OSDN Git Service
Jeff King [Fri, 19 Oct 2007 02:05:10 +0000 (22:05 -0400)]
Documentation/git-gc: improve description of --auto
This patch tries to make the description of --auto a little
more clear for new users, especially those referred by the
"git-gc --auto" notification message.
It also cleans up some grammatical errors and typos in the
original description, as well as rewording for clarity.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jeff King [Fri, 19 Oct 2007 02:01:11 +0000 (22:01 -0400)]
Documentation/git-gc: explain --auto in description
Now that git-gc --auto tells the user to look at the man
page, it makes sense to mention the auto behavior near the
top (since this is likely to be most users' first exposure
to git-gc).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jeff King [Fri, 19 Oct 2007 01:12:11 +0000 (21:12 -0400)]
git-gc: improve wording of --auto notification
The previous message had too much of a "boy, you should
really turn off this annoying gc" flair to it. Instead,
let's make sure the user understands what is happening, that
they can run it themselves, and where to find more info.
Suggested by Brian Gernhardt.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Thu, 18 Oct 2007 07:45:05 +0000 (03:45 -0400)]
Merge branch 'jc/am-quiet'
* jc/am-quiet:
git-am: fix typo in the previous one.
git-am: make the output quieter.
Shawn O. Pearce [Thu, 18 Oct 2007 07:11:17 +0000 (03:11 -0400)]
Merge branch 'maint'
* maint:
Yet more 1.5.3.5 fixes mentioned in release notes
cvsserver: Use exit 1 instead of die when req_Root fails.
git-blame shouldn't crash if run in an unmerged tree
git-config: print error message if the config file cannot be read
fixing output of non-fast-forward output of post-receive-email
Shawn O. Pearce [Thu, 18 Oct 2007 07:11:03 +0000 (03:11 -0400)]
Yet more 1.5.3.5 fixes mentioned in release notes
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Brian Gernhardt [Wed, 17 Oct 2007 14:05:47 +0000 (10:05 -0400)]
cvsserver: Use exit 1 instead of die when req_Root fails.
This was causing test failures because die was exiting 255.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Linus Torvalds [Thu, 18 Oct 2007 06:31:30 +0000 (02:31 -0400)]
git-blame shouldn't crash if run in an unmerged tree
If we are in the middle of resolving a merge conflict there may be
one or more files whose entries in the index represent an unmerged
state (index entries in the higher-order stages).
Attempting to run git-blame on any file in such a working directory
resulted in "fatal: internal error: ce_mode is 0" as we use the magic
marker for an unmerged entry is 0 (set up by things like diff-lib.c's
do_diff_cache() and builtin-read-tree.c's read_tree_unmerged())
and the ce_match_stat_basic() function gets upset about this.
I'm not entirely sure that the whole "ce_mode = 0" case is a good
idea to begin with, and maybe the right thing to do is to remove
that horrid freakish special case, but removing the internal error
seems to be the simplest fix for now.
Linus
[sp: Thanks to Björn Steinbrink for the test case]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Marius Storm-Olsen [Wed, 17 Oct 2007 10:57:47 +0000 (12:57 +0200)]
Teach core.autocrlf to 'git blame'
Pass the fake commit through convert_to_git, so that the
file is adjusted for local line-ending convention.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Gerrit Pape [Fri, 12 Oct 2007 11:40:57 +0000 (11:40 +0000)]
git-config: print error message if the config file cannot be read
Instead of simply exiting with 255, print an error message including
the reason why a config file specified through --file cannot be opened
or read.
The problem was noticed by Joey Hess, reported through
http://bugs.debian.org/445208
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Thu, 18 Oct 2007 05:30:19 +0000 (01:30 -0400)]
Merge branch 'lt/diff-rename'
* lt/diff-rename:
optimize diffcore-delta by sorting hash entries.
koreth@midwinter.com [Thu, 18 Oct 2007 04:41:43 +0000 (21:41 -0700)]
Add a message explaining that automatic GC is about to start
Signed-off-by: Steven Grimm <koreth@midwinter.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Robert Schiele [Wed, 17 Oct 2007 22:27:51 +0000 (00:27 +0200)]
fixing output of non-fast-forward output of post-receive-email
post-receive-email has one place where the variable fast_forward is not
spelled correctly. At the same place the logic was reversed. The
combination of both bugs made the script work correctly for fast-forward
commits but not for non-fast-forward ones. This change fixes this to
be correct in both cases.
Signed-off-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Benoit Sigoure [Tue, 16 Oct 2007 14:36:52 +0000 (16:36 +0200)]
git-svn: simplify the handling of fatal errors
* git-svn.perl (&fatal): Append the newline at the end of the error
message.
Adjust all callers.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Benoit Sigoure [Tue, 16 Oct 2007 14:36:51 +0000 (16:36 +0200)]
git-svn: add git svn proplist
This allows one to easily retrieve a list of svn properties from within
git-svn without requiring svn or knowing the URL of a repository.
* git-svn.perl (%cmd): Add the command `proplist'.
(&cmd_proplist): New.
* t/t9101-git-svn-props.sh: Test git svn proplist.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Benoit Sigoure [Tue, 16 Oct 2007 14:36:50 +0000 (16:36 +0200)]
git-svn: add git svn propget
This allows one to easily retrieve a single SVN property from within
git-svn without requiring svn or remembering the URL of a repository
* git-svn.perl (%cmd): Add the new command `propget'.
($cmd_dir_prefix): New global.
(&get_svnprops): New helper.
(&cmd_propget): New. Use &get_svnprops.
* t/t9101-git-svn-props.sh: Add a test case for propget.
[ew: make sure the rev-parse --show-prefix call doesn't break
the `git-svn clone' command]
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Benoit Sigoure [Tue, 16 Oct 2007 14:36:49 +0000 (16:36 +0200)]
git-svn: implement git svn create-ignore
git svn create-ignore (to create one .gitignore per directory
from the svn:ignore properties. This has the disadvantage of
committing the .gitignore during the next dcommit, but when you
import a repo with tons of ignores (>1000), using git svn show-ignore
to build .git/info/exclude is *not* a good idea, because things like
git-status will end up doing >1000 fnmatch *per file* in the repo,
which leads to git-status taking more than 4s on my Core2Duo 2Ghz 2G
RAM)
* git-svn.perl (%cmd): Add the new command `create-ignore'.
(&cmd_create_ignore): New.
* t/t9101-git-svn-props.sh: Adjust the test-case for show-ignore and
add a test case for create-ignore.
[ew: added commit message from
<
05CAB148-56ED-4FF1-8AAB-
4BA2A0B70C2C@lrde.epita.fr> ]
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Benoit Sigoure [Tue, 16 Oct 2007 14:36:48 +0000 (16:36 +0200)]
git-svn: add a generic tree traversal to fetch SVN properties
* git-svn.perl (&traverse_ignore): Remove.
(&prop_walk): New.
(&cmd_show_ignore): Use prop_walk.
[ew: This will ease the implementation of the `create-ignore',
`propget', and `proplist' commands]
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Luke Lu [Wed, 17 Oct 2007 03:45:25 +0000 (20:45 -0700)]
gitweb: speed up project listing on large work trees by limiting find depth
Signed-off-by: Luke Lu <git@vicaya.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Wed, 17 Oct 2007 03:32:03 +0000 (23:32 -0400)]
Merge branch 'maint'
* maint:
Document additional 1.5.3.5 fixes in release notes
Avoid 'expr index' on Mac OS X as it isn't supported
filter-branch: update current branch when rewritten
fix filter-branch documentation
helpful error message when send-pack finds no refs in common.
Fix setup_git_directory_gently() with relative GIT_DIR & GIT_WORK_TREE
Correct typos in release notes for 1.5.3.5
Shawn O. Pearce [Wed, 17 Oct 2007 03:31:58 +0000 (23:31 -0400)]
Document additional 1.5.3.5 fixes in release notes
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Michael Witten [Tue, 16 Oct 2007 08:08:14 +0000 (04:08 -0400)]
git-cvsexportcommit.perl: git-apply no longer needs --binary
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Wed, 17 Oct 2007 01:33:11 +0000 (21:33 -0400)]
Avoid 'expr index' on Mac OS X as it isn't supported
This fixes git-instaweb so it can start an httpd without warning
about an invalid test command. Yes its ugly, but its also quite
portable.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Schindelin [Wed, 17 Oct 2007 02:23:10 +0000 (03:23 +0100)]
filter-branch: update current branch when rewritten
Earlier, "git filter-branch --<options> HEAD" would not update the
working tree after rewriting the branch. This commit fixes it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Schindelin [Wed, 17 Oct 2007 02:22:25 +0000 (03:22 +0100)]
fix filter-branch documentation
The man page for filter-branch still talked about writing the result
to the branch "newbranch". This is hopefully the last place where the
old behaviour was described.
Noticed by Bill Lear.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Andrew Clausen [Tue, 16 Oct 2007 21:16:05 +0000 (17:16 -0400)]
helpful error message when send-pack finds no refs in common.
Signed-off-by: Andrew Clausen <clausen@econ.upenn.edu>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Eygene Ryabinkin [Mon, 15 Oct 2007 07:19:12 +0000 (11:19 +0400)]
git-svn: use "no warnings 'once'" to disable false-positives
Some variables coming from the Subversion's Perl bindings are used
in our code only once, so the interpreter warns us about it. These
warnings are false-positives, because the variables themselves are
initialized in the binding's guts, that are made by SWIG.
Credits to Sam Vilain for his note about "no warnings 'once'".
[ew: minor formatting change]
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Schindelin [Tue, 16 Oct 2007 23:37:36 +0000 (00:37 +0100)]
Fix setup_git_directory_gently() with relative GIT_DIR & GIT_WORK_TREE
There are a few programs, such as config and diff, which allow running
without a git repository. Therefore, they have to call
setup_git_directory_gently().
However, when GIT_DIR and GIT_WORK_TREE were set, and the current
directory was a subdirectory of the work tree,
setup_git_directory_gently() would return a bogus NULL prefix.
This patch fixes that.
Noticed by REPLeffect on IRC.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Wed, 17 Oct 2007 00:09:21 +0000 (20:09 -0400)]
Correct typos in release notes for 1.5.3.5
Noticed by Michele Ballabio.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Schindelin [Mon, 15 Oct 2007 22:32:45 +0000 (23:32 +0100)]
cvsexportcommit: get rid of temporary directory
Since commit
e86ad71fe5f53ae4434566bd09ea4256090e5a3a we do not use
a temporary directory in cvsexportcommit. So there is no need to set
one up.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jeff King [Mon, 15 Oct 2007 04:47:30 +0000 (00:47 -0400)]
git-rebase: document suppression of duplicate commits
git-rebase uses format-patch's --ignore-if-in-upstream
option, but we never document the user-visible behavior. The
example is placed near the top of the example list rather
than at the bottom because it is:
a. a simple example
b. a reasonably common scenario for many projects (mail
some patches which get accepted upstream, then rebase)
[sp: Corrected direction of 'HEAD..<upstream>' set comparsion]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Michael Olson [Mon, 15 Oct 2007 17:51:30 +0000 (13:51 -0400)]
Documentation/git-tag.txt: Document how to backdate tags
Added a new section beneath "On Automatic following" called "On
Backdating Tags". This includes an explanation of when to use this
method, a brief explanation of the kind of date that can be used in
GIT_AUTHOR_DATE, and an example invocation of git-tag using a custom
setting of GIT_AUTHOR_DATE.
[sp: Corrected s/you/your/, noticed by Jeff King]
Signed-off-by: Michael W. Olson <mwolson@gnu.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Michael W. Olson [Mon, 15 Oct 2007 17:48:27 +0000 (13:48 -0400)]
git-rebase--interactive.sh: Quote arguments to test
If /bin/sh is /bin/dash, then the script will display an error if
$parent_sha1 is undefined. This patch works fixes the issue by
quoting both arguments to `test'. Arguments composed solely of
variable expansions should always be quoted, unless we know for
certain that the contents are defined.
Signed-off-by: Michael W. Olson <mwolson@gnu.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Tue, 16 Oct 2007 02:31:47 +0000 (22:31 -0400)]
Merge branch 'maint'
* maint:
Whip post 1.5.3.4 maintenance series into shape.
rebase -i: use diff plumbing instead of porcelain
Do not remove distributed configure script
git-archive: document --exec
git-reflog: document --verbose
git-config: handle --file option with relative pathname properly
clear_commit_marks(): avoid deep recursion
git add -i: Remove unused variables
git add -i: Fix parsing of abbreviated hunk headers
git-config: don't silently ignore options after --list
Clean up "git log" format with DIFF_FORMAT_NO_OUTPUT
Fix embarrassing "git log --follow" bug
Conflicts:
RelNotes
git-rebase--interactive.sh
Shawn O. Pearce [Tue, 16 Oct 2007 02:29:50 +0000 (22:29 -0400)]
Whip post 1.5.3.4 maintenance series into shape.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Josh England [Tue, 9 Oct 2007 16:04:42 +0000 (10:04 -0600)]
Minor usage update in setgitperms.perl
Signed-off-by: Josh England <jjengla@sandia.gov>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Ralf Wildenhues [Tue, 9 Oct 2007 21:03:55 +0000 (23:03 +0200)]
manual: use 'URL' instead of 'url'.
Just for consistency, use the spelling URL everywhere.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Ralf Wildenhues [Tue, 9 Oct 2007 21:03:11 +0000 (23:03 +0200)]
manual: add some markup.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Ralf Wildenhues [Tue, 9 Oct 2007 21:02:19 +0000 (23:02 +0200)]
manual: Fix example finding commits referencing given content.
If I'm handed a file, then it typically lives outside the
working directory. git-log only operates on in-tree files,
so the first 'filename' should be an in-tree one, or it should
look at all files. This patch does the latter, so it would
also find renamed files. However, it is also slower.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Ralf Wildenhues [Tue, 9 Oct 2007 21:01:05 +0000 (23:01 +0200)]
Fix wording in push definition.
Make the definition of push in the glossary readable.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Ralf Wildenhues [Tue, 9 Oct 2007 21:00:03 +0000 (23:00 +0200)]
Fix some typos, punctuation, missing words, minor markup.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Ralf Wildenhues [Tue, 9 Oct 2007 21:05:30 +0000 (23:05 +0200)]
manual: Fix or remove em dashes.
em dashes were used inconsistently in the manual.
This changes them to the way they are used in US English.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Brian Ewins [Thu, 11 Oct 2007 19:32:27 +0000 (20:32 +0100)]
Add a --dry-run option to git-push.
The default behaviour of git-push is potentially confusing
for new users, since it will push changes that are not on
the current branch. Publishing patches that were still
cooking on a development branch is hard to undo.
It would also be nice to be able to verify the expansion
of refspecs if you've edited them, so that you know
what branches matched on the server.
Adding a --dry-run flag allows the user to experiment
safely and learn how to use git-push properly. Originally
suggested by Steffen Prohaska.
Signed-off-by: Brian Ewins <brian.ewins@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Brian Ewins [Thu, 11 Oct 2007 19:32:26 +0000 (20:32 +0100)]
Add a --dry-run option to git-send-pack.
Implement support for --dry-run, so that it can be used
in calls from git-push. With this flag set, git-send-pack
will not send any updates to the server.
Signed-off-by: Brian Ewins <brian.ewins@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Pierre Habouzit [Fri, 5 Oct 2007 08:11:59 +0000 (10:11 +0200)]
Fix in-place editing functions in convert.c
* crlf_to_git and ident_to_git:
Don't grow the buffer if there is enough space in the first place.
As a side effect, when the editing is done "in place", we don't grow, so
the buffer pointer doesn't changes, and `src' isn't invalidated anymore.
Thanks to Bernt Hansen for the bug report.
* apply_filter:
Fix memory leak due to fake in-place editing that didn't collected the
old buffer when the filter succeeds. Also a cosmetic fix.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Mike Dalessio [Sat, 6 Oct 2007 17:29:49 +0000 (13:29 -0400)]
instaweb: support for Ruby's WEBrick server
running the webrick server with git requires Ruby and Ruby's YAML and
Webrick libraries (both of which come standard with Ruby). nice for
single-user standalone invocations.
the --httpd=webrick option generates a ruby script on the fly to read
httpd.conf options and invoke the web server via library call. this
script is placed in the .git/gitweb directory. it also generates a
shell script in a feeble attempt to invoke ruby in a portable manner,
which assumes that 'ruby' is in the user's $PATH.
Signed-off-by: Mike Dalessio <mike@csa.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Mike Dalessio [Sat, 6 Oct 2007 17:29:48 +0000 (13:29 -0400)]
instaweb: allow for use of auto-generated scripts
this patch allows scripts that reside in $fqgitdir/gitweb to be used
for firing up an instaweb server. this lays the groundwork for
extending instaweb support to non-standard web servers, which may
require a script for proper invocation.
Signed-off-by: Mike Dalessio <mike@csa.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Marius Storm-Olsen [Tue, 9 Oct 2007 14:16:09 +0000 (16:16 +0200)]
Add 'git-p4 commit' as an alias for 'git-p4 submit'
Given that git uses 'commit', git-p4's 'sumbit' was a bit confusing at times;
often making me do 'git submit' and 'git-p4 commit' instead.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Acked-By: Simon Hausmann <simon@lst.de>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Michael Gebetsroither [Sat, 6 Oct 2007 21:16:51 +0000 (23:16 +0200)]
hg-to-git speedup through selectable repack intervals
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Eygene Ryabinkin [Sat, 6 Oct 2007 18:57:19 +0000 (22:57 +0400)]
git-svn: respect Subversion's [auth] section configuration values
Parameters 'store-passwords' and 'store-auth-creds' from Subversion's
configuration (~/.subversion/config) were not respected. This was
fixed: the default values for these parameters are set to 'yes' to
follow Subversion behaviour.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Frederick Akalin [Fri, 5 Oct 2007 07:20:49 +0000 (00:20 -0700)]
gtksourceview2 support for gitview
Added support for gtksourceview2 module (pygtksourceview 1.90.x) in
gitview. Also refactored code that creates the source buffer and view.
Signed-off-by: Frederick Akalin <akalin@akalin.cx>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jeff Muizelaar [Thu, 11 Oct 2007 21:49:21 +0000 (17:49 -0400)]
fix contrib/hooks/post-receive-email hooks.recipients error message
Have the error message for missing recipients actually report the
missing config variable and not a fictional one.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Schindelin [Tue, 9 Oct 2007 14:33:25 +0000 (15:33 +0100)]
Support cvs via git-shell
This adds cvs support to the git-shell; You can now give new users
a restricted git-shell and they still can commit via git's cvs
emulator.
Note that either the gecos information must be accurate, or you must
provide a $HOME/.gitconfig with the appropriate user credentials.
Since the git-shell is too restricted to allow the user to do it
(on purpose!), it is up to the administrator to take care of that.
Based on an idea by Jan Wielemaker.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Schindelin [Tue, 9 Oct 2007 12:59:43 +0000 (13:59 +0100)]
rebase -i: use diff plumbing instead of porcelain
When diff drivers are installed, calling "git diff <tree1>..<tree2>"
calls those drivers. This borks the patch generation of rebase -i.
So use "git diff-tree -p" instead, which does not call diff drivers.
Noticed by Johannes Sixt.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Mathias Megyei [Thu, 4 Oct 2007 21:49:19 +0000 (23:49 +0200)]
Do not remove distributed configure script
Before this patch the clean target has removed the
configure script that comes with Git tar file.
That made compiling Git for different architectures
inconvenient.
This patch excludes configure from the files to be
deleted by 'make clean' and adds new target 'distclean'
to preserve old functionality.
Signed-off-by: Mathias Megyei <mathias@mnet-mail.de>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Michele Ballabio [Thu, 4 Oct 2007 22:41:11 +0000 (00:41 +0200)]
git-archive: document --exec
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Michele Ballabio [Thu, 4 Oct 2007 12:26:54 +0000 (14:26 +0200)]
git-reflog: document --verbose
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Kristof Provost [Sat, 6 Oct 2007 14:24:42 +0000 (16:24 +0200)]
makefile: Add a cscope target
The current makefile supports ctags but not cscope. Some people prefer
cscope (I do), so this patch adds a cscope target.
I've also added cscope* to the .gitignore file. For some reason tags
and TAGS weren't in there either so I've added them too.
Signed-off-by: Kristof Provost <Kristof@provost-engineering.be>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Gerrit Pape [Fri, 12 Oct 2007 11:32:51 +0000 (11:32 +0000)]
git-config: handle --file option with relative pathname properly
When calling git-config not from the top level directory of a repository,
it changes directory before trying to open the config file specified
through the --file option, which then fails if the config file was
specified by a relative pathname. This patch adjusts the pathname to
the config file if applicable.
The problem was noticed by Joey Hess, reported through
http://bugs.debian.org/445208
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Schindelin [Wed, 10 Oct 2007 22:14:35 +0000 (23:14 +0100)]
clear_commit_marks(): avoid deep recursion
Before this patch, clear_commit_marks() recursed for each parent. This
could be potentially very expensive in terms of stack space. Probably
the only reason that this did not lead to problems is the fact that we
typically call clear_commit_marks() after marking a relatively small set
of commits.
Use (sort of) a tail recursion instead: first recurse on the parents
other than the first one, and then continue the loop with the first
parent.
Noticed by Shawn Pearce.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jean-Luc Herren [Tue, 9 Oct 2007 19:34:17 +0000 (21:34 +0200)]
git add -i: Remove unused variables
Signed-off-by: Jean-Luc Herren <jlh@gmx.ch>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jean-Luc Herren [Tue, 9 Oct 2007 19:29:26 +0000 (21:29 +0200)]
git add -i: Fix parsing of abbreviated hunk headers
The unified diff format allows one-line ranges to be abbreviated
by omiting the size. The hunk header "@@ -10,1 +10,1 @@" can be
expressed as "@@ -10 +10 @@", but this wasn't properly parsed in
all cases.
Such abbreviated hunk headers are generated when a one-line change
(add, remove or modify) appears without context; for example
because the file is a one-liner itself or because GIT_DIFF_OPTS
was set to '-u0'. If the user then runs 'git add -i' and enters
the 'patch' command for that file, perl complains about undefined
variables.
Signed-off-by: Jean-Luc Herren <jlh@gmx.ch>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Frank Lichtenheld [Fri, 5 Oct 2007 20:16:44 +0000 (22:16 +0200)]
git-config: don't silently ignore options after --list
Error out if someone gives options after --list since that is
not a valid syntax.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Brandon Casey [Thu, 11 Oct 2007 01:00:27 +0000 (20:00 -0500)]
git-gc --auto: simplify "repack" command line building
Since "-a" is removed from the base repack command line,
we can simplify how we add additional options to this
command line when using --auto.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Brandon Casey [Thu, 11 Oct 2007 00:59:19 +0000 (19:59 -0500)]
git-gc: by default use safer "-A" option to repack when not --prune'ing
This makes use of repack's new "-A" option which does not drop packed
unreachable objects. This makes git-gc safe to call at any time,
particularly when a repository is referenced as an alternate by
another repository.
git-gc --prune will use the "-a" option to repack instead of "-A", so
that packed unreachable objects will be removed.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Alex Riesen [Thu, 4 Oct 2007 13:32:53 +0000 (15:32 +0200)]
fix t5403-post-checkout-hook.sh: built-in test in dash does not have "=="
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Linus Torvalds [Tue, 9 Oct 2007 16:35:22 +0000 (09:35 -0700)]
Clean up "git log" format with DIFF_FORMAT_NO_OUTPUT
This fixes an unnecessary empty line that we add to the log message when
we generate diffs, but don't actually end up printing any due to having
DIFF_FORMAT_NO_OUTPUT set.
This can happen with pickaxe or with rename following. The reason is that
we normally add an empty line between the commit and the diff, but we do
that even for the case where we've then suppressed the actual printing of
the diff.
This also updates a couple of tests that assumed the extraneous empty
line would exist at the end of output.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Linus Torvalds [Mon, 8 Oct 2007 20:42:41 +0000 (13:42 -0700)]
Fix embarrassing "git log --follow" bug
It turns out that I completely broke "git log --follow" with my recent
patch to revision.c ("Fix revision log diff setup, avoid unnecessary diff
generation", commit
b7bb760d5ed4881422673d32f869d140221d3564).
Why? Because --follow obviously requires the diff machinery to function,
exactly the same way pickaxe does.
So everybody is away right now, but considering that nobody even noticed
this bug, I don't think it matters. But for the record, here's the trivial
one-liner fix (well, two, since I also fixed the comment).
Because of the nature of the bug, if you ask for patches when following
(which is one of the things I normally do), the bug is hidden, because
then the request for diff output will automatically also enable the diffs
themselves.
So while "git log --follow <filename>" didn't work, adding a "-p"
magically made it work again even without this fix.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Junio C Hamano [Thu, 4 Oct 2007 08:35:01 +0000 (01:35 -0700)]
Update state documentation link for 1.5.3.4
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Wed, 3 Oct 2007 02:28:19 +0000 (19:28 -0700)]
optimize diffcore-delta by sorting hash entries.
Here's a test-patch. I don't guarantee anything, except that when I did
the timings I also did a "wc" on the result, and they matched..
Before:
[torvalds@woody linux]$ time git diff -l0 --stat -C v2.6.22.. | wc
7104 28574 438020
real 0m10.526s
user 0m10.401s
sys 0m0.136s
After:
[torvalds@woody linux]$ time ~/git/git diff -l0 --stat -C v2.6.22.. | wc
7104 28574 438020
real 0m8.876s
user 0m8.761s
sys 0m0.128s
but the diff is fairly simple, so if somebody will go over it and say
whether it's likely to be *correct* too, that 15% may well be worth it.
[ Side note, without rename detection, that diff takes just under three
seconds for me, so in that sense the improvement to the rename detection
itself is larger than the overall 15% - it brings the cost of just
rename detection from 7.5s to 5.9s, which would be on the order of just
over a 20% performance improvement. ]
Hmm. The patch depends on half-way subtle issues like the fact that the
hashtables are guaranteed to not be full => we're guaranteed to have zero
counts at the end => we don't need to do any steenking iterator count in
the loop. A few comments might in order.
Linus
Steven Walter [Fri, 28 Sep 2007 17:24:19 +0000 (13:24 -0400)]
Don't checkout the full tree if avoidable
In most cases of branching, the tree is copied unmodified from the trunk
to the branch. When that is done, we can simply start with the parent's
index and apply the changes on the branch as usual.
[ew: rewritten from Steven's original to use SVN::Client instead
of the command-line svn client.
Since SVN::Client connects separately, we'll share our
authentication providers array between our usages of
SVN::Client and SVN::Ra, too. Bypassing the high-level
SVN::Client library can avoid this, but the code will be
much more complex. Regardless, any implementation of this
seems to require restarting a connection to the remote
server.
Also of note is that SVN 1.4 and later allows a more
efficient diff_summary to be done instead of a full diff,
but since this code is only to support SVN < 1.4.4, we'll
ignore it for now.]
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 4 Oct 2007 00:42:52 +0000 (17:42 -0700)]
builtin-apply: fix conversion error in strbuf series
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 3 Oct 2007 11:28:24 +0000 (04:28 -0700)]
Merge branch 'mv/unknown'
* mv/unknown:
Don't use "<unknown>" for placeholders and suppress printing of empty user formats.
Junio C Hamano [Wed, 3 Oct 2007 10:06:02 +0000 (03:06 -0700)]
Merge branch 'ph/strbuf'
* ph/strbuf: (44 commits)
Make read_patch_file work on a strbuf.
strbuf_read_file enhancement, and use it.
strbuf change: be sure ->buf is never ever NULL.
double free in builtin-update-index.c
Clean up stripspace a bit, use strbuf even more.
Add strbuf_read_file().
rerere: Fix use of an empty strbuf.buf
Small cache_tree_write refactor.
Make builtin-rerere use of strbuf nicer and more efficient.
Add strbuf_cmp.
strbuf_setlen(): do not barf on setting length of an empty buffer to 0
sq_quote_argv and add_to_string rework with strbuf's.
Full rework of quote_c_style and write_name_quoted.
Rework unquote_c_style to work on a strbuf.
strbuf API additions and enhancements.
nfv?asprintf are broken without va_copy, workaround them.
Fix the expansion pattern of the pseudo-static path buffer.
builtin-for-each-ref.c::copy_name() - do not overstep the buffer.
builtin-apply.c: fix a tiny leak introduced during xmemdupz() conversion.
Use xmemdupz() in many places.
...
Junio C Hamano [Wed, 3 Oct 2007 10:05:58 +0000 (03:05 -0700)]
Merge branch 'lh/merge'
* lh/merge:
git-merge: add --ff and --no-ff options
git-merge: add support for --commit and --no-squash
git-merge: add support for branch.<name>.mergeoptions
git-merge: refactor option parsing
git-merge: fix faulty SQUASH_MSG
Add test-script for git-merge porcelain
Junio C Hamano [Wed, 3 Oct 2007 10:05:39 +0000 (03:05 -0700)]
Merge branch 'js/rebase-i'
* js/rebase-i:
rebase -i: work on a detached HEAD
Junio C Hamano [Wed, 3 Oct 2007 10:05:32 +0000 (03:05 -0700)]
Merge branch 'jc/autogc'
* jc/autogc:
git-gc --auto: run "repack -A -d -l" as necessary.
git-gc --auto: restructure the way "repack" command line is built.
git-gc --auto: protect ourselves from accumulated cruft
git-gc --auto: add documentation.
git-gc --auto: move threshold check to need_to_gc() function.
repack -A -d: use --keep-unreachable when repacking
pack-objects --keep-unreachable
Export matches_pack_name() and fix its return value
Invoke "git gc --auto" from commit, merge, am and rebase.
Implement git gc --auto
Junio C Hamano [Wed, 3 Oct 2007 10:03:40 +0000 (03:03 -0700)]
Merge branch 'je/hooks'
* je/hooks:
post-checkout hook, tests, and docs
Junio C Hamano [Wed, 3 Oct 2007 10:03:22 +0000 (03:03 -0700)]
Merge branch 'ap/dateformat'
* ap/dateformat:
Add a test script for for-each-ref, including test of date formatting
dateformat: parse %(xxdate) %(yydate:format) correctly
Make for-each-ref's grab_date() support per-atom formatting
Make for-each-ref allow atom names like "<name>:<something>"
parse_date_format(): convert a format name to an enum date_mode
Junio C Hamano [Wed, 3 Oct 2007 10:03:15 +0000 (03:03 -0700)]
Sync with GIT 1.5.3.4
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 3 Oct 2007 09:33:11 +0000 (02:33 -0700)]
GIT 1.5.3.4
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andy Parkins [Tue, 2 Oct 2007 11:02:57 +0000 (12:02 +0100)]
Add a test script for for-each-ref, including test of date formatting
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carl Worth [Wed, 3 Oct 2007 07:03:53 +0000 (00:03 -0700)]
Add test case for ls-files --with-tree
This tests basic functionality and also exercises a bug noticed
by Keith Packard, (prune_cache followed by add_index_entry can
trigger an attempt to realloc a pointer into the middle of an
allocated buffer).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keith Packard [Wed, 3 Oct 2007 05:44:15 +0000 (22:44 -0700)]
Must not modify the_index.cache as it may be passed to realloc at some point.
The index cache is not static, growing as new entries are added. If
entries are added after prune_cache is called, cache will no longer
point at the base of the allocation, and realloc will not be happy.
I verified that this was the only place in the current source which
modified any index_state.cache elements aside from the alloc/realloc
calls in read-cache by changing the type of the element to 'struct
cache_entry ** const cache' and recompiling.
A more efficient patch would create a separate 'cache_base' value to
track the allocation and then fix things up when reallocation was
necessary, instead of the brute-force memmove used here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Robert Schiele [Wed, 3 Oct 2007 01:49:34 +0000 (03:49 +0200)]
the ar tool is called gar on some systems
Some systems that have only installed the GNU toolchain (prefixed with "g")
do not provide "ar" but only "gar". Make configure find this tool as well.
Signed-off-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 3 Oct 2007 04:01:03 +0000 (21:01 -0700)]
rename diff_free_filespec_data_large() to diff_free_filespec_blob()
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 25 Sep 2007 19:29:42 +0000 (15:29 -0400)]
diffcore-rename: cache file deltas
We find rename candidates by computing a fingerprint hash of
each file, and then comparing those fingerprints. There are
inherently O(n^2) comparisons, so it pays in CPU time to
hoist the (rather expensive) computation of the fingerprint
out of that loop (or to cache it once we have computed it once).
Previously, we didn't keep the filespec information around
because then we had the potential to consume a great deal of
memory. However, instead of keeping all of the filespec
data, we can instead just keep the fingerprint.
This patch implements and uses diff_free_filespec_data_large
to accomplish that goal. We also have to change
estimate_similarity not to needlessly repopulate the
filespec data when we already have the hash.
Practical tests showed 4.5x speedup for a 10% memory usage
increase.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johan Herland [Tue, 2 Oct 2007 23:42:29 +0000 (01:42 +0200)]
Mention 'cpio' dependency in INSTALL
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Federico Mena Quintero [Tue, 2 Oct 2007 23:36:30 +0000 (18:36 -0500)]
Make git-pull complain and give advice when there is nothing to merge with
Signed-off-by: Federico Mena Quintero <federico@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Federico Mena Quintero [Tue, 2 Oct 2007 23:34:32 +0000 (18:34 -0500)]
Note that git-branch will not automatically checkout the new branch
Signed-off-by: Federico Mena Quintero <federico@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Federico Mena Quintero [Tue, 2 Oct 2007 23:33:30 +0000 (18:33 -0500)]
Add documentation for --track and --no-track to the git-branch docs.
Signed-off-by: Federico Mena Quintero <federico@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Federico Mena Quintero [Tue, 2 Oct 2007 23:32:32 +0000 (18:32 -0500)]
Say when --track is useful in the git-checkout docs.
The documentation used to say what the option does, but it
didn't mention a use case.
Signed-off-by: Federico Mena Quintero <federico@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Tue, 2 Oct 2007 20:14:30 +0000 (21:14 +0100)]
Fix typo in config.txt
There was an 'l' (ell) instead of a '1' (one) in one of the gitlinks.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 2 Oct 2007 22:09:41 +0000 (15:09 -0700)]
for-each-ref: fix %(numparent) and %(parent)
The string value of %(numparent) was not returned correctly.
Also %(parent) misbehaved for the root commits (returned garbage)
and merge commits (returned first parent, followed by a space).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 2 Oct 2007 21:31:37 +0000 (14:31 -0700)]
dateformat: parse %(xxdate) %(yydate:format) correctly
Andy Parkins noticed that parsing of the above would not
correctly notice that xxdate does not have any format
specifier.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 2 Oct 2007 18:47:58 +0000 (11:47 -0700)]
git-commit: initialize TMP_INDEX just to be sure.
We rely on TMP_INDEX variable to decide if we are doing a partial commit,
as it is only set in the partial commit codepath. But the variable is
never initialized. A stray environment variable from outside could
ruin the day.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Steffen Prohaska [Tue, 2 Oct 2007 06:14:37 +0000 (08:14 +0200)]
fixed link in documentation of diff-options
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 1 Oct 2007 09:09:09 +0000 (02:09 -0700)]
Merge branch 'maint'
* maint:
Whip post 1.5.3.3 maintenance series into shape.
git stash: document apply's --index switch
post-receive-hook: Remove the From field from the generated email header so that the pusher's name is used
Junio C Hamano [Mon, 1 Oct 2007 09:07:47 +0000 (02:07 -0700)]
Whip post 1.5.3.3 maintenance series into shape.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Miklos Vajna [Sun, 30 Sep 2007 22:30:27 +0000 (00:30 +0200)]
git stash: document apply's --index switch
Signed-off-by: Junio C Hamano <gitster@pobox.com>