OSDN Git Service
Lars-Peter Clausen [Tue, 26 Mar 2013 18:43:00 +0000 (18:43 +0000)]
staging:iio:ad799x: Preallocate sample buffer
Avoid allocating and freeing the sample buffer for each transfer. Instead
allocate it once when we start sampling. Also pre-compute the number of bytes we
need to transfer in the same way.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Tue, 26 Mar 2013 18:43:00 +0000 (18:43 +0000)]
staging:iio:ad799x: Set IIO_CHAN_INFO_SCALE mask
The driver has support for reporting a channels scale, but none of the channels
set the IIO_CHAN_INFO_SCALE mask. Add the IIO_CHAN_INFO_SCALE to all channels to
indicate that the drivers supports reporting the scale.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Tue, 26 Mar 2013 18:43:00 +0000 (18:43 +0000)]
staging:iio:ad799x: Add helper macro for channel initialization
The ad779x channels all follow the same pattern. Add a helper macro to
initialize the channel spec, this allows us to drop quite a few lines.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Tue, 26 Mar 2013 18:43:00 +0000 (18:43 +0000)]
staging:iio:ad799x: Use i2c_smbus_{read,write}_word_data_swapped
Use i2c_smbus_{read,write}_word_data_swapped instead of open-coding it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Tue, 26 Mar 2013 18:43:00 +0000 (18:43 +0000)]
staging:iio:ad799x: Remove internal reference support
None of the devices supported by this driver have an internal voltage reference,
so remove support for it from the driver.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Tue, 26 Mar 2013 18:42:00 +0000 (18:42 +0000)]
staging:iio:ad799x: Remove unused ad799x_state fields
Remove fields from the ad799x_state struct which are not used.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 25 Mar 2013 08:58:00 +0000 (08:58 +0000)]
iio:trigger: Use dev_{set,get}_drvdata for private data management
Use dev_{set,get}_drvdata for managing private data attached to a trigger
instead of using a custom field in the iio_trigger struct.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 25 Mar 2013 08:58:00 +0000 (08:58 +0000)]
iio:trigger: Introduce iio_tigger_{set,get}_drvdata
Introduce iio_tigger_{set,get}_drvdata which allows to attach driver specific
data to a trigger. The functions wrap access to the triggers private_data field
and all current users are updated to use iio_tigger_{set,get}_drvdata instead of
directly accessing the private_data field. This is the first step towards
removing the private_data field from the iio_trigger struct.
The following coccinelle script has been used to update the drivers:
<smpl>
@@
struct iio_trigger *trigger;
expression priv;
@@
-trigger->private_data = priv
+iio_trigger_set_drv_data(trigger, priv)
@@
struct iio_trigger *trigger;
@@
-trigger->private_data
+iio_trigger_get_drv_data(trigger)
</smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
H Hartley Sweeten [Fri, 22 Mar 2013 22:57:40 +0000 (15:57 -0700)]
staging: comedi: s626: remove MC_DISABLE macro
This macro relies on a local variable having a specific name. Replace
it with a new helper function, s626_mc_disable().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 22:57:21 +0000 (15:57 -0700)]
staging: comedi: s626: remove MC_ENABLE macro
This macro relies on a local variable having a specific name. Replace
it with a new helper function, s626_mc_enable().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 22:57:02 +0000 (15:57 -0700)]
staging: comedi: s626: #ifdef out a block of unused code
Currently the unused s626_ai_rinsn() function is commented out with
/* ... */ on every line of the function. Remove those by using an
This block will be removed once it is determined that it really
is not needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 22:56:32 +0000 (15:56 -0700)]
staging: comedi: s626: cleanup comedi_lrange table
Reformat the whitespace in the comedi_lrange table and use the
BIP_RANGE() macro instead of generic RANGE() macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 22:56:13 +0000 (15:56 -0700)]
staging: comedi: s626: factor counter interrupt handling from s626_irq_handler()
Factor the code that handles the counter interrupt out of s626_irq_handler().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 22:55:51 +0000 (15:55 -0700)]
staging: comedi: s626: factor eos interrupt handling from s626_irq_handler()
Factor the code that handles the end of scan interrupt out of
s626_irq_handler().
Remove the printk noise when cfc_write_to_buffer() fails. The user
can't do anything about it anyway.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 22:55:29 +0000 (15:55 -0700)]
staging: comedi: s626: use a local var for the s->async in s626_irq_handler()
The comedi_async pointer is used a number of times in this function.
For aesthetic reasons, use a local variable for the pointer.
Also, since was already have a pointer to the "cmd" use that in the
for loop instead of s->async->cmd (or even async->cmd).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 22:55:07 +0000 (15:55 -0700)]
staging: comedi: s626: cleanup "subdevice" and "cmd" in s626_irq_handler()
The comedi_subdevice in this function is actually the dev->read_subdev
that was initialized during the attach of the board. Use that instead
of accessing the dev->subdevices array directly.
Also, get the comedi_cmd used in s626_irq_handler() when the function
is first entered.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 22:54:45 +0000 (15:54 -0700)]
staging: comedi: s626: factor dio interrupt handling from s626_irq_handler()
Factor the code that checks and handles the dio interrupts out of
s626_irq_handler().
This allows reducing the number of indents in the code and makes it
easier to follow.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 22:54:20 +0000 (15:54 -0700)]
staging: comedi: s626: simplify dio register access
This driver has three dio subdevices, each with 16 channels. These
subdevices use hardware registers that are spaced 0x10 bytes apart
for each "group" of 16 channels.
Create new macros to get the correct addresses for each register
based on the dio "group". Use the s->private (void *) to hold the
"group" number to use in the subdevice functions.
This allows removing struct dio_private and all its uses. It also
removes the ugly casts used to get the register address.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:57:48 +0000 (09:57 -0700)]
staging: comedi: ni_labpc: fix labpc_eeprom_insn_read()
The comedi core expects the (*insn_read) operations to read insn->n
values and return the number of values actually read.
Make this function work like the core expects.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:57:26 +0000 (09:57 -0700)]
staging: comedi: ni_labpc: return bool from labpc_use_continuous_mode()
This is a simple true/false test, return bool instead of int.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:56:48 +0000 (09:56 -0700)]
staging: comedi: ni_labpc: cleanup trigger setting in labpc_ai_cmd()
The (*do_cmdtest) already validated the cmd sources so the default
cases in the switch() statements can never happen.
Preclear to trigger bits and change the switch() statements to simple
if() tests to set the bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:56:25 +0000 (09:56 -0700)]
staging: comedi: ni_labpc: remove board attach noise
Remove the kernel noise in labpc_common_attach() as well as a couple
obvious comments.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:55:54 +0000 (09:55 -0700)]
staging: comedi: ni_labpc: dma requires an interrupt
DMA support only works if an interrupt is available.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:55:30 +0000 (09:55 -0700)]
staging: comedi: ni_labpc: allow board to attach without dma
If the dma channel is not available this driver will still work
with interrupts for the analog input subdevice command support.
In addition, only dma channels 1 and 3 are valid for the ISA
devices.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:55:08 +0000 (09:55 -0700)]
staging: comedi: ni_labpc: allow board to attach without interrupt
If the interrupt is not available this driver will still work
with command support disabled for the analog input subdevice.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:54:41 +0000 (09:54 -0700)]
staging: comedi: ni_labpc: return error from labpc_counter_set_mode()
Make sure labpc_counter_set_mode() was successfull and return any
errno back to the caller.
For the if/else conditions that either load the counter of just set
the mode, use a common error patch to check for the error.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:54:16 +0000 (09:54 -0700)]
staging: comedi: ni_labpc: cleanup labpc_counter_load() usage
For aesthetic reasons, move the labpc_counter_load() function so
it's by the labpc_counter_set_mode() function.
Update all the labpc_counter_load() calls so that the I8254_MODE*
enums are used instead of the open coded values.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:53:49 +0000 (09:53 -0700)]
staging: comedi: ni_labpc: introduce labpc_counter_set_mode()
Introduce labpc_counter_set_mode() which is a wrapper around the
i8254_set_mode() helpers to program the 8254 timers. Use the new
function instead of directly writing to the timer mode register
with a "magic" number.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:53:20 +0000 (09:53 -0700)]
staging: comedi: ni_labpc: remove inline from labpc_counter_load()
Let the compiler figure out if this function should be inlined.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:52:15 +0000 (09:52 -0700)]
staging: comedi: ni_labpc: move a couple of the #define's
For aesthetic reasons, move a couple of the #defines in this file
so that the register map defines are first.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:51:45 +0000 (09:51 -0700)]
staging: comedi: ni_labpc: clean up register map
Rename the register map defines to better match the National
Instruments Register-Level Programming Manual for the labpc.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:51:23 +0000 (09:51 -0700)]
staging: comedi: ni_labpc: clean up multi-line comments
Clean up the multi-line comments at the beginning of the file
so that they follow the CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:50:56 +0000 (09:50 -0700)]
staging: comedi: ni_labpc: fix a > 80 char line issue
Fix a checkpatch.pl warning about a line over 80 characters.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:50:31 +0000 (09:50 -0700)]
staging: comedi: ni_labpc: introduce labpc_ai_wait_for_data()
Introduce a helper function to wait for the a/d conversion to
complete.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:50:03 +0000 (09:50 -0700)]
staging: comedi: ni_labpc: introduce labpc_read_adc_fifo()
Introduce a helper function to read the a/d conversion result
from the fifo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:49:34 +0000 (09:49 -0700)]
staging: comedi: ni_labpc: introduce labpc_setup_cmd6_reg()
Introduce a helper function to set the COMMAND6_REG.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:49:10 +0000 (09:49 -0700)]
staging: comedi: ni_labpc:use labpc_cancel() to remove some common code
The labpc_cancel() function can be used by the labpc_ai_insn_read() and
labpc_ai_cmd() functions to disable the ai subdevice.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:48:44 +0000 (09:48 -0700)]
staging: comedi: ni_labpc: introduce labpc_ai_set_chan_and_gain()
Introduce a helper function to set the channel and gain bits in the
COMMAND1_REG.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:48:19 +0000 (09:48 -0700)]
staging: comedi: ni_labpc: cleanup local var declarations in labpc_ai_insn_read()
Determine the chan, range, and aref when the variables are declared.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:47:51 +0000 (09:47 -0700)]
staging: comedi: ni_labpc: cleanup local var declarations in labpc_ai_cmd()
Determine the scan_mode early and get the proper chanspec so that
the chan, range, and aref can be determined when the variables are
declared.
labpc_ai_chanlist_invalid() checks that all the range and aref values
in the chanlist are the same so, for consistency, use the same chanspec
used to get the chan.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:47:20 +0000 (09:47 -0700)]
staging: comedi: ni_labpc: remove unnecessary test of dev->irq
The ai subdevice (*do_cmd) pointer is only initialized if the
driver has successfully requested the interrupt. The extra test
in labpc_ai_cmd() is not necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:46:53 +0000 (09:46 -0700)]
staging: comedi: ni_labpc: move declaration of local var 'irq_flags'
In labpc_ai_cmd(), move the declaration of the local variable
'irq_flags' to remove the need for the extra #ifdef/#endif.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:46:28 +0000 (09:46 -0700)]
staging: comedi: ni_labpc: remove DRV_NAME
Remove the DRV_NAME define and just open code the string in the
comedi_driver and pci_driver declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:46:05 +0000 (09:46 -0700)]
staging: comedi: ni_labpc: use dev->board_name instead of DRV_NAME
In labpc_common_attach(), initialize the dev->board_name early and
use that instead of DRV_NAME when allocating the resources.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:45:41 +0000 (09:45 -0700)]
staging: comedi: ni_labpc: move declaration of local var 'dma_flags'
In labpc_common_attach(), move the declaration of the local variable
'dma_flags' to remove the need for the extra #ifdef/#endif.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:45:13 +0000 (09:45 -0700)]
staging: comedi: ni_labpc: tidy up subdevice init
Add some whitespace to the subdevice init.
Remove the unnecessary comment about adding command support to
the analog input subdevice and change the 'maxdata' value to hex
as this is more common in comedi drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:44:38 +0000 (09:44 -0700)]
staging: comedi: ni_labpc: fix 8255 dio subdevice init
The subdev_8255_init() function can fail. Check for failure and
return the errno.
Consolidate the mmio/ioport calls to subdev_8255_init(). The callback
function can be added with a simple ? : test and the cast of the iobase
is not necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:43:45 +0000 (09:43 -0700)]
staging: comedi: ni_labpc: fix command support with analog input subdevice
An interrupt is required for command support to work with the
analog input subdevice. When used with the ISA driver, enabling
the interrupt is optional. Fix the subdevice init so that command
support is only enabled if the irq is available.
Add some whitespace to the subdevice init. Change the 'maxdata'
value to hex as this is more common in comedi drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:43:14 +0000 (09:43 -0700)]
staging: comedi: ni_labpc: rename subdevice (*insn_{read, write}) functions
For aesthetic reasons, and to make grepping easier, rename all the
subdevice (*insn_read) and (*insn_write) functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:42:48 +0000 (09:42 -0700)]
staging: comedi: ni_labpc: introduce labpc_range_is_unipolar()
Introduce a helper function to determine if a range selection is
bipolar or unipolar.
This allows removing the static data 'labpc_range_is_unipolar' and
'labpc_plus_is_unipolar' as well as the boardinfo 'ai_range_is_unipolar'.
For consistency, also use the helper in labpc_ao_winsn() when
checking the range.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:42:18 +0000 (09:42 -0700)]
staging: comedi: ni_labpc: rename boardinfo 'memory_mapped_io'
Rename the boardinfo 'memory_mapped_io' to 'has_mmio'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:41:48 +0000 (09:41 -0700)]
staging: comedi: ni_labpc: rename local var 'thisboard'
For aesthetic reasons, rename the local variable 'thisboard' to
'board'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:39:22 +0000 (09:39 -0700)]
staging: comedi: ni_labpc: tidy up range table declarations
Tidy up all the tables used to indicate the bipolar/unipolar
type of the range. the gain bits used to set the range, and the
comedi_lrange.
Remove a couple unnecessary #define's used to indicate the size
of the tables as well as some unnecessary comments.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:41:22 +0000 (09:41 -0700)]
staging: comedi: ni_labpc: rename some of the private data variables
For aesthetic reasons, rename the 'command*_bits' and 'status*_bits'
variables in the private data in order to shorten some of the long
lines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:40:58 +0000 (09:40 -0700)]
staging: comedi: ni_labpc: remove 'volatile' from private data
As indicated by checkpatch.pl, "WARNING: Use of volatile is usually
wrong: ...". The variables in the private data that are marked
volatile don't need to be. Remove the volatile.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:40:36 +0000 (09:40 -0700)]
staging: comedi: ni_labpc: cleanup the boardinfo
For aesthetic reasons, add some whitespace to the boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:40:13 +0000 (09:40 -0700)]
staging: comedi: ni_labpc: remove "dummy" pci boardinfo entry
This driver uses the comedi auto config mechanism to attach to PCI
boards. The "dummy" entry in the boardinfo table is not needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:39:50 +0000 (09:39 -0700)]
staging: comedi: ni_labpc: remove boardinfo data that is set to '0'
It's not necessary to initialize the boardinfo data that is set
to '0'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:38:36 +0000 (09:38 -0700)]
staging: comedi: ni_labpc: remove forward declarations 4
Move the analog input support functions to remove the need for the
remaining forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:38:10 +0000 (09:38 -0700)]
staging: comedi: ni_labpc: remove forward declarations 3
Move the interrupt/dma support functions to remove the need for
some of the forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:37:37 +0000 (09:37 -0700)]
staging: comedi: ni_labpc: move the analog output support functions
For aesthetic reasons, move the analog output support functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:37:04 +0000 (09:37 -0700)]
staging: comedi: ni_labpc: remove forward declarations 2
Move the eeprom/caldac support functions to remove the need for
some of the forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:36:34 +0000 (09:36 -0700)]
staging: comedi: ni_labpc: remove forward declarations 1
Move the comedi_driver (*attach), (*auto_attach), and (*detach)
functions as well as a couple of the attach helper functions to
remove the need for a number of the forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:36:00 +0000 (09:36 -0700)]
staging: comedi: ni_labpc: add some whitespace to the *_driver declarations
For aesthetic reasons, add some whitespace to the comedi_driver and
pci_driver as well as the pci device table declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:34:39 +0000 (09:34 -0700)]
staging: comedi: ni_labpc: remove thisboard macro
The 'thisboard' macro relies on a local variable having a specific
name and yields a pointer derived from that local variable.
Replace the macro with a local variable and use the comedi_board()
helper to get the const pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 22 Mar 2013 16:34:09 +0000 (09:34 -0700)]
staging: comedi: ni_labpc: rename labpc_board_struct
For aesthetic reasons, rename labpc_board_struct to labpc_boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 19 Mar 2013 09:43:01 +0000 (09:43 +0000)]
staging: comedi: Kconfig: update CONFIG_AMPLC_DIO200_PCI help text
After splitting support for PCI cards out of the "amplc_dio200" module
into "amplc_dio200_pci", the help text needs updating.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 18 Mar 2013 17:19:09 +0000 (17:19 +0000)]
staging: comedi: amplc_dio200: split into ISA, PCI and common
Split the "amplc_dio200" comedi driver module into separate driver
modules for ISA and PCI boards with a common module for the shared code.
Keep the old name "amplc_dio200" for the ISA board driver as the module
may be modprobed with this name by a script. (If the script uses insmod
it will need modifying to load the "amplc_dio200_common" module first.)
Use the module name "amplc_dio200_pci" for the PCI board driver. On
most systems this will be auto-loaded.
Use the module name "amplc_dio200_common" for the module containing the
shared code. This is normally loaded as a dependency of the other two
modules.
"amplc_dio200_common" exports the following functions:
* `amplc_dio200_common_attach()`: this is basically the old
`dio200_common_attach()` from the combined driver module. It is
called from the driver-specific attach or auto-attach routines.
* `amplc_dio200_common_detach()`: this is most of the old
`dio200_detach()`. It is called from the driver-specific detach
routine.
* `amplc_dio200_set_enhance()`: this is a new function called during
initialization of PCIe cards to enable "enhanced" mode.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 18 Mar 2013 17:19:08 +0000 (17:19 +0000)]
staging: comedi: amplc_dio200: refactor dio200_handle_read_intr()
Refactor `dio200_handle_read_intr()` to fix checkpatch warning about too
many leading tabs. Factor out the part that puts the scan data into the
asynchronous command data buffer and checks for end of acquisition into
new function `dio200_read_scan_intr()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 18 Mar 2013 17:19:07 +0000 (17:19 +0000)]
staging: comedi: amplc_dio200: don't check bus-type in dio200_common_attach()
The "amplc_dio200" driver is going to be split into separate drivers for
ISA and PCI cards with a common module containing most of the code. We
don't want the common module code to depend on whether ISA boards, PCI
boards, or both are supported. Currently, `dio200_common_attach()` and
`dio200_detach()` optimize out the code to support a timer subdevice
when built to support ISA boards only. Remove the `if (DO_PCI)` tests
which optimize out that code. Unfortunately, this will expand the
module's code size for an ISA-only driver a bit.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 18 Mar 2013 17:19:06 +0000 (17:19 +0000)]
staging: comedi: amplc_dio200: remove dio200_report_attach()
`dio200_report_attach()` is called from `dio200_common_attach()` to
report the successful attachment of a supported board. It includes
various information about the board. Replace the function with a simple
acknowledgement that the attachment completed successfully. The
`dio200_attach()` and `dio200_auto_attach()` functions also output an
message during the attachment. Include extra information in those
messages to compensate for the removal of the information output by
`dio200_report_attach()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 18 Mar 2013 17:19:05 +0000 (17:19 +0000)]
staging: comedi: amplc_dio200: remove DIO200_DRIVER_NAME
Remove the `DIO200_DRIVER_NAME` macro which expands to the driver name
"amplc_dio200". Use the board name from our `struct dio200_board` when
requesting resources.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 18 Mar 2013 17:19:04 +0000 (17:19 +0000)]
staging: comedi: amplc_dio200: set board_name before common attach
`dio200_common_attach()` is called from `dio200_attach()` for ISA boards
and from `dio200_auto_attach()` for PCI boards. `dio200_auto_attach()`
assigns `dev->board_name` (where `dev` is the `struct comedi_device *`
under consideration) before calling `dio200_common_attach()`. Do the
same in `dio200_attach()` so it can be used there before the call to
`dio200_common_attach()`. This makes the assignment in
`dio200_common_attach()` unnessary, so remove the assignment from there.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 18 Mar 2013 17:19:03 +0000 (17:19 +0000)]
staging: comedi: amplc_dio200: dio200_common_attach() return 0
Change the successful return value of `dio200_common_attach()` from 1 to
0. This is propagated as the return value from the driver's "attach"
(`dio200_attach()`) or "auto_attach" (`dio200_auto_attach()`) handler.
Any non-negative value will do, but 0 is more conventional than 1.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 18 Mar 2013 17:19:02 +0000 (17:19 +0000)]
staging: comedi: amplc_dio200: shrink struct dio200_subdev_intr
Shave a few bytes off the size of `struct dio200_subdev_intr` by
rearranging members and changing two of them to bit-fields.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 18 Mar 2013 17:19:01 +0000 (17:19 +0000)]
staging: comedi: amplc_dio200: embed board layout in board structure
The amplc_dio200 driver supports both ISA and PCI boards, some of which
are quite similar. The driver takes advantage of this by defining a
"board layout" structure `struct dio200_layout` along with an array of
this structure `dio200_layouts[]` and an enumerated type for the indices
into this array `enum dio200_layout_idx`. The main board information
structure `struct dio200_board` contains a `layout` member holding an
enumerated index into the array of layouts and the enumerated layout
values are used to designate the indices in the initializer of
`dio200_layouts[]`.
We would like to split the ISA and PCI support into separate driver
modules and having the shared layouts makes this slightly awkward as the
enumerated values are condionally present depending on whether the
driver is configured to support ISA, PCI, or both.
Embed the `struct dio200_layout` into the main board information
structure `struct dio200_board` to make things simpler, discarding
`dio200_layouts[]` and the `enum dio200_layout_idx` in the process.
Only two of the layouts were used by more than one board anyway (each of
which was used by one ISA and one PCI board).
While we're at it, change the `has_int_sce`, `has_clk_gat_sce` and
`has_enhancements` members of `struct dio200_layout` to `bool:1`
bit-fields to save a few bytes.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 18 Mar 2013 17:19:00 +0000 (17:19 +0000)]
staging: comedi: amplc_dio200: Simplify PCI board look-up
Set the `driver_data` member of each element (apart from the sentinel)
of our PCI device table `dio200_pci_table[]` to the index of the
corresponding element of our private PCI board details
`dio200_pci_boards[]`. This index appears in the context parameter of
our auto_attach routine `dio200_auto_attach()`. In this function,
nename the parameter to `context_model` and use it to set
`dev->board_ptr` to point to an element of `dio200_pci_boards[] directly
by index instead of calling `dio200_find_pci_board()` to search for the
element whose `devid` member matches the PCI device ID.
Remove `dio200_find_pci_board()` and the `devid` member of `struct
dio200_board`. Also remove the `model` member of `struct dio200_board`
and the `enum dio200_model` type as we can do without them. The only
function that uses the `model` member is `dio200_auto_attach()`, so use
the `context_model` parameter instead.
Define the enumerated value for each PCI board in new type `enum
dio200_pci_model` which replaces `enum dio200_model` minus the
enumerated values for the ISA boards (so the numeric values for the PCI
boards have changed). Use these enumerated values to designate the
initializer for each element of `dio200_pci_boards[]`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 18 Mar 2013 17:18:59 +0000 (17:18 +0000)]
staging: comedi: amplc_dio200: don't check bus type in attach
Since the legacy attach routine `dio200_attach()` is only called for board
names matching an entry in our array of ISA boards
`dio200_isa_boards[]`, and it is reasonable to expect all elements of
`dio200_isa_boards[]` to have their `bustype` member initialized
correctly to `isa_bustype`, don't bother checking the bus type in
`dio200_attach()`. Add `if (!DO_ISA) return -EINVAL` to optimize out
the remainder of the function if `CONFIG_COMEDI_AMPLC_DIO200_ISA` is not
defined.
Similarly, don't bother checking the bus type in
`dio200_find_pci_board()` as it is reasonable to expect all elements of
`dio200_pci_boards[]` to have their `bustype` member initialized
correctly to `pci_bustype`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 18 Mar 2013 17:18:58 +0000 (17:18 +0000)]
staging: comedi: amplc_dio200: split dio200_boards[] into ISA & PCI
Split `dio200_boards[]` into `dio200_isa_boards[]` for ISA cards and
`dio200_pci_boards[]` for PCI cards. Only initialize the board-name
look-up members of `struct comedi_driver amplc_dio200_driver` if the ISA
part of the driver is enabled in the kernel config
(`CONFIG_COMEDI_AMPLC_DIO200_ISA`) using the array of ISA boards
(`dio200_isa_boards[]`). The driver doesn't allow manual configuration
of PCI devices, so there is no point having the comedi core match the
names of the PCI boards before it calls our driver's legacy attach
routine (`dio200_attach()`).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 19 Mar 2013 14:54:28 +0000 (10:54 -0400)]
staging: ti-soc-thermal: propagate error code
While writing talert thresholds, propagate the error code from
ti_bandgap_update_alert_threshold to the caller of
_ti_bandgap_write_threshold.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 19 Mar 2013 14:54:27 +0000 (10:54 -0400)]
staging: ti-soc-thermal: fix bitfield writing while updating thresholds
Wrong threshold cold values may be written with current implementation.
This patch fixes the threshold update function by simplifying the
bitfield manipulation sequence.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 19 Mar 2013 14:54:26 +0000 (10:54 -0400)]
staging: ti-soc-thermal: fix condition to apply hyst
While updating talert thresholds, threshold cold must
always be lower than threshold hot. This patch fixes
the function ti_bandgap_update_alert_threshold to only
change the thresholds by applying a hysteresis when
they violate this condition.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 19 Mar 2013 14:54:25 +0000 (10:54 -0400)]
staging: ti-soc-thermal: fix several kernel-doc warnings and error
This patch updates the documentation to remove
all warnings and errors reported by scripts/kernel-doc.
Most are missing arguments due to wrong format.
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 19 Mar 2013 14:54:24 +0000 (10:54 -0400)]
stating: ti-soc-thermal: use sizeof(*pointer) while allocating
Follow Documentation/CodingStyle and use sizeof(*pointer)
instead of sizeof(struct type).
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 19 Mar 2013 14:54:23 +0000 (10:54 -0400)]
staging: ti-soc-thermal: split writable data from readonly data
This patch changes the data structures of this driver so
that readonly data can reside only in the conf pointer.
Now each register has a struct to hold its configuration info,
to be used base on chip version for instance, and a
struct of values to be written, like register shadow and priv data.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 19 Mar 2013 14:54:22 +0000 (10:54 -0400)]
staging: ti-soc-thermal: make unexported functions local
Move _ti_bandgap_write_threshold and _ti_bandgap_read_threshold to static
area, as they are local functions.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 19 Mar 2013 14:54:21 +0000 (10:54 -0400)]
staging: ti-soc-thermal: rename symbols to use better prefix
As this driver has been renamed to cope with the chips it
is supposed to support, this patch also changes the symbol
names to use a proper prefix, so it is not suggestive that
this driver supports only OMAP devices.
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Benoit <b-cousson@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 19 Mar 2013 14:54:20 +0000 (10:54 -0400)]
staging: ti-soc-thermal: rename Kconfig options
This patch renames the Kconfig options to cope with
the new naming convention.
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Benoit <b-cousson@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 19 Mar 2013 14:54:19 +0000 (10:54 -0400)]
staging: rename omap-thermal driver to ti-soc-thermal
Because this driver will support also OMAP derivatives,
this patch does a big rename inside this driver, so it
better fits its usage.
This patch only renames the directory, file names,
includes, Makefiles and Kconfig includes.
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Benoit <b-cousson@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 19 Mar 2013 14:54:18 +0000 (10:54 -0400)]
staging: omap-thermal: rename bg_ptr to bgp
Use a shorter name to bandgap pointer.
Cc: Benoit <b-cousson@ti.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 19 Mar 2013 14:54:17 +0000 (10:54 -0400)]
staging: omap-thermal: fix return value
Return the proper error value in _omap_bandgap_read_threshold.
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masanari Iida [Thu, 21 Mar 2013 16:20:46 +0000 (01:20 +0900)]
staging: csr: Fix typos in csr
Correct spelling typos in comment witin csr.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabio Estevam [Sat, 23 Mar 2013 22:43:32 +0000 (19:43 -0300)]
staging: imx-drm: ipu-common: Fix sparse warnings
Fix the following sparse warnings:
drivers/staging/imx-drm/ipu-v3/ipu-common.c:232:42: warning: incorrect type in argument 1 (different address spaces)
drivers/staging/imx-drm/ipu-v3/ipu-common.c:232:42: expected struct ipu_ch_param [noderef] <asn:2>*base
drivers/staging/imx-drm/ipu-v3/ipu-common.c:232:42: got struct ipu_ch_param *p
drivers/staging/imx-drm/ipu-v3/ipu-common.c:233:42: warning: incorrect type in argument 1 (different address spaces)
drivers/staging/imx-drm/ipu-v3/ipu-common.c:233:42: expected struct ipu_ch_param [noderef] <asn:2>*base
drivers/staging/imx-drm/ipu-v3/ipu-common.c:233:42: got struct ipu_ch_param *p
drivers/staging/imx-drm/ipu-v3/ipu-common.c:234:42: warning: incorrect type in argument 1 (different address spaces)
drivers/staging/imx-drm/ipu-v3/ipu-common.c:234:42: expected struct ipu_ch_param [noderef] <asn:2>*base
drivers/staging/imx-drm/ipu-v3/ipu-common.c:234:42: got struct ipu_ch_param *p
drivers/staging/imx-drm/ipu-v3/ipu-common.c:237:42: warning: incorrect type in argument 1 (different address spaces)
drivers/staging/imx-drm/ipu-v3/ipu-common.c:237:42: expected struct ipu_ch_param [noderef] <asn:2>*base
drivers/staging/imx-drm/ipu-v3/ipu-common.c:237:42: got struct ipu_ch_param *p
drivers/staging/imx-drm/ipu-v3/ipu-common.c:238:42: warning: incorrect type in argument 1 (different address spaces)
drivers/staging/imx-drm/ipu-v3/ipu-common.c:238:42: expected struct ipu_ch_param [noderef] <asn:2>*base
drivers/staging/imx-drm/ipu-v3/ipu-common.c:238:42: got struct ipu_ch_param *p
drivers/staging/imx-drm/ipu-v3/ipu-common.c:239:42: warning: incorrect type in argument 1 (different address spaces)
drivers/staging/imx-drm/ipu-v3/ipu-common.c:239:42: expected struct ipu_ch_param [noderef] <asn:2>*base
drivers/staging/imx-drm/ipu-v3/ipu-common.c:239:42: got struct ipu_ch_param *p
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masanari Iida [Sun, 24 Mar 2013 14:24:00 +0000 (23:24 +0900)]
staging: sb105x: Fix typo in comments and printk
Correct spelling typos in comments and printk in
staging/sb105x
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kumar Amit Mehta [Mon, 25 Mar 2013 05:37:48 +0000 (22:37 -0700)]
staging: vme: fix for a potential NULL pointer dereference
Audit the return value of cdev_alloc and hence fixes a potential NULL pointer
dereferencing.
Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Bolle [Mon, 25 Mar 2013 10:13:07 +0000 (11:13 +0100)]
staging: sb105x: Remove obsolete CONFIG_M386
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Perches [Tue, 19 Mar 2013 03:55:41 +0000 (20:55 -0700)]
staging: vt6655: Remove unnecessary blank lines
Remove a bunch of useless vertical whitespace.
Convert 3 or more consecutive newlines to 2.
Remove blank lines after open brace and before close brace.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Perches [Tue, 19 Mar 2013 03:55:40 +0000 (20:55 -0700)]
staging: vt6655: Fix macro definitions
Macros should be able to be used in if/else
without braces.
Convert macros to use do {} while (0) instead
of bare braces where appropriate.
Convert macros to use single line macro definitions
where appropriate.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Perches [Tue, 19 Mar 2013 03:55:39 +0000 (20:55 -0700)]
staging: vt6655: Remove commented out if()s
Commented out code is just noise. Remove them.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Perches [Tue, 19 Mar 2013 03:55:38 +0000 (20:55 -0700)]
staging: vt6655: Remove unnecessary parentheses from returns
Returns aren't functions, remove the parentheses to be
more kernel style like.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>