OSDN Git Service
Christoph Hellwig [Mon, 19 Mar 2018 10:38:20 +0000 (11:38 +0100)]
iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up intel_{alloc,free}_coherent()
Use the dma_direct_*() helpers and clean up the code flow.
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-9-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Christoph Hellwig [Mon, 19 Mar 2018 10:38:19 +0000 (11:38 +0100)]
iommu/amd_iommu: Use CONFIG_DMA_DIRECT_OPS=y and dma_direct_{alloc,free}()
This cleans up the code a lot by removing duplicate logic.
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-8-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Christoph Hellwig [Mon, 19 Mar 2018 10:38:18 +0000 (11:38 +0100)]
x86/dma/amd_gart: Use dma_direct_{alloc,free}()
This gains support for CMA allocations for the force_iommu case, and
cleans up the code a bit.
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-7-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Christoph Hellwig [Mon, 19 Mar 2018 10:38:17 +0000 (11:38 +0100)]
x86/dma/amd_gart: Look at dev->coherent_dma_mask instead of GFP_DMA
We want to phase out looking at the magic GFP_DMA flag in the DMA mapping
routines, so switch the gart driver to use the dev->coherent_dma_mask
instead, which is used to select the GFP_DMA flag in the caller.
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-6-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Christoph Hellwig [Mon, 19 Mar 2018 10:38:16 +0000 (11:38 +0100)]
x86/dma: Use generic swiotlb_ops
The generic swiotlb DMA ops were based on the x86 ones and provide
equivalent functionality, so use them.
Also fix the sta2x11 case. For that SOC the DMA map ops need an
additional physical to DMA address translations. For swiotlb buffers
that is done throught the phys_to_dma helper, but the sta2x11_dma_ops
also added an additional translation on the return value from
x86_swiotlb_alloc_coherent, which is only correct if that functions
returns a direct allocation and not a swiotlb buffer. With the
generic swiotlb and DMA-direct code phys_to_dma is not always used
and the separate sta2x11_dma_ops can be replaced with a simple
bit that marks if the additional physical to DMA address translation
is needed.
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-5-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Christoph Hellwig [Mon, 19 Mar 2018 10:38:15 +0000 (11:38 +0100)]
x86/dma: Use DMA-direct (CONFIG_DMA_DIRECT_OPS=y)
The generic DMA-direct (CONFIG_DMA_DIRECT_OPS=y) implementation is now
functionally equivalent to the x86 nommu dma_map implementation, so
switch over to using it.
That includes switching from using x86_dma_supported in various IOMMU
drivers to use dma_direct_supported instead, which provides the same
functionality.
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-4-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Christoph Hellwig [Mon, 19 Mar 2018 10:38:14 +0000 (11:38 +0100)]
x86/dma: Remove dma_alloc_coherent_mask()
These days all devices (including the ISA fallback device) have a coherent
DMA mask set, so remove the workaround.
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-3-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Tue, 20 Mar 2018 09:01:37 +0000 (10:01 +0100)]
Merge branch 'x86/mm' into x86/dma, to pick up dependencies
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Christoph Hellwig [Mon, 19 Mar 2018 10:38:13 +0000 (11:38 +0100)]
x86/cpu: Remove the CONFIG_X86_PPRO_FENCE=y quirk
There were only a few Pentium Pro multiprocessors systems where this
errata applied. They are more than 20 years old now, and we've slowly
dropped places which put the workarounds in and discouraged anyone
from enabling the workaround.
Get rid of it for good.
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-2-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
H.J. Lu [Mon, 19 Mar 2018 21:08:11 +0000 (14:08 -0700)]
x86/boot/64: Verify alignment of the LOAD segment
Since the x86-64 kernel must be aligned to 2MB, refuse to boot the
kernel if the alignment of the LOAD segment isn't a multiple of 2MB.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/CAMe9rOrR7xSJgUfiCoZLuqWUwymRxXPoGBW38%2BpN%3D9g%2ByKNhZw@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
H.J. Lu [Mon, 19 Mar 2018 20:57:46 +0000 (13:57 -0700)]
x86/build/64: Force the linker to use 2MB page size
Binutils 2.31 will enable -z separate-code by default for x86 to avoid
mixing code pages with data to improve cache performance as well as
security. To reduce x86-64 executable and shared object sizes, the
maximum page size is reduced from 2MB to 4KB. But x86-64 kernel must
be aligned to 2MB. Pass -z max-page-size=0x200000 to linker to force
2MB page size regardless of the default page size used by linker.
Tested with Linux kernel 4.15.6 on x86-64.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/CAMe9rOp4_%3D_8twdpTyAP2DhONOCeaTOsniJLoppzhoNptL8xzA@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Lutomirski [Sat, 17 Mar 2018 15:25:07 +0000 (08:25 -0700)]
selftests/x86/ptrace_syscall: Fix for yet more glibc interference
glibc keeps getting cleverer, and my version now turns raise() into
more than one syscall. Since the test relies on ptrace seeing an
exact set of syscalls, this breaks the test. Replace raise(SIGSTOP)
with syscall(SYS_tgkill, ...) to force glibc to get out of our way.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/bc80338b453afa187bc5f895bd8e2c8d6e264da2.1521300271.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Borislav Petkov [Wed, 14 Mar 2018 18:36:15 +0000 (19:36 +0100)]
x86/microcode: Fix CPU synchronization routine
Emanuel reported an issue with a hang during microcode update because my
dumb idea to use one atomic synchronization variable for both rendezvous
- before and after update - was simply bollocks:
microcode: microcode_reload_late: late_cpus: 4
microcode: __reload_late: cpu 2 entered
microcode: __reload_late: cpu 1 entered
microcode: __reload_late: cpu 3 entered
microcode: __reload_late: cpu 0 entered
microcode: __reload_late: cpu 1 left
microcode: Timeout while waiting for CPUs rendezvous, remaining: 1
CPU1 above would finish, leave and the others will still spin waiting for
it to join.
So do two synchronization atomics instead, which makes the code a lot more
straightforward.
Also, since the update is serialized and it also takes quite some time per
microcode engine, increase the exit timeout by the number of CPUs on the
system.
That's ok because the moment all CPUs are done, that timeout will be cut
short.
Furthermore, panic when some of the CPUs timeout when returning from a
microcode update: we can't allow a system with not all cores updated.
Also, as an optimization, do not do the exit sync if microcode wasn't
updated.
Reported-by: Emanuel Czirai <xftroxgpx@protonmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Emanuel Czirai <xftroxgpx@protonmail.com>
Tested-by: Ashok Raj <ashok.raj@intel.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lkml.kernel.org/r/20180314183615.17629-2-bp@alien8.de
Borislav Petkov [Wed, 14 Mar 2018 18:36:14 +0000 (19:36 +0100)]
x86/microcode: Attempt late loading only when new microcode is present
Return UCODE_NEW from the scanning functions to denote that new microcode
was found and only then attempt the expensive synchronization dance.
Reported-by: Emanuel Czirai <xftroxgpx@protonmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Emanuel Czirai <xftroxgpx@protonmail.com>
Tested-by: Ashok Raj <ashok.raj@intel.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lkml.kernel.org/r/20180314183615.17629-1-bp@alien8.de
Alexander Sergeyev [Tue, 13 Mar 2018 19:38:56 +0000 (22:38 +0300)]
x86/speculation: Remove Skylake C2 from Speculation Control microcode blacklist
In accordance with Intel's microcode revision guidance from March 6 MCU
rev 0xc2 is cleared on both Skylake H/S and Skylake Xeon E3 processors
that share CPUID 506E3.
Signed-off-by: Alexander Sergeyev <sergeev917@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jia Zhang <qianyue.zj@alibaba-inc.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kyle Huey <me@kylehuey.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/20180313193856.GA8580@localhost.localdomain
Toshi Kani [Wed, 14 Mar 2018 20:59:32 +0000 (14:59 -0600)]
x86/mm: Remove pointless checks in vmalloc_fault
vmalloc_fault() sets user's pgd or p4d from the kernel page table. Once
it's set, all tables underneath are identical. There is no point of
following the same page table with two separate pointers and make sure they
see the same with BUG().
Remove the pointless checks in vmalloc_fault(). Also rename the kernel
pgd/p4d pointers to pgd_k/p4d_k so that their names are consistent in the
file.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: Gratian Crisan <gratian.crisan@ni.com>
Link: https://lkml.kernel.org/r/20180314205932.7193-1-toshi.kani@hpe.com
Thomas Gleixner [Wed, 14 Mar 2018 19:23:25 +0000 (20:23 +0100)]
Merge branch 'x86/urgent' into x86/mm to pick up dependencies
Toshi Kani [Tue, 13 Mar 2018 17:03:46 +0000 (11:03 -0600)]
x86/mm: Fix vmalloc_fault to use pXd_large
Gratian Crisan reported that vmalloc_fault() crashes when CONFIG_HUGETLBFS
is not set since the function inadvertently uses pXn_huge(), which always
return 0 in this case. ioremap() does not depend on CONFIG_HUGETLBFS.
Fix vmalloc_fault() to call pXd_large() instead.
Fixes:
f4eafd8bcd52 ("x86/mm: Fix vmalloc_fault() to handle large pages properly")
Reported-by: Gratian Crisan <gratian.crisan@ni.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20180313170347.3829-2-toshi.kani@hpe.com
Josh Poimboeuf [Wed, 14 Mar 2018 15:24:20 +0000 (10:24 -0500)]
jump_label: Fix sparc64 warning
The kbuild test robot reported the following warning on sparc64:
kernel/jump_label.c: In function '__jump_label_update':
kernel/jump_label.c:376:51: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
WARN_ONCE(1, "can't patch jump_label at %pS", (void *)entry->code);
On sparc64, the jump_label entry->code field is of type u32, but
pointers are 64-bit. Silence the warning by casting entry->code to an
unsigned long before casting it to a pointer. This is also what the
sparc jump label code does.
Fixes:
dc1dd184c2f0 ("jump_label: Warn on failed jump_label patching attempt")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: "David S . Miller" <davem@davemloft.net>
Link: https://lkml.kernel.org/r/c966fed42be6611254a62d46579ec7416548d572.1521041026.git.jpoimboe@redhat.com
Andy Whitcroft [Wed, 14 Mar 2018 11:24:27 +0000 (11:24 +0000)]
x86/speculation, objtool: Annotate indirect calls/jumps for objtool on 32-bit kernels
In the following commit:
9e0e3c5130e9 ("x86/speculation, objtool: Annotate indirect calls/jumps for objtool")
... we added annotations for CALL_NOSPEC/JMP_NOSPEC on 64-bit x86 kernels,
but we did not annotate the 32-bit path.
Annotate it similarly.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180314112427.22351-1-apw@canonical.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Lutomirski [Wed, 14 Mar 2018 05:03:12 +0000 (22:03 -0700)]
x86/vm86/32: Fix POPF emulation
POPF would trap if VIP was set regardless of whether IF was set. Fix it.
Suggested-by: Stas Sergeev <stsp@list.ru>
Reported-by: Bart Oldeman <bartoldeman@gmail.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes:
5ed92a8ab71f ("x86/vm86: Use the normal pt_regs area for vm86")
Link: http://lkml.kernel.org/r/ce95f40556e7b2178b6bc06ee9557827ff94bd28.1521003603.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Lutomirski [Wed, 14 Mar 2018 05:03:11 +0000 (22:03 -0700)]
selftests/x86/entry_from_vm86: Add test cases for POPF
POPF is currently broken -- add tests to catch the error. This
results in:
[RUN] POPF with VIP set and IF clear from vm86 mode
[INFO] Exited vm86 mode due to STI
[FAIL] Incorrect return reason (started at eip = 0xd, ended at eip = 0xf)
because POPF currently fails to check IF before reporting a pending
interrupt.
This patch also makes the FAIL message a bit more informative.
Reported-by: Bart Oldeman <bartoldeman@gmail.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stas Sergeev <stsp@list.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/a16270b5cfe7832d6d00c479d0f871066cbdb52b.1521003603.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Lutomirski [Wed, 14 Mar 2018 05:03:10 +0000 (22:03 -0700)]
selftests/x86/entry_from_vm86: Exit with 1 if we fail
Fix a logic error that caused the test to exit with 0 even if test
cases failed.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stas Sergeev <stsp@list.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bartoldeman@gmail.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/b1cc37144038958a469c8f70a5f47a6a5638636a.1521003603.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Mon, 12 Mar 2018 17:47:03 +0000 (10:47 -0700)]
Merge tag 'nfs-for-4.16-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Hightlights include the following stable fixes:
- NFS: Fix an incorrect type in struct nfs_direct_req
- pNFS: Prevent the layout header refcount going to zero in
pnfs_roc()
- NFS: Fix unstable write completion"
* tag 'nfs-for-4.16-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix unstable write completion
pNFS: Prevent the layout header refcount going to zero in pnfs_roc()
NFS: Fix an incorrect type in struct nfs_direct_req
Andy Shevchenko [Tue, 20 Feb 2018 18:05:06 +0000 (20:05 +0200)]
x86/platform/intel-mid: Add special handling for ACPI HW reduced platforms
When switching to ACPI HW reduced platforms we still want to initialize timers.
Override x86_init.acpi.reduced_hw_init to achieve that.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-acpi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180220180506.65523-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Shevchenko [Tue, 20 Feb 2018 18:05:05 +0000 (20:05 +0200)]
ACPI, x86/boot: Introduce the ->reduced_hw_early_init() ACPI callback
Some ACPI hardware reduced platforms need to initialize certain devices
defined by the ACPI hardware specification even though in principle
those devices should not be present in an ACPI hardware reduced platform.
To allow that to happen, make it possible to override the generic
x86_init callbacks and provide a custom legacy_pic value, add a new
->reduced_hw_early_init() callback to struct x86_init_acpi and make
acpi_reduced_hw_init() use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-acpi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180220180506.65523-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Shevchenko [Tue, 20 Feb 2018 18:05:04 +0000 (20:05 +0200)]
ACPI, x86/boot: Split out acpi_generic_reduce_hw_init() and export
This is a preparation patch to allow override the hardware reduced
initialization on ACPI enabled platforms.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-acpi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180220180506.65523-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kirill A. Shutemov [Mon, 5 Mar 2018 16:25:53 +0000 (19:25 +0300)]
x86/pconfig: Provide defines and helper to run MKTME_KEY_PROG leaf
MKTME_KEY_PROG allows to manipulate MKTME keys in the CPU.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kai Huang <kai.huang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180305162610.37510-6-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kirill A. Shutemov [Mon, 5 Mar 2018 16:25:52 +0000 (19:25 +0300)]
x86/pconfig: Detect PCONFIG targets
Intel PCONFIG targets are enumerated via new CPUID leaf 0x1b. This patch
detects all supported targets of PCONFIG and implements helper to check
if the target is supported.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kai Huang <kai.huang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180305162610.37510-5-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kirill A. Shutemov [Mon, 5 Mar 2018 16:25:50 +0000 (19:25 +0300)]
x86/tme: Detect if TME and MKTME is activated by BIOS
IA32_TME_ACTIVATE MSR (0x982) can be used to check if BIOS has enabled
TME and MKTME. It includes which encryption policy/algorithm is selected
for TME or available for MKTME. For MKTME, the MSR also enumerates how
many KeyIDs are available.
We would need to exclude KeyID bits from physical address bits.
detect_tme() would adjust cpuinfo_x86::x86_phys_bits accordingly.
We have to do this even if we are not going to use KeyID bits
ourself. VM guests still have to know that these bits are not usable
for physical address.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kai Huang <kai.huang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180305162610.37510-3-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Mon, 12 Mar 2018 11:10:03 +0000 (12:10 +0100)]
Merge branch 'x86/pti' into x86/mm, to pick up dependencies
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kirill A. Shutemov [Mon, 5 Mar 2018 16:25:51 +0000 (19:25 +0300)]
x86/cpufeatures: Add Intel PCONFIG cpufeature
CPUID.0x7.0x0:EDX[18] indicates whether Intel CPU support PCONFIG instruction.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kai Huang <kai.huang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180305162610.37510-4-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kirill A. Shutemov [Mon, 5 Mar 2018 16:25:49 +0000 (19:25 +0300)]
x86/cpufeatures: Add Intel Total Memory Encryption cpufeature
CPUID.0x7.0x0:ECX[13] indicates whether CPU supports Intel Total Memory
Encryption.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kai Huang <kai.huang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180305162610.37510-2-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kirill A. Shutemov [Mon, 12 Mar 2018 10:02:46 +0000 (13:02 +0300)]
x86/boot/compressed/64: Handle 5-level paging boot if kernel is above 4G
This patch addresses a shortcoming in current boot process on machines
that supports 5-level paging.
If a bootloader enables 64-bit mode with 4-level paging, we might need to
switch over to 5-level paging. The switching requires the disabling
paging. It works fine if kernel itself is loaded below 4G.
But if the bootloader put the kernel above 4G (not sure if anybody does
this), we would lose control as soon as paging is disabled, because the
code becomes unreachable to the CPU.
This patch implements a trampoline in lower memory to handle this
situation.
We only need the memory for a very short time, until the main kernel
image sets up own page tables.
We go through the trampoline even if we don't have to: if we're already
in 5-level paging mode or if we don't need to switch to it. This way the
trampoline gets tested on every boot.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180312100246.89175-5-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kirill A. Shutemov [Mon, 12 Mar 2018 10:02:45 +0000 (13:02 +0300)]
x86/boot/compressed/64: Use page table in trampoline memory
If a bootloader enables 64-bit mode with 4-level paging, we might need to
switch over to 5-level paging. The switching requires the disabling
paging. It works fine if kernel itself is loaded below 4G.
But if the bootloader put the kernel above 4G (i.e. in kexec() case),
we would lose control as soon as paging is disabled, because the code
becomes unreachable to the CPU.
To handle the situation, we need a trampoline in lower memory that would
take care of switching on 5-level paging.
Apart from the trampoline code itself we also need a place to store
top-level page table in lower memory as we don't have a way to load
64-bit values into CR3 in 32-bit mode. We only really need 8 bytes there
as we only use the very first entry of the page table. But we allocate a
whole page anyway.
This patch switches 32-bit code to use page table in trampoline memory.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180312100246.89175-4-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kirill A. Shutemov [Mon, 12 Mar 2018 10:02:44 +0000 (13:02 +0300)]
x86/boot/compressed/64: Use stack from trampoline memory
As the first step on using trampoline memory, let's make 32-bit code use
stack there.
Separate stack is required to return back from trampoline and we cannot
user stack from 64-bit mode as it may be above 4G.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180312100246.89175-3-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kirill A. Shutemov [Mon, 12 Mar 2018 10:02:43 +0000 (13:02 +0300)]
x86/boot/compressed/64: Make sure we have a 32-bit code segment
When kernel starts in 64-bit mode we inherit the GDT from the bootloader.
It may cause a problem if the GDT doesn't have a 32-bit code segment
where we expect it to be.
Load our own GDT with known segments.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180312100246.89175-2-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kirill A. Shutemov [Mon, 5 Mar 2018 08:16:41 +0000 (11:16 +0300)]
x86/mm: Do not use paravirtualized calls in native_set_p4d()
In 4-level paging mode, native_set_p4d() updates the entry in the top-level
page table. With PTI, update to the top-level kernel page table requires
update to the userspace copy of the table as well, using pti_set_user_pgd().
native_set_p4d() uses p4d_val() and pgd_val() to convert types between
p4d_t and pgd_t.
p4d_val() and pgd_val() are paravirtualized and we must not use them in
native helpers, as they crash the boot in paravirtualized environments.
Replace p4d_val() and pgd_val() with native_p4d_val() and
native_pgd_val() in native_set_p4d().
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
91f606a8fa68 ("x86/mm: Replace compile-time checks for 5-level paging with runtime-time checks")
Link: http://lkml.kernel.org/r/20180305081641.4290-1-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Baoquan He [Fri, 2 Mar 2018 05:18:01 +0000 (13:18 +0800)]
kdump, vmcoreinfo: Export pgtable_l5_enabled value
User-space utilities examining crash-kernels need to know if the
crashed kernel was in 5-level paging mode or not.
So write 'pgtable_l5_enabled' to vmcoreinfo, which covers these
three cases:
pgtable_l5_enabled == 0 when:
- Compiled with !CONFIG_X86_5LEVEL
- Compiled with CONFIG_X86_5LEVEL=y while CPU has no 'la57' flag
pgtable_l5_enabled != 0 when:
- Compiled with CONFIG_X86_5LEVEL=y and CPU has 'la57' flag
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: douly.fnst@cn.fujitsu.com
Cc: dyoung@redhat.com
Cc: ebiederm@xmission.com
Cc: kirill.shutemov@linux.intel.com
Cc: vgoyal@redhat.com
Link: http://lkml.kernel.org/r/20180302051801.19594-1-bhe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kirill A. Shutemov [Mon, 26 Feb 2018 18:04:51 +0000 (21:04 +0300)]
x86/boot/compressed/64: Prepare new top-level page table for trampoline
If trampoline code would need to switch between 4- and 5-level paging
modes, we have to use a page table in trampoline memory.
Having it in trampoline memory guarantees that it's below 4G and we can
point CR3 to it from 32-bit trampoline code.
We only use the page table if the desired paging mode doesn't match the
mode we are in. Otherwise the page table is unused and trampoline code
wouldn't touch CR3.
For 4- to 5-level paging transition, we set up current (4-level paging)
CR3 as the first and the only entry in a new top-level page table.
For 5- to 4-level paging transition, copy page table pointed by first
entry in the current top-level page table as our new top-level page
table.
If the page table is used by trampoline we would need to copy it to new
page table outside trampoline and update CR3 before restoring trampoline
memory.
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180226180451.86788-6-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kirill A. Shutemov [Mon, 26 Feb 2018 18:04:50 +0000 (21:04 +0300)]
x86/boot/compressed/64: Set up trampoline memory
This patch clears up trampoline memory and copies trampoline code in
place. It's not yet used though.
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180226180451.86788-5-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kirill A. Shutemov [Mon, 26 Feb 2018 18:04:49 +0000 (21:04 +0300)]
x86/boot/compressed/64: Save and restore trampoline memory
The memory area we found for trampoline shouldn't contain anything
useful. But let's preserve the data anyway. Just to be on safe side.
paging_prepare() would save the data into a buffer.
cleanup_trampoline() would restore it back once we are done with the
trampoline.
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180226180451.86788-4-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kirill A. Shutemov [Mon, 26 Feb 2018 18:04:48 +0000 (21:04 +0300)]
x86/boot/compressed/64: Find a place for 32-bit trampoline
If a bootloader enables 64-bit mode with 4-level paging, we might need to
switch over to 5-level paging. The switching requires the disabling of
paging, which works fine if kernel itself is loaded below 4G.
But if the bootloader puts the kernel above 4G (not sure if anybody does
this), we would lose control as soon as paging is disabled, because the
code becomes unreachable to the CPU.
To handle the situation, we need a trampoline in lower memory that would
take care of switching on 5-level paging.
This patch finds a spot in low memory for a trampoline.
The heuristic is based on code in reserve_bios_regions().
We find the end of low memory based on BIOS and EBDA start addresses.
The trampoline is put just before end of low memory. It's mimic approach
taken to allocate memory for realtime trampoline.
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180226180451.86788-3-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kirill A. Shutemov [Mon, 26 Feb 2018 18:04:47 +0000 (21:04 +0300)]
x86/boot/compressed/64: Describe the logic behind the LA57 check
The patch explains the LA57 check in more details.
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180226180451.86788-2-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Mon, 12 Mar 2018 00:25:09 +0000 (17:25 -0700)]
Linux 4.16-rc5
Linus Torvalds [Sun, 11 Mar 2018 21:59:23 +0000 (14:59 -0700)]
Merge branch 'x86-pti-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86/pti updates from Thomas Gleixner:
"Yet another pile of melted spectrum related updates:
- Drop native vsyscall support finally as it causes more trouble than
benefit.
- Make microcode loading more robust. There were a few issues
especially related to late loading which are now surfacing because
late loading of the IB* microcodes addressing spectre issues has
become more widely used.
- Simplify and robustify the syscall handling in the entry code
- Prevent kprobes on the entry trampoline code which lead to kernel
crashes when the probe hits before CR3 is updated
- Don't check microcode versions when running on hypervisors as they
are considered as lying anyway.
- Fix the 32bit objtool build and a coment typo"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix kernel crash when probing .entry_trampoline code
x86/pti: Fix a comment typo
x86/microcode: Synchronize late microcode loading
x86/microcode: Request microcode on the BSP
x86/microcode/intel: Look into the patch cache first
x86/microcode: Do not upload microcode if CPUs are offline
x86/microcode/intel: Writeback and invalidate caches before updating microcode
x86/microcode/intel: Check microcode revision before updating sibling threads
x86/microcode: Get rid of struct apply_microcode_ctx
x86/spectre_v2: Don't check microcode versions when running under hypervisors
x86/vsyscall/64: Drop "native" vsyscalls
x86/entry/64/compat: Save one instruction in entry_INT80_compat()
x86/entry: Do not special-case clone(2) in compat entry
x86/syscalls: Use COMPAT_SYSCALL_DEFINEx() macros for x86-only compat syscalls
x86/syscalls: Use proper syscall definition for sys_ioperm()
x86/entry: Remove stale syscall prototype
x86/syscalls/32: Simplify $entry == $compat entries
objtool: Fix 32-bit build
Linus Torvalds [Sun, 11 Mar 2018 21:55:15 +0000 (14:55 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"Just a single fix which adds a missing Kconfig dependency to avoid
unmet dependency warnings"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/atmel-st: Add 'depends on HAS_IOMEM' to fix unmet dependency
Linus Torvalds [Sun, 11 Mar 2018 21:52:41 +0000 (14:52 -0700)]
Merge branch 'ras-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull RAS fixes from Thomas Gleixner:
"Two small fixes for RAS/MCE:
- Serialize sysfs changes to avoid concurrent modificaiton of
underlying data
- Add microcode revision to Machine Check records. This should have
been there forever, but now with the broken microcode versions in
the wild it has become important"
* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/MCE: Serialize sysfs changes
x86/MCE: Save microcode revision in machine check records
Linus Torvalds [Sun, 11 Mar 2018 21:49:49 +0000 (14:49 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf updates from Thomas Gleixner:
"Another set of perf updates:
- Fix a Skylake Uncore event format declaration
- Prevent perf pipe mode from crahsing which was caused by a missing
buffer allocation
- Make the perf top popup message which tells the user that it uses
fallback mode on older kernels a debug message.
- Make perf context rescheduling work correcctly
- Robustify the jump error drawing in perf browser mode so it does
not try to create references to NULL initialized offset entries
- Make trigger_on() robust so it does not enable the trigger before
everything is set up correctly to handle it
- Make perf auxtrace respect the --no-itrace option so it does not
try to queue AUX data for decoding.
- Prevent having different number of field separators in CVS output
lines when a counter is not supported.
- Make the perf kallsyms man page usage behave like it does for all
other perf commands.
- Synchronize the kernel headers"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix ctx_event_type in ctx_resched()
perf tools: Fix trigger class trigger_on()
perf auxtrace: Prevent decoding when --no-itrace
perf stat: Fix CVS output format for non-supported counters
tools headers: Sync x86's cpufeatures.h
tools headers: Sync copy of kvm UAPI headers
perf record: Fix crash in pipe mode
perf annotate browser: Be more robust when drawing jump arrows
perf top: Fix annoying fallback message on older kernels
perf kallsyms: Fix the usage on the man page
perf/x86/intel/uncore: Fix Skylake UPI event format
Linus Torvalds [Sun, 11 Mar 2018 21:46:54 +0000 (14:46 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fix from Thomas Gleixner:
"rt_mutex_futex_unlock() grew a new irq-off call site, but the function
assumes that its always called from irq enabled context.
Use (un)lock_irqsafe() to handle the new call site correctly"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rtmutex: Make rt_mutex_futex_unlock() safe for irq-off callsites
Linus Torvalds [Sun, 11 Mar 2018 20:07:14 +0000 (13:07 -0700)]
Merge tag 'dmaengine-fix-4.16-rc5' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Two small fixes are for this cycle:
- fix max_chunk_size for rcar-dmac for R-Car Gen3
- fix clock resource of mv_xor_v2"
* tag 'dmaengine-fix-4.16-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: mv_xor_v2: Fix clock resource by adding a register clock
dmaengine: rcar-dmac: fix max_chunk_size for R-Car Gen3
Linus Torvalds [Sun, 11 Mar 2018 20:05:15 +0000 (13:05 -0700)]
Merge tag 'gpio-v4.16-3' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fix from Linus Walleij:
"This is a single GPIO fix for the v4.16 series affecting the Renesas
driver, and fixes wakeup from external stuff"
* tag 'gpio-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: rcar: Use wakeup_path i.s.o. explicit clock handling
Gregory CLEMENT [Wed, 7 Mar 2018 15:40:10 +0000 (16:40 +0100)]
dmaengine: mv_xor_v2: Fix clock resource by adding a register clock
On the CP110 components which are present on the Armada 7K/8K SoC we need
to explicitly enable the clock for the registers. However it is not
needed for the AP8xx component, that's why this clock is optional.
With this patch both clock have now a name, but in order to be backward
compatible, the name of the first clock is not used. It allows to still
use this clock with a device tree using the old binding.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Linus Torvalds [Sat, 10 Mar 2018 18:21:07 +0000 (10:21 -0800)]
Merge tag 'kbuild-fixes-v4.16-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- make fixdep parse kconfig.h to fix missing rebuild
- replace hyphens with underscores in builtin DTB label names
- fix typos
* tag 'kbuild-fixes-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Handle builtin dtb file names containing hyphens
scripts/bloat-o-meter: fix typos in help
fixdep: do not ignore kconfig.h
fixdep: remove some false CONFIG_ matches
fixdep: remove stale references to uml-config.h
Linus Torvalds [Sat, 10 Mar 2018 18:17:59 +0000 (10:17 -0800)]
Merge tag 'linux-watchdog-4.16-fixes-2' of git://linux-watchdog.org/linux-watchdog
Pull watchdog fixes from Wim Van Sebroeck:
- f71808e_wdt: Fix magic close handling
- sbsa: 32-bit read fix for WCV
- hpwdt: Remove legacy NMI sourcing
* tag 'linux-watchdog-4.16-fixes-2' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: hpwdt: Remove legacy NMI sourcing.
watchdog: sbsa: use 32-bit read for WCV
watchdog: f71808e_wdt: Fix magic close handling
Linus Torvalds [Sat, 10 Mar 2018 16:48:01 +0000 (08:48 -0800)]
Merge tag 'for-linus-
20180309' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- a xen-blkfront fix from Bhavesh with a multiqueue fix when
detaching/re-attaching
- a few important NVMe fixes, including a revert for a sysfs fix that
caused some user space confusion
- two bcache fixes by way of Michael Lyle
- a loop regression fix, fixing an issue with lost writes on DAX.
* tag 'for-linus-
20180309' of git://git.kernel.dk/linux-block:
loop: Fix lost writes caused by missing flag
nvme_fc: rework sqsize handling
nvme-fabrics: Ignore nr_io_queues option for discovery controllers
xen-blkfront: move negotiate_mq to cover all cases of new VBDs
Revert "nvme: create 'slaves' and 'holders' entries for hidden controllers"
bcache: don't attach backing with duplicate UUID
bcache: fix crashes in duplicate cache device register
nvme: pci: pass max vectors as num_possible_cpus() to pci_alloc_irq_vectors
nvme-pci: Fix EEH failure on ppc
Linus Torvalds [Sat, 10 Mar 2018 16:45:44 +0000 (08:45 -0800)]
Merge tag 'for-4.16/dm-fixes-2' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix an uninitialized variable false warning in dm bufio
- Fix DM's passthrough ioctl support to be race free against an
underlying device being removed.
- Fix corner-case of DM raid resync reporting if/when the raid becomes
degraded during resync; otherwise automated raid repair will fail.
- A few DM multipath fixes to make non-SCSI optimizations, that were
introduced during the 4.16 merge, useful for all non-SCSI devices,
rather than narrowly define this non-SCSI mode in terms of "nvme".
This allows the removal of "queue_mode nvme" that really didn't need
to be introduced. Instead DM core will internalize whether
nvme-specific IO submission optimizations are doable and DM multipath
will only do SCSI-specific device handler operations if SCSI is in
use.
* tag 'for-4.16/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm table: allow upgrade from bio-based to specialized bio-based variant
dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks
dm table: fix "nvme" test
dm raid: fix incorrect sync_ratio when degraded
dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl
dm bufio: avoid false-positive Wmaybe-uninitialized warning
Linus Torvalds [Sat, 10 Mar 2018 16:38:01 +0000 (08:38 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fixes from Doug Ledford:
- Various driver bug fixes in mlx5, mlx4, bnxt_re and qedr, ranging
from bugs under load to bad error case handling
- There in one largish patch fixing the locking in bnxt_re to avoid a
machine hard lock situation
- A few core bugs on error paths
- A patch to reduce stack usage in the new CQ API
- One mlx5 regression introduced in this merge window
- There were new syzkaller scripts written for the RDMA subsystem and
we are fixing issues found by the bot
- One of the commits (
aa0de36a40f4 “RDMA/mlx5: Fix integer overflow
while resizing CQ”) is missing part of the commit log message and one
of the SOB lines. The original patch was from Leon Romanovsky, and a
cut-n-paste separator in the commit message confused patchworks which
then put the end of message separator in the wrong place in the
downloaded patch, and I didn’t notice in time. The patch made it into
the official branch, and the only way to fix it in-place was to
rebase. Given the pain that a rebase causes, and the fact that the
patch has relevant tags for stable and syzkaller, a revert of the
munged patch and a reapplication of the original patch with the log
message intact was done.
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (25 commits)
RDMA/mlx5: Fix integer overflow while resizing CQ
Revert "RDMA/mlx5: Fix integer overflow while resizing CQ"
RDMA/ucma: Check that user doesn't overflow QP state
RDMA/mlx5: Fix integer overflow while resizing CQ
RDMA/ucma: Limit possible option size
IB/core: Fix possible crash to access NULL netdev
RDMA/bnxt_re: Avoid Hard lockup during error CQE processing
RDMA/core: Reduce poll batch for direct cq polling
IB/mlx5: Fix an error code in __mlx5_ib_modify_qp()
IB/mlx5: When not in dual port RoCE mode, use provided port as native
IB/mlx4: Include GID type when deleting GIDs from HW table under RoCE
IB/mlx4: Fix corruption of RoCEv2 IPv4 GIDs
RDMA/qedr: Fix iWARP write and send with immediate
RDMA/qedr: Fix kernel panic when running fio over NFSoRDMA
RDMA/qedr: Fix iWARP connect with port mapper
RDMA/qedr: Fix ipv6 destination address resolution
IB/core : Add null pointer check in addr_resolve
RDMA/bnxt_re: Fix the ib_reg failure cleanup
RDMA/bnxt_re: Fix incorrect DB offset calculation
RDMA/bnxt_re: Unconditionly fence non wire memory operations
...
Linus Torvalds [Sat, 10 Mar 2018 16:35:29 +0000 (08:35 -0800)]
Merge tag 'platform-drivers-x86-v4.16-6' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixes from Darren Hart:
"Correct a module loading race condition between the DELL_SMBIOS
backend modules and the first user by converting them to bool features
of the DELL_SMBIOS driver. Fixup the resulting Kconfig dependency
issue with DCDBAS"
* tag 'platform-drivers-x86-v4.16-6' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: dell-smbios: Resolve dependency error on DCDBAS
platform/x86: Allow for SMBIOS backend defaults
platform/x86: dell-smbios: Link all dell-smbios-* modules together
platform/x86: dell-smbios: Rename dell-smbios source to dell-smbios-base
platform/x86: dell-smbios: Correct some style warnings
Linus Torvalds [Sat, 10 Mar 2018 00:59:19 +0000 (16:59 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"PPC:
- Fix guest time accounting in the host
- Fix large-page backing for radix guests on POWER9
- Fix HPT guests on POWER9 backed by 2M or 1G pages
- Compile fixes for some configs and gcc versions
s390:
- Fix random memory corruption when running as guest2 (e.g. KVM in
LPAR) and starting guest3 (e.g. nested KVM) with many CPUs
- Export forgotten io interrupt delivery statistics counter"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: fix memory overwrites when not using SCA entries
KVM: PPC: Book3S HV: Fix guest time accounting with VIRT_CPU_ACCOUNTING_GEN
KVM: PPC: Book3S HV: Fix VRMA initialization with 2MB or 1GB memory backing
KVM: PPC: Book3S HV: Fix handling of large pages in radix page fault handler
KVM: s390: provide io interrupt kvm_stat
KVM: PPC: Book3S: Fix compile error that occurs with some gcc versions
KVM: PPC: Fix compile error that occurs when CONFIG_ALTIVEC=n
Linus Torvalds [Sat, 10 Mar 2018 00:54:18 +0000 (16:54 -0800)]
Merge tag 'for-linus-4.16a-rc5-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"Just one fix for the correct error handling after a failed
device_register()"
* tag 'for-linus-4.16a-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: xenbus: use put_device() instead of kfree()
Linus Torvalds [Sat, 10 Mar 2018 00:49:30 +0000 (16:49 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- The SMCCC firmware interface for the spectre variant 2 mitigation has
been updated to allow the discovery of whether the CPU needs the
workaround. This pull request relaxes the kernel check on the return
value from firmware.
- Fix the commit allowing changing from global to non-global page table
entries which inadvertently disallowed other safe attribute changes.
- Fix sleeping in atomic during the arm_perf_teardown_cpu() code.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Relax ARM_SMCCC_ARCH_WORKAROUND_1 discovery
arm_pmu: Use disable_irq_nosync when disabling SPI in CPU teardown hook
arm64: mm: fix thinko in non-global page table attribute check
Linus Torvalds [Sat, 10 Mar 2018 00:45:57 +0000 (16:45 -0800)]
Merge tag 'docs-4.16-fix' of git://git.lwn.net/linux
Pull Documentation build fix from Jonathan Corbet:
"The Sphinx 1.7 release broke the build process for reasons that are
mostly our fault.
This is a single fix cherry-picked from docs-next that restores docs
buildability for all supported Sphinx versions"
* tag 'docs-4.16-fix' of git://git.lwn.net/linux:
Documentation/sphinx: Fix Directive import error
Linus Torvalds [Sat, 10 Mar 2018 00:42:25 +0000 (16:42 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"8 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
lib/test_kmod.c: fix limit check on number of test devices created
selftests/vm/run_vmtests: adjust hugetlb size according to nr_cpus
mm/page_alloc: fix memmap_init_zone pageblock alignment
mm/memblock.c: hardcode the end_pfn being -1
mm/gup.c: teach get_user_pages_unlocked to handle FOLL_NOWAIT
lib/bug.c: exclude non-BUG/WARN exceptions from report_bug()
bug: use %pB in BUG and stack protector failure
hugetlb: fix surplus pages accounting
Luis R. Rodriguez [Fri, 9 Mar 2018 23:51:20 +0000 (15:51 -0800)]
lib/test_kmod.c: fix limit check on number of test devices created
As reported by Dan the parentheses is in the wrong place, and since
unlikely() call returns either 0 or 1 it's never less than zero. The
second issue is that signed integer overflows like "INT_MAX + 1" are
undefined behavior.
Since num_test_devs represents the number of devices, we want to stop
prior to hitting the max, and not rely on the wrap arround at all. So
just cap at num_test_devs + 1, prior to assigning a new device.
Link: http://lkml.kernel.org/r/20180224030046.24238-1-mcgrof@kernel.org
Fixes:
d9c6a72d6fa2 ("kmod: add test driver to stress test the module loader")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Zhijian [Fri, 9 Mar 2018 23:51:16 +0000 (15:51 -0800)]
selftests/vm/run_vmtests: adjust hugetlb size according to nr_cpus
Fix userfaultfd_hugetlb on hosts which have more than 64 cpus.
---------------------------
running userfaultfd_hugetlb
---------------------------
invalid MiB
Usage: <MiB> <bounces>
[FAIL]
Via userfaultfd.c we can know, hugetlb_size needs to meet hugetlb_size
>= nr_cpus * hugepage_size. hugepage_size is often 2M, so when host
cpus > 64, it requires more than 128M.
[zhijianx.li@intel.com: update changelog/comments and variable name]
Link: http://lkml.kernel.org/r/20180302024356.83359-1-zhijianx.li@intel.com
Link: http://lkml.kernel.org/r/20180303125027.81638-1-zhijianx.li@intel.com
Link: http://lkml.kernel.org/r/20180302024356.83359-1-zhijianx.li@intel.com
Signed-off-by: Li Zhijian <zhijianx.li@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: SeongJae Park <sj38.park@gmail.com>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Vacek [Fri, 9 Mar 2018 23:51:13 +0000 (15:51 -0800)]
mm/page_alloc: fix memmap_init_zone pageblock alignment
Commit
b92df1de5d28 ("mm: page_alloc: skip over regions of invalid pfns
where possible") introduced a bug where move_freepages() triggers a
VM_BUG_ON() on uninitialized page structure due to pageblock alignment.
To fix this, simply align the skipped pfns in memmap_init_zone() the
same way as in move_freepages_block().
Seen in one of the RHEL reports:
crash> log | grep -e BUG -e RIP -e Call.Trace -e move_freepages_block -e rmqueue -e freelist -A1
kernel BUG at mm/page_alloc.c:1389!
invalid opcode: 0000 [#1] SMP
--
RIP: 0010:[<
ffffffff8118833e>] [<
ffffffff8118833e>] move_freepages+0x15e/0x160
RSP: 0018:
ffff88054d727688 EFLAGS:
00010087
--
Call Trace:
[<
ffffffff811883b3>] move_freepages_block+0x73/0x80
[<
ffffffff81189e63>] __rmqueue+0x263/0x460
[<
ffffffff8118c781>] get_page_from_freelist+0x7e1/0x9e0
[<
ffffffff8118caf6>] __alloc_pages_nodemask+0x176/0x420
--
RIP [<
ffffffff8118833e>] move_freepages+0x15e/0x160
RSP <
ffff88054d727688>
crash> page_init_bug -v | grep RAM
<struct resource 0xffff88067fffd2f8> 1000 - 9bfff System RAM (620.00 KiB)
<struct resource 0xffff88067fffd3a0> 100000 -
430bffff System RAM ( 1.05 GiB = 1071.75 MiB =
1097472.00 KiB)
<struct resource 0xffff88067fffd410>
4b0c8000 -
4bf9cfff System RAM ( 14.83 MiB = 15188.00 KiB)
<struct resource 0xffff88067fffd480>
4bfac000 -
646b1fff System RAM (391.02 MiB = 400408.00 KiB)
<struct resource 0xffff88067fffd560>
7b788000 -
7b7fffff System RAM (480.00 KiB)
<struct resource 0xffff88067fffd640>
100000000 -
67fffffff System RAM ( 22.00 GiB)
crash> page_init_bug | head -6
<struct resource 0xffff88067fffd560>
7b788000 -
7b7fffff System RAM (480.00 KiB)
<struct page 0xffffea0001ede200>
1fffff00000000 0 <struct pglist_data 0xffff88047ffd9000> 1 <struct zone 0xffff88047ffd9800> DMA32 4096
1048575
<struct page 0xffffea0001ede200> 505736 505344 <struct page 0xffffea0001ed8000> 505855 <struct page 0xffffea0001edffc0>
<struct page 0xffffea0001ed8000> 0 0 <struct pglist_data 0xffff88047ffd9000> 0 <struct zone 0xffff88047ffd9000> DMA 1 4095
<struct page 0xffffea0001edffc0>
1fffff00000400 0 <struct pglist_data 0xffff88047ffd9000> 1 <struct zone 0xffff88047ffd9800> DMA32 4096
1048575
BUG, zones differ!
Note that this range follows two not populated sections
68000000-
77ffffff in this zone.
7b788000-
7b7fffff is the first one
after a gap. This makes memmap_init_zone() skip all the pfns up to the
beginning of this range. But this range is not pageblock (2M) aligned.
In fact no range has to be.
crash> kmem -p
77fff000 78000000 7b5ff000 7b600000 7b787000 7b788000
PAGE PHYSICAL MAPPING INDEX CNT FLAGS
ffffea0001e00000 78000000 0 0 0 0
ffffea0001ed7fc0 7b5ff000 0 0 0 0
ffffea0001ed8000 7b600000 0 0 0 0 <<<<
ffffea0001ede1c0 7b787000 0 0 0 0
ffffea0001ede200 7b788000 0 0 1
1fffff00000000
Top part of page flags should contain nodeid and zonenr, which is not
the case for page
ffffea0001ed8000 here (<<<<).
crash> log | grep -o
fffea0001ed[^\ ]* | sort -u
fffea0001ed8000
fffea0001eded20
fffea0001edffc0
crash> bt -r | grep -o
fffea0001ed[^\ ]* | sort -u
fffea0001ed8000
fffea0001eded00
fffea0001eded20
fffea0001edffc0
Initialization of the whole beginning of the section is skipped up to
the start of the range due to the commit
b92df1de5d28. Now any code
calling move_freepages_block() (like reusing the page from a freelist as
in this example) with a page from the beginning of the range will get
the page rounded down to start_page
ffffea0001ed8000 and passed to
move_freepages() which crashes on assertion getting wrong zonenr.
> VM_BUG_ON(page_zone(start_page) != page_zone(end_page));
Note, page_zone() derives the zone from page flags here.
From similar machine before commit
b92df1de5d28:
crash> kmem -p
77fff000 78000000 7b5ff000 7b600000 7b7fe000 7b7ff000
PAGE PHYSICAL MAPPING INDEX CNT FLAGS
fffff73941e00000 78000000 0 0 1
1fffff00000000
fffff73941ed7fc0 7b5ff000 0 0 1
1fffff00000000
fffff73941ed8000 7b600000 0 0 1
1fffff00000000
fffff73941edff80 7b7fe000 0 0 1
1fffff00000000
fffff73941edffc0 7b7ff000 ffff8e67e04d3ae0 ad84 1
1fffff00020068 uptodate,lru,active,mappedtodisk
All the pages since the beginning of the section are initialized.
move_freepages()' not gonna blow up.
The same machine with this fix applied:
crash> kmem -p
77fff000 78000000 7b5ff000 7b600000 7b7fe000 7b7ff000
PAGE PHYSICAL MAPPING INDEX CNT FLAGS
ffffea0001e00000 78000000 0 0 0 0
ffffea0001e00000 7b5ff000 0 0 0 0
ffffea0001ed8000 7b600000 0 0 1
1fffff00000000
ffffea0001edff80 7b7fe000 0 0 1
1fffff00000000
ffffea0001edffc0 7b7ff000 ffff88017fb13720 8 2
1fffff00020068 uptodate,lru,active,mappedtodisk
At least the bare minimum of pages is initialized preventing the crash
as well.
Customers started to report this as soon as 7.4 (where
b92df1de5d28 was
merged in RHEL) was released. I remember reports from
September/October-ish times. It's not easily reproduced and happens on
a handful of machines only. I guess that's why. But that does not make
it less serious, I think.
Though there actually is a report here:
https://bugzilla.kernel.org/show_bug.cgi?id=196443
And there are reports for Fedora from July:
https://bugzilla.redhat.com/show_bug.cgi?id=
1473242
and CentOS:
https://bugs.centos.org/view.php?id=13964
and we internally track several dozens reports for RHEL bug
https://bugzilla.redhat.com/show_bug.cgi?id=
1525121
Link: http://lkml.kernel.org/r/0485727b2e82da7efbce5f6ba42524b429d0391a.1520011945.git.neelx@redhat.com
Fixes:
b92df1de5d28 ("mm: page_alloc: skip over regions of invalid pfns where possible")
Signed-off-by: Daniel Vacek <neelx@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Vacek [Fri, 9 Mar 2018 23:51:09 +0000 (15:51 -0800)]
mm/memblock.c: hardcode the end_pfn being -1
This is just a cleanup. It aids handling the special end case in the
next commit.
[akpm@linux-foundation.org: make it work against current -linus, not against -mm]
[akpm@linux-foundation.org: make it work against current -linus, not against -mm some more]
Link: http://lkml.kernel.org/r/1ca478d4269125a99bcfb1ca04d7b88ac1aee924.1520011944.git.neelx@redhat.com
Signed-off-by: Daniel Vacek <neelx@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrea Arcangeli [Fri, 9 Mar 2018 23:51:06 +0000 (15:51 -0800)]
mm/gup.c: teach get_user_pages_unlocked to handle FOLL_NOWAIT
KVM is hanging during postcopy live migration with userfaultfd because
get_user_pages_unlocked is not capable to handle FOLL_NOWAIT.
Earlier FOLL_NOWAIT was only ever passed to get_user_pages.
Specifically faultin_page (the callee of get_user_pages_unlocked caller)
doesn't know that if FAULT_FLAG_RETRY_NOWAIT was set in the page fault
flags, when VM_FAULT_RETRY is returned, the mmap_sem wasn't actually
released (even if nonblocking is not NULL). So it sets *nonblocking to
zero and the caller won't release the mmap_sem thinking it was already
released, but it wasn't because of FOLL_NOWAIT.
Link: http://lkml.kernel.org/r/20180302174343.5421-2-aarcange@redhat.com
Fixes:
ce53053ce378c ("kvm: switch get_user_page_nowait() to get_user_pages_unlocked()")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kees Cook [Fri, 9 Mar 2018 23:51:02 +0000 (15:51 -0800)]
lib/bug.c: exclude non-BUG/WARN exceptions from report_bug()
Commit
b8347c219649 ("x86/debug: Handle warnings before the notifier
chain, to fix KGDB crash") changed the ordering of fixups, and did not
take into account the case of x86 processing non-WARN() and non-BUG()
exceptions. This would lead to output of a false BUG line with no other
information.
In the case of a refcount exception, it would be immediately followed by
the refcount WARN(), producing very strange double-"cut here":
lkdtm: attempting bad refcount_inc() overflow
------------[ cut here ]------------
Kernel BUG at
0000000065f29de5 [verbose debug info unavailable]
------------[ cut here ]------------
refcount_t overflow at lkdtm_REFCOUNT_INC_OVERFLOW+0x6b/0x90 in cat[3065], uid/euid: 0/0
WARNING: CPU: 0 PID: 3065 at kernel/panic.c:657 refcount_error_report+0x9a/0xa4
...
In the prior ordering, exceptions were searched first:
do_trap_no_signal(struct task_struct *tsk, int trapnr, char *str,
...
if (fixup_exception(regs, trapnr))
return 0;
- if (fixup_bug(regs, trapnr))
- return 0;
-
As a result, fixup_bugs()'s is_valid_bugaddr() didn't take into account
needing to search the exception list first, since that had already
happened.
So, instead of searching the exception list twice (once in
is_valid_bugaddr() and then again in fixup_exception()), just add a
simple sanity check to report_bug() that will immediately bail out if a
BUG() (or WARN()) entry is not found.
Link: http://lkml.kernel.org/r/20180301225934.GA34350@beast
Fixes:
b8347c219649 ("x86/debug: Handle warnings before the notifier chain, to fix KGDB crash")
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Richard Weinberger <richard.weinberger@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kees Cook [Fri, 9 Mar 2018 23:50:59 +0000 (15:50 -0800)]
bug: use %pB in BUG and stack protector failure
The BUG and stack protector reports were still using a raw %p. This
changes it to %pB for more meaningful output.
Link: http://lkml.kernel.org/r/20180301225704.GA34198@beast
Fixes:
ad67b74d2469 ("printk: hash addresses printed with %p")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Richard Weinberger <richard.weinberger@gmail.com>,
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 9 Mar 2018 23:50:55 +0000 (15:50 -0800)]
hugetlb: fix surplus pages accounting
Dan Rue has noticed that libhugetlbfs test suite fails counter test:
# mount_point="/mnt/hugetlb/"
# echo 200 > /proc/sys/vm/nr_hugepages
# mkdir -p "${mount_point}"
# mount -t hugetlbfs hugetlbfs "${mount_point}"
# export LD_LIBRARY_PATH=/root/libhugetlbfs/libhugetlbfs-2.20/obj64
# /root/libhugetlbfs/libhugetlbfs-2.20/tests/obj64/counters
Starting testcase "/root/libhugetlbfs/libhugetlbfs-2.20/tests/obj64/counters", pid 3319
Base pool size: 0
Clean...
FAIL Line 326: Bad HugePages_Total: expected 0, actual 1
The bug was bisected to
0c397daea1d4 ("mm, hugetlb: further simplify
hugetlb allocation API").
The reason is that alloc_surplus_huge_page() misaccounts per node
surplus pages. We should increase surplus_huge_pages_node rather than
nr_huge_pages_node which is already handled by alloc_fresh_huge_page.
Link: http://lkml.kernel.org/r/20180221191439.GM2231@dhcp22.suse.cz
Fixes:
0c397daea1d4 ("mm, hugetlb: further simplify hugetlb allocation API")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Dan Rue <dan.rue@linaro.org>
Tested-by: Dan Rue <dan.rue@linaro.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Leon Romanovsky [Wed, 7 Mar 2018 13:29:09 +0000 (15:29 +0200)]
RDMA/mlx5: Fix integer overflow while resizing CQ
The user can provide very large cqe_size which will cause to integer
overflow as it can be seen in the following UBSAN warning:
=======================================================================
UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/cq.c:1192:53
signed integer overflow:
64870 * 65536 cannot be represented in type 'int'
CPU: 0 PID: 267 Comm: syzkaller605279 Not tainted 4.15.0+ #90 Hardware
name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
Call Trace:
dump_stack+0xde/0x164
? dma_virt_map_sg+0x22c/0x22c
ubsan_epilogue+0xe/0x81
handle_overflow+0x1f3/0x251
? __ubsan_handle_negate_overflow+0x19b/0x19b
? lock_acquire+0x440/0x440
mlx5_ib_resize_cq+0x17e7/0x1e40
? cyc2ns_read_end+0x10/0x10
? native_read_msr_safe+0x6c/0x9b
? cyc2ns_read_end+0x10/0x10
? mlx5_ib_modify_cq+0x220/0x220
? sched_clock_cpu+0x18/0x200
? lookup_get_idr_uobject+0x200/0x200
? rdma_lookup_get_uobject+0x145/0x2f0
ib_uverbs_resize_cq+0x207/0x3e0
? ib_uverbs_ex_create_cq+0x250/0x250
ib_uverbs_write+0x7f9/0xef0
? cyc2ns_read_end+0x10/0x10
? print_irqtrace_events+0x280/0x280
? ib_uverbs_ex_create_cq+0x250/0x250
? uverbs_devnode+0x110/0x110
? sched_clock_cpu+0x18/0x200
? do_raw_spin_trylock+0x100/0x100
? __lru_cache_add+0x16e/0x290
__vfs_write+0x10d/0x700
? uverbs_devnode+0x110/0x110
? kernel_read+0x170/0x170
? sched_clock_cpu+0x18/0x200
? security_file_permission+0x93/0x260
vfs_write+0x1b0/0x550
SyS_write+0xc7/0x1a0
? SyS_read+0x1a0/0x1a0
? trace_hardirqs_on_thunk+0x1a/0x1c
entry_SYSCALL_64_fastpath+0x1e/0x8b
RIP: 0033:0x433549
RSP: 002b:
00007ffe63bd1ea8 EFLAGS:
00000217
=======================================================================
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: <stable@vger.kernel.org> # 3.13
Fixes:
bde51583f49b ("IB/mlx5: Add support for resize CQ")
Reported-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Doug Ledford [Fri, 9 Mar 2018 23:07:46 +0000 (18:07 -0500)]
Revert "RDMA/mlx5: Fix integer overflow while resizing CQ"
The original commit of this patch has a munged log message that is
missing several of the tags the original author intended to be on the
patch. This was due to patchworks misinterpreting a cut-n-paste
separator line as an end of message line and munging the mbox that was
used to import the patch:
https://patchwork.kernel.org/patch/
10264089/
The original patch will be reapplied with a fixed commit message so the
proper tags are applied.
This reverts commit
aa0de36a40f446f5a21a7c1e677b98206e242edb.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Linus Torvalds [Fri, 9 Mar 2018 21:31:08 +0000 (13:31 -0800)]
Merge tag 'pci-v4.16-fixes-3' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- fix sparc build issue when OF_IRQ not enabled (Guenter Roeck)
- fix enumeration of devices below switches on DesignWare-based
controllers (Koen Vandeputte)
* tag 'pci-v4.16-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: dwc: Fix enumeration end when reaching root subordinate
PCI: Move of_irq_parse_and_map_pci() declaration under OF_IRQ
Linus Torvalds [Fri, 9 Mar 2018 21:25:21 +0000 (13:25 -0800)]
Merge tag 'fbdev-v4.16-rc5' of git://github.com/bzolnier/linux
Pull fbdev fix from Bartlomiej Zolnierkiewicz:
"Just a single fix to close a kernel data leak in FBIOGETCMAP_SPARC
ioctl"
* tag 'fbdev-v4.16-rc5' of git://github.com/bzolnier/linux:
fbdev: Fixing arbitrary kernel leak in case FBIOGETCMAP_SPARC in sbusfb_ioctl_helper().
Linus Torvalds [Fri, 9 Mar 2018 21:18:02 +0000 (13:18 -0800)]
Merge tag 'drm-fixes-for-v4.16-rc5' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"There are a small set of sun4i and i915 fixes, and many more amdgpu
fixes:
sun4i:
- divide by zero fix
- clock and LVDS fixes
i915:
- fix for perf
- race fix
amdgpu:
- a bit more than we are normally comfortable with at this point,
however it does fix a lot of display issues with the new DC code
which result in black screens in various configurations along with
some run of the mill gpu configuration fixes.
I'm happy enough that the fixes are limited to the DC code and
should fix a bunch of issues on the new raven ridge APUs that we
are seeing shipped now"
* tag 'drm-fixes-for-v4.16-rc5' of git://people.freedesktop.org/~airlied/linux: (42 commits)
drm/amd/display: validate plane format on primary plane
drm/amdgpu:Always save uvd vcpu_bo in VM Mode
drm/amdgpu:Correct max uvd handles
drm/amd/display: early return if not in vga mode in disable_vga
drm/amd/display: Fix takover from VGA mode
drm/amd/display: Fix memleaks when atomic check fails.
drm/amd/display: Return success when enabling interrupt
drm/amd/display: Use crtc enable/disable_vblank hooks
drm/amd/display: update infoframe after dig fe is turned on
drm/amd/display: fix boot-up on vega10
drm/amd/display: fix cursor related Pstate hang
drm/amd/display: Set irq state only on existing crtcs
drm/amd/display: Fixed non-native modes not lighting up
drm/amd/display: Call update_stream_signal directly from amdgpu_dm
drm/amd/display: Make create_stream_for_sink more consistent
drm/amd/display: Don't block dual-link DVI modes
drm/amd/display: Don't allow dual-link DVI on all ASICs.
drm/amd/display: Pass signal directly to enable_tmds_output
drm/amd/display: Remove unnecessary fail labels in create_stream_for_sink
drm/amd/display: Move MAX_TMDS_CLOCK define to header
...
Linus Torvalds [Fri, 9 Mar 2018 18:01:59 +0000 (10:01 -0800)]
Merge tag 'sound-4.16-rc5' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Two type of fixes:
- The usual stuff, a handful HD-audio quirks for various machines
- Further hardening against ALSA sequencer ioctl/write races that are
triggered by fuzzer"
* tag 'sound-4.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: add dock and led support for HP ProBook 640 G2
ALSA: hda: add dock and led support for HP EliteBook 820 G3
ALSA: hda/realtek - Make dock sound work on ThinkPad L570
ALSA: seq: Remove superfluous snd_seq_queue_client_leave_cells() call
ALSA: seq: More protection for concurrent write and ioctl races
ALSA: seq: Don't allow resizing pool in use
ALSA: hda/realtek - Fix dock line-out volume on Dell Precision 7520
ALSA: hda/realtek: Limit mic boost on T480
ALSA: hda/realtek - Add headset mode support for Dell laptop
ALSA: hda/realtek - Add support headset mode for DELL WYSE
ALSA: hda - Fix a wrong FIXUP for alc289 on Dell machines
Marc Zyngier [Fri, 9 Mar 2018 15:40:50 +0000 (15:40 +0000)]
arm64: Relax ARM_SMCCC_ARCH_WORKAROUND_1 discovery
A recent update to the ARM SMCCC ARCH_WORKAROUND_1 specification
allows firmware to return a non zero, positive value to describe
that although the mitigation is implemented at the higher exception
level, the CPU on which the call is made is not affected.
Let's relax the check on the return value from ARCH_WORKAROUND_1
so that we only error out if the returned value is negative.
Fixes:
b092201e0020 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Matthew Wilcox [Fri, 2 Mar 2018 18:40:14 +0000 (10:40 -0800)]
Documentation/sphinx: Fix Directive import error
Sphinx 1.7 removed sphinx.util.compat.Directive so people
who have upgraded cannot build the documentation. Switch to
docutils.parsers.rst.Directive which has been available since
docutils 0.5 released in 2009.
Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=
1083694
Co-developed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Linus Torvalds [Fri, 9 Mar 2018 17:46:14 +0000 (09:46 -0800)]
Merge branch 'overlayfs-linus' of git://git./linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"This fixes a corner case for NFS exporting (introduced in this cycle)
as well as fixing miscellaneous bugs"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: update Kconfig texts
ovl: redirect_dir=nofollow should not follow redirect for opaque lower
ovl: fix ptr_ret.cocci warnings
ovl: check ERR_PTR() return value from ovl_lookup_real()
ovl: check lower ancestry on encode of lower dir file handle
ovl: hash non-dir by lower inode for fsnotify
Linus Torvalds [Fri, 9 Mar 2018 17:37:29 +0000 (09:37 -0800)]
Merge tag 'xfs-4.16-fixes-3' of git://git./fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- Fix some iomap locking problems
- Don't allocate cow blocks when we're zeroing file data
* tag 'xfs-4.16-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: don't block on the ilock for RWF_NOWAIT
xfs: don't start out with the exclusive ilock for direct I/O
xfs: don't allocate COW blocks for zeroing holes or unwritten extents
Darren Hart (VMware) [Wed, 7 Mar 2018 02:01:04 +0000 (18:01 -0800)]
platform/x86: dell-smbios: Resolve dependency error on DCDBAS
When the DELL_SMBIOS_SMM backend is enabled, the DELL_SMBIOS symbol
depends on DELL_DCDBAS, and we must avoid the situation where
DELL_SMBIOS=y and DCDBAS=m.
Adding the conditional dependency to DELL_SMBIOS such as:
depends !DELL_SMBIOS_SMM || (DCDBAS || DCDBAS=n)
results in the Kconfig tooling complaining about a circular dependency,
although it appears to work in practice.
Avoid the errors by simplifying the dependency and forcing DELL_SMBIOS
to be <= DCDBAS if DCDBAS is enabled (thanks to Greg KH for the
suggestion).
Cc: Mario.Limonciello@dell.com
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Darren Hart (VMware) [Sat, 3 Mar 2018 01:40:32 +0000 (17:40 -0800)]
platform/x86: Allow for SMBIOS backend defaults
Avoid accidental configurations by setting default y for DELL_SMBIOS
backends. Avoid this impacting the default build size, by making them
dependent on DELL_SMBIOS, so they only appear when DELL_SMBIOS is
manually selected, or by DELL_LAPTOP or DELL_WMI.
While DELL_SMBIOS does have a prompt, it does not have any dependencies.
Keeping DELL_SMBIOS visible, despite being "select"ed by DELL_LAPTOP and
DELL_WMI, is a deliberate choice to provide context for the WMI and SMM
backends, which would otherwise appear to float without context within
the menu.
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Mario Limonciello [Tue, 27 Feb 2018 18:23:04 +0000 (12:23 -0600)]
platform/x86: dell-smbios: Link all dell-smbios-* modules together
Some race conditions were raised due to dell-smbios and its backends
not being ready by the time that a consumer would call one of the
exported methods.
To avoid this problem, guarantee that all initialization has been
done by linking them all together and running init for them all.
As part of this change the Kconfig needs to be adjusted so that
CONFIG_DELL_SMBIOS_SMM and CONFIG_DELL_SMBIOS_WMI are boolean
rather than modules.
CONFIG_DELL_SMBIOS is a visually selectable option again and both
CONFIG_DELL_SMBIOS_WMI and CONFIG_DELL_SMBIOS_SMM are optional.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
[dvhart: Update prompt and help text for DELL_SMBIOS_* backends]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Mario Limonciello [Tue, 27 Feb 2018 18:23:03 +0000 (12:23 -0600)]
platform/x86: dell-smbios: Rename dell-smbios source to dell-smbios-base
This is being done to faciliate a later change to link all the dell-smbios
drivers together.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Mario Limonciello [Tue, 27 Feb 2018 18:23:02 +0000 (12:23 -0600)]
platform/x86: dell-smbios: Correct some style warnings
WARNING: function definition argument 'struct calling_interface_buffer *'
should also have an identifier name
+ int (*call_fn)(struct calling_interface_buffer *);
WARNING: Block comments use * on subsequent lines
+ /* 4 bytes of table header, plus 7 bytes of Dell header,
plus at least
+ 6 bytes of entry */
WARNING: Block comments use a trailing */ on a separate line
+ 6 bytes of entry */
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Linus Torvalds [Fri, 9 Mar 2018 17:33:48 +0000 (09:33 -0800)]
Merge tag 'powerpc-4.16-5' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One notable fix to properly advertise our support for a new firmware
feature, caused by two series conflicting semantically but not
textually.
There's a new ioctl for the new ocxl driver, which is not a fix, but
needed to complete the userspace API and good to have before the
driver is in a released kernel.
Finally three minor selftest fixes, and a fix for intermittent build
failures for some obscure platforms, caused by a missing make
dependency.
Thanks to: Alastair D'Silva, Bharata B Rao, Guenter Roeck"
* tag 'powerpc-4.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: Fix vector5 in ibm architecture vector table
ocxl: Document the OCXL_IOCTL_GET_METADATA IOCTL
ocxl: Add get_metadata IOCTL to share OCXL information to userspace
selftests/powerpc: Skip the subpage_prot tests if the syscall is unavailable
selftests/powerpc: Fix missing clean of pmu/lib.o
powerpc/boot: Fix random libfdt related build errors
selftests/powerpc: Skip tm-trap if transactional memory is not enabled
Ross Zwisler [Fri, 9 Mar 2018 15:36:36 +0000 (08:36 -0700)]
loop: Fix lost writes caused by missing flag
The following commit:
commit
aa4d86163e4e ("block: loop: switch to VFS ITER_BVEC")
replaced __do_lo_send_write(), which used ITER_KVEC iterators, with
lo_write_bvec() which uses ITER_BVEC iterators. In this change, though,
the WRITE flag was lost:
- iov_iter_kvec(&from, ITER_KVEC | WRITE, &kvec, 1, len);
+ iov_iter_bvec(&i, ITER_BVEC, bvec, 1, bvec->bv_len);
This flag is necessary for the DAX case because we make decisions based on
whether or not the iterator is a READ or a WRITE in dax_iomap_actor() and
in dax_iomap_rw().
We end up going through this path in configurations where we combine a PMEM
device with 4k sectors, a loopback device and DAX. The consequence of this
missed flag is that what we intend as a write actually turns into a read in
the DAX code, so no data is ever written.
The very simplest test case is to create a loopback device and try and
write a small string to it, then hexdump a few bytes of the device to see
if the write took. Without this patch you read back all zeros, with this
you read back the string you wrote.
For XFS this causes us to fail or panic during the following xfstests:
xfs/074 xfs/078 xfs/216 xfs/217 xfs/250
For ext4 we have a similar issue where writes never happen, but we don't
currently have any xfstests that use loopback and show this issue.
Fix this by restoring the WRITE flag argument to iov_iter_bvec(). This
causes the xfstests to all pass.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Fixes: commit
aa4d86163e4e ("block: loop: switch to VFS ITER_BVEC")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Masahiro Yamada [Tue, 6 Mar 2018 11:20:33 +0000 (20:20 +0900)]
clocksource/atmel-st: Add 'depends on HAS_IOMEM' to fix unmet dependency
The ATMEL_ST config selects MFD_SYSCON, but does not depend on HAS_IOMEM.
Compile testing on architecture without HAS_IOMEM causes "unmet direct
dependencies" in Kconfig phase. Detected by "make ARCH=score allyesconfig".
Add the proper dependency to the ATMEL_ST config.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/1520335233-11277-1-git-send-email-yamada.masahiro@socionext.com
Boqun Feng [Fri, 9 Mar 2018 06:56:28 +0000 (14:56 +0800)]
rtmutex: Make rt_mutex_futex_unlock() safe for irq-off callsites
When running rcutorture with TREE03 config, CONFIG_PROVE_LOCKING=y, and
kernel cmdline argument "rcutorture.gp_exp=1", lockdep reports a
HARDIRQ-safe->HARDIRQ-unsafe deadlock:
================================
WARNING: inconsistent lock state
4.16.0-rc4+ #1 Not tainted
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
takes:
__schedule+0xbe/0xaf0
{IN-HARDIRQ-W} state was registered at:
_raw_spin_lock+0x2a/0x40
scheduler_tick+0x47/0xf0
...
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&rq->lock);
<Interrupt>
lock(&rq->lock);
*** DEADLOCK ***
1 lock held by rcu_torture_rea/724:
rcu_torture_read_lock+0x0/0x70
stack backtrace:
CPU: 2 PID: 724 Comm: rcu_torture_rea Not tainted 4.16.0-rc4+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
Call Trace:
lock_acquire+0x90/0x200
? __schedule+0xbe/0xaf0
_raw_spin_lock+0x2a/0x40
? __schedule+0xbe/0xaf0
__schedule+0xbe/0xaf0
preempt_schedule_irq+0x2f/0x60
retint_kernel+0x1b/0x2d
RIP: 0010:rcu_read_unlock_special+0x0/0x680
? rcu_torture_read_unlock+0x60/0x60
__rcu_read_unlock+0x64/0x70
rcu_torture_read_unlock+0x17/0x60
rcu_torture_reader+0x275/0x450
? rcutorture_booster_init+0x110/0x110
? rcu_torture_stall+0x230/0x230
? kthread+0x10e/0x130
kthread+0x10e/0x130
? kthread_create_worker_on_cpu+0x70/0x70
? call_usermodehelper_exec_async+0x11a/0x150
ret_from_fork+0x3a/0x50
This happens with the following even sequence:
preempt_schedule_irq();
local_irq_enable();
__schedule():
local_irq_disable(); // irq off
...
rcu_note_context_switch():
rcu_note_preempt_context_switch():
rcu_read_unlock_special():
local_irq_save(flags);
...
raw_spin_unlock_irqrestore(...,flags); // irq remains off
rt_mutex_futex_unlock():
raw_spin_lock_irq();
...
raw_spin_unlock_irq(); // accidentally set irq on
<return to __schedule()>
rq_lock():
raw_spin_lock(); // acquiring rq->lock with irq on
which means rq->lock becomes a HARDIRQ-unsafe lock, which can cause
deadlocks in scheduler code.
This problem was introduced by commit
02a7c234e540 ("rcu: Suppress
lockdep false-positive ->boost_mtx complaints"). That brought the user
of rt_mutex_futex_unlock() with irq off.
To fix this, replace the *lock_irq() in rt_mutex_futex_unlock() with
*lock_irq{save,restore}() to make it safe to call rt_mutex_futex_unlock()
with irq off.
Fixes:
02a7c234e540 ("rcu: Suppress lockdep false-positive ->boost_mtx complaints")
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Link: https://lkml.kernel.org/r/20180309065630.8283-1-boqun.feng@gmail.com
Francis Deslauriers [Fri, 9 Mar 2018 03:18:12 +0000 (22:18 -0500)]
x86/kprobes: Fix kernel crash when probing .entry_trampoline code
Disable the kprobe probing of the entry trampoline:
.entry_trampoline is a code area that is used to ensure page table
isolation between userspace and kernelspace.
At the beginning of the execution of the trampoline, we load the
kernel's CR3 register. This has the effect of enabling the translation
of the kernel virtual addresses to physical addresses. Before this
happens most kernel addresses can not be translated because the running
process' CR3 is still used.
If a kprobe is placed on the trampoline code before that change of the
CR3 register happens the kernel crashes because int3 handling pages are
not accessible.
To fix this, add the .entry_trampoline section to the kprobe blacklist
to prohibit the probing of code before all the kernel pages are
accessible.
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: mathieu.desnoyers@efficios.com
Cc: mhiramat@kernel.org
Link: http://lkml.kernel.org/r/1520565492-4637-2-git-send-email-francis.deslauriers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Song Liu [Tue, 6 Mar 2018 05:55:04 +0000 (21:55 -0800)]
perf/core: Fix ctx_event_type in ctx_resched()
In ctx_resched(), EVENT_FLEXIBLE should be sched_out when EVENT_PINNED is
added. However, ctx_resched() calculates ctx_event_type before checking
this condition. As a result, pinned events will NOT get higher priority
than flexible events.
The following shows this issue on an Intel CPU (where ref-cycles can
only use one hardware counter).
1. First start:
perf stat -C 0 -e ref-cycles -I 1000
2. Then, in the second console, run:
perf stat -C 0 -e ref-cycles:D -I 1000
The second perf uses pinned events, which is expected to have higher
priority. However, because it failed in ctx_resched(). It is never
run.
This patch fixes this by calculating ctx_event_type after re-evaluating
event_type.
Reported-by: Ephraim Park <ephiepark@fb.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <jolsa@redhat.com>
Cc: <kernel-team@fb.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes:
487f05e18aa4 ("perf/core: Optimize event rescheduling on active contexts")
Link: http://lkml.kernel.org/r/20180306055504.3283731-1-songliubraving@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jens Axboe [Fri, 9 Mar 2018 02:12:59 +0000 (19:12 -0700)]
Merge branch 'nvme-4.16-rc5' of git://git.infradead.org/nvme into for-linus
Pull NVMe fixes for this series from Keith:
"A few late fixes for 4.16:
* Reverting sysfs slave device links for native nvme multipathing.
The hidden disk attributes broke common user tools.
* A fix for a PPC pci error handling regression.
* Update pci interrupt count to consider the actual IRQ spread, fixing
potentially poor initial queue affinity.
* Off-by-one errors in nvme-fc queue sizes
* A fabrics discovery fix to be more tolerant with user tools."
* 'nvme-4.16-rc5' of git://git.infradead.org/nvme:
nvme_fc: rework sqsize handling
nvme-fabrics: Ignore nr_io_queues option for discovery controllers
Revert "nvme: create 'slaves' and 'holders' entries for hidden controllers"
nvme: pci: pass max vectors as num_possible_cpus() to pci_alloc_irq_vectors
nvme-pci: Fix EEH failure on ppc
Dave Airlie [Thu, 8 Mar 2018 23:23:02 +0000 (09:23 +1000)]
Merge branch 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Fixes for 4.16. A bit bigger than I would have liked, but most of that
is DC fixes which Harry helped me pull together from the past few weeks.
Highlights:
- Fix DL DVI with DC
- Various RV fixes for DC
- Overlay fixes for DC
- Fix HDMI2 handling on boards without HBR tables in the vbios
- Fix crash with pass-through on SI on amdgpu
- Fix RB harvesting on KV
- Fix hibernation failures on UVD with certain cards
* 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux: (35 commits)
drm/amd/display: validate plane format on primary plane
drm/amdgpu:Always save uvd vcpu_bo in VM Mode
drm/amdgpu:Correct max uvd handles
drm/amd/display: early return if not in vga mode in disable_vga
drm/amd/display: Fix takover from VGA mode
drm/amd/display: Fix memleaks when atomic check fails.
drm/amd/display: Return success when enabling interrupt
drm/amd/display: Use crtc enable/disable_vblank hooks
drm/amd/display: update infoframe after dig fe is turned on
drm/amd/display: fix boot-up on vega10
drm/amd/display: fix cursor related Pstate hang
drm/amd/display: Set irq state only on existing crtcs
drm/amd/display: Fixed non-native modes not lighting up
drm/amd/display: Call update_stream_signal directly from amdgpu_dm
drm/amd/display: Make create_stream_for_sink more consistent
drm/amd/display: Don't block dual-link DVI modes
drm/amd/display: Don't allow dual-link DVI on all ASICs.
drm/amd/display: Pass signal directly to enable_tmds_output
drm/amd/display: Remove unnecessary fail labels in create_stream_for_sink
drm/amd/display: Move MAX_TMDS_CLOCK define to header
...
Dave Airlie [Thu, 8 Mar 2018 23:22:44 +0000 (09:22 +1000)]
Merge tag 'drm-misc-fixes-2018-03-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
sun4i fixes on clk, division by zero and LVDS.
* tag 'drm-misc-fixes-2018-03-07' of git://anongit.freedesktop.org/drm/drm-misc:
drm/sun4i: crtc: Call drm_crtc_vblank_on / drm_crtc_vblank_off
drm/sun4i: rgb: Fix potential division by zero
drm/sun4i: tcon: Reduce the scope of the LVDS error a bit
drm/sun4i: Release exclusive clock lock when disabling TCON
drm/sun4i: Fix dclk_set_phase
Dave Airlie [Thu, 8 Mar 2018 23:22:19 +0000 (09:22 +1000)]
Merge tag 'drm-intel-fixes-2018-03-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- 2 fixes: 1 for perf and 1 execlist submission race.
* tag 'drm-intel-fixes-2018-03-07' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Suspend submission tasklets around wedging
drm/i915/perf: fix perf stream opening lock
Linus Torvalds [Thu, 8 Mar 2018 18:03:12 +0000 (10:03 -0800)]
Merge tag 'mips_fixes_4.16_4' of git://git./linux/kernel/git/jhogan/mips
Pull MIPS fixes from James Hogan:
"A miscellaneous pile of MIPS fixes for 4.16:
- move put_compat_sigset() to evade hardened usercopy warnings (4.16)
- select ARCH_HAVE_PC_{SERIO,PARPORT} for Loongson64 platforms (4.16)
- fix kzalloc() failure handling in ath25 (3.19) and Octeon (4.0)
- fix disabling of IPIs during BMIPS suspend (3.19)"
* tag 'mips_fixes_4.16_4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
MIPS: BMIPS: Do not mask IPIs during suspend
MIPS: Loongson64: Select ARCH_MIGHT_HAVE_PC_SERIO
MIPS: Loongson64: Select ARCH_MIGHT_HAVE_PC_PARPORT
signals: Move put_compat_sigset to compat.h to silence hardened usercopy
MIPS: OCTEON: irq: Check for null return on kzalloc allocation
MIPS: ath25: Check for kzalloc allocation failure
Linus Torvalds [Thu, 8 Mar 2018 18:00:47 +0000 (10:00 -0800)]
Merge tag 'chrome-platform-4.16-rc4-fixes' of git://git./linux/kernel/git/bleung/chrome-platform
Pull chrome platform fix from Benson Leung:
"Revert a problematic patch that constified something imporperly"
* tag 'chrome-platform-4.16-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
Revert "platform/chrome: chromeos_laptop: make chromeos_laptop const"
Trond Myklebust [Wed, 7 Mar 2018 20:22:31 +0000 (15:22 -0500)]
NFS: Fix unstable write completion
We do want to respect the FLUSH_SYNC argument to nfs_commit_inode() to
ensure that all outstanding COMMIT requests to the inode in question are
complete. Currently we may exit early from both nfs_commit_inode() and
nfs_write_inode() even if there are COMMIT requests in flight, or unstable
writes on the commit list.
In order to get the right semantics w.r.t. sync_inode(), we don't need
to have nfs_commit_inode() reset the inode dirty flags when called from
nfs_wb_page() and/or nfs_wb_all(). We just need to ensure that
nfs_write_inode() leaves them in the right state if there are outstanding
commits, or stable pages.
Reported-by: Scott Mayhew <smayhew@redhat.com>
Fixes:
dc4fd9ab01ab ("nfs: don't wait on commit in nfs_commit_inode()...")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>