OSDN Git Service
Helge Deller [Sat, 14 Oct 2023 05:25:02 +0000 (07:25 +0200)]
hw/hppa: Provide RTC and DebugOutputPort on CPU #0
For SeaBIOS-hppa, the RTC and DebugOutputPort were in the I/O area of
the LASI chip of the emulated B160L machine.
Since we will add other machines without a LASI chip, move the emulated
devices into the I/O area of CPU#0 instead.
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Sat, 14 Oct 2023 05:15:10 +0000 (07:15 +0200)]
hw/hppa: Export machine name, BTLBs, power-button address via fw_cfg
Provide necessary info to SeaBIOS-hppa.
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Sat, 14 Oct 2023 17:48:27 +0000 (19:48 +0200)]
MAINTAINERS: Update HP-PARISC entries
Add the new HP C3700 machine, the new Astro PCI host and
add the missing entry for the seabios-hppa directory.
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Sat, 14 Oct 2023 04:55:16 +0000 (06:55 +0200)]
pci-host: Wire up new Astro/Elroy PCI bridge
Allow the Astro source to be built.
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Sat, 14 Oct 2023 04:45:59 +0000 (06:45 +0200)]
hw/pci-host: Add Astro system bus adapter found on PA-RISC machines
The 64-bit PA-RISC machines use a Astro system bus adapter (SBA)
with Elroy PCI host chips.
Later generation Astro chips were named Pluto, Ike and REO.
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Sat, 14 Oct 2023 04:50:55 +0000 (06:50 +0200)]
lasips2: LASI PS/2 devices are not user-createable
Those PS/2 ports are created with the LASI controller when
a 32-bit PA-RISC machine is created.
Mark them not user-createable to avoid showing them in
the qemu device list.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: qemu-stable@nongnu.org
Helge Deller [Sat, 14 Oct 2023 04:42:37 +0000 (06:42 +0200)]
pci_ids/tulip: Add PCI vendor ID for HP and use it in tulip
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Sat, 14 Oct 2023 05:06:04 +0000 (07:06 +0200)]
hw/hppa: Require at least SeaBIOS-hppa version 10
The new SeaBIOS-hppa version 10 includes initial support
for PA2.0 CPUs.
Additionally update copyright and drop commented-out code.
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Sat, 14 Oct 2023 16:59:38 +0000 (18:59 +0200)]
target/hppa: Update to SeaBIOS-hppa version 10
Enhancements:
- Initial support for 64-bit CPUs with Astro/Elroy (e.g. C3700
workstation)
- USB support (OHCI)
- better PCI support
- esp-scsi fixes from Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Helge Deller <deller@gmx.de>
Stefan Hajnoczi [Thu, 12 Oct 2023 14:24:44 +0000 (10:24 -0400)]
Merge tag 'pull-riscv-to-apply-
20231012-1' of https://github.com/alistair23/qemu into staging
Second RISC-V PR for 8.2
* Add support for the max CPU
* Detect user choice in TCG
* Clear CSR values at reset and sync MPSTATE with host
* Fix the typo of inverted order of pmpaddr13 and pmpaddr14
* Split TCG/KVM accelerators from cpu.c
* Add extension properties for all cpus
* Replace GDB exit calls with proper shutdown
* Support KVM_GET_REG_LIST
* Remove RVG warning
* Use env_archcpu for better performance
* Deprecate capital 'Z' CPU properties
* Fix vfwmaccbf16.vf
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmUncYAACgkQr3yVEwxT
# gBPQ3g/9Fi4uYRK7dymHHAQbOO9NPlmVPPSxmQ8fNUhoZUkbHfm56JEl42Xr02rA
# Lg2ORRQxJhAinANV8CotnbyLRHNCAvouCMCQEjHo1YEHzdXc0tQzp+rIOHT7v9rH
# 6OQpI6RuCjO+0LQPMgzJx8yokMw/9b0uma3+RkNKod1XsSySo6JvDkMZGGZZWuVX
# Que3TMHzc4513PWEwRS9NaAHqRdy/ax0aPu9khswTYBxeJ/mBTLvGj4wBq5wnS7+
# JPvq0M5ScUMl4K5o884wsAzOdxRk8QZOMx3duMCbqXw0xFmYZj/EzcIeHdnXwuDB
# lcANd6LcESMNUb8iDBaFRjLnZ/gNiu20/P/LPWyTirfoZXzZ+h6WPnSeli36xtzO
# KKWtvS1YggCjsDvh9/PLYAvUGBcS/kUhIynN10YKnoKB+wSDxxyvBS1GU6c8czgc
# WDf3V4P3Z8oPKDA/24Qd9Uiho1Gq9FED4eBQPb9PuvkfboKE/g7lUp708XXDFVld
# hkJMsYROSRvk54RHITrD9Z+XFQ2TfC8wHLH0IwlyynQnc1sKvXaR6U1hZTAVtE4f
# yley/xCQ7OUV+hrx1sQLURcN6A+SPummOY5jdHiD29QcJnOZnkSy5j2KOlnHSa5i
# 6v/6EFCgxwr69N6Q6X34VDv6+DZqLO2dNncQCInYFfupRhQ7t1E=
# =SUon
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 12 Oct 2023 00:09:36 EDT
# gpg: using RSA key
6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-
20231012-1' of https://github.com/alistair23/qemu: (54 commits)
target/riscv: Fix vfwmaccbf16.vf
target/riscv: deprecate capital 'Z' CPU properties
target/riscv: Use env_archcpu for better performance
target/riscv/tcg: remove RVG warning
target/riscv/kvm: support KVM_GET_REG_LIST
target/riscv/kvm: improve 'init_multiext_cfg' error msg
gdbstub: replace exit calls with proper shutdown for softmmu
hw/char: riscv_htif: replace exit calls with proper shutdown
hw/misc/sifive_test.c: replace exit calls with proper shutdown
softmmu: pass the main loop status to gdb "Wxx" packet
softmmu: add means to pass an exit code when requesting a shutdown
target/riscv/tcg-cpu.c: add extension properties for all cpus
target/riscv: add riscv_cpu_get_name()
target/riscv/cpu: move priv spec functions to tcg-cpu.c
target/riscv/cpu.c: export isa_edata_arr[]
target/riscv/tcg: move riscv_cpu_add_misa_properties() to tcg-cpu.c
target/riscv/cpu.c: make misa_ext_cfgs[] 'const'
target/riscv/tcg: introduce tcg_cpu_instance_init()
target/riscv/cpu.c: export set_misa()
target/riscv/kvm: do not use riscv_cpu_add_misa_properties()
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Thu, 12 Oct 2023 14:24:06 +0000 (10:24 -0400)]
Merge tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu into staging
trivial patches for 2023-10-12
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEe3O61ovnosKJMUsicBtPaxppPlkFAmUnFa8PHG1qdEB0bHMu
# bXNrLnJ1AAoJEHAbT2saaT5ZBv8H/0MtWL6FqTzvz5yLn2WSbj2ng1RG1Deh36Sy
# 1PCpFKy85ZSBKLOzgvbpn4VfpEdsvD/+sX4C4CVde+vR3oCjdUM14hnzEWX86gFl
# O8Ct8++MLPqnwgu6Rg6Z+Ie2yBtsQ5VABH/1q36T7+XHHh19bgEw6tW34/f2Ncxw
# 8UQO2lm9tAMAOEfXoutoj8K8ch3FvbsEic9L0ORc7ntWc7NIauc3zizogtPHAzR8
# elB3BiLn4sMHLBj+IunndOiLadUAVOKTJ5PKi4b8iRa6aE8E6bjtLxdiPr4XEx/g
# 7rSGvNM+Lm7mEgJSyyik+u0MshKjfRi+SrbvId9FIqACG1GCKeI=
# =rFns
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 11 Oct 2023 17:37:51 EDT
# gpg: using RSA key
7B73BAD68BE7A2C289314B22701B4F6B1A693E59
# gpg: issuer "mjt@tls.msk.ru"
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" [full]
# gpg: aka "Michael Tokarev <mjt@corpit.ru>" [full]
# gpg: aka "Michael Tokarev <mjt@debian.org>" [full]
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59
* tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu:
cpus: Remove unused smp_cores/smp_threads declarations
scripts/xml-preprocess: Make sure this script is invoked via the right Python
roms: use PYTHON to invoke python
MAINTAINERS: Add some unowned files to the SBSA-REF section
MAINTAINERS: Add section for overall sensors
MAINTAINERS: add standard-headers to Hosts/LINUX
MAINTAINERS: Add the CI-related doc files to the CI section
MAINTAINERS: Add include folder to the hw/char/ section
MAINTAINERS: Add unowned RISC-V related files to the right sections
MAINTAINERS: Add g364fb and ds1225y to the Jazz section
Fix compilation when UFFDIO_REGISTER is not set.
Update AMD memory encryption document links.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Thu, 12 Oct 2023 14:23:20 +0000 (10:23 -0400)]
Merge tag 'qga-pull-2023-10-11' of https://github.com/kostyanf14/qemu into staging
qga-pull-2023-10-11
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEwsLBCepDxjwUI+uE711egWG6hOcFAmUmqx4ACgkQ711egWG6
# hOcgsBAAkmFQgGfxNGIXB+Y8QIWVHPlzhng6F3bzHXs+7t7RC7ITPcebsvmRZWKr
# Kn1etUhF22UneI+ipBh0JK3BkTZF5qnc4089F5Gh9uHfUS8aT7M+gDAcJoJDZpv3
# xr11iSlW9hooclAg6qV4RZ0bvjXbwgRHhI6I0P/1aNx7lKalWzZpvdnBOliG56rG
# oWf9vrWIC1nkoRg4vtKLqjouKzYsPR/kdXonr5bg8s+zV6Oqk6bC2FiN6TU/1QRI
# 7FvC1mTESqWACtSqSzooGQVEhBVGZZOzzIufPCDxj9evgKZE+0Yd761IjcfXt3JS
# T4+C5Q2fZPL6hTPXnQF3YsRRJwn5tK8r1747dc2HsmLtX7EPXhu7H4gcPJLim/cc
# Kuln9+BVF+oqnLmkAgSP7Ss13lZPBFpEGhiREAYZrbD+lPfwv1ufTb1EkLWTWIpD
# MCTGW4ZBQsA+H/XMVCIf2dRYfCHgVslElmBq0hJTUvklQtrpVuGuHJzNis8W/qTq
# 4AxMkh+3sS0lGDioq8fsIinlprP9XnF7hPvuJmLGQuV/wUHRmQ0L8twZiPB1g6nm
# 8mwa/r+5lc04RXQ/cCLEtj6H+3XKHn8+QrsuknOnNEQ80lZtPQqM9/iz3ThSXd5Z
# zFcd4mOo5VwiGcS6KgmXpL9ZbYL6U8HHwAGuu1akky90rRxSK1A=
# =mHqt
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 11 Oct 2023 10:03:10 EDT
# gpg: using RSA key
C2C2C109EA43C63C1423EB84EF5D5E8161BA84E7
# gpg: Good signature from "Kostiantyn Kostiuk (Upstream PR sign) <kkostiuk@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: C2C2 C109 EA43 C63C 1423 EB84 EF5D 5E81 61BA 84E7
* tag 'qga-pull-2023-10-11' of https://github.com/kostyanf14/qemu:
qapi: qga: Clarify when out-data and err-data are populated
qga: Fix memory leak when output stream is unused
qga: Remove platform GUID definitions
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Max Chou [Thu, 5 Oct 2023 09:57:32 +0000 (17:57 +0800)]
target/riscv: Fix vfwmaccbf16.vf
The operator (fwmacc16) of vfwmaccbf16.vf helper function should be
replaced by fwmaccbf16.
Fixes:
adf772b0f7 ("target/riscv: Add support for Zvfbfwma extension")
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <
20231005095734.567575-1-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 9 Oct 2023 11:28:17 +0000 (08:28 -0300)]
target/riscv: deprecate capital 'Z' CPU properties
At this moment there are eleven CPU extension properties that starts
with capital 'Z': Zifencei, Zicsr, Zihintntl, Zihintpause, Zawrs, Zfa,
Zfh, Zfhmin, Zve32f, Zve64f and Zve64d. All other extensions are named
with lower-case letters.
We want all properties to be named with lower-case letters since it's
consistent with the riscv-isa string that we create in the FDT. Having
these 11 properties to be exceptions can be confusing.
Deprecate all of them. Create their lower-case counterpart to be used as
maintained CPU properties. When trying to use any deprecated property a
warning message will be displayed, recommending users to switch to the
lower-case variant:
./build/qemu-system-riscv64 -M virt -cpu rv64,Zifencei=true --nographic
qemu-system-riscv64: warning: CPU property 'Zifencei' is deprecated. Please use 'zifencei' instead
This will give users some time to change their scripts before we remove
the capital 'Z' properties entirely.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <
20231009112817.8896-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Richard W.M. Jones [Mon, 9 Oct 2023 12:48:25 +0000 (13:48 +0100)]
target/riscv: Use env_archcpu for better performance
RISCV_CPU(cs) uses a checked cast. When QOM cast debugging is enabled
this adds about 5% total overhead when emulating RV64 on x86-64 host.
Using a RISC-V guest with 16 vCPUs, 16 GB of guest RAM, virtio-blk
disk. The guest has a copy of the qemu source tree. The test
involves compiling the qemu source tree with 'make clean; time make -j16'.
Before making this change the compile step took 449 & 447 seconds over
two consecutive runs.
After making this change: 428 & 421 seconds.
The saving is over 5%.
Thanks: Paolo Bonzini
Thanks: Philippe Mathieu-Daudé
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <
20231009124859.
3373696-2-rjones@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 3 Oct 2023 12:25:39 +0000 (09:25 -0300)]
target/riscv/tcg: remove RVG warning
Vendor CPUs that set RVG are displaying user warnings about other
extensions that RVG must enable, one warning per CPU. E.g.:
$ ./build/qemu-system-riscv64 -smp 8 -M virt -cpu veyron-v1 -nographic
qemu-system-riscv64: warning: Setting G will also set IMAFD_Zicsr_Zifencei
qemu-system-riscv64: warning: Setting G will also set IMAFD_Zicsr_Zifencei
qemu-system-riscv64: warning: Setting G will also set IMAFD_Zicsr_Zifencei
qemu-system-riscv64: warning: Setting G will also set IMAFD_Zicsr_Zifencei
qemu-system-riscv64: warning: Setting G will also set IMAFD_Zicsr_Zifencei
qemu-system-riscv64: warning: Setting G will also set IMAFD_Zicsr_Zifencei
qemu-system-riscv64: warning: Setting G will also set IMAFD_Zicsr_Zifencei
qemu-system-riscv64: warning: Setting G will also set IMAFD_Zicsr_Zifencei
This happens because we decided a while ago that, for simplicity, vendor
CPUs could set RVG instead of setting each G extension individually in
their cpu_init(). Our warning isn't taking that into account, and we're
bugging users with a warning that we're causing ourselves.
In a closer look we conclude that this warning is not warranted in any
other circumstance since we're just following the ISA [1], which states
in chapter 24:
"One goal of the RISC-V project is that it be used as a stable software
development target. For this purpose, we define a combination of a base
ISA (RV32I or RV64I) plus selected standard extensions (IMAFD, Zicsr,
Zifencei) as a 'general-purpose' ISA, and we use the abbreviation G for
the IMAFDZicsr Zifencei combination of instruction-set extensions."
With this in mind, enabling IMAFD_Zicsr_Zifencei if the user explicitly
enables 'G' is an expected behavior and the warning is unneeded. Any
user caught by surprise should refer to the ISA.
Remove the warning when handling RVG.
[1] https://github.com/riscv/riscv-isa-manual/releases/download/Ratified-IMAFDQC/riscv-spec-
20191213.pdf
Reported-by: Paul A. Clarke <pclarke@ventanamicro.com>
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <
20231003122539.775932-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 3 Oct 2023 13:21:48 +0000 (10:21 -0300)]
target/riscv/kvm: support KVM_GET_REG_LIST
KVM for RISC-V started supporting KVM_GET_REG_LIST in Linux 6.6. It
consists of a KVM ioctl() that retrieves a list of all available regs
for get_one_reg/set_one_reg. Regs that aren't present in the list aren't
supported in the host.
This simplifies our lives when initing the KVM regs since we don't have
to always attempt a KVM_GET_ONE_REG for all regs QEMU knows. We'll only
attempt a get_one_reg() if we're sure the reg is supported, i.e. it was
retrieved by KVM_GET_REG_LIST. Any error in get_one_reg() will then
always considered fatal, instead of having to handle special error codes
that might indicate a non-fatal failure.
Start by moving the current kvm_riscv_init_multiext_cfg() logic into a
new kvm_riscv_read_multiext_legacy() helper. We'll prioritize using
KVM_GET_REG_LIST, so check if we have it available and, in case we
don't, use the legacy() logic.
Otherwise, retrieve the available reg list and use it to check if the
host supports our known KVM regs, doing the usual get_one_reg() for
the supported regs and setting cpu->cfg accordingly.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <
20231003132148.797921-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 3 Oct 2023 13:21:47 +0000 (10:21 -0300)]
target/riscv/kvm: improve 'init_multiext_cfg' error msg
Our error message is returning the value of 'ret', which will be always
-1 in case of error, and will not be that useful:
qemu-system-riscv64: Unable to read ISA_EXT KVM register ssaia, error -1
Improve the error message by outputting 'errno' instead of 'ret'. Use
strerrorname_np() to output the error name instead of the error code.
This will give us what we need to know right away:
qemu-system-riscv64: Unable to read ISA_EXT KVM register ssaia, error code: ENOENT
Given that we're going to exit(1) in this condition instead of
attempting to recover, remove the 'kvm_riscv_destroy_scratch_vcpu()'
call.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <
20231003132148.797921-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Clément Chigot [Tue, 3 Oct 2023 07:14:27 +0000 (09:14 +0200)]
gdbstub: replace exit calls with proper shutdown for softmmu
This replaces the exit calls by shutdown requests, ensuring a proper
cleanup of Qemu. Features like net/vhost-vdpa.c are expecting
qemu_cleanup to be called to remove their last residuals.
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20231003071427.188697-6-chigot@adacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Clément Chigot [Tue, 3 Oct 2023 07:14:26 +0000 (09:14 +0200)]
hw/char: riscv_htif: replace exit calls with proper shutdown
This replaces the exit calls by shutdown requests, ensuring a proper
cleanup of Qemu. Otherwise, some connections like gdb could be broken
before its final packet ("Wxx") is being sent. This part, being done
inside qemu_cleanup function, can be reached only when the main loop
exits after a shutdown request.
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20231003071427.188697-5-chigot@adacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Clément Chigot [Tue, 3 Oct 2023 07:14:25 +0000 (09:14 +0200)]
hw/misc/sifive_test.c: replace exit calls with proper shutdown
This replaces the exit calls by shutdown requests, ensuring a proper
cleanup of Qemu. Otherwise, some connections like gdb could be broken
before its final packet ("Wxx") is being sent. This part, being done
inside qemu_cleanup function, can be reached only when the main loop
exits after a shutdown request.
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20231003071427.188697-4-chigot@adacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Clément Chigot [Tue, 3 Oct 2023 07:14:24 +0000 (09:14 +0200)]
softmmu: pass the main loop status to gdb "Wxx" packet
gdb_exit function aims to close gdb sessions and sends the exit code of
the current execution. It's being called by qemu_cleanup once the main
loop is over.
Until now, the exit code sent was always 0. Now that hardware can
shutdown this main loop with custom exit codes, these codes must be
transfered to gdb as well.
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20231003071427.188697-3-chigot@adacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Clément Chigot [Tue, 3 Oct 2023 07:14:23 +0000 (09:14 +0200)]
softmmu: add means to pass an exit code when requesting a shutdown
As of now, the exit code was either EXIT_FAILURE when a panic shutdown
was requested or EXIT_SUCCESS otherwise.
However, some hardware could want to pass more complex exit codes. Thus,
introduce a new shutdown request function allowing that.
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20231003071427.188697-2-chigot@adacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 26 Sep 2023 18:31:09 +0000 (15:31 -0300)]
target/riscv/tcg-cpu.c: add extension properties for all cpus
At this moment we do not expose extension properties for vendor CPUs
because that would allow users to change them via command line. The
drawback is that if we were to add an API that shows all CPU properties,
e.g. qmp-query-cpu-model-expansion, we won't be able to show extensions
state of vendor CPUs.
We have the required machinery to create extension properties for vendor
CPUs while not allowing users to enable extensions. Disabling existing
extensions is allowed since it can be useful for debugging.
Change the set() callback cpu_set_multi_ext_cfg() to allow enabling
extensions only for generic CPUs. In cpu_add_multi_ext_prop() let's not
set the default values for the properties if we're not dealing with
generic CPUs, otherwise the values set in cpu_init() of vendor CPUs will
be overwritten. And finally, in tcg_cpu_instance_init(), add cpu user
properties for all CPUs.
For the veyron-v1 CPU, we're now able to disable existing extensions
like smstateen:
$ ./build/qemu-system-riscv64 --nographic -M virt \
-cpu veyron-v1,smstateen=false
But setting extensions that the CPU didn't set during cpu_init(), like
V, is not allowed:
$ ./build/qemu-system-riscv64 --nographic -M virt \
-cpu veyron-v1,v=true
qemu-system-riscv64: can't apply global veyron-v1-riscv-cpu.v=true:
'veyron-v1' CPU does not allow enabling extensions
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20230926183109.165878-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 26 Sep 2023 18:31:08 +0000 (15:31 -0300)]
target/riscv: add riscv_cpu_get_name()
We'll introduce generic errors that will output a CPU type name via its
RISCVCPU pointer. Create a helper for that.
Use the helper in tcg_cpu_realizefn() instead of hardcoding the 'host'
CPU name.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20230926183109.165878-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 25 Sep 2023 17:57:09 +0000 (14:57 -0300)]
target/riscv/cpu: move priv spec functions to tcg-cpu.c
Priv spec validation is TCG specific. Move it to the TCG accel class.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <
20230925175709.35696-20-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 25 Sep 2023 17:57:08 +0000 (14:57 -0300)]
target/riscv/cpu.c: export isa_edata_arr[]
This array will be read by the TCG accel class, allowing it to handle
priv spec verifications on its own. The array will remain here in cpu.c
because it's also used by the riscv,isa string function.
To export it we'll finish it with an empty element since ARRAY_SIZE()
won't work outside of cpu.c. Get rid of its ARRAY_SIZE() usage now to
alleviate the changes for the next patch.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20230925175709.35696-19-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 25 Sep 2023 17:57:07 +0000 (14:57 -0300)]
target/riscv/tcg: move riscv_cpu_add_misa_properties() to tcg-cpu.c
All code related to MISA TCG properties is also moved.
At this point, all TCG properties handling is done in tcg-cpu.c, all KVM
properties handling is done in kvm-cpu.c.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20230925175709.35696-18-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 25 Sep 2023 17:57:06 +0000 (14:57 -0300)]
target/riscv/cpu.c: make misa_ext_cfgs[] 'const'
The array isn't marked as 'const' because we're initializing their
elements in riscv_cpu_add_misa_properties(), 'name' and 'description'
fields.
In a closer look we can see that we're not using these 2 fields after
creating the MISA properties. And we can create the properties by using
riscv_get_misa_ext_name() and riscv_get_misa_ext_description()
directly.
Remove the 'name' and 'description' fields from RISCVCPUMisaExtConfig
and make misa_ext_cfgs[] a const array.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20230925175709.35696-17-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 25 Sep 2023 17:57:05 +0000 (14:57 -0300)]
target/riscv/tcg: introduce tcg_cpu_instance_init()
tcg_cpu_instance_init() will be the 'cpu_instance_init' impl for the TCG
accelerator. It'll be called from within riscv_cpu_post_init(), via
accel_cpu_instance_init(), similar to what happens with KVM. In fact, to
preserve behavior, the implementation will be similar to what
riscv_cpu_post_init() already does.
In this patch we'll move riscv_cpu_add_user_properties() and
riscv_init_max_cpu_extensions() and all their dependencies to tcg-cpu.c.
All multi-extension properties code was moved. The 'multi_ext_user_opts'
hash table was also moved to tcg-cpu.c since it's a TCG only structure,
meaning that we won't have to worry about initializing a TCG hash table
when running a KVM CPU anymore.
riscv_cpu_add_user_properties() will remain in cpu.c for now due to how
much code it requires to be moved at the same time. We'll do that in the
next patch.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20230925175709.35696-16-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 25 Sep 2023 17:57:04 +0000 (14:57 -0300)]
target/riscv/cpu.c: export set_misa()
We'll move riscv_init_max_cpu_extensions() to tcg-cpu.c in the next
patch and set_misa() needs to be usable from there.
Rename it to riscv_cpu_set_misa() and make it public.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20230925175709.35696-15-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 25 Sep 2023 17:57:03 +0000 (14:57 -0300)]
target/riscv/kvm: do not use riscv_cpu_add_misa_properties()
riscv_cpu_add_misa_properties() is being used to fill the missing KVM
MISA properties but it is a TCG helper that was adapted to do so. We'll
move it to tcg-cpu.c in the next patches, meaning that KVM needs to fill
the remaining MISA properties on its own.
Do not use riscv_cpu_add_misa_properties(). Let's create a new array
with all available MISA bits we support that can be read by KVM. The
array is zero terminate to allow us to iterate through it without
knowing its size.
Then, inside kvm_riscv_add_cpu_user_properties(), we'll create all KVM
MISA properties as usual and then use this array to add any missing MISA
properties with the riscv_cpu_add_kvm_unavail_prop() helper.
Note that we're creating misa_bits[], and not using the existing
'riscv_single_letter_exts[]', because the latter is tuned for riscv,isa
related functions and it doesn't have all MISA bits we support. Commit
0e2c377023 ("target/riscv: misa to ISA string conversion fix") has the
full context.
While we're at it, move both satp and the multi-letter extension
properties to kvm_riscv_add_cpu_user_properties() as well.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20230925175709.35696-14-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 25 Sep 2023 17:57:02 +0000 (14:57 -0300)]
target/riscv: move KVM only files to kvm subdir
Move the files to a 'kvm' dir to promote more code separation between
accelerators and making our lives easier supporting build options such
as --disable-tcg.
Rename kvm.c to kvm-cpu.c to keep it in line with its TCG counterpart.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20230925175709.35696-13-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 25 Sep 2023 17:57:01 +0000 (14:57 -0300)]
target/riscv: introduce KVM AccelCPUClass
Add a KVM accelerator class like we did with TCG. The difference is
that, at least for now, we won't be using a realize() implementation for
this accelerator.
We'll start by assiging kvm_riscv_cpu_add_kvm_properties(), renamed to
kvm_cpu_instance_init(), as a 'cpu_instance_init' implementation. Change
riscv_cpu_post_init() to invoke accel_cpu_instance_init(), which will go
through the 'cpu_instance_init' impl of the current acceleration (if
available) and execute it. The end result is that the KVM initial setup,
i.e. starting registers and adding its specific properties, will be done
via this hook.
Add a 'tcg_enabled()' condition in riscv_cpu_post_init() to avoid
calling riscv_cpu_add_user_properties() when running KVM. We'll remove
this condition when the TCG accel class get its own 'cpu_instance_init'
implementation.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20230925175709.35696-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 25 Sep 2023 17:57:00 +0000 (14:57 -0300)]
target/riscv: remove kvm-stub.c
This file is not needed for some time now. Both kvm_riscv_reset_vcpu()
and kvm_riscv_set_irq() have public declarations in kvm_riscv.h and are
wrapped in 'if kvm_enabled()' blocks that the compiler will rip it out
in non-KVM builds.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20230925175709.35696-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 25 Sep 2023 17:56:59 +0000 (14:56 -0300)]
target/riscv: make riscv_add_satp_mode_properties() public
This function is used for both accelerators. Make it public, and call it
from kvm_riscv_cpu_add_kvm_properties(). This will make it easier to
split KVM specific code for the KVM accelerator class in the next patch.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20230925175709.35696-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 25 Sep 2023 17:56:58 +0000 (14:56 -0300)]
target/riscv: move riscv_cpu_add_kvm_properties() to kvm.c
We'll introduce the KVM accelerator class with a 'cpu_instance_init'
implementation that is going to be invoked during the common
riscv_cpu_post_init() (via accel_cpu_instance_init()). This
instance_init will execute KVM exclusive code that TCG doesn't care
about, such as adding KVM specific properties, initing registers using a
KVM scratch CPU and so on.
The core of the forementioned cpu_instance_init impl is the current
riscv_cpu_add_kvm_properties() that is being used by the common code via
riscv_cpu_add_user_properties() in cpu.c. Move it to kvm.c, together
will all the relevant artifacts, exporting and renaming it to
kvm_riscv_cpu_add_kvm_properties() so cpu.c can keep using it for now.
To make this work we'll need to export riscv_cpu_extensions,
riscv_cpu_vendor_exts and riscv_cpu_experimental_exts from cpu.c as
well. The TCG accelerator will also need to access those in the near
future so this export will benefit us in the long run.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20230925175709.35696-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 25 Sep 2023 17:56:57 +0000 (14:56 -0300)]
target/riscv/cpu.c: mark extensions arrays as 'const'
We'll need to export these arrays to the accelerator classes in the next
patches. Mark them as 'const' now because they should not be modified at
runtime.
Note that 'riscv_cpu_options' will also be exported, but can't be marked
as 'const', because the properties are changed via
qdev_property_add_static().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20230925175709.35696-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 25 Sep 2023 17:56:56 +0000 (14:56 -0300)]
target/riscv: move 'host' CPU declaration to kvm.c
This CPU only exists if we're compiling with KVM so move it to the kvm
specific file.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20230925175709.35696-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 25 Sep 2023 17:56:55 +0000 (14:56 -0300)]
target/riscv/cpu.c: add .instance_post_init()
All generic CPUs call riscv_cpu_add_user_properties(). The 'max' CPU
calls riscv_init_max_cpu_extensions(). Both can be moved to a common
instance_post_init() callback, implemented in riscv_cpu_post_init(),
called by all CPUs. The call order then becomes:
riscv_cpu_init() -> cpu_init() of each CPU -> .instance_post_init()
In the near future riscv_cpu_post_init() will call the init() function
of the current accelerator, providing a hook for KVM and TCG accel
classes to change the init() process of the CPU.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20230925175709.35696-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 25 Sep 2023 17:56:54 +0000 (14:56 -0300)]
target/riscv: move riscv_tcg_ops to tcg-cpu.c
Move the remaining of riscv_tcg_ops now that we have a working realize()
implementation.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20230925175709.35696-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 25 Sep 2023 17:56:53 +0000 (14:56 -0300)]
target/riscv: move riscv_cpu_validate_set_extensions() to tcg-cpu.c
This function is the core of the RISC-V validations for TCG CPUs, and it
has a lot going on.
Functions in cpu.c were made public to allow them to be used by the KVM
accelerator class later on. 'cpu_cfg_ext_get_min_version()' is notably
hard to move it to another file due to its dependency with isa_edata_arr[]
array, thus make it public and use it as is for now.
riscv_cpu_validate_set_extensions() is kept public because it's used by
csr.c in write_misa().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20230925175709.35696-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 25 Sep 2023 17:56:52 +0000 (14:56 -0300)]
target/riscv: move riscv_cpu_realize_tcg() to TCG::cpu_realizefn()
riscv_cpu_realize_tcg() was added to allow TCG cpus to have a different
realize() path during the common riscv_cpu_realize(), making it a good
choice to start moving TCG exclusive code to tcg-cpu.c.
Rename it to tcg_cpu_realizefn() and assign it as a implementation of
accel::cpu_realizefn(). tcg_cpu_realizefn() will then be called during
riscv_cpu_realize() via cpu_exec_realizefn(). We'll use a similar
approach with KVM in the near future.
riscv_cpu_validate_set_extensions() is too big and with too many
dependencies to be moved in this same patch. We'll do that next.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <
20230925175709.35696-3-dbarboza@ventanamicro.com>
[ Changes by AF:
- Renames to fix build failures after rebase
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Mon, 25 Sep 2023 17:56:51 +0000 (14:56 -0300)]
target/riscv: introduce TCG AccelCPUClass
target/riscv/cpu.c needs to handle all possible accelerators (TCG and
KVM at this moment) during both init() and realize() time. This forces
us to resort to a lot of "if tcg" and "if kvm" throughout the code,
which isn't wrong, but can get cluttered over time. Splitting
acceleration specific code from cpu.c to its own file will help to
declutter the existing code and it will also make it easier to support
KVM/TCG only builds in the future.
We'll start by adding a new subdir called 'tcg' and a new file called
'tcg-cpu.c'. This file will be used to introduce a new accelerator class
for TCG acceleration in RISC-V, allowing us to center all TCG exclusive
code in its file instead of using 'cpu.c' for everything. This design is
inpired by the work Claudio Fontana did in x86 a few years ago in commit
f5cc5a5c1 ("i386: split cpu accelerators from cpu.c, using
AccelCPUClass").
To avoid moving too much code at once we'll start by adding the new file
and TCG AccelCPUClass declaration. The 'class_init' from the accel class
will init 'tcg_ops', relieving the common riscv_cpu_class_init() from
doing it.
'riscv_tcg_ops' is being exported from 'cpu.c' for now to avoid having
to deal with moving code and files around right now. We'll focus on
decoupling the realize() logic first.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20230925175709.35696-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Alvin Chang [Thu, 7 Sep 2023 08:45:00 +0000 (16:45 +0800)]
disas/riscv: Fix the typo of inverted order of pmpaddr13 and pmpaddr14
Fix the inverted order of pmpaddr13 and pmpaddr14 in csr_name().
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20230907084500.328-1-alvinga@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
liguang.zhang [Wed, 13 Sep 2023 09:13:21 +0000 (17:13 +0800)]
target/riscv: Clear CSR values at reset and sync MPSTATE with host
This patch fixes guest reboot errors when using KVM.
There are two issues when rebooting a guest using KVM
1. When the guest initiates a reboot the host is unable to stop the vcpu
2. When running a SMP guest the qemu monitor system_reset causes a vcpu crash
This can be fixed by clearing the CSR values at reset and syncing the
MPSTATE with the host.
Signed-off-by: liguang.zhang <liguang.zhang@hexintek.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20230913091332.17355-1-
18622748025@163.com>
[ Changes by AF
- Fixup commit message
- Fixup patch style
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 12 Sep 2023 13:24:23 +0000 (10:24 -0300)]
target/riscv/cpu.c: consider user option with RVG
Enabling RVG will enable a set of extensions that we're not checking if
the user was okay enabling or not. And in this case we want to error
out, instead of ignoring, otherwise we will be inconsistent enabling RVG
without all its extensions.
After this patch, disabling ifencei or icsr while enabling RVG will
result in error:
$ ./build/qemu-system-riscv64 -M virt -cpu rv64,g=true,Zifencei=false --nographic
qemu-system-riscv64: RVG requires Zifencei but user set Zifencei to false
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <
20230912132423.268494-21-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 12 Sep 2023 13:24:22 +0000 (10:24 -0300)]
target/riscv/cpu.c: honor user choice in cpu_cfg_ext_auto_update()
Add a new cpu_cfg_ext_is_user_set() helper to check if an extension was
set by the user in the command line. Use it inside
cpu_cfg_ext_auto_update() to verify if the user set a certain extension
and, if that's the case, do not change its value.
This will make us honor user choice instead of overwriting the values.
Users will then be informed whether they're using an incompatible set of
extensions instead of QEMU setting a magic value that works.
The reason why we're not implementing user choice for MISA extensions
right now is because, today, we do not silently change any MISA bit
during realize() time (we do warn when enabling bits if RVG is enabled).
We do that - a lot - with multi-letter extensions though, so we're
handling the most immediate concern first.
After this patch, we'll now error out if the user explicitly set 'zce' to true
and 'zca' to false:
$ ./build/qemu-system-riscv64 -M virt -cpu rv64,zce=true,zca=false -nographic
qemu-system-riscv64: Zcf/Zcd/Zcb/Zcmp/Zcmt extensions require Zca extension
This didn't happen before because we were enabling 'zca' if 'zce' was enabled
regardless if the user set 'zca' to false.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <
20230912132423.268494-20-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 12 Sep 2023 13:24:21 +0000 (10:24 -0300)]
target/riscv: use isa_ext_update_enabled() in init_max_cpu_extensions()
Before adding support to detect if an extension was user set we need to
handle how we're enabling extensions in riscv_init_max_cpu_extensions().
object_property_set_bool() calls the set() callback for the property,
and we're going to use this callback to set the 'multi_ext_user_opts'
hash.
This means that, as is today, all extensions we're setting for the 'max'
CPU will be seen as user set in the future. Let's change set_bool() to
isa_ext_update_enabled() that will just enable/disable the flag on a
certain offset.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <
20230912132423.268494-19-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 12 Sep 2023 13:24:20 +0000 (10:24 -0300)]
target/riscv/cpu.c: introduce RISCVCPUMultiExtConfig
If we want to make better decisions when auto-enabling extensions during
realize() we need a way to tell if an user set an extension manually.
The RISC-V KVM driver has its own solution via a KVMCPUConfig struct
that has an 'user_set' flag that is set during the Property set()
callback. The set() callback also does init() time validations based on
the current KVM driver capabilities.
For TCG we would want a 'user_set' mechanic too, but we would look
ad-hoc via cpu_cfg_ext_auto_update() if a certain extension was user set
or not. If we copy what was made in the KVM side we would look for
'user_set' for one into 60+ extension structs spreaded in 3 arrays
(riscv_cpu_extensions, riscv_cpu_experimental_exts,
riscv_cpu_vendor_exts).
We'll still need an extension struct but we won't be using the
'user_set' flag:
- 'RISCVCPUMultiExtConfig' will be our specialized structure, similar to what
we're already doing with the MISA extensions in 'RISCVCPUMisaExtConfig'.
DEFINE_PROP_BOOL() for all 3 extensions arrays were replaced by
MULTI_EXT_CFG_BOOL(), a macro that will init our specialized struct;
- the 'multi_ext_user_opts' hash will be used to store the offset of each
extension that the user set via the set() callback, cpu_set_multi_ext_cfg().
For now we're just initializing and populating it - next patch will use
it to determine if a certain extension was user set;
- cpu_add_multi_ext_prop() is a new helper that will replace the
qdev_property_add_static() calls that our macros are doing to populate
user properties. The macro was renamed to ADD_CPU_MULTIEXT_PROPS_ARRAY()
for clarity. Note that the non-extension properties in
riscv_cpu_options[] still need to be declared via qdev().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <
20230912132423.268494-18-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 12 Sep 2023 13:24:19 +0000 (10:24 -0300)]
target/riscv/cpu.c: use cpu_cfg_ext_auto_update() during realize()
Let's change the other instances in realize() where we're enabling an
extension based on a certain criteria (e.g. it's a dependency of another
extension).
We're leaving icsr and ifencei being enabled during RVG for later -
we'll want to error out in that case. Every other extension enablement
during realize is now done via cpu_cfg_ext_auto_update().
The end goal is that only cpu init() functions will handle extension
flags directly via "cpu->cfg.ext_N = true|false".
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <
20230912132423.268494-17-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 12 Sep 2023 13:24:18 +0000 (10:24 -0300)]
target/riscv/cpu.c: introduce cpu_cfg_ext_auto_update()
During realize() time we're activating a lot of extensions based on some
criteria, e.g.:
if (cpu->cfg.ext_zk) {
cpu->cfg.ext_zkn = true;
cpu->cfg.ext_zkr = true;
cpu->cfg.ext_zkt = true;
}
This practice resulted in at least one case where we ended up enabling
something we shouldn't: RVC enabling zca/zcd/zcf when using a CPU that
has priv_spec older than 1.12.0.
We're also not considering user choice. There's no way of doing it now
but this is about to change in the next few patches.
cpu_cfg_ext_auto_update() will check for priv version mismatches before
enabling extensions. If we have a mismatch between the current priv
version and the extension we want to enable, do not enable it. In the
near future, this same function will also consider user choice when
deciding if we're going to enable/disable an extension or not.
For now let's use it to handle zca/zcd/zcf enablement if RVC is enabled.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <
20230912132423.268494-16-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 12 Sep 2023 13:24:17 +0000 (10:24 -0300)]
target/riscv: make CPUCFG() macro public
The RISC-V KVM driver uses a CPUCFG() macro that calculates the offset
of a certain field in the struct RISCVCPUConfig. We're going to use this
macro in target/riscv/cpu.c as well in the next patches. Make it public.
Rename it to CPU_CFG_OFFSET() for more clarity while we're at it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <
20230912132423.268494-15-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 12 Sep 2023 13:24:16 +0000 (10:24 -0300)]
target/riscv/cpu.c: use offset in isa_ext_is_enabled/update_enabled
We'll have future usage for a function where, given an offset of the
struct RISCVCPUConfig, the flag is updated to a certain val.
Change all existing callers to use edata->ext_enable_offset instead of
'edata'.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <
20230912132423.268494-14-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 12 Sep 2023 13:24:15 +0000 (10:24 -0300)]
target/riscv: deprecate the 'any' CPU type
The 'any' CPU type was introduced in commit
dc5bd18fa5725 ("RISC-V CPU
Core Definition"), being around since the beginning. It's not an easy
CPU to use: it's undocumented and its name doesn't tell users much about
what the CPU is supposed to bring. 'git log' doesn't help us either in
knowing what was the original design of this CPU type.
The closest we have is a comment from Alistair [1] where he recalls from
memory that the 'any' CPU is supposed to behave like the newly added
'max' CPU. He also suggested that the 'any' CPU should be removed.
The default CPUs are rv32 and rv64, so removing the 'any' CPU will have
impact only on users that might have a script that uses '-cpu any'.
And those users are better off using the default CPUs or the new 'max'
CPU.
We would love to just remove the code and be done with it, but one does
not simply remove a feature in QEMU. We'll put the CPU in quarantine
first, letting users know that we have the intent of removing it in the
future.
[1] https://lists.gnu.org/archive/html/qemu-devel/2023-07/msg02891.html
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <
20230912132423.268494-13-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 12 Sep 2023 13:24:14 +0000 (10:24 -0300)]
avocado, risc-v: add tuxboot tests for 'max' CPU
Add smoke tests to ensure that we'll not break the 'max' CPU type when
adding new frozen/ratified RISC-V extensions.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <
20230912132423.268494-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 12 Sep 2023 13:24:13 +0000 (10:24 -0300)]
target/riscv: add 'max' CPU type
The 'max' CPU type is used by tooling to determine what's the most
capable CPU a current QEMU version implements. Other archs such as ARM
implements this type. Let's add it to RISC-V.
What we consider "most capable CPU" in this context are related to
ratified, non-vendor extensions. This means that we want the 'max' CPU
to enable all (possible) ratified extensions by default. The reasoning
behind this design is (1) vendor extensions can conflict with each other
and we won't play favorities deciding which one is default or not and
(2) non-ratified extensions are always prone to changes, not being
stable enough to be enabled by default.
All this said, we're still not able to enable all ratified extensions
due to conflicts between them. Zfinx and all its dependencies aren't
enabled because of a conflict with RVF. zce, zcmp and zcmt are also
disabled due to RVD conflicts. When running with 64 bits we're also
disabling zcf.
MISA bits RVG, RVJ and RVV are also being set manually since they're
default disabled.
This is the resulting 'riscv,isa' DT for this new CPU:
rv64imafdcvh_zicbom_zicboz_zicsr_zifencei_zihintpause_zawrs_zfa_
zfh_zfhmin_zca_zcb_zcd_zba_zbb_zbc_zbkb_zbkc_zbkx_zbs_zk_zkn_zknd_
zkne_zknh_zkr_zks_zksed_zksh_zkt_zve32f_zve64f_zve64d_
smstateen_sscofpmf_sstc_svadu_svinval_svnapot_svpbmt
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <
20230912132423.268494-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 12 Sep 2023 13:24:12 +0000 (10:24 -0300)]
target/riscv/cpu.c: limit cfg->vext_spec log message
Inside riscv_cpu_validate_v() we're always throwing a log message if the
user didn't set a vector version via 'vext_spec'.
We're going to include one case with the 'max' CPU where env->vext_ver
will be set in the cpu_init(). But that alone will not stop the "vector
version is not specified" message from appearing. The usefulness of this
log message is debatable for the generic CPUs, but for a 'max' CPU type,
where we are supposed to deliver a CPU model with all features possible,
it's strange to force users to set 'vext_spec' to get rid of this
message.
Change riscv_cpu_validate_v() to not throw this log message if
env->vext_ver is already set.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <
20230912132423.268494-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 12 Sep 2023 13:24:11 +0000 (10:24 -0300)]
target/riscv/cpu.c: add riscv_cpu_add_kvm_unavail_prop_array()
Use a helper in riscv_cpu_add_kvm_properties() to eliminate some of its
code repetition.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <
20230912132423.268494-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 12 Sep 2023 13:24:10 +0000 (10:24 -0300)]
target/riscv/cpu.c: add riscv_cpu_add_qdev_prop_array()
The code inside riscv_cpu_add_user_properties() became quite repetitive
after recent changes. Add a helper to hide the repetition away.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <
20230912132423.268494-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 12 Sep 2023 13:24:09 +0000 (10:24 -0300)]
target/riscv/cpu.c: split vendor exts from riscv_cpu_extensions[]
Our goal is to make riscv_cpu_extensions[] hold only ratified,
non-vendor extensions.
Create a new riscv_cpu_vendor_exts[] array for them, changing
riscv_cpu_add_user_properties() and riscv_cpu_add_kvm_properties()
accordingly.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <
20230912132423.268494-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 12 Sep 2023 13:24:08 +0000 (10:24 -0300)]
target/riscv/cpu.c: split non-ratified exts from riscv_cpu_extensions[]
Create a new riscv_cpu_experimental_exts[] to store the non-ratified
extensions properties. Once they are ratified we'll move them back to
riscv_cpu_extensions[].
riscv_cpu_add_user_properties() and riscv_cpu_add_kvm_properties() are
changed to keep adding non-ratified properties to users.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <
20230912132423.268494-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 12 Sep 2023 13:24:07 +0000 (10:24 -0300)]
target/riscv: add DEFINE_PROP_END_OF_LIST() to riscv_cpu_options[]
Add DEFINE_PROP_END_OF_LIST() and eliminate the ARRAY_SIZE() usage when
iterating in the riscv_cpu_options[] array, making it similar to what
we already do when working with riscv_cpu_extensions[].
We also have a more sophisticated motivation behind this change. In the
future we might need to export riscv_cpu_options[] to other files, and
ARRAY_LIST() doesn't work properly in that case because the array size
isn't exposed to the header file. Here's a future sight of what we would
deal with:
./target/riscv/kvm.c:1057:5: error: nested extern declaration of 'riscv_cpu_add_misa_properties' [-Werror=nested-externs]
n file included from ../target/riscv/kvm.c:19:
home/danielhb/work/qemu/include/qemu/osdep.h:473:31: error: invalid application of 'sizeof' to incomplete type 'const RISCVCPUMultiExtConfig[]'
473 | #define ARRAY_SIZE(x) ((sizeof(x) / sizeof((x)[0])) + \
| ^
./target/riscv/kvm.c:1047:29: note: in expansion of macro 'ARRAY_SIZE'
1047 | for (int i = 0; i < ARRAY_SIZE(_array); i++) { \
| ^~~~~~~~~~
./target/riscv/kvm.c:1059:5: note: in expansion of macro 'ADD_UNAVAIL_KVM_PROP_ARRAY'
1059 | ADD_UNAVAIL_KVM_PROP_ARRAY(obj, riscv_cpu_extensions);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
home/danielhb/work/qemu/include/qemu/osdep.h:473:31: error: invalid application of 'sizeof' to incomplete type 'const RISCVCPUMultiExtConfig[]'
473 | #define ARRAY_SIZE(x) ((sizeof(x) / sizeof((x)[0])) + \
| ^
./target/riscv/kvm.c:1047:29: note: in expansion of macro 'ARRAY_SIZE'
1047 | for (int i = 0; i < ARRAY_SIZE(_array); i++) { \
Homogenize the present and change the future by using
DEFINE_PROP_END_OF_LIST() in riscv_cpu_options[].
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <
20230912132423.268494-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 12 Sep 2023 13:24:06 +0000 (10:24 -0300)]
target/riscv/cpu.c: split kvm prop handling to its own helper
Future patches will split the existing Property arrays even further, and
the existing code in riscv_cpu_add_user_properties() will start to scale
bad with it because it's dealing with KVM constraints mixed in with TCG
constraints. We're going to pay a high price to share a couple of common
lines of code between the two.
Create a new kvm_riscv_cpu_add_kvm_properties() helper that will be
forked from riscv_cpu_add_user_properties() if we're running KVM. The
helper includes all properties that a KVM CPU will add. The rest of
riscv_cpu_add_user_properties() body will then be relieved from having
to deal with KVM constraints.
The helper was declared in kvm_stubs.h, while being implemented in
cpu.c, to allow '--enable-debug' builds to work. The compiler won't
remove the kvm_riscv_cpu_add_kvm_properties() reference when
'kvm_enabled()' is false if we end up with an unused function. Even
though being a KVM only helper we can't implement it in kvm.c due to its
many dependencies inside cpu.c, so make it public in kvm_riscv.h and
keep its implementation in cpu.c for now. We'll move it to kvm.c in the
near future.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <
20230912132423.268494-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 12 Sep 2023 13:24:05 +0000 (10:24 -0300)]
target/riscv/cpu.c: skip 'bool' check when filtering KVM props
After the introduction of riscv_cpu_options[] all properties in
riscv_cpu_extensions[] are booleans. This check is now obsolete.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <
20230912132423.268494-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza [Tue, 12 Sep 2023 13:24:04 +0000 (10:24 -0300)]
target/riscv/cpu.c: split CPU options from riscv_cpu_extensions[]
We'll add a new CPU type that will enable a considerable amount of
extensions. To make it easier for us we'll do a few cleanups in our
existing riscv_cpu_extensions[] array.
Start by splitting all CPU non-boolean options from it. Create a new
riscv_cpu_options[] array for them. Add all these properties in
riscv_cpu_add_user_properties() as it is already being done today.
'mmu' and 'pmp' aren't really extensions in the usual way we think about
RISC-V extensions. These are closer to CPU features/options, so move
both to riscv_cpu_options[] too. In the near future we'll need to match
all extensions with all entries in isa_edata_arr[], and so it happens
that both 'mmu' and 'pmp' do not have a riscv,isa string (thus, no priv
spec version restriction). This further emphasizes the point that these
are more a CPU option than an extension.
No functional changes made.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <
20230912132423.268494-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Philippe Mathieu-Daudé [Mon, 9 Oct 2023 09:09:52 +0000 (11:09 +0200)]
cpus: Remove unused smp_cores/smp_threads declarations
Commit
a5e0b33119 ("vl.c: Replace smp global variables
with smp machine properties") removed the last uses of
the smp_cores / smp_threads variables but forgot to
remove their declarations. Do it now.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth [Fri, 6 Oct 2023 04:52:56 +0000 (06:52 +0200)]
scripts/xml-preprocess: Make sure this script is invoked via the right Python
If a script is executable and has a shebang line, Meson treats it as
a normal executable, so that this script here is run via the "python3"
binary in the $PATH. However, "python3" might not be in the $PATH at
all, or it might be a wrong version, so we should make sure to run
this script via the Python version that has been chosen for the QEMU
build process. The best way to do this is to remove the executable bit
from the access mode bits. (See also commit
4b424c757188f7a4)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1918
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Olaf Hering [Mon, 2 Oct 2023 10:18:44 +0000 (12:18 +0200)]
roms: use PYTHON to invoke python
python3 may not be the expected python version.
Use PYTHON to invoke python.
Fixes:
22e11539e1 ("edk2: replace build scripts")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth [Fri, 29 Sep 2023 14:19:18 +0000 (16:19 +0200)]
MAINTAINERS: Add some unowned files to the SBSA-REF section
These files belong to the sbsa-ref machine and thus should
be listed here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Philippe Mathieu-Daudé [Mon, 20 Feb 2023 11:02:35 +0000 (12:02 +0100)]
MAINTAINERS: Add section for overall sensors
Sensor devices depend on some bus, not a particular board.
While merged for a particular board, sensor devices don't
depend on it. They depend on a bus technology, and can be
used by any board exposing such bus.
In order to help merging sensor patches, when they fall out
of a particular board tree, add a section covering overall
sensors, to help out with patch review and merge queue
handling.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cornelia Huck [Fri, 29 Sep 2023 14:30:12 +0000 (16:30 +0200)]
MAINTAINERS: add standard-headers to Hosts/LINUX
The files in there are updated via update-linux-headers.sh.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth [Fri, 29 Sep 2023 13:16:36 +0000 (15:16 +0200)]
MAINTAINERS: Add the CI-related doc files to the CI section
The docs/devel/ci* were not covered yet, add them to MAINTAINERS
so that the right people are put on CC: for related patches.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth [Fri, 29 Sep 2023 12:44:39 +0000 (14:44 +0200)]
MAINTAINERS: Add include folder to the hw/char/ section
The "Character devices" section only covers hw/char/ but
misses the corresponding include/hw/char/ folder. Add it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth [Fri, 29 Sep 2023 12:37:27 +0000 (14:37 +0200)]
MAINTAINERS: Add unowned RISC-V related files to the right sections
There are a bunch of RISC-V files that are currently not covered
by the "get_maintainers.pl" script. Add them to the right sections
in MAINTAINERS to fix this problem.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth [Fri, 29 Sep 2023 14:09:35 +0000 (16:09 +0200)]
MAINTAINERS: Add g364fb and ds1225y to the Jazz section
These devices are only used by the Jazz machine, so they
should be listed in the corresponding section in MAINTAINERS.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Pierre Labatut [Thu, 28 Sep 2023 12:56:59 +0000 (12:56 +0000)]
Fix compilation when UFFDIO_REGISTER is not set.
Signed-off-by: Pierre Labatut <plabatut@google.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Hajnoczi [Wed, 11 Oct 2023 13:43:10 +0000 (09:43 -0400)]
Merge tag 'pull-omnibus-111023-1' of https://gitlab.com/stsquad/qemu into staging
testing, gdbstub and plugin updates
- enable more sbsa-ref tests in avocado
- add swtpm to the package lists
- reduce avocado noise in gitlab by limiting tests
- make docker engine choice driven by configure and enable override
- remove unneeded gcc suffix on some cross compilers
- fix some NULL returns in gdbstub
- improve locking in execlog plugin
- introduce the GDBFeature structure
- consistently set gdb_core_xml_file
- use cleaner escaping for gdb xml
- drop ancient gdb_has_xml() test
- disable multi-instruction GUSA emulation when plugins enabled
- fix some coverity issues in plugins
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmUmVJkACgkQ+9DbCVqe
# KkTfNggAiS02FcL3faGjAN9+60xhvEQ3DJjI473hjvFWu0bSkQTjObcQqGc+V7Cw
# 9yNtnxOOWB6KdAU8At7HlVqiUXeyTCJB7Att5/UgNUZj63j+cs7PXb4p7cVCcJOc
# 17zni22tnmCBcC8wZaz0yj68jaftL3hz1QNUZOmv6CBt42q0+/4g1WKfaJ+w+SbK
# T7cJEiMDObm8qeNAAXpDLB+9v3bRDxMZ8hFJ3p3CatQC8jbDrkuH7RrVPHDWiWQx
# w0uXpUHlZEOVX23v6+iIoeb8YQW2bZI9UsfeyIHJlENaVgyL200LHgLvvAE4Qd63
# dCtfQUZzj4t9sfoL4XgxaB7G4qtXTg==
# =7PLI
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 11 Oct 2023 03:54:01 EDT
# gpg: using RSA key
6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-omnibus-111023-1' of https://gitlab.com/stsquad/qemu: (25 commits)
contrib/plugins: fix coverity warning in hotblocks
contrib/plugins: fix coverity warning in lockstep
contrib/plugins: fix coverity warning in cache
plugins: Set final instruction count in plugin_gen_tb_end
target/sh4: Disable decode_gusa when plugins enabled
accel/tcg: Add plugin_enabled to DisasContextBase
gdbstub: Replace gdb_regs with an array
gdbstub: Remove gdb_has_xml variable
target/ppc: Remove references to gdb_has_xml
target/arm: Remove references to gdb_has_xml
gdbstub: Use g_markup_printf_escaped()
hw/core/cpu: Return static value with gdb_arch_name()
target/arm: Move the reference to arm-core.xml
gdbstub: Introduce GDBFeature structure
contrib/plugins: Use GRWLock in execlog
plugins: Check if vCPU is realized
gdbstub: Fix target.xml response
gdbstub: Fix target_xml initialization
configure: remove gcc version suffixes
configure: allow user to override docker engine
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 11 Oct 2023 13:42:39 +0000 (09:42 -0400)]
Merge tag 'migration-
20231011-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request (
20231011 edition)
Hi
In this pull request:
- Markus RDMA cleanup series
- recover fixes from peter
- migration capability from fabiano
- negative migration test from fabiano.
Please, pull.
Thanks, Juan.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmUmaQ8ACgkQ9IfvGFhy
# 1yN9fA//SBnea3Wl2158J673l5aaI8Vp/1PjfzvNdcr/6EQbXZBgug+haQ3n5Hhf
# USNRhemrCkpZAGCUf07g9pfF4R/Jsq1OkOrWF4e6gAaZPNU4V5F7VKBk8pmFMLtr
# Kk2XgnH2ZPaFEvts0qBrOfvDHH8gOzzjpF2HGrioM8Zr3p1JHz9OqJoSyawLF0U7
# YFTq2jJSgaOQ6ax1+L8hLLuXlmNccBaTWT8Cv0rbPEgcwrJOM/wMfmd6O39ps929
# yS5NnxqqkrprTDjmeGOgOQd0Cy/flinnzmu+BVMO6/ns9Hu6q1TGG6D+DOBdgmHH
# jq7Ej5VILtXWOoZtXLHqA1Xt73ciVlmditVupoC+5vtIJou2JseClutOp98qxxzV
# llMF7ldHbRTWnu7qIrwv2OINarowR0pIZfkJqBc6dNHHScwMCnX5L9YAvNePEo2V
# 1oJpbqW7mmgwdlFAiKFD+AE6qUWxcnzOvPf+fzWrJMi507Kv5nmxQWTHw9dsFs7k
# neWnK21t0s2t77+vVBtLlr06JESG+WndzvQsXKZu8Pd0+ASnzpX8pRVzxEPk5EiH
# fT9bhXOCvxTTHulznjkOApODE5NF+KlHAFXU87cSIkdi/6JfzcvTe6KeeIPC248Q
# jk3nVlhds1xajTcPAK7HF5Ta6R8rNdTZ6q/kFNhLaTGqv9agxDU=
# =hekO
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 11 Oct 2023 05:21:19 EDT
# gpg: using RSA key
1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-
20231011-pull-request' of https://gitlab.com/juan.quintela/qemu: (65 commits)
migration: Add migration_rp_wait|kick()
migration: Remember num of ramblocks to sync during recovery
qemufile: Always return a verbose error
migration: Introduce migrate_has_error()
migration: Display error in query-migrate irrelevant of status
migration/rdma: Replace flawed device detail dump by tracing
migration/rdma: Use error_report() & friends instead of stderr
migration/rdma: Downgrade qemu_rdma_cleanup() errors to warnings
migration/rdma: Silence qemu_rdma_register_and_get_keys()
migration/rdma: Silence qemu_rdma_block_for_wrid()
migration/rdma: Don't report received completion events as error
migration/rdma: Silence qemu_rdma_reg_control()
migration/rdma: Silence qemu_rdma_connect()
migration/rdma: Silence qemu_rdma_resolve_host()
migration/rdma: Convert qemu_rdma_alloc_pd_cq() to Error
migration/rdma: Convert qemu_rdma_post_recv_control() to Error
migration/rdma: Convert qemu_rdma_post_send_control() to Error
migration/rdma: Convert qemu_rdma_write() to Error
migration/rdma: Convert qemu_rdma_write_one() to Error
migration/rdma: Convert qemu_rdma_write_flush() to Error
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 11 Oct 2023 13:42:14 +0000 (09:42 -0400)]
Merge tag 'audio-pull-request' of https://gitlab.com/marcandre.lureau/qemu into staging
Audio es1370 fix & cleanups
# -----BEGIN PGP SIGNATURE-----
#
# iQJQBAABCAA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAmUmQIQcHG1hcmNhbmRy
# ZS5sdXJlYXVAcmVkaGF0LmNvbQAKCRDa6OEJdZac5UiED/0VjK4J6I+MYljyJePj
# ki62XC/dtojuxkE+nwsTrU54u86776TLmthRYyHOffSs8mDpk0ynY6sWD99T4r1b
# 9Szmm9FJM658RSpN9i128JAiHKD9Vth7UUpekrLIBgRsW5lGuQFapHouTB1wa3hm
# 8ZszUNAGEpAgGM2My9t+pvGy8lrOZan2ZAlQzKfMc+msYTnivK6huzjVw/xUc0kD
# vzfpVMgKntvl391IBf9hFBBrJCWRtDrydtPl1/PxpVj/96FGIxlx+o30X8z9hSzA
# yg96XfwmS/mgqFsw8QqtFyrkSE3iD2yzcrepjtK+erwcv6M0BVG38wn89F571Lcl
# Ga8PcqBd7pP0nMXrgjbX8qB6t58TPipEbFMeS2iabO4pwz0jy9aCVQJ2GZqHNqaF
# VoMN5hEDBhanxFcNEcjSWZEfJOvK7uVLAZ2Xdqcrsm50ESTu55H/BIQWFipTGlqu
# +BlvfpwVYXGziuDsj8h4cUGvyuMY02XWsBU9qvl5aCiyWoyED0ZlR2UJ0jVjn68K
# RUbTrxSMF9hLgI1j8FYkNgXMBuR4+Sopc7vp//AXpp92/yxTNCbe44Y06C9iaib1
# 0zrYhd4rfTn0MX+YM9IUKzvoNSVY6VxHoTucyTM9HcT7XtCnmwnMzjY4yGxQ6k3V
# X0WBPpH4mCyXla7TJ0zwbnvH0A==
# =B/KL
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 11 Oct 2023 02:28:20 EDT
# gpg: using RSA key
87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* tag 'audio-pull-request' of https://gitlab.com/marcandre.lureau/qemu:
hw/audio/es1370: trace lost interrupts
hw/audio/es1370: change variable type and name
hw/audio/es1370: block structure coding style fixes
hw/audio/es1370: remove #ifdef ES1370_VERBOSE to avoid bit rot
hw/audio/es1370: remove #ifdef ES1370_DEBUG to avoid bit rot
hw/audio/es1370: remove unused dolog macro
hw/audio/es1370: replace bit-rotted code with tracepoints
hw/audio/es1370: reset current sample counter
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Daniel Xu [Sun, 1 Oct 2023 18:38:26 +0000 (12:38 -0600)]
qapi: qga: Clarify when out-data and err-data are populated
If output is being captured for a guest-exec invocation, the out-data
and err-data fields of guest-exec-status are only populated after the
process is reaped. This is somewhat counter intuitive and too late to
change. Thus, it would be good to document the behavior.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Daniel Xu [Sun, 1 Oct 2023 18:38:25 +0000 (12:38 -0600)]
qga: Fix memory leak when output stream is unused
If capture-output is requested but one of the channels goes unused (eg.
we attempt to capture stderr but the command never writes to stderr), we
can leak memory.
guest_exec_output_watch() is (from what I understand) unconditionally
called for both streams if output capture is requested. The first call
will always pass the `p->size == p->length` check b/c both values are
0. Then GUEST_EXEC_IO_SIZE bytes will be allocated for the stream.
But when we reap the exited process there's a `gei->err.length > 0`
check to actually free the buffer. Which does not get run if the command
doesn't write to the stream.
Fix by making free() unconditional.
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Akihiko Odaki [Thu, 10 Nov 2022 10:06:20 +0000 (19:06 +0900)]
qga: Remove platform GUID definitions
GUID_DEVINTERFACE_DISK and GUID_DEVINTERFACE_STORAGEPORT are already
defined by MinGW-w64. They are not only unnecessary, but can lead to
duplicate definition errors at link time with some unknown condition.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Jianlin Li [Fri, 22 Sep 2023 07:38:35 +0000 (15:38 +0800)]
Update AMD memory encryption document links.
The previous links for the white paper and programmer's manual
are no longer available. Replace them with the new ones.
Signed-off-by: Jianlin Li <ljianlin99@gmail.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Xu [Wed, 4 Oct 2023 22:02:37 +0000 (18:02 -0400)]
migration: Add migration_rp_wait|kick()
It's just a simple wrapper for rp_sem on either wait() or kick(), make it
even clearer on how it is used. Prepared to be used even for other things.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-ID: <
20231004220240.167175-8-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Peter Xu [Wed, 4 Oct 2023 22:02:36 +0000 (18:02 -0400)]
migration: Remember num of ramblocks to sync during recovery
Instead of only relying on the count of rp_sem, make the counter be part of
RAMState so it can be used in both threads to synchronize on the process.
rp_sem will be further reused in follow up patches, as a way to kick the
main thread, e.g., on recovery failures.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231004220240.167175-7-peterx@redhat.com>
Peter Xu [Wed, 4 Oct 2023 22:02:35 +0000 (18:02 -0400)]
qemufile: Always return a verbose error
There're a lot of cases where we only have an errno set in last_error but
without a detailed error description. When this happens, try to generate
an error contains the errno as a descriptive error.
This will be helpful in cases where one relies on the Error*. E.g.,
migration state only caches Error* in MigrationState.error. With this,
we'll display correct error messages in e.g. query-migrate when the error
was only set by qemu_file_set_error().
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231004220240.167175-6-peterx@redhat.com>
Peter Xu [Wed, 4 Oct 2023 22:02:32 +0000 (18:02 -0400)]
migration: Introduce migrate_has_error()
Introduce a helper to detect whether MigrationState.error is set for
whatever reason.
This is preparation work for any thread (e.g. source return path thread) to
setup errors in an unified way to MigrationState, rather than relying on
its own way to set errors (mark_source_rp_bad()).
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231004220240.167175-3-peterx@redhat.com>
Peter Xu [Wed, 4 Oct 2023 22:02:31 +0000 (18:02 -0400)]
migration: Display error in query-migrate irrelevant of status
Display it as long as being set, irrelevant of FAILED status. E.g., it may
also be applicable to PAUSED stage of postcopy, to provide hint on what has
gone wrong.
The error_mutex seems to be overlooked when referencing the error, add it
to be very safe.
This will change QAPI behavior by showing up error message outside !FAILED
status, but it's intended and doesn't expect to break anyone.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=
2018404
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231004220240.167175-2-peterx@redhat.com>
Markus Armbruster [Thu, 28 Sep 2023 13:20:19 +0000 (15:20 +0200)]
migration/rdma: Replace flawed device detail dump by tracing
qemu_rdma_dump_id() dumps RDMA device details to stdout.
rdma_start_outgoing_migration() calls it via qemu_rdma_source_init()
and qemu_rdma_resolve_host() to show source device details.
rdma_start_incoming_migration() arranges its call via
rdma_accept_incoming_migration() and qemu_rdma_accept() to show
destination device details.
Two issues:
1. rdma_start_outgoing_migration() can run in HMP context. The
information should arguably go the monitor, not stdout.
2. ibv_query_port() failure is reported as error. Its callers remain
unaware of this failure (qemu_rdma_dump_id() can't fail), so
reporting this to the user as an error is problematic.
Fixable, but the device detail dump is noise, except when
troubleshooting. Tracing is a better fit. Similar function
qemu_rdma_dump_id() was converted to tracing in commit
733252deb8b (Tracify migration/rdma.c).
Convert qemu_rdma_dump_id(), too.
While there, touch up qemu_rdma_dump_gid()'s outdated comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20230928132019.
2544702-54-armbru@redhat.com>
Markus Armbruster [Thu, 28 Sep 2023 13:20:18 +0000 (15:20 +0200)]
migration/rdma: Use error_report() & friends instead of stderr
error_report() obeys -msg, reports the current error location if any,
and reports to the current monitor if any. Reporting to stderr
directly with fprintf() or perror() is wrong, because it loses all
this.
Fix the offenders. Bonus: resolves a FIXME about problematic use of
errno.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20230928132019.
2544702-53-armbru@redhat.com>
Markus Armbruster [Thu, 28 Sep 2023 13:20:17 +0000 (15:20 +0200)]
migration/rdma: Downgrade qemu_rdma_cleanup() errors to warnings
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_source_init(), qemu_rdma_connect(),
rdma_start_incoming_migration(), and rdma_start_outgoing_migration()
violate this principle: they call error_report() via
qemu_rdma_cleanup().
Moreover, qemu_rdma_cleanup() can't fail. It is called on error
paths, and QIOChannel close and finalization. Are the conditions it
reports really errors? I doubt it.
Downgrade qemu_rdma_cleanup()'s errors to warnings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20230928132019.
2544702-52-armbru@redhat.com>
Markus Armbruster [Thu, 28 Sep 2023 13:20:16 +0000 (15:20 +0200)]
migration/rdma: Silence qemu_rdma_register_and_get_keys()
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_write_one() violates this principle: it reports errors to
stderr via qemu_rdma_register_and_get_keys(). I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.
Clean this up: silence qemu_rdma_register_and_get_keys(). I believe
the caller's error reports suffice. If they don't, we need to convert
to Error instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20230928132019.
2544702-51-armbru@redhat.com>
Markus Armbruster [Thu, 28 Sep 2023 13:20:15 +0000 (15:20 +0200)]
migration/rdma: Silence qemu_rdma_block_for_wrid()
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_post_send_control(), qemu_rdma_exchange_get_response(), and
qemu_rdma_write_one() violate this principle: they call
error_report(), fprintf(stderr, ...), and perror() via
qemu_rdma_block_for_wrid(), qemu_rdma_poll(), and
qemu_rdma_wait_comp_channel(). I elected not to investigate how
callers handle the error, i.e. precise impact is not known.
Clean this up by dropping the error reporting from qemu_rdma_poll(),
qemu_rdma_wait_comp_channel(), and qemu_rdma_block_for_wrid(). I
believe the callers' error reports suffice. If they don't, we need to
convert to Error instead.
Bonus: resolves a FIXME about problematic use of errno.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20230928132019.
2544702-50-armbru@redhat.com>
Markus Armbruster [Thu, 28 Sep 2023 13:20:14 +0000 (15:20 +0200)]
migration/rdma: Don't report received completion events as error
When qemu_rdma_wait_comp_channel() receives an event from the
completion channel, it reports an error "receive cm event while wait
comp channel,cm event is T", where T is the numeric event type.
However, the function fails only when T is a disconnect or device
removal. Events other than these two are not actually an error, and
reporting them as an error is wrong. If we need to report them to the
user, we should use something else, and what to use depends on why we
need to report them to the user.
For now, report this error only when the function actually fails.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20230928132019.
2544702-49-armbru@redhat.com>
Markus Armbruster [Thu, 28 Sep 2023 13:20:13 +0000 (15:20 +0200)]
migration/rdma: Silence qemu_rdma_reg_control()
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_source_init() and qemu_rdma_accept() violate this principle:
they call error_report() via qemu_rdma_reg_control(). I elected not
to investigate how callers handle the error, i.e. precise impact is
not known.
Clean this up by dropping the error reporting from
qemu_rdma_reg_control(). I believe the callers' error reports
suffice. If they don't, we need to convert to Error instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20230928132019.
2544702-48-armbru@redhat.com>
Markus Armbruster [Thu, 28 Sep 2023 13:20:12 +0000 (15:20 +0200)]
migration/rdma: Silence qemu_rdma_connect()
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_connect() violates this principle: it calls error_report()
and perror(). I elected not to investigate how callers handle the
error, i.e. precise impact is not known.
Clean this up: replace perror() by changing error_setg() to
error_setg_errno(), and drop error_report(). I believe the callers'
error reports suffice then. If they don't, we need to convert to
Error instead.
Bonus: resolves a FIXME about problematic use of errno.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20230928132019.
2544702-47-armbru@redhat.com>
Markus Armbruster [Thu, 28 Sep 2023 13:20:11 +0000 (15:20 +0200)]
migration/rdma: Silence qemu_rdma_resolve_host()
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_resolve_host() violates this principle: it calls
error_report().
Clean this up: drop error_report().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20230928132019.
2544702-46-armbru@redhat.com>
Markus Armbruster [Thu, 28 Sep 2023 13:20:10 +0000 (15:20 +0200)]
migration/rdma: Convert qemu_rdma_alloc_pd_cq() to Error
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_source_init() violates this principle: it calls
error_report() via qemu_rdma_alloc_pd_cq(). I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.
Clean this up by converting qemu_rdma_alloc_pd_cq() to Error.
The conversion loses a piece of advice on one of two failure paths:
Your mlock() limits may be too low. Please check $ ulimit -a # and search for 'ulimit -l' in the output
Not worth retaining.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20230928132019.
2544702-45-armbru@redhat.com>
Markus Armbruster [Thu, 28 Sep 2023 13:20:09 +0000 (15:20 +0200)]
migration/rdma: Convert qemu_rdma_post_recv_control() to Error
Just for symmetry with qemu_rdma_post_send_control(). Error messages
lose detail I consider of no use to users.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20230928132019.
2544702-44-armbru@redhat.com>