OSDN Git Service
David S. Miller [Fri, 9 Sep 2022 07:20:58 +0000 (08:20 +0100)]
Merge branch 'lan743x-next'
Raju Lakkaraju says:
====================
net: lan743x: Fix to use multiqueue start/stop APIs
This patch series address the fix to use multiqueue start/stop APIs and Add Rx IP and TCP checksum offload
Changes:
========
V1 -> V2:
- Fix the sparse warnings
V0 -> V1:
- Remove chip SKU check conditionals
- Update the changes description
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Raju Lakkaraju [Thu, 8 Sep 2022 08:28:34 +0000 (13:58 +0530)]
net: lan743x: Add support for Rx IP & TCP checksum offload
Add Rx IP and TCP checksum offload
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Raju Lakkaraju [Thu, 8 Sep 2022 08:28:33 +0000 (13:58 +0530)]
net: lan743x: Fix to use multiqueue start/stop APIs
- Fix to use multiqueue start/stop APIs
- Change to return NETDEV_TX_BUSY instead of holding the TX skb when busy
- Increase Tx ring size to 128 to address performance issues in some platforms
- Use NAPI_POLL_WEIGHT for Tx Napi handler instead of ring dependent value
- Use multiqueue to register 4 Rx channels
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 9 Sep 2022 07:08:51 +0000 (08:08 +0100)]
Merge git://git./linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
The following set contains changes for your *net-next* tree:
- make conntrack ignore packets that are delayed (containing
data already acked). The current behaviour to flag them as INVALID
causes more harm than good, let them pass so peer can send an
immediate ACK for the most recent sequence number.
- make conntrack recognize when both peers have sent 'invalid' FINs:
This helps cleaning out stale connections faster for those cases where
conntrack is no longer in sync with the actual connection state.
- Now that DECNET is gone, we don't need to reserve space for DECNET
related information.
- compact common 'find a free port number for the new inbound
connection' code and move it to a helper, then cap number of tries
the new helper will make until it gives up.
- replace various instances of strlcpy with strscpy, from Wolfram Sang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Thu, 8 Sep 2022 16:34:54 +0000 (18:34 +0200)]
Merge git://git./linux/kernel/git/netdev/net
drivers/net/ethernet/freescale/fec.h
7d650df99d52 ("net: fec: add pm_qos support on imx6q platform")
40c79ce13b03 ("net: fec: add stop mode support for imx8 platform")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Casper Andersson [Tue, 6 Sep 2022 06:58:15 +0000 (08:58 +0200)]
net: sparx5: fix function return type to match actual type
Function returns error integer, not bool.
Does not have any impact on functionality.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220906065815.3856323-1-casper.casan@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Linus Torvalds [Thu, 8 Sep 2022 12:15:01 +0000 (08:15 -0400)]
Merge tag 'net-6.0-rc5' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc, netfilter, wireless and bluetooth
subtrees.
Current release - regressions:
- skb: export skb drop reaons to user by TRACE_DEFINE_ENUM
- bluetooth: fix regression preventing ACL packet transmission
Current release - new code bugs:
- dsa: microchip: fix kernel oops on ksz8 switches
- dsa: qca8k: fix NULL pointer dereference for
of_device_get_match_data
Previous releases - regressions:
- netfilter: clean up hook list when offload flags check fails
- wifi: mt76: fix crash in chip reset fail
- rxrpc: fix ICMP/ICMP6 error handling
- ice: fix DMA mappings leak
- i40e: fix kernel crash during module removal
Previous releases - always broken:
- ipv6: sr: fix out-of-bounds read when setting HMAC data.
- tcp: TX zerocopy should not sense pfmemalloc status
- sch_sfb: don't assume the skb is still around after
enqueueing to child
- netfilter: drop dst references before setting
- wifi: wilc1000: fix DMA on stack objects
- rxrpc: fix an insufficiently large sglist in
rxkad_verify_packet_2()
- fec: use a spinlock to guard `fep->ptp_clk_on`
Misc:
- usb: qmi_wwan: add Quectel RM520N"
* tag 'net-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
sch_sfb: Also store skb len before calling child enqueue
net: phy: lan87xx: change interrupt src of link_up to comm_ready
net/smc: Fix possible access to freed memory in link clear
net: ethernet: mtk_eth_soc: check max allowed hash in mtk_ppe_check_skb
net: skb: export skb drop reaons to user by TRACE_DEFINE_ENUM
net: ethernet: mtk_eth_soc: fix typo in __mtk_foe_entry_clear
net: dsa: felix: access QSYS_TAG_CONFIG under tas_lock in vsc9959_sched_speed_set
net: dsa: felix: disable cut-through forwarding for frames oversized for tc-taprio
net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet
net: usb: qmi_wwan: add Quectel RM520N
net: dsa: qca8k: fix NULL pointer dereference for of_device_get_match_data
tcp: fix early ETIMEDOUT after spurious non-SACK RTO
stmmac: intel: Simplify intel_eth_pci_remove()
net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()
ipv6: sr: fix out-of-bounds read when setting HMAC data.
bonding: accept unsolicited NA message
bonding: add all node mcast address when slave up
bonding: use unspecified address if no available link local address
wifi: use struct_group to copy addresses
wifi: mac80211_hwsim: check length for virtio packets
...
Linus Torvalds [Wed, 31 Aug 2022 16:46:12 +0000 (09:46 -0700)]
fs: only do a memory barrier for the first set_buffer_uptodate()
Commit
d4252071b97d ("add barriers to buffer_uptodate and
set_buffer_uptodate") added proper memory barriers to the buffer head
BH_Uptodate bit, so that anybody who tests a buffer for being up-to-date
will be guaranteed to actually see initialized state.
However, that commit didn't _just_ add the memory barrier, it also ended
up dropping the "was it already set" logic that the BUFFER_FNS() macro
had.
That's conceptually the right thing for a generic "this is a memory
barrier" operation, but in the case of the buffer contents, we really
only care about the memory barrier for the _first_ time we set the bit,
in that the only memory ordering protection we need is to avoid anybody
seeing uninitialized memory contents.
Any other access ordering wouldn't be about the BH_Uptodate bit anyway,
and would require some other proper lock (typically BH_Lock or the folio
lock). A reader that races with somebody invalidating the buffer head
isn't an issue wrt the memory ordering, it's a serialization issue.
Now, you'd think that the buffer head operations don't matter in this
day and age (and I certainly thought so), but apparently some loads
still end up being heavy users of buffer heads. In particular, the
kernel test robot reported that not having this bit access optimization
in place caused a noticeable direct IO performance regression on ext4:
fxmark.ssd_ext4_no_jnl_DWTL_54_directio.works/sec -26.5% regression
although you presumably need a fast disk and a lot of cores to actually
notice.
Link: https://lore.kernel.org/all/Yw8L7HTZ%2FdE2%2Fo9C@xsang-OptiPlex-9020/
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Fengwei Yin <fengwei.yin@intel.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 8 Sep 2022 11:37:38 +0000 (07:37 -0400)]
Merge tag 'efi-urgent-for-v6.0-1' of git://git./linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"A couple of low-priority EFI fixes:
- prevent the randstruct plugin from re-ordering EFI protocol
definitions
- fix a use-after-free in the capsule loader
- drop unused variable"
* tag 'efi-urgent-for-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: capsule-loader: Fix use-after-free in efi_capsule_write
efi/x86: libstub: remove unused variable
efi: libstub: Disable struct randomization
Heiner Kallweit [Mon, 5 Sep 2022 19:23:12 +0000 (21:23 +0200)]
r8169: merge support for chip versions 10, 13, 16
These chip versions are closely related and all of them have no
chip-specific MAC/PHY initialization. Therefore merge support
for the three chip versions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/469d27e0-1d06-9b15-6c96-6098b3a52e35@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Toke Høiland-Jørgensen [Mon, 5 Sep 2022 19:21:36 +0000 (21:21 +0200)]
sch_sfb: Also store skb len before calling child enqueue
Cong Wang noticed that the previous fix for sch_sfb accessing the queued
skb after enqueueing it to a child qdisc was incomplete: the SFB enqueue
function was also calling qdisc_qstats_backlog_inc() after enqueue, which
reads the pkt len from the skb cb field. Fix this by also storing the skb
len, and using the stored value to increment the backlog after enqueueing.
Fixes:
9efd23297cca ("sch_sfb: Don't assume the skb is still around after enqueueing to child")
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20220905192137.965549-1-toke@toke.dk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Arun Ramadoss [Mon, 5 Sep 2022 15:27:50 +0000 (20:57 +0530)]
net: phy: lan87xx: change interrupt src of link_up to comm_ready
Currently phy link up/down interrupt is enabled using the
LAN87xx_INTERRUPT_MASK register. In the lan87xx_read_status function,
phy link is determined using the T1_MODE_STAT_REG register comm_ready bit.
comm_ready bit is set using the loc_rcvr_status & rem_rcvr_status.
Whenever the phy link is up, LAN87xx_INTERRUPT_SOURCE link_up bit is set
first but comm_ready bit takes some time to set based on local and
remote receiver status.
As per the current implementation, interrupt is triggered using link_up
but the comm_ready bit is still cleared in the read_status function. So,
link is always down. Initially tested with the shared interrupt
mechanism with switch and internal phy which is working, but after
implementing interrupt controller it is not working.
It can fixed either by updating the read_status function to read from
LAN87XX_INTERRUPT_SOURCE register or enable the interrupt mask for
comm_ready bit. But the validation team recommends the use of comm_ready
for link detection.
This patch fixes by enabling the comm_ready bit for link_up in the
LAN87XX_INTERRUPT_MASK_2 register (MISC Bank) and link_down in
LAN87xx_INTERRUPT_MASK register.
Fixes:
8a1b415d70b7 ("net: phy: added ethtool master-slave configuration support")
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220905152750.5079-1-arun.ramadoss@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kurt Kanzenbach [Mon, 5 Sep 2022 13:01:55 +0000 (15:01 +0200)]
net: stmmac: Disable automatic FCS/Pad stripping
The stmmac has the possibility to automatically strip the padding/FCS for IEEE
802.3 type frames. This feature is enabled conditionally. Therefore, the stmmac
receive path has to have a determination logic whether the FCS has to be
stripped in software or not.
In fact, for DSA this ACS feature is disabled and the determination logic
doesn't check for it properly. For instance, when using DSA in combination with
an older stmmac (pre version 4), the FCS is not stripped by hardware or software
which is problematic.
So either add another check for DSA to the fast path or simply disable ACS
feature completely. The latter approach has been chosen, because most of the
time the FCS is stripped in software anyway and it removes conditionals from the
receive fast path.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/87v8q8jjgh.fsf@kurt/
Link: https://lore.kernel.org/r/20220905130155.193640-1-kurt@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hyunwoo Kim [Wed, 7 Sep 2022 16:07:14 +0000 (09:07 -0700)]
efi: capsule-loader: Fix use-after-free in efi_capsule_write
A race condition may occur if the user calls close() on another thread
during a write() operation on the device node of the efi capsule.
This is a race condition that occurs between the efi_capsule_write() and
efi_capsule_flush() functions of efi_capsule_fops, which ultimately
results in UAF.
So, the page freeing process is modified to be done in
efi_capsule_release() instead of efi_capsule_flush().
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Link: https://lore.kernel.org/all/20220907102920.GA88602@ubuntu/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
David S. Miller [Wed, 7 Sep 2022 15:20:15 +0000 (16:20 +0100)]
Merge branch 'hns3-new-features'
Guangbin Huang says:
====================
hns3: add some new features
This series adds some new features for the HNS3 ethernet driver.
Patches #1~#3 support configuring dscp map to tc.
Patch 4# supports querying FEC statistics by command "ethtool -I --show-fec eth0".
Patch 5# supports querying and setting Serdes lane number.
Change logs:
V1 -> V2:
- fix build error of patch 1# reported by robot lkp@intel.com.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hao Chen [Tue, 6 Sep 2022 09:12:23 +0000 (17:12 +0800)]
net: hns3: add support to query and set lane number by ethtool
When serdes lane support setting 25Gb/s or 50Gb/s speed and user wants to
set port speed as 50Gb/s, it can be setted as one 50Gb/s serdes lane or
two 25Gb/s serdes lanes.
So, this patch adds support to query and set lane number by ethtool
to satisfy this scenario.
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hao Lan [Tue, 6 Sep 2022 09:12:22 +0000 (17:12 +0800)]
net: hns3: add querying fec statistics
FEC statistics can be used to check the transmission quality of links.
This patch implements the get_fec_stats callback of ethtool_ops to support
querying FEC statistics by command "ethtool -I --show-fec eth0".
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang [Tue, 6 Sep 2022 09:12:21 +0000 (17:12 +0800)]
net: hns3: debugfs add dump dscp map info
This patch add dump the map relation for dscp, priority and TC, and
the current tc map mode.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang [Tue, 6 Sep 2022 09:12:20 +0000 (17:12 +0800)]
net: hns3: support ndo_select_queue()
To support tx packets to select queue according to its dscp field after
setting dscp and tc map relationship, this patch implements
ndo_select_queue() to set skb->priority according to the user's setting
dscp and priority map relationship.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang [Tue, 6 Sep 2022 09:12:19 +0000 (17:12 +0800)]
net: hns3: add support config dscp map to tc
This patch add support config dscp map to tc by implementing ieee_setapp
and ieee_delapp of struct dcbnl_rtnl_ops. Driver will convert mapping
relationship from dscp-prio to dscp-tc.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yacan Liu [Tue, 6 Sep 2022 13:01:39 +0000 (21:01 +0800)]
net/smc: Fix possible access to freed memory in link clear
After modifying the QP to the Error state, all RX WR would be completed
with WC in IB_WC_WR_FLUSH_ERR status. Current implementation does not
wait for it is done, but destroy the QP and free the link group directly.
So there is a risk that accessing the freed memory in tasklet context.
Here is a crash example:
BUG: unable to handle page fault for address:
ffffffff8f220860
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD
f7300e067 P4D
f7300e067 PUD
f7300f063 PMD
8c4e45063 PTE
800ffff08c9df060
Oops: 0002 [#1] SMP PTI
CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G S OE 5.10.0-0607+ #23
Hardware name: Inspur NF5280M4/YZMB-00689-101, BIOS 4.1.20 07/09/2018
RIP: 0010:native_queued_spin_lock_slowpath+0x176/0x1b0
Code: f3 90 48 8b 32 48 85 f6 74 f6 eb d5 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 00 c8 02 00 48 03 04 f5 00 09 98 8e <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32
RSP: 0018:
ffffb3b6c001ebd8 EFLAGS:
00010086
RAX:
ffffffff8f220860 RBX:
0000000000000246 RCX:
0000000000080000
RDX:
ffff91db1f86c800 RSI:
000000000000173c RDI:
ffff91db62bace00
RBP:
ffff91db62bacc00 R08:
0000000000000000 R09:
c00000010000028b
R10:
0000000000055198 R11:
ffffb3b6c001ea58 R12:
ffff91db80e05010
R13:
000000000000000a R14:
0000000000000006 R15:
0000000000000040
FS:
0000000000000000(0000) GS:
ffff91db1f840000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffffff8f220860 CR3:
00000001f9580004 CR4:
00000000003706e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<IRQ>
_raw_spin_lock_irqsave+0x30/0x40
mlx5_ib_poll_cq+0x4c/0xc50 [mlx5_ib]
smc_wr_rx_tasklet_fn+0x56/0xa0 [smc]
tasklet_action_common.isra.21+0x66/0x100
__do_softirq+0xd5/0x29c
asm_call_irq_on_stack+0x12/0x20
</IRQ>
do_softirq_own_stack+0x37/0x40
irq_exit_rcu+0x9d/0xa0
sysvec_call_function_single+0x34/0x80
asm_sysvec_call_function_single+0x12/0x20
Fixes:
bd4ad57718cc ("smc: initialize IB transport incl. PD, MR, QP, CQ, event, WR")
Signed-off-by: Yacan Liu <liuyacan@corp.netease.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 7 Sep 2022 14:57:48 +0000 (15:57 +0100)]
Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-09-06 (i40e, iavf)
This series contains updates to i40e and iavf drivers.
Stanislaw adds support for new device id for i40e.
Jaroslaw tidies up some code around MSI-X configuration by adding/
reworking comments and introducing a couple of macros for i40e.
Michal resolves some races around reset and close by deferring and deleting
some pending AdminQ operations and reworking filter additions and deletions
during these operations for iavf.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 7 Sep 2022 14:56:21 +0000 (15:56 +0100)]
Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-09-06 (ice)
This series contains updates to ice driver only.
Tony reduces device MSI-X request/usage when entire request can't be fulfilled.
Michal adds check for reset when waiting for PTP offsets.
Paul refactors firmware version checks to use a common helper.
Christophe Jaillet changes a couple of local memory allocation to not
use the devm variant.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Tue, 6 Sep 2022 15:20:36 +0000 (17:20 +0200)]
netfilter: nat: avoid long-running port range loop
Looping a large port range takes too long. Instead select a random
offset within [ntohs(exp->saved_proto.tcp.port), 65535] and try 128
ports.
This is a rehash of an erlier patch to do the same, but generalized
to handle other helpers as well.
Link: https://patchwork.ozlabs.org/project/netfilter-devel/patch/20210920204439.13179-2-Cole.Dishington@alliedtelesis.co.nz/
Signed-off-by: Florian Westphal <fw@strlen.de>
Florian Westphal [Tue, 6 Sep 2022 15:20:35 +0000 (17:20 +0200)]
netfilter: nat: move repetitive nat port reserve loop to a helper
Almost all nat helpers reserve an expecation port the same way:
Try the port inidcated by the peer, then move to next port if that
port is already in use.
We can squash this into a helper.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Wolfram Sang [Thu, 18 Aug 2022 21:02:24 +0000 (23:02 +0200)]
netfilter: move from strlcpy with unused retval to strscpy
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Florian Westphal <fw@strlen.de>
Florian Westphal [Mon, 22 Aug 2022 14:41:21 +0000 (16:41 +0200)]
netfilter: remove NFPROTO_DECNET
Decnet has been removed. so no need to reserve space in arrays for it.
Signed-off-by: Florian Westphal <fw@strlen.de>
Florian Westphal [Fri, 26 Aug 2022 13:32:27 +0000 (15:32 +0200)]
netfilter: conntrack: reduce timeout when receiving out-of-window fin or rst
In case the endpoints and conntrack go out-of-sync, i.e. there is
disagreement wrt. validy of sequence/ack numbers between conntracks
internal state and those of the endpoints, connections can hang for a
long time (until ESTABLISHED timeout).
This adds a check to detect a fin/fin exchange even if those are
invalid. The timeout is then lowered to UNACKED (default 300s).
Signed-off-by: Florian Westphal <fw@strlen.de>
Florian Westphal [Fri, 26 Aug 2022 13:32:26 +0000 (15:32 +0200)]
netfilter: conntrack: remove unneeded indent level
After previous patch, the conditional branch is obsolete, reformat it.
gcc generates same code as before this change.
Signed-off-by: Florian Westphal <fw@strlen.de>
Liu Shixin [Mon, 5 Sep 2022 12:50:42 +0000 (20:50 +0800)]
net: sysctl: remove unused variable long_max
The variable long_max is replaced by bpf_jit_limit_max and no longer be
used. So remove it.
No functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Mon, 5 Sep 2022 12:46:01 +0000 (14:46 +0200)]
net: ethernet: mtk_eth_soc: remove mtk_foe_entry_timestamp
Get rid of mtk_foe_entry_timestamp routine since it is no longer used.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Mon, 5 Sep 2022 12:41:28 +0000 (14:41 +0200)]
net: ethernet: mtk_eth_soc: check max allowed hash in mtk_ppe_check_skb
Even if max hash configured in hw in mtk_ppe_hash_entry is
MTK_PPE_ENTRIES - 1, check theoretical OOB accesses in
mtk_ppe_check_skb routine
Fixes:
c4f033d9e03e9 ("net: ethernet: mtk_eth_soc: rework hardware flow table management")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Menglong Dong [Mon, 5 Sep 2022 03:50:15 +0000 (11:50 +0800)]
net: skb: export skb drop reaons to user by TRACE_DEFINE_ENUM
As Eric reported, the 'reason' field is not presented when trace the
kfree_skb event by perf:
$ perf record -e skb:kfree_skb -a sleep 10
$ perf script
ip_defrag 14605 [021] 221.614303: skb:kfree_skb:
skbaddr=0xffff9d2851242700 protocol=34525 location=0xffffffffa39346b1
reason:
The cause seems to be passing kernel address directly to TP_printk(),
which is not right. As the enum 'skb_drop_reason' is not exported to
user space through TRACE_DEFINE_ENUM(), perf can't get the drop reason
string from the 'reason' field, which is a number.
Therefore, we introduce the macro DEFINE_DROP_REASON(), which is used
to define the trace enum by TRACE_DEFINE_ENUM(). With the help of
DEFINE_DROP_REASON(), now we can remove the auto-generate that we
introduced in the commit
ec43908dd556
("net: skb: use auto-generation to convert skb drop reason to string"),
and define the string array 'drop_reasons'.
Hmmmm...now we come back to the situation that have to maintain drop
reasons in both enum skb_drop_reason and DEFINE_DROP_REASON. But they
are both in dropreason.h, which makes it easier.
After this commit, now the format of kfree_skb is like this:
$ cat /tracing/events/skb/kfree_skb/format
name: kfree_skb
ID: 1524
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:void * skbaddr; offset:8; size:8; signed:0;
field:void * location; offset:16; size:8; signed:0;
field:unsigned short protocol; offset:24; size:2; signed:0;
field:enum skb_drop_reason reason; offset:28; size:4; signed:0;
print fmt: "skbaddr=%p protocol=%u location=%p reason: %s", REC->skbaddr, REC->protocol, REC->location, __print_symbolic(REC->reason, { 1, "NOT_SPECIFIED" }, { 2, "NO_SOCKET" } ......
Fixes:
ec43908dd556 ("net: skb: use auto-generation to convert skb drop reason to string")
Link: https://lore.kernel.org/netdev/CANn89i+bx0ybvE55iMYf5GJM48WwV1HNpdm9Q6t-HaEstqpCSA@mail.gmail.com/
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Tue, 6 Sep 2022 14:36:32 +0000 (16:36 +0200)]
net: ethernet: mtk_eth_soc: fix typo in __mtk_foe_entry_clear
Set ib1 state to MTK_FOE_STATE_UNBIND in __mtk_foe_entry_clear routine.
Fixes:
33fc42de33278 ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Fri, 26 Aug 2022 13:32:25 +0000 (15:32 +0200)]
netfilter: conntrack: ignore overly delayed tcp packets
If 'nf_conntrack_tcp_loose' is off (the default), tcp packets that are
outside of the current window are marked as INVALID.
nf/iptables rulesets often drop such packets via 'ct state invalid' or
similar checks.
For overly delayed acks, this can be a nuisance if such 'invalid' packets
are also logged.
Since they are not invalid in a strict sense, just ignore them, i.e.
conntrack won't extend timeout or change state so that they do not match
invalid state rules anymore.
This also avoids unwantend connection stalls in case conntrack considers
retransmission (of data that did not reach the peer) as too old.
The else branch of the conditional becomes obsolete.
Next patch will reformant the now always-true if condition.
The existing workaround for data that exceeds the calculated receive
window is adjusted to use the 'ignore' state so that these packets do
not refresh the timeout or change state other than updating ->td_end.
Signed-off-by: Florian Westphal <fw@strlen.de>
Florian Westphal [Fri, 26 Aug 2022 13:32:24 +0000 (15:32 +0200)]
netfilter: conntrack: prepare tcp_in_window for ternary return value
tcp_in_window returns true if the packet is in window and false if it is
not.
If its outside of window, packet will be treated as INVALID.
There are corner cases where the packet should still be tracked, because
rulesets may drop or log such packets, even though they can occur during
normal operation, such as overly delayed acks.
In extreme cases, connection may hang forever because conntrack state
differs from real state.
There is no retransmission for ACKs.
In case of ACK loss after conntrack processing, its possible that a
connection can be stuck because the actual retransmits are considered
stale ("SEQ is under the lower bound (already ACKed data
retransmitted)".
The problem is made worse by carrier-grade-nat which can also result
in stale packets from old connections to get treated as 'recent' packets
in conntrack (it doesn't support tcp timestamps at this time).
Prepare tcp_in_window() to return an enum that tells the desired
action (in-window/accept, bogus/drop).
A third action (accept the packet as in-window, but do not change
state) is added in a followup patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
David S. Miller [Wed, 7 Sep 2022 13:02:09 +0000 (14:02 +0100)]
Merge branch 'macsec-offload-mlx5'
Saeed Mahameed says:
====================
Introduce MACsec skb_metadata_dst and mlx5 macsec offload
v1->v2:
- attach mlx5 implementation patches.
This patchset introduces MACsec skb_metadata_dst to lay the ground
for MACsec HW offload.
MACsec is an IEEE standard (IEEE 802.1AE) for MAC security.
It defines a way to establish a protocol independent connection
between two hosts with data confidentiality, authenticity and/or
integrity, using GCM-AES. MACsec operates on the Ethernet layer and
as such is a layer 2 protocol, which means it’s designed to secure
traffic within a layer 2 network, including DHCP or ARP requests.
Linux has a software implementation of the MACsec standard and
HW offloading support.
The offloading is re-using the logic, netlink API and data
structures of the existing MACsec software implementation.
For Tx:
In the current MACsec offload implementation, MACsec interfaces shares
the same MAC address by default.
Therefore, HW can't distinguish from which MACsec interface the traffic
originated from.
MACsec stack will use skb_metadata_dst to store the SCI value, which is
unique per MACsec interface, skb_metadat_dst will be used later by the
offloading device driver to associate the SKB with the corresponding
offloaded interface (SCI) to facilitate HW MACsec offload.
For Rx:
Like in the Tx changes, if there are more than one MACsec device with
the same MAC address as in the packet's destination MAC, the packet will
be forward only to one of the devices and not neccessarly to the desired one.
Offloading device driver sets the MACsec skb_metadata_dst sci
field with the appropriaate Rx SCI for each SKB so the MACsec rx handler
will know to which port to divert those skbs, instead of wrongly solely
relaying on dst MAC address comparison.
1) patch 1,2, Add support to skb_metadata_dst in MACsec code:
net/macsec: Add MACsec skb_metadata_dst Tx Data path support
net/macsec: Add MACsec skb_metadata_dst Rx Data path support
2) patch 3, Move some MACsec driver code for sharing with various
drivers that implements offload:
net/macsec: Move some code for sharing with various drivers that
implements offload
3) The rest of the patches introduce mlx5 implementation for macsec
offloads TX and RX via steering tables.
a) TX, intercept skbs with macsec offlad mark in skb_metadata_dst and mark
the descriptor for offload.
b) RX, intercept offloaded frames and prepare the proper
skb_metadata_dst to mark offloaded rx frames.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Lior Nahmanson [Tue, 6 Sep 2022 05:21:29 +0000 (22:21 -0700)]
net/mlx5e: Add support to configure more than one macsec offload device
Add the ability to add up to 16 MACsec offload interfaces
over the same physical interface
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lior Nahmanson [Tue, 6 Sep 2022 05:21:28 +0000 (22:21 -0700)]
net/mlx5e: Add MACsec stats support for Rx/Tx flows
Add the following statistics:
RX successfully decrypted MACsec packets:
macsec_rx_pkts : Number of packets decrypted successfully
macsec_rx_bytes : Number of bytes decrypted successfully
Rx dropped MACsec packets:
macsec_rx_pkts_drop : Number of MACsec packets dropped
macsec_rx_bytes_drop : Number of MACsec bytes dropped
TX successfully encrypted MACsec packets:
macsec_tx_pkts : Number of packets encrypted/authenticated successfully
macsec_tx_bytes : Number of bytes encrypted/authenticated successfully
Tx dropped MACsec packets:
macsec_tx_pkts_drop : Number of MACsec packets dropped
macsec_tx_bytes_drop : Number of MACsec bytes dropped
The above can be seen using:
ethtool -S <ifc> |grep macsec
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lior Nahmanson [Tue, 6 Sep 2022 05:21:27 +0000 (22:21 -0700)]
net/mlx5e: Add MACsec offload SecY support
Add offload support for MACsec SecY callbacks - add/update/delete.
add_secy is called when need to create a new MACsec interface.
upd_secy is called when source MAC address or tx SC was changed.
del_secy is called when need to destroy the MACsec interface.
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lior Nahmanson [Tue, 6 Sep 2022 05:21:26 +0000 (22:21 -0700)]
net/mlx5e: Implement MACsec Rx data path using MACsec skb_metadata_dst
MACsec driver need to distinguish to which offload device the MACsec
is target to, in order to handle them correctly.
This can be done by attaching a metadata_dst to a SKB with a SCI,
when there is a match on MACsec rule.
To achieve that, there is a map between fs_id to SCI, so for each RX SC,
there is a unique fs_id allocated when creating RX SC.
fs_id passed to device driver as metadata for packets that passed Rx
MACsec offload to aid the driver to retrieve the matching SCI.
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lior Nahmanson [Tue, 6 Sep 2022 05:21:25 +0000 (22:21 -0700)]
net/mlx5e: Add MACsec RX steering rules
Rx flow steering consists of two flow tables (FTs).
The first FT (crypto table) have one default miss rule so non MACsec
offloaded packets bypass the MACSec tables.
All others flow table entries (FTEs) are divided to two equal groups
size, both of them are for MACsec packets:
The first group is for MACsec packets which contains SCI field in the
SecTAG header.
The second group is for MACsec packets which doesn't contain SCI,
where need to match on the source MAC address (only if the SCI
is built from default MACsec port).
Destination MAC address, ethertype and some of SecTAG fields
are also matched for both groups.
In case of match, invoke decrypt action on the packet.
For each MACsec Rx offloaded SA two rules are created: one with SCI
and one without SCI.
The second FT (check table) has two fixed rules:
One rule is for verifying that the previous offload actions were
finished successfully.
In this case, need to decap the SecTAG header and forward the packet
for further processing.
Another default rule for dropping packets that failed in the previous
decrypt actions.
The MACsec FTs are created on demand when the first MACsec rule is
added and destroyed when the last MACsec rule is deleted.
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lior Nahmanson [Tue, 6 Sep 2022 05:21:24 +0000 (22:21 -0700)]
net/mlx5: Add MACsec Rx tables support to fs_core
Add new namespace for MACsec RX flows.
Encrypted MACsec packets should be first decrypted and stripped
from MACsec header and then continues with the kernel's steering
pipeline.
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lior Nahmanson [Tue, 6 Sep 2022 05:21:23 +0000 (22:21 -0700)]
net/mlx5e: Add MACsec offload Rx command support
Add a support for Connect-X MACsec offload Rx SA & SC commands:
add, update and delete.
SCs are created on demend and aren't limited by number and unique by SCI.
Each Rx SA must be associated with Rx SC according to SCI.
Follow-up patches will implement the Rx steering.
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lior Nahmanson [Tue, 6 Sep 2022 05:21:22 +0000 (22:21 -0700)]
net/mlx5e: Implement MACsec Tx data path using MACsec skb_metadata_dst
MACsec driver marks Tx packets for device offload using a dedicated
skb_metadata_dst which holds a 64 bits SCI number.
A previously set rule will match on this number so the correct SA is used
for the MACsec operation.
As device driver can only provide 32 bits of metadata to flow tables,
need to used a mapping from 64 bit to 32 bits marker or id,
which is can be achieved by provide a 32 bit unique flow id in the
control path, and used a hash table to map 64 bit to the unique id in the
datapath.
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lior Nahmanson [Tue, 6 Sep 2022 05:21:21 +0000 (22:21 -0700)]
net/mlx5e: Add MACsec TX steering rules
Tx flow steering consists of two flow tables (FTs).
The first FT (crypto table) has two fixed rules:
One default miss rule so non MACsec offloaded packets bypass the MACSec
tables, another rule to make sure that MACsec key exchange (MKE) traffic
passes unencrypted as expected (matched of ethertype).
On each new MACsec offload flow, a new MACsec rule is added.
This rule is matched on metadata_reg_a (which contains the id of the
flow) and invokes the MACsec offload action on match.
The second FT (check table) has two fixed rules:
One rule for verifying that the previous offload actions were
finished successfully and packet need to be transmitted.
Another default rule for dropping packets that were failed in the
offload actions.
The MACsec FTs should be created on demand when the first MACsec rule is
added and destroyed when the last MACsec rule is deleted.
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lior Nahmanson [Tue, 6 Sep 2022 05:21:20 +0000 (22:21 -0700)]
net/mlx5: Add MACsec Tx tables support to fs_core
Changed EGRESS_KERNEL namespace to EGRESS_IPSEC and add new
namespace for MACsec TX.
This namespace should be the last namespace for transmitted packets.
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lior Nahmanson [Tue, 6 Sep 2022 05:21:19 +0000 (22:21 -0700)]
net/mlx5: Add MACsec offload Tx command support
This patch adds support for Connect-X MACsec offload Tx SA commands:
add, update and delete.
In Connect-X MACsec, a Security Association (SA) is added or deleted
via allocating a HW context of an encryption/decryption key and
a HW context of a matching SA (MACsec object).
When new SA is added:
- Use a separate crypto key HW context.
- Create a separate MACsec context in HW to include the SA properties.
Introduce a new compilation flag MLX5_EN_MACSEC for it.
Follow-up patches will implement the Tx steering.
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lior Nahmanson [Tue, 6 Sep 2022 05:21:18 +0000 (22:21 -0700)]
net/mlx5: Introduce MACsec Connect-X offload hardware bits and structures
Add MACsec offload related IFC structs, layouts and enumerations.
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lior Nahmanson [Tue, 6 Sep 2022 05:21:17 +0000 (22:21 -0700)]
net/mlx5: Generalize Flow Context for new crypto fields
In order to support MACsec offload (and maybe some other crypto features
in the future), generalize flow action parameters / defines to be used by
crypto offlaods other than IPsec.
The following changes made:
ipsec_obj_id field at flow action context was changed to crypto_obj_id,
intreduced a new crypto_type field where IPsec is the default zero type
for backward compatibility.
Action ipsec_decrypt was changed to crypto_decrypt.
Action ipsec_encrypt was changed to crypto_encrypt.
IPsec offload code was updated accordingly for backward compatibility.
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lior Nahmanson [Tue, 6 Sep 2022 05:21:16 +0000 (22:21 -0700)]
net/mlx5: Removed esp_id from struct mlx5_flow_act
esp_id is no longer in used
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lior Nahmanson [Tue, 6 Sep 2022 05:21:15 +0000 (22:21 -0700)]
net/macsec: Move some code for sharing with various drivers that implements offload
Move some MACsec infrastructure like defines and functions,
in order to avoid code duplication for future drivers which
implements MACsec offload.
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ben Ben-Ishay <benishay@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lior Nahmanson [Tue, 6 Sep 2022 05:21:14 +0000 (22:21 -0700)]
net/macsec: Add MACsec skb_metadata_dst Rx Data path support
Like in the Tx changes, if there are more than one MACsec device with
the same MAC address as in the packet's destination MAC, the packet will
be forward only to this device and not neccessarly to the desired one.
Offloading device drivers will mark offloaded MACsec SKBs with the
corresponding SCI in the skb_metadata_dst so the macsec rx handler will
know to which port to divert those skbs, instead of wrongly solely
relaying on dst MAC address comparison.
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lior Nahmanson [Tue, 6 Sep 2022 05:21:13 +0000 (22:21 -0700)]
net/macsec: Add MACsec skb_metadata_dst Tx Data path support
In the current MACsec offload implementation, MACsec interfaces shares
the same MAC address by default.
Therefore, HW can't distinguish from which MACsec interface the traffic
originated from.
MACsec stack will use skb_metadata_dst to store the SCI value, which is
unique per Macsec interface, skb_metadat_dst will be used by the
offloading device driver to associate the SKB with the corresponding
offloaded interface (SCI).
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 7 Sep 2022 12:44:04 +0000 (13:44 +0100)]
Merge branch 'dsa-felix-fixes'
Vladimir Oltean says:
====================
Fixes for Felix DSA driver calculation of tc-taprio guard bands
This series fixes some bugs which are not quite new, but date from v5.13
when static guard bands were enabled by Michael Walle to prevent
tc-taprio overruns.
The investigation started when Xiaoliang asked privately what is the
expected max SDU for a traffic class when its minimum gate interval is
10 us. The answer, as it turns out, is not an L1 size of 1250 octets,
but 1245 octets, since otherwise, the switch will not consider frames
for egress scheduling, because the static guard band is exactly as large
as the time interval. The switch needs a minimum of 33 ns outside of the
guard band to consider a frame for scheduling, and the reduction of the
max SDU by 5 provides exactly for that.
The fix for that (patch 1/3) is relatively small, but during testing, it
became apparent that cut-through forwarding prevents oversized frame
dropping from working properly. This is solved through the larger patch
2/3. Finally, patch 3/3 fixes one more tc-taprio locking problem found
through code inspection.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Mon, 5 Sep 2022 17:01:25 +0000 (20:01 +0300)]
net: dsa: felix: access QSYS_TAG_CONFIG under tas_lock in vsc9959_sched_speed_set
The read-modify-write of QSYS_TAG_CONFIG from vsc9959_sched_speed_set()
runs unlocked with respect to the other functions that access it, which
are vsc9959_tas_guard_bands_update(), vsc9959_qos_port_tas_set() and
vsc9959_tas_clock_adjust(). All the others are under ocelot->tas_lock,
so move the vsc9959_sched_speed_set() access under that lock as well, to
resolve the concurrency.
Fixes:
55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Mon, 5 Sep 2022 17:01:24 +0000 (20:01 +0300)]
net: dsa: felix: disable cut-through forwarding for frames oversized for tc-taprio
Experimentally, it looks like when QSYS_QMAXSDU_CFG_7 is set to 605,
frames even way larger than 601 octets are transmitted even though these
should be considered as oversized, according to the documentation, and
dropped.
Since oversized frame dropping depends on frame size, which is only
known at the EOF stage, and therefore not at SOF when cut-through
forwarding begins, it means that the switch cannot take QSYS_QMAXSDU_CFG_*
into consideration for traffic classes that are cut-through.
Since cut-through forwarding has no UAPI to control it, and the driver
enables it based on the mantra "if we can, then why not", the strategy
is to alter vsc9959_cut_through_fwd() to take into consideration which
tc's have oversize frame dropping enabled, and disable cut-through for
them. Then, from vsc9959_tas_guard_bands_update(), we re-trigger the
cut-through determination process.
There are 2 strategies for vsc9959_cut_through_fwd() to determine
whether a tc has oversized dropping enabled or not. One is to keep a bit
mask of traffic classes per port, and the other is to read back from the
hardware registers (a non-zero value of QSYS_QMAXSDU_CFG_* means the
feature is enabled). We choose reading back from registers, because
struct ocelot_port is shared with drivers (ocelot, seville) that don't
support either cut-through nor tc-taprio, and we don't have a felix
specific extension of struct ocelot_port. Furthermore, reading registers
from the Felix hardware is quite cheap, since they are memory-mapped.
Fixes:
55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Mon, 5 Sep 2022 17:01:23 +0000 (20:01 +0300)]
net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet
The blamed commit broke tc-taprio schedules such as this one:
tc qdisc replace dev $swp1 root taprio \
num_tc 8 \
map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
base-time 0 \
sched-entry S 0x7f 990000 \
sched-entry S 0x80 10000 \
flags 0x2
because the gate entry for TC 7 (S 0x80 10000 ns) now has a static guard
band added earlier than its 'gate close' event, such that packet
overruns won't occur in the worst case of the largest packet possible.
Since guard bands are statically determined based on the per-tc
QSYS_QMAXSDU_CFG_* with a fallback on the port-based QSYS_PORT_MAX_SDU,
we need to discuss what happens with TC 7 depending on kernel version,
since the driver, prior to commit
55a515b1f5a9 ("net: dsa: felix: drop
oversized frames with tc-taprio instead of hanging the port"), did not
touch QSYS_QMAXSDU_CFG_*, and therefore relied on QSYS_PORT_MAX_SDU.
1 (before vsc9959_tas_guard_bands_update): QSYS_PORT_MAX_SDU defaults to
1518, and at gigabit this introduces a static guard band (independent
of packet sizes) of 12144 ns, plus QSYS::HSCH_MISC_CFG.FRM_ADJ (bit
time of 20 octets => 160 ns). But this is larger than the time window
itself, of 10000 ns. So, the queue system never considers a frame with
TC 7 as eligible for transmission, since the gate practically never
opens, and these frames are forever stuck in the TX queues and hang
the port.
2 (after vsc9959_tas_guard_bands_update): Under the sole goal of
enabling oversized frame dropping, we make an effort to set
QSYS_QMAXSDU_CFG_7 to 1230 bytes. But QSYS_QMAXSDU_CFG_7 plays
one more role, which we did not take into account: per-tc static guard
band, expressed in L2 byte time (auto-adjusted for FCS and L1 overhead).
There is a discrepancy between what the driver thinks (that there is
no guard band, and 100% of min_gate_len[tc] is available for egress
scheduling) and what the hardware actually does (crops the equivalent
of QSYS_QMAXSDU_CFG_7 ns out of min_gate_len[tc]). In practice, this
means that the hardware thinks it has exactly 0 ns for scheduling tc 7.
In both cases, even minimum sized Ethernet frames are stuck on egress
rather than being considered for scheduling on TC 7, even if they would
fit given a proper configuration. Considering the current situation,
with vsc9959_tas_guard_bands_update(), frames between 60 octets and 1230
octets in size are not eligible for oversized dropping (because they are
smaller than QSYS_QMAXSDU_CFG_7), but won't be considered as eligible
for scheduling either, because the min_gate_len[7] (10000 ns) minus the
guard band determined by QSYS_QMAXSDU_CFG_7 (1230 octets * 8 ns per
octet == 9840 ns) minus the guard band auto-added for L1 overhead by
QSYS::HSCH_MISC_CFG.FRM_ADJ (20 octets * 8 ns per octet == 160 octets)
leaves 0 ns for scheduling in the queue system proper.
Investigating the hardware behavior, it becomes apparent that the queue
system needs precisely 33 ns of 'gate open' time in order to consider a
frame as eligible for scheduling to a tc. So the solution to this
problem is to amend vsc9959_tas_guard_bands_update(), by giving the
per-tc guard bands less space by exactly 33 ns, just enough for one
frame to be scheduled in that interval. This allows the queue system to
make forward progress for that port-tc, and prevents it from hanging.
Fixes:
297c4de6f780 ("net: dsa: felix: re-enable TAS guard band mode")
Reported-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 7 Sep 2022 11:33:44 +0000 (12:33 +0100)]
Merge branch 'netlink-be-policy'
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Mon, 5 Sep 2022 10:09:37 +0000 (12:09 +0200)]
netfilter: nft_payload: reject out-of-range attributes via policy
Now that nla_policy allows range checks for bigendian data make use of
this to reject such attributes. At this time, reject happens later
from the init or select_ops callbacks, but its prone to errors.
In the future, new attributes can be handled via NLA_POLICY_MAX_BE
and exiting ones can be converted one by one.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Mon, 5 Sep 2022 10:09:36 +0000 (12:09 +0200)]
netlink: introduce NLA_POLICY_MAX_BE
netlink allows to specify allowed ranges for integer types.
Unfortunately, nfnetlink passes integers in big endian, so the existing
NLA_POLICY_MAX() cannot be used.
At the moment, nfnetlink users, such as nf_tables, need to resort to
programmatic checking via helpers such as nft_parse_u32_check().
This is both cumbersome and error prone. This adds NLA_POLICY_MAX_BE
which adds range check support for BE16, BE32 and BE64 integers.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 7 Sep 2022 11:23:25 +0000 (12:23 +0100)]
Merge branch 'sfc-ptp'
Edward Cree says:
====================
sfc: add support for PTP over IPv6 and 802.3
Most recent cards (8000 series and newer) had enough hardware support
for this, but it was not enabled in the driver. The transmission of PTP
packets over these protocols was already added in commit
bd4a2697e5e2
("sfc: use hardware tx timestamps for more than PTP"), but receiving
them was already unsupported so synchronization didn't happen.
These patches add support for timestamping received packets over
IPv6/UPD and IEEE802.3.
v2: fixed weird indentation in efx_ptp_init_filter
v3: fixed bug caused by usage of htons in PTP_EVENT_PORT definition.
It was used in more places, where htons was used too, so using it
2 times leave it again in host order. I didn't detected it in my
tests because it only affected if timestamping through the MC, but
the model I used do it through the MAC. Detected by kernel test
robot <lkp@intel.com>
v4: removed `inline` specifiers from 2 local functions
v5: restored deleted comment with useful explanation about packets
reordering. Deleted useless whitespaces.
====================
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Íñigo Huguet [Mon, 5 Sep 2022 08:23:23 +0000 (10:23 +0200)]
sfc: support PTP over Ethernet
The previous patch add support for PTP over IPv6/UDP (only for 8000
series and newer) and this one add support for PTP over 802.3.
Tested: sync as master and as slave is correct with ptp4l. PTP over IPv4
and IPv6 still works fine.
Suggested-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Íñigo Huguet [Mon, 5 Sep 2022 08:23:22 +0000 (10:23 +0200)]
sfc: support PTP over IPv6/UDP
commit
bd4a2697e5e2 ("sfc: use hardware tx timestamps for more than
PTP") added support for hardware timestamping on TX for cards of the
8000 series and newer, in an effort to provide support for other
transports other than IPv4/UDP.
However, timestamping was still not working on RX for these other
transports. This patch add support for PTP over IPv6/UDP.
Tested: sync as master and as slave is correct using ptp4l from linuxptp
package, both with IPv4 and IPv6.
Suggested-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Íñigo Huguet [Mon, 5 Sep 2022 08:23:21 +0000 (10:23 +0200)]
sfc: allow more flexible way of adding filters for PTP
In preparation for the support of PTP over IPv6/UDP and Ethernet in next
patches, allow a more flexible way of adding and removing RX filters for
PTP. Right now, only 2 filters are allowed, which are the ones needed
for PTP over IPv4/UDP.
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jerry Ray [Fri, 2 Sep 2022 21:30:21 +0000 (16:30 -0500)]
net: dsa: LAN9303: Add basic support for LAN9354
Adding support for the LAN9354 device by allowing it to use
the LAN9303 DSA driver. These devices have the same underlying
access and control methods and from a feature set point of view
the LAN9354 is a superset of the LAN9303.
The MDIO access method has been tested on a SAMA5D3-EDS board
with a LAN9354 RMII daughter card.
While the SPI access method should also be the same, it has not
been tested and as such is not included at this time.
Signed-off-by: Jerry Ray <jerry.ray@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jerry Ray [Fri, 2 Sep 2022 21:30:20 +0000 (16:30 -0500)]
net: dsa: LAN9303: Add early read to sync
Add initial BYTE_ORDER read to sync the 32-bit accesses over the 16-bit
mdio bus to improve driver robustness.
The lan9303 expects two mdio read transactions back-to-back to read a
32-bit register. The first read transaction causes the other half of the
32-bit register to get latched. The subsequent read returns the latched
second half of the 32-bit read. The BYTE_ORDER register is an exception to
this rule. As it is a constant value, there is no need to latch the second
half. We read this register first in case there were reads during the boot
loader process that might have occurred prior to this driver taking over
ownership of accessing this device.
This patch has been tested on the SAMA5D3-EDS with a LAN9303 RMII daughter
card.
Signed-off-by: Jerry Ray <jerry.ray@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Romain Naour [Fri, 2 Sep 2022 10:16:10 +0000 (12:16 +0200)]
net: dsa: microchip: add regmap_range for KSZ9896 chip
Add register validation for KSZ9896.
Signed-off-by: Romain Naour <romain.naour@skf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Romain Naour [Fri, 2 Sep 2022 10:16:09 +0000 (12:16 +0200)]
net: dsa: microchip: ksz9477: remove 0x033C and 0x033D addresses from regmap_access_tables
According to the KSZ9477S datasheet, there is no global register
at 0x033C and 0x033D addresses.
Signed-off-by: Romain Naour <romain.naour@skf.com>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Romain Naour [Fri, 2 Sep 2022 10:16:08 +0000 (12:16 +0200)]
net: dsa: microchip: add KSZ9896 to KSZ9477 I2C driver
Add support for the KSZ9896 6-port Gigabit Ethernet Switch to the
ksz9477 driver. The KSZ9896 supports both SPI (already in) and I2C.
Signed-off-by: Romain Naour <romain.naour@skf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Romain Naour [Fri, 2 Sep 2022 10:16:07 +0000 (12:16 +0200)]
net: dsa: microchip: add KSZ9896 switch support
Add support for the KSZ9896 6-port Gigabit Ethernet Switch to the
ksz9477 driver.
Although the KSZ9896 is already listed in the device tree binding
documentation since
a1c0ed24fe9b (dt-bindings: net: dsa: document
additional Microchip KSZ9477 family switches) the chip id
(0x00989600) is not recognized by ksz_switch_detect() and rejected
by the driver.
The KSZ9896 is similar to KSZ9897 but has only one configurable
MII/RMII/RGMII/GMII cpu port.
Signed-off-by: Romain Naour <romain.naour@skf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
chen zhang [Wed, 7 Sep 2022 02:32:55 +0000 (10:32 +0800)]
efi/x86: libstub: remove unused variable
The variable "has_system_memory" is unused in function
‘adjust_memory_range_protection’, remove it.
Signed-off-by: chen zhang <chenzhang@kylinos.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
David Howells [Tue, 6 Sep 2022 21:09:11 +0000 (22:09 +0100)]
afs: Return -EAGAIN, not -EREMOTEIO, when a file already locked
When trying to get a file lock on an AFS file, the server may return
UAEAGAIN to indicate that the lock is already held. This is currently
translated by the default path to -EREMOTEIO.
Translate it instead to -EAGAIN so that we know we can retry it.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey E Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/166075761334.3533338.2591992675160918098.stgit@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 7 Sep 2022 01:27:05 +0000 (21:27 -0400)]
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fix from Russell King:
"Just one fix for now for the AMBA bus code from Isaac Manjarres"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9229/1: amba: Fix use-after-free in amba_read_periphid()
Paolo Abeni [Tue, 6 Sep 2022 21:21:14 +0000 (23:21 +0200)]
Merge https://git./linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-09-05
The following pull-request contains BPF updates for your *net-next* tree.
We've added 106 non-merge commits during the last 18 day(s) which contain
a total of 159 files changed, 5225 insertions(+), 1358 deletions(-).
There are two small merge conflicts, resolve them as follows:
1) tools/testing/selftests/bpf/DENYLIST.s390x
Commit
27e23836ce22 ("selftests/bpf: Add lru_bug to s390x deny list") in
bpf tree was needed to get BPF CI green on s390x, but it conflicted with
newly added tests on bpf-next. Resolve by adding both hunks, result:
[...]
lru_bug # prog 'printk': failed to auto-attach: -524
setget_sockopt # attach unexpected error: -524 (trampoline)
cb_refs # expected error message unexpected error: -524 (trampoline)
cgroup_hierarchical_stats # JIT does not support calling kernel function (kfunc)
htab_update # failed to attach: ERROR: strerror_r(-524)=22 (trampoline)
[...]
2) net/core/filter.c
Commit
1227c1771dd2 ("net: Fix data-races around sysctl_[rw]mem_(max|default).")
from net tree conflicts with commit
29003875bd5b ("bpf: Change bpf_setsockopt(SOL_SOCKET)
to reuse sk_setsockopt()") from bpf-next tree. Take the code as it is from
bpf-next tree, result:
[...]
if (getopt) {
if (optname == SO_BINDTODEVICE)
return -EINVAL;
return sk_getsockopt(sk, SOL_SOCKET, optname,
KERNEL_SOCKPTR(optval),
KERNEL_SOCKPTR(optlen));
}
return sk_setsockopt(sk, SOL_SOCKET, optname,
KERNEL_SOCKPTR(optval), *optlen);
[...]
The main changes are:
1) Add any-context BPF specific memory allocator which is useful in particular for BPF
tracing with bonus of performance equal to full prealloc, from Alexei Starovoitov.
2) Big batch to remove duplicated code from bpf_{get,set}sockopt() helpers as an effort
to reuse the existing core socket code as much as possible, from Martin KaFai Lau.
3) Extend BPF flow dissector for BPF programs to just augment the in-kernel dissector
with custom logic. In other words, allow for partial replacement, from Shmulik Ladkani.
4) Add a new cgroup iterator to BPF with different traversal options, from Hao Luo.
5) Support for BPF to collect hierarchical cgroup statistics efficiently through BPF
integration with the rstat framework, from Yosry Ahmed.
6) Support bpf_{g,s}et_retval() under more BPF cgroup hooks, from Stanislav Fomichev.
7) BPF hash table and local storages fixes under fully preemptible kernel, from Hou Tao.
8) Add various improvements to BPF selftests and libbpf for compilation with gcc BPF
backend, from James Hilliard.
9) Fix verifier helper permissions and reference state management for synchronous
callbacks, from Kumar Kartikeya Dwivedi.
10) Add support for BPF selftest's xskxceiver to also be used against real devices that
support MAC loopback, from Maciej Fijalkowski.
11) Various fixes to the bpf-helpers(7) man page generation script, from Quentin Monnet.
12) Document BPF verifier's tnum_in(tnum_range(), ...) gotchas, from Shung-Hsi Yu.
13) Various minor misc improvements all over the place.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (106 commits)
bpf: Optimize rcu_barrier usage between hash map and bpf_mem_alloc.
bpf: Remove usage of kmem_cache from bpf_mem_cache.
bpf: Remove prealloc-only restriction for sleepable bpf programs.
bpf: Prepare bpf_mem_alloc to be used by sleepable bpf programs.
bpf: Remove tracing program restriction on map types
bpf: Convert percpu hash map to per-cpu bpf_mem_alloc.
bpf: Add percpu allocation support to bpf_mem_alloc.
bpf: Batch call_rcu callbacks instead of SLAB_TYPESAFE_BY_RCU.
bpf: Adjust low/high watermarks in bpf_mem_cache
bpf: Optimize call_rcu in non-preallocated hash map.
bpf: Optimize element count in non-preallocated hash map.
bpf: Relax the requirement to use preallocated hash maps in tracing progs.
samples/bpf: Reduce syscall overhead in map_perf_test.
selftests/bpf: Improve test coverage of test_maps
bpf: Convert hash map to bpf_mem_alloc.
bpf: Introduce any context BPF specific memory allocator.
selftest/bpf: Add test for bpf_getsockopt()
bpf: Change bpf_getsockopt(SOL_IPV6) to reuse do_ipv6_getsockopt()
bpf: Change bpf_getsockopt(SOL_IP) to reuse do_ip_getsockopt()
bpf: Change bpf_getsockopt(SOL_TCP) to reuse do_tcp_getsockopt()
...
====================
Link: https://lore.kernel.org/r/20220905161136.9150-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Michal Jaron [Thu, 18 Aug 2022 11:32:33 +0000 (13:32 +0200)]
iavf: Fix race between iavf_close and iavf_reset_task
During stress tests with adding VF to namespace and changing vf's
trust there was a race between iavf_reset_task and iavf_close.
Sometimes when IAVF_FLAG_AQ_DISABLE_QUEUES from iavf_close was sent
to PF after reset and before IAVF_AQ_GET_CONFIG was sent then PF
returns error IAVF_NOT_SUPPORTED to disable queues request and
following requests. There is need to get_config before other
aq_required will be send but iavf_close clears all flags, if
get_config was not sent before iavf_close, then it will not be send
at all.
In case when IAVF_FLAG_AQ_GET_OFFLOAD_VLAN_V2_CAPS was sent before
IAVF_FLAG_AQ_DISABLE_QUEUES then there was rtnl_lock deadlock
between iavf_close and iavf_adminq_task until iavf_close timeouts
and disable queues was sent after iavf_close ends.
There was also a problem with sending delete/add filters.
Sometimes when filters was not yet added to PF and in
iavf_close all filters was set to remove there might be a try
to remove nonexistent filters on PF.
Add aq_required_tmp to save aq_required flags and send them after
disable_queues will be handled. Clear flags given to iavf_down
different than IAVF_FLAG_AQ_GET_CONFIG as this flag is necessary
to sent other aq_required. Remove some flags that we don't
want to send as we are in iavf_close and we want to disable
interface. Remove filters which was not yet sent and send del
filters flags only when there are filters to remove.
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Christophe JAILLET [Sun, 4 Sep 2022 14:22:46 +0000 (16:22 +0200)]
ice: Simplify memory allocation in ice_sched_init_port()
'buf' is locale to the ice_sched_init_port() function.
There is no point in using devm_kzalloc()/devm_kfree().
use kzalloc()/kfree() instead.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Christophe JAILLET [Sun, 4 Sep 2022 14:18:02 +0000 (16:18 +0200)]
ice: switch: Simplify memory allocation
'rbuf' is locale to the ice_get_initial_sw_cfg() function.
There is no point in using devm_kzalloc()/devm_kfree().
use kzalloc()/kfree() instead.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Paul Greenwalt [Wed, 24 Aug 2022 20:28:40 +0000 (13:28 -0700)]
ice: add helper function to check FW API version
Several functions in ice_common.c check the firmware API version to see if
the current API version meets some minimum requirement.
Improve the readability of these checks by introducing
ice_is_fw_api_min_ver, a helper function to perform that check.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Michal Michalik [Tue, 23 Aug 2022 11:56:26 +0000 (13:56 +0200)]
ice: Check if reset in progress while waiting for offsets
Occasionally while waiting to valid offsets from hardware we get reset.
Add check for reset before proceeding to execute scheduled work.
Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tony Nguyen [Mon, 22 Aug 2022 18:56:54 +0000 (11:56 -0700)]
ice: Allow operation with reduced device MSI-X
The driver currently takes an all or nothing approach for device MSI-X
vectors. Meaning if it does not get its full allocation, it will fail and
not load. There is no reason it can't work with a reduced number of MSI-X
vectors. Take a similar approach as commit
741106f7bd8d ("ice: Improve
MSI-X fallback logic") and, instead, adjust the MSI-X request to make use
of what is available.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Petr Oros <poros@redhat.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Jaroslaw Gawin [Tue, 23 Aug 2022 08:28:03 +0000 (10:28 +0200)]
i40e: add description and modify interrupts configuration procedure
Add description for values written into registers QINT_XXXX
and small cosmetic changes for MSI/LEGACY interrupts
configuration in the same way as for MSI-X.
Descriptions confirm the code is written correctly and
make the code clear. Small cosmetic changes for MSI/LEGACY
interrupts make code clear in the same manner as for MSI-X
interrupts.
Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stanislaw Grzeszczak [Mon, 29 Aug 2022 11:59:46 +0000 (13:59 +0200)]
i40e: Add basic support for I710 devices
Intel introduces a new line of 1G ethernet adapters with Device ID 0x0DD2
Signed-off-by: Stanislaw Grzeszczak <stanislaw.a.grzeszczak@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Linus Torvalds [Tue, 6 Sep 2022 19:19:45 +0000 (15:19 -0400)]
Merge tag 'erofs-for-6.0-rc5-fixes' of git://git./linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Fix return codes in erofs_fscache_{meta_,}read_folio error paths
- Fix potential wrong pcluster sizes for later non-4K lclusters
- Fix in-memory pcluster use-after-free on UP platforms
* tag 'erofs-for-6.0-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix pcluster use-after-free on UP platforms
erofs: avoid the potentially wrong m_plen for big pcluster
erofs: fix error return code in erofs_fscache_{meta_,}read_folio
jerry.meng [Mon, 5 Sep 2022 01:24:52 +0000 (09:24 +0800)]
net: usb: qmi_wwan: add Quectel RM520N
add support for Quectel RM520N which is based on Qualcomm SDX62 chip.
0x0801: DIAG + NMEA + AT + MODEM + RMNET
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0801 Rev= 5.04
S: Manufacturer=Quectel
S: Product=RM520N-GL
S: SerialNumber=
384af524
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: jerry.meng <jerry-meng@foxmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/tencent_E50CA8A206904897C2D20DDAE90731183C05@qq.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Christian Marangi [Sun, 4 Sep 2022 21:53:19 +0000 (23:53 +0200)]
net: dsa: qca8k: fix NULL pointer dereference for of_device_get_match_data
of_device_get_match_data is called on priv->dev before priv->dev is
actually set. Move of_device_get_match_data after priv->dev is correctly
set to fix this kernel panic.
Fixes:
3bb0844e7bcd ("net: dsa: qca8k: cache match data to speed up access")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220904215319.13070-1-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Neal Cardwell [Sat, 3 Sep 2022 12:10:23 +0000 (08:10 -0400)]
tcp: fix early ETIMEDOUT after spurious non-SACK RTO
Fix a bug reported and analyzed by Nagaraj Arankal, where the handling
of a spurious non-SACK RTO could cause a connection to fail to clear
retrans_stamp, causing a later RTO to very prematurely time out the
connection with ETIMEDOUT.
Here is the buggy scenario, expanding upon Nagaraj Arankal's excellent
report:
(*1) Send one data packet on a non-SACK connection
(*2) Because no ACK packet is received, the packet is retransmitted
and we enter CA_Loss; but this retransmission is spurious.
(*3) The ACK for the original data is received. The transmitted packet
is acknowledged. The TCP timestamp is before the retrans_stamp,
so tcp_may_undo() returns true, and tcp_try_undo_loss() returns
true without changing state to Open (because tcp_is_sack() is
false), and tcp_process_loss() returns without calling
tcp_try_undo_recovery(). Normally after undoing a CA_Loss
episode, tcp_fastretrans_alert() would see that the connection
has returned to CA_Open and fall through and call
tcp_try_to_open(), which would set retrans_stamp to 0. However,
for non-SACK connections we hold the connection in CA_Loss, so do
not fall through to call tcp_try_to_open() and do not set
retrans_stamp to 0. So retrans_stamp is (erroneously) still
non-zero.
At this point the first "retransmission event" has passed and
been recovered from. Any future retransmission is a completely
new "event". However, retrans_stamp is erroneously still
set. (And we are still in CA_Loss, which is correct.)
(*4) After 16 minutes (to correspond with tcp_retries2=15), a new data
packet is sent. Note: No data is transmitted between (*3) and
(*4) and we disabled keep alives.
The socket's timeout SHOULD be calculated from this point in
time, but instead it's calculated from the prior "event" 16
minutes ago (step (*2)).
(*5) Because no ACK packet is received, the packet is retransmitted.
(*6) At the time of the 2nd retransmission, the socket returns
ETIMEDOUT, prematurely, because retrans_stamp is (erroneously)
too far in the past (set at the time of (*2)).
This commit fixes this bug by ensuring that we reuse in
tcp_try_undo_loss() the same careful logic for non-SACK connections
that we have in tcp_try_undo_recovery(). To avoid duplicating logic,
we factor out that logic into a new
tcp_is_non_sack_preventing_reopen() helper and call that helper from
both undo functions.
Fixes:
da34ac7626b5 ("tcp: only undo on partial ACKs in CA_Loss")
Reported-by: Nagaraj Arankal <nagaraj.p.arankal@hpe.com>
Link: https://lore.kernel.org/all/SJ0PR84MB1847BE6C24D274C46A1B9B0EB27A9@SJ0PR84MB1847.NAMPRD84.PROD.OUTLOOK.COM/
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220903121023.866900-1-ncardwell.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sergei Antonov [Fri, 2 Sep 2022 12:50:37 +0000 (15:50 +0300)]
net: moxa: fix endianness-related issues from 'sparse'
Sparse checker found two endianness-related issues:
.../moxart_ether.c:34:15: warning: incorrect type in assignment (different base types)
.../moxart_ether.c:34:15: expected unsigned int [usertype]
.../moxart_ether.c:34:15: got restricted __le32 [usertype]
.../moxart_ether.c:39:16: warning: cast to restricted __le32
Fix them by using __le32 type instead of u32.
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Link: https://lore.kernel.org/r/20220902125037.1480268-1-saproj@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sergei Antonov [Fri, 2 Sep 2022 11:37:49 +0000 (14:37 +0300)]
net: ftmac100: fix endianness-related issues from 'sparse'
Sparse found a number of endianness-related issues of these kinds:
.../ftmac100.c:192:32: warning: restricted __le32 degrades to integer
.../ftmac100.c:208:23: warning: incorrect type in assignment (different base types)
.../ftmac100.c:208:23: expected unsigned int rxdes0
.../ftmac100.c:208:23: got restricted __le32 [usertype]
.../ftmac100.c:249:23: warning: invalid assignment: &=
.../ftmac100.c:249:23: left side has type unsigned int
.../ftmac100.c:249:23: right side has type restricted __le32
.../ftmac100.c:527:16: warning: cast to restricted __le32
Change type of some fields from 'unsigned int' to '__le32' to fix it.
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220902113749.1408562-1-saproj@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Horatiu Vultur [Fri, 2 Sep 2022 11:15:48 +0000 (13:15 +0200)]
net: lan966x: Extend lan966x with RGMII support
Extend lan966x with RGMII support. The MAC supports all RGMII_* modes.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220902111548.614525-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Linus Torvalds [Mon, 5 Sep 2022 21:44:48 +0000 (17:44 -0400)]
Merge tag 'soc-fixes-6.0-rc4' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are the expected fixes for the SoC tree. I have let the patches
pile up a little too long, so this is bigger than I would have liked.
- Minor build fixes for Broadcom STB and NXP i.MX8M SoCs as well\ as
TEE firmware
- Updates to the MAINTAINERS file for the PolarFire SoC
- Minor DT fixes for Renesas White Hawk and Arm Versatile and Juno
platforms
- A fix for a missing dependnecy in the NXP DPIO driver
- Broadcom BCA fixes to the newly added devicetree files
- Multiple fixes for Microchip AT91 based SoCs, dealing with
self-refresh timings and regulator settings in DT
- Several DT fixes for NXP i.MX platforms, dealing with incorrect
GPIO settings, extraneous nodes, and a wrong clock setting"
* tag 'soc-fixes-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (45 commits)
soc: fsl: select FSL_GUTS driver for DPIO
ARM: dts: at91: sama5d2_icp: don't keep vdd_other enabled all the time
ARM: dts: at91: sama5d27_wlsom1: don't keep ldo2 enabled all the time
ARM: dts: at91: sama7g5ek: specify proper regulator output ranges
ARM: dts: at91: sama5d2_icp: specify proper regulator output ranges
ARM: dts: at91: sama5d27_wlsom1: specify proper regulator output ranges
ARM: at91: pm: fix DDR recalibration when resuming from backup and self-refresh
ARM: at91: pm: fix self-refresh for sama7g5
soc: brcmstb: pm-arm: Fix refcount leak and __iomem leak bugs
ARM: configs: at91: remove CONFIG_MICROCHIP_PIT64B
ARM: ixp4xx: fix typos in comments
arm64: dts: renesas: r8a779g0: Fix HSCIF0 interrupt number
tee: fix compiler warning in tee_shm_register()
arm64: dts: freescale: verdin-imx8mp: fix atmel_mxt_ts reset polarity
arm64: dts: freescale: verdin-imx8mm: fix atmel_mxt_ts reset polarity
arm64: dts: imx8mp: Fix I2C5 GPIO assignment on i.MX8M Plus DHCOM
arm64: dts: imx8mm-venice-gw7901: fix port/phy validation
arm64: dts: verdin-imx8mm: add otg2 pd to usbphy
soc: imx: gpcv2: Assert reset before ungating clock
arm64: dts: ls1028a-qds-65bb: don't use in-band autoneg for 2500base-x
...
Gao Xiang [Fri, 2 Sep 2022 04:57:10 +0000 (12:57 +0800)]
erofs: fix pcluster use-after-free on UP platforms
During stress testing with CONFIG_SMP disabled, KASAN reports as below:
==================================================================
BUG: KASAN: use-after-free in __mutex_lock+0xe5/0xc30
Read of size 8 at addr
ffff8881094223f8 by task stress/7789
CPU: 0 PID: 7789 Comm: stress Not tainted
6.0.0-rc1-00002-g0d53d2e882f9 #3
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Call Trace:
<TASK>
..
__mutex_lock+0xe5/0xc30
..
z_erofs_do_read_page+0x8ce/0x1560
..
z_erofs_readahead+0x31c/0x580
..
Freed by task 7787
kasan_save_stack+0x1e/0x40
kasan_set_track+0x20/0x30
kasan_set_free_info+0x20/0x40
__kasan_slab_free+0x10c/0x190
kmem_cache_free+0xed/0x380
rcu_core+0x3d5/0xc90
__do_softirq+0x12d/0x389
Last potentially related work creation:
kasan_save_stack+0x1e/0x40
__kasan_record_aux_stack+0x97/0xb0
call_rcu+0x3d/0x3f0
erofs_shrink_workstation+0x11f/0x210
erofs_shrink_scan+0xdc/0x170
shrink_slab.constprop.0+0x296/0x530
drop_slab+0x1c/0x70
drop_caches_sysctl_handler+0x70/0x80
proc_sys_call_handler+0x20a/0x2f0
vfs_write+0x555/0x6c0
ksys_write+0xbe/0x160
do_syscall_64+0x3b/0x90
The root cause is that erofs_workgroup_unfreeze() doesn't reset to
orig_val thus it causes a race that the pcluster reuses unexpectedly
before freeing.
Since UP platforms are quite rare now, such path becomes unnecessary.
Let's drop such specific-designed path directly instead.
Fixes:
73f5c66df3e2 ("staging: erofs: fix `erofs_workgroup_{try_to_freeze, unfreeze}'")
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220902045710.109530-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Yue Hu [Fri, 12 Aug 2022 06:01:50 +0000 (14:01 +0800)]
erofs: avoid the potentially wrong m_plen for big pcluster
Actually, 'compressedlcs' stores compressed block count rather than
lcluster count. Therefore, the number of bits for shifting the count
should be 'LOG_BLOCK_SIZE' rather than 'lclusterbits' although current
lcluster size is 4K.
The value of 'm_plen' will be wrong once we enable the non 4K-sized
lcluster.
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220812060150.8510-1-huyue2@coolpad.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Sun Ke [Mon, 15 Aug 2022 03:48:29 +0000 (11:48 +0800)]
erofs: fix error return code in erofs_fscache_{meta_,}read_folio
If erofs_fscache_alloc_request fail and then goto out, it will return 0.
it should return a negative error code instead of 0.
Fixes:
d435d53228dd ("erofs: change to use asynchronous io for fscache readpage/readahead")
Signed-off-by: Sun Ke <sunke32@huawei.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220815034829.3940803-1-sunke32@huawei.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Heiner Kallweit [Sat, 3 Sep 2022 11:15:13 +0000 (13:15 +0200)]
r8169: remove not needed net_ratelimit() check
We're not in a hot path and don't want to miss this message,
therefore remove the net_ratelimit() check.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Sat, 3 Sep 2022 04:37:49 +0000 (21:37 -0700)]
netlink: Bounds-check struct nlmsgerr creation
In preparation for FORTIFY_SOURCE doing bounds-check on memcpy(),
switch from __nlmsg_put to nlmsg_put(), and explain the bounds check
for dealing with the memcpy() across a composite flexible array struct.
Avoids this future run-time warning:
memcpy: detected field-spanning write (size 32) of single field "&errmsg->msg" at net/netlink/af_netlink.c:2447 (size 16)
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Florian Westphal <fw@strlen.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: syzbot <syzkaller@googlegroups.com>
Cc: netfilter-devel@vger.kernel.org
Cc: coreteam@netfilter.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220901071336.1418572-1-keescook@chromium.org
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 5 Sep 2022 13:43:18 +0000 (14:43 +0100)]
Merge tag 'for-net-2022-09-02' of git://git./linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix regression preventing ACL packet transmission
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Mon, 5 Sep 2022 13:33:07 +0000 (15:33 +0200)]
Merge branch 'bpf-allocator'
Alexei Starovoitov says:
====================
Introduce any context BPF specific memory allocator.
Tracing BPF programs can attach to kprobe and fentry. Hence they run in
unknown context where calling plain kmalloc() might not be safe. Front-end
kmalloc() with per-cpu cache of free elements. Refill this cache asynchronously
from irq_work.
Major achievements enabled by bpf_mem_alloc:
- Dynamically allocated hash maps used to be 10 times slower than fully
preallocated. With bpf_mem_alloc and subsequent optimizations the speed
of dynamic maps is equal to full prealloc.
- Tracing bpf programs can use dynamically allocated hash maps. Potentially
saving lots of memory. Typical hash map is sparsely populated.
- Sleepable bpf programs can used dynamically allocated hash maps.
Future work:
- Expose bpf_mem_alloc as uapi FD to be used in dynptr_alloc, kptr_alloc
- Convert lru map to bpf_mem_alloc
- Further cleanup htab code. Example: htab_use_raw_lock can be removed.
Changelog:
v5->v6:
- Debugged the reason for selftests/bpf/test_maps ooming in a small VM that BPF CI is using.
Added patch 16 that optimizes the usage of rcu_barrier-s between bpf_mem_alloc and
hash map. It drastically improved the speed of htab destruction.
v4->v5:
- Fixed missing migrate_disable in hash tab free path (Daniel)
- Replaced impossible "memory leak" with WARN_ON_ONCE (Martin)
- Dropped sysctl kernel.bpf_force_dyn_alloc patch (Daniel)
- Added Andrii's ack
- Added new patch 15 that removes kmem_cache usage from bpf_mem_alloc.
It saves memory, speeds up map create/destroy operations
while maintains hash map update/delete performance.
v3->v4:
- fix build issue due to missing local.h on 32-bit arch
- add Kumar's ack
- proposal for next steps from Delyan:
https://lore.kernel.org/bpf/
d3f76b27f4e55ec9e400ae8dcaecbb702a4932e8.camel@fb.com/
v2->v3:
- Rewrote the free_list algorithm based on discussions with Kumar. Patch 1.
- Allowed sleepable bpf progs use dynamically allocated maps. Patches 13 and 14.
- Added sysctl to force bpf_mem_alloc in hash map even if pre-alloc is
requested to reduce memory consumption. Patch 15.
- Fix: zero-fill percpu allocation
- Single rcu_barrier at the end instead of each cpu during bpf_mem_alloc destruction
v2 thread:
https://lore.kernel.org/bpf/
20220817210419.95560-1-alexei.starovoitov@gmail.com/
v1->v2:
- Moved unsafe direct call_rcu() from hash map into safe place inside bpf_mem_alloc. Patches 7 and 9.
- Optimized atomic_inc/dec in hash map with percpu_counter. Patch 6.
- Tuned watermarks per allocation size. Patch 8
- Adopted this approach to per-cpu allocation. Patch 10.
- Fully converted hash map to bpf_mem_alloc. Patch 11.
- Removed tracing prog restriction on map types. Combination of all patches and final patch 12.
v1 thread:
https://lore.kernel.org/bpf/
20220623003230.37497-1-alexei.starovoitov@gmail.com/
LWN article:
https://lwn.net/Articles/899274/
====================
Link: https://lore.kernel.org/r/
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Alexei Starovoitov [Fri, 2 Sep 2022 21:10:58 +0000 (14:10 -0700)]
bpf: Optimize rcu_barrier usage between hash map and bpf_mem_alloc.
User space might be creating and destroying a lot of hash maps. Synchronous
rcu_barrier-s in a destruction path of hash map delay freeing of hash buckets
and other map memory and may cause artificial OOM situation under stress.
Optimize rcu_barrier usage between bpf hash map and bpf_mem_alloc:
- remove rcu_barrier from hash map, since htab doesn't use call_rcu
directly and there are no callback to wait for.
- bpf_mem_alloc has call_rcu_in_progress flag that indicates pending callbacks.
Use it to avoid barriers in fast path.
- When barriers are needed copy bpf_mem_alloc into temp structure
and wait for rcu barrier-s in the worker to let the rest of
hash map freeing to proceed.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220902211058.60789-17-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 2 Sep 2022 21:10:57 +0000 (14:10 -0700)]
bpf: Remove usage of kmem_cache from bpf_mem_cache.
For bpf_mem_cache based hash maps the following stress test:
for (i = 1; i <= 512; i <<= 1)
for (j = 1; j <= 1 << 18; j <<= 1)
fd = bpf_map_create(BPF_MAP_TYPE_HASH, NULL, i, j, 2, 0);
creates many kmem_cache-s that are not mergeable in debug kernels
and consume unnecessary amount of memory.
Turned out bpf_mem_cache's free_list logic does batching well,
so usage of kmem_cache for fixes size allocations doesn't bring
any performance benefits vs normal kmalloc.
Hence get rid of kmem_cache in bpf_mem_cache.
That saves memory, speeds up map create/destroy operations,
while maintains hash map update/delete performance.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220902211058.60789-16-alexei.starovoitov@gmail.com