OSDN Git Service
Alexander Graf [Wed, 23 Mar 2011 09:58:07 +0000 (10:58 +0100)]
s390x: Implement opcode helpers
There are some instructions that can't (or shouldn't) be expressed by pure
tcg code. For those, we call into externally compiled C functions.
This patch implements those C functions.
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Wed, 23 Mar 2011 09:58:07 +0000 (10:58 +0100)]
s390x: helper functions for system emulation
When running system emulation, we need to transverse through the MMU and
deliver interrupts according to the specification.
This patch implements those two pieces and in addition adjusts the CPU
initialization code to account for the new fields in CPUState.
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Mon, 2 May 2011 08:11:40 +0000 (10:11 +0200)]
s390x: Shift variables in CPUState for memset(0)
The default reset handler does a memset(0) until right in between CPU_COMMON.
I incorrectly changed that behavior on the s390x port, so let's move the fields
in CPUState around to reflect the correct split up to which point memset(0)
zeros out everything.
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Wed, 13 Apr 2011 08:55:11 +0000 (10:55 +0200)]
s390x: keep hint on virtio managing size
The s390x virtio bus keeps management information on virtio after the top
of the guest's RAM. We need to be able to tell the guest the size of its
RAM (without virtio stuff), but also be able to trap when the guest accesses
RAM outside of its scope (including virtio stuff).
So we need a variable telling us the size of the virtio stuff, so we can
calculate the highest available RAM address from that.
While at it, also increase the maximum number of virtio pages, so we play
along well with more recent kernels that spawn a ridiculous number of virtio
console adapters.
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Fri, 15 Apr 2011 13:16:40 +0000 (15:16 +0200)]
s390x: make kvm exported functions conditional on kvm
We have some helper functions we use to directly invoke KVM
functionality from device emulation code.
This patch replaces those exported functions with static inline
stubs when not building with KVM enabled.
Signed-off-by: Alexander Graf <agraf@suse.de>
Ulrich Hecht [Fri, 24 Jul 2009 14:57:31 +0000 (16:57 +0200)]
s390x: s390x-linux-user support
This patch adds support for running s390x binaries in the linux-user emulation
code.
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Wed, 13 Apr 2011 11:08:44 +0000 (13:08 +0200)]
tcg: extend max tcg opcodes when using 64-on-32bit
When running a 64 bit guest on a 32 bit host, we tend to use more TCG ops
than on a 64 bit host. Reflect that in the reserved opcode amount constant.
Signed-off-by: Alexander Graf <agraf@suse.de>
Christian Borntraeger [Thu, 5 May 2011 07:29:57 +0000 (09:29 +0200)]
s390x: fix smp support for kvm
Currently smp support for kvm does not work. Qemu does a kvm run even on
secondary CPUs which dont have a sane state (initial psw == 0)
triggering some program faults. Architecturally these cpus are in the stopped
state, so we should not do the kvm run ioctl. (these CPUs will be started
by a SIGP restart later during the boot process)
We need to tell the loop that this cpu should not run. Jan Kiszka pointed
out that kvm_arch_process_async_events is the right place to do.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Thu, 19 May 2011 09:57:09 +0000 (11:57 +0200)]
ahci: Fix non-NCQ accesses for LBA > 16bits
AHCI provides two ways of reading/writing data:
1) NCQ
2) ATA commands with the LBA in the command FIS
In the second code path, we didn't handle any LBAs that were bigger than
16 bits, so whenever a guest that used high LBA numbers wanted to access
data, the LBA got truncated down to 16 bits, giving the guest garbage.
This patch adds support for LBAs higher than 16 bits. I've tested that it
works just fine with SeaBIOS and Linux guests. This patch also unbreaks
the often reported grub errors people have seen with AHCI.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster [Mon, 16 May 2011 13:04:57 +0000 (15:04 +0200)]
block: Remove type hint, it's guest matter, doesn't belong here
No users of bdrv_get_type_hint() left. bdrv_set_type_hint() can make
the media removable by side effect. Make that explicit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster [Mon, 16 May 2011 13:04:56 +0000 (15:04 +0200)]
blockdev: Store -drive option media in DriveInfo
DriveInfo is closely tied to -drive, and like -drive, it mixes
information about host and guest part of the block device. Unlike
DriveInfo, BlockDriverState should be about the host part only.
One of the remaining guest bits there is the "type hint". -drive
option media sets it, and qdevs "ide-drive", "scsi-disk" and non-qdev
IF_XEN devices check it to pick HD vs. CD.
Communicate -drive option media via new DriveInfo member media_cd
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster [Mon, 16 May 2011 13:04:55 +0000 (15:04 +0200)]
block QMP: Deprecate query-block's "type", drop info block's "type="
query-block's specification documents response member "type" with
values "hd", "cdrom", "floppy", "unknown".
Its value is unreliable: a block device used as floppy has type
"floppy" if created with if=floppy, but type "hd" if created with
if=none.
That's because with if=none, the type is at best a declaration of
intent: the drive can be connected to any guest device. Its type is
really the guest device's business. Reporting it here is wrong.
No known user of QMP uses "type". It's unlikely that any unknown
users exist, because its value is useless unless you know how the
block device was created. But then you also know the true value.
Fixing the broken value risks breaking (hypothetical!) clients that
somehow rely on the current behavior. Not fixing the value risks
breaking (hypothetical!) clients that rely on the value to be
accurate. Can't entirely avoid hypothetical lossage. Change the
value to be always "unknown".
This makes "info block" always report "type=unknown". Pointless.
Change it to not report the type.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster [Wed, 18 May 2011 16:31:02 +0000 (18:31 +0200)]
defaults: ide-cd, ide-hd and scsi-cd devices suppress default CD-ROM
ide-hd has to suppress the default CD-ROM, or else you can't put one
on secondary master without -nodefaults.
Unlike legacy scsi-disk, scsi-cd suppresses default CD-ROM.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster [Mon, 16 May 2011 13:04:53 +0000 (15:04 +0200)]
scsi: Split qdev "scsi-disk" into "scsi-hd" and "scsi-cd"
A "scsi-disk" is either a hard disk or a CD-ROM, depending on the
associated BlockDriverState's type hint. Unclean; disk vs. CD belongs
to the guest part, not the host part.
Have separate qdevs "scsi-hd" and "scsi-cd" to model disk vs. CD in
the guest part.
Keep scsi-disk for backward compatibility.
Don't copy scsi-disk property removable to scsi-cd. It's not used and
always zero(!) there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster [Mon, 16 May 2011 13:04:52 +0000 (15:04 +0200)]
ide: Split qdev "ide-drive" into "ide-hd" and "ide-cd"
An "ide-drive" is either a hard disk or a CD-ROM, depending on the
associated BlockDriverState's type hint. Unclean; disk vs. CD belongs
to the guest part, not the host part.
Have separate qdevs "ide-hd" and "ide-cd" to model disk vs. CD in
the guest part.
Keep ide-drive for backward compatibility.
"ide-disk" would perhaps be a nicer name than "ide-hd", but there's
already "scsi-disk", which is like "ide-drive", and will be likewise
split in the next commit. {ide,scsi}-{hd,cd} is the best consistent
set of names I could find within the backward compatibility
straightjacket.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Mon, 16 May 2011 12:56:53 +0000 (13:56 +0100)]
qed: support for growing images
The .bdrv_truncate() operation resizes images and growing is easy to
implement in QED. Simply check that the new size is valid and then
update the image_size header field to reflect the new size.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Dmitry Konishchev [Wed, 18 May 2011 11:03:59 +0000 (15:03 +0400)]
qemu_img: is_not_zero() optimization
I run qemu-img under profiler and realized, that most of CPU time is
consumed by is_not_zero() function. I had made a couple of optimizations
on it and got the following output for `time qemu-img convert -O qcow2
volume.qcow2 snapshot.qcow2`:
Original qemu-img:
real 0m56.159s
user 0m34.670s
sys 0m12.079s
Patched qemu-img:
real 0m34.805s
user 0m18.445s
sys 0m12.552s
Signed-off-by: Dmitry Konishchev <konishchev@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Mon, 9 May 2011 15:45:40 +0000 (16:45 +0100)]
qed: Periodically flush and clear need check bit
One strategy to limit the startup delay of consistency check when
opening image files is to ensure that the file is marked dirty for as
little time as possible.
QED currently marks the image dirty when the first allocating write
request is issued and clears the dirty bit again when the image is
cleanly closed. In practice that means the image is marked dirty for
most of a guest's lifetime and prone to being in a dirty state upon
crash or power failure.
It is safe to clear the dirty bit after all allocating write requests
have completed and a flush has been performed. This patch adds a timer
after the last allocating write request completes. When the timer fires
it will flush and then clear the dirty bit. The timer is set to 5
seconds and is cancelled upon arrival of a new allocating write request.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Mon, 9 May 2011 15:45:39 +0000 (16:45 +0100)]
qemu-tool: Stub out qemu-timer functions
Block drivers may use timers for flushing metadata to disk or
reconnecting to a network drive. Stub out the following functions in
qemu-tool.c:
QEMUTimer *qemu_new_timer_ns(QEMUClock *clock, int scale,
QEMUTimerCB *cb, void *opaque)
void qemu_free_timer(QEMUTimer *ts)
void qemu_del_timer(QEMUTimer *ts)
void qemu_mod_timer(QEMUTimer *ts, int64_t expire_time)
int64_t qemu_get_clock_ns(QEMUClock *clock)
They will result in timers never firing when linked against qemu-tool.o.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jan Kiszka [Mon, 9 May 2011 15:48:19 +0000 (17:48 +0200)]
ahci: Fix crashes on duplicate BH registration
If ahci_dma_set_inactive is called a while there is still a pending BH
from a previous run, we will crash on the second run of
ahci_check_cmd_bh as it overwrites AHCIDevice::check_bh. Avoid this
broken and redundant duplicate registration.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jes Sorensen [Mon, 9 May 2011 15:32:20 +0000 (17:32 +0200)]
Add documentation for qemu_progress_{init,print}()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Mon, 9 May 2011 09:42:03 +0000 (11:42 +0200)]
ide: Turn debug messages into assertions
These printfs aren't really debug messages, but clearly indicate a bug if they
ever become effective. Noone uses DEBUG_IDE, let's re-enable the check
unconditionally and make it an assertion instead of printfs in the device
emulation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Sun, 8 May 2011 07:01:52 +0000 (09:01 +0200)]
hw/xen_disk: Remove unused local variable
cppcheck report:
hw/xen_disk.c:309: style:
Variable 'len' is assigned a value that is never used
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jes Sorensen [Fri, 6 May 2011 09:39:11 +0000 (11:39 +0200)]
qemu-img.c: Remove superfluous parenthesis
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Mon, 2 May 2011 15:32:54 +0000 (17:32 +0200)]
posix-aio-compat: Fix idle_threads counter
A thread should only be counted as idle when it really is waiting for new
requests. Without this patch, sometimes too few threads are started as busy
threads are counted as idle.
Not sure if it makes a difference in practice outside some artificial
qemu-io/qemu-img tests, but I think the change makes sense in any case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Andrea Arcangeli [Tue, 3 May 2011 20:03:39 +0000 (22:03 +0200)]
ide: cleanup warnings
Add \n.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jan Kiszka [Sun, 8 May 2011 17:54:52 +0000 (19:54 +0200)]
ahci: Unbreak bar registration
Fix regression of
667bb59: ahci_init initializes ahci.mem, so we have to
move bar registration after it.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Weil [Sun, 15 May 2011 07:51:59 +0000 (09:51 +0200)]
w32: Fix missing declaration of ffs()
target-ppc/cpu.h now needs ffs(), too, so ffs() must be declared
before this file is included.
Moving the declaration from qemu-common.h to qemu-os-win32.h
(which is included in qemu-common.h early) fixes the compiler
warning for w32.
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Michael Tokarev [Sat, 7 May 2011 21:18:30 +0000 (01:18 +0400)]
set $SDL_VIDEODRIVER=x11 on Linux to prevent sudo kvm from fighting for video card
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Peter Maydell [Tue, 3 May 2011 13:50:13 +0000 (14:50 +0100)]
configure: List available targets in --help output
Include the list of available targets in the --help output
for the --target-list= option.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Sat, 14 May 2011 23:00:20 +0000 (01:00 +0200)]
target-mips: Fix warning caused by unused local variable
Fix compilation with gcc-4.6, based on a patch from Stefan
Weil <weil@mail.berlios.de>.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Sat, 14 May 2011 22:35:13 +0000 (00:35 +0200)]
configure: quote kvm_ppc_pvr
Stefan Weil [Sat, 7 May 2011 20:49:33 +0000 (22:49 +0200)]
target-lm32: Remove unused local variables
cppcheck report:
target-lm32/translate.c:587: style:
Variable 't0' is assigned a value that is never used
target-lm32/translate.c:588: style:
Variable 'l1' is assigned a value that is never used
Remove both variables. Please check whether that is the correct solution.
Cc: Michael Walle <michael@walle.cc>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Peter Maydell [Thu, 5 May 2011 18:35:35 +0000 (19:35 +0100)]
target-arm: Fix VMLA, VMLS, VNMLS, VNMLA handling of NaNs
Correct handling of NaNs for VFP VMLA, VMLS, VNMLS and VNMLA requires that
we implement the set of negations and additions specified by the ARM ARM;
plausible looking simplifications like turning (-A + B) into (B - A) or
computing (A + B) rather than (B + A) result in selecting the wrong NaN or
returning a NaN with the wrong sign bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Brad Hards [Fri, 29 Apr 2011 11:46:12 +0000 (21:46 +1000)]
doc: Add explanation that -alt-grab and -ctrl-grab affect special keys
Phillip Merensky reported that the special keys (e.g. Ctrl-Alt-f for full
screen) did not work correctly if -alt-grab is used.
BUG: 696530
Review of ui/sdl.c:sdl_refresh indicates that this is the intended behaviour,
so we should update the documentation to match the actual behaviour, as
suggested by Phillip in the bug report.
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Sat, 14 May 2011 14:54:59 +0000 (16:54 +0200)]
Merge branch 'ppc-next' of git://repo.or.cz/qemu/agraf
* 'ppc-next' of git://repo.or.cz/qemu/agraf:
PPC: Qdev'ify e500 pci
PPC MPC7544DS: Use new TLB helper function
PPC: Implement e500 (FSL) MMU
PPC: Add another 64 bits to instruction feature mask
PPC: Add GS MSR definition
PPC: Make MPC8544DS emulation work w/o KVM
PPC: Make MPC8544DS obey -cpu switch
Fix off-by-one error in sizing pSeries hcall table
ppc64: Fix out-of-tree builds
kvm: ppc: warn user on PAGE_SIZE mismatch
kvm: ppc: detect old headers
monitor: add PPC BookE SPRs
kvm: ppc: fixes for KVM_SET_SREGS on init
ppc64: Don't try to build sPAPR RTAS on Darwin
Place pseries vty devices at addresses more similar to existing machines
Make pSeries 'model' property more closely resemble real hardware
pseries: Increase maximum CPUs to 256
Blue Swirl [Sat, 14 May 2011 07:14:57 +0000 (07:14 +0000)]
sparc64: fix incorrect BPcc target sign extension
Fix wrong number of bits used when sign extending the branch offset of BPcc
instructions.
Reported-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Tue, 26 Apr 2011 18:44:20 +0000 (18:44 +0000)]
sparc64: fix wrpstate and wrtl on delay slot
Use TCG local to work around TCG register flush due to a branch.
Thanks to Artyom Tarasenko, Igor Kovalenko and Aurelien Jarno.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Anthony Liguori [Thu, 12 May 2011 13:08:12 +0000 (08:08 -0500)]
Merge remote-tracking branch 'stefanha/trivial-patches' into staging
Conflicts:
cpu-all.h
Anthony Liguori [Thu, 12 May 2011 13:06:06 +0000 (08:06 -0500)]
Merge remote-tracking branch 'agraf/xen-next' into staging
Alexander Graf [Mon, 30 Aug 2010 22:22:28 +0000 (00:22 +0200)]
PPC: Qdev'ify e500 pci
The e500 PCI controller isn't qdev'ified yet. This leads to severe issues
when running with -drive.
To be able to use a virtio disk with an e500 VM, let's convert the PCI
controller over to qdev.
Reviewed-by: Paul Brook <paul@codesourcery.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Fri, 6 May 2011 08:37:56 +0000 (10:37 +0200)]
PPC MPC7544DS: Use new TLB helper function
Now that we have some nice helpers that can find us a TLB entry, let's
use that on the machine initialization code, so we don't need to know
about the internals of the TLB array.
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Sat, 30 Apr 2011 21:34:58 +0000 (23:34 +0200)]
PPC: Implement e500 (FSL) MMU
Most of the code to support e500 style MMUs is already in place, but
we're missing on some of the special TLB0-TLB1 handling code and slightly
different TLB modification.
This patch adds support for the FSL style MMU.
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Sat, 30 Apr 2011 22:00:58 +0000 (00:00 +0200)]
PPC: Add another 64 bits to instruction feature mask
To enable quick runtime detection of instruction groups to the currently
selected CPU emulation, we have a feature mask of what exactly the respective
instruction supports.
This feature mask is 64 bits long and we just successfully exceeded those 64
bits. To add more features, we need to think of something.
The easiest solution that came to my mind was to simply add another 64 bits
that we can also match on. Since the comparison is only done on start of the
qemu process to generate an internal opcode calling table, we should be fine
on any performance penalties here.
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Sat, 30 Apr 2011 21:34:56 +0000 (23:34 +0200)]
PPC: Add GS MSR definition
The BookE specification defines MSR bit 28 as Guest State. Add it
to the list of MSR macros.
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Sat, 30 Apr 2011 21:34:53 +0000 (23:34 +0200)]
PPC: Make MPC8544DS emulation work w/o KVM
The MPC8544DS board emulation was only used with KVM so far, so some
parts of the code didn't provide proper values for non-KVM execution.
This patch makes the machine work without KVM enabled. To actually use
this, you also need proper e500v2 MMU emulation.
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Sat, 30 Apr 2011 21:05:03 +0000 (23:05 +0200)]
PPC: Make MPC8544DS obey -cpu switch
The MPC8544DS board emulation code ignored the user defined -cpu switch.
This patch enables it to only provide a sane default, not force an e500v2
CPU inside.
Signed-off-by: Alexander Graf <agraf@suse.de>
David Gibson [Tue, 10 May 2011 06:06:21 +0000 (16:06 +1000)]
Fix off-by-one error in sizing pSeries hcall table
The pSeries machine uses two tables to look up guest hcalls for emulation.
One of these is exactly one entry too small to hold all the hcalls it needs
to, leading to memory corruption.
This patch fixes the bug, and while we're at it, make both tables 'static'
since they're never used from other modules.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Andreas Färber [Sun, 8 May 2011 11:25:56 +0000 (13:25 +0200)]
ppc64: Fix out-of-tree builds
On ppc64 host, recursion into pc-bios/spapr-rtas/ fails for
out-of-tree builds. Add missing dir and symlink.
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Sat, 16 Apr 2011 08:15:11 +0000 (10:15 +0200)]
kvm: ppc: warn user on PAGE_SIZE mismatch
On PPC, the default PAGE_SIZE is 64kb. Unfortunately, the hardware
alignments don't match here: There are RAM and MMIO regions within
a single page when it's 64kb in size.
So the only way out for now is to tell the user that he should use 4k
PAGE_SIZE.
This patch gives the user a hint on that, telling him that failing to
register a prefix slot is most likely to be caused by mismatching PAGE_SIZE.
This way it's also more future-proof, as bigger PAGE_SIZE can easily be
supported by other machines then, as long as they stick to 64kb granularities.
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Sat, 16 Apr 2011 00:00:36 +0000 (02:00 +0200)]
kvm: ppc: detect old headers
When compiling Qemu with older kernel headers, the PVR setting
mechanism isn't available yet. Unfortunately, back then I didn't add
a capability we could check against, so all we can do is add a configure
test to see if we support PVR setting. For BookE, we don't care yet.
This fixes compilation errors with KVM enabled on older kernel headers
(like 2.6.32).
Signed-off-by: Alexander Graf <agraf@suse.de>
Scott Wood [Fri, 29 Apr 2011 22:10:23 +0000 (17:10 -0500)]
monitor: add PPC BookE SPRs
Read them via KVM_GET_SREGS in kvm_arch_get_registers(),
and display them in "info registers".
Also get CR and PID from the existing KVM_GET_REGS.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Scott Wood [Mon, 11 Apr 2011 23:34:34 +0000 (18:34 -0500)]
kvm: ppc: fixes for KVM_SET_SREGS on init
Classic/server ppc has had SREGS for a while now (though I think not
always?), but it's still missing for booke. Check the capability before
calling KVM_SET_SREGS.
Without this, booke kvm fails to boot as of commit
84b4915dd2c0eaa86c970ffc42a68ea8ba9e48b5 (kvm: Handle kvm_init_vcpu
errors).
Also, don't write random stack state into the non-PVR sregs fields --
have kvm fill it in first.
Eventually booke will have sregs and it will have its own capability to
be tested here. However, we will want a way for platform code to request
to look like the actual CPU we're running on, especially if SoC devices
are being directly assigned.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Andreas Färber [Sun, 1 May 2011 16:23:56 +0000 (18:23 +0200)]
ppc64: Don't try to build sPAPR RTAS on Darwin
The Darwin assembler fails to build it.
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
David Gibson [Tue, 19 Apr 2011 01:54:52 +0000 (11:54 +1000)]
Place pseries vty devices at addresses more similar to existing machines
Currently the qemu pseries machine numbers its virtual serial devices
from 0. However, existing pSeries machines running pHyp number them from
0x30000000.
In theory these indices are arbitrary, since everything necessary for the
kernel to find them is advertised in the device tree. However the debian
installer, at least, incorrectly looks for a device named vty@30... to
determine whether to use the hypervisor console.
Therefore this patch moves the numbers we use to match the existing pHyp
practice, in order to workaround broken userspace apps of this type.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
David Gibson [Tue, 19 Apr 2011 01:54:51 +0000 (11:54 +1000)]
Make pSeries 'model' property more closely resemble real hardware
Currently, the qemu emulated pseries machine puts
"qemu,emulated-pSeries-LPAR" in the device tree's root level 'model'
property. Unfortunately this confuses some installers and ybin, which
expect this to start with "IBM" on pSeries machines. This patch addresses
this problem, making the property more closely resemble the pattern of
existing real hardware.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Anton Blanchard [Tue, 19 Apr 2011 01:54:50 +0000 (11:54 +1000)]
pseries: Increase maximum CPUs to 256
The original pSeries machine was limited to 32 CPUs, more or less
arbitrarily. Particularly when we get SMT KVM guests it will be
pretty easy to exceed this. Therefore, raise the max number of CPUs
in a pseries machine guest to 256.
Signed-off-by: Anton Blanchard <anton@au1.ibm.com>
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Stefan Weil [Sat, 7 May 2011 20:10:53 +0000 (22:10 +0200)]
usb-linux: Add missing break statement
cppcheck report:
usb-linux.c:661: warning: Redundant assignment of "len" in switch
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Mon, 9 May 2011 07:44:03 +0000 (09:44 +0200)]
usb-musb: uninline functions
Prototype without "inline" keyword breaks the build with some gcc
versions. Noticed by Alexander Graf.
Fix this by removing the inline keywork everywhere. Some functions
can't be inlined anyway as the are referenced using function pointers.
Beside that gcc does a pretty good job on auto-inlining these days.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Richard Henderson [Wed, 4 May 2011 20:34:31 +0000 (13:34 -0700)]
irq: Privatize CPU_INTERRUPT_NMI.
This interrupt name is used by i386, CRIS, and MicroBlaze.
Copy the name into each target.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Wed, 4 May 2011 20:34:30 +0000 (13:34 -0700)]
target-i386: Privatize some i386-specific interrupt names.
SMI, VIRQ, INIT, SIPI, and MCE are all only used by the i386 port.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Wed, 4 May 2011 20:34:29 +0000 (13:34 -0700)]
target-arm: Privatize CPU_INTERRUPT_FIQ.
This interrupt name was only used by the ARM port.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Wed, 4 May 2011 20:34:28 +0000 (13:34 -0700)]
irq: Remove CPU_INTERRUPT_TIMER.
It is no longer used anywhere.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Wed, 4 May 2011 20:34:27 +0000 (13:34 -0700)]
target-sparc: Do not check CPU_INTERRUPT_TIMER.
This bit is never set, therefore we should not read it either.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Wed, 4 May 2011 20:34:26 +0000 (13:34 -0700)]
target-mips: Do not check CPU_INTERRUPT_TIMER.
This bit is never set, therefore we should not read it either.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Wed, 4 May 2011 20:34:25 +0000 (13:34 -0700)]
irq: Introduce and use CPU_INTERRUPT_SSTEP_MASK.
This mask contains all of the bits that should be ignored while single
stepping in the debugger. The mask contains 2 bits that are not currently
cleared, but are also never set. The bits are included in the mask for
consistency in handling of the CPU_INTERRUPT_TGT_EXT_N bits.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Wed, 4 May 2011 20:34:24 +0000 (13:34 -0700)]
irq: Introduce CPU_INTERRUPT_TGT_* defines.
These defines will be place-holders for cpu-specific functionality.
Generic code will, at the end of the patch series, no longer have to
concern itself about how SMI, NMI, etc should be handled. Instead,
generic code will know only that the interrupt is internal or external.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Hannes Reinecke [Mon, 2 May 2011 07:54:05 +0000 (09:54 +0200)]
lsi53c895a: Rename 'sense' to 'status'
The 'sense' field in the HBA status structure is misnamed, as it
actually carries the SCSI status. Rename it.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Paolo Bonzini [Mon, 2 May 2011 07:54:03 +0000 (09:54 +0200)]
libcacard: add correct subdirectory dependencies
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Sat, 7 May 2011 20:32:25 +0000 (22:32 +0200)]
linux-user: Replace deprecated function
Function bzero is deprecated, so replace it by function memset.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Sat, 7 May 2011 20:20:03 +0000 (22:20 +0200)]
Fix spelling in comments (intruction -> instruction)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Sun, 8 May 2011 06:58:11 +0000 (08:58 +0200)]
ac97: Remove unused local variables
cppcheck report:
hw/ac97.c:1004: style:
Variable 'written' is assigned a value that is never used
hw/ac97.c:1072: style:
Variable 'written' is assigned a value that is never used
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Thu, 28 Apr 2011 15:20:42 +0000 (17:20 +0200)]
Fix typos in comment (threshhold -> threshold, mapp -> map)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Thu, 28 Apr 2011 15:20:41 +0000 (17:20 +0200)]
Fix typo in comment (truely -> truly)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Thu, 28 Apr 2011 15:20:40 +0000 (17:20 +0200)]
Fix typo in comment (responsiblity -> responsibility)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Thu, 28 Apr 2011 15:20:39 +0000 (17:20 +0200)]
Fix typo in comment (relevent -> relevant)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Thu, 28 Apr 2011 15:20:38 +0000 (17:20 +0200)]
Fix typos in comments and code (occured -> occurred and related)
The code changed here is an unused data type name (evt_flush_occurred).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Thu, 28 Apr 2011 15:20:37 +0000 (17:20 +0200)]
Fix typos in comments (neccessary -> necessary)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Thu, 28 Apr 2011 15:20:36 +0000 (17:20 +0200)]
Fix typos in comments (instanciation -> instantiation)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Thu, 28 Apr 2011 15:20:35 +0000 (17:20 +0200)]
Fix typos in comments (interupt -> interrupt)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Thu, 28 Apr 2011 15:20:34 +0000 (17:20 +0200)]
Fix typos in comments (existance -> existence)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Thu, 28 Apr 2011 15:20:33 +0000 (17:20 +0200)]
Fix typos in comments (imediately -> immediately)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Thu, 28 Apr 2011 15:20:32 +0000 (17:20 +0200)]
Fix typo in comment (dieing -> dying)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Thu, 28 Apr 2011 15:20:31 +0000 (17:20 +0200)]
Fix typo in comment (consistant -> consistent)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Thu, 28 Apr 2011 15:20:30 +0000 (17:20 +0200)]
Fix typo in comment (embeded -> embedded)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Thu, 28 Apr 2011 15:20:29 +0000 (17:20 +0200)]
Fix typo in comment (auxilliary -> auxiliary)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Thu, 28 Apr 2011 15:20:28 +0000 (17:20 +0200)]
Fix typo in comment (colum -> column)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Thu, 28 Apr 2011 15:20:27 +0000 (17:20 +0200)]
Fix typos in comments (accessable -> accessible, priveleged -> privileged)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Thu, 28 Apr 2011 15:20:26 +0000 (17:20 +0200)]
Fix typos in comments (accross -> across)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Thu, 28 Apr 2011 15:20:25 +0000 (17:20 +0200)]
Fix typos in comments (dependancy -> dependency)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Anthony PERARD [Tue, 5 Oct 2010 15:40:22 +0000 (16:40 +0100)]
xen: Add Xen hypercall for sleep state in the cmos_s3 callback.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Anthony PERARD [Mon, 6 Sep 2010 19:07:33 +0000 (20:07 +0100)]
xen: Set running state in xenstore.
This tells to the xen management tool that the machine can begin run.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Arun Sharma [Mon, 6 Sep 2010 19:07:14 +0000 (20:07 +0100)]
xen: Initialize event channels and io rings
Open and bind event channels; map ioreq and buffered ioreq rings.
Signed-off-by: Arun Sharma <arun.sharma@intel.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Anthony PERARD [Thu, 22 Jul 2010 14:52:48 +0000 (15:52 +0100)]
vl.c: Introduce getter for shutdown_requested and reset_requested.
Introduce two functions qemu_shutdown_requested_get and
qemu_reset_requested_get to get the value of shutdown/reset_requested
without reset it.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
John Baboval [Tue, 22 Mar 2011 14:52:09 +0000 (14:52 +0000)]
pci: Use of qemu_put_ram_ptr in pci_add_option_rom.
Prevent a deadlock caused by leaving a map cache bucket locked by the
preceding qemu_get_ram_ptr() call.
Signed-off-By: John Baboval <john.baboval@virtualcomputer.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Anthony PERARD [Thu, 21 Oct 2010 11:47:08 +0000 (12:47 +0100)]
configure: Always use 64bits target physical addresses with xen enabled.
With MapCache, we can handle a 64b target, even with a 32b host/qemu.
So, we need to have target_phys_addr_t to 64bits.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Anthony PERARD [Thu, 16 Sep 2010 12:57:49 +0000 (13:57 +0100)]
Introduce qemu_put_ram_ptr
This function allows to unlock a ram_ptr give by qemu_get_ram_ptr. After
a call to qemu_put_ram_ptr, the pointer may be unmap from QEMU when
used with Xen.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
John Baboval [Tue, 22 Mar 2011 14:50:28 +0000 (14:50 +0000)]
xen: Adds a cap to the number of map cache entries.
Adds a cap to the number of map cache entries. This prevents the map
cache from overwhelming system memory.
I also removed the bitmap macros and #included bitmap.h instead.
Signed-off-By: John Baboval <john.baboval@virtualcomputer.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Jun Nakajima [Tue, 31 Aug 2010 15:41:25 +0000 (16:41 +0100)]
xen: Introduce the Xen mapcache
On IA32 host or IA32 PAE host, at present, generally, we can't create
an HVM guest with more than 2G memory, because generally it's almost
impossible for Qemu to find a large enough and consecutive virtual
address space to map an HVM guest's whole physical address space.
The attached patch fixes this issue using dynamic mapping based on
little blocks of memory.
Each call to qemu_get_ram_ptr makes a call to qemu_map_cache with the
lock option, so mapcache will not unmap these ram_ptr.
Blocks that do not belong to the RAM, but usually to a device ROM or to
a framebuffer, are handled in a separate function. So the whole RAMBlock
can be map.
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Anthony PERARD [Wed, 30 Jun 2010 16:50:10 +0000 (17:50 +0100)]
xen: Introduce Xen Interrupt Controller
Every set_irq call makes a Xen hypercall.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>