OSDN Git Service
Chris Wilson [Thu, 11 Jul 2019 16:24:15 +0000 (17:24 +0100)]
drm/i915/guc: Drop redundant ctx param from kerneldoc
drivers/gpu/drm/i915/intel_guc_submission.c:799: warning: Excess function parameter 'ctx' description in 'guc_client_alloc'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711162415.2938-1-chris@chris-wilson.co.uk
Ville Syrjälä [Wed, 10 Jul 2019 13:49:37 +0000 (16:49 +0300)]
drm/i915: Don't pass stack garbage to pcode in the second data register
Zero initialize val2 so that we don't pass stack garbage to
the pcode qgv read command. I suspect in this case pcode
just ignores the initial value in that registers, but better
safe than sorry.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710134937.25835-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 1 Jul 2019 16:05:50 +0000 (19:05 +0300)]
drm/i915: Use intel_ types in intel_atomic_commit()
Make life less annoying by favoring the intel_ types over
the drm_ types in intel_atomic_commit().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190701160550.24205-6-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Ville Syrjälä [Mon, 1 Jul 2019 16:05:49 +0000 (19:05 +0300)]
drm/i915: Use intel_ types in intel_{lock,modeset}_all_pipes()
Streamline the code a bit by using intel_ types instead of the
drm_ types.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190701160550.24205-5-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Ville Syrjälä [Mon, 1 Jul 2019 16:05:48 +0000 (19:05 +0300)]
drm/i915: Polish intel_atomic_track_fbs()
Streamline the code a bit by using intel_ types instead of drm_
types in intel_atomic_track_fbs().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190701160550.24205-4-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Ville Syrjälä [Mon, 1 Jul 2019 16:05:47 +0000 (19:05 +0300)]
drm/i915: Polish intel_shared_dpll_swap_state()
Use swap() instead of hand rolling it in intel_shared_dpll_swap_state(),
and pass in the intel_atomic_state instead of drm_atomic_state. Makes
the code less convoluted.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190701160550.24205-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Ville Syrjälä [Mon, 1 Jul 2019 16:05:46 +0000 (19:05 +0300)]
drm/i915: Simplify modeset_get_crtc_power_domains() arguments
Pass just the crtc state to modeset_get_crtc_power_domains(). We
can get the crtc from therein.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190701160550.24205-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Ville Syrjälä [Mon, 1 Jul 2019 16:05:45 +0000 (19:05 +0300)]
drm/i915: Check crtc_state->wm.need_postvbl_update before grabbing wm.mutex
wm.mutex does not protect the crtc state so no point in grabbing it
to check crtc_state->wm.need_postvbl_update.
Also do a bit of s/intel_crtc/crtc/ while at it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190701160550.24205-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Ville Syrjälä [Mon, 1 Jul 2019 16:15:34 +0000 (19:15 +0300)]
drm/i915: Use the "display core" power domain in vlv/chv set_cdclk()
The PFI credit programming performed during cdclk change on vlv/chv
requires access to a register in the disp2d power well. So far
we've abused pipe-A power domain for this, but now we have the
more appropriate "display core" domain so let's make use of it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190701161534.6671-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Chris Wilson [Thu, 11 Jul 2019 06:51:59 +0000 (07:51 +0100)]
drm/i915/selftests: Hold the vma manager lock while modifying mmap_offset
Right idea, wrong lock. We already drop struct_mutex before we free the
mmap_offset when freeing the object, so we need to take the vma manager
lock when manipulating the mmap_offset address space for our selftests.
Fixes:
8221d21b0664 ("drm/i915/selftests: Lock the drm_mm while modifying")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711065215.4004-2-chris@chris-wilson.co.uk
Ville Syrjälä [Wed, 19 Jun 2019 18:03:07 +0000 (21:03 +0300)]
drm/i915/sdvo: Fix handling if zero hbuf size
The spec says:
"A value of 0 indicates that this buffer does not exist"
So we should not convert a hbuf_size of 0 into 1.
Also pull the relevant code into a helper to avoid making the
same mistake multiple times.
And while at it fix the debug prints to not say "hbuf_len" twice.
v2: s/%i/%u/ in the debug (Imre)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619180312.31817-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Daniele Ceraolo Spurio [Wed, 10 Jul 2019 00:54:27 +0000 (17:54 -0700)]
drm/i915/guc: Simplify guc client
We originally added support, in some cases partial, for different modes
of operations via guc clients:
- proxy vs direct submission;
- variable engine mask per-client.
We only ever used one flow (all submissions via a single proxy), so the
other code paths haven't been exercised and are most likely
non-functional. The guc firmware interface is also in the process of
being updated to better fit the i915 flow and our client abstraction
will need to change accordingly (or possibly go away entirely), so these
old unused paths can be considered dead and removed.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Acked-by: Matthew Brost <Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710005437.3496-3-daniele.ceraolospurio@intel.com
Chris Wilson [Wed, 10 Jul 2019 00:54:26 +0000 (17:54 -0700)]
drm/i915/guc: Remove preemption support for current fw
Preemption via GuC submission is not being supported with its current
legacy incarnation. The current FW does support a similar pre-emption
flow via H2G, but it is class-based instead of being instance-based,
which doesn't fit well with the i915 tracking. To fix this, the
firmware is being updated to better support our needs with a new flow,
so we can safely remove the old code.
v2 (Daniele): resurrect & rebase, reword commit message, remove
preempt_context as well
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710005437.3496-2-daniele.ceraolospurio@intel.com
Chris Wilson [Wed, 10 Jul 2019 16:14:13 +0000 (17:14 +0100)]
drm/i915/selftests: Ensure we don't clamp a random offset to 32b
Specify that we do want a 64b value for sizeof(u32) as we want to
compute the mask of the upper 62bits.
v2: Use round_down() for automatic type promotion
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710161413.7115-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 10 Jul 2019 20:04:28 +0000 (21:04 +0100)]
drm/i915/gt: Drop the duplicate icl workaround
The extra w/a was revived in the backmerge that was meant to fix it!
Fixes:
88c90e800675 ("Merge drm/drm-next into drm-intel-next-queued")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710200428.3275-1-chris@chris-wilson.co.uk
Matt Roper [Tue, 9 Jul 2019 18:39:34 +0000 (11:39 -0700)]
drm/i915/ehl: Enable DDI-D
EHL has four DDI's (DDI-A and DDI-D share combo PHY A).
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709183934.445-6-matthew.d.roper@intel.com
Matt Roper [Tue, 9 Jul 2019 18:39:33 +0000 (11:39 -0700)]
drm/i915: Transition port type checks to phy checks
Transition the remaining uses of intel_port_is_* over to the equivalent
intel_phy_is_* functions and drop the port functions.
v5: Fix a call in a debug function that's only called when
CONFIG_DRM_I915_DEBUG_RUNTIME_PM is on. (CI)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709183934.445-5-matthew.d.roper@intel.com
Matt Roper [Tue, 9 Jul 2019 18:39:32 +0000 (11:39 -0700)]
drm/i915/gen11: Convert combo PHY logic to use new 'enum phy' namespace
Convert the code that operates directly on gen11 combo PHY's to use the
new namespace. Combo PHY registers are those named "ICL_PORT_*" plus
ICL_DPHY_CHKN.
Note that a lot of the PHY programming happens in the MIPI DSI code.
For clarity I've added a for_each_dsi_phy() to loop over the phys used
by DSI. Since DSI always uses A & B on gen11, port=phy in all cases so
it doesn't actually matter which form we use in the DSI code. I've used
the phy iterator in code that's explicitly working with the combo PHY,
but left the rest of the DSI code using the port iterator and namespace
to minimize patch deltas. We can switch the rest of the DSI code over
to use phy terminology later if this winds up being too confusing.
v6: Drop an include of drm/i915_drm.h; that was previously included just
for the definition of 'enum port' which this patch removes the need
for. (Jose)
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709183934.445-4-matthew.d.roper@intel.com
Matt Roper [Tue, 9 Jul 2019 18:39:31 +0000 (11:39 -0700)]
drm/i915/gen11: Program ICL_DPCLKA_CFGCR0 according to PHY
Although the register name implies that it operates on DDI's,
DPCLKA_CFGCR0_ICL actually needs to be programmed according to the PHY
that's in use. I.e., when using EHL's DDI-D on combo PHY A, the bits
described as "port A" in the bspec are what we need to set. The bspec
clarifies:
"[For EHL] DDID clock tied to DDIA clock, so DPCLKA_CFGCR0 DDIA
Clock Select chooses the PLL for both DDIA and DDID and drives
port A in all cases."
Also, since the CNL DPCLKA_CFGCR0 bit defines are still port-based, we
create separate ICL-specific defines that accept the PHY rather than
trying to share the same bit definitions between CNL and ICL.
v5: Make icl_dpclka_cfgcr0_clk_off() take phy rather than port. When
splitting the original patch the hunk to handle this wound up too
late in the series. (Sparse)
v6: Since we're already changing this code,
s/DPCLKA_CFGCR0_ICL/ICL_DPCLKA_CFGCR0/ for consistency. (Jose)
Bspec: 33148
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709183934.445-3-matthew.d.roper@intel.com
Matt Roper [Tue, 9 Jul 2019 18:39:30 +0000 (11:39 -0700)]
drm/i915/gen11: Start distinguishing 'phy' from 'port'
Our past DDI-based Intel platforms have had a fixed DDI<->PHY mapping.
Because of this, both the bspec documentation and our i915 code has used
the term "port" when talking about either DDI's or PHY's; it was always
easy to tell what terms like "Port A" were referring to from the
context.
Unfortunately this is starting to break down now that EHL allows PHY-A
to be driven by either DDI-A or DDI-D. Is a setup with DDI-D driving
PHY-A considered "Port A" or "Port D?" The answer depends on which
register we're working with, and even the bspec doesn't do a great job
of clarifying this.
Let's try to be more explicit about whether we're talking about the DDI
or the PHY on gen11+ by using 'port' to refer to the DDI and creating a
new 'enum phy' namespace to refer to the PHY in use.
This patch just adds the new PHY namespace, new phy-based versions of
intel_port_is_*(), and a helper to convert a port to a PHY.
Transitioning various areas of the code over to using the PHY namespace
will be done in subsequent patches to make review easier. We'll remove
the intel_port_is_*() functions at the end of the series when we
transition all callers over to using the PHY-based versions.
v2:
- Convert a few more 'port' uses to 'phy.' (Sparse)
v3:
- Switch DDI_CLK_SEL() back to 'port.' (Jose)
- Add a code comment clarifying why DPCLKA_CFGCR0_ICL needs to use PHY
for its bit definitions, even though the register description is
given in terms of DDI.
- To avoid confusion, switch CNL's DPCLKA_CFGCR0 defines back to using
port and create separate ICL+ definitions that work in terms of PHY.
v4:
- Rebase and resolve conflicts with Imre's TC series.
- This patch now just adds the namespace and a few convenience
functions; the important changes are now split out into separate
patches to make review easier.
Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709183934.445-2-matthew.d.roper@intel.com
Lucas De Marchi [Mon, 8 Jul 2019 17:28:14 +0000 (10:28 -0700)]
drm/i915: move intel_ddi_set_fia_lane_count to intel_tc.c
PORT_TX_DFLEXDPMLE1 is a FIA register so move it to intel_tc.c where we
access other FIA registers. In Tiger Lake we have multiple/modular FIAs
so it makes sense to start moving all access to their registers to a
common place.
While at it, make it clear that we will only ever call this function
for ports with TC phy. Previously we were relying on tc_mode being
TC_PORT_TBT_ALT for combo phy ports. However it's confusing since in
this same function we have checks for is_tc_port. Also, if we manage to
make each phy access only their own field, we may in future add them as
a union inside intel_digital_port.
v2: Fix coding style while moving the code
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708172815.6814-4-lucas.demarchi@intel.com
Lucas De Marchi [Tue, 9 Jul 2019 15:54:03 +0000 (08:54 -0700)]
drm/i915: fix include order in intel_tc.*
Separate local includes with a blank line and sort the groups
alphabetically.
v2: don't make intel_tc.h be the first include
v3: don't make local includes be included first
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709155403.29370-1-lucas.demarchi@intel.com
Lucas De Marchi [Mon, 8 Jul 2019 17:28:12 +0000 (10:28 -0700)]
drm/i915: make new intel_tc.c use uncore accessors
Let's make the just created intel_tc.c already follow the trend of using
i915 instead of dev_priv and calling the intel_uncore_*() functions.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708172815.6814-2-lucas.demarchi@intel.com
Rodrigo Vivi [Wed, 10 Jul 2019 13:51:35 +0000 (06:51 -0700)]
Merge drm/drm-next into drm-intel-next-queued
Catch-up with 5.2. Specially to remove a drm-tip merge
fixup around intel_workarounds.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Uma Shankar [Fri, 28 Jun 2019 08:02:30 +0000 (13:32 +0530)]
drm/i915/icl: Fixed Input CSC Co-efficients for BT601/709
Input CSC Co-efficients for BT601 and BT709 YCbCR to RGB
conversion were slightly off. Fixed the same.
v2: Fixed the co-eficients as there was issue with reference
matrix, spotted by Ville.
v3: Rebase
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628080230.27492-4-uma.shankar@intel.com
Uma Shankar [Fri, 28 Jun 2019 08:02:29 +0000 (13:32 +0530)]
drm/i915/icl: Fix Y pre-offset for Full Range YCbCr
Fixed Y Pre-offset in case of Full Range YCbCr.
v2: Rebase
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628080230.27492-3-uma.shankar@intel.com
Uma Shankar [Fri, 28 Jun 2019 08:02:28 +0000 (13:32 +0530)]
drm/i915/icl: Handle YCbCr to RGB conversion for BT2020 case
Currently input csc for YCbCR to RGB conversion handles only
BT601 and Bt709. Extending it to support BT2020 as well.
v2: Fixed the co-efficients for LR to FR conversion,
as suggested by Ville.
v3: Fixed Y Pre-offset in case of Full Range YCbCr as suggested
by Ville.
v4: Split the v2 and v3 changes.
v5: Rebase
v6: Fix a rebase fumble.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628080230.27492-2-uma.shankar@intel.com
Lionel Landwerlin [Wed, 10 Jul 2019 10:55:24 +0000 (11:55 +0100)]
drm/i915/perf: add missing delay for OA muxes configuration
This was dropped from the original patch series, we weren't sure
whether it was needed at the time. More recent tests show it's
definitely needed to have acurate performance data.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes:
19f81df2859eb1 ("drm/i915/perf: Add OA unit support for Gen 8+")
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
[ickle: combine duplicate code and comments]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710105524.23017-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 10 Jul 2019 06:44:41 +0000 (07:44 +0100)]
drm/i915/execlists: Record preemption for selftests
Put back the preemption counters lost in commit
22b7a426bbe1
("drm/i915/execlists: Preempt-to-busy") so that our selftests that
assert no preemption took place continue to function.
v2: But a timeslice is only a "soft" preemption!
Fixes:
22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710064454.682-1-chris@chris-wilson.co.uk
Tvrtko Ursulin [Tue, 9 Jul 2019 09:31:05 +0000 (10:31 +0100)]
drm/i915: Remove unused i915_gem_context_lookup_engine
There are no known plans to start using it either.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709093105.24699-1-tvrtko.ursulin@linux.intel.com
Lionel Landwerlin [Tue, 9 Jul 2019 16:42:27 +0000 (17:42 +0100)]
drm/i915: add infrastructure to hold off preemption on a request
We want to set this flag in the next commit on requests containing
perf queries so that the result of the perf query can just be a delta
of global counters, rather than doing post processing of the OA
buffer.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[ickle: add basic selftest for nopreempt]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709164227.25859-1-chris@chris-wilson.co.uk
Lionel Landwerlin [Tue, 9 Jul 2019 12:33:43 +0000 (15:33 +0300)]
drm/i915: enumerate scratch fields
We have a bunch of offsets in the scratch buffer. As we're about to
add some more, let's group all of the offsets in a common location.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709123351.5645-6-lionel.g.landwerlin@intel.com
Lionel Landwerlin [Tue, 9 Jul 2019 12:33:39 +0000 (15:33 +0300)]
drm/i915/perf: ensure we keep a reference on the driver
The i915 perf stream has its own file descriptor and is tied to
reference of the driver. We haven't taken care of keep the driver
alive.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes:
eec688e1420da5 ("drm/i915: Add i915 perf infrastructure")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709123351.5645-2-lionel.g.landwerlin@intel.com
Chris Wilson [Tue, 9 Jul 2019 08:17:18 +0000 (09:17 +0100)]
drm/i915/userptr: Don't mark readonly objects as dirty
If we map an object as readonly into the GTT, we know that the GPU
cannot have written to it and so the object is not dirty and we don't
need to flush the writes back to the system.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709081718.27843-1-chris@chris-wilson.co.uk
Imre Deak [Mon, 8 Jul 2019 14:07:35 +0000 (17:07 +0300)]
drm/i915/icl: Clear the shared port PLLs from the new crtc state
For consistency clear the icl_port_dplls from the new crtc state, when
releasing the DPLLs from the old crtc state. Leaving them set could
result in releasing the same PLLs multiple times from the same CRTC
state incorrectly (if the same CRTC was first used for a TypeC port then
for a combo PHY port).
Leaving the stale pointers behind happens not to cause a problem atm
(since the incorrect releasing will be a NOP), but we need to fix that
for consistency.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708140735.20198-2-imre.deak@intel.com
Imre Deak [Mon, 8 Jul 2019 14:07:34 +0000 (17:07 +0300)]
drm/i915: Clear the shared PLL from the put_dplls() hook
For symmetry with the get_dplls() hook which sets the shared_dpll
pointer clear the same pointer from the put_dplls() hook.
While at it also constify the old crtc state.
v2:
- Constify the old crtc state. (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708140735.20198-1-imre.deak@intel.com
Ville Syrjälä [Wed, 19 Jun 2019 18:03:12 +0000 (21:03 +0300)]
drm/i915/sdvo: Add helpers to get the cmd/status string
Add sdvo_cmd_name() and sdvo_cmd_status() helpers to avoid bothering
the callers with the implementation details of the storage for these
strings.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619180312.31817-6-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Wed, 19 Jun 2019 18:03:10 +0000 (21:03 +0300)]
drm/i915/sdvo: Shrink sdvo_cmd_names[] strings
Drop the redundant "SDVO_CMD_" prefix from the command name
strings in sdvo_cmd_names[].
While at it throw away the unused struct name, and undef
SDVO_CMD_NAME_ENTRY() when we're done.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619180312.31817-4-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Wed, 19 Jun 2019 18:03:09 +0000 (21:03 +0300)]
drm/i915/sdvo: Remove duplicate SET_INPUT_TIMINGS_PART1 cmd name string
sdvo_cmd_names[] contains two entries for SET_INPUT_TIMINGS_PART1.
Remove one of them.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619180312.31817-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Wed, 19 Jun 2019 18:03:08 +0000 (21:03 +0300)]
drm/i915/sdvo: Use named initializers for the SDVO command names
Use named initializers to make it easier to associate the SDVO debug
prints with the SDVO command defines. Also switch to using ARRAY_SIZE()
instead of assuming that SDVO_CMD_STATUS_SCALING_NOT_SUPP is the last
command type.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619180312.31817-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Vandita Kulkarni [Thu, 27 Jun 2019 15:24:57 +0000 (20:54 +0530)]
drm/i915: Add icl mipi dsi properties
Add scaling and panel orientation properties for
icl mipi dsi.
v2: Add platform specific function (Ville)
v3: Remove redundant check and update scaler call (Jani, Ville)
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190627152457.26146-1-vandita.kulkarni@intel.com
Ramalingam C [Mon, 8 Jul 2019 11:33:19 +0000 (17:03 +0530)]
drm/i915/hdcp: debug logs for sink related failures
Adding few more debug logs to identify the sink specific HDCP failures
along with a out of mem failure.
v2:
Capturing the Bug and a-b
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110991
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708113319.2517-1-ramalingam.c@intel.com
Chris Wilson [Fri, 5 Jul 2019 12:43:25 +0000 (13:43 +0100)]
drm/i915/gt: Remove presumption of RCS0
We now track features correctly instead of probing i915->engine[RCS0]
which is much more flexible and avoids any nasty surprises.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705124325.14270-2-chris@chris-wilson.co.uk
Chris Wilson [Fri, 5 Jul 2019 12:43:24 +0000 (13:43 +0100)]
drm/i915/gt: Apply RCS workarounds to the render class
Treat all render engines to the RCS workarounds, simply to avoid using
engine->id when we are trying to think in terms of classes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705124325.14270-1-chris@chris-wilson.co.uk
Chris Wilson [Mon, 8 Jul 2019 11:30:38 +0000 (12:30 +0100)]
drm/i915/selftests: Fill in a little more of the dummy fence
Initialise the dma_fence innards in preparation for making
dma_fence_signal() always check the callback list.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708113038.19251-1-chris@chris-wilson.co.uk
Chris Wilson [Mon, 8 Jul 2019 14:03:27 +0000 (15:03 +0100)]
drm/i915/userptr: Acquire the page lock around set_page_dirty()
set_page_dirty says:
For pages with a mapping this should be done under the page lock
for the benefit of asynchronous memory errors who prefer a
consistent dirty state. This rule can be broken in some special
cases, but should be better not to.
Under those rules, it is only safe for us to use the plain set_page_dirty
calls for shmemfs/anonymous memory. Userptr may be used with real
mappings and so needs to use the locked version (set_page_dirty_lock).
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203317
Fixes:
5cc9ed4b9a7a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
References:
6dcc693bc57f ("ext4: warn when page is dirtied without buffers")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708140327.26825-1-chris@chris-wilson.co.uk
Chris Wilson [Mon, 8 Jul 2019 21:55:24 +0000 (22:55 +0100)]
drm/i915/selftests: Set igt_spinner.gt for early exit
Set up a default gt pointer for an early cleanup of igt_spinnter, before
a request is created and igt_spinner.gt set to the active engine's.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708215524.31639-1-chris@chris-wilson.co.uk
Rodrigo Vivi [Mon, 8 Jul 2019 20:09:06 +0000 (13:09 -0700)]
drm/i915: Update DRIVER_DATE to
20190708
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Chris Wilson [Mon, 8 Jul 2019 15:23:21 +0000 (16:23 +0100)]
drm/i915/selftests: Reorder error cleanup for whitelist checking
Reorder the error paths so that we unwind all the locals from any error
path and so avoid setting off divers alarum in case we find an error in
case we find an error.
References: https://bugs.freedesktop.org/show_bug.cgi?id=111048
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708152321.22187-1-chris@chris-wilson.co.uk
Chris Wilson [Mon, 8 Jul 2019 15:49:14 +0000 (16:49 +0100)]
drm/i915: Explicitly track active fw_domain timers
Stop guessing over whether we have an extra wakeref held by the delayed
fw put, and track it explicitly for the sake of debug.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708154914.26850-1-chris@chris-wilson.co.uk
Chris Wilson [Sun, 7 Jul 2019 15:11:35 +0000 (16:11 +0100)]
drm/i915: Pull assert_forcewake_active() underneath the lock
Make no assumption that something in the background is not acquiring the
fw_domain -- but we still do not track owner so assume that any active
domain is intended by the caller.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190707151135.11700-1-chris@chris-wilson.co.uk
Mika Kuoppala [Fri, 5 Jul 2019 21:52:04 +0000 (22:52 +0100)]
drm/i915/gtt: Introduce release_pd_entry
By encapsulating the locking upper level and used check for entry
into a helper function, we can use it in all callsites.
v2: get rid of atomic_reads on lower level clears (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705215204.4559-4-chris@chris-wilson.co.uk
Mika Kuoppala [Fri, 5 Jul 2019 21:52:03 +0000 (22:52 +0100)]
drm/i915/gtt: Setup phys pages for 3lvl pdps
If we setup backing phys page for 3lvl pdps, as they
are not used, we will lose 5 pages per ppgtt.
Trading this memory on bsw, we gain more common code paths for all
gen8+ directory manipulation. And those paths are now void of checks
for page directory type, making the hot paths faster.
v2: don't shortcut vm (Chris)
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705215204.4559-3-chris@chris-wilson.co.uk
Mika Kuoppala [Fri, 5 Jul 2019 21:52:02 +0000 (22:52 +0100)]
drm/i915/gtt: Tear down setup and cleanup macros for page dma
We don't use common codepaths to setup and cleanup page
directories vs page tables. So their setup and cleanup macros
are of no use and can be removed.
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705215204.4559-2-chris@chris-wilson.co.uk
Mika Kuoppala [Fri, 5 Jul 2019 21:52:01 +0000 (22:52 +0100)]
drm/i915/gtt: pde entry encoding is identical
For all page directory entries, the pde encoding is
identical. Don't complicate call sites with different
versions of doing the same thing, so we always check the
existence of physical page before writing the entry into
it. This further generalizes the pd so that manipulation in
callsites will be identical, removing the need to handle
pdps differently for gen8.
v2: squash
v3: inc/dec with set/clear (Chris)
v4: inlines, warn, stray set_pd (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705215204.4559-1-chris@chris-wilson.co.uk
YueHaibing [Fri, 5 Jul 2019 11:31:38 +0000 (11:31 +0000)]
drm/i915: Remove set but not used variable 'intel_dig_port'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/i915/display/intel_ddi.c: In function 'intel_ddi_get_config':
drivers/gpu/drm/i915/display/intel_ddi.c:3774:29: warning:
variable 'intel_dig_port' set but not used [-Wunused-but-set-variable]
struct intel_digital_port *intel_dig_port;
It is never used, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705113138.65880-1-yuehaibing@huawei.com
YueHaibing [Fri, 5 Jul 2019 11:31:12 +0000 (11:31 +0000)]
drm/i915: Remove set but not used variable 'encoder'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/i915/display/intel_dp.c: In function 'intel_dp_set_drrs_state':
drivers/gpu/drm/i915/display/intel_dp.c:6623:24: warning:
variable 'encoder' set but not used [-Wunused-but-set-variable]
It's never used, so can be removed.Also remove related
variable 'dig_port'
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705113112.64715-1-yuehaibing@huawei.com
Chris Wilson [Fri, 5 Jul 2019 07:45:57 +0000 (08:45 +0100)]
drm/i915: Order assert forcewake test
Read the current value before computing the expected to ensure that if
the timer does complete early (against our will), it should not cause a
false positive.
v2: The local irq disable did not prevent the timer from running.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111074
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705074604.16496-1-chris@chris-wilson.co.uk
Vivek Kasireddy [Wed, 3 Jul 2019 23:03:53 +0000 (16:03 -0700)]
drm/i915/ehl: Add support for DPLL4 (v10)
This patch adds support for DPLL4 on EHL that include the
following restrictions:
- DPLL4 cannot be used with DDIA (combo port A internal eDP usage).
DPLL4 can be used with other DDIs, including DDID
(combo port A external usage).
- DPLL4 cannot be enabled when DC5 or DC6 are enabled.
- The DPLL4 enable, lock, power enabled, and power state are connected
to the MGPLL1_ENABLE register.
v2: (suggestions from Bob Paauwe)
- Rework ehl_get_dpll() function to call intel_find_shared_dpll() and
iterate twice: once for Combo plls and once for MG plls.
- Use MG pll funcs for DPLL4 instead of creating new ones and modify
mg_pll_enable to include the restrictions for EHL.
v3: Fix compilation error
v4: (suggestions from Lucas and Ville)
- Treat DPLL4 as a combo phy PLL and not as MG PLL
- Disable DC states when this DPLL is being enabled
- Reuse icl_get_dpll instead of creating a separate one for EHL
v5: (suggestion from Ville)
- Refcount the DC OFF power domains during the enabling and disabling
of this DPLL.
v6: rebase
v7: (suggestion from Imre)
- Add a new power domain instead of iterating over the domains
assoicated with DC OFF power well.
v8: (Ville and Imre)
- Rename POWER_DOMAIN_DPLL4 TO POWER_DOMAIN_DPLL_DC_OFF
- Grab a reference in intel_modeset_setup_hw_state() if this
DPLL was already enabled perhaps by BIOS.
- Check for the port type instead of the encoder
v9: (Ville)
- Move the block of code that grabs a reference to the power domain
POWER_DOMAIN_DPLL_DC_OFF to intel_modeset_readout_hw_state() to ensure
that there is a reference present before this DPLL might get disabled.
v10: rebase
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703230353.24059-1-vivek.kasireddy@intel.com
Ville Syrjälä [Wed, 3 Jul 2019 20:08:24 +0000 (23:08 +0300)]
drm/i915: Clean up skl vs. icl plane formats
Split the format lists for different planes on skl/icl more cleanly.
On skl+ we have just two types of planes: those can do planar and
those that can't.
On icl we have three types of planes: hdr planes, sdr planes that
can do planar, and sdr planes that can't do planar. Those latter two
are the same set of planes we must when choose from when picking the
UV vs. Y plane for planar scanout. So we shall just designate
them sdr uv planes and sdr y planes.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703200824.5971-7-ville.syrjala@linux.intel.com
Ville Syrjälä [Wed, 3 Jul 2019 20:08:23 +0000 (23:08 +0300)]
drm/i915: Cosmetic fix for skl+ plane switch statement
One of the switch cases has the byte order vs. format bits
reversed to all the other cases. Appease the ocd and reorder
them.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703200824.5971-6-ville.syrjala@linux.intel.com
Ville Syrjälä [Wed, 3 Jul 2019 20:08:22 +0000 (23:08 +0300)]
drm/i915: Deal with cpp==8 for g4x watermarks
Docs tell us that on g4x we have to compute the SR watermarks
using 4 bytes per pixel. I'm going to assume that only applies
to 1 and 2 byte per pixel formats, and not 8 byte per pixel
formats. That seems like a recipe for an insufficient watermark
which could lead to underruns. Use the maximum of the two numbers
instead.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703200824.5971-5-ville.syrjala@linux.intel.com
Ville Syrjälä [Wed, 3 Jul 2019 20:08:21 +0000 (23:08 +0300)]
drm/i915: Program plane gamma ramps
All sprite planes have a progammable gamma ramp. Set it up with
a linear ramp on all platforms. This actually matches the reset
value but soon we'll want to reprogram this ramp on some machines,
so let's just set it up across the board.
Note that on pre-IVB the hardware bypasses the gamma unit
unless a YCbCr pixel format is used.
v2: Add parens around << in ilk_linear_gamma()
Skip gamma programming for RGB on pre-IVB
s/DVSGAMC/DVSGAMC_G4X/
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703200824.5971-4-ville.syrjala@linux.intel.com
Ville Syrjälä [Wed, 3 Jul 2019 20:08:20 +0000 (23:08 +0300)]
drm/i915: Disable sprite gamma on ivb-bdw
We don't currently have any use for the sprite gamma on ivb-bdw.
Let's disable it. We already do that on skl+.
On pre-ivb there is no way to disable the sprite gamma, and it
only affects YCbCr pixel formats, whereas on ivb+ it also
affects RGB formats.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703200824.5971-3-ville.syrjala@linux.intel.com
Ville Syrjälä [Wed, 3 Jul 2019 20:08:19 +0000 (23:08 +0300)]
drm/i915: Add windowing for primary planes on gen2/3 and chv
Plane B and C (note that we don't actually expose plane C currently)
on gen2/3 have a window generator, as does the primary plane on CHV
pipe B. So let's allow positioning of these planes freely within the
pipe source area.
Plane A on gen2/3 seems to have some kind of partial window generator
which would allow you to cut the plane off midway through the scanout,
but it would still have to start at the top-left corner of the pipe,
and it would have to be full width. That's doesn't sound all that
useful, so for simplicity let's just keep to the idea that plane A
has to be fullscreen.
Gen4 removed the plane A/B windowing support entirely, and it wasn't
reintroduced until SKL (apart from the CHV pipe B special case).
v2: s/plane/i9xx_plane/ etc. (James)
v3: Make it less confusing
v4: Deal with IS_GEN()
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703200824.5971-2-ville.syrjala@linux.intel.com
Tvrtko Ursulin [Thu, 4 Jul 2019 12:17:56 +0000 (13:17 +0100)]
drm/i915: Move dev_priv->pm_i{m, e}r into intel_gt
PM interrupts belong to the GT so move the variables to be inside
struct intel_gt.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Co-developed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190704121756.27824-3-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Thu, 4 Jul 2019 12:17:55 +0000 (13:17 +0100)]
drm/i915: Remove some legacy mmio accessors from interrupt handling
Mostly in gen11 interrupt handling and a couple neighbouring functions
which were easy since uncore local was already available.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Co-developed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190704121756.27824-2-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Thu, 4 Jul 2019 12:17:54 +0000 (13:17 +0100)]
drm/i915: Rework some interrupt handling functions to take intel_gt
Some interrupt handling functions already have gt in their names
suggesting them as obvious candidates to make them take struct intel_gt
instead of i915.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Co-developed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190704121756.27824-1-tvrtko.ursulin@linux.intel.com
Chris Wilson [Thu, 4 Jul 2019 20:04:55 +0000 (21:04 +0100)]
drm/i915: Show instdone for each engine in debugfs
Although polling each engine quickly is preferable as it should give us
a sample of each engine at roughly the same time, keep it simple and
just sample the engine as print out the debug state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190704200455.14870-3-chris@chris-wilson.co.uk
Chris Wilson [Thu, 4 Jul 2019 21:23:43 +0000 (22:23 +0100)]
drm/i915/selftests: Be engine agnostic
When using MI operations, we do not care which engine we use, so use
them all where possible, and where inconvenient double check we have the
engine we selected at random.
v2: Drop the local copy of engine->sseu to avoid an unchecked deref
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190704212343.6820-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 4 Jul 2019 20:04:53 +0000 (21:04 +0100)]
drm/i915/overlay: Stash the kernel context on initialisation
Simplify runtime request creation by storing the context we need to use
during initialisation. This allows us to remove one more hardcoded
engine lookup.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190704200455.14870-1-chris@chris-wilson.co.uk
Tvrtko Ursulin [Wed, 3 Jul 2019 14:41:16 +0000 (15:41 +0100)]
drm/i915/hangcheck: Look at instdone for all engines
It seems intel_engine_get_instdone is able to get instdone for all engines
but intel_hangcheck.c/subunits_stuck decides to ignore it for non render.
We can just drop the check in subunits_stuck since the checks on
unavailable fields will always return stuck, which when bitwise and with
the potential unstuck instdone is harmless.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703144116.15593-1-tvrtko.ursulin@linux.intel.com
Chris Wilson [Thu, 4 Jul 2019 16:53:17 +0000 (17:53 +0100)]
drm/i915/selftests: Drain the freedlists between exec passes
During the context execution tests, we issue a lot of work and discard a
lot of objects without releasing the lock and allowing the background
reaper to free those objects. Insert a small break between each pass to
flush the worker.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190704165317.21060-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 4 Jul 2019 20:16:56 +0000 (21:16 +0100)]
drm/i915/gtt: Mark the freed page table entries with scratch
On unwinding the allocation error path and having freed the page table
entry, it is imperative that we mark it as scratch.
<4> [416.075569] general protection fault: 0000 [#1] PREEMPT SMP PTI
<4> [416.075801] CPU: 0 PID: 2385 Comm: kworker/u2:11 Tainted: G U 5.2.0-rc7-CI-Patchwork_13534+ #1
<4> [416.076162] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014
<4> [416.076522] Workqueue: i915 __i915_vm_release [i915]
<4> [416.076754] RIP: 0010:gen8_ppgtt_cleanup_3lvl+0x58/0xb0 [i915]
<4> [416.077023] Code: 81 e2 04 fe ff ff 81 c2 ff 01 00 00 4c 8d 74 d6 58 4d 8b 65 00 4d 3b a7 28 02 00 00 74 40 49 8d 5c 24 50 49 81 c4 50 10 00 00 <48> 8b 2b 49 3b af 20 02 00 00 74 13 4c 89 ff 48 89 ee e8 01 fb ff
<4> [416.077445] RSP: 0018:
ffffc9000046bd98 EFLAGS:
00010206
<4> [416.077625] RAX:
0001000000000000 RBX:
6b6b6b6b6b6b6bbb RCX:
8b4b56d500000000
<4> [416.077838] RDX:
00000000000001ff RSI:
ffff88805a578008 RDI:
ffff88805bd0efc8
<4> [416.078167] RBP:
ffff88805bd0efc8 R08:
0000000004e42b93 R09:
0000000000000001
<4> [416.078381] R10:
0000000000000000 R11:
ffff888077a1b0b8 R12:
6b6b6b6b6b6b7bbb
<4> [416.078594] R13:
ffff88805a578058 R14:
ffff88805a579058 R15:
ffff88805bd0efc8
<4> [416.078815] FS:
0000000000000000(0000) GS:
ffff88807da00000(0000) knlGS:
0000000000000000
<4> [416.079395] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
<4> [416.079851] CR2:
000056160fec2b14 CR3:
0000000071bbc003 CR4:
00000000003606f0
<4> [416.080388] Call Trace:
<4> [416.080828] gen8_ppgtt_cleanup+0x64/0x100 [i915]
<4> [416.081399] __i915_vm_release+0xfc/0x1d0 [i915]
Fixes:
1d1b5490b91c ("drm/i915/gtt: Replace struct_mutex serialisation for allocation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190704201656.15775-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 3 Jul 2019 13:58:05 +0000 (14:58 +0100)]
drm/i915/gt: Pull engine w/a initialisation into common
We need to setup the workarounds on all engines, with the knowledge
about which platforms each workaround applies to kept together in the
workaround list. As such, we can pull the w/a initialisation into the
common setup and try to avoid duplicating knowledge about when to setup
the workarounds.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703135805.7310-2-chris@chris-wilson.co.uk
Chris Wilson [Wed, 3 Jul 2019 13:58:04 +0000 (14:58 +0100)]
drm/i915: Dump w/a lists on all engines
We store separate wa_list on every engine, so be sure to include all
when dumping the current set via debugfs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703135805.7310-1-chris@chris-wilson.co.uk
Michal Wajdeczko [Wed, 3 Jul 2019 11:36:39 +0000 (11:36 +0000)]
drm/i915/guc: Upgrade to GuC 33.0.0
New GuC firmware is available. Let's use it.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703113640.31100-1-michal.wajdeczko@intel.com
Chris Wilson [Thu, 4 Jul 2019 10:43:45 +0000 (11:43 +0100)]
drm/i915/gtt: Handle double alloc failures
Matthew pointed out that we could face a double failure with concurrent
allocations/frees, and so the assumption that the local var alloc was
NULL was fraught with danger. Rather than complicate the error paths too
much to add a second local for a second free, just do the second free
earlier on the unwind path.
Reported-by: Matthew Auld <matthew.william.auld@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190704104345.6603-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 3 Jul 2019 14:37:02 +0000 (15:37 +0100)]
drm/i915: Show support for accurate sw PMU busyness tracking
Expose whether or not we support the PMU software tracking in our
scheduler capabilities, so userspace can query at runtime.
v2: Use I915_SCHEDULER_CAP_ENGINE_BUSY_STATS for a less ambiguous
capability name.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703143702.11339-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 3 Jul 2019 18:06:01 +0000 (19:06 +0100)]
drm/i915/gem: Defer obj->base.resv fini until RCU callback
Since reservation_object_fini() does an immediate free, rather than
kfree_rcu as normal, we have to delay the release until after the RCU
grace period has elapsed (i.e. from the rcu cleanup callback) so that we
can rely on the RCU protected access to the fences while the object is a
zombie.
i915_gem_busy_ioctl relies on having an RCU barrier to protect the
reservation in order to avoid having to take a reference and strong
memory barriers.
v2: Order is important; only release after putting the pages!
Fixes:
c03467ba40f7 ("drm/i915/gem: Free pages before rcu-freeing the object")
Testcase: igt/gem_busy/close-race
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703180601.10950-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 3 Jul 2019 15:52:25 +0000 (16:52 +0100)]
drm/i915/gt: Ignore forcewake acquisition for posting_reads
We don't care about the result of the read, so it may be garbage, we
only care that the mmio is flushed. As such, we can forgo using an
individual forcewake and lock around any posting-read for an engine.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703155225.9501-4-chris@chris-wilson.co.uk
Chris Wilson [Wed, 3 Jul 2019 15:52:24 +0000 (16:52 +0100)]
drm/i915/gt: Assume we hold forcewake for execlists resume
We can assume the caller is holding a blanket forcewake for the
register writes during resume, and so we can skip taking individual
locks around each write inside execlists resume.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703155225.9501-3-chris@chris-wilson.co.uk
Chris Wilson [Wed, 3 Jul 2019 15:52:23 +0000 (16:52 +0100)]
drm/i915/gt: Use caller provided forcewake for intel_mocs_init_engine
During post-reset resume, we call intel_mocs_init_engine to reinitialise
the MOCS registers. Suprisingly, especially when enhanced by lockdep,
the acquisition of the forcewake lock around each register write takes a
substantial portion of the reset time. We don't need to use the
individual forcewake here as we can assume that the caller is holding a
blanket forcewake for the reset&resume and the resume is serialised.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703155225.9501-2-chris@chris-wilson.co.uk
Chris Wilson [Thu, 4 Jul 2019 10:20:48 +0000 (11:20 +0100)]
drm/i915: Check caller held wakerefs in assert_forcewakes_active
The intent of the assert is to document that the caller took the
appropriate wakerefs for the function. However, as Tvrtko pointed out,
we simply check whether the fw_domains are active and may be confused by
the auto wakeref which may be dropped between the check and use. Let's
be more careful in the assert and check that each fw_domain has an
explicit caller wakeref above and beyond the automatic wakeref.
v2: Fix spelling for config DRM_I915_DEBUG_RUNTIME_PM
v3: Timer may still be active after we drop the autowakeref, we need to
check domain->active instead.
v4: The timer checks domain->active, but we still need to check the
timer. (This is starting to look weird...)
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190704102048.6436-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 3 Jul 2019 17:19:13 +0000 (18:19 +0100)]
drm/i915: Flush the workqueue before draining
Trying to drain a workqueue while we may still be adding to it from
background tasks is, according to kernel/workqueue.c, verboten. So, add
a flush_workqueue() at the start of our cleanup procedure.
References: https://bugs.freedesktop.org/show_bug.cgi?id=110550
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703171913.16585-4-chris@chris-wilson.co.uk
Chris Wilson [Thu, 4 Jul 2019 09:19:25 +0000 (10:19 +0100)]
drm/i915: Move the renderstate setup under gt/
The render state is used to initialise the default RCS context, and only
used during early setup from within the gt code. As such, it makes a
good candidate for placing within gt/, even if it is not yet entirely
clean of our GEM heritage.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190704091925.7391-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 3 Jul 2019 17:19:12 +0000 (18:19 +0100)]
drm/i915/gtt: Defer the free for alloc error paths
If we hit an error while allocating the page tables, we have to unwind
the incomplete updates, and wish to free the unused pd. However, we are
not allowed to be hoding the spinlock at that point, and so must use the
later free to defer it until after we drop the lock.
<3> [414.363795] BUG: sleeping function called from invalid context at drivers/gpu/drm/i915/i915_gem_gtt.c:472
<3> [414.364167] in_atomic(): 1, irqs_disabled(): 0, pid: 3905, name: i915_selftest
<4> [414.364406] 3 locks held by i915_selftest/3905:
<4> [414.364408] #0:
0000000034fe8aa8 (&dev->mutex){....}, at: device_driver_attach+0x18/0x50
<4> [414.364415] #1:
000000006bd8a560 (&dev->struct_mutex){+.+.}, at: igt_ctx_exec+0xb7/0x410 [i915]
<4> [414.364476] #2:
000000003dfdc766 (&(&pd->lock)->rlock){+.+.}, at: gen8_ppgtt_alloc_pdp+0x448/0x540 [i915]
<3> [414.364529] Preemption disabled at:
<4> [414.364530] [<
0000000000000000>] 0x0
<4> [414.364696] CPU: 0 PID: 3905 Comm: i915_selftest Tainted: G U 5.2.0-rc7-CI-CI_DRM_6403+ #1
<4> [414.364698] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014
<4> [414.364699] Call Trace:
<4> [414.364704] dump_stack+0x67/0x9b
<4> [414.364708] ___might_sleep+0x167/0x250
<4> [414.364777] vm_free_page+0x24/0xc0 [i915]
<4> [414.364852] free_pd+0xf/0x20 [i915]
<4> [414.364897] gen8_ppgtt_alloc_pdp+0x489/0x540 [i915]
<4> [414.364946] gen8_ppgtt_alloc_4lvl+0x8e/0x2e0 [i915]
<4> [414.364992] ppgtt_bind_vma+0x2e/0x60 [i915]
<4> [414.365039] i915_vma_bind+0xe8/0x2c0 [i915]
<4> [414.365088] __i915_vma_do_pin+0xa1/0xd20 [i915]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111050
Fixes:
1d1b5490b91c ("drm/i915/gtt: Replace struct_mutex serialisation for allocation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703171913.16585-3-chris@chris-wilson.co.uk
Dave Airlie [Thu, 4 Jul 2019 04:52:50 +0000 (14:52 +1000)]
Merge tag 'drm-next-5.3-2019-06-27' of git://people.freedesktop.org/~agd5f/linux into drm-next
drm-next-5.3-2019-06-27:
amdgpu:
- Fix warning on 32 bit ARM
- Fix compilation on big endian
- Misc bug fixes
ttm:
- Live lock fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628015555.3384-1-alexander.deucher@amd.com
Dave Airlie [Thu, 4 Jul 2019 04:19:40 +0000 (14:19 +1000)]
Merge tag 'drm-misc-next-fixes-2019-06-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next-fixes for v5.3:
- Fixes to the tfp410 bridge.
- Small build fix for vga_switcheroo to prevent building against modular fbcon.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20a62234-bc27-00eb-e0e2-22b55eec1cb2@linux.intel.com
Dave Airlie [Thu, 4 Jul 2019 04:08:07 +0000 (14:08 +1000)]
Merge tag 'for-airlie-armada' of git://git.armlinux.org.uk/~rmk/linux-arm into drm-next
Armada DRM updates:
- Fix interlace support.
- use __drm_atomic_helper_plane_reset in overlay reset.
- since the overlay and video planes use essentially the same format
registers, precompute their values while validating.
- fix a long-standing deficiency with overlay planes and interlace modes
- calculate plane starting address at atomic_check stage rather than
when we're programming the registers.
- add gamma support.
- ensure mode adjustments made by other components are properly handled
in the driver and applied to the CRTC-programmed mode.
- add and use register definitions for the "REG4F" register.
- use drm_atomic_helper_shutdown() when tearing down to ensure that the
hardware is properly shutdown.
- add CRTC-level mode validation to ensure that we don't allow a mode
that the CRTC-level hardware can not support.
- improve the clocking selection for Armada 510 support.
- move CRTC debugfs files into the crtc-specific directory, using the
DRM helper to create these files.
- patch from Lubomir Rintel to replace a simple framebuffer.
- use the OF graph walker rather than open-coding this.
- eliminate a useless check for the availability of the remote's parent
which isn't required.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Russell King <rmk@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702091313.GA23442@rmk-PC.armlinux.org.uk
Dave Airlie [Thu, 4 Jul 2019 01:46:02 +0000 (11:46 +1000)]
Merge tag 'exynos-drm-next-for-v5.3' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next
- Drop the use of drmP.h header file
drmP.h header file has been deprecated so this patch drops the use of
this header, and instead includes appropriate header files required.
- Add COMPILE_TEST flag
This patch adds COMPILE_TEST dependency to exynos drm driver to
increase build test coverage. And also, it includes vmalloc.h
header file to fix one build warning which is introduced when
building the Linux kernel using sh.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAAQKjZMdBdD8oEa0cNv78FjrpOqu20ozTTvuPEm_XnVo2gRhCQ@mail.gmail.com
Aditya Swarup [Thu, 27 Jun 2019 22:07:08 +0000 (15:07 -0700)]
drm/i915: Add N & CTS values for 10/12 bit deep color
Adding N & CTS values for 10/12 bit deep color from Appendix C
table in HDMI 2.0 spec. The correct values for N is not chosen
automatically by hardware for deep color modes.
v2: Remove unnecessary initialization of size
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Cc: Clint Taylor <Clinton.A.Taylor@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190627220708.31700-2-aditya.swarup@intel.com
Aditya Swarup [Thu, 27 Jun 2019 22:07:07 +0000 (15:07 -0700)]
drm/i915: Use port clock to set correct N value
Use port_clock to check the clock values in n/cts lookup table instead
of crtc_clock. As port_clock is already adjusted based on color mode set
(8 bit or deep color), this will help in checking clock values for deep
color modes from n/cts lookup table.
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Cc: Clint Taylor <Clinton.A.Taylor@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190627220708.31700-1-aditya.swarup@intel.com
Ville Syrjälä [Thu, 6 Jun 2019 12:42:10 +0000 (15:42 +0300)]
drm/i915: Deal with machines that expose less than three QGV points
When SAGV is forced to disabled/min/med/max in the BIOS pcode will
only hand us a single QGV point instead of the normal three. Fix
the code to deal with that instead declaring the bandwidth limit
to be 0 MB/s (and thus preventing any planes from being enabled).
Also shrink the max_bw sturct a bit while at it, and change the
deratedbw type to unsigned since the code returns the bw as
an unsigned int.
Since we now keep track of how many qgv points we got from pcode
we can drop the earlier check added for the "pcode doesn't
support the memory subsystem query" case.
Cc: felix.j.degrood@intel.com
Cc: Mark Janes <mark.a.janes@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Clint Taylor <Clinton.A.Taylor@intel.com>
Fixes:
c457d9cf256e ("drm/i915: Make sure we have enough memory bandwidth on ICL")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110838
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606124210.3482-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Chris Wilson [Wed, 3 Jul 2019 09:17:19 +0000 (10:17 +0100)]
drm/i915: Mark up vma->active as safe for use inside shrinkers
Since a shrinker may be forced to wait on GPU activity,
i915_active_wait(&vma->active) must be safe for use inside a shrinker,
and so let's mark up the lock as being acquired by the shrinker to avoid
any nasty surprises creeping in.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703091726.11690-8-chris@chris-wilson.co.uk
Chris Wilson [Wed, 3 Jul 2019 09:17:18 +0000 (10:17 +0100)]
drm/i915: Markup potential lock for i915_active
Make the lockchains more deterministic via i915_active by flagging the
potential lock.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703091726.11690-7-chris@chris-wilson.co.uk
Chris Wilson [Wed, 3 Jul 2019 09:17:17 +0000 (10:17 +0100)]
drm/i915/gem: Free pages before rcu-freeing the object
As we have dropped the final reference to the object, we do not need to
wait until after the rcu grace period to drop its pages. We still require
struct_mutex to completely unbind the object to release the pages, so we
still need a free-worker to manage that from process context. By
scheduling the release of pages before waiting for the rcu should mean
that we are not trapping those pages from beyond the reach of the
shrinker.
v2: Pass along the request to skip if the vma is busy to the underlying
unbind routine, to avoid checking the reservation underneath the
i915->mm.obj_lock which may be used from inside irq context.
v3: Flip the bit for unbinding while active, for later convenience.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111035
Fixes:
a93615f900bd ("drm/i915: Throw away the active object retirement complexity")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703091726.11690-6-chris@chris-wilson.co.uk
Chris Wilson [Wed, 3 Jul 2019 09:17:20 +0000 (10:17 +0100)]
drm/i915/execlists: Hesitate before slicing
Be a little more hesitant before injecting a timeslice, and try to take
into account any change in priority that is due for the running task
before switching to another task. This will allow us to arbitrarily
prevent switching away from a request if we deem it necessarily to
disable preemption, for instance.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703091726.11690-9-chris@chris-wilson.co.uk
Chris Wilson [Wed, 3 Jul 2019 09:17:13 +0000 (10:17 +0100)]
drm/i915/selftests: Lock the drm_mm while modifying
Remember to lock the drm_mm as we modify it, lest it be modified in the
background by retire/free workers!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703091726.11690-2-chris@chris-wilson.co.uk
Chris Wilson [Wed, 3 Jul 2019 09:17:12 +0000 (10:17 +0100)]
drm/i915/selftests: Common live setup/teardown
We frequently, but not frequently enough!, remember to flush residual
operations and objects at the end of a live subtest. The purpose is to
cleanup after every subtest, leaving a clean slate for the next subtest,
and perform early detection of leaky state. As this should ideally be
common for all live subtests, pull the task into a common teardown
routine.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703091726.11690-1-chris@chris-wilson.co.uk