[media] tlg2300: fix missing check for audio creation

If we fail to set up the capture device we go through negative indexes and
badness happens. Add the missing test.
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=44551

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx88: Fix reset delays

This was reported in March 2011 by Mirek Slugen, and a simple fix posted at the time then
never got fixed and applied. The bug is still present.
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=37703

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers/media/platform/davinci/vpfe_capture.c: fix error return code

Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Cc: Prabhakar Lad <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers/media/rc/ati_remote.c: fix error return code

Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers/media/rc/redrat3.c: fix error return code

Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ivtv-alsa: Remove EXPERIMENTAL from Kconfig and revise Kconfig help text

Remove the (somewhat meaningless?) dependency on EXPERIMENTAL for the
ivtv-alsa driver.  Revise the Kconfig help text to be a little clearer for
the lay person, while we are here.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ivtv-alsa, ivtv: Connect ivtv PCM capture stream to ivtv-alsa interface driver

This change hooks up the ivtv PCM capture stream to the ivtv-alsa interface
driver.  This is all that should be needed for basic CX23415/CX23416 PCM
audio capture to be available via ALSA device nodes.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ivtv, ivtv-alsa: Add initial ivtv-alsa interface driver for ivtv

This is a cut-and-paste port of the cx18-alsa driver to
create an ivtv-alsa interface module for the ivtv driver.
It is not actually hooked-up to the PCM stream DMA buffers
from the ivtv driver yet.  That will be done in a coming change,
since that portion is so very different from the cx18 driver.
This code has all or more of the bugs and shortcomings of the
cx18-alsa interface driver: inconsistent use of itvsc->slock,
ivtv-alsa-mixer.c is dead code, assumes 48 ksps regardless
of the actual setting of the audio capture, problems with
proper struct ivtv and struct ivtv_stream housekeeping,
struct ivtv_open_id.v4l2_fh abuse, and $DIETY knows what else.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Add the usb id of the Trekstor DVB-T Stick Terres 2.0

It needs the e4000 tuner driver.

Signed-off-by: Philipp Dreimann <philipp@dreimann.net>
Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mc44s803: implement get_if_frequency()

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] af9013: add debug for IF frequency

Used IF frequency is one of the most important parameter to know.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mxl5005s: implement get_if_frequency()

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tda8261: add printk levels

This is done as a minimal printk updating patch to ensure correctness. Yes
it should all one day use dev_foo(), but that's one for the maintainers.
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=32932

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rtl28xxu: add support for Elonics E4000 tuner

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Elonics E4000 silicon tuner driver

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mceusb: Optimize DIV_ROUND_CLOSEST call

DIV_ROUND_CLOSEST is faster if the compiler knows it will only be
dealing with unsigned dividends.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rtl28xxu: correct usb_clear_halt() usage

It is not allowed to call usb_clear_halt() after urbs are submitted.
That causes oops sometimes. Move whole streaming_ctrl() logic to
power_ctrl() in order to avoid wrong usb_clear_halt() use. Also,
configuring streaming endpoint in streaming_ctrl() sounds like a
little bit wrong as it is aimed for control stream gate.

Reported-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media v4l2-mem2mem: Use list_first_entry

Use list_first_entry instead of list_entry which makes the intention
of the code more clear.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media v4l2-mem2mem: fix src/out and dst/cap num_rdy

src bufs belong to out queue, dst bufs belong to in queue. Currently
this is not a real problem since all users currently need exactly one
input and one output buffer.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ir-rx51: Adjust dependencies

Although this kind of IR diode circuitry is known to exist only in
N900 hardware, nothing prevents making similar circuitry on any OMAP
based board. The MACH_NOKIA_RX51 dependency is thus not something we
want to be there.

Also, this should depend on LIRC as it is a LIRC driver.

Signed-off-by: Timo Kokkonen <timo.t.kokkonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

MAINTAINERS: fix the path for the media drivers that got renamed

Due to the media tree path renaming, several drivers change their
location. Update MAINTAINERS accordingly.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

MAINTAINERS: Remove entries for drivers that got removed

Those two drivers got removed, as gspca replaced both. So,
remove the old entries.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Revert "[media] gscaler: mark it as BROKEN"

This reverts commit aa740e0a6fd5fe6ab59a95d67d8756c77df3fa66.

Now that the Makefile got added, we can remove this one.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] exynos-gsc: Add missing Makefile

Add missing Makefile that got lost while rebasing commit 655ceff16b45c847
"[media] gscaler: Add Makefile for G-Scaler Driver" onto latest source tree.

Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ir-rx51: Trivial fixes

-Fix typo
-Change pwm_timer_num type to match type in platform data
-Remove extra parenthesis
-Replace magic constant with proper bit defintions
-Remove duplicate exit pointer

Signed-off-by: Timo Kokkonen <timo.t.kokkonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ttusbir: ad support suspend and resume

While here, fix the led name: the led is green, not yellow.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media:dvb:fix up ENOIOCTLCMD error handling

At commit 07d106d0, Linus pointed out that ENOIOCTLCMD should be
translated as ENOTTY to user mode.

Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers/media/platform/mx2_emmaprp.c: adjust inconsistent IS_ERR and PTR_ERR

Change the call to IS_ERR to test the value that was just initialized and
is returned using PTR_ERR.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e,e1;
@@

(
if (IS_ERR(e)) { ... PTR_ERR(e) ... }
|
if (IS_ERR(e=e1)) { ... PTR_ERR(e) ... }
|
*if (IS_ERR(e))
 { ...
*  PTR_ERR(e1)
   ... }
)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] iguanair: do not modify transmit buffer

Since commit "[media] rc-core: move timeout and checks to lirc", the
incoming buffer is used after the driver transmits.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gscaler: mark it as BROKEN

-EMISSINGMAKEFILE

Without a Makefile, the driver will not compile, causing
breakages for arm exynos5 sub-architecture.

Cc: Shaik Ameer Basha <shaik.ameer@samsung.com>
Cc: Sungchun Kang <sungchun.kang@samsung.com>
Cc: "Seung-Woo Kim/Mobile S/W Platform Lab(DMC)/E4" <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mem2mem_testdev: Make m2mtest_dev_release function static

Fixes the following warning:
drivers/media/platform/mem2mem_testdev.c:73:6: warning:
symbol 'm2mtest_dev_release' was not declared. Should it be static?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ttusbir: Add USB dependency

This patch fixes the error:
ERROR: "usb_speed_string" [drivers/usb/core/usbcore.ko] undefined!

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rc: fix buffer overrun

"[media] rc-core: move timeout and checks to lirc" introduced a buffer
overrun by passing the number of bytes, rather than the number of samples,
to the transmit function.

Signed-off-by: Sean Young <sean@mess.org>
Acked-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] stk1160: Remove unused 'ifnum' variable

Since ifnum is not used anywhere it is safe to remove it.
This was spotted by Hans's media_tree daily build.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] s5p-g2d: Remove unneeded struct vb2_queue clear on queue_init()

queue_init() is always called by v4l2_m2m_ctx_init(), which allocates
a context struct v4l2_m2m_ctx with kzalloc.
Therefore, there is no need to clear vb2_queue src/dst structs.

Cc: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] s5p-jpeg: Remove unneeded struct vb2_queue clear on queue_init()

queue_init() is always called by v4l2_m2m_ctx_init(), which allocates
a context struct v4l2_m2m_ctx with kzalloc.
Therefore, there is no need to clear vb2_queue src/dst structs.

Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] s5p-fimc: Remove unneeded struct vb2_queue clear on queue_init()

queue_init() is always called by v4l2_m2m_ctx_init(), which allocates
a context struct v4l2_m2m_ctx with kzalloc.
Therefore, there is no need to clear vb2_queue src/dst structs.

Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mem2mem-emmaprp: Remove unneeded struct vb2_queue clear on queue_init()

queue_init() is always called by v4l2_m2m_ctx_init(), which allocates
a context struct v4l2_m2m_ctx with kzalloc.
Therefore, there is no need to clear vb2_queue src/dst structs.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Acked-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mem2mem-deinterlace: Remove unneeded struct vb2_queue clear on queue_init()

queue_init() is always called by v4l2_m2m_ctx_init(), which allocates
a context struct v4l2_m2m_ctx with kzalloc.
Therefore, there is no need to clear vb2_queue src/dst structs.

Cc: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] coda: Remove unneeded struct vb2_queue clear on queue_init()

queue_init() is always called by v4l2_m2m_ctx_init(), which allocates
a context struct v4l2_m2m_ctx with kzalloc.
Therefore, there is no need to clear vb2_queue src/dst structs.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Acked-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mem2mem_testdev: Remove unneeded struct vb2_queue clear on queue_init()

queue_init() is always called by v4l2_m2m_ctx_init(), which allocates
a context struct v4l2_m2m_ctx with kzalloc.
Therefore, there is no need to clear vb2_queue src/dst structs.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] vivi: Remove unneeded struct vb2_queue clearing

struct vb2_queue is allocated through kzalloc as part of a larger struct,
there's no need to clear it.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] stk1160: Remove unneeded struct vb2_queue clearing

struct vb2_queue is allocated through kzalloc as part of a larger struct,
there's no need to clear it.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dvb_usb_v2: use dvb_usb_dbg_usb_control_msg()

Convert drivers: au6610, ce6230, ec168, rtl28xxu for
dvb_usb_dbg_usb_control_msg() macro.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dvb_usb_v2: add debug macro dvb_usb_dbg_usb_control_msg

For dumping usb_control_msg().

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] au6610: define reset_resume

After qt1010 change that device seems to survive from reset resume.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gscaler: Add Makefile for G-Scaler Driver

This patch adds the Makefile for G-Scaler driver.

Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gscaler: Add m2m functionality for the G-Scaler driver

This patch adds the memory to memory (m2m) interface functionality
for the G-Scaler driver.

[mchehab@redhat.com: Fixed a small coding style issue:
 sizeof *ctx should be sizeof(*ctx)]
Signed-off-by: Hynwoong Kim <khw0178.kim@samsung.com>
Signed-off-by: Sungchun Kang <sungchun.kang@samsung.com>
Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gscaler: Add core functionality for the G-Scaler driver

This patch adds the core functionality for the G-Scaler driver.

Signed-off-by: Hynwoong Kim <khw0178.kim@samsung.com>
Signed-off-by: Sungchun Kang <sungchun.kang@samsung.com>
Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gscaler: Add new driver for generic scaler

This patch adds support for G-Scaler (Generic Scaler) device which is a
new device for scaling and color space conversion on EXYNOS5 SoCs. This
patch adds the code for register definitions and register operations.

This device supports the followings as key feature.
 1) Input image format
   - RGB888/565, YUV422 1P/2P, YUV420 2P/3P, TILE
 2) Output image format
   - RGB888/565, YUV422 1P/2P, YUV420 2P/3P, YUV444
 3) Input rotation
   - 0/90/180/270 degree, X/Y Flip
 4) Scale ratio
   - 1/16 scale down to 8 scale up
 5) CSC
   - RGB to YUV / YUV to RGB
 6) Size
   - 2048 x 2048 for tile or rotation
   - 4800 x 3344 other case

Signed-off-by: Hynwoong Kim <khw0178.kim@samsung.com>
Signed-off-by: Sungchun Kang <sungchun.kang@samsung.com>
Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l: Add new YVU420 multi planar fourcc definition

This patch adds new 'YM21' fourcc definition for multiplanar YCrCb
pixel format - V4L2_PIX_FMT_YVU420M.

Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Merge tag 'v3.6-rc5' into staging/for_v3.7

Linux 3.6-rc5

* tag 'v3.6-rc5': (334 commits)
  Linux 3.6-rc5
  HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured
  Remove user-triggerable BUG from mpol_to_str
  xen/pciback: Fix proper FLR steps.
  uml: fix compile error in deliver_alarm()
  dj: memory scribble in logi_dj
  Fix order of arguments to compat_put_time[spec|val]
  xen: Use correct masking in xen_swiotlb_alloc_coherent.
  xen: fix logical error in tlb flushing
  xen/p2m: Fix one-off error in checking the P2M tree directory.
  powerpc: Don't use __put_user() in patch_instruction
  powerpc: Make sure IPI handlers see data written by IPI senders
  powerpc: Restore correct DSCR in context switch
  powerpc: Fix DSCR inheritance in copy_thread()
  powerpc: Keep thread.dscr and thread.dscr_inherit in sync
  powerpc: Update DSCR on all CPUs when writing sysfs dscr_default
  powerpc/powernv: Always go into nap mode when CPU is offline
  powerpc: Give hypervisor decrementer interrupts their own handler
  powerpc/vphn: Fix arch_update_cpu_topology() return value
  ARM: gemini: fix the gemini build
  ...

[media] rtl2832: implement .read_ber()

Implementation taken from rtl2830.

Cc: Thomas Mair <thomas.mair86@googlemail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rtl2832: implement .read_snr()

Based rtl2830 implementation.

Cc: Thomas Mair <thomas.mair86@googlemail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rtl2832: implement .get_frontend()

Copied from rtl2830.

Cc: Thomas Mair <thomas.mair86@googlemail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rtl28xxu: fix rtl2832u module reload fails bug

This is workaround / partial fix.

rtl2832u_power_ctrl() and rtl2832u_frontend_attach() needs to
be go through carefully and fix properly. There is clearly
some logical errors when handling power-management ang GPIOs...

Signed-off-by: Antti Palosaari <crope@iki.fi>
Cc: Thomas Mair <thomas.mair86@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rtl28xxu: stream did not start after stop on USB3.0

Stream did not start anymore after stream was stopped once.

Following error can be seen, xhci_hcd
WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.

usb_clear_halt for streaming endpoint helps.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tda18218: switch to Kernel logging

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tda18218: re-implement tda18218_wr_regs()

Old i2c message length splitting logic was faulty. Make it better.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] qt1010: remove debug register dump

I didn't found easy way to handle register dump only when needed so
remove it totally. It is quite useless and trivial function, every
developer could write new one in few minutes when needed.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] qt1010: convert for Kernel logging

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gl861: reset_resume support

It survives now on reset_resume.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] qt1010: do not change frequency during init

Changing cached frequency during init is something no-no.
Make it behave a little bit better. After that device could
survive from suspend/resume when streaming is ongoing.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Remove outdated comment

The uvcvideo driver now supports USERPTR, and isn't limited to YUYV and
MJPEG anymore.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media: coda: remove duplicated call of fh_to_ctx in vidioc_s_fmt_vid_out

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Acked-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rc: ite-cir: Initialise ite_dev::rdev earlier

ite_dev::rdev is currently initialised in ite_probe() after
rc_register_device() returns.  If a newly registered device is opened
quickly enough, we may enable interrupts and try to use ite_dev::rdev
before it has been initialised.  Move it up to the earliest point we
can, right after calling rc_allocate_device().

Reported-and-tested-by: YunQiang Su <wzssyqa@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mt9m032.c: introduce missing initialization

The result of one call to a function is tested, and then at the second call
to the same function, the previous result, and not the current result, is
tested again.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression ret;
identifier f;
statement S1,S2;
@@

*ret = f(...);
if (\(ret != 0\|ret < 0\|ret == NULL\)) S1
... when any
*f(...);
if (\(ret != 0\|ret < 0\|ret == NULL\)) S2
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] m5mols: introduce missing initialization

The result of one call to a function is tested, and then at the second call
to the same function, the previous result, and not the current result, is
tested again.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression ret;
identifier f;
statement S1,S2;
@@

*ret = f(...);
if (\(ret != 0\|ret < 0\|ret == NULL\)) S1
... when any
*f(...);
if (\(ret != 0\|ret < 0\|ret == NULL\)) S2
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca_pac7302: extend register documentation

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca_pac7302: avoid duplicate calls of the image quality adjustment functions on capturing start

There is no need to call the image quality adjustment functions in sd_start.
The gspca main driver calls v4l2_ctrl_handler_setup in gspca_init_transfer,
which already applies all image control values.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca_pac7302: increase default value for white balance temperature

The current white balance temperature default value is 4, which is much too small (possible values are 0-255).
Improve the picture quality by increasing the default value to 55, which is the default value used by the Windows driver.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca_pac7302: add sharpness control

The Windows driver uses page 0 register 0xb6 for sharpness adjustment.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca_pac7302: make red balance and blue balance controls work again

Fix a regression from kernel 3.4 which has been introduced with the conversion of the gspca driver to the v4l2 control framework.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Cc: stable@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca_pac7302: add support for device 1ae7:2001 Speedlink Snappy Microphone SL-6825-SBK

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Cc: stable@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca: Fix input urb creation / destruction surrounding suspend resume

1) We always re-create the input-urb on resume, so we must also always
   destroy it on suspend to avoid leaking it
2) If we're going to do an init_transfer, then that will destroy the urb
   before starting the stream (nop if there is none), and (re-)create it
   once the stream is started. So there is little use in creating it, if
   we're going to do an init_transfer immediately afterward

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca: Update / fix various comments wrt workqueue usb_lock usage

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca_finepix: Remove unnecessary lock/unlock call

gspca_main: init_transfer does not do anything between calling sd_start
(which starts the workqueue) and releasing the usb_lock, so this
synchronization is a nop, remove it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca: Don't set gspca_dev->dev to NULL before stop0

In commit a3d6e8cc0e6ddc8b3cfdeb3c979f07ed1aa528b3 gspca_dev->dev is set
to NULL on disconnect, before calling stop0. The plan was to get rid of
gspca_dev->present and instead simply check for gspca_dev->dev everywhere
where we were checking for present. This should be race free since all users
of gspca_dev->dev hold the usb_lock, or so I thought.

But I was wrong, drivers which use a work-queue + synchronous bulk transfers
to get the video data don't hold the usb_lock while doing so, their stop0
callbacks stop the workqueue, so they won't be using gspca_dev->dev anymore
after the stop0 call, but they might be dereferincing it before, so we should
not set gspca_dev->dev to NULL on disconnect before calling stop0.

This also means that the workqueue functions in these drivers cannot
use gspca_dev->dev to check if they need to stop because of disconnection,
so we will need to keep gspca_dev->present around, and set that to 0 on
disconnect, before calling stop0. Unfortunately as part of the plan to remove
gspca_dev->present, these workqueues where already moved over to checking
for gspca_dev->dev instead of gspca_dev->present as part of commit
254902b01d2acc6aced99ec17caa4c6cd890cdea, so this patch also reverts those
parts of that commit.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers/media/usb/gspca/cpia1.c: fix error return code

Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca: dubious one-bit signed bitfield

This patch changes some signed integers to unsigned because
they are not intended for negative values and sparse
is making noise about it.

Sparse gives eight of these errors:
drivers/media/usb/gspca/ov519.c:144:29: error: dubious one-bit signed bitfield

Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] pwc: Remove unneeded struct vb2_queue clearing

struct vb2_queue is allocated through kzalloc as part of a larger struct,
there's no need to clear it.

Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] pwc: Use vb2 queue mutex through a single name

This lock was being taken using two different names
(pointers) in the same function.
Both names refer to the same lock,
so this wasn't an error; but it looked very strange.

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] shark,shark2: declare resume/suspend functions as static

drivers/media/radio/shark2.o: In function `_GLOBAL__sub_I_65535_0_usb_shark_suspend':
drivers/media/radio/radio-shark2.c:344: multiple definition of `usb_shark_suspend'
drivers/media/radio/radio-shark.o:/home/v4l/v4l/patchwork/drivers/media/radio/radio-shark.c:379: first defined here
drivers/media/radio/shark2.o: In function `usb_shark_resume':
drivers/media/radio/radio-shark2.c:349: multiple definition of `usb_shark_resume'
drivers/media/radio/radio-shark.o:/home/v4l/v4l/patchwork/drivers/media/radio/radio-shark.c:384: first defined here

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] radio-shark: Add support for suspend & resume

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] radio-shark2: Add support for suspend & resume

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] radio-tea5777: Add support for tuning AM

This completes my work on the Griffin radioSHARK2 driver, let me use this
opportunity to thank Hisaaki Shibata for his generous donation of a
Griffin radioSHARK2 to me, which has made this driver possible.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] radio-tea5777.c: Get rid of do_div usage

freq fits easily into 32 bits until it gets shifted, so make it 32 bits,
and cast it to 64 bits before shifting.

[mchehab@redhat.com: also remove asm/div64.h header, as this is not
 needed anymore]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] snd_tea575x: Add support for tuning AM

Add support for tuning AM (on devices with the necessary additional
hardware components), and advertise the available bands using the new
VIDIOC_ENUM_FREQ_BANDS ioctl.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
CC: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media-api-docs: Documented V4L2_TUNER_CAP_HWSEEK_PROG_LIM in G_TUNER docs

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] stb0899: return internally tuned frequency via get_frontend.

Am 14.08.2012 14:05, schrieb Manu Abraham:
>> My other device, a STB0899, always reports the set frequency. So it seems
>> driver dependent whether it reports the actually locked frequency found by
>> the zig-zag-algorithm or just the set frequency to tune to.
>
> The STV0299 blindly sets the value based on a software zigzag (due to simpler
> hardware), but this might not be accurate enough. On the other hand, the
> STB0899 internally does zig-zag in hardware for DVB-S2, and partly in
> software for DVB-S.
>
> In any event, the get_frontend callback should return the value that is read
> from the demodulator registers, rather than the cached original value that
> which was requested to be tuned.
>
> The stb0899 returns only the cached value IIRC. Maybe I will fix this soon,
> or maybe you can send a patch.
This is what I get after the patch:

Sat.    Pol.    Band    Freq (MHz) Set    Freq (MHz) Get    Delta (MHz)
S19,2E    H     L       10744             10748,474         4,474
S19,2E    H     L       10773             10777,944         4,944
S19,2E    H     L       10832             10836,953         4,953
S19,2E    H     L       10861             10868,774         7,774
...

Signed-off-by: Reinhard Nißl <rnissl@gmx.de>
Cc: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DocBook: Fix docbook compilation

changeset 1248c7cb66d734b60efed41be7c7b86909812c0e broke html compilation:

Documentation/DocBook/v4l2.xml:584: parser error : Entity 'sub-subdev-g-edid' not defined
Documentation/DocBook/v4l2.xml:626: parser error : chunk is not well balanced
Documentation/DocBook/media_api.xml:74: parser error : Failure to process entity sub-v4l2
Documentation/DocBook/media_api.xml:74: parser error : Entity 'sub-v4l2' not defined

I suspect that one file was simply missed at the patch. Yet, keeping
it broken is a very bad idea, so we should either remove the broken
patch or to remove just the invalid include. Let's take the latter
approach.

Due to that, a warning is now produced:

Error: no ID for constraint linkend: v4l2-subdev-edid.

Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mt9p031: Fix horizontal and vertical blanking configuration

Compute the horizontal blanking value according to the datasheet. The
value written to the hblank and vblank registers must be equal to the
number of blank columns and rows minus one.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mt9v032: Export horizontal and vertical blanking as V4L2 controls

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mt9v032: Provide link frequency control

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mt9v032: Provide pixel rate control

Provide pixel rate control calculated from external clock and horizontal
binning factor.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l2-ctrls: Add v4l2_ctrl_[gs]_ctrl_int64()

These helper functions get and set a 64-bit control's value from within
a driver. They are similar to v4l2_ctrl_[gs]_ctrl() but operate on
64-bit integer controls instead of 32-bit controls.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ad9389b: driver for the Analog Devices AD9389B video encoder

Initial version of this driver.

The full datasheets are available from the Analog Devices website:

  http://ez.analog.com/docs/DOC-1741

Not all features of the receiver are supported by this driver for various
reasons. Most notably:

- No CEC support (the CEC API needs a lot more discussion)
- No HDCP repeater support (we don't use that either)

I'm sure that there are more things missing, but this driver does work
well for our hardware.

Note that I am using the register addresses instead of register names: the
datasheet containing the register descriptions is organized by register
address. Using names would make the datasheet lookup very hard. An attempt
was made to try and document what is being done when registers are used
instead.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] adv7604: driver for the Analog Devices ADV7604 video decoder

Initial version of this driver.

The full datasheets are available from the Analog Devices website:

  http://ez.analog.com/docs/DOC-1545

Not all features of the receiver are supported by this driver for various
reasons. Most notably:

- No CEC support (the CEC API needs a lot more discussion)
- Only port A of the four HDMI input ports is implemented (our hardware only
  uses that port)
- No HDCP repeater support (we don't use that either)

And since there are some 600-odd pages of datasheet for this single device,
I'm sure that there are many more things missing, but this driver does work
well for our hardware.

Note that I am using the register addresses instead of register names: the
datasheet containing the register descriptions is organized by register
address. Using names would make the datasheet lookup very hard. An attempt
was made to try and document what is being done when registers are used
instead.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l2-common: add CVT and GTF detection functions

These two helper functions detect whether the analog video timings detected
by the video receiver match the VESA CVT or GTF standards.

They basically do the inverse of the CVT and GTF modeline calculations.

This patch also adds a helper function that will determine the aspect ratio
based on the provided EDID values. This aspect ratio can be given to the GTF
helper function.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l2-common: add v4l_match_dv_timings

Add the v4l_match_dv_timings function that can be used to compare two
v4l2_dv_timings structs.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>