OSDN Git Service
Jakub Kicinski [Thu, 17 Mar 2022 20:56:06 +0000 (13:56 -0700)]
Merge git://git./linux/kernel/git/netdev/net
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 17 Mar 2022 19:55:26 +0000 (12:55 -0700)]
Merge tag 'net-5.17-final' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, ipsec, and wireless.
A few last minute revert / disable and fix patches came down from our
sub-trees. We're not waiting for any fixes at this point.
Current release - regressions:
- Revert "netfilter: nat: force port remap to prevent shadowing
well-known ports", restore working conntrack on asymmetric paths
- Revert "ath10k: drop beacon and probe response which leak from
other channel", restore working AP and mesh mode on QCA9984
- eth: intel: fix hang during reboot/shutdown
Current release - new code bugs:
- netfilter: nf_tables: disable register tracking, it needs more work
to cover all corner cases
Previous releases - regressions:
- ipv6: fix skb_over_panic in __ip6_append_data when (admin-only)
extension headers get specified
- esp6: fix ESP over TCP/UDP, interpret ipv6_skip_exthdr's return
value more selectively
- bnx2x: fix driver load failure when FW not present in initrd
Previous releases - always broken:
- vsock: stop destroying unrelated sockets in nested virtualization
- packet: fix slab-out-of-bounds access in packet_recvmsg()
Misc:
- add Paolo Abeni to networking maintainers!"
* tag 'net-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (26 commits)
iavf: Fix hang during reboot/shutdown
net: mscc: ocelot: fix backwards compatibility with single-chain tc-flower offload
net: bcmgenet: skip invalid partial checksums
bnx2x: fix built-in kernel driver load failure
net: phy: mscc: Add MODULE_FIRMWARE macros
net: dsa: Add missing of_node_put() in dsa_port_parse_of
net: handle ARPHRD_PIMREG in dev_is_mac_header_xmit()
Revert "ath10k: drop beacon and probe response which leak from other channel"
hv_netvsc: Add check for kvmalloc_array
iavf: Fix double free in iavf_reset_task
ice: destroy flow director filter mutex after releasing VSIs
ice: fix NULL pointer dereference in ice_update_vsi_tx_ring_stats()
Add Paolo Abeni to networking maintainers
atm: eni: Add check for dma_map_single
net/packet: fix slab-out-of-bounds access in packet_recvmsg()
net: mdio: mscc-miim: fix duplicate debugfs entry
net: phy: marvell: Fix invalid comparison in the resume and suspend functions
esp6: fix check on ipv6_skip_exthdr's return value
net: dsa: microchip: add spi_device_id tables
netfilter: nf_tables: disable register tracking
...
Linus Torvalds [Thu, 17 Mar 2022 19:40:59 +0000 (12:40 -0700)]
Merge tag 'acpi-5.17-rc9' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert recent commit that caused multiple systems to misbehave due to
firmware issues"
* tag 'acpi-5.17-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: scan: Do not add device IDs from _CID if _HID is not valid"
Linus Torvalds [Thu, 17 Mar 2022 19:36:47 +0000 (12:36 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"Four patches.
Subsystems affected by this patch series: mm/swap, kconfig, ocfs2, and
selftests"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
selftests: vm: fix clang build error multiple output files
ocfs2: fix crash when initialize filecheck kobj fails
configs/debug: restore DEBUG_INFO=y for overriding
mm: swap: get rid of livelock in swapin readahead
Yosry Ahmed [Wed, 16 Mar 2022 23:15:12 +0000 (16:15 -0700)]
selftests: vm: fix clang build error multiple output files
When building the vm selftests using clang, some errors are seen due to
having headers in the compilation command:
clang -Wall -I ../../../../usr/include -no-pie gup_test.c ../../../../mm/gup_test.h -lrt -lpthread -o .../tools/testing/selftests/vm/gup_test
clang: error: cannot specify -o when generating multiple output files
make[1]: *** [../lib.mk:146: .../tools/testing/selftests/vm/gup_test] Error 1
Rework to add the header files to LOCAL_HDRS before including ../lib.mk,
since the dependency is evaluated in '$(OUTPUT)/%:%.c $(LOCAL_HDRS)' in
file lib.mk.
Link: https://lkml.kernel.org/r/20220304000645.1888133-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joseph Qi [Wed, 16 Mar 2022 23:15:09 +0000 (16:15 -0700)]
ocfs2: fix crash when initialize filecheck kobj fails
Once s_root is set, genric_shutdown_super() will be called if
fill_super() fails. That means, we will call ocfs2_dismount_volume()
twice in such case, which can lead to kernel crash.
Fix this issue by initializing filecheck kobj before setting s_root.
Link: https://lkml.kernel.org/r/20220310081930.86305-1-joseph.qi@linux.alibaba.com
Fixes:
5f483c4abb50 ("ocfs2: add kobject for online file check")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qian Cai [Wed, 16 Mar 2022 23:15:06 +0000 (16:15 -0700)]
configs/debug: restore DEBUG_INFO=y for overriding
Previously, I failed to realize that Kees' patch [1] has not been merged
into the mainline yet, and dropped DEBUG_INFO=y too eagerly from the
mainline. As the results, "make debug.config" won't be able to flip
DEBUG_INFO=n from the existing .config. This should close the gaps of a
few weeks before Kees' patch is there, and work regardless of their
merging status anyway.
Link: https://lore.kernel.org/all/20220125075126.891825-1-keescook@chromium.org/
Link: https://lkml.kernel.org/r/20220308153524.8618-1-quic_qiancai@quicinc.com
Signed-off-by: Qian Cai <quic_qiancai@quicinc.com>
Reported-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guo Ziliang [Wed, 16 Mar 2022 23:15:03 +0000 (16:15 -0700)]
mm: swap: get rid of livelock in swapin readahead
In our testing, a livelock task was found. Through sysrq printing, same
stack was found every time, as follows:
__swap_duplicate+0x58/0x1a0
swapcache_prepare+0x24/0x30
__read_swap_cache_async+0xac/0x220
read_swap_cache_async+0x58/0xa0
swapin_readahead+0x24c/0x628
do_swap_page+0x374/0x8a0
__handle_mm_fault+0x598/0xd60
handle_mm_fault+0x114/0x200
do_page_fault+0x148/0x4d0
do_translation_fault+0xb0/0xd4
do_mem_abort+0x50/0xb0
The reason for the livelock is that swapcache_prepare() always returns
EEXIST, indicating that SWAP_HAS_CACHE has not been cleared, so that it
cannot jump out of the loop. We suspect that the task that clears the
SWAP_HAS_CACHE flag never gets a chance to run. We try to lower the
priority of the task stuck in a livelock so that the task that clears
the SWAP_HAS_CACHE flag will run. The results show that the system
returns to normal after the priority is lowered.
In our testing, multiple real-time tasks are bound to the same core, and
the task in the livelock is the highest priority task of the core, so
the livelocked task cannot be preempted.
Although cond_resched() is used by __read_swap_cache_async, it is an
empty function in the preemptive system and cannot achieve the purpose
of releasing the CPU. A high-priority task cannot release the CPU
unless preempted by a higher-priority task. But when this task is
already the highest priority task on this core, other tasks will not be
able to be scheduled. So we think we should replace cond_resched() with
schedule_timeout_uninterruptible(1), schedule_timeout_interruptible will
call set_current_state first to set the task state, so the task will be
removed from the running queue, so as to achieve the purpose of giving
up the CPU and prevent it from running in kernel mode for too long.
(akpm: ugly hack becomes uglier. But it fixes the issue in a
backportable-to-stable fashion while we hopefully work on something
better)
Link: https://lkml.kernel.org/r/20220221111749.1928222-1-cgel.zte@gmail.com
Signed-off-by: Guo Ziliang <guo.ziliang@zte.com.cn>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reviewed-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Reviewed-by: Jiang Xuexin <jiang.xuexin@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roger Quadros <rogerq@kernel.org>
Cc: Ziliang Guo <guo.ziliang@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ivan Vecera [Thu, 17 Mar 2022 10:45:24 +0000 (11:45 +0100)]
iavf: Fix hang during reboot/shutdown
Recent commit
974578017fc1 ("iavf: Add waiting so the port is
initialized in remove") adds a wait-loop at the beginning of
iavf_remove() to ensure that port initialization is finished
prior unregistering net device. This causes a regression
in reboot/shutdown scenario because in this case callback
iavf_shutdown() is called and this callback detaches the device,
makes it down if it is running and sets its state to __IAVF_REMOVE.
Later shutdown callback of associated PF driver (e.g. ice_shutdown)
is called. That callback calls among other things sriov_disable()
that calls indirectly iavf_remove() (see stack trace below).
As the adapter state is already __IAVF_REMOVE then the mentioned
loop is end-less and shutdown process hangs.
The patch fixes this by checking adapter's state at the beginning
of iavf_remove() and skips the rest of the function if the adapter
is already in remove state (shutdown is in progress).
Reproducer:
1. Create VF on PF driven by ice or i40e driver
2. Ensure that the VF is bound to iavf driver
3. Reboot
[52625.981294] sysrq: SysRq : Show Blocked State
[52625.988377] task:reboot state:D stack: 0 pid:17359 ppid: 1 f2
[52625.996732] Call Trace:
[52625.999187] __schedule+0x2d1/0x830
[52626.007400] schedule+0x35/0xa0
[52626.010545] schedule_hrtimeout_range_clock+0x83/0x100
[52626.020046] usleep_range+0x5b/0x80
[52626.023540] iavf_remove+0x63/0x5b0 [iavf]
[52626.027645] pci_device_remove+0x3b/0xc0
[52626.031572] device_release_driver_internal+0x103/0x1f0
[52626.036805] pci_stop_bus_device+0x72/0xa0
[52626.040904] pci_stop_and_remove_bus_device+0xe/0x20
[52626.045870] pci_iov_remove_virtfn+0xba/0x120
[52626.050232] sriov_disable+0x2f/0xe0
[52626.053813] ice_free_vfs+0x7c/0x340 [ice]
[52626.057946] ice_remove+0x220/0x240 [ice]
[52626.061967] ice_shutdown+0x16/0x50 [ice]
[52626.065987] pci_device_shutdown+0x34/0x60
[52626.070086] device_shutdown+0x165/0x1c5
[52626.074011] kernel_restart+0xe/0x30
[52626.077593] __do_sys_reboot+0x1d2/0x210
[52626.093815] do_syscall_64+0x5b/0x1a0
[52626.097483] entry_SYSCALL_64_after_hwframe+0x65/0xca
Fixes:
974578017fc1 ("iavf: Add waiting so the port is initialized in remove")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://lore.kernel.org/r/20220317104524.2802848-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Wed, 16 Mar 2022 19:21:17 +0000 (21:21 +0200)]
net: mscc: ocelot: fix backwards compatibility with single-chain tc-flower offload
ACL rules can be offloaded to VCAP IS2 either through chain 0, or, since
the blamed commit, through a chain index whose number encodes a specific
PAG (Policy Action Group) and lookup number.
The chain number is translated through ocelot_chain_to_pag() into a PAG,
and through ocelot_chain_to_lookup() into a lookup number.
The problem with the blamed commit is that the above 2 functions don't
have special treatment for chain 0. So ocelot_chain_to_pag(0) returns
filter->pag = 224, which is in fact -32, but the "pag" field is an u8.
So we end up programming the hardware with VCAP IS2 entries having a PAG
of 224. But the way in which the PAG works is that it defines a subset
of VCAP IS2 filters which should match on a packet. The default PAG is
0, and previous VCAP IS1 rules (which we offload using 'goto') can
modify it. So basically, we are installing filters with a PAG on which
no packet will ever match. This is the hardware equivalent of adding
filters to a chain which has no 'goto' to it.
Restore the previous functionality by making ACL filters offloaded to
chain 0 go to PAG 0 and lookup number 0. The choice of PAG is clearly
correct, but the choice of lookup number isn't "as before" (which was to
leave the lookup a "don't care"). However, lookup 0 should be fine,
since even though there are ACL actions (policers) which have a
requirement to be used in a specific lookup, that lookup is 0.
Fixes:
226e9cd82a96 ("net: mscc: ocelot: only install TCAM entries into a specific lookup and PAG")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220316192117.2568261-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Doug Berger [Thu, 17 Mar 2022 01:28:12 +0000 (18:28 -0700)]
net: bcmgenet: skip invalid partial checksums
The RXCHK block will return a partial checksum of 0 if it encounters
a problem while receiving a packet. Since a 1's complement sum can
only produce this result if no bits are set in the received data
stream it is fair to treat it as an invalid partial checksum and
not pass it up the stack.
Fixes:
810155397890 ("net: bcmgenet: use CHECKSUM_COMPLETE for NETIF_F_RXCSUM")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220317012812.1313196-1-opendmb@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Manish Chopra [Wed, 16 Mar 2022 21:46:13 +0000 (14:46 -0700)]
bnx2x: fix built-in kernel driver load failure
Commit
b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0")
added request_firmware() logic in probe() which caused
load failure when firmware file is not present in initrd (below),
as access to firmware file is not feasible during probe.
Direct firmware load for bnx2x/bnx2x-e2-7.13.15.0.fw failed with error -2
Direct firmware load for bnx2x/bnx2x-e2-7.13.21.0.fw failed with error -2
This patch fixes this issue by -
1. Removing request_firmware() logic from the probe()
such that .ndo_open() handle it as it used to handle
it earlier
2. Given request_firmware() is removed from probe(), so
driver has to relax FW version comparisons a bit against
the already loaded FW version (by some other PFs of same
adapter) to allow different compatible/close enough FWs with which
multiple PFs may run with (in different environments), as the
given PF who is in probe flow has no idea now with which firmware
file version it is going to initialize the device in ndo_open()
Link: https://lore.kernel.org/all/46f2d9d9-ae7f-b332-ddeb-b59802be2bab@molgen.mpg.de/
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Fixes:
b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20220316214613.6884-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Juerg Haefliger [Wed, 16 Mar 2022 15:18:35 +0000 (16:18 +0100)]
net: phy: mscc: Add MODULE_FIRMWARE macros
The driver requires firmware so define MODULE_FIRMWARE so that modinfo
provides the details.
Fixes:
fa164e40c53b ("net: phy: mscc: split the driver into separate files")
Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Link: https://lore.kernel.org/r/20220316151835.88765-1-juergh@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guo Zhengkui [Wed, 16 Mar 2022 09:28:57 +0000 (17:28 +0800)]
selftests: net: fix array_size.cocci warning
Fix array_size.cocci warning in tools/testing/selftests/net.
Use `ARRAY_SIZE(arr)` instead of forms like `sizeof(arr)/sizeof(arr[0])`.
It has been tested with gcc (Debian 8.3.0-6) 8.3.0.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Link: https://lore.kernel.org/r/20220316092858.9398-1-guozhengkui@vivo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Dan Carpenter [Wed, 16 Mar 2022 08:37:44 +0000 (11:37 +0300)]
net: stmmac: clean up impossible condition
This code works but it has a static checker warning:
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1687 init_dma_rx_desc_rings()
warn: always true condition '(queue >= 0) => (0-u32max >= 0)'
Obviously, it makes no sense to check if an unsigned int is >= 0. What
prevents this code from being a forever loop is that later there is a
separate check for if (queue == 0).
The "queue" variable is less than MTL_MAX_RX_QUEUES (8) so it can easily
fit in an int type. Any larger value for "queue" would lead to an array
overflow when we assign "rx_q = &priv->rx_queue[queue]".
Fixes:
de0b90e52a11 ("net: stmmac: rearrange RX and TX desc init into per-queue basis")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220316083744.GB30941@kili
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Miaoqian Lin [Wed, 16 Mar 2022 08:26:02 +0000 (08:26 +0000)]
net: dsa: Add missing of_node_put() in dsa_port_parse_of
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes:
6d4e5c570c2d ("net: dsa: get port type at parse time")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220316082602.10785-1-linmq006@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Eyal Birger [Wed, 16 Mar 2022 06:15:57 +0000 (08:15 +0200)]
net: geneve: support IPv4/IPv6 as inner protocol
This patch adds support for encapsulating IPv4/IPv6 within GENEVE.
In order to use this, a new IFLA_GENEVE_INNER_PROTO_INHERIT flag needs
to be provided at device creation. This property cannot be changed for
the time being.
In case IP traffic is received on a non-tun device the drop count is
increased.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Link: https://lore.kernel.org/r/20220316061557.431872-1-eyal.birger@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Thu, 17 Mar 2022 09:49:30 +0000 (10:49 +0100)]
Merge branch 'net-mvneta-armada-98dx2530-soc'
Chris Packham says:
====================
net: mvneta: Armada 98DX2530 SoC
This is split off from [1] to let it go in via net-next rather than waiting for
the rest of the series to land.
[1] - https://lore.kernel.org/lkml/
20220314213143.
2404162-1-chris.packham@alliedtelesis.co.nz/
====================
Link: https://lore.kernel.org/r/20220315215207.2746793-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Chris Packham [Tue, 15 Mar 2022 21:52:07 +0000 (10:52 +1300)]
net: mvneta: Add support for 98DX2530 Ethernet port
The 98DX2530 SoC is similar to the Armada 3700 except it needs a
different MBUS window configuration. Add a new compatible string to
identify this device and the required MBUS window configuration.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Chris Packham [Tue, 15 Mar 2022 21:52:06 +0000 (10:52 +1300)]
dt-bindings: net: mvneta: Add marvell,armada-ac5-neta
The out of band port on the 98DX2530 SoC is similar to the armada-3700
except it requires a slightly different MBUS window configuration. Add a
new compatible string so this difference can be accounted for.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jonathan Lemon [Tue, 15 Mar 2022 19:46:26 +0000 (12:46 -0700)]
ptp: ocp: Fix PTP_PF_* verification requests
Update and check functionality for pin configuration requests:
PTP_PF_NONE: requests "IN: None", disabling the pin.
# testptp -d /dev/ptp3 -L3,0 -i1
set pin function okay
# cat sma4
IN: None
PTP_PF_EXTTS: should configure external timestamps, but since the
timecard can steer inputs to multiple inputs as well as timestamps,
allow the request, but don't change configurations.
# testptp -d /dev/ptp3 -L3,1 -i1
set pin function okay
(no functional or configuration change here yet)
PTP_PF_PEROUT: Channel 0 is the PHC, at 1PPS. Channels 1-4 are
the programmable frequency generators.
# fails because period is not 1PPS.
# testptp -d /dev/ptp3 -L3,2 -i0 -p
500000000
PTP_PEROUT_REQUEST: Invalid argument
# testptp -d /dev/ptp3 -L3,2 -i0 -p
1000000000
periodic output request okay
# cat sma4
OUT: PHC
# testptp -d /dev/ptp3 -L3,2 -i1 -p
500000000 -w
200000000
periodic output request okay
# cat sma4
OUT: GEN1
# cat gen1/signal
500000000 40 0 1 2022-03-10T23:55:26 TAI
# cat gen1/running
1
# testptp -d /dev/ptp3 -L3,2 -i1 -p 0
periodic output request okay
# cat gen1/running
0
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/r/20220315194626.1895-1-jonathan.lemon@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Thu, 17 Mar 2022 02:59:43 +0000 (19:59 -0700)]
Merge branch 'flow_offload-add-tc-vlan-push_eth-and-pop_eth-actions'
Roi Dayan says:
====================
flow_offload: add tc vlan push_eth and pop_eth actions
Offloading vlan push_eth and pop_eth actions is needed in order to
correctly offload MPLSoUDP encap and decap flows, this series extends
the flow offload API to support these actions and updates mlx5 to
parse them.
====================
Link: https://lore.kernel.org/r/20220315110211.1581468-1-roid@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maor Dickman [Tue, 15 Mar 2022 11:02:11 +0000 (13:02 +0200)]
net/mlx5e: MPLSoUDP encap, support action vlan pop_eth explicitly
Currently the MPLSoUDP encap offload does the L2 pop implicitly
while adding such action explicitly (vlan eth_push) will cause
the rule to not be offloaded.
Solve it by adding offload support for vlan eth_push in case of
MPLSoUDP decap case.
Flow example:
filter root protocol ip pref 1 flower chain 0
filter root protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
dst_ip 2.2.2.22
src_ip 2.2.2.21
in_hw in_hw_count 1
action order 1: vlan pop_eth pipe
index 1 ref 1 bind 1
used_hw_stats delayed
action order 2: mpls push protocol mpls_uc label 555 tc 3 ttl 255 pipe
index 1 ref 1 bind 1
used_hw_stats delayed
action order 3: tunnel_key set
src_ip 8.8.8.21
dst_ip 8.8.8.22
dst_port 6635
csum
tos 0x4
ttl 6 pipe
index 1 ref 1 bind 1
used_hw_stats delayed
action order 4: mirred (Egress Redirect to device bareudp0) stolen
index 1 ref 1 bind 1
used_hw_stats delayed
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maor Dickman [Tue, 15 Mar 2022 11:02:10 +0000 (13:02 +0200)]
net/mlx5e: MPLSoUDP decap, use vlan push_eth instead of pedit
Currently action pedit of source and destination MACs is used
to fill the MACs in L2 push step in MPLSoUDP decap offload,
this isn't aligned to tc SW which use vlan eth_push action
to do this.
To fix that, offload support for vlan veth_push action is
added together with mpls pop action, and deprecate the use
of pedit of MACs.
Flow example:
filter protocol mpls_uc pref 1 flower chain 0
filter protocol mpls_uc pref 1 flower chain 0 handle 0x1
eth_type 8847
mpls_label 555
enc_dst_port 6635
in_hw in_hw_count 1
action order 1: tunnel_key unset pipe
index 2 ref 1 bind 1
used_hw_stats delayed
action order 2: mpls pop protocol ip pipe
index 2 ref 1 bind 1
used_hw_stats delayed
action order 3: vlan push_eth dst_mac de:a2:ec:d6:69:c8 src_mac de:a2:ec:d6:69:c8 pipe
index 2 ref 1 bind 1
used_hw_stats delayed
action order 4: mirred (Egress Redirect to device enp8s0f0_0) stolen
index 2 ref 1 bind 1
used_hw_stats delayed
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maor Dickman [Tue, 15 Mar 2022 11:02:09 +0000 (13:02 +0200)]
net/sched: add vlan push_eth and pop_eth action to the hardware IR
Add vlan push_eth and pop_eth action to the hardware intermediate
representation model which would subsequently allow it to be used
by drivers for offload.
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nicolas Dichtel [Tue, 15 Mar 2022 09:20:08 +0000 (10:20 +0100)]
net: handle ARPHRD_PIMREG in dev_is_mac_header_xmit()
This kind of interface doesn't have a mac header. This patch fixes
bpf_redirect() to a PIM interface.
Fixes:
27b29f63058d ("bpf: add bpf_redirect() helper")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220315092008.31423-1-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tobias Waldekranz [Tue, 15 Mar 2022 23:30:33 +0000 (00:30 +0100)]
net: dsa: Never offload FDB entries on standalone ports
If a port joins a bridge that it can't offload, it will fallback to
standalone mode and software bridging. In this case, we never want to
offload any FDB entries to hardware either.
Previously, for host addresses, we would eventually end up in
dsa_port_bridge_host_fdb_add, which would unconditionally dereference
dp->bridge and cause a segfault.
Fixes:
c26933639b54 ("net: dsa: request drivers to perform FDB isolation")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220315233033.1468071-1-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yang Li [Tue, 15 Mar 2022 23:56:03 +0000 (07:56 +0800)]
phy: Remove duplicated include in phy-fsl-lynx-28g.c
Fix following includecheck warning:
./drivers/phy/freescale/phy-fsl-lynx-28g.c: linux/workqueue.h is
included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220315235603.59481-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Minghao Chi [Wed, 16 Mar 2022 01:24:44 +0000 (01:24 +0000)]
net: mv643xx_eth: undo some opreations in mv643xx_eth_probe
Cannot directly return platform_get_irq return irq, there
are operations that need to be undone.
Fixes:
bf2b83425b59 ("net: mv643xx_eth: use platform_get_irq() instead of platform_get_resource()")
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220316012444.2126070-1-chi.minghao@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Colin Ian King [Tue, 15 Mar 2022 22:29:14 +0000 (22:29 +0000)]
net: hns3: Fix spelling mistake "does't" -> "doesn't"
There is a spelling mistake in a dev_warn message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220315222914.2960786-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Colin Ian King [Tue, 15 Mar 2022 22:26:15 +0000 (22:26 +0000)]
gve: Fix spelling mistake "droping" -> "dropping"
There is a spelling mistake in a netdev_warn warning. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220315222615.2960504-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wujunwen [Tue, 15 Mar 2022 12:28:57 +0000 (12:28 +0000)]
net: ksz884x: optimize netdev_open flow and remove static variable
remove the static next_jiffies variable, and reinitialize next_jiffies
to simplify netdev_open
Signed-off-by: wujunwen <wudaemon@163.com>
Link: https://lore.kernel.org/r/20220315122857.78601-1-wudaemon@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Meng Tang [Tue, 15 Mar 2022 07:48:51 +0000 (15:48 +0800)]
hamradio: Fix wrong assignment of 'bbc->cfg.loopback'
In file hamradio/baycom_epp.c, the baycom_setmode interface, there
is a problem with improper use of strstr.
Suppose that when modestr="noloopback", both conditions which are
'strstr(modestr,"noloopback")' and 'strstr(modestr,"loopback")'
will be true(not NULL), this lead the bc->cfg.loopback variable
will be first assigned to 0, and then reassigned to 1.
This will cause 'bc->cfg.loopback = 0' will never take effect. That
obviously violates the logic of the code, so adjust the order of
their execution to solve the problem.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220315074851.6456-1-tangmeng@uniontech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hangbin Liu [Tue, 15 Mar 2022 06:26:18 +0000 (14:26 +0800)]
bareudp: use ipv6_mod_enabled to check if IPv6 enabled
bareudp_create_sock() use AF_INET6 by default if IPv6 CONFIG enabled.
But if user start kernel with ipv6.disable=1, the bareudp sock will
created failed, which cause the interface open failed even with ethertype
ip. e.g.
# ip link add bareudp1 type bareudp dstport 2 ethertype ip
# ip link set bareudp1 up
RTNETLINK answers: Address family not supported by protocol
Fix it by using ipv6_mod_enabled() to check if IPv6 enabled. There is
no need to check IS_ENABLED(CONFIG_IPV6) as ipv6_mod_enabled() will
return false when CONFIG_IPV6 no enabled in include/linux/ipv6.h.
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes:
571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20220315062618.156230-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 17 Mar 2022 01:56:26 +0000 (18:56 -0700)]
Merge tag 'linux-can-next-for-5.18-
20220316' of git://git./linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-03-16
the first 3 patches are by Oliver Hartkopp target the CAN ISOTP
protocol and fix a problem found by syzbot in isotp_bind(), return
-EADDRNOTAVAIL in unbound sockets in isotp_recvmsg() and add support
for MSG_TRUNC to isotp_recvmsg().
Amit Kumar Mahapatra converts the xilinx,can device tree bindings to
yaml.
The last patch is by Julia Lawall and fixes typos in the ucan driver.
* tag 'linux-can-next-for-5.18-
20220316' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: ucan: fix typos in comments
dt-bindings: can: xilinx_can: Convert Xilinx CAN binding to YAML
can: isotp: support MSG_TRUNC flag when reading from socket
can: isotp: return -EADDRNOTAVAIL when reading from unbound socket
can: isotp: sanitize CAN ID checks in isotp_bind()
====================
Link: https://lore.kernel.org/r/20220316204710.716341-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Julia Lawall [Mon, 14 Mar 2022 11:53:51 +0000 (12:53 +0100)]
can: ucan: fix typos in comments
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Link: https://lore.kernel.org/all/20220314115354.144023-28-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Amit Kumar Mahapatra [Wed, 16 Mar 2022 17:11:05 +0000 (22:41 +0530)]
dt-bindings: can: xilinx_can: Convert Xilinx CAN binding to YAML
Convert Xilinx CAN binding documentation to YAML.
Link: https://lore.kernel.org/all/20220316171105.17654-1-amit.kumar-mahapatra@xilinx.com
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Wed, 16 Mar 2022 16:42:58 +0000 (17:42 +0100)]
can: isotp: support MSG_TRUNC flag when reading from socket
When providing the MSG_TRUNC flag via recvmsg() syscall the return value
provides the real length of the packet or datagram, even when it was longer
than the passed buffer.
Fixes:
e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://github.com/linux-can/can-utils/issues/347#issuecomment-1065932671
Link: https://lore.kernel.org/all/20220316164258.54155-3-socketcan@hartkopp.net
Suggested-by: Derek Will <derekrobertwill@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Wed, 16 Mar 2022 16:42:57 +0000 (17:42 +0100)]
can: isotp: return -EADDRNOTAVAIL when reading from unbound socket
When reading from an unbound can-isotp socket the syscall blocked
indefinitely. As unbound sockets (without given CAN address information)
do not make sense anyway we directly return -EADDRNOTAVAIL on read()
analogue to the known behavior from sendmsg().
Fixes:
e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://github.com/linux-can/can-utils/issues/349
Link: https://lore.kernel.org/all/20220316164258.54155-2-socketcan@hartkopp.net
Suggested-by: Derek Will <derekrobertwill@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Wed, 16 Mar 2022 16:42:56 +0000 (17:42 +0100)]
can: isotp: sanitize CAN ID checks in isotp_bind()
Syzbot created an environment that lead to a state machine status that
can not be reached with a compliant CAN ID address configuration.
The provided address information consisted of CAN ID 0x6000001 and 0xC28001
which both boil down to 11 bit CAN IDs 0x001 in sending and receiving.
Sanitize the SFF/EFF CAN ID values before performing the address checks.
Fixes:
e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/all/20220316164258.54155-1-socketcan@hartkopp.net
Reported-by: syzbot+2339c27f5c66c652843e@syzkaller.appspotmail.com
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Jakub Kicinski [Wed, 16 Mar 2022 19:56:49 +0000 (12:56 -0700)]
Merge branch 'devlink-expose-instance-locking-and-simplify-port-splitting'
Jakub Kicinski says:
====================
devlink: expose instance locking and simplify port splitting
This series puts the devlink ports fully under the devlink instance
lock's protection. As discussed in the past it implements my preferred
solution of exposing the instance lock to the drivers. This way drivers
which want to support port splitting can lock the devlink instance
themselves on the probe path, and we can take that lock in the core
on the split/unsplit paths.
nfp and mlxsw are converted, with slightly deeper changes done in
nfp since I'm more familiar with that driver.
Now that the devlink port is protected we can pass a pointer to
the drivers, instead of passing a port index and forcing the drivers
to do their own lookups. Both nfp and mlxsw can container_of() to
their own structures.
====================
Link: https://lore.kernel.org/r/20220315060009.1028519-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 15 Mar 2022 06:00:09 +0000 (23:00 -0700)]
devlink: pass devlink_port to port_split / port_unsplit callbacks
Now that devlink ports are protected by the instance lock
it seems natural to pass devlink_port as an argument to
the port_split / port_unsplit callbacks.
This should save the drivers from doing a lookup.
In theory drivers may have supported unsplitting ports
which were not registered prior to this change.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 15 Mar 2022 06:00:08 +0000 (23:00 -0700)]
devlink: hold the instance lock in port_split / port_unsplit callbacks
Let the core take the devlink instance lock around port splitting
and remove the now redundant locking in the drivers.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 15 Mar 2022 06:00:07 +0000 (23:00 -0700)]
eth: mlxsw: switch to explicit locking for port registration
Explicitly lock the devlink instance and use devl_ API.
This will be used by the subsequent patch to invoke
.port_split / .port_unsplit callbacks with devlink
instance lock held.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 15 Mar 2022 06:00:06 +0000 (23:00 -0700)]
eth: nfp: replace driver's "pf" lock with devlink instance lock
The whole reason for existence of the pf mutex is that we could
not lock the devlink instance around port splitting. There are
more types of reconfig which can make ports appear or disappear.
Now that the devlink instance lock is exposed to drivers and
"locked" helpers exist we can switch to using the devlink lock
directly.
Next patches will move the locking inside .port_(un)split to
the core.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 15 Mar 2022 06:00:05 +0000 (23:00 -0700)]
eth: nfp: wrap locking assertions in helpers
We can replace the PF lock with devlink instance lock in subsequent
changes. To make the patches easier to comprehend and limit line
lengths - factor out the existing locking assertions.
No functional changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 15 Mar 2022 06:00:04 +0000 (23:00 -0700)]
devlink: expose instance locking and add locked port registering
It should be familiar and beneficial to expose devlink instance
lock to the drivers. This way drivers can block devlink from
calling them during critical sections without breakneck locking.
Add port helpers, port splitting callbacks will be the first
target.
Use 'devl_' prefix for "explicitly locked" API. Initial RFC used
'__devlink' but that's too much typing.
devl_lock_is_held() is not defined without lockdep, which is
the same behavior as lockdep_is_held() itself.
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 16 Mar 2022 18:57:46 +0000 (11:57 -0700)]
Merge tag 'efi-urgent-for-v5.17-3' of git://git./linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
"Avoid spurious warnings about unknown boot parameters"
* tag 'efi-urgent-for-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: fix return value of __setup handlers
Linus Torvalds [Wed, 16 Mar 2022 18:50:35 +0000 (11:50 -0700)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a bug where qcom-rng can return a buffer that is not
completely filled with random data"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: qcom-rng - ensure buffer for generate is completely filled
Jakub Kicinski [Wed, 16 Mar 2022 18:39:36 +0000 (11:39 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2022-03-16
1) Fix a kernel-info-leak in pfkey.
From Haimin Zhang.
2) Fix an incorrect check of the return value of ipv6_skip_exthdr.
From Sabrina Dubroca.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
esp6: fix check on ipv6_skip_exthdr's return value
af_key: add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
====================
Link: https://lore.kernel.org/r/20220316121142.3142336-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 16 Mar 2022 18:08:09 +0000 (11:08 -0700)]
Merge tag 'wireless-2022-03-16' of git://git./linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v5.17
Third set of fixes for v5.17. We have only one revert to fix an ath10k
regression.
* tag 'wireless-2022-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
Revert "ath10k: drop beacon and probe response which leak from other channel"
====================
Link: https://lore.kernel.org/r/20220316130249.B5225C340EC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David S. Miller [Wed, 16 Mar 2022 12:49:23 +0000 (12:49 +0000)]
Merge branch 'mediatek-next'
Biao Huang says:
====================
MediaTek Ethernet Patches on MT8195
Changes in v13:
1. add reviewed-by in "net: dt-bindings: dwmac: add support for mt8195"
as Rob's comments.
2. drop num_clks defined in mediatek_dwmac_plat_data struct in "stmmac:
dwmac-mediatek: Reuse more common features" as Angelo's comments.
Changes in v12:
1. add a new patch "stmmac: dwmac-mediatek: re-arrange clock setting" to
this series, to simplify clock handling in driver, which benefits to
binding file mediatek-dwmac.yaml.
2. modify dt-binding description in patch "net: dt-bindings: dwmac: add
support for mt8195" as Rob's comments in v10 series, put mac_cg to the
end of clock list.
3. there are small changes in patch "stmmac: dwmac-mediatek: add support
for mt8195", @AngeloGioacchino, please review it kindly.
Changes in v11:
1. add reivewed-by in "net: dt-bindings: dwmac: Convert mediatek-dwmac to
DT schema" as Rob's comments.
2. fall back "net: dt-bindings: dwmac: add support for mt8195" to v8 version
as mentioned in previous reply(https://patchwork.ozlabs.org/project/devicetree-bindings/patch/
20211216055328.15953-7-biao.huang@mediatek.com/):
2.1 there is already a special clock named "rmii_internal", which need to
be put to the end of the clock list(driver special handling),
so we can't simply put new "mac_cg" for mt8195 to the end of the clock
list.
2.2 we prefer the if-then schema, which will make mt8195 clock list clearer
with some duplicated information.
2.3 we expect the future IC will follow mt2712 or mt8195, so we only need
add new IC name to compatible list for future IC, and will not make the
clock list binding files worse.
Changes in v10:
1. add detailed description in "arm64: dts: mt2712: update ethernet
device node" to make the modifications clearer as Matthias's comments.
2. modify dt-binding description as Rob's comments, and "make dtbs_check" runs
pass locally with "arm64: dts: mt2712: update ethernet device node"
in this series.
Changes in v9:
1. remove oneOf for 1 entry as Rob's comments.
2. add new clocks to the end of existing clocks to simplify
the binding as Rob's comments.
Changes in v8:
1. add acked-by in "stmmac: dwmac-mediatek: add platform level clocks
management" patch
Changes in v7:
1. fix uninitialized warning as Jakub's comments.
Changes in v6:
1. update commit message as Jakub's comments.
2. split mt8195 eth dts patch("arm64: dts: mt8195: add ethernet device
node") from this series, since mt8195 dtsi/dts basic patches is still
under reviewing.
https://patchwork.kernel.org/project/linux-mediatek/list/?series=579071
we'll resend mt8195 eth dts patch once all the dependent patches are
accepted.
Changes in v5:
1. remove useless inclusion in dwmac-mediatek.c as Angelo's comments.
2. add acked-by in "net-next: stmmac: dwmac-mediatek: add support for
mt8195" patch
Changes in v4:
1. add changes in commit message in "net-next: dt-bindings: dwmac:
Convert mediatek-dwmac to DT schema" patch.
2. remove ethernet-controller.yaml since snps,dwmac.yaml already include it.
Changes in v3:
1. Add prefix "net-next" to support new IC as Denis's suggestion.
2. Split dt-bindings to two patches, one for conversion, and the other for
new IC.
3. add a new patch to update device node in mt2712-evb.dts to accommodate to
changes in driver.
4. remove unnecessary wrapper as Angelo's suggestion.
5. Add acked-by in "net-next: stmmac: dwmac-mediatek: Reuse more common
features" patch.
Changes in v2:
1. fix errors/warnings in mediatek-dwmac.yaml with upgraded dtschema tools
Changes in v1:
This series include 5 patches:
1. add platform level clocks management for dwmac-mediatek
2. resue more common features defined in stmmac_platform.c
3. add ethernet entry for mt8195
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Biao Huang [Mon, 14 Mar 2022 07:57:13 +0000 (15:57 +0800)]
net: dt-bindings: dwmac: add support for mt8195
Add binding document for the ethernet on mt8195.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Biao Huang [Mon, 14 Mar 2022 07:57:12 +0000 (15:57 +0800)]
stmmac: dwmac-mediatek: add support for mt8195
Add Ethernet support for MediaTek SoCs from the mt8195 family.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Biao Huang [Mon, 14 Mar 2022 07:57:11 +0000 (15:57 +0800)]
net: dt-bindings: dwmac: Convert mediatek-dwmac to DT schema
Convert mediatek-dwmac to DT schema, and delete old mediatek-dwmac.txt.
And there are some changes in .yaml than .txt, others almost keep the same:
1. compatible "const: snps,dwmac-4.20".
2. delete "snps,reset-active-low;" in example, since driver remove this
property long ago.
3. add "snps,reset-delay-us = <0 10000 10000>" in example.
4. the example is for rgmii interface, keep related properties only.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Biao Huang [Mon, 14 Mar 2022 07:57:10 +0000 (15:57 +0800)]
arm64: dts: mt2712: update ethernet device node
Since there are some changes in ethernet driver:
update ethernet device node in dts to accommodate to it.
1. stmmac_probe_config_dt() in stmmac_platform.c will initialize specified
parameters according to compatible string "snps,dwmac-4.20a", then,
dwmac-mediatek.c can skip the initialization if add compatible string
"snps,dwmac-4.20a" in eth device node.
2. commit
882007ed7832 ("net-next: dt-binding: dwmac-mediatek: add more
description for RMII") added rmii internal support, we should add
corresponding clocks/clocks-names in eth device node.
3. add "snps,reset-delays-us = <0 10000 10000>;" to ensure reset delay
can meet PHY requirement.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Biao Huang [Mon, 14 Mar 2022 07:57:09 +0000 (15:57 +0800)]
stmmac: dwmac-mediatek: re-arrange clock setting
The rmii_internal clock is needed only when PHY
interface is RMII, and reference clock is from MAC.
Re-arrange the clock setting as following:
1. the optional "rmii_internal" is controlled by devm_clk_get(),
2. other clocks still be configured by devm_clk_bulk_get().
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Biao Huang [Mon, 14 Mar 2022 07:57:08 +0000 (15:57 +0800)]
stmmac: dwmac-mediatek: Reuse more common features
This patch makes dwmac-mediatek reuse more features
supported by stmmac_platform.c.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Biao Huang [Mon, 14 Mar 2022 07:57:07 +0000 (15:57 +0800)]
stmmac: dwmac-mediatek: add platform level clocks management
This patch implements clks_config callback for dwmac-mediatek platform,
which could support platform level clocks management.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kalle Valo [Tue, 15 Mar 2022 15:54:55 +0000 (17:54 +0200)]
Revert "ath10k: drop beacon and probe response which leak from other channel"
This reverts commit
3bf2537ec2e33310b431b53fd84be8833736c256.
I was reported privately that this commit breaks AP and mesh mode on QCA9984
(firmware 10.4-3.9.0.2-00156). So revert the commit to fix the regression.
There was a conflict due to cfg80211 API changes but that was easy to fix.
Fixes:
3bf2537ec2e3 ("ath10k: drop beacon and probe response which leak from other channel")
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220315155455.20446-1-kvalo@kernel.org
Rafael J. Wysocki [Wed, 16 Mar 2022 10:23:05 +0000 (11:23 +0100)]
Revert "ACPI: scan: Do not add device IDs from _CID if _HID is not valid"
Revert commit
e38f9ff63e6d ("ACPI: scan: Do not add device IDs from _CID
if _HID is not valid"), because it has introduced regressions on
multiple systems, even though it only has effect on clearly invalid
firmware.
Reported-by: Pierre-Louis Bossart <notifications@github.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
David S. Miller [Wed, 16 Mar 2022 10:17:22 +0000 (10:17 +0000)]
Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2022-03-15
Jacob Keller says:
The ice_sriov.c file now houses almost all of the virtualization code in the
ice driver. This includes both Single Root specific implementation as well
as generic functionality such as the virtchnl interface.
We are planning to implement support for Scalable IOV in the ice driver in
the future. This implementation will want to use the generic functionality
in ice_sriov.c
Rather than dump the Scalable IOV code into ice_sriov.c, we will want to
implement it in a separate file, ice_siov.c
To help with this, refactor the code in ice_sriov.c and split the generic
functionality out into separate files.
Reorganize code to make the non-implementation specific bits into new files
with the following general guidelines:
* ice_vf_lib.[ch]
Basic VF structures and accessors. This is where scheme-independent
code will reside.
* ice_virtchnl.[ch]
Virtchnl message handling. This is where the bulk of the logic for
processing messages from VFs using the virtchnl messaging scheme will
reside. This is separated from ice_vf_lib.c because it is somewhat
distinct and stand alone.
* ice_sriov.[ch]
Single Root IOV implementation, including initialization and the
routines for interacting with SR-IOV based netdev operations.
* (future) ice_siov.[ch]
Scalable IOV implementation.
The end goal is to make it easier to re-use the generic parts of the
virtualization logic while keeping separate the concerns of the Single Root
implementation.
In addition to the pure code moves, this series has a reset refactor which
clean up the functionality to make it easier to reuse the reset code. A new
ops table is introduced to make the VF reset logic more generic. The Single
Root specific details are implemented in ice_sriov.c. A future series
implementing Scalable IOV support will use this ops table to allow re-use of
the reset logic which is now in ice_vf_lib.c
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 16 Mar 2022 10:07:43 +0000 (10:07 +0000)]
Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue
====================
Intel Wired LAN Driver Updates 2022-03-15
This series contains updates to ice and iavf drivers.
Maciej adjusts null check logic on Tx ring to prevent possible NULL
pointer dereference for ice.
Sudheer moves destruction of Flow Director lock as it was being accessed
after destruction for ice.
Przemyslaw removes an excess mutex unlock as it was being double
unlocked for iavf.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiasheng Jiang [Mon, 14 Mar 2022 02:01:25 +0000 (10:01 +0800)]
hv_netvsc: Add check for kvmalloc_array
As the potential failure of the kvmalloc_array(),
it should be better to check and restore the 'data'
if fails in order to avoid the dereference of the
NULL pointer.
Fixes:
6ae746711263 ("hv_netvsc: Add per-cpu ethtool stats for netvsc")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220314020125.2365084-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Casper Andersson [Mon, 14 Mar 2022 16:09:18 +0000 (17:09 +0100)]
net: sparx5: Use Switchdev fdb events for managing fdb entries
Changes the handling of fdb entries to use Switchdev events,
instead of the previous "sync_bridge" and "sync_port" which
only run when adding or removing VLANs on the bridge.
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Link: https://lore.kernel.org/r/20220314160918.4rfrrfgmbsf2pxl3@wse-c0155
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Ahern [Mon, 14 Mar 2022 20:45:51 +0000 (14:45 -0600)]
net: Add l3mdev index to flow struct and avoid oif reset for port devices
The fundamental premise of VRF and l3mdev core code is binding a socket
to a device (l3mdev or netdev with an L3 domain) to indicate L3 scope.
Legacy code resets flowi_oif to the l3mdev losing any original port
device binding. Ben (among others) has demonstrated use cases where the
original port device binding is important and needs to be retained.
This patch handles that by adding a new entry to the common flow struct
that can indicate the l3mdev index for later rule and table matching
avoiding the need to reset flowi_oif.
In addition to allowing more use cases that require port device binds,
this patch brings a few datapath simplications:
1. l3mdev_fib_rule_match is only called when walking fib rules and
always after l3mdev_update_flow. That allows an optimization to bail
early for non-VRF type uses cases when flowi_l3mdev is not set. Also,
only that index needs to be checked for the FIB table id.
2. l3mdev_update_flow can be called with flowi_oif set to a l3mdev
(e.g., VRF) device. By resetting flowi_oif only for this case the
FLOWI_FLAG_SKIP_NH_OIF flag is not longer needed and can be removed,
removing several checks in the datapath. The flowi_iif path can be
simplified to only be called if the it is not loopback (loopback can
not be assigned to an L3 domain) and the l3mdev index is not already
set.
3. Avoid another device lookup in the output path when the fib lookup
returns a reject failure.
Note: 2 functional tests for local traffic with reject fib rules are
updated to reflect the new direct failure at FIB lookup time for ping
rather than the failure on packet path. The current code fails like this:
HINT: Fails since address on vrf device is out of device scope
COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1
ping: Warning: source address might be selected on device other than: eth1
PING 172.16.3.1 (172.16.3.1) from 172.16.3.1 eth1: 56(84) bytes of data.
--- 172.16.3.1 ping statistics ---
1 packets transmitted, 0 received, 100% packet loss, time 0ms
where the test now directly fails:
HINT: Fails since address on vrf device is out of device scope
COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1
ping: connect: No route to host
Signed-off-by: David Ahern <dsahern@kernel.org>
Tested-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20220314204551.16369-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Przemyslaw Patynowski [Wed, 9 Mar 2022 15:37:39 +0000 (16:37 +0100)]
iavf: Fix double free in iavf_reset_task
Fix double free possibility in iavf_disable_vf, as crit_lock is
freed in caller, iavf_reset_task. Add kernel-doc for iavf_disable_vf.
Remove mutex_unlock in iavf_disable_vf.
Without this patch there is double free scenario, when calling
iavf_reset_task.
Fixes:
e85ff9c631e1 ("iavf: Fix deadlock in iavf_reset_task")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Sudheer Mogilappagari [Thu, 10 Mar 2022 18:46:52 +0000 (10:46 -0800)]
ice: destroy flow director filter mutex after releasing VSIs
Currently fdir_fltr_lock is accessed in ice_vsi_release_all() function
after it is destroyed. Instead destroy mutex after ice_vsi_release_all.
Fixes:
40319796b732 ("ice: Add flow director support for channel mode")
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Maciej Fijalkowski [Mon, 7 Mar 2022 17:47:39 +0000 (18:47 +0100)]
ice: fix NULL pointer dereference in ice_update_vsi_tx_ring_stats()
It is possible to do NULL pointer dereference in routine that updates
Tx ring stats. Currently only stats and bytes are updated when ring
pointer is valid, but later on ring is accessed to propagate gathered Tx
stats onto VSI stats.
Change the existing logic to move to next ring when ring is NULL.
Fixes:
e72bba21355d ("ice: split ice_ring onto Tx/Rx separate structs")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Wed, 23 Feb 2022 00:27:12 +0000 (16:27 -0800)]
ice: remove PF pointer from ice_check_vf_init
The ice_check_vf_init function takes both a PF and a VF pointer. Every
caller looks up the PF pointer from the VF structure. Some callers only
use of the PF pointer is call this function. Move the lookup inside
ice_check_vf_init and drop the unnecessary argument.
Cleanup the callers to drop the now unnecessary local variables. In
particular, replace the local PF pointer with a HW structure pointer in
ice_vc_get_vf_res_msg which simplifies a few accesses to the HW
structure in that function.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Wed, 23 Feb 2022 00:27:11 +0000 (16:27 -0800)]
ice: introduce ice_virtchnl.c and ice_virtchnl.h
Just as we moved the generic virtualization library logic into
ice_vf_lib.c, move the virtchnl message handling into ice_virtchnl.c
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Wed, 23 Feb 2022 00:27:10 +0000 (16:27 -0800)]
ice: cleanup long lines in ice_sriov.c
Before we move the virtchnl message handling from ice_sriov.c into
ice_virtchnl.c, cleanup some long line warnings to avoid checkpatch.pl
complaints.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Wed, 23 Feb 2022 00:27:09 +0000 (16:27 -0800)]
ice: introduce ICE_VF_RESET_LOCK flag
The ice_reset_vf function performs actions which must be taken only
while holding the VF configuration lock. Some flows already acquired the
lock, while other flows must acquire it just for the reset function. Add
the ICE_VF_RESET_LOCK flag to the function so that it can handle taking
and releasing the lock instead at the appropriate scope.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Wed, 23 Feb 2022 00:27:08 +0000 (16:27 -0800)]
ice: introduce ICE_VF_RESET_NOTIFY flag
In some cases of resetting a VF, the PF would like to first notify the
VF that a reset is impending. This is currently done via
ice_vc_notify_vf_reset. A wrapper to ice_reset_vf, ice_vf_reset_vf, is
used to call this function first before calling ice_reset_vf.
In fact, every single call to ice_vc_notify_vf_reset occurs just prior
to a call to ice_vc_reset_vf.
Now that ice_reset_vf has flags, replace this separate call with an
ICE_VF_RESET_NOTIFY flag. This removes an unnecessary exported function
of ice_vc_notify_vf_reset, and also makes there be a single function to
reset VFs (ice_reset_vf).
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Wed, 23 Feb 2022 00:27:07 +0000 (16:27 -0800)]
ice: convert ice_reset_vf to take flags
The ice_reset_vf function takes a boolean parameter which indicates
whether or not the reset is due to a VFLR event.
This is somewhat confusing to read because readers must interpret what
"true" and "false" mean when seeing a line of code like
"ice_reset_vf(vf, false)".
We will want to add another toggle to the ice_reset_vf in a following
change. To avoid proliferating many arguments, convert this function to
take flags instead. ICE_VF_RESET_VFLR will indicate if this is a VFLR
reset. A value of 0 indicates no flags.
One could argue that "ice_reset_vf(vf, 0)" is no more readable than
"ice_reset_vf(vf, false)".. However, this type of flags interface is
somewhat common and using 0 to mean "no flags" makes sense in this
context. We could bother to add a define for "ICE_VF_RESET_PLAIN" or
something similar, but this can be confusing since its not an actual bit
flag.
This paves the way to add another flag to the function in a following
change.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Wed, 23 Feb 2022 00:27:06 +0000 (16:27 -0800)]
ice: convert ice_reset_vf to standard error codes
The ice_reset_vf function returns a boolean value indicating whether or
not the VF reset. This is a bit confusing since it means that callers
need to know how to interpret the return value when needing to indicate
an error.
Refactor the function and call sites to report a regular error code. We
still report success (i.e. return 0) in cases where the reset is in
progress or is disabled.
Existing callers don't care because they do not check the return value.
We keep the error code anyways instead of a void return because we
expect future code which may care about or at least report the error
value.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Wed, 23 Feb 2022 00:27:05 +0000 (16:27 -0800)]
ice: make ice_reset_all_vfs void
The ice_reset_all_vfs function returns true if any VFs were reset, and
false otherwise. However, no callers check the return value.
Drop this return value and make the function void since the callers do
not care about this.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Wed, 23 Feb 2022 00:27:04 +0000 (16:27 -0800)]
ice: drop is_vflr parameter from ice_reset_all_vfs
The ice_reset_all_vfs function takes a parameter to handle whether its
operating after a VFLR event or not. This is not necessary as every
caller always passes true. Simplify the interface by removing the
parameter.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Wed, 23 Feb 2022 00:27:03 +0000 (16:27 -0800)]
ice: move reset functionality into ice_vf_lib.c
Now that the reset functions do not rely on Single Root specific
behavior, move the ice_reset_vf, ice_reset_all_vfs, and
ice_vf_rebuild_host_cfg functions and their dependent helper functions
out of ice_sriov.c and into ice_vf_lib.c
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Wed, 23 Feb 2022 00:27:02 +0000 (16:27 -0800)]
ice: fix a long line warning in ice_reset_vf
We're about to move ice_reset_vf out of ice_sriov.c and into
ice_vf_lib.c
One of the dev_err statements has a checkpatch.pl violation due to
putting the vf->vf_id on the same line as the dev_err. Fix this style
issue first before moving the code.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Wed, 23 Feb 2022 00:27:01 +0000 (16:27 -0800)]
ice: introduce VF operations structure for reset flows
The ice driver currently supports virtualization using Single Root IOV,
with code in the ice_sriov.c file. In the future, we plan to also
implement support for Scalable IOV, which uses slightly different
hardware implementations for some functionality.
To eventually allow this, we introduce a new ice_vf_ops structure which
will contain the basic operations that are different between the two IOV
implementations. This primarily includes logic for how to handle the VF
reset registers, as well as what to do before and after rebuilding the
VF's VSI.
Implement these ops structures and call the ops table instead of
directly calling the SR-IOV specific function. This will allow us to
easily add the Scalable IOV implementation in the future. Additionally,
it helps separate the generalized VF logic from SR-IOV specifics. This
change allows us to move the reset logic out of ice_sriov.c and into
ice_vf_lib.c without placing any Single Root specific details into the
generic file.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Wed, 23 Feb 2022 00:27:00 +0000 (16:27 -0800)]
ice: fix incorrect dev_dbg print mistaking 'i' for vf->vf_id
If we fail to clear the malicious VF indication after a VF reset, the
dev_dbg message which is printed uses the local variable 'i' when it
meant to use vf->vf_id. Fix this.
Fixes:
0891c89674e8 ("ice: warn about potentially malicious VFs")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Wed, 23 Feb 2022 00:26:59 +0000 (16:26 -0800)]
ice: introduce ice_vf_lib.c, ice_vf_lib.h, and ice_vf_lib_private.h
Introduce the ice_vf_lib.c file along with the ice_vf_lib.h and
ice_vf_lib_private.h header files.
These files will house the generic VF structures and access functions.
Move struct ice_vf and its dependent definitions into this new header
file.
The ice_vf_lib.c is compiled conditionally on CONFIG_PCI_IOV. Some of
its functionality is required by all driver files. However, some of its
functionality will only be required by other files also conditionally
compiled based on CONFIG_PCI_IOV.
Declaring these functions used only in CONFIG_PCI_IOV files in
ice_vf_lib.h is verbose. This is because we must provide a fallback
implementation for each function in this header since it is included in
files which may not be compiled with CONFIG_PCI_IOV.
Instead, introduce a new ice_vf_lib_private.h header which verifies that
CONFIG_PCI_IOV is enabled. This header is intended to be directly
included in .c files which are CONFIG_PCI_IOV only. Add a #error
indication that will complain if the file ever gets included by another
C file on a kernel with CONFIG_PCI_IOV disabled. Add a comment
indicating the nature of the file and why it is useful.
This makes it so that we can easily define functions exposed from
ice_vf_lib.c into other virtualization files without needing to add
fallback implementations for every single function.
This begins the path to separate out generic code which will be reused
by other virtualization implementations from ice_sriov.h and ice_sriov.c
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jakub Kicinski [Mon, 14 Mar 2022 22:28:19 +0000 (15:28 -0700)]
Add Paolo Abeni to networking maintainers
Growing the network maintainers team from 2 to 3.
Signed-off-by: David S. Miller <davem@davemloft.net>
Link: https://lore.kernel.org/r/20220314222819.958428-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 15 Mar 2022 19:11:02 +0000 (12:11 -0700)]
Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2022-03-14
Jacob Keller says:
The ice_virtchnl_pf.c file has become a single place for a lot of
virtualization functionality. This includes most of the virtchnl message
handling, integration with kernel hooks like the .ndo operations, reset
logic, and more.
We are planning in the future to implement and support Scalable IOV in the
ice driver. To do this, much (but not all) of the code in ice_virtchnl_pf.c
will want to be reused.
Rather than dump all of the Scalable IOV implementation into
ice_virtchnl_pf.c it makes sense to house it in a separate file. But that
still leaves all of the Single Root IOV code littered among more generic
logic.
The long term goal is to re-organize the code such that generic re-usable
code is split into separate files. The ice_sriov.c file would end up
containing all of the Single Root IOV implementation specific details, while
ice_vf_lib.[ch] and ice_virtchnl.[ch] contain the generic pieces.
As a first step, notice that ice_sriov.c currently does not contain much of
the SR-IOV implementation. This is housed primarily in ice_virtchnl_pf.c
The code in ice_sriov.c is really generic and relates to the VF mailbox,
including mailbox overflow detection.
Rename ice_sriov.c to ice_vf_mbx.c, and then rename ice_virtchnl_pf.c to
ice_sriov.c
A later series will finish the refactor by splitting ice_sriov.c into
multiple files, moving the generic code into ice_vf_lib.c and ice_virtchnl.c
To prepare for that series, perform some basic cleanup and other refactors
that we've accumulated during this development cycle.
This series builds on top of the recent hash table refactor work.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: use ice_is_vf_trusted helper function
ice: log an error message when eswitch fails to configure
ice: cleanup error logging for ice_ena_vfs
ice: move ice_set_vf_port_vlan near other .ndo ops
ice: refactor spoofchk control code in ice_sriov.c
ice: rename ICE_MAX_VF_COUNT to avoid confusion
ice: remove unused definitions from ice_sriov.h
ice: convert vf->vc_ops to a const pointer
ice: remove circular header dependencies on ice.h
ice: rename ice_virtchnl_pf.c to ice_sriov.c
ice: rename ice_sriov.c to ice_vf_mbx.c
====================
Link: https://lore.kernel.org/r/20220315011155.2166817-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 15 Mar 2022 18:52:25 +0000 (11:52 -0700)]
Merge git://git./linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
1) Revert CHECKSUM_UNNECESSARY for UDP packet from conntrack.
2) Reject unsupported families when creating tables, from Phil Sutter.
3) GRE support for the flowtable, from Toshiaki Makita.
4) Add GRE offload support for act_ct, also from Toshiaki.
5) Update mlx5 driver to support for GRE flowtable offload,
from Toshiaki Makita.
6) Oneliner to clean up incorrect indentation in nf_conntrack_bridge,
from Jiapeng Chong.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: bridge: clean up some inconsistent indenting
net/mlx5: Support GRE conntrack offload
act_ct: Support GRE offload
netfilter: flowtable: Support GRE
netfilter: nf_tables: Reject tables of unsupported family
Revert "netfilter: conntrack: mark UDP zero checksum as CHECKSUM_UNNECESSARY"
====================
Link: https://lore.kernel.org/r/20220315091513.66544-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 15 Mar 2022 13:12:15 +0000 (15:12 +0200)]
net: mscc: ocelot: fix build error due to missing IEEE_8021QAZ_MAX_TCS
IEEE_8021QAZ_MAX_TCS is defined in include/uapi/linux/dcbnl.h, which is
included by net/dcbnl.h. Then, linux/netdevice.h conditionally includes
net/dcbnl.h if CONFIG_DCB is enabled.
Therefore, when CONFIG_DCB is disabled, this indirect dependency is
broken.
There isn't a good reason to include net/dcbnl.h headers into the ocelot
switch library which exports low-level hardware API, so replace
IEEE_8021QAZ_MAX_TCS with OCELOT_NUM_TC which has the same value.
Fixes:
978777d0fb06 ("net: dsa: felix: configure default-prio and dscp priorities")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220315131215.273450-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bartosz Golaszewski [Tue, 15 Mar 2022 16:52:05 +0000 (17:52 +0100)]
Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"
This reverts commit
fc328a7d1fcce263db0b046917a66f3aa6e68719.
This commit - while attempting to fix a regression - has caused a number
of other problems. As the fallout from it is more significant than the
initial problem itself, revert it for now before we find a correct
solution.
Link: https://lore.kernel.org/all/20220314192522.GA3031157@roeck-us.net/
Link: https://lore.kernel.org/stable/20220314155509.552218-1-michael@walle.cc/
Link: https://lore.kernel.org/all/20211217153555.9413-1-marcelo.jimenez@gmail.com/
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reported-and-bisected-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Michael Walle <michael@walle.cc>
Cc: Thorsten Leemhuis <linux@leemhuis.info>
Cc: Marcelo Roberto Jimenez <marcelo.jimenez@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Carpenter [Mon, 14 Mar 2022 14:03:27 +0000 (17:03 +0300)]
net: sparx5: fix a couple warning messages
The WARN_ON() macro takes a condition, not a warning message.
Fixes:
0933bd04047c ("net: sparx5: Add support for ptp clocks")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220314140327.GB30883@kili
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Tue, 15 Mar 2022 13:43:51 +0000 (14:43 +0100)]
Merge branch 'netdevsim-support-for-l3-hw-stats'
Petr Machata says:
====================
netdevsim: Support for L3 HW stats
"L3 stats" is a suite of interface statistics aimed at reflecting traffic
taking place in a HW device, on an object corresponding to some software
netdevice. Support for this stats suite has been added recently, in commit
ca0a53dcec94 ("Merge branch 'net-hw-counters-for-soft-devices'").
In this patch set:
- Patch #1 adds support for L3 stats to netdevsim.
Real devices can have various conditions for when an L3 counter is
available. To simulate this, netdevsim maintains a list of devices
suitable for HW stats collection. Only when l3_stats is enabled on both a
netdevice itself, and in netdevsim, will netdevsim contribute values to
L3 stats.
This enablement and disablement is done via debugfs:
# echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/enable_ifindex
# echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/disable_ifindex
Besides this, there is a third toggle to mark a device for future failure:
# echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/fail_next_enable
- This allows HW-independent testing of stats reporting and in-kernel APIs,
as well as a test for enablement rollback, which is difficult to do
otherwise. This netdevsim-specific selftest is added in patch #2.
- Patch #3 adds another driver-specific selftest, namely a test aimed at
checking mlxsw-induced stats monitoring events.
====================
Link: https://lore.kernel.org/r/cover.1647265833.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Petr Machata [Mon, 14 Mar 2022 14:01:17 +0000 (15:01 +0100)]
selftests: mlxsw: hw_stats_l3: Add a new test
Add a test that verifies that UAPI notifications are emitted, as mlxsw
installs and deinstalls HW counters for the L3 offload xstats.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Petr Machata [Mon, 14 Mar 2022 14:01:16 +0000 (15:01 +0100)]
selftests: netdevsim: hw_stats_l3: Add a new test
Add a test that verifies basic UAPI contracts, netdevsim operation,
rollbacks after partial enablement in core, and UAPI notifications.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Petr Machata [Mon, 14 Mar 2022 14:01:15 +0000 (15:01 +0100)]
netdevsim: Introduce support for L3 offload xstats
Add support for testing of HW stats support that was added recently, namely
the L3 stats support. L3 stats are provided for devices for which the L3
stats have been turned on, and that were enabled for netdevsim through a
debugfs toggle:
# echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/enable_ifindex
For fully enabled netdevices, netdevsim counts 10pps of ingress traffic and
20pps of egress traffic. Similarly, L3 stats can be disabled for a given
device, and netdevsim ceases pretending there is any HW traffic going on:
# echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/disable_ifindex
Besides this, there is a third toggle to mark a device for future failure:
# echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/fail_next_enable
A future request to enable L3 stats on such netdevice will be bounced by
netdevsim:
# ip -j l sh dev d | jq '.[].ifindex'
66
# echo 66 > /sys/kernel/debug/netdevsim/netdevsim10/hwstats/l3/enable_ifindex
# echo 66 > /sys/kernel/debug/netdevsim/netdevsim10/hwstats/l3/fail_next_enable
# ip stats set dev d l3_stats on
Error: netdevsim: Stats enablement set to fail.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Anders Roxell [Mon, 14 Mar 2022 11:02:54 +0000 (12:02 +0100)]
net: phy: Kconfig: micrel_phy: fix dependency issue
When building driver CONFIG_MICREL_PHY the follow error shows up:
aarch64-linux-gnu-ld: drivers/net/phy/micrel.o: in function `lan8814_ts_info':
micrel.c:(.text+0x1764): undefined reference to `ptp_clock_index'
micrel.c:(.text+0x1764): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_index'
aarch64-linux-gnu-ld: drivers/net/phy/micrel.o: in function `lan8814_probe':
micrel.c:(.text+0x4720): undefined reference to `ptp_clock_register'
micrel.c:(.text+0x4720): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_register'
Rework Kconfig for MICREL_PHY to depend on 'PTP_1588_CLOCK_OPTIONAL'.
Arnd describes in a good way why its needed to add this depends in patch
e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies").
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
ece19502834d ("net: phy: micrel: 1588 support for LAN8814 phy")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220314110254.12498-1-anders.roxell@linaro.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jiasheng Jiang [Mon, 14 Mar 2022 01:34:48 +0000 (09:34 +0800)]
atm: eni: Add check for dma_map_single
As the potential failure of the dma_map_single(),
it should be better to check it and return error
if fails.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Sat, 12 Mar 2022 20:50:14 +0000 (21:50 +0100)]
net: sfp: add 2500base-X quirk for Lantech SFP module
The Lantech 8330-262D-E module is 2500base-X capable, but it reports the
nominal bitrate as 2500MBd instead of 3125MBd. Add a quirk for the
module.
The following in an EEPROM dump of such a SFP with the serial number
redacted:
00: 03 04 07 00 00 00 01 20 40 0c 05 01 19 00 00 00 ???...? @????...
10: 1e 0f 00 00 4c 61 6e 74 65 63 68 20 20 20 20 20 ??..Lantech
20: 20 20 20 20 00 00 00 00 38 33 33 30 2d 32 36 32 ....8330-262
30: 44 2d 45 20 20 20 20 20 56 31 2e 30 03 52 00 cb D-E V1.0?R.?
40: 00 1a 00 00 46 43 XX XX XX XX XX XX XX XX XX XX .?..FCXXXXXXXXXX
50: 20 20 20 20 32 32 30 32 31 34 20 20 68 b0 01 98 220214 h???
60: 45 58 54 52 45 4d 45 4c 59 20 43 4f 4d 50 41 54 EXTREMELY COMPAT
70: 49 42 4c 45 20 20 20 20 20 20 20 20 20 20 20 20 IBLE
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220312205014.4154907-1-michael@walle.cc
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Eric Dumazet [Sat, 12 Mar 2022 23:29:58 +0000 (15:29 -0800)]
net/packet: fix slab-out-of-bounds access in packet_recvmsg()
syzbot found that when an AF_PACKET socket is using PACKET_COPY_THRESH
and mmap operations, tpacket_rcv() is queueing skbs with
garbage in skb->cb[], triggering a too big copy [1]
Presumably, users of af_packet using mmap() already gets correct
metadata from the mapped buffer, we can simply make sure
to clear 12 bytes that might be copied to user space later.
BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:225 [inline]
BUG: KASAN: stack-out-of-bounds in packet_recvmsg+0x56c/0x1150 net/packet/af_packet.c:3489
Write of size 165 at addr
ffffc9000385fb78 by task syz-executor233/3631
CPU: 0 PID: 3631 Comm: syz-executor233 Not tainted
5.17.0-rc7-syzkaller-02396-g0b3660695e80 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0xf/0x336 mm/kasan/report.c:255
__kasan_report mm/kasan/report.c:442 [inline]
kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0x13d/0x180 mm/kasan/generic.c:189
memcpy+0x39/0x60 mm/kasan/shadow.c:66
memcpy include/linux/fortify-string.h:225 [inline]
packet_recvmsg+0x56c/0x1150 net/packet/af_packet.c:3489
sock_recvmsg_nosec net/socket.c:948 [inline]
sock_recvmsg net/socket.c:966 [inline]
sock_recvmsg net/socket.c:962 [inline]
____sys_recvmsg+0x2c4/0x600 net/socket.c:2632
___sys_recvmsg+0x127/0x200 net/socket.c:2674
__sys_recvmsg+0xe2/0x1a0 net/socket.c:2704
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fdfd5954c29
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007ffcf8e71e48 EFLAGS:
00000246 ORIG_RAX:
000000000000002f
RAX:
ffffffffffffffda RBX:
0000000000000003 RCX:
00007fdfd5954c29
RDX:
0000000000000000 RSI:
0000000020000500 RDI:
0000000000000005
RBP:
0000000000000000 R08:
000000000000000d R09:
000000000000000d
R10:
0000000000000000 R11:
0000000000000246 R12:
00007ffcf8e71e60
R13:
00000000000f4240 R14:
000000000000c1ff R15:
00007ffcf8e71e54
</TASK>
addr
ffffc9000385fb78 is located in stack of task syz-executor233/3631 at offset 32 in frame:
____sys_recvmsg+0x0/0x600 include/linux/uio.h:246
this frame has 1 object:
[32, 160) 'addr'
Memory state around the buggy address:
ffffc9000385fa80: 00 04 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00
ffffc9000385fb00: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00
>
ffffc9000385fb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f3
^
ffffc9000385fc00: f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 f1
ffffc9000385fc80: f1 f1 f1 00 f2 f2 f2 00 f2 f2 f2 00 00 00 00 00
==================================================================
Fixes:
0fb375fb9b93 ("[AF_PACKET]: Allow for > 8 byte hardware addresses.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220312232958.3535620-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Walle [Sat, 12 Mar 2022 22:41:40 +0000 (23:41 +0100)]
net: mdio: mscc-miim: fix duplicate debugfs entry
This driver can have up to two regmaps. If the second one is registered
its debugfs entry will have the same name as the first one and the
following error will be printed:
[ 3.833521] debugfs: Directory '
e200413c.mdio' with parent 'regmap' already present!
Give the second regmap a name to avoid this.
Fixes:
a27a76282837 ("net: mdio: mscc-miim: convert to a regmap implementation")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220312224140.4173930-1-michael@walle.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jacob Keller [Wed, 23 Feb 2022 00:26:58 +0000 (16:26 -0800)]
ice: use ice_is_vf_trusted helper function
The ice_vc_cfg_promiscuous_mode_msg function directly checks
ICE_VIRTCHNL_VF_CAP_PRIVILEGE, instead of using the existing helper
function ice_is_vf_trusted. Switch this to use the helper function so
that all trusted checks are consistent. This aids in any potential
future refactor by ensuring consistent code.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Wed, 23 Feb 2022 00:26:57 +0000 (16:26 -0800)]
ice: log an error message when eswitch fails to configure
When ice_eswitch_configure fails, print an error message to make it more
obvious why VF initialization did not succeed.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
OSDN Git Service
