OSDN Git Service
Pavlin Radoslavov [Fri, 3 Feb 2017 05:43:55 +0000 (05:43 +0000)]
Fix a memory leak in the osi allocation tracker am:
1aa40037fd
am:
41a7d7f0dd
Change-Id: I50f8a9b75d9eeb7e7b0caa870db1a3d74f2e4edc
Pavlin Radoslavov [Fri, 3 Feb 2017 05:40:55 +0000 (05:40 +0000)]
Fix a memory leak in the osi allocation tracker
am:
1aa40037fd
Change-Id: Ia2163e96693c890005c88ce79726710f378116c7
Pavlin Radoslavov [Fri, 3 Feb 2017 03:47:16 +0000 (19:47 -0800)]
Fix a memory leak in the osi allocation tracker
Add a missing free(allocation) inside allocation_tracker_notify_free()
when freeing a memory buffer.
Prior to switching the allocation tracker to use C++ unordered_map,
the "allocation" bin was kept within (and reused) by the older hash_map
mechanism. However, after the switch to the C++ unordered_map this
is no longer the case, hence the memory leak.
Test: watch -n 1 "adb shell dumpsys meminfo -d BT-PID | grep Heap"
Bug:
34785845
Change-Id: I737c901a6452d29d18fd8b847e7d5ea10c5ff485
Venkata Ramana Rao [Fri, 3 Feb 2017 02:20:13 +0000 (02:20 +0000)]
Merge "Use local CCB variable in loop to check GAP CCB pool" am:
064e8d1273
am:
e9840b1476
Change-Id: Iffb41964e9828c6586216a60ab64402d11406cc9
Venkata Ramana Rao [Fri, 3 Feb 2017 02:17:12 +0000 (02:17 +0000)]
Merge "Use local CCB variable in loop to check GAP CCB pool"
am:
064e8d1273
Change-Id: Ifac39dd2cb84ea065bed2e254aef40bd52f2ab81
Treehugger Robot [Fri, 3 Feb 2017 02:12:31 +0000 (02:12 +0000)]
Merge "Use local CCB variable in loop to check GAP CCB pool"
Manu Viswanadhan [Thu, 2 Feb 2017 23:59:30 +0000 (23:59 +0000)]
Initializing the SDP event message pointer before sending am:
65cca8f2cc
am:
b722434e5a
Change-Id: Ib963b4f53925e9d39f8131a29210b25e93e7f99e
Manu Viswanadhan [Thu, 2 Feb 2017 23:57:01 +0000 (23:57 +0000)]
Initializing the SDP event message pointer before sending
am:
65cca8f2cc
Change-Id: Id9a32b5f07e3d8bbe175d99acf4127a2612a4de2
Venkata Ramana Rao [Wed, 15 Jun 2016 09:57:12 +0000 (15:27 +0530)]
Use local CCB variable in loop to check GAP CCB pool
CCBs are not being properly cleared due to attempting to clear the wrong
CCB. This is fixed by using a local CCB variable in order to preserve the
CCB being freed.
Test: Send multiple files over OPP
Change-Id: I06a8f237047ffb212118b4239e9856fe5c89acb1
Manu Viswanadhan [Tue, 7 Jun 2016 10:51:18 +0000 (16:21 +0530)]
Initializing the SDP event message pointer before sending
Use case: Crash while copying SDP results in case of SDP
ServiceSearchAttributeRequest failure
Steps : Repeated connection-disconnection with multiple devices
Failure: Crash while copying SDP results
Root cause: In case of SDP_ServiceSearchAttributeRequest failure,
garbage value sent for discovery result structure due to improper
initialization
Fix: Initialize the discovery result structure to zero before
sending
Test: code compilation.
Change-Id: I46d92d6262bae3b5def5401270465a3a06468c1a
Myles Watson [Thu, 2 Feb 2017 18:47:30 +0000 (18:47 +0000)]
test_vendor: Test fixes for AsyncManager am:
e36d707b00
am:
581cef898c
Change-Id: Id8bf075a9a253f3e5c59aa7784e7dfe9ffebb6eb
Myles Watson [Thu, 2 Feb 2017 18:20:36 +0000 (18:20 +0000)]
test_vendor: Test fixes for AsyncManager
am:
e36d707b00
Change-Id: I33f04f7c75881beee1969d079e757565c5ed0420
Andre Eisenbach [Thu, 2 Feb 2017 18:16:22 +0000 (18:16 +0000)]
Merge changes Ie172ca37,Idf714e51 am:
4bfa6b5205
am:
d90f892495
Change-Id: I5d4b173bce5e72a445c2519fe4b19f5a2aacc7b2
Myles Watson [Thu, 2 Feb 2017 18:16:20 +0000 (18:16 +0000)]
Remove LPM code from the stack am:
d56ef46502
am:
8a1ad734cd
Change-Id: I2c838269ae72b41a8996d7f2e94bf8ca1fbe7eee
Myles Watson [Thu, 2 Feb 2017 18:16:17 +0000 (18:16 +0000)]
btif: Remove platform-specific address logic am:
1c7a152a96
am:
1e94e20ac1
Change-Id: I5cf1d85b7ed2a6c6297a9c7b6cb0a220d22f2fd2
Andre Eisenbach [Thu, 2 Feb 2017 18:16:05 +0000 (18:16 +0000)]
Merge "Initial HIDL conversion" am:
8a8ed27f87
am:
3b3b02798c
Change-Id: I3cf384571c95d55415b6df1a066886d3fb71234f
Andre Eisenbach [Thu, 2 Feb 2017 18:09:32 +0000 (18:09 +0000)]
Merge changes Ie172ca37,Idf714e51
am:
4bfa6b5205
Change-Id: I513824b35ee04268d8b3ec565432b8bb1cb3c736
Myles Watson [Thu, 2 Feb 2017 18:09:31 +0000 (18:09 +0000)]
Remove LPM code from the stack
am:
d56ef46502
Change-Id: I4a3d95d0ed13dff933694adffed018c19e030c5c
Myles Watson [Thu, 2 Feb 2017 18:09:25 +0000 (18:09 +0000)]
btif: Remove platform-specific address logic
am:
1c7a152a96
Change-Id: Ifd695e65d43f5e10d224f17dbabc0eafb3efdc03
Andre Eisenbach [Thu, 2 Feb 2017 18:09:09 +0000 (18:09 +0000)]
Merge "Initial HIDL conversion"
am:
8a8ed27f87
Change-Id: Id6d8440432084b95a1bf0f430b3cb73379ae348d
Myles Watson [Thu, 26 Jan 2017 23:09:38 +0000 (15:09 -0800)]
test_vendor: Test fixes for AsyncManager
Test: unit tests pass
Change-Id: I5c3f9f4a1fa86e97fa9e6cc26160fd1e3e854925
Andre Eisenbach [Thu, 2 Feb 2017 18:00:58 +0000 (18:00 +0000)]
Merge changes Ie172ca37,Idf714e51
* changes:
Remove LPM code from the stack
btif: Remove platform-specific address logic
Andre Eisenbach [Thu, 2 Feb 2017 18:00:29 +0000 (18:00 +0000)]
Merge "Initial HIDL conversion"
Ajay Kumar [Thu, 2 Feb 2017 01:59:34 +0000 (01:59 +0000)]
Handled invalid MTU Size in L2cap Process Commands am:
633a5bc320
am:
7890228ae8
Change-Id: Ib65285ffcffb2247c54d866154c40592038f2718
Ajay Kumar [Thu, 2 Feb 2017 01:57:05 +0000 (01:57 +0000)]
Handled invalid MTU Size in L2cap Process Commands
am:
633a5bc320
Change-Id: I8d6b1d76cb8ff644fbb9cbfff987e3f80bb04522
Myles Watson [Mon, 12 Sep 2016 21:39:58 +0000 (14:39 -0700)]
Remove LPM code from the stack
Power management is handled in hardware/interfaces/bluetooth/.
Test: mma -j32
Change-Id: Ie172ca37059768a2cfa0d4b84f34b54624b1fa49
Myles Watson [Wed, 21 Dec 2016 23:27:01 +0000 (15:27 -0800)]
btif: Remove platform-specific address logic
This functionality has moved to hardware/interfaces/bluetooth/
Test: Boot and check the address.
Change-Id: Idf714e514314c10dc1659f024ab4cc8570f292b7
Andre Eisenbach [Fri, 11 Nov 2016 00:11:00 +0000 (16:11 -0800)]
Initial HIDL conversion
Test: Unit tests, VTS test, device sanity
Change-Id: Ia5b2b5fa762d240c0490666d50ea5c878631fcd1
Ajay Kumar [Wed, 12 Mar 2014 13:59:27 +0000 (19:29 +0530)]
Handled invalid MTU Size in L2cap Process Commands
Use case: Execute the L2CAP test suite on Codenomicon tool
(1)From tool Codenomicon Defensics 11 menu Utilities > Bluetooth Scan,
paired Bluetooth between pc and phone.
(2)From Defensics 11 Settings ,choose paired phone Bluetooth to be
Target Bluetooth device address in Basic configuration.
(3)Run the test case " Security - l2cap ".
(4)When run to the number 28, 29 test case,check the phone. BT turn
off and turn on
Failure: BT crash observed due to invalid MTU packets from test tool
Root cause: L2CAP is not validating packets in L2CAP Process Commands
Fix: Fixed by sending reject CMD for invalid commands from tool
Test: code compilation.
Change-Id: I8c503ab77d8fca3728a84c3457d8115e31ee3a13
Pavlin Radoslavov [Wed, 1 Feb 2017 17:21:00 +0000 (17:21 +0000)]
Add memory allocation statistics to the Bluetooth dumpsys output am:
0b4f3f7efb
am:
86b25af22d
Change-Id: Iac2495dd6a87518e8b745cc5710580253cfb8d6c
Pavlin Radoslavov [Wed, 1 Feb 2017 17:18:30 +0000 (17:18 +0000)]
Add memory allocation statistics to the Bluetooth dumpsys output
am:
0b4f3f7efb
Change-Id: I6a06bb516ba11327e32c5ede504a92ae79ab20ea
Pavlin Radoslavov [Wed, 1 Feb 2017 11:55:33 +0000 (03:55 -0800)]
Add memory allocation statistics to the Bluetooth dumpsys output
The following memory allocation statistics are added to
the "dumpsys bluetooth_manager" output.
Those are tracking the allocations that are using the OSI malloc mechanism:
osi_strdup() / osi_strndup() / osi_malloc() / osi_calloc() / osi_free()
Bluetooth Memory Allocation Statistics:
Total allocated/free/used counts : 4063 / 3323 / 740
Total allocated/free/used octets : 922460 / 607941 / 314519
Test: Running "adb shell dumpsys bluetooth_manager"
Change-Id: Ibe1d28ec3a2acfd87cfaa10e5902ef3b596e64a8
Pavlin Radoslavov [Tue, 31 Jan 2017 19:13:24 +0000 (19:13 +0000)]
Update the A2DP Codec Config API am:
494e53e904
am:
0be63749e6
Change-Id: I4497045f9d9202756a2a26228a0f05c1c4aa1f0c
Pavlin Radoslavov [Tue, 31 Jan 2017 19:08:15 +0000 (19:08 +0000)]
Update the A2DP Codec Config API
am:
494e53e904
Change-Id: I02831600027b777d41dc5c1b67ac844fa03e9118
Pavlin Radoslavov [Thu, 26 Jan 2017 01:00:23 +0000 (17:00 -0800)]
Update the A2DP Codec Config API
Previously, the JNI upcall would contain only the current codec config.
In the new API, the upcall contains:
1. The current codec config
2. The list of codecs containing the local codecs capabilities
3. The list of codecs containing the selectable codecs capabilities.
This list is the intersection of the local codecs capabilities
and the capabilities of the paired device.
Also, updated the codec backend to accomodate the above changes:
* Update all selectable codecs inside bta_av_co_audio_set_codec()
* Changed getCodecConfigAndCapabilities() to return current codec
config, local codecs capabilities, and selectable codecs capabilities.
* Updated each codec to compute and store a copy of the selectable
capabilities, and the local capabilities.
* Updated tA2DP_SBC_CIE to include new field bits_per_sample
(for consistency with the rest of the codecs).
* Replaced usage of codec_priority of 0 with BTAV_A2DP_CODEC_PRIORITY_DEFAULT
* If there is user codec (re)config call, we always send an upcall
to inform the Java layer about the most recent codec info.
Thus, the caller would always know whether the request succeeded or failed.
Test: A2DP streaming with headsets and switching the codecs
Change-Id: Ie7a5cd5c2ab01bb8676032be05bc2ad03baa1e3f
Stephen Li [Fri, 27 Jan 2017 07:37:43 +0000 (07:37 +0000)]
Merge commit '
ca6d7dcbd49356338eaaa88de87885ecaf218c4d' into am:
665bcf8f2d
am:
c28c4325d2
Change-Id: Ib4b641b82598b01ce6f6706929b4e95a120ad359
Andre Eisenbach [Fri, 27 Jan 2017 07:34:22 +0000 (07:34 +0000)]
Merge "Remove HC_BUFFER_HDR_T" am:
a6f6077be8
am:
a993bc5266
Change-Id: Id395ad6449a22f6fad413aec292dfeff86bbcb14
Stephen Li [Fri, 27 Jan 2017 01:22:43 +0000 (01:22 +0000)]
Merge commit '
ca6d7dcbd49356338eaaa88de87885ecaf218c4d' into
am:
665bcf8f2d
Change-Id: I3a3fc2d0cc9f6681178a5877b127ad55f98be9bc
Andre Eisenbach [Fri, 27 Jan 2017 01:22:32 +0000 (01:22 +0000)]
Merge "Remove HC_BUFFER_HDR_T"
am:
a6f6077be8
Change-Id: I72c589c900c83b6adcd229248dc5b8590a73b64b
Stephen Li [Thu, 26 Jan 2017 23:45:27 +0000 (15:45 -0800)]
Merge commit '
ca6d7dcbd49356338eaaa88de87885ecaf218c4d' into
This is because patchset 1 of change 328081 got merged in to the branch
and not patchset 2, despite what gerrit UI says. This is a known error
and is being worked on.
Change-Id: If4f6f3d705e93f03d120c6441e16e9b0afc3d9ca
Treehugger Robot [Thu, 26 Jan 2017 23:22:12 +0000 (23:22 +0000)]
Merge "Remove HC_BUFFER_HDR_T"
Andre Eisenbach [Wed, 25 Jan 2017 17:26:41 +0000 (09:26 -0800)]
Remove HC_BUFFER_HDR_T
Test: compiles
Change-Id: Ia5bf3395bd5a18a27168f05a0a2239a37ddb2c2c
Pavlin Radoslavov [Thu, 26 Jan 2017 19:25:53 +0000 (19:25 +0000)]
Integration of the AAC codec for A2DP source am:
d5f4960b42
am:
2c66cfabaf
Change-Id: Ib6e37d4dace1d3db0b6b170de7b3b2fcc076aef4
Pavlin Radoslavov [Thu, 26 Jan 2017 19:20:31 +0000 (19:20 +0000)]
Integration of the AAC codec for A2DP source
am:
d5f4960b42
Change-Id: I75433922a48fab734ea5d0ee01c93d3a44cde8d8
Pavlin Radoslavov [Wed, 4 Jan 2017 00:53:18 +0000 (16:53 -0800)]
Integration of the AAC codec for A2DP source
Also:
- Implemented data fragmentation inside bta_av_data_path()
that is RTP compatible.
- Do not use the codec_type when composing the RTP payload type
per RFC 3016, Section 4.2. That value doesn't have actual meaning
in the context of the Bluetooth supported codecs, and is ambiguous:
all vendor codecs map to the same value 0xFF.
- Updated support function A2DP_BitsSet() so it works for
up to 64-bit integers.
- Updated a log message inside l2c_data_write() to print
packet length and peer MTU on error.
Test: A2DP streaming to AAC headsets
Bug:
30958229
Change-Id: I1b530f1c5c495b8231fd68bed788d4567096683d
Srinu Jella [Wed, 25 Jan 2017 20:06:46 +0000 (20:06 +0000)]
Merge "Update UUIDs immediately on NVRAM" am:
87cf1322fc
am:
6b46114f5a
Change-Id: Ie8b3c383f711e3a402c531a9a98ee8eb852c6c91
Srinu Jella [Wed, 25 Jan 2017 20:02:15 +0000 (20:02 +0000)]
Merge "Update UUIDs immediately on NVRAM"
am:
87cf1322fc
Change-Id: I7d302edf5c42ceb90f3e1692e243410063218636
Treehugger Robot [Wed, 25 Jan 2017 19:55:59 +0000 (19:55 +0000)]
Merge "Update UUIDs immediately on NVRAM"
Jack He [Wed, 25 Jan 2017 19:33:12 +0000 (19:33 +0000)]
Merge "Corrected default value assignments in Bluetooth A2DP Metrics" am:
df1668926d
am:
f85d231647
Change-Id: Ie42f410cc3c1df184f20b78d84f0a634c374facb
Jack He [Wed, 25 Jan 2017 19:30:42 +0000 (19:30 +0000)]
Merge "Corrected default value assignments in Bluetooth A2DP Metrics"
am:
df1668926d
Change-Id: Ibeca5167e014e7ef51da639bcc12d3b2d89ec9b9
Treehugger Robot [Wed, 25 Jan 2017 19:28:02 +0000 (19:28 +0000)]
Merge "Corrected default value assignments in Bluetooth A2DP Metrics"
Srinu Jella [Mon, 21 Nov 2016 12:56:58 +0000 (18:26 +0530)]
Update UUIDs immediately on NVRAM
As the BTIF config updation have delay in writing items
to the NVRAM, some times there is a chance of not updating
incase of battery removal happens before the actual write onto
NVRAM.
As SDP UUIDs is important data to store, it will update
immediately onto NVRAM.
Test: manual
Change-Id: I6637dc326f3a53211a5bbf988a2dca1020203128
Andre Eisenbach [Wed, 25 Jan 2017 17:26:41 +0000 (09:26 -0800)]
Remove HC_BUFFER_HDR_T
Test: compiles
Change-Id: Ia5bf3395bd5a18a27168f05a0a2239a37ddb2c2c
Ivan Podogov [Wed, 25 Jan 2017 00:14:24 +0000 (00:14 +0000)]
HID: Fix forced disconnection flow. am:
367373ba8b
am:
d6cff48023
Change-Id: I9171655b4cfe05e4395d2381461316bd05824a1e
Ivan Podogov [Wed, 25 Jan 2017 00:12:23 +0000 (00:12 +0000)]
HID: Fix forced disconnection flow.
am:
367373ba8b
Change-Id: Ia72cfb5979735bdb2b091291719ac895331bba7e
Ivan Podogov [Thu, 19 Jan 2017 17:19:37 +0000 (17:19 +0000)]
HID: Fix forced disconnection flow.
In some cases, we end up in a state where we can neither
connect nor forcefully end connection, and will require disabling
the Bluetooth adapter to fix this state.
When a device is taking too long to connect (or out of range),
the user may want to cancel the connection by calling disconnect
method, which will be ignored in any state other than
BTA_HD_CONN_ST. It is a lot better to immediately cease the
connection process at this point, so:
- BTA_HD_API_DISCONNECT_EVT is now not ignored in BTA_HD_IDLE_ST;
- bta_hd_disconnect_act now reports a correct MAC address during
disconnection (it used to send 00:00:00:00:00:00 before);
- HidDevDisconnect now allows to forcefully end the connection,
and does it in exactly the same way we handle the errors.
When L2CAP connection fails, both hidd_l2cif_config_ind and
hidd_l2cif_config_cfm set conn_state to HID_CONN_STATE_UNUSED,
which is immediately overwritten by the hidd_conn_disconnect call
(it will set conn_state to HID_CONN_STATE_DISCONNECTING, because
ctrl_cid != 0 in both cases), thus making any subsequent calls to
connect failing with "already connecting" error. More than that,
all functions send the HID_DHOST_EVT_CLOSE event when failing,
which is, again, ignored in the BTA_HD_IDLE_ST state. So:
- BTA_HD_INT_CLOSE_EVT is now not ignored in BTA_HD_IDLE_ST;
- conn_state is set to HID_CONN_STATE_UNUSED after the call to
hidd_conn_disconnect, but before sending the close event.
Test: Build, run, connect/disconnect multiple times.
Change-Id: I85bb03f760bb9a6fd4c1b944d515232c1be12300
Jack He [Fri, 20 Jan 2017 19:17:44 +0000 (11:17 -0800)]
Corrected default value assignments in Bluetooth A2DP Metrics
* In certain cases btif_a2dp_source_stop_audio_req() could be called before
btif_a2dp_source_start_audio_req() is called, resulting in session_start_us
to be 0. In this case, audio_duration_ms = time_get_os_boottime_us() - 0
will be a very large number that is not the actual audio duration. This
CL marks audio_duration_ms as -1 in the above situation so that we can
differentiate between valid and invalid audio durations
* Set default timer and counter values to 0 when
tx_queue_dequeue_stats.total_updates > 1
* Move update_scheduling_stats for tx_queue_enqueue_stats to
btif_a2dp_source_audio_handle_timer as we intend to capture the time
intervals for enqueue scheduling instead of time intervals between
frame enqueue (i.e. one scheduling event can enqueue multiple frames)
* Use tx_queue_enqueue_stats for metrics instead of *dequeue* since only
enqueue is triggered by timer event
Bug:
33694310
Test: Code compilation, BtFunhausMetricsTest
Change-Id: I10984920afd4d77f07a5ac75736f8dcd69b13af8
(cherry picked from commit
5a9925784a4a34811ae29608b67dee4a580c226b)
Jakub Pawlowski [Mon, 23 Jan 2017 23:45:57 +0000 (23:45 +0000)]
Add advertising handle zero quirk am:
6d75adcc03
am:
11438472ac
Change-Id: Ie2266ac54b28fd507cff9026b45a0e6a1b17aa5e
Jakub Pawlowski [Mon, 23 Jan 2017 23:43:56 +0000 (23:43 +0000)]
Add advertising handle zero quirk
am:
6d75adcc03
Change-Id: I520cd3d1aff332d9eb0ccce13f36dc0aceb2f25e
Jakub Pawlowski [Mon, 23 Jan 2017 22:03:19 +0000 (14:03 -0800)]
Add advertising handle zero quirk
Some controllers are strict about VSC handle mapping, and don't allow
using zero value.
Test: manual test
Change-Id: Ia2df17af16e0e4da375d6e7d5b5f882ced508ce9
IHLHO KIM [Mon, 23 Jan 2017 19:00:55 +0000 (19:00 +0000)]
Fix the GATT server and HOGP disconnect am:
c176ff364e
am:
f83cdcb7fc
Change-Id: If46dcdd664c3a433b0c16acac955acb2c79ffa2a
IHLHO KIM [Mon, 23 Jan 2017 18:56:56 +0000 (18:56 +0000)]
Fix the GATT server and HOGP disconnect
am:
c176ff364e
Change-Id: I13a676f6d9beac6f5cf07960c8b9cfe4fc2a7a68
IHLHO KIM [Fri, 13 Jan 2017 06:27:38 +0000 (06:27 +0000)]
Fix the GATT server and HOGP disconnect
GATT server disconnect and HOGP disconnect are not working after the
following commit:
a62adcab30929566b435891611232566bd69204a.
‘BTA_GATTS_CancelOpen’ makes ‘gatt_update_app_hold_link_status’
return FALSE value. As a result, ‘BTA_GATTS_Close’ cannot disconnect
the link. The sequence has to be changed like GATT client.
And the above mentioned fix removed ‘found’ checking routine in
‘gatt_update_app_hold_link_status’.
It makes two app hold links with same gatt_if when HOGP is connected and
background connection is added. But HOGP disconnect removes only one held
link. So HOGP is never disconnected.
The ‘found’ checking routine has to be rolled back.
Test: manual
Change-Id: Ibea825b5cc844195f0cf4a30cbcca831880c9088
Jakub Pawlowski [Sat, 21 Jan 2017 09:03:38 +0000 (09:03 +0000)]
Fix advertising timeout behaviour. am:
657baed5df
am:
abf317c0a1
Change-Id: I96c1977d4fa186c513a5c55215d59f70d5b21d96
Jakub Pawlowski [Sat, 21 Jan 2017 08:59:37 +0000 (08:59 +0000)]
Fix advertising timeout behaviour.
am:
657baed5df
Change-Id: I026f8798a67438e200f0a1b9c078776d7065e419
Jakub Pawlowski [Fri, 20 Jan 2017 13:33:38 +0000 (05:33 -0800)]
Fix advertising timeout behaviour.
When advertising is enabled with timeout, enable callback was not
called. Also we were not scheduling the disable operation after the
timeout passes. This patch fixes that. It also make sure that the
timeout callback is called on proper thread.
Bug:
34440704
Test: sl4a ConcurrentBleAdvertising:test_timeout
Change-Id: I233c2692c690f55ef6243325640e48b37818c9d5
Kamal Negi [Fri, 20 Jan 2017 23:43:59 +0000 (23:43 +0000)]
Merge "Set alarm's queue to NULL on alarm expired" am:
1ad559cf00
am:
0ff83d9a87
Change-Id: I753305fafe1b675eb5f48ccd701165c2c3118443
Kamal Negi [Fri, 20 Jan 2017 23:40:29 +0000 (23:40 +0000)]
Merge "Set alarm's queue to NULL on alarm expired"
am:
1ad559cf00
Change-Id: Icfe0576b893be813645375f3da234ee7a3fa4455
Treehugger Robot [Fri, 20 Jan 2017 23:36:39 +0000 (23:36 +0000)]
Merge "Set alarm's queue to NULL on alarm expired"
Srinu Jella [Fri, 20 Jan 2017 23:33:30 +0000 (23:33 +0000)]
Merge "Synchronize hl data operations" am:
0d8bb2b099
am:
cac856b821
Change-Id: I48c2c0d1431bf5a8ab1a77d887460d3e3a52a650
Srinu Jella [Fri, 20 Jan 2017 23:29:57 +0000 (23:29 +0000)]
Merge "Synchronize hl data operations"
am:
0d8bb2b099
Change-Id: I65ef2e27332de47e921f15aaca76668cc75f9567
Treehugger Robot [Fri, 20 Jan 2017 23:25:44 +0000 (23:25 +0000)]
Merge "Synchronize hl data operations"
Nagarjuna Kristam [Fri, 20 Jan 2017 21:44:21 +0000 (21:44 +0000)]
Update error check for LE read remote feature event am:
86d5b5658c
am:
623a6d4f63
Change-Id: I209d901733690f8ace8855865370738fd304e9a9
Nagarjuna Kristam [Fri, 20 Jan 2017 21:41:23 +0000 (21:41 +0000)]
Update error check for LE read remote feature event
am:
86d5b5658c
Change-Id: Icdb02974837695995dacb1598772d4b46af66d9b
Nagarjuna Kristam [Tue, 13 Dec 2016 09:00:45 +0000 (14:30 +0530)]
Update error check for LE read remote feature event
When a BLE remote read remote feature complete event is received
initial commands flow is proceeding if error code is not connection
failed to establish (0x3E). Instead, the flow should fail on any
error.
Test: Re-connection stress tests with LE device
Change-Id: I4ab80b6601f5f852fcf8da2911807438584fd3f4
Kamal Negi [Mon, 19 Sep 2016 08:46:56 +0000 (14:16 +0530)]
Set alarm's queue to NULL on alarm expired
Use Case: Repeated BT ON/OFF
Failure: ANR due to race condition between random advertisement
address generation completion(adv_raddr_timer) and BT shutdown.
Steps: SNS Stress testing.
Root Cause: Race condition happens between random advertisement
address generation completion(adv_raddr_timer) and BT shutdown.
Fix: For non-periodic alarms, set alarm's queue to NULL once alarm
expired.
Test: mm -j8
Change-Id: Idf8e2bebdc2ca7621aef06dd5f2075ef2c5fa08c
Satish Kodishala [Fri, 20 Jan 2017 21:26:48 +0000 (21:26 +0000)]
Bluetooth: Handle get RSSI timeout gracefully am:
b0014dae41
am:
8fe142c111
Change-Id: Ib667ace75390ab1c969aac216e3babb58ea82dfa
Satish Kodishala [Fri, 20 Jan 2017 21:25:49 +0000 (21:25 +0000)]
Bluetooth: Handle get RSSI timeout gracefully
am:
b0014dae41
Change-Id: I55f9d891c58b82e12073fe57d1d19bdf64f6019d
Sanket Agarwal [Fri, 20 Jan 2017 21:25:49 +0000 (21:25 +0000)]
BTA HF CLIENT: Unset initial SCO value am:
882760d186
am:
7aec0a91c5
Change-Id: I238b52168be022d5112b70bcff06d2a5381a7c19
Sanket Agarwal [Fri, 20 Jan 2017 21:21:48 +0000 (21:21 +0000)]
BTA HF CLIENT: Unset initial SCO value
am:
882760d186
Change-Id: I1342f805da9d37e542e137bad9eda54bab8287c2
Srinu Jella [Wed, 30 Nov 2016 09:55:12 +0000 (15:25 +0530)]
Synchronize hl data operations
Use Case: BT crash seen while transferring data
using HDP APP to remote health device.
Steps:
1. Pair with HDP device
2. Run HDP APP and transfer data to Remote HDP device.
Failure: BT automatically resets and recovers.
Root Cause: Synchronize BITF HL free buffer as simultaneously
free buffer from BTIF and BTU thread lead to sigabort.
Fix: Validate Tx packet before memcpy as it can be free
from different thread.
Test: mm -j8
Change-Id: I566f62ce02c8e95c9f4b8d7155132e4434657f66
Satish Kodishala [Tue, 20 Dec 2016 05:31:07 +0000 (11:01 +0530)]
Bluetooth: Handle get RSSI timeout gracefully
Usecase:
1. Turn ON BT
2. Pair and connect with Headset
3. Play Music over A2DP
4. Make GetRssi timeout
5. Bt app crashes
Failure:
BT app crashes.
Rootcause:
Calling callback with NULL and in callback handling NULL check with assert.
Fix:
Call the callback with error instead of NULL.
Change-Id: I20a9e504a513697945cd76d218ec12a0ef1e3330
Sanket Agarwal [Fri, 20 Jan 2017 19:06:41 +0000 (11:06 -0800)]
BTA HF CLIENT: Unset initial SCO value
Initialize the block with invalid SCO state so that while allocating the
if condition does not ignore the block. This was causing the stack to
not initiate a SCO connection to the remote (AG role)
Bug: b/
33555377
Test: Check for SCO initialied on audio call
Change-Id: I3f5619c69288483bfa45c2a1adcf22008e353841
Jack He [Fri, 20 Jan 2017 04:02:16 +0000 (04:02 +0000)]
Fix A2DP Metrics Logging Capacity am:
a3f831cc74
am:
1cac42b5da
Change-Id: I85fd2f52849365593106e7f45bdcdb9c493d2f0a
Jack He [Fri, 20 Jan 2017 03:53:20 +0000 (03:53 +0000)]
Fix A2DP Metrics Logging Capacity
am:
a3f831cc74
Change-Id: I6a790aae682f6b8282de219a286f82bdca4503b5
Jack He [Tue, 17 Jan 2017 23:41:30 +0000 (15:41 -0800)]
Fix A2DP Metrics Logging Capacity
* Set the maximum number of wake events logged to 1000
* Stop logging wake log name as it takes too much memory
* Add counters for each of the repeated values in BluetoothLog so that
the true number of events can be determined while oldest event get
dropped
* Log Bluetooth session disconnect reasons using enum instead of string
in order to save memory usage
* Apply other branch changes to bluetooth.proto on system/bt
Bug:
33694310
Test: Code compilation and unit tests
Change-Id: I2cc6f9304725938b63b211d615eb1941eac60edf
(cherry picked from commit
7ab4b59672013eddcb706e288962ab7309a75628)
Myles Watson [Thu, 19 Jan 2017 23:25:43 +0000 (23:25 +0000)]
test_vendor: Remove extra byte in LE Features am:
a72fc53164
am:
e13ce6b773
Change-Id: Ibf2b67f0165db5ff470bbadc7979931caff5b713
Myles Watson [Thu, 19 Jan 2017 23:23:09 +0000 (23:23 +0000)]
test_vendor: Remove extra byte in LE Features
am:
a72fc53164
Change-Id: If703d5f52b0ee55338f0f3c24c5c6cad113fe108
Myles Watson [Thu, 19 Jan 2017 21:13:55 +0000 (13:13 -0800)]
test_vendor: Remove extra byte in LE Features
Bug:
34357009
Test: push test-vendor lib as libbt-vendor.so, Bluetooth starts
Change-Id: Id3a5f85f6b3da5a723dba04527db8b66de0e84a8
Jakub Pawlowski [Thu, 19 Jan 2017 14:53:49 +0000 (14:53 +0000)]
Fix bad UUID comparison when adding GATT service am:
33f424d493
am:
bd6197aae4
Change-Id: I8290d2055f06a869b964840bc205b8b8b89925b6
Jakub Pawlowski [Thu, 19 Jan 2017 14:51:18 +0000 (14:51 +0000)]
Fix bad UUID comparison when adding GATT service
am:
33f424d493
Change-Id: I8552b9aa41c0852672a5ecf63ea39b8a289d27df
Jakub Pawlowski [Thu, 19 Jan 2017 06:58:53 +0000 (22:58 -0800)]
Fix bad UUID comparison when adding GATT service
This patch fixes bad comparison in add_service_impl. Instead of checking
wether service is one of two excluded services, it was excluding all
services.
Test: sl4a GatReadTest
Bug:
34280184
Change-Id: I3195e94b6fafe4d2e3c61fc7bfd7398c2855b78e
Jorge E. Moreira [Thu, 19 Jan 2017 14:32:16 +0000 (14:32 +0000)]
Merge "test_vendor: Make tryStartThread return 0 on success" am:
91b994faa6
am:
0e462b4c9b
Change-Id: If36b548d7b58060d920caef2fea0d13f3fe3e596
Jorge E. Moreira [Thu, 19 Jan 2017 14:30:13 +0000 (14:30 +0000)]
Merge "test_vendor: Make tryStartThread return 0 on success"
am:
91b994faa6
Change-Id: I54671e84b39953a5e38e7b41a5275800de9c06b4
Treehugger Robot [Thu, 19 Jan 2017 14:26:33 +0000 (14:26 +0000)]
Merge "test_vendor: Make tryStartThread return 0 on success"
Jorge E. Moreira [Thu, 19 Jan 2017 00:34:42 +0000 (16:34 -0800)]
test_vendor: Make tryStartThread return 0 on success
Test: Start the test vendor library with no error message
Bug:
34357009
Change-Id: Id2821199ad675e2b95a9f333afa803dcced811a3
Jack He [Thu, 19 Jan 2017 03:40:09 +0000 (03:40 +0000)]
Fix parser for BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR am:
a643b5b0df
am:
4c56d8f849
Change-Id: I5dcd31ca425b25286fb86ca0e48015c4514f3b8d
Jack He [Thu, 19 Jan 2017 03:37:37 +0000 (03:37 +0000)]
Fix parser for BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR
am:
a643b5b0df
Change-Id: I3c4d7ccfcfbcb0faa151776ecd325891d14f38f5
Jack He [Thu, 19 Jan 2017 01:14:08 +0000 (17:14 -0800)]
Fix parser for BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR
* Current parser does not support multi-directory lists, which may cause
a build failure if BoardConfig.mk defines one.
* This CL splits the list of directories using whitespace and adds them
individually to the include list
Bug:
34396100
Test: Code compilation, no user visible effect
Change-Id: I59e901d76d1bc20f50b54941a3007c5521ded214
Jack He [Wed, 18 Jan 2017 22:20:18 +0000 (22:20 +0000)]
Convert build system to soong using Android.bp am:
e2eeff4f7f
am:
bfd636ce15
Change-Id: Id194d1c543cc52f52e93016f3ae37a3207527219