OSDN Git Service
Leubner, Achim [Wed, 1 Apr 2009 14:16:08 +0000 (07:16 -0700)]
[SCSI] aacraid driver update
changes:
- set aac_cache=2 as default value to avoid performance problem
(Novell bugzilla #469922)
- Dell/PERC controller boot problem fixed (RedHat bugzilla #457552)
- WWN flag added to fix SLES10 SP1/SP2 drive detection problems
- 64-bit support changes
- DECLARE_PCI_DEVICE_TABLE macro added
- controller type changes
Signed-off-by: Achim Leubner <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Alan Cox [Wed, 1 Apr 2009 14:00:29 +0000 (15:00 +0100)]
[SCSI] mptsas: remove unneeded check
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Eric Moore <eric.moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Alan Cox [Wed, 1 Apr 2009 14:00:18 +0000 (15:00 +0100)]
[SCSI] config: Make need for SCSI_CDROM clearer
Mention ATAPI. We could insert an essay about libata and ide-scsi etc but
the failure case is someone enables it which is just fine so keep it
simple.
(Revised text from suggestion by Matthew Wilcox)
Closes #7736
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Ed Lin [Wed, 1 Apr 2009 01:30:41 +0000 (17:30 -0800)]
[SCSI] stex: update version to 4.6.0000.3
Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Ed Lin [Wed, 1 Apr 2009 01:30:36 +0000 (17:30 -0800)]
[SCSI] stex: add new 6G controller support
This adds the support of a new SAS 6G controller (st_yel)
Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Ed Lin [Wed, 1 Apr 2009 01:30:31 +0000 (17:30 -0800)]
[SCSI] stex: use config struct for parameters of different controllers
Use config struct (st_card_info) for parameters of different controllers
Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Ed Lin [Wed, 1 Apr 2009 01:30:25 +0000 (17:30 -0800)]
[SCSI] stex: add MSI support
This adds the MSI support (default 0=off)
Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Ed Lin [Wed, 1 Apr 2009 01:30:19 +0000 (17:30 -0800)]
[SCSI] stex: small code fixes and changes
These are some small code fixes and changes, including:
- use 64 bit when possible
- remove some unnecessary code (in interrupt, queuecommand routine etc.)
- code change for reset handler
Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Joe Eykholt [Tue, 17 Mar 2009 18:42:40 +0000 (11:42 -0700)]
[SCSI] fcoe, libfcoe: Add support for FIP. FCoE discovery and keep-alive.
FIP is the new standard way to discover Fibre-Channel Forwarders (FCFs)
by sending solicitations and listening for advertisements from FCFs.
It also provides for keep-alives and period advertisements so that both
parties know they have connectivity. If the FCF loses connectivity to
the storage fabric, it can send a Link Reset to inform the E_node.
This version is also compatible with pre-FIP implementations, so no
configured selection between FIP mode and non-FIP mode is required.
We wait a couple seconds after sending the initial solicitation
and then send an old-style FLOGI. If we receive any FIP frames,
we use FIP only mode. If the old FLOGI receives a response,
we disable FIP mode. After every reset or link up, this
determination is repeated.
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Joe Eykholt [Tue, 17 Mar 2009 18:42:35 +0000 (11:42 -0700)]
[SCSI] fcoe: Add a header file defining the FIP protocol for FCoE.
Adds include/scsi/fc/fc_fip.h for FIP protocol definitions.
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Vasu Dev [Tue, 17 Mar 2009 18:42:29 +0000 (11:42 -0700)]
[SCSI] fcoe, libfc: fix double fcoe_softc memory alloc
The foce_softc mem was reserved by libfc_host_alloc as well as
by fcoe_host_alloc.
Removes one liner fcoe_host_alloc completely, instead directly calls
libfc_host_alloc to alloc scsi_host with libfc for just one fcoe_softc
as fcoe private data.
Moves libfc_host_alloc to libfc.h since it is a libfc API, placed
lport_priv API adjacent to libfc_host_alloc since this is related
to scsi_host priv data.
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Vasu Dev [Tue, 17 Mar 2009 18:42:24 +0000 (11:42 -0700)]
[SCSI] fcoe: cleans up libfcoe.h and adds fcoe.h for fcoe module
Removes no where used several inline functions prefixed with skb_*
and be16_to_cpu.
Moves fcoe module specific func prototypes to fcoe.c from libfcoe.h,
moved only need for build.
Adds fcoe module header file fcoe.h and then moves fcoe module
specific fcoe_percpu_s and fcoe_softc to fcoe.h from libfcoe.h.
Moves all defines from fcoe.c to fcoe.h since now fcoe module
has its own header file fcoe.h.
[jejb: removed EXPORT_SYMBOL_GPL(fcoe_fc_crc) which caused a section mismatch]
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Vasu Dev [Tue, 17 Mar 2009 18:42:18 +0000 (11:42 -0700)]
[SCSI] fcoe: moves common FCoE library API functions to libfcoe module
Moves these functions as-is from fcoe.c to libfcoe.c, since
they're are common routines:
- fcoe_wwn_from_mac
- fcoe_libfc_config
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Vasu Dev [Tue, 17 Mar 2009 18:42:13 +0000 (11:42 -0700)]
[SCSI] fcoe, libfc: add libfcoe module
Just sets up build environment for libfcoe module towards a
libfcoe library for libfc LLDs using FCoE as libfc transport.
Common library code to libfcoe is added in next patch.
Also, updated MODULE_LICENSE from "GPL" string to "GPL v2" for
libfc, libfcoe and fcoe modules to accurately match the licenses.
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Vasu Dev [Fri, 27 Mar 2009 16:07:43 +0000 (09:07 -0700)]
[SCSI] fcoe: renames libfcoe.c to fcoe.c as the only fcoe module file
Renames libfcoe.c to fcoe.c, fcoe.c becomes the only
.c file for fcoe.ko.
Also deleted "$Id: Makefile" from fcoe module Makefle.
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Vasu Dev [Fri, 27 Mar 2009 16:06:31 +0000 (09:06 -0700)]
[SCSI] fcoe: removes default sw transport code file fcoe_sw.c
Moves only required code from fcoe_sw.c to libfcoe.c towards having
just one source file for fcoe module, this gets rid off default sw
transport code in a separate fcoe_sw.c file.
Very minor renaming along this move, dropped _sw_ or _SW_ use
in names and replaced them by _if_ as a auxiliary interface
functions. Now some of these funcs can be removed or merged with
other func after fcoe transport is gone, but that should be
in another patch to keep this patch simple.
Now the libfcoe.c file name for fcoe module doesn't go along well,
so the libfcoe.c file renaming to fcoe.c as the only single fcoe
module file is done in next patch to keep this patch clean
and small for review.
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Vasu Dev [Fri, 27 Mar 2009 16:05:17 +0000 (09:05 -0700)]
[SCSI] fcoe: removes fc_transport_fcoe.[ch] code files
Remove unused fc_transport_fcoe.c and fc_transport_fcoe.h
files.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Vasu Dev [Fri, 27 Mar 2009 16:03:29 +0000 (09:03 -0700)]
[SCSI] fcoe: prep work to completely remove fc_transport_fcoe code
The fcoe transport code was added for generic FCoE transport
infrastructure to allow additional offload related module loading
on demand, this is not required anymore after recently added
different offload approach by having offload related func ops
in netdev.
This patch removes fcoe transport related code use, calls functions
directly between existing libfcoe.c and fcoe_sw.c for now, for
example fcoe_sw_destroy and fcoe_sw_create calling.
The fcoe_sw.c and libfcoe.c code will be further consolidated in
later patches and then also the default fcoe sw transport code
file fcoe_sw.c will be completely removed.
The fcoe transport code files are completely removed in next
patch to keep this patch simple for reviewing.
[This patch is an update to a previous patch. This update
resolves a build error as well as fixes a defect related to
not calling fc_release_transport().]
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Robert Love [Tue, 17 Mar 2009 18:41:46 +0000 (11:41 -0700)]
[SCSI] fcoe: create/destroy fcoe Rx threads on CPU hotplug events
This patch adds support for dynamically created Rx threads
upon CPU hotplug events.
There were existing synchronization problems that this patch
attempts to resolve. The main problem had to do with fcoe_rcv()
running in a different context than the hotplug notifications.
This opened the possiblity that fcoe_rcv() would target a Rx
thread for a skb. However, that thread could become NULL if
the CPU was made offline.
This patch uses the Rx queue's (a skb_queue) lock to protect
the thread it's associated with and we use the 'thread' member
of the fcoe_percpu_s to determine if the thread is ready to
accept new skbs.
The patch also attempts to do a better job of cleaning up, both
if hotplug registration fails as well as when the module is
removed.
Contribution provided by Joe Eykholt <jeykholt@cisco.com> to
fix incorrect use of __cpuinitdata.
Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Robert Love [Tue, 31 Mar 2009 22:51:50 +0000 (15:51 -0700)]
[SCSI] fcoe: Use per-CPU kernel function for dev_stats instead of an array
Remove the hotplug creation of dev_stats, we allocate for all possible CPUs
now when we allocate the lport.
v2: Durring the 2.6.30 merge window, before these patches were comitted,
'percpu_ptr' was renamed 'per_cpu_ptr'. This latest update updates this
patch for the name change.
Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Robert Love [Tue, 17 Mar 2009 18:41:35 +0000 (11:41 -0700)]
[SCSI] fcoe: Use percpu kernel funcs for struct fcoe_percpu_s
Convert fcoe_percpu array to use the per-cpu variables
that the kernel provides. Use the kernel's functions to
access this structure.
The cpu member of the fcoe_percpu_s is no longer needed,
so this patch removes it too.
Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Robert Love [Tue, 17 Mar 2009 18:41:30 +0000 (11:41 -0700)]
[SCSI] fcoe: Initialize all possilbe skb_queue(s) when module is loaded
Currently the skb_queue is initialized every time the associated
CPU goes online. This patch has libfcoe initializing the skb_queue
for all possible CPUs when the module is loaded.
This patch also re-orders some declarations in the fcoe_rcv()
function so the structure declarations are grouped before
the primitive declarations.
Lastly, this patch converts all CPU indicies to use unsigned int
since CPU indicies should not be negative.
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Boaz Harrosh [Tue, 31 Mar 2009 17:06:44 +0000 (20:06 +0300)]
[SCSI] osd_uld: Remove creation of osd_scsi class symlink
Remove the creation of the symlink from the device to
it's class. On modern systems this is already created by
a udev rule and would WARN on load. On old systems it is
not needed, none of the current osd user-mode tools use
this link.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Boaz Harrosh [Tue, 31 Mar 2009 17:05:29 +0000 (20:05 +0300)]
[SCSI] libosd: fix blk_put_request called from within request_end_io
A fix for a very serious and stupid bug in osd_initiator. It
used to call blk_put_request() regardless of if it was from
the end_io callback or if called after a sync execution.
It should call the unlocked version __blk_put_request() instead.
Also fixed is the remove of _abort_unexecuted_bios hack, and use of
blk_end_request(,-ERROR,) to deallocate half baked requests. I've
audited the code and it should be safe.
Reported and
Tested-by: Xu Yang <onlyxuyang@qq.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
James Bottomley [Mon, 30 Mar 2009 16:55:51 +0000 (16:55 +0000)]
[SCSI] fix recovered error handling
We have a problem with recovered error handling in that any command
which goes down as BLOCK_PC but which returns a sense code of RECOVERED
ERROR gets completed with -EIO. For actual SG_IO commands, this doesn't
matter at all, since the error return code gets dropped in favour of
req->errors which contain the SCSI completion code.
However, if this command is part of the block system, then it will pay
attention to the returned error code. In particularly if a SYNCHRONIZE
CACHE from a barrier command completes with RECOVERED ERROR, the
resulting -EIO on the barrier causes block to error the request and
return it to the filesystem. Fix this by converting the -EIO for
recovered error to zero, plus remove the printing of this from sd and sr
so the message isn't double printed.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Hannes Reinecke [Wed, 25 Mar 2009 10:19:37 +0000 (11:19 +0100)]
[SCSI] aic7xxx: leaves timer running on init failure
aic79xx leaves timers inserted when ahd_init() (which inserts
two timers at its very end) succeeds but ahd_pci_map_int()
fails. In this case ahd->init_level gets incremented to 5 only
when that function succeeds, but ahd_free() calls ahd_shutdown()
only when ahd->init_level == 5, and ahd_shutdown() is where the
timers get removed. Since the freeing of the IRQ is not controlled
by ahd->init_level, we should increment init_level prior to
calling ahd_pci_map_int().
Reported-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Tue, 24 Mar 2009 16:08:20 +0000 (09:08 -0700)]
[SCSI] qla2xxx: Update version number to 8.03.01-k1.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Harish Zunjarrao [Tue, 24 Mar 2009 16:08:19 +0000 (09:08 -0700)]
[SCSI] qla2xxx: Get FLT address in dword format.
FLTDS provides FLT address in the byte address format,
convert it to dword address for further use.
Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Seokmann Ju [Tue, 24 Mar 2009 16:08:18 +0000 (09:08 -0700)]
[SCSI] qla2xxx: Correct several PCI-EEH issues.
In addition to checking for potentially unnecessary iomem
readX()/writeX() operations, a pci_channel_io_perm_failure should
not trigger a full internal removal. Found during additional
testing with pSeries blade systems.
Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Tue, 24 Mar 2009 16:08:17 +0000 (09:08 -0700)]
[SCSI] qla2xxx: Don't cache VPD data for newer ISPs.
As updates will occur using low-level option-rom manipulation
routines.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Tue, 24 Mar 2009 16:08:16 +0000 (09:08 -0700)]
[SCSI] qla2xxx: Explicitly set the execution-throttle with recent ISPs.
Firmware semantics changed for 24xx and above ISPs in their
handling of the specified execution-throttle passed during
firmware initialization. The original codes use of a theoretical
maximum (0xffff, as carried over from earlier ISPs) could in fact
act as a throttle in some circumstances. Now set the value based
of the firmware's own 'resource' (exchange IOCBs) capabilities.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Tue, 24 Mar 2009 16:08:15 +0000 (09:08 -0700)]
[SCSI] qla2xxx: Reduce request queue-size overhead with recent ISPs.
The original code to 'resize request-queues' based on iocb-counts
and employed during early ISP23xx testing was too
overly-pessimistic with regards to latencies in the firmware
pulling requests. Recent ISPs can easily keep up processing a
stream of commands from an abbreviated (effectively, half the
original size) queue.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Tue, 24 Mar 2009 16:08:14 +0000 (09:08 -0700)]
[SCSI] qla2xxx: Always use an FLT's NVRAM/VPD region information.
Rather than assuming a particular layout of the data. Applies to
recent ISPs only.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Giridhar Malavali [Tue, 24 Mar 2009 16:08:13 +0000 (09:08 -0700)]
[SCSI] qla2xxx: Drop use of IRQF_DISABLE.
When IRQs are shared by multiple controllers and if the first one
to register does not disable the IRQ, then IRQ will be enabled
for all other controllers by default, irrespective of their
setting. With IRQF_DISABLED registration, the driver interrupt
routine was called with interrupt enabled always. Disbaling the
registration with IRQF_DISABLED, since driver code is re-entrant
safe and all critical sections are guarded with interrupt safe
locks.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Joe Carnuccio [Tue, 24 Mar 2009 16:08:12 +0000 (09:08 -0700)]
[SCSI] qla2xxx: Add EDC-update support.
Interface allows for the update of onboard EDC firmware
present on mezzanine ISP25xx type cards.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Lalit Chandivade [Tue, 24 Mar 2009 16:08:11 +0000 (09:08 -0700)]
[SCSI] qla2xxx: Export flash-block-size for application support.
In handling the RMW semantics needed to update regions not
falling on a sector boundary.
Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Shyam Sundar [Tue, 24 Mar 2009 16:08:10 +0000 (09:08 -0700)]
[SCSI] qla2xxx: Cleanup unused flags and #defines.
General cleanup of extraneous/legacy crud.
Additional cleanups and
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Lalit Chandivade [Tue, 24 Mar 2009 16:08:09 +0000 (09:08 -0700)]
[SCSI] qla2xxx: Remove implicit ISP-abort after a flash update.
For ISP24xx and above the ISP-abort after flash update is not
needed, as the only purpose it was serving was to update the boot
code and firmware versions in the scsi_qla_host_t structure. Now
an update of the versions will be done in the write-vpd path.
Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Additional cleanups and
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Lalit Chandivade [Thu, 26 Mar 2009 15:49:17 +0000 (08:49 -0700)]
[SCSI] qla2xxx: Add reset capabilities for application support.
Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Additional cleanups and
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Lalit Chandivade [Tue, 24 Mar 2009 16:08:07 +0000 (09:08 -0700)]
[SCSI] qla2xxx: Correct ISP abort semantics for NVRAM, VPD, and flash update.
Ensure that an ISP-abort has completed before performing any
update. After the update do not wait for an ISP-abort completion,
instead just wait until the ISP is reset. This avoids long
delays due to waiting for loop ready in qla2x00_abort_isp().
Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Additional cleanups and
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Joe Carnuccio [Tue, 24 Mar 2009 16:08:06 +0000 (09:08 -0700)]
[SCSI] qla2xxx: Add Flash-Access-Control support for recent ISPs.
Given the low-level interface varies from one flash-part
manufacturer to the next, the Flash-Access-Control (FAC) mailbox
command makes the specific flash type transparent to the driver
by encapsulating a basic set of accessor and update routines.
Use these new routines where applicable by querying FAC opcode
get-sector-size at init-time.
Additional cleanups and
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Tue, 24 Mar 2009 16:08:05 +0000 (09:08 -0700)]
[SCSI] qla2xxx: Ensure the timer and DPC routines complete prior to midlayer tear-down.
Since the routines can/will use resources such as devices and
rports that aren't valid after midlayer tear-down, correct this
potential race, by stopping the offending during the early stages
of the remove() callback.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Tue, 24 Mar 2009 16:08:04 +0000 (09:08 -0700)]
[SCSI] qla2xxx: Correct abort-semantics in qla2x00_abort_all_cmds().
As all commands queued on the physical HBA should be aborted and
returned to the upper-layers.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Tue, 24 Mar 2009 16:08:03 +0000 (09:08 -0700)]
[SCSI] qla2xxx: Update MPI/PHY version retrieval codes.
Reflects layout and format of latest specification.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Tue, 24 Mar 2009 16:08:02 +0000 (09:08 -0700)]
[SCSI] qla2xxx: Preserve an fcport's loop-id after terminate_rport_io().
Since in some circumstances, login-retries may be occuring in the
background via the DPC routine. This race, in the inadvertant
setting of the loop-id to 'NONE' breaks the existing retry logic.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Tue, 24 Mar 2009 16:08:01 +0000 (09:08 -0700)]
[SCSI] qla2xxx: Pass in optional extended-initialization control block.
Recent ISPs use this data to configure FCF information.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Tue, 24 Mar 2009 16:08:00 +0000 (09:08 -0700)]
[SCSI] qla2xxx: Always (re)read firmware version/capabilities information.
With recent ISPs loading firmware from flash, a flash-update to
the firmware-image region with a follow-on reset will reload the
new image.
Original caching of data only made sense when firmware was bound
with the driver.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Harish Zunjarrao [Tue, 24 Mar 2009 16:07:59 +0000 (09:07 -0700)]
[SCSI] qla2xxx: Use byte-address while reading FC boot code versions from flash.
The pcihdr variable is used to find valid boot code image to get
FC boot code versions from flash. The pcihdr variable should be
byte aligned.
Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Giridhar Malavali [Tue, 24 Mar 2009 16:07:58 +0000 (09:07 -0700)]
[SCSI] qla2xxx: Correct over-allocation of firmware-dump buffer.
fce_size should be calculated based on the FCE_SIZE #define.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Giridhar Malavali [Tue, 24 Mar 2009 16:07:57 +0000 (09:07 -0700)]
[SCSI] qla2xxx: Initialize FCE debugfs codes with the proper vha structure.
Earlier refactoring codes missed passing the proper vha structure
and instead passed the 'hardware-descriptor' ha.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Giridhar Malavali [Tue, 24 Mar 2009 16:07:56 +0000 (09:07 -0700)]
[SCSI] qla2xxx: Consolidate queuecommand implementations.
Post refactoring/multi-queue additions essentially eliminated the
need for separate ISP24XX+ queuecommand as isp_ops contains a
function pointer to the associated 'start_scsi()' operation.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Tue, 24 Mar 2009 16:07:55 +0000 (09:07 -0700)]
[SCSI] qla2xxx: Refactor request/response-queue register handling.
Original code used an overabundance of indirect pointers to
function helpers. Instead, the driver can exploit the immutable
properties of a queue's ISP-association and ID, which are both
known at queue initialization-time.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Brian King [Fri, 20 Mar 2009 20:44:40 +0000 (15:44 -0500)]
[SCSI] ibmvfc: Driver version 1.0.5
Bump driver version to 1.0.5.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Brian King [Fri, 20 Mar 2009 20:44:39 +0000 (15:44 -0500)]
[SCSI] ibmvfc: Improve ADISC timeout handling
The ibmvfc driver currently breaks the CRQ and essentially
resets the entire virtual FC adapter, killing all outstanding
ops to all attached targets, if an ADISC times out during target
discover/rediscovery. This patch adds some code to cancel the
ADISC if it times out, which prevents a single ADISC timeout from
affecting the other devices attached to the fabric.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Brian King [Fri, 20 Mar 2009 20:44:38 +0000 (15:44 -0500)]
[SCSI] ibmvfc: Show host maxframe_size
Set show_host_maxframe_size so that maxframe_size gets exported in
sysfs for the host.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Brian King [Fri, 20 Mar 2009 20:44:37 +0000 (15:44 -0500)]
[SCSI] ibmvfc: Fixup module parms attributes
The ibmvfc driver really does not handle dynamically changing disc_threads.
To change this dynamically would cause confusion in the driver regarding
the number of event structs allocated. Fix this by simply not allowing
disc_threads to be changed at runtime.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Brian King [Fri, 20 Mar 2009 20:44:35 +0000 (15:44 -0500)]
[SCSI] ibmvfc: Fix dropped interrupts
This patch fixes a problem of possible dropped interrupts. Currently,
the ibmvfc driver has a race condition where after ibmvfc_interrupt
gets run, the platform code clears the interrupt. This can result in
lost interrupts and, in worst case scenarios, result in command
timeouts. Fix this by implementing a tasklet similar to what the
ibmvscsi driver does so that interrupt processing is no longer done in
the actual interrupt handler, which eliminates the race.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Linus Torvalds [Fri, 3 Apr 2009 04:09:10 +0000 (21:09 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
Remove two unneeded exports and make two symbols static in fs/mpage.c
Cleanup after commit
585d3bc06f4ca57f975a5a1f698f65a45ea66225
Trim includes of fdtable.h
Don't crap into descriptor table in binfmt_som
Trim includes in binfmt_elf
Don't mess with descriptor table in load_elf_binary()
Get rid of indirect include of fs_struct.h
New helper - current_umask()
check_unsafe_exec() doesn't care about signal handlers sharing
New locking/refcounting for fs_struct
Take fs_struct handling to new file (fs/fs_struct.c)
Get rid of bumping fs_struct refcount in pivot_root(2)
Kill unsharing fs_struct in __set_personality()
Linus Torvalds [Fri, 3 Apr 2009 04:06:42 +0000 (21:06 -0700)]
Merge branch 'drm-linus' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (21 commits)
drm/radeon: load the right microcode on rs780
drm: remove unused "can_grow" parameter from drm_crtc_helper_initial_config
drm: fix EDID backward compat check
drm: sync the mode validation for INTERLACE/DBLSCAN
drm: fix typo in edid vendor parsing.
DRM: drm_crtc_helper.h doesn't actually need i2c.h
drm: fix missing inline function on 32-bit powerpc.
drm: Use pgprot_writecombine in GEM GTT mapping to get the right bits for !PAT.
drm/i915: Add a spinlock to protect the active_list
drm/i915: Fix SDVO TV support
drm/i915: Fix SDVO CREATE_PREFERRED_INPUT_TIMING command
drm/i915: Fix error in SDVO DTD and modeline convert
drm/i915: Fix SDVO command debug function
drm/i915: fix TV mode setting in property change
drm/i915: only set TV mode when any property changed
drm/i915: clean up udelay usage
drm/i915: add VGA hotplug support for 945+
drm/i915: correctly set IGD device's gtt size for KMS.
drm/i915: avoid hanging on to a stale pointer to raw_edid.
drm/i915: check for -EINVAL from vm_insert_pfn
...
Linus Torvalds [Fri, 3 Apr 2009 04:05:30 +0000 (21:05 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (54 commits)
glge: remove unused #include <version.h>
dnet: remove unused #include <version.h>
tcp: miscounts due to tcp_fragment pcount reset
tcp: add helper for counter tweaking due mid-wq change
hso: fix for the 'invalid frame length' messages
hso: fix for crash when unplugging the device
fsl_pq_mdio: Fix compile failure
fsl_pq_mdio: Revive UCC MDIO support
ucc_geth: Pass proper device to DMA routines, otherwise oops happens
i.MX31: Fixing cs89x0 network building to i.MX31ADS
tc35815: Fix build error if NAPI enabled
hso: add Vendor/Product ID's for new devices
ucc_geth: Remove unused header
gianfar: Remove unused header
kaweth: Fix locking to be SMP-safe
net: allow multiple dev per napi with GRO
r8169: reset IntrStatus after chip reset
ixgbe: Fix potential memory leak/driver panic issue while setting up Tx & Rx ring parameters
ixgbe: fix ethtool -A|a behavior
ixgbe: Patch to fix driver panic while freeing up tx & rx resources
...
Jack Steiner [Thu, 2 Apr 2009 23:59:48 +0000 (16:59 -0700)]
cpumask: fix slab corruption caused by alloc_cpumask_var_node()
Fix slab corruption caused by alloc_cpumask_var_node() overwriting the
tail end of an off-stack cpumask.
The function zeros out cpumask bits beyond the last possible cpu. The
starting point for zeroing should be the beginning of the mask offset by a
byte count derived from the number of possible cpus. The offset was
calculated in bits instead of bytes. This resulted in overwriting the end
of the cpumask.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Acked-by: Mike Travis <travis.sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: <stable@kernel.org> [2.6.29.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Robin Holt [Thu, 2 Apr 2009 23:59:47 +0000 (16:59 -0700)]
ia64: implement interrupt-enabling rwlocks
Implement __raw_read_lock_flags and __raw_write_lock_flags for the ia64
architecture.
[kosaki.motohiro@jp.fujitsu.com: typo fix]
Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Robin Holt [Thu, 2 Apr 2009 23:59:46 +0000 (16:59 -0700)]
Allow rwlocks to re-enable interrupts
Pass the original flags to rwlock arch-code, so that it can re-enable
interrupts if implemented for that architecture.
Initially, make __raw_read_lock_flags and __raw_write_lock_flags stubs
which just do the same thing as non-flags variants.
Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Robin Holt <holt@sgi.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Robin Holt [Thu, 2 Apr 2009 23:59:45 +0000 (16:59 -0700)]
Factor out #ifdefs from kernel/spinlock.c to LOCK_CONTENDED_FLAGS
SGI has observed that on large systems, interrupts are not serviced for a
long period of time when waiting for a rwlock. The following patch series
re-enables irqs while waiting for the lock, resembling the code which is
already there for spinlocks.
I only made the ia64 version, because the patch adds some overhead to the
fast path. I assume there is currently no demand to have this for other
architectures, because the systems are not so large. Of course, the
possibility to implement raw_{read|write}_lock_flags for any architecture
is still there.
This patch:
The new macro LOCK_CONTENDED_FLAGS expands to the correct implementation
depending on the config options, so that IRQ's are re-enabled when
possible, but they remain disabled if CONFIG_LOCKDEP is set.
Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Coly Li [Thu, 2 Apr 2009 23:59:44 +0000 (16:59 -0700)]
fs/ufs: return f_fsid for statfs(2)
Make ufs return f_fsid info for statfs(2).
Signed-off-by: Coly Li <coly.li@suse.de>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Coly Li [Thu, 2 Apr 2009 23:59:43 +0000 (16:59 -0700)]
fs/sysv: return f_fsid for statfs(2)
Make sysv file system return f_fsid info for statfs(2).
Signed-off-by: Coly Li <coly.li@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Coly Li [Thu, 2 Apr 2009 23:59:42 +0000 (16:59 -0700)]
fs/squashfs: return f_fsid for statfs(2)
Make squashfs return f_fsid info for statfs(2).
Signed-off-by: Coly Li <coly.li@suse.de>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Coly Li [Thu, 2 Apr 2009 23:59:41 +0000 (16:59 -0700)]
fs/reiserfs: return f_fsid for statfs(2)
Make reiserfs3 return f_fsid info for statfs(2). By Andreas' suggestion,
this patch populates a persistent f_fsid between boots/mounts with help of
on-disk uuid record.
Randy Dunlap reported a compiling error from v2 patch like:
fs/built-in.o: In function `reiserfs_statfs':
super.c:(.text+0x7332b): undefined reference to `crc32_le'
super.c:(.text+0x7333f): undefined reference to `crc32_le'
Also he provided helpful solution to fix this error. The modification of v3
patch is based on Randy's suggestion, add 'select CRC32' in fs/reiserfs/Kconfig.
Signed-off-by: Coly Li <coly.li@suse.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Coly Li [Thu, 2 Apr 2009 23:59:40 +0000 (16:59 -0700)]
fs/qnx4: return f_fsid for statfs(2)
Make qnx4 file system return f_fsid info for statfs(2).
Signed-off-by: Coly Li <coly.li@suse.de>
Acked-by: Anders Larsen <al@alarsen.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Coly Li [Thu, 2 Apr 2009 23:59:39 +0000 (16:59 -0700)]
fs/omfs: return f_fsid for statfs(2)
Make omfs return f_fsid info for statfs(2).
Signed-off-by: Coly Li <coly.li@suse.de>
Acked-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Coly Li [Thu, 2 Apr 2009 23:59:39 +0000 (16:59 -0700)]
fs/minix: return f_fsid for statfs(2)
Make minix file system return f_fsid info for statfs(2).
Signed-off-by: Coly Li <coly.li@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Coly Li [Thu, 2 Apr 2009 23:59:38 +0000 (16:59 -0700)]
fs/isofs: return f_fsid for statfs(2)
Make isofs return f_fsid info for statfs(2).
Signed-off-by: Coly Li <coly.li@suse.de>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Coly Li [Thu, 2 Apr 2009 23:59:37 +0000 (16:59 -0700)]
fs/hpfs: return f_fsid for statfs(2)
Make hpfs return f_fsid info for statfs(2).
Signed-off-by: Coly Li <coly.li@suse.de>
Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Coly Li [Thu, 2 Apr 2009 23:59:36 +0000 (16:59 -0700)]
fs/hfsplus: return f_fsid for statfs(2)
Make hfsplus return f_fsid info for statfs(2).
Signed-off-by: Coly Li <coly.li@suse.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Coly Li [Thu, 2 Apr 2009 23:59:35 +0000 (16:59 -0700)]
fs/hfs: return f_fsid for statfs(2)
Make hfs return f_fsid info for statfs(2).
Signed-off-by: Coly Li <coly.li@suse.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Coly Li [Thu, 2 Apr 2009 23:59:35 +0000 (16:59 -0700)]
fs/fat: return f_fsid for statfs(2)
Make fat return f_fsid info for statfs(2).
Signed-off-by: Coly Li <coly.li@suse.de>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Coly Li [Thu, 2 Apr 2009 23:59:34 +0000 (16:59 -0700)]
fs/efs: return f_fsid for statfs(2)
Make efs return f_fsid info for statfs(2), and do a little variable
renaming in efs_statfs().
Signed-off-by: Coly Li <coly.li@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Coly Li [Thu, 2 Apr 2009 23:59:33 +0000 (16:59 -0700)]
fs/cramfs: return f_fsid for statfs(2)
Make cramfs return f_fsid info for statfs(2).
Signed-off-by: Coly Li <coly.li@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Coly Li [Thu, 2 Apr 2009 23:59:32 +0000 (16:59 -0700)]
fs/befs: return f_fsid for statfs(2)
Make befs return f_fsid info for statfs(2).
Signed-off-by: Coly Li <coly.li@suse.de>
Cc: Sergey S. Kostyliov <rathamahata@php4.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Coly Li [Thu, 2 Apr 2009 23:59:32 +0000 (16:59 -0700)]
fs/affs: return f_fsid for statfs(2)
Make affs return f_fsid info for statfs(2).
Signed-off-by: Coly Li <coly.li@suse.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Coly Li [Thu, 2 Apr 2009 23:59:27 +0000 (16:59 -0700)]
fs/adfs: return f_fsid for statfs(2)
Currently many file systems in Linux kernel do not return f_fsid in statfs
info, the value is set as 0 in vfs layer. Anyway, in some conditions,
f_fsid from statfs(2) is useful, especially being used as (f_fsid, ino)
pair to uniquely identify a file.
Basic idea of the patches is generating a unique fs ID by
huge_encode_dev(sb->s_bdev->bd_dev) during file system mounting life time
(no endian consistent issue). sb is a point of struct super_block of
current mounted file system being accessed by statfs(2).
This patch:
Make adfs return f_fsid info for statfs(2), and do a little variable
renaming in adfs_statfs().
Signed-off-by: Coly Li <coly.li@suse.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: "Sergey S. Kostyliov" <rathamahata@php4.ru>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Bob Copeland <me@bobcopeland.com>
Cc: Anders Larsen <al@alarsen.net>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Jan Kara <jack@suse.cz>
Cc: Andreas Dilger <adilger@sun.com>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gerd Hoffmann [Thu, 2 Apr 2009 23:59:25 +0000 (16:59 -0700)]
preadv/pwritev: switch compat readv/preadv/writev/pwritev from fget to fget_light
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <linux-api@vger.kernel.org>
Cc: <linux-arch@vger.kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ralf Baechle [Thu, 2 Apr 2009 23:59:24 +0000 (16:59 -0700)]
preadv/pwritev: MIPS: Add preadv(2) and pwritev(2) syscalls.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <linux-api@vger.kernel.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gerd Hoffmann [Thu, 2 Apr 2009 23:59:23 +0000 (16:59 -0700)]
preadv/pwritev: Add preadv and pwritev system calls.
This patch adds preadv and pwritev system calls. These syscalls are a
pretty straightforward combination of pread and readv (same for write).
They are quite useful for doing vectored I/O in threaded applications.
Using lseek+readv instead opens race windows you'll have to plug with
locking.
Other systems have such system calls too, for example NetBSD, check
here: http://www.daemon-systems.org/man/preadv.2.html
The application-visible interface provided by glibc should look like
this to be compatible to the existing implementations in the *BSD family:
ssize_t preadv(int d, const struct iovec *iov, int iovcnt, off_t offset);
ssize_t pwritev(int d, const struct iovec *iov, int iovcnt, off_t offset);
This prototype has one problem though: On 32bit archs is the (64bit)
offset argument unaligned, which the syscall ABI of several archs doesn't
allow to do. At least s390 needs a wrapper in glibc to handle this. As
we'll need a wrappers in glibc anyway I've decided to push problem to
glibc entriely and use a syscall prototype which works without
arch-specific wrappers inside the kernel: The offset argument is
explicitly splitted into two 32bit values.
The patch sports the actual system call implementation and the windup in
the x86 system call tables. Other archs follow as separate patches.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <linux-api@vger.kernel.org>
Cc: <linux-arch@vger.kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gerd Hoffmann [Thu, 2 Apr 2009 23:59:21 +0000 (16:59 -0700)]
preadv/pwritev: create compat_writev()
Factor out some code from compat_sys_writev() which can be shared with the
upcoming compat_sys_pwritev().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <linux-api@vger.kernel.org>
Cc: <linux-arch@vger.kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gerd Hoffmann [Thu, 2 Apr 2009 23:59:20 +0000 (16:59 -0700)]
preadv/pwritev: create compat_readv()
This patch series:
Implement the preadv() and pwritev() syscalls. *BSD has this syscall for
quite some time.
Test code:
#if 0
set -x
gcc -Wall -O2 -o preadv $0
exit 0
#endif
/*
* preadv demo / test
*
* (c) 2008 Gerd Hoffmann <kraxel@redhat.com>
*
* build with "sh $thisfile"
*/
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <errno.h>
#include <inttypes.h>
#include <sys/uio.h>
/* ----------------------------------------------------------------- */
/* syscall windup */
#include <sys/syscall.h>
#if 0
/* WARNING: Be sure you know what you are doing if you enable this.
* linux syscall code isn't upstream yet, syscall numbers are subject
* to change */
# ifndef __NR_preadv
# ifdef __i386__
# define __NR_preadv 333
# define __NR_pwritev 334
# endif
# ifdef __x86_64__
# define __NR_preadv 295
# define __NR_pwritev 296
# endif
# endif
#endif
#ifndef __NR_preadv
# error preadv/pwritev syscall numbers are unknown
#endif
static ssize_t preadv(int fd, const struct iovec *iov, int iovcnt, off_t offset)
{
uint32_t pos_high = (offset >> 32) & 0xffffffff;
uint32_t pos_low = offset & 0xffffffff;
return syscall(__NR_preadv, fd, iov, iovcnt, pos_high, pos_low);
}
static ssize_t pwritev(int fd, const struct iovec *iov, int iovcnt, off_t offset)
{
uint32_t pos_high = (offset >> 32) & 0xffffffff;
uint32_t pos_low = offset & 0xffffffff;
return syscall(__NR_pwritev, fd, iov, iovcnt, pos_high, pos_low);
}
/* ----------------------------------------------------------------- */
/* demo/test app */
static char filename[] = "/tmp/preadv-XXXXXX";
static char outbuf[11] = "
0123456789";
static char inbuf[11] = "----------";
static struct iovec ovec[2] = {{
.iov_base = outbuf + 5,
.iov_len = 5,
},{
.iov_base = outbuf + 0,
.iov_len = 5,
}};
static struct iovec ivec[3] = {{
.iov_base = inbuf + 6,
.iov_len = 2,
},{
.iov_base = inbuf + 4,
.iov_len = 2,
},{
.iov_base = inbuf + 2,
.iov_len = 2,
}};
void cleanup(void)
{
unlink(filename);
}
int main(int argc, char **argv)
{
int fd, rc;
fd = mkstemp(filename);
if (-1 == fd) {
perror("mkstemp");
exit(1);
}
atexit(cleanup);
/* write to file: "56789-01234" */
rc = pwritev(fd, ovec, 2, 0);
if (rc < 0) {
perror("pwritev");
exit(1);
}
/* read from file: "78-90-12" */
rc = preadv(fd, ivec, 3, 2);
if (rc < 0) {
perror("preadv");
exit(1);
}
printf("result : %s\n", inbuf);
printf("expected: %s\n", "--129078--");
exit(0);
}
This patch:
Factor out some code from compat_sys_readv() which can be shared with the
upcoming compat_sys_preadv().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <linux-api@vger.kernel.org>
Cc: <linux-arch@vger.kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David VomLehn [Thu, 2 Apr 2009 23:59:15 +0000 (16:59 -0700)]
cramfs: propagate uncompression errors
Decompression errors can arise due to corruption of compressed blocks on
flash or in memory. This patch propagates errors detected during
decompression back to the block layer.
Signed-off-by: David VomLehn <dvomlehn@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Robin Holt [Thu, 2 Apr 2009 23:59:14 +0000 (16:59 -0700)]
xpc_sn2: fix max() warning about pointers of different types
Fix a minor compile warning when building on ia64.
drivers/misc/sgi-xp/xpc_sn2.c: In function `xpc_clear_remote_msgqueue_flags_sn2':
drivers/misc/sgi-xp/xpc_sn2.c:1746: warning: comparison of distinct pointer types lacks a cast
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Robin Holt [Thu, 2 Apr 2009 23:59:13 +0000 (16:59 -0700)]
sgi-gru: remove SGI_GRU as a valid config option for ia64 configs with SGI_UV
Some current configs turn on GRU for ia64. The GRU code does not
correctly load on boot on ia64 (GRU does continue to work for x86-64), so
changing the IA64 Kconfig to not select GRU on ia64 configs for now until
we have time to fix.
Signed-off-by: Robin Holt <holt@sgi.com>
Acked-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jack Steiner [Thu, 2 Apr 2009 23:59:12 +0000 (16:59 -0700)]
sgi-gru: support multiple pagesizes in GRU
Add multiple pagesize support to the GRU driver.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jack Steiner [Thu, 2 Apr 2009 23:59:11 +0000 (16:59 -0700)]
sgi-gru: fix bugs related to module unload of the GRU driver
Fix bugs related to module unload of the GRU driver.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jack Steiner [Thu, 2 Apr 2009 23:59:10 +0000 (16:59 -0700)]
sgi-gru: macro for scanning all gru chiplets
Add macro for scanning all active GRU chiplets. Maximum chiplet id is
saved during GRU initialization.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jack Steiner [Thu, 2 Apr 2009 23:59:10 +0000 (16:59 -0700)]
sgi-gru: add support to the GRU driver for message queue interrupts
Add support to the GRU driver for message queue interrupts.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jack Steiner [Thu, 2 Apr 2009 23:59:09 +0000 (16:59 -0700)]
sgi-gru: restructure the GRU vtop functions
Restructure the GRU vtop functions in preparation for future changes.
This patch simply moves code around & does not change the algorithm.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jack Steiner [Thu, 2 Apr 2009 23:59:08 +0000 (16:59 -0700)]
sgi-gru: aSID (context management) bug fixes
This patch fixes bugs related to ASID (context id) management in the GRU
driver. These changes are all internal to the SGI GRU driver and have no
effect on the base kernel.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jack Steiner [Thu, 2 Apr 2009 23:59:07 +0000 (16:59 -0700)]
sgi-gru: add support for a user to explicitly unload a GRU context
Add support for a user to explicitly unload a GRU context.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jack Steiner [Thu, 2 Apr 2009 23:59:06 +0000 (16:59 -0700)]
sgi-gru: add statistics to the GRU context management functions
Add statistics to the GRU context management functions.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jack Steiner [Thu, 2 Apr 2009 23:59:06 +0000 (16:59 -0700)]
sgi-gru: change GRU CCH commands from inline functions to outofline functions
Change the GRU instructions that manage contexts from inline functions to
out-of-line functions. This simplifies adding statistics & error checking
to these functions.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jack Steiner [Thu, 2 Apr 2009 23:59:05 +0000 (16:59 -0700)]
sgi-gru: improvements to GRU debug messages & statistics
Improvements to GRU debug messages & statistics.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jack Steiner [Thu, 2 Apr 2009 23:59:04 +0000 (16:59 -0700)]
sgi-gru: misc GRU cleanup
Misc trivial GRU drivers fixes:
- fix long lines
- eliminate extra whitespace
- eliminate compiler warning
- better validation of invalidate user parameters
- bug fix for GRU TLB flush (not the cpu TLB flush)
These changes are all internal to the SGI GRU driver and have no effect
on the base kernel.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>