Merge tag 'drm-intel-next-2021-01-12' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- PSR fixes and improvements for selective fetch (Jose)
- GVT build fixed and cleanup (Jani)
- RKL display fixes (Lee, Matt)
- DSI fix (Hans)
- Panel Power and Backlight fixes (Anshuman, Jani)
- RPM fix (Chris)
- Fix HTI port checking (Jose)
- Clean-up in cursor code (Ville)
- Once again, trying to use fast+narrow link on eDP (Ville)
- DG1 display fix (Matt)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112175151.GA90999@intel.com

Merge tag 'amd-drm-next-5.12-2021-01-08' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.12-2021-01-08:

amdgpu:
- Rework IH ring handling on vega and navi
- Rework HDP handling for vega and navi
- swSMU documenation updates
- Overdrive support for Sienna Cichlid and newer asics
- swSMU updates for vangogh
- swSMU updates for renoir
- Enable FP16 on DCE8-11
- Misc code cleanups and bug fixes

radeon:
- Fixes for platforms that can't access PCI resources correctly
- Misc code cleanups

From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108221811.3868-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/i915/dg1: Update voltage swing tables for DP

DG1's vswing tables are the same for eDP and HDMI but have slight
differences from ICL/TGL for DP.

v2:
 - Use a "_hbr2_hbr3" suffix on the table name to make it more clear
   that the same table is used for both HBR2 and HBR3 link rates.
   (Swathi)

Bspec: 49291
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108222528.1954514-1-matthew.d.roper@intel.com
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>

drm/i915: Try to use fast+narrow link on eDP again and fall back to the old max strategy on failure

Some new eDP panels don't like to operate at the max parameters, and
instead we need to go for an optimal confiugration. That unfortunately
doesn't work with older eDP panels which are generally only guaranteed
to work at the max parameters.

To solve these two conflicting requirements let's start with the optimal
setup, and if that fails we start again with the max parameters. The
downside is probably an extra modeset when we switch strategies but
I don't see a good way to avoid that.

For a bit of history we first tried to go for the fast+narrow in
commit 7769db588384 ("drm/i915/dp: optimize eDP 1.4+ link config
fast and narrow"). but that had to be reverted due to regression
on older panels in commit f11cb1c19ad0 ("drm/i915/dp: revert back
to max link rate and lane count on eDP"). So now we try to get
the best of both worlds by using both strategies.

v2: Deal with output_bpp and uapi vs. hw state split
    Reword some comments
v3: Rebase

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Albert Astals Cid <aacid@kde.org> # v5.0 backport
Cc: Emanuele Panigati <ilpanich@gmail.com> # v5.0 backport
Cc: Matteo Iervasi <matteoiervasi@gmail.com> # v5.0 backport
Cc: Timo Aaltonen <tjaalton@ubuntu.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=105267
References: https://bugs.freedesktop.org/show_bug.cgi?id=109959
References: https://gitlab.freedesktop.org/drm/intel/issues/272
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210107182026.24848-1-ville.syrjala@linux.intel.com

drm/i915: Fix checkpatch warns in cursor code

Eliminate checkpatch warnings from intel_cursor.c:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Possible repeated word: 'by'

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110175624.3524-2-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/i915: Fix HTI port checking

There was some misinterpretation of specification, when DDIX_USED is
set, the next bit means 0 for DP and 1 for HDMI.

Anyways this misinterpretation is not causing any issues, this change
is just to comply with specification.
Also as for us it do not matters if it is HDMI or DP, not checking the
port type that HTI is using.

Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108134802.21280-1-jose.souza@intel.com

drm/i915/backlight: fix CPU mode backlight takeover on LPT

The pch_get_backlight(), lpt_get_backlight(), and lpt_set_backlight()
functions operate directly on the hardware registers. If inverting the
value is needed, using intel_panel_compute_brightness(), it should only
be done in the interface between hardware registers and
panel->backlight.level.

The CPU mode takeover code added in commit 5b1ec9ac7ab5
("drm/i915/backlight: Fix backlight takeover on LPT, v3.") reads the
hardware register and converts to panel->backlight.level correctly,
however the value written back should remain in the hardware register
"domain".

This hasn't been an issue, because GM45 machines are the only known
users of i915.invert_brightness and the brightness invert quirk, and
without one of them no conversion is made. It's likely nobody's ever hit
the problem.

Fixes: 5b1ec9ac7ab5 ("drm/i915/backlight: Fix backlight takeover on LPT, v3.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org> # v5.1+
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108152841.6944-1-jani.nikula@intel.com

drm/i915: Disable RPM wakeref assertions during driver shutdown

As with the regular suspend paths, also disable the wakeref assertions
as we disable the driver during shutdown.

Reported-by: Hans de Goede <hdegoede@redhat.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2899
Fixes: fe0f1e3bfdfe ("drm/i915: Shut down displays gracefully on reboot")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210104203905.19248-1-chris@chris-wilson.co.uk

drm/amdgpu: fix DRM_INFO flood if display core is not supported (bug 210921)

This fix bug 210921 where DRM_INFO floods log when hitting an unsupported ASIC in
amdgpu_device_asic_has_dc_support(). This info should be only called once.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=210921
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu/display: fix build with CONFIG_DRM_AMD_DC_DCN disabled

dc_allow_idle_optimizations() needs to be protected by
CONFIG_DRM_AMD_DC_DCN.

Fixes: 71338cb4a7c2 ("drm/amd/display: enable idle optimizations for linux (MALL stutter)")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: modify the fine grain tuning function for Renoir

This patch is to improve the fine grain tuning function for Renoir.
The fine grain tuning function uses the sysfs node -- pp_od_clk_voltage
to config gfxclk. Meanwhile, another sysfs
node -- power_dpm_force_perfomance_level also affects the gfx clk.
It will cause confusion when these two sysfs nodes works
together.
And the flag "od_enabled" is used to control the overdrive function for
dGPU, like navi10, navi14 and navi21.
APU like Renior or Vangogh uses this "od_enabled" to configure
the frequency range of gfx clock, but the max value of frequency
range will not be higher than the safe limit, it is not "overdrive".
So this patch adds two new flags -- "fine_grain_enabled" and
"fine_grain_started" to avoid this confusion, the flag will
make these two sysfs nodes work separately.
The flag "fine_grain_enabled" is set as "enabled" by default,
so the fine grain tuning function will be enabled by default.
But the flag "fine_grain_started" is set as "false" by default,
so the fine grain function will not take effect until it is set as
"true".
Only when power_dpm_force_perfomance_level is changed to
"manual" mode, the flag "fine_grain_started" will be set as "true",
and the fine grain tuning function will be started.
In other profile modes, including "auto", "high", "low", "profile_peak",
"profile_standard", "profile_min_sclk", "profile_min_mclk",
the flag "fine_grain_started" will be set as "false", and the od range of
fine grain tuning function will be restored default value.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add the parameters of power profiles for vangogh

This pacth is to add the parameters of power profiles for vangogh,
includeing "profile_peak", "profile_standard", "profile_min_sclk",
"profile_min_mclk".

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/psp: fix psp gfx ctrl cmds

psp GFX_CTRL_CMD_ID_CONSUME_CMD different for windows and linux,
according to psp, linux cmds are not correct.

v2: only correct GFX_CTRL_CMD_ID_CONSUME_CMD.

Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: check more client ids in interrupt handler

Add check for SExSH clients in kfd interrupt handler.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Correct the read sclk for navi10

According to hw, after navi10,it runs in dfll mode, and should
read sclk from AverageGfxclkFrequency.

Signed-off-by: Emily.Deng <Emily.Deng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add new mode 2560x1440

Add one more 2k resolution which appears frequently in market.

Signed-off-by: Emily.Deng <Emily.Deng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/i915/pps: Reuse POWER_DOMAIN_DISPLAY_CORE in pps_{lock, unlock}

We need a power_domain wakeref in pps_{lock,unlock} to prevent
a race while resetting pps state in intel_power_sequencer_reset().

intel_power_sequencer_reset() need a pps_mutex to access pps_pipe
but it can't grab pps_mutex due to deadlock with power_well
functions are called while holding pps_mutex.
intel_power_sequencer_reset() is called by power_well function
associated with legacy platforms like vlv and chv therefore re-use
the POWER_DOMAIN_DISPLAY_CORE power domain, which only used
by vlv and chv display power domain.

This will avoids the unnecessary noise of unrelated power wells
in pps_{lock,unlock}.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210107112500.16216-1-anshuman.gupta@intel.com

Merge drm/drm-next into drm-intel-next

sync-up to not fall too much behind.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge tag 'drm-misc-next-2021-01-06' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.12:

Core Changes:
- Lots of drm documentation updates by Simor Ser.
- Require that each crtc has a unique primary plane.
- Add fixme that fbdev_generic_setup is confusing.

Driver Changes:
- Update addresses for TI display drivers maintainers.
- Make DRM_VIRTIO_GPU select VIRTIO.
- Small fixes to qxl, virtio, hisilicon, tve200, panel/s6e63m0.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fdfbfd7a-b91d-3f59-11c8-984704ce0ee1@linux.intel.com

Merge tag 'du-next-20210105' of git://linuxtv.org/pinchartl/media into drm-next

- Add default modes for connectors in unknown state
- R-Car DU conversion to DRM-managed API
- R-Car DU miscellaneous fixes
- Miscellaneous bridge and bridge bindings fixes
- Assorted misc driver cleanups
- Constify drm_driver for PCI devices

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/X/P8IOrVXkTpLeCm@pendragon.ideasonboard.com

Merge tag 'drm-intel-next-2021-01-04' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Display hotplug fix for gen2/gen3 (Chris)
- Remove trailing semicolon (Tom)
- Suppress display warnings for old ifwi presend on our CI (Chris)
- OA/Perf related workaround (Lionel)
- Replace I915_READ/WRITE per new uncore and display read/write functions (Jani)
- PSR improvements (Jose)
- HDR and other color changes on LSPCON (Uma, Ville)
- FBC fixes for TGL (Uma)
- Record plane update times for debugging (Chris)
- Refactor panel backlight control functions (Dave)
- Display power improvements (Imre)
- Add VRR register definition (Manasi)
- Atomic modeset improvements for bigjoiner pipes (Ville)
- Switch off the scanout during driver unregister (Chris)
- Clean-up DP's FEW enable (Manasi)
- Fix VDSCP slice count (Manasi)
- Fix and clean up around rc_model_size for DSC (Jani)
- Remove Type-C noisy debug warn message (Sean)
- Display HPD code clean-up (Ville)
- Refactor Intel Display (Dave)
- Start adding support for Intel's eDP backlight controls (Lyude)

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210104211018.GA1094707@intel.com

drm/i915/dsi: Use unconditional msleep for the panel_on_delay when there is no reset-deassert MIPI-sequence

Commit 25b4620ee822 ("drm/i915/dsi: Skip delays for v3 VBTs in vid-mode")
added an intel_dsi_msleep() helper which skips sleeping if the
MIPI-sequences have a version of 3 or newer and the panel is in vid-mode;
and it moved a bunch of msleep-s over to this new helper.

This was based on my reading of the big comment around line 730 which
starts with "Panel enable/disable sequences from the VBT spec.",
where the "v3 video mode seq" column does not have any wait t# entries.

Given that this code has been used on a lot of different devices without
issues until now, it seems that my interpretation of the spec here is
mostly correct.

But now I have encountered one device, an Acer Aspire Switch 10 E
SW3-016, where the panel will not light up unless we do actually honor the
panel_on_delay after exexuting the MIPI_SEQ_PANEL_ON sequence.

What seems to set this model apart is that it is lacking a
MIPI_SEQ_DEASSERT_RESET sequence, which is where the power-on
delay usually happens.

Fix the panel not lighting up on this model by using an unconditional
msleep(panel_on_delay) instead of intel_dsi_msleep() when there is
no MIPI_SEQ_DEASSERT_RESET sequence.

Fixes: 25b4620ee822 ("drm/i915/dsi: Skip delays for v3 VBTs in vid-mode")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201118124058.26021-1-hdegoede@redhat.com

Merge tag 'imx-drm-next-2021-01-04' of git://git.pengutronix.de/git/pza/linux into drm-next

drm/imx: fixes and drm managed resources

- Reduce stack usage in ipu-di.
- Fix imx-ldb for compile tests.
- Make drm encoder control functions optional.
- Add drm managed variants drmm_encoder_alloc(),
  drmm_simple_encoder_alloc(), drmm_universal_plane_alloc(), and
  drmm_crtc_alloc_with_planes() for drm_encoder_init(),
  drm_simple_encoder_init(), drm_universal_plane_init(), and
  drm_crtc_init_with_planes(), respectively.
- Update imx-drm to use the new functions for drm managed resource
  allocation, moving initialization from bind to probe where possible.
- Fix imx-tve clock provider leak.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
[danvet: Fix conflict between doc changes by both Philipp and Simon
Ser, see 9999587b684f ("drm: rework description of primary and cursor
planes")]
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/c745fc1596898932c9454fd2979297b4242566a2.camel@pengutronix.de

Merge tag 'topic/dp-hdmi-2.1-pcon-2020-12-23' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Add support for DP-HDMI2.1 PCON

From the series cover letter:

This patch series attempts to add support for a DP-HDMI2.1 Protocol
Convertor. The VESA spec for the HDMI2.1 PCON are proposed in Errata
E5 to DisplayPort_v2.0:
https://vesa.org/join-vesamemberships/member-downloads/?action=stamp&fileid=42299
The details are mentioned in:
VESA DP-to-HDMI PCON Specification Standalone Document
https://groups.vesa.org/wg/DP/document/15651

This series starts with adding support for FRL (Fixed Rate Link)
Training between the PCON and HDMI2.1 sink.
As per HDMI2.1 specification, a new data-channel or lane is added in
FRL mode, by repurposing the TMDS clock Channel. Through FRL, higher
bit-rate can be supported, ie. up to 12 Gbps/lane (48 Gbps over 4
lanes).

With these patches, the HDMI2.1 PCON can be configured to achieve FRL
training based on the maximum FRL rate supported by the panel, source
and the PCON.
The approach is to add the support for FRL training between PCON and
HDMI2.1 sink and gradually add other blocks for supporting higher
resolutions and other HDMI2.1 features, that can be supported by pcon
for the sources that do not natively support HDMI2.1.

This is done before the DP Link training between the source and PCON
is started. In case of FRL training is not achieved, the PCON will
work in the regular TMDS mode, without HDMI2.1 feature support.
Any interruption in FRL training between the PCON and HDMI2.1 sink is
notified through IRQ_HPD. On receiving the IRQ_HPD the concerned DPCD
registers are read and FRL training is re-attempted.

Currently, we have tested the FRL training and are able to enable 4K
display with TGL Platform + Realtek PCON RTD2173 with HDMI2.1 supporting
panel.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87lfdpndkt.fsf@intel.com

Merge tag 'drm-misc-next-2020-12-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.12:

UAPI Changes:
- Not necessarily one, but we document that userspace needs to force probe connectors.

Cross-subsystem Changes:
- Require FB_ATY_CT for aty on sparc64.
- video: Fix documentation, and a few compiler warnings.
- Add devicetree bindings for DP connectors.
- dma-buf: Update kernel-doc, and add might_lock for resv objects in begin/end_cpu_access.

Core Changes:
- ttm: Warn when releasing a pinned bo.
- ttm: Cleanup bo size handling.
- cma-helper: Remove prime infix, and implement mmap as GEM CMA functions.
- Split drm_prime_sg_to_page_addr_arrays into 2 functions.
- Add a new api to install irq using devm.
- Update panel kerneldoc to inline style.
- Add DP support to drm/bridge.
- Assorted small fixes to ttm, fb-helper, scheduler.
- Add atomic_commit_setup function callback.
- Automatically use the atomic gamma_set, instead of forcing drivers to declare the default atomic version.
- Allow using degamma for legacy gamma if gamma is not available.
- Clarify that primary/cursor planes are not tied to 1 crtc (depending on possible_crtcs).
- ttm: Cleanup the lru handler.

Driver Changes:
- Add pm support to ingenic.
- Assorted small fixes in radeon, via, rockchip, omap2fb, kmb, gma500, nouveau, virtio, hisilicon, ingenic, s6e63m0 panel, ast, udlfb.
- Add BOE NV110WTM-N61, ys57pss36bh5gq, Khadas TS050 panels.
- Stop using pages with drm_prime_sg_to_page_addr_arrays, and switch all callers to use ttm_sg_tt_init.
- Cleanup compiler and docbook warnings in a lot of fbdev devices.
- Use the drmm_vram_helper in hisilicon.
- Add support for BCM2711 DSI1 in vc4.
- Add support for 8-bit delta RGB panels to ingenic.
- Add documentation on how to test vkms.
- Convert vc4 to atomic helpers.
- Use degamma instead of gamma table in omap, to add support for CTM and color encoding/range properties.
- Rework omap DSI code, and merge all omapdrm modules now that the last omap panel is now a drm panel.
- More refactoring of omap dsi code.
- Enable 10/12 bpc outputs in vc4.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/78381a4f-45fd-aed4-174a-94ba051edd37@linux.intel.com

drm/i915/rkl: Add DP vswing programming tables

The bspec has been updated with new vswing programming for RKL DP.  No
data is provided for HDMI or eDP, so for now we'll continue to assume
that those are the same as TGL.

Bspec: 49291
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218040535.45492-1-matthew.d.roper@intel.com
Reviewed-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>

Revert "drm/amd/display: Fix memory leaks in S3 resume"

This reverts commit a135a1b4c4db1f3b8cbed9676a40ede39feb3362.

This leads to blank screens on some boards after replugging a
display.  Revert until we understand the root cause and can
fix both the leak and the blank screen after replug.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211033
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1427
Cc: Stylon Wang <stylon.wang@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Andre Tomt <andre@tomt.net>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/i915/rkl: new rkl ddc map for different PCH

After boot into kernel. Driver configured ddc pin mapping based on
predefined table in parse_ddi_port(). Now driver configure rkl
ddc pin mapping depends on icp_ddc_pin_map[]. Then this table will
give incorrect gmbus port number to cause HDMI can't work.

Refer to commit cd0a89527d06 ("drm/i915/rkl: Add DDC pin mapping").
Create two ddc pin table for rkl TGP and CMP pch. Then HDMI can
works properly on rkl.

v2: update patch based on latest dinq branch.
v3: update ddc table for RKL+TGP sku.
    RKL+CNP sku will load cnp_ddc_pin_map[] setting.
v4: modify the if/else judgment to avoid nesting.
v5: fix typo in v4.

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Khaled Almahallawy <khaled.almahallawy@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2577
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117142629.28729-1-shawn.c.lee@intel.com

Merge tag 'gvt-next-fixes-2020-12-25' of https://github.com/intel/gvt-linux into drm-intel-next

gvt-next-fixes-2020-12-25

- Avoid one useless inline (Jani)
- make gvt header self-contained, fix CONFIG_DRM_I915_WERROR (Jani)

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201225022009.GF16939@zhen-hp.sh.intel.com

drm/amdgpu: Add check to prevent IH overflow

Similar to commit <b82175750131>("drm/amdgpu: fix IH overflow on Vega10 v2").
When an ring buffer overflow happens the appropriate bit is set in the WPTR
register which is also written back to memory. But clearing the bit in the
WPTR doesn't trigger another memory writeback.

So what can happen is that we end up processing the buffer overflow over and
over again because the bit is never cleared. Resulting in a random system
lockup because of an infinite loop in an interrupt handler.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Defang Bo <bodefang@126.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: drop DCN support for aarch64

From Ard:

"Simply disabling -mgeneral-regs-only left and right is risky, given that
the standard AArch64 ABI permits the use of FP/SIMD registers anywhere,
and GCC is known to use SIMD registers for spilling, and may invent
other uses of the FP/SIMD register file that have nothing to do with the
floating point code in question. Note that putting kernel_neon_begin()
and kernel_neon_end() around the code that does use FP is not sufficient
here, the problem is in all the other code that may be emitted with
references to SIMD registers in it.

So the only way to do this properly is to put all floating point code in
a separate compilation unit, and only compile that unit with
-mgeneral-regs-only."

Disable support until the code can be properly refactored to support this
properly on aarch64.

Acked-by: Will Deacon <will@kernel.org>
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable ras eeprom support for sienna cichlid

added I2C address and asic support flag

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix no bad_pages issue after umc ue injection

old code wrongly used the bad page status as the function return value,
which cause amdgpu_ras_badpages_read always return failed.

Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix potential memory leak during navi12 deinitialization

Navi12 HDCP & DTM deinitialization needs continue to free bo if already
created though initialized flag is not set.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable fp16 also on DCE-8/10/11.

The hw supports fp16, this is not only useful for HDR,
but also for standard dynamic range displays, because
it allows to get more precise color reproduction with
about 11 - 12 bpc linear precision in the unorm range
0.0 - 1.0.

Working fp16 scanout+display (and HDR over HDMI) was
verified on a DCE-8 asic, so i assume that the more
recent DCE-10/11 will work equally well, now that
format-specific plane scaling constraints are properly
enforced, e.g., the inability of fp16 to scale on older
hw like DCE-8 to DCE-11.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check plane scaling against format specific hw plane caps.

This takes hw constraints specific to pixel formats into account,
e.g., the inability of older hw to scale fp16 format framebuffers.

It should now allow safely to enable fp16 formats also on DCE-8,
DCE-10, DCE-11.0

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: take runtime pm reference when we attach a buffer

And drop it when we detach.  If the shared buffer is in vram,
we need to make sure we don't put the device into runtime
suspend.

Acked-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Create and Destroy PSR resources for DCN302

We need these to support PSR on DCN302

Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: enable idle optimizations for linux (MALL stutter)

[Why]
We can only use this feature when the display is idle. When active vblank
irq count is 0 we know all the displays are idle.

[How]
-Add a active vblank irq counter
-Update the counter when we enable/disable vblank irq
-if vblank irq count is 0 we can consider mall stutter

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nick Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update idle optimization handling

[How]
 - use dc interface instead of hwss interface in cursor functions, to keep
dc->idle_optimizations_allowed updated
 - add dc interface to check if idle optimizations might apply to a plane

Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix unused variable warning

Some of the newly added code is hidden inside of #ifdef
blocks, but one variable is unused when debugfs is disabled:

drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8370:8: error: unused variable 'configure_crc' [-Werror,-Wunused-variable]

Change the #ifdef to an if(IS_ENABLED()) check to fix the warning
and avoid adding more #ifdefs.

Fixes: c920888c604d ("drm/amd/display: Expose new CRC window property")
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix comparison pointer to bool warning in dc.c

Fixes coccicheck warning:
drivers/gpu/drm/amd/display/dc/core/dc.c:1543:12-19: WARNING: Comparison
to bool
drivers/gpu/drm/amd/display/dc/core/dc.c:1496:14-42: WARNING: Comparison
to bool
drivers/gpu/drm/amd/display/dc/core/dc.c:971:15-48: WARNING: Comparison
to bool
drivers/gpu/drm/amd/display/dc/core/dc.c:976:15-44: WARNING: Comparison
to bool

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix macro name _AMDGPU_TRACE_H_ in preprocessor if condition

Add an underscore in amdgpu_trace.h line 24 "_AMDGPU_TRACE_H".

Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Chenyang Li <lichenyang@loongson.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

gpu/drm/radeon: use DIV_ROUND_UP macro to do calculation

Don't open-code DIV_ROUND_UP() kernel macro.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove useless else if

Fix the following coccinelle report:
drivers/gpu/drm/amd/display/dc/dcn302/dcn302_resource.c:1357:6-8:
WARNING: possible condition with no effect (if == else)

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused including <linux/version.h>

Remove including <linux/version.h> that don't need it.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: improve the fine grain tuning function for RV/RV2/PCO

This patch is to improve the fine grain tuning function for RV/RV2/PCO.
The fine grain tuning function uses the sysfs node -- pp_od_clk_voltage
to config gfxclk. Meanwhile, another sysfs
node -- power_dpm_force_perfomance_level also affects the gfx clk.
It will cause confusion when these two sysfs nodes works
together. So this patch adds one flag to avoid this confusion, the flag
will make these two sysfs nodes work separately.
The flag is set as "disabled" by default, so the fine grain tuning function
will be disabled by default.
Only when power_dpm_force_perfomance_level is changed to
"manual" mode, the flag will be set as "enabled",
and the fine grain tuning function will be enabled.
In other profile modes, including "auto", "high", "low",
"profile_peak", "profile_standard", "profile_min_sclk",
"profile_min_mclk", the flag will be set as "disabled",
and the od range of fine grain tuning function will
be restored default value.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: enable dclk/vclk dpm function in "auto" power profile for vangogh

This patch is to enable dclk/vclk dpm function in "auto" power profile
for vangogh.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: do optimization for psp command submit

In the psp command submit logic,
the function msleep(1) delayed too long,
Changing it to usleep_range(10, 100) to
have a better performance.

Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fix the failure when change power profile for renoir

This patch is to fix the failure when change power profile to
"profile_peak" for renoir.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove redundant include of navi10_enum

Remove unnecessary include of navi10_enum header file.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove redundant logic related HDP

Remove hdp_flush function from amdgpu_nbio struct as it have been unified
into hdp struct.
Remove the include about hdp register which was not used.
V2: Remove hdp golden setting which is unnecessary.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: switch hdp callback functions for hdp v5

Switch to use the HDP functions which unified on hdp structure instead of
the scattered hdp callback functions.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: switch hdp callback functions for hdp v4

Switch to use the HDP functions which unified on hdp structure instead of
the scattered hdp callback functions.
V2: clean up hdp reset ras error count function.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add hdp version 5 functions

Unify hdp related function into hdp structure for hdp version 5.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add hdp version 4 functions

Unify hdp related function into hdp structure for hdp version 4.
V2: Add function to remap hdp registers for nbio version 6.1

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add amdgpu_hdp structure

amdgpu_hdp hold all the callbacks for hdp

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix potential NULL pointer when check_atom_bios() fails

Asic funcs pointer needs being checked whether is NULL. Because when
check_atom_bios() fails in req_init_data handshake, asic funcs pointer
is not initialized yet.

Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use GTT for uvd_get_create/destory_msg

On modern gpus, GTT (system memory) works as well here, and this may
also be a workaround for platforms which cannot map vram correctly.

Signed-off-by: chenli <chenli@uniontech.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: use writel to avoid gcc optimization v3

When using e8860(gcn1) on arm64, the kernel crashed on drm/radeon:

[   11.240414] pc : __memset+0x4c/0x188
[   11.244101] lr : radeon_uvd_get_create_msg+0x114/0x1d0 [radeon]
[   11.249995] sp : ffff00000d7eb700
[   11.253295] x29: ffff00000d7eb700 x28: ffff8001f632a868
[   11.258585] x27: 0000000000040000 x26: ffff00000de00000
[   11.263875] x25: 0000000000000125 x24: 0000000000000001
[   11.269168] x23: 0000000000000000 x22: 0000000000000005
[   11.274459] x21: ffff00000df24000 x20: ffff8001f74b4000
[   11.279753] x19: 0000000000124000 x18: 0000000000000020
[   11.285043] x17: 0000000000000000 x16: 0000000000000000
[   11.290336] x15: ffff000009309000 x14: ffffffffffffffff
[   11.290340] x13: ffff0000094b6f88 x12: ffff0000094b6bd2
[   11.290343] x11: ffff00000d7eb700 x10: ffff00000d7eb700
[   11.306246] x9 : ffff00000d7eb700 x8 : ffff00000df2402c
[   11.306254] x7 : 0000000000000000 x6 : ffff0000094b626a
[   11.306257] x5 : 0000000000000000 x4 : 0000000000000004
[   11.306262] x3 : ffffffffffffffff x2 : 0000000000000fd4
[   11.306265] x1 : 0000000000000000 x0 : ffff00000df2402c
[   11.306272] Call trace:
[   11.306316]  __memset+0x4c/0x188
[   11.306638]  uvd_v1_0_ib_test+0x70/0x1c0 [radeon]
[   11.306758]  radeon_ib_ring_tests+0x54/0xe0 [radeon]
...

Obviously, the __memset call is generated by gcc(8.3.1). It optimizes
this for loop into memset. But this may break on some platforms which
cannot map device memory correctly. So, just invoke `writel` to handle this.

v3 (chk): minor cleanups in code and commit message

Signed-off-by: Chen Li <chenli@uniontech.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix a GPU hang issue when remove device

When GFXOFF is enabled and GPU is idle, driver will fail to access some
registers. Therefore change to disable power gating before all access
registers with MMIO.

Dmesg log is as following:
amdgpu 0000:03:00.0: amdgpu: amdgpu: finishing device.
amdgpu: cp queue pipe 4 queue 0 preemption failed
amdgpu 0000:03:00.0: amdgpu: failed to write reg 2890 wait reg 28a2
amdgpu 0000:03:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706
amdgpu 0000:03:00.0: amdgpu: failed to write reg 2890 wait reg 28a2
amdgpu 0000:03:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706

Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix a memory protection fault when remove amdgpu device

ASD and TA share the same firmware in SIENNA_CICHLID and only TA
firmware is requested during boot, so only need release TA firmware when
remove device.

[   83.877150] general protection fault, probably for non-canonical address 0x1269f97e6ed04095: 0000 [#1] SMP PTI
[   83.888076] CPU: 0 PID: 1312 Comm: modprobe Tainted: G        W  OE     5.9.0-rc5-deli-amd-vangogh-0.0.6.6-114-gdd99d5669a96-dirty #2
[   83.901160] Hardware name: System manufacturer System Product Name/TUF Z370-PLUS GAMING II, BIOS 0411 09/21/2018
[   83.912353] RIP: 0010:free_fw_priv+0xc/0x120
[   83.917531] Code: e8 99 cd b0 ff b8 a1 ff ff ff eb 9f 4c 89 f7 e8 8a cd b0 ff b8 f4 ff ff ff eb 90 0f 1f 00 0f 1f 44 00 00 55 48 89 e5 41 54 53 <4c> 8b 67 18 48 89 fb 4c 89 e7 e8 45 94 41 00 b8 ff ff ff ff f0 0f
[   83.937576] RSP: 0018:ffffbc34c13a3ce0 EFLAGS: 00010206
[   83.943699] RAX: ffffffffbb681850 RBX: ffffa047f117eb60 RCX: 0000000080800055
[   83.951879] RDX: ffffbc34c1d5f000 RSI: 0000000080800055 RDI: 1269f97e6ed04095
[   83.959955] RBP: ffffbc34c13a3cf0 R08: 0000000000000000 R09: 0000000000000001
[   83.968107] R10: ffffbc34c13a3cc8 R11: 00000000ffffff00 R12: ffffa047d6b23378
[   83.976166] R13: ffffa047d6b23338 R14: ffffa047d6b240c8 R15: 0000000000000000
[   83.984295] FS:  00007f74f6712540(0000) GS:ffffa047fbe00000(0000) knlGS:0000000000000000
[   83.993323] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   84.000056] CR2: 0000556a1cca4e18 CR3: 000000021faa8004 CR4: 00000000003706f0
[   84.008128] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   84.016155] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   84.024174] Call Trace:
[   84.027514]  release_firmware.part.11+0x4b/0x70
[   84.033017]  release_firmware+0x13/0x20
[   84.037803]  psp_sw_fini+0x77/0xb0 [amdgpu]
[   84.042857]  amdgpu_device_fini+0x38c/0x5d0 [amdgpu]
[   84.048815]  amdgpu_driver_unload_kms+0x43/0x70 [amdgpu]
[   84.055055]  drm_dev_unregister+0x73/0xb0 [drm]
[   84.060499]  drm_dev_unplug+0x28/0x30 [drm]
[   84.065598]  amdgpu_dev_uninit+0x1b/0x40 [amdgpu]
[   84.071223]  amdgpu_pci_remove+0x4e/0x70 [amdgpu]
[   84.076835]  pci_device_remove+0x3e/0xc0
[   84.081609]  device_release_driver_internal+0xfb/0x1c0
[   84.087558]  driver_detach+0x4d/0xa0
[   84.092041]  bus_remove_driver+0x5f/0xe0
[   84.096854]  driver_unregister+0x2f/0x50
[   84.101594]  pci_unregister_driver+0x22/0xa0
[   84.106806]  amdgpu_exit+0x15/0x2b [amdgpu]

Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: switched to cached noretry setting for vangogh

global noretry setting is cached to gmc.noretry

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove unnecessary asic check for sdma5.2

For sdma5.2, all sdma instances will share the same fw,
remove unnecessary asic check to be more generic.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix sysfs amdgpu_current_backlight_pwm NULL pointer issue

fix NULL pointer issue when read sysfs amdgpu_current_backlight_pwm sysfs node.

Call Trace:
[  248.273833] BUG: kernel NULL pointer dereference, address: 0000000000000130
[  248.273930] #PF: supervisor read access in kernel mode
[  248.273993] #PF: error_code(0x0000) - not-present page
[  248.274054] PGD 0 P4D 0
[  248.274092] Oops: 0000 [#1] SMP PTI
[  248.274138] CPU: 2 PID: 1377 Comm: cat Tainted: G           OE     5.9.0-rc5-drm-next-5.9+ #1
[  248.274233] Hardware name: System manufacturer System Product Name/Z170-A, BIOS 3802 03/15/2018
[  248.274641] RIP: 0010:dc_link_get_backlight_level+0x5/0x70 [amdgpu]
[  248.274718] Code: 67 ff ff ff 41 b9 03 00 00 00 e9 45 ff ff ff d1 ea e9 55 ff ff ff 0f 1f 44 00 00 66 2e
0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <48> 8b 87 30 01 00 00 48 8b 00 48 8b 88 88 03 00 00 48 8d 81 e8 01
[  248.274919] RSP: 0018:ffffb5ad809b3df0 EFLAGS: 00010203
[  248.274982] RAX: ffffa0f77d1c0010 RBX: ffffa0f793ae9168 RCX: 0000000000000001
[  248.275064] RDX: ffffa0f79753db00 RSI: 0000000000000001 RDI: 0000000000000000
[  248.275145] RBP: ffffb5ad809b3e00 R08: ffffb5ad809b3da0 R09: 0000000000000000
[  248.275225] R10: ffffb5ad809b3e68 R11: 0000000000000000 R12: ffffa0f793ae9190
[  248.275306] R13: ffffb5ad809b3ef0 R14: 0000000000000001 R15: ffffa0f793ae9168
[  248.275388] FS:  00007f5f1ec4d540(0000) GS:ffffa0f79ec80000(0000) knlGS:0000000000000000
[  248.275480] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  248.275547] CR2: 0000000000000130 CR3: 000000042a03c005 CR4: 00000000003706e0
[  248.275628] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  248.275708] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  248.275789] Call Trace:
[  248.276124]  ? current_backlight_read+0x24/0x40 [amdgpu]
[  248.276194]  seq_read+0xc3/0x3f0
[  248.276240]  full_proxy_read+0x5c/0x90
[  248.276290]  vfs_read+0xa7/0x190
[  248.276334]  ksys_read+0xa7/0xe0
[  248.276379]  __x64_sys_read+0x1a/0x20
[  248.276429]  do_syscall_64+0x37/0x80
[  248.276477]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  248.276538] RIP: 0033:0x7f5f1e75c191
[  248.276585] Code: fe ff ff 48 8d 3d b7 9d 0a 00 48 83 ec 08 e8 46 4d 02 00 66 0f 1f 44 00 00 48 8d 05 71 07
2e 00 8b 00 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 41 54 55 49 89 d4 53Hw
[  248.276784] RSP: 002b:00007ffcb1fc3f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[  248.276872] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5f1e75c191
[  248.276953] RDX: 0000000000020000 RSI: 00007f5f1ec2b000 RDI: 0000000000000003
[  248.277034] RBP: 0000000000020000 R08: 00000000ffffffff R09: 0000000000000000
[  248.277115] R10: 0000000000000022 R11: 0000000000000246 R12: 00007f5f1ec2b000
[  248.277195] R13: 0000000000000003 R14: 00007f5f1ec2b00f R15: 0000000000020000
[  248.277279] Modules linked in: amdgpu(OE) iommu_v2 gpu_sched ttm(OE) drm_kms_helper cec drm
i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs
lockd grace fscache nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic
ledtrig_audio intel_rapl_msr intel_rapl_common snd_hda_intel snd_intel_dspcfg x86_pkg_temp_thermal
intel_powerclamp snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event mei_hdcp
coretemp snd_rawmidi snd_seq kvm_intel kvm snd_seq_device snd_timer irqbypass joydev snd input_leds soundcore
crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper rapl intel_cstate
mac_hid mei_me serio_raw mei eeepc_wmi wmi_bmof asus_wmi mxm_wmi intel_wmi_thunderbolt acpi_pad sparse_keymap
efi_pstore sch_fq_codel parport_pc ppdev lp parport sunrpc ip_tables x_tables autofs4 hid_logitech_hidpp
hid_logitech_dj hid_generic usbhid hid e1000e psmouse ahci libahci wmi video
[  248.278211] CR2: 0000000000000130
[  248.278221] ---[ end trace 1fbe72fe6f91091d ]---
[  248.357226] RIP: 0010:dc_link_get_backlight_level+0x5/0x70 [amdgpu]
[  248.357272] Code: 67 ff ff ff 41 b9 03 00 00 00 e9 45 ff ff ff d1 ea e9 55 ff ff ff 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <48> 8b 87 30 01 00 00 48 8b 00 48 8b 88 88 03 00 00 48 8d 81 e8 01

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add support to umd P-state function for vangogh

This patch is to add support to umd P-state function for vangogh.
It enables the "set" function of 3 sysfs nodes: pp_dpm_mclk,
pp_dpm_fclk, pp_dpm_socclk, the functions is used to set the DPM
frequency level of memclk/fclk/socclk.
Due to only after enabling the "power_dpm_force_performance_level"
sysfs node, it is allowed to set these three nodes,
so this patch also enables the "powe_dpm_force_performance_level"
sysfs node, which is used to change power profile.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add some basic functions to support umd P-state function for vangogh.

This patch is to add some basic functions to support
umd P-state function for vangogh.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add some basic functions to support umd P-state function for vangogh.

This patch is to add some basic functions to support umd
P-state function for vangogh.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: enable the fine grain tuning function for renoir

This patch is to enable the fine grain tuning function for renoir.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add the fine grain tuning function for renoir

This patch is to add the fine grain tuning function for renoir.
This function uses the pp_od_clk_voltage sysfs file to configure the min
and max value of gfx clock frequency manually or restore the default value.

Command guide:
echo "s level value" > pp_od_clk_voltage
        "s" - set the sclk frequency
        "level" - 0 or 1, "0" represents the min value,  "1" represents
        the max value
        "value" - the target value of sclk frequency, it should
        be limited in the safe range
echo "r" > pp_od_clk_voltage
        "r" - reset the sclk frequency, restore the default value instantly
echo "c" > pp_od_clk_voltage
        "c" - commit the min and max value of sclk frequency to the system
        only after the commit command, the target values set by "s" command
        will take effect.
Example:
1)change power profile from "auto" to "standard"
        $ cat power_dpm_force_performance_level
        auto
        $ echo "profile_standard" > power_dpm_force_performance_level
        $ cat power_dpm_force_performance_level
        profile_standard
2)check the default sclk frequency
        $ cat pp_od_clk_voltage
        OD_SCLK:
        0:        200Mhz
        1:       1400Mhz
        OD_RANGE:
        SCLK:     200MHz       1400MHz
3)use "s" -- set command to configure the min and max sclk frequency
        $ echo "s 0 600" > pp_od_clk_voltage
        $ echo "s 1 1000" > pp_od_clk_voltage
        $ echo "c" > pp_od_clk_voltage
        $ cat pp_od_clk_voltage
        OD_SCLK:
        0:        600Mhz
        1:       1000Mhz
        OD_RANGE:
        SCLK:     200MHz       1400MHz
4)use "r" -- reset command to restore the min or max sclk frequency
        $ echo "r" > pp_od_clk_voltage
        $ cat pp_od_clk_voltage
        OD_SCLK:
        0:        200Mhz
        1:       1400Mhz
        OD_RANGE:
        SCLK:     200MHz       1400MHz

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: updated PM to I2C controller port on sienna cichlid

sienna cichlid interfaces with RAS eeprom on I2C controller port 1

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: improve the fine grain tuning function for RV/RV2/PCO

This patch is to improve the fine grain tuning function for RV/RV2/PCO.
This patch adds two new commands: "restore" and "commit".
This function uses the pp_od_clk_voltage sysfs file to configure the min
and max value of gfx clock frequency manually or restore the default value.

Command guide:
echo "s level value" > pp_od_clk_voltage
        "s" - set the sclk frequency
        "level" - 0 or 1, "0" represents the min value,  "1" represents
        the max value
        "value" - the target value of sclk frequency, it should be limited in the
        safe range
echo "r" > pp_od_clk_voltage
        "r" - reset the sclk frequency, restore the default value instantly
echo "c" > pp_od_clk_voltage
        "c" - commit the min and max value of sclk frequency to the system
        only after the commit command, the target values set by "s" command
        will take effect.
Example:
1)change power profile from "auto" to "manual"
        $ cat power_dpm_force_performance_level
        auto
        $ echo "manual" > power_dpm_force_performance_level
        $ cat power_dpm_force_performance_level
        manual
2)check the default sclk frequency
        $ cat pp_od_clk_voltage
        OD_SCLK:
        0:        200Mhz
        1:       1400Mhz
        OD_RANGE:
        SCLK:     200MHz       1400MHz
3)use "s" -- set command to configure the min and max sclk frequency
        $ echo "s 0 600" > pp_od_clk_voltage
        $ echo "s 1 1000" > pp_od_clk_voltage
        $ echo "c" > pp_od_clk_voltage
        $ cat pp_od_clk_voltage
        OD_SCLK:
        0:        600Mhz
        1:       1000Mhz
        OD_RANGE:
        SCLK:     200MHz       1400MHz
4)use "r" -- reset command to restore the min or max sclk frequency
        $ echo "r" > pp_od_clk_voltage
        $ cat pp_od_clk_voltage
        OD_SCLK:
        0:        200Mhz
        1:       1400Mhz
        OD_RANGE:
        SCLK:     200MHz       1400MHz

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: enable the "fetch" function of pp_dpm_vclk/dclk for vangogh

This patch is to enable the "fetch" function of pp_dpm_vclk and
pp_dpm_dclk.
It allows to fetch the current frequency of vcn and dcn and their
DPM levels for vangogh.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add two new sysfs nodes for vangogh

This patch is to add two new sysfs nodes for vangogh:
pp_dpm_dclk and pp_dpm_vclk.
The two sysfs nodes are similar to pp_dpm_fclk/memclk/socclk.
pp_dpm_dclk represents the DPM frequency of dcn unit.
pp_dpm_vclk represents the DPM frequency of vcn unit.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add new feature map macros to resolve duplicate name

This patch is to add new feature map macros to resolve duplicate name.
Vangogh uses one different format to name some feature bits of swSMU, it
causes some duplicate name in the existing feature map list.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add support to umd P-state "fetch" function for vangogh

This patch is to add supoort to umd P-state function for vangogh.
It enables the "fetch" function of 3 sysfs nodes: pp_dpm_mclk,
pp_dpm_fclk, pp_dpm_socclk,the function is used to fetch
the current frequency of memclk/fclk/socclk.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: correct the sensor value of power for vangogh

This patch is to correct the sensor value of power for vangogh.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/i915/display/psr: Program plane's calculated offset to plane SF register

It programs Plane's calculated x, y, offset to Plane SF register.
It does the calculation of x and y offsets using
skl_calc_main_surface_offset().

v3: Update commit message

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Tested-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210104205654.238928-4-jose.souza@intel.com

drm/i915/display: Split and export main surface calculation from skl_check_main_surface()

The calculation the offsets of the main surface will be needed by PSR2
selective fetch code so here splitting and exporting it.
No functional changes were done here.

v3: Rebased

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Tested-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210104205654.238928-3-jose.souza@intel.com

drm/i915/display/psr: Use plane damage clips to calculate damaged area

Now using plane damage clips property to calcualte the damaged area.
Selective fetch only supports one region to be fetched so software
needs to calculate a bounding box around all damage clips.

Now that we are not complete fetching each plane, there is another
loop needed as all the plane areas that intersect with the pipe
damaged area needs to be fetched from memory so the complete blending
of all planes can happen.

v2:
- do not shifting new_plane_state->uapi.dst only src is in 16.16 format

v4:
- setting plane selective fetch area using the whole pipe damage area
- mark the whole plane area damaged if plane visibility or alpha
changed

v5:
- taking in consideration src.y1 in the damage coordinates
- adding to the pipe damaged area planes that were visible but are
invisible in the new state

v6:
- consider old state plane coordinates when visibility changes or it
moved to calculate damaged area
- remove from damaged area the portion not in src clip

v7:
- intersec every damage clip with src to minimize damaged area

v8:
- adjust pipe_damaged area to 4 lines grouping
- adjust calculation now that is understood that uapi.src is the
framebuffer coordinates that plane will start to fetch from

v9:
- Only add plane dst or src to damaged_area if visible
- Early skip plane damage calculation if it was not visible in old and
new state

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210104205654.238928-2-jose.souza@intel.com

drm: Add function to convert rect in 16.16 fixed format to regular format

Much more clear to read one function call than four lines doing this
conversion.

v7:
- function renamed
- calculating width and height before truncate
- inlined

v10:
- renamed parameters from source and destination to src and dst
to match sister functions

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210104205654.238928-1-jose.souza@intel.com

drm/doc: render drm.h uapi docs

It doesn't seem like drm.h docs are included anywhere. Render them next
to drm_mode.h, under the "Userspace API Structures" section.

This also allows references to e.g. DRM_CAP_* to be properly linkified
elsewhere in our docs.

Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201222133524.160842-6-contact@emersion.fr

drm/doc: demote old doc-comments in drm.h

Sphinx doesn't like old doc-comments in drm.h and generates warnings
like:

    ./include/uapi/drm/drm.h:87: warning: cannot understand function prototype: 'struct drm_clip_rect '
    ./include/uapi/drm/drm.h:97: warning: cannot understand function prototype: 'struct drm_drawable_info '
    ./include/uapi/drm/drm.h:105: warning: cannot understand function prototype: 'struct drm_tex_region '
    ...

Demote these to regular comments, because converting all of them is
quite a lot of work (also requires documenting all of the struct fields
for instance). Also many of these structures aren't really used by
modern user-space.

We can easily convert these remaining old comments to Sphinx style on a
one-by-one basis.

Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201222133524.160842-5-contact@emersion.fr

drm/doc: re-format drm.h file comment

Our documentation build system chokes on \file comments:

    ./include/uapi/drm/drm.h:2: warning: Cannot understand  * \file drm.h
     on line 2 - I thought it was a doc line

Remove all of the slash-directives, and demote to a normal comment. Keep
the historical information because it predates Git.

v3: keep the comment (Daniel)

Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201222133524.160842-4-contact@emersion.fr

drm: bridge: adv7511: Remove redundant null check before clk_disable_unprepare

Because clk_disable_unprepare() already checked NULL clock parameter,
so the additional check is unnecessary, just remove them.

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: bridge: dw-hdmi: Remove redundant null check before clk_disable_unprepare

Because clk_disable_unprepare() already checked NULL clock parameter,
so the additional check is unnecessary, just remove them.

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

dt-bindings: display: bridge: renesas,lvds: RZ/G2E needs renesas,companion too

Document RZ/G2E support for property renesas,companion.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: Constify drm_driver in drivers that don't modify it

A non-const structure containing function pointers is a possible attack
vector. The drm_driver structure is already const in most drivers, but
there are a few exceptions. Constify the structure in the drivers that
don't need to modify at, as a low-hanging fruit. The rest of the drivers
will need a more complex fix.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Use a const drm_driver for legacy PCI devices

Now that the legacy PCI support code doesn't need to write to the
drm_driver structure, it can be treated as const through the whole DRM
core, unconditionally. This allows declaring the structure as const in
all drivers, removing one possible attack vector.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Move legacy device list out of drm_driver

The drm_driver structure contains a single field (legacy_dev_list) that
is modified by the DRM core, used to store a linked list of legacy DRM
devices associated with the driver. In order to make the structure
const, move the field out to a global variable. This requires locking
access to the global where the local field didn't require serialization,
but this only affects legacy drivers, and isn't in any hot path.

While at it, compile-out the legacy_dev_list field when DRM_LEGACY isn't
defined.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

drm: Don't export the drm_gem_dumb_destroy() function

The drm_gem_dumb_destroy() isn't used in drivers, don't export it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: zte: Remove unnecessary drm_plane_cleanup() wrapper

Use the drm_plane_cleanup() function directly as the drm_plane_funcs
.destroy() handler without creating an unnecessary wrapper around it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: vc4: Remove unnecessary drm_plane_cleanup() wrapper

Use the drm_plane_cleanup() function directly as the drm_plane_funcs
.destroy() handler without creating an unnecessary wrapper around it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: sti: Remove unnecessary drm_plane_cleanup() wrapper

Use the drm_plane_cleanup() function directly as the drm_plane_funcs
.destroy() handler without creating an unnecessary wrapper around it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: arc: Remove unnecessary drm_plane_cleanup() wrapper

Use the drm_plane_cleanup() function directly as the drm_plane_funcs
.destroy() handler without creating an unnecessary wrapper around it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: rcar-du: Fix leak of CMM platform device reference

The device references acquired by of_find_device_by_node() are not
released by the driver. Fix this by registering a cleanup action.

Fixes: 8de707aeb452 ("drm: rcar-du: kms: Initialize CMM instances")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

drm: rcar-du: Fix the return check of of_parse_phandle and of_find_device_by_node

of_parse_phandle and of_find_device_by_node may return NULL
which cannot be checked by IS_ERR.

Fixes: 8de707aeb452 ("drm: rcar-du: kms: Initialize CMM instances")
Signed-off-by: Wang Xiaojun <wangxiaojun11@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
[Replace -ENODEV with -EINVAL]

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: Drop local encoder variable

The local encoder variable is an alias for &renc->base, and is only use
twice. It doesn't help much, drop it, along with the
rcar_encoder_to_drm_encoder() macro that is then unused.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

drm: rcar-du: Skip encoder allocation for LVDS1 in dual-link mode

The rcar-du driver skips registration of the encoder for the LVDS1
output when LVDS is used in dual-link mode, as the LVDS0 and LVDS1 links
are bundled and handled through the LVDS0 output. It however still
allocates the encoder and immediately destroys it, which is pointless.
Skip allocation of the encoder altogether in that case.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

drm: rcar-du: Replace dev_private with container_of

Now that drm_device is embedded in rcar_du_device, we can use
container_of to get the rcar_du_device pointer from the drm_device,
instead of using the drm_device.dev_private field.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>