OSDN Git Service
Naga Radhesh [Thu, 5 Jan 2012 06:19:14 +0000 (22:19 -0800)]
Input: tc3589x-keypad - add missing kerneldoc
This adds two missing kerneldoc entries for the TC3589x
keypad driver.
Signed-off-by: Naga Radhesh <naga.radheshy@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Dmitry Torokhov [Thu, 5 Jan 2012 06:18:51 +0000 (22:18 -0800)]
Input: ucb1400-ts - switch to using dev_xxx() for diagnostic messages
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Dmitry Torokhov [Thu, 5 Jan 2012 06:18:42 +0000 (22:18 -0800)]
Input: ucb1400_ts - convert to threaded IRQ
Instead of manually create and handler kernel thread switch to threaded
IRQ and let kernel IRQ core manage thread for us.
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Dmitry Torokhov [Thu, 5 Jan 2012 06:18:31 +0000 (22:18 -0800)]
Input: ucb1400_ts - drop inline annotations
Let compiler figure out which ones makes most sense to inline.
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Dmitry Torokhov [Thu, 5 Jan 2012 06:18:22 +0000 (22:18 -0800)]
Input: usb1400_ts - add __devinit/__devexit section annotations
Add __devinit/__devexit sections annotations so parts of code could be
discarded after completing driver initialization.
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Dmitry Torokhov [Thu, 5 Jan 2012 06:18:12 +0000 (22:18 -0800)]
Input: ucb1400_ts - set driver owner
So that it has proper symlink to the containing module in sysfs.
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Dmitry Torokhov [Thu, 5 Jan 2012 06:17:57 +0000 (22:17 -0800)]
Input: ucb1400_ts - convert to use dev_pm_ops
Instead of using legacy PM interfaces switch to using dev_pm_ops.
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Dmitry Torokhov [Fri, 30 Dec 2011 23:16:45 +0000 (15:16 -0800)]
Input: psmouse - make sure we do not use stale methods
Several protocol initialization routines can fail after they set up
psmouse methods, such as reconnect and disconnect. This may lead to
these stale methods used with different protocol that they were
intended to be used for and may cause unpredictavle behavior and/or
crashes.
Make sure we start with a clean slate before executing each and every
protocol detection and/or initialization routine.
Reported-by: Paul Fox <pgf@laptop.org>
Acked-by: Tai-hwa Liang <avatar@sentelic.com>
Acked-by: Paul Fox <pgf@laptop.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Dima Zavin [Fri, 30 Dec 2011 23:16:44 +0000 (15:16 -0800)]
Input: evdev - do not block waiting for an event if fd is nonblock
If there is a full packet in the buffer, and we overflow that buffer
right after checking for that condition, it would have been possible
for us to block indefinitely (rather, until the next full packet) even if
the file was marked as O_NONBLOCK.
Cc: Jeff Brown <jeffbrown@android.com>
Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Dima Zavin [Fri, 30 Dec 2011 23:16:44 +0000 (15:16 -0800)]
Input: evdev - if no events and non-block, return EAGAIN not 0
Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Dima Zavin [Fri, 30 Dec 2011 23:16:44 +0000 (15:16 -0800)]
Input: evdev - only allow reading events if a full packet is present
Without this, it was possible for the reader to get ahead of packet_head.
If the input device generated a partial packet *right* after the reader
got ahead, then we can get into a situation where the device is marked
readable, but read always returns 0 until the next packet is finished
(i.e a SYN is generated by the input driver).
This situation can also happen if we overflow the buffer while a reader
is trying to read an event out.
Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Jianchun Bian [Fri, 30 Dec 2011 23:16:21 +0000 (15:16 -0800)]
Input: add driver for pixcir i2c touchscreens
This patch adds a driver for PIXCIR's I2C connected touchscreens.
Signed-off-by: Jianchun <jcbian@pixcir.com.cn>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Mark Brown [Thu, 29 Dec 2011 17:58:16 +0000 (09:58 -0800)]
Input: samsung-keypad - implement runtime power management support
When runtime power management is enabled put the Samsung keypad driver
into suspend mode with wakeups disabled whenever the device is open but
a key is not actually been pressed. As well as saving a trivial amount of
power this will support the use of SoC wide idle modes which put the entire
device into a retention mode and use explicit wakeup sources to exit.
Since not all of the interrupt controllers used with the driver support
set_irq_wake() (though they all do the right thing) and there's a nasty
WARN() when we disable wake after failing to enable it keep track of the
current wake status from runtime PM and only disable wake if we managed
to enable it; I'm not entirely sure why this doesn't affect the existing
uses of the API in the driver.
System suspend is unaffected as the driver core will runtime resume any
suspended devices prior to system suspend.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Conflicts:
drivers/input/keyboard/samsung-keypad.c
Rakesh Iyer [Fri, 30 Dec 2011 03:27:44 +0000 (19:27 -0800)]
Input: tegra-kbc - report wakeup key for some platforms
Tegra kbc cannot detect exact keypress causing wakeup in interrupt mode.
Allow wakeup keypress to be reported for certain platforms.
Signed-off-by: Rakesh Iyer <riyer@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Olof Johansson [Thu, 29 Dec 2011 17:58:16 +0000 (09:58 -0800)]
Input: tegra-kbc - add device tree bindings
This adds a simple device tree binding to the tegra keyboard controller.
Also, mark the default keymap as __devinitdata since it is not referenced
after boot.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Heiko Stübner [Wed, 28 Dec 2011 05:21:17 +0000 (21:21 -0800)]
Input: add driver for AUO In-Cell touchscreens using pixcir ICs
Some displays from AUO have a so called in-cell touchscreen, meaning it
is built directly into the display unit.
Touchdata is gathered through PIXCIR Tango-ICs and processed in an
Atmel ATmega168P with custom firmware. Communication between the host
system and ATmega is done via I2C.
Devices using this touch solution include the Dell Streak5 and the family
of Qisda ebook readers.
The driver reports single- and multi-touch events including touch area
values.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Heikki Krogerus [Sat, 24 Dec 2011 08:09:04 +0000 (00:09 -0800)]
Input: mpu3050 - configure the sampling method
This will improve the output of the sensor.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Heikki Krogerus [Sat, 24 Dec 2011 07:57:09 +0000 (23:57 -0800)]
Input: mpu3050 - ensure we enable interrupts
This also changes the devname parameter delivered to
request_threaded_irq() from "mpu_int" to "mpu3050".
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Olof Johansson [Fri, 23 Dec 2011 09:20:44 +0000 (01:20 -0800)]
Input: mpu3050 - add of_match table for device-tree probing
Adding invn,mpu3050 as the initial id.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Tai-hwa Liang [Fri, 23 Dec 2011 09:14:28 +0000 (01:14 -0800)]
Input: sentelic - document the latest hardware
- Add documentation for the Cx/Dx hardware release;
- Fix wrong register offset for retrieving button information;
- Document programming sequence for page register R/W;
- Document a couple of supported gesture IDs.
Signed-off-by: Tai-hwa Liang <avatar@sentelic.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Jason Gerecke [Mon, 12 Dec 2011 08:12:04 +0000 (00:12 -0800)]
Input: wacom - add LED support for Cintiq 24HD
The Cintiq 24HD has three LEDs on the left side of the tablet and
three LEDs on the right side of the tablet. Switching to LED 0,
1, or 2 will enable the top, middle, or bottom LED for the respective
side. Switching to LED 3 turns off the LEDs on the respective side.
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Jason Gerecke [Mon, 12 Dec 2011 08:11:45 +0000 (00:11 -0800)]
Input: wacom - add support for Cintiq 24HD
Adds support for the Cintiq 24HD. There are two quirks about this
model that haven't been seen in prior tablets. First, a second
touch ring is present on this display; it is being exposed via the
ABS_THROTTLE axis. Second, three capacitive buttons at the top of
the unit are available; though physically a touch strip, we report
the use of these buttons with generic KEY_ events.
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Courtney Cavin [Mon, 12 Dec 2011 07:38:27 +0000 (23:38 -0800)]
Input: add driver for Sharp gp2ap002a00f proximity sensor
This driver adds support for Sharp's GP2AP002A00F proximity sensor. The
proximity is measured as a binary switch, i.e. an object is either
detected or not detected. Hence, this driver is implemented as a switch
that reports SW_FRONT_PROXIMITY.
Reviewed-by: Datta Shubhrajyoti <shubhrajyoti@ti.com>
Signed-off-by: Courtney Cavin <courtney.cavin@sonyericsson.com>
Signed-off-by: Oskar Andero <oskar.andero@sonyericsson.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Axel Lin [Mon, 12 Dec 2011 07:45:26 +0000 (23:45 -0800)]
Input: keyboard - staticise non-exported symbols
These symbols are not used outside it's driver so no need to
make the symbol global.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Axel Lin [Mon, 12 Dec 2011 07:43:32 +0000 (23:43 -0800)]
Input: mc13783-pwrbutton - convert to use module_platform_driver()
This patch converts mc13783-pwrbutton to use the module_platform_driver()
macro which makes the code smaller and a bit simpler.
Also staticise mc13783_pwrbutton_driver which is not used outside
this driver so no need to make the symbol global.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Dmitry Torokhov [Thu, 1 Dec 2011 07:44:31 +0000 (23:44 -0800)]
Input: migor-ts - rework probe() to simplify error path
Register input device last so that we do not have to reset
input device pointer after calling input_unregister_device().
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Dmitry Torokhov [Thu, 1 Dec 2011 07:44:30 +0000 (23:44 -0800)]
Input: migor-ts - use proper client data accessor functions
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Dmitry Torokhov [Thu, 1 Dec 2011 07:44:30 +0000 (23:44 -0800)]
Input: migor-ts - convert to a threaded IRQ
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Dmitry Torokhov [Tue, 29 Nov 2011 10:20:35 +0000 (02:20 -0800)]
Input: htcpen - switch to DMI-based autoloading
Having module device table based on PNP id produces the following warning:
CC drivers/input/touchscreen/htcpen.o
drivers/input/touchscreen/htcpen.c:50: warning: 'pnp_ids' defined but not used
This happens because it is not a PNP driver, bit rather ISA driver and
pnp_ids table is not used anywhere. To fix this issue let's switch to
DMI-based module table instead,
Reported-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Jonathan Cameron [Tue, 29 Nov 2011 19:23:27 +0000 (11:23 -0800)]
Input: ad7879-i2c - use swapped variant of i2c_smbus_read_word_data
This variant was introduced in
i2c: boilerplate function for byte swapped smbus_write/read_word_data
This also has the side effect of ensuring any errors from the i2c
read and no longer mangled.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
JJ Ding [Tue, 29 Nov 2011 19:14:13 +0000 (11:14 -0800)]
Input: touchscreen - use macro module_platform_driver()
Commit
940ab88962bc1aff3273a8356d64577a6e386736 introduced a new macro to
save some platform_driver boilerplate code. Use it.
Signed-off-by: JJ Ding <dgdunix@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
JJ Ding [Tue, 29 Nov 2011 19:08:43 +0000 (11:08 -0800)]
Input: serio - use macro module_platform_driver()
Commit
940ab88962bc1aff3273a8356d64577a6e386736 introduced a new macro to
save some platform_driver boilerplate code. Use it.
Signed-off-by: JJ Ding <dgdunix@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
JJ Ding [Tue, 29 Nov 2011 19:08:41 +0000 (11:08 -0800)]
Input: mouse - use macro module_platform_driver()
Commit
940ab88962bc1aff3273a8356d64577a6e386736 introduced a new macro to
save some platform_driver boilerplate code. Use it.
Signed-off-by: JJ Ding <dgdunix@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
JJ Ding [Tue, 29 Nov 2011 19:08:40 +0000 (11:08 -0800)]
Input: misc - use macro module_platform_driver()
Commit
940ab88962bc1aff3273a8356d64577a6e386736 introduced a new macro to
save some platform_driver boilerplate code. Use it.
Signed-off-by: JJ Ding <dgdunix@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
JJ Ding [Tue, 29 Nov 2011 19:08:39 +0000 (11:08 -0800)]
Input: keyboard - use macro module_platform_driver()
Commit
940ab88962bc1aff3273a8356d64577a6e386736 introduced a new macro to
save some platform_driver boilerplate code. Use it.
Signed-off-by: JJ Ding <dgdunix@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Heiko Stübner [Tue, 29 Nov 2011 19:04:09 +0000 (11:04 -0800)]
Input: add generic GPIO-tilt driver
There exist tilt switches that simply report their tilt-state via
some gpios. The number and orientation of their axes can vary
depending on the switch used and the build of the device. Also two
or more one-axis switches could be combined to provide multi-dimensional
orientation.
One example of a device using such a switch is the family of Qisda
ebook readers, where the switch provides information about the
landscape / portrait orientation of the device. The example in
Documentation/input/gpio-tilt.txt documents exactly this one-axis
device.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Lars-Peter Clausen [Tue, 29 Nov 2011 09:27:58 +0000 (01:27 -0800)]
Input: remove redundant spi driver bus initialization
In ancient times it was necessary to manually initialize the bus field of an
spi_driver to spi_bus_type. These days this is done in spi_driver_register(),
so we can drop the manual assignment.
The patch was generated using the following coccinelle semantic patch:
// <smpl>
@@
identifier _driver;
@@
struct spi_driver _driver = {
.driver = {
- .bus = &spi_bus_type,
},
};
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Axel Lin [Tue, 29 Nov 2011 07:44:47 +0000 (23:44 -0800)]
Input: samsung-keypad - remove redundant MODULE_ALIAS
MODULE_DEVICE_TABLE will setup the module alias for us, thus adding
MODULE_ALIAS for an entry already in MODULE_DEVICE_TABLE is redundant.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Axel Lin [Tue, 29 Nov 2011 07:44:47 +0000 (23:44 -0800)]
Input: ad7879-i2c - remove redundant MODULE_ALIAS
MODULE_DEVICE_TABLE will setup the module alias for us, thus adding
MODULE_ALIAS for an entry already in MODULE_DEVICE_TABLE is redundant.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Dmitry Torokhov [Tue, 29 Nov 2011 09:51:07 +0000 (01:51 -0800)]
Merge commit 'v3.2-rc3' into next
Linus Torvalds [Thu, 24 Nov 2011 04:20:28 +0000 (20:20 -0800)]
Linux 3.2-rc3
Linus Torvalds [Thu, 24 Nov 2011 04:19:31 +0000 (20:19 -0800)]
Merge git://github.com/rustyrussell/linux
* git://github.com/rustyrussell/linux:
virtio-pci: make reset operation safer
virtio-mmio: Correct the name of the guest features selector
virtio: add HAS_IOMEM dependency to MMIO platform bus driver
Michael S. Tsirkin [Thu, 17 Nov 2011 15:41:15 +0000 (17:41 +0200)]
virtio-pci: make reset operation safer
virtio pci device reset actually just does an I/O
write, which in PCI is really posted, that is it
can complete on CPU before the device has received it.
Further, interrupts might have been pending on
another CPU, so device callback might get invoked after reset.
This conflicts with how drivers use reset, which is typically:
reset
unregister
a callback running after reset completed can race with
unregister, potentially leading to use after free bugs.
Fix by flushing out the write, and flushing pending interrupts.
This assumes that device is never reset from
its vq/config callbacks, or in parallel with being
added/removed, document this assumption.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Sasha Levin [Tue, 15 Nov 2011 14:17:18 +0000 (16:17 +0200)]
virtio-mmio: Correct the name of the guest features selector
Guest features selector spelling mistake.
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Heiko Carstens [Tue, 15 Nov 2011 09:13:24 +0000 (10:13 +0100)]
virtio: add HAS_IOMEM dependency to MMIO platform bus driver
Fix this compile error on s390:
CC [M] drivers/virtio/virtio_mmio.o
drivers/virtio/virtio_mmio.c: In function 'vm_get_features':
drivers/virtio/virtio_mmio.c:107:2: error: implicit declaration of function 'writel'
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Linus Torvalds [Thu, 24 Nov 2011 01:26:22 +0000 (17:26 -0800)]
Merge branch 'upstream-linus' of git://github.com/jgarzik/libata-dev
* 'upstream-linus' of git://github.com/jgarzik/libata-dev:
libata: fix build without BMDMA
[libata] ahci_platform: fix DT probing
Linus Torvalds [Wed, 23 Nov 2011 22:58:46 +0000 (14:58 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci:
PCI hotplug: shpchp: don't blindly claim non-AMD 0x7450 device IDs
PCI: pciehp: wait 100 ms after Link Training check
PCI: pciehp: wait 1000 ms before Link Training check
PCI: pciehp: Retrieve link speed after link is trained
PCI: Let PCI_PRI depend on PCI
PCI: Fix compile errors with PCI_ATS and !PCI_IOV
PCI / ACPI: Make acpiphp ignore root bridges using PCIe native hotplug
Linus Torvalds [Wed, 23 Nov 2011 22:28:13 +0000 (14:28 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tyhicks/ecryptfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
eCryptfs: Extend array bounds for all filename chars
eCryptfs: Flush file in vma close
eCryptfs: Prevent file create race condition
Tyler Hicks [Wed, 23 Nov 2011 17:31:24 +0000 (11:31 -0600)]
eCryptfs: Extend array bounds for all filename chars
From mhalcrow's original commit message:
Characters with ASCII values greater than the size of
filename_rev_map[] are valid filename characters.
ecryptfs_decode_from_filename() will access kernel memory beyond
that array, and ecryptfs_parse_tag_70_packet() will then decrypt
those characters. The attacker, using the FNEK of the crafted file,
can then re-encrypt the characters to reveal the kernel memory past
the end of the filename_rev_map[] array. I expect low security
impact since this array is statically allocated in the text area,
and the amount of memory past the array that is accessible is
limited by the largest possible ASCII filename character.
This patch solves the issue reported by mhalcrow but with an
implementation suggested by Linus to simply extend the length of
filename_rev_map[] to 256. Characters greater than 0x7A are mapped to
0x00, which is how invalid characters less than 0x7A were previously
being handled.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Michael Halcrow <mhalcrow@google.com>
Cc: stable@kernel.org
Tyler Hicks [Mon, 21 Nov 2011 23:31:29 +0000 (17:31 -0600)]
eCryptfs: Flush file in vma close
Dirty pages weren't being written back when an mmap'ed eCryptfs file was
closed before the mapping was unmapped. Since f_ops->flush() is not
called by the munmap() path, the lower file was simply being released.
This patch flushes the eCryptfs file in the vm_ops->close() path.
https://launchpad.net/bugs/870326
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Cc: stable@kernel.org [2.6.39+]
Tyler Hicks [Mon, 21 Nov 2011 23:31:02 +0000 (17:31 -0600)]
eCryptfs: Prevent file create race condition
The file creation path prematurely called d_instantiate() and
unlock_new_inode() before the eCryptfs inode info was fully
allocated and initialized and before the eCryptfs metadata was written
to the lower file.
This could result in race conditions in subsequent file and inode
operations leading to unexpected error conditions or a null pointer
dereference while attempting to use the unallocated memory.
https://launchpad.net/bugs/813146
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Cc: stable@kernel.org
Linus Torvalds [Wed, 23 Nov 2011 17:50:42 +0000 (09:50 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/rostedt/linux-ktest
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Check parent options for iterated tests
Linus Torvalds [Wed, 23 Nov 2011 17:50:05 +0000 (09:50 -0800)]
Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
i2c: Make i2cdev_notifier_call static
i2c: Delete ANY_I2C_BUS
i2c: Fix device name for 10-bit slave address
i2c-algo-bit: Generate correct i2c address sequence for 10-bit target
Linus Torvalds [Wed, 23 Nov 2011 17:49:39 +0000 (09:49 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/broonie/regulator
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: TPS65910: Fix VDD1/2 voltage selector count
Linus Torvalds [Wed, 23 Nov 2011 17:47:25 +0000 (09:47 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (31 commits)
drm: integer overflow in drm_mode_dirtyfb_ioctl()
drivers/gpu/vga/vgaarb.c: add missing kfree
drm/radeon/kms/atom: unify i2c gpio table handling
drm/radeon/kms: fix up gpio i2c mask bits for r4xx for real
ttm: Don't return the bo reserved on error path
drm/radeon/kms: add a CS ioctl flag not to rewrite tiling flags in the CS
drm/i915: Fix inconsistent backlight level during disabled
drm, i915: Fix memory leak in i915_gem_busy_ioctl().
drm/i915: Use DPCD value for max DP lanes.
drm/i915: Initiate DP link training only on the lanes we'll be using
drm/i915: Remove trailing white space
drm/i915: Try harder during dp pattern 1 link training
drm/i915: Make DP prepare/commit consistent with DP dpms
drm/i915: Let panel power sequencing hardware do its job
drm/i915: Treat PCH eDP like DP in most places
drm/i915: Remove link_status field from intel_dp structure
drm/i915: Move common PCH_PP_CONTROL setup to ironlake_get_pp_control
drm/i915: Module parameters using '-1' as default must be signed type
drm/i915: Turn on another required clock gating bit on gen6.
drm/i915: Turn on a required 3D clock gating bit on Sandybridge.
...
Afzal Mohammed [Tue, 8 Nov 2011 13:24:10 +0000 (18:54 +0530)]
regulator: TPS65910: Fix VDD1/2 voltage selector count
Count of selector voltage is required for regulator_set_voltage
to work via set_voltage_sel. VDD1/2 currently have it as zero,
so regulator_set_voltage won't work for VDD1/2.
Update count (n_voltages) for VDD1/2.
Output Voltage = (step value * 12.5 mV + 562.5 mV) * gain
With above expr, number of voltages that can be selected is
step value count * gain count
constant for gain count will be called VDD1_2_NUM_VOLT_COARSE
existing constant for step value count is VDD1_2_NUM_VOLTS,
use VDD1_2_NUM_VOLT_FINE instead to make clear that step value
is not the only component in deciding selectable voltage count
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Shubhrajyoti D [Wed, 23 Nov 2011 10:33:07 +0000 (11:33 +0100)]
i2c: Make i2cdev_notifier_call static
The function i2cdev_notifier_call is used only in i2c-dev file
making it static.
Also removes the following sparse warning
drivers/i2c/i2c-dev.c:582:5: warning: symbol 'i2cdev_notifier_call'
was not declared. Should it be static?
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Wed, 23 Nov 2011 10:33:07 +0000 (11:33 +0100)]
i2c: Delete ANY_I2C_BUS
Last piece of code using ANY_I2C_BUS was deleted almost 2 years ago,
so ANY_I2C_BUS can go away as well.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Wed, 23 Nov 2011 10:33:07 +0000 (11:33 +0100)]
i2c: Fix device name for 10-bit slave address
10-bit addresses overlap with traditional 7-bit addresses, leading in
device name collisions. Add an arbitrary offset to 10-bit addresses to
prevent this collision. The offset was chosen so that the address is
still easily recognizable.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Jeffrey (Sheng-Hui) Chu [Wed, 23 Nov 2011 10:33:07 +0000 (11:33 +0100)]
i2c-algo-bit: Generate correct i2c address sequence for 10-bit target
The wrong bits were put on the wire, fix that.
This fixes kernel bug #42562.
Signed-off-by: Sheng-Hui J. Chu <jeffchu@broadcom.com>
Cc: stable@kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Xi Wang [Wed, 23 Nov 2011 06:12:01 +0000 (01:12 -0500)]
drm: integer overflow in drm_mode_dirtyfb_ioctl()
There is a potential integer overflow in drm_mode_dirtyfb_ioctl()
if userspace passes in a large num_clips. The call to kmalloc would
allocate a small buffer, and the call to fb->funcs->dirty may result
in a memory corruption.
Reported-by: Haogang Chen <haogangchen@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Tue, 22 Nov 2011 23:09:20 +0000 (15:09 -0800)]
Revert "of/irq: of_irq_find_parent: check for parent equal to child"
This reverts commit
dc9372808412edbc653a675a526c2ee6c0c14a91.
As requested by Ben Herrenschmidt:
"This breaks some powerpc platforms at least. The practice of having
a node provide an explicit "interrupt-parent" property pointing to
itself is an old trick that we've used in the past to allow a
device-node to have interrupts routed to different controllers.
In that case, the node also contains an interrupt-map, so the node is
its own parent, the interrupt resolution hits the map, which then can
route each individual interrupt to a different parent."
Grant says:
"Ah, nuts, yes that is broken then. Yes, please revert the commit and
Rob & I will come up with a better solution.
Rob, I think it can be done by explicitly checking for np ==
desc->interrupt_parent in of_irq_init() instead of relying on
of_irq_find_parent() returning NULL."
Requested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Cc: Tanmay Inamdar <tinamdar@apm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 22 Nov 2011 21:19:21 +0000 (13:19 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
mount_subtree() pointless use-after-free
iio: fix a leak due to improper use of anon_inode_getfd()
microblaze: bury asm/namei.h
Julia Lawall [Tue, 15 Nov 2011 22:53:11 +0000 (14:53 -0800)]
drivers/gpu/vga/vgaarb.c: add missing kfree
kbuf is a buffer that is local to this function, so all of the error paths
leaving the function should release it.
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Mon, 21 Nov 2011 17:41:21 +0000 (12:41 -0500)]
drm/radeon/kms/atom: unify i2c gpio table handling
Split the quirks and i2c_rec assignment into separate
functions used by both radeon_lookup_i2c_gpio() and
radeon_atombios_i2c_init(). This avoids duplicating code
and cases where quirks were only added to one of the
functions.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Mon, 21 Nov 2011 17:10:14 +0000 (12:10 -0500)]
drm/radeon/kms: fix up gpio i2c mask bits for r4xx for real
Fixes i2c test failures when i2c_algo_bit.bit_test=1.
The hw doesn't actually require a mask, so just set it
to the default mask bits for r1xx-r4xx radeon ddc.
I missed this part the first time through.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Thomas Hellstrom [Mon, 21 Nov 2011 12:05:02 +0000 (13:05 +0100)]
ttm: Don't return the bo reserved on error path
An unlikely race could case a bo to be returned reserved on an error path.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 22 Nov 2011 20:01:00 +0000 (20:01 +0000)]
Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux into drm-fixes
* 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux: (25 commits)
drm/i915: Fix inconsistent backlight level during disabled
drm, i915: Fix memory leak in i915_gem_busy_ioctl().
drm/i915: Use DPCD value for max DP lanes.
drm/i915: Initiate DP link training only on the lanes we'll be using
drm/i915: Remove trailing white space
drm/i915: Try harder during dp pattern 1 link training
drm/i915: Make DP prepare/commit consistent with DP dpms
drm/i915: Let panel power sequencing hardware do its job
drm/i915: Treat PCH eDP like DP in most places
drm/i915: Remove link_status field from intel_dp structure
drm/i915: Move common PCH_PP_CONTROL setup to ironlake_get_pp_control
drm/i915: Module parameters using '-1' as default must be signed type
drm/i915: Turn on another required clock gating bit on gen6.
drm/i915: Turn on a required 3D clock gating bit on Sandybridge.
drm/i915: enable cacheable objects on Ivybridge
drm/i915: add constants to size fence arrays and fields
drm/i915: Ivybridge still has fences!
drm/i915: forcewake warning fixes in debugfs
drm/i915: Fix object refcount leak on mmappable size limit error path.
drm/i915: Use mode_config.mutex in ironlake_panel_vdd_work
...
Al Viro [Tue, 22 Nov 2011 17:31:21 +0000 (12:31 -0500)]
mount_subtree() pointless use-after-free
d'oh... we'd carefully pinned mnt->mnt_sb down, dropped mnt and attempt
to grab s_umount on mnt->mnt_sb. The trouble is, *mnt might've been
overwritten by now...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Tue, 22 Nov 2011 17:18:06 +0000 (09:18 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ams_delta_serio - include linux/module.h
Input: elantech - adjust hw_version detection logic
Input: i8042 - add HP Pavilion dv4s to 'notimeout' and 'nomux' blacklists
Linus Torvalds [Tue, 22 Nov 2011 17:17:30 +0000 (09:17 -0800)]
Merge git://www.linux-watchdog.org/linux-watchdog
* git://www.linux-watchdog.org/linux-watchdog:
watchdog: fix initialisation printout in s3c2410_wdt
watchdog: Don't overwrite error value in wm831x_wdt_set_timeout()
watchdog: adx_wdt.c: remove driver
Linus Torvalds [Tue, 22 Nov 2011 16:54:15 +0000 (08:54 -0800)]
Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Revert pnfs ugliness from the generic NFS read code path
SUNRPC: destroy freshly allocated transport in case of sockaddr init error
NFS: Fix a regression in the referral code
nfs: move nfs_file_operations declaration to bottom of file.c (try #2)
nfs: when attempting to open a directory, fall back on normal lookup (try #5)
Linus Torvalds [Tue, 22 Nov 2011 16:53:40 +0000 (08:53 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: remove free-space-cache.c WARN during log replay
Btrfs: sectorsize align offsets in fiemap
Btrfs: clear pages dirty for io and set them extent mapped
Btrfs: wait on caching if we're loading the free space cache
Btrfs: prefix resize related printks with btrfs:
btrfs: fix stat blocks accounting
Btrfs: avoid unnecessary bitmap search for cluster setup
Btrfs: fix to search one more bitmap for cluster setup
btrfs: mirror_num should be int, not u64
btrfs: Fix up 32/64-bit compatibility for new ioctls
Btrfs: fix barrier flushes
Btrfs: fix tree corruption after multi-thread snapshots and inode_cache flush
Linus Torvalds [Tue, 22 Nov 2011 16:22:48 +0000 (08:22 -0800)]
Merge branch 'writeback-for-linus' of git://git./linux/kernel/git/wfg/linux
* 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
writeback: remove vm_dirties and task->dirties
writeback: hard throttle 1000+ dd on a slow USB stick
mm: Make task in balance_dirty_pages() killable
Linus Torvalds [Tue, 22 Nov 2011 04:37:34 +0000 (20:37 -0800)]
Merge branch 'staging-linus' of git://git./linux/kernel/git/gregkh/staging
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: fix more ET131X build errors
staging: et131x depends on NET
staging: slicoss depends on NET
linux-next: et131x: Fix build error when CONFIG_PM_SLEEP not enabled
Linus Torvalds [Tue, 22 Nov 2011 04:37:11 +0000 (20:37 -0800)]
Merge branch 'usb-linus' of git://git./linux/kernel/git/gregkh/usb
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (48 commits)
USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c
USB: option: add PID of Huawei E173s 3G modem
OHCI: final fix for NVIDIA problems (I hope)
USB: option: release new PID for ZTE 3G modem
usb: Netlogic: Fix HC_LENGTH call in ehci-xls.c
USB: storage: ene_ub6250: fix compile warnings
USB: option: add id for 3G dongle Model VT1000 of Viettel
USB: serial: pl2303: rm duplicate id
USB: pch_udc: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
USB: pch_udc: Support new device LAPIS Semiconductor ML7831 IOH
usb-storage: Accept 8020i-protocol commands longer than 12 bytes
USB: quirks: adding more quirky webcams to avoid squeaky audio
powerpc/usb: fix type cast for address of ioremap to compatible with 64-bit
USB: at91: at91-ohci: fix set/get power
USB: cdc-acm: Fix disconnect() vs close() race
USB: add quirk for Logitech C600 web cam
USB: EHCI: fix HUB TT scheduling issue with iso transfer
USB: XHCI: resume root hubs when the controller resumes
USB: workaround for bug in old version of GCC
USB: ark3116 initialisation fix
...
Linus Torvalds [Tue, 22 Nov 2011 04:36:46 +0000 (20:36 -0800)]
Merge branch 'tty-linus' of git://git./linux/kernel/git/gregkh/tty
* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
TTY: ldisc, wait for ldisc infinitely in hangup
TTY: ldisc, move wait idle to caller
TTY: ldisc, allow waiting for ldisc arbitrarily long
Revert "tty/serial: Prevent drop of DCD on suspend for Tegra UARTs"
RS485: fix inconsistencies in the meaning of some variables
pch_uart: Fix DMA resource leak issue
serial,mfd: Fix CMSPAR setup
tty/serial: Prevent drop of DCD on suspend for Tegra UARTs
pch_uart: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
pch_uart: Support new device LAPIS Semiconductor ML7831 IOH
pch_uart: Fix hw-flow control issue
tty: hvc_dcc: Fix duplicate character inputs
jsm: Change maintainership
Linus Torvalds [Tue, 22 Nov 2011 04:36:26 +0000 (20:36 -0800)]
Merge branch 'driver-core-linus' of git://git./linux/kernel/git/gregkh/driver-core
* 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers/base/node.c: fix compilation error with older versions of gcc
uio: documentation fixups
device.h: Fix struct member documentation
Linus Torvalds [Tue, 22 Nov 2011 04:36:05 +0000 (20:36 -0800)]
Merge branch 'char-misc-linus' of git://git./linux/kernel/git/gregkh/char-misc
* 'char-misc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: ad525x_dpot: Fix AD8400 spi transfer size.
pch_phub: Fix MAC address writing issue for LAPIS ML7831
pch_phub: Improve ADE(Address Decode Enable) control
pch_phub: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
pch_phub: Support new device LAPIS Semiconductor ML7831 IOH
pcie-gadget-spear: Add "platform:" prefix for platform modalias
MAINTAINERS: add CHAR and MISC driver maintainers
Al Viro [Mon, 21 Nov 2011 22:25:37 +0000 (17:25 -0500)]
iio: fix a leak due to improper use of anon_inode_getfd()
it can fail and in that case ->release() will *not* be called...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Mon, 21 Nov 2011 21:48:28 +0000 (16:48 -0500)]
microblaze: bury asm/namei.h
altroot support has been gone for years, along with arch/*/asm/namei.h;
looks like a dummy survivor that sat it out in microblaze tree...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Mon, 21 Nov 2011 20:11:37 +0000 (12:11 -0800)]
Merge branch 'dev' of git://git./linux/kernel/git/tytso/ext4
* 'dev' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix up a undefined error in ext4_free_blocks in debugging code
ext4: add blk_finish_plug in error case of writepages.
ext4: Remove kernel_lock annotations
ext4: ignore journalled data options on remount if fs has no journal
Linus Torvalds [Mon, 21 Nov 2011 20:11:13 +0000 (12:11 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
libceph: Allocate larger oid buffer in request msgs
ceph: initialize root dentry
ceph: fix iput race when queueing inode work
Linus Torvalds [Mon, 21 Nov 2011 20:10:47 +0000 (12:10 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: Log the fact that we've given ELOOP rather than creating a loop
minixfs: kill manual hweight(), simplify
fs/minix: Verify bitmap block counts before mounting
Al Viro [Mon, 21 Nov 2011 03:52:18 +0000 (03:52 +0000)]
fix braino in um patchset (mea culpa)
wrong register returned...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chris Mason [Mon, 21 Nov 2011 14:39:11 +0000 (09:39 -0500)]
Btrfs: remove free-space-cache.c WARN during log replay
The log replay code only partially loads block groups, since
the block group caching code is able to detect and deal with
extents the logging code has pinned down.
While the logging code is pinning down block groups, there is
a bogus WARN_ON we're hitting if the code wasn't able to find
an extent in the cache. This commit removes the warning because
it can happen any time there isn't a valid free space cache
for that block group.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Yongqiang Yang [Mon, 21 Nov 2011 17:09:19 +0000 (12:09 -0500)]
ext4: fix up a undefined error in ext4_free_blocks in debugging code
sbi is not defined, so let ext4_free_blocks use EXT4_SB(sb) instead
when EXT4FS_DEBUG is defined.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
JJ Ding [Mon, 21 Nov 2011 06:26:56 +0000 (22:26 -0800)]
Input: elantech - add resolution query support for v4 hardware
It turns out that v4's firmware provides a command so we can query
the resolution. Let's use it.
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
JJ Ding [Mon, 21 Nov 2011 06:21:45 +0000 (22:21 -0800)]
Input: elantech - add support for elantech fast command
Starting with v3 hardware, the firmware supports this shorter
elantech_send_cmd. Teach the driver to use it.
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
David Howells [Tue, 16 Aug 2011 14:31:30 +0000 (15:31 +0100)]
VFS: Log the fact that we've given ELOOP rather than creating a loop
To prevent an NFS server from being used to create a directory loop in an NFS
superblock on the client, the following patch was committed:
commit
1836750115f20b774e55c032a3893e8c5bdf41ed
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue Jul 12 21:42:24 2011 -0400
Subject: fix loop checks in d_materialise_unique()
This causes ELOOP to be reported to anyone trying to access the dentry that
would otherwise cause the kernel to complete the loop.
However, no indication is given to the caller as to why an operation that ought
to work doesn't. The fault is with the kernel, which doesn't want to try and
solve the problem as it gets horrendously messy if there's another mountpoint
somewhere in the trees being spliced that can't be moved[*].
[*] The real problem is that we don't handle the excision of a subtree that
gets moved _out_ of what we can see. This can happen on the server where a
directory is merely moved between two other dirs on the same filesystem, but
where destination dir is not accessible by the client.
So, given the choice to return ELOOP rather than trying to reconfigure the
dentry tree, we should give the caller some indication of why they aren't being
allowed to make what should be a legitimate request and log a message.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Sun, 20 Nov 2011 22:59:33 +0000 (14:59 -0800)]
Merge git://git./linux/kernel/git/davem/net
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (86 commits)
ipv4: fix redirect handling
ping: dont increment ICMP_MIB_INERRORS
sky2: fix hang in napi_disable
sky2: enforce minimum ring size
bonding: Don't allow mode change via sysfs with slaves present
f_phonet: fix page offset of first received fragment
stmmac: fix pm functions avoiding sleep on spinlock
stmmac: remove spin_lock in stmmac_ioctl.
stmmac: parameters auto-tuning through HW cap reg
stmmac: fix advertising 1000Base capabilties for non GMII iface
stmmac: use mdelay on timeout of sw reset
sky2: version 1.30
sky2: used fixed RSS key
sky2: reduce default Tx ring size
sky2: rename up/down functions
sky2: pci posting issues
sky2: fix hang on shutdown (and other irq issues)
r6040: fix check against MCRO_HASHEN bit in r6040_multicast_list
MAINTAINERS: change email address for shemminger
pch_gbe: Move #include of module.h
...
Linus Torvalds [Sun, 20 Nov 2011 22:57:43 +0000 (14:57 -0800)]
Merge branch 'kvm-updates/3.2' of git://git./virt/kvm/kvm
* 'kvm-updates/3.2' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM guest: prevent tracing recursion with kvmclock
Revert "KVM: PPC: Add support for explicit HIOR setting"
KVM: VMX: Check for automatic switch msr table overflow
KVM: VMX: Add support for guest/host-only profiling
KVM: VMX: add support for switching of PERF_GLOBAL_CTRL
KVM: s390: announce SYNC_MMU
KVM: s390: Fix tprot locking
KVM: s390: handle SIGP sense running intercepts
KVM: s390: Fix RUNNING flag misinterpretation
Linus Torvalds [Sun, 20 Nov 2011 22:34:58 +0000 (14:34 -0800)]
Merge branch 'fixes' of ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm
* 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
ARM: wire up process_vm_writev and process_vm_readv syscalls
ARM: 7160/1: setup: avoid overflowing {elf,arch}_name from proc_info_list
ARM: 7158/1: add new MFP implement for NUC900
ARM: 7157/1: fix a building WARNING for nuc900
ARM: 7156/1: l2x0: fix compile error on !CONFIG_USE_OF
ARM: 7155/1: arch.h: Declare 'pt_regs' locally
ARM: 7154/1: mach-bcmring: fix build error in dma.c
ARM: 7153/1: mach-bcmring: fix build error in core.c
ARM: 7152/1: distclean: Remove generated .dtb files
ARM: 7150/1: Allow kernel unaligned accesses on ARMv6+ processors
ARM: 7149/1: spi/pl022: Enable clock in probe
Revert "ARM: 7098/1: kdump: copy kernel relocation code at the kexec prepare stage"
Linus Torvalds [Sun, 20 Nov 2011 22:33:02 +0000 (14:33 -0800)]
Merge branch 'pm-fixes' of git://git./linux/kernel/git/rafael/linux-pm
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / Suspend: Fix bug in suspend statistics update
PM / Hibernate: Fix the early termination of test modes
PM / shmobile: Fix build of sh7372_pm_init() for CONFIG_PM unset
PM Sleep: Do not extend wakeup paths to devices with ignore_children set
PM / driver core: disable device's runtime PM during shutdown
PM / devfreq: correct Kconfig dependency
PM / devfreq: fix use after free in devfreq_remove_device
PM / shmobile: Avoid restoring the INTCS state during initialization
PM / devfreq: Remove compiler error after irq.h update
PM / QoS: Properly use the WARN() macro in dev_pm_qos_add_request()
PM / Clocks: Only disable enabled clocks in pm_clk_suspend()
ARM: mach-shmobile: sh7372 A3SP no_suspend_console fix
PM / shmobile: Don't skip debugging output in pd_power_up()
Josef Bacik [Thu, 17 Nov 2011 16:34:31 +0000 (11:34 -0500)]
Btrfs: sectorsize align offsets in fiemap
We've been hitting BUG()'s in btrfs_cont_expand and btrfs_fallocate and anywhere
else that calls btrfs_get_extent while running xfstests 13 in a loop. This is
because fiemap is calling btrfs_get_extent with non-sectorsize aligned offsets,
which will end up adding mappings that are not sectorsize aligned, which will
cause problems in some cases for subsequent calls to btrfs_get_extent for
similar areas that are sectorsize aligned. With this patch I ran xfstests 13 in
a loop for a couple of hours and didn't hit the problem that I could previously
hit in at most 20 minutes. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Josef Bacik [Tue, 15 Nov 2011 14:31:24 +0000 (09:31 -0500)]
Btrfs: clear pages dirty for io and set them extent mapped
When doing the io_ctl helpers to clean up the free space cache stuff I stopped
using our normal prepare_pages stuff, which means I of course forgot to do
things like set the pages extent mapped, which will cause us all sorts of
wonderful propblems. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Josef Bacik [Mon, 14 Nov 2011 18:52:14 +0000 (13:52 -0500)]
Btrfs: wait on caching if we're loading the free space cache
We've been hitting panics when running xfstest 13 in a loop for long periods of
time. And actually this problem has always existed so we've been hitting these
things randomly for a while. Basically what happens is we get a thread coming
into the allocator and reading the space cache off of disk and adding the
entries to the free space cache as we go. Then we get another thread that comes
in and tries to allocate from that block group. Since block_group->cached !=
BTRFS_CACHE_NO it goes ahead and tries to do the allocation. We do this because
if we're doing the old slow way of caching we don't want to hold people up and
wait for everything to finish. The problem with this is we could end up
discarding the space cache at some arbitrary point in the future, which means we
could very well end up allocating space that is either bad, or when the real
caching happens it could end up thinking the space isn't in use when it really
is and cause all sorts of other problems.
The solution is to add a new flag to indicate we are loading the free space
cache from disk, and always try to cache the block group if cache->cached !=
BTRFS_CACHE_FINISHED. That way if we are loading the space cache anybody else
who tries to allocate from the block group will have to wait until it's finished
to make sure it completes successfully. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Arnd Hannemann [Sun, 20 Nov 2011 12:33:38 +0000 (07:33 -0500)]
Btrfs: prefix resize related printks with btrfs:
For the user it is confusing to find something like:
[10197.627710] new size for /dev/mapper/vg0-usr_share is
3221225472
in kernel log, because it doesn't point directly to btrfs.
This patch prefixes those messages with "btrfs:" like other btrfs
related printks.
Signed-off-by: Arnd Hannemann <arnd@arndnet.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
David Sterba [Sun, 20 Nov 2011 12:33:38 +0000 (07:33 -0500)]
btrfs: fix stat blocks accounting
Round inode bytes and delalloc bytes up to real blocksize before
converting to sector size. Otherwise eg. files smaller than 512
are reported with zero blocks due to incorrect rounding.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Li Zefan [Sun, 20 Nov 2011 12:33:38 +0000 (07:33 -0500)]
Btrfs: avoid unnecessary bitmap search for cluster setup
setup_cluster_no_bitmap() searches all the extents and bitmaps starting
from offset. Therefore if it returns -ENOSPC, all the bitmaps starting
from offset are in the bitmaps list, so it's sufficient to search from
this list in setup_cluser_bitmap().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>