OSDN Git Service
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:49:20 +0000 (21:49 -0300)]
V4L/DVB (7616): em28xx-dvb: Properly selects digital mode at the right place
The driver should be switched to digital mode, when trying to access the
frontend or when streaming.
This patch provides the correct code to support this feature.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:48:00 +0000 (21:48 -0300)]
V4L/DVB (7615): em28xx: Provide the proper support for switching between analog/digital
Before this patch, HVR900/HVR950 were incorreclty going back to analog. The
result is that only digital were working.
This patch provides the proper setup for analog/digital and tuner callback.
It also properly resets analog into a sane state at open().
Thanks to Steven Toth <stoth@linuxtv.org> and Michael Krufky <mkrufky@linuxtv.org>
for helping to set the proper parameters to GPO/GPIO em2883 ports.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:46:14 +0000 (21:46 -0300)]
V4L/DVB (7614): em28xx-core: fix some debug printk's that wrongly received KERN_INFO
Those printk's were adding more info to a line that were already being
printed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:44:58 +0000 (21:44 -0300)]
V4L/DVB (7613): em28xx: rename registers
Now, all registers will follow the same convension:
EM28XX_R<reg_number>_<reg_name>
This allows to associate a register with its value, and also with a canonical
name. Also, registers that are specific to a given chip were renamed accordingly,
as EM2800_foo (for 2800 only registers) or EM2880_foo (for registers that started
to appear on em2880).
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:43:38 +0000 (21:43 -0300)]
V4L/DVB (7612): em28xx-cards: use register names for GPIO/GPO
Before this patch, registers 0x04 and 0x08 were referenced by its value. This is
bad, since makes harder for someone to understand what this is doing.
This patch renames those two registers into an appropriate name.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:42:58 +0000 (21:42 -0300)]
V4L/DVB (7611): em28xx: Move registers to a separate file
em28xx.h contains lots of different stuff inside. The better is to break it on
some files.
This patch removes the register names, moving them to a separate file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:42:14 +0000 (21:42 -0300)]
V4L/DVB (7610): em28xx: Select reg wait time based on chip ID
This is more conservative than just removing the msleep() from
em28xx_write_regs_req(), since some old hardware may still need it.
So, it will remove the sleep time only for those chips where this
removal were tested.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Devin Heitmueller [Fri, 18 Apr 2008 00:41:23 +0000 (21:41 -0300)]
V4L/DVB (7609): em28xx-core: speed-up firmware load
em28xx-core.c:
- Remove sleep in i2c message routine which slows down i2c by a factor
10x. Load time for BASE firmware went from 13s to .973s
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Devin Heitmueller [Fri, 18 Apr 2008 00:41:16 +0000 (21:41 -0300)]
V4L/DVB (7608): em28xx-dvb: Some cleanups and fixes
em28xx-dvb.c:
- Remove unneeded xc3028_ctrl structure. The driver automatically preserves
the previous value
tuner-xc2028.c:
- Make the return type for xc2028_get_reg signed, since all of the callers
are looking for "< 0" to detect errors.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Douglas Schilling Landgraf [Fri, 18 Apr 2008 00:41:10 +0000 (21:41 -0300)]
V4L/DVB (7607): CodingStyle fixes
Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:41:00 +0000 (21:41 -0300)]
V4L/DVB (7606): em28xx-dvb: Program GPO as well
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:40:53 +0000 (21:40 -0300)]
V4L/DVB (7605): tuner-xc3028: Avoids too much firmware reloads
xc3028_sleep function is being used with a different meaning. This
should be called only before doing S1/S3 sleep.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:40:45 +0000 (21:40 -0300)]
V4L/DVB (7604): em28xx-dvb: Fix analog mode
The analog entries are wrong. Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Aidan Thornton [Fri, 18 Apr 2008 00:40:36 +0000 (21:40 -0300)]
V4L/DVB (7603): em28xx-dvb: don't use videobuf-dvb
Modifies em28xx-dvb not to use videobuf-dvb, but instead to include the code
for registering dvb devices locally and use the URB management code in the
em28xx driver directly. DVB data streaming should now work.
Signed-off-by: Aidan Thornton <makosoft@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Aidan Thornton [Fri, 18 Apr 2008 00:40:16 +0000 (21:40 -0300)]
V4L/DVB (7602): em28xx: generalise URB setup code
Move the URB setup and management code to em28xx-core.c and generalise
it slighlty so that the DVB code can use it.
Signed-off-by: Aidan Thornton <makosoft@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Aidan Thornton [Fri, 18 Apr 2008 00:40:03 +0000 (21:40 -0300)]
V4L/DVB (7601): em28xx-dvb: add support for the HVR-900
Adds the correct GPIOs and demod attach code for the HVR-900
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:38:53 +0000 (21:38 -0300)]
V4L/DVB (7600): em28xx: Sets frequency when changing to analog mode
This will make tuner-xc2028 to change to analog, if needed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:38:38 +0000 (21:38 -0300)]
V4L/DVB (7599): em28xx-dvb: videobuf callbacks are waiting for em28xx_fh
Thanks to Devin Heitmueller <devin.heitmueller@gmail.com> for pointing
this issue.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Devin Heitmueller [Fri, 18 Apr 2008 00:38:27 +0000 (21:38 -0300)]
V4L/DVB (7598): em28xx: several fixes on gpio programming
em28xx-cards.c:
- Fix reversed val/rst values in both analog_gpio and digital_gpio
vectors
- Fix crash that would was occurring during every analog startup
while looping over gpio_ctl
- Remove what appears to be a redundant setting of gpio_ctl->val
- Don't use OREN538 demodulation for the HVR-950 (prevents ATSC
scanning from working)
em28xx-dvb.c:
- Tuner should be in digital mode when issuing the reset
- Add copyright
- Change struct definition (corresponds to fix in em28xx-cards.c for
gpio_ctl looping)
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:37:53 +0000 (21:37 -0300)]
V4L/DVB (7597): em28xx: share the same xc3028 setup for analog and digital modes
Thanks to Devin Heitmueller <devin.heitmueller@gmail.com> and Aidan
Thornton" <makosoft@googlemail.com> for pointing some errors with the
previous scenario.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:37:40 +0000 (21:37 -0300)]
V4L/DVB (7596): em28xx-dvb: Add support for HVR950
This patch adds DVB support for Hauppauge HVR950.
Thanks to Michael Krufky <mkrufky@linuxtv.org> for getting those values.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:37:31 +0000 (21:37 -0300)]
V4L/DVB (7595): Improve generic support for setting gpio values
em28xx based devices with xc3028 may require some specific gpio values.
This patch adds a generic handling for such values.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:37:18 +0000 (21:37 -0300)]
V4L/DVB (7594): em28xx: Fix Kconfig
Some devices have msp3400 audio decoder chip. Selects it, if em28xx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:36:41 +0000 (21:36 -0300)]
V4L/DVB (7593): em28xx: add a module to handle dvb
This patch adds em28xx-dvb. This driver is highly based on cx88-dvb and
saa7134-dvb.
This code currently loads and unloads successfully. However, some
changes are needed to properly support the mpeg streams and to setup
em28xx to work on DVB mode.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Julia Lawall [Wed, 16 Apr 2008 19:13:15 +0000 (16:13 -0300)]
V4L/DVB (7591): drivers/media/video: use time_before, time_before_eq, etc
The functions time_before, time_before_eq, time_after, and time_after_eq
are more robust for comparing jiffies against other values.
A simplified version of the semantic patch making this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@ change_compare_np @
expression E;
@@
(
- jiffies <= E
+ time_before_eq(jiffies,E)
|
- jiffies >= E
+ time_after_eq(jiffies,E)
|
- jiffies < E
+ time_before(jiffies,E)
|
- jiffies > E
+ time_after(jiffies,E)
)
@ include depends on change_compare_np @
@@
@ no_include depends on !include && change_compare_np @
@@
#include <linux/...>
+ #include <linux/jiffies.h>
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Ivan Bobyr [Wed, 16 Apr 2008 19:01:55 +0000 (16:01 -0300)]
V4L/DVB (7590): ir-common: Adds 3 missing IR keys for FlyVIdeo2000
The patch extends the default keymap of FlyVIdeo2000 IR remote control so that
this remote may also serve movie & music players in a better way.
I bought a SAA7130 TV tuner with a remote control having 3 additional button
as the default layout, exactly as:
1) labeled "<<<" : key code 0x19, may be used as "backward"in MPlayer,XMMS etc
2) labeled ">>>" : key code 0x1f, may be used as "forward"...
3) not labeled : key code 0x0a, may be used as "pause"...
Once have added these code definitions to the kernel, me got all these
operations available for viewing movies & listening music.
Signed-off-by : Ivan Bobyr <brefi@yandex.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
David Hilvert [Wed, 16 Apr 2008 07:27:09 +0000 (04:27 -0300)]
V4L/DVB (7589): ibmcam: improve support for the IBM PC Camera Pro
This patch modifies Dmitri's original ibmcam driver for Linux to improve
support for the IBM PC Camera Pro. It may also offer improved support for
other models classified by the driver as 'Model 3', such as the IBM PC Camera
Pro Max.
See http://auricle.dyndns.org/xvp610/
Signed-off-by: David Hilvert <dhilvert@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Tue, 15 Apr 2008 21:11:50 +0000 (18:11 -0300)]
V4L/DVB (7584): Fix build that occurs when CONFIG_VIDEO_PMS=y and VIDEO_V4L2_COMMON=m
This patch removes zoran checks for VIDEO_V4L2, since this API is always
present, when V4L is selected.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Alexey Dobriyan [Fri, 11 Apr 2008 00:34:39 +0000 (21:34 -0300)]
V4L/DVB (7582): proc: switch /proc/driver/radio-typhoon to seq_file interface
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Alexey Dobriyan [Sun, 13 Apr 2008 11:48:43 +0000 (08:48 -0300)]
V4L/DVB (7580): Fix concurrent read from /proc/videocodecs
Observation one: ->write_proc and ->data assignments aren't needed. Removed.
Observation two: codecs lists are unprotected. Patch doesn't fix this.
Observation three:
/proc/videocodecs printout is done to temporary _global_ buffer which
is freed in between. Consequently, two users hitting this file can
screwup each other.
Steps to reproduce:
modprobe videocodec
while true; do cat /proc/videocodecs &>/dev/null; done &
while true; do cat /proc/videocodecs &>/dev/null; done &
The fix is switching to seq_files, this removes code, especially some
line-length "logic".
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Robert Fitzsimons [Thu, 10 Apr 2008 12:40:31 +0000 (09:40 -0300)]
V4L/DVB (7579): bttv: Fix memory leak in radio_release
Fix the leak of the bttv_fh structure allocated in radio_open which
was introduced by commit
5cd3955cb8adfc1edf481e9e1cb2289db50ccacb.
Signed-off-by: Robert Fitzsimons <robfitz@273k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Tue, 22 Apr 2008 17:47:03 +0000 (14:47 -0300)]
V4L/DVB (7575a): Revert changeset
4c3b01f71181a52ab7735a7c52b1aa2232826075
Due to the patch order change, pvrusb2 were broken. So, changeset
4c3b01f71181a52ab7735a7c52b1aa2232826075 were applied at mainstream to fix.
After the pvrusb2 changes, this patch is no longer required and should be
reverted.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Patrick Boettcher [Sun, 13 Apr 2008 18:49:22 +0000 (15:49 -0300)]
V4L/DVB (7569): Added support for SkyStar2 rev2.7 and ITD1000 DVB-S tuner
This patches adds support for the SkyStar2 rev2.7 with the PN1010/ITD1000 Frontend.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Patrick Boettcher [Sun, 30 Mar 2008 00:28:07 +0000 (21:28 -0300)]
V4L/DVB (7471): SkyStar2: preparing support for the rev2.8
Support is prepared, but the CX24113-driver .c-file is missing. After sorting out the NDA problems, the file will be there immediatly.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Matthias Schwarzott [Sat, 12 Apr 2008 18:04:50 +0000 (15:04 -0300)]
V4L/DVB (7575): mt312: add attach-time setting to invert lnb-voltage
Add a setting to config struct for inversion of lnb-voltage.
Needed for support of Avermedia A700 cards.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Matthias Schwarzott [Sat, 12 Apr 2008 18:04:49 +0000 (15:04 -0300)]
V4L/DVB (7574): mt312: Add support for zl10313 demod
Add zl10313 support to mt312 driver.
zl10313 uses 10.111MHz xtal.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Matthias Schwarzott [Sat, 12 Apr 2008 18:04:48 +0000 (15:04 -0300)]
V4L/DVB (7573): mt312: Supports different xtal frequencies
Do not hardcode xtal frequency but allow different values
for future zl10313 support.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Matthias Schwarzott [Sat, 12 Apr 2008 18:04:47 +0000 (15:04 -0300)]
V4L/DVB (7572): mt312: Fix diseqc
Correct the frequency of the emitted diseqc signal to 22kHz.
Adds sleep(100) to wait for message to be transmitted.
For now the only user of mt312 is b2c2-flexcop, and it
does overwrite all diseqc related functions with own code.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Matthias Schwarzott [Sat, 12 Apr 2008 18:04:46 +0000 (15:04 -0300)]
V4L/DVB (7571): mt312: Cleanup buffer variables of read/write functions
Change type of buffer variables from void* to u8* to save some casts.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Patrick Boettcher [Sun, 13 Apr 2008 18:47:53 +0000 (15:47 -0300)]
V4L/DVB (7568): Support for DVB-S demod PN1010 (clone of S5H1420) added
This device is a clone of the PN1010 used by SkyStar2 rev2.7 .
This patch adds support for the flexcop-device and makes the driver look a little bit nicer.
It needs to be checked whether the driver is still ok for the budget-cards.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 13 Apr 2008 18:11:08 +0000 (15:11 -0300)]
V4L/DVB (7567): em28xx: Some cleanups
Removes some fields from data structs.
There are some fields that are just caching some calculus for buffer
size. The calculus were moved to the places it were needed and the now
unused fields were removed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 13 Apr 2008 18:10:00 +0000 (15:10 -0300)]
V4L/DVB (7566): videobuf-dvb: allow its usage with videobuf-vmalloc
videobuf-dvb were still using a function that were videobuf-dma-sg
dependent. This patch creates a generic handler for this function. This
way, videobuf-dvb can now work with all videobuf implementations.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Aidan Thornton [Sun, 13 Apr 2008 18:09:36 +0000 (15:09 -0300)]
V4L/DVB (7565): em28xx: fix buffer underrun handling
This patch fixes three related issues and a fourth trivial one:
- Use buffers even if no-one's currently waiting for them (fixes
underrun issues);
- Don't return incomplete/mangled frames at the start of streaming and
in the case of buffer underruns;
- Fix an issue which could cause the driver to write to a buffer that's
been freed after videobuf_queue_cancel is called (exposed by the
previous two fixes - for some reason, ignoring buffers that weren't
being waited on worked around the issue);
- Fix a bug which could cause only one field to be filled in the first
buffer (or first few buffers) after streaming is started.
Signed-off-by: Aidan Thornton <makosoft@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 13 Apr 2008 18:09:14 +0000 (15:09 -0300)]
V4L/DVB (7564): em28xx: Some fixes to display logic
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 13 Apr 2008 18:08:55 +0000 (15:08 -0300)]
V4L/DVB (7563): em28xx: Add missing checks
There are some cases where nobody is waiting for a buffer. Due to the
lack of check, if you try to abort the userspace app, machine were
hanging, since IRQ were trying to use a buffer that were disallocated.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Brandon Philips [Fri, 28 Mar 2008 17:18:33 +0000 (10:18 -0700)]
V4L/DVB (7562): videobuf: Require spinlocks for all videobuf users
A spinlock is necessary for queue_cancel to work with every driver in the tree.
Otherwise a race exists between IRQ handlers removing buffers from the queue
and queue_cancel invalidating the queue.
Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 13 Apr 2008 18:07:56 +0000 (15:07 -0300)]
V4L/DVB (7561): videobuf-vmalloc: stop streaming before unmap
Before the patch, there were a risk of freeing and unmapping userspace memory,
while there were pending requests.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 13 Apr 2008 18:07:16 +0000 (15:07 -0300)]
V4L/DVB (7560): videodev: Some printk fixes
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 13 Apr 2008 18:06:52 +0000 (15:06 -0300)]
V4L/DVB (7559): em28xx: Fills the entire buffer, before getting another one
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 13 Apr 2008 18:06:24 +0000 (15:06 -0300)]
V4L/DVB (7558): videobuf: Improve command output for debug purposes
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 13 Apr 2008 18:05:47 +0000 (15:05 -0300)]
V4L/DVB (7557): em28xx: honour video_debug modprobe parameter
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Aidan Thornton [Sun, 13 Apr 2008 18:02:24 +0000 (15:02 -0300)]
V4L/DVB (7556): em28xx: fix locking on vidioc_s_fmt_cap
Currently, vidioc_s_fmt_cap is allowed even if streaming is running on some
other fh. This is likely to cause issues.
Block use of vidioc_s_fmt_cap if someone else has claimed access to the device.
Signed-off-by: Aidan Thornton <makosoft@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 13 Apr 2008 18:01:12 +0000 (15:01 -0300)]
V4L/DVB (7555): em28xx: remove timeout
It seems that we don't need a timeout for em28xx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 13 Apr 2008 17:59:29 +0000 (14:59 -0300)]
V4L/DVB (7554): videobuf-dma-sg: Remove unused flag
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 13 Apr 2008 17:58:43 +0000 (14:58 -0300)]
V4L/DVB (7553): videobuf-vmalloc: fix STREAMOFF/STREAMON
There were a small bug on videobuf-vmalloc that were preventing STREAMOFF to
work. The issue is that vmalloc'ed mmaped memory should only be freed after
being sure that there aren't any mmap usage. Otherwise, the memory remap will
stop working, and the userspace won't receive any frames.
This bug were affecting some userspace applications, like tvtime.
After this patch, tvtime started to work again with the drivers that use
videobuf-vmalloc.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 13 Apr 2008 17:58:21 +0000 (14:58 -0300)]
V4L/DVB (7552): videbuf-vmalloc: Corrects mmap code
There were some bugs on videobuf-vmalloc.
Basically, remap were called with a wrong parameter. Due to that, a later remap
were needed, generating the need of some hacks on videobuf-vmalloc and
videobuf-core.
This patch fixes the remap and removes the hacks.
TODO:
- V4L2_MEMORY_USERPTR is not implemented yet. This method should be
properly implemented, in order to work with a few userspace applications.
- The driver also doesn't implement V4L2_MEMORY_OVERLAY. This method is used
only by a few applications, and are becaming obsolete, due to the increment
of cpu performance. So, most apps prefer to retrieve data to an internal
buffer, doing some processing like de-interlacing.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 13 Apr 2008 17:57:44 +0000 (14:57 -0300)]
V4L/DVB (7551): vivi: Add a missing \n
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Brandon Philips [Sun, 13 Apr 2008 17:57:01 +0000 (14:57 -0300)]
V4L/DVB (7550): em28xx: Fix a possible memory leak
I did notice a possible memory leak since iolock is could possibly be
called before a buffer has been freed.
This ensure s_fmt isn't called while the queue is busy thereby avoiding
iolock on already allocated buffers.
Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 13 Apr 2008 17:56:25 +0000 (14:56 -0300)]
V4L/DVB (7549): em28xx: some small cleanups
- Remove dead code;
- Fix a few CodingStyle issues;
- Prints frame number, if debug is enabled.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Aidan Thornton [Sun, 13 Apr 2008 17:56:02 +0000 (14:56 -0300)]
V4L/DVB (7548): Various fixes for the em28xx videobuf code
- Aborting buffer_filled if no-one's waiting on the waitqueue probably isn't
what we want, since just because no-one's waiting for it now doesn't mean they
wouldn't dequeue it in time. (vivi gets away with this, possibly because it
can fill each buffer much faster.)
- The first BUG_ON(lencopy <= 0); really isn't worth causing a kernel panic
over, especially since there are some reasons why it could trigger in normal use.
- The top and botom frames are actually the wrong way around.
Signed-off-by: Aidan Thornton <makosoft@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 13 Apr 2008 17:55:38 +0000 (14:55 -0300)]
V4L/DVB (7547): em28xx: Fix a broken lock
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 13 Apr 2008 17:41:23 +0000 (14:41 -0300)]
V4L/DVB (7545): em28xx: Fix CodingStyle errors and most warnings introduced by videobuf
The last videobuf changes introduced several CodingStyle errors. Fixes all those
errors, as reported by checkpatch.pl
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 13 Apr 2008 17:40:36 +0000 (14:40 -0300)]
V4L/DVB (7544): em28xx: Fix timeout code
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 13 Apr 2008 17:40:10 +0000 (14:40 -0300)]
V4L/DVB (7543): Fix capture start/stop and timeout
Also removes the dead restart_video_queue() function
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 13 Apr 2008 17:39:29 +0000 (14:39 -0300)]
V4L/DVB (7542): em28xx: Fix some warnings
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Aidan Thornton [Sun, 13 Apr 2008 17:38:47 +0000 (14:38 -0300)]
V4L/DVB (7541): em28xx: Some fixes to videobuf
It fixes a couple of minor bugs, comments out a bogus BUG_ON, sets fh->type
correctly, uses dev->width and dev->height for now, and adds a missing spinlock
init (nasty - caused a system lockup). It also adds some debug code which
probably isn't all that useful. I haven't tested this version of the patch yet,
though, so I'm not sure what you can expect if you try it.
Signed-off-by: Aidan Thornton <makosoft@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 13 Apr 2008 17:37:52 +0000 (14:37 -0300)]
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Janne Grunau [Wed, 9 Apr 2008 22:13:13 +0000 (19:13 -0300)]
V4L/DVB (7538): Adds selectable adapter numbers as per module option
The adapter_nr module options can be used to allocate static adapter
numbers on a driver level. It avoids problems with changing DVB apapter
numbers after warm/cold boot or device unplugging and repluging.
Each driver holds DVB_MAX_ADAPTER long array of the preferred order of
adapter numbers.
options dvb-usb-dib0700 adapter_nr=7,6,5,4,3,2,1,0 would result in a
reversed allocation of adapter numbers.
With adapter_nr=2,5 it tries first to get adapter number 2 and 5. If
both are already in use it will allocate the lowest free adapter number.
Signed-off-by: Janne Grunau <janne-dvb@grunau.be>
Acked-by: Hermann Pitton <hermann.pitton@arcor.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 11 Apr 2008 14:29:44 +0000 (11:29 -0300)]
V4L/DVB (7537): cx88/saa7134: Fix: avoid OOPS on module unload
If frontend is not attached, both cx88-dvb and saa7134-dvb don't
register DVB. However, dvb unregister were inconditionally called.
Due to that, an OOPS is generated.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hans Verkuil [Wed, 9 Apr 2008 09:26:17 +0000 (06:26 -0300)]
V4L/DVB (7535): saa717x: add new audio/video decoder i2c driver
Added the last remaining out-of-tree kernel driver from the ivtv project.
The saa717x is used in several Japanese cards and a Russian card. The
driver is not complete in that only NTSC is supported and no PAL/SECAM.
Hopefully this will be added in the future.
Signed-off-by: Takahiro Adachi <tadachi@tadachi-net.com>
Signed-off-by: Kyuma Ohta <whatisthis@jcom.home.ne.jp>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hans Verkuil [Mon, 7 Apr 2008 11:32:14 +0000 (08:32 -0300)]
V4L/DVB (7534): ivtv: the upd* modules have to be probed to properly autodetect some cards
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Oliver Endriss [Wed, 9 Apr 2008 20:49:55 +0000 (17:49 -0300)]
V4L/DVB (7532): budget: Add support for Fujitsu Siemens DVB-T Activy Budget
Implement support for Fujitsu Siemens DVB-T Activy Budget, sub-system id 0x1131:0x5f61.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Christoph Pfister [Wed, 9 Apr 2008 20:37:36 +0000 (17:37 -0300)]
V4L/DVB (7531): budget-av: Fix CI interface on (some) KNC1 DVBS cards
Quoting the commit introducing reinitialise_demod (3984 / by adq):
"These cards [KNC1 DVBT and DVBC] need special handling for CI - reinitialising the frontend
device when the CI module is reset."
Apparently my 1894:0010 also needs that fix, because once you initialise CI/CAM you lose lock.
Signed-off-by: Christoph Pfister <pfister@linuxtv.org>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Christoph Pfister [Wed, 9 Apr 2008 20:34:09 +0000 (17:34 -0300)]
V4L/DVB (7530): budget-av: Fix support for certain cams
The current ci implementation doesn't accept 0xff when reading data bytes (address == 0),
thus breaks cams which report a buffer size of 0x--ff like my orion one.
Remove the 0xff check altogether, because validation is really the job of a higher layer.
Signed-off-by: Christoph Pfister <pfister@linuxtv.org>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Harvey Harrison [Wed, 9 Apr 2008 02:20:00 +0000 (23:20 -0300)]
V4L/DVB (7529): media/video/zc0301 replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Harvey Harrison [Wed, 9 Apr 2008 02:20:00 +0000 (23:20 -0300)]
V4L/DVB (7528): media/video/usbvideo replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Harvey Harrison [Wed, 9 Apr 2008 02:20:00 +0000 (23:20 -0300)]
V4L/DVB (7527): media/video/sn9c102 replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Harvey Harrison [Wed, 9 Apr 2008 02:20:00 +0000 (23:20 -0300)]
V4L/DVB (7526): media/video/saa7134 replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Harvey Harrison [Wed, 9 Apr 2008 02:20:00 +0000 (23:20 -0300)]
V4L/DVB (7525): media/video/pwc replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Harvey Harrison [Wed, 9 Apr 2008 02:20:00 +0000 (23:20 -0300)]
V4L/DVB (7524): media/video/ovcamchip replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Harvey Harrison [Wed, 9 Apr 2008 02:20:00 +0000 (23:20 -0300)]
V4L/DVB (7523): media/video/et61x251 replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Harvey Harrison [Wed, 9 Apr 2008 02:20:00 +0000 (23:20 -0300)]
V4L/DVB (7522): media/video/em28xx replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Harvey Harrison [Wed, 9 Apr 2008 02:20:00 +0000 (23:20 -0300)]
V4L/DVB (7521): media/video/cx88 replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Harvey Harrison [Wed, 9 Apr 2008 02:20:00 +0000 (23:20 -0300)]
V4L/DVB (7520): media/video/cx23885 replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Harvey Harrison [Wed, 9 Apr 2008 02:20:00 +0000 (23:20 -0300)]
V4L/DVB (7519): media/video/cpia2 replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Harvey Harrison [Wed, 9 Apr 2008 02:20:00 +0000 (23:20 -0300)]
V4L/DVB (7518): media/video/ replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Harvey Harrison [Wed, 9 Apr 2008 02:20:00 +0000 (23:20 -0300)]
V4L/DVB (7517): media/dvb/ttusb-dec replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Harvey Harrison [Wed, 9 Apr 2008 02:20:00 +0000 (23:20 -0300)]
V4L/DVB (7516): media/dvb/ttusb-budget replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Harvey Harrison [Wed, 9 Apr 2008 02:20:00 +0000 (23:20 -0300)]
V4L/DVB (7515): media/dvb/ttpci replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Harvey Harrison [Wed, 9 Apr 2008 02:20:00 +0000 (23:20 -0300)]
V4L/DVB (7514): media/dvb/frontends replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Harvey Harrison [Wed, 9 Apr 2008 02:20:00 +0000 (23:20 -0300)]
V4L/DVB (7513): media/dvb/dvb-usb replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Harvey Harrison [Wed, 9 Apr 2008 02:20:00 +0000 (23:20 -0300)]
V4L/DVB (7512): media/dvb/dvb-core replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Harvey Harrison [Wed, 9 Apr 2008 02:20:00 +0000 (23:20 -0300)]
V4L/DVB (7511): media/dvb/cinergyT2 replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Harvey Harrison [Wed, 9 Apr 2008 02:20:00 +0000 (23:20 -0300)]
V4L/DVB (7510): media/dvb/bt8xx replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Harvey Harrison [Wed, 9 Apr 2008 02:20:00 +0000 (23:20 -0300)]
V4L/DVB (7509): media/dvb/b2c2 replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Harvey Harrison [Wed, 9 Apr 2008 02:20:00 +0000 (23:20 -0300)]
V4L/DVB (7508): media/common/ replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Matthias Schwarzott [Wed, 9 Apr 2008 00:45:08 +0000 (21:45 -0300)]
V4L/DVB (7507): saa7134: add analog support for Avermedia A700 cards
Add support for composite and s-video inputs on
Avermedia DVB-S Pro and DVB-S Hybrid+FM cards
(both labled A700) to the saa7134 driver.
XC2028 support for Hybrid+FM is still missing.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Reviewed-by: Hermann Pitton <hermann.pitton@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Dâniel Fraga [Tue, 8 Apr 2008 22:56:44 +0000 (19:56 -0300)]
V4L/DVB (7506): Powercolor Real Angel 330 (remote control support)
The attached patch adds complete remote control support for Powercolor Real
Angel 330.
Signed-off-by: Daniel Fraga <fragabr@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Dâniel Fraga [Tue, 8 Apr 2008 22:54:49 +0000 (19:54 -0300)]
V4L/DVB (7505): Powercolor Real Angel 330 (fixes gpio references)
The attached patch fixes gpio references for Powercolor Real Angel 330.
Signed-off-by: Daniel Fraga <fragabr@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Thierry MERLE [Sat, 5 Apr 2008 00:00:57 +0000 (21:00 -0300)]
V4L/DVB (7503): usbvision: rename __PRETTY_FUNCTION__ occurrences
__PRETTY_FUNCTION__ has no sense in C lang context. Rename it as __func__
Signed-off-by: Thierry MERLE <thierry.merle@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>