target/s390x: Mark FPSEH facility as available

This facility bit includes DFP-rounding, FPR-GR-transfer,
FPS-sign-handling, and IEEE-exception-simulation.  We do
support all of these.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/s390x: implement mvcos instruction

This adds support for the MOVE WITH OPTIONAL SPECIFICATIONS (MVCOS)
instruction. Allow to enable it for the qemu cpu model using

qemu-system-s390x ... -cpu qemu,mvcos=on ...

This allows to boot linux kernel that uses it for uacccess.

We are missing (as for most other part) low address protection checks,
PSW key / storage key checks and support for AR-mode.

We fake an ADDRESSING exception when called from problem state (which
seems to rely on PSW key checks to be in place) and if AR-mode is used.
user mode will always see a PRIVILEDGED exception.

This patch is based on an original patch by Miroslav Benes (thanks!).

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170614133819.18480-3-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/s390x: change PSW_SHIFT_KEY

Such shifts are usually used to easily extract the PSW KEY from the PSW
mask, so let's avoid the confusing offset of 4.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170614133819.18480-2-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/s390x: Map existing FAC_* names to S390_FEAT_* names

The FAC_ names were placeholders prior to the introduction
of the current facility modeling.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20170621-pull-request' into staging

# gpg: Signature made Wed 21 Jun 2017 16:43:14 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20170621-pull-request:
  usb-host: support devices with sparse/non-sequential USB interfaces

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/stsquad/tags/pull-ci-updates-210617-2' into staging

This is mostly Philippe's updates

We add the following cross-compile targets:
  - mipsel-softmmu,mipsel-linux-user,mips64el-linux-user
  - armeb-linux-user

While I was rolling I discovered we could also back out a bunch of the
emdebian hacks as the newly released stretch handles cross compilers
as first class citizens. Unfortunately this also meant I had to drop
the powerpc support as that is no longer in Debian stable.

# gpg: Signature made Wed 21 Jun 2017 15:09:50 BST
# gpg:                using RSA key 0xFBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-ci-updates-210617-2: (21 commits)
  MAINTAINERS: self-appoint me as reviewer in build/test automation
  MAINTAINERS: add Shippable automation platform URL
  shippable: add mipsel target
  shippable: add armeb-linux-user target
  shippable: be verbose while building docker images
  shippable: do not initialize submodules automatically
  shippable: build using all available cpus
  shippable: use C locale to simplify console output
  docker: add mipsel build target
  docker: add extra libs to s390x target to extend codebase coverage
  docker: add extra libs to arm64 target to extend codebase coverage
  docker: add extra libs to armhf target to extend codebase coverage
  docker: use eatmydata in debian arm64 image
  docker: use eatmydata in debian armhf image
  docker: use eatmydata, install common build packages in base image
  docker: use better regex to generate deb-src entries
  docker: install ca-certificates package in base image
  docker: rebuild image if 'extra files' checksum does not match
  docker: add --include-files argument to 'build' command
  docker: let _copy_with_mkdir() sub_path argument be optional
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/kraxel/tags/queue/ui-pull-request' into staging

# gpg: Signature made Wed 21 Jun 2017 14:23:31 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/queue/ui-pull-request:
  ui: Remove inclusion of "hw/qdev.h"
  console: remove do_safe_dpy_refresh
  gtk: use framebuffer helper functions.
  sdl2: use framebuffer helper functions.
  egl-headless: use framebuffer helper functions.
  egl-helpers: add helpers to handle opengl framebuffers

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-06-09-v2' into staging

QAPI patches for 2017-06-09

# gpg: Signature made Tue 20 Jun 2017 13:31:39 BST
# gpg:                using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2017-06-09-v2: (41 commits)
  tests/qdict: check more get_try_int() cases
  console: use get_uint() for "head" property
  i386/cpu: use get_uint() for "min-level"/"min-xlevel" properties
  numa: use get_uint() for "size" property
  pnv-core: use get_uint() for "core-pir" property
  pvpanic: use get_uint() for "ioport" property
  auxbus: use get_uint() for "addr" property
  arm: use get_uint() for "mp-affinity" property
  xen: use get_uint() for "max-ram-below-4g" property
  pc: use get_uint() for "hpet-intcap" property
  pc: use get_uint() for "apic-id" property
  pc: use get_uint() for "iobase" property
  acpi: use get_uint() for "pci-hole*" properties
  acpi: use get_uint() for various acpi properties
  acpi: use get_uint() for "acpi-pcihp-io*" properties
  platform-bus: use get_uint() for "addr" property
  bcm2835_fb: use {get, set}_uint() for "vcram-size" and "vcram-base"
  aspeed: use {set, get}_uint() for "ram-size" property
  pcihp: use get_uint() for "bsel" property
  pc-dimm: make "size" property uint64
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20170619' into staging

Queued TCG patches

# gpg: Signature made Mon 19 Jun 2017 19:12:06 BST
# gpg:                using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC  16A4 AD12 70CC 4DD0 279B

* remotes/rth/tags/pull-tcg-20170619:
  target/arm: Exit after clearing aarch64 interrupt mask
  target/s390x: Exit after changing PSW mask
  target/alpha: Use tcg_gen_lookup_and_goto_ptr
  tcg: Increase hit rate of lookup_tb_ptr
  tcg/arm: Use ldr (literal) for goto_tb
  tcg/arm: Try pc-relative addresses for movi
  tcg/arm: Remove limit on code buffer size
  tcg/arm: Use indirect branch for goto_tb
  tcg/aarch64: Use ADR in tcg_out_movi
  translate-all: consolidate tb init in tb_gen_code
  tcg: allocate TB structs before the corresponding translated code
  util: add cacheinfo

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

MAINTAINERS: self-appoint me as reviewer in build/test automation

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

MAINTAINERS: add Shippable automation platform URL

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

shippable: add mipsel target

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[AJB: fixups after dropping powerpc]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

shippable: add armeb-linux-user target

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

shippable: be verbose while building docker images

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

shippable: do not initialize submodules automatically

instead do it in the 'ci' target when needed.

for mips64el-softmmu target:
use dtc submodule if distrib packages are too old.

example with outdated libfdt on mips64el-softmmu target (required is >= 1.4.2):
 # dpkg-query --showformat='${Version}\n' --show libfdt-dev
 1.4.0+dfsg-1

shippable output:
----------------
  LINK    mips64el-softmmu/qemu-system-mips64el
../hw/core/loader-fit.o: In function `load_fit':
/root/src/github.com/philmd/qemu/hw/core/loader-fit.c:278: undefined reference to `fdt_first_subnode'
/root/src/github.com/philmd/qemu/hw/core/loader-fit.c:286: undefined reference to `fdt_next_subnode'
/root/src/github.com/philmd/qemu/hw/core/loader-fit.c:277: undefined reference to `fdt_first_subnode'
collect2: error: ld returned 1 exit status
Makefile:201: recipe for target 'qemu-system-mips64el' failed
make[1]: *** [qemu-system-mips64el] Error 1
Makefile:327: recipe for target 'subdir-mips64el-softmmu' failed
make: *** [subdir-mips64el-softmmu] Error 2

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

shippable: build using all available cpus

As of this commit:

$ echo "container proc:" `getconf _NPROCESSORS_ONLN` `getconf _NPROCESSORS_CONF`
container proc: 2 2

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

shippable: use C locale to simplify console output

remove this noise:

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = "en_US.UTF-8",
    LC_CTYPE = "en_US.UTF-8",
    LANG = "en_US.UTF-8"
    are supported and installed on your system.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

docker: add mipsel build target

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[AJB: remove apt-fake kludge]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

docker: add extra libs to s390x target to extend codebase coverage

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

docker: add extra libs to arm64 target to extend codebase coverage

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

docker: add extra libs to armhf target to extend codebase coverage

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

docker: use eatmydata in debian arm64 image

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

docker: use eatmydata in debian armhf image

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

docker: use eatmydata, install common build packages in base image

The common build packages are: build-essential clang git bison flex

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[AJB: fixups following stretch update]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

docker: use better regex to generate deb-src entries

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[AJB: fixed up following dropping emdebian]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

docker: install ca-certificates package in base image

Resolve SSL verification issue at shippable container's git_sync stage:

shippable logs:
--------------
git_sync
- ssh-agent bash -c 'ssh-add /tmp/ssh/01_deploy; git clone https://github.com/philmd/qemu.git /root/src/github.com/philmd/qemu'
Identity added: /tmp/ssh/01_deploy (rsa w/o comment)
Cloning into '/root/src/github.com/philmd/qemu'...
fatal: unable to access 'https://github.com/philmd/qemu.git/': Problem with the SSL CA cert (path? access rights?)
retrying 1 of 3 times...

Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[AJB: fixed re-base conflict following stretch updates]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

docker: rebuild image if 'extra files' checksum does not match

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

docker: add --include-files argument to 'build' command

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

docker: let _copy_with_mkdir() sub_path argument be optional

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

docker: update qemu:debian base following stretch release

Debian has now released Stretch as its new stable. As we track
debian:stable-slim this has a few consequences. For one thing we can
now drop the emdebian hacks as cross compilers are part of the
official repositories now. However we do loose the ability to build
against powerpc (not ppc64) since that is no longer a release
architecture.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

usb-host: support devices with sparse/non-sequential USB interfaces

Some USB devices have sparse interface numbering which is not able to be
passthroughed.
For example, the Sierra Wireless MC7455/MC7430:

  # lsusb  -D /dev/bus/usb/003/003 | egrep '1199|9071|bNumInterfaces|bInterfaceNumber'
  Device: ID 1199:9071 Sierra Wireless, Inc.
    idVendor           0x1199 Sierra Wireless, Inc.
    idProduct          0x9071
      bNumInterfaces          5
        bInterfaceNumber        0
        bInterfaceNumber        2
        bInterfaceNumber        3
        bInterfaceNumber        8
        bInterfaceNumber       10

In this case, the interface numbers are 0, 2, 3, 8, 10 and not the
0, 1, 2, 3, 4 that QEMU tries to claim.

This change allows sparse USB interface numbering.
Instead of only claiming the interfaces in the range reported by the USB
device through bNumInterfaces, QEMU attempts to claim all possible
interfaces.

v2 to fix broken v1 patch formatting.
v3 to fix indentation.

Signed-off-by: Samuel Brian <sam.brian@accelerated.com>
Message-id: 20170613234039.27201-1-sam.brian@accelerated.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

ui: Remove inclusion of "hw/qdev.h"

Looks like #include "hw/qdev.h" is not needed here, so remove it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1497894617-12143-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

console: remove do_safe_dpy_refresh

Drop the temporary workaround for the broken display updates.
All display adapters are updated, so this should be safe without
causing regressions.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20170614084538.32480-1-kraxel@redhat.com

gtk: use framebuffer helper functions.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170614084149.31314-5-kraxel@redhat.com

sdl2: use framebuffer helper functions.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170614084149.31314-4-kraxel@redhat.com

egl-headless: use framebuffer helper functions.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170614084149.31314-3-kraxel@redhat.com

egl-helpers: add helpers to handle opengl framebuffers

Add a collection of egl_fb_*() helper functions to manage and use opengl
framebuffers, which is a common pattern in UI code with opengl support.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170614084149.31314-2-kraxel@redhat.com

tcg/tci: fix tcg-interpreter build

fix regression from commit 244f144134:

    $ make subdir-arm-softmmu
    make[1]: *** No rule to make target 'tci.o', needed by 'qemu-system-arm'.  Stop.
    Makefile:328: recipe for target 'subdir-arm-softmmu' failed
    make: *** [subdir-arm-softmmu] Error 2

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170620163009.21764-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc: fixes, cleanups, features

Some fixes and cleanups. Extended TSEG sizes.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 16 Jun 2017 16:45:07 BST
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  hw/i386: fix nvdimm check error path
  intel_iommu: cleanup vtd_interrupt_remap_msi()
  intel_iommu: cleanup vtd_{do_}iommu_translate()
  intel_iommu: switching the rest DPRINTF to trace
  tests/q35-test: add TSEG size checks
  tests/q35-test: push down qtest_start / qtest_end to test case(s)
  q35/mch: implement extended TSEG sizes

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/famz/tags/docker-and-block-pull-request' into staging

# gpg: Signature made Fri 16 Jun 2017 01:18:46 BST
# gpg:                using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021  AD56 CA35 624C 6A91 71C6

* remotes/famz/tags/docker-and-block-pull-request: (23 commits)
  block: make accounting thread-safe
  block: split BlockAcctStats creation and setup
  block: introduce block_account_one_io
  block: protect modification of dirty bitmaps with a mutex
  migration/block: reset dirty bitmap before reading
  block: introduce dirty_bitmap_mutex
  block: protect tracked_requests and flush_queue with reqs_lock
  block: access write_gen with atomics
  block: use Stat64 for wr_highest_offset
  util: add stats64 module
  throttle-groups: protect throttled requests with a CoMutex
  throttle-groups: do not use qemu_co_enter_next
  throttle-groups: only start one coroutine from drained_begin
  block: access io_plugged with atomic ops
  block: access wakeup with atomic ops
  block: access serialising_in_flight with atomic ops
  block: access io_limits_disabled with atomic ops
  block: access quiesce_counter with atomic ops
  block: access copy_on_read with atomic ops
  docker: Add flex and bison to centos6 image
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* nbd and qemu-nbd fixes (Eric, Max)
* nbd refactoring (Vladimir)
* vhost-user-scsi, take N+1 (Felipe)
* replace memory_region_set_fd with memory_region_init_ram_from_fd (Marc-André)
* docs/ movement (Paolo)
* megasas TOCTOU fixes (Paolo)
* make async_safe_run_on_cpu work on kvm/hax accelerators (Paolo)
* Build system and poison.h improvements (Thomas)
* -accel thread=xxx fix (Thomas)
* move files to accel/ (Yang Zhong)

# gpg: Signature made Thu 15 Jun 2017 10:51:55 BST
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (41 commits)
  vhost-user-scsi: Introduce a vhost-user-scsi sample application
  vhost-user-scsi: Introduce vhost-user-scsi host device
  qemu-doc: include version number
  docs: create interop/ subdirectory
  include/exec/poison: Mark some CONFIG defines as poisoned, too
  include/exec/poison: Add missing TARGET defines
  nbd/server: refactor nbd_trip
  nbd/server: rename rc to ret
  nbd/server: get rid of fail: return rc
  nbd/server: nbd_negotiate: fix error path
  nbd/server: remove NBDClientNewData
  nbd/server: refactor nbd_co_receive_request
  nbd/server: get rid of EAGAIN dead code
  nbd/server: refactor nbd_co_send_reply
  nbd/server: get rid of ssize_t
  nbd/server: get rid of nbd_negotiate_read and friends
  nbd: make nbd_drop public
  nbd: rename read_sync and friends
  accel: move kvm related accelerator files into accel/
  tcg: move tcg backend files into accel/tcg/
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/qdict: check more get_try_int() cases

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-42-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

console: use get_uint() for "head" property

TYPE_QEMU_CONSOLE property "head" is defined with
object_property_add_uint*_ptr().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-41-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

i386/cpu: use get_uint() for "min-level"/"min-xlevel" properties

These are properties of TYPE_X86_CPU, defined with DEFINE_PROP_UINT32()

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-40-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

numa: use get_uint() for "size" property

"size" is a property of TYPE_MEMORY_BACKEND.
host_memory_backend_get_size() and host_memory_backend_set_size() use
visit_type_size().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-39-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

pnv-core: use get_uint() for "core-pir" property

This is an alias of TYPE_PNV_CORE's property "pir", which is defined
with DEFINE_PROP_UINT32()

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-38-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

pvpanic: use get_uint() for "ioport" property

TYPE_ISA_PVPANIC_DEVICE's property PVPANIC_IOPORT_PROP is defined with
DEFINE_PROP_UINT16().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-37-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

auxbus: use get_uint() for "addr" property

This is TYPE_MEMORY_REGION's property.  Its getter
memory_region_get_addr() uses visit_type_uint64().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-36-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

arm: use get_uint() for "mp-affinity" property

TYPE_ARM_CPU's property "mp-affinity" is defined with
DEFINE_PROP_UINT64().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-35-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

xen: use get_uint() for "max-ram-below-4g" property

TYPE_PC_MACHINE's property PC_MACHINE_MAX_RAM_BELOW_4G's getter and
setter pc_machine_get_max_ram_below_4g() and
pc_machine_set_max_ram_below_4g() use visit_type_size()

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-34-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

pc: use get_uint() for "hpet-intcap" property

TYPE_HPET's property HPET_INTCAP is defined with DEFINE_PROP_UINT32().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-33-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

pc: use get_uint() for "apic-id" property

TYPE_X86_CPU's property "apic-id" is defined with DEFINE_PROP_UINT32().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-32-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

pc: use get_uint() for "iobase" property

TYPE_ISA_FDC's property "iobase" is defined with DEFINE_PROP_UINT32().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-31-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

acpi: use get_uint() for "pci-hole*" properties

Those properties use visit_type_uint*()

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-30-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

acpi: use get_uint() for various acpi properties

PIIX4: piix4_pm_add_propeties() defines these with
object_property_add_uint*_ptr().

Q35: ich9_lpc_add_properties() and ich9_pm_add_properties() define them
similarly, except for ACPI_PM_PROP_GPE0_BLK().  That one's getter
ich9_pm_get_gpe0_blk() uses visit_type_uint32().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-29-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

acpi: use get_uint() for "acpi-pcihp-io*" properties

Those are defined with object_property_add_uint16_ptr()

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-28-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

platform-bus: use get_uint() for "addr" property

This is TYPE_MEMORY_REGION's property.  Its getter
memory_region_get_addr() uses visit_type_uint64().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-27-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

bcm2835_fb: use {get, set}_uint() for "vcram-size" and "vcram-base"

Both properties are defined with DEFINE_PROP_UINT32().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-26-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

aspeed: use {set, get}_uint() for "ram-size" property

This property is an alias for device TYPE_ASPEED_SDMC's property
"ram-size", which is defined with DEFINE_PROP_UINT64().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-25-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

pcihp: use get_uint() for "bsel" property

The property is defined with object_property_add_uint32_ptr()

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-24-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

pc-dimm: make "size" property uint64

This carries the memory_region_size() value without implicit cast.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-23-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

pc-dimm: use get_uint() for dimm properties

TYPE_PC_DIMM's property PC_DIMM_ADDR_PROP is defined with
DEFINE_PROP_UINT64().

TYPE_PC_DIMM's property PC_DIMM_NODE_PROP is defined with
DEFINE_PROP_UINT32().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-22-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

isa: use get_uint() for "io-base"

The property is defined with DEFINE_PROP_UINT32().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-21-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qdev: Use appropriate getter/setters type

Based on the underlying type of the data accessed, use the appropriate
getters/setters:

* AcpiPmInfo members s3_disabled, s4_disabled are bool, member s4_val is
  an uint8_t

* Property ACPI_PCIHP_IO_PROP is defined with
  object_property_add_uint32_ptr()

* Property PCIE_HOST_MCFG_SIZE is implemented with visit_type_uint64()

* PCIDevice property "addr" is backed by PCIDevice member devfn, which
  is an int32_t

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-20-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[More verbose commit message]
Signed-off-by: Markus Armbruster <armbru@redhat.com>

apic-common: make "id" property a uint32

The getter and setter of TYPE_APIC_COMMON property "id" are
apic_common_get_id() and apic_common_set_id().

apic_common_get_id() reads either APICCommonState member uint32_t
initial_apic_id or uint8_t id into an int64_t local variable.  It then
passes this variable to visit_type_int().

apic_common_set_id() uses visit_type_int() to read the value into a
local variable, which it then assigns both to initial_apic_id and id.

While the state backing the property is two unsigned members, 8 and 32
bits wide, the actual visitor is 64 bits signed.

Change getter and setter to use visit_type_uint32().  Then everything's
uint32_t, except for @id.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-19-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qdev: avoid type casts between signed and unsigned

Modify the unsigned type for various properties to use QNUM_U64, to
avoid type casts.

There are a few empty lines added to improve code reading/style.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-18-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Change to set_default_value_enum() dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qdev: wrap default property value in an union

Wrap the Property default value (an int64_t) in a union, to prepare
for the next patch adding a uint64_t.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-17-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qdev: Rename DEFINE_PROP_DEFAULT() to DEFINE_PROP_SIGNED()

The rename prepares for the patch after next's DEFINE_PROP_UNSIGNED().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-16-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>

object: use more specific property type names

Use the actual unsigned integer type name.

The type name change impacts the following externally visible area:

* vl.c's machine_help_func() puts it in help for -machine NAME,help.

* QMP command qom-list exposes it in ObjectPropertyInfo member @type.

* QMP command device-list-properties exposes it in DevicePropertyInfo
  member @type.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-15-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

q35: fix get_mmcfg_size to use uint64 visitor

e->size is hwaddr, i.e. uint64_t. We silently truncate.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-14-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

object: add uint property setter/getter

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-13-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi: update the qobject visitor to use QNUM_U64

Switch to use QNum/uint where appropriate to remove i64 limitation.

The input visitor will cast i64 input to u64 for compatibility
reasons (existing json QMP client already use negative i64 for large
u64, and expect an implicit cast in qemu).

Note: before the patch, uint64_t values above INT64_MAX are sent over
json QMP as negative values, e.g. UINT64_MAX is sent as -1. After the
patch, they are sent unmodified.  Clearly a bug fix, but we have to
consider compatibility issues anyway.  libvirt should cope fine,
because its parsing of unsigned integers accepts negative values
modulo 2^64.  There's hope that other clients will, too.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-12-marcandre.lureau@redhat.com>
[check_native_list() tweaked for consistency with signed case]
Signed-off-by: Markus Armbruster <armbru@redhat.com>

json: learn to parse uint64 numbers

Switch strtoll() usage to qemu_strtoi64() helper while at it.

Add a few tests for large numbers.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-11-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qnum: add uint type

In order to store integer values between INT64_MAX and UINT64_MAX, add
a uint64_t internal representation.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-10-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

tests: remove /{qnum, qlist, dict}/destroy test

The tests aren't really useful, or already covered by other simple tests.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-9-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi: Remove visit_start_alternate() parameter promote_int

Before the previous commit, parameter promote_int = true made
visit_start_alternate() with an input visitor avoid QTYPE_QINT
variants and create QTYPE_QFLOAT variants instead.  This was used
where QTYPE_QINT variants were invalid.

The previous commit fused QTYPE_QINT with QTYPE_QFLOAT, rendering
promote_int useless and unused.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-8-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi: merge QInt and QFloat in QNum

We would like to use a same QObject type to represent numbers, whether
they are int, uint, or floats. Getters will allow some compatibility
between the various types if the number fits other representations.

Add a few more tests while at it.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[parse_stats_intervals() simplified a bit, comment in
test_visitor_in_int_overflow() tidied up, suppress bogus warnings]
Signed-off-by: Markus Armbruster <armbru@redhat.com>

Merge remote-tracking branch 'remotes/vivier/tags/m68k-for-2.10-pull-request' into staging

# gpg: Signature made Thu 15 Jun 2017 09:16:31 BST
# gpg:                using RSA key 0xF30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier/tags/m68k-for-2.10-pull-request:
  target-m68k: define ext_opsize
  target-m68k: move FPU helpers to fpu_helper.c
  softfloat: define 680x0 specific values
  target/m68k: fix V flag for CC_OP_SUBx

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/cody/tags/block-pull-request' into staging

# gpg: Signature made Wed 14 Jun 2017 22:54:41 BST
# gpg:                using RSA key 0xBDBE7B27C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg:                 aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg:                 aka "Jeffrey Cody <codyprime@gmail.com>"
# Primary key fingerprint: 9957 4B4D 3474 90E7 9D98  D624 BDBE 7B27 C0DE 3057

* remotes/cody/tags/block-pull-request:
  block/iscsi: enable filename option and parsing
  block/rbd: enable filename option and parsing

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Exit after clearing aarch64 interrupt mask

Exit to cpu loop so we reevaluate cpu_arm_hw_interrupts.

Tested-by: Emilio G. Cota <cota@braap.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/s390x: Exit after changing PSW mask

Exit to cpu loop so we reevaluate cpu_s390x_hw_interrupts.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target/alpha: Use tcg_gen_lookup_and_goto_ptr

Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

tcg: Increase hit rate of lookup_tb_ptr

We can call tb_htable_lookup even when the tb_jmp_cache is completely
empty.  Therefore, un-nest most of the code dependent on tb != NULL
from the read from the cache.

This improves the hit rate of lookup_tb_ptr; for instance, when booting
and immediately shutting down debian-arm, the hit rate improves from
93.2% to 99.4%.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

tcg/arm: Use ldr (literal) for goto_tb

The new placement of the TB means that we can use one insn
to load the goto_tb destination directly from the TB.

Signed-off-by: Richard Henderson <rth@twiddle.net>

tcg/arm: Try pc-relative addresses for movi

Signed-off-by: Richard Henderson <rth@twiddle.net>

tcg/arm: Remove limit on code buffer size

Since we're no longer using a direct branch, we have no
limit on the branch distance.

Signed-off-by: Richard Henderson <rth@twiddle.net>

tcg/arm: Use indirect branch for goto_tb

Signed-off-by: Richard Henderson <rth@twiddle.net>

tcg/aarch64: Use ADR in tcg_out_movi

The new placement of the TB means that we can use one insn
to load the return value for exit_tb returning the TB pointer.

Tested-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

translate-all: consolidate tb init in tb_gen_code

We are partially initializing tb in tb_alloc. Instead, fully
initialize it in tb_gen_code, which is tb_alloc's only caller.

This saves an unnecessary write to tb->cflags.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1497038122-26364-1-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

tcg: allocate TB structs before the corresponding translated code

Allocating an arbitrarily-sized array of tbs results in either
(a) a lot of memory wasted or (b) unnecessary flushes of the code
cache when we run out of TB structs in the array.

An obvious solution would be to just malloc a TB struct when needed,
and keep the TB array as an array of pointers (recall that tb_find_pc()
needs the TB array to run in O(log n)).

Perhaps a better solution, which is implemented in this patch, is to
allocate TB's right before the translated code they describe. This
results in some memory waste due to padding to have code and TBs in
separate cache lines--for instance, I measured 4.7% of padding in the
used portion of code_gen_buffer when booting aarch64 Linux on a
host with 64-byte cache lines. However, it can allow for optimizations
in some host architectures, since TCG backends could safely assume that
the TB and the corresponding translated code are very close to each
other in memory. See this message by rth for a detailed explanation:

  https://lists.gnu.org/archive/html/qemu-devel/2017-03/msg05172.html
  Subject: Re: GSoC 2017 Proposal: TCG performance enhancements
  Message-ID: <1e67644b-4b30-887e-d329-1848e94c9484@twiddle.net>

Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1496790745-314-3-git-send-email-cota@braap.org>
[rth: Simplify the arithmetic in tcg_tb_alloc]
Signed-off-by: Richard Henderson <rth@twiddle.net>

util: add cacheinfo

Add helpers to gather cache info from the host at init-time.

For now, only export the host's I/D cache line sizes, which we
will use to improve cache locality to avoid false sharing.

Suggested-by: Richard Henderson <rth@twiddle.net>
Suggested-by: Geert Martin Ijewski <gm.ijewski@web.de>
Tested-by: Geert Martin Ijewski <gm.ijewski@web.de>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1496794624-4083-1-git-send-email-cota@braap.org>
[rth: Move all implementations from tcg/ppc/]
Signed-off-by: Richard Henderson <rth@twiddle.net>

Merge remote-tracking branch 'remotes/kraxel/tags/pull-ui-20170614-1' into staging

ui: prefer gtk3 and sdl2, various fixes.

# gpg: Signature made Wed 14 Jun 2017 08:54:22 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/pull-ui-20170614-1:
  spice: don't enter opengl mode in case another UI provides opengl support
  sdl: prefer sdl2 over sdl1
  gtk: prefer gtk3 over gtk2
  spice: Use proper enum type for kbd led state
  Improve Cocoa modifier key handling

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-20170614-1' into staging

usb: bugfixes for ehci and xhci

# gpg: Signature made Wed 14 Jun 2017 08:44:01 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/pull-usb-20170614-1:
  ehci: stop recursive calls to ehci_work_bh
  xhci: only update dequeue ptr on completed transfers

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

migration: Fix race of image locking between src and dst

Previously, dst side will immediately try to lock the write byte upon
receiving QEMU_VM_EOF, but at src side, bdrv_inactivate_all() is only
done after sending it. If the src host is under load, dst may fail to
acquire the lock due to racing with the src unlocking it.

Fix this by hoisting the bdrv_inactivate_all() operation before
QEMU_VM_EOF.

N.B. A further improvement could possibly be done to cleanly handover
locks between src and dst, so that there is no window where a third QEMU
could steal the locks and prevent src and dst from running.

N.B. This commit includes a minor improvement to the error handling
by using qemu_file_set_error().

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20170616160658.32290-1-famz@redhat.com
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[PMM: noted qemu_file_set_error() use in commit as suggested by Daniel]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

qapi: Clean up qobject_input_type_number() control flow

Use the more common pattern to error out.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-6-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>

tests: add more int/number ranges checks

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-5-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[test_visitor_in_uint() tightened slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>

tests: Remove test cases for alternates of 'number' and 'int'

Alternates with both a 'number' and an 'int' branch will become
invalid when the next patch merges of QFloat and QInt into QNum.
More sophisticated alternate code could keep them valid, but since
we have no users outside tests, simply drop the tests.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-4-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

object: fix potential leak in getters

If the property is not of the requested type, the getters will leak a
QObject.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-3-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qdev: remove PropertyInfo.qtype field

Remove dependency on qapi qtype, replace a field by a few PropertyInfo
callbacks to set the default value type (introduced in commit 4f2d3d7).

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-2-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

hw/i386: fix nvdimm check error path

Commit e987c37aee1752177906847630d32477da57e705 ("hw/i386: check if
nvdimm is enabled before plugging") introduced a check to reject nvdimm
hotplug if -machine pc,nvdimm=on was not given.

This check executes after pc_dimm_memory_plug() has already completed
and does not reverse the effect of this function in the case of failure.

Perform the check before calling pc_dimm_memory_plug().  This fixes the
following abort:

  $ qemu -M accel=kvm -m 1G,slots=4,maxmem=8G \
         -object memory-backend-file,id=mem1,share=on,mem-path=nvdimm.dat,size=1G
  (qemu) device_add nvdimm,memdev=mem1
  nvdimm is not enabled: missing 'nvdimm' in '-M'
  (qemu) device_add nvdimm,memdev=mem1
  Core dumped

The backtrace is:

  #0  0x00007fffdb5b191f in raise () at /lib64/libc.so.6
  #1  0x00007fffdb5b351a in abort () at /lib64/libc.so.6
  #2  0x00007fffdb5a9da7 in __assert_fail_base () at /lib64/libc.so.6
  #3  0x00007fffdb5a9e52 in  () at /lib64/libc.so.6
  #4  0x000055555577a5fa in qemu_ram_set_idstr (new_block=0x555556747a00, name=<optimized out>, dev=dev@entry=0x555556705590) at qemu/exec.c:1709
  #5  0x0000555555a0fe86 in vmstate_register_ram (mr=mr@entry=0x55555673a0e0, dev=dev@entry=0x555556705590) at migration/savevm.c:2293
  #6  0x0000555555965088 in pc_dimm_memory_plug (dev=dev@entry=0x555556705590, hpms=hpms@entry=0x5555566bb0e0, mr=mr@entry=0x555556705630, align=<optimized out>, errp=errp@entry=0x7fffffffc660)
      at hw/mem/pc-dimm.c:110
  #7  0x000055555581d89b in pc_dimm_plug (errp=0x7fffffffc6c0, dev=0x555556705590, hotplug_dev=<optimized out>) at qemu/hw/i386/pc.c:1713
  #8  0x000055555581d89b in pc_machine_device_plug_cb (hotplug_dev=<optimized out>, dev=0x555556705590, errp=0x7fffffffc6c0) at qemu/hw/i386/pc.c:2004
  #9  0x0000555555914da6 in device_set_realized (obj=<optimized out>, value=<optimized out>, errp=0x7fffffffc7e8) at hw/core/qdev.c:926

Cc: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>