OSDN Git Service
David S. Miller [Thu, 2 Dec 2010 19:52:07 +0000 (11:52 -0800)]
tcp: Implement ipv6 ->get_peer() and ->tw_get_peer().
Now ipv6 timewait recycling is fully implemented and
enabled.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 2 Dec 2010 20:14:29 +0000 (12:14 -0800)]
tcp: Add timewait recycling bits to ipv6 connect code.
This will also improve handling of ipv6 tcp socket request
backlog when syncookies are not enabled. When backlog
becomes very deep, last quarter of backlog is limited to
validated destinations. Previously only ipv4 implemented
this logic, but now ipv6 does too.
Now we are only one step away from enabling timewait
recycling for ipv6, and that step is simply filling in
the implementation of tcp_v6_get_peer() and
tcp_v6_tw_get_peer().
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 2 Dec 2010 18:59:22 +0000 (10:59 -0800)]
ipv6: Create inet6_csk_route_req().
Brother of ipv4's inet_csk_route_req().
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 2 Dec 2010 18:16:06 +0000 (10:16 -0800)]
ipv6: Add rt6_get_peer() helper.
To go along side ipv4's rt_get_peer().
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 2 Dec 2010 02:09:13 +0000 (18:09 -0800)]
timewait_sock: Create and use getpeer op.
The only thing AF-specific about remembering the timestamp
for a time-wait TCP socket is getting the peer.
Abstract that behind a new timewait_sock_ops vector.
Support for real IPV6 sockets is not filled in yet, but
curiously this makes timewait recycling start to work
for v4-mapped ipv6 sockets.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 2 Dec 2010 01:29:08 +0000 (17:29 -0800)]
inetpeer: Fix incorrect comment about inetpeer struct size.
Now with ipv6 support it is no longer less than 64 bytes.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 2 Dec 2010 01:28:18 +0000 (17:28 -0800)]
inetpeer: Kill use of inet_peer_address_t typedef.
They are verboten these days.
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Mason [Mon, 29 Nov 2010 18:02:47 +0000 (18:02 +0000)]
vxge: update driver version
Update vxge driver version
Signed-off-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Mason [Mon, 29 Nov 2010 18:02:46 +0000 (18:02 +0000)]
vxge: use strcpy for strings
Use strncpy instead of memcpy when working on strings
Signed-off-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Mason [Mon, 29 Nov 2010 18:02:45 +0000 (18:02 +0000)]
vxge: remove unnecessary printks
Remove printks for ring blocks, fifo blocks, and rx doorbell mode as
they clutter the dmesg output during modprobe and provide no useful
information.
Signed-off-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Mon, 29 Nov 2010 09:47:49 +0000 (09:47 +0000)]
ipip: add module alias for tunl0 tunnel device
If ipip is built as a module the 'ip tunnel add' command would fail because
the ipip module was not being autoloaded. Adding an alias for
the tunl0 device name cause dev_load() to autoload it when needed.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Mon, 29 Nov 2010 09:47:48 +0000 (09:47 +0000)]
gre: add module alias for gre0 tunnel device
If gre is built as a module the 'ip tunnel add' command would fail because
the ip_gre module was not being autoloaded. Adding an alias for
the gre0 device name cause dev_load() to autoload it when needed.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Mon, 29 Nov 2010 09:47:47 +0000 (09:47 +0000)]
gre: minor cleanups
Use strcpy() rather the sprintf() for the case where name is getting
generated. Fix indentation.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 29 Nov 2010 08:14:37 +0000 (08:14 +0000)]
net sched: use xps information for qdisc NUMA affinity
Allocate qdisc memory according to NUMA properties of cpus included in
xps map.
To be effective, qdisc should be (re)setup after changes
of /sys/class/net/eth<n>/queues/tx-<n>/xps_cpus
I added a numa_node field in struct netdev_queue, containing NUMA node
if all cpus included in xps_cpus share same node, else -1.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Kravkov [Wed, 1 Dec 2010 20:39:28 +0000 (12:39 -0800)]
bnx2x: Add Nic partitioning mode (57712 devices)
NIC partitioning is another flavor of multi function - having few
PCI functions share the same physical port. Unlike the currently
supported mode of multi-function which depends on the switch
configuration and uses outer-VLAN, the NPAR mode is switch independent
and uses the MAC addresses to distribute incoming packets to the different
functions. This patch adds the specific HW setting of the NPAR mode
and some distinctions between switch dependent (SD) and
switch independent (SI) multi-function (MF) modes where the configuration
is not the same.
Advance driver version to 1.60.00-6
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 29 Nov 2010 21:37:14 +0000 (13:37 -0800)]
inet: Turn ->remember_stamp into ->get_peer in connection AF ops.
Then we can make a completely generic tcp_remember_stamp()
that uses ->get_peer() as a helper, minimizing the AF specific
code and minimizing the eventual code duplication when we implement
the ipv6 side of TW recycling.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 30 Nov 2010 20:27:11 +0000 (12:27 -0800)]
ipv6: Add infrastructure to bind inet_peer objects to routes.
They are only allowed on cached ipv6 routes.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 30 Nov 2010 20:20:00 +0000 (12:20 -0800)]
inetpeer: Add inet_getpeer_v6()
Now that all of the infrastructure is in place, we can add
the ipv6 shorthand for peer creation.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 30 Nov 2010 20:12:23 +0000 (12:12 -0800)]
inetpeer: Add v6 peers tree, abstract root properly.
Add the ipv6 peer tree instance, and adapt remaining
direct references to 'v4_peers' as needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 30 Nov 2010 20:08:53 +0000 (12:08 -0800)]
inetpeer: Abstract address comparisons.
Now v4 and v6 addresses will both work properly.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 30 Nov 2010 19:54:19 +0000 (11:54 -0800)]
inetpeer: Make inet_getpeer() take an inet_peer_adress_t pointer.
And make an inet_getpeer_v4() helper, update callers.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 30 Nov 2010 19:53:55 +0000 (11:53 -0800)]
inetpeer: Introduce inet_peer_address_t.
Currently only the v4 aspect is used, but this will change.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 30 Nov 2010 19:41:59 +0000 (11:41 -0800)]
inetpeer: Abstract out the tree root accesses.
Instead of directly accessing "peer", change to code to
operate using a "struct inet_peer_base *" pointer.
This will facilitate the addition of a seperate tree for
ipv6 peer entries.
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Mon, 29 Nov 2010 07:42:02 +0000 (07:42 +0000)]
forcedeth: Use netdev_dbg for printk(KERN_DEBUG
Use the normal debugging functions.
Print mac address when using random_ether_addr.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Mon, 29 Nov 2010 07:42:01 +0000 (07:42 +0000)]
forcedeth: Remove netdev_dbg uses
These were probably just for initial driver debugging
and have not been enabled in builds in git history.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Mon, 29 Nov 2010 07:42:00 +0000 (07:42 +0000)]
forcedeth: Convert dev_printk(<level> to dev_<level>(
Use vsprintf extension %pM for a mac address in one instance.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Mon, 29 Nov 2010 07:41:59 +0000 (07:41 +0000)]
forcedeth: Separate vendor specific initializations into functions
Neaten the phy_init function by adding and calling vendor
specific functions.
object size is reduced by ~1kb:
$ size drivers/net/forcedeth.o.*
text data bss dec hex filename
83475 1848 19304 104627 198b3 drivers/net/forcedeth.o.new
84459 1848 19544 105851 19d7b drivers/net/forcedeth.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Mon, 29 Nov 2010 07:41:58 +0000 (07:41 +0000)]
forcedeth: Add function init_realtek_8211b
Deduplicate the code use for the init/reset of this device.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Mon, 29 Nov 2010 07:41:57 +0000 (07:41 +0000)]
forcedeth: Convert pr_<level> to netdev_<level>
Use netdev_<level> when a struct net_device * is available.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Mon, 29 Nov 2010 07:41:56 +0000 (07:41 +0000)]
forcedeth: Use pr_fmt and pr_<level>
Convert printks to pr_<level>.
Remove "forcedeth: " from some calls as it's now added by pr_fmt.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Mon, 29 Nov 2010 07:41:55 +0000 (07:41 +0000)]
forcedeth: Convert remaining dprintk to netdev_dbg
The remaining dprintk uses are emitted as KERN_INFO.
Change these dprintk uses to netdev_dbg.
Remove the now unused dprintk macros.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Mon, 29 Nov 2010 07:41:54 +0000 (07:41 +0000)]
forcedeth: Use print_hex_dump
Use the standard code to emit hex dumps.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Mon, 29 Nov 2010 07:41:53 +0000 (07:41 +0000)]
forcedeth: convert dprintk(KERN_DEBUG to netdev_dbg
Use the more standard macro to preface netdev->name.
Fix casting on resource use.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Mon, 29 Nov 2010 07:41:52 +0000 (07:41 +0000)]
forcedeth: Change reg_delay arguments and use
Move the printk out of reg_delay and make
the callers emit a message on error.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 29 Nov 2010 19:19:09 +0000 (11:19 -0800)]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless-next-2.6
Eric Dumazet [Sun, 28 Nov 2010 21:43:02 +0000 (21:43 +0000)]
xps: add __rcu annotations
Avoid sparse warnings : add __rcu annotations and use
rcu_dereference_protected() where necessary.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sun, 28 Nov 2010 05:43:24 +0000 (05:43 +0000)]
xps: NUMA allocations for per cpu data
store_xps_map() allocates maps that are used by single cpu, it makes
sense to use NUMA allocations.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shan Wei [Mon, 29 Nov 2010 00:14:58 +0000 (00:14 +0000)]
sctp: kill unused macros in head file
1. SCTP_CMD_NUM_VERBS,SCTP_CMD_MAX
These two macros have never been used for several years since v2.6.12-rc2.
2.sctp_port_rover,sctp_port_alloc_lock
The commit 063930 abandoned global variables of port_rover and port_alloc_lock,
but still keep two macros to refer to them.
So, remove them now.
commit
06393009000779b00a558fd2f280882cc7dc2008
Author: Stephen Hemminger <shemminger@linux-foundation.org>
Date: Wed Oct 10 17:30:18 2007 -0700
[SCTP]: port randomization
Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Scott J. Goldman [Sat, 27 Nov 2010 10:33:55 +0000 (10:33 +0000)]
vmxnet3: fix compilation when RSS is disabled
If RSS is disabled, we can ifdef out some RSS specific code. This fixes
the compile error found by Randy Dunlap.
Signed-off-by: Scott J. Goldman <scottjg@vmware.com>
Reviewed-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Fri, 26 Nov 2010 08:36:09 +0000 (08:36 +0000)]
xps: Add CONFIG_XPS
This patch adds XPS_CONFIG option to enable and disable XPS. This is
done in the same manner as RPS_CONFIG. This is also fixes build
failure in XPS code when SMP is not enabled.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Frank Blaschka [Fri, 26 Nov 2010 02:41:20 +0000 (02:41 +0000)]
qeth: l3 fix len in tso hdr
The tso hdr is longer then the regular l3 hdr. Fix the calculation
of the total len by accounting the size of the tso hdr.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Fri, 26 Nov 2010 02:41:19 +0000 (02:41 +0000)]
qeth: enable interface setup if LAN is offline
Device initialization of a qeth device contains a STARTLAN step.
This step may fail, if cable is not yet plugged in. The qeth device
stays in state HARDSETUP until cable is plugged in. This prevents
further preparational initialization steps of the qeth device and
its network interface. This patch makes sure initialization of qeth
device continues, even though cable is not yet plugged in.
Once carrier is available, qeth is notified, triggers a recovery
which results in a working network interface.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Fri, 26 Nov 2010 02:41:18 +0000 (02:41 +0000)]
drivers/s390/net: Remove unnecessary semicolons
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sachin Sant [Fri, 26 Nov 2010 02:41:17 +0000 (02:41 +0000)]
qeth lcs: convert mc rwlock to RCU
Commit
1d7138de878d1d4210727c1200193e69596f93b3
igmp: RCU conversion of in_dev->mc_list
converted rwlock to RCU.
Update the s390 network drivers(qeth & lcs) code to adapt to this change.
V2 : Changes based on suggestions given by Eric Dumazet
Signed-off-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Giuseppe Cavallaro [Mon, 29 Nov 2010 02:10:53 +0000 (18:10 -0800)]
stmmac: fix stmmac_resume removing not yet used shutdown flag
The commit to convert to use the dev_pm_ops struct
introduces a bug. The shutdown flag is not yet used
because the hibernation on memory is done by using
the freeze callback.
Thanks to Vlad for having reported it.
Reported-by: Vlad Lungu <vlad.lungu@windriver.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Szymon Janc [Sat, 27 Nov 2010 08:39:48 +0000 (08:39 +0000)]
forcedeth: use usleep_range not msleep for small sleeps
Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Szymon Janc [Sat, 27 Nov 2010 08:39:46 +0000 (08:39 +0000)]
forcedeth: do not use assignment in if conditions
Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Szymon Janc [Sat, 27 Nov 2010 08:39:45 +0000 (08:39 +0000)]
forcedeth: include <linux/io.h> and <linux/uaccess.h> instead of <asm/io.h> and <asm/uaccess.h> as suggested by checkpatch
Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Szymon Janc [Sat, 27 Nov 2010 08:39:44 +0000 (08:39 +0000)]
forcedeth: remove unnecessary checks before kfree
Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Szymon Janc [Sat, 27 Nov 2010 08:39:43 +0000 (08:39 +0000)]
forcedeth: fix multiple code style issues
Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Sun, 28 Nov 2010 00:02:59 +0000 (00:02 +0000)]
zd1211rw: document need for kmalloc cast
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Sat, 27 Nov 2010 23:05:45 +0000 (23:05 +0000)]
vxge: remove unnecessary [kv][mcz]alloc casts
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Sat, 27 Nov 2010 23:05:44 +0000 (23:05 +0000)]
qlcnic: remove unnecessary [kv][mcz]alloc casts
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Sat, 27 Nov 2010 23:05:43 +0000 (23:05 +0000)]
netxen: remove unnecessary [kv][mcz]alloc casts
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Breno Leitao [Thu, 25 Nov 2010 07:53:55 +0000 (07:53 +0000)]
cxgb3: Removing unused return variable
Currently the ret variable is not used for anything other than
receive the value of the t3_adapter_error(), which will always be 0,
because the reset parameter is 0.
Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jozsef Kadlecsik [Thu, 25 Nov 2010 03:15:07 +0000 (03:15 +0000)]
ipv6: Prepare the tree for un-inlined jhash.
jhash is widely used in the kernel and because the functions
are inlined, the cost in size is significant. Also, the new jhash
functions are slightly larger than the previous ones so better un-inline.
As a preparation step, the calls to the internal macros are replaced
with the plain jhash function calls.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Timo Teräs [Tue, 23 Nov 2010 04:03:45 +0000 (04:03 +0000)]
xfrm: fix gre key endianess
fl->fl_gre_key is network byte order contrary to fl->fl_icmp_*.
Make xfrm_flowi_{s|d}port return network byte order values for gre
key too.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonas Bonn [Thu, 25 Nov 2010 02:30:32 +0000 (02:30 +0000)]
ethoc: remove division from loops
Calculating the BD entry using a modulus operation isn't optimal, especially
inside the loop. This patch removes the modulus operations in favour of:
i) simply checking for wrapping in the case of cur_rx
ii) forcing num_tx to be a power of two and using it to mask out the
entry from cur_tx
The also prevents possible issues related overflow of the cur_rx and cur_tx
counters.
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonas Bonn [Thu, 25 Nov 2010 02:30:31 +0000 (02:30 +0000)]
ethoc: fix function return type
update_ethoc_tx_stats doesn't need to return anything so make its return
type void in order to avoid an unnecessary cast when the function is called.
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonas Bonn [Thu, 25 Nov 2010 02:30:30 +0000 (02:30 +0000)]
ethoc: rework mdio read/write
MDIO read and write were checking whether a timeout had expired to determine
whether to recheck the result of the MDIO operation. Under heavy CPU usage,
however, it was possible for the timeout to expire before the routine got
around to be able to check a second time even, thus erroneousy returning an
-EBUSY.
This patch changes the the MDIO IO routines to try up to five times to complete
the operation before giving up, thus lessening the dependency on CPU load.
This resolves a problem whereby a ping flood would keep the CPU so busy that
the above problem would manifest itself; the MDIO command to check link status
would fail and the interface would erroneously be shut down.
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonas Bonn [Thu, 25 Nov 2010 02:30:29 +0000 (02:30 +0000)]
ethoc: rework interrupt handling
The old interrupt handling was incorrect in that it did not account for the
fact that the interrupt source bits get set irregardless of whether or not
their corresponding mask is set. This patch fixes that by masking off the
source bits for masked interrupts.
Furthermore, the handling of transmission events is moved to the NAPI polling
handler alongside the reception handler, thus preventing a whole bunch of
interrupts during heavy traffic.
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonas Bonn [Thu, 25 Nov 2010 02:30:28 +0000 (02:30 +0000)]
ethoc: Double check pending RX packet
An interrupt may occur between checking bd.stat and clearing the
interrupt source register which would result in the packet going totally
unnoticed as the interrupt will be missed. Double check bd.stat after
clearing the interrupt source register to guard against such an
occurrence.
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adam Edvardsson [Thu, 25 Nov 2010 02:30:27 +0000 (02:30 +0000)]
ethoc: enable interrupts after napi_complete
Occasionally, it seems that some race is causing the interrupts to not be
reenabled otherwise with the end result that networking just stops working.
Enabling interrupts after calling napi_complete is more in line with what
other drivers do.
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonas Bonn [Thu, 25 Nov 2010 02:30:26 +0000 (02:30 +0000)]
ethoc: remove unused spinlock
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonas Bonn [Thu, 25 Nov 2010 02:30:25 +0000 (02:30 +0000)]
ethoc: Add device tree configuration
This patch adds the ability to describe ethernet devices via a flattened
device tree. As device tree remains an optional feature, these bits all
need to be guarded by CONFIG_OF ifdefs.
MAC address is settable via the device tree parameter "local-mac-address";
however, the selection of the phy id is limited to probing, for now.
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
andrew hendry [Thu, 25 Nov 2010 02:18:45 +0000 (02:18 +0000)]
X25 remove bkl in call user data length ioctl
Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
andrew hendry [Thu, 25 Nov 2010 02:18:43 +0000 (02:18 +0000)]
X25 remove bkl from causediag ioctls
Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
andrew hendry [Thu, 25 Nov 2010 02:18:40 +0000 (02:18 +0000)]
X25 remove bkl from calluserdata ioctls
Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
andrew hendry [Thu, 25 Nov 2010 02:18:35 +0000 (02:18 +0000)]
X25 remove bkl in facility ioctls
Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
andrew hendry [Thu, 25 Nov 2010 02:18:15 +0000 (02:18 +0000)]
X25 remove bkl in subscription ioctls
Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladislav Zolotarov [Sun, 28 Nov 2010 00:23:35 +0000 (00:23 +0000)]
bnx2x: Use helpers instead of direct access to the shinfo(skb) fields
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 24 Nov 2010 13:48:55 +0000 (13:48 +0000)]
bnx2: Remove config access to non-standard registers
In KVM passthrough mode, the driver may not have config access to
non-standard registers. The BNX2_PCICFG_MISC_CONFIG config register
access to setup mailbox swapping can be done using MMIO.
Update version to 2.0.20.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eddie Wai [Wed, 24 Nov 2010 13:48:54 +0000 (13:48 +0000)]
bnx2: Fix reset bug on 5709
The 5709 chip requires the BNX2_MISC_NEW_CORE_CTL_DMA_ENABLE bit to be
cleared and polling for pending DMAs to complete before chip reset.
Without this step, we've seen NMIs during repeated resets of the chip.
Signed-off-by: Eddie Wai <waie@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Fastabend [Wed, 24 Nov 2010 13:14:50 +0000 (13:14 +0000)]
8021q: vlan device is lockless do not transfer real_num_{tx|rx}_queues
Now that the vlan device is lockless and single queue do not
transfer the real num queues. This is causing a BUG_ON to occur.
kernel BUG at net/8021q/vlan.c:345!
Call Trace:
[<
ffffffff813fd6e8>] ? fib_rules_event+0x28/0x1b0
[<
ffffffff814ad2b5>] notifier_call_chain+0x55/0x80
[<
ffffffff81089156>] raw_notifier_call_chain+0x16/0x20
[<
ffffffff813e5af7>] call_netdevice_notifiers+0x37/0x70
[<
ffffffff813e6756>] netdev_features_change+0x16/0x20
[<
ffffffffa02995be>] ixgbe_fcoe_enable+0xae/0x100 [ixgbe]
[<
ffffffffa01da06a>] vlan_dev_fcoe_enable+0x2a/0x30 [8021q]
[<
ffffffffa02d08c3>] fcoe_create+0x163/0x630 [fcoe]
[<
ffffffff811244d5>] ? mmap_region+0x255/0x5a0
[<
ffffffff81080ef0>] param_attr_store+0x50/0x80
[<
ffffffff810809b6>] module_attr_store+0x26/0x30
[<
ffffffff811b9db2>] sysfs_write_file+0xf2/0x180
[<
ffffffff8114fc88>] vfs_write+0xc8/0x190
[<
ffffffff81150621>] sys_write+0x51/0x90
[<
ffffffff8100c0b2>] system_call_fastpath+0x16/0x1b
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 23 Nov 2010 10:42:02 +0000 (10:42 +0000)]
net: add netif_tx_queue_frozen_or_stopped
When testing struct netdev_queue state against FROZEN bit, we also test
XOFF bit. We can test both bits at once and save some cycles.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shan Wei [Wed, 24 Nov 2010 21:47:56 +0000 (21:47 +0000)]
ipv6: kill two unused macro definition
1. IPV6_TLV_TEL_DST_SIZE
This has not been using for several years since created.
2. RT6_INFO_LEN
commit
33120b30 kill all RT6_INFO_LEN's references, but only this definition remained.
commit
33120b30cc3b8665204d4fcde7288638b0dd04d5
Author: Alexey Dobriyan <adobriyan@sw.ru>
Date: Tue Nov 6 05:27:11 2007 -0800
[IPV6]: Convert /proc/net/ipv6_route to seq_file interface
Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Uwe Kleine-König [Tue, 23 Nov 2010 22:57:47 +0000 (22:57 +0000)]
net: add some KERN_CONT markers to continuation lines
Cc: netdev@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rajesh Borundia [Tue, 23 Nov 2010 03:08:27 +0000 (03:08 +0000)]
netxen: avoid using reset_devices as it may become obsolete
In kdump environment do not depend on reset_devices
parameter to reset the device as the parameter may become obsolete.
Instead use an adapter specific mechanism to determine if the device
needs a reset.
Driver maintains a count of number of pci functions probed
and decrements the count when remove handler of that pci function
is called. If the first probe, probe of function 0,
detects the count as non zero then reset the device.
Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rajesh Borundia [Tue, 23 Nov 2010 01:25:21 +0000 (01:25 +0000)]
qlcnic: avoid using reset_devices as it may become obsolete.
In kdump environment do not depend upon reset_devices parameter
to reset the pci function as this parameter may become obsolete.
Instead use an adapter specific mechanism to determine if the pci
function needs to be reset.
Per function refcount is maintained in driver, which is set in probe
and reset in remove handler of adapter. If the probe detects the count
as non zero then reset the function.
Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shan Wei [Mon, 22 Nov 2010 23:00:42 +0000 (23:00 +0000)]
sctp: kill unused macro definition
These macros have been existed for several years since v2.6.12-rc2.
But they never be used. So remove them now.
Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Mon, 22 Nov 2010 01:31:54 +0000 (01:31 +0000)]
rtnl: make link af-specific updates atomic
As David pointed out correctly, updates to af-specific attributes
are currently not atomic. If multiple changes are requested and
one of them fails, previous updates may have been applied already
leaving the link behind in a undefined state.
This patch splits the function parse_link_af() into two functions
validate_link_af() and set_link_at(). validate_link_af() is placed
to validate_linkmsg() check for errors as early as possible before
any changes to the link have been made. set_link_af() is called to
commit the changes later.
This method is not fail proof, while it is currently sufficient
to make set_link_af() inerrable and thus 100% atomic, the
validation function method will not be able to detect all error
scenarios in the future, there will likely always be errors
depending on states which are f.e. not protected by rtnl_mutex
and thus may change between validation and setting.
Also, instead of silently ignoring unknown address families and
config blocks for address families which did not register a set
function the errors EAFNOSUPPORT respectively EOPNOSUPPORT are
returned to avoid comitting 4 out of 5 update requests without
notifying the user.
Signed-off-by: Thomas Graf <tgraf@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 22 Nov 2010 00:15:06 +0000 (00:15 +0000)]
drivers/net: use vzalloc()
Use vzalloc() and vzalloc_node() in net drivers
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sathya Perla [Sun, 21 Nov 2010 23:25:50 +0000 (23:25 +0000)]
be2net: adding support for Lancer family of CNAs
Key changes are:
- EQ ids are not assigned consecutively in Lancer. So, fix mapping of MSIx
vector to EQ-id.
- BAR mapping and some req locations different for Lancer.
- TCP,UDP,IP checksum fields must be compulsorily set in TX wrb for TSO in
Lancer.
- CEV_IST reg not present in Lancer; so, peek into event queue to check for
new entries
- cq_create and mcc_create cmd interface is different for Lancer; handle
accordingly
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John W. Linville [Wed, 24 Nov 2010 21:49:20 +0000 (16:49 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next-2.6 into for-davem
Felix Fietkau [Sat, 20 Nov 2010 02:08:48 +0000 (03:08 +0100)]
ath9k_hw: remove ath9k_hw_stoppcurecv
It is no longer used anywhere
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rajkumar Manoharan [Fri, 19 Nov 2010 11:23:22 +0000 (16:53 +0530)]
ath9k_htc: Identify devices using driver_info
Categorize AR7010 & AR9287 devices based on driver_info
of usb_device_id, instead of PIDs. This avoids per-device cases
and minimize code changes for new device addition.
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rajkumar Manoharan [Fri, 19 Nov 2010 11:23:21 +0000 (16:53 +0530)]
ath9k_hw: Fix eeprom offset for AR9287 devices (PCI/USB)
AR9287 devices (PCI/USB) use different eeprom start location
to read nvram. New devices might endup with same devid. So use
driver_info to set offset, instead of devid. driver_info is
valid for HTC devices alone which is filled in usb_device_id.
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rajkumar Manoharan [Fri, 19 Nov 2010 11:23:20 +0000 (16:53 +0530)]
ath9k_htc: Add driver_info in usb device list
Added driver_info to identify AR7010, R9287 HTC devices.
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rajkumar Manoharan [Fri, 19 Nov 2010 11:23:19 +0000 (16:53 +0530)]
ath: Add a driver_info bitmask field
The driver_info stores the device category information which
is used to load appropriate device firmware, select firmware offset
and eeprom starting location. The driver_info is accessed across
ath9k_htc and ath9k_hw. Hence placed under common structure.
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Wey-Yi Guy [Tue, 23 Nov 2010 18:58:56 +0000 (10:58 -0800)]
iwlwifi: advance power management support
For 6000g2b and up, adding advance power management support
for better power consumption
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Wey-Yi Guy [Tue, 23 Nov 2010 18:58:55 +0000 (10:58 -0800)]
iwlwifi: power management checking for shadow register
If shadow register is enable, modify the power management
command to inform uCode
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Wey-Yi Guy [Tue, 23 Nov 2010 18:58:54 +0000 (10:58 -0800)]
iwlwifi: consider BT for power management
Check the BT PSPoll flag when fill PM command to uCode
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Wey-Yi Guy [Tue, 23 Nov 2010 18:58:53 +0000 (10:58 -0800)]
iwlwifi: add more power management flags
Adding additional power management option available for the device.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Wey-Yi Guy [Tue, 23 Nov 2010 18:58:52 +0000 (10:58 -0800)]
iwlagn: name change for BT config flag
Bit 7 of BT config flag is used to enable/disable PSPoll sync.
Make the name to match it.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Wed, 24 Nov 2010 07:10:06 +0000 (08:10 +0100)]
mac80211: implement packet loss notification
For drivers that have accurate TX status reporting
we can report the number of consecutive lost packets
to userspace using the new cfg80211 CQM event. The
threshold is fixed right now, this may need to be
improved in the future.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Wed, 24 Nov 2010 07:10:05 +0000 (08:10 +0100)]
cfg80211: allow using CQM event to notify packet loss
This adds the ability for drivers to use CQM events
to notify about packet loss for specific stations
(which could be the AP for the managed mode case).
Since the threshold might be determined by the
driver (it isn't passed in right now) it will be
passed out of the driver to userspace in the event.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Bruno Randolf [Wed, 24 Nov 2010 05:34:41 +0000 (14:34 +0900)]
cfg80211: Add documentation for antenna ops
Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis R. Rodriguez [Tue, 23 Nov 2010 23:05:02 +0000 (15:05 -0800)]
mac80211: avoid aggregation for VO traffic
This should help with latency issues which can happen when
using aggregation.
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Matt Smith <matt.smith@atheros.com>
Cc: Senthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis R. Rodriguez [Tue, 23 Nov 2010 23:05:01 +0000 (15:05 -0800)]
ath9k: avoid aggregation for VO traffic
This should help with latency issues which can happen when
using aggregation.
Cc: Matt Smith <matt.smith@atheros.com>
Cc: Senthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Fietkau [Tue, 23 Nov 2010 02:10:32 +0000 (03:10 +0100)]
mac80211: reduce the number of retries for nullfunc probing
Since nullfunc frames are transmitted as unicast frames, they're more
reliable than the broadcast probe requests, so we need fewer retries
to figure out whether the AP is really gone.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>