OSDN Git Service
Dave Airlie [Thu, 4 Jul 2013 05:02:33 +0000 (15:02 +1000)]
qxl: add suspend/resume/hibernate support.
This adds suspend/resume and hibernate support for the KMS driver. it evicts
all the objects, turns off the outputs, and waits for the hw to go idle,
On resume, it resets the memslots, rings, monitors object and forces modeset.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 4 Jul 2013 04:59:34 +0000 (14:59 +1000)]
qxl: add fb and ttm entry points for use by suspend/resume.
This just ports some APIs like radeon uses to provide hooks for s/r to
call.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 4 Jul 2013 04:58:45 +0000 (14:58 +1000)]
qxl: add ring prep code for s/r
This prepare the ring code for s/r additions, the release ring will need
reinitialising.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 4 Jul 2013 04:57:58 +0000 (14:57 +1000)]
qxl: prepare memslot code for suspend/resume
this splits out initing the hw memslots from the guest info, and
creates an entrypoint for s/r to use.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 4 Jul 2013 04:46:46 +0000 (14:46 +1000)]
qxl: split monitors_config object creation out.
This splits the creation of the monitors config object out so we can
re-use it across suspend/resume later.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 2 Jul 2013 09:44:50 +0000 (10:44 +0100)]
drm/qxl: set time on drawables from userspace
This just sets the qxl time on the drawables.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 2 Jul 2013 05:37:13 +0000 (06:37 +0100)]
drm/qxl: add support for > 1 output
This adds support for a default of 4 heads, with a command line
parameter to change the default number.
It also overhauls the modesetting code to handle this case properly,
and send the correct things to the hardware at the right time.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 1 Jul 2013 04:14:38 +0000 (14:14 +1000)]
drm/qxl: make dynamic resizing work properly.
qxl has a feature to allow the userspace driver do arbitrary resizes
when the viewer resizes, this fixes it by removing unnecessary code
from the kernel side.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Mon, 1 Jul 2013 20:05:53 +0000 (22:05 +0200)]
drm/mm: kill color_search_free/get_block
drm/i915 is the only user of the color allocation handling and
switched to insert_node a while ago. So we can ditch this.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Seung-Woo Kim [Mon, 1 Jul 2013 10:44:14 +0000 (19:44 +0900)]
drm: fix print format of sequence in trace point
seq of a trace point is unsigned int but print format was %d. So
it fixes the format as %u.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Seung-Woo Kim [Tue, 2 Jul 2013 00:53:28 +0000 (09:53 +0900)]
drm: fix error routines in drm_open_helper
There are missing parts to handle error in drm_open_helper().
The priv->minor, assigned by idr_find() which can return NULL,
should be checked whether it is NULL or not before referencing it.
put_pid(), drm_gem_release(), and drm_prime_destory_file_private()
should be called when error happens after their pair functions are
called. If an error occurs after executing dev->driver->open()
which allocates driver specific per-file private data, then the
private data should be released.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Seung-Woo Kim [Tue, 2 Jul 2013 08:57:04 +0000 (17:57 +0900)]
drm: add assertion for checking null edid to drm_edid_block_valid
If raw_edid of drm_edid_block_vaild() is null, it will crash, so
checking in bad label is removed and instead assertion is added at
the top of the function.
The type of return for the function is bool, so it fixes to return
true and false instead of 1 and 0.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Shuah Khan [Mon, 1 Jul 2013 22:06:02 +0000 (16:06 -0600)]
drm: Convert drm class driver from legacy pm ops to dev_pm_ops
Convert drivers/gpu/drm class to use dev_pm_ops for power management and
remove Legacy PM ops hooks. With this change, drm class registers
suspend/resume callbacks via class->pm (dev_pm_ops) instead of Legacy
class->suspend/resume. When __device_suspend() runs call-backs, it will
find class->pm ops for the drm class.
drm_class_suspend() hook calls driver legacy ops with the state information.
e.g: drm_class_suspend() calls into driver suspend routines
via drm_dev->driver->suspend(drm_dev, state).
Once drm_class_suspend() is converted to dev_pm_ops, it will no longer
have access to pm_transition which it has to pass into driver legacy
suspend calls. A new freeze and suspend hooks are added to address the not
having access to the state information. The new freeze and suspend hooks
simply call __drm_class_suspend() with the appropriate pm state information.
__drm_class_suspend() is the original suspend hook with a new name.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 4 Jul 2013 00:46:17 +0000 (10:46 +1000)]
Merge tag 'drm-intel-fixes-2013-07-03' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
Pile of fixes for 3.11. A bit large in patch count, but that's simply due
to two fixes being split up into really small parts. Also I've included a
few more vlv patches than I'd have included for other platforms. But since
vlv is officially supported for the first time only in 3.11 that shouldn't
result in unbearable risks.
Highlights:
- ghost eDP fixes for hsw from Paulo
- fix PCH detection in virtualized enviroments (Rui Guo)
- duct-tape dma sg construction when swiotlb is in use (Konrad), dupe with
a patch in your drm-fixes branch
- fix sdvo hotplug on i965g
- tune down a bunch of dmesg ERRORs which can be hit under normal
conditions
- detect invalid pitches for tiled scanout buffers (Chris)
- a pile of vlv fixes from Ville: rps improvements, fixes for the dpll
LPF, fixup the sprite mmio offsets
- fix context size on hsw (Ben)
- locking fixes for the hotplug code, specifically the storm handling
- fix get_config on CPT (Xiong Zhang)
- Fix the domain tracking when an unlocked seqno wait was interrupt
(Chris), this seems to explain tons of little corruption bugs in the
ddx. Chris also added a nice igt to exercise this.
- work around stack-corrupting vnsprintf in our error state dumper
* tag 'drm-intel-fixes-2013-07-03' of git://people.freedesktop.org/~danvet/drm-intel: (39 commits)
drm/i915: Don't try to tear down the stolen drm_mm if it's not there
drm/i915: Break up the large vsnprintf() in print_error_buffers()
drm/i915: Refactor the wait_rendering completion into a common routine
drm/i915: Only clear write-domains after a successful wait-seqno
drm/i915: correct intel_dp_get_config() function for DevCPT
drm/i915: fix hpd interrupt register locking
drm/i915: fold the no-irq check into intel_hpd_irq_handler
drm/i915: fold the queue_work into intel_hpd_irq_handler
drm/i915: fold the hpd_irq_setup call into intel_hpd_irq_handler
drm/i915: s/hotplug_irq_storm_detect/intel_hpd_irq_handler/
drm/i915: close tiny race in the ilk pcu even interrupt setup
drm/i915: fix locking around ironlake_enable|disable_display_irq
drm/i915: Fix context sizes on HSW
drm/i915: Fix VLV sprite register offsets
Revert "drm/i915: Don't use the HDMI port color range bit on Valleyview"
drm/i915: s/LFP/LPF in DPIO PLL register names
drm/i915: Fix VLV PLL LPF coefficients for DAC
drm/i915: Jump to at least RPe on VLV when increasing the GPU frequency
drm/i915: Don't increase the GPU frequency from the delayed VLV rps timer
drm/i915: GEN6_RP_INTERRUPT_LIMITS doesn't seem to exist on VLV
...
Dave Airlie [Thu, 4 Jul 2013 00:44:06 +0000 (10:44 +1000)]
Merge branch 'drm-next-3.11' of git://people.freedesktop.org/~agd5f/linux into drm-next
A few more DPM fixes.
* 'drm-next-3.11' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/sumo: implement support for disable_gfx_power_gating_in_uvd flag
drm/radeon/tn: disable PG when changing UVD clocks
drm/radeon/sumo: disable PG when changing UVD clocks
drm/radeon/aruba: disable additional rlc features
drm/radeon: fix endian bug in radeon_atom_get_mclk_range_table()
drm/radeon/dpm: fix compilation with certain versions of gcc
drm/radeon/dpm: clarify debugfs warning
Daniel Vetter [Mon, 1 Jul 2013 20:01:04 +0000 (22:01 +0200)]
drm/mm: WARN for unclean mm takedown
The usual drm driver has tons of different drm_mm memory managers so the drm
error message in dmesg is pretty useless. WARN instead so that we have the full
backtrace.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Mon, 1 Jul 2013 20:01:02 +0000 (22:01 +0200)]
drm/mm: fix debug table BUG
In
commit
3a359f0b21ab218c1bf7a6a1b638b6fd143d0b99
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sat Apr 20 12:08:11 2013 +0200
drm/mm: fix dump table BUG
I've failed to fix both instances of the regression introduced in
commit
9e8944ab564f2e3dde90a518cd32048c58918608
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Nov 15 11:32:17 2012 +0000
drm: Introduce an iterator over holes in the drm_mm range manager
Patch this up in the same way by extracting the hole debug logic
into it's own function, since that'll also clarify the logic a bit.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Tue, 2 Jul 2013 07:18:39 +0000 (09:18 +0200)]
drm/prime: fix up handle_to_fd ioctl return value
In
commit
da34242e5e0638312130f5bd5d2d277afbc6f806
Author: YoungJun Cho <yj44.cho@samsung.com>
Date: Wed Jun 26 10:21:42 2013 +0900
drm/prime: add return check for dma_buf_fd
the failure case handling was fixed up. But in the case when we
already had the buffer exported it changed the return value:
Previously we've return 0 on success, now we return the fd.
This ABI change has been caught by i-g-t/prime_self_import/with_one_bo.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66436
Cc: YoungJun Cho <yj44.cho@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: lu hua <huax.lu@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 3 Jul 2013 19:14:25 +0000 (15:14 -0400)]
drm/radeon/sumo: implement support for disable_gfx_power_gating_in_uvd flag
Some asic revisions need to disable PG when UVD is active.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 3 Jul 2013 19:01:45 +0000 (15:01 -0400)]
drm/radeon/tn: disable PG when changing UVD clocks
Causes hangs for some people.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 3 Jul 2013 19:07:28 +0000 (15:07 -0400)]
drm/radeon/sumo: disable PG when changing UVD clocks
Causes hangs for some people.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 3 Jul 2013 16:02:10 +0000 (12:02 -0400)]
drm/radeon/aruba: disable additional rlc features
They cause problems with dynamic clocking.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 3 Jul 2013 15:18:08 +0000 (11:18 -0400)]
drm/radeon: fix endian bug in radeon_atom_get_mclk_range_table()
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mike Lothian [Tue, 2 Jul 2013 21:38:11 +0000 (17:38 -0400)]
drm/radeon/dpm: fix compilation with certain versions of gcc
Add #include <linux/seq_file.h> to *_dpm.c files
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 2 Jul 2013 13:11:39 +0000 (09:11 -0400)]
drm/radeon/dpm: clarify debugfs warning
For chips without debugfs dpm support say that it's not
implemented rather than not supported to avoid confusion
about DPM support in general.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Vetter [Tue, 2 Jul 2013 08:48:31 +0000 (10:48 +0200)]
drm/i915: Don't try to tear down the stolen drm_mm if it's not there
Every other place properly checks whether we've managed to set
up the stolen allocator at boot-up properly, with the exception
of the cleanup code. Which results in an ugly
*ERROR* Memory manager not clean. Delaying takedown
at module unload time since the drm_mm isn't initialized at all.
v2: While at it check whether the stolen drm_mm is initialized instead
of the more obscure stolen_base == 0 check.
v3: Fix up the logic. Also we need to keep the stolen_base check in
i915_gem_object_create_stolen_for_preallocated since that can be
called before stolen memory is fully set up. Spotted by Chris Wilson.
v4: Readd the conversion in i915_gem_object_create_stolen_for_preallocated,
the check is for the dev_priv->mm.gtt_space drm_mm, the stolen
allocatot must already be initialized when calling that function (if
we indeed have stolen memory).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65953
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: lu hua <huax.lu@intel.com> (v3)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
David Herrmann [Mon, 1 Jul 2013 18:32:58 +0000 (20:32 +0200)]
drm: make drm_mm_init() return void
There is no reason to return "int" as this function never fails.
Furthermore, several drivers (ast, sis) already depend on this.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 2 Jul 2013 03:31:26 +0000 (13:31 +1000)]
Merge branch 'drm-next-3.11' of git://people.freedesktop.org/~agd5f/linux into drm-next
A few more patches for 3.11:
- add debugfs interface to check current DPM state
- Fix a bug that caused problems with DPM on BTC+ asics.
* 'drm-next-3.11' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/dpm: add debugfs support for SI
drm/radeon/dpm: add debugfs support for cayman
drm/radeon/dpm: add debugfs support for TN
drm/radeon/dpm: add debugfs support for ON/LN
drm/radeon/dpm: add debugfs support for 7xx/evergreen/btc
drm/radeon/dpm: add debugfs support for rv6xx
drm/radeon/dpm: add infrastructure to support debugfs info
drm/radeon/dpm: re-enable state transitions for Cayman
drm/radeon/dpm: re-enable state transitions for BTC
drm/radeon: fix typo in radeon_atom_init_mc_reg_table()
drm/radeon/atom: fix endian bug in radeon_atom_init_mc_reg_table()
drm/radeon: remove sumo dpm/uvd bringup leftovers
Alex Deucher [Fri, 28 Jun 2013 22:02:19 +0000 (18:02 -0400)]
drm/radeon/dpm: add debugfs support for SI
This allows you to look at the current DPM state via
debugfs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 28 Jun 2013 21:49:02 +0000 (17:49 -0400)]
drm/radeon/dpm: add debugfs support for cayman
This allows you to look at the current DPM state via
debugfs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 28 Jun 2013 16:01:38 +0000 (12:01 -0400)]
drm/radeon/dpm: add debugfs support for TN
This allows you to look at the current DPM state via
debugfs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 28 Jun 2013 14:47:56 +0000 (10:47 -0400)]
drm/radeon/dpm: add debugfs support for ON/LN
This allows you to look at the current DPM state via
debugfs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 28 Jun 2013 14:06:26 +0000 (10:06 -0400)]
drm/radeon/dpm: add debugfs support for 7xx/evergreen/btc
This allows you to look at the current DPM state via
debugfs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 28 Jun 2013 18:20:53 +0000 (14:20 -0400)]
drm/radeon/dpm: add debugfs support for rv6xx
This allows you to look at the current DPM state via
debugfs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 28 Jun 2013 13:28:39 +0000 (09:28 -0400)]
drm/radeon/dpm: add infrastructure to support debugfs info
This lays the frameworks to report realtime power level
feedback.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 1 Jul 2013 20:07:18 +0000 (16:07 -0400)]
drm/radeon/dpm: re-enable state transitions for Cayman
Was disabled due to stability issues on certain boards
caused by the a bug in the parsing of the atom mc reg tables.
That's fixed now so re-enable.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 1 Jul 2013 20:04:02 +0000 (16:04 -0400)]
drm/radeon/dpm: re-enable state transitions for BTC
Was disabled due to stability issues on certain boards
caused by the a bug in the parsing of the atom mc reg tables.
That's fixed now so re-enable.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 1 Jul 2013 17:33:53 +0000 (13:33 -0400)]
drm/radeon: fix typo in radeon_atom_init_mc_reg_table()
Bad pointer math. Fixes hangs in state transitions with
BTC+ asics.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 1 Jul 2013 17:32:49 +0000 (13:32 -0400)]
drm/radeon/atom: fix endian bug in radeon_atom_init_mc_reg_table()
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 28 Jun 2013 16:55:48 +0000 (12:55 -0400)]
drm/radeon: remove sumo dpm/uvd bringup leftovers
Function doesn't do anything useful.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chris Wilson [Sat, 29 Jun 2013 22:26:50 +0000 (23:26 +0100)]
drm/i915: Break up the large vsnprintf() in print_error_buffers()
So it appears that I have encountered some bogosity when trying to call
i915_error_printf() with many arguments from print_error_buffers(). The
symptom is that the vsnprintf parser tries to interpret an integer arg
as a character string, the resulting OOPS indicating stack corruption.
Replacing the single call with its 13 format specifiers and arguments
with multiple calls to i915_error_printf() worked fine. This patch goes
one step further and introduced i915_error_puts() to pass the strings
simply.
It may not fix the root cause, but it does prevent my box from dying and
I think helps make print_error_buffers() more friendly.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66077
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Sat, 29 Jun 2013 21:05:26 +0000 (22:05 +0100)]
drm/i915: Refactor the wait_rendering completion into a common routine
Harmonise the completion logic between the non-blocking and normal
wait_rendering paths, and move that logic into a common function.
In the process, we note that the last_write_seqno is by definition the
earlier of the two read/write seqnos and so all successful waits will
have passed the last_write_seqno. Therefore we can unconditionally clear
the write seqno and its domains in the completion logic.
v2: Add the missing ring parameter, because sometimes it is good to have
things compile.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Fri, 28 Jun 2013 15:54:08 +0000 (16:54 +0100)]
drm/i915: Only clear write-domains after a successful wait-seqno
In the introduction of the non-blocking wait, I cut'n'pasted the wait
completion code from normal locked path. Unfortunately, this neglected
that the normal path returned early if the wait returned early. The
result is that read-only waits may return whilst the GPU is still
writing to the bo.
Fixes regression from
commit
3236f57a0162391f84b93f39fc1882c49a8998c7 [v3.7]
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Aug 24 09:35:09 2012 +0100
drm/i915: Use a non-blocking wait for set-to-domain ioctl
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66163
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Xiong Zhang [Fri, 28 Jun 2013 04:59:06 +0000 (12:59 +0800)]
drm/i915: correct intel_dp_get_config() function for DevCPT
On DevCPT, the control register for Transcoder DP Sync Polarity is
TRANS_DP_CTL, not DP_CTL.
Without this patch, Many call trace occur on CPT machine with DP monitor.
The call trace is like: *ERROR* mismatch in adjusted_mode.flags(expected X,found X)
v2: use intel-crtc to simple patch, suggested by Daniel.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
[danvet: Extend the encoder->get_config comment to specify that we now
also depend upon intel_encoder->base.crtc being correct. Also bikeshed
s/intel_crtc/crtc/.]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65287
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 27 Jun 2013 15:52:15 +0000 (17:52 +0200)]
drm/i915: fix hpd interrupt register locking
Our interrupt handler (in hardirq context) could race with the timer
(in softirq context), hence we need to hold the spinlock around the
call to ->hdp_irq_setup in intel_hpd_irq_handler, too.
But as an optimization (and more so to clarify things) we don't need
to do the irqsave/restore dance in the hardirq context.
Note also that on ilk+ the race isn't just against the hotplug
reenable timer, but also against the fifo underrun reporting. That one
also modifies the SDEIMR register (again protected by the same
dev_priv->irq_lock).
To lock things down again sprinkle a assert_spin_locked. But exclude
the functions touching SDEIMR for now, I want to extract them all into
a new helper function (like we do already for pipestate, display
interrupts and all the various gt interrupts).
v2: Add the missing 't' Egbert spotted in a comment.
v3: Actually fix the right misspelled comment (Paulo).
Cc: Egbert Eich <eich@suse.de>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 27 Jun 2013 15:52:14 +0000 (17:52 +0200)]
drm/i915: fold the no-irq check into intel_hpd_irq_handler
The usual pattern for our sub-function irq_handlers is that they check
for the no-irq case themselves. This results in more streamlined code
in the upper irq handlers.
v2: Rebase on top of the i965g/gm sdvo hpd fix.
Cc: Egbert Eich <eich@suse.de>
Reviewed-by: Egbert Eich <eich@suse.de>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 27 Jun 2013 15:52:13 +0000 (17:52 +0200)]
drm/i915: fold the queue_work into intel_hpd_irq_handler
Everywhere the same.
Note that this patch leaves unnecessary braces behind, but the next
patch will kill those all anyway (including the if itself) so I've
figured I can keep the diff a bit smaller.
v2: Rebase on top of the i965g/gm sdvo hpd fix.
Cc: Egbert Eich <eich@suse.de>
Reviewed-by: Egbert Eich <eich@suse.de>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 27 Jun 2013 15:52:12 +0000 (17:52 +0200)]
drm/i915: fold the hpd_irq_setup call into intel_hpd_irq_handler
We already have a vfunc for this (and other parts of the hpd storm
handling code already use it).
v2: Rebase on top of the i965g/gm sdvo hpd fix.
Cc: Egbert Eich <eich@suse.de>
Reviewed-by: Egbert Eich <eich@suse.de>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 27 Jun 2013 15:52:11 +0000 (17:52 +0200)]
drm/i915: s/hotplug_irq_storm_detect/intel_hpd_irq_handler/
The combination of Paulo's fifo underrun detection code and Egbert's
hpd storm handling code unfortunately made the hpd storm handling code
racy.
To avoid duplicating tricky interrupt locking code over all platforms
start with a bit of refactoring. This patch is the very first step
since in the end the irq storm handling code will handle all hotplug
logic (and so also encapsulate the locking nicely).
v2: Rebase on top of the i965g/gm sdvo hpd fix.
Cc: Egbert Eich <eich@suse.de>
Reviewed-by: Egbert Eich <eich@suse.de>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 27 Jun 2013 11:44:59 +0000 (13:44 +0200)]
drm/i915: close tiny race in the ilk pcu even interrupt setup
By the time we write DEIER in the postinstall hook the interrupt
handler could run any time. And it does modify DEIER to handle
interrupts.
Hence the DEIER read-modify-write cycle for enabling the PCU event
source is racy. Close this races the same way we handle vblank
interrupts: Unconditionally enable the interrupt in the IER register,
but conditionally mask it in IMR. The later poses no such race since
the interrupt handler does not touch DEIMR.
Also update the comment, the clearing has already happened
unconditionally above.
v2: Actually shove the updated comment into the right train^W commit,
as spotted by Paulo.
Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 27 Jun 2013 11:44:58 +0000 (13:44 +0200)]
drm/i915: fix locking around ironlake_enable|disable_display_irq
The haswell unclaimed register handling code forgot to take the
spinlock. Since this is in the context of the non-rentrant interupt
handler and we only have one interrupt handler it is sufficient to
just grab the spinlock - we do not need to exclude any other
interrupts from running on the same cpu.
To prevent such gaffles in the future sprinkle assert_spin_locked over
these functions. Unfornately this requires us to hold the spinlock in
the ironlake postinstall hook where it is not strictly required:
Currently that is run in single-threaded context and with userspace
exlcuded from running concurrent ioctls. Add a comment explaining
this.
v2: ivb_can_enable_err_int also needs to be protected by the spinlock.
To ensure this won't happen in the future again also sprinkle a
spinlock assert in there.
v3: Kill the 2nd call to ivb_can_enable_err_int I've accidentally left
behind, spotted by Paulo.
Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: Paulo Zanoni <przanoni@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Wed, 26 Jun 2013 04:53:40 +0000 (21:53 -0700)]
drm/i915: Fix context sizes on HSW
With updates to the spec, we can actually see the context layout, and
how many dwords are allocated. That table suggests we need 70720 bytes
per HW context. Rounded up, this is 18 pages. Looking at what lives
after the current 4 pages we use, I can't see too much important (mostly
it's d3d related), but there are a couple of things which look scary. I
am hopeful this can explain some of our odd HSW failures.
v2: Make the context only 17 pages. The power context space isn't used
ever, and execlists aren't used in our driver, making the actual total
66944 bytes.
v3: Add a comment to the code. (Jesse & Paulo)
Reported-by: "Azad, Vinit" <vinit.azad@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 25 Jun 2013 11:16:35 +0000 (14:16 +0300)]
drm/i915: Fix VLV sprite register offsets
We forgot to add VLV_DISPLAY_BASE to the VLV sprite registers, which
caused the sprites to not work at all.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 25 Jun 2013 11:16:34 +0000 (14:16 +0300)]
Revert "drm/i915: Don't use the HDMI port color range bit on Valleyview"
The PIPECONF color range bit doesn't appear to be effective, on HDMI
outputs at least. The color range bit in the port register works though,
so let's use it.
I have not yet verified whether the PIPECONF bit works on DP outputs.
This reverts commit
83a2af88f80ebf8104c9e083b786668b00f5b9ce.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 14 Jun 2013 11:02:53 +0000 (14:02 +0300)]
drm/i915: s/LFP/LPF in DPIO PLL register names
LPF is short for "low pass filter".
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 14 Jun 2013 11:02:52 +0000 (14:02 +0300)]
drm/i915: Fix VLV PLL LPF coefficients for DAC
The current PLL settings produce a rather unstable picture when
I hook up a VLV to my HP ZR24w display via a VGA cable.
According to VLV2A0_DP_eDP_HDMI_DPIO_driver_vbios_notes_9, we should
use the the same LPF coefficients for DAC as we do for HDMI and RBR DP.
And indeed that seems to cure the shivers.
v2: Add the name of the relevant document to the commit message
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 25 Jun 2013 18:38:11 +0000 (21:38 +0300)]
drm/i915: Jump to at least RPe on VLV when increasing the GPU frequency
If the current GPU frquency is below RPe, and we're asked to increase
it, just go directly to RPe. This should provide better performance
faster than letting the frequency trickle up in response to the up
threshold interrupts.
For now just do it for VLV, since that matches quite closely how VLV
used to operate when the rps delayed timer kept things at RPe always.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 25 Jun 2013 18:38:10 +0000 (21:38 +0300)]
drm/i915: Don't increase the GPU frequency from the delayed VLV rps timer
There's little point in increasing the GPU frequency from the delayed
rps work on VLV. Now when the GPU is idle, the GPU frequency actually
keeps dropping gradually until it hits the minimum, whereas previously
it just ping-ponged constantly between RPe and RPe-1.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 25 Jun 2013 16:21:06 +0000 (19:21 +0300)]
drm/i915: GEN6_RP_INTERRUPT_LIMITS doesn't seem to exist on VLV
I can't find GEN6_RP_INTERRUPT_LIMITS (0xA014) anywhere in VLV docs.
Reading it always returns zero from what I can tell, and eliminating
it doesn't seem to make any difference to the behaviour of the system.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 25 Jun 2013 16:21:05 +0000 (19:21 +0300)]
drm/i915: Make the rps new_delay comparison more readable
Eliminate the weird inverted logic from the rps new_delay comparison.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 25 Jun 2013 16:21:02 +0000 (19:21 +0300)]
drm/i915: Don't wait for Punit after each freq change on VLV
It seems that even though Punit reports the frequency change to have
been completed, it still reports the old frequency in the status
register for some time.
So rather than polling for Punit to complete the frequency change after
each request, poll before. This gets rid of the spurious "Punit overrode
GPU freq" messages.
This also lets us continue working while Punit is performing the actual
frequency change. As a result, openarena demo088-test1 timedemo average
fps is increased by ~5 fps, and the slowest frame duration is reduced
by ~25%.
The sysfs cur_freq file always reads the current frequency from Punit
anyway, so having rps.cur_delay be slightly off at times doesn't matter.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 25 Jun 2013 16:21:01 +0000 (19:21 +0300)]
drm/i915: Clean up VLV rps code a bit
Always print both the MHz value and raw register value for rps stuff.
Also kill a somewhat pointless local 'rpe' variable and just use
dev_priv->rps.rpe_delay.
While at it clean up the caps in "GPU" and "Punit" debug messages.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 25 Jun 2013 16:26:45 +0000 (17:26 +0100)]
drm/i915: Detect invalid scanout pitches
Report back the user error of attempting to setup a CRTC with an invalid
framebuffer pitch. This is trickier than it should be as on gen4, there
is a restriction that tiled surfaces must have a stride less than 16k -
which is less than the largest supported CRTC size.
v2: Fix the limits for gen3
v3: Move check into intel_framebuffer_init() and fix VLV limits. (vsyrjala)
v4: Use idiomatic '>=' for generation checks
References: https://bugs.freedesktop.org/show_bug.cgi?id=65099
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 25 Jun 2013 13:38:21 +0000 (16:38 +0300)]
drm/i915: Remove duplicated WaForceL3Serialization:vlv
No need to apply WaForceL3Serialization:vlv twice.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 25 Jun 2013 09:06:52 +0000 (11:06 +0200)]
drm/i915: don't scream into dmesg when a modeset fails
There are legit cases, e.g. when userspace asks for something
impossible. So tune it down to debug output like we do with all other
userspace-triggerable warnings.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66111#c5
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Rebased.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 24 Jun 2013 19:33:28 +0000 (21:33 +0200)]
drm/i915: Fix up sdvo hpd pins for i965g/gm
Bspec seems to be full of lies, at least it disagress with reality:
Two systems corrobated that SDVO hpd bits are the same as on gen3.
v2: Update comment a bit.
Cc: Arthur Ranyan <arthur.j.runyan@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-and-tested-by: Alex Fiestas <afiestas@kde.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58405
Cc: stable@vger.kernel.org
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Mon, 24 Jun 2013 17:29:34 +0000 (18:29 +0100)]
drm/i915: Introduce an HAS_IPS() macro
Follow the trend and don't code conditions with platforms but with
features.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Fri, 7 Jun 2013 13:03:50 +0000 (16:03 +0300)]
drm/i915: fix build warning on format specifier mismatch
drivers/gpu/drm/i915/i915_gem.c: In function ‘i915_gem_object_bind_to_gtt’:
drivers/gpu/drm/i915/i915_gem.c:3002:3: warning: format ‘%ld’ expects
argument of type ‘long int’, but argument 5 has type ‘size_t’ [-Wformat]
v2: Use %zu instead of %d. Two char patch, and 100% wrong. (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 24 Jun 2013 16:32:36 +0000 (18:32 +0200)]
drm/i915: tune down DIDL warning about too many outputs
Nothing the user (nor we) really can do about this, but upsets a nice
quiet boot.
Note that this happens mostly on SDVs where OEMs obviously haven't had
a chance yet to appropriately trim the output list.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65988
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Amend commit message a bit to clarify a question from Paulo.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Konrad Rzeszutek Wilk [Mon, 24 Jun 2013 15:47:48 +0000 (11:47 -0400)]
drm/i915: make compact dma scatter lists creation work with SWIOTLB backend.
Git commit
90797e6d1ec0dfde6ba62a48b9ee3803887d6ed4
("drm/i915: create compact dma scatter lists for gem objects") makes
certain assumptions about the under laying DMA API that are not always
correct.
On a ThinkPad X230 with an Intel HD 4000 with Xen during the bootup
I see:
[drm:intel_pipe_set_base] *ERROR* pin & fence failed
[drm:intel_crtc_set_config] *ERROR* failed to set mode on [CRTC:3], err = -28
Bit of debugging traced it down to dma_map_sg failing (in
i915_gem_gtt_prepare_object) as some of the SG entries were huge (3MB).
That unfortunately are sizes that the SWIOTLB is incapable of handling -
the maximum it can handle is a an entry of 512KB of virtual contiguous
memory for its bounce buffer. (See IO_TLB_SEGSIZE).
Previous to the above mention git commit the SG entries were of 4KB, and
the code introduced by above git commit squashed the CPU contiguous PFNs
in one big virtual address provided to DMA API.
This patch is a simple semi-revert - were we emulate the old behavior
if we detect that SWIOTLB is online. If it is not online then we continue
on with the new compact scatter gather mechanism.
An alternative solution would be for the the '.get_pages' and the
i915_gem_gtt_prepare_object to retry with smaller max gap of the
amount of PFNs that can be combined together - but with this issue
discovered during rc7 that might be too risky.
Reported-and-Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Chris Wilson <chris@chris-wilson.co.uk>
CC: Imre Deak <imre.deak@intel.com>
CC: Daniel Vetter <daniel.vetter@ffwll.ch>
CC: David Airlie <airlied@linux.ie>
CC: <dri-devel@lists.freedesktop.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rui Guo [Wed, 19 Jun 2013 13:10:23 +0000 (21:10 +0800)]
drm/i915: Fix PCH detect with multiple ISA bridges in VM
In some virtualized environments (e.g. XEN), there is irrelevant ISA bridge in
the system. To work reliably, we should scan trhough all the ISA bridge
devices and check for the first match, instead of only checking the first one.
Signed-off-by: Rui Guo <firemeteor@users.sourceforge.net>
[danvet: Fixup conflict with the num_pch_pll removal. And add
subsystem header to the commit message headline.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Wed, 12 Jun 2013 20:27:30 +0000 (17:27 -0300)]
drm/i915: rename intel_dp_destroy to intel_dp_connector_destroy
Because it's the function that destroys the connector, not the
encoder. And we already have intel_dp_encoder_destroy.
This has annoyed me for a long time.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Zoltan Nyul <zoltan.nyul@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Mon, 1 Jul 2013 04:10:20 +0000 (14:10 +1000)]
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
- Various fixes that make surviving concurrent piglit more possible.
- Buffer object deletion no longer synchronous
- Context/register initialisation updates that have been reported to
solve some stability issues (particularly on some problematic GF119
chips)
- Kernel side support for VP2 video decoding engines
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (44 commits)
drm/nvd0-/disp: handle case where display engine is missing/disabled
drm/gr/nvc0-: merge nvc0/nve0 ucode, and use cpp instead of m4
drm/nouveau/bsp/nv84: initial vp2 engine implementation
drm/nouveau/vp/nv84: initial vp2 engine implementation
drm/nouveau/core: xtensa engine base class implementation
drm/nouveau/vdec: fork vp3 implementations from vp2
drm/nouveau/core: move falcon class to engine/
drm/nouveau/kms: don't fail if there's no dcb table entries
drm/nouveau: remove limit on gart
drm/nouveau/vm: perform a bar flush when flushing vm
drm/nvc0/gr: cleanup register lists, and add nvce/nvcf to switches
drm/nvc8/gr: update initial register/context values
drm/nvc4/gr: update initial register/context values
drm/nvc1/gr: update initial register/context values
drm/nvc3/gr: update initial register/context values
drm/nvc0/gr: update initial register/context values
drm/nvd9/gr: update initial register/context values
drm/nve4/gr: update initial register/context values
drm/nvc0-/gr: bump maximum gpc/tpc limits
drm/nvf0/gr: initial register/context setup
...
Maarten Lankhorst [Thu, 27 Jun 2013 07:35:53 +0000 (17:35 +1000)]
drm/nvd0-/disp: handle case where display engine is missing/disabled
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 5 Jun 2013 00:28:12 +0000 (10:28 +1000)]
drm/gr/nvc0-: merge nvc0/nve0 ucode, and use cpp instead of m4
No code changes, proven by envyas producing identical binaries.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ilia Mirkin [Thu, 27 Jun 2013 04:14:01 +0000 (14:14 +1000)]
drm/nouveau/bsp/nv84: initial vp2 engine implementation
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ilia Mirkin [Thu, 27 Jun 2013 04:12:46 +0000 (14:12 +1000)]
drm/nouveau/vp/nv84: initial vp2 engine implementation
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ilia Mirkin [Thu, 27 Jun 2013 04:08:22 +0000 (14:08 +1000)]
drm/nouveau/core: xtensa engine base class implementation
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ilia Mirkin [Thu, 27 Jun 2013 04:04:20 +0000 (14:04 +1000)]
drm/nouveau/vdec: fork vp3 implementations from vp2
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 27 Jun 2013 03:59:01 +0000 (13:59 +1000)]
drm/nouveau/core: move falcon class to engine/
Not really "core" per-se. About to merge Ilia's work adding another
similar class for the VP2 xtensa engines, so, seems like a good time to
move all these to engine/.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 25 Jun 2013 02:26:42 +0000 (12:26 +1000)]
drm/nouveau/kms: don't fail if there's no dcb table entries
Fixes module not loading on Tesla K20.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Maarten Lankhorst [Mon, 17 Jun 2013 13:09:09 +0000 (15:09 +0200)]
drm/nouveau: remove limit on gart
Most graphics cards nowadays have a multiple of this limit as their vram,
so limiting GART doesn't seem to make much sense.
Signed-off-by: Maarten >Lnkhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Maarten Lankhorst [Tue, 11 Jun 2013 12:17:25 +0000 (14:17 +0200)]
drm/nouveau/vm: perform a bar flush when flushing vm
Appears to fix the regression from "drm/nvc0/vm: handle bar tlb flushes
internally".
nvidia always seems to do this flush after writing values.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 14 May 2013 03:09:28 +0000 (13:09 +1000)]
drm/nvc0/gr: cleanup register lists, and add nvce/nvcf to switches
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 14 May 2013 00:54:32 +0000 (10:54 +1000)]
drm/nvc8/gr: update initial register/context values
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 13 May 2013 23:23:52 +0000 (09:23 +1000)]
drm/nvc4/gr: update initial register/context values
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 13 May 2013 08:29:02 +0000 (18:29 +1000)]
drm/nvc1/gr: update initial register/context values
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 13 May 2013 04:45:56 +0000 (14:45 +1000)]
drm/nvc3/gr: update initial register/context values
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 13 May 2013 02:57:10 +0000 (12:57 +1000)]
drm/nvc0/gr: update initial register/context values
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sun, 12 May 2013 22:33:52 +0000 (08:33 +1000)]
drm/nvd9/gr: update initial register/context values
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 7 May 2013 04:30:52 +0000 (14:30 +1000)]
drm/nve4/gr: update initial register/context values
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 6 May 2013 06:44:17 +0000 (16:44 +1000)]
drm/nvc0-/gr: bump maximum gpc/tpc limits
Needed for GK110, separate commit to catch any unexpected breaks to
other parts of the code.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 6 May 2013 06:00:20 +0000 (16:00 +1000)]
drm/nvf0/gr: initial register/context setup
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 6 May 2013 05:27:44 +0000 (15:27 +1000)]
drm/nve7/gr: update initial register/context values
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 6 May 2013 01:35:37 +0000 (11:35 +1000)]
drm/nve6/gr: update initial register/context values
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 6 May 2013 23:48:30 +0000 (09:48 +1000)]
drm/nouveau: delay busy bo vma removal until fence signals
As opposed to an explicit wait. Allows userspace to not stall waiting
on buffer deletion.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 6 May 2013 22:36:33 +0000 (08:36 +1000)]
drm/nouveau/vm: make each vma take a reference on its parent vm
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 13 May 2013 12:30:56 +0000 (22:30 +1000)]
drm/nouveau/core: remove nouveau_mm.mutex, no more users
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 13 May 2013 12:26:26 +0000 (22:26 +1000)]
drm/nouveau/vm: take subdev mutex, not the mm, protects against race with vm/nvc0
nvc0_vm_flush() accesses the pgd list, which will soon be able to race
with vm_unlink() during channel destruction.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 13 May 2013 12:07:16 +0000 (22:07 +1000)]
drm/nvc0/vm: handle bar tlb flushes internally
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>