OSDN Git Service
Jes Sorensen [Thu, 5 Mar 2015 19:24:36 +0000 (14:24 -0500)]
staging: rtl8723au: Remove pointless wrappers around odm_TXPowerTrackingInit()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Thu, 5 Mar 2015 19:24:35 +0000 (14:24 -0500)]
staging: rtl8723au: Remove a number of unused entries from struct dm_odm_t
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Thu, 5 Mar 2015 19:24:34 +0000 (14:24 -0500)]
staging: rtl8723au: Remove unused struct rx_hp
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Belisko [Sat, 28 Feb 2015 20:54:42 +0000 (21:54 +0100)]
staging: iio: hmc5843: Set iio name property in sysfs
Without this change file name for hmc5843 is empty in
/sys/bus/iio/devices/iio\:device*/name
With this change name is reported correctly:
cat /sys/bus/iio/devices/iio\:device*/name
hmc5843
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabio Estevam [Tue, 3 Mar 2015 12:55:43 +0000 (09:55 -0300)]
staging: dgap: Avoid name collision
Building for ARM64 leads to the following build warning:
In file included from drivers/staging/dgap/dgap.c:66:0:
drivers/staging/dgap/dgap.h:124:0: warning: "PCI_IO_SIZE" redefined
#define PCI_IO_SIZE 0x00200000
^
In file included from ./arch/arm64/include/asm/page.h:66:0,
from include/linux/mm_types.h:15,
from include/linux/sched.h:27,
from ./arch/arm64/include/asm/compat.h:25,
from ./arch/arm64/include/asm/stat.h:23,
from include/linux/stat.h:5,
from include/linux/module.h:10,
from drivers/staging/dgap/dgap.c:47:
./arch/arm64/include/asm/memory.h:39:0: note: this is the location of the previous definition
#define PCI_IO_SIZE SZ_16M
^
Use PCI_IO_SIZE_DGAP to avoid the name collision.
Reported-by: Olof's autobuilder <build@lixom.net>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martyn Welch [Thu, 26 Feb 2015 15:53:11 +0000 (18:53 +0300)]
vme: tsi148: Master windows support USERx and CR/CSR accesses, not slaves
The tsi148 driver is registering the slave images as supporting the "USER"
access modes and CR/CSR access mode rather than the master images as it
should.
Remove the incorrect case entries for these modes from the
tsi148_slave_set() function, stop registering slave_images as supporting
these modes and instead register master windows as supporting these modes.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Acked-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Kalinkin [Thu, 26 Feb 2015 15:53:10 +0000 (18:53 +0300)]
staging: vme: mmap() support for vme_user
We also make sure that user won't be able to reconfigure the window while it is
mmap'ed.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Martyn Welch <martyn.welch@ge.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Kalinkin [Thu, 26 Feb 2015 15:53:09 +0000 (18:53 +0300)]
staging: vme: use image mutex for ioctl()
This implements more granular locking in vme_user_ioctl() by using separate
locks for each devfs device.
This also provides a synchronization between vme_user_read(), vme_user_write()
and vme_user_ioctl().
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Martyn Welch <martyn.welch@ge.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matteo Semenzato [Wed, 4 Mar 2015 18:53:10 +0000 (19:53 +0100)]
Staging: rtl8192e: remove assignment of function parameter
This patch removes the assignment of a function parameter that has no
effect.
Signed-off-by: Matteo Semenzato <mattew8898@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Lambert [Thu, 5 Mar 2015 13:12:15 +0000 (14:12 +0100)]
staging: rtl8192e: Remove unnecessary OOM message
This patch reduces the kernel size by removing error messages that duplicate
the normal OOM message.
A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr)
@@
identifier f,print,l;
expression e;
constant char[] c;
@@
e = \(kzalloc\|kmalloc\|devm_kzalloc\|devm_kmalloc\)(...);
if (e == NULL) {
<+...
- print(...,c,...);
... when any
(
goto l;
|
return ...;
)
...+> }
Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Perches [Sun, 22 Feb 2015 02:53:45 +0000 (18:53 -0800)]
staging: rtl8192x: Remove use of seq_printf return value
The seq_printf return value, because it's frequently misused,
will eventually be converted to void.
See: commit
1f33c41c03da ("seq_file: Rename seq_overflow() to
seq_has_overflowed() and make public")
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tolga Ceylan [Sat, 21 Feb 2015 02:14:24 +0000 (18:14 -0800)]
Staging: rtl8192u: ieee80211: dot11d: added parenthesis to RESET_CIE_WATCHDOG macro
Added parenthesis to RESET_CIE_WATCHDOG macro to resolve checkpatch
error.
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tolga Ceylan [Fri, 20 Feb 2015 05:54:10 +0000 (21:54 -0800)]
Staging: rtl9182u: r819xU_firmware: Replaced C99 comments with C89
Replaced C99 comments with C89.
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tolga Ceylan [Fri, 20 Feb 2015 05:54:09 +0000 (21:54 -0800)]
Staging: rtl8192u: r819xU_firmware: removed commented out assert
Removed an assert that was commented out. The comment provides
no documentation value as rt_status is properly handled.
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tolga Ceylan [Fri, 20 Feb 2015 05:54:08 +0000 (21:54 -0800)]
Staging: rtl8192u: r819xU_firmware: removed commented out variable
Removed commented out variable
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rickard Strandqvist [Sat, 7 Feb 2015 14:56:10 +0000 (15:56 +0100)]
staging: rtl8192u: r8192U_core: Fix driver_info dereference as a null pointer
Fix possible use of use of driver_info as a null pointer in
query_rxdesc_status()
This could happen if stats->RxIs40MHzPacket still has the
default value of zero.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Wed, 4 Mar 2015 17:14:26 +0000 (12:14 -0500)]
staging: unisys: remove LOGWRN() macros and uniklog.h
Remove the last set of macros from uniklog.h. Without LOGWRN() and
friends, uniklog.h is empty so we can delete the file itself as well.
This macro was not used a lot but the file was included in many places.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Wed, 4 Mar 2015 17:14:25 +0000 (12:14 -0500)]
staging: unisys: remove ERRDEV macros
Remove the LOGERR, LOGERRDEV, LOGERRDEVX, LOGERRNAME, LOGORDUMPERR
macros from all the drivers.
In one case the removal of the ERRDRV() changed things such that a macro which
returned a value was needed, but the return value was no longer being used. In
this case the macro was replaced with the contents of the macro, but with the
truth calculation removed so that it would not generate a warning.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Wed, 4 Mar 2015 17:14:24 +0000 (12:14 -0500)]
staging: unisys: remove LOGVER macro
Remove the LOGVER macro from the drivers entirely.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Wed, 4 Mar 2015 17:14:23 +0000 (12:14 -0500)]
staging: unisys: remove ASSERT() macro
Remove the ASSERT macro from timskmod.h, and replace its single use with
WARN_ON() instead.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Wed, 4 Mar 2015 17:14:22 +0000 (12:14 -0500)]
staging: unisys: remove LOGINF macros
Remove the LOGINF, LOGINFDEV, LOGINFDEVX, LOGINFNAME, PRINTKDRV, and
INFODRV macros entirely from the driver set.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Wed, 4 Mar 2015 17:14:21 +0000 (12:14 -0500)]
staging: unisys: remove DBGINF, DBGVER, DEBUGDEV, and DEBUGDRV macros
The messages put out by these macros are for driver debugging and aren't needed
any more, so just remove all use of them, and the macros too.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drew Fustini [Wed, 4 Mar 2015 08:10:11 +0000 (02:10 -0600)]
Staging: fbtft: add header for internal functions
Remove extern keyword from function prototypes to suppress warning from
checkpatch.pl with --strict option: https://lkml.org/lkml/2013/7/23/422
fbtft maintainer Noralf Tronnes advised these functions are internal to
this module & suggested moving these prototypes to new internal.h file.
He also advised fbtft.h file will eventually live in include/linux/fbtft.h
Suggested-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Drew Fustini <pdp7pdp7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Tue, 3 Mar 2015 10:51:07 +0000 (16:21 +0530)]
MAINTAINERS: update for sm750fb driver
add myself and Teddy Wang as the Maintainer of the sm750
frame buffer driver.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Tue, 3 Mar 2015 10:51:06 +0000 (16:21 +0530)]
staging: sm750fb: add sm750 to staging
sm750 of Silicon Motion is pci-e display controller device and has
features like dual display and 2D acceleration. This patch adds the
driver to staging.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Tue, 10 Feb 2015 12:08:40 +0000 (17:38 +0530)]
staging: sm7xxfb: make vgamode static
the variable vgamode is used only in this file and hence can be
safely made as static.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Perches [Sun, 22 Feb 2015 02:53:44 +0000 (18:53 -0800)]
staging: i2o: Remove use of seq_printf return value
The seq_printf return value, because it's frequently misused,
will eventually be converted to void.
See: commit
1f33c41c03da ("seq_file: Rename seq_overflow() to
seq_has_overflowed() and make public")
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yannick Guerrini [Thu, 26 Feb 2015 16:36:33 +0000 (17:36 +0100)]
staging: rtl8188eu: Fix trivial typos in comments
Change 'disabed' and 'disabel' to 'disabled'
Change 'inviation' to 'invitation'
Change 'negoitation' to 'negotiation'
Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Wed, 11 Feb 2015 11:27:08 +0000 (16:57 +0530)]
staging: panel: initialize lcd if lcd enabled
initialiaze lcd parameters only if lcd is enabled.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Tue, 10 Feb 2015 11:56:02 +0000 (17:26 +0530)]
staging: panel: register driver after checking device
register the driver only if lcd or keypad has been enabled and if
both are disabled then just exit.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matteo Semenzato [Sat, 28 Feb 2015 14:28:15 +0000 (15:28 +0100)]
Staging: vt6655: fix C99 comments
This patch fixes the following warning:
do not use C99 // comments
Signed-off-by: Matteo Semenzato <mattew8898@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex W Slater [Thu, 26 Feb 2015 20:09:26 +0000 (20:09 +0000)]
staging: vt6655: Cleanup C99 comments
Fix checkpatch.pl errors:
"ERROR: do not use C99 // comments"
Signed-off-by: Alex W Slater <alex.slater.dev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matt [Sat, 21 Feb 2015 09:40:02 +0000 (10:40 +0100)]
Staging: vt6655 fix C99 style comments
Signed-off-by: Matteo Semenzato <mattew8898@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Stankovic [Thu, 12 Feb 2015 21:08:26 +0000 (22:08 +0100)]
staging: vt6655: fix coding style issues in channel.c
Observe the line length limit to make checkpatch.pl happy.
Signed-off-by: Ivan Stankovic <pokemon@fly.srk.fer.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Engelmayer [Wed, 11 Feb 2015 19:33:15 +0000 (20:33 +0100)]
staging: vt6656: Fix possible leak in vnt_download_firmware()
When failing to allocate buffer memory, function vnt_download_firmware() goes
through the wrong exit path and fails to release the already requested
firmware. Thus use the correct cleanup. Detected by Coverity CID
1269128.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Reviewed-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Lambert [Tue, 10 Feb 2015 10:42:08 +0000 (11:42 +0100)]
staging: ozwpan: Move code from success handling to error handling
The original version was success handling rather than error handling,
therefore this patch reduces nesting.
Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Lambert [Tue, 10 Feb 2015 09:24:12 +0000 (10:24 +0100)]
staging: ozwpan: Remove allocation from delaration line
This patch removes allocation from declaration line because
people are known to gloss over declarations.
Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Salah Triki [Thu, 5 Mar 2015 02:50:24 +0000 (03:50 +0100)]
Staging: dgnc: Fix checking return value of register_chrdev
The failure code is negative. So check <0 instead of <=0.
Return the failure code instead of -ENXIO.
Signed-off-by: Salah Triki <salah.triki@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Salah Triki [Sun, 1 Mar 2015 22:18:50 +0000 (23:18 +0100)]
staging: dgnc: fix braces {} are not necessary for single statement blocks
This patch fixes the following checkpatch.pl warning:
braces {} are not necessary for single statement blocks
Signed-off-by: Salah Triki <salah.triki@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthew Tyler [Fri, 6 Mar 2015 10:09:27 +0000 (18:09 +0800)]
staging:lustre:libcfs: Merge linux-proc.c into module.c
module.c was previously the sole exporter of symbols from linux-proc.c
This patch removes the global symbols by merging the two files
Signed-off-by: Matthew Tyler <matt.tyler@flashics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alberto Pires de Oliveira Neto [Tue, 3 Mar 2015 00:09:48 +0000 (21:09 -0300)]
staging: lustre: space prohibited between function name and open parenthesis '('
This patch fixes checkpatch.pl warning.
WARNING: space prohibited between function name and open parenthesis '('
Signed-off-by: Alberto Pires de Oliveira Neto <mrpenguin2005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Mon, 2 Mar 2015 06:01:47 +0000 (01:01 -0500)]
staging/lustre/libcfs: replace deprecated cpus_ calls with cpumask_
Rusty Russel advises that cpus_* functions are deprecated to work
on cpumasks and cpumask_* functions should be called instead,
otherwise problems with CPUMASK_OFFSTACK arise.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Mon, 2 Mar 2015 06:01:46 +0000 (01:01 -0500)]
staging/lustre/ptlrpc: Do not use deprecated cpus_* functions
As per Rusty Russel, cpus_* functions are deprecated.
When mixing cpumask_copy with cpus_weight, they operate on different
sized masks if CPUMASK_OFFSTACK is enabled, causing an
immediate assertion failure.
Copying of cpumasks by assignment is also not allowed now.
Additionally, in ptlrpc/service.c avoid the cpumask copies,
since we only use it to check how many siblings are there for
core #0 and nothing else.
Reported-by: Tyson Whitehead <twhitehead@gmail.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Mar 2015 20:21:18 +0000 (13:21 -0700)]
staging: comedi: drivers/*.c: add missing braces {} to if/else branches
According to the CodingStyle, braces should be used on all branches
if thet are used on any branch,
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Mar 2015 20:21:17 +0000 (13:21 -0700)]
staging: comedi: drivers/*.c: remove unnecessary blank lines
Blank lines are not needed before a close brace '}' or after an
open brace '{'. Also remove any multiple blank lines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Mar 2015 20:21:16 +0000 (13:21 -0700)]
staging: comedi: drivers/*.c: alignment should match open parenthesis
Fix the alignment issues in all the comedi drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 5 Mar 2015 20:21:15 +0000 (13:21 -0700)]
staging: comedi: drivers/*.c: fix common misspellings
Fix these common misspellings:
s/dependancy/dependency
s/occured/occurred
s/informations/information
s/intialize/initialize
s/serveral/several
s/interrups/interrupts
s/acknowledgement/acknowledgment
s/suppport/support
s/writting/writing
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 4 Mar 2015 19:15:42 +0000 (12:15 -0700)]
staging: comedi: s626: remove unnecessary 'cmd' pointer checks
The local variable 'cmd' is a pointer to the address of a member variable
of a struct. It will always be valid. Remove the unnecessary checks.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 4 Mar 2015 19:15:41 +0000 (12:15 -0700)]
staging: comedi: kcomedilib_main: (!foo) preferred over (foo == NULL)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 4 Mar 2015 19:15:40 +0000 (12:15 -0700)]
staging: comedi: ni_mio_common: (!foo) preferred over (foo == NULL)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 4 Mar 2015 19:15:39 +0000 (12:15 -0700)]
staging: comedi: ni_tiocmd: (!foo) preferred over (foo == NULL)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 4 Mar 2015 19:15:38 +0000 (12:15 -0700)]
staging: comedi: ni_pcimio: (!foo) preferred over (foo == NULL)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 4 Mar 2015 19:15:37 +0000 (12:15 -0700)]
staging: comedi: ni_pcidio: (!foo) preferred over (foo == NULL)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 4 Mar 2015 19:15:36 +0000 (12:15 -0700)]
staging: comedi: ni_labpc_common: (!foo) preferred over (foo == NULL)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 4 Mar 2015 19:15:35 +0000 (12:15 -0700)]
staging: comedi: ni_atmio: (!foo) preferred over (foo == NULL)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 4 Mar 2015 19:15:34 +0000 (12:15 -0700)]
staging: comedi: ni_660x: (!foo) preferred over (foo == NULL)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 4 Mar 2015 19:15:33 +0000 (12:15 -0700)]
staging: comedi: mite: (!foo) preferred over (foo == NULL)
Also, clarify the 'ring' allocation failure by returning NULL instead
of 'ring' (which would be NULL).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 4 Mar 2015 19:15:32 +0000 (12:15 -0700)]
staging: comedi: cb_pcidas64: (!foo) preferred over (foo == NULL)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 4 Mar 2015 19:15:31 +0000 (12:15 -0700)]
staging: comedi: amplc_pci230: (!foo) preferred over (foo == NULL)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 4 Mar 2015 19:15:30 +0000 (12:15 -0700)]
staging: comedi: amplc_pci224: (!foo) preferred over (foo == NULL)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 4 Mar 2015 19:15:29 +0000 (12:15 -0700)]
staging: comedi: drivers: (!foo) preferred over (foo == NULL)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 4 Mar 2015 19:15:28 +0000 (12:15 -0700)]
staging: comedi: comedi_fops: (!foo) preferred over (foo == NULL)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Fri, 6 Mar 2015 19:07:13 +0000 (22:07 +0300)]
Staging: ste_rmi4: clean dev_err logging
This patch removes __func__ from dev_err. dev_err includes information about:
(devcice, driver, specific instance of device, etc) in the log printout.
This was done using Coccinelle, with the following semantic patch:
@a@
expression E, R;
expression msg;
@@
dev_err(E, msg, __func__, R);
@script:python b@
e << a.msg;
y;
@@
if(e.find("%s: ") == True):
m = e.replace("%s: ", "", 1);
coccinelle.y = m;
elif(e.find("%s ") == True):
m = e.replace("%s ", "", 1);
coccinelle.y = m;
elif(e.find("%s:") == True):
m = e.replace("%s:", "", 1);
coccinelle.y = m;
else:
m = e.replace("%s", "",1);
coccinelle.y = m;
@c@
expression a.E, a.msg, a.R;
identifier b.y;
@@
- dev_err(E, msg, __func__, R);
+ dev_err(E, y, R);
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Fri, 6 Mar 2015 19:05:05 +0000 (22:05 +0300)]
Staging: slicoss: clean dev_err logging
This patch removes __func__ from dev_err. dev_err includes information about:
(devcice, driver, specific instance of device, etc) in the log printout.
This was done using Coccinelle, with the following semantic patch:
@a@
expression E, R;
expression msg;
@@
dev_err(E, msg, __func__, R);
@script:python b@
e << a.msg;
y;
@@
if(e.find("%s: ") == True):
m = e.replace("%s: ", "", 1);
coccinelle.y = m;
elif(e.find("%s ") == True):
m = e.replace("%s ", "", 1);
coccinelle.y = m;
elif(e.find("%s:") == True):
m = e.replace("%s:", "", 1);
coccinelle.y = m;
else:
m = e.replace("%s", "",1);
coccinelle.y = m;
@c@
expression a.E, a.msg, a.R;
identifier b.y;
@@
- dev_err(E, msg, __func__, R);
+ dev_err(E, y, R);
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Fri, 6 Mar 2015 19:03:53 +0000 (22:03 +0300)]
Staging: iio: clean dev_err logging
This patch removes __func__ from dev_err. dev_err includes information about:
(devcice, driver, specific instance of device, etc) in the log printout.
This was done using Coccinelle, with the following semantic patch:
@a@
expression E, R;
expression msg;
@@
dev_err(E, msg, __func__, R);
@script:python b@
e << a.msg;
y;
@@
if(e.find("%s: ") == True):
m = e.replace("%s: ", "", 1);
coccinelle.y = m;
elif(e.find("%s ") == True):
m = e.replace("%s ", "", 1);
coccinelle.y = m;
elif(e.find("%s:") == True):
m = e.replace("%s:", "", 1);
coccinelle.y = m;
else:
m = e.replace("%s", "",1);
coccinelle.y = m;
@c@
expression a.E, a.msg, a.R;
identifier b.y;
@@
- dev_err(E, msg, __func__, R);
+ dev_err(E, y, R);
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Fri, 6 Mar 2015 19:03:05 +0000 (22:03 +0300)]
Staging: rts5208: clean dev_err logging
This patch removes __func__ from dev_err. dev_err includes information about:
(devcice, driver, specific instance of device, etc) in the log printout.
This was done using Coccinelle, with the following semantic patch:
@a@
expression E, R;
expression msg;
@@
dev_err(E, msg, __func__, R);
@script:python b@
e << a.msg;
y;
@@
if(e.find("%s: ") == True):
m = e.replace("%s: ", "", 1);
coccinelle.y = m;
elif(e.find("%s ") == True):
m = e.replace("%s ", "", 1);
coccinelle.y = m;
elif(e.find("%s:") == True):
m = e.replace("%s:", "", 1);
coccinelle.y = m;
else:
m = e.replace("%s", "",1);
coccinelle.y = m;
@c@
expression a.E, a.msg, a.R;
identifier b.y;
@@
- dev_err(E, msg, __func__, R);
+ dev_err(E, y, R);
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Fri, 6 Mar 2015 19:01:38 +0000 (22:01 +0300)]
Staging: comedi: clean dev_err logging
This patch removes __func__ from dev_err. dev_err includes information about:
(devcice, driver, specific instance of device, etc) in the log printout.
This was done using Coccinelle, with the following semantic patch:
@a@
expression E, R;
expression msg;
@@
dev_err(E, msg, __func__, R);
@script:python b@
e << a.msg;
y;
@@
if(e.find("%s: ") == True):
m = e.replace("%s: ", "", 1);
coccinelle.y = m;
elif(e.find("%s ") == True):
m = e.replace("%s ", "", 1);
coccinelle.y = m;
elif(e.find("%s:") == True):
m = e.replace("%s:", "", 1);
coccinelle.y = m;
else:
m = e.replace("%s", "",1);
coccinelle.y = m;
@c@
expression a.E, a.msg, a.R;
identifier b.y;
@@
- dev_err(E, msg, __func__, R);
+ dev_err(E, y, R);
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Fri, 6 Mar 2015 19:00:42 +0000 (22:00 +0300)]
Staging: gdm72xx: clean dev_err logging
This patch removes __func__ from dev_err. dev_err includes information about:
(devcice, driver, specific instance of device, etc) in the log printout.
This was done using Coccinelle, with the following semantic patch:
@a@
expression E, R;
expression msg;
@@
dev_err(E, msg, __func__, R);
@script:python b@
e << a.msg;
y;
@@
if(e.find("%s: ") == True):
m = e.replace("%s: ", "", 1);
coccinelle.y = m;
elif(e.find("%s ") == True):
m = e.replace("%s ", "", 1);
coccinelle.y = m;
elif(e.find("%s:") == True):
m = e.replace("%s:", "", 1);
coccinelle.y = m;
else:
m = e.replace("%s", "",1);
coccinelle.y = m;
@c@
expression a.E, a.msg, a.R;
identifier b.y;
@@
- dev_err(E, msg, __func__, R);
+ dev_err(E, y, R);
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Fri, 6 Mar 2015 19:00:10 +0000 (22:00 +0300)]
Staging: media: clean dev_err logging
This patch removes __func__ from dev_err. dev_err includes information about:
(devcice, driver, specific instance of device, etc) in the log printout.
This was done using Coccinelle, with the following semantic patch:
@a@
expression E, R;
expression msg;
@@
dev_err(E, msg, __func__, R);
@script:python b@
e << a.msg;
y;
@@
if(e.find("%s: ") == True):
m = e.replace("%s: ", "", 1);
coccinelle.y = m;
elif(e.find("%s ") == True):
m = e.replace("%s ", "", 1);
coccinelle.y = m;
elif(e.find("%s:") == True):
m = e.replace("%s:", "", 1);
coccinelle.y = m;
else:
m = e.replace("%s", "",1);
coccinelle.y = m;
@c@
expression a.E, a.msg, a.R;
identifier b.y;
@@
- dev_err(E, msg, __func__, R);
+ dev_err(E, y, R);
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Fri, 6 Mar 2015 18:59:04 +0000 (21:59 +0300)]
Staging: fbtft: clean dev_err() logging
This patch removes __func__ from dev_err. dev_err includes information about:
(devcice, driver, specific instance of device, etc) in the log printout.
This was done using Coccinelle, with the following semantic patch:
@a@
expression E, R;
expression msg;
@@
dev_err(E, msg, __func__, R);
@script:python b@
e << a.msg;
y;
@@
if(e.find("%s: ") == True):
m = e.replace("%s: ", "", 1);
coccinelle.y = m;
elif(e.find("%s ") == True):
m = e.replace("%s ", "", 1);
coccinelle.y = m;
elif(e.find("%s:") == True):
m = e.replace("%s:", "", 1);
coccinelle.y = m;
else:
m = e.replace("%s", "",1);
coccinelle.y = m;
@c@
expression a.E, a.msg, a.R;
identifier b.y;
@@
- dev_err(E, msg, __func__, R);
+ dev_err(E, y, R);
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Fri, 6 Mar 2015 17:01:07 +0000 (20:01 +0300)]
Staging: media: Replace dev_err with pr_err to avoid null pointer derefrence
This patch replace dev_err with pr_err, for pointer is derefrenced after comparing it to NULL.
This was found using the following coccinelle script:
@disable is_null@
identifier f;
expression E;
identifier fld;
statement S;
@@
+ if(E == NULL) S
f(...,E->fld,...);
-if(E == NULL) S;
@@
identifier f;
expression E;
identifier fld;
statement S;
@@
+ if(!E) S
f(...,E->fld,...);
-if(!E) S;
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Thu, 5 Mar 2015 10:01:49 +0000 (13:01 +0300)]
Staging: comedi: Clean dev_err() logging
This patch removes __func__ from dev_err. dev_err includes information about:
(devcice, driver, specific instance of device, etc) in the log printout, so there is no need for __func__.
This was done using Coccinelle, with the following semantic patch:
@a@
expression E;
expression msg;
@@
dev_err(E, msg, __func__);
@script:python b@
e << a.msg;
y;
@@
if(e.find("%s: ") == True):
m = e.replace("%s: ", "");
coccinelle.y = m;
elif(e.find("%s ") == True):
m = e.replace("%s ", "");
coccinelle.y = m;
else:
m = e.replace("%s", "");
@c@
expression a.E, a.msg;
identifier b.y;
@@
- dev_err(E, msg, __func__);
+ dev_err(E, y);
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ksenija Stanojevic [Wed, 4 Mar 2015 23:51:46 +0000 (00:51 +0100)]
Staging: rtl8192u: Replace TRUE with true
This patch replaces TRUE by true, since Linux kernel has already a
boolean type, bool, defined in linux/stddef.h
Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yeliz Taneroglu [Wed, 4 Mar 2015 21:15:16 +0000 (23:15 +0200)]
Staging: rtl8723au: Fixed error 'else should follow close brace '}".
This patch fixes error 'else should follow close brace '}"
found by checkpatch in driver rtl8723au.
Signed-off-by: Yeliz Taneroglu <yeliztaneroglu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yeliz Taneroglu [Wed, 4 Mar 2015 19:32:49 +0000 (21:32 +0200)]
Staging: unisys: Remove unnecessary semicolon
This fixes the checkpatch.pl warning:
WARNING: macros should not use a trailing semicolon.
Signed-off-by: Yeliz Taneroglu <yeliztaneroglu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cristina Opriceana [Wed, 4 Mar 2015 10:37:28 +0000 (12:37 +0200)]
Staging: drivers: Bool initializations should use true/false
This patch replaces bool initializations of 1/0 with true/false in order
to increase readability and respect the standards. Warning found by
coccinelle.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Navya Sri Nizamkari [Wed, 4 Mar 2015 08:45:05 +0000 (14:15 +0530)]
staging: rtl8192e: Remove if conditions.
This patch removes if conditions with no exececutable
statements in the bodies of those ifs and also no variable
assignments in the if conditional checks. The call to
rtllib_act_scanning in the condition doesn't have any side
effects as it too performs conditional checks without changing
any values. Hence, it's safe to remove the if condition.
Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Somya Anand [Wed, 4 Mar 2015 08:40:46 +0000 (14:10 +0530)]
Staging: rtl8188eu: Remove unnecessary return statements
This patch removes unnecessary return statement from a void
function.
This issue is identified by checkpatch.pl
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Somya Anand [Wed, 4 Mar 2015 08:40:44 +0000 (14:10 +0530)]
Staging: rtl8188eu: Remove redundant local variable
This patch removes a redundant variable "raid" and adds inline
return statements.
This issue is identified by the following coccinelle script:
@@
expression ret;
identifier f;
@@
-ret =
+return
f(...);
-return ret;
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 07:00:02 +0000 (09:00 +0200)]
staging: rtl8712: replace memset(x,0,ETH_ALEN)
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The aforementioned function replaces
memset. In addition, linux/etherdevice.h was included as a header
since it is the file that defines the inline function eth_zero_addr().
The changes were carried out using the following coccinelle script:
@header@
@@
#include <linux/etherdevice.h>
@eth_zero_addr@
expression e;
@@
-memset(e,0,ETH_ALEN);
+eth_zero_addr(e);
@eth_broadcast_addr@
identifier e;
@@
-memset(e,\(0xff\|0xFF\|255\),ETH_ALEN);
+eth_broadcast_addr(e);
@linux_header depends on !header && (eth_zero_addr || eth_broadcast_addr) @
@@
+ #include <linux/etherdevice.h>
+
@special_header depends on !header && !linux_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
+
@custom_header depends on !header && !linux_header && !special_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 06:56:45 +0000 (08:56 +0200)]
staging: rtl8188eu: replace memset(x,0,ETH_ALEN)
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The aforementioned function replaces
memset. In addition, linux/etherdevice.h was included as a header
since it is the file that define the inline function eth_zero_addr().
The changes were carried out using the following coccinelle script:
@header@
@@
#include <linux/etherdevice.h>
@eth_zero_addr@
expression e;
@@
-memset(e,0,ETH_ALEN);
+eth_zero_addr(e);
@eth_broadcast_addr@
identifier e;
@@
-memset(e,\(0xff\|0xFF\|255\),ETH_ALEN);
+eth_broadcast_addr(e);
@linux_header depends on !header && (eth_zero_addr || eth_broadcast_addr) @
@@
+ #include <linux/etherdevice.h>
+
@special_header depends on !header && !linux_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
+
@custom_header depends on !header && !linux_header && !special_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 06:20:14 +0000 (08:20 +0200)]
staging: unisys: virthba: remove extra parentheses around left bit shift operations
Removes extra parentheses around bitwise left shift operations.
The case handled is when resultant value is assigned to a variable.
The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
<<
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
<<
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
<<
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 06:19:50 +0000 (08:19 +0200)]
staging: slicoss: remove extra parentheses around left bit shift operations
Removes extra parentheses around bitwise left shift operations.
The case handled is when resultant value is assigned to a variable.
The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
<<
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
<<
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
<<
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 06:19:24 +0000 (08:19 +0200)]
staging: rts5208: remove extra parentheses around left bit shift operation
Removes extra parentheses around bitwise left shift operations.
The case handled is when resultant value is assigned to a variable.
The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
<<
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
<<
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
<<
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 06:18:47 +0000 (08:18 +0200)]
staging: ozwpan: remove extra parentheses around left bit shift operations
Removes extra parentheses around bitwise left shift operations.
The case handled is when resultant value is assigned to a variable.
The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
<<
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
<<
-c);
+c;
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 06:18:19 +0000 (08:18 +0200)]
staging: lustre: remove extra parentheses around left bit shift operations
Removes extra parentheses around bitwise left shift operations.
The cases handled here are when resultant values are assigned to
variables. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
<<
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
<<
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
<<
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:35:48 +0000 (07:35 +0200)]
staging: xgifb: remove extra parentheses around right bit shift operations
Removes extra parentheses around bitwise right shift operations.
The cases handled here are when resultant values are assigned to
variables. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:35:28 +0000 (07:35 +0200)]
staging: speakup: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The case handled is when the resultant value is assigned to
a variable. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:34:52 +0000 (07:34 +0200)]
staging: slicoss: remove extra parentheses around right bit shift operations
Removes extra parentheses around bitwise right shift operations.
The cases handled here are when resultant values are assigned to
variables. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Some coding style issues were handled manually to avoid
checkpatch warnings and errors.
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:34:07 +0000 (07:34 +0200)]
staging: rtl8723au: remove extra parentheses around right bit shift operations
Removes extra parentheses around bitwise right shift operations.
The cases handled here are when resultant values are assigned to
variables. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:33:39 +0000 (07:33 +0200)]
staging: rtl8712: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The cases handled are when the resultant value is assigned to
a variable or when a shift operation is carried out for a function
argument. The issues were detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:33:06 +0000 (07:33 +0200)]
staging: rtl8192u: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The cases handled are when the resultant value is assigned to
a variable or when a shift operation is carried out for a function
argument. The issues were detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Some coding style issues were handled manually to avoid
checkpatch warnings and errors.
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:32:30 +0000 (07:32 +0200)]
staging: rtl8192e: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The cases handled are when the resultant value is assigned to
a variable or when a shift operation is carried out for a function
argument. The issues were detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Some coding style issues were handled manually to avoid
checkpatch warnings and errors.
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:31:56 +0000 (07:31 +0200)]
staging: rtl8188eu: remove extra parentheses around right bit shift operations
Removes extra parentheses around bitwise right shift operations.
The cases handled here are when resultant values are assigned to
variables. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:31:19 +0000 (07:31 +0200)]
staging: media: lirc: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The case handled here is when the resultant value is assigned to
a variable. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:30:49 +0000 (07:30 +0200)]
staging: media: bcm2048: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The case handled here is when the resultant value is assigned to
a variable. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:30:18 +0000 (07:30 +0200)]
staging: lustre: llite: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The case handled here is when the resultant value is assigned to
a variable. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:29:28 +0000 (07:29 +0200)]
staging: lustre: lclient: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operations.
The cases handled here are when the resultant value is assigned
to a variable. The issue was detected and resolved using the
following coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:28:48 +0000 (07:28 +0200)]
staging: comedi: drivers: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The issue was detected and resolved using the following coccinelle
script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vaishali Thakkar [Tue, 3 Mar 2015 17:04:22 +0000 (22:34 +0530)]
Staging: rtl8712: Eliminate use of _init_timer
This patch introduces the use of API function setup_timer
instead of driver specific function _init_timer as it is
the preferred and standard way to setup and set the timer.
To be compatible with the change, argument types of
referenced functions are changed. Also, definition of
function _init_timer is removed as it is no longer needed
after this change.
This is done using Coccinelle and semantic patch used for
this is as follows:
@@ expression x, y; identifier a, b;@@
- _init_timer (&x, y, a, b);
+ setup_timer (&x, a, (unsigned long)b);
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>