400)]
block: make bdrv_find_backing_image compare canonical filenames
Currently, bdrv_find_backing_image compares bs->backing_file with
what is passed in as a backing_file name. Mismatches may occur,
however, when bs->backing_file and backing_file are not both
absolute or relative.
Use path_combine() to make sure any relative backing filenames are
relative to the current image filename being searched, and then use
realpath() to make all comparisons based on absolute filenames.
If either backing_file or bs->backing_file is determine to be a
protocol, then no filename normalization is performed.
This also changes bdrv_find_backing_image to no longer be recursive,
but iterative.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alex Bligh [Tue, 16 Oct 2012 12:46:18 +0000 (13:46 +0100)]
qemu-img rebase: use empty string to rebase without backing file
This patch allows an empty filename to be passed as the new base image name
for qemu-img rebase to mean base the image on no backing file (i.e.
independent of any backing file). According to Eric Blake, qemu-img rebase
already supports this when '-u' is used; this adds support when -u is not
used.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jeff Cody [Mon, 15 Oct 2012 20:58:02 +0000 (16:58 -0400)]
qmp: fix __accept() in qmp.py
In QEMUMonitorProtocol, commit
e9d17b6 removed the __sockfile creation
from __negotiate_capabilities(), which breaks _accept(). This causes
failures in qemu-io python based tests (i.e. tests 030 and 040).
This patch creates the sockfile in __accept() as well.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 12 Oct 2012 12:24:42 +0000 (14:24 +0200)]
qemu-iotests: Test qemu-img operation on zero size image
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Kevin Wolf [Fri, 12 Oct 2012 12:29:18 +0000 (14:29 +0200)]
qemu-img: Fix division by zero for zero size images
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Avi Kivity [Tue, 23 Oct 2012 10:30:10 +0000 (12:30 +0200)]
Rename target_phys_addr_t to hwaddr
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific). Replace it with a finger-friendly,
standards conformant hwaddr.
Outstanding patchsets can be fixed up with the command
git rebase -i --exec 'find -name "*.[ch]"
| xargs s/target_phys_addr_t/hwaddr/g' origin
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Mon, 22 Oct 2012 19:49:18 +0000 (14:49 -0500)]
Merge remote-tracking branch 'qemu-kvm/memory/urgent' into staging
* qemu-kvm/memory/urgent:
memory: abort if a memory region is destroyed during a transaction
i440fx: avoid destroying memory regions within a transaction
memory: Make eventfd adhere to device endianness
Anthony Liguori [Mon, 22 Oct 2012 19:48:23 +0000 (14:48 -0500)]
Merge remote-tracking branch 'awilliam/tags/vfio-pci-for-qemu-
20121017.0' into staging
* awilliam/tags/vfio-pci-for-qemu-
20121017.0:
vfio-pci: Mark non-migratable
vfio-pci: Fix debug build
Gerd Hoffmann [Wed, 17 Oct 2012 07:54:25 +0000 (09:54 +0200)]
usb-serial: only expose device in guest when the chardev is open
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Wed, 17 Oct 2012 07:54:24 +0000 (09:54 +0200)]
usb-serial: don't magically zap chardev on umplug
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Wed, 17 Oct 2012 07:54:23 +0000 (09:54 +0200)]
serial: add pci-serial documentation
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Wed, 17 Oct 2012 07:54:22 +0000 (09:54 +0200)]
serial: add 2x + 4x pci variant
Add multiport serial card implementation, with two variants, one
featuring two and one featuring four ports.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Wed, 17 Oct 2012 07:54:21 +0000 (09:54 +0200)]
serial: add windows inf file for the pci card to docs
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Wed, 17 Oct 2012 07:54:20 +0000 (09:54 +0200)]
serial: add pci variant
So we get a hot-pluggable 16550 uart.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Wed, 17 Oct 2012 07:54:19 +0000 (09:54 +0200)]
serial: split serial.c
Split serial.c into serial.c, serial.h and serial-isa.c. While being at
creating a serial.h header file move the serial prototypes from pc.h to
the new serial.h. The latter leads to s/pc.h/serial.h/ in tons of
boards which just want the serial bits from pc.h
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 5 Oct 2012 19:47:57 +0000 (16:47 -0300)]
Call MADV_HUGEPAGE for guest RAM allocations
This makes it possible for QEMU to use transparent huge pages (THP)
when transparent_hugepage/enabled=madvise. Otherwise THP is only
used when it's enabled system wide.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Mon, 22 Oct 2012 18:26:23 +0000 (13:26 -0500)]
Merge remote-tracking branch 'quintela/migration-next-
20121017' into staging
* quintela/migration-next-
20121017: (41 commits)
cpus: create qemu_in_vcpu_thread()
savevm: make qemu_file_put_notify() return errors
savevm: un-export qemu_file_set_error()
block-migration: handle errors with the return codes correctly
block-migration: Switch meaning of return value
block-migration: make flush_blks() return errors
buffered_file: buffered_put_buffer() don't need to set last_error
savevm: Only qemu_fflush() can generate errors
savevm: make qemu_fill_buffer() be consistent
savevm: unexport qemu_ftell()
savevm: unfold qemu_fclose_internal()
savevm: make qemu_fflush() return an error code
savevm: Remove qemu_fseek()
virtio-net: use qemu_get_buffer() in a temp buffer
savevm: unexport qemu_fflush
migration: make migrate_fd_wait_for_unfreeze() return errors
buffered_file: make buffered_flush return the error code
buffered_file: callers of buffered_flush() already check for errors
buffered_file: We can access directly to bandwidth_limit
buffered_file: unfold migrate_fd_close
...
Anthony Liguori [Mon, 22 Oct 2012 18:26:07 +0000 (13:26 -0500)]
Merge remote-tracking branch 'qemu-kvm/memory/dma' into staging
* qemu-kvm/memory/dma: (23 commits)
pci: honor PCI_COMMAND_MASTER
pci: give each device its own address space
memory: add address_space_destroy()
dma: make dma access its own address space
memory: per-AddressSpace dispatch
s390: avoid reaching into memory core internals
memory: use AddressSpace for MemoryListener filtering
memory: move tcg flush into a tcg memory listener
memory: move address_space_memory and address_space_io out of memory core
memory: manage coalesced mmio via a MemoryListener
xen: drop no-op MemoryListener callbacks
kvm: drop no-op MemoryListener callbacks
xen_pt: drop no-op MemoryListener callbacks
vfio: drop no-op MemoryListener callbacks
memory: drop no-op MemoryListener callbacks
memory: provide defaults for MemoryListener operations
memory: maintain a list of address spaces
memory: export AddressSpace
memory: prepare AddressSpace for exporting
xen_pt: use separate MemoryListeners for memory and I/O
...
Avi Kivity [Wed, 3 Oct 2012 15:42:58 +0000 (17:42 +0200)]
pci: honor PCI_COMMAND_MASTER
Currently we ignore PCI_COMMAND_MASTER completely: DMA succeeds even when
the bit is clear.
Honor PCI_COMMAND_MASTER by inserting a memory region into the device's
bus master address space, and tying its enable status to PCI_COMMAND_MASTER.
Tested using
setpci -s 03 COMMAND=3
while a ping was running on a NIC in slot 3. The kernel (Linux) detected
the stall and recovered after the command
setpci -s 03 COMMAND=7
was issued.
Signed-off-by: Avi Kivity <avi@redhat.com>
Avi Kivity [Wed, 3 Oct 2012 15:17:27 +0000 (17:17 +0200)]
pci: give each device its own address space
Accesses from different devices can resolve differently
(depending on bridge settings, iommus, and PCI_COMMAND_MASTER), so
set up an address space for each device.
Currently iommus are expressed outside the memory API, so this doesn't
work if an iommu is present.
Signed-off-by: Avi Kivity <avi@redhat.com>
Avi Kivity [Sun, 7 Oct 2012 10:59:55 +0000 (12:59 +0200)]
memory: add address_space_destroy()
Since address spaces can be created dynamically by device hotplug, they
can also be destroyed dynamically.
Signed-off-by: Avi Kivity <avi@redhat.com>
Avi Kivity [Wed, 3 Oct 2012 14:42:37 +0000 (16:42 +0200)]
dma: make dma access its own address space
Instead of accessing the cpu address space, use an address space
configured by the caller.
Eventually all dma functionality will be folded into AddressSpace,
but we have to start from something.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Avi Kivity [Wed, 3 Oct 2012 14:22:53 +0000 (16:22 +0200)]
memory: per-AddressSpace dispatch
Currently we use a global radix tree to dispatch memory access. This only
works with a single address space; to support multiple address spaces we
make the radix tree a member of AddressSpace (via an intermediate structure
AddressSpaceDispatch to avoid exposing too many internals).
A side effect is that address_space_io also gains a dispatch table. When
we remove all the pre-memory-API I/O registrations, we can use that for
dispatching I/O and get rid of the original I/O dispatch.
Signed-off-by: Avi Kivity <avi@redhat.com>
Avi Kivity [Wed, 3 Oct 2012 14:14:23 +0000 (16:14 +0200)]
s390: avoid reaching into memory core internals
use cpu_physical_memory_is_io() instead.
Signed-off-by: Avi Kivity <avi@redhat.com>
Avi Kivity [Tue, 2 Oct 2012 18:13:51 +0000 (20:13 +0200)]
memory: use AddressSpace for MemoryListener filtering
Using the AddressSpace type reduces confusion, as you can't accidentally
supply the MemoryRegion you're interested in.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Avi Kivity [Tue, 2 Oct 2012 16:54:45 +0000 (18:54 +0200)]
memory: move tcg flush into a tcg memory listener
We plan to make the core listener listen to all address spaces; this
will cause many more flushes than necessary. Prepare for that by
moving the flush into a tcg-specific listener.
Later we can avoid registering the listener if tcg is disabled.
Signed-off-by: Avi Kivity <avi@redhat.com>
Avi Kivity [Tue, 2 Oct 2012 16:49:28 +0000 (18:49 +0200)]
memory: move address_space_memory and address_space_io out of memory core
With this change, memory.c no longer knows anything about special address
spaces, so it is prepared for AddressSpace based DMA.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Avi Kivity [Tue, 2 Oct 2012 16:21:54 +0000 (18:21 +0200)]
memory: manage coalesced mmio via a MemoryListener
Instead of calling a global function on coalesced mmio changes, which
routes the call to kvm if enabled, add coalesced mmio hooks to
MemoryListener and make kvm use that instead.
The motivation is support for multiple address spaces (which means we
we need to filter the call on the right address space) but the result
is cleaner as well.
Signed-off-by: Avi Kivity <avi@redhat.com>
Michael Tokarev [Sun, 21 Oct 2012 18:52:54 +0000 (22:52 +0400)]
fix CONFIG_QEMU_HELPERDIR generation again
commit
38f419f35225 fixed a breakage with CONFIG_QEMU_HELPERDIR
which has been introduced by
8bf188aa18ef7a8. But while techinically
that fix has been correct, all other similar variables are handled
differently. Make it consistent, and let scripts/create_config
expand and capitalize the variable properly like for all other
qemu_*dir variables.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Aurelien Jarno [Tue, 16 Oct 2012 23:28:35 +0000 (01:28 +0200)]
target-sparc: fix FMOVr instruction
Like the MOVr instruction, the FMOVr instruction has the condition
encoded between bits 10 and 12.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Peter Maydell [Thu, 18 Oct 2012 13:11:42 +0000 (14:11 +0100)]
hw/pl031: Use LOG_GUEST_ERROR
Use LOG_GUEST_ERROR rather than hw_error or direct fprintf.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Peter Maydell [Thu, 18 Oct 2012 13:11:41 +0000 (14:11 +0100)]
hw/pl022: Use LOG_UNIMP and LOG_GUEST_ERROR
Use LOG_UNIMP and LOG_GUEST_ERROR where appropriate rather
than hw_error().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Peter Maydell [Thu, 18 Oct 2012 13:11:40 +0000 (14:11 +0100)]
hw/pl011: Use LOG_UNIMP and LOG_GUEST_ERROR
Use the new LOG_UNIMP and LOG_GUEST_ERROR logging types rather
than hw_error().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Peter Maydell [Thu, 18 Oct 2012 13:11:39 +0000 (14:11 +0100)]
hw/pl190: Use LOG_GUEST_ERROR
If the guest attempts an offset to a nonexistent register, just
log this via LOG_GUEST_ERROR rather than killing QEMU with a hw_error.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Peter Maydell [Thu, 18 Oct 2012 13:11:38 +0000 (14:11 +0100)]
hw/pl041: Use LOG_UNIMP
Use the new LOG_UNIMP tracing to report unimplemented
features.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Peter Maydell [Thu, 18 Oct 2012 13:11:37 +0000 (14:11 +0100)]
hw/pl181: Use LOG_UNIMP and LOG_GUEST_ERROR
Rather than a mix of direct printing to stderr and aborting
via hw_error(), use LOG_UNIMP and LOG_GUEST_ERROR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Peter Maydell [Thu, 18 Oct 2012 13:11:36 +0000 (14:11 +0100)]
hw/hw.h: Add include of qemu-log.h
Add an include of qemu-log.h to hw.h, so that device model
code has access to these logging functions without the need
to directly include qemu-log.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Peter Maydell [Thu, 18 Oct 2012 13:11:35 +0000 (14:11 +0100)]
qemu-log: Add new log category for guest bugs
Add a new category for device models to log guest behaviour
which is likely to be a guest bug of some kind (accessing
nonexistent registers, reading 32 bit wide registers with
a byte access, etc). Making this its own log category allows
those who care (mostly guest OS authors) to see the complaints
without bothering most users.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 09:32:31 +0000 (19:32 +1000)]
target-sparc: Remove cpu_tmp0 as a global
Subroutines do their own local temporary management.
Within disas_sparc_insn we limit the existance of the variable
to OP=2 insns, and delay initialization as late as is reasonable
for the specific XOP.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 09:32:30 +0000 (19:32 +1000)]
target-sparc: Make cpu_dst local to OP=2 insns
And initialize it such that it (may) write directly to rd.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 09:32:29 +0000 (19:32 +1000)]
target-sparc: Only use cpu_dst for eventual writes to a gpr
Use cpu_tmp0 for other stuff, like Write Priv Register.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 09:32:28 +0000 (19:32 +1000)]
target-sparc: Remove last uses of cpu_tmp64
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 09:32:27 +0000 (19:32 +1000)]
target-sparc: Remove cpu_tmp64 use from softint insns
The use of "tl" functions and a tmp64 is logically incompatible.
Use cpu_tmp0 instead.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 09:32:26 +0000 (19:32 +1000)]
target-sparc: Don't use a temporary for gen_dest_fpr_D
In all cases we don't have write-before-read problems.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 09:32:25 +0000 (19:32 +1000)]
target-sparc: Remove usage of cpu_tmp64 from most helper functions
Use a locally allocated temporary instead.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 09:32:24 +0000 (19:32 +1000)]
target-sparc: Tidy ldfsr, stfsr
Remove the last uses of cpu_tmp32. Unify the code between sparc64
and sparc32 by using the proper "tl" functions.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 09:32:23 +0000 (19:32 +1000)]
target-sparc: Avoid cpu_tmp32 in Write Priv Register
No need to copy to a temporary to store 32 bits.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 09:32:22 +0000 (19:32 +1000)]
target-sparc: Avoid cpu_tmp32 in Read Priv Register
We don't need another temporary here. Load directly into the
register we want to set.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 09:32:21 +0000 (19:32 +1000)]
target-sparc: Use get_temp_i32 in gen_dest_fpr_F
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 09:32:20 +0000 (19:32 +1000)]
target-sparc: Split out get_temp_i32
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 09:32:19 +0000 (19:32 +1000)]
target-sparc: Make the cpu_addr variable local to load/store handling
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 09:32:18 +0000 (19:32 +1000)]
target-sparc: Cleanup cpu_src[12] allocation
Now that get_temp_tl is used for get_src[12], we don't need to
pre-allocate these temporaries.
Fallout from this is moving some assignments around cas/casx to
avoid uninitialized variable warnings.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 09:32:17 +0000 (19:32 +1000)]
target-sparc: Finish conversion to gen_load_gpr
All users of gen_movl_{reg_TN,TN_reg} are removed. At the same time,
make cpu_val a local variable for load/store disassembly.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 09:32:16 +0000 (19:32 +1000)]
target-sparc: Convert swap to gen_load/store_gpr
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 09:32:15 +0000 (19:32 +1000)]
target-sparc: Convert asi helpers to gen_*_gpr
Push the DisasContext down so that we can use gen_load/store_gpr
in sode gen_ldda_asi, gen_stda_ast, gen_cas_asi, gen_casx_asi.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 09:32:14 +0000 (19:32 +1000)]
target-sparc: Use gen_load_gpr in get_src[12]
This means we can avoid the incoming temporary, though the cleanup
of the existing temporaries is not performed in this patch.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 09:32:13 +0000 (19:32 +1000)]
target-sparc: Conversion to gen_*_gpr, part 1
Only handle the easy cases directly within disas_sparc_insn.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 09:32:12 +0000 (19:32 +1000)]
target-sparc: Add gen_load/store/dest_gpr
Infrastructure to be used to clean up handling of temporaries.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 07:30:14 +0000 (17:30 +1000)]
exec: Make MIN_CODE_GEN_BUFFER_SIZE private to exec.c
It is used nowhere else, and the corresponding MAX_CODE_GEN_BUFFER_SIZE
also lives there.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 07:30:13 +0000 (17:30 +1000)]
exec: Allocate code_gen_prologue from code_gen_buffer
We had a hack for arm and sparc, allocating code_gen_prologue to a
special section. Which, honestly does no good under certain cases.
We've already got limits on code_gen_buffer_size to ensure that all
TBs can use direct branches between themselves; reuse this limit to
ensure the prologue is also reachable.
As a bonus, we get to avoid marking a page of the main executable's
data segment as executable.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 07:30:12 +0000 (17:30 +1000)]
exec: Do not use absolute address hints for code_gen_buffer with -fpie
The hard-coded addresses inside alloc_code_gen_buffer only make sense
if we're building an executable that will actually run at the address
we've put into the linker scripts.
When we're building with -fpie, the executable will run at some
random location chosen by the kernel. We get better placement for
the code_gen_buffer if we allow the kernel to place the memory,
as it will tend to to place it near the executable, based on the
PROT_EXEC bit.
Since code_gen_prologue is always inside the executable, this effect
is easily seen at the end of most TB, with the exit_tb opcode, and
with any calls to helper functions.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 07:30:11 +0000 (17:30 +1000)]
exec: Don't make DEFAULT_CODE_GEN_BUFFER_SIZE too large
For ARM we cap the buffer size to 16MB. Do not allocate 32MB in that case.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Tue, 16 Oct 2012 07:30:10 +0000 (17:30 +1000)]
exec: Split up and tidy code_gen_buffer
It now consists of:
A macro definition of MAX_CODE_GEN_BUFFER_SIZE with host-specific values,
A function size_code_gen_buffer that applies most of the reasoning for
choosing a buffer size,
Three variations of a function alloc_code_gen_buffer that contain all
of the logic for allocating executable memory via a given allocation
mechanism.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Eduardo Habkost [Mon, 15 Oct 2012 20:22:02 +0000 (17:22 -0300)]
create struct for machine initialization arguments
This should help us to:
- More easily add or remove machine initialization arguments without
having to change every single machine init function;
- More easily make mechanical changes involving the machine init
functions in the future;
- Let machine initialization forward the init arguments to other
functions more easily.
This change was half-mechanical process: first the struct was added with
the local ram_size, boot_device, kernel_*, initrd_*, and cpu_model local
variable initialization to all functions. Then the compiler helped me
locate the local variables that are unused, so they could be removed.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Gerd Hoffmann [Mon, 15 Oct 2012 06:02:57 +0000 (08:02 +0200)]
vga: remove CONFIG_BOCHS_VBE
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Gerd Hoffmann [Mon, 15 Oct 2012 06:02:56 +0000 (08:02 +0200)]
vga: add specs for standard vga
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Gerd Hoffmann [Mon, 15 Oct 2012 06:02:55 +0000 (08:02 +0200)]
vga: add mmio bar to standard vga
This patch adds a mmio bar to the qemu standard vga which allows to
access the standard vga registers and bochs dispi interface registers
via mmio.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Gerd Hoffmann [Mon, 15 Oct 2012 06:02:54 +0000 (08:02 +0200)]
vga: fix indention
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Catalin Patulea [Tue, 16 Oct 2012 20:00:23 +0000 (16:00 -0400)]
tests/tcg: fix build
This broke when the tests were moved from tests/ to tests/tcg/.
On x86_64 host/i386-linux-user non-kvm guest, test-i386 and test-mmap are broken, but at least they build.
To build/run the tests:
$ cd $BUILD_PATH/tests/tcg
$ SRC_PATH=path/to/qemu make <target>
Signed-off-by: Catalin Patulea <catalinp@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Mike Frysinger [Sun, 16 Sep 2012 20:07:13 +0000 (16:07 -0400)]
allow make {dist, }clean work w/out configure
There's no reason to require configure to run before running a clean
target, so check MAKECMDGOALS before.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Michael Roth [Mon, 8 Oct 2012 20:45:49 +0000 (15:45 -0500)]
tci: fix build breakage for target-sparc
commit
c28ae41 introduced GETPC() usage for sparc, which is currently
not defined when building with --enable-tcg-interpreter. Add sparc to
the list of targets we selectively define GETPC() for.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Stefan Hajnoczi [Sun, 7 Oct 2012 16:08:49 +0000 (18:08 +0200)]
MAINTAINERS: Update email address for Stefan Hajnoczi
Switch to my new work email address from which I am contributing.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Jan Kiszka [Wed, 17 Oct 2012 17:09:25 +0000 (19:09 +0200)]
configure: Fix CONFIG_QEMU_HELPERDIR generation
We need to evaluate $libexecdir in configure, otherwise we literally end
up with "${prefix}/libexec" instead of the absolute path as
CONFIG_QEMU_HELPERDIR.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Peter Maydell [Thu, 4 Oct 2012 15:22:01 +0000 (16:22 +0100)]
qemu-options.hx: Change from recommending '?' to 'help'
Update the -help output and documentation so that it recommends
'help' rather than '?' for the various "list valid values for this
option" cases. '?' is deprecated (as it can fail confusingly if
not quoted), so it's better to steer users towards 'help'. ('?'
still works, for backwards compatibility.)
This is the -help option part of the change otherwise done in
commit
c8057f9, since we are now past release 1.2 and free to
change our help text without worrying about breaking libvirt.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Fri, 19 Oct 2012 18:28:22 +0000 (20:28 +0200)]
Merge branch 'linux-user-for-upstream' of git://git.linaro.org/people/rikuvoipio/qemu
* 'linux-user-for-upstream' of git://git.linaro.org/people/rikuvoipio/qemu:
linux-user: register align p{read, write}64
linux-user: ppc: mark as long long aligned
tcg: Remove TCG_TARGET_HAS_GUEST_BASE define
configure: Remove unnecessary host_guest_base code
linux-user: If loading fails, print error as string, not number
linux-user: Fix siginfo handling
alpha-linux-user: Fix sigaltstack structure definition
linux-user: Implement gethostname
linux-user: Perform more checks on iovec lists
linux-user: fix multi-threaded /proc/self/maps
linux-user: fix statfs
Aurelien Jarno [Fri, 19 Oct 2012 18:18:44 +0000 (20:18 +0200)]
Merge branch 'trivial-patches' of git://github.com/stefanha/qemu
* 'trivial-patches' of git://github.com/stefanha/qemu:
ui/vnc-jobs.c: Fix minor typos in comments
net/tap-win32: Fix compiler warning caused by missing include statement
configure: Remove unused parameters from main function
target-arm/neon_helper: Remove obsolete FIXME comment
targphys.h: Don't define target_phys_addr_t for user-mode emulators
ui/vnc: Only report/use TIGHT_PNG encoding if enabled.
Edgar E. Iglesias [Thu, 26 Apr 2012 12:18:25 +0000 (14:18 +0200)]
microblaze: Update PC before simulating syscall
Fixes a clone() emulation bug were the new thread starts
at the point of the syscall and thus clones in a loop.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Thu, 26 Apr 2012 12:17:41 +0000 (14:17 +0200)]
microblaze: Support setting of TLS ptr
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Peter Maydell [Thu, 18 Oct 2012 16:40:53 +0000 (17:40 +0100)]
ui/vnc-jobs.c: Fix minor typos in comments
Fix some minor typos/grammar errors in comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>