OSDN Git Service
Chris Wilson [Thu, 8 Oct 2015 12:39:54 +0000 (13:39 +0100)]
drm/i915: Map the ringbuffer using WB on LLC machines
If we have llc coherency, we can write directly into the ringbuffer
using ordinary cached writes rather than forcing WC access.
v2: An important consequence is that we can forgo the mappable request
for WB ringbuffers, allowing for many more simultaneous contexts.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Michel Thierry [Wed, 30 Sep 2015 14:36:19 +0000 (15:36 +0100)]
drm/i915/gen8: Flip the 48b switch
Use 48b addresses if hw supports it (i915.enable_ppgtt=3).
Update the sanitize_enable_ppgtt for 48 bit PPGTT mode.
Note, aliasing PPGTT remains 32b only.
v2: s/full_64b/full_48b/. (Akash)
v3: Add sanitize_enable_ppgtt changes until here. (Akash)
v4: Update param description (Chris)
Cc: Akash Goel <akash.goel@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Wed, 23 Sep 2015 14:29:39 +0000 (16:29 +0200)]
drm/i915: Only call commit_planes when there are things to commit.
The atomic helpers set planes_changed on a crtc_state if there is
any plane_state bound to that crtc. If there's none and there is
no pipe update required the crtc has nothing to update, so vblank
evasion can be skipped.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Wed, 23 Sep 2015 14:29:38 +0000 (16:29 +0200)]
drm/i915: Only run commit when crtc is active, v2.
The crtc->active guards are no longer needed now that all state
updates are outside the commit.
Changes since v1:
- Only check crtc->state->active before calling commit_planes_on_crtc.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Wed, 23 Sep 2015 14:29:37 +0000 (16:29 +0200)]
drm/i915: Only commit active planes when updating planes during reset.
In the next commit commit_plane will no longer check if the crtc is active.
To prevent issues with legacy page flips the check should be performed inside
update_primary_planes.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Wed, 23 Sep 2015 14:29:36 +0000 (16:29 +0200)]
drm/i915: Update legacy primary state outside the commit hook, v2.
This should allow not running plane commit when the crtc is off.
While the atomic helpers update those, crtc->x/y is only updated
during modesets, and primary plane is updated after this function
returns.
Unfortunately non-atomic watermarks and fbc still depend on this
state inside i915, so it has to be kept in sync.
Changes since v1:
- Add comment that the legacy state is updated for fbc.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Wed, 23 Sep 2015 11:27:09 +0000 (13:27 +0200)]
drm/i915: Make prepare_plane_fb fully interruptible.
Now that we agreed on not preserving framebuffers pinning is finally
allowed to fail because of signals. Use this to make pinning
and acquire the mutex in an interruptible way too.
Unpinning is still uninterruptible, because it happens as a cleanup
of old state, or undoing pins after one of the pins failed.
The intel_pin_and_fence_fb_obj in page_flip will also wait interruptibly,
and can be aborted now.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Wed, 23 Sep 2015 11:27:08 +0000 (13:27 +0200)]
drm/i915: Make plane fb tracking work correctly, v2.
atomic->disabled_planes is a hack that had to exist because
prepare_fb was only called when a new fb was set. This messed
up fb tracking in some circumstances like aborts from
interruptible waits. As a result interruptible waiting in
prepare_plane_fb was forbidden, but other errors could still
cause frontbuffer tracking to be messed up.
Now that prepare_fb is always called, this hack is no longer
required and prepare_fb may fail without consequences.
Changes since v1:
- Clean up a few fb tracking warnings by changing plane->fb to
plane->state->fb.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Animesh Manna [Tue, 29 Sep 2015 05:31:59 +0000 (11:01 +0530)]
drm/i915/skl: Making DC6 entry is the last call in suspend flow.
Mmio register access after dc6/dc5 entry is not allowed when
DC6 power states are enabled according to bspec (bspec-id 0527),
so enabling dc6 as the last call in suspend flow.
Addtional note from Imre:
Currently we keep DC6 enabled during modesets and DPAUX transfers, which
is not allowed according to the specification. This can lead at least to
PLL locking failures, DPAUX timeouts and prevent deeper package power
states (PC9/10). Fix this for now by enabling DC6 only when we know the
above events (modeset, DPAUX) can't happen.
This a temporary solution as some issues are still unsolved as described
in [1] and [2], we'll address those as a follow-up.
[1]
http://lists.freedesktop.org/archives/intel-gfx/2015-October/077669.html
[2]
http://lists.freedesktop.org/archives/intel-gfx/2015-October/077787.html
v1: Initial version.
v2: Based on review comment from Daniel,
- created a seperate patch for csr uninitialization set call.
v3: Rebased on top of latest code.
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 15 Oct 2015 14:04:04 +0000 (17:04 +0300)]
drm/i915: Kill the leftover RMW from ivb_sprite_disable()
We still had one lingering RMW in ivb_sprite_disable(), all the other
RMWs were killed off from the sprite code some time ago. Kill the
straggler too.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 15 Oct 2015 12:23:01 +0000 (14:23 +0200)]
drm/i915: restore ggtt double-bind avoidance
This was accidentally lost in
commit
75d04a3773ecee617847de963ae4195d6aa74c28
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Tue Apr 28 17:56:17 2015 +0300
drm/i915/gtt: Allocate va range only if vma is not bound
While at it implement an improved version suggested by Chris which
avoids the double-bind irrespective of what type of bind is done
first.
Note that this exact bug was already addressed in
commit
d0e30adc42d979e4adc36b6c112b57337423b70c
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Jul 29 20:02:48 2015 +0100
drm/i915: Mark PIN_USER binding as GLOBAL_BIND without the aliasing ppgtt
but the problem is still that originally in
commit
0875546c5318c85c13d07014af5350e9000bc9e9
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Apr 20 09:04:05 2015 -0700
drm/i915: Fix up the vma aliasing ppgtt binding
if forgotten to take into account there case where we have a
GLOBAL_BIND before a LOCAL_BIND. This patch here fixes that.
v2: Pimp commit message and revert the partial fix.
v3: Split into two functions to specialize on aliasing_ppgtt y/n.
v4: WARN_ON for paranoia in the init sequence, since the ggtt probe
and aliasing ppgtt setup are far apart.
v5: Style nits.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://mid.gmane.org/1444911781-32607-1-git-send-email-daniel.vetter@ffwll.ch
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bob Paauwe [Thu, 27 Aug 2015 20:46:30 +0000 (13:46 -0700)]
drm/i915/skl: Enable pipe gamma for sprite planes.
Since SKL has universal planes, we should configure the sprite planes
and the primary plane the same. For the primary plane we do enable
the pipe gamma on the plane so do the same for the non-primary planes.
Without this, the pipe CRC values will be different for something
displayed on the primary plane and something displayed on a sprite
plane when the ARGB8888 format is used.
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bob Paauwe [Mon, 31 Aug 2015 21:03:30 +0000 (14:03 -0700)]
drm/i915/skl+: Enable pipe CSC on cursor planes. (v2)
Extend this to SKL and BXT as it's needed for these platforms as well.
v2: Change if condition to HAS_DDI() instead of listing each platform
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 13 Oct 2015 08:16:48 +0000 (11:16 +0300)]
MAINTAINERS: add link to the Intel Graphics for Linux web site
There's plenty of drm/i915 related hardware and software documentation,
and firmware downloads for the latest platforms.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Mon, 12 Oct 2015 10:20:59 +0000 (13:20 +0300)]
drm/i915: Move skl/bxt gt specific workarounds to ring init
Some registers are, naturally, lost in gpu reset/suspend cycle.
And some registers, for example in display domain, are not subject
to gpu reset so they retain their contents.
As hang recovery triggers a reset, recoverable gpu hang can currently
flush out essential workarounds and cause havoc later on.
When register GEN8_GARBNTL is missing the WaEnableGapsTsvCreditFix:skl,
it can cause random system hangs [1]. This workaround was added in:
commit
245d96670d26 ("drm/i915:skl: Add WaEnableGapsTsvCreditFix")
But another set of system hangs were observed and the failure pattern
indicated that there was random gpu hang preceding the system hang [2].
This lead to the realization that we lose this workaround and BDW_SCRATCH1
on reset.
Add these workarounds setup in display init to skl/bxt ring init
where LRI workarounds are also setup. This way their setup is not
dependent on display side init.
References: [1] https://bugs.freedesktop.org/show_bug.cgi?id=90854
References: [2] https://bugs.freedesktop.org/show_bug.cgi?id=92315
Reported-by: Tomi Sarvela <tomix.p.sarvela@intel.com>
Cc: Tomi Sarvela <tomix.p.sarvela@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Tomi Sarvela <tomix.p.sarvela@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Fri, 9 Oct 2015 13:11:27 +0000 (14:11 +0100)]
drm/i915: Drop i915_gem_obj_is_pinned() from set-cache-level
Since the remove of the pin-ioctl, we only care about not changing the
cache level on buffers pinned to the hardware as indicated by
obj->pin_display. By knowing that only objects pinned to the hardware
will have an elevated vma->pin_count, so we can coallesce many of the
linear walks over the obj->vma_list.
v2: Try and retrospectively add comments explaining the steps in
rebinding the active VMA.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Fri, 9 Oct 2015 21:22:43 +0000 (18:22 -0300)]
drm/i915: revert a few more watermark commits
This is a squash of the following commits:
Revert "drm/i915: Drop intel_update_sprite_watermarks"
This reverts commit
47c99438b52d12df50e182583634a4cfede3c920.
Revert "drm/i915/ivb: Move WaCxSRDisabledForSpriteScaling w/a to atomic check"
This reverts commit
7809e5ae35b9d8d0710f0874b2e3f10be144e38b.
Revert "drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v3)"
This reverts commit
3a05f5e2e78eab7ffe816abb59b6769e331a1957.
With these reverts, SKL finally stops failing every single FBC test
with FIFO underrun error messages. After some brief testing, it also
seems that this commit prevents the machine from completely freezing
when we run igt/kms_fbc_crc (see fd.o #92355).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92355
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 18 Sep 2015 17:03:46 +0000 (20:03 +0300)]
drm/i915: Remove dev_priv argument from NEEDS_FORCE_WAKE
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 18 Sep 2015 17:03:45 +0000 (20:03 +0300)]
drm/i915: Clean up LVDS register handling
Keep single 'lvds_reg' and 'lvds' variable around in
intel_lvds_init(), and read it just once at the start.
Also intel_lvds_get_config() doesn't need to figure out which reg to use
since it can just consult lvds_encoder->reg.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 22 Sep 2015 16:50:01 +0000 (19:50 +0300)]
drm/i915: Throw out some useless variables
Drop some useless 'reg' variables when we only use them once.
v2: A few more, including a few variable moves
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 18 Sep 2015 17:03:43 +0000 (20:03 +0300)]
drm/i915: Parametrize and fix SWF registers
Parametrize the SWF registers. This also fixes the register offsets,
which were mostly garbage in the old defines.
Also save/restore only as many SWF registers that each platform has.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 18 Sep 2015 17:03:42 +0000 (20:03 +0300)]
drm/i915: s/PIPE_FRMCOUNT_GM45/PIPE_FRMCOUNT_G4X/ etc.
The PIPE_FRMCOUNT_GM45 and PIPE_FLIPCOUNT_GM45 names have bothered me
for a long time. The work equally well for ELK and onwards, so let's
s/GM45/G4X/.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 18 Sep 2015 17:03:41 +0000 (20:03 +0300)]
drm/i915: Turn GEN5_ASSERT_IIR_IS_ZERO() into a function
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 18 Sep 2015 17:03:40 +0000 (20:03 +0300)]
drm/i915: Fix a few bad hex numbers in register defines
A few register mask defines were missing the '0x' from hex numbers. Or
at least I assume those were meant to be hex numbers. Put the '0x' in
place.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 18 Sep 2015 17:03:39 +0000 (20:03 +0300)]
drm/i915: Protect register macro arguments
Always put parens around macro argument evaluations.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 18 Sep 2015 17:03:38 +0000 (20:03 +0300)]
drm/i915: Include gpio_mmio_base in GMBUS reg defines
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 18 Sep 2015 17:03:37 +0000 (20:03 +0300)]
drm/i915: Parametrize HSW video DIP data registers
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Mon, 12 Oct 2015 16:41:08 +0000 (19:41 +0300)]
drm/i915: Eliminate weird parameter inversion from BXT PPS registers
v2: Keep using the same registers (PCH_*) instead of accidentally
starting to use the other ones (BXT_*)2) (Jesse)
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Sat, 10 Oct 2015 09:44:32 +0000 (10:44 +0100)]
drm/i915: Hold dev->event_lock whilst inspecting intel_crtc->unpin_work
We should serialise access to the intel_crtc->unpin_work through the
dev->event_lock spinlock. It should not be possible for it to disappear
without severe error as the mmio_flip worker has not tagged the
unpin_work pending flip-completion. Similarly if the error exists, just
taking the unpin_work whilst holding the spinlock and then using it
unserialised just masks the race. (It is supposed to be valid as the
unpin_work exists until the flip completion interrupt which should not
fire until we flush the mmio writes to update the display base which is
the last time we access the unpin_work from the kthread.)
References: https://bugs.freedesktop.org/show_bug.cgi?id=92335
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Williams, Dan J [Mon, 12 Oct 2015 21:12:57 +0000 (21:12 +0000)]
i915: switch from acpi_os_ioremap to memremap
i915 expects the OpRegion to be cached (i.e. not __iomem), so explicitly
map it with memremap rather than the implied cache setting of
acpi_os_ioremap().
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Lukas Wunner [Mon, 12 Oct 2015 08:57:43 +0000 (10:57 +0200)]
drm/i915: Drop unnecessary #include <linux/vga_switcheroo.h>
Commit
599bbb9de0fe ("drm/i915: i915 cannot provide switcher services.")
removed all remaining vga_switcheroo symbols from intel_acpi.c but left
the include. Drop it.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Sat, 10 Oct 2015 11:35:42 +0000 (13:35 +0200)]
drm/i915: Update DRIVER_DATE to
20151010
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 8 Oct 2015 22:28:25 +0000 (15:28 -0700)]
drm/i915: Partial revert of atomic watermark series
It's been reported that the atomic watermark series triggers some
regressions on SKL, which we haven't been able to track down yet. Let's
temporarily revert these patches while we track down the root cause.
This commit squashes the reverts of:
76305b1 drm/i915: Calculate watermark configuration during atomic check (v2)
a4611e4 drm/i915: Don't set plane visible during HW readout if CRTC is off
a28170f drm/i915: Calculate ILK-style watermarks during atomic check (v3)
de4a9f8 drm/i915: Calculate pipe watermarks into CRTC state (v3)
de165e0 drm/i915: Refactor ilk_update_wm (v3)
Reference: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077190.html
Cc: "Zanoni, Paulo R" <paulo.r.zanoni@intel.com>
Cc: "Vetter, Daniel" <daniel.vetter@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tomas Elf [Thu, 8 Oct 2015 18:31:33 +0000 (19:31 +0100)]
drm/i915: Early exit from semaphore_waits_for for execlist mode.
When submitting semaphores in execlist mode the hang checker crashes in this
function because it is only runnable in ring submission mode. The reason this
is of particular interest to the TDR patch series is because we use semaphores
as a mean to induce hangs during testing (which is the recommended way to
induce hangs for gen8+). It's not clear how this is supposed to work in
execlist mode since:
1. This function requires a ring buffer.
2. Retrieving a ring buffer in execlist mode requires us to retrieve the
corresponding context, which we get from a request.
3. Retieving a request from the hang checker is not straight-forward since that
requires us to grab the struct_mutex in order to synchronize against the
request retirement thread.
4. Grabbing the struct_mutex from the hang checker is nothing that we will do
since that puts us at risk of deadlock since a hung thread might be holding the
struct_mutex already.
Therefore it's not obvious how we're supposed to deal with this. For now, we're
doing an early exit from this function, which avoids any kernel panic situation
when running our own internal TDR ULT.
* v2: (Chris Wilson)
Turned the execlist mode check into a ringbuffer NULL check to make it more
submission mode agnostic and less of a layering violation.
Signed-off-by: Tomas Elf <tomas.elf@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tvrtko Ursulin [Thu, 8 Oct 2015 14:37:00 +0000 (15:37 +0100)]
drm/i915: Remove wrong warning from i915_gem_context_clean
commit
e9f24d5fb7cf3628b195b18ff3ac4e37937ceeae
Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Date: Mon Oct 5 13:26:36 2015 +0100
drm/i915: Clean up associated VMAs on context destruction
Introduced a wrong assumption that all contexts have a ppgtt
instance. This is not true when full PPGTT is not active so
remove the WARN_ON_ONCE from the context cleanup code.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 8 Oct 2015 09:08:20 +0000 (12:08 +0300)]
drm/i915: Determine the stolen memory base address on gen2
There isn't an explicit stolen memory base register on gen2.
Some old comment in the i915 code suggests we should get it via
max_low_pfn_mapped, but that's clearly a bad idea on my MGM.
The e820 map in said machine looks like this:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001f6effff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001f6f0000-0x000000001f6f7fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000001f6f8000-0x000000001f6fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000001f700000-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
That makes max_low_pfn_mapped =
1f6f0000, so assuming our stolen memory
would start there would place it on top of some ACPI memory regions.
So not a good idea as already stated.
The 9MB region after the ACPI regions at 0x1f700000 however looks
promising given that the macine reports the stolen memory size to be
8MB. Looking at the PGTBL_CTL register, the GTT entries are at offset
0x1fee00000, and given that the GTT entries occupy 128KB, it looks like
the stolen memory could start at 0x1f700000 and the GTT entries would
occupy the last 128KB of the stolen memory.
After some more digging through chipset documentation, I've determined
the BIOS first allocates space for something called TSEG (something to
do with SMM) from the top of memory, and then it allocates the graphics
stolen memory below that. Accordind to the chipset documentation TSEG
has a fixed size of 1MB on 855. So that explains the top 1MB in the
e820 region. And it also confirms that the GTT entries are in fact at
the end of the the stolen memory region.
Derive the stolen memory base address on gen2 the same as the BIOS does
(TOM-TSEG_SIZE-stolen_size). There are a few differences between the
registers on various gen2 chipsets, so a few different codepaths are
required.
865G is again bit more special since it seems to support enough memory
to hit 4GB address space issues. This means the PCI allocations will
also affect the location of the stolen memory. Fortunately there
appears to be the TOUD register which may give us the correct answer
directly. But the chipset docs are a bit unclear, so I'm not 100%
sure that the graphics stolen memory is always the last thing the
BIOS steals. Someone would need to verify it on a real system.
I tested this on the my 830 and 855 machines, and so far everything
looks peachy.
v2: Rewrite to use the TOM-TSEG_SIZE-stolen_size and TOUD methods
v3: Fix TSEG size for 830
v4: Add missing 'else' (Chris)
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Thu, 1 Oct 2015 22:57:12 +0000 (19:57 -0300)]
drm/i915: fix FBC buffer size checks
According to my experiments (and later confirmation from the hardware
developers), the maximum sizes mentioned in the specification delimit
how far in the buffer the hardware tracking can go. And the hardware
calculates the size based on the plane address we provide - and the
provided plane address might not be the real x:0,y:0 point due to the
compute_page_offset() function.
On platforms that do the x/y offset adjustment trick it will be really
hard to reproduce a bug, but on the current SKL we can reproduce the
bug with igt/kms_frontbuffer_tracking/fbc-farfromfence. With this
patch, we'll go from "CRC assertion failure" to "FBC unexpectedly
disabled", which is still a failure on the test suite but is not a
perceived user bug - you will just not save as much power as you could
if FBC is disabled.
v2, rewrite patch after clarification from the Hadware guys:
- Rename function so it's clear what the check is for.
- Use the new intel_fbc_get_plane_source_sizes() function in order
to get the proper sizes as seen by FBC.
v3:
- Rebase after the s/sizes/size/ on the previous patch.
- Adjust comment wording (Ville).
- s/used_/effective_/ (Ville).
Testcase: igt/kms_frontbuffer_tracking/fbc-farfromfence (SKL)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Thu, 1 Oct 2015 22:55:57 +0000 (19:55 -0300)]
drm/i915: fix CFB size calculation
We were considering the whole framebuffer height, but the spec says we
should only consider the active display height size. There were still
some unclear questions based on the spec, but the hardware guys
clarified them for us. According to them:
- CFB size = CFB stride * Number of lines FBC writes to CFB
- CFB stride = plane stride / compression limit
- Number of lines FBC writes to CFB = MIN(plane source height, maximum
number of lines FBC writes to CFB)
- Plane source height =
- pipe source height (PIPE_SRCSZ register) (before SKL)
- plane size register height (PLANE_SIZE register) (SKL+)
- Maximum number of lines FBC writes to CFB =
- plane source height (before HSW)
- 2048 (HSW+)
For the plane source height, I could just have made our code do
I915_READ() in order to be more future proof, but since it's not cool
to do register reads I decided to just recalculate the values we use
when we actually write to those registers.
With this patch, depending on your machine configuration, a lot of the
kms_frontbuffer_tracking subtests that used to result in a SKIP due to
not enough stolen memory still start resulting in a PASS.
v2: Use the clipped src size instead of pipe_src_h (Ville).
v3: Use the appropriate information provided by the hardware guys.
v4: Bikesheds: s/sizes/size/, s/fb_cpp/cpp/ (Ville).
v5: - Don't use crtc->config->pipe_src_x for BDW- (Ville).
- Fix the register name written in the comment.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Wed, 30 Sep 2015 20:05:43 +0000 (17:05 -0300)]
drm/i915: remove pre-atomic check from SKL update_primary_plane
The comment suggests the check was there for some non-fully-atomic
case, and I couldn't find a case where we wouldn't correctly
initialize plane_state, so remove the check.
Let's leave a WARN there just in case.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Wed, 23 Sep 2015 15:52:23 +0000 (12:52 -0300)]
drm/i915: don't allocate fbcon from stolen memory if it's too big
Technology has evolved and now we have eDP panels with 3200x1800
resolution. In the meantime, the BIOS guys didn't change the default
32mb for stolen memory. On top of that, we can't assume our users will
be able to increase the default stolen memory size to more than 32mb -
I'm not even sure all BIOSes allow that.
So just the fbcon buffer alone eats 22mb of my stolen memroy, and due
to the BDW/SKL restriction of not using the last 8mb of stolen memory,
all that's left for FBC is 2mb! Since fbcon is not the coolest feature
ever, I think it's better to save our precious stolen resource to FBC
and the other guys.
On the other hand, we really want to use as much stolen memory as
possible, since on some older systems the stolen memory may be a
considerable percentage of the total available memory.
This patch tries to achieve a little balance using a simple heuristic:
if the fbcon wants more than half of the available stolen memory,
don't use stolen memory in order to leave some for FBC and the other
features.
The long term plan should be to implement a way to set priorities for
stolen memory allocation and then evict low priority users when the
high priority ones need the memory. While we still don't have that,
let's try to make FBC usable with the simple solution.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 8 Oct 2015 19:51:57 +0000 (21:51 +0200)]
Revert "drm/i915: Call encoder hotplug for init and resume cases"
This reverts commit
5d250b05918c002b63632c7db91c3c5f924c6a3b.
It results on a deadlock on platforms where we need to (at least
partially) re-init hpd interrupts from power domain code, since
->hot_plug might again grab a power well reference (to do edid/dp_aux
transactions. At least chv is affected.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
References: http://mid.gmane.org/
20151008133548.GX26517@intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Thu, 8 Oct 2015 19:50:57 +0000 (21:50 +0200)]
Revert "drm/i915: Add hot_plug hook for hdmi encoder"
This reverts commit
0b5e88dc25ee6c9040c0355e6e025dcbc9c8de92.
It completely breaks booting on at least bsw (and maybe more).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88081
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Sudip Mukherjee [Thu, 8 Oct 2015 13:57:59 +0000 (19:27 +0530)]
drm/i915: use error path
Use goto to handle the error path to avoid duplicating the same code. In
the error path intel_dig_port is the last one to be released as it was
the first one to be allocated and ideally the error path should be the
reverse of the execution path.
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Javier Martinez Canillas [Thu, 8 Oct 2015 07:57:49 +0000 (09:57 +0200)]
drm/i915/irq: Fix misspelled word register in kernel-doc
There is a typo in the function i915_handle_error()
kernel-doc and the word register is spelled wrongly.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Javier Martinez Canillas [Thu, 8 Oct 2015 07:54:44 +0000 (09:54 +0200)]
drm/i915/irq: Fix kernel-doc warnings
Add the dev parameter for the functions i915_enable_asle_pipestat() and
i915_reset_and_wakeup() to the kernel-doc to fix the following warnings:
.//drivers/gpu/drm/i915/i915_irq.c:586: warning: No description found for parameter 'dev'
.//drivers/gpu/drm/i915/i915_irq.c:2400: warning: No description found for parameter 'dev'
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Francisco Jerez [Wed, 7 Oct 2015 11:44:02 +0000 (14:44 +0300)]
drm/i915: Hook up ring workaround writes at context creation time on Gen6-7.
intel_rcs_ctx_init() emits all workaround register writes on the list
to the ring, in addition to calling i915_gem_render_state_init(). The
workaround list is currently empty on Gen6-7 so this shouldn't cause
any functional changes.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Francisco Jerez [Wed, 7 Oct 2015 11:44:01 +0000 (14:44 +0300)]
drm/i915: Don't warn if the workaround list is empty.
It's not an error for the workaround list to be empty if no
workarounds are needed. This will avoid spamming the logs
unnecessarily on Gen6 after the workaround list is hooked up on
pre-Gen8 hardware by the following commits.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 1 Oct 2015 16:06:50 +0000 (18:06 +0200)]
drm/i915: Resurrect golden context on gen6/7
In
commit
8f0e2b9d95a88ca5d8349deef2375644faf184ae
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Dec 2 16:19:07 2014 +0100
drm/i915: Move golden context init into ->init_context
I've shuffled around per-ctx init code a bit for legacy contexts but
accidentally dropped the render state init call on gen6/7. Resurrect
it.
Reported-by: Francisco Jerez <currojerez@riseup.net>
Cc: Francisco Jerez <currojerez@riseup.net>
Cc: Dave Gordon <david.s.gordon@intel.com>
Cc: Thomas Daniel <thomas.daniel@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Wed, 7 Oct 2015 08:17:46 +0000 (11:17 +0300)]
drm/i915/chv: remove pre-production hardware workarounds
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Appease gcc and remove the unused variable.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Wed, 7 Oct 2015 08:17:44 +0000 (11:17 +0300)]
drm/i915/snb: remove pre-production hardware workaround
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Akash Goel [Fri, 18 Sep 2015 18:09:51 +0000 (23:39 +0530)]
drm/i915/bxt: Set time interval unit to 0.833us
Note that in Bspec you have to dig around in a section called
"Timestamp bases" and Bspec update request is filed.
Signed-off-by: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
[danvet: Add note about state of Bspec.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 6 Oct 2015 10:39:55 +0000 (11:39 +0100)]
drm/i915: Kill DRI1 cliprects
Passing cliprects into the kernel for it to re-execute the batch buffer
with different CMD_DRAWRECT died out long ago. As DRI1 support has been
removed from the kernel, we can now simply reject any execbuf trying to
use this "feature".
To keep Daniel happy with the prospect of being able to reuse these
fields in the next decade, continue to ensure that current userspace is
not passing garbage in through the dead fields.
v2: Fix the cliprects_ptr check
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Thu, 1 Oct 2015 11:18:29 +0000 (12:18 +0100)]
drm/i915: Avoid GPU stalls from kswapd
Exclude active GPU pages from the purview of the background shrinker
(kswapd), as these cause uncontrollable GPU stalls. Given that the
shrinker is rerun until the freelists are satisfied, we should have
opportunity in subsequent passes to recover the pages once idle. If the
machine does run out of memory entirely, we have the forced idling in the
oom-notifier as a means of releasing all the pages we can before an oom
is prematurely executed.
Note that this relies upon an up-front retire_requests to keep the
inactive list in shape, which was added in a previous patch, mostly as
execlist ctx pinning band-aids.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Add note about retire_requests.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Thu, 1 Oct 2015 11:18:28 +0000 (12:18 +0100)]
drm/i915: Remove dead i915_gem_evict_everything()
With UMS gone, we no longer use it during suspend. And with the last
user removed from the shrinker, we can remove the dead code.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Thu, 1 Oct 2015 11:18:27 +0000 (12:18 +0100)]
drm/i915: During shrink_all we only need to idle the GPU
We can forgo an evict-everything here as the shrinker operation itself
will unbind any vma as required. If we explicitly idle the GPU through a
switch to the default context, we not only create a request in an
illegal context (e.g. whilst shrinking during execbuf with a request
already allocated), but switching to the default context will not free
up the memory backing the active contexts - unless in the unlikely
situation that context had already been closed (and just kept arrive by
being the current context). The saving is near zero and the danger real.
To compensate for the loss of the forced retire, add a couple of
retire-requests to i915_gem_shirnk() - this should help free up any
transitive cache from the requests.
Note that the second retire_requests is for the benefit of the
hand-rolled execlist ctx active tracking: We need to manually kick
requests to get those unpinned again. Once that's fixed we can try to
remove this again.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add summary of why we need a pile of retire_requests.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Thu, 1 Oct 2015 11:18:26 +0000 (12:18 +0100)]
drm/i915: Add a tracepoint for the shrinker
Often it is very useful to know why we suddenly purge vast tracts of
memory and surprisingly up until now we didn't even have a tracepoint
for when we shrink our memory.
Note that there are slab_start/end tracepoints already, but those
don't cover the internal recursion when we directly call into our
shrinker code. Hence a separate tracepoint seems justified. Also note
that we don't really need a separate tracepoint for the actual amount
of pages freed since we already have an unbind tracpoint for that.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add a note that there's also slab_start/end and why they're
insufficient.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Libin Yang [Thu, 1 Oct 2015 09:01:09 +0000 (17:01 +0800)]
drm/i915: DocBook add i915_component.h support
Add the item of i915_component.h in DocBook and add the DOC for
i915_component.h. Explain the struct i915_audio_component_ops and
struct i915_audio_component_audio_ops usage.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Libin Yang [Thu, 1 Oct 2015 09:01:08 +0000 (17:01 +0800)]
drm/i915: add kerneldoc for i915_audio_component
Add the kerneldoc for i915_audio_component in i915_component.h
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 7 Oct 2015 13:34:15 +0000 (15:34 +0200)]
Merge remote-tracking branch 'takashi/topic/drm-sync-audio-rate' into drm-intel-next-queued
Pull in the i915/hda changes for N/CTS setting so I can apply the
follow-up documentation work for drm/i915.
Some conflicts because ofc we had to rework i915 while that N/CTS work
was going on. But not more than adjacent changes really.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Chris Wilson [Thu, 1 Oct 2015 11:18:25 +0000 (12:18 +0100)]
drm/i915: shrinker_control->nr_to_scan is now unsigned long
As the shrinker_control now passes us unsigned long targets, update our
shrinker functions to match.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 6 Oct 2015 12:47:55 +0000 (14:47 +0200)]
drm/i915: Fix kerneldoc for i915_gem_shrink_all
I've botched this, so let's fix it.
Botched in
commit
eb0b44adc08c0be01a027eb009e9cdadc31e65a2
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Mar 18 14:47:59 2015 +0100
drm/i915: kerneldoc for i915_gem_shrinker.c
v2: Be a good citizen^Wmaintainer and add the proper commit citation.
Noticed by Jani.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Chris Wilson [Thu, 1 Oct 2015 11:34:47 +0000 (12:34 +0100)]
drm/i915: Use a task to cancel the userptr on invalidate_range
Whilst discussing possible ways to trigger an invalidate_range on a
userptr with an aliased GGTT mmapping (and so cause a struct_mutex
deadlock), the conclusion is that we can, and we must, prevent any
possible deadlock by avoiding taking the mutex at all during
invalidate_range. This has numerous advantages all of which stem from
avoid the sleeping function from inside the unknown context. In
particular, it simplifies the invalidate_range because we no longer
have to juggle the spinlock/mutex and can just hold the spinlock
for the entire walk. To compensate, we have to make get_pages a bit more
complicated in order to serialise with a pending cancel_userptr worker.
As we hold the struct_mutex, we have no choice but to return EAGAIN and
hope that the worker is then flushed before we retry after reacquiring
the struct_mutex.
The important caveat is that the invalidate_range itself is no longer
synchronous. There exists a small but definite period in time in which
the old PTE's page remain accessible via the GPU. Note however that the
physical pages themselves are not invalidated by the mmu_notifier, just
the CPU view of the address space. The impact should be limited to a
delay in pages being flushed, rather than a possibility of writing to
the wrong pages. The only race condition that this worsens is remapping
an userptr active on the GPU where fresh work may still reference the
old pages due to struct_mutex contention. Given that userspace is racing
with the GPU, it is fair to say that the results are undefined.
v2: Only queue (and importantly only take one refcnt) the worker once.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Thu, 1 Oct 2015 11:34:46 +0000 (12:34 +0100)]
drm/i915: Fix userptr deadlock with aliased GTT mmappings
Michał Winiarski found a really evil way to trigger a struct_mutex
deadlock with userptr. He found that if he allocated a userptr bo and
then GTT mmaped another bo, or even itself, at the same address as the
userptr using MAP_FIXED, he could then cause a deadlock any time we then
had to invalidate the GTT mmappings (so at will). Tvrtko then found by
repeatedly allocating GTT mmappings he could alias with an old userptr
mmap and also trigger the deadlock.
To counter act the deadlock, we make the observation that we only need
to take the struct_mutex if the object has any pages to revoke, and that
before userspace can alias with the userptr address space, it must have
invalidated the userptr->pages. Thus if we can check for those pages
outside of the struct_mutex, we can avoid the deadlock. To do so we
introduce a separate flag for userptr objects that we can inspect from
the mmu-notifier underneath its spinlock.
The patch makes one eye-catching change. That is the removal serial=0
after detecting a to-be-freed object inside the invalidate walker. I
felt setting serial=0 was a questionable pessimisation: it denies us the
chance to reuse the current iterator for the next loop (before it is
freed) and being explicit makes the reader question the validity of the
locking (since the object-free race could occur elsewhere). The
serialisation of the iterator is through the spinlock, if the object is
freed before the next loop then the notifier.serial will be incremented
and we start the walk from the beginning as we detect the invalid cache.
To try and tame the error paths and interactions with the userptr->active
flag, we have to do a fair amount of rearranging of get_pages_userptr().
v2: Grammar fixes
v3: Reorder set-active so that it is only set when obj->pages is set
(and so needs cancellation). Only the order of setting obj->pages and
the active-flag is crucial. Calling gup after invalidate-range begin
means the userptr sees the new set of backing storage (and so will not
need to invalidate its new pages), but we have to be careful not to set
the active-flag prior to successfully establishing obj->pages.
v4: Take the active->flag early so we know in the mmu-notifier when we
have to cancel a pending gup-worker.
v5: Rearrange the error path so that is not so convoluted
v6: Set pinned to 0 when negative before calling release_pages()
Reported-by: Michał Winiarski <michal.winiarski@intel.com>
Testcase: igt/gem_userptr_blits/map-fixed*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Thu, 1 Oct 2015 11:34:45 +0000 (12:34 +0100)]
drm/i915: Only update the current userptr worker
The userptr worker allows for a slight race condition where upon there
may two or more threads calling get_user_pages for the same object. When
we have the array of pages, then we serialise the update of the object.
However, the worker should only overwrite the obj->userptr.work pointer
if and only if it is the active one. Currently we clear it for a
secondary worker with the effect that we may rarely force a second
lookup.
v2: Rebase and rename a variable to avoid 80cols
v3: Mention v2
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Michel Thierry [Fri, 2 Oct 2015 13:16:53 +0000 (14:16 +0100)]
drm/i915: prevent out of range pt in the PDE macros (take 3)
We tried to fix this in commit
fdc454c1484a ("drm/i915: Prevent out of
range pt in gen6_for_each_pde").
But the static analyzer still complains that, just before we break due
to "iter < I915_PDES", we do "pt = (pd)->page_table[iter]" with an
iter value that is bigger than I915_PDES. Of course, this isn't really
a problem since no one uses pt outside the macro. Still, every single
new usage of the macro will create a new issue for us to mark as a
false positive.
Also, Paulo re-started the discussion a while ago [1], but didn't end up
implemented.
In order to "solve" this "problem", this patch takes the ideas from
Chris and Dave, but that check would change the desired behavior of the
code, because the object (for example pdp->page_directory[iter]) can be
null during init/alloc, and C would take this as false, breaking the for
loop immediately.
This has been already verified with "static analysis tools".
[1]http://lists.freedesktop.org/archives/intel-gfx/2015-June/068548.html
v2: Make it a single statement, while preventing the common subexpression
elimination (Chris)
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tvrtko Ursulin [Mon, 5 Oct 2015 12:26:36 +0000 (13:26 +0100)]
drm/i915: Clean up associated VMAs on context destruction
Prevent leaking VMAs and PPGTT VMs when objects are imported
via flink.
Scenario is that any VMAs created by the importer will be left
dangling after the importer exits, or destroys the PPGTT context
with which they are associated.
This is caused by object destruction not running when the
importer closes the buffer object handle due the reference held
by the exporter. This also leaks the VM since the VMA has a
reference on it.
In practice these leaks can be observed by stopping and starting
the X server on a kernel with fbcon compiled in. Every time
X server exits another VMA will be leaked against the fbcon's
frame buffer object.
Also on systems where flink buffer sharing is used extensively,
like Android, this leak has even more serious consequences.
This version is takes a general approach from the earlier work
by Rafael Barbalho (drm/i915: Clean-up PPGTT on context
destruction) and tries to incorporate the subsequent discussion
between Chris Wilson and Daniel Vetter.
v2:
Removed immediate cleanup on object retire - it was causing a
recursive VMA unbind via i915_gem_object_wait_rendering. And
it is in fact not even needed since by definition context
cleanup worker runs only after the last context reference has
been dropped, hence all VMAs against the VM belonging to the
context are already on the inactive list.
v3:
Previous version could deadlock since VMA unbind waits on any
rendering on an object to complete. Objects can be busy in a
different VM which would mean that the cleanup loop would do
the wait with the struct mutex held.
This is an even simpler approach where we just unbind VMAs
without waiting since we know all VMAs belonging to this VM
are idle, and there is nothing in flight, at the point
context destructor runs.
v4:
Double underscore prefix for __915_vma_unbind_no_wait and a
commit message typo fix. (Michel Thierry)
Note that this is just a partial/interim fix since we have a bit a
fundamental issue with cleaning up, e.g.
https://bugs.freedesktop.org/show_bug.cgi?id=87729
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Testcase: igt/gem_ppgtt.c/flink-and-exit-vma-leak
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rafael Barbalho <rafael.barbalho@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
[danvet: Add a note that this isn't everything.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
kbuild test robot [Mon, 5 Oct 2015 08:21:11 +0000 (16:21 +0800)]
drm/i915/bxt: vlv_dsi_reset_clocks() can be static
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ander Conselvan de Oliveira [Mon, 5 Oct 2015 07:01:13 +0000 (10:01 +0300)]
drm/i915: Rename DP link training functions
The link training functions had confusing names. The start function
actually does the clock recovery phase of the link training, and the
complete function does the channel equalization. So call them that
instead. Also, every call to intel_dp_start_link_train() was followed
by a call to intel_dp_complete_link_train(), so add a new start
function that calls clock_recory and channel_equalization.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sonika Jindal [Mon, 5 Oct 2015 11:13:15 +0000 (16:43 +0530)]
drm/i915: Add hot_plug hook for hdmi encoder
This patch adds a separate probe function for HDMI
EDID read over DDC channel. This function has been
registered as a .hot_plug handler for HDMI encoder.
The current implementation of hdmi_detect()
function re-sets the cached HDMI edid (in connector->detect_edid) in
every detect call.This function gets called many times, sometimes
directly from userspace probes, forcing drivers to read EDID every
detect function call.This causes several problems like:
1. Race conditions in multiple hot_plug / unplug cases, between
interrupts bottom halves and userspace detections.
2. Many Un-necessary EDID reads for single hotplug/unplug
3. HDMI complaince failures which expects only one EDID read per hotplug
This function will be serving the purpose of really reading the EDID
by really probing the DDC channel, and updating the cached EDID.
The plan is to:
1. i915 IRQ handler bottom half function already calls
intel_encoder->hotplug() function. Adding This probe function which
will read the EDID only in case of a hotplug / unplug.
2. During init_connector this probe will be called to read the edid
3. Reuse the cached EDID in hdmi_detect() function.
The "< gen7" check is there because this was tested only for >=gen7
platforms. For older platforms the hotplug/reading edid path remains same.
v2: Calling set_edid instead of hdmi_probe during init.
Also, for platforms having DDI, intel_encoder for DP and HDMI is same
(taken from intel_dig_port), so for DP also, hot_plug function gets called
which is not intended here. So, check for HDMI in intel_hdmi_probe
Rely on HPD for updating edid only for platforms gen > 8 and also for VLV.
v3: Dropping the gen < 8 || !VLV check. Now all platforms should rely on
hotplug or init for updating the edid.(Daniel)
Also, calling hdmi_probe in init instead of set_edid
v4: Renaming intel_hdmi_probe to intel_hdmi_hot_plug.
Also calling this hotplug handler from intel_hpd_init to take care of init
resume scenarios.
v5: Moved the call to encoder hotplug during init to separate patch(Daniel)
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
[danvet: Mark intel_hdmi_hot_plug as static.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jordan Justen [Fri, 2 Oct 2015 06:09:58 +0000 (23:09 -0700)]
drm/i915: Add GEN7_GPGPU_DISPATCHDIMX/Y/Z to the register whitelist
This is required to support glDispatchComputeIndirect for gen7.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sagar Arun Kamble [Thu, 1 Oct 2015 14:59:27 +0000 (20:29 +0530)]
drm/i915: Update Promotion timer for RC6 TO Mode
When using RC6 timeout mode, the timeout value
should be written to GEN6_RC6_THRESHOLD.
v2: Updated commit message. (Tom)
v3: Rebase over whitespace differences. (Daniel)
Cc: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Alex Dai [Wed, 30 Sep 2015 16:46:37 +0000 (09:46 -0700)]
drm/i915/guc: Add host2guc notification for suspend and resume
Add host2guc interface to notify GuC power state changes when
enter or resume from power saving state.
v3: Move intel_guc_suspend to i915_drm_suspend for consistency.
v2: Add GuC suspend/resume to runtime suspend/resume too
v1: Change to a more flexible way when fill host to GuC scratch
data in order to remove hard coding.
Signed-off-by: Alex Dai <yu.dai@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 8 Sep 2015 15:05:45 +0000 (18:05 +0300)]
drm/i915: Skip CHV PHY asserts until PHY has been fully reset
The BIOS can leave the CHV display PHY in some odd state where
some of the LDOs/lanes won't power down fully when unused. This
will trigger a host of asserts that were added in:
30142273a3e83936fd7b45aa5339311a9295ca51 drm/i915: Add CHV PHY LDO power sanity checks
6669e39f95b5530ca8cb9137703ceb5e83e5d648 drm/i915: Add some CHV DPIO lane power state asserts
To avoid that, skip the asserts until the PHY power well has been
disabled at least once. That will fully reset the PHY, and once
brought back up, the dynamic power down features will work correctly.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak S<deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 8 Sep 2015 15:05:44 +0000 (18:05 +0300)]
drm/i915: Don't bypass LRC on CHV
The docs are unclear as usual, so it's not clear whether LRC should be
bypassed, performed normally or GRC code should be used as the LRC code.
Some old docs stated that LRC bypass ought to be used, more recent ones
no longer say that. Some docs indicated that we could use GRC as the LRC
code on CHV, but the BIOS doesn't do that, so let's not do it either.
Besides to enable LRC bypass properly, I believe we should set the bit
already before deasserting cmnreset.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak S<deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sonika Jindal [Mon, 5 Oct 2015 11:13:14 +0000 (16:43 +0530)]
drm/i915: Call encoder hotplug for init and resume cases
For all the encoders, call the hot_plug if it is registered.
This is required for connected boot and resume cases to generate
fake hpd resulting in reading of edid.
Removing the initial sdvo hot_plug call too so that it will be called
just once from this loop.
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dan Carpenter [Fri, 2 Oct 2015 15:14:22 +0000 (18:14 +0300)]
drm/i915: unlock on error in i915_ppgtt_info()
We need to call intel_runtime_pm_put() and mutex_unlock() before
returning.
Fixes:
7cb5dff8d59d ('drm/i915: fix task reference leak in i915_debugfs.c')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sunil Kamath [Wed, 30 Sep 2015 17:04:57 +0000 (22:34 +0530)]
drm/i915/bxt: Modify BXT BLC according to VBT changes
Latest VBT mentions which set of registers will be used for BLC,
as controller number field. Making use of this field in BXT
BLC implementation. Also, the registers are used in case control
pin indicates display DDI. Adding a check for this.
According to Bspec, BLC_PWM_*_2 uses the display utility pin for output.
To use backlight 2, enable the utility pin with mode = PWM
v2: Jani's review comments
addressed
- Add a prefix _ to BXT BLC registers definitions.
- Add "bxt only" comment for u8 controller
- Remove control_pin check for DDI controller
- Check for valid controller values
- Set pipe bits in UTIL_PIN_CTL
- Enable/Disable UTIL_PIN_CTL in enable/disable_backlight()
- If BLC 2 is used, read active_low_pwm from UTIL_PIN polarity
Satheesh's review comment addressed
- If UTIL PIN is already enabled, BIOS would have programmed it. No
need to disable and enable again.
v3: Jani's review comments
- add UTIL_PIN_PIPE_MASK and UTIL_PIN_MODE_MASK
- Disable UTIL_PIN if controller 1 is used
- Mask out UTIL_PIN_PIPE_MASK and UTIL_PIN_MODE_MASK before enabling
UTIL_PIN
- check valid controller value in intel_bios.c
- add backlight.util_pin_active_low
- disable util pin before enabling
v4: Change for BXT-PO branch:
Stubbed unwanted definition which was existing before
because of DC6 patch.
UTIL_PIN_MODE_PWM (0x1b << 24)
v2: Fixed Jani's review comment.
v3: Split the backight PWM frequency programming into separate patch,
in cases BIOS doesn't initializes it.
v4: Starting afresh and not modifying existing state for backlight, as
per Jani's recommendation.
v5: Fixed Jani's review comment wrt util pin enable
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Signed-off-by: Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Shashank Sharma [Tue, 1 Sep 2015 14:11:46 +0000 (19:41 +0530)]
drm/i915/bxt: get DSI pixelclock
BXT's DSI PLL is different from that of VLV. So this patch
adds a new function to get the current DSI pixel clock based
on the PLL divider ratio and lane count.
This function is required for intel_dsi_get_config() function.
v2: Fixed Jani's review comments.
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Shashank Sharma [Tue, 1 Sep 2015 14:11:45 +0000 (19:41 +0530)]
drm/i915/bxt: get_hw_state for BXT
Pick appropriate port control register (BXT or VLV), based on device.
Get the current hw state wrt Mipi port.
v2: Rebased on latest drm nightly branch.
v3: Removed the GET_DSI_PORT_CTRL Macro for consistency with earlier
implementations as per Jani's suggestion.
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Shashank Sharma [Tue, 1 Sep 2015 14:11:44 +0000 (19:41 +0530)]
drm/i915/bxt: DSI disable and post-disable
This patch contains changes to support DSI disble sequence in BXT.
The changes are:
1. BXT specific changes in clear_device_ready function.
2. BXT specific changes in DSI disable and post-disable functions.
3. Add a new function to reset BXT Dphy clock and dividers
(bxt_dsi_reset_clocks).
4. Moved some part of the vlv clock reset code, in a new function
(vlv_dsi_reset_clocks) maintaining the exact same sequence.
5. Wrapper function to call corresponding reset clock function.
v2: Fixed Jani's review comments.
v3: Removed the GET_DSI_PORT_CTRL Macro for consistency with earlier
implementations as per Jani's suggestion.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Shashank Sharma [Wed, 23 Sep 2015 17:57:17 +0000 (23:27 +0530)]
drm/i915/bxt: Program Tx Rx and Dphy clocks
BXT DSI clocks are different than previous platforms. So adding a
new function to program following clocks and dividers:
1. Program variable divider to generate input to Tx clock divider
(Output value must be < 39.5Mhz)
2. Select divide by 2 option to get < 20Mhz for Tx clock
3. Program 8by3 divider to generate Rx clock
v2: Fixed Jani's review comments. Adjusted the Macro definition as
per convention. Simplified the logic for bit definitions for
MIPI PORT A and PORT C in same registers.
v3: Refactored the macros for TX, RX Escape and DPHY clocks as per
Jani's suggestion.
v4: Addressed Jani's review comments.
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Shashank Sharma [Tue, 1 Sep 2015 14:11:42 +0000 (19:41 +0530)]
drm/i915/bxt: DSI enable for BXT
This patch contains following changes:
1. MIPI device ready changes to support dsi_pre_enable. Changes
are specific to BXT device ready sequence. Added check for
ULPS mode(No effects on VLV).
2. Changes in dsi_enable to pick BXT port control register.
3. Changes in dsi_pre_enable to restrict DPIO programming for VLV
v2: Fixed Jani's review comments. Removed the changes in VLV/CHV
code. Fixed the macros to get proper port offsets.
v3: Rebased on latest drm-nightly branch. Fixed Jani's review comments.
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Shashank Sharma [Thu, 1 Oct 2015 16:53:49 +0000 (22:23 +0530)]
drm/i915/bxt: DSI encoder support in CRTC modeset
SKL and BXT qualifies the HAS_DDI() check, and hence haswell
modeset functions are re-used for modeset sequence. But DDI
interface doesn't include support for DSI.
This patch adds:
1. cases for DSI encoder, in those modeset functions and allows
a CRTC modeset
2. Adds call to pre_pll enabled from CRTC modeset function. Nothing
needs to be done as such in CRTC for DSI encoder, as PLL, clock
and and transcoder programming will be taken care in encoder's
pre_enable and pre_pll_enable function.
v2: Fixed Jani's review comments. Added INVALID_PORT for non DDI
encoder like DSI for platforms having HAS_DDI as true.
v3: Rebased on latest drm-nightly branch. Added a WARN_ON for invalid
encoder.
v4: WARN_ON for invalid encoder is refactored as per Jani's suggestion.
Fixed the sequence for pre_pll_enable.
v5: Protected DDI code paths in case of DSI encoder calls.
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Wed, 30 Sep 2015 20:00:44 +0000 (23:00 +0300)]
drm/i915: rename INSTDONE1 to GEN4_INSTDONE1
This register was added on GEN4, by the name INSTDONE_1 whereas the GEN6
specification calls it INSTDONE_2. Keep the original name with a
platform prefix to make it clearer which INSTDONE register instance this
is. Also add a comment about the SNB alternative name.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Wed, 30 Sep 2015 20:00:43 +0000 (23:00 +0300)]
drm/i915: rename INSTDONE to GEN2_INSTDONE
We have a bunch of INSTDONE registers for different platforms and
purposes and it's not immediately clear which instance they are just by
looking at the register name. This one was added on GEN2, where it was
the only INSTDONE register, so mark it as such.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Wed, 30 Sep 2015 20:00:42 +0000 (23:00 +0300)]
drm/i915: remove duplicate names for the render ring INSTDONE register
We use 3 different names to refer to the same render ring INSTDONE
register. This can be confusing when comparing two parts of the code
accessing the register via different names. Although the GEN4 version's
layout is different, we treat it the same way as the GEN7+ version, in
that we simply read it out during error capture. So remove the
duplicates and leave a comment about the GEN4 difference.
Note that there is also a GEN2 version of this register, but that's on a
different address so not handled in this patch.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Michel Thierry [Thu, 1 Oct 2015 12:33:57 +0000 (13:33 +0100)]
drm/i915: Wa32bitGeneralStateOffset & Wa32bitInstructionBaseOffset
There are some allocations that must be only referenced by 32-bit
offsets. To limit the chances of having the first 4GB already full,
objects not requiring this workaround use DRM_MM_SEARCH_BELOW/
DRM_MM_CREATE_TOP flags
In specific, any resource used with flat/heapless (0x00000000-0xfffff000)
General State Heap (GSH) or Instruction State Heap (ISH) must be in a
32-bit range, because the General State Offset and Instruction State
Offset are limited to 32-bits.
Objects must have EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag to indicate if
they can be allocated above the 32-bit address range. To limit the
chances of having the first 4GB already full, objects will use
DRM_MM_SEARCH_BELOW + DRM_MM_CREATE_TOP flags when possible.
The libdrm user of the EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag is here:
http://lists.freedesktop.org/archives/intel-gfx/2015-September/075836.html
v2: Changed flag logic from neeeds_32b, to supports_48b.
v3: Moved 48-bit support flag back to exec_object. (Chris, Daniel)
v4: Split pin flags into PIN_ZONE_4G and PIN_HIGH; update PIN_OFFSET_MASK
to use last PIN_ defined instead of hard-coded value; use correct limit
check in eb_vma_misplaced. (Chris)
v5: Don't touch PIN_OFFSET_MASK and update workaround comment (Chris)
v6: Apply pin-high for ggtt too (Chris)
v7: Handle simultaneous pin-high and pin-mappable end correctly (Akash)
Fix check for entries currently using +4GB addresses, use min_t and
other polish in object_bind_to_vm (Chris)
v8: Commit message updated to point to libdrm patch.
v9: vmas are allocated in the correct ozone, so only check flag when the
vma has not been allocated. (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v4)
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sagar Arun Kamble [Wed, 30 Sep 2015 16:57:37 +0000 (09:57 -0700)]
drm/i915/guc: Don't forward flip interrupts to GuC
Due to flip interrupts GuC stays awake always and GT does not enter
RC6. Do not route those interrupts to GuC for now. Driver won't touch
DE_GUCRMR register and leave it as what default value.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Alex Dai <yu.dai@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Wed, 30 Sep 2015 14:06:43 +0000 (17:06 +0300)]
drm/i915: s/GET_CFG_CR1_REG/DPLL_CFGCR1/ etc.
v2: Use SKL_DPLLx symbolic names instead of raw numbers
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 24 Sep 2015 22:53:18 +0000 (15:53 -0700)]
drm/i915: Calculate watermark configuration during atomic check (v2)
v2: Don't forget to actually check the cstate->active value when
tallying up the number of active CRTC's. (Ander)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 24 Sep 2015 22:53:17 +0000 (15:53 -0700)]
drm/i915: Don't set plane visible during HW readout if CRTC is off
We already ensure that pstate->visible = false when crtc->active = false
during runtime programming; make sure we follow the same logic when
reading out initial hardware state.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 24 Sep 2015 22:53:16 +0000 (15:53 -0700)]
drm/i915: Calculate ILK-style watermarks during atomic check (v3)
Calculate pipe watermarks during atomic calculation phase, based on the
contents of the atomic transaction's state structure. We still program
the watermarks at the same time we did before, but the computation now
happens much earlier.
While this patch isn't too exciting by itself, it paves the way for
future patches. The eventual goal (which will be realized in future
patches in this series) is to calculate multiple sets up watermark
values up front, and then program them at different times (pre- vs
post-vblank) on the platforms that need a two-step watermark update.
While we're at it, s/intel_compute_pipe_wm/ilk_compute_pipe_wm/ since
this function only applies to ILK-style watermarks and we have a
completely different function for SKL-style watermarks.
Note that the original code had a memcmp() in ilk_update_wm() to avoid
calling ilk_program_watermarks() if the watermarks hadn't changed. This
memcmp vanishes here, which means we may do some unnecessary result
generation and merging in cases where watermarks didn't change, but the
lower-level function ilk_write_wm_values already makes sure that we
don't actually try to program the watermark registers again.
v2: Squash a few commits from the original series together; no longer
leave pre-calculated wm's in a separate temporary structure since
it's easier to follow the logic if we just cut over to using the
pre-calculated values directly.
v3:
- Pass intel_crtc instead of drm_crtc to .compute_pipe_wm() entrypoint
and use intel_atomic_get_crtc_state() to avoid need for extra
casting. (Ander)
- Drop unused intel_check_crtc() function prototype. (Ander)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 24 Sep 2015 22:53:15 +0000 (15:53 -0700)]
drm/i915: Calculate pipe watermarks into CRTC state (v3)
A future patch will calculate these during the atomic 'check' phase
rather than at WM programming time, so let's store the watermark
values we're planning to use in the CRTC state; the values actually
active on the hardware remains in intel_crtc.
While we're at it, do some minor restructuring to keep ILK and SKL
values in a union.
v2: Don't move cxsr_allowed to state (Maarten)
v3: Only calculate watermarks in state. Still keep active watermarks in
intel_crtc itself. (Ville)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Sep 2015 22:53:14 +0000 (15:53 -0700)]
drm/i915: Refactor ilk_update_wm (v3)
Split ilk_update_wm() into two parts; one doing the programming
and the other the calculations.
v2: Fix typo in commit message
v3 (by Matt): Heavily rebased for current codebase.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 24 Sep 2015 22:53:13 +0000 (15:53 -0700)]
drm/i915: Drop intel_update_sprite_watermarks
The only platform that still has an update_sprite_wm entrypoint is SKL;
on SKL, intel_update_sprite_watermarks just updates intel_plane->wm and
then performs a regular watermark update. However intel_plane->wm is
only used to update a couple fields in intel_wm_config, and those fields
are never used by the SKL code, so on SKL an update_sprite_wm is
effectively identical to an update_wm call. Since we're already
ensuring that the regular intel_update_wm is called any time we'd try to
call intel_update_sprite_watermarks, the whole call is redundant and can
be dropped.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 24 Sep 2015 22:53:12 +0000 (15:53 -0700)]
drm/i915/ivb: Move WaCxSRDisabledForSpriteScaling w/a to atomic check
Determine whether we need to apply this workaround at atomic check time
and just set a flag that will be used by the main watermark update
routine.
Moving this workaround into the atomic framework reduces
ilk_update_sprite_wm() to just a standard watermark update, so drop it
completely and just ensure that ilk_update_wm() is called whenever a
sprite plane is updated in a way that would affect watermarks.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 24 Sep 2015 22:53:11 +0000 (15:53 -0700)]
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v3)
Just pull the info out of the state structures rather than staging
it in an additional set of structures. To make this more
straightforward, we change the signature of several internal WM
functions to take the crtc state as a parameter.
v2:
- Don't forget to skip cursor planes on a loop in the DDB allocation
function to match original behavior. (Ander)
- Change a use of intel_crtc->active to cstate->active. They should
be identical, but it's better to be consistent. (Ander)
- Rework more function signatures to pass states rather than crtc for
consistency. (Ander)
v3:
- Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten)
- Packed formats should pass '0' to drm_format_plane_cpp(), not 1.
(Maarten)
- Drop unwanted WARN_ON() for disabled planes when calculating data
rate for SKL. (Maarten)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 24 Sep 2015 22:53:10 +0000 (15:53 -0700)]
drm/i915/skl: Simplify wm structures slightly (v2)
A bunch of SKL watermark-related structures have the cursor plane as a
separate entry from the rest of the planes. Since a previous patch
updated I915_MAX_PLANES such that those plane arrays now have a slot for
the cursor, update the code to use the new slot in the existing plane
arrays and kill off the cursor-specific structures.
There shouldn't be any functional change here; this is just shuffling
around how the data is stored in some of the data structures. The whole
patch is generated with Coccinelle via the following semantic patch:
@@ struct skl_pipe_wm_parameters WMP; @@
- WMP.cursor
+ WMP.plane[PLANE_CURSOR]
@@ struct skl_pipe_wm_parameters *WMP; @@
- WMP->cursor
+ WMP->plane[PLANE_CURSOR]
@@ @@
struct skl_pipe_wm_parameters {
...
- struct intel_plane_wm_parameters cursor;
...
};
@@
struct skl_ddb_allocation DDB;
expression E;
@@
- DDB.cursor[E]
+ DDB.plane[E][PLANE_CURSOR]
@@
struct skl_ddb_allocation *DDB;
expression E;
@@
- DDB->cursor[E]
+ DDB->plane[E][PLANE_CURSOR]
@@ @@
struct skl_ddb_allocation {
...
- struct skl_ddb_entry cursor[I915_MAX_PIPES];
...
};
@@
struct skl_wm_values WMV;
expression E1, E2;
@@
(
- WMV.cursor[E1][E2]
+ WMV.plane[E1][PLANE_CURSOR][E2]
|
- WMV.cursor_trans[E1]
+ WMV.plane_trans[E1][PLANE_CURSOR]
)
@@
struct skl_wm_values *WMV;
expression E1, E2;
@@
(
- WMV->cursor[E1][E2]
+ WMV->plane[E1][PLANE_CURSOR][E2]
|
- WMV->cursor_trans[E1]
+ WMV->plane_trans[E1][PLANE_CURSOR]
)
@@ @@
struct skl_wm_values {
...
- uint32_t cursor[I915_MAX_PIPES][8];
...
- uint32_t cursor_trans[I915_MAX_PIPES];
...
};
@@ struct skl_wm_level WML; @@
(
- WML.cursor_en
+ WML.plane_en[PLANE_CURSOR]
|
- WML.cursor_res_b
+ WML.plane_res_b[PLANE_CURSOR]
|
- WML.cursor_res_l
+ WML.plane_res_l[PLANE_CURSOR]
)
@@ struct skl_wm_level *WML; @@
(
- WML->cursor_en
+ WML->plane_en[PLANE_CURSOR]
|
- WML->cursor_res_b
+ WML->plane_res_b[PLANE_CURSOR]
|
- WML->cursor_res_l
+ WML->plane_res_l[PLANE_CURSOR]
)
@@ @@
struct skl_wm_level {
...
- bool cursor_en;
...
- uint16_t cursor_res_b;
- uint8_t cursor_res_l;
...
};
v2: Use a PLANE_CURSOR enum entry rather than making the code reference
I915_MAX_PLANES or I915_MAX_PLANES+1, which was confusing. (Ander)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 24 Sep 2015 22:53:09 +0000 (15:53 -0700)]
drm/i915: Determine I915_MAX_PLANES from plane enum
Let the compiler figure out what I915_MAX_PLANES is from 'enum plane' so
that we don't need a separate #define.
While we're at it, add the cursor plane to the enum. This will cause
I915_MAX_PLANES to now include the cursor plane in its count (it didn't
previously). This change is safe since we currently only use this
value in array declarations (never in the actual code logic); we just
wind up allocating slightly more memory than we need to. A followup
patch will cause various parts of the code to start using the extra
array element where appropriate.
(This patch probably should have been squashed with the followup patch,
but I couldn't figure out how to get Coccinelle to modify enum
declarations...)
Suggested-by: Ander Conselvan De Oliveira <conselvan2@gmail.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 24 Sep 2015 22:53:08 +0000 (15:53 -0700)]
drm/i915: Eliminate usage of pipe_wm_parameters from ILK-style WM (v2)
Just pull the info out of the CRTC state structure rather than staging
it in an additional structure.
Note that we use cstate->active rather than intel_crtc->active which may
appear to be a change in behavior. However since we're no longer trying
to recalculate watermarks during the "pipe off" stage of a modeset,
intel_crtc->active and cstate->active should always be identical when
watermarks are calculated (at least for ILK-style platforms).
v2: Clarify reasoning for cstate->active and add a WARN_ON to the code
to assert that it really is always identical to intel_crtc->active
as expected.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>