OSDN Git Service
Peter Maydell [Mon, 29 Oct 2018 15:15:14 +0000 (15:15 +0000)]
Merge remote-tracking branch 'remotes/kraxel/tags/audio-
20181029-pull-request' into staging
audio: qom cleanups.
# gpg: Signature made Mon 29 Oct 2018 13:37:09 GMT
# gpg: using RSA key
4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/audio-
20181029-pull-request:
audio: use TYPE_MV88W8618_AUDIO instead of hardcoded string
audio: use object link instead of qdev property to pass wm8750 reference
audio: use TYPE_WM8750 instead of a hardcoded string
hw: AC97: make it more QOMconventional
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 29 Oct 2018 12:59:15 +0000 (12:59 +0000)]
Merge remote-tracking branch 'remotes/kraxel/tags/vga-
20181029-pull-request' into staging
vga: two fixes.
# gpg: Signature made Mon 29 Oct 2018 12:46:20 GMT
# gpg: using RSA key
4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/vga-
20181029-pull-request:
vga_int: remove unused function protype
qxl: store channel id in qxl->id
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mao Zhongyi [Mon, 22 Oct 2018 07:40:50 +0000 (15:40 +0800)]
audio: use TYPE_MV88W8618_AUDIO instead of hardcoded string
Cc: Jan Kiszka <jan.kiszka@web.de>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id:
20181022074050.19638-4-maozhongyi@cmss.chinamobile.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Mao Zhongyi [Mon, 22 Oct 2018 07:40:49 +0000 (15:40 +0800)]
audio: use object link instead of qdev property to pass wm8750 reference
According to qdev-properties.h, properties of pointer type should
be avoided, it seems a link type property is a good substitution.
Cc: Jan Kiszka <jan.kiszka@web.de>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id:
20181022074050.19638-3-maozhongyi@cmss.chinamobile.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Mao Zhongyi [Mon, 22 Oct 2018 07:40:48 +0000 (15:40 +0800)]
audio: use TYPE_WM8750 instead of a hardcoded string
Cc: Jan Kiszka <jan.kiszka@web.de>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id:
20181022074050.19638-2-maozhongyi@cmss.chinamobile.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Li Qiang [Sat, 13 Oct 2018 06:08:09 +0000 (23:08 -0700)]
hw: AC97: make it more QOMconventional
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id:
20181013060809.52496-1-liq3ea@163.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
yuchenlin [Mon, 22 Oct 2018 08:00:53 +0000 (16:00 +0800)]
vga_int: remove unused function protype
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id:
20181022080053.9379-1-yuchenlin@synology.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 12 Oct 2018 11:45:40 +0000 (13:45 +0200)]
qxl: store channel id in qxl->id
See qemu_spice_add_display_interface(), the console index is also used
as channel id. So put that into the qxl->id field too.
In typical use cases (one primary qxl-vga device, optionally one or more
secondary qxl devices, no non-qxl display devices) this doesn't change
anything.
With this in place the qxl->id can not be used any more to figure
whenever a given device is primary (with vga compat mode) or secondary.
So add a bool to track this.
Cc: spice-devel@lists.freedesktop.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id:
20181012114540.27829-1-kraxel@redhat.com
Peter Maydell [Sat, 27 Oct 2018 18:55:08 +0000 (19:55 +0100)]
Merge remote-tracking branch 'remotes/famz/tags/testing-pull-request' into staging
Testing patches
One fix for mingw build and some improvements in VM based testing, many thanks
to Paolo and Phil.
# gpg: Signature made Fri 26 Oct 2018 15:15:13 BST
# gpg: using RSA key
CA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/testing-pull-request:
tests/vm: Do not abuse parallelism when HOST != TARGET architecture
tests/vm: Do not use -enable-kvm if HOST != TARGET architecture
tests/vm: Let kvm_available() work in cross environments
tests/vm: Add a BaseVM::arch property
tests/vm: Display remaining seconds to wait for a VM to start
tests/vm: Do not use the -smp option with a single cpu
tests/vm: Do not abuse parallelism when KVM is not available
tests/vm: Extract the kvm_available() handy function
tests: docker: update test-mingw for GTK+ 2.0 removal
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 26 Oct 2018 19:16:38 +0000 (20:16 +0100)]
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-oct-2018-part-3' into staging
MIPS queue for October 2018 - part 3
# gpg: Signature made Thu 25 Oct 2018 21:14:02 BST
# gpg: using RSA key
D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-oct-2018-part-3:
target/mips: Add disassembler support for nanoMIPS
target/mips: Implement emulation of nanoMIPS EVA instructions
target/mips: Add nanoMIPS CRC32 instruction pool
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Sat, 13 Oct 2018 00:40:33 +0000 (02:40 +0200)]
tests/vm: Do not abuse parallelism when HOST != TARGET architecture
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20181013004034.6968-9-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Philippe Mathieu-Daudé [Sat, 13 Oct 2018 00:40:32 +0000 (02:40 +0200)]
tests/vm: Do not use -enable-kvm if HOST != TARGET architecture
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20181013004034.6968-8-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Philippe Mathieu-Daudé [Sat, 13 Oct 2018 00:40:31 +0000 (02:40 +0200)]
tests/vm: Let kvm_available() work in cross environments
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20181013004034.6968-7-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Philippe Mathieu-Daudé [Sat, 13 Oct 2018 00:40:30 +0000 (02:40 +0200)]
tests/vm: Add a BaseVM::arch property
The 'arch' property gives a hint on which architecture the guest image runs.
This can be use to select the correct QEMU binary path.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20181013004034.6968-6-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Philippe Mathieu-Daudé [Sat, 13 Oct 2018 00:40:29 +0000 (02:40 +0200)]
tests/vm: Display remaining seconds to wait for a VM to start
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20181013004034.6968-5-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Philippe Mathieu-Daudé [Sat, 13 Oct 2018 00:40:28 +0000 (02:40 +0200)]
tests/vm: Do not use the -smp option with a single cpu
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20181013004034.6968-4-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Philippe Mathieu-Daudé [Sat, 13 Oct 2018 00:40:27 +0000 (02:40 +0200)]
tests/vm: Do not abuse parallelism when KVM is not available
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20181013004034.6968-3-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Philippe Mathieu-Daudé [Sat, 13 Oct 2018 00:40:26 +0000 (02:40 +0200)]
tests/vm: Extract the kvm_available() handy function
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20181013004034.6968-2-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Paolo Bonzini [Thu, 18 Oct 2018 18:10:03 +0000 (20:10 +0200)]
tests: docker: update test-mingw for GTK+ 2.0 removal
--with-gtkabi does not exist anymore; remove it from the configure invocation.
Fixes:
89d85cde75143325205e332dd97bf1bb8402d7c1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
1539886203-33670-1-git-send-email-pbonzini@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Aleksandar Markovic [Wed, 24 Oct 2018 15:41:49 +0000 (17:41 +0200)]
target/mips: Add disassembler support for nanoMIPS
Add disassembler support for nanoMIPS.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Matthew Fortune <matthew.fortune@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Dimitrije Nikolic [Wed, 24 Oct 2018 16:51:04 +0000 (18:51 +0200)]
target/mips: Implement emulation of nanoMIPS EVA instructions
Implement emulation of nanoMIPS EVA instructions. They are all
part of P.LS.E0 instruction pool, or one of its subpools.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Dimitrije Nikolic <dnikolic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Aleksandar Markovic [Wed, 24 Oct 2018 16:58:42 +0000 (18:58 +0200)]
target/mips: Add nanoMIPS CRC32 instruction pool
Add nanoMIPS CRC32 instruction pool.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Peter Maydell [Thu, 25 Oct 2018 19:17:12 +0000 (20:17 +0100)]
Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging
Machine queue, 2018-10-25
* sysbus init/realize cleanups
(Cédric Le Goater, Philippe Mathieu-Daudé)
* memory-device refactoring (David Hildenbrand)
* -smp: deprecate incorrect CPUs topology (Igor Mammedov)
* -numa parsing cleanups (Markus Armbruster)
* Fix hostmem-file memory leak (Zhang Yi)
* Typo fix (Li Qiang)
# gpg: Signature made Thu 25 Oct 2018 14:31:46 BST
# gpg: using RSA key
2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/machine-next-pull-request: (43 commits)
net: xgmac: convert SysBus init method to a realize method
net: stellaris_enet: add a reset method
net: stellaris_enet: convert SysBus init method to a realize method
net: smc91c111: convert SysBus init method to a realize method
net: opencores_eth: convert SysBus init method to a realize method
net: mipsnet: convert SysBus init method to a realize method
net: milkymist_minimac2: convert SysBus init method to a realize method
net: lance: convert SysBus init method to a realize method
net: lan9118: convert SysBus init method to a realize method
net: etraxfs_eth: add a reset method
net: etraxfs_eth: convert SysBus init method to a realize method
memory-device: trace when pre_plugging/plugging/unplugging
memory-device: complete factoring out unplug handling
memory-device: complete factoring out plug handling
memory-device: complete factoring out pre_plug handling
memory-device: add device class function set_addr()
memory-device: drop get_region_size()
memory-device: factor out get_memory_region() from pc-dimm
memory-device: add and use memory_device_get_region_size()
memory-device: document MemoryDeviceClass
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 25 Oct 2018 16:41:03 +0000 (17:41 +0100)]
Merge remote-tracking branch 'remotes/riscv/tags/riscv-for-master-3.1-sf0' into staging
First RISC-V Patch Set for the 3.1 Soft Freeze
This pull request contains a handful of patches that have been floating
around various trees for a while but haven't made it upstream. These
patches all appear quite safe. They're all somewhat independent from
each other:
* One refactors our IRQ management function to allow multiple interrupts
to be raised an once. This patch has no functional difference.
* Cleaning up the op_helper/cpu_helper split. This patch has no
functional difference.
* Updates to various constants to keep them in sync with the latest ISA
specification and to remove some non-standard bits that snuck in.
* A fix for a memory leak in the PLIC driver.
* A fix to our device tree handling to avoid provinging a NULL string.
I've given this my standard test: building the port, booting a Fedora
root filesytem on the latest Linux tag, and then shutting down that
image. Essentially I'm just following the QEMU RISC-V wiki page's
instructions. Everything looks fine here.
We have a lot more outstanding patches so I'll definately be submitting
another PR for the soft freeze.
# gpg: Signature made Wed 17 Oct 2018 21:17:52 BST
# gpg: using RSA key
EF4CA1502CCBAB41
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>"
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/riscv/tags/riscv-for-master-3.1-sf0:
RISC-V: Don't add NULL bootargs to device-tree
RISC-V: Add missing free for plic_hart_config
RISC-V: Update CSR and interrupt definitions
RISC-V: Move non-ops from op_helper to cpu_helper
RISC-V: Allow setting and clearing multiple irqs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 24 Oct 2018 21:08:42 +0000 (22:08 +0100)]
Merge remote-tracking branch 'remotes/berrange/tags/qcrypto-next-pull-request' into staging
Improve performance of XTS cipher mode impl
The XTS cipher mode performance is approximately doubled and test
coverage is improved.
# gpg: Signature made Wed 24 Oct 2018 19:05:08 BST
# gpg: using RSA key
BE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/qcrypto-next-pull-request:
crypto: add testing for unaligned buffers with XTS cipher mode
crypto: refactor XTS cipher mode test suite
crypto: annotate xts_tweak_encdec as inlineable
crypto: convert xts_mult_x to use xts_uint128 type
crypto: convert xts_tweak_encdec to use xts_uint128 type
crypto: introduce a xts_uint128 data type
crypto: remove code duplication in tweak encrypt/decrypt
crypto: expand algorithm coverage for cipher benchmark
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Daniel P. Berrangé [Tue, 16 Oct 2018 09:17:12 +0000 (10:17 +0100)]
crypto: add testing for unaligned buffers with XTS cipher mode
Validate that the XTS cipher mode will correctly operate with plain
text, cipher text and IV buffers that are not 64-bit aligned.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Daniel P. Berrangé [Mon, 15 Oct 2018 17:03:41 +0000 (18:03 +0100)]
crypto: refactor XTS cipher mode test suite
The current XTS test overloads two different tests in a single function
making the code a little hard to follow. Split it into distinct test
cases.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Daniel P. Berrangé [Tue, 9 Oct 2018 09:50:43 +0000 (10:50 +0100)]
crypto: annotate xts_tweak_encdec as inlineable
Encouraging the compiler to inline xts_tweak_encdec increases the
performance for xts-aes-128 when built with gcrypt:
Encrypt: 545 MB/s -> 580 MB/s
Decrypt: 568 MB/s -> 602 MB/s
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Daniel P. Berrangé [Tue, 9 Oct 2018 09:55:14 +0000 (10:55 +0100)]
crypto: convert xts_mult_x to use xts_uint128 type
Using 64-bit arithmetic increases the performance for xts-aes-128
when built with gcrypt:
Encrypt: 355 MB/s -> 545 MB/s
Decrypt: 362 MB/s -> 568 MB/s
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Daniel P. Berrangé [Tue, 9 Oct 2018 09:50:43 +0000 (10:50 +0100)]
crypto: convert xts_tweak_encdec to use xts_uint128 type
Using 64-bit arithmetic increases the performance for xts-aes-128
when built with gcrypt:
Encrypt: 272 MB/s -> 355 MB/s
Decrypt: 275 MB/s -> 362 MB/s
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Daniel P. Berrangé [Tue, 9 Oct 2018 09:45:41 +0000 (10:45 +0100)]
crypto: introduce a xts_uint128 data type
The new type is designed to allow use of 64-bit arithmetic instead
of operating 1-byte at a time. The following patches will use this to
improve performance.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Daniel P. Berrangé [Mon, 8 Oct 2018 13:13:28 +0000 (14:13 +0100)]
crypto: remove code duplication in tweak encrypt/decrypt
The tweak encrypt/decrypt functions are identical except for the
comments, so can be merged. Profiling data shows that the compiler is
in fact already merging the two merges in the object files.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Daniel P. Berrangé [Mon, 8 Oct 2018 13:12:04 +0000 (14:12 +0100)]
crypto: expand algorithm coverage for cipher benchmark
Add testing coverage for AES with XTS, ECB and CTR modes
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Peter Maydell [Wed, 24 Oct 2018 15:31:40 +0000 (16:31 +0100)]
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-oct-2018-part-2-v2' into staging
MIPS queue for October 2018 - part 2 - v2
# gpg: Signature made Wed 24 Oct 2018 14:22:54 BST
# gpg: using RSA key
D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-oct-2018-part-2-v2: (33 commits)
target/mips: Fix decoding of ALIGN and DALIGN instructions
target/mips: Fix the title of translate.c
linux-user/mips: Recognize the R5900 CPU model
target/mips: Define the R5900 CPU
tests/tcg/mips: Add tests for R5900 DIVU1
tests/tcg/mips: Add tests for R5900 DIV1
tests/tcg/mips: Add tests for R5900 MTLO1 and MTHI1
tests/tcg/mips: Add tests for R5900 MFLO1 and MFHI1
tests/tcg/mips: Add tests for R5900 three-operand MULTU1
tests/tcg/mips: Add tests for R5900 three-operand MULT1
tests/tcg/mips: Add tests for R5900 three-operand MULTU
tests/tcg/mips: Add tests for R5900 three-operand MULT
target/mips: Make R5900 DMULT[U], DDIV[U], LL[D] and SC[D] user only
target/mips: Support R5900 MOVN, MOVZ and PREF instructions from MIPS IV
target/mips: Support R5900 DIV1 and DIVU1 instructions
target/mips: Support R5900 MFLO1, MTLO1, MFHI1 and MTHI1 instructions
target/mips: Support R5900 three-operand MULT1 and MULTU1 instructions
target/mips: Support R5900 three-operand MULT and MULTU instructions
target/mips: Add a placeholder for R5900 MMI3 instruction subclass
target/mips: Add a placeholder for R5900 MMI2 instruction subclass
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 24 Oct 2018 15:01:05 +0000 (16:01 +0100)]
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2018-10-24' into staging
- Disable migration-test with TCG on s390x (since there are known problems)
- Small Makefile improvements
- More modern shell scripting changes (use $() instead of ``)
- Add a configure option to disable AVX2
# gpg: Signature made Wed 24 Oct 2018 08:04:33 BST
# gpg: using RSA key
2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>"
# gpg: aka "Thomas Huth <thuth@redhat.com>"
# gpg: aka "Thomas Huth <huth@tuxfamily.org>"
# gpg: aka "Thomas Huth <th.huth@posteo.de>"
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2018-10-24:
configure: Provide option to explicitly disable AVX2
po/Makefile: Modern shell scripting (use $() instead of ``)
debian-bootstrap.pre: Modern shell scripting (use $() instead of ``)
configs: Add a CONFIG_SMC37C669 switch for the "smc37c669-superio" device
hw/core: Move null-machine into the common-obj list
tests/migration-test: Disable s390x test when running with TCG
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Aleksandar Markovic [Mon, 22 Oct 2018 11:19:25 +0000 (13:19 +0200)]
target/mips: Fix decoding of ALIGN and DALIGN instructions
Opcode for ALIGN and DALIGN must be in fact ranges of opcodes, to
allow paremeter 'bp' to occupy two and three bits, respectively.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Aleksandar Markovic [Mon, 22 Oct 2018 11:09:35 +0000 (13:09 +0200)]
target/mips: Fix the title of translate.c
Replace MIPS32 with MIPS, since the file covers all generations
of MIPS architectures.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:44:58 +0000 (17:44 +0200)]
linux-user/mips: Recognize the R5900 CPU model
This kind of ELF for the R5900 relies on an IEEE 754-1985 compliant FPU.
The R5900 FPU hardware is noncompliant and it is therefore emulated in
software by the Linux kernel. QEMU emulates a compliant FPU accordingly.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:44:46 +0000 (17:44 +0200)]
target/mips: Define the R5900 CPU
The primary purpose of this change is to support programs compiled by
GCC for the R5900 target and thereby run R5900 Linux distributions, for
example Gentoo.
GCC in version 7.3, by itself, by inspection of the GCC source code
and inspection of the generated machine code, for the R5900 target,
only emits two instructions that are specific to the R5900: the three-
operand MULT and MULTU. GCC and libc also emit certain MIPS III
instructions that are not part of the R5900 ISA. They are normally
trapped and emulated by the Linux kernel, and therefore need to be
treated accordingly by QEMU.
A program compiled by GCC is taken to mean source code compiled by GCC
under the restrictions above. One can, with the apparent limitations,
with a bit of effort obtain a fully functioning operating system such
as R5900 Gentoo. Strictly speaking, programs need not be compiled by
GCC to make use of this change.
Instructions and other facilities of the R5900 not implemented by this
change are intended to signal provisional exceptions. One such example
is the FPU that is not compliant with IEEE 754-1985 in system mode. It
is therefore provisionally disabled. In user space the FPU is trapped
and emulated by IEEE 754-1985 compliant software in the kernel, and
this is handled accordingly by QEMU. Another example is the 93
multimedia instructions specific to the R5900 that generate provisional
reserved instruction exception signals.
One of the benefits of running a Linux distribution under QEMU is that
programs can be compiled with a native compiler, where the host and
target are the same, as opposed to a cross-compiler, where they are
not the same. This is especially important in cases where the target
hardware does not have the resources to run a native compiler.
Problems with cross-compilation are often related to host and target
differences in integer sizes, pointer sizes, endianness, machine code,
ABI, etc. Sometimes cross-compilation is not even supported by the
build script for a given package. One effective way to avoid those
problems is to replace the cross-compiler with a native compiler. This
change of compilation methods does not resolve the inherent problems
with cross-compilation.
The native compiler naturally replaces the cross-compiler, because one
typically uses one or the other, and preferably the native compiler
when the circumstances admit this. The native compiler is also a good
test case for the R5900 QEMU user mode. Additionally, Gentoo is well-
known for compiling and installing its packages from sources.
This change has been tested with Gentoo compiled for R5900, including
native compilation of several packages under QEMU.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:42:19 +0000 (17:42 +0200)]
tests/tcg/mips: Add tests for R5900 DIVU1
Add a test for DIVU1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:42:08 +0000 (17:42 +0200)]
tests/tcg/mips: Add tests for R5900 DIV1
Add a test for DIV1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:41:58 +0000 (17:41 +0200)]
tests/tcg/mips: Add tests for R5900 MTLO1 and MTHI1
Add a test for MTLO1 and MTHI1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:41:47 +0000 (17:41 +0200)]
tests/tcg/mips: Add tests for R5900 MFLO1 and MFHI1
Add a test for MFLO1 and MFHI1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:41:32 +0000 (17:41 +0200)]
tests/tcg/mips: Add tests for R5900 three-operand MULTU1
Add a test for MULTU1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:41:21 +0000 (17:41 +0200)]
tests/tcg/mips: Add tests for R5900 three-operand MULT1
Add a test for MULT1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:41:13 +0000 (17:41 +0200)]
tests/tcg/mips: Add tests for R5900 three-operand MULTU
Add a test for MULTU.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:41:01 +0000 (17:41 +0200)]
tests/tcg/mips: Add tests for R5900 three-operand MULT
Add a test for MULT.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:40:18 +0000 (17:40 +0200)]
target/mips: Make R5900 DMULT[U], DDIV[U], LL[D] and SC[D] user only
The Linux kernel traps certain reserved instruction exceptions to
emulate the corresponding instructions. QEMU plays the role of the
kernel in user mode, so those traps are emulated by accepting the
instructions.
This change adds the function check_insn_opc_user_only to signal a
reserved instruction exception for flagged CPUs in QEMU system mode.
The MIPS III instructions DMULT[U], DDIV[U], LL[D] and SC[D] are not
implemented in R5900 hardware. They are trapped and emulated by the
Linux kernel and, accordingly, therefore QEMU user only instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:39:17 +0000 (17:39 +0200)]
target/mips: Support R5900 MOVN, MOVZ and PREF instructions from MIPS IV
The R5900 is taken to be MIPS III with certain modifications. From
MIPS IV it implements the instructions MOVN, MOVZ and PREF.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:39:03 +0000 (17:39 +0200)]
target/mips: Support R5900 DIV1 and DIVU1 instructions
Add support for DIV1 and DIVU1 instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:38:49 +0000 (17:38 +0200)]
target/mips: Support R5900 MFLO1, MTLO1, MFHI1 and MTHI1 instructions
Add support for MFLO1, MTLO1, MFHI1 and MTHI1 instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:38:36 +0000 (17:38 +0200)]
target/mips: Support R5900 three-operand MULT1 and MULTU1 instructions
Add support for MULT1 and MULTU1 instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:38:21 +0000 (17:38 +0200)]
target/mips: Support R5900 three-operand MULT and MULTU instructions
The three-operand MULT and MULTU are the only R5900-specific
instructions emitted by GCC 7.3. The R5900 also implements the three-
operand MADD and MADDU instructions, but they are omitted in QEMU for
now since they are absent in programs compiled by current GCC versions.
Likewise, the R5900-specific pipeline 1 instruction variants MULT1,
MULTU1, DIV1, DIVU1, MADD1, MADDU1, MFHI1, MFLO1, MTHI1 and MTLO1
are omitted here as well.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:37:18 +0000 (17:37 +0200)]
target/mips: Add a placeholder for R5900 MMI3 instruction subclass
Add a placeholder for MMI3 subclass.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:37:06 +0000 (17:37 +0200)]
target/mips: Add a placeholder for R5900 MMI2 instruction subclass
Add a placeholder for MMI2 subclass.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:36:54 +0000 (17:36 +0200)]
target/mips: Add a placeholder for R5900 MMI1 instruction subclass
Add a placeholder for MM1 subclass.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:36:41 +0000 (17:36 +0200)]
target/mips: Add a placeholder for R5900 MMI0 instruction subclass
Add a placeholder for MMI0 subclass.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:36:23 +0000 (17:36 +0200)]
target/mips: Add a placeholder for R5900 MMI instruction class
Add a placeholder for MMI class. This is the main palceholder for
MMI ASE.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:35:56 +0000 (17:35 +0200)]
target/mips: Add a placeholder for R5900 LQ
Add a placeholder for LQ instruction.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:35:41 +0000 (17:35 +0200)]
target/mips: Add a placeholder for R5900 SQ, handle user mode RDHWR
Add placeholder for SQ instruction, handle RDHWR.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:34:46 +0000 (17:34 +0200)]
target/mips: Define R5900 MMI3 opcode constants
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:34:21 +0000 (17:34 +0200)]
target/mips: Define R5900 MMI2 opcode constants
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:34:11 +0000 (17:34 +0200)]
target/mips: Define R5900 MMI1 opcode constants
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:34:04 +0000 (17:34 +0200)]
target/mips: Define R5900 MMI0 opcode constants
Add definition of MI0 opcodes.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:33:32 +0000 (17:33 +0200)]
target/mips: Define R5900 MMI<0|1|2|3> subclasses and opcode constants
Define MMI0, MMI1, MMI2, MMI3 subclass opcodes, and other opcodes of
instructions in MMI class.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:33:20 +0000 (17:33 +0200)]
target/mips: Define R5900 MMI class, and LQ and SQ opcode constants
Define MMI class, LQ, and SQ R5900 opdoces.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:32:36 +0000 (17:32 +0200)]
target/mips: Add R5900 Multimedia Instruction overview note
Add a comment on R5900 MMI ASE (short overview).
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fredrik Noring [Sun, 21 Oct 2018 15:31:26 +0000 (17:31 +0200)]
target/mips: Define R5900 ISA, MMI ASE, and R5900 CPU preprocessor constants
The R5900 implements the 64-bit MIPS III instruction set except
DMULT, DMULTU, DDIV, DDIVU, LL, SC, LLD and SCD. The MIPS IV
instructions MOVN, MOVZ and PREF are implemented. It has the
R5900-specific three-operand instructions MADD, MADDU, MULT and
MULTU as well as pipeline 1 versions MULT1, MULTU1, DIV1, DIVU1,
MADD1, MADDU1, MFHI1, MFLO1, MTHI1 and MTLO1. A set of 93 128-bit
multimedia instructions specific to the R5900 is also implemented.
The Toshiba TX System RISC TX79 Core Architecture manual:
https://wiki.qemu.org/File:C790.pdf
describes the C790 processor that is a follow-up to the R5900. There
are a few notable differences in that the R5900 FPU
- is not IEEE 754-1985 compliant,
- does not implement double format, and
- its machine code is nonstandard.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Peter Maydell [Wed, 24 Oct 2018 09:49:14 +0000 (10:49 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-
20181024' into staging
target-arm queue:
* ssi-sd: Make devices picking up backends unavailable with -device
* Add support for VCPU event states
* Move towards making ID registers the source of truth for
whether a guest CPU implements a feature, rather than having
parallel ID registers and feature bit flags
* Implement various HCR hypervisor trap/config bits
* Get IL bit correct for v7 syndrome values
* Report correct syndrome for FP/SIMD traps to Hyp mode
* hw/arm/boot: Increase compliance with kernel arm64 boot protocol
* Refactor A32 Neon to use generic vector infrastructure
* Fix a bug in A32 VLD2 "(multiple 2-element structures)" insn
* net: cadence_gem: Report features correctly in ID register
* Avoid some unnecessary TLB flushes on TTBR register writes
# gpg: Signature made Wed 24 Oct 2018 10:46:01 BST
# gpg: using RSA key
3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-
20181024: (44 commits)
target/arm: Only flush tlb if ASID changes
target/arm: Remove writefn from TTBR0_EL3
net: cadence_gem: Announce 64bit addressing support
net: cadence_gem: Announce availability of priority queues
target/arm: Reorg NEON VLD/VST single element to one lane
target/arm: Promote consecutive memory ops for aa32
target/arm: Reorg NEON VLD/VST all elements
target/arm: Use gvec for NEON VLD all lanes
target/arm: Use gvec for NEON_3R_VTST_VCEQ, NEON_3R_VCGT, NEON_3R_VCGE
target/arm: Use gvec for NEON_3R_VML
target/arm: Use gvec for VSRI, VSLI
target/arm: Use gvec for VSRA
target/arm: Use gvec for VSHR, VSHL
target/arm: Use gvec for NEON_3R_VMUL
target/arm: Use gvec for NEON_2RM_VMN, NEON_2RM_VNEG
target/arm: Use gvec for NEON_3R_VADD_VSUB insns
target/arm: Use gvec for NEON_3R_LOGIC insns
target/arm: Use gvec for NEON VMOV, VMVN, VBIC & VORR (immediate)
target/arm: Use gvec for NEON VDUP
target/arm: Mark some arrays const
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cédric Le Goater [Mon, 1 Oct 2018 06:38:03 +0000 (08:38 +0200)]
net: xgmac: convert SysBus init method to a realize method
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20181001063803.22330-12-clg@kaod.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cédric Le Goater [Mon, 1 Oct 2018 06:38:02 +0000 (08:38 +0200)]
net: stellaris_enet: add a reset method
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20181001063803.22330-11-clg@kaod.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cédric Le Goater [Mon, 1 Oct 2018 06:38:01 +0000 (08:38 +0200)]
net: stellaris_enet: convert SysBus init method to a realize method
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20181001063803.22330-10-clg@kaod.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cédric Le Goater [Mon, 1 Oct 2018 06:38:00 +0000 (08:38 +0200)]
net: smc91c111: convert SysBus init method to a realize method
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <
20181001063803.22330-9-clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cédric Le Goater [Mon, 1 Oct 2018 06:37:59 +0000 (08:37 +0200)]
net: opencores_eth: convert SysBus init method to a realize method
Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20181001063803.22330-8-clg@kaod.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cédric Le Goater [Mon, 1 Oct 2018 06:37:58 +0000 (08:37 +0200)]
net: mipsnet: convert SysBus init method to a realize method
Cc: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20181001063803.22330-7-clg@kaod.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cédric Le Goater [Mon, 1 Oct 2018 06:37:57 +0000 (08:37 +0200)]
net: milkymist_minimac2: convert SysBus init method to a realize method
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20181001063803.22330-6-clg@kaod.org>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cédric Le Goater [Mon, 1 Oct 2018 06:37:56 +0000 (08:37 +0200)]
net: lance: convert SysBus init method to a realize method
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20181001063803.22330-5-clg@kaod.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cédric Le Goater [Mon, 1 Oct 2018 06:37:55 +0000 (08:37 +0200)]
net: lan9118: convert SysBus init method to a realize method
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <
20181001063803.22330-4-clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cédric Le Goater [Mon, 1 Oct 2018 06:37:54 +0000 (08:37 +0200)]
net: etraxfs_eth: add a reset method
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <
20181001063803.22330-3-clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cédric Le Goater [Mon, 1 Oct 2018 06:37:53 +0000 (08:37 +0200)]
net: etraxfs_eth: convert SysBus init method to a realize method
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <
20181001063803.22330-2-clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Fri, 5 Oct 2018 09:20:24 +0000 (11:20 +0200)]
memory-device: trace when pre_plugging/plugging/unplugging
Let's trace the address and the id of a memory device when
pre_plugging/plugging/unplugging succeeded.
Trace it when pre_plugging as well as when plugging, so we really know
when a specific address is actually used.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20181005092024.14344-17-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Fri, 5 Oct 2018 09:20:23 +0000 (11:20 +0200)]
memory-device: complete factoring out unplug handling
With the new memory device functions in place, we can factor out
unplugging of memory devices completely.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20181005092024.14344-16-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Fri, 5 Oct 2018 09:20:22 +0000 (11:20 +0200)]
memory-device: complete factoring out plug handling
With the new memory device functions in place, we can factor out
plugging of memory devices completely.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20181005092024.14344-15-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Fri, 5 Oct 2018 09:20:21 +0000 (11:20 +0200)]
memory-device: complete factoring out pre_plug handling
With all required memory device class functions in place, we can factor
out pre_plug handling of memory devices. Take proper care of errors. We
still have to carry along legacy_align required for pc compatibility
handling.
We will factor out tracing of the address separately in a follow-up
patch.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20181005092024.14344-14-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Fri, 5 Oct 2018 09:20:20 +0000 (11:20 +0200)]
memory-device: add device class function set_addr()
To be able to factor out address assignment of memory devices, we will
have to read (get_addr()) and write (set_addr()) the address.
We can't use properties for this purpose, as properties are device
specific. E.g. while the address property for a DIMM is called "addr", it
might be called differently (e.g. "memaddr") for other devices.
Especially virtio based memory devices cannot use "addr" as that is already
reserved and used for the address on the bus (for the proxy device).
Also, it might be possible to have memory devices without address
properties (e.g. internal DIMM-like thingies).
In contrast to get_addr(), we expect that set_addr() can fail.
Keep it simple for now for pc-dimm and simply set the static property, that
will fail once realized.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20181005092024.14344-13-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Fri, 5 Oct 2018 09:20:19 +0000 (11:20 +0200)]
memory-device: drop get_region_size()
There are no remaining users of get_region_size() except
memory_device_get_region_size() itself. We can make
memory_device_get_region_size() work directly on get_memory_region()
instead and drop get_region_size().
In addition, we can now use memory_device_get_region_size() in pc-dimm
code to implement get_plugged_size()"
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20181005092024.14344-12-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Fri, 5 Oct 2018 09:20:18 +0000 (11:20 +0200)]
memory-device: factor out get_memory_region() from pc-dimm
The memory region is necessary for plugging/unplugging a memory device.
The region size (via get_region_size()) is no longer sufficient, as
besides the alignment, also the region itself is required in order to
add it to the device memory region of the machine via
- memory_region_add_subregion
- memory_region_del_subregion
So, to factor out plugging/unplugging of memory devices from pc-dimm
code, we have to factor out access to the memory region first.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20181005092024.14344-11-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Fri, 5 Oct 2018 09:20:17 +0000 (11:20 +0200)]
memory-device: add and use memory_device_get_region_size()
We will factor out get_memory_region() from pc-dimm to memory device code
soon. Once that is done, get_region_size() can be implemented
generically and essentially be replaced by
memory_device_get_region_size (and work only on get_memory_region()).
We have some users of get_memory_region() (spapr and pc-dimm code) that are
only interested in the size. So let's rework them to use
memory_device_get_region_size() first, then we can factor out
get_memory_region() and eventually remove get_region_size() without
touching the same code multiple times.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20181005092024.14344-10-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Fri, 5 Oct 2018 09:20:16 +0000 (11:20 +0200)]
memory-device: document MemoryDeviceClass
Document the functions. Don't document get_region_size(), as we will be
dropping/replacing that one soon.
Use same documentation style as in include/exec/memory.h, but don't
document the parameters, as they are self-explanatory.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20181005092024.14344-9-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Fri, 5 Oct 2018 09:20:15 +0000 (11:20 +0200)]
memory-device: forward errors in get_region_size()/get_plugged_size()
Let's properly forward the errors, so errors from get_region_size() /
get_plugged_size() can be handled.
Users right now call both functions after the device has been realized,
which is will never fail, so it is fine to continue using error_abort.
While at it, remove a leftover error check (suggested by Igor).
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20181005092024.14344-8-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Fri, 5 Oct 2018 09:20:14 +0000 (11:20 +0200)]
memory-device: introduce separate config option
Some architectures might support memory devices, while they don't
support DIMM/NVDIMM. So let's
- Rename CONFIG_MEM_HOTPLUG to CONFIG_MEM_DEVICE
- Introduce CONFIG_DIMM and use it similarly to CONFIG NVDIMM
CONFIG_DIMM and CONFIG_NVDIMM require CONFIG_MEM_DEVICE.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20181005092024.14344-7-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Fri, 5 Oct 2018 09:20:13 +0000 (11:20 +0200)]
memory-device: use memory device terminology in error messages
While we rephrased most error messages, we missed these.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20181005092024.14344-6-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Fri, 5 Oct 2018 09:20:12 +0000 (11:20 +0200)]
pc-dimm: pass PCDIMMDevice to pc_dimm_.*plug
We're plugging/unplugging a PCDIMMDevice, so directly pass this type
instead of a more generic DeviceState.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20181005092024.14344-5-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Fri, 5 Oct 2018 09:20:11 +0000 (11:20 +0200)]
memory-device: improve "range conflicts" error message
Handle id==NULL better and indicate that we are dealing with memory
devices.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20181005092024.14344-4-david@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Fri, 5 Oct 2018 09:20:10 +0000 (11:20 +0200)]
memory-device: fix error message when hinted address is too small
The "at" should actually be a "before".
if (new_addr < address_space_start)
-> "can't add memory ... before... $address_space_start"
So it looks similar to the other check
} else if ((new_addr + size) > address_space_end)
-> "can't add memory ... beyond..."
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20181005092024.14344-3-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Fri, 5 Oct 2018 09:20:09 +0000 (11:20 +0200)]
memory-device: fix alignment error message
We're missing "x" after the leading 0.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20181005092024.14344-2-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Li Qiang [Wed, 10 Oct 2018 16:10:25 +0000 (09:10 -0700)]
machine: fix a typo
Cc: qemu-trivial@nongnu.org
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <
20181010161025.34796-1-liq3ea@163.com>
Reviewed-by: Stefano Garzarella <stefanogarzarella@gmail.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Philippe Mathieu-Daudé [Tue, 2 Oct 2018 21:25:21 +0000 (23:25 +0200)]
hw/mips/malta: Remove unuseful code
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
20181002212522.23303-13-f4bug@amsat.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Philippe Mathieu-Daudé [Tue, 2 Oct 2018 21:25:20 +0000 (23:25 +0200)]
hw/hppa/dino: Remove unuseful code
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
20181002212522.23303-12-f4bug@amsat.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Philippe Mathieu-Daudé [Tue, 2 Oct 2018 21:25:19 +0000 (23:25 +0200)]
hw/alpha/typhoon: Remove unuseful code
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
20181002212522.23303-11-f4bug@amsat.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>