OSDN Git Service
Roy Spliet [Fri, 12 Sep 2014 16:00:14 +0000 (18:00 +0200)]
drm/nv50/fb/ram: Store the number of partitions in the designated fields
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Fri, 12 Sep 2014 16:00:13 +0000 (18:00 +0200)]
drm/nv50/kms: Set VBLANK time in modeset script
Solves blinking on reclocking memory. The value set is an underestimate, but
with non-reduced vblanking this should give us plenty of time
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Fri, 12 Sep 2014 16:00:12 +0000 (18:00 +0200)]
drm/nouveau/bios: Add rammap support for version 1.0
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 11 Sep 2014 13:32:20 +0000 (23:32 +1000)]
drm/gf100-/pwr/memx: block host and fifo around reclock
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 11 Sep 2014 13:04:22 +0000 (23:04 +1000)]
drm/nouveau/pwr/memx: fix command ordering around block/unblock
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 11 Sep 2014 12:59:13 +0000 (22:59 +1000)]
drm/nouveau/pwr/memx: rename fb off/on to block/unblock
More accurate as to the function of the opcodes. Not only is FB disabled,
but the host is prevented from touching the GPU. An upcoming patch for
Kepler will also halt PFIFO (as NVIDIA does).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Fri, 29 Aug 2014 10:27:42 +0000 (12:27 +0200)]
drm/nva3/clk: Pause the GPU before reclocking
V2: always call post correctly even if pre fails
V3: move function prototype to nva3.h
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Emil Velikov [Mon, 8 Sep 2014 19:27:57 +0000 (20:27 +0100)]
drm/nouveau/gpio: rename g92 class to g94
nv92 hardware has only 16 interrupt lines, while nv94 and later
has 32. Accessing 0xe0c{0,4} registers on nv92 can lead to incorrect
PDISP setup. This is a regression introduced with
commit
9d0f5ec9ee0fd5dc5fc1cc2cf559286431e406e3
Author: Ben Skeggs <bskeggs@redhat.com>
Date: Mon May 12 15:22:42 2014 +1000
gpio: split g92 class from nv50
Reported-by: estece on #nouveau
Cc: stable@vger.kernel.org # 3.16+
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 8 Sep 2014 05:21:48 +0000 (15:21 +1000)]
drm/gk104-/fb/ram: move fb enable/disable to same place as nvidia
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 3 Sep 2014 06:26:20 +0000 (16:26 +1000)]
drm/gk104/fb/ram: twiddle some more bits when reclocking
*when* this is done is only a rough approximation of what the binary driver
does.. need to investigate more to see if it matters
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 3 Sep 2014 06:25:47 +0000 (16:25 +1000)]
drm/nouveau/bios: parse another large chunk of random memory config data
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 8 Sep 2014 04:41:26 +0000 (14:41 +1000)]
drm/gk104-/fb/ram: perform certain steps only when bios data differs
Awful, awful. But, on the GK106 I have, some upcoming patches show
that this is actually necessary after all.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 8 Sep 2014 03:29:04 +0000 (13:29 +1000)]
drm/gk104-/fb/ram: parse ramcfg data for all frequencies up-front
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 8 Sep 2014 03:38:02 +0000 (13:38 +1000)]
drm/gk104-/fb/ram: use parsed timing data in mr routines
All the other chipsets should be moved over to this too. It's not needed
yet for the upcoming commits, so left this step as it'll conflict badly
with Roy's GT21x reclocking work.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 8 Sep 2014 02:48:31 +0000 (12:48 +1000)]
drm/nouveau/bios: parse freq ranges and timing id into ramcfg struct
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 8 Sep 2014 00:33:32 +0000 (10:33 +1000)]
drm/nouveau/bios: memset dcb struct to zero before parsing
Fixes type/mask calculation being based on uninitialised data for VGA
outputs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 3 Sep 2014 02:40:04 +0000 (12:40 +1000)]
drm/gk104/fb/ram: make use of training data provided by vbios
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 1 Sep 2014 05:42:45 +0000 (15:42 +1000)]
drm/nouveau/bios: add support for parsing table at BIT 'M' v2 + 0x09
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 1 Sep 2014 05:33:14 +0000 (15:33 +1000)]
drm/nouveau/bios: add support for parsing table at BIT 'M' v2 + 0x05
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 1 Sep 2014 01:15:21 +0000 (11:15 +1000)]
drm/gk104/fb/ram: fix register for second set of training data
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 1 Sep 2014 00:48:39 +0000 (10:48 +1000)]
drm/gk104/fb/ram: more random magic in fb init
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 1 Sep 2014 00:44:57 +0000 (10:44 +1000)]
drm/gk104/fb/ram: skip table entry for mode we're already in
NVIDIA binary driver appears to, not sure if it's for a good reason, but
grasping at straws for some GDDR5 reclocking issues here.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Fri, 5 Sep 2014 00:41:46 +0000 (02:41 +0200)]
drm/nouveau/fb/sddr2: Generate MR values
V2: Always disable DLL reset
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 4 Sep 2014 14:58:54 +0000 (16:58 +0200)]
drm/nouveau/fb/sddr3: Expand MR generation
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 4 Sep 2014 14:58:53 +0000 (16:58 +0200)]
drm/nva3/pwr/memx: Match blob's fb access behaviour
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 4 Sep 2014 14:58:52 +0000 (16:58 +0200)]
drm/nouveau/pwr/memx: Return debugging information
Time measured from disabling FB to re-enabling, PPWR_IN reveals status of
heads at the end of script. Helps debug various issues (like flicker).
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 4 Sep 2014 14:58:50 +0000 (16:58 +0200)]
drm/nouveau/pwr/memx: Make FB disable and enable explicit
Needs to be done after wait-for-VBLANK, and NVA3 requires register writes
in between.
Rather than hard-coding register writes, just split out fb_disable and
fb_enable.
v2. Squashed "fb/ramnve0: disable fb before reclocking"
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 4 Sep 2014 14:58:49 +0000 (16:58 +0200)]
drm/nva3/pwr/memx: Implement "wait for VBLANK"
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 24 Aug 2014 21:15:11 +0000 (23:15 +0200)]
drm/nouveau/therm/nv84+: do not expose non-calibrated internal temp sensor
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 24 Aug 2014 21:15:10 +0000 (23:15 +0200)]
drm/nouveau/therm: make sure the temperature settings are sane on nv84+
One of my nv92 has a calibrated internal sensor but it displays 0°C
as the default values use sw calibration values to force the temperature
to 0.
Since we cannot read the temperature from the adt7473 present on this board,
let's re-enable the internal reading!
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Mon, 25 Aug 2014 22:26:38 +0000 (00:26 +0200)]
drm/nouveau/subdev: add a pfuse subdev v2
We will use this subdev to disable temperature reading on cards that did not
get a sensor calibration in the factory.
v2:
- rename "nouveau_fuse_rd32" to "gxXXX_fuse_rd32" as adviced by Christian Costa
- fold the code a little as adviced by Emil Velikov
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 21 Aug 2014 11:45:17 +0000 (13:45 +0200)]
drm/nva3/clk: Set intermediate core clock on reclocking
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 21 Aug 2014 11:45:16 +0000 (13:45 +0200)]
drm/nva3/clk: For PLL clocks always make sure the PLL is not in use
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 21 Aug 2014 11:45:15 +0000 (13:45 +0200)]
drm/nva3/clk: Abort when PLL doesn't lock
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 21 Aug 2014 11:45:14 +0000 (13:45 +0200)]
drm/nva3/clk: HOST clock
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 21 Aug 2014 11:45:13 +0000 (13:45 +0200)]
drm/nva3/clk: Set PLL refclk
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 21 Aug 2014 11:45:12 +0000 (13:45 +0200)]
drm/nva3/clk: Parse clock control registers more accurately
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Pierre Moreau [Mon, 18 Aug 2014 20:32:53 +0000 (22:32 +0200)]
drm/nouveau: Fix duplicate definition of NV04_PFB_BOOT_0_*
Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Pierre Moreau [Mon, 18 Aug 2014 20:43:24 +0000 (22:43 +0200)]
drm/nouveau: Display Nouveau boot options at launch
It can help to remove any ambiguity about which options were passed to Nouveau,
especially in case the user had some options set in /etc/modprobe.d/*.conf that
he forgot about, as they won't appear in a dmesg.
Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 18 Aug 2014 02:41:57 +0000 (12:41 +1000)]
drm/nouveau/pwr: wait for scrubbers to finish before uploading new ucode
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 17 Aug 2014 15:33:14 +0000 (17:33 +0200)]
drm/nouveau/pwr/fuc: make $r1-$r10 registers callee-saved in kernel.fuc
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 17 Aug 2014 15:33:13 +0000 (17:33 +0200)]
drm/nouveau/pwr/fuc: add ld/st macros
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 17 Aug 2014 15:33:12 +0000 (17:33 +0200)]
drm/nouveau/pwr: add helpers for delay-to-ticks and ticks-to-delay
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 17 Aug 2014 15:33:11 +0000 (17:33 +0200)]
drm/nouveau/pwr: add some arith functions (mul32_32_64, subu64 and addu64)
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 17 Aug 2014 15:33:10 +0000 (17:33 +0200)]
drm/nouveau/pwr: fix the timers implementation with concurent processes
The problem with the current implementation is that adding a timer improperly
checked which process would time up first by not taking into account how much
time elapsed since their timer got scheduled. Rework the re-scheduling
decision t fix this.
The catch with this fix is that we are limited to scheduling timers of up to
2^31 ticks to avoid any potential overflow. Since we are unlikely to need to
wait for more than a second, this won't be a problem :)
Another possible fix would be to decrement the timeouts of all processes but
it would duplicate a lot of code and dealing with edge cases wasn't pretty
last time I checked.
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 17 Aug 2014 15:33:09 +0000 (17:33 +0200)]
drm/nouveau/ppwr: enable ppwr on gm107
For some reason, it is now required to wait a 20 µs after the 0x200 reset of
the engine.
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 17 Aug 2014 15:33:08 +0000 (17:33 +0200)]
drm/gm107/therm: add PWM fan support v2
v2: change the copyright ownership from "Nouveau Community" to myself, as per
Illia's recommendation.
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 17 Aug 2014 15:33:07 +0000 (17:33 +0200)]
drm/nouveau/therm/fan: do not use the pwm mode when the vbios tells us to use toggle
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 17 Aug 2014 15:33:06 +0000 (17:33 +0200)]
drm/nouveau/bios/fan: add support for maxwell's fan management table v2
Re-use the therm-exported fan structure with only two minor modifications:
- pwm_freq: u16 -> u32;
- add fan_type (toggle or PWM)
v2:
- Do not memset the table to 0 as it erases the pre-set default values
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Aug 2014 05:16:16 +0000 (15:16 +1000)]
drm/nouveau/ltc: allocate tagram from memory that spans all partitions
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Aug 2014 04:30:52 +0000 (14:30 +1000)]
drm/nouveau/core/mm: allow allocation to be confined to a specific slice of heap
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Aug 2014 03:54:37 +0000 (13:54 +1000)]
drm/nouveau/core/mm: fill in holes with "allocated" nodes
The allocation algorithm doesn't expect there to be holes in the mm, which
causes its alignment/cutoff calculations to choke (and go negative) when
encountering the last chunk of a block before a hole.
The least expensive solution is to simply fill in any holes with nodes
that are pre-marked as being allocated.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Aug 2014 04:48:28 +0000 (14:48 +1000)]
drm/nouveau/core/mm: dump mm when trying to tear one down that still has allocations
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Aug 2014 03:40:42 +0000 (13:40 +1000)]
drm/nouveau/core/mm: modify test for if building a mm with holes in it
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Aug 2014 01:16:58 +0000 (11:16 +1000)]
drm/nouveau/core/mm: make it clearer what (type == 0) means
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Aug 2014 00:22:31 +0000 (10:22 +1000)]
drm/gf100/ltc: translate interrupt status into more meaningful names
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Aug 2014 00:01:13 +0000 (10:01 +1000)]
drm/nouveau/ltc: drop workaround for an interrupt storm that no longer happens
This is really the wrong thing to do, but at the time it was our only
option to prevent worse issues.
We no longer cause quite so much anger from LTC, so it's not needed.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 11 Aug 2014 04:38:10 +0000 (14:38 +1000)]
drm/nv50-/disp: add support for completion events
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 11 Aug 2014 03:56:56 +0000 (13:56 +1000)]
drm/nouveau/core: pass related object into notify constructor
The event source types/index might need to be derived from it.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 11 Aug 2014 02:23:23 +0000 (12:23 +1000)]
drm/nouveau/bar: ioremap only the areas that we're actually using
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Dave Airlie [Fri, 12 Sep 2014 21:01:49 +0000 (07:01 +1000)]
Merge tag 'topic/drm-header-rework-2014-09-12' of git://anongit.freedesktop.org/drm-intel into drm-next
So here's the header cleanup, rebased on top of drm-next. Two new header
files are created here:
- drivers/gpu/drm/drm_internal.h for non-legacy drm.ko private
declarations.
- include/drm/drm_legacy.h for legacy interfaces used by non-kms drivers.
And of course lots fo stuff gets shuffled into the already existing
drivers/gpu/drm/drm_legacy.h for drm.ko internal stuff.
topic branch smoke-tested in drm-intel-nightly for a bit. And the 0day
tester also worked through it (and found a few places I didn't add a
static to functions).
* tag 'topic/drm-header-rework-2014-09-12' of git://anongit.freedesktop.org/drm-intel:
drm: Move DRM_MAGIC_HASH_ORDER into drm_drv.c
drm: Move drm_class to drm_internal.h
drm: Move LOCK_TEST_WITH_RETURN to <drm/drm_legacy.h>
drm: Move legacy buffer structures to <drm/drm_legacy.h>
drm: Move drm_memory.c map support declarations to <drm/drm_legacy.h>
drm: Purge ioctl forward declarations from drmP.h
drm: unexport drm_global_mutex
drm: Move piles of functions from drmP.h to drm_internal.h
drm: Move vblank related module options into drm_irq.c
drm: Drop drm_sysfs_class from drmP.h
drm: Move __drm_pci_free to drm_legacy.h
drm: Create drm legacy driver header
drm: Move drm_legacy_vma_flush into drm_legacy.h
drm: Move sg functions into drm_legacy.h
drm: Move dma functions into drm_legacy.h
Daniel Vetter [Wed, 10 Sep 2014 10:44:00 +0000 (12:44 +0200)]
drm: Move DRM_MAGIC_HASH_ORDER into drm_drv.c
Only used in one place ever, so put it right next to that.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 10 Sep 2014 10:43:59 +0000 (12:43 +0200)]
drm: Move drm_class to drm_internal.h
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 10 Sep 2014 10:43:58 +0000 (12:43 +0200)]
drm: Move LOCK_TEST_WITH_RETURN to <drm/drm_legacy.h>
Unfortunately we can't move struct drm_lock_data easily since
it's embedded into struct drm_master. And figuring out where exactly
this struct should be allocated isn't that simple ...
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 11 Sep 2014 05:43:25 +0000 (07:43 +0200)]
drm: Move legacy buffer structures to <drm/drm_legacy.h>
A few odd cases:
- mgag200 someho had a totally unused drm_dma_handle_t. Remove it.
- i915 still uses the legacy pci dma alloc api, so grows an include.
Everything else fairly standard.
v2: Include "drm_legacy.h" in drm.ko source files for consistency.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 10 Sep 2014 10:43:56 +0000 (12:43 +0200)]
drm: Move drm_memory.c map support declarations to <drm/drm_legacy.h>
And replace the drm_core_ prefix with drm_legacy_ since really, this
isn't core stuff.
Also drop drm_core_dropmap since it's unused.
v2: Fix up i810.ko fully which somehow slipped through.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 10 Sep 2014 10:43:55 +0000 (12:43 +0200)]
drm: Purge ioctl forward declarations from drmP.h
If we push down the ioctl table in drm_ioctl.c all the forward
declarations in drmP.h are not required any more.
v2: Fold in fixup from Fenugguang Wu to declare functions as static.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 10 Sep 2014 10:43:54 +0000 (12:43 +0200)]
drm: unexport drm_global_mutex
Drivers really, really have no business even looking at this lock. And
thankfully they don't.
So unexport it and move the declaration to drm_internal.h.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 10 Sep 2014 10:43:53 +0000 (12:43 +0200)]
drm: Move piles of functions from drmP.h to drm_internal.h
This way drivers can't grow crazy ideas any more, and it also
helps a bit in reviewing EXPORT_SYMBOLS.
v2: Even more stuff. Unfortunately we can't move drm_vm_open_locked
because exynos does some horrible stuff with it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 10 Sep 2014 06:16:10 +0000 (08:16 +0200)]
drm: Move vblank related module options into drm_irq.c
This allows us to drop 2 header declarations from drmP.h. The 3rd one
is also used in drm_ioctl.c, so for that create a new drm_internal.h
header for non-legacy non-kms (since we have internal headers for
those parts already) declarations private to drm.ko.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 10 Sep 2014 10:43:52 +0000 (12:43 +0200)]
drm: Drop drm_sysfs_class from drmP.h
No user at all.
My guess is that this is a leftover from ttm before it used
the more abstract helpers to register/unregister its sysfs
objects (see drm_sysfs.h). At least in the existing history
it was never used.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 10 Sep 2014 10:43:51 +0000 (12:43 +0200)]
drm: Move __drm_pci_free to drm_legacy.h
Also sprinkle the customary legacy_ prefix.
Unfortunately we can't move the other functions since i915 is still
using them. Shame on me for that one :(
v2: Fix patch subject as spotted by David Herrmann.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 10 Sep 2014 10:43:49 +0000 (12:43 +0200)]
drm: Create drm legacy driver header
And move a few legayc functions to start things over there.
It compiles ...
Inspired by a patch from Dave Airlie, but with a split between drm.ko
private legacy functions and stuff used by drivers.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 10 Sep 2014 10:43:48 +0000 (12:43 +0200)]
drm: Move drm_legacy_vma_flush into drm_legacy.h
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Thu, 11 Sep 2014 05:42:43 +0000 (07:42 +0200)]
drm: Move sg functions into drm_legacy.h
Also sprinkle the drm_legacy_ prefix where missing.
v2: Drop extern from function declarations and include "drm_legacy.h"
in drm_scatter.c, spotted by David.
Cc: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 11 Sep 2014 05:41:51 +0000 (07:41 +0200)]
drm: Move dma functions into drm_legacy.h
Also drop the unneeded EXPORT_SYMBOL and sprinkle drm_legacy_ prefixes
where missing.
v2: Drop the confusing _core_ and drop extern, both suggested by
David.
Cc: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Fri, 12 Sep 2014 09:04:53 +0000 (19:04 +1000)]
Merge tag 'topic/vblank-rework-2014-09-12' of git://anongit.freedesktop.org/drm-intel into drm-next
So updated vblank-rework pull request, now with the polish that Mario
requested applied (and reviewed by him). Also with backmerge like you've
requested for easier merging.
The neat thing this finally allows is to immediately disable the vblank
interrupt on the last drm_vblank_put if the hardware has perfectly
accurate vblank counter and timestamp readout support. On i915 that
required piles of small adjustements from Ville since depending upon the
platform and port the vblank happens at different scanout lines.
Of course this is fully opt-in and per-device (we need that since gen2
doesn't have a hw vblank counter).
* tag 'topic/vblank-rework-2014-09-12' of git://anongit.freedesktop.org/drm-intel: (22 commits)
drm: Clarify vblank ts/scanoutpos sampling #defines
drm: Simplify return value of drm_get_last_vbltimestamp
drm: Only update final vblank count when precise ts is available
drm: Really never disable vblank irqs for offdelay==0
drm: Use vblank_disable_and_save in drm_vblank_cleanup()
drm: Remove drm_vblank_cleanup from drm_vblank_init error path.
drm: Store the vblank timestamp when adjusting the counter during disable
drm: Fix confusing debug message in drm_update_vblank_count()
drm/i915: Update scanline_offset only for active crtcs
drm: Kick start vblank interrupts at drm_vblank_on()
drm/i915: Opt out of vblank disable timer on >gen2
drm: Add dev->vblank_disable_immediate flag
drm: Disable vblank interrupt immediately when drm_vblank_offdelay<0
drm: Fix race between drm_vblank_off() and drm_queue_vblank_event()
drm: Fix deadlock between event_lock and vbl_lock/vblank_time_lock
drm: Reduce the amount of dev->vblank[crtc] in the code
drm: Avoid random vblank counter jumps if the hardware counter has been reset
drm: Have the vblank counter account for the time between vblank irq disable and drm_vblank_off()
drm: Move drm_update_vblank_count()
drm: Don't clear vblank timestamps when vblank interrupt is disabled
...
Dave Airlie [Fri, 12 Sep 2014 04:32:40 +0000 (14:32 +1000)]
drm/ast: switch to using CACHED by default for sysram
This fixes problems on ppc64 platforms, where we could end up using
a WC mapping for migrating BOs with memcpy, when really we want to
use cached memory.
Tested-by: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 10 Sep 2014 08:23:07 +0000 (18:23 +1000)]
drm: split ati_pcigart.h out of drmP.h
Just move this into a separate header file, and make the
two users use it.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 12 Sep 2014 03:58:27 +0000 (13:58 +1000)]
Merge branch 'drm-next-3.18' of git://people.freedesktop.org/~agd5f/linux into drm-next
concurrent buffer reads.
* 'drm-next-3.18' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: allow concurrent buffer reads
drm/radeon: add the infrastructure for concurrent buffer access
drm/ttm: allow fence to be added as shared
Josh Boyer [Fri, 5 Sep 2014 17:19:59 +0000 (13:19 -0400)]
drm/vmwgfx: Fix drm.h include
The userspace drm.h include doesn't prefix the drm directory. This can lead
to compile failures as /usr/include/drm/ isn't in the standard gcc include
paths. Fix it to be <drm/drm.h>, which matches the rest of the driver drm
header files that get installed into /usr/include/drm.
Red Hat Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=
1138759
Fixes:
1d7a5cbf8f74e
Reported-by: Jeffrey Bastian <jbastian@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Christian König [Thu, 4 Sep 2014 18:01:54 +0000 (20:01 +0200)]
drm/radeon: allow concurrent buffer reads
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 4 Sep 2014 18:01:53 +0000 (20:01 +0200)]
drm/radeon: add the infrastructure for concurrent buffer access
This allows us to specify if we want to sync to
the shared fences of a reservation object or not.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 4 Sep 2014 18:01:52 +0000 (20:01 +0200)]
drm/ttm: allow fence to be added as shared
This patch adds a new flag to the ttm_validate_buffer list to
add the fence as shared to the reservation object.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Vetter [Thu, 11 Sep 2014 12:46:53 +0000 (14:46 +0200)]
Merge remote-tracking branch 'airlied/drm-next' into topic/vblank-rework
Dave asked me to do the backmerge before sending him the revised pull
request, so here we go. Nothing fancy in the conflicts, just a few
things changed right next to each another.
Conflicts:
drivers/gpu/drm/drm_irq.c
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Wed, 10 Sep 2014 15:36:11 +0000 (17:36 +0200)]
drm: Clarify vblank ts/scanoutpos sampling #defines
I've read INVBL as "invalid backlight" and got mightly confused.
The #defines are already fairly long and we can afford to extend
them a bit more without resulting in ugly code all over.
I'm not sure how useful the complicated bitmask return value of these
functions really are since no one checks them. But for now let's keep
things as is.
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 10 Sep 2014 15:36:10 +0000 (17:36 +0200)]
drm: Simplify return value of drm_get_last_vbltimestamp
Imo u32 hints at a register value, but in reality all callers only
care whether the sampled timestamp is precise or not. So give them
just a bool.
Also move the declaration out of drmP.h, it's only used in drm_irq.c.
v2: Also drop the EXPORT_SYMBOL, spotted by Mario.
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Wed, 10 Sep 2014 15:36:09 +0000 (17:36 +0200)]
drm: Only update final vblank count when precise ts is available
Drivers without a hardware vblank counter simply can't account for the
vblanks that happened while the vblank interrupt was off. To check
this grab a vblank timestamp and if the result is dubious follow the
normal save-and-disable logic.
Drivers should prevent this by setting vblank_disable_allowed = false,
but since running vblank interrupts constantly is not good for power
consumption most drivers lie. Testing for precise vblank timestamps is
the next best thing we can check for.
Suggested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Wed, 10 Sep 2014 15:36:08 +0000 (17:36 +0200)]
drm: Really never disable vblank irqs for offdelay==0
With the new support for immediate vblank disabling we always disabled
the vblank interrupt right away, irrespective of the vblank offdelay
setting.
But being able to let vblanks run forever is fairly useful for
debugging, so restore that behaviour.
Suggested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Dave Airlie [Thu, 11 Sep 2014 10:53:57 +0000 (20:53 +1000)]
Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into drm-next
1) add LVDS support for mdp4 (tested with auo B101XTN01.0 panel)
2) add B101XTN01.0 panel
3) bit of gpu refactoring to prepare for addition of addition gpu
generations beyond just a3xx
* 'msm-next' of git://people.freedesktop.org/~robclark/linux:
drm/msm/adreno: push dump/show stuff to base class
drm/msm/adreno: bit of init refactoring
drm/msm/adreno: move decision about what gpu to to load
drm/msm/adreno: split adreno device out into it's own file
drm/panel/simple: add optronics B101XTN01.0 (v3)
drm/msm/mdp4: add LVDS panel support
drm/msm/mdp4: fix blend setup with multiple crtcs
drm/msm: update generated headers
Dave Airlie [Thu, 11 Sep 2014 09:58:32 +0000 (19:58 +1000)]
Merge branch 'drm-next-3.18' of git://people.freedesktop.org/~agd5f/linux into drm-next
A few more radeon patches for 3.18. This patch set gives us more
flexibility with respect to buffer placement in vram with respect
to CPU access. E.g., if you know you will not need CPU access, we can
now pin outside of the CPU window, reducing contention for the
CPU window space.
* 'drm-next-3.18' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: add RADEON_GEM_NO_CPU_ACCESS BO creation flag (v4)
drm/radeon: Clean up assignment of TTM placement lpfn member for pinning
drm/radeon: Add RADEON_GEM_CPU_ACCESS BO creation flag
Alex Deucher [Thu, 28 Aug 2014 14:59:05 +0000 (10:59 -0400)]
drm/radeon: add RADEON_GEM_NO_CPU_ACCESS BO creation flag (v4)
Allows pinning of buffers in the non-CPU visible portion of
vram.
v2: incorporate Michel's comments.
v3: rebase on Michel's patch
v4: rebase on Michel's v2 patch
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Michel Dänzer [Tue, 9 Sep 2014 01:09:23 +0000 (10:09 +0900)]
drm/radeon: Clean up assignment of TTM placement lpfn member for pinning
This sets the lpfn member to 0 instead of the full domain size. TTM uses
the full domain size when lpfn is 0.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michel Dänzer [Thu, 28 Aug 2014 06:56:00 +0000 (15:56 +0900)]
drm/radeon: Add RADEON_GEM_CPU_ACCESS BO creation flag
This flag is a hint that userspace expects the BO to be accessed by the
CPU. We can use that hint to prevent such BOs from ever being stored in
the CPU inaccessible part of VRAM.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rob Clark [Fri, 5 Sep 2014 19:05:38 +0000 (15:05 -0400)]
drm/msm/adreno: push dump/show stuff to base class
Add ptr to list of interesting registers to 'struct adreno_gpu' and use
that to move most of the debugfs show and register dump bits down into
adreno_gpu. This will avoid duplication as support for additional
adreno generations is added.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Fri, 5 Sep 2014 19:03:40 +0000 (15:03 -0400)]
drm/msm/adreno: bit of init refactoring
Push a few bits down into adreno_gpu so they won't have to be duplicated
as support for additional adreno generations is added.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Fri, 5 Sep 2014 17:30:27 +0000 (13:30 -0400)]
drm/msm/adreno: move decision about what gpu to to load
Move this into into adreno_device, and decide based on gpu revision
rather than just assuming a3xx.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Fri, 5 Sep 2014 17:06:37 +0000 (13:06 -0400)]
drm/msm/adreno: split adreno device out into it's own file
We'd rather not duplicate these parts as support for additional gpu
generations is added.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Fri, 1 Aug 2014 21:01:06 +0000 (17:01 -0400)]
drm/panel/simple: add optronics B101XTN01.0 (v3)
LVDS panel, make/model described as:
AU Optronics Corporation - B101XTN01.0 (H/W:0A)
See:
http://www.encore-electronic.com/media/B101XTN01.0.pdf
Tested with panel attached to an Inforce IFC6410 board.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Fri, 1 Aug 2014 17:08:11 +0000 (13:08 -0400)]
drm/msm/mdp4: add LVDS panel support
LVDS panel support uses the LCDC (parallel) encoder. Unlike with HDMI,
there is not a separate LVDS block, so no need to split things into a
bridge+connector. Nor is there is anything re-used with mdp5.
Note that there can be some regulators shared between HDMI and LVDS (in
particular, on apq8064, ext_3v3p), so we should not use the _exclusive()
variants of devm_regulator_get().
The drm_panel framework is used for panel-specific driver.
Signed-off-by: Rob Clark <robdclark@gmail.com>