OSDN Git Service
Takashi Iwai [Sun, 25 Jan 2015 17:41:26 +0000 (18:41 +0100)]
ALSA: line6: Minor tidy up in line6_probe()
Move the check of multi configurations before snd_card_new() as a
short path, and reduce superfluous pointer references.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Sun, 25 Jan 2015 17:36:29 +0000 (18:36 +0100)]
ALSA: line6: Let snd_card_new() allocate private data
Instead of allocating the private data individually in each driver's
probe at first, let snd_card_new() allocate the data that is called in
line6_probe(). This simplifies the primary probe functions.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Sun, 25 Jan 2015 17:22:58 +0000 (18:22 +0100)]
ALSA: line6: Drop interface argument from private_init and disconnect callbacks
The interface argument is used just for retrieving the assigned
device, which can be already found in line6->ifcdev. Drop them from
the callbacks. Also, pass the usb id to private_init so that the
driver can deal with it there. This is a preliminary work for the
further cleanup to move the whole allocation into driver.c.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 23 Jan 2015 15:58:30 +0000 (16:58 +0100)]
ALSA: line6: Skip volume manipulation during silence copying
A minor optimization; while pausing, the driver just copies the zero
that doesn't need any volume changes.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 23 Jan 2015 15:54:36 +0000 (16:54 +0100)]
ALSA: line6: Do clipping in volume / monitor manipulations
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 23 Jan 2015 15:25:03 +0000 (16:25 +0100)]
ALSA: line6: Consolidate PCM stream buffer allocation and free
The PCM stream buffer allocation and free are identical for both
playback and capture streams. Provide single helper functions.
These are used only in pcm.c, thus they can be even static.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 23 Jan 2015 15:20:50 +0000 (16:20 +0100)]
ALSA: line6: Use dev_err()
This is the last remaining snd_printk() usage in this driver.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 23 Jan 2015 15:18:42 +0000 (16:18 +0100)]
ALSA: line6: Consolidate URB unlink and sync helpers
The codes to unlink and sync URBs are identical for both playback and
capture streams. Consolidate to single helper functions.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 23 Jan 2015 15:10:57 +0000 (16:10 +0100)]
ALSA: line6: Rearrange PCM structure
Introduce a new line6_pcm_stream structure and group individual
fields of snd_line6_pcm struct to playback and capture groups.
This patch itself just does rename and nothing else. More
meaningful cleanups based on these fields shuffling will follow.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 23 Jan 2015 14:12:13 +0000 (15:12 +0100)]
ALSA: line6: Drop voodoo workarounds
If the problem still really remains, we should fix it instead of
papering over it like this...
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 23 Jan 2015 14:08:40 +0000 (15:08 +0100)]
ALSA: line6: Use incremental loop
Using a decremental loop without particular reasons worsens the
readability a lot. Use incremental loops instead.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 23 Jan 2015 13:49:22 +0000 (14:49 +0100)]
ALSA: line6: Drop superfluous spinlock for trigger
The trigger callback is already spinlocked, so we need no more lock
here (even for the linked substreams). Let's drop it.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 23 Jan 2015 13:34:42 +0000 (14:34 +0100)]
ALSA: line6: Fix the error recovery in line6_pcm_acquire()
line6_pcm_acquire() tries to restore the newly obtained resources at
the error path. But some flags aren't recorded and released properly
when the corresponding buffer is already present. These bits have to
be cleared in the error recovery, too.
Also, "flags_final" can be initialized to zero since we pass only the
subset of "channels" bits.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 23 Jan 2015 13:31:03 +0000 (14:31 +0100)]
ALSA: line6: Use logical OR
Fixed a few places using bits OR wrongly for condition checks.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 23 Jan 2015 12:00:03 +0000 (13:00 +0100)]
ALSA: line6: Fix missing error handling in line6_pcm_acquire()
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 23 Jan 2015 11:39:11 +0000 (12:39 +0100)]
ALSA: line6: Reduce superfluous spinlock in midi.c
The midi_transmit_lock is used always inside the send_urb_lock, thus
it doesn't play any role. Let's kill it. Also, rename
"send_urb_lock" as a more simple name "lock" since this is the only
lock for midi.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 23 Jan 2015 11:30:48 +0000 (12:30 +0100)]
ALSA: line6: Remove unused line6_nop_read()
The function isn't used any longer after rewriting from sysfs to leds
class in toneport.c.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 23 Jan 2015 11:27:39 +0000 (12:27 +0100)]
ALSA: line6: Fix memory leak at probe error path
Fix memory leak at probe error path by rearranging the call order in
line6_destruct() so that the common destructor is always called.
Also this simplifies the error path to a single goto label.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 23 Jan 2015 11:24:03 +0000 (12:24 +0100)]
ALSA: line6: Minor refactoring
Split some codes in the lengthy line6_probe().
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 20 Jan 2015 08:36:31 +0000 (09:36 +0100)]
ALSA: line6/toneport: Implement LED controls via LED class
Instead of non-standard sysfs, reimplement the LED controls on
TonePort as LED class devices.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 20 Jan 2015 07:55:06 +0000 (08:55 +0100)]
ALSA: line6/toneport: Fix wrong argument for toneport_has_led()
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 20 Jan 2015 08:09:27 +0000 (09:09 +0100)]
ALSA: line6: Don't forget to call driver's destructor at error path
Currently disconnect callback is used as a driver's destructor, and
this has to be called not only at the disconnection time but also at
the error paths during probe.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 20 Jan 2015 08:40:20 +0000 (09:40 +0100)]
ALSA: line6/toneport: Move setup_timer() at the beginning
... so that timer_del_sync() in the destructor can be called safely at
any time. Also move the mod_timer() call in toneport_setup(), which
is a bit clearer place.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 20 Jan 2015 07:42:42 +0000 (08:42 +0100)]
ALSA: line6: Remove superfluous NULL checks in each driver
The interface and driver objects are always set when callbacks are
called. Drop such superfluous NULL checks in init and disconnect
calls of each driver.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 20 Jan 2015 08:58:54 +0000 (09:58 +0100)]
ALSA: line6: Abort if inconsistent usbdev is found at disconnect
It's utterly unsafe to proceed further the disconnect procedure if the
assigned usbdev is inconsistent with the expected object. Better to
put a WARN_ON() for more cautions and abort immediately.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 20 Jan 2015 07:40:51 +0000 (08:40 +0100)]
ALSA: line6: Yet more cleanup of superfluous NULL checks
... in line6_disconnect() as well.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Tue, 20 Jan 2015 08:20:50 +0000 (02:20 -0600)]
ALSA: line6: Remove driver version from header comment
The driver version string was removed in an ealier commit for being
useless. These are equally useless.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Tue, 20 Jan 2015 08:20:49 +0000 (02:20 -0600)]
ALSA: line6: Refer to manufacturer as "Line 6"
The correct spelling includes the space. Fix this in strings and
comments that refer to the manufacturer.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Tue, 20 Jan 2015 08:20:48 +0000 (02:20 -0600)]
ALSA: line6: Remove superfluous NULL checks
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 19 Jan 2015 15:38:23 +0000 (16:38 +0100)]
ALSA: line6: Drop line6_send_program() and line6_transmit_parameter()
Both functions are used nowhere.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 19 Jan 2015 15:36:21 +0000 (16:36 +0100)]
ALSA: line6: Make line6_send_raw_message() static
It's used only locally.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 19 Jan 2015 15:15:54 +0000 (16:15 +0100)]
ALSA: line6: Sync PCM stop at disconnect
Call line6_pcm_disconnect() at disconnect to make sure that all URBs
are cleared. Also reduce the superfluous snd_pcm_stop() calls from
the function (and remove the unused function) since the streams are
guaranteed to be stopped at this point via snd_card_disconnect().
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 19 Jan 2015 15:12:19 +0000 (16:12 +0100)]
ALSA: line6: Remove superfluous disconnect call in suspend handler
Calling line6_pcm_disconnect() at suspend callback is superfluous and
rather confusing. Let's get rid of it.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 19 Jan 2015 15:08:02 +0000 (16:08 +0100)]
ALSA: line6: Remove CHECK_RETURN macro
Such a macro doesn't improve readability.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 19 Jan 2015 15:06:03 +0000 (16:06 +0100)]
ALSA: line6: Drop MISSING_CASE macro
Such a debug is needed in the core code, not in each lowlevel driver.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 19 Jan 2015 15:02:36 +0000 (16:02 +0100)]
ALSA: line6: Remove driver version string
This is rather useless for a driver that has been already merged into
the official tree.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 19 Jan 2015 14:54:00 +0000 (15:54 +0100)]
ALSA: line6: Reorganize card resource handling
This is a fairly big rewrite regarding the card resource management in
line6 drivers:
- The card creation is moved into line6_probe(). This adds the global
destructor to private_free, so that each driver doesn't have to call
it any longer.
- The USB disconnect callback handles the card release, thus each
driver needs to concentrate on only its own resources. No need to
snd_card_*() call in the destructor.
- Fix the potential stall in disconnection by removing
snd_card_free(). It's replaced with snd_card_free_when_closed()
for asynchronous release.
- The only remaining operation for the card in each driver is the call
of snd_card_register(). All the rest are dealt in the common module
by itself.
- These ended up with removal of audio.[ch] as a result of a reduction
of one layer. Each driver just needs to call line6_probe().
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 19 Jan 2015 14:15:21 +0000 (15:15 +0100)]
ALSA: line6: Drop superfluous irqsave/irqrestore in PCM trigger callback
The PCM trigger callback is guaranteed to be called already in
spinlock / irq-disabled context.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 19 Jan 2015 14:11:17 +0000 (15:11 +0100)]
ALSA: line6: Don't handle PCM trigger for other cards
Otherwise it oopses.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 19 Jan 2015 14:05:10 +0000 (15:05 +0100)]
ALSA: line6: Remove superfluous out-of-memory error messages
Kernel already shows the error in the common path.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 19 Jan 2015 14:02:30 +0000 (15:02 +0100)]
ALSA: line6: Drop usb_device sysfs symlink
It's non-standard and rather superfluous.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 19 Jan 2015 13:58:29 +0000 (14:58 +0100)]
ALSA: line6: Drop invalid SNDRV_PCM_INFO_RESUME flag
The line6 drivers don't support the full resume although they set
SNDRV_PCM_INFO_RESUME. These flags have to be dropped to inform
properly to the user-space.
Also, drop the CONFIG_PM in trigger callbacks, too, which are rather
superfluous.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 19 Jan 2015 13:50:31 +0000 (14:50 +0100)]
ALSA: line6: Drop superfluous snd_device for rawmidi
Like the previous fix for PCM, attach the card-specific resource into
rawmidi->private_data instead of handling in a snd_device object.
This simplifies the code and structure.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 19 Jan 2015 13:41:57 +0000 (14:41 +0100)]
ALSA: line6: Drop superfluous snd_device for PCM
Instead of handling the card-specific resource in snd_device, attach
it into pcm->private_data and release it directly in private_free.
This simplifies the code and structure.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 19 Jan 2015 13:28:25 +0000 (14:28 +0100)]
ALSA: line6: Handle impulse response via control API
Instead of sysfs and the conditional build with Kconfig, implement the
handling of the impulse response controls via control API, and always
enable the build. Two new controls, "Impulse Response Volume" and
"Impulse Response Period" are added as a replacement for the former
sysfs files.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 15 Jan 2015 07:22:31 +0000 (08:22 +0100)]
ALSA: line6: Split to each driver
Split to each individual driver for POD, PODHD, TonePort and Variax
with a core LINE6 helper module. The new modules follow the standard
ALSA naming rule with snd prefix: snd-usb-pod, snd-usb-podhd,
snd-usb-toneport and snd-usb-variax, together with the corresponding
CONFIG_SND_USB_* Kconfig items.
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 19 Jan 2015 10:44:40 +0000 (11:44 +0100)]
ALSA: line6: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 12 Jan 2015 21:29:57 +0000 (22:29 +0100)]
ALSA: move line6 usb driver into sound/usb
Promote line6 driver from staging to sound/usb/line6 directory, and
maintain through sound subsystem tree.
This commit just moves the code and adapts Makefile / Kconfig.
The further renames and misc cleanups will follow.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:43:00 +0000 (12:43 -0800)]
staging: line6: Make *_disconnect() functions static
Remove declarations from the header and move the definitions up in the
source so they need not be forward declared.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:59 +0000 (12:42 -0800)]
staging: line6: Call *_disconnect() via pointer
Which *_disconnect() to call on disconnect is known at initialization.
Add a function pointer to the `usb_line6' struct and use to call into
the appropriate logic instead of evaluating the conditional logic.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:58 +0000 (12:42 -0800)]
staging: line6: Call *_process_message() via pointer
Which *_process_message() function (if any) to call when data is
received is known at initialization. Add a function pointer to the
`usb_line6' struct and use to call into the appropriate logic instead
of evaluating the conditional logic for each message.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:57 +0000 (12:42 -0800)]
staging: line6: Pass *_process_message() `usb_line6' pointers
Casting the `struct usb_line6' pointer at the call point makes the code
difficult to read. This is substantially cleaned up by moving the cast
into the callees.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:56 +0000 (12:42 -0800)]
staging: line6: Pass *_init() `usb_line6' pointers
Casting the `struct usb_line6' pointer at the call point makes the code
difficult to read. This is substantially cleaned up by moving the cast
into the callees.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:55 +0000 (12:42 -0800)]
staging: line6: Move audio endpoints to properties
The device type can now be used to determine the addresses of the
audio endpoints for the interface. Drop the conditional logic and make
these values properties.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:54 +0000 (12:42 -0800)]
staging: line6: Remove stale Pocket POD PCM endpoints
Commit
1027f476f507 (staging: line6: sync with upstream) removed PCM
from the Pocket POD capabilities but left the endpoint configuration.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:53 +0000 (12:42 -0800)]
staging: line6: Move control endpoints to properties
The device type can now be used to determine the addresses of the
control endpoints for the interface. Drop the conditional logic and
make these values properties.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:52 +0000 (12:42 -0800)]
staging: line6: Move altsetting to properties
The device type can now be used to determine the altsetting for the
interface. Drop the conditional logic and make this value a property.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:51 +0000 (12:42 -0800)]
staging: line6: Filter on UX2 interfaces
The driver only supports interface 0 of the TonePort UX2 and POD Studio
UX2 devices. Use the device table to filter on this.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:50 +0000 (12:42 -0800)]
staging: line6: Filter on Pocket POD interface
The driver only supports interface 1 of the Pocket POD. Use the device
table to filter on this.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:49 +0000 (12:42 -0800)]
staging: line6: Split out POD HD500 interfaces
The driver uses a different altsetting depending on the interface. Add
device type entries for each of these.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:48 +0000 (12:42 -0800)]
staging: line6: Split out PODxt Live interfaces
The PODxt Live device has both a POD and a Variax interface. Add device
type entries for each of these.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:47 +0000 (12:42 -0800)]
staging: line6: List out capabilities individually
The `LINE6_CAP_CTRL_PCM_HW' macro combines three capabilities to save
horizontal space when defining the properties entries. Now that these
are no longer limited to single lines this is not such a concern.
Specify capabilities individually when defining each property for
better clarity.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:46 +0000 (12:42 -0800)]
staging: line6: Use explicit indexes when defining properties
Specify the index of the properties entry explicitly to define this
structure more robustly. Also, drop the `L6PROP' macro in favor of
initializing each member explicitly on its own line since horizontal
space is limited and more attributes will be added later.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:45 +0000 (12:42 -0800)]
staging: line6: Rename capability macros
Including "BIT" in the macro name is pointless. Replace with "CAP" to
provide some context for what its value represents.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:44 +0000 (12:42 -0800)]
staging: line6: Remove useless comments
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:43 +0000 (12:42 -0800)]
staging: line6: Remove idVendor and idProduct macros
These are now only used to build the device table. Each entry in this
table is already clearly documented as to what device it maps to so the
macros become unnecessary indirection.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:42 +0000 (12:42 -0800)]
staging: line6: Key off of device type
The driver currently uses the device's idProduct as input to several
switch statements. In some cases this is not sufficiently granular and
the interface number must be taken into account.
Store the device type in `usb_line6' and key off of it instead. New
types can then be added that map to specific interfaces on the device so
that this conditional logic can be flattened out.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:41 +0000 (12:42 -0800)]
staging: line6: Index properties array with device type
The current logic uses the index of the matched entry from the device
table as an offset to the corresponding properties entry. The values
of the new `line6_device_type' enum are ordered such that they can be
used as an index into either of these arrays. Drop the device entry
lookup logic and use the device type (via the .driver_info member)
instead.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:40 +0000 (12:42 -0800)]
staging: line6: Define a device type enum
Define an enum containing the supported devices and associate each entry
in the device table to the respective value.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:39 +0000 (12:42 -0800)]
staging: line6: Cleanup device table
Wrap USB_DEVICE to avoid repeating the Line 6 vendor ID.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:38 +0000 (12:42 -0800)]
staging: line6: Remove unsupported X3 devices
Support for these devices appears to have never been completed. Remove
them from the device table along with a minimal amount of supporting
code.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:37 +0000 (12:42 -0800)]
staging: line6: Remove line6_pod_transmit_paramter()
This function was no longer used as of commit
2807904441d4 (staging:
line6: drop MIDI parameter sysfs attrs).
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Chris Rorvick [Mon, 12 Jan 2015 20:42:36 +0000 (12:42 -0800)]
staging: line6: Remove `device_bit' from properties
The `device_bit' member was no longer used as of commit
2807904441d4
(staging: line6: drop MIDI parameter sysfs attrs).
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jonas Lundqvist [Mon, 12 Jan 2015 20:42:35 +0000 (12:42 -0800)]
Staging: line6: remove spaces before commas.
Fix three space prohibited errors in pcm.h found by checkpatch.pl.
Signed-off-by: Jonas Lundqvist <jonas@gannon.se>
Reviewed-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rickard Strandqvist [Mon, 12 Jan 2015 20:42:34 +0000 (12:42 -0800)]
staging: line6: toneport.c: Fix for possible null pointer dereference
The NULL check was done to late, and there it was a risk
of a possible null pointer dereference.
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Sun, 11 Jan 2015 20:44:53 +0000 (12:44 -0800)]
linux 3.19-rc4
Linus Torvalds [Sun, 11 Jan 2015 20:44:10 +0000 (12:44 -0800)]
Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"Three small fixes from over the Christmas period, and wiring up the
new execveat syscall for ARM"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8275/1: mm: fix PMD_SECT_RDONLY undeclared compile error
ARM: 8253/1: mm: use phys_addr_t type in map_lowmem() for kernel mem region
ARM: 8249/1: mm: dump: don't skip regions
ARM: wire up execveat syscall
Linus Torvalds [Sun, 11 Jan 2015 19:53:46 +0000 (11:53 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes: two vdso fixes, two kbuild fixes and a boot failure fix
with certain odd memory mappings"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, vdso: Use asm volatile in __getcpu
x86/build: Clean auto-generated processor feature files
x86: Fix mkcapflags.sh bash-ism
x86: Fix step size adjustment during initial memory mapping
x86_64, vdso: Fix the vdso address randomization algorithm
Linus Torvalds [Sun, 11 Jan 2015 19:51:49 +0000 (11:51 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc fixes: group scheduling corner case fix, two deadline scheduler
fixes, effective_load() overflow fix, nested sleep fix, 6144 CPUs
system fix"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix RCU stall upon -ENOMEM in sched_create_group()
sched/deadline: Avoid double-accounting in case of missed deadlines
sched/deadline: Fix migration of SCHED_DEADLINE tasks
sched: Fix odd values in effective_load() calculations
sched, fanotify: Deal with nested sleeps
sched: Fix KMALLOC_MAX_SIZE overflow during cpumask allocation
Linus Torvalds [Sun, 11 Jan 2015 19:47:45 +0000 (11:47 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also some kernel side fixes: uncore PMU
driver fix, user regs sampling fix and an instruction decoder fix that
unbreaks PEBS precise sampling"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes
perf/x86_64: Improve user regs sampling
perf: Move task_pt_regs sampling into arch code
x86: Fix off-by-one in instruction decoder
perf hists browser: Fix segfault when showing callchain
perf callchain: Free callchains when hist entries are deleted
perf hists: Fix children sort key behavior
perf diff: Fix to sort by baseline field by default
perf list: Fix --raw-dump option
perf probe: Fix crash in dwarf_getcfi_elf
perf probe: Fix to fall back to find probe point in symbols
perf callchain: Append callchains only when requested
perf ui/tui: Print backtrace symbols when segfault occurs
perf report: Show progress bar for output resorting
Linus Torvalds [Sun, 11 Jan 2015 19:46:31 +0000 (11:46 -0800)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
"A liblockdep fix and a mutex_unlock() mutex-debugging fix"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mutex: Always clear owner field upon mutex_unlock()
tools/liblockdep: Fix debug_check thinko in mutex destroy
Konstantin Khlebnikov [Sun, 11 Jan 2015 13:54:06 +0000 (16:54 +0300)]
mm: fix corner case in anon_vma endless growing prevention
Fix for BUG_ON(anon_vma->degree) splashes in unlink_anon_vmas() ("kernel
BUG at mm/rmap.c:399!") caused by commit
7a3ef208e662 ("mm: prevent
endless growth of anon_vma hierarchy")
Anon_vma_clone() is usually called for a copy of source vma in
destination argument. If source vma has anon_vma it should be already
in dst->anon_vma. NULL in dst->anon_vma is used as a sign that it's
called from anon_vma_fork(). In this case anon_vma_clone() finds
anon_vma for reusing.
Vma_adjust() calls it differently and this breaks anon_vma reusing
logic: anon_vma_clone() links vma to old anon_vma and updates degree
counters but vma_adjust() overrides vma->anon_vma right after that. As
a result final unlink_anon_vmas() decrements degree for wrong anon_vma.
This patch assigns ->anon_vma before calling anon_vma_clone().
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Reported-and-tested-by: Chris Clayton <chris2553@googlemail.com>
Reported-and-tested-by: Oded Gabbay <oded.gabbay@amd.com>
Reported-and-tested-by: Chih-Wei Huang <cwhuang@android-x86.org>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Daniel Forrest <dan.forrest@ssec.wisc.edu>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: stable@vger.kernel.org # to match back-porting of 7a3ef208e662
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 11 Jan 2015 19:33:57 +0000 (11:33 -0800)]
mm: Don't count the stack guard page towards RLIMIT_STACK
Commit
fee7e49d4514 ("mm: propagate error from stack expansion even for
guard page") made sure that we return the error properly for stack
growth conditions. It also theorized that counting the guard page
towards the stack limit might break something, but also said "Let's see
if anybody notices".
Somebody did notice. Apparently android-x86 sets the stack limit very
close to the limit indeed, and including the guard page in the rlimit
check causes the android 'zygote' process problems.
So this adds the (fairly trivial) code to make the stack rlimit check be
against the actual real stack size, rather than the size of the vma that
includes the guard page.
Reported-and-tested-by: Chih-Wei Huang <cwhuang@android-x86.org>
Cc: Jay Foad <jay.foad@gmail.com>
Cc: stable@kernel.org # to match back-porting of fee7e49d4514
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ingo Molnar [Sun, 11 Jan 2015 08:18:05 +0000 (09:18 +0100)]
Merge branch 'core/urgent' into locking/urgent, to collect all pending locking fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Sat, 10 Jan 2015 20:23:03 +0000 (12:23 -0800)]
Merge tag 'vfio-v3.19-rc4' of git://github.com/awilliam/linux-vfio
Pull VFIO fix from Alex Williamson:
"Fix PCI header check in vfio_pci_probe() (Wei Yang)"
* tag 'vfio-v3.19-rc4' of git://github.com/awilliam/linux-vfio:
vfio-pci: Fix the check on pci device type in vfio_pci_probe()
Linus Torvalds [Sat, 10 Jan 2015 19:59:25 +0000 (11:59 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"Just one fix: a qlogic busy wait regression"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
qla2xxx: fix busy wait regression
Linus Torvalds [Sat, 10 Jan 2015 05:23:27 +0000 (21:23 -0800)]
Merge tag 'sound-3.19-rc4' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"All a few small regression or stable fixes: a Nvidia HDMI ID addition,
a regression fix for CAIAQ stream count, a typo fix for GPIO setup
with STAC/IDT HD-audio codecs, and a Fireworks big-endian fix"
* tag 'sound-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: fireworks: fix an endianness bug for transaction length
ALSA: hda - Add new GPU codec ID 0x10de0072 to snd-hda
ALSA: hda - Fix wrong gpio_dir & gpio_mask hint setups for IDT/STAC codecs
ALSA: snd-usb-caiaq: fix stream count check
Linus Torvalds [Sat, 10 Jan 2015 05:18:48 +0000 (21:18 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:
- bounds checking fixes in logitech and roccat drivers, from Peter Wu
and Dan Carpenter
- double-kfree fix in i2c-hid driver on bus shutdown, from Mika
Westerberg
- a couple of various small driver fixes
- a few device id additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: roccat: potential out of bounds in pyra_sysfs_write_settings()
HID: Add a new id 0x501a for Genius MousePen i608X
HID: logitech-hidpp: prefix the name with "Logitech"
HID: logitech-hidpp: avoid unintended fall-through
HID: Allow HID_BATTERY_STRENGTH to be enabled
HID: i2c-hid: Do not free buffers in i2c_hid_stop()
HID: add battery quirk for USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO keyboard
HID: logitech-hidpp: check WTP report length
HID: logitech-dj: check report length
Linus Torvalds [Sat, 10 Jan 2015 05:13:34 +0000 (21:13 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"I'm briefly working between holidays and LCA, so this is close to a
couple of weeks of fixes,
Two sets of amdkfd fixes, this is a new feature this kernel, and this
pull fixes a few issues since it got merged, ordering when built-in to
kernel and also the iommu vs gpu ordering patch, it also reworks the
ioctl before the initial release.
Otherwise:
- radeon: some misc fixes all over, hdmi, 4k, dpm
- nouveau: mcp77 init fixes, oops fix, bug on fix, msi fix
- i915: power fixes, revert VGACNTR patch
Probably be quiteer next week since I'll be at LCA anyways"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (33 commits)
drm/amdkfd: rewrite kfd_ioctl() according to drm_ioctl()
drm/amdkfd: reformat IOCTL definitions to drm-style
drm/amdkfd: Do copy_to/from_user in general kfd_ioctl()
drm/radeon: integer underflow in radeon_cp_dispatch_texture()
drm/radeon: adjust default bapm settings for KV
drm/radeon: properly filter DP1.2 4k modes on non-DP1.2 hw
drm/radeon: fix sad_count check for dce3
drm/radeon: KV has three PPLLs (v2)
drm/amdkfd: unmap VMID<-->PASID when relesing VMID (non-HWS)
drm/radeon: Init amdkfd only if it was compiled
amdkfd: actually allocate longs for the pasid bitmask
drm/nouveau/nouveau: Do not BUG_ON(!spin_is_locked()) on UP
drm/nv4c/mc: disable msi
drm/nouveau/fb/ram/mcp77: enable NISO poller
drm/nouveau/fb/ram/mcp77: use carveout reg to determine size
drm/nouveau/fb/ram/mcp77: subclass nouveau_ram
drm/nouveau: wake up the card if necessary during gem callbacks
drm/nouveau/device: Add support for GK208B, resolves bug 86935
drm/nouveau: fix missing return statement in nouveau_ttm_tt_unpopulate
drm/nouveau/bios: fix oops on pre-nv50 chipsets
...
Linus Torvalds [Sat, 10 Jan 2015 04:57:58 +0000 (20:57 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Here is a handful of minor arm64 fixes discovered and fixed over the
Christmas break. The main part is adding some missing #includes that
we seem to be getting transitively but have started causing problems
in -next.
- Fix early mapping fixmap corruption by EFI runtime services
- Fix __NR_compat_syscalls off-by-one
- Add missing sanity checks for some 32-bit registers
- Add some missing #includes which we get transitively
- Remove unused prepare_to_copy() macro"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/efi: add missing call to early_ioremap_reset()
arm64: fix missing asm/io.h include in kernel/smp_spin_table.c
arm64: fix missing asm/alternative.h include in kernel/module.c
arm64: fix missing linux/bug.h include in asm/arch_timer.h
arm64: fix missing asm/pgtable-hwdef.h include in asm/processor.h
arm64: sanity checks: add missing AArch32 registers
arm64: Remove unused prepare_to_copy()
arm64: Correct __NR_compat_syscalls for bpf
Linus Torvalds [Sat, 10 Jan 2015 04:51:10 +0000 (20:51 -0800)]
Merge tag 'for_linus-3.19-rc4' of git://git./linux/kernel/git/jwessel/kgdb
Pull kgdb/kdb fixes from Jason Wessel:
"These have been around since 3.17 and in kgdb-next for the last 9
weeks and some will go back to -stable.
Summary of changes:
Cleanups
- kdb: Remove unused command flags, repeat flags and KDB_REPEAT_NONE
Fixes
- kgdb/kdb: Allow access on a single core, if a CPU round up is
deemed impossible, which will allow inspection of the now "trashed"
kernel
- kdb: Add enable mask for the command groups
- kdb: access controls to restrict sensitive commands"
* tag 'for_linus-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
kernel/debug/debug_core.c: Logging clean-up
kgdb: timeout if secondary CPUs ignore the roundup
kdb: Allow access to sensitive commands to be restricted by default
kdb: Add enable mask for groups of commands
kdb: Categorize kdb commands (similar to SysRq categorization)
kdb: Remove KDB_REPEAT_NONE flag
kdb: Use KDB_REPEAT_* values as flags
kdb: Rename kdb_register_repeat() to kdb_register_flags()
kdb: Rename kdb_repeat_t to kdb_cmdflags_t, cmd_repeat to cmd_flags
kdb: Remove currently unused kdbtab_t->cmd_flags
Linus Torvalds [Sat, 10 Jan 2015 02:10:48 +0000 (18:10 -0800)]
Merge branch 'for-3.19' of git://linux-nfs.org/~bfields/linux
Pull two nfsd bugfixes from Bruce Fields.
* 'for-3.19' of git://linux-nfs.org/~bfields/linux:
rpc: fix xdr_truncate_encode to handle buffer ending on page boundary
nfsd: fix fi_delegees leak when fi_had_conflict returns true
Linus Torvalds [Sat, 10 Jan 2015 01:55:00 +0000 (17:55 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client
Pull two Ceph fixes from Sage Weil:
"These are both pretty trivial: a sparse warning fix and size_t printk
thing"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
libceph: fix sparse endianness warnings
ceph: use %zu for len in ceph_fill_inline_data()
Linus Torvalds [Sat, 10 Jan 2015 01:46:07 +0000 (17:46 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"None of these are huge, but my commit does fix a regression from 3.18
that could cause lost files during log replay.
This also adds Dave Sterba to the list of Btrfs maintainers. It
doesn't mean we're doing things differently, but Dave has really been
helping with the maintainer workload for years"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: don't delay inode ref updates during log replay
Btrfs: correctly get tree level in tree_backref_for_extent
Btrfs: call inode_dec_link_count() on mkdir error path
Btrfs: abort transaction if we don't find the block group
Btrfs, scrub: uninitialized variable in scrub_extent_for_parity()
Btrfs: add more maintainers
Linus Torvalds [Fri, 9 Jan 2015 23:10:59 +0000 (15:10 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"12 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, vmscan: prevent kswapd livelock due to pfmemalloc-throttled process being killed
memcg: fix destination cgroup leak on task charges migration
mm: memcontrol: switch soft limit default back to infinity
mm/debug_pagealloc: remove obsolete Kconfig options
vfs: renumber FMODE_NONOTIFY and add to uniqueness check
arch/blackfin/mach-bf533/boards/stamp.c: add linux/delay.h
ocfs2: fix the wrong directory passed to ocfs2_lookup_ino_from_name() when link file
MAINTAINERS: update rydberg's addresses
mm: protect set_page_dirty() from ongoing truncation
mm: prevent endless growth of anon_vma hierarchy
exit: fix race between wait_consider_task() and wait_task_zombie()
ocfs2: remove bogus check in dlm_process_recovery_data
Victor Kamensky [Fri, 9 Jan 2015 17:55:45 +0000 (18:55 +0100)]
ARM: 8275/1: mm: fix PMD_SECT_RDONLY undeclared compile error
In v3.19-rc3 tree when CONFIG_ARM_LPAE and CONFIG_DEBUG_RODATA are enabled
image failed to compile with the following error:
arch/arm/mm/init.c:661:14: error: ‘PMD_SECT_RDONLY’ undeclared here (not in a function)
It seems that '
80d6b0c ARM: mm: allow text and rodata sections to be read-only'
and '
ded9477 ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE'
commits crossed.
80d6b0c uses PMD_SECT_RDONLY macro but
ded9477 renames it
and uses software bits L_PMD_SECT_RDONLY instead.
Fix is to use L_PMD_SECT_RDONLY instead PMD_SECT_RDONLY as
ded9477 does in
another places.
Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Dan Carpenter [Fri, 9 Jan 2015 12:32:31 +0000 (15:32 +0300)]
HID: roccat: potential out of bounds in pyra_sysfs_write_settings()
This is a static checker fix. We write some binary settings to the
sysfs file. One of the settings is the "->startup_profile". There
isn't any checking to make sure it fits into the
pyra->profile_settings[] array in the profile_activated() function.
I added a check to pyra_sysfs_write_settings() in both places because
I wasn't positive that the other callers were correct.
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Chris Wilson [Tue, 6 Jan 2015 10:29:35 +0000 (10:29 +0000)]
mutex: Always clear owner field upon mutex_unlock()
Currently if DEBUG_MUTEXES is enabled, the mutex->owner field is only
cleared iff debug_locks is active. This exposes a race to other users of
the field where the mutex->owner may be still set to a stale value,
potentially upsetting mutex_spin_on_owner() among others.
References: https://bugs.freedesktop.org/show_bug.cgi?id=87955
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1420540175-30204-1-git-send-email-chris@chris-wilson.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tetsuo Handa [Thu, 25 Dec 2014 06:51:21 +0000 (15:51 +0900)]
sched/fair: Fix RCU stall upon -ENOMEM in sched_create_group()
When alloc_fair_sched_group() in sched_create_group() fails,
free_sched_group() is called, and free_fair_sched_group() is called by
free_sched_group(). Since destroy_cfs_bandwidth() is called by
free_fair_sched_group() without calling init_cfs_bandwidth(),
RCU stall occurs at hrtimer_cancel():
INFO: rcu_sched self-detected stall on CPU { 1} (t=60000 jiffies g=13074 c=13073 q=0)
Task dump for CPU 1:
(fprintd) R running task 0 6249 1 0x00000088
...
Call Trace:
<IRQ> [<
ffffffff81094988>] sched_show_task+0xa8/0x110
[<
ffffffff81097acd>] dump_cpu_task+0x3d/0x50
[<
ffffffff810c3a80>] rcu_dump_cpu_stacks+0x90/0xd0
[<
ffffffff810c7751>] rcu_check_callbacks+0x491/0x700
[<
ffffffff810cbf2b>] update_process_times+0x4b/0x80
[<
ffffffff810db046>] tick_sched_handle.isra.20+0x36/0x50
[<
ffffffff810db0a2>] tick_sched_timer+0x42/0x70
[<
ffffffff810ccb19>] __run_hrtimer+0x69/0x1a0
[<
ffffffff810db060>] ? tick_sched_handle.isra.20+0x50/0x50
[<
ffffffff810ccedf>] hrtimer_interrupt+0xef/0x230
[<
ffffffff810452cb>] local_apic_timer_interrupt+0x3b/0x70
[<
ffffffff8164a465>] smp_apic_timer_interrupt+0x45/0x60
[<
ffffffff816485bd>] apic_timer_interrupt+0x6d/0x80
<EOI> [<
ffffffff810cc588>] ? lock_hrtimer_base.isra.23+0x18/0x50
[<
ffffffff81193cf1>] ? __kmalloc+0x211/0x230
[<
ffffffff810cc9d2>] hrtimer_try_to_cancel+0x22/0xd0
[<
ffffffff81193cf1>] ? __kmalloc+0x211/0x230
[<
ffffffff810ccaa2>] hrtimer_cancel+0x22/0x30
[<
ffffffff810a3cb5>] free_fair_sched_group+0x25/0xd0
[<
ffffffff8108df46>] free_sched_group+0x16/0x40
[<
ffffffff810971bb>] sched_create_group+0x4b/0x80
[<
ffffffff810aa383>] sched_autogroup_create_attach+0x43/0x1c0
[<
ffffffff8107dc9c>] sys_setsid+0x7c/0x110
[<
ffffffff81647729>] system_call_fastpath+0x12/0x17
Check whether init_cfs_bandwidth() was called before calling
destroy_cfs_bandwidth().
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
[ Move the check into destroy_cfs_bandwidth() to aid compilability. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Paul Turner <pjt@google.com>
Cc: Ben Segall <bsegall@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/201412252210.GCC30204.SOMVFFOtQJFLOH@I-love.SAKURA.ne.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Luca Abeni [Wed, 17 Dec 2014 10:50:32 +0000 (11:50 +0100)]
sched/deadline: Avoid double-accounting in case of missed deadlines
The dl_runtime_exceeded() function is supposed to ckeck if
a SCHED_DEADLINE task must be throttled, by checking if its
current runtime is <= 0. However, it also checks if the
scheduling deadline has been missed (the current time is
larger than the current scheduling deadline), further
decreasing the runtime if this happens.
This "double accounting" is wrong:
- In case of partitioned scheduling (or single CPU), this
happens if task_tick_dl() has been called later than expected
(due to small HZ values). In this case, the current runtime is
also negative, and replenish_dl_entity() can take care of the
deadline miss by recharging the current runtime to a value smaller
than dl_runtime
- In case of global scheduling on multiple CPUs, scheduling
deadlines can be missed even if the task did not consume more
runtime than expected, hence penalizing the task is wrong
This patch fix this problem by throttling a SCHED_DEADLINE task
only when its runtime becomes negative, and not modifying the runtime
Signed-off-by: Luca Abeni <luca.abeni@unitn.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: Dario Faggioli <raistlin@linux.it>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1418813432-20797-3-git-send-email-luca.abeni@unitn.it
Signed-off-by: Ingo Molnar <mingo@kernel.org>