OSDN Git Service
Christian Ehrig [Fri, 7 Apr 2023 13:38:55 +0000 (15:38 +0200)]
selftests/bpf: Test FOU kfuncs for externally controlled ipip devices
Add tests for FOU and GUE encapsulation via the bpf_skb_{set,get}_fou_encap
kfuncs, using ipip devices in collect-metadata mode.
These tests make sure that we can successfully set and obtain FOU and GUE
encap parameters using ingress / egress BPF tc-hooks.
Signed-off-by: Christian Ehrig <cehrig@cloudflare.com>
Link: https://lore.kernel.org/r/040193566ddbdb0b53eb359f7ac7bbd316f338b5.1680874078.git.cehrig@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Christian Ehrig [Fri, 7 Apr 2023 13:38:54 +0000 (15:38 +0200)]
bpf,fou: Add bpf_skb_{set,get}_fou_encap kfuncs
Add two new kfuncs that allow a BPF tc-hook, installed on an ipip
device in collect-metadata mode, to control FOU encap parameters on a
per-packet level. The set of kfuncs is registered with the fou module.
The bpf_skb_set_fou_encap kfunc is supposed to be used in tandem and after
a successful call to the bpf_skb_set_tunnel_key bpf-helper. UDP source and
destination ports can be controlled by passing a struct bpf_fou_encap. A
source port of zero will auto-assign a source port. enum bpf_fou_encap_type
is used to specify if the egress path should FOU or GUE encap the packet.
On the ingress path bpf_skb_get_fou_encap can be used to read UDP source
and destination ports from the receiver's point of view and allows for
packet multiplexing across different destination ports within a single
BPF program and ipip device.
Signed-off-by: Christian Ehrig <cehrig@cloudflare.com>
Link: https://lore.kernel.org/r/e17c94a646b63e78ce0dbf3f04b2c33dc948a32d.1680874078.git.cehrig@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Christian Ehrig [Fri, 7 Apr 2023 13:38:53 +0000 (15:38 +0200)]
ipip,ip_tunnel,sit: Add FOU support for externally controlled ipip devices
Today ipip devices in collect-metadata mode don't allow for sending FOU
or GUE encapsulated packets. This patch lifts the restriction by adding
a struct ip_tunnel_encap to the tunnel metadata.
On the egress path, the members of this struct can be set by the
bpf_skb_set_fou_encap kfunc via a BPF tc-hook. Instead of dropping packets
wishing to use additional UDP encapsulation, ip_md_tunnel_xmit now
evaluates the contents of this struct and adds the corresponding FOU or
GUE header. Furthermore, it is making sure that additional header bytes
are taken into account for PMTU discovery.
On the ingress path, an ipip device in collect-metadata mode will fill this
struct and a BPF tc-hook can obtain the information via a call to the
bpf_skb_get_fou_encap kfunc.
The minor change to ip_tunnel_encap, which now takes a pointer to
struct ip_tunnel_encap instead of struct ip_tunnel, allows us to control
FOU encap type and parameters on a per packet-level.
Signed-off-by: Christian Ehrig <cehrig@cloudflare.com>
Link: https://lore.kernel.org/r/cfea47de655d0f870248abf725932f851b53960a.1680874078.git.cehrig@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Xin Liu [Thu, 6 Apr 2023 12:26:22 +0000 (20:26 +0800)]
bpf, sockmap: fix deadlocks in the sockhash and sockmap
When huang uses sched_switch tracepoint, the tracepoint
does only one thing in the mounted ebpf program, which
deletes the fixed elements in sockhash ([0])
It seems that elements in sockhash are rarely actively
deleted by users or ebpf program. Therefore, we do not
pay much attention to their deletion. Compared with hash
maps, sockhash only provides spin_lock_bh protection.
This causes it to appear to have self-locking behavior
in the interrupt context.
[0]:https://lore.kernel.org/all/CABcoxUayum5oOqFMMqAeWuS8+EzojquSOSyDA3J_2omY=2EeAg@mail.gmail.com/
Reported-by: Hsin-Wei Hung <hsinweih@uci.edu>
Fixes:
604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230406122622.109978-1-liuxin350@huawei.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
David Vernet [Tue, 11 Apr 2023 04:16:33 +0000 (23:16 -0500)]
bpf,docs: Remove references to bpf_cgroup_kptr_get()
The bpf_cgroup_kptr_get() kfunc has been removed, and
bpf_cgroup_acquire() / bpf_cgroup_release() now have the same semantics
as bpf_task_acquire() / bpf_task_release(). This patch updates the BPF
documentation to reflect this.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230411041633.179404-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
David Vernet [Tue, 11 Apr 2023 04:16:32 +0000 (23:16 -0500)]
bpf: Remove bpf_cgroup_kptr_get() kfunc
Now that bpf_cgroup_acquire() is KF_RCU | KF_RET_NULL,
bpf_cgroup_kptr_get() is redundant. Let's remove it, and update
selftests to instead use bpf_cgroup_acquire() where appropriate. The
next patch will update the BPF documentation to not mention
bpf_cgroup_kptr_get().
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230411041633.179404-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
David Vernet [Tue, 11 Apr 2023 04:16:31 +0000 (23:16 -0500)]
bpf: Make bpf_cgroup_acquire() KF_RCU | KF_RET_NULL
struct cgroup is already an RCU-safe type in the verifier. We can
therefore update bpf_cgroup_acquire() to be KF_RCU | KF_RET_NULL, and
subsequently remove bpf_cgroup_kptr_get(). This patch does the first of
these by updating bpf_cgroup_acquire() to be KF_RCU | KF_RET_NULL, and
also updates selftests accordingly.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230411041633.179404-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov [Wed, 12 Apr 2023 17:12:52 +0000 (10:12 -0700)]
bpf: Handle NULL in bpf_local_storage_free.
During OOM bpf_local_storage_alloc() may fail to allocate 'storage' and
call to bpf_local_storage_free() with NULL pointer will cause a crash like:
[ 271718.917646] BUG: kernel NULL pointer dereference, address:
00000000000000a0
[ 271719.019620] RIP: 0010:call_rcu+0x2d/0x240
[ 271719.216274] bpf_local_storage_alloc+0x19e/0x1e0
[ 271719.250121] bpf_local_storage_update+0x33b/0x740
Fixes:
7e30a8477b0b ("bpf: Add bpf_local_storage_free()")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230412171252.15635-1-alexei.starovoitov@gmail.com
Feng Zhou [Mon, 10 Apr 2023 08:59:08 +0000 (16:59 +0800)]
selftests/bpf: Add test to access u32 ptr argument in tracing program
Adding verifier test for accessing u32 pointer argument in
tracing programs.
The test program loads 1nd argument of bpf_fentry_test9 function
which is u32 pointer and checks that verifier allows that.
Co-developed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230410085908.98493-3-zhoufeng.zf@bytedance.com
Feng Zhou [Mon, 10 Apr 2023 08:59:07 +0000 (16:59 +0800)]
bpf/btf: Fix is_int_ptr()
When tracing a kernel function with arg type is u32*, btf_ctx_access()
would report error: arg2 type INT is not a struct.
The commit
bb6728d75611 ("bpf: Allow access to int pointer arguments
in tracing programs") added support for int pointer, but did not skip
modifiers before checking it's type. This patch fixes it.
Fixes:
bb6728d75611 ("bpf: Allow access to int pointer arguments in tracing programs")
Co-developed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230410085908.98493-2-zhoufeng.zf@bytedance.com
Daniel Borkmann [Tue, 11 Apr 2023 16:05:44 +0000 (18:05 +0200)]
Merge branch 'bpf-verifier-log-rotation'
Andrii Nakryiko says:
====================
This patch set changes BPF verifier log behavior to behave as a rotating log,
by default. If user-supplied log buffer is big enough to contain entire
verifier log output, there is no effective difference. But where previously
user supplied too small log buffer and would get -ENOSPC error result and the
beginning part of the verifier log, now there will be no error and user will
get ending part of verifier log filling up user-supplied log buffer. Which
is, in absolute majority of cases, is exactly what's useful, relevant, and
what users want and need, as the ending of the verifier log is containing
details of verifier failure and relevant state that got us to that failure.
So this rotating mode is made default, but for some niche advanced debugging
scenarios it's possible to request old behavior by specifying additional
BPF_LOG_FIXED (8) flag.
This patch set adjusts libbpf to allow specifying flags beyond 1 | 2 | 4. We
also add --log-size and --log-fixed options to veristat to be able to both
test this functionality manually, but also to be used in various debugging
scenarios. We also add selftests that tries many variants of log buffer size
to stress-test correctness of internal verifier log bookkeeping code.
Further, this patch set is merged with log_size_actual v1 patchset ([0]),
which adds ability to get required log buffer size to fit entire verifier
log output.
This addresses a long-standing limitation, which causes users and BPF loader
library writers to guess and pre-size log buffer, often allocating unnecessary
extra memory for this or doing extra program verifications just to size logs
better, ultimately wasting resources. This was requested most recently by Go
BPF library maintainers ([1]).
See respective patches for details. A bunch of them some drive-by fixes
detecting during working with the code. Some other further refactor and
compratmentalize verifier log handling code into kernel/bpf/log.c, which
should also make it simpler to integrate such verbose log for other
complicated bpf() syscall commands, if necessary. The rest are actual logic
to calculate maximum log buffer size needed and return it to user-space.
Few patches wire this on libbpf side, and the rest add selftests to test
proper log truncation and log_buf==NULL handling.
This turned into a pretty sizable patch set with lots of arithmetics, but
hopefully the set of features added to verifier log in this patch set are
both useful for BPF users and are self-contained and isolated enough to not
cause troubles going forward.
v3->v4:
- s/log_size_actual/log_true_size/ (Alexei);
- log_buf==NULL && log_size==0 don't trigger -ENOSPC (Lorenz);
- added WARN_ON_ONCE if we try bpf_vlog_reset() forward (Lorenz);
- added selftests for truncation in BPF_LOG_FIXED mode;
- fixed edge case in BPF_LOG_FIXED when log_size==1, leaving buf not zero
terminated;
v2->v3:
- typos and comment improvement (Lorenz);
- merged with log_size_actual v1 ([0]) patch set (Alexei);
- added log_buf==NULL condition allowed (Lorenz);
- added BPF_BTF_LOAD logs tests (Lorenz);
- more clean up and refactoring of internal verifier log API;
v1->v2:
- return -ENOSPC even in rotating log mode for preserving backwards
compatibility (Lorenz);
[0] https://patchwork.kernel.org/project/netdevbpf/list/?series=735213&state=*
[1] https://lore.kernel.org/bpf/CAN+4W8iNoEbQzQVbB_o1W0MWBDV4xCJAq7K3f6psVE-kkCfMqg@mail.gmail.com/
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Andrii Nakryiko [Thu, 6 Apr 2023 23:42:05 +0000 (16:42 -0700)]
selftests/bpf: Add verifier log tests for BPF_BTF_LOAD command
Add verifier log tests for BPF_BTF_LOAD command, which are very similar,
conceptually, to BPF_PROG_LOAD tests. These are two separate commands
dealing with verbose verifier log, so should be both tested separately.
Test that log_buf==NULL condition *does not* return -ENOSPC.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-20-andrii@kernel.org
Andrii Nakryiko [Thu, 6 Apr 2023 23:42:04 +0000 (16:42 -0700)]
selftests/bpf: Add testing of log_buf==NULL condition for BPF_PROG_LOAD
Add few extra test conditions to validate that it's ok to pass
log_buf==NULL and log_size==0 to BPF_PROG_LOAD command with the intent
to get log_true_size without providing a buffer.
Test that log_buf==NULL condition *does not* return -ENOSPC.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-19-andrii@kernel.org
Andrii Nakryiko [Thu, 6 Apr 2023 23:42:03 +0000 (16:42 -0700)]
selftests/bpf: Add tests to validate log_true_size feature
Add additional test cases validating that log_true_size is consistent
between fixed and rotating log modes, and that log_true_size can be
used *exactly* without causing -ENOSPC, while using just 1 byte shorter
log buffer would cause -ENOSPC.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-18-andrii@kernel.org
Andrii Nakryiko [Thu, 6 Apr 2023 23:42:02 +0000 (16:42 -0700)]
libbpf: Wire through log_true_size for bpf_btf_load() API
Similar to what we did for bpf_prog_load() in previous patch, wire
returning of log_true_size value from kernel back to the user through
OPTS out field.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230406234205.323208-17-andrii@kernel.org
Andrii Nakryiko [Thu, 6 Apr 2023 23:42:01 +0000 (16:42 -0700)]
libbpf: Wire through log_true_size returned from kernel for BPF_PROG_LOAD
Add output-only log_true_size field to bpf_prog_load_opts to return
bpf_attr->log_true_size value back from bpf() syscall.
Note, that we have to drop const modifier from opts in bpf_prog_load().
This could potentially cause compilation error for some users. But
the usual practice is to define bpf_prog_load_ops
as a local variable next to bpf_prog_load() call and pass pointer to it,
so const vs non-const makes no difference and won't even come up in most
(if not all) cases.
There are no runtime and ABI backwards/forward compatibility issues at all.
If user provides old struct bpf_prog_load_opts, libbpf won't set new
fields. If old libbpf is provided new bpf_prog_load_opts, nothing will
happen either as old libbpf doesn't yet know about this new field.
Adding a new variant of bpf_prog_load() just for this seems like a big
and unnecessary overkill. As a corroborating evidence is the fact that
entire selftests/bpf code base required not adjustment whatsoever.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230406234205.323208-16-andrii@kernel.org
Andrii Nakryiko [Thu, 6 Apr 2023 23:42:00 +0000 (16:42 -0700)]
bpf: Relax log_buf NULL conditions when log_level>0 is requested
Drop the log_size>0 and log_buf!=NULL condition when log_level>0. This
allows users to request log_true_size of a full log without providing
actual (even if small) log buffer. Verifier log handling code was mostly
ready to handle NULL log->ubuf, so only few small changes were necessary
to prevent NULL log->ubuf from causing problems.
Note, that if user provided NULL log_buf with log_level>0 we don't
consider this a log truncation, and thus won't return -ENOSPC.
We also enforce that either (log_buf==NULL && log_size==0) or
(log_buf!=NULL && log_size>0).
Suggested-by: Lorenz Bauer <lmb@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-15-andrii@kernel.org
Andrii Nakryiko [Thu, 6 Apr 2023 23:41:59 +0000 (16:41 -0700)]
bpf: Simplify internal verifier log interface
Simplify internal verifier log API down to bpf_vlog_init() and
bpf_vlog_finalize(). The former handles input arguments validation in
one place and makes it easier to change it. The latter subsumes -ENOSPC
(truncation) and -EFAULT handling and simplifies both caller's code
(bpf_check() and btf_parse()).
For btf_parse(), this patch also makes sure that verifier log
finalization happens even if there is some error condition during BTF
verification process prior to normal finalization step.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-14-andrii@kernel.org
Andrii Nakryiko [Thu, 6 Apr 2023 23:41:58 +0000 (16:41 -0700)]
bpf: Add log_true_size output field to return necessary log buffer size
Add output-only log_true_size and btf_log_true_size field to
BPF_PROG_LOAD and BPF_BTF_LOAD commands, respectively. It will return
the size of log buffer necessary to fit in all the log contents at
specified log_level. This is very useful for BPF loader libraries like
libbpf to be able to size log buffer correctly, but could be used by
users directly, if necessary, as well.
This patch plumbs all this through the code, taking into account actual
bpf_attr size provided by user to determine if these new fields are
expected by users. And if they are, set them from kernel on return.
We refactory btf_parse() function to accommodate this, moving attr and
uattr handling inside it. The rest is very straightforward code, which
is split from the logging accounting changes in the previous patch to
make it simpler to review logic vs UAPI changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-13-andrii@kernel.org
Andrii Nakryiko [Thu, 6 Apr 2023 23:41:57 +0000 (16:41 -0700)]
bpf: Keep track of total log content size in both fixed and rolling modes
Change how we do accounting in BPF_LOG_FIXED mode and adopt log->end_pos
as *logical* log position. This means that we can go beyond physical log
buffer size now and be able to tell what log buffer size should be to
fit entire log contents without -ENOSPC.
To do this for BPF_LOG_FIXED mode, we need to remove a short-circuiting
logic of not vsnprintf()'ing further log content once we filled up
user-provided buffer, which is done by bpf_verifier_log_needed() checks.
We modify these checks to always keep going if log->level is non-zero
(i.e., log is requested), even if log->ubuf was NULL'ed out due to
copying data to user-space, or if entire log buffer is physically full.
We adopt bpf_verifier_vlog() routine to work correctly with
log->ubuf == NULL condition, performing log formatting into temporary
kernel buffer, doing all the necessary accounting, but just avoiding
copying data out if buffer is full or NULL'ed out.
With these changes, it's now possible to do this sort of determination of
log contents size in both BPF_LOG_FIXED and default rolling log mode.
We need to keep in mind bpf_vlog_reset(), though, which shrinks log
contents after successful verification of a particular code path. This
log reset means that log->end_pos isn't always increasing, so to return
back to users what should be the log buffer size to fit all log content
without causing -ENOSPC even in the presence of log resetting, we need
to keep maximum over "lifetime" of logging. We do this accounting in
bpf_vlog_update_len_max() helper.
A related and subtle aspect is that with this logical log->end_pos even in
BPF_LOG_FIXED mode we could temporary "overflow" buffer, but then reset
it back with bpf_vlog_reset() to a position inside user-supplied
log_buf. In such situation we still want to properly maintain
terminating zero. We will eventually return -ENOSPC even if final log
buffer is small (we detect this through log->len_max check). This
behavior is simpler to reason about and is consistent with current
behavior of verifier log. Handling of this required a small addition to
bpf_vlog_reset() logic to avoid doing put_user() beyond physical log
buffer dimensions.
Another issue to keep in mind is that we limit log buffer size to 32-bit
value and keep such log length as u32, but theoretically verifier could
produce huge log stretching beyond 4GB. Instead of keeping (and later
returning) 64-bit log length, we cap it at UINT_MAX. Current UAPI makes
it impossible to specify log buffer size bigger than 4GB anyways, so we
don't really loose anything here and keep everything consistently 32-bit
in UAPI. This property will be utilized in next patch.
Doing the same determination of maximum log buffer for rolling mode is
trivial, as log->end_pos and log->start_pos are already logical
positions, so there is nothing new there.
These changes do incidentally fix one small issue with previous logging
logic. Previously, if use provided log buffer of size N, and actual log
output was exactly N-1 bytes + terminating \0, kernel logic coun't
distinguish this condition from log truncation scenario which would end
up with truncated log contents of N-1 bytes + terminating \0 as well.
But now with log->end_pos being logical position that could go beyond
actual log buffer size, we can distinguish these two conditions, which
we do in this patch. This plays nicely with returning log_size_actual
(implemented in UAPI in the next patch), as we can now guarantee that if
user takes such log_size_actual and provides log buffer of that exact
size, they will not get -ENOSPC in return.
All in all, all these changes do conceptually unify fixed and rolling
log modes much better, and allow a nice feature requested by users:
knowing what should be the size of the buffer to avoid -ENOSPC.
We'll plumb this through the UAPI and the code in the next patch.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-12-andrii@kernel.org
Andrii Nakryiko [Thu, 6 Apr 2023 23:41:56 +0000 (16:41 -0700)]
bpf: Simplify logging-related error conditions handling
Move log->level == 0 check into bpf_vlog_truncated() instead of doing it
explicitly. Also remove unnecessary goto in kernel/bpf/verifier.c.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-11-andrii@kernel.org
Andrii Nakryiko [Thu, 6 Apr 2023 23:41:55 +0000 (16:41 -0700)]
bpf: Avoid incorrect -EFAULT error in BPF_LOG_KERNEL mode
If verifier log is in BPF_LOG_KERNEL mode, no log->ubuf is expected and
it stays NULL throughout entire verification process. Don't erroneously
return -EFAULT in such case.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-10-andrii@kernel.org
Andrii Nakryiko [Thu, 6 Apr 2023 23:41:54 +0000 (16:41 -0700)]
bpf: Fix missing -EFAULT return on user log buf error in btf_parse()
btf_parse() is missing -EFAULT error return if log->ubuf was NULL-ed out
due to error while copying data into user-provided buffer. Add it, but
handle a special case of BPF_LOG_KERNEL in which log->ubuf is always NULL.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-9-andrii@kernel.org
Andrii Nakryiko [Thu, 6 Apr 2023 23:41:53 +0000 (16:41 -0700)]
bpf: Ignore verifier log reset in BPF_LOG_KERNEL mode
Verifier log position reset is meaningless in BPF_LOG_KERNEL mode, so
just exit early in bpf_vlog_reset() if log->level is BPF_LOG_KERNEL.
This avoid meaningless put_user() into NULL log->ubuf.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-8-andrii@kernel.org
Andrii Nakryiko [Thu, 6 Apr 2023 23:41:52 +0000 (16:41 -0700)]
selftests/bpf: Add fixed vs rotating verifier log tests
Add selftests validating BPF_LOG_FIXED behavior, which used to be the
only behavior, and now default rotating BPF verifier log, which returns
just up to last N bytes of full verifier log, instead of returning
-ENOSPC.
To stress test correctness of in-kernel verifier log logic, we force it
to truncate program's verifier log to all lengths from 1 all the way to
its full size (about 450 bytes today). This was a useful stress test
while developing the feature.
For both fixed and rotating log modes we expect -ENOSPC if log contents
doesn't fit in user-supplied log buffer.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-7-andrii@kernel.org
Andrii Nakryiko [Thu, 6 Apr 2023 23:41:51 +0000 (16:41 -0700)]
veristat: Add more veristat control over verifier log options
Add --log-size to be able to customize log buffer sent to bpf() syscall
for BPF program verification logging.
Add --log-fixed to enforce BPF_LOG_FIXED behavior for BPF verifier log.
This is useful in unlikely event that beginning of truncated verifier
log is more important than the end of it (which with rotating verifier
log behavior is the default now).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230406234205.323208-6-andrii@kernel.org
Andrii Nakryiko [Thu, 6 Apr 2023 23:41:50 +0000 (16:41 -0700)]
libbpf: Don't enforce unnecessary verifier log restrictions on libbpf side
This basically prevents any forward compatibility. And we either way
just return -EINVAL, which would otherwise be returned from bpf()
syscall anyways.
Similarly, drop enforcement of non-NULL log_buf when log_level > 0. This
won't be true anymore soon.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-5-andrii@kernel.org
Andrii Nakryiko [Thu, 6 Apr 2023 23:41:49 +0000 (16:41 -0700)]
bpf: Switch BPF verifier log to be a rotating log by default
Currently, if user-supplied log buffer to collect BPF verifier log turns
out to be too small to contain full log, bpf() syscall returns -ENOSPC,
fails BPF program verification/load, and preserves first N-1 bytes of
the verifier log (where N is the size of user-supplied buffer).
This is problematic in a bunch of common scenarios, especially when
working with real-world BPF programs that tend to be pretty complex as
far as verification goes and require big log buffers. Typically, it's
when debugging tricky cases at log level 2 (verbose). Also, when BPF program
is successfully validated, log level 2 is the only way to actually see
verifier state progression and all the important details.
Even with log level 1, it's possible to get -ENOSPC even if the final
verifier log fits in log buffer, if there is a code path that's deep
enough to fill up entire log, even if normally it would be reset later
on (there is a logic to chop off successfully validated portions of BPF
verifier log).
In short, it's not always possible to pre-size log buffer. Also, what's
worse, in practice, the end of the log most often is way more important
than the beginning, but verifier stops emitting log as soon as initial
log buffer is filled up.
This patch switches BPF verifier log behavior to effectively behave as
rotating log. That is, if user-supplied log buffer turns out to be too
short, verifier will keep overwriting previously written log,
effectively treating user's log buffer as a ring buffer. -ENOSPC is
still going to be returned at the end, to notify user that log contents
was truncated, but the important last N bytes of the log would be
returned, which might be all that user really needs. This consistent
-ENOSPC behavior, regardless of rotating or fixed log behavior, allows
to prevent backwards compatibility breakage. The only user-visible
change is which portion of verifier log user ends up seeing *if buffer
is too small*. Given contents of verifier log itself is not an ABI,
there is no breakage due to this behavior change. Specialized tools that
rely on specific contents of verifier log in -ENOSPC scenario are
expected to be easily adapted to accommodate old and new behaviors.
Importantly, though, to preserve good user experience and not require
every user-space application to adopt to this new behavior, before
exiting to user-space verifier will rotate log (in place) to make it
start at the very beginning of user buffer as a continuous
zero-terminated string. The contents will be a chopped off N-1 last
bytes of full verifier log, of course.
Given beginning of log is sometimes important as well, we add
BPF_LOG_FIXED (which equals 8) flag to force old behavior, which allows
tools like veristat to request first part of verifier log, if necessary.
BPF_LOG_FIXED flag is also a simple and straightforward way to check if
BPF verifier supports rotating behavior.
On the implementation side, conceptually, it's all simple. We maintain
64-bit logical start and end positions. If we need to truncate the log,
start position will be adjusted accordingly to lag end position by
N bytes. We then use those logical positions to calculate their matching
actual positions in user buffer and handle wrap around the end of the
buffer properly. Finally, right before returning from bpf_check(), we
rotate user log buffer contents in-place as necessary, to make log
contents contiguous. See comments in relevant functions for details.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-4-andrii@kernel.org
Andrii Nakryiko [Thu, 6 Apr 2023 23:41:48 +0000 (16:41 -0700)]
bpf: Remove minimum size restrictions on verifier log buffer
It's not clear why we have 128 as minimum size, but it makes testing
harder and seems unnecessary, as we carefully handle truncation
scenarios and use proper snprintf variants. So remove this limitation
and just enforce positive length for log buffer.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-3-andrii@kernel.org
Andrii Nakryiko [Thu, 6 Apr 2023 23:41:47 +0000 (16:41 -0700)]
bpf: Split off basic BPF verifier log into separate file
kernel/bpf/verifier.c file is large and growing larger all the time. So
it's good to start splitting off more or less self-contained parts into
separate files to keep source code size (somewhat) somewhat under
control.
This patch is a one step in this direction, moving some of BPF verifier log
routines into a separate kernel/bpf/log.c. Right now it's most low-level
and isolated routines to append data to log, reset log to previous
position, etc. Eventually we could probably move verifier state
printing logic here as well, but this patch doesn't attempt to do that
yet.
Subsequent patches will add more logic to verifier log management, so
having basics in a separate file will make sure verifier.c doesn't grow
more with new changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-2-andrii@kernel.org
Alejandro Colomar [Tue, 11 Apr 2023 14:47:47 +0000 (15:47 +0100)]
bpf: Remove extra whitespace in SPDX tag for syscall/helpers man pages
There is an extra whitespace in the SPDX tag, before the license name,
in the script for generating man pages for the bpf() syscall and the
helpers. It has caused problems in Debian packaging, in the tool that
autodetects licenses. Let's clean it up.
Fixes:
5cb62b7598f2 ("bpf, docs: Use SPDX license identifier in bpf_doc.py")
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230411144747.66734-1-quentin@isovalent.com
Manu Bretelle [Sat, 8 Apr 2023 02:29:19 +0000 (19:29 -0700)]
selftests/bpf: Reset err when symbol name already exist in kprobe_multi_test
When trying to add a name to the hashmap, an error code of EEXIST is
returned and we continue as names are possibly duplicated in the sys
file.
If the last name in the file is a duplicate, we will continue to the
next iteration of the while loop, and exit the loop with a value of err
set to EEXIST and enter the error label with err set, which causes the
test to fail when it should not.
This change reset err to 0 before continue-ing into the next iteration,
this way, if there is no more data to read from the file we iterate
through, err will be set to 0.
Behaviour prior to this change:
```
test_kprobe_multi_bench_attach:FAIL:get_syms unexpected error: -17
(errno 2)
All error logs:
test_kprobe_multi_bench_attach:FAIL:get_syms unexpected error: -17
(errno 2)
Summary: 0/1 PASSED, 0 SKIPPED, 1 FAILED
```
After this change:
```
Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED
```
Signed-off-by: Manu Bretelle <chantr4@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230408022919.54601-1-chantr4@gmail.com
Eduard Zingerman [Fri, 7 Apr 2023 15:41:25 +0000 (18:41 +0300)]
selftests/bpf: Prevent infinite loop in veristat when base file is too short
The following example forces veristat to loop indefinitely:
$ cat two-ok
file_name,prog_name,verdict,total_states
file-a,a,success,12
file-b,b,success,67
$ cat add-failure
file_name,prog_name,verdict,total_states
file-a,a,success,12
file-b,b,success,67
file-b,c,failure,32
$ veristat -C two-ok add-failure
<does not return>
The loop is caused by handle_comparison_mode() not checking if `base`
variable points to `fallback_stats` prior advancing joined results
using `base`.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230407154125.896927-1-eddyz87@gmail.com
Wei Yongjun [Fri, 7 Apr 2023 08:14:26 +0000 (08:14 +0000)]
bpftool: Set program type only if it differs from the desired one
After commit
d6e6286a12e7 ("libbpf: disassociate section handler on explicit
bpf_program__set_type() call"), bpf_program__set_type() will force cleanup
the program's SEC() definition, this commit fixed the test helper but missed
the bpftool, which leads to bpftool prog autoattach broken as follows:
$ bpftool prog load spi-xfer-r1v1.o /sys/fs/bpf/test autoattach
Program spi_xfer_r1v1 does not support autoattach, falling back to pinning
This patch fix bpftool to set program type only if it differs.
Fixes:
d6e6286a12e7 ("libbpf: disassociate section handler on explicit bpf_program__set_type() call")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230407081427.2621590-1-weiyongjun@huaweicloud.com
Song Liu [Fri, 7 Apr 2023 19:01:30 +0000 (12:01 -0700)]
selftests/bpf: Use PERF_COUNT_HW_CPU_CYCLES event for get_branch_snapshot
perf_event with type=PERF_TYPE_RAW and config=0x1b00 turned out to be not
reliable in ensuring LBR is active. Thus, test_progs:get_branch_snapshot is
not reliable in some systems. Replace it with PERF_COUNT_HW_CPU_CYCLES
event, which gives more consistent results.
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230407190130.2093736-1-song@kernel.org
Barret Rhoden [Fri, 7 Apr 2023 00:18:08 +0000 (20:18 -0400)]
bpf: ensure all memory is initialized in bpf_get_current_comm
BPF helpers that take an ARG_PTR_TO_UNINIT_MEM must ensure that all of
the memory is set, including beyond the end of the string.
Signed-off-by: Barret Rhoden <brho@google.com>
Link: https://lore.kernel.org/r/20230407001808.1622968-1-brho@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov [Thu, 6 Apr 2023 22:26:08 +0000 (15:26 -0700)]
Merge branch 'bpf: Improve verifier for cond_op and spilled loop index variables'
Yonghong Song says:
====================
LLVM commit [1] introduced hoistMinMax optimization like
(i < VIRTIO_MAX_SGS) && (i < out_sgs)
to
upper = MIN(VIRTIO_MAX_SGS, out_sgs)
... i < upper ...
and caused the verification failure. Commit [2] workarounded the issue by
adding some bpf assembly code to prohibit the above optimization.
This patch improved verifier such that verification can succeed without
the above workaround.
Without [2], the current verifier will hit the following failures:
...
119: (15) if r1 == 0x0 goto pc+1
The sequence of 8193 jumps is too complex.
verification time 525829 usec
stack depth 64
processed 156616 insns (limit
1000000) max_states_per_insn 8 total_states 1754 peak_states 1712 mark_read 12
-- END PROG LOAD LOG --
libbpf: prog 'trace_virtqueue_add_sgs': failed to load: -14
libbpf: failed to load object 'loop6.bpf.o'
...
The failure is due to verifier inadequately handling '<const> <cond_op> <non_const>' which will
go through both pathes and generate the following verificaiton states:
...
89: (07) r2 += 1 ; R2_w=5
90: (79) r8 = *(u64 *)(r10 -48) ; R8_w=scalar() R10=fp0
91: (79) r1 = *(u64 *)(r10 -56) ; R1_w=scalar(umax=5,var_off=(0x0; 0x7)) R10=fp0
92: (ad) if r2 < r1 goto pc+41 ; R0_w=scalar() R1_w=scalar(umin=6,umax=5,var_off=(0x4; 0x3))
R2_w=5 R6_w=scalar(id=385) R7_w=0 R8_w=scalar() R9_w=scalar(umax=
21474836475,var_off=(0x0; 0x7ffffffff))
R10=fp0 fp-8=mmmmmmmm fp-16=mmmmmmmm fp-24=mmmm???? fp-32= fp-40_w=4 fp-48=mmmmmmmm fp-56= fp-64=mmmmmmmm
...
89: (07) r2 += 1 ; R2_w=6
90: (79) r8 = *(u64 *)(r10 -48) ; R8_w=scalar() R10=fp0
91: (79) r1 = *(u64 *)(r10 -56) ; R1_w=scalar(umax=5,var_off=(0x0; 0x7)) R10=fp0
92: (ad) if r2 < r1 goto pc+41 ; R0_w=scalar() R1_w=scalar(umin=7,umax=5,var_off=(0x4; 0x3))
R2_w=6 R6=scalar(id=388) R7=0 R8_w=scalar() R9_w=scalar(umax=
25769803770,var_off=(0x0; 0x7ffffffff))
R10=fp0 fp-8=mmmmmmmm fp-16=mmmmmmmm fp-24=mmmm???? fp-32= fp-40=5 fp-48=mmmmmmmm fp-56= fp-64=mmmmmmmm
...
89: (07) r2 += 1 ; R2_w=4088
90: (79) r8 = *(u64 *)(r10 -48) ; R8_w=scalar() R10=fp0
91: (79) r1 = *(u64 *)(r10 -56) ; R1_w=scalar(umax=5,var_off=(0x0; 0x7)) R10=fp0
92: (ad) if r2 < r1 goto pc+41 ; R0=scalar() R1=scalar(umin=4089,umax=5,var_off=(0x0; 0x7))
R2=4088 R6=scalar(id=12634) R7=0 R8=scalar() R9=scalar(umax=
17557826301960,var_off=(0x0; 0xfffffffffff))
R10=fp0 fp-8=mmmmmmmm fp-16=mmmmmmmm fp-24=mmmm???? fp-32= fp-40=4087 fp-48=mmmmmmmm fp-56= fp-64=mmmmmmmm
Patch 3 fixed the above issue by handling '<const> <cond_op> <non_const>' properly.
During developing selftests for Patch 3, I found some issues with bound deduction with
BPF_EQ/BPF_NE and fixed the issue in Patch 1.
After the above issue is fixed, the second issue shows up.
...
67: (07) r1 += -16 ; R1_w=fp-16
; bpf_probe_read_kernel(&sgp, sizeof(sgp), sgs + i);
68: (b4) w2 = 8 ; R2_w=8
69: (85) call bpf_probe_read_kernel#113 ; R0_w=scalar() fp-16=mmmmmmmm
; return sgp;
70: (79) r6 = *(u64 *)(r10 -16) ; R6=scalar() R10=fp0
; for (n = 0, sgp = get_sgp(sgs, i); sgp && (n < SG_MAX);
71: (15) if r6 == 0x0 goto pc-49 ; R6=scalar()
72: (b4) w1 = 0 ; R1_w=0
73: (05) goto pc-46
; for (i = 0; (i < VIRTIO_MAX_SGS) && (i < out_sgs); i++) {
28: (bc) w7 = w1 ; R1_w=0 R7_w=0
; bpf_probe_read_kernel(&len, sizeof(len), &sgp->length);
...
23: (79) r3 = *(u64 *)(r10 -40) ; R3_w=2 R10=fp0
; for (i = 0; (i < VIRTIO_MAX_SGS) && (i < out_sgs); i++) {
24: (07) r3 += 1 ; R3_w=3
; for (i = 0; (i < VIRTIO_MAX_SGS) && (i < out_sgs); i++) {
25: (79) r1 = *(u64 *)(r10 -56) ; R1_w=scalar(umax=5,var_off=(0x0; 0x7)) R10=fp0
26: (ad) if r3 < r1 goto pc+34 61: R0=scalar() R1_w=scalar(umin=4,umax=5,var_off=(0x4; 0x1)) R3_w=3 R6=scalar(id=1658)
R7=0 R8=scalar(id=1653) R9=scalar(umax=
4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 fp-8=mmmmmmmm fp-16=mmmmmmmm
fp-24=mmmm???? fp-32= fp-40=2 fp-56= fp-64=mmmmmmmm
; if (sg_is_chain(&sg))
61: (7b) *(u64 *)(r10 -40) = r3 ; R3_w=3 R10=fp0 fp-40_w=3
...
67: (07) r1 += -16 ; R1_w=fp-16
; bpf_probe_read_kernel(&sgp, sizeof(sgp), sgs + i);
68: (b4) w2 = 8 ; R2_w=8
69: (85) call bpf_probe_read_kernel#113 ; R0_w=scalar() fp-16=mmmmmmmm
; return sgp;
70: (79) r6 = *(u64 *)(r10 -16)
; for (n = 0, sgp = get_sgp(sgs, i); sgp && (n < SG_MAX);
infinite loop detected at insn 71
verification time 90800 usec
stack depth 64
processed 25017 insns (limit
1000000) max_states_per_insn 20 total_states 491 peak_states 169 mark_read 12
-- END PROG LOAD LOG --
libbpf: prog 'trace_virtqueue_add_sgs': failed to load: -22
Further analysis found the index variable 'i' is spilled but since it is not marked as precise.
This is more tricky as identifying induction variable is not easy in verifier. Although a heuristic
is possible, let us leave it for now.
[1] https://reviews.llvm.org/
D143726
[2] Commit
3c2611bac08a ("selftests/bpf: Fix trace_virtqueue_add_sgs test issue with LLVM 17.")
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Yonghong Song [Thu, 6 Apr 2023 16:45:10 +0000 (09:45 -0700)]
selftests/bpf: Add verifier tests for code pattern '<const> <cond_op> <non_const>'
Add various tests for code pattern '<const> <cond_op> <non_const>' to
exercise the previous verifier patch.
The following are veristat changed number of processed insns stat
comparing the previous patch vs. this patch:
File Program Insns (A) Insns (B) Insns (DIFF)
----------------------------------------------------- ---------------------------------------------------- --------- --------- -------------
test_seg6_loop.bpf.linked3.o __add_egr_x 12423 12314 -109 (-0.88%)
Only one program is affected with minor change.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230406164510.1047757-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Yonghong Song [Thu, 6 Apr 2023 16:45:05 +0000 (09:45 -0700)]
bpf: Improve handling of pattern '<const> <cond_op> <non_const>' in verifier
Currently, the verifier does not handle '<const> <cond_op> <non_const>' well.
For example,
...
10: (79) r1 = *(u64 *)(r10 -16) ; R1_w=scalar() R10=fp0
11: (b7) r2 = 0 ; R2_w=0
12: (2d) if r2 > r1 goto pc+2
13: (b7) r0 = 0
14: (95) exit
15: (65) if r1 s> 0x1 goto pc+3
16: (0f) r0 += r1
...
At insn 12, verifier decides both true and false branch are possible, but
actually only false branch is possible.
Currently, the verifier already supports patterns '<non_const> <cond_op> <const>.
Add support for patterns '<const> <cond_op> <non_const>' in a similar way.
Also fix selftest 'verifier_bounds_mix_sign_unsign/bounds checks mixing signed and unsigned, variant 10'
due to this change.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230406164505.1046801-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Yonghong Song [Thu, 6 Apr 2023 16:45:00 +0000 (09:45 -0700)]
selftests/bpf: Add tests for non-constant cond_op NE/EQ bound deduction
Add various tests for code pattern '<non-const> NE/EQ <const>' implemented
in the previous verifier patch. Without the verifier patch, these new
tests will fail.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230406164500.1045715-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Yonghong Song [Thu, 6 Apr 2023 16:44:55 +0000 (09:44 -0700)]
bpf: Improve verifier JEQ/JNE insn branch taken checking
Currently, for BPF_JEQ/BPF_JNE insn, verifier determines
whether the branch is taken or not only if both operands
are constants. Therefore, for the following code snippet,
0: (85) call bpf_ktime_get_ns#5 ; R0_w=scalar()
1: (a5) if r0 < 0x3 goto pc+2 ; R0_w=scalar(umin=3)
2: (b7) r2 = 2 ; R2_w=2
3: (1d) if r0 == r2 goto pc+2 6
At insn 3, since r0 is not a constant, verifier assumes both branch
can be taken which may lead inproper verification failure.
Add comparing umin/umax value and the constant. If the umin value
is greater than the constant, or umax value is smaller than the constant,
for JEQ the branch must be not-taken, and for JNE the branch must be taken.
The jmp32 mode JEQ/JNE branch taken checking is also handled similarly.
The following lists the veristat result w.r.t. changed number
of processes insns during verification:
File Program Insns (A) Insns (B) Insns (DIFF)
----------------------------------------------------- ---------------------------------------------------- --------- --------- ---------------
test_cls_redirect.bpf.linked3.o cls_redirect 64980 73472 +8492 (+13.07%)
test_seg6_loop.bpf.linked3.o __add_egr_x 12425 12423 -2 (-0.02%)
test_tcp_hdr_options.bpf.linked3.o estab 2634 2558 -76 (-2.89%)
test_parse_tcp_hdr_opt.bpf.linked3.o xdp_ingress_v6 1421 1420 -1 (-0.07%)
test_parse_tcp_hdr_opt_dynptr.bpf.linked3.o xdp_ingress_v6 1238 1237 -1 (-0.08%)
test_tc_dtime.bpf.linked3.o egress_fwdns_prio100 414 411 -3 (-0.72%)
Mostly a small improvement but test_cls_redirect.bpf.linked3.o has a 13% regression.
I checked with verifier log and found it this is due to pruning.
For some JEQ/JNE branches impacted by this patch,
one branch is explored and the other has state equivalence and
pruned.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230406164455.1045294-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martin KaFai Lau [Thu, 6 Apr 2023 16:53:05 +0000 (09:53 -0700)]
Merge branch 'xsk: Fix unaligned descriptor validation'
Kal Conley says:
====================
This patchset includes the test with the bugfix as requested here:
https://lore.kernel.org/all/
f1a32d5a-03e7-fce1-f5a5-
6095f365f0a9@linux.dev/
Patch #1 (the bugfix) is identical to the previous submission except
that I improved the commit message slightly.
Magnus: I improved the test code a little different than you asked
since I thought this was a little simpler than having a separate
function for now. Hopefully, you can live with this :-).
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Kal Conley [Wed, 5 Apr 2023 23:59:19 +0000 (01:59 +0200)]
selftests: xsk: Add test UNALIGNED_INV_DESC_4K1_FRAME_SIZE
Add unaligned descriptor test for frame size of 4001. Using an odd frame
size ensures that the end of the UMEM is not near a page boundary. This
allows testing descriptors that staddle the end of the UMEM but not a
page.
This test used to fail without the previous commit ("xsk: Fix unaligned
descriptor validation").
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Link: https://lore.kernel.org/r/20230405235920.7305-3-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Kal Conley [Wed, 5 Apr 2023 23:59:18 +0000 (01:59 +0200)]
xsk: Fix unaligned descriptor validation
Make sure unaligned descriptors that straddle the end of the UMEM are
considered invalid. Currently, descriptor validation is broken for
zero-copy mode which only checks descriptors at page granularity.
For example, descriptors in zero-copy mode that overrun the end of the
UMEM but not a page boundary are (incorrectly) considered valid. The
UMEM boundary check needs to happen before the page boundary and
contiguity checks in xp_desc_crosses_non_contig_pg(). Do this check in
xp_unaligned_validate_desc() instead like xp_check_unaligned() already
does.
Fixes:
2b43470add8c ("xsk: Introduce AF_XDP buffer allocation API")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230405235920.7305-2-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Viktor Malik [Thu, 30 Mar 2023 10:20:01 +0000 (12:20 +0200)]
kallsyms: move module-related functions under correct configs
Functions for searching module kallsyms should have non-empty
definitions only if CONFIG_MODULES=y and CONFIG_KALLSYMS=y. Until now,
only CONFIG_MODULES check was used for many of these, which may have
caused complilation errors on some configs.
This patch moves all relevant functions under the correct configs.
Fixes:
bd5314f8dd2d ("kallsyms, bpf: Move find_kallsyms_symbol_value out of internal header")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303181535.RFDCnz3E-lkp@intel.com/
Link: https://lore.kernel.org/r/20230330102001.2183693-1-vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov [Thu, 6 Apr 2023 04:27:27 +0000 (21:27 -0700)]
Merge branch 'bpftool: Add inline annotations when dumping program CFGs'
Quentin Monnet says:
====================
This set contains some improvements for bpftool's "visual" program dump
option, which produces the control flow graph in a DOT format. The main
objective is to add support for inline annotations on such graphs, so that
we can have the C source code for the program showing up alongside the
instructions, when available. The last commits also make it possible to
display the line numbers or the bare opcodes in the graph, as supported by
regular program dumps.
v3:
- Fixed formatting of DOT graph: escape spaces, and remove indent that
would cause some unwanted spaces to show up in the resulting graph.
- Don't print line information if the record is empty.
- Add '<' and ' ' to the list of escaped characters for generting the
DOT graph.
- Truncate long file paths, use shorter field names ("line", "col") for
code location information in the graph, add missing separator space.
- Add a commit to return an error if JSON output and CFG are both
required.
- Add a drive-by, clean up commit for bash completion (avoid unnecessary
calls to _bpftool_once_attr()).
v2: Replace fputc(..., stdout) with putchar(...) in dotlabel_puts().
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Quentin Monnet [Wed, 5 Apr 2023 13:21:20 +0000 (14:21 +0100)]
bpftool: Clean up _bpftool_once_attr() calls in bash completion
In bpftool's bash completion file, function _bpftool_once_attr() is able
to process multiple arguments. There are a few locations where this
function is called multiple times in a row, each time for a single
argument; let's pass all arguments instead to minimize the number of
function calls required for the completion.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-8-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Quentin Monnet [Wed, 5 Apr 2023 13:21:19 +0000 (14:21 +0100)]
bpftool: Support printing opcodes and source file references in CFG
Add support for displaying opcodes or/and file references (filepath,
line and column numbers) when dumping the control flow graphs of loaded
BPF programs with bpftool.
The filepaths in the records are absolute. To avoid blocks on the graph
to get too wide, we truncate them when they get too long (but we always
keep the entire file name). In the unlikely case where the resulting
file name is ambiguous, it remains possible to get the full path with a
regular dump (no CFG).
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-7-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Quentin Monnet [Wed, 5 Apr 2023 13:21:18 +0000 (14:21 +0100)]
bpftool: Support "opcodes", "linum", "visual" simultaneously
When dumping a program, the keywords "opcodes" (for printing the raw
opcodes), "linum" (for displaying the filename, line number, column
number along with the source code), and "visual" (for generating the
control flow graph for translated programs) are mutually exclusive. But
there's no reason why they should be. Let's make it possible to pass
several of them at once. The "file FILE" option, which makes bpftool
output a binary image to a file, remains incompatible with the others.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-6-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Quentin Monnet [Wed, 5 Apr 2023 13:21:17 +0000 (14:21 +0100)]
bpftool: Return an error on prog dumps if both CFG and JSON are required
We do not support JSON output for control flow graphs of programs with
bpftool. So far, requiring both the CFG and JSON output would result in
producing a null JSON object. It makes more sense to raise an error
directly when parsing command line arguments and options, so that users
know they won't get any output they might expect.
If JSON is required for the graph, we leave it to Graphviz instead:
# bpftool prog dump xlated <REF> visual | dot -Tjson
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-5-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Quentin Monnet [Wed, 5 Apr 2023 13:21:16 +0000 (14:21 +0100)]
bpftool: Support inline annotations when dumping the CFG of a program
We support dumping the control flow graph of loaded programs to the DOT
format with bpftool, but so far this feature wouldn't display the source
code lines available through BTF along with the eBPF bytecode. Let's add
support for these annotations, to make it easier to read the graph.
In prog.c, we move the call to dump_xlated_cfg() in order to pass and
use the full struct dump_data, instead of creating a minimal one in
draw_bb_node().
We pass the pointer to this struct down to dump_xlated_for_graph() in
xlated_dumper.c, where most of the logics is added. We deal with BTF
mostly like we do for plain or JSON output, except that we cannot use a
"nr_skip" value to skip a given number of linfo records (we don't
process the BPF instructions linearly, and apart from the root of the
graph we don't know how many records we should skip, so we just store
the last linfo and make sure the new one we find is different before
printing it).
When printing the source instructions to the label of a DOT graph node,
there are a few subtleties to address. We want some special newline
markers, and there are some characters that we must escape. To deal with
them, we introduce a new dedicated function btf_dump_linfo_dotlabel() in
btf_dumper.c. We'll reuse this function in a later commit to format the
filepath, line, and column references as well.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-4-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Quentin Monnet [Wed, 5 Apr 2023 13:21:15 +0000 (14:21 +0100)]
bpftool: Fix bug for long instructions in program CFG dumps
When dumping the control flow graphs for programs using the 16-byte long
load instruction, we need to skip the second part of this instruction
when looking for the next instruction to process. Otherwise, we end up
printing "BUG_ld_00" from the kernel disassembler in the CFG.
Fixes:
efcef17a6d65 ("tools: bpftool: generate .dot graph from CFG information")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-3-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Quentin Monnet [Wed, 5 Apr 2023 13:21:14 +0000 (14:21 +0100)]
bpftool: Fix documentation about line info display for prog dumps
The documentation states that when line_info is available when dumping a
program, the source line will be displayed "by default". There is no
notion of "default" here: the line is always displayed if available,
there is no way currently to turn it off.
In the next sentence, the documentation states that if "linum" is used
on the command line, the relevant filename, line, and column will be
displayed "on top of the source line". This is incorrect, as they are
currently displayed on the right side of the source line (or on top of
the eBPF instruction, not the source).
This commit fixes the documentation to address these points.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-2-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
YiFei Zhu [Wed, 5 Apr 2023 19:33:54 +0000 (19:33 +0000)]
selftests/bpf: Wait for receive in cg_storage_multi test
In some cases the loopback latency might be large enough, causing
the assertion on invocations to be run before ingress prog getting
executed. The assertion would fail and the test would flake.
This can be reliably reproduced by arbitrarily increasing the
loopback latency (thanks to [1]):
tc qdisc add dev lo root handle 1: htb default 12
tc class add dev lo parent 1:1 classid 1:12 htb rate 20kbps ceil 20kbps
tc qdisc add dev lo parent 1:12 netem delay 100ms
Fix this by waiting on the receive end, instead of instantly
returning to the assert. The call to read() will wait for the
default SO_RCVTIMEO timeout of 3 seconds provided by
start_server().
[1] https://gist.github.com/kstevens715/
4598301
Reported-by: Martin KaFai Lau <martin.lau@linux.dev>
Link: https://lore.kernel.org/bpf/9c5c8b7e-1d89-a3af-5400-14fde81f4429@linux.dev/
Fixes:
3573f384014f ("selftests/bpf: Test CGROUP_STORAGE behavior on shared egress + ingress")
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Link: https://lore.kernel.org/r/20230405193354.1956209-1-zhuyifei@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Kal Conley [Mon, 3 Apr 2023 12:03:59 +0000 (14:03 +0200)]
selftests: xsk: Deflakify STATS_RX_DROPPED test
Fix flaky STATS_RX_DROPPED test. The receiver calls getsockopt after
receiving the last (valid) packet which is not the final packet sent in
the test (valid and invalid packets are sent in alternating fashion with
the final packet being invalid). Since the last packet may or may not
have been dropped already, both outcomes must be allowed.
This issue could also be fixed by making sure the last packet sent is
valid. This alternative is left as an exercise to the reader (or the
benevolent maintainers of this file).
This problem was quite visible on certain setups. On one machine this
failure was observed 50% of the time.
Also, remove a redundant assignment of pkt_stream->nb_pkts. This field
is already initialized by __pkt_stream_alloc.
Fixes:
27e934bec35b ("selftests: xsk: make stat tests not spin on getsockopt")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230403120400.31018-1-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Kal Conley [Wed, 5 Apr 2023 08:29:04 +0000 (10:29 +0200)]
selftests: xsk: Disable IPv6 on VETH1
This change fixes flakiness in the BIDIRECTIONAL test:
# [is_pkt_valid] expected length [60], got length [90]
not ok 1 FAIL: SKB BUSY-POLL BIDIRECTIONAL
When IPv6 is enabled, the interface will periodically send MLDv1 and
MLDv2 packets. These packets can cause the BIDIRECTIONAL test to fail
since it uses VETH0 for RX.
For other tests, this was not a problem since they only receive on VETH1
and IPv6 was already disabled on VETH0.
Fixes:
a89052572ebb ("selftests/bpf: Xsk selftests framework")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Link: https://lore.kernel.org/r/20230405082905.6303-1-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Martin KaFai Lau [Wed, 5 Apr 2023 18:29:35 +0000 (11:29 -0700)]
Merge branch 'selftests: xsk: Add test case for packets at end of UMEM'
Kal Conley says:
====================
This patchset fixes a minor bug in xskxceiver.c then adds a test case
for valid packets at the end of the UMEM.
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Kal Conley [Mon, 3 Apr 2023 14:50:47 +0000 (16:50 +0200)]
selftests: xsk: Add test case for packets at end of UMEM
Add test case to testapp_invalid_desc for valid packets at the end of
the UMEM.
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230403145047.33065-3-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Kal Conley [Mon, 3 Apr 2023 14:50:46 +0000 (16:50 +0200)]
selftests: xsk: Use correct UMEM size in testapp_invalid_desc
Avoid UMEM_SIZE macro in testapp_invalid_desc which is incorrect when
the frame size is not XSK_UMEM__DEFAULT_FRAME_SIZE. Also remove the
macro since it's no longer being used.
Fixes:
909f0e28207c ("selftests: xsk: Add tests for 2K frame size")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230403145047.33065-2-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Kal Conley [Mon, 3 Apr 2023 13:01:51 +0000 (15:01 +0200)]
selftests: xsk: Add xskxceiver.h dependency to Makefile
xskxceiver depends on xskxceiver.h so tell make about it.
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Link: https://lore.kernel.org/r/20230403130151.31195-1-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Jiri Olsa [Mon, 3 Apr 2023 22:02:54 +0000 (00:02 +0200)]
kallsyms: Disable preemption for find_kallsyms_symbol_value
Artem reported suspicious RCU usage [1]. The reason is that verifier
calls find_kallsyms_symbol_value with preemption enabled which will
trigger suspicious RCU usage warning in rcu_dereference_sched call.
Disabling preemption in find_kallsyms_symbol_value and adding
__find_kallsyms_symbol_value function.
Fixes:
31bf1dbccfb0 ("bpf: Fix attaching fentry/fexit/fmod_ret/lsm to modules")
Reported-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Artem Savkov <asavkov@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/bpf/20230403220254.2191240-1-jolsa@kernel.org
[1] https://lore.kernel.org/bpf/ZBrPMkv8YVRiWwCR@samus.usersys.redhat.com/
Andrii Nakryiko [Tue, 4 Apr 2023 23:53:31 +0000 (16:53 -0700)]
Merge branch 'bpf: Follow up to RCU enforcement in the verifier.'
Alexei Starovoitov says:
====================
From: Alexei Starovoitov <ast@kernel.org>
The patch set is addressing a fallout from
commit
6fcd486b3a0a ("bpf: Refactor RCU enforcement in the verifier.")
It was too aggressive with PTR_UNTRUSTED marks.
Patches 1-6 are cleanup and adding verifier smartness to address real
use cases in bpf programs that broke with too aggressive PTR_UNTRUSTED.
The partial revert is done in patch 7 anyway.
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Alexei Starovoitov [Tue, 4 Apr 2023 04:50:29 +0000 (21:50 -0700)]
selftests/bpf: Add tracing tests for walking skb and req.
Add tracing tests for walking skb->sk and req->sk.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230404045029.82870-9-alexei.starovoitov@gmail.com
Alexei Starovoitov [Tue, 4 Apr 2023 04:50:28 +0000 (21:50 -0700)]
bpf: Undo strict enforcement for walking untagged fields.
The commit
6fcd486b3a0a ("bpf: Refactor RCU enforcement in the verifier.")
broke several tracing bpf programs. Even in clang compiled kernels there are
many fields that are not marked with __rcu that are safe to read and pass into
helpers, but the verifier doesn't know that they're safe. Aggressively marking
them as PTR_UNTRUSTED was premature.
Fixes:
6fcd486b3a0a ("bpf: Refactor RCU enforcement in the verifier.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230404045029.82870-8-alexei.starovoitov@gmail.com
Alexei Starovoitov [Tue, 4 Apr 2023 04:50:27 +0000 (21:50 -0700)]
bpf: Allowlist few fields similar to __rcu tag.
Allow bpf program access cgrp->kn, mm->exe_file, skb->sk, req->sk.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230404045029.82870-7-alexei.starovoitov@gmail.com
Alexei Starovoitov [Tue, 4 Apr 2023 04:50:26 +0000 (21:50 -0700)]
bpf: Refactor NULL-ness check in check_reg_type().
check_reg_type() unconditionally disallows PTR_TO_BTF_ID | PTR_MAYBE_NULL.
It's problematic for helpers that allow ARG_PTR_TO_BTF_ID_OR_NULL like
bpf_sk_storage_get(). Allow passing PTR_TO_BTF_ID | PTR_MAYBE_NULL into such
helpers. That technically includes bpf_kptr_xchg() helper, but in practice:
bpf_kptr_xchg(..., bpf_cpumask_create());
is still disallowed because bpf_cpumask_create() returns ref counted pointer
with ref_obj_id > 0.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230404045029.82870-6-alexei.starovoitov@gmail.com
Alexei Starovoitov [Tue, 4 Apr 2023 04:50:25 +0000 (21:50 -0700)]
bpf: Teach verifier that certain helpers accept NULL pointer.
bpf_[sk|inode|task|cgrp]_storage_[get|delete]() and bpf_get_socket_cookie() helpers
perform run-time check that sk|inode|task|cgrp pointer != NULL.
Teach verifier about this fact and allow bpf programs to pass
PTR_TO_BTF_ID | PTR_MAYBE_NULL into such helpers.
It will be used in the subsequent patch that will do
bpf_sk_storage_get(.., skb->sk, ...);
Even when 'skb' pointer is trusted the 'sk' pointer may be NULL.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230404045029.82870-5-alexei.starovoitov@gmail.com
Alexei Starovoitov [Tue, 4 Apr 2023 04:50:24 +0000 (21:50 -0700)]
bpf: Refactor btf_nested_type_is_trusted().
btf_nested_type_is_trusted() tries to find a struct member at corresponding offset.
It works for flat structures and falls apart in more complex structs with nested structs.
The offset->member search is already performed by btf_struct_walk() including nested structs.
Reuse this work and pass {field name, field btf id} into btf_nested_type_is_trusted()
instead of offset to make BTF_TYPE_SAFE*() logic more robust.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230404045029.82870-4-alexei.starovoitov@gmail.com
Alexei Starovoitov [Tue, 4 Apr 2023 04:50:23 +0000 (21:50 -0700)]
bpf: Remove unused arguments from btf_struct_access().
Remove unused arguments from btf_struct_access() callback.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230404045029.82870-3-alexei.starovoitov@gmail.com
Alexei Starovoitov [Tue, 4 Apr 2023 04:50:22 +0000 (21:50 -0700)]
bpf: Invoke btf_struct_access() callback only for writes.
Remove duplicated if (atype == BPF_READ) btf_struct_access() from
btf_struct_access() callback and invoke it only for writes. This is
possible to do because currently btf_struct_access() custom callback
always delegates to generic btf_struct_access() helper for BPF_READ
accesses.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230404045029.82870-2-alexei.starovoitov@gmail.com
Ilya Leoshkevich [Mon, 3 Apr 2023 17:29:35 +0000 (19:29 +0200)]
selftests/bpf: Add RESOLVE_BTFIDS dependency to bpf_testmod.ko
bpf_testmod.ko sometimes fails to build from a clean checkout:
BTF [M] linux/tools/testing/selftests/bpf/bpf_testmod/bpf_testmod.ko
/bin/sh: 1: linux-build//tools/build/resolve_btfids/resolve_btfids: not found
The reason is that RESOLVE_BTFIDS may not yet be built. Fix by adding a
dependency.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230403172935.1553022-1-iii@linux.ibm.com
Dave Marchevsky [Mon, 3 Apr 2023 20:00:27 +0000 (13:00 -0700)]
bpf: Fix struct_meta lookup for bpf_obj_free_fields kfunc call
bpf_obj_drop_impl has a void return type. In check_kfunc_call, the "else
if" which sets insn_aux->kptr_struct_meta for bpf_obj_drop_impl is
surrounded by a larger if statement which checks btf_type_is_ptr. As a
result:
* The bpf_obj_drop_impl-specific code will never execute
* The btf_struct_meta input to bpf_obj_drop is always NULL
* __bpf_obj_drop_impl will always see a NULL btf_record when called
from BPF program, and won't call bpf_obj_free_fields
* program-allocated kptrs which have fields that should be cleaned up
by bpf_obj_free_fields may instead leak resources
This patch adds a btf_type_is_void branch to the larger if and moves
special handling for bpf_obj_drop_impl there, fixing the issue.
Fixes:
ac9f06050a35 ("bpf: Introduce bpf_obj_drop")
Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230403200027.2271029-1-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Dave Thaler [Sun, 26 Mar 2023 05:49:46 +0000 (05:49 +0000)]
bpf, docs: Add docs on extended 64-bit immediate instructions
Add docs on extended 64-bit immediate instructions, including six instructions
previously undocumented. Include a brief description of maps and variables,
as used by those instructions.
V1 -> V2: rebased on top of latest master
V2 -> V3: addressed comments from Alexei
V3 -> V4: addressed comments from David Vernet
Signed-off-by: Dave Thaler <dthaler@microsoft.com>
Link: https://lore.kernel.org/r/20230326054946.2331-1-dthaler1968@googlemail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Anton Protopopov [Sun, 2 Apr 2023 11:43:40 +0000 (11:43 +0000)]
bpf: compute hashes in bloom filter similar to hashmap
If the value size in a bloom filter is a multiple of 4, then the jhash2()
function is used to compute hashes. The length parameter of this function
equals to the number of 32-bit words in input. Compute it in the hot path
instead of pre-computing it, as this is translated to one extra shift to
divide the length by four vs. one extra memory load of a pre-computed length.
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Link: https://lore.kernel.org/r/20230402114340.3441-1-aspsk@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Anton Protopopov [Sat, 1 Apr 2023 20:06:02 +0000 (20:06 +0000)]
bpf: optimize hashmap lookups when key_size is divisible by 4
The BPF hashmap uses the jhash() hash function. There is an optimized version
of this hash function which may be used if hash size is a multiple of 4. Apply
this optimization to the hashmap in a similar way as it is done in the bloom
filter map.
On practice the optimization is only noticeable for smaller key sizes, which,
however, is sufficient for many applications. An example is listed in the
following table of measurements (a hashmap of 65536 elements was used):
--------------------------------------------------------------------
| key_size | fullness | lookups /sec | lookups (opt) /sec | gain |
--------------------------------------------------------------------
| 4 | 25% | 42.990M | 46.000M | 7.0% |
| 4 | 50% | 37.910M | 39.094M | 3.1% |
| 4 | 75% | 34.486M | 36.124M | 4.7% |
| 4 | 100% | 31.760M | 32.719M | 3.0% |
--------------------------------------------------------------------
| 8 | 25% | 43.855M | 49.626M | 13.2% |
| 8 | 50% | 38.328M | 42.152M | 10.0% |
| 8 | 75% | 34.483M | 38.088M | 10.5% |
| 8 | 100% | 31.306M | 34.686M | 10.8% |
--------------------------------------------------------------------
| 12 | 25% | 38.398M | 43.770M | 14.0% |
| 12 | 50% | 33.336M | 37.712M | 13.1% |
| 12 | 75% | 29.917M | 34.440M | 15.1% |
| 12 | 100% | 27.322M | 30.480M | 11.6% |
--------------------------------------------------------------------
| 16 | 25% | 41.491M | 41.921M | 1.0% |
| 16 | 50% | 36.206M | 36.474M | 0.7% |
| 16 | 75% | 32.529M | 33.027M | 1.5% |
| 16 | 100% | 29.581M | 30.325M | 2.5% |
--------------------------------------------------------------------
| 20 | 25% | 34.240M | 36.787M | 7.4% |
| 20 | 50% | 30.328M | 32.663M | 7.7% |
| 20 | 75% | 27.536M | 29.354M | 6.6% |
| 20 | 100% | 24.847M | 26.505M | 6.7% |
--------------------------------------------------------------------
| 24 | 25% | 36.329M | 40.608M | 11.8% |
| 24 | 50% | 31.444M | 35.059M | 11.5% |
| 24 | 75% | 28.426M | 31.452M | 10.6% |
| 24 | 100% | 26.278M | 28.741M | 9.4% |
--------------------------------------------------------------------
| 28 | 25% | 31.540M | 31.944M | 1.3% |
| 28 | 50% | 27.739M | 28.063M | 1.2% |
| 28 | 75% | 24.993M | 25.814M | 3.3% |
| 28 | 100% | 23.513M | 23.500M | -0.1% |
--------------------------------------------------------------------
| 32 | 25% | 32.116M | 33.953M | 5.7% |
| 32 | 50% | 28.879M | 29.859M | 3.4% |
| 32 | 75% | 26.227M | 26.948M | 2.7% |
| 32 | 100% | 23.829M | 24.613M | 3.3% |
--------------------------------------------------------------------
| 64 | 25% | 22.535M | 22.554M | 0.1% |
| 64 | 50% | 20.471M | 20.675M | 1.0% |
| 64 | 75% | 19.077M | 19.146M | 0.4% |
| 64 | 100% | 17.710M | 18.131M | 2.4% |
--------------------------------------------------------------------
The following script was used to gather the results (SMT & frequency off):
cd tools/testing/selftests/bpf
for key_size in 4 8 12 16 20 24 28 32 64; do
for nr_entries in `seq 16384 16384 65536`; do
fullness=$(printf '%3s' $((nr_entries*100/65536)))
echo -n "key_size=$key_size: $fullness% full: "
sudo ./bench -d2 -a bpf-hashmap-lookup --key_size=$key_size --nr_entries=$nr_entries --max_entries=65536 --nr_loops=
2000000 --map_flags=0x40 | grep cpu
done
echo
done
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Link: https://lore.kernel.org/r/20230401200602.3275-1-aspsk@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov [Sat, 1 Apr 2023 16:07:21 +0000 (09:07 -0700)]
Merge branch 'Enable RCU semantics for task kptrs'
David Vernet says:
====================
In commit
22df776a9a86 ("tasks: Extract rcu_users out of union"), the
'refcount_t rcu_users' field was extracted out of a union with the
'struct rcu_head rcu' field. This allows us to use the field for
refcounting struct task_struct with RCU protection, as the RCU callback
no longer flips rcu_users to be nonzero after the callback is scheduled.
This patch set leverages this to do a few things:
1. Marks struct task_struct as RCU safe in the verifier, allowing
referenced kptr tasks stored in maps to be accessed in an RCU
read region without acquiring a reference (with just a NULL check).
2. Makes bpf_task_acquire() a KF_ACQUIRE | KF_RCU | KF_RET_NULL kfunc.
3. Removes bpf_task_kptr_get() and bpf_task_acquire_not_zero(), as
they're now redundant with the above two changes.
4. Updates selftests and documentation accordingly.
---
Changelog:
v1: https://lore.kernel.org/all/
20230331005733.406202-1-void@manifault.com/
v1 -> v2:
- Remove testcases validating nested trust inheritance. The first
version used 'struct task_struct __rcu *parent', but because that
field has the __rcu tag it functions differently on gcc and llvm and
causes gcc selftests to fail. Alexei is reworking nested trust,
anyways so let's leave it off for now (Alexei).
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
David Vernet [Fri, 31 Mar 2023 19:57:33 +0000 (14:57 -0500)]
bpf,docs: Update documentation to reflect new task kfuncs
Now that struct task_struct objects are RCU safe, and bpf_task_acquire()
can return NULL, we should update the BPF task kfunc documentation to
reflect the current state of the API.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230331195733.699708-4-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
David Vernet [Fri, 31 Mar 2023 19:57:32 +0000 (14:57 -0500)]
bpf: Remove now-defunct task kfuncs
In commit
22df776a9a86 ("tasks: Extract rcu_users out of union"), the
'refcount_t rcu_users' field was extracted out of a union with the
'struct rcu_head rcu' field. This allows us to safely perform a
refcount_inc_not_zero() on task->rcu_users when acquiring a reference on
a task struct. A prior patch leveraged this by making struct task_struct
an RCU-protected object in the verifier, and by bpf_task_acquire() to
use the task->rcu_users field for synchronization.
Now that we can use RCU to protect tasks, we no longer need
bpf_task_kptr_get(), or bpf_task_acquire_not_zero(). bpf_task_kptr_get()
is truly completely unnecessary, as we can just use RCU to get the
object. bpf_task_acquire_not_zero() is now equivalent to
bpf_task_acquire().
In addition to these changes, this patch also updates the associated
selftests to no longer use these kfuncs.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230331195733.699708-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
David Vernet [Fri, 31 Mar 2023 19:57:31 +0000 (14:57 -0500)]
bpf: Make struct task_struct an RCU-safe type
struct task_struct objects are a bit interesting in terms of how their
lifetime is protected by refcounts. task structs have two refcount
fields:
1. refcount_t usage: Protects the memory backing the task struct. When
this refcount drops to 0, the task is immediately freed, without
waiting for an RCU grace period to elapse. This is the field that
most callers in the kernel currently use to ensure that a task
remains valid while it's being referenced, and is what's currently
tracked with bpf_task_acquire() and bpf_task_release().
2. refcount_t rcu_users: A refcount field which, when it drops to 0,
schedules an RCU callback that drops a reference held on the 'usage'
field above (which is acquired when the task is first created). This
field therefore provides a form of RCU protection on the task by
ensuring that at least one 'usage' refcount will be held until an RCU
grace period has elapsed. The qualifier "a form of" is important
here, as a task can remain valid after task->rcu_users has dropped to
0 and the subsequent RCU gp has elapsed.
In terms of BPF, we want to use task->rcu_users to protect tasks that
function as referenced kptrs, and to allow tasks stored as referenced
kptrs in maps to be accessed with RCU protection.
Let's first determine whether we can safely use task->rcu_users to
protect tasks stored in maps. All of the bpf_task* kfuncs can only be
called from tracepoint, struct_ops, or BPF_PROG_TYPE_SCHED_CLS, program
types. For tracepoint and struct_ops programs, the struct task_struct
passed to a program handler will always be trusted, so it will always be
safe to call bpf_task_acquire() with any task passed to a program.
Note, however, that we must update bpf_task_acquire() to be KF_RET_NULL,
as it is possible that the task has exited by the time the program is
invoked, even if the pointer is still currently valid because the main
kernel holds a task->usage refcount. For BPF_PROG_TYPE_SCHED_CLS, tasks
should never be passed as an argument to the any program handlers, so it
should not be relevant.
The second question is whether it's safe to use RCU to access a task
that was acquired with bpf_task_acquire(), and stored in a map. Because
bpf_task_acquire() now uses task->rcu_users, it follows that if the task
is present in the map, that it must have had at least one
task->rcu_users refcount by the time the current RCU cs was started.
Therefore, it's safe to access that task until the end of the current
RCU cs.
With all that said, this patch makes struct task_struct is an
RCU-protected object. In doing so, we also change bpf_task_acquire() to
be KF_ACQUIRE | KF_RCU | KF_RET_NULL, and adjust any selftests as
necessary. A subsequent patch will remove bpf_task_kptr_get(), and
bpf_task_acquire_not_zero() respectively.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230331195733.699708-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov [Sat, 1 Apr 2023 16:05:57 +0000 (09:05 -0700)]
Merge branch 'Prepare veristat for packaging'
Andrii Nakryiko says:
====================
This patch set relicenses veristat.c to dual GPL-2.0/BSD-2 license and
prepares it to be mirrored to Github at libbpf/veristat repo.
Few small issues in the source code are fixed, found during Github sync
preparetion.
v2->v3:
- fix few warnings about uninitialized variable uses;
v1->v2:
- drop linux/compiler.h and define own ARRAY_SIZE macro;
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Fri, 31 Mar 2023 22:24:05 +0000 (15:24 -0700)]
veristat: small fixed found in -O2 mode
Fix few potentially unitialized variables uses, found while building
veristat.c in release (-O2) mode.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230331222405.3468634-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Fri, 31 Mar 2023 22:24:04 +0000 (15:24 -0700)]
veristat: avoid using kernel-internal headers
Drop linux/compiler.h include, which seems to be needed for ARRAY_SIZE
macro only. Redefine own version of ARRAY_SIZE instead.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230331222405.3468634-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Fri, 31 Mar 2023 22:24:03 +0000 (15:24 -0700)]
veristat: improve version reporting
For packaging version of the tool is important, so add a simple way to
specify veristat version for upstream mirror at Github.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230331222405.3468634-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Fri, 31 Mar 2023 22:24:02 +0000 (15:24 -0700)]
veristat: relicense veristat.c as dual GPL-2.0-only or BSD-2-Clause licensed
Dual-license veristat.c to dual GPL-2.0-only or BSD-2-Clause license.
This is needed to mirror it to Github to make it convenient for distro
packagers to package veristat as a separate package.
Veristat grew into a useful tool by itself, and there are already
a bunch of users relying on veristat as generic BPF loading and
verification helper tool. So making it easy to packagers by providing
Github mirror just like we do for bpftool and libbpf is the next step to
get veristat into the hands of users.
Apart from few typo fixes, I'm the sole contributor to veristat.c so
far, so no extra Acks should be needed for relicensing.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230331222405.3468634-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
James Hilliard [Fri, 31 Mar 2023 07:58:42 +0000 (01:58 -0600)]
selftests/bpf: Fix conflicts with built-in functions in bench_local_storage_create
The fork function in gcc is considered a built in function due to
being used by libgcov when building with gnu extensions.
Rename fork to sched_process_fork to prevent this conflict.
See details:
https://github.com/gcc-mirror/gcc/commit/
d1c38823924506d389ca58d02926ace21bdf82fa
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82457
Fixes the following error:
In file included from progs/bench_local_storage_create.c:6:
progs/bench_local_storage_create.c:43:14: error: conflicting types for
built-in function 'fork'; expected 'int(void)'
[-Werror=builtin-declaration-mismatch]
43 | int BPF_PROG(fork, struct task_struct *parent, struct
task_struct *child)
| ^~~~
Fixes:
cbe9d93d58b1 ("selftests/bpf: Add bench for task storage creation")
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230331075848.1642814-1-james.hilliard1@gmail.com
Alexei Starovoitov [Fri, 31 Mar 2023 16:40:16 +0000 (09:40 -0700)]
Merge branch 'selftests/bpf: Add read_build_id function'
Jiri Olsa says:
====================
hi,
this selftests cleanup was previously posted as part of file build id changes [1],
which might take more time, so I'm sending the selftests changes separately so it
won't get stuck.
v4 changes:
- added size argument to read_build_id [Andrii]
- condition changes in parse_build_id_buf [Andrii]
- use ELF_C_READ_MMAP in elf_begin [Andrii]
- return -ENOENT in read_build_id if build id is not found [Andrii]
- dropped elf class check [Andrii]
thanks,
jirka
[1] https://lore.kernel.org/bpf/
20230316170149.
4106586-1-jolsa@kernel.org/
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jiri Olsa [Fri, 31 Mar 2023 09:31:57 +0000 (11:31 +0200)]
selftests/bpf: Replace extract_build_id with read_build_id
Replacing extract_build_id with read_build_id that parses out
build id directly from elf without using readelf tool.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230331093157.1749137-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jiri Olsa [Fri, 31 Mar 2023 09:31:56 +0000 (11:31 +0200)]
selftests/bpf: Add read_build_id function
Adding read_build_id function that parses out build id from
specified binary.
It will replace extract_build_id and also be used in following
changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230331093157.1749137-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jiri Olsa [Fri, 31 Mar 2023 09:31:55 +0000 (11:31 +0200)]
selftests/bpf: Add err.h header
Moving error macros from profiler.inc.h to new err.h header.
It will be used in following changes.
Also adding PTR_ERR macro that will be used in following changes.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230331093157.1749137-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
David Vernet [Thu, 30 Mar 2023 14:52:03 +0000 (09:52 -0500)]
selftests/bpf: Add testcases for ptr_*_or_null_ in bpf_kptr_xchg
The second argument of the bpf_kptr_xchg() helper function is
ARG_PTR_TO_BTF_ID_OR_NULL. A recent patch fixed a bug whereby the
verifier would fail with an internal error message if a program invoked
the helper with a PTR_TO_BTF_ID | PTR_MAYBE_NULL register. This testcase
adds some testcases to ensure that it fails gracefully moving forward.
Before the fix, these testcases would have failed an error resembling
the following:
; p = bpf_kfunc_call_test_acquire(&(unsigned long){0});
99: (7b) *(u64 *)(r10 -16) = r7 ; frame1: ...
100: (bf) r1 = r10 ; frame1: ...
101: (07) r1 += -16 ; frame1: ...
; p = bpf_kfunc_call_test_acquire(&(unsigned long){0});
102: (85) call bpf_kfunc_call_test_acquire#13908
; frame1: R0_w=ptr_or_null_prog_test_ref_kfunc...
; p = bpf_kptr_xchg(&v->ref_ptr, p);
103: (bf) r1 = r6 ; frame1: ...
104: (bf) r2 = r0
; frame1: R0_w=ptr_or_null_prog_test_ref_kfunc...
105: (85) call bpf_kptr_xchg#194
verifier internal error: invalid PTR_TO_BTF_ID register for type match
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230330145203.80506-2-void@manifault.com
David Vernet [Thu, 30 Mar 2023 14:52:02 +0000 (09:52 -0500)]
bpf: Handle PTR_MAYBE_NULL case in PTR_TO_BTF_ID helper call arg
When validating a helper function argument, we use check_reg_type() to
ensure that the register containing the argument is of the correct type.
When the register's base type is PTR_TO_BTF_ID, there is some
supplemental logic where we do extra checks for various combinations of
PTR_TO_BTF_ID type modifiers. For example, for PTR_TO_BTF_ID,
PTR_TO_BTF_ID | PTR_TRUSTED, and PTR_TO_BTF_ID | MEM_RCU, we call
map_kptr_match_type() for bpf_kptr_xchg() calls, and
btf_struct_ids_match() for other helper calls.
When an unhandled PTR_TO_BTF_ID type modifier combination is passed to
check_reg_type(), the verifier fails with an internal verifier error
message. This can currently be triggered by passing a PTR_MAYBE_NULL
pointer to helper functions (currently just bpf_kptr_xchg()) with an
ARG_PTR_TO_BTF_ID_OR_NULL arg type. For example, by callin
bpf_kptr_xchg(&v->kptr, bpf_cpumask_create()).
Whether or not passing a PTR_MAYBE_NULL arg to an
ARG_PTR_TO_BTF_ID_OR_NULL argument is valid is an interesting question.
In a vacuum, it seems fine. A helper function with an
ARG_PTR_TO_BTF_ID_OR_NULL arg would seem to be implying that it can
handle either a NULL or non-NULL arg, and has logic in place to detect
and gracefully handle each. This is the case for bpf_kptr_xchg(), which
of course simply does an xchg(). On the other hand, bpf_kptr_xchg() also
specifies OBJ_RELEASE, and refcounting semantics for a PTR_MAYBE_NULL
pointer is different than handling it for a NULL _OR_ non-NULL pointer.
For example, with a non-NULL arg, we should always fail if there was not
a nonzero refcount for the value in the register being passed to the
helper. For PTR_MAYBE_NULL on the other hand, it's unclear. If the
pointer is NULL it would be fine, but if it's not NULL, it would be
incorrect to load the program.
The current solution to this is to just fail if PTR_MAYBE_NULL is
passed, and to instead require programs to have a NULL check to
explicitly handle the NULL and non-NULL cases. This seems reasonable.
Not only would it possibly be quite complicated to correctly handle
PTR_MAYBE_NULL refcounting in the verifier, but it's also an arguably
odd programming pattern in general to not explicitly handle the NULL
case anyways. For example, it seems odd to not care about whether a
pointer you're passing to bpf_kptr_xchg() was successfully allocated in
a program such as the following:
private(MASK) static struct bpf_cpumask __kptr * global_mask;
SEC("tp_btf/task_newtask")
int BPF_PROG(example, struct task_struct *task, u64 clone_flags)
{
struct bpf_cpumask *prev;
/* bpf_cpumask_create() returns PTR_MAYBE_NULL */
prev = bpf_kptr_xchg(&global_mask, bpf_cpumask_create());
if (prev)
bpf_cpumask_release(prev);
return 0;
}
This patch therefore updates the verifier to explicitly check for
PTR_MAYBE_NULL in check_reg_type(), and fail gracefully if it's
observed. This isn't really "fixing" anything unsafe or incorrect. We're
just updating the verifier to fail gracefully, and explicitly handle
this pattern rather than unintentionally falling back to an internal
verifier error path. A subsequent patch will update selftests.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230330145203.80506-1-void@manifault.com
Andrii Nakryiko [Thu, 30 Mar 2023 19:01:15 +0000 (12:01 -0700)]
veristat: change guess for __sk_buff from CGROUP_SKB to SCHED_CLS
SCHED_CLS seems to be a better option as a default guess for freplace
programs that have __sk_buff as a context type.
Reported-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230330190115.3942962-1-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Xu Kuohai [Wed, 29 Mar 2023 01:10:48 +0000 (21:10 -0400)]
selftests/bpf: Rewrite two infinite loops in bound check cases
The two infinite loops in bound check cases added by commit
1a3148fc171f ("selftests/bpf: Check when bounds are not in the 32-bit range")
increased the execution time of test_verifier from about 6 seconds to
about 9 seconds. Rewrite these two infinite loops to finite loops to get
rid of this extra time cost.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20230329011048.1721937-1-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov [Thu, 30 Mar 2023 00:22:02 +0000 (17:22 -0700)]
Merge branch 'veristat: add better support of freplace programs'
Andrii Nakryiko says:
====================
Teach veristat how to deal with freplace BPF programs. As they can't be
directly loaded by veristat without custom user-space part that sets correct
target program FD, veristat always fails freplace programs. This patch set
teaches veristat to guess target program type that will be inherited by
freplace program itself, and subtitute it for BPF_PROG_TYPE_EXT (freplace) one
for the purposes of BPF verification.
Patch #1 fixes bug in libbpf preventing overriding freplace with specific
program type.
Patch #2 adds convenient -d flag to request veristat to emit libbpf debug
logs. It help debugging why a specific BPF program fails to load, if the
problem is not due to BPF verification itself.
v3->v4:
- fix optional kern_name check when guessing prog type (Alexei);
v2->v3:
- fix bpf_obj_id selftest that uses legacy bpf_prog_test_load() helper,
which always sets program type programmatically; teach the helper to do it
only if actually necessary (Stanislav);
v1->v2:
- fix compilation error reported by old GCC (my GCC v11 doesn't produce even
a warning) and Clang (see CI failure at [0]):
GCC version:
veristat.c: In function ‘fixup_obj’:
veristat.c:908:1: error: label at end of compound statement
908 | skip_freplace_fixup:
| ^~~~~~~~~~~~~~~~~~~
Clang version:
veristat.c:909:1: error: label at end of compound statement is a C2x extension [-Werror,-Wc2x-extensions]
}
^
1 error generated.
[0] https://github.com/kernel-patches/bpf/actions/runs/
4515972059/jobs/
7953845335
====================
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Mon, 27 Mar 2023 18:52:02 +0000 (11:52 -0700)]
veristat: guess and substitue underlying program type for freplace (EXT) progs
SEC("freplace") (i.e., BPF_PROG_TYPE_EXT) programs are not loadable as
is through veristat, as kernel expects actual program's FD during
BPF_PROG_LOAD time, which veristat has no way of knowing.
Unfortunately, freplace programs are a pretty important class of
programs, especially when dealing with XDP chaining solutions, which
rely on EXT programs.
So let's do our best and teach veristat to try to guess the original
program type, based on program's context argument type. And if guessing
process succeeds, we manually override freplace/EXT with guessed program
type using bpf_program__set_type() setter to increase chances of proper
BPF verification.
We rely on BTF and maintain a simple lookup table. This process is
obviously not 100% bulletproof, as valid program might not use context
and thus wouldn't have to specify correct type. Also, __sk_buff is very
ambiguous and is the context type across many different program types.
We pick BPF_PROG_TYPE_CGROUP_SKB for now, which seems to work fine in
practice so far. Similarly, some program types require specifying attach
type, and so we pick one out of possible few variants.
Best effort at its best. But this makes veristat even more widely
applicable.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230327185202.1929145-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Mon, 27 Mar 2023 18:52:01 +0000 (11:52 -0700)]
veristat: add -d debug mode option to see debug libbpf log
Add -d option to allow requesting libbpf debug logs from veristat.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230327185202.1929145-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Mon, 27 Mar 2023 18:52:00 +0000 (11:52 -0700)]
libbpf: disassociate section handler on explicit bpf_program__set_type() call
If user explicitly overrides programs's type with
bpf_program__set_type() API call, we need to disassociate whatever
SEC_DEF handler libbpf determined initially based on program's SEC()
definition, as it's not goind to be valid anymore and could lead to
crashes and/or confusing failures.
Also, fix up bpf_prog_test_load() helper in selftests/bpf, which is
force-setting program type (even if that's completely unnecessary; this
is quite a legacy piece of code), and thus should expect auto-attach to
not work, yet one of the tests explicitly relies on auto-attach for
testing.
Instead, force-set program type only if it differs from the desired one.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230327185202.1929145-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martin KaFai Lau [Wed, 29 Mar 2023 20:10:56 +0000 (13:10 -0700)]
Merge branch 'Allow BPF TCP CCs to write app_limited'
Yixin Shen says:
====================
This series allow BPF TCP CCs to write app_limited of struct
tcp_sock. A built-in CC or one from a kernel module is already
able to write to app_limited of struct tcp_sock. Until now,
a BPF CC doesn't have write access to this member of struct
tcp_sock.
v2:
- Merge the test of writing app_limited into the test of
writing sk_pacing. (Martin KaFai Lau)
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Yixin Shen [Wed, 29 Mar 2023 07:35:58 +0000 (07:35 +0000)]
selftests/bpf: test a BPF CC writing app_limited
Test whether a TCP CC implemented in BPF is allowed to write
app_limited in struct tcp_sock. This is already allowed for
the built-in TCP CC.
Signed-off-by: Yixin Shen <bobankhshen@gmail.com>
Link: https://lore.kernel.org/r/20230329073558.8136-3-bobankhshen@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Yixin Shen [Wed, 29 Mar 2023 07:35:57 +0000 (07:35 +0000)]
bpf: allow a TCP CC to write app_limited
A CC that implements tcp_congestion_ops.cong_control() should be able to
write app_limited. A built-in CC or one from a kernel module is already
able to write to this member of struct tcp_sock.
For a BPF program, write access has not been allowed, yet.
Signed-off-by: Yixin Shen <bobankhshen@gmail.com>
Link: https://lore.kernel.org/r/20230329073558.8136-2-bobankhshen@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>