OSDN Git Service
Gargi Sharma [Fri, 17 Feb 2017 06:20:26 +0000 (11:50 +0530)]
staging: rtl8188eu: Fix block comments warning
Align * on each line and move final */ to a new line, to
conform to the kernel coding style for block comments.
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gargi Sharma [Fri, 17 Feb 2017 06:20:25 +0000 (11:50 +0530)]
staging: rtl8188eu: Replace x==NULL by !x
Replace x==NULL by !x, to fix the checkpatch issue
comparsion with NULL could be written as !x.
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
simran singhal [Thu, 16 Feb 2017 21:22:05 +0000 (02:52 +0530)]
staging: rtl8192u: Fixed 'tabstop' coding style warning
Replace a mix of tabs and spaces indentation by tabs only.
Fixed checkpatch warning "Statements should start on a tabstop" in
rtl8192u module.
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
simran singhal [Thu, 16 Feb 2017 20:36:56 +0000 (02:06 +0530)]
staging: rtl8192u: Replace symbolic permissions with octal permissions
Octal permissions should be used instead of symbolic ones for easier
reading.
WARNING: Symbolic permissions 'S_IRUGO | S_IWUSR' are not preferred.
Consider using octal permissions '0644'.
This warning is detected by checkpatch.pl
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Tue, 14 Feb 2017 22:25:32 +0000 (01:25 +0300)]
staging:r8188eu: remove unused MCS_rate_2R array
MCS_rate_2R[] does not used. Remove it.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Tue, 14 Feb 2017 22:25:31 +0000 (01:25 +0300)]
staging:r8188eu: remove unused HW_VAR_RF_TYPE parameter of HT_caps_handler
rtw_hal_get_hwreg() does not used with HW_VAR_RF_TYPE parameter.
Remove HW_VAR_RF_TYPE switch case in rtw_hal_get_hwreg and definition.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Tue, 14 Feb 2017 22:25:30 +0000 (01:25 +0300)]
staging:r8188eu: refactor HT_caps_handler() - remove rtw_hal_get_hwreg() call
rtw_hal_get_hwreg(..., HW_VAR_RF_TYPE,...) always return RF_1T1R value.
Replace the function call with RF_1T1R value and refactor HT_caps_handler().
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Tue, 14 Feb 2017 22:25:29 +0000 (01:25 +0300)]
staging:r8188eu: refactor rtw_update_ht_cap() - remove rtw_hal_get_hwreg() call
rtw_hal_get_hwreg(..., HW_VAR_RF_TYPE,...) always return RF_1T1R value.
Replace the function call with RF_1T1R value and refactor rtw_update_ht_cap().
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Tue, 14 Feb 2017 22:25:28 +0000 (01:25 +0300)]
staging:r8188eu: refactor issue_assocreq() - remove rtw_hal_get_hwreg() call
rtw_hal_get_hwreg(..., HW_VAR_RF_TYPE,...) always return RF_1T1R value.
Replace the function call with RF_1T1R value and refactor issue_assocreq().
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Tue, 14 Feb 2017 22:25:27 +0000 (01:25 +0300)]
staging:r8188eu: refactor rtw_get_cur_max_rate() - remove rtw_hal_get_hwreg() call
rtw_hal_get_hwreg(..., HW_VAR_RF_TYPE,...) always return RF_1T1R value.
Replace the function call with RF_1T1R value
and refactor rtw_get_cur_max_rate().
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Tue, 14 Feb 2017 22:25:26 +0000 (01:25 +0300)]
staging:r8188eu: refactor rtw_check_beacon_data() - remove rtw_hal_get_hwreg() call
rtw_hal_get_hwreg(..., HW_VAR_RF_TYPE,...) always return RF_1T1R value.
Replace the function call with RF_1T1R value
and refactor rtw_check_beacon_data().
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Tue, 14 Feb 2017 22:25:25 +0000 (01:25 +0300)]
staging:r8188eu: refactor add_RATid() - remove rtw_hal_get_hwreg() call
rtw_hal_get_hwreg(..., HW_VAR_RF_TYPE,...) always return RF_1T1R value.
Replace the function call with RF_1T1R value and refactor add_RATid().
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Tue, 14 Feb 2017 22:25:24 +0000 (01:25 +0300)]
staging:r8188eu: use DIV_ROUND_UP() in rtw_signal_stat_timer_hdl()
DIV_ROUND_UP macro is shorter and look better than if-else construction.
DIV_ROUND_UP used in rtw_signal_stat_timer_hdl().
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Katie Dunne [Mon, 20 Feb 2017 02:30:00 +0000 (18:30 -0800)]
staging: ks7010: remove unecessary spaces after casts
Remove spaces after casts found by checkpatch.pl. In some cases,
remove returns after casts and place them on a single line.
Signed-off-by: Katie Dunne <kdunne@mail.ccsf.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shiva Kerdel [Fri, 17 Feb 2017 21:41:54 +0000 (22:41 +0100)]
Staging: ks7010: ks_*: Braces should be used on all arms of these statements
Braces should be used on all arms of these statements (CHECK)..
Signed-off-by: Shiva Kerdel <shiva@exdev.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shiva Kerdel [Thu, 16 Feb 2017 23:18:35 +0000 (00:18 +0100)]
Staging: ks7010: ks_*: Use the BIT macro for bitwise checks
Changed bit swifting operators to BIT macros (preferred),
This change will also solve the preferred space surrounding
the operator checks.
Signed-off-by: Shiva Kerdel <shiva@exdev.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kenneth Hsu [Thu, 23 Feb 2017 02:58:14 +0000 (18:58 -0800)]
staging: olpc_dcon: add whitespace around binary operators
This fixes a coding style issue where whitespace characters were missing
around some binary OR operators.
Signed-off-by: Kenneth Hsu <kennethhsu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
simran singhal [Wed, 22 Feb 2017 09:32:04 +0000 (15:02 +0530)]
staging: lustre: Using macro DIV_ROUND_UP
The macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) /(d)).
It clarifies the divisor calculations. This occurence was detected using
the coccinelle script:
@@
expression e1;
expression e2;
@@
(
- ((e1) + e2 - 1) / (e2)
+ DIV_ROUND_UP(e1,e2)
|
- ((e1) + (e2 - 1)) / (e2)
+ DIV_ROUND_UP(e1,e2)
)
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Sat, 18 Feb 2017 21:47:15 +0000 (16:47 -0500)]
staging: lustre: lprocfs: move lprocfs_stats_[un]lock to a source file
When compiling the kernel without optimization, when using GCOV,
the lprocfs_stats_alloc_one() symbol is not properly exported to
other modules and causes the ptlrpc module to fail loading with
an unknown symbol. There is no reason to export the function
lprocfs_stats_alloc_one. The reason is due to the functions
lprocfs_stats_[un]lock being inline functions in a header file.
Lets untangle this mess and turn those inline functions
into real functions in a source file.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8836
Reviewed-on: https://review.whamcloud.com/23773
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Niu Yawei [Sat, 18 Feb 2017 21:47:12 +0000 (16:47 -0500)]
staging: lustre: ldlm: fix race of starting bl threads
There is race in the code of starting bl threads which leads to
thread number exceeds the maximum number when race happened, it
can also lead to duplicated thread name. This patch fixes the
race and cleanup the code a bit.
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7330
Reviewed-on: http://review.whamcloud.com/17026
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vitaly Fertman [Sat, 18 Feb 2017 21:47:11 +0000 (16:47 -0500)]
staging: lustre: ldlm: disconnect speedup
disconnect takes too long time if there are many locks to cancel.
besides the amount of time spent on each lock cancel, there is a
resched() in cfs_hash_for_each_relax(), i.e. disconnect or eviction
may take unexpectedly long time. While this patch only contains
the client side fixes the original fix covered changes to both
the server and client code to ensure proper disconnect handling.
Below details the change done on both the server and client so
people can examine the disconnect behavior with both source bases.
- do not cancel locks on disconnect_export;
- export will be left in obd_unlinked_exports list pinned by live
locks;
- new re-connects will created other non-conflicting exports;
- new locks will cancel obsolete locks on conflicts;
- once all the locks on the disconnected export will be cancelled,
the export will be destroyed on the last ref put;
- do not cancel in small portions, cancel all together in just 1
dedicated thread - use server side blocking thread for that;
- cancel blocked locks first so that waiting locks could proceed;
- take care about blocked waiting locks, so that they would get
cancelled quickly too;
- do not remove lock from waiting list on AST error before moving
it to elt_expired_locks list, because it removes it from export
list too; otherwise this blocked lock will not be cancelled
immediately on failed export;
- cancel lock instead of just destroy for failed export, to make
full cleanup, i.e. remove it from export list.
Signed-off-by: Vitaly Fertman <vitaly_fertman@xyratex.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3031
Xyratex-bug-id: MRP-395 MRP-1366 MRP-1366
Reviewed-by: Andriy Skulysh <Andriy_Skulysh@xyratex.com>
Reviewed-by: Alexey Lyashkov <Alexey_Lyashkov@xyratex.com>
Reviewed-on: http://review.whamcloud.com/5843
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vitaly Fertman [Sat, 18 Feb 2017 21:47:10 +0000 (16:47 -0500)]
staging: lustre: ldlm: reduce ldlm pool recalc window
Reduce the sleep period from 50 seconds down to
LDLM_POOL_CLI_DEF_RECALC_PERIOD which is 10 seconds.
Signed-off-by: Vitaly Fertman <vitaly_fertman@xyratex.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3031
Xyratex-bug-id: MRP-395 MRP-1366 MRP-1366
Reviewed-by: Andriy Skulysh <Andriy_Skulysh@xyratex.com>
Reviewed-by: Alexey Lyashkov <Alexey_Lyashkov@xyratex.com>
Reviewed-on: http://review.whamcloud.com/5843
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Dilger [Sat, 18 Feb 2017 21:47:09 +0000 (16:47 -0500)]
staging: lustre: llite: remove extraneous export parameter
The ll_close_inode_openhandle() and ll_md_close() functions passed an
extra "obd_export *md_exp" parameter, but it turns out that all of the
callers already pass inode->i_sb->s_fs_info->lsi_llsbi->ll_md_exp in
one form or another, so it can just be extracted from "inode" directly
as needed.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6627
Reviewed-on: http://review.whamcloud.com/14953
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yang Sheng [Sat, 18 Feb 2017 21:47:08 +0000 (16:47 -0500)]
staging: lustre: lov: trying smaller memory allocations
Reduce struct lov_io_sub to smaller memory usage
on wide-stripe file systems.
Signed-off-by: Yang Sheng <yang.sheng@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7085
Reviewed-on: http://review.whamcloud.com/17476
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jinshan Xiong [Sat, 18 Feb 2017 21:47:07 +0000 (16:47 -0500)]
staging: lustre: osc: further LRU OSC cleanup after eviction
Define osc_lru_reserve() and osc_lru_unreserve() to reserve LRU
slots in osc_io_write_iter_init() and unreserve them in fini();
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6271
Reviewed-on: http://review.whamcloud.com/16456
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jinshan Xiong [Sat, 18 Feb 2017 21:47:06 +0000 (16:47 -0500)]
staging: lustre: ldlm: handle ldlm lock cancel race when evicting client.
A ldlm lock could be canceled simutaneously by ldlm bl thread and
cleanup_resource(). In this case, only one side will win the race
and the other side should wait for the work to complete. Eviction
on group lock is now well supported.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6271
Reviewed-on: http://review.whamcloud.com/16456
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jinshan Xiong [Sat, 18 Feb 2017 21:47:05 +0000 (16:47 -0500)]
staging: lustre: lov: cleanup when cl_io_iter_init() fails
In lov_io_iter_init(), if cl_io_iter_init() against sub io fails,
it should call cl_io_iter_fini() to cleanup leftover information;
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6271
Reviewed-on: http://review.whamcloud.com/16456
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jinshan Xiong [Sat, 18 Feb 2017 21:47:04 +0000 (16:47 -0500)]
staging: lustre: osc: remove obsolete asserts
Remove the no longer needed assert in the function
osc_cache_truncate_start(). The assertion in
osc_object_prune() will become faulty with upcoming
changes. The reason this will become a problem is
that there may exist freeing pages in object's
radix tree at the time of osc_object_prune(), which
causes failure at the assertion of (osc->oo_npages == 0).
This patch prevents that problem from happening.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6271
Reviewed-on: http://review.whamcloud.com/16456
Reviewed-on: http://review.whamcloud.com/16727
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bobi Jam [Sat, 18 Feb 2017 21:47:03 +0000 (16:47 -0500)]
staging: lustre: llite: omit to update wire data
In ll_setattr_raw(), after op_data->op_attr has been copied, the attr
is updated and op_data->op_attr does not get updated afterward.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6813
Reviewed-on: http://review.whamcloud.com/16462
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bobi Jam [Sat, 18 Feb 2017 21:47:02 +0000 (16:47 -0500)]
staging: lustre: llite: lower message level for ll_setattr_raw()
Truncate and write can happen at the same time, so that a file can
be set modified even though the file is not restored from released
state, and ll_hsm_state_set() is not applicable for the file, and
it will return error in this case, we'd lower the error message level
in this case.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6817
Reviewed-on: http://review.whamcloud.com/15541
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Doug Oucharek [Sat, 18 Feb 2017 18:04:10 +0000 (10:04 -0800)]
staging: lustre: ko2iblnd: Adapt to the removal of ib_get_dma_mr()
In Linux kernel 4.9-rc1, the function ib_get_dma_mr()
was removed and a second parameter was added to ib_alloc_pd().
As this broke the building of the ko2iblnd module in
staging, the Kconfig for LNet has marked ko2iblnd as broken
and stopped building it.
This patch fixes this breakage by:
- Removing the BROKEN tag from lnet/Kconfig.
- Make it so the module parameter map_on_demand can no longer be
zero (we have to configure FMR/FastReg pools; it can no longer be
off).
- No longer try to use the global DMA memory region, but make use
of the FMR/FastReg pool for all RDMA Tx operations.
- Everywhere we are using the device DMA mr to derive the
L-key for non-registered memory regions, use the
pd->local_dma_lkey value instead.
- Make the default map_on_demand = 256. This will allow nodes with
this patch to still connected to older nodes without this patch
and FMR/FastReg turned off. When FMR/FastReg is turned off, we
use 256 as the max frags so the two sides will still be able to
communicate and work.
- Fix a mistake with BUILD_BUG_ON calls in o2iblnd.c which caused
compiling to fail.
Signed-off-by: Doug Oucharek <doug.s.oucharek@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-9026
Reviewed-on: https://review.whamcloud.com/#/c/24931/
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Georgios Emmanouil [Thu, 16 Feb 2017 20:13:32 +0000 (22:13 +0200)]
Staging: wlan-ng: prism2mgmt: Removed an empty line
Removed an empty line.
Signed-off-by: Georgios Emmanouil <geo.emmnl@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gargi Sharma [Sat, 18 Feb 2017 05:37:41 +0000 (11:07 +0530)]
staging: wlan-ng: remove extra parentheses
Removes extra parentheses around function arguments. Issue
detected and resolved using the following coccinelle script:
@@
expression e;
identifier f;
@@
f(...,
-(
e
-)
,...)
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lucian Zala [Thu, 16 Feb 2017 18:42:47 +0000 (20:42 +0200)]
staging: fsl-mc: fix coding style warning
Fix for "WARNING: Avoid multiple line dereference - prefer
'mc_msi_domain->host_data'" found by checkpatch.pl in
bus/irq-gic-v3-its-fsl-mc-msi.c.
Signed-off-by: Lucian Zala <zala.lucian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arushi Singhal [Wed, 22 Feb 2017 18:16:39 +0000 (23:46 +0530)]
staging: xgifb: function prototype argument should also have an identifier name
function prototype argument 'struct vb_device_info *' and 'unsigned
long' should also have an identifier name.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Katie Dunne [Mon, 20 Feb 2017 20:24:40 +0000 (12:24 -0800)]
staging: xgifb: add braces around if-statements
Add braces to instances of if-statements found by checkpatch.pl
to conform to kernel style.
Signed-off-by: Katie Dunne <kdunne@mail.ccsf.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gargi Sharma [Thu, 16 Feb 2017 18:39:55 +0000 (00:09 +0530)]
staging: xgifb: add braces around if statement
add braces around if statment to fix the checkpatch issue, braces {}
should be used on all arms of this statement.
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Perches [Thu, 23 Feb 2017 05:54:57 +0000 (21:54 -0800)]
staging: fbtft: Make some s16 arrays const
Using const reduces data size.
$ size drivers/staging/fbtft/built-in.o*
text data bss dec hex filename
89909 41584 2928 134421 20d15 drivers/staging/fbtft/built-in.o.new
88053 43392 2928 134373 20ce5 drivers/staging/fbtft/built-in.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Perches [Thu, 23 Feb 2017 05:54:56 +0000 (21:54 -0800)]
staging: fbtft: Make the pointers to s16 init arrays const
This allows making some of the actual arrays const.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anthony Brandon [Tue, 21 Feb 2017 13:25:28 +0000 (14:25 +0100)]
staging:fbtft: Fix some warnings regarding types.
Running make C=1 M=drivers/staging/fbtft reports warnings about conversion
from __be16 to unsigned short. Change the type of the variables being
assigned into __be16 to remove those warnings.
Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julián de Gortari [Mon, 20 Feb 2017 03:02:32 +0000 (21:02 -0600)]
Staging: fbtft: fb_watterott: fix incorrect type in assignments
__be16 type variables should be used with return value of macro
cpu_to_be16()
Signed-off-by: Julián de Gortari <kiototeko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gargi Sharma [Thu, 16 Feb 2017 20:11:57 +0000 (01:41 +0530)]
staging: fbtft: Remove blank line
Remove blank line before closing brace to fix the checkpatch
issue blank lines aren't necessary before a close brace '}'.
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gargi Sharma [Thu, 16 Feb 2017 20:11:56 +0000 (01:41 +0530)]
staging: fbtft: Match alignment with open parentheses
Indent code to match alignment with open parentheses, to
fix the checkpatch issue alignment should match open parenthesis.
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Wed, 15 Feb 2017 03:27:25 +0000 (14:27 +1100)]
staging: fbtft: Add check on strlcpy() return value
Return value of strlcpy() is not checked. Name string is silently
truncated if longer that SPI_NAME_SIZE, whilst not detrimental to
the program logic it would be nice to notify the user. Module is
currently quite verbose, adding extra pr_warn() calls will not overly
impact this verbosity.
Check return value from call to strlcpy(). If source string is
truncated call pr_warn() to notify user.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Wed, 15 Feb 2017 03:27:24 +0000 (14:27 +1100)]
staging: fbtft: Replace magic number with constant
Current call to strncmp() uses a magic number. There is a compile
time constant defined for this buffer, included and used already at
other sites in the file.
Remove magic number. Replace with pre-existing compile time constant.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Wed, 15 Feb 2017 03:27:23 +0000 (14:27 +1100)]
staging: fbtft: Fix buffer overflow vulnerability
Module copies a user supplied string (module parameter) into a buffer
using strncpy() and does not check that the buffer is null terminated.
Replace call to strncpy() with call to strlcpy() ensuring that the
buffer is null terminated.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
simran singhal [Wed, 22 Feb 2017 02:01:09 +0000 (07:31 +0530)]
staging: gdm724x: Drop useless initialisation
Removed initialisation of a varible if it is immediately reassigned.
Changes were made using Coccinelle.
@@
type T;
constant C;
expression e;
identifier i;
@@
T i
- = C
;
i = e;
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Javier Rodriguez [Tue, 14 Feb 2017 17:16:22 +0000 (18:16 +0100)]
staging: gdm724x: modify icmp6_checksum for returning a correct data type.
The icmp6_checksum was returning an invalid data type as the expected type
is __sum16. For returning such data type, icmp6_checksum, now, is using
the kernel functions for computing the checksum.
Here, the sparse message:
drivers/staging/gdm724x/gdm_lte.c:311:39: warning: incorrect type in assignment (different base types)
drivers/staging/gdm724x/gdm_lte.c:311:39: expected restricted __sum16 [addressable] [assigned] [usertype] icmp6_cksum
drivers/staging/gdm724x/gdm_lte.c:311:39: got int
Signed-off-by: Javier Rodriguez <jrodbar@yahoo.es>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cheah Kok Cheong [Tue, 21 Feb 2017 17:25:08 +0000 (01:25 +0800)]
Staging: comedi: drivers: comedi_test: Avoid multiple line dereference
Fix checkpatch warning "Avoid multiple line dereference"
using a pointer variable to avoid line wrap.
Signed-off-by: Cheah Kok Cheong <thrust73@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
simran singhal [Tue, 21 Feb 2017 18:28:26 +0000 (23:58 +0530)]
staging: comedi: Using macro DIV_ROUND_UP
The macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) /(d)).
It clarifies the divisor calculations. This occurence was detected using
the coccinelle script:
@@
expression e1;
expression e2;
@@
(
- ((e1) + e2 - 1) / (e2)
+ DIV_ROUND_UP(e1,e2)
|
- ((e1) + (e2 - 1)) / (e2)
+ DIV_ROUND_UP(e1,e2)
)
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Tue, 21 Feb 2017 22:45:41 +0000 (09:45 +1100)]
staging: comedi: s626: Kernel doc format comments
Checkpatch emits WARNING: Block comments use a trailing */ on a
separate line. Offending comments are commenting variables within
the main data structure of s626 driver. We can move these comments
to kernel doc format with the benefit of clearing the warning and
improving the documentation for the driver.
Remove comments on structure members. Add original comments to the
head of the structure definition in kernel doc format.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 17 Feb 2017 11:09:18 +0000 (11:09 +0000)]
staging: comedi: jr3_pci: replace devpriv->iobase with dev->mmio
The "jr3_pci" driver currently uses the `iobase` member of its private
device data `struct jr3_pci_dev_private` to store a pointer to its
ioremapped register region. Use the `mmio` member of the `struct
comedi_device` to store this instead, and remove the `iobase` member.
The `iobase` member was of type `struct jr3_t __iomem *`, with the
board's complicated register layout described by `struct jr3_t`. The
`mmio` member is a generic `void __iomem *`, so its value needs
converting to a `struct jr3_t __iomem *` for our purposes.
Change the clean-up in `jr3_pci_detach()` to call `comedi_pci_detach()`
instead of `comedi_pci_disable()`, as that will iounmap `dev->mmio` for
us.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 17 Feb 2017 11:09:17 +0000 (11:09 +0000)]
staging: comedi: jr3_pci: pass transform by reference
Local function `set_transforms` has a parameter of type `struct
jr3_pci_transform`. This has a size 32 bytes, which is quite large for
passing around in a function call. Change it to use type `const struct
jr3_pci_transform *`. (In practice, it is probably inlined by the
compiler anyway, but doing this seems to save a few bytes.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 17 Feb 2017 11:09:16 +0000 (11:09 +0000)]
staging: comedi: jr3_pci: re-work struct jr3_pci_subdev_private range
The `range` member of `struct jr3_pci_subdev_private` is an array of a
tag-less `struct` type whose layout is similar to `struct
comedi_lrange`. Both `struct` types end with a member also called
`range`. In the case of tag-less `struct` type, it is a single `struct
comedi_krange`. In the case of `struct comedi_lrange`, it is a flexible
array of `struct comedi_krange`.
Elements of the `range` array member in `struct jr3_pci_subdev_private`
are pointed to by elements of the `range_table_list` array member, which
are of type `const struct comedi_lrange *`. This requires some dodgy
type casting.
To avoid the dodgy type casting, change the element type of the `range`
member of `struct jr3_pci_subdev_private` to be a new type `union
jr3_pci_single_range`. This contains a member `l` of type `struct
comedi_lrange`, and an array member `_reserved` that is large enough to
encompass the `struct comedi_lrange` plus a single `struct
comedi_krange`. It is the same size as the previous type. Accesses to
`spriv->range[i].length` and `spriv->range[i].range` are replaced with
`spriv->range[i].l.length` and `spriv->range[i].l.range[0]` respectively
(where `spriv` is a `struct jr3_pci_subdev_private *`, and `i` is an
array index). Type-casted pointers to `spriv->range[i]` are replaced
with pointers to `spriv->range[i].l`, which do not require the type
casts. Since we defined a new type, we can define local variables of
the corresponding pointer type to shorten some lines of code. This is
made use of in `jr3_pci_alloc_spriv()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 17 Feb 2017 11:09:15 +0000 (11:09 +0000)]
staging: comedi: jr3_pci: separate out poll state enum
The type of the `state` member of `struct jr3_pci_subdev_private` is
defined in-situ as an enumerated type without a tag. For aesthetic
reasons, define the type as `enum jr3_pci_poll_state` outside the
containing `struct`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 17 Feb 2017 11:09:14 +0000 (11:09 +0000)]
staging: comedi: jr3_pci: remove next_time_max member
The `next_time_max` member of `struct jr3_pci_subdev_private` is
assigned to, but never read. Remove it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 17 Feb 2017 11:09:13 +0000 (11:09 +0000)]
staging: comedi: jr3_pci: remove unneeded 'spriv' checks
If `jr3_pci_auto_attach()` returns with no error, we can now be sure
that the COMEDI subdevice private data structures have been allocated.
Remove the tests for a valid pointer to the private data structure in
`jr3_pci_ai_insn_read()`, `jr3_pci_open()`, and
`jr3_pci_poll_subdevice()`, since they will not be called if the pointer
is invalid.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 17 Feb 2017 11:09:12 +0000 (11:09 +0000)]
staging: comedi: jr3_pci: re-work firmware copyright display
If debug messages are enabled, the card initialization done in
`jr3_pci_auto_attach()` spits out 24 (0x18) debug messages to show the
null-terminated copyright string embedded in the firmware, one character
at a time, including the ASCII NUL characters at the end. Factor out
the copyright display into a new function `jr3_pci_show_copyright()` and
re-work it to copy the whole copyright string into a buffer, so that it
can be shown with a single debug message.
Incidentally, this also removes a checkpatch warning "Avoid multiple
line dereference" in the original code.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 17 Feb 2017 11:09:11 +0000 (11:09 +0000)]
staging: comedi: jr3_pci: struct comedi_lrange should normally be const
Fix three checkpatch warnings of the form:
WARNING: struct comedi_lrange should normally be const
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 17 Feb 2017 11:09:10 +0000 (11:09 +0000)]
staging: comedi: jr3_pci: Reset all DSPs
The various JR3 PCI models have from 1 to 4 DSPs, one per subdevice.
Prior to loading the firmware to all the DSPs, the initialization code
in `jr3_pci_auto_attach()` resets the first DSP. As far as I can tell,
it should reset all of them. Change it to do so.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 17 Feb 2017 11:09:09 +0000 (11:09 +0000)]
staging: comedi: jr3_pci: cope with jiffies wraparound
The timer expiry routine `jr3_pci_poll_dev()` checks for expiry by
checking whether the absolute value of `jiffies` (stored in local
variable `now`) is greater than the expected expiry time in jiffy units.
This will fail when `jiffies` wraps around. Also, it seems to make
sense to handle the expiry one jiffy earlier than the current test. Use
`time_after_eq()` to check for expiry.
Cc: <stable@vger.kernel.org> # 3.15+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 17 Feb 2017 11:09:08 +0000 (11:09 +0000)]
staging: comedi: jr3_pci: fix possible null pointer dereference
For some reason, the driver does not consider allocation of the
subdevice private data to be a fatal error when attaching the COMEDI
device. It tests the subdevice private data pointer for validity at
certain points, but omits some crucial tests. In particular,
`jr3_pci_auto_attach()` calls `jr3_pci_alloc_spriv()` to allocate and
initialize the subdevice private data, but the same function
subsequently dereferences the pointer to access the `next_time_min` and
`next_time_max` members without checking it first. The other missing
test is in the timer expiry routine `jr3_pci_poll_dev()`, but it will
crash before it gets that far.
Fix the bug by returning `-ENOMEM` from `jr3_pci_auto_attach()` as soon
as one of the calls to `jr3_pci_alloc_spriv()` returns `NULL`. The
COMEDI core will subsequently call `jr3_pci_detach()` to clean up.
Cc: <stable@vger.kernel.org> # 3.15+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sameer Wadgaonkar [Tue, 21 Feb 2017 17:53:31 +0000 (12:53 -0500)]
staging: unisys: visorbus: remove visorchipset_platform_device
Removed visorchipset_platform_device and all the unused structures
and functions and using chipset_dev.acpi_device instead.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sameer Wadgaonkar [Tue, 21 Feb 2017 17:53:30 +0000 (12:53 -0500)]
staging: unisys: visorbus: remove character device interface
Removed the character device interface from visorchipset and
removed the major and minor numbers.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sameer Wadgaonkar [Tue, 21 Feb 2017 17:53:29 +0000 (12:53 -0500)]
staging: unisys: visorbus: added struct visorchipset_device
Added the structure visorchipset_device and moved the globals to
the struct. The visorchipset_init() function saves acpi_device
within this structure.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Binder [Tue, 21 Feb 2017 17:53:28 +0000 (12:53 -0500)]
staging: unisys: visorhba: visorhba_main.c: Remove kernel-doc comments
Removes kernel-doc formatting for comments that precede static functions.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Binder [Tue, 21 Feb 2017 17:53:27 +0000 (12:53 -0500)]
staging: unisys: visornic: visornic_main.c: Remove kernel-doc comments
Removes kernel-doc formatting for comments that precede static functions.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Binder [Tue, 21 Feb 2017 17:53:26 +0000 (12:53 -0500)]
staging: unisys: visorbus: vbuschannel.h: Remove kernel-doc comment
Removes kernel-doc formatting for comment that precedes a static function.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Binder [Tue, 21 Feb 2017 17:53:25 +0000 (12:53 -0500)]
staging: unisys: visorbus: visorchipset.c: Remove kernel-doc comments
Removes kernel-doc formatting for comments that precede static functions.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Binder [Tue, 21 Feb 2017 17:53:24 +0000 (12:53 -0500)]
staging: unisys: visorbus: visorbus_main.c: Remove kernel-doc comments
Removes kernel-doc formatting for comments that precede static functions.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Binder [Tue, 21 Feb 2017 17:53:23 +0000 (12:53 -0500)]
staging: unisys: visorbus: visorchannel.c: Remove kernel-doc comment
Removes kernel-doc formatting for comment that precedes a static function.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Binder [Tue, 21 Feb 2017 17:53:22 +0000 (12:53 -0500)]
staging: unisys: visorhba: Make miscellaneous comment corrections
Fixes miscellaneous comment issues in visorhba_main.c.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Binder [Tue, 21 Feb 2017 17:53:21 +0000 (12:53 -0500)]
staging: unisys: visorbus: Fix spelling mistake
Fixes a minor spelling mistake in a function comment.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Binder [Tue, 21 Feb 2017 17:53:20 +0000 (12:53 -0500)]
staging: unisys: visorbus: Move kernel-doc comment to proper location
Moves kernel-doc comment in front of the function it describes.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 5 Mar 2017 20:59:56 +0000 (12:59 -0800)]
Linux 4.11-rc1
Linus Torvalds [Sun, 5 Mar 2017 01:31:39 +0000 (17:31 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix double-free in batman-adv, from Sven Eckelmann.
2) Fix packet stats for fast-RX path, from Joannes Berg.
3) Netfilter's ip_route_me_harder() doesn't handle request sockets
properly, fix from Florian Westphal.
4) Fix sendmsg deadlock in rxrpc, from David Howells.
5) Add missing RCU locking to transport hashtable scan, from Xin Long.
6) Fix potential packet loss in mlxsw driver, from Ido Schimmel.
7) Fix race in NAPI handling between poll handlers and busy polling,
from Eric Dumazet.
8) TX path in vxlan and geneve need proper RCU locking, from Jakub
Kicinski.
9) SYN processing in DCCP and TCP need to disable BH, from Eric
Dumazet.
10) Properly handle net_enable_timestamp() being invoked from IRQ
context, also from Eric Dumazet.
11) Fix crash on device-tree systems in xgene driver, from Alban Bedel.
12) Do not call sk_free() on a locked socket, from Arnaldo Carvalho de
Melo.
13) Fix use-after-free in netvsc driver, from Dexuan Cui.
14) Fix max MTU setting in bonding driver, from WANG Cong.
15) xen-netback hash table can be allocated from softirq context, so use
GFP_ATOMIC. From Anoob Soman.
16) Fix MAC address change bug in bgmac driver, from Hari Vyas.
17) strparser needs to destroy strp_wq on module exit, from WANG Cong.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits)
strparser: destroy workqueue on module exit
sfc: fix IPID endianness in TSOv2
sfc: avoid max() in array size
rds: remove unnecessary returned value check
rxrpc: Fix potential NULL-pointer exception
nfp: correct DMA direction in XDP DMA sync
nfp: don't tell FW about the reserved buffer space
net: ethernet: bgmac: mac address change bug
net: ethernet: bgmac: init sequence bug
xen-netback: don't vfree() queues under spinlock
xen-netback: keep a local pointer for vif in backend_disconnect()
netfilter: nf_tables: don't call nfnetlink_set_err() if nfnetlink_send() fails
netfilter: nft_set_rbtree: incorrect assumption on lower interval lookups
netfilter: nf_conntrack_sip: fix wrong memory initialisation
can: flexcan: fix typo in comment
can: usb_8dev: Fix memory leak of priv->cmd_msg_buffer
can: gs_usb: fix coding style
can: gs_usb: Don't use stack memory for USB transfers
ixgbe: Limit use of 2K buffers on architectures with 256B or larger cache lines
ixgbe: update the rss key on h/w, when ethtool ask for it
...
Linus Torvalds [Sat, 4 Mar 2017 19:36:19 +0000 (11:36 -0800)]
Merge tag 'kvm-4.11-2' of git://git./virt/kvm/kvm
Pull more KVM updates from Radim Krčmář:
"Second batch of KVM changes for the 4.11 merge window:
PPC:
- correct assumption about ASDR on POWER9
- fix MMIO emulation on POWER9
x86:
- add a simple test for ioperm
- cleanup TSS (going through KVM tree as the whole undertaking was
caused by VMX's use of TSS)
- fix nVMX interrupt delivery
- fix some performance counters in the guest
... and two cleanup patches"
* tag 'kvm-4.11-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: nVMX: Fix pending events injection
x86/kvm/vmx: remove unused variable in segment_base()
selftests/x86: Add a basic selftest for ioperm
x86/asm: Tidy up TSS limit code
kvm: convert kvm.users_count from atomic_t to refcount_t
KVM: x86: never specify a sample period for virtualized in_tx_cp counters
KVM: PPC: Book3S HV: Don't use ASDR for real-mode HPT faults on POWER9
KVM: PPC: Book3S HV: Fix software walk of guest process page tables
Linus Torvalds [Sat, 4 Mar 2017 19:32:18 +0000 (11:32 -0800)]
Merge tag 'docs-4.11-fixes' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A few fixes for the docs tree, including one for a 4.11 build
regression"
* tag 'docs-4.11-fixes' of git://git.lwn.net/linux:
Documentation/sphinx: fix primary_domain configuration
docs: Fix htmldocs build failure
doc/ko_KR/memory-barriers: Update control-dependencies section
pcieaer doc: update the link
Documentation: Update path to sysrq.txt
Linus Torvalds [Sat, 4 Mar 2017 19:26:18 +0000 (11:26 -0800)]
Merge tag 'staging-4.11-rc1-part2' of git://git./linux/kernel/git/gregkh/staging
Pull staging/IIO driver fixes from Greg KH:
"Here are a few small staging and IIO driver fixes for issues that
showed up after the big set if changes you merged last week.
Nothing major, just small bugs resolved in some IIO drivers, a lustre
allocation fix, and some RaspberryPi driver fixes for reported
problems, as well as a MAINTAINERS entry update.
All of these have been in linux-next for a week with no reported
issues"
* tag 'staging-4.11-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: fsl-mc: fix warning in DT ranges parser
MAINTAINERS: Remove Noralf Trønnes as fbtft maintainer
staging: vchiq_2835_arm: Make cache-line-size a required DT property
staging: bcm2835/mmal-vchiq: unlock on error in buffer_from_host()
staging/lustre/lnet: Fix allocation size for sv_cpt_data
iio: adc: xilinx: Fix error handling
iio: 104-quad-8: Fix off-by-one error when addressing flag register
iio: adc: handle unknow of_device_id data
Linus Torvalds [Sat, 4 Mar 2017 18:42:53 +0000 (10:42 -0800)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- vmalloc stack regression in CCM
- Build problem in CRC32 on ARM
- Memory leak in cavium
- Missing Kconfig dependencies in atmel and mediatek
- XTS Regression on some platforms (s390 and ppc)
- Memory overrun in CCM test vector
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: vmx - Use skcipher for xts fallback
crypto: vmx - Use skcipher for cbc fallback
crypto: testmgr - Pad aes_ccm_enc_tv_template vector
crypto: arm/crc32 - add build time test for CRC instruction support
crypto: arm/crc32 - fix build error with outdated binutils
crypto: ccm - move cbcmac input off the stack
crypto: xts - Propagate NEED_FALLBACK bit
crypto: api - Add crypto_requires_off helper
crypto: atmel - CRYPTO_DEV_MEDIATEK should depend on HAS_DMA
crypto: atmel - CRYPTO_DEV_ATMEL_TDES and CRYPTO_DEV_ATMEL_SHA should depend on HAS_DMA
crypto: cavium - fix leak on curr if curr->head fails to be allocated
crypto: cavium - Fix couple of static checker errors
Linus Torvalds [Sat, 4 Mar 2017 05:44:35 +0000 (21:44 -0800)]
Merge branch 'work.misc' of git://git./linux/kernel/git/viro/vfs
Pull misc final vfs updates from Al Viro:
"A few unrelated patches that got beating in -next.
Everything else will have to go into the next window ;-/"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
hfs: fix hfs_readdir()
selftest for default_file_splice_read() infoleak
9p: constify ->d_name handling
Linus Torvalds [Sat, 4 Mar 2017 05:36:56 +0000 (21:36 -0800)]
Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is the set of stuff that didn't quite make the initial pull and a
set of fixes for stuff which did.
The new stuff is basically lpfc (nvme), qedi and aacraid. The fixes
cover a lot of previously submitted stuff, the most important of which
probably covers some of the failing irq vectors allocation and other
fallout from having the SCSI command allocated as part of the block
allocation functions"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (59 commits)
scsi: qedi: Fix memory leak in tmf response processing.
scsi: aacraid: remove redundant zero check on ret
scsi: lpfc: use proper format string for dma_addr_t
scsi: lpfc: use div_u64 for 64-bit division
scsi: mac_scsi: Fix MAC_SCSI=m option when SCSI=m
scsi: cciss: correct check map error.
scsi: qla2xxx: fix spelling mistake: "seperator" -> "separator"
scsi: aacraid: Fixed expander hotplug for SMART family
scsi: mpt3sas: switch to pci_alloc_irq_vectors
scsi: qedf: fixup compilation warning about atomic_t usage
scsi: remove scsi_execute_req_flags
scsi: merge __scsi_execute into scsi_execute
scsi: simplify scsi_execute_req_flags
scsi: make the sense header argument to scsi_test_unit_ready mandatory
scsi: sd: improve TUR handling in sd_check_events
scsi: always zero sshdr in scsi_normalize_sense
scsi: scsi_dh_emc: return success in clariion_std_inquiry()
scsi: fix memory leak of sdpk on when gd fails to allocate
scsi: sd: make sd_devt_release() static
scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.
...
WANG Cong [Fri, 3 Mar 2017 20:21:14 +0000 (12:21 -0800)]
strparser: destroy workqueue on module exit
Fixes:
43a0c6751a32 ("strparser: Stream parser for messages")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 4 Mar 2017 04:40:06 +0000 (20:40 -0800)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for your net tree,
they are:
1) Missing check for full sock in ip_route_me_harder(), from
Florian Westphal.
2) Incorrect sip helper structure initilization that breaks it when
several ports are used, from Christophe Leroy.
3) Fix incorrect assumption when looking up for matching with adjacent
intervals in the nft_set_rbtree.
4) Fix broken netlink event error reporting in nf_tables that results
in misleading ESRCH errors propagated to userspace listeners.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 4 Mar 2017 00:48:48 +0000 (16:48 -0800)]
Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A fix and regression test case for nvdimm namespace label
compatibility.
Details:
- An "nvdimm namespace label" is metadata on an nvdimm that
provisions dimm capacity into a "namespace" that can host a block
device / dax-filesytem, or a device-dax character device.
A namespace is an object that other operating environment and
platform firmware needs to comprehend for capabilities like booting
from an nvdimm.
The label metadata contains a checksum that Linux was not
calculating correctly leading to other environments rejecting the
Linux label.
These have received a build success notification from the kbuild
robot, and a positive test result from Nick who reported the problem"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nfit, libnvdimm: fix interleave set cookie calculation
tools/testing/nvdimm: make iset cookie predictable
Linus Torvalds [Sat, 4 Mar 2017 00:44:21 +0000 (16:44 -0800)]
Merge tag 'pci-v4.11-fixes-1' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- fix NULL pointer dereferences in many DesignWare-based drivers due to
refactoring error
- fix Altera config write breakage due to my refactoring error
* tag 'pci-v4.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: altera: Fix TLP_CFG_DW0 for TLP write
PCI: dwc: Fix crashes seen due to missing assignments
Linus Torvalds [Sat, 4 Mar 2017 00:20:06 +0000 (16:20 -0800)]
Merge branch 'parisc-4.11-1' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fixes and cleanups from Helge Deller:
"Nothing really important in this patchset: fix resource leaks in error
paths, coding style cleanups and code removal"
* 'parisc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Remove flush_user_dcache_range and flush_user_icache_range
parisc: fix a printk
parisc: ccio-dma: Handle return NULL error from ioremap_nocache
parisc: Define access_ok() as macro
parisc: eisa: Fix resource leaks in error paths
parisc: eisa: Remove coding style errors
Linus Torvalds [Sat, 4 Mar 2017 00:17:55 +0000 (16:17 -0800)]
Merge tag 'xtensa-
20170303' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa updates from Max Filippov:
- clean up bootable image build targets: provide separate 'Image',
'zImage' and 'uImage' make targets that only build corresponding
image type. Make 'all' build all images appropriate for a platform
- allow merging vectors code into .text section as a preparation step
for XIP support
- fix handling external FDT when the kernel is built without
BLK_DEV_INITRD support
* tag 'xtensa-
20170303' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: allow merging vectors into .text section
xtensa: clean up bootable image build targets
xtensa: move parse_tag_fdt out of #ifdef CONFIG_BLK_DEV_INITRD
Linus Torvalds [Sat, 4 Mar 2017 00:15:48 +0000 (16:15 -0800)]
Merge tag 'armsoc-late' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC late DT updates from Arnd Bergmann:
"These updates have been kept in a separate branch mostly because they
rely on updates to the respective clk drivers to keep the shared
header files in sync.
This includes two branches for arm64 dt updates, both following up on
earlier changes for the same platforms that are already merged:
Samsung:
- add USB3 support in Exynos7
- minor PM related updates
Amlogic:
- new machines: WeTek Set-top-boxes
- various devices added to DT
There are also a couple of bugfixes that trickled in since the start
of the merge window:
- The moxart_defconfig was not building the intended platform
- CPU-hotplug was broken on ux500
- Coresight was broken on Juno (never worked)"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
ARM: deconfig: fix the moxart defconfig
ARM: ux500: resume the second core properly
arm64: dts: juno: update definition for programmable replicator
arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost
arm64: dts: exynos: Add USB 3.0 controller node for Exynos7
arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7
pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions
arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e
ARM64: dts: meson-gxbb-p200: add ADC laddered keys
ARM64: dts: meson: meson-gx: add the SAR ADC
ARM64: dts: meson-gxl: add the pwm_ao_b pin
ARM64: dts: meson-gx: add the missing pwm_AO_ab node
clk: gxbb: fix CLKID_ETH defined twice
ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
clk: gxbb: add the SAR ADC clocks and expose them
dt-bindings: amlogic: Add WeTek boards
ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
dt-bindings: vendor-prefix: Add wetek vendor prefix
ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency
ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes
...
Linus Torvalds [Sat, 4 Mar 2017 00:00:59 +0000 (16:00 -0800)]
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull SMB3 fixes from Steve French:
"Some small bug fixes as well as SMB2.1/SMB3 enablement for DFS (global
namespace) which previously was only enabled for CIFS"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
smb2: Enforce sec= mount option
CIFS: Fix sparse warnings
CIFS: implement get_dfs_refer for SMB2+
CIFS: use DFS pathnames in SMB2+ Create requests
CIFS: set signing flag in SMB2+ TreeConnect if needed
CIFS: let ses->ipc_tid hold smb2 TreeIds
CIFS: add use_ipc flag to SMB2_ioctl()
CIFS: add build_path_from_dentry_optional_prefix()
CIFS: move DFS response parsing out of SMB1 code
CIFS: Fix possible use after free in demultiplex thread
John Keeping [Fri, 3 Mar 2017 12:24:05 +0000 (12:24 +0000)]
Documentation/sphinx: fix primary_domain configuration
With Sphinx 1.5.3 I get the warning:
WARNING: primary_domain 'C' not found, ignored.
It seems that domain names in Sphinx are case-sensitive and for the C
domain the name must be lower case.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Martyn Welch [Fri, 3 Mar 2017 22:43:30 +0000 (22:43 +0000)]
docs: Fix htmldocs build failure
Build of HTML docs failing due to conversion of deviceiobook.tmpl in
8a8a602f and regulator.tmpl in
028f2533 to RST without removing from
DOCBOOKS in Makefile, resulting (in the case of deviceiobook) the
following error:
make[1]: *** No rule to make target 'Documentation/DocBook/deviceiobook.xml', needed by 'Documentation/DocBook/deviceiobook.aux.xml'. Stop.
Makefile:1452: recipe for target 'htmldocs' failed
make: *** [htmldocs] Error 2
Update DOCBOOKS to reflect available books.
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
SeongJae Park [Fri, 3 Mar 2017 06:44:02 +0000 (15:44 +0900)]
doc/ko_KR/memory-barriers: Update control-dependencies section
This commit applies upstream change, commit
c8241f8553e8 ("doc: Update
control-dependencies section of memory-barriers.txt"), to Korean
translation.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Cao jin [Wed, 1 Mar 2017 09:05:28 +0000 (17:05 +0800)]
pcieaer doc: update the link
The original link is empty, replace it.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Krzysztof Kozlowski [Fri, 24 Feb 2017 08:42:14 +0000 (10:42 +0200)]
Documentation: Update path to sysrq.txt
Commit
9d85025b0418 ("docs-rst: create an user's manual book") moved the
sysrq.txt leaving old paths in the kernel docs.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Linus Torvalds [Fri, 3 Mar 2017 20:14:13 +0000 (12:14 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse
Pull fuse update from Miklos Szeredi:
"A bugfix and cleanups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: release: private_data cannot be NULL
fuse: cleanup fuse_file refcounting
fuse: add missing FR_FORCE
Linus Torvalds [Fri, 3 Mar 2017 19:55:57 +0000 (11:55 -0800)]
Merge branch 'overlayfs-linus' of git://git./linux/kernel/git/mszeredi/vfs
Pull overlayfs updates from Miklos Szeredi:
"Because copy up can take a long time, serialized copy ups could be a
big performance bottleneck. This update allows concurrent copy up of
regular files eliminating this potential problem.
There are also minor fixes"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: drop CAP_SYS_RESOURCE from saved mounter's credentials
ovl: properly implement sync_filesystem()
ovl: concurrent copy up of regular files
ovl: introduce copy up waitqueue
ovl: copy up regular file using O_TMPFILE
ovl: rearrange code in ovl_copy_up_locked()
ovl: check if upperdir fs supports O_TMPFILE
Linus Torvalds [Fri, 3 Mar 2017 19:38:56 +0000 (11:38 -0800)]
Merge branch 'rebased-statx' of git://git./linux/kernel/git/viro/vfs
Pull vfs 'statx()' update from Al Viro.
This adds the new extended stat() interface that internally subsumes our
previous stat interfaces, and allows user mode to specify in more detail
what kind of information it wants.
It also allows for some explicit synchronization information to be
passed to the filesystem, which can be relevant for network filesystems:
is the cached value ok, or do you need open/close consistency, or what?
From David Howells.
Andreas Dilger points out that the first version of the extended statx
interface was posted June 29, 2010:
https://www.spinics.net/lists/linux-fsdevel/msg33831.html
* 'rebased-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
statx: Add a system call to make enhanced file info available
Linus Torvalds [Fri, 3 Mar 2017 18:53:35 +0000 (10:53 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
"A collection of fixes for this merge window, either fixes for existing
issues, or parts that were waiting for acks to come in. This pull
request contains:
- Allocation of nvme queues on the right node from Shaohua.
This was ready long before the merge window, but waiting on an ack
from Bjorn on the PCI bit. Now that we have that, the three patches
can go in.
- Two fixes for blk-mq-sched with nvmeof, which uses hctx specific
request allocations. This caused an oops. One part from Sagi, one
part from Omar.
- A loop partition scan deadlock fix from Omar, fixing a regression
in this merge window.
- A three-patch series from Keith, closing up a hole on clearing out
requests on shutdown/resume.
- A stable fix for nbd from Josef, fixing a leak of sockets.
- Two fixes for a regression in this window from Jan, fixing a
problem with one of his earlier patches dealing with queue vs bdi
life times.
- A fix for a regression with virtio-blk, causing an IO stall if
scheduling is used. From me.
- A fix for an io context lock ordering problem. From me"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: Move bdi_unregister() to del_gendisk()
blk-mq: ensure that bd->last is always set correctly
block: don't call ioc_exit_icq() with the queue lock held for blk-mq
block: Initialize bd_bdi on inode initialization
loop: fix LO_FLAGS_PARTSCAN hang
nvme: Complete all stuck requests
blk-mq: Provide freeze queue timeout
blk-mq: Export blk_mq_freeze_queue_wait
nbd: stop leaking sockets
blk-mq: move update of tags->rqs to __blk_mq_alloc_request()
blk-mq: kill blk_mq_set_alloc_data()
blk-mq: make blk_mq_alloc_request_hctx() allocate a scheduler request
blk-mq-sched: Allocate sched reserved tags as specified in the original queue tagset
nvme: allocate nvme_queue in correct node
PCI: add an API to get node from vector
blk-mq: allocate blk_mq_tags and requests in correct node
Linus Torvalds [Fri, 3 Mar 2017 18:16:38 +0000 (10:16 -0800)]
Merge branch 'WIP.sched-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull sched.h split-up from Ingo Molnar:
"The point of these changes is to significantly reduce the
<linux/sched.h> header footprint, to speed up the kernel build and to
have a cleaner header structure.
After these changes the new <linux/sched.h>'s typical preprocessed
size goes down from a previous ~0.68 MB (~22K lines) to ~0.45 MB (~15K
lines), which is around 40% faster to build on typical configs.
Not much changed from the last version (-v2) posted three weeks ago: I
eliminated quirks, backmerged fixes plus I rebased it to an upstream
SHA1 from yesterday that includes most changes queued up in -next plus
all sched.h changes that were pending from Andrew.
I've re-tested the series both on x86 and on cross-arch defconfigs,
and did a bisectability test at a number of random points.
I tried to test as many build configurations as possible, but some
build breakage is probably still left - but it should be mostly
limited to architectures that have no cross-compiler binaries
available on kernel.org, and non-default configurations"
* 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (146 commits)
sched/headers: Clean up <linux/sched.h>
sched/headers: Remove #ifdefs from <linux/sched.h>
sched/headers: Remove the <linux/topology.h> include from <linux/sched.h>
sched/headers, hrtimer: Remove the <linux/wait.h> include from <linux/hrtimer.h>
sched/headers, x86/apic: Remove the <linux/pm.h> header inclusion from <asm/apic.h>
sched/headers, timers: Remove the <linux/sysctl.h> include from <linux/timer.h>
sched/headers: Remove <linux/magic.h> from <linux/sched/task_stack.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/init.h>
sched/core: Remove unused prefetch_stack()
sched/headers: Remove <linux/rculist.h> from <linux/sched.h>
sched/headers: Remove the 'init_pid_ns' prototype from <linux/sched.h>
sched/headers: Remove <linux/signal.h> from <linux/sched.h>
sched/headers: Remove <linux/rwsem.h> from <linux/sched.h>
sched/headers: Remove the runqueue_is_locked() prototype
sched/headers: Remove <linux/sched.h> from <linux/sched/hotplug.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/debug.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/nohz.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/stat.h>
sched/headers: Remove the <linux/gfp.h> include from <linux/sched.h>
sched/headers: Remove <linux/rtmutex.h> from <linux/sched.h>
...