OSDN Git Service
Alex Smith [Tue, 24 Sep 2013 08:30:38 +0000 (04:30 -0400)]
configure: Enable -Qansi-alias for icl 14+
Qansi-alias worked on 12.x, then caused miscompilation on 13.x, but now
works again passing all FATE tests for icl version 14.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Martin Storsjö [Mon, 23 Sep 2013 09:25:48 +0000 (12:25 +0300)]
h263dec: Remove a hack that can cause infinite loops
The actual usefulness of the hack is not known, and it does cause
infinite loops with some broken input files.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Sun, 22 Sep 2013 15:31:54 +0000 (18:31 +0300)]
movenchint: Clear size and len if the realloc failed
Previously these were left in an inconsistent state.
Pointed out by Michael Niedermayer.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Sun, 22 Sep 2013 11:44:17 +0000 (14:44 +0300)]
movenc: Return a proper error code for invalid combinations
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Sun, 22 Sep 2013 11:50:48 +0000 (14:50 +0300)]
vc1dec: Check the error handling flags on slice/field header decode errors
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Fri, 20 Sep 2013 09:26:45 +0000 (12:26 +0300)]
electronicarts: Check packet sizes before reading
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Fri, 20 Sep 2013 09:20:06 +0000 (12:20 +0300)]
lavf: Avoid setting avg_frame_rate if delta_dts is negative
This avoids setting avg_frame_rate to invalid (negative)
values.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Michael Niedermayer [Tue, 19 Feb 2013 20:40:09 +0000 (21:40 +0100)]
vc1dec: Don't decode slices when the latest slice header failed to decode
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Fri, 20 Sep 2013 08:32:25 +0000 (11:32 +0300)]
vc1dec: Make sure last_picture is initialized in vc1_decode_skip_blocks
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Fri, 20 Sep 2013 08:16:57 +0000 (11:16 +0300)]
vc1dec: Undo mpegvideo initialization if unable to allocate tables
Previously, s->context_initialized was left set to 1
if ff_vc1_decode_init_alloc_tables failed, skipping the
initialization completely on the next decode call.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Fri, 20 Sep 2013 08:16:00 +0000 (11:16 +0300)]
vc1dec: Fix leaks in ff_vc1_decode_init_alloc_tables on errors
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Thu, 19 Sep 2013 21:07:34 +0000 (00:07 +0300)]
wnv1: Make sure the input packet is large enough
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Tue, 10 Sep 2013 15:43:19 +0000 (18:43 +0300)]
movenc: Use keyframes as default fragmentation point in ismv
Fragmenting blindly to a certain duration isn't a good choice
if one should be able to switch between different qualities,
therefore default to keyframes instead.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Tue, 10 Sep 2013 12:56:19 +0000 (15:56 +0300)]
movenc: Set all implicit flags immediately in mov_write_header
This makes sure other sanity checks for conflicting options
can work properly, e.g. for the conflict between the faststart
flag when using the ismv mode.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Sat, 21 Sep 2013 22:29:33 +0000 (01:29 +0300)]
movenc: Set mov->mode earlier in mov_write_header
This allows simplifying some early checks that depend on the
muxer mode.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Sat, 21 Sep 2013 22:02:36 +0000 (01:02 +0300)]
tls: Do not abort on non-fatal TLS alerts with gnutls
Signed-off-by: Martin Storsjö <martin@martin.st>
Luca Barbato [Fri, 20 Sep 2013 21:14:41 +0000 (23:14 +0200)]
flv: Make onTextData parsing robust
Certain streaming servers do not preserve the order of the fields.
Luca Barbato [Sat, 21 Sep 2013 19:16:04 +0000 (21:16 +0200)]
rtmp: Replace a magic number with a macro
11 is the RTMP header size.
Luca Barbato [Sat, 21 Sep 2013 09:10:41 +0000 (11:10 +0200)]
rtmp: Rewrite embedded flv handling
Use update_offset() as done for rtmp audio, video and notifications and
read update and write the fields instead of replacing them in the rtmp
packet and then memcpying it to the output buffer.
Luca Barbato [Sat, 21 Sep 2013 09:09:39 +0000 (11:09 +0200)]
rtmp: Refactor get_packet
Luca Barbato [Sat, 21 Sep 2013 08:04:54 +0000 (10:04 +0200)]
rtmp: Support AMF_DATA_TYPE_MIXEDARRAY
And fix the AMF_DATA_TYPE_ARRAY parsing while at it.
A MIXEDARRAY type, as the ARRAY, store the number of elements in
an uint32 before the list. The ARRAY is strict and does not have
an OBJECT terminator, MIXEDARRAY behaves like an OBJECT type and
a different than stated number of element can be present.
Alex Smith [Sat, 21 Sep 2013 11:22:12 +0000 (07:22 -0400)]
avutil: Fix compilation with inline asm disabled on mingw
Because of -Werror=implicit-function-declaration the build will fail.
Signed-off-by: Martin Storsjö <martin@martin.st>
Kieran Kunhya [Tue, 17 Sep 2013 21:30:48 +0000 (16:30 -0500)]
lavu: Add interleaved 4:2:2 8/10-bit formats
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Vittorio Giovara [Fri, 20 Sep 2013 15:07:18 +0000 (17:07 +0200)]
h264dec: Add .avc file name extension
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Vittorio Giovara [Fri, 20 Sep 2013 15:28:04 +0000 (17:28 +0200)]
h264dec: K&R formatting cosmetics
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Martin Storsjö [Fri, 20 Sep 2013 11:02:41 +0000 (14:02 +0300)]
mem: Handle av_reallocp(..., 0) properly
Previously this did a double free (and returned an error).
Reported-by: Justin Ruggles
Signed-off-by: Martin Storsjö <martin@martin.st>
Vittorio Giovara [Fri, 20 Sep 2013 11:09:23 +0000 (13:09 +0200)]
h264: remove an unused static constant
Signed-off-by: Martin Storsjö <martin@martin.st>
Alex Smith [Thu, 19 Sep 2013 21:33:23 +0000 (17:33 -0400)]
msvc/icl: Use __declspec(noinline)
Signed-off-by: Martin Storsjö <martin@martin.st>
Alex Smith [Thu, 19 Sep 2013 20:58:21 +0000 (16:58 -0400)]
msvc/icl: Use __declspec(deprecated)
Prior to this on msvc/icl there was no handling of deprecated functions
and the deprecated warning was disabled.
After enabling there are a number of warnings relating to the CRT and
the use of the non-secure versions of several functions. Defining
_CRT_SECURE_NO_WARNINGS silences these warnings.
Signed-off-by: Martin Storsjö <martin@martin.st>
Luca Barbato [Fri, 20 Sep 2013 09:55:20 +0000 (11:55 +0200)]
rtmp: Unbreak get_packet
Commit
5626f994f273af80fb100d4743b963304de9e05c broke it.
Martin Storsjö [Thu, 19 Sep 2013 12:12:06 +0000 (15:12 +0300)]
dcadec: Validate the lfe parameter
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Thu, 19 Sep 2013 09:48:04 +0000 (12:48 +0300)]
rtmpproto: Add a comment explaining the logic in handle_notify
This explains why the cleanup in
5626f994f was wrong and why
ae0f316a was needed.
Signed-off-by: Martin Storsjö <martin@martin.st>
Luca Barbato [Thu, 12 Sep 2013 18:17:15 +0000 (20:17 +0200)]
build: Support cparser
Martin Storsjö [Thu, 19 Sep 2013 14:02:36 +0000 (17:02 +0300)]
r3d: Add more input value validation
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Thu, 19 Sep 2013 13:57:47 +0000 (16:57 +0300)]
rl2: Avoid a division by zero
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Thu, 19 Sep 2013 13:55:13 +0000 (16:55 +0300)]
wtv: Add more sanity checks for a length read from the file
Also make sure the existing length check can't overflow.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Thu, 19 Sep 2013 13:49:48 +0000 (16:49 +0300)]
yop: Clear all references to the AVBuffer in the local AVPacket
This makes sure that it doesn't try to free an AVBuffer belonging
to an earlier packet when we free the local packet at the end.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Thu, 19 Sep 2013 13:29:23 +0000 (16:29 +0300)]
fraps: Make the input buffer size checks more strict
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Thu, 19 Sep 2013 13:02:29 +0000 (16:02 +0300)]
segafilm: Validate the number of audio channels
This avoids divisions by zero later.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Thu, 19 Sep 2013 12:58:59 +0000 (15:58 +0300)]
svq3: Avoid a division by zero
If the height is zero, the decompression will probably end up
failing due to not fitting into the allocated buffer later
anyway, so this doesn't need any more elaborate check.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Thu, 19 Sep 2013 12:53:31 +0000 (15:53 +0300)]
qpeg: Add checks for running out of rows in qpeg_decode_inter
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Thu, 19 Sep 2013 12:32:02 +0000 (15:32 +0300)]
mpegaudiodec: Validate that the number of channels fits at the given offset
This is similar to the fix in
35cbc98b.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Thu, 19 Sep 2013 12:14:56 +0000 (15:14 +0300)]
asvdec: Verify the amount of extradata
The init function reads one byte of extradata.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Wed, 18 Sep 2013 19:02:17 +0000 (22:02 +0300)]
movenc: Use null buffers for measuring the amount of data to be written
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Wed, 18 Sep 2013 18:50:50 +0000 (21:50 +0300)]
aviobuf: Add functions for null buffers
Null buffers are useful for simulating writing to a real buffer
for the sake of measuring how many bytes are written.
Signed-off-by: Martin Storsjö <martin@martin.st>
Vladimir Pantelic [Thu, 19 Sep 2013 15:50:38 +0000 (17:50 +0200)]
asfenc: mux chapters in ASF files using an ASF "marker" section
ASF markers only have a start time, so we lose the chapter end times,
but that is ASF for you
Signed-off-by: Vladimir Pantelic <vladoman@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Vladimir Pantelic [Thu, 19 Sep 2013 15:50:37 +0000 (17:50 +0200)]
asfenc: remember send time and offset of the index entries
Signed-off-by: Vladimir Pantelic <vladoman@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Vladimir Pantelic [Thu, 19 Sep 2013 15:50:36 +0000 (17:50 +0200)]
asfenc: add ASF_Reserved_4 as defined in section 10.10 of the ASF spec
Signed-off-by: Vladimir Pantelic <vladoman@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Vladimir Pantelic [Thu, 19 Sep 2013 15:50:35 +0000 (17:50 +0200)]
asfdec: replace magic constant with DATA_HEADER_SIZE
Signed-off-by: Vladimir Pantelic <vladoman@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Vladimir Pantelic [Thu, 19 Sep 2013 15:50:34 +0000 (17:50 +0200)]
asfdec: substract preroll time from marker presentation time
this was forgotten when we changed ASF to not output the preroll time
Signed-off-by: Vladimir Pantelic <vladoman@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Martin Storsjö [Mon, 16 Sep 2013 13:05:18 +0000 (16:05 +0300)]
rv34: Fix a memory leak on errors
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Mon, 16 Sep 2013 11:53:15 +0000 (14:53 +0300)]
idroqdec: Make sure a video stream has been allocated before returning packets
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Mon, 16 Sep 2013 12:40:57 +0000 (15:40 +0300)]
rv10: Validate the dimensions set from the container
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Luca Barbato [Wed, 18 Sep 2013 23:49:41 +0000 (01:49 +0200)]
rtmp: Unbreak handle_notify
Commit
5626f994f273af80fb100d4743b963304de9e05c broke it.
Alex Converse [Mon, 16 Sep 2013 20:03:15 +0000 (13:03 -0700)]
aacdec: Add support for LD (Low Delay) AAC
Alex Converse [Mon, 16 Sep 2013 06:32:23 +0000 (23:32 -0700)]
aacdec: Add support for Error Resilience syntax.
This does not add support for any error resilience tools.
Justin Ruggles [Tue, 16 Apr 2013 17:12:26 +0000 (22:42 +0530)]
Add a WebP decoder
Container and lossy decoding by Aneesh Dogra <aneesh@sugarlabs.org>
Lossless decoding by Justin Ruggles <justin.ruggles@gmail.com>
Justin Ruggles [Mon, 16 Sep 2013 14:11:32 +0000 (10:11 -0400)]
lavc: add ff_u8_to_s8() for safe type punning of uint8_t to int8_t
Alexandra Khirnova [Wed, 18 Sep 2013 16:12:36 +0000 (18:12 +0200)]
avformat: Use av_reallocp() where suitable
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Martin Storsjö [Mon, 16 Sep 2013 17:58:38 +0000 (20:58 +0300)]
rmdec: Validate the fps value
Abort if it is invalid if strict error checking has been requested.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Mon, 9 Sep 2013 12:04:57 +0000 (15:04 +0300)]
movenc: Add an option for omitting the tfhd base offset
This makes the output fragments independent of their position in
the output stream, making the output work better when streamed.
QuickTime Player doesn't support fragmented mp4 without the base
data offset, though.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Mon, 9 Sep 2013 09:05:01 +0000 (12:05 +0300)]
movenc: Write the moof atom in two passes
This is a bit more work, but avoids having to fill in
the data offset field afterwards instead of directly when
the rest of the trun atom is written.
This simplifies future cases where this field needs to be set to
something different.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Tue, 17 Sep 2013 16:33:48 +0000 (19:33 +0300)]
twinvqdec: Check the ibps parameter separately
This is required, since invalid parameters actually could
pass the switch check below.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Josh Allmann [Tue, 17 Sep 2013 06:58:48 +0000 (23:58 -0700)]
rtmp: Support reading interleaved chunks.
A given packet won't always come in contiguously; sometimes
they may be broken up on chunk boundaries by packets of another
channel.
This support primarily involves tracking information about the
data that's been read, so the reader can pick up where it left
off for a given channel.
As a side effect, we no longer over-report the bytes read if
(toread = MIN(size, chunk_size)) == size
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Mon, 16 Sep 2013 18:27:49 +0000 (21:27 +0300)]
xmv: Add more sanity checks for parameters read from the bitstream
Since the number of channels is multiplied by 36 and assigned to
to a uint16_t, make sure this calculation didn't overflow. (In
certain cases the calculation could overflow leaving the
truncated block_align at 0, leading to divisions by zero later.)
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Tue, 17 Sep 2013 14:43:48 +0000 (17:43 +0300)]
rtmpproto: Extend a comment to explain the prev_pkt arrays roles
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Tue, 17 Sep 2013 13:53:11 +0000 (16:53 +0300)]
rtmpproto: Consistently use the right prev_pkt array
prev_pkt[0] is used for input packets, while prev_pkt[1] is
used for output.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Tue, 17 Sep 2013 12:07:10 +0000 (15:07 +0300)]
rtmpproto: Check for the right return code
Signed-off-by: Martin Storsjö <martin@martin.st>
John Stebbins [Wed, 4 Sep 2013 20:08:22 +0000 (13:08 -0700)]
dca_parser: Handle changes in DCA frame size
A change in framesize caused a perpetual loss of synchronization.
So read (and use) the frame size from the frame header instead of
setting it only once.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Martin Storsjö [Mon, 16 Sep 2013 13:17:05 +0000 (16:17 +0300)]
jpeg2000dec: Add more checks when parsing headers
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Luca Barbato [Tue, 17 Sep 2013 10:47:09 +0000 (12:47 +0200)]
doc: Add missing hashes and dates to APIChanges
Also fix the typo in the last entry version.
Martin Storsjö [Mon, 16 Sep 2013 18:46:50 +0000 (21:46 +0300)]
ffv1: Make sure at least one slice context is initialized
This avoids crashes when initializing the range coder for
the first slice context.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Mon, 16 Sep 2013 18:07:30 +0000 (21:07 +0300)]
eacmv: Make sure a reference frame exists before referencing it
This is similar to an existing check for the second-last frame
from
062421e3.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Mon, 16 Sep 2013 18:03:34 +0000 (21:03 +0300)]
truemotion2: Use av_freep properly in an error path
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Mon, 16 Sep 2013 17:40:13 +0000 (20:40 +0300)]
mpeg4videodec: Check the width/height in mpeg4_decode_sprite_trajectory
This avoids a potential division by zero.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Mon, 16 Sep 2013 17:32:35 +0000 (20:32 +0300)]
ivi_common: Make sure color planes have been initialized
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Mon, 16 Sep 2013 17:17:47 +0000 (20:17 +0300)]
mov: Don't use a negative duration for setting other fields
Some files have the duration set to -1 in the mdhd atom, more
or less legitimately. (We produce such files ourselves, for the
initial duration in fragmented mp4 files.)
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Mon, 16 Sep 2013 14:17:26 +0000 (17:17 +0300)]
oggparseogm: Convert to use bytestream2
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Mon, 16 Sep 2013 13:01:02 +0000 (16:01 +0300)]
rv34: Check the return value from ff_rv34_decode_init
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Mon, 16 Sep 2013 12:36:24 +0000 (15:36 +0300)]
matroskadec: Verify realaudio codec parameters
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Mon, 16 Sep 2013 12:19:52 +0000 (15:19 +0300)]
mace: Make sure that the channel count is set to a valid value
Also return a proper error code.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Mon, 16 Sep 2013 12:05:03 +0000 (15:05 +0300)]
svq3: Check for any negative return value from ff_h264_check_intra_pred_mode
Also pass on any returned error code.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Josh Allmann [Mon, 16 Sep 2013 20:20:58 +0000 (13:20 -0700)]
rtmp: rename main_channel_id to stream_id.
This more closely corresponds to the usage of the field.
Its usage here is unrelated to the channel ID.
Signed-off-by: Martin Storsjö <martin@martin.st>
Josh Allmann [Mon, 16 Sep 2013 20:20:57 +0000 (13:20 -0700)]
rtmp: Follow Flash player numbering for channels.
Channel 4 is typically used by the Flash player to transmit
audio, channel 6 for video, and various stream-specific invokes
get sent over channel 8, which is designated the source channel.
This more closely matches the behavior of the Flash player,
including the transmission of play requests over channel 8.
Signed-off-by: Martin Storsjö <martin@martin.st>
Josh Allmann [Mon, 16 Sep 2013 20:20:56 +0000 (13:20 -0700)]
rtmp: Send video on a separate channel.
Sending non-monotonic packets (e.g. when the audio and video
streams are monotonic within themselves but not muxed
monotonically) will lead to negative values the RTMP timestamp
field (where timestamps are transmitted only as deltas for each
channel), and this delta can end up being incorrectly written as
a large unsigned number.
Signed-off-by: Martin Storsjö <martin@martin.st>
Alexandra Khirnova [Thu, 12 Sep 2013 08:39:22 +0000 (10:39 +0200)]
lavf: Make probe_codec return an error code
This allows handling errors from av_realloc properly.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Mon, 16 Sep 2013 16:31:03 +0000 (19:31 +0300)]
x86: Add an xmm clobbering wrapper for avcodec_encode_video2
This is required since
187105ff8 when we started trying to
wrap this function as well.
Signed-off-by: Martin Storsjö <martin@martin.st>
Clément Bœsch [Sun, 24 Mar 2013 23:23:46 +0000 (00:23 +0100)]
lavf: Don't explicitly flush after each written packet in muxers
Since
596e5d4783, this is not necessary anymore. It also allows to
actually disable the flushing, improving write performance (but
possibly giving worse latency in real-time streaming).
Signed-off-by: Martin Storsjö <martin@martin.st>
Luca Barbato [Wed, 11 Sep 2013 12:02:06 +0000 (14:02 +0200)]
lavf: Add a flag to enable/disable per-packet flushing
This is enabled by default and can be disabled with
"-fflags -flush_packets".
Inspired by a patch from Nicolas George <nicolas.george@normalesup.org>.
Signed-off-by: Martin Storsjö <martin@martin.st>
Luca Barbato [Mon, 16 Sep 2013 16:09:12 +0000 (18:09 +0200)]
flv: Do not export datastream as metadata
It is used internally.
Luca Barbato [Mon, 16 Sep 2013 15:42:59 +0000 (17:42 +0200)]
rtmp: Store all the notify messages
The onTextData is used to implement text data streams in flv.
Luca Barbato [Mon, 16 Sep 2013 09:39:45 +0000 (11:39 +0200)]
rtmp: Do not send the first field twice within the handshake
Luca Barbato [Mon, 16 Sep 2013 09:37:48 +0000 (11:37 +0200)]
rtmp: Drop an unneeded warning
Apparently a widely used streaming server requires that the second
field always presents a version during C1 phase.
Luca Barbato [Sun, 15 Sep 2013 14:52:33 +0000 (16:52 +0200)]
rtmp: Support play method in listen mode
Luca Barbato [Sat, 14 Sep 2013 14:41:50 +0000 (16:41 +0200)]
rtmp: Factor out publish specific code
Will be reused for supporting play.
Luca Barbato [Sun, 15 Sep 2013 19:42:07 +0000 (21:42 +0200)]
mem: Introduce av_reallocp
Vittorio Giovara [Tue, 10 Sep 2013 10:31:46 +0000 (12:31 +0200)]
Fix references to deleted avcodec_encode_video() function
Martin Storsjö [Wed, 11 Sep 2013 20:09:37 +0000 (23:09 +0300)]
avpacket: Fix error checking in packet_alloc
Previously the wrong buffer pointer was checked, when buf
instead of *buf was checked. But checking the return value
instead is even better.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Thu, 12 Sep 2013 09:27:58 +0000 (12:27 +0300)]
vp3: Check the framerate for validity
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Thu, 12 Sep 2013 09:10:18 +0000 (12:10 +0300)]
proresdec: Properly make sure an index doesn't run past the limit
If idx equaled num_coeffs - 1 on entry to the loop, the previous
check failed to break out of the loop.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>