OSDN Git Service
Peter Maydell [Tue, 23 Jun 2020 12:55:52 +0000 (13:55 +0100)]
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/renesas-hw-
20200622' into staging
Renesas hardware patches
- Add a common entry for Renesas hardware in MAINTAINERS
- Trivial SH4 cleanups
- Add RX GDB simulator from Yoshinori Sato
The Renesas RX target emulation was added in commit
c8c35e5f51,
these patches complete the target by adding the hardware emulation.
Tests included:
$ avocado --show=app,console run -t arch:rx tests/acceptance/
Fetching asset from tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_uboot
Fetching asset from tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_linux_sash
(1/2) tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_uboot:
console: U-Boot
2016.05-rc3-23705-ga1ef3c71cb-dirty (Feb 05 2019 - 21:56:06 +0900)
PASS (0.26 s)
(2/2) tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_linux_sash:
console: Linux version 4.19.0+ (yo-satoh@yo-satoh-debian) (gcc version 9.0.0
20181105 (experimental) (GCC)) #137 Wed Feb 20 23:20:02 JST 2019
console: Built 1 zonelists, mobility grouping on. Total pages: 8128
console: Kernel command line:
console: Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
console: Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
console: Memory: 14648K/32768K available (871K kernel code, 95K rwdata, 140K rodata, 96K init, 175K bss, 18120K reserved, 0K cma-reserved)
console: NR_IRQS: 256
console: rx-cmt: used for periodic clock events
console: clocksource: rx-tpu: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:
1274173631191 ns
console: 96.00 BogoMIPS (lpj=480000)
console: pid_max: default: 4096 minimum: 301
console: Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
console: Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
console: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:
19112604462750000 ns
console: clocksource: Switched to clocksource rx-tpu
console: workingset: timestamp_bits=30 max_order=12 bucket_order=0
console: SuperH (H)SCI(F) driver initialized
console: 88240.serial: ttySC0 at MMIO 0x88240 (irq = 215, base_baud = 0) is a sci
console: console [ttySC0] enabled
console: 88248.serial: ttySC1 at MMIO 0x88248 (irq = 219, base_baud = 0) is a sci
console: random: get_random_bytes called from 0x01002e48 with crng_init=0
console: Freeing unused kernel memory: 96K
console: This architecture does not have kernel memory protection.
console: Run /sbin/init as init process
console: Run /etc/init as init process
console: Run /bin/init as init process
console: Run /bin/sh as init process
console: Sash command shell (version 1.1.1)
console: /> printenv
console: HOME=/
console: TERM=linux
PASS (0.73 s)
RESULTS : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 1.47 s
CI results:
. https://cirrus-ci.com/build/
6140199509950464
. https://travis-ci.org/github/philmd/qemu/builds/
700954881
. https://app.shippable.com/github/philmd/qemu/runs/812/summary/console
# gpg: Signature made Mon 22 Jun 2020 19:52:09 BST
# gpg: using RSA key
FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/renesas-hw-
20200622:
docs: Document the RX target
BootLinuxConsoleTest: Test the RX GDB simulator
hw/rx: Add RX GDB simulator
hw/rx: Register R5F562N7 and R5F562N8 MCUs
hw/rx: Honor -accel qtest
hw/rx: RX62N microcontroller (MCU)
hw/char: RX62N serial communication interface (SCI)
hw/timer: RX62N compare match timer (CMT)
hw/timer: RX62N 8-Bit timer (TMR)
hw/intc: RX62N interrupt controller (ICUa)
hw/timer/sh_timer: Remove unused 'qemu/timer.h' include
hw/sh4: Extract timer definitions to 'hw/timer/tmu012.h'
hw/sh4: Use MemoryRegion typedef
MAINTAINERS: Add an entry for common Renesas peripherals
MAINTAINERS: Cover sh_intc files in the R2D/Shix machine sections
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 22 Jun 2020 19:50:10 +0000 (20:50 +0100)]
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/acceptance-testing-
20200622' into staging
Acceptance tests patches
- List acceptance test reviewers in MAINTAINERS
- Record/Replay tests from Pavel Dovgalyuk
Example of use:
$ avocado --show=app,replay run -t machine:vexpress-a9 tests/acceptance/replay_kernel.py
Fetching asset from tests/acceptance/replay_kernel.py:ReplayKernel.test_arm_vexpressa9
(1/1) tests/acceptance/replay_kernel.py:ReplayKernel.test_arm_vexpressa9:
replay: recording the execution...
replay: finished the recording with log size 204784 bytes
replay: elapsed time 6.44 sec
replay: replaying the execution...
replay: successfully finished the replay
replay: elapsed time 7.97 sec
replay: replay overhead 23.86%
PASS (14.67 s)
Travis-CI:
https://travis-ci.org/github/philmd/qemu/jobs/
700787719
# gpg: Signature made Mon 22 Jun 2020 09:58:13 BST
# gpg: using RSA key
FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/acceptance-testing-
20200622:
tests/acceptance: record/replay tests with advcal images
tests/acceptance: add record/replay test for m68k
tests/acceptance: add record/replay test for ppc64
tests/acceptance: add record/replay test for arm
tests/acceptance: add record/replay test for aarch64
tests/acceptance: add kernel record/replay test for x86_64
tests/acceptance: add base class record/replay kernel tests
MAINTAINERS: Add an entry to review Avocado based acceptance tests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Yoshinori Sato [Thu, 23 Jan 2020 13:25:25 +0000 (22:25 +0900)]
docs: Document the RX target
Add rx-virt target specification document.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <
20200308130637.37651-1-ysato@users.sourceforge.jp>
[PMD: Cover in MAINTAINERS, rename as gdbsim, use machine argument]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Philippe Mathieu-Daudé [Fri, 24 May 2019 03:17:04 +0000 (05:17 +0200)]
BootLinuxConsoleTest: Test the RX GDB simulator
Add two tests for the rx-gdbsim machine, based on the recommended
test setup from Yoshinori Sato:
https://lists.gnu.org/archive/html/qemu-devel/2019-05/msg03586.html
- U-Boot prompt
- Linux kernel with Sash shell
These are very quick tests:
$ avocado run -t arch:rx tests/acceptance/machine_rx_gdbsim.py
JOB ID :
84a6ef01c0b87975ecbfcb31a920afd735753ace
JOB LOG : /home/phil/avocado/job-results/job-2019-05-24T05.02-
84a6ef0/job.log
(1/2) tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_uboot: PASS (0.11 s)
(2/2) tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_linux_sash: PASS (0.45 s)
RESULTS : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
Tests can also be run with:
$ avocado --show=console run -t arch:rx tests/acceptance/machine_rx_gdbsim.py
console: U-Boot
2016.05-rc3-23705-ga1ef3c71cb-dirty (Feb 05 2019 - 21:56:06 +0900)
console: Linux version 4.19.0+ (yo-satoh@yo-satoh-debian) (gcc version 9.0.0
20181105 (experimental) (GCC)) #137 Wed Feb 20 23:20:02 JST 2019
console: Built 1 zonelists, mobility grouping on. Total pages: 8128
...
console: SuperH (H)SCI(F) driver initialized
console: 88240.serial: ttySC0 at MMIO 0x88240 (irq = 215, base_baud = 0) is a sci
console: console [ttySC0] enabled
console: 88248.serial: ttySC1 at MMIO 0x88248 (irq = 219, base_baud = 0) is a sci
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <
20200224141923.82118-22-ysato@users.sourceforge.jp>
[PMD: Replace obsolete set_machine() by machine tag, and rename as gdbsim]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Yoshinori Sato [Mon, 21 Jan 2019 13:16:00 +0000 (22:16 +0900)]
hw/rx: Add RX GDB simulator
Add the RX machine internally simulated in GDB.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Use TYPE_RX62N_CPU, use #define for RX62N_NR_TMR/CMT/SCI,
renamed CPU -> MCU, device -> microcontroller]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20200224141923.82118-18-ysato@users.sourceforge.jp>
[PMD: Split of MCU, rename gdbsim, Add gdbsim-r5f562n7/r5f562n8]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Philippe Mathieu-Daudé [Sat, 30 May 2020 16:35:29 +0000 (18:35 +0200)]
hw/rx: Register R5F562N7 and R5F562N8 MCUs
Make the current TYPE_RX62N_MCU an abstract class, and
generate TYPE_R5F562N7_MCU and TYPE_R5F562N8_MCU models.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Richard Henderson [Fri, 31 May 2019 13:43:07 +0000 (08:43 -0500)]
hw/rx: Honor -accel qtest
Issue an error if no kernel, no bios, and not qtest'ing.
Fixes make check-qtest-rx: test/qom-test.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20190531134315.4109-16-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Yoshinori Sato [Mon, 21 Jan 2019 13:16:00 +0000 (22:16 +0900)]
hw/rx: RX62N microcontroller (MCU)
rx62n - RX62N cpu.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Use TYPE_RX62N_CPU, use #define for RX62N_NR_TMR/CMT/SCI,
renamed CPU -> MCU, device -> microcontroller]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20200224141923.82118-18-ysato@users.sourceforge.jp>
[PMD: Rebased on
b77b5b3dc7, split of machine, use &error_abort]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Yoshinori Sato [Mon, 21 Jan 2019 13:15:59 +0000 (22:15 +0900)]
hw/char: RX62N serial communication interface (SCI)
This module supported only non FIFO type.
Hardware manual.
https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01uh0033ej0140_rx62n.pdf
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20200224141923.82118-17-ysato@users.sourceforge.jp>
[PMD: Filled VMStateField for migration]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Yoshinori Sato [Wed, 20 Mar 2019 14:16:05 +0000 (23:16 +0900)]
hw/timer: RX62N compare match timer (CMT)
renesas_cmt: 16bit compare match timer modules.
This part use many renesas's CPU.
Hardware manual.
https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01uh0033ej0140_rx62n.pdf
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20200224141923.82118-16-ysato@users.sourceforge.jp>
[PMD: Split from TMR, filled VMStateField for migration]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Yoshinori Sato [Wed, 20 Mar 2019 14:16:05 +0000 (23:16 +0900)]
hw/timer: RX62N 8-Bit timer (TMR)
renesas_tmr: 8bit timer modules.
This part use many renesas's CPU.
Hardware manual.
https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01uh0033ej0140_rx62n.pdf
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20200224141923.82118-16-ysato@users.sourceforge.jp>
[PMD: Split from CMT, filled VMStateField for migration]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Yoshinori Sato [Mon, 21 Jan 2019 13:15:57 +0000 (22:15 +0900)]
hw/intc: RX62N interrupt controller (ICUa)
This implementation supported only ICUa.
Hardware manual.
https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01uh0033ej0140_rx62n.pdf
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20200224141923.82118-15-ysato@users.sourceforge.jp>
[PMD: Fill VMStateField for migration, cover files in MAINTAINERS]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Philippe Mathieu-Daudé [Mon, 4 May 2020 08:16:53 +0000 (10:16 +0200)]
hw/timer/sh_timer: Remove unused 'qemu/timer.h' include
Remove unused "qemu/timer.h" include.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Philippe Mathieu-Daudé [Mon, 4 May 2020 08:16:52 +0000 (10:16 +0200)]
hw/sh4: Extract timer definitions to 'hw/timer/tmu012.h'
Extract timer definitions to 'hw/timer/tmu012.h'.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Philippe Mathieu-Daudé [Mon, 4 May 2020 08:16:51 +0000 (10:16 +0200)]
hw/sh4: Use MemoryRegion typedef
Use the MemoryRegion type defined in "qemu/typedefs.h",
to keep the repository style consistent.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Philippe Mathieu-Daudé [Wed, 10 Jun 2020 21:32:38 +0000 (23:32 +0200)]
MAINTAINERS: Add an entry for common Renesas peripherals
Renesas peripherals are common to SH4/RX based MCUs. Their
datasheets share common sections. It makes sense to maintain
them altogether.
Add the uncovered UART SCI peripheral.
The current names are misleading (see the 'sh_' prefix).
In another series we will remove these peripherals with
the 'renesas_' prefix. Out of the scope of this change in
MAINTAINERS.
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Philippe Mathieu-Daudé [Wed, 10 Jun 2020 21:41:52 +0000 (23:41 +0200)]
MAINTAINERS: Cover sh_intc files in the R2D/Shix machine sections
Commit
81527b94ad added hw/intc/sh_intc.c, but only to the R2D
machine (it is also used by the Shix machine). Complete the
previous commit by adding the header to the R2D section, and
both source + header to the Shix section.
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Peter Maydell [Mon, 22 Jun 2020 13:45:25 +0000 (14:45 +0100)]
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-
20200619-3' into staging
This is a range of patches for RISC-V.
Some key points are:
- Generalise the CPU init functions
- Support the SiFive revB machine
- Improvements to the Hypervisor implementation and error checking
- Connect some OpenTitan devices
- Changes to the sifive_u machine to support U-boot
v2:
- Fix missing realise assert
# gpg: Signature made Fri 19 Jun 2020 17:34:34 BST
# gpg: using RSA key
F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-
20200619-3: (32 commits)
hw/riscv: sifive_u: Add a dummy DDR memory controller device
hw/riscv: sifive_u: Sort the SoC memmap table entries
hw/riscv: sifive_u: Support different boot source per MSEL pin state
hw/riscv: sifive: Change SiFive E/U CPU reset vector to 0x1004
target/riscv: Rename IBEX CPU init routine
hw/riscv: sifive_u: Add a new property msel for MSEL pin state
hw/riscv: sifive_u: Rename serial property get/set functions to a generic name
hw/riscv: sifive_u: Add reset functionality
hw/riscv: sifive_gpio: Do not blindly trigger output IRQs
hw/riscv: sifive_u: Hook a GPIO controller
hw/riscv: sifive_gpio: Add a new 'ngpio' property
hw/riscv: sifive_gpio: Clean up the codes
hw/riscv: sifive_u: Generate device tree node for OTP
hw/riscv: sifive_u: Simplify the GEM IRQ connect code a little bit
hw/riscv: opentitan: Remove the riscv_ prefix of the machine* and soc* functions
hw/riscv: sifive_e: Remove the riscv_ prefix of the machine* and soc* functions
target/riscv: Use a smaller guess size for no-MMU PMP
riscv/opentitan: Connect the UART device
riscv/opentitan: Connect the PLIC device
hw/intc: Initial commit of lowRISC Ibex PLIC
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pavel Dovgalyuk [Fri, 29 May 2020 07:05:25 +0000 (10:05 +0300)]
tests/acceptance: record/replay tests with advcal images
This patch adds more record/replay tests with kernel images.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Tested-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <
159073592589.20809.
5156301499042635614.stgit@pasha-ThinkPad-X280>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Use os.path.join(), add avocado 'cpu' tags]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Pavel Dovgalyuk [Fri, 29 May 2020 07:05:20 +0000 (10:05 +0300)]
tests/acceptance: add record/replay test for m68k
This patch adds a test for record/replay of the kernel
image boot for m68k platform.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Tested-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <
159073592033.20809.
1838967871297177313.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Pavel Dovgalyuk [Fri, 29 May 2020 07:05:13 +0000 (10:05 +0300)]
tests/acceptance: add record/replay test for ppc64
This patch adds a test for record/replay of the kernel
image boot for ppc64 platform.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Tested-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <
159073591363.20809.
15658672985367330140.stgit@pasha-ThinkPad-X280>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Pavel Dovgalyuk [Fri, 29 May 2020 07:05:07 +0000 (10:05 +0300)]
tests/acceptance: add record/replay test for arm
This patch adds a test for record/replay of the kernel
image boot for two different arm platforms.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Tested-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <
159073590785.20809.
17654573764167037499.stgit@pasha-ThinkPad-X280>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Pavel Dovgalyuk [Fri, 29 May 2020 07:05:02 +0000 (10:05 +0300)]
tests/acceptance: add record/replay test for aarch64
This patch adds a test for record/replay of the kernel
image boot for aarch64 platform.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Tested-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <
159073590231.20809.
9842179251741585482.stgit@pasha-ThinkPad-X280>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Pavel Dovgalyuk [Fri, 29 May 2020 07:04:56 +0000 (10:04 +0300)]
tests/acceptance: add kernel record/replay test for x86_64
This patch adds a test for record/replay an execution of x86_64 machine.
Execution scenario includes simple kernel boot, which allows testing
basic hardware interaction in RR mode.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Tested-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <
159073589656.20809.
14010247947948822435.stgit@pasha-ThinkPad-X280>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Skip test_x86_64_pc on Travis-CI]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Pavel Dovgalyuk [Fri, 29 May 2020 07:04:51 +0000 (10:04 +0300)]
tests/acceptance: add base class record/replay kernel tests
This patch adds a base for testing kernel boot recording and replaying.
Each test has the phase of recording and phase of replaying.
Virtual machines just boot the kernel and do not interact with
the network.
Structure and image links for the tests are borrowed from boot_linux_console.py
Testing controls the message pattern at the end of the kernel
boot for both record and replay modes. In replay mode QEMU is also
intended to finish the execution automatically.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Tested-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <
159073589099.20809.
14078431743098373301.stgit@pasha-ThinkPad-X280>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Keep imports sorted alphabetically]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Wed, 29 Jan 2020 16:45:05 +0000 (17:45 +0100)]
MAINTAINERS: Add an entry to review Avocado based acceptance tests
Acceptance tests can test any piece of the QEMU codebase.
As such, the directory holding them does not belong to a specific
subsystem with designated maintainers.
Each subsystem covered by a test is welcomed to add the test path
to its section.
See for example commits
71b290e70,
b11785ca2 or
5d480ddde.
Add an entry for to allow reviewers to be notified when acceptance /
integration tests are added or modified.
The designated reviewers are not maintainers, subsystem maintainers
are expected to merge their tests.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <
20200129212345.20547-30-philmd@redhat.com>
Message-Id: <
20200605165656.17578-1-philmd@redhat.com>
Peter Maydell [Fri, 19 Jun 2020 21:56:59 +0000 (22:56 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/audio-
20200619-pull-request' into staging
audio: bugfixes for jack backend and gus emulation.
# gpg: Signature made Fri 19 Jun 2020 14:17:22 BST
# gpg: using RSA key
4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/audio-
20200619-pull-request:
hw/audio/gus: Fix registers 32-bit access
audio/jack: simplify the re-init code path
audio/jack: honour the enable state of the audio device
audio/jack: do not remove ports when finishing
audio/jack: remove invalid set of input support bool
audio/jack: remove unused stopped state
audio/jack: fix invalid minimum buffer size check
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 17 Jun 2020 20:13:09 +0000 (13:13 -0700)]
qht: Fix threshold rate calculation
tests/qht-bench.c:287:29: error: implicit conversion from 'unsigned long'
to 'double' changes value from
18446744073709551615
to
18446744073709551616 [-Werror,-Wimplicit-int-float-conversion]
*threshold = rate * UINT64_MAX;
~ ^~~~~~~~~~
Fix this by splitting the 64-bit constant into two halves,
each of which is individually perfectly representable, the
sum of which produces the correct arithmetic result.
This is very likely just a sticking plaster over some underlying
incorrect code, but it will suppress the warning for the moment.
Cc: Emilio G. Cota <cota@braap.org>
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bin Meng [Tue, 16 Jun 2020 00:50:41 +0000 (17:50 -0700)]
hw/riscv: sifive_u: Add a dummy DDR memory controller device
It is enough to simply map the SiFive FU540 DDR memory controller
into the MMIO space using create_unimplemented_device(), to make
the upstream U-Boot v2020.07 DDR memory initialization codes happy.
Note we do not generate device tree fragment for the DDR memory
controller. Since the controller data in device tree consumes a
very large space (see fu540-hifive-unleashed-a00-ddr.dtsi in the
U-Boot source), and it is only needed by U-Boot SPL but not any
operating system, we choose not to generate the fragment here.
This also means when testing with U-Boot SPL, the device tree has
to come from U-Boot SPL itself, but not the one generated by QEMU
on the fly. The memory has to be set to 8GiB to match the real
HiFive Unleashed board when invoking QEMU (-m 8G).
With this commit, QEMU can boot U-Boot SPL built for SiFive FU540
all the way up to loading U-Boot proper from MMC:
$ qemu-system-riscv64 -nographic -M sifive_u,msel=6 -m 8G -bios u-boot-spl.bin
U-Boot SPL
2020.07-rc3-00208-g88bd5b1 (Jun 08 2020 - 20:16:10 +0800)
Trying to boot from MMC1
Unhandled exception: Load access fault
EPC:
0000000008009be6 TVAL:
0000000010050014
The above exception is expected because QSPI is unsupported yet.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
1592268641-7478-6-git-send-email-bmeng.cn@gmail.com
Message-Id: <
1592268641-7478-6-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Tue, 16 Jun 2020 00:50:40 +0000 (17:50 -0700)]
hw/riscv: sifive_u: Sort the SoC memmap table entries
Move the flash and DRAM to the end of the SoC memmap table.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
1592268641-7478-5-git-send-email-bmeng.cn@gmail.com
Message-Id: <
1592268641-7478-5-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Tue, 16 Jun 2020 00:50:39 +0000 (17:50 -0700)]
hw/riscv: sifive_u: Support different boot source per MSEL pin state
SiFive FU540 SoC supports booting from several sources, which are
controlled using the Mode Select (MSEL[3:0]) pins on the chip.
Typically, the boot process runs through several stages before it
begins execution of user-provided programs.
The SoC supports booting from memory-mapped QSPI flash, which is
how start_in_flash property is used for at present. This matches
MSEL = 1 configuration (QSPI0).
Typical booting flows involve the Zeroth Stage Boot Loader (ZSBL).
It's not necessary for QEMU to implement the full ZSBL ROM codes,
because we know ZSBL downloads the next stage program into the L2
LIM at address 0x8000000 and executes from there. We can bypass
the whole ZSBL execution and use "-bios" to load the next stage
program directly if MSEL indicates a ZSBL booting flow.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
1592268641-7478-4-git-send-email-bmeng.cn@gmail.com
Message-Id: <
1592268641-7478-4-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Tue, 16 Jun 2020 00:50:38 +0000 (17:50 -0700)]
hw/riscv: sifive: Change SiFive E/U CPU reset vector to 0x1004
Per the SiFive manual, all E/U series CPU cores' reset vector is
at 0x1004. Update our codes to match the hardware.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
1592268641-7478-3-git-send-email-bmeng.cn@gmail.com
Message-Id: <
1592268641-7478-3-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Tue, 16 Jun 2020 00:50:37 +0000 (17:50 -0700)]
target/riscv: Rename IBEX CPU init routine
Current IBEX CPU init routine name seems to be too generic.
Since it uses a different reset vector from the generic one,
it merits a dedicated name.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
1592268641-7478-2-git-send-email-bmeng.cn@gmail.com
Message-Id: <
1592268641-7478-2-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Mon, 8 Jun 2020 14:17:40 +0000 (07:17 -0700)]
hw/riscv: sifive_u: Add a new property msel for MSEL pin state
On SiFive FU540 SoC, the value stored at physical address 0x1000
stores the MSEL pin state that is used to control the next boot
location that ROM codes jump to.
Add a new property msel to sifive_u machine for this.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
1591625864-31494-12-git-send-email-bmeng.cn@gmail.com
Message-Id: <
1591625864-31494-12-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Mon, 8 Jun 2020 14:17:39 +0000 (07:17 -0700)]
hw/riscv: sifive_u: Rename serial property get/set functions to a generic name
In prepration to add more properties to this machine, rename the
existing serial property get/set functions to a generic name.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
1591625864-31494-11-git-send-email-bmeng.cn@gmail.com
Message-Id: <
1591625864-31494-11-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Mon, 8 Jun 2020 14:17:38 +0000 (07:17 -0700)]
hw/riscv: sifive_u: Add reset functionality
The HiFive Unleashed board wires GPIO pin#10 to the input of the
system reset signal. Let's set up the GPIO pin#10 and insert a
"gpio-restart" device tree node so that reboot is now functional
with QEMU 'sifive_u' machine.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
1591625864-31494-10-git-send-email-bmeng.cn@gmail.com
Message-Id: <
1591625864-31494-10-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Mon, 8 Jun 2020 14:17:37 +0000 (07:17 -0700)]
hw/riscv: sifive_gpio: Do not blindly trigger output IRQs
At present the GPIO output IRQs are triggered each time any GPIO
register is written. However this is not correct. We should only
trigger the output IRQ when the pin is configured as output enable.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
1591625864-31494-9-git-send-email-bmeng.cn@gmail.com
Message-Id: <
1591625864-31494-9-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Mon, 8 Jun 2020 14:17:36 +0000 (07:17 -0700)]
hw/riscv: sifive_u: Hook a GPIO controller
SiFive FU540 SoC integrates a GPIO controller with 16 GPIO lines.
This hooks the exsiting SiFive GPIO model to the SoC, and adds its
device tree data as well.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
1591625864-31494-8-git-send-email-bmeng.cn@gmail.com
Message-Id: <
1591625864-31494-8-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Mon, 8 Jun 2020 14:17:35 +0000 (07:17 -0700)]
hw/riscv: sifive_gpio: Add a new 'ngpio' property
Add a new property to represent the number of GPIO pins supported
by the GPIO controller.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
1591625864-31494-7-git-send-email-bmeng.cn@gmail.com
Message-Id: <
1591625864-31494-7-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Mon, 8 Jun 2020 14:17:34 +0000 (07:17 -0700)]
hw/riscv: sifive_gpio: Clean up the codes
Do various minor clean-ups to the exisiting codes for:
- coding convention conformance
- remove unnecessary blank lines
- spell SiFive correctly
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
1591625864-31494-6-git-send-email-bmeng.cn@gmail.com
Message-Id: <
1591625864-31494-6-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Mon, 8 Jun 2020 14:17:33 +0000 (07:17 -0700)]
hw/riscv: sifive_u: Generate device tree node for OTP
Upstream U-Boot v2020.07 codes switch to access SiFive FU540 OTP
based on device tree information. Let's generate the device tree
node for OTP.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
1591625864-31494-5-git-send-email-bmeng.cn@gmail.com
Message-Id: <
1591625864-31494-5-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Mon, 8 Jun 2020 14:17:32 +0000 (07:17 -0700)]
hw/riscv: sifive_u: Simplify the GEM IRQ connect code a little bit
There is no need to retrieve all PLIC IRQ information in order to
just connect the GEM IRQ. Use qdev_get_gpio_in() directly like
what is done for other peripherals.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
1591625864-31494-4-git-send-email-bmeng.cn@gmail.com
Message-Id: <
1591625864-31494-4-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Mon, 8 Jun 2020 14:17:31 +0000 (07:17 -0700)]
hw/riscv: opentitan: Remove the riscv_ prefix of the machine* and soc* functions
This was done in the virt & sifive_u codes, but opentitan codes were
missed. Remove the riscv_ prefix of the machine* and soc* functions.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
1591625864-31494-3-git-send-email-bmeng.cn@gmail.com
Message-Id: <
1591625864-31494-3-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Mon, 8 Jun 2020 14:17:30 +0000 (07:17 -0700)]
hw/riscv: sifive_e: Remove the riscv_ prefix of the machine* and soc* functions
This was done in the virt & sifive_u codes, but sifive_e codes were
missed. Remove the riscv_ prefix of the machine* and soc* functions.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
1591625864-31494-2-git-send-email-bmeng.cn@gmail.com
Message-Id: <
1591625864-31494-2-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Alistair Francis [Fri, 24 Apr 2020 01:47:38 +0000 (18:47 -0700)]
target/riscv: Use a smaller guess size for no-MMU PMP
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Alistair Francis [Thu, 23 Apr 2020 21:08:45 +0000 (14:08 -0700)]
riscv/opentitan: Connect the UART device
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alistair Francis [Fri, 24 Apr 2020 01:40:57 +0000 (18:40 -0700)]
riscv/opentitan: Connect the PLIC device
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Alistair Francis [Fri, 24 Apr 2020 01:34:15 +0000 (18:34 -0700)]
hw/intc: Initial commit of lowRISC Ibex PLIC
The Ibex core contains a PLIC that although similar to the RISC-V spec
is not RISC-V spec compliant.
This patch implements a Ibex PLIC in a somewhat generic way.
As the current RISC-V PLIC needs tidying up, my hope is that as the Ibex
PLIC move towards spec compliance this PLIC implementation can be
updated until it can replace the current PLIC.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Alistair Francis [Thu, 23 Apr 2020 21:07:27 +0000 (14:07 -0700)]
hw/char: Initial commit of Ibex UART
This is the initial commit of the Ibex UART device. Serial TX is
working, while RX has been implemeneted but untested.
This is based on the documentation from:
https://docs.opentitan.org/hw/ip/uart/doc/
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei<zhiwei_liu@c-sky.com>
Alistair Francis [Tue, 9 Jun 2020 23:08:29 +0000 (16:08 -0700)]
riscv/opentitan: Fix the ROM size
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reported-by: Damien Hedde <damien.hedde@greensocs.com>
Alistair Francis [Fri, 3 Apr 2020 22:54:59 +0000 (15:54 -0700)]
target/riscv: Implement checks for hfence
Call the helper_hyp_tlb_flush() function on hfence instructions which
will generate an illegal insruction execption if we don't have
permission to flush the Hypervisor level TLBs.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Alistair Francis [Fri, 3 Apr 2020 21:05:01 +0000 (14:05 -0700)]
target/riscv: Move the hfence instructions to the rvh decode
Also correct the name of the VVMA instruction.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Alistair Francis [Fri, 27 Mar 2020 19:54:45 +0000 (12:54 -0700)]
target/riscv: Report errors validating 2nd-stage PTEs
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Alistair Francis [Fri, 27 Mar 2020 19:53:40 +0000 (12:53 -0700)]
target/riscv: Set access as data_load when validating stage-2 PTEs
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Bin Meng [Thu, 11 Jun 2020 01:08:49 +0000 (18:08 -0700)]
riscv: Keep the CPU init routine names consistent
Adding a _ to keep some consistency among the CPU init routines.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
1591837729-27486-4-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Thu, 11 Jun 2020 01:08:48 +0000 (18:08 -0700)]
riscv: Generalize CPU init routine for the imacu CPU
There is no need to have two functions that have almost the same
codes for 32-bit and 64-bit imacu CPUs.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
1591837729-27486-3-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Thu, 11 Jun 2020 01:08:47 +0000 (18:08 -0700)]
riscv: Generalize CPU init routine for the gcsu CPU
There is no need to have two functions that have almost the same
codes for 32-bit and 64-bit gcsu CPUs.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
1591837729-27486-2-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Thu, 11 Jun 2020 01:08:46 +0000 (18:08 -0700)]
riscv: Generalize CPU init routine for the base CPU
There is no need to have two functions that have exactly the same
codes for 32-bit and 64-bit base CPUs.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
1591837729-27486-1-git-send-email-bmeng.cn@gmail.com
Message-Id: <
1591837729-27486-1-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Alistair Francis [Wed, 13 May 2020 17:42:46 +0000 (10:42 -0700)]
sifive_e: Support the revB machine
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Ian Jiang [Tue, 28 Jan 2020 00:37:07 +0000 (08:37 +0800)]
riscv: Add helper to make NaN-boxing for FP register
The function that makes NaN-boxing when a 32-bit value is assigned
to a 64-bit FP register is split out to a helper gen_nanbox_fpr().
Then it is applied in translating of the FLW instruction.
Signed-off-by: Ian Jiang <ianjiang.ict@gmail.com>
Message-Id: <
20200128003707.17028-1-ianjiang.ict@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Peter Maydell [Fri, 19 Jun 2020 10:44:03 +0000 (11:44 +0100)]
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-
20200618' into staging
s390x update:
- update Linux headers to 5.8-rc1 (for vfio-ccw path handling)
- vfio-ccw: add support for path handling
- documentation fix
# gpg: Signature made Thu 18 Jun 2020 16:36:04 BST
# gpg: using RSA key
C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [marginal]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [marginal]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [marginal]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-
20200618:
docs/s390x: fix vfio-ap device_del description
vfio-ccw: Add support for the CRW region and IRQ
s390x/css: Refactor the css_queue_crw() routine
vfio-ccw: Refactor ccw irq handler
vfio-ccw: Add support for the schib region
vfio-ccw: Refactor cleanup of regions
Linux headers: update
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allan Peramaki [Thu, 18 Jun 2020 10:36:23 +0000 (12:36 +0200)]
hw/audio/gus: Fix registers 32-bit access
Fix audio on software that accesses DRAM above 64k via register
peek/poke and some cases when more than 16 voices are used.
Cc: qemu-stable@nongnu.org
Fixes:
135f5ae1974c ("audio: GUSsample is int16_t")
Signed-off-by: Allan Peramaki <aperamak@pp1.inet.fi>
Tested-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id:
20200618103623.6031-1-philmd@redhat.com
Message-Id: <
20200615201757.16868-1-aperamak@pp1.inet.fi>
[PMD: Removed unrelated style changes]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Peter Maydell [Thu, 18 Jun 2020 15:52:09 +0000 (16:52 +0100)]
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Thu 18 Jun 2020 14:16:22 BST
# gpg: using RSA key
EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request: (33 commits)
net: Drop the NetLegacy structure, always use Netdev instead
net: Drop the legacy "name" parameter from the -net option
hw/net/e1000e: Do not abort() on invalid PSRCTL register value
colo-compare: Fix memory leak in packet_enqueue()
net/colo-compare.c: Correct ordering in complete and finalize
net/colo-compare.c: Check that colo-compare is active
net/colo-compare.c: Only hexdump packets if tracing is enabled
net/colo-compare.c: Fix deadlock in compare_chr_send
chardev/char.c: Use qemu_co_sleep_ns if in coroutine
net/colo-compare.c: Create event_bh with the right AioContext
net: use peer when purging queue in qemu_flush_or_purge_queue_packets()
net: cadence_gem: Fix RX address filtering
net: cadence_gem: TX_LAST bit should be set by guest
net: cadence_gem: Update the reset value for interrupt mask register
net: cadnece_gem: Update irq_read_clear field of designcfg_debug1 reg
net: cadence_gem: Add support for jumbo frames
net: cadence_gem: Fix up code style
net: cadence_gem: Move tx/rx packet buffert to CadenceGEMState
net: cadence_gem: Set ISR according to queue in use
net: cadence_gem: Define access permission for interrupt registers
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 18 Jun 2020 14:30:13 +0000 (15:30 +0100)]
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-
20200617a' into staging
Migration (and HMP and virtiofs) pull 2020-06-17
Migration:
HMP/migration and test changes from Mao Zhongyi
multifd fix from Laurent Vivier
HMP
qom-set partial reversion/change from David Hildenbrand
now you need -j to pass json format, but it's regained the
old 100M type format.
Memory leak fix from Pan Nengyuan
Virtiofs
fchmod seccomp fix from Max Reitz
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Wed 17 Jun 2020 19:34:58 BST
# gpg: using RSA key
45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-
20200617a:
migration: fix multifd_send_pages() next channel
docs/xbzrle: update 'cache miss rate' and 'encoding rate' to docs
monitor/hmp-cmds: improvements for the 'info migrate'
monitor/hmp-cmds: add 'goto end' to reduce duplicate code.
monitor/hmp-cmds: delete redundant Error check before invoke hmp_handle_error()
monitor/hmp-cmds: don't silently output when running 'migrate_set_downtime' fails
monitor/hmp-cmds: add units for migrate_parameters
tests/migration: fix unreachable path in stress test
tests/migration: mem leak fix
hmp: Make json format optional for qom-set
qom-hmp-cmds: fix a memleak in hmp_qom_get
virtiofsd: Whitelist fchmod
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Thomas Huth [Mon, 18 May 2020 18:01:03 +0000 (20:01 +0200)]
net: Drop the NetLegacy structure, always use Netdev instead
Now that the "name" parameter is gone, there is hardly any difference
between NetLegacy and Netdev anymore, so we can drop NetLegacy and always
use Netdev to simplify the code quite a bit.
The only two differences that were really left between Netdev and NetLegacy:
1) NetLegacy does not allow a "hubport" type. We can continue to block
this with a simple check in net_client_init1() for this type.
2) The "id" parameter was optional in NetLegacy (and an internal id
was chosen via assign_name() during initialization), but it is mandatory
for Netdev. To avoid that the visitor code bails out here, we have to
add an internal id to the QemuOpts already earlier now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Thomas Huth [Mon, 18 May 2020 18:01:02 +0000 (20:01 +0200)]
net: Drop the legacy "name" parameter from the -net option
It's been deprecated since QEMU v3.1, so it's time to finally
remove it. The "id" parameter can simply be used instead.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Philippe Mathieu-Daudé [Mon, 25 May 2020 12:23:30 +0000 (14:23 +0200)]
hw/net/e1000e: Do not abort() on invalid PSRCTL register value
libFuzzer found using 'qemu-system-i386 -M q35':
qemu: hardware error: e1000e: PSRCTL.BSIZE0 cannot be zero
CPU #0:
EAX=
00000000 EBX=
00000000 ECX=
00000000 EDX=
00000663
ESI=
00000000 EDI=
00000000 EBP=
00000000 ESP=
00000000
EIP=
0000fff0 EFL=
00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0000
00000000 0000ffff 00009300
CS =f000
ffff0000 0000ffff 00009b00
SS =0000
00000000 0000ffff 00009300
DS =0000
00000000 0000ffff 00009300
FS =0000
00000000 0000ffff 00009300
GS =0000
00000000 0000ffff 00009300
LDT=0000
00000000 0000ffff 00008200
TR =0000
00000000 0000ffff 00008b00
GDT=
00000000 0000ffff
IDT=
00000000 0000ffff
CR0=
60000010 CR2=
00000000 CR3=
00000000 CR4=
00000000
DR0=
00000000 DR1=
00000000 DR2=
00000000 DR3=
00000000
DR6=
ffff0ff0 DR7=
00000400
EFER=
0000000000000000
FCW=037f FSW=0000 [ST=0] FTW=00 MXCSR=
00001f80
FPR0=
0000000000000000 0000 FPR1=
0000000000000000 0000
FPR2=
0000000000000000 0000 FPR3=
0000000000000000 0000
FPR4=
0000000000000000 0000 FPR5=
0000000000000000 0000
FPR6=
0000000000000000 0000 FPR7=
0000000000000000 0000
XMM00=
00000000000000000000000000000000 XMM01=
00000000000000000000000000000000
XMM02=
00000000000000000000000000000000 XMM03=
00000000000000000000000000000000
XMM04=
00000000000000000000000000000000 XMM05=
00000000000000000000000000000000
XMM06=
00000000000000000000000000000000 XMM07=
00000000000000000000000000000000
==1988== ERROR: libFuzzer: deadly signal
#6 0x7fae4d3ea894 in __GI_abort (/lib64/libc.so.6+0x22894)
#7 0x563f4cc59a1d in hw_error (qemu-fuzz-i386+0xe8ca1d)
#8 0x563f4d7c93f2 in e1000e_set_psrctl (qemu-fuzz-i386+0x19fc3f2)
#9 0x563f4d7b798f in e1000e_core_write (qemu-fuzz-i386+0x19ea98f)
#10 0x563f4d7afc46 in e1000e_mmio_write (qemu-fuzz-i386+0x19e2c46)
#11 0x563f4cc9a0a7 in memory_region_write_accessor (qemu-fuzz-i386+0xecd0a7)
#12 0x563f4cc99c13 in access_with_adjusted_size (qemu-fuzz-i386+0xeccc13)
#13 0x563f4cc987b4 in memory_region_dispatch_write (qemu-fuzz-i386+0xecb7b4)
It simply sent the following 2 I/O command to the e1000e
PCI BAR #2 I/O region:
writew 0x0100 0x0c00 # RCTL = E1000_RCTL_DTYP_MASK
writeb 0x2170 0x00 # PSRCTL = 0
2813 static void
2814 e1000e_set_psrctl(E1000ECore *core, int index, uint32_t val)
2815 {
2816 if (core->mac[RCTL] & E1000_RCTL_DTYP_MASK) {
2817
2818 if ((val & E1000_PSRCTL_BSIZE0_MASK) == 0) {
2819 hw_error("e1000e: PSRCTL.BSIZE0 cannot be zero");
2820 }
Instead of calling hw_error() which abort the process (it is
meant for CPU fatal error condition, not for device logging),
log the invalid request with qemu_log_mask(LOG_GUEST_ERROR)
and return, ignoring the request.
Cc: qemu-stable@nongnu.org
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Derek Su [Fri, 22 May 2020 07:53:57 +0000 (15:53 +0800)]
colo-compare: Fix memory leak in packet_enqueue()
The patch is to fix the "pkt" memory leak in packet_enqueue().
The allocated "pkt" needs to be freed if the colo compare
primary or secondary queue is too big.
Replace the error_report of full queue with a trace event.
Signed-off-by: Derek Su <dereksu@qnap.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Lukas Straub [Fri, 22 May 2020 07:53:56 +0000 (15:53 +0800)]
net/colo-compare.c: Correct ordering in complete and finalize
In colo_compare_complete, insert CompareState into net_compares
only after everything has been initialized.
In colo_compare_finalize, remove CompareState from net_compares
before anything is deinitialized.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Lukas Straub [Fri, 22 May 2020 07:53:55 +0000 (15:53 +0800)]
net/colo-compare.c: Check that colo-compare is active
If the colo-compare object is removed before failover and a
checkpoint happens, qemu crashes because it tries to lock
the destroyed event_mtx in colo_notify_compares_event.
Fix this by checking if everything is initialized by
introducing a new variable colo_compare_active which
is protected by a new mutex colo_compare_mutex. The new mutex
also protects against concurrent access of the net_compares
list and makes sure that colo_notify_compares_event isn't
active while we destroy event_mtx and event_complete_cond.
With this it also is again possible to use colo without
colo-compare (periodic mode) and to use multiple colo-compare
for multiple network interfaces.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Lukas Straub [Fri, 22 May 2020 07:53:54 +0000 (15:53 +0800)]
net/colo-compare.c: Only hexdump packets if tracing is enabled
Else the log will be flooded if there is a lot of network
traffic.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Lukas Straub [Fri, 22 May 2020 07:53:53 +0000 (15:53 +0800)]
net/colo-compare.c: Fix deadlock in compare_chr_send
The chr_out chardev is connected to a filter-redirector
running in the main loop. qemu_chr_fe_write_all might block
here in compare_chr_send if the (socket-)buffer is full.
If another filter-redirector in the main loop want's to
send data to chr_pri_in it might also block if the buffer
is full. This leads to a deadlock because both event loops
get blocked.
Fix this by converting compare_chr_send to a coroutine and
putting the packets in a send queue.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Tested-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Lukas Straub [Fri, 22 May 2020 07:53:52 +0000 (15:53 +0800)]
chardev/char.c: Use qemu_co_sleep_ns if in coroutine
To be able to convert compare_chr_send to a coroutine in the
next commit, use qemu_co_sleep_ns if in coroutine.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Lukas Straub [Fri, 22 May 2020 07:53:51 +0000 (15:53 +0800)]
net/colo-compare.c: Create event_bh with the right AioContext
qemu_bh_new will set the bh to be executed in the main
loop. This causes crashes as colo_compare_handle_event assumes
that it has exclusive access the queues, which are also
concurrently accessed in the iothread.
Create the bh with the AioContext of the iothread to fulfill
these assumptions and fix the crashes. This is safe, because
the bh already takes the appropriate locks.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Derek Su <dereksu@qnap.com>
Tested-by: Derek Su <dereksu@qnap.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Jason Wang [Mon, 11 May 2020 04:04:53 +0000 (12:04 +0800)]
net: use peer when purging queue in qemu_flush_or_purge_queue_packets()
The sender of packet will be checked in the qemu_net_queue_purge() but
we use NetClientState not its peer when trying to purge the incoming
queue in qemu_flush_or_purge_packets(). This will trigger the assert
in virtio_net_reset since we can't pass the sender check:
hw/net/virtio-net.c:533: void virtio_net_reset(VirtIODevice *): Assertion
`!virtio_net_get_subqueue(nc)->async_tx.elem' failed.
#9 0x55a33fa31b78 in virtio_net_reset hw/net/virtio-net.c:533:13
#10 0x55a33fc88412 in virtio_reset hw/virtio/virtio.c:1919:9
#11 0x55a341d82764 in virtio_bus_reset hw/virtio/virtio-bus.c:95:9
#12 0x55a341dba2de in virtio_pci_reset hw/virtio/virtio-pci.c:1824:5
#13 0x55a341db3e02 in virtio_pci_common_write hw/virtio/virtio-pci.c:1252:13
#14 0x55a33f62117b in memory_region_write_accessor memory.c:496:5
#15 0x55a33f6205e4 in access_with_adjusted_size memory.c:557:18
#16 0x55a33f61e177 in memory_region_dispatch_write memory.c:1488:16
Reproducer:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg701914.html
Fix by using the peer.
Reported-by: "Alexander Bulekov" <alxndr@bu.edu>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
Fixes:
ca77d85e1dbf9 ("net: complete all queued packets on VM stop")
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Tong Ho [Tue, 12 May 2020 14:54:54 +0000 (20:24 +0530)]
net: cadence_gem: Fix RX address filtering
Two defects are fixed:
1/ Detection of multicast frames
2/ Treating drop of mis-addressed frames as non-error
Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sai Pavan Boddu [Tue, 12 May 2020 14:54:53 +0000 (20:24 +0530)]
net: cadence_gem: TX_LAST bit should be set by guest
TX_LAST bit should not be set by hardware, its set by guest to inform
the last bd of the frame.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sai Pavan Boddu [Tue, 12 May 2020 14:54:52 +0000 (20:24 +0530)]
net: cadence_gem: Update the reset value for interrupt mask register
Mask all interrupt on reset.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sai Pavan Boddu [Tue, 12 May 2020 14:54:51 +0000 (20:24 +0530)]
net: cadnece_gem: Update irq_read_clear field of designcfg_debug1 reg
Advertise support of clear-on-read for ISR registers.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sai Pavan Boddu [Tue, 12 May 2020 14:54:50 +0000 (20:24 +0530)]
net: cadence_gem: Add support for jumbo frames
Add a property "jumbo-max-len", which sets default value of jumbo frames
up to 16,383 bytes. Add Frame length checks for standard and jumbo
frames.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sai Pavan Boddu [Tue, 12 May 2020 14:54:49 +0000 (20:24 +0530)]
net: cadence_gem: Fix up code style
Fix the code style for register definitions.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sai Pavan Boddu [Tue, 12 May 2020 14:54:48 +0000 (20:24 +0530)]
net: cadence_gem: Move tx/rx packet buffert to CadenceGEMState
Moving this buffers to CadenceGEMState, as their size will be increased
more when JUMBO frames support is added.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sai Pavan Boddu [Tue, 12 May 2020 14:54:47 +0000 (20:24 +0530)]
net: cadence_gem: Set ISR according to queue in use
Set ISR according to queue in use, added interrupt support for
all queues.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sai Pavan Boddu [Tue, 12 May 2020 14:54:46 +0000 (20:24 +0530)]
net: cadence_gem: Define access permission for interrupt registers
Q1 to Q7 ISR's are clear-on-read, IER/IDR registers
are write-only, mask reg are read-only.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sai Pavan Boddu [Tue, 12 May 2020 14:54:45 +0000 (20:24 +0530)]
net: cadence_gem: Fix irq update w.r.t queue
Set irq's specific to a queue, present implementation is setting q1 irq
based on q0 status.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sai Pavan Boddu [Tue, 12 May 2020 14:54:44 +0000 (20:24 +0530)]
net: cadence_gem: Fix the queue address update during wrap around
During wrap around and reset, queues are pointing to initial base
address of queue 0, irrespective of what queue we are dealing with.
Fix it by assigning proper base address every time.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sai Pavan Boddu [Tue, 12 May 2020 14:54:43 +0000 (20:24 +0530)]
net: cadence_gem: Fix debug statements
Enabling debug breaks the build, Fix them and make debug statements
always compilable. Fix few statements to use sized integer casting.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Philippe Mathieu-Daudé [Thu, 23 Apr 2020 23:16:43 +0000 (01:16 +0200)]
hw/net/tulip: Log descriptor overflows
Log with GUEST_ERROR what the guest is doing wrong.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Philippe Mathieu-Daudé [Thu, 23 Apr 2020 23:16:42 +0000 (01:16 +0200)]
hw/net/tulip: Fix 'Descriptor Error' definition
Bit #14 is "DE" for 'Descriptor Error':
When set, indicates a frame truncation caused by a frame
that does not fit within the current descriptor buffers,
and that the 21143 does not own the next descriptor.
[Table 4-1. RDES0 Bit Fields Description]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Helge Deller [Sun, 26 Apr 2020 10:55:39 +0000 (12:55 +0200)]
Fix tulip breakage
The tulip network driver in a qemu-system-hppa emulation is broken in
the sense that bigger network packages aren't received any longer and
thus even running e.g. "apt update" inside the VM fails.
The breakage was introduced by commit
8ffb7265af ("check frame size and
r/w data length") which added checks to prevent accesses outside of the
rx/tx buffers.
But the new checks were implemented wrong. The variable rx_frame_len
counts backwards, from rx_frame_size down to zero, and the variable len
is never bigger than rx_frame_len, so accesses just can't happen and the
checks are unnecessary.
On the contrary the checks now prevented bigger packages to be moved
into the rx buffers.
This patch reverts the wrong checks and were sucessfully tested with a
qemu-system-hppa emulation.
Fixes:
8ffb7265af ("check frame size and r/w data length")
Buglink: https://bugs.launchpad.net/bugs/1874539
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Yuri Benditovich [Fri, 8 May 2020 12:59:34 +0000 (15:59 +0300)]
virtio-net: align RSC fields with updated virtio-net header
Removal of duplicated RSC definitions. Changing names of the
fields to ones defined in the Linux header.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Yuri Benditovich [Fri, 8 May 2020 12:59:33 +0000 (15:59 +0300)]
virtio-net: add migration support for RSS and hash report
Save and restore RSS/hash report configuration.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Yuri Benditovich [Fri, 8 May 2020 12:59:32 +0000 (15:59 +0300)]
vmstate.h: provide VMSTATE_VARRAY_UINT16_ALLOC macro
Similar to VMSTATE_VARRAY_UINT32_ALLOC, but the size is
16-bit field.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Yuri Benditovich [Fri, 8 May 2020 12:59:31 +0000 (15:59 +0300)]
virtio-net: reference implementation of hash report
Suggest VIRTIO_NET_F_HASH_REPORT if specified in device
parameters.
If the VIRTIO_NET_F_HASH_REPORT is set,
the device extends configuration space. If the feature
is negotiated, the packet layout is extended to
accomodate the hash information. In this case deliver
packet's hash value and report type in virtio header
extension.
Use for configuration the same procedure as already
used for RSS. We add two fields in rss_data that
controls what the device does with the calculated hash
if rss_data.enabled is set. If field 'populate' is set
the hash is set in the packet, if field 'redirect' is
set the hash is used to decide the queue to place the
packet to.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Yuri Benditovich [Fri, 8 May 2020 12:59:30 +0000 (15:59 +0300)]
tap: allow extended virtio header with hash info
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Yuri Benditovich [Fri, 8 May 2020 12:59:29 +0000 (15:59 +0300)]
virtio-net: implement RX RSS processing
If VIRTIO_NET_F_RSS negotiated and RSS is enabled, process
incoming packets, calculate packet's hash and place the
packet into respective RX virtqueue.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Yuri Benditovich [Fri, 8 May 2020 12:59:28 +0000 (15:59 +0300)]
virtio-net: implement RSS configuration command
Optionally report RSS feature.
Handle RSS configuration command and keep RSS parameters
in virtio-net device context.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Peter Maydell [Thu, 18 Jun 2020 11:15:33 +0000 (12:15 +0100)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- enhance handling of size-related BlockConf properties
- nvme: small fixes, refactoring and cleanups
- virtio-blk: On restart, process queued requests in the proper context
- icount: make dma reads deterministic
- iotests: Some fixes for rarely run cases
- .gitignore: Ignore storage-daemon files
- Minor code cleanups
# gpg: Signature made Wed 17 Jun 2020 15:47:19 BST
# gpg: using RSA key
DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (43 commits)
iotests: Add copyright line in qcow2.py
iotests/{190,291}: compat=0.10 is unsupported
iotests/229: data_file is unsupported
iotests/292: data_file is unsupported
iotests/041: Skip test_small_target for qed
iotests.py: Add skip_for_formats() decorator
block: lift blocksize property limit to 2 MiB
qdev-properties: add getter for size32 and blocksize
block: make BlockConf size props 32bit and accept size suffixes
qdev-properties: make blocksize accept size suffixes
qdev-properties: add size32 property type
qdev-properties: blocksize: use same limits in code and description
block: consolidate blocksize properties consistency checks
virtio-blk: store opt_io_size with correct size
.gitignore: Ignore storage-daemon files
hw/block/nvme: verify msix_init_exclusive_bar() return value
hw/block/nvme: add msix_qsize parameter
hw/block/nvme: Verify msix_vector_use() returned value
hw/block/nvme: factor out controller identify setup
hw/block/nvme: do cmb/pmr init as part of pci init
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 18 Jun 2020 10:23:15 +0000 (11:23 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/microvm-
20200617-pull-request' into staging
microvm: memory config tweaks
# gpg: Signature made Wed 17 Jun 2020 13:28:44 BST
# gpg: using RSA key
4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/microvm-
20200617-pull-request:
microvm: move virtio base to 0xfeb00000
x86: move max-ram-below-4g to pc
microvm: drop max-ram-below-4g support
microvm: use 3G split unconditionally
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Christian Borntraeger [Wed, 17 Jun 2020 16:06:04 +0000 (18:06 +0200)]
docs/s390x: fix vfio-ap device_del description
device_del requires an id and not a sysfsfile.
Fixes:
bac03ec72f1b ("s390x/vfio-ap: document hot plug/unplug of vfio-ap device")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
20200617160604.5593-1-borntraeger@de.ibm.com>
[CH: add missing '$']
Signed-off-by: Cornelia Huck <cohuck@redhat.com>