git.osdn.net Git - tomoyo/tomoyo-test1.git/log

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:

- fix nommu assignment build warning

- fix -Wundef preprocessor warning

- reduce __thumb2__ definitions for crypto files that require it

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9287/1: Reduce __thumb2__ definition to crypto files that require it
  ARM: 9284/1: include <asm/pgtable.h> from proc-macros.S to fix -Wundef warnings
  ARM: 9280/1: mm: fix warning on phys_addr_t to void pointer assignment

Merge tag 'linux-kselftest-fixes-6.2-rc6' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:
"A single fix to a amd-pstate test Makefile bug that deletes source
files during make clean run"

* tag 'linux-kselftest-fixes-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: amd-pstate: Don't delete source files via Makefile

Merge tag 'platform-drivers-x86-v6.2-3' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

-  Fix false positive apple_gmux backlight detection on older iGPU only
    MacBook models

-  Various other small fixes and hardware-id additions

* tag 'platform-drivers-x86-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: thinkpad_acpi: Fix profile modes on Intel platforms
  ACPI: video: Fix apple gmux detection
  platform/x86: apple-gmux: Add apple_gmux_detect() helper
  platform/x86: apple-gmux: Move port defines to apple-gmux.h
  platform/x86: hp-wmi: Fix cast to smaller integer type warning
  platform/x86/amd: pmc: Add a module parameter to disable workarounds
  platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN
  platform/x86: asus-wmi: Fix kbd_dock_devid tablet-switch reporting
  platform/x86: gigabyte-wmi: add support for B450M DS3H WIFI-CF
  platform/x86: hp-wmi: Handle Omen Key event
  platform/x86: dell-wmi: Add a keymap for KEY_MUTE in type 0x0010 table

Merge tag 'net-6.2-rc6' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.

  Current release - regressions:

   - sched: sch_taprio: do not schedule in taprio_reset()

  Previous releases - regressions:

   - core: fix UaF in netns ops registration error path

   - ipv4: prevent potential spectre v1 gadgets

   - ipv6: fix reachability confirmation with proxy_ndp

   - netfilter: fix for the set rbtree

   - eth: fec: use page_pool_put_full_page when freeing rx buffers

   - eth: iavf: fix temporary deadlock and failure to set MAC address

  Previous releases - always broken:

   - netlink: prevent potential spectre v1 gadgets

   - netfilter: fixes for SCTP connection tracking

   - mctp: struct sock lifetime fixes

   - eth: ravb: fix possible hang if RIS2_QFF1 happen

   - eth: tg3: resolve deadlock in tg3_reset_task() during EEH

  Misc:

   - Mat stepped out as MPTCP co-maintainer"

* tag 'net-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
  net: mdio-mux-meson-g12a: force internal PHY off on mux switch
  docs: networking: Fix bridge documentation URL
  tsnep: Fix TX queue stop/wake for multiple queues
  net/tg3: resolve deadlock in tg3_reset_task() during EEH
  net: mctp: mark socks as dead on unhash, prevent re-add
  net: mctp: hold key reference when looking up a general key
  net: mctp: move expiry timer delete to unhash
  net: mctp: add an explicit reference from a mctp_sk_key to sock
  net: ravb: Fix possible hang if RIS2_QFF1 happen
  net: ravb: Fix lack of register setting after system resumed for Gen3
  net/x25: Fix to not accept on connected socket
  ice: move devlink port creation/deletion
  sctp: fail if no bound addresses can be used for a given scope
  net/sched: sch_taprio: do not schedule in taprio_reset()
  Revert "Merge branch 'ethtool-mac-merge'"
  netrom: Fix use-after-free of a listening socket.
  netfilter: conntrack: unify established states for SCTP paths
  Revert "netfilter: conntrack: add sctp DATA_SENT state"
  netfilter: conntrack: fix bug in for_each_sctp_chunk
  netfilter: conntrack: fix vtag checks for ABORT/SHUTDOWN_COMPLETE
  ...

treewide: fix up files incorrectly marked executable

I'm not exactly clear on what strange workflow causes people to do it,
but clearly occasionally some files end up being committed as executable
even though they clearly aren't.

This is a reprise of commit 90fda63fa115 ("treewide: fix up files
incorrectly marked executable"), just with a different set of files (but
with the same trivial shell scripting).

So apparently we need to re-do this every five years or so, and Joe
needs to just keep reminding me to do so ;)

Reported-by: Joe Perches <joe@perches.com>
Fixes: 523375c943e5 ("drm/vmwgfx: Port vmwgfx to arm64")
Fixes: 5c439937775d ("ASoC: codecs: add support for ES8326")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

net: mdio-mux-meson-g12a: force internal PHY off on mux switch

Force the internal PHY off then on when switching to the internal path.
This fixes problems where the PHY ID is not properly set.

Fixes: 7090425104db ("net: phy: add amlogic g12a mdio mux support")
Suggested-by: Qi Duan <qi.duan@amlogic.com>
Co-developed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20230124101157.232234-1-jbrunet@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

docs: networking: Fix bridge documentation URL

Current documentation URL [1] is no longer valid.

[1] https://www.linuxfoundation.org/collaborate/workgroups/networking/bridge

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230124145127.189221-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tsnep: Fix TX queue stop/wake for multiple queues

netif_stop_queue() and netif_wake_queue() act on TX queue 0. This is ok
as long as only a single TX queue is supported. But support for multiple
TX queues was introduced with 762031375d5c and I missed to adapt stop
and wake of TX queues.

Use netif_stop_subqueue() and netif_tx_wake_queue() to act on specific
TX queue.

Fixes: 762031375d5c ("tsnep: Support multiple TX/RX queue pairs")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://lore.kernel.org/r/20230124191440.56887-1-gerhard@engleder-embedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/tg3: resolve deadlock in tg3_reset_task() during EEH

During EEH error injection testing, a deadlock was encountered in the tg3
driver when tg3_io_error_detected() was attempting to cancel outstanding
reset tasks:

crash> foreach UN bt
...
PID: 159    TASK: c0000000067c6000  CPU: 8   COMMAND: "eehd"
...
#5 [c00000000681f990] __cancel_work_timer at c00000000019fd18
#6 [c00000000681fa30] tg3_io_error_detected at c00800000295f098 [tg3]
#7 [c00000000681faf0] eeh_report_error at c00000000004e25c
...

PID: 290    TASK: c000000036e5f800  CPU: 6   COMMAND: "kworker/6:1"
...
#4 [c00000003721fbc0] rtnl_lock at c000000000c940d8
#5 [c00000003721fbe0] tg3_reset_task at c008000002969358 [tg3]
#6 [c00000003721fc60] process_one_work at c00000000019e5c4
...

PID: 296    TASK: c000000037a65800  CPU: 21  COMMAND: "kworker/21:1"
...
#4 [c000000037247bc0] rtnl_lock at c000000000c940d8
#5 [c000000037247be0] tg3_reset_task at c008000002969358 [tg3]
#6 [c000000037247c60] process_one_work at c00000000019e5c4
...

PID: 655    TASK: c000000036f49000  CPU: 16  COMMAND: "kworker/16:2"
...:1

#4 [c0000000373ebbc0] rtnl_lock at c000000000c940d8
#5 [c0000000373ebbe0] tg3_reset_task at c008000002969358 [tg3]
#6 [c0000000373ebc60] process_one_work at c00000000019e5c4
...

Code inspection shows that both tg3_io_error_detected() and
tg3_reset_task() attempt to acquire the RTNL lock at the beginning of
their code blocks.  If tg3_reset_task() should happen to execute between
the times when tg3_io_error_deteced() acquires the RTNL lock and
tg3_reset_task_cancel() is called, a deadlock will occur.

Moving tg3_reset_task_cancel() call earlier within the code block, prior
to acquiring RTNL, prevents this from happening, but also exposes another
deadlock issue where tg3_reset_task() may execute AFTER
tg3_io_error_detected() has executed:

crash> foreach UN bt
PID: 159    TASK: c0000000067d2000  CPU: 9   COMMAND: "eehd"
...
#4 [c000000006867a60] rtnl_lock at c000000000c940d8
#5 [c000000006867a80] tg3_io_slot_reset at c0080000026c2ea8 [tg3]
#6 [c000000006867b00] eeh_report_reset at c00000000004de88
...
PID: 363    TASK: c000000037564000  CPU: 6   COMMAND: "kworker/6:1"
...
#3 [c000000036c1bb70] msleep at c000000000259e6c
#4 [c000000036c1bba0] napi_disable at c000000000c6b848
#5 [c000000036c1bbe0] tg3_reset_task at c0080000026d942c [tg3]
#6 [c000000036c1bc60] process_one_work at c00000000019e5c4
...

This issue can be avoided by aborting tg3_reset_task() if EEH error
recovery is already in progress.

Fixes: db84bf43ef23 ("tg3: tg3_reset_task() needs to use rtnl_lock to synchronize")
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230124185339.225806-1-drc@linux.vnet.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'fs.fuse.acl.v6.2-rc6' of git://git./linux/kernel/git/vfs/idmapping

Pull fuse ACL fix from Christian Brauner:
"The new posix acl API doesn't depend on the xattr handler
  infrastructure anymore and instead only relies on the posix acl inode
  operations. As a result daemons without FUSE_POSIX_ACL are unable to
  use posix acls like they used to.

  Fix this by copying what we did for overlayfs during the posix acl api
  conversion. Make fuse implement a dedicated ->get_inode_acl() method
  as does overlayfs. Fuse can then also uses this to express different
  needs for vfs permission checking during lookup and acl based
  retrieval via the regular system call path.

  This allows fuse to continue to refuse retrieving posix acls for
  daemons that don't set FUSE_POSXI_ACL for permission checking while
  also allowing a fuse server to retrieve it via the usual system calls"

* tag 'fs.fuse.acl.v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
  fuse: fixes after adapting to new posix acl api

selftests: amd-pstate: Don't delete source files via Makefile

Revert the portion of a recent Makefile change that incorrectly
deletes source files when doing "make clean".

Fixes: ba2d788aa873 ("selftests: amd-pstate: Trigger tbench benchmark and test cpus")
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Merge branch 'mptcp-fixes'

Jeremy Kerr says:

====================
net: mctp: struct sock lifetime fixes

This series is a set of fixes for the sock lifetime handling in the
AF_MCTP code, fixing a uaf reported by Noam Rathaus
<noamr@ssd-disclosure.com>.

The Fixes: tags indicate the original patches affected, but some
tweaking to backport to those commits may be needed; I have a separate
branch with backports to 5.15 if that helps with stable trees.

Of course, any comments/queries most welcome.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: mctp: mark socks as dead on unhash, prevent re-add

Once a socket has been unhashed, we want to prevent it from being
re-used in a sk_key entry as part of a routing operation.

This change marks the sk as SOCK_DEAD on unhash, which prevents addition
into the net's key list.

We need to do this during the key add path, rather than key lookup, as
we release the net keys_lock between those operations.

Fixes: 4a992bbd3650 ("mctp: Implement message fragmentation & reassembly")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mctp: hold key reference when looking up a general key

Currently, we have a race where we look up a sock through a "general"
(ie, not directly associated with the (src,dest,tag) tuple) key, then
drop the key reference while still holding the key's sock.

This change expands the key reference until we've finished using the
sock, and hence the sock reference too.

Commit message changes from Jeremy Kerr <jk@codeconstruct.com.au>.

Reported-by: Noam Rathaus <noamr@ssd-disclosure.com>
Fixes: 73c618456dc5 ("mctp: locking, lifetime and validity changes for sk_keys")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mctp: move expiry timer delete to unhash

Currently, we delete the key expiry timer (in sk->close) before
unhashing the sk. This means that another thread may find the sk through
its presence on the key list, and re-queue the timer.

This change moves the timer deletion to the unhash, after we have made
the key no longer observable, so the timer cannot be re-queued.

Fixes: 7b14e15ae6f4 ("mctp: Implement a timeout for tags")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mctp: add an explicit reference from a mctp_sk_key to sock

Currently, we correlate the mctp_sk_key lifetime to the sock lifetime
through the sock hash/unhash operations, but this is pretty tenuous, and
there are cases where we may have a temporary reference to an unhashed
sk.

This change makes the reference more explicit, by adding a hold on the
sock when it's associated with a mctp_sk_key, released on final key
unref.

Fixes: 73c618456dc5 ("mctp: locking, lifetime and validity changes for sk_keys")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ravb-fixes'

Yoshihiro Shimoda says:

====================
net: ravb: Fix potential issues

Fix potentiall issues on the ravb driver.

Changes from v2:
https://lore.kernel.org/all/20230123131331.1425648-1-yoshihiro.shimoda.uh@renesas.com/
- Add Reviewed-by in the patch [2/2].
- Add a commit description in the patch [2/2].

Changes from v1:
https://lore.kernel.org/all/20230119043920.875280-1-yoshihiro.shimoda.uh@renesas.com/
- Fix typo in the patch [1/2].
- Add Reviewed-by in the patch [1/2].
- Fix "Fixed" tag in the patch [2/2].
- Fix a comment indentation of the code in the patch [2/2].
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: ravb: Fix possible hang if RIS2_QFF1 happen

Since this driver enables the interrupt by RIC2_QFE1, this driver
should clear the interrupt flag if it happens. Otherwise, the interrupt
causes to hang the system.

Note that this also fix a minor coding style (a comment indentation)
around the fixed code.

Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ravb: Fix lack of register setting after system resumed for Gen3

After system entered Suspend to RAM, registers setting of this
hardware is reset because the SoC will be turned off. On R-Car Gen3
(info->ccc_gac), ravb_ptp_init() is called in ravb_probe() only. So,
after system resumed, it lacks of the initial settings for ptp. So,
add ravb_ptp_{init,stop}() into ravb_{resume,suspend}().

Fixes: f5d7837f96e5 ("ravb: ptp: Add CONFIG mode support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

platform/x86: thinkpad_acpi: Fix profile modes on Intel platforms

My last commit to fix profile mode displays on AMD platforms caused
an issue on Intel platforms - sorry!

In it I was reading the current functional mode (MMC, PSC, AMT) from
the BIOS but didn't account for the fact that on some of our Intel
platforms I use a different API which returns just the profile and not
the functional mode.

This commit fixes it so that on Intel platforms it knows the functional
mode is always MMC.

I also fixed a potential problem that a platform may try to set the mode
for both MMC and PSC - which was incorrect.

Tested on X1 Carbon 9 (Intel) and Z13 (AMD).

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216963
Fixes: fde5f74ccfc7 ("platform/x86: thinkpad_acpi: Fix profile mode display in AMT mode")
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230124153623.145188-1-mpearson-lenovo@squebb.ca
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

net/x25: Fix to not accept on connected socket

When listen() and accept() are called on an x25 socket
that connect() succeeds, accept() succeeds immediately.
This is because x25_connect() queues the skb to
sk->sk_receive_queue, and x25_accept() dequeues it.

This creates a child socket with the sk of the parent
x25 socket, which can cause confusion.

Fix x25_listen() to return -EINVAL if the socket has
already been successfully connect()ed to avoid this issue.

Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Perform SCTP vtag verification for ABORT/SHUTDOWN_COMPLETE according
   to RFC 9260, Sect 8.5.1.

2) Fix infinite loop if SCTP chunk size is zero in for_each_sctp_chunk().
   And remove useless check in this macro too.

3) Revert DATA_SENT state in the SCTP tracker, this was applied in the
   previous merge window. Next patch in this series provides a more
   simple approach to multihoming support.

4) Unify HEARTBEAT_ACKED and ESTABLISHED states for SCTP multihoming
   support, use default ESTABLISHED of 210 seconds based on
   heartbeat timeout * maximum number of retransmission + round-trip timeout.
   Otherwise, SCTP conntrack entry that represents secondary paths
   remain stale in the table for up to 5 days.

This is a slightly large batch with fixes for the SCTP connection
tracking helper, all patches from Sriram Yagnaraman.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: conntrack: unify established states for SCTP paths
  Revert "netfilter: conntrack: add sctp DATA_SENT state"
  netfilter: conntrack: fix bug in for_each_sctp_chunk
  netfilter: conntrack: fix vtag checks for ABORT/SHUTDOWN_COMPLETE
====================

Link: https://lore.kernel.org/r/20230124183933.4752-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ice: move devlink port creation/deletion

Commit a286ba738714 ("ice: reorder PF/representor devlink
port register/unregister flows") moved the code to create
and destroy the devlink PF port. This was fine, but created
a corner case issue in the case of ice_register_netdev()
failing. In that case, the driver would end up calling
ice_devlink_destroy_pf_port() twice.

Additionally, it makes no sense to tie creation of the devlink
PF port to the creation of the netdev so separate out the
code to create/destroy the devlink PF port from the netdev
code. This makes it a cleaner interface.

Fixes: a286ba738714 ("ice: reorder PF/representor devlink port register/unregister flows")
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230124005714.3996270-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sctp: fail if no bound addresses can be used for a given scope

Currently, if you bind the socket to something like:
        servaddr.sin6_family = AF_INET6;
        servaddr.sin6_port = htons(0);
        servaddr.sin6_scope_id = 0;
        inet_pton(AF_INET6, "::1", &servaddr.sin6_addr);

And then request a connect to:
        connaddr.sin6_family = AF_INET6;
        connaddr.sin6_port = htons(20000);
        connaddr.sin6_scope_id = if_nametoindex("lo");
        inet_pton(AF_INET6, "fe88::1", &connaddr.sin6_addr);

What the stack does is:
- bind the socket
- create a new asoc
- to handle the connect
   - copy the addresses that can be used for the given scope
   - try to connect

But the copy returns 0 addresses, and the effect is that it ends up
trying to connect as if the socket wasn't bound, which is not the
desired behavior. This unexpected behavior also allows KASLR leaks
through SCTP diag interface.

The fix here then is, if when trying to copy the addresses that can
be used for the scope used in connect() it returns 0 addresses, bail
out. This is what TCP does with a similar reproducer.

Reported-by: Pietro Borrello <borrello@diag.uniroma1.it>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/9fcd182f1099f86c6661f3717f63712ddd1c676c.1674496737.git.marcelo.leitner@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'modules-6.2-rc6' of git://git./linux/kernel/git/mcgrof/linux

Pull module fix from Luis Chamberlain:
"Theis is a fix we have been delaying for v6.2 due to lack of early
  testing on linux-next.

  The commit has been sitting in linux-next since December and testing
  has also been now a bit extensive by a few developers. Since this is a
  fix which definitely will go to v6.3 it should also apply to v6.2 so
  if there are any issues we pick them up earlier rather than later. The
  fix fixes a regression since v5.3, prior to me helping with module
  maintenance, however, the issue is real in that in the worst case now
  can prevent boot.

  We've discussed all possible corner cases [0] and at last do feel this
  is ready for v6.2-rc6"

Link https://lore.kernel.org/all/Y9A4fiobL6IHp%2F%2FP@bombadil.infradead.org/ [0]

* tag 'modules-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  module: Don't wait for GOING modules

net/sched: sch_taprio: do not schedule in taprio_reset()

As reported by syzbot and hinted by Vinicius, I should not have added
a qdisc_synchronize() call in taprio_reset()

taprio_reset() can be called with qdisc spinlock held (and BH disabled)
as shown in included syzbot report [1].

Only taprio_destroy() needed this synchronization, as explained
in the blamed commit changelog.

[1]

BUG: scheduling while atomic: syz-executor150/5091/0x00000202
2 locks held by syz-executor150/5091:
Modules linked in:
Preemption disabled at:
[<0000000000000000>] 0x0
Kernel panic - not syncing: scheduling while atomic: panic_on_warn set ...
CPU: 1 PID: 5091 Comm: syz-executor150 Not tainted 6.2.0-rc3-syzkaller-00219-g010a74f52203 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106
panic+0x2cc/0x626 kernel/panic.c:318
check_panic_on_warn.cold+0x19/0x35 kernel/panic.c:238
__schedule_bug.cold+0xd5/0xfe kernel/sched/core.c:5836
schedule_debug kernel/sched/core.c:5865 [inline]
__schedule+0x34e4/0x5450 kernel/sched/core.c:6500
schedule+0xde/0x1b0 kernel/sched/core.c:6682
schedule_timeout+0x14e/0x2a0 kernel/time/timer.c:2167
schedule_timeout_uninterruptible kernel/time/timer.c:2201 [inline]
msleep+0xb6/0x100 kernel/time/timer.c:2322
qdisc_synchronize include/net/sch_generic.h:1295 [inline]
taprio_reset+0x93/0x270 net/sched/sch_taprio.c:1703
qdisc_reset+0x10c/0x770 net/sched/sch_generic.c:1022
dev_reset_queue+0x92/0x130 net/sched/sch_generic.c:1285
netdev_for_each_tx_queue include/linux/netdevice.h:2464 [inline]
dev_deactivate_many+0x36d/0x9f0 net/sched/sch_generic.c:1351
dev_deactivate+0xed/0x1b0 net/sched/sch_generic.c:1374
qdisc_graft+0xe4a/0x1380 net/sched/sch_api.c:1080
tc_modify_qdisc+0xb6b/0x19a0 net/sched/sch_api.c:1689
rtnetlink_rcv_msg+0x43e/0xca0 net/core/rtnetlink.c:6141
netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1330 [inline]
netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1356
netlink_sendmsg+0x91b/0xe10 net/netlink/af_netlink.c:1932
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xd3/0x120 net/socket.c:734
____sys_sendmsg+0x712/0x8c0 net/socket.c:2476
___sys_sendmsg+0x110/0x1b0 net/socket.c:2530
__sys_sendmsg+0xf7/0x1c0 net/socket.c:2559
do_syscall_x64 arch/x86/entry/common.c:50 [inline]

Fixes: 3a415d59c1db ("net/sched: sch_taprio: fix possible use-after-free")
Link: https://lore.kernel.org/netdev/167387581653.2747.13878941339893288655.git-patchwork-notify@kernel.org/T/
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20230123084552.574396-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'rust-fixes-6.2' of https://github.com/Rust-for-Linux/linux

Pull rust fix from Miguel Ojeda:

- Avoid evaluating arguments in 'pr_*' macros in 'unsafe' blocks

* tag 'rust-fixes-6.2' of https://github.com/Rust-for-Linux/linux:
rust: print: avoid evaluating arguments in `pr_*` macros in `unsafe` blocks

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"ARM64:

   - Pass the correct address to mte_clear_page_tags() on initialising a
     tagged page

   - Plug a race against a GICv4.1 doorbell interrupt while saving the
     vgic-v3 pending state.

  x86:

   - A command line parsing fix and a clang compilation fix for
     selftests

   - A fix for a longstanding VMX issue, that surprisingly was only
     found now to affect real world guests"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: selftests: Make reclaim_period_ms input always be positive
  KVM: x86/vmx: Do not skip segment attributes if unusable bit is set
  selftests: kvm: move declaration at the beginning of main()
  KVM: arm64: GICv4.1: Fix race with doorbell on VPE activation/deactivation
  KVM: arm64: Pass the actual page address to mte_clear_page_tags()

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Six fixes, all in drivers.

  The biggest are the UFS devfreq fixes which address a lock inversion
  and the two iscsi_tcp fixes which try to prevent a use after free from
  userspace still accessing an area which the kernel has released (seen
  by KASAN)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: device_handler: alua: Remove a might_sleep() annotation
  scsi: iscsi_tcp: Fix UAF during login when accessing the shost ipaddress
  scsi: iscsi_tcp: Fix UAF during logout when accessing the shost ipaddress
  scsi: ufs: core: Fix devfreq deadlocks
  scsi: hpsa: Fix allocation size for scsi_host_alloc()
  scsi: target: core: Fix warning on RT kernels

Merge tag 'nfsd-6.2-5' of git://git./linux/kernel/git/cel/linux

Pull nfsd fix from Chuck Lever:

- Nail another UAF in NFSD's filecache

* tag 'nfsd-6.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: don't free files unconditionally in __nfsd_file_cache_purge

Merge tag 'fscrypt-for-linus' of git://git./fs/fscrypt/linux

Pull fscrypt MAINTAINERS entry update from Eric Biggers:
"Update the MAINTAINERS file entry for fscrypt"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
MAINTAINERS: update fscrypt git repo

module: Don't wait for GOING modules

During a system boot, it can happen that the kernel receives a burst of
requests to insert the same module but loading it eventually fails
during its init call. For instance, udev can make a request to insert
a frequency module for each individual CPU when another frequency module
is already loaded which causes the init function of the new module to
return an error.

Since commit 6e6de3dee51a ("kernel/module.c: Only return -EEXIST for
modules that have finished loading"), the kernel waits for modules in
MODULE_STATE_GOING state to finish unloading before making another
attempt to load the same module.

This creates unnecessary work in the described scenario and delays the
boot. In the worst case, it can prevent udev from loading drivers for
other devices and might cause timeouts of services waiting on them and
subsequently a failed boot.

This patch attempts a different solution for the problem 6e6de3dee51a
was trying to solve. Rather than waiting for the unloading to complete,
it returns a different error code (-EBUSY) for modules in the GOING
state. This should avoid the error situation that was described in
6e6de3dee51a (user space attempting to load a dependent module because
the -EEXIST error code would suggest to user space that the first module
had been loaded successfully), while avoiding the delay situation too.

This has been tested on linux-next since December 2022 and passes
all kmod selftests except test 0009 with module compression enabled
but it has been confirmed that this issue has existed and has gone
unnoticed since prior to this commit and can also be reproduced without
module compression with a simple usleep(5000000) on tools/modprobe.c [0].
These failures are caused by hitting the kernel mod_concurrent_max and can
happen either due to a self inflicted kernel module auto-loead DoS somehow
or on a system with large CPU count and each CPU count incorrectly triggering
many module auto-loads. Both of those issues need to be fixed in-kernel.

[0] https://lore.kernel.org/all/Y9A4fiobL6IHp%2F%2FP@bombadil.infradead.org/

Fixes: 6e6de3dee51a ("kernel/module.c: Only return -EEXIST for modules that have finished loading")
Co-developed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Petr Mladek <pmladek@suse.com>
[mcgrof: enhance commit log with testing and kmod test result interpretation ]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

Merge tag 'fsverity-for-linus' of git://git./fs/fsverity/linux

Pull fsverity MAINTAINERS entry update from Eric Biggers:
"Update the MAINTAINERS file entry for fsverity"

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
MAINTAINERS: update fsverity git repo, list, and patchwork

ext4: make xattr char unsignedness in hash explicit

Commit f3bbac32475b ("ext4: deal with legacy signed xattr name hash
values") added a hashing function for the legacy case of having the
xattr hash calculated using a signed 'char' type.  It left the unsigned
case alone, since it's all implicitly handled by the '-funsigned-char'
compiler option.

However, there's been some noise about back-porting it all into stable
kernels that lack the '-funsigned-char', so let's just make that at
least possible by making the whole 'this uses unsigned char' very
explicit in the code itself.  Whether such a back-port is really
warranted or not, I'll leave to others, but at least together with this
change it is technically sensible.

Also, add a 'pr_warn_once()' for reporting the "hey, signedness for this
hash calculation has changed" issue.  Hopefully it never triggers except
for that xfstests generic/454 test-case, but even if it does it's just
good information to have.

If for no other reason than "we can remove the legacy signed hash code
entirely if nobody ever sees the message any more".

Cc: Sasha Levin <sashal@kernel.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Theodore Ts'o <tytso@mit.edu>,
Cc: Jason Donenfeld <Jason@zx2c4.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert "Merge branch 'ethtool-mac-merge'"

This reverts commit 0ad999c1eec879f06cc52ef7df4d0dbee4a2d7eb, reversing
changes made to e38553bdc377e3e7a6caa9dd9770d8b644d8dac3.

It was not intended for net.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>

fuse: fixes after adapting to new posix acl api

This cycle we ported all filesystems to the new posix acl api. While
looking at further simplifications in this area to remove the last
remnants of the generic dummy posix acl handlers we realized that we
regressed fuse daemons that don't set FUSE_POSIX_ACL but still make use
of posix acls.

With the change to a dedicated posix acl api interacting with posix acls
doesn't go through the old xattr codepaths anymore and instead only
relies the get acl and set acl inode operations.

Before this change fuse daemons that don't set FUSE_POSIX_ACL were able
to get and set posix acl albeit with two caveats. First, that posix acls
aren't cached. And second, that they aren't used for permission checking
in the vfs.

We regressed that use-case as we currently refuse to retrieve any posix
acls if they aren't enabled via FUSE_POSIX_ACL. So older fuse daemons
would see a change in behavior.

We can restore the old behavior in multiple ways. We could change the
new posix acl api and look for a dedicated xattr handler and if we find
one prefer that over the dedicated posix acl api. That would break the
consistency of the new posix acl api so we would very much prefer not to
do that.

We could introduce a new ACL_*_CACHE sentinel that would instruct the
vfs permission checking codepath to not call into the filesystem and
ignore acls.

But a more straightforward fix for v6.2 is to do the same thing that
Overlayfs does and give fuse a separate get acl method for permission
checking. Overlayfs uses this to express different needs for vfs
permission lookup and acl based retrieval via the regular system call
path as well. Let fuse do the same for now. This way fuse can continue
to refuse to retrieve posix acls for daemons that don't set
FUSE_POSXI_ACL for permission checking while allowing a fuse server to
retrieve it via the usual system calls.

In the future, we could extend the get acl inode operation to not just
pass a simple boolean to indicate rcu lookup but instead make it a flag
argument. Then in addition to passing the information that this is an
rcu lookup to the filesystem we could also introduce a flag that tells
the filesystem that this is a request from the vfs to use these acls for
permission checking. Then fuse could refuse the get acl request for
permission checking when the daemon doesn't have FUSE_POSIX_ACL set in
the same get acl method. This would also help Overlayfs and allow us to
remove the second method for it as well.

But since that change is more invasive as we need to update the get acl
inode operation for multiple filesystems we should not do this as a fix
for v6.2. Instead we will do this for the v6.3 merge window.

Fwiw, since posix acls are now always correctly translated in the new
posix acl api we could also allow them to be used for daemons without
FUSE_POSIX_ACL that are not mounted on the host. But this is behavioral
change and again if dones should be done for v6.3. For now, let's just
restore the original behavior.

A nice side-effect of this change is that for fuse daemons with and
without FUSE_POSIX_ACL the same code is used for posix acls in a
backwards compatible way. This also means we can remove the legacy xattr
handlers completely. We've also added comments to explain the expected
behavior for daemons without FUSE_POSIX_ACL into the code.

Fixes: 318e66856dde ("xattr: use posix acl api")
Signed-off-by: Seth Forshee (Digital Ocean) <sforshee@kernel.org>
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

ACPI: video: Fix apple gmux detection

Some apple laptop models have an ACPI device with a HID of APP000B
and that device has an IO resource (so it does not describe the new
unsupported MMIO based gmux type), but there actually is no gmux
in the laptop at all.

The gmux_probe() function of the actual apple-gmux driver has code
to detect this, this code has been factored out into a new
apple_gmux_detect() helper in apple-gmux.h.

Use this new function to fix acpi_video_get_backlight_type() wrongly
returning apple_gmux as type on the following laptops:

MacBookPro5,4
https://pastebin.com/8Xjq7RhS

MacBookPro8,1
https://linux-hardware.org/?probe=e513cfbadb&log=dmesg

MacBookPro9,2
https://bugzilla.kernel.org/attachment.cgi?id=278961

MacBookPro10,2
https://lkml.org/lkml/2014/9/22/657

MacBookPro11,2
https://forums.fedora-fr.org/viewtopic.php?id=70142

MacBookPro11,4
https://raw.githubusercontent.com/im-0/investigate-card-reader-suspend-problem-on-mbp11.4/mast

Fixes: 21245df307cb ("ACPI: video: Add Apple GMUX brightness control detection")
Link: https://lore.kernel.org/platform-driver-x86/20230123113750.462144-1-hdegoede@redhat.com/
Reported-by: Emmanouil Kouroupakis <kartebi@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230124105754.62167-4-hdegoede@redhat.com

platform/x86: apple-gmux: Add apple_gmux_detect() helper

Add a new (static inline) apple_gmux_detect() helper to apple-gmux.h
which can be used for gmux detection instead of apple_gmux_present().

The latter is not really reliable since an ACPI device with a HID
of APP000B is present on some devices without a gmux at all, as well
as on devices with a newer (unsupported) MMIO based gmux model.

This causes apple_gmux_present() to return false-positives on
a number of different Apple laptop models.

This new helper uses the same probing as the actual apple-gmux
driver, so that it does not return false positives.

To avoid code duplication the gmux_probe() function of the actual
driver is also moved over to using the new apple_gmux_detect() helper.

This avoids false positives (vs _HID + IO region detection) on:

MacBookPro5,4
https://pastebin.com/8Xjq7RhS

MacBookPro8,1
https://linux-hardware.org/?probe=e513cfbadb&log=dmesg

MacBookPro9,2
https://bugzilla.kernel.org/attachment.cgi?id=278961

MacBookPro10,2
https://lkml.org/lkml/2014/9/22/657

MacBookPro11,2
https://forums.fedora-fr.org/viewtopic.php?id=70142

MacBookPro11,4
https://raw.githubusercontent.com/im-0/investigate-card-reader-suspend-problem-on-mbp11.4/master/test-16/dmesg

Fixes: 21245df307cb ("ACPI: video: Add Apple GMUX brightness control detection")
Link: https://lore.kernel.org/platform-driver-x86/20230123113750.462144-1-hdegoede@redhat.com/
Reported-by: Emmanouil Kouroupakis <kartebi@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230124105754.62167-3-hdegoede@redhat.com

platform/x86: apple-gmux: Move port defines to apple-gmux.h

This is a preparation patch for adding a new static inline
apple_gmux_detect() helper which actually checks a supported
gmux is present, rather then only checking an ACPI device with
the HID is there as apple_gmux_present() does.

Fixes: 21245df307cb ("ACPI: video: Add Apple GMUX brightness control detection")
Link: https://lore.kernel.org/platform-driver-x86/20230123113750.462144-1-hdegoede@redhat.com/
Reported-by: Emmanouil Kouroupakis <kartebi@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230124105754.62167-2-hdegoede@redhat.com

platform/x86: hp-wmi: Fix cast to smaller integer type warning

Fix the following compiler warning:

drivers/platform/x86/hp/hp-wmi.c:551:24: warning: cast to smaller integer
type 'enum hp_wmi_radio' from 'void *' [-Wvoid-pointer-to-enum-cast]

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230123132824.660062-1-hdegoede@redhat.com

platform/x86/amd: pmc: Add a module parameter to disable workarounds

Some users may want to live with the bugs that exist in platform
firmware and have workarounds in AMD PMC driver.

To allow them to bypass these workarounds, introduce a module
parameter.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230120191519.15926-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN

By default when the system is configured for low power idle in the FADT
the keyboard is set up as a wake source.  This matches the behavior that
Windows uses for Modern Standby as well.

It has been reported that a variety of AMD based designs there are
spurious wakeups are happening where two IRQ sources are active.

For example:
```
PM: Triggering wakeup from IRQ 9
PM: Triggering wakeup from IRQ 1
```

In these designs IRQ 9 is the ACPI SCI and IRQ 1 is the keyboard.
One way to trigger this problem is to suspend the laptop and then unplug
the AC adapter.  The SOC will be in a hardware sleep state and plugging
in the AC adapter returns control to the kernel's s2idle loop.

Normally if just IRQ 9 was active the s2idle loop would advance any EC
transactions and no other IRQ being active would cause the s2idle loop
to put the SOC back into hardware sleep state.

When this bug occurred IRQ 1 is also active even if no keyboard activity
occurred. This causes the s2idle loop to break and the system to wake.

This is a platform firmware bug triggering IRQ1 without keyboard activity.
This occurs in Windows as well, but Windows will enter "SW DRIPS" and
then with no activity enters back into "HW DRIPS" (hardware sleep state).

This issue affects Renoir, Lucienne, Cezanne, and Barcelo platforms. It
does not happen on newer systems such as Mendocino or Rembrandt.

It's been fixed in newer platform firmware.  To avoid triggering the bug
on older systems check the SMU F/W version and adjust the policy at suspend
time for s2idle wakeup from keyboard on these systems. A lot of thought
and experimentation has been given around the timing of disabling IRQ1,
and to make it work the "suspend" PM callback is restored.

Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2115
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1951
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230120191519.15926-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: asus-wmi: Fix kbd_dock_devid tablet-switch reporting

Commit 1ea0d3b46798 ("platform/x86: asus-wmi: Simplify tablet-mode-switch
handling") unified the asus-wmi tablet-switch handling, but it did not take
into account that the value returned for the kbd_dock_devid WMI method is
inverted where as the other ones are not inverted.

This causes asus-wmi to report an inverted tablet-switch state for devices
which use the kbd_dock_devid, which causes libinput to ignore touchpad
events while the affected T10x model 2-in-1s are docked.

Add inverting of the return value in the kbd_dock_devid case to fix this.

Fixes: 1ea0d3b46798 ("platform/x86: asus-wmi: Simplify tablet-mode-switch handling")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230120143441.527334-1-hdegoede@redhat.com

platform/x86: gigabyte-wmi: add support for B450M DS3H WIFI-CF

To the best of my knowledge this is the same board as the B450M DS3H-CF,
but with an added WiFi card. Name obtained using dmidecode, tested
with force_load on v6.1.6

Signed-off-by: Kevin Kuriakose <kevinmkuriakose@gmail.com>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230119150925.31962-1-kevinmkuriakose@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: hp-wmi: Handle Omen Key event

Add support to map the "HP Omen Key" to KEY_PROG2. Laptops in the HP
Omen Series open the HP Omen Command Center application on windows. But,
on linux it fails with the following message from the hp-wmi driver:

[ 5143.415714] hp_wmi: Unknown event_id - 29 - 0x21a5

Also adds support to map Fn+Esc to KEY_FN_ESC. This currently throws the
following message on the hp-wmi driver:

[ 6082.143785] hp_wmi: Unknown key code - 0x21a7

There is also a "Win-Lock" key on HP Omen Laptops which supports
Enabling and Disabling the Windows key, which trigger commands 0x21a4
and 0x121a4 respectively, but I wasn't able to find any KEY in input.h
to map this to.

Signed-off-by: Rishit Bansal <rishitbansal0@gmail.com>
Link: https://lore.kernel.org/r/20230120221214.24426-1-rishitbansal0@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: dell-wmi: Add a keymap for KEY_MUTE in type 0x0010 table

Some platforms send the speaker-mute key from EC. dell-wmi can't
recognize it.

Add a new keymap for KEY_MUTE in type 0x0010 table.

Signed-off-by: Koba Ko <koba.ko@canonical.com>
Link: https://lore.kernel.org/r/20230117123436.200440-1-koba.ko@canonical.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

netrom: Fix use-after-free of a listening socket.

syzbot reported a use-after-free in do_accept(), precisely nr_accept()
as sk_prot_alloc() allocated the memory and sock_put() frees it. [0]

The issue could happen if the heartbeat timer is fired and
nr_heartbeat_expiry() calls nr_destroy_socket(), where a socket
has SOCK_DESTROY or a listening socket has SOCK_DEAD.

In this case, the first condition cannot be true.  SOCK_DESTROY is
flagged in nr_release() only when the file descriptor is close()d,
but accept() is being called for the listening socket, so the second
condition must be true.

Usually, the AF_NETROM listener neither starts timers nor sets
SOCK_DEAD.  However, the condition is met if connect() fails before
listen().  connect() starts the t1 timer and heartbeat timer, and
t1timer calls nr_disconnect() when timeout happens.  Then, SOCK_DEAD
is set, and if we call listen(), the heartbeat timer calls
nr_destroy_socket().

  nr_connect
    nr_establish_data_link(sk)
      nr_start_t1timer(sk)
    nr_start_heartbeat(sk)
                                    nr_t1timer_expiry
                                      nr_disconnect(sk, ETIMEDOUT)
                                        nr_sk(sk)->state = NR_STATE_0
                                        sk->sk_state = TCP_CLOSE
                                        sock_set_flag(sk, SOCK_DEAD)
nr_listen
  if (sk->sk_state != TCP_LISTEN)
    sk->sk_state = TCP_LISTEN
                                    nr_heartbeat_expiry
                                      switch (nr->state)
                                      case NR_STATE_0
                                        if (sk->sk_state == TCP_LISTEN &&
                                            sock_flag(sk, SOCK_DEAD))
                                          nr_destroy_socket(sk)

This path seems expected, and nr_destroy_socket() is called to clean
up resources.  Initially, there was sock_hold() before nr_destroy_socket()
so that the socket would not be freed, but the commit 517a16b1a88b
("netrom: Decrease sock refcount when sock timers expire") accidentally
removed it.

To fix use-after-free, let's add sock_hold().

[0]:
BUG: KASAN: use-after-free in do_accept+0x483/0x510 net/socket.c:1848
Read of size 8 at addr ffff88807978d398 by task syz-executor.3/5315

CPU: 0 PID: 5315 Comm: syz-executor.3 Not tainted 6.2.0-rc3-syzkaller-00165-gd9fc1511728c #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:306 [inline]
print_report+0x15e/0x461 mm/kasan/report.c:417
kasan_report+0xbf/0x1f0 mm/kasan/report.c:517
do_accept+0x483/0x510 net/socket.c:1848
__sys_accept4_file net/socket.c:1897 [inline]
__sys_accept4+0x9a/0x120 net/socket.c:1927
__do_sys_accept net/socket.c:1944 [inline]
__se_sys_accept net/socket.c:1941 [inline]
__x64_sys_accept+0x75/0xb0 net/socket.c:1941
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fa436a8c0c9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fa437784168 EFLAGS: 00000246 ORIG_RAX: 000000000000002b
RAX: ffffffffffffffda RBX: 00007fa436bac050 RCX: 00007fa436a8c0c9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005
RBP: 00007fa436ae7ae9 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffebc6700df R14: 00007fa437784300 R15: 0000000000022000
</TASK>

Allocated by task 5294:
kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
____kasan_kmalloc mm/kasan/common.c:371 [inline]
____kasan_kmalloc mm/kasan/common.c:330 [inline]
__kasan_kmalloc+0xa3/0xb0 mm/kasan/common.c:380
kasan_kmalloc include/linux/kasan.h:211 [inline]
__do_kmalloc_node mm/slab_common.c:968 [inline]
__kmalloc+0x5a/0xd0 mm/slab_common.c:981
kmalloc include/linux/slab.h:584 [inline]
sk_prot_alloc+0x140/0x290 net/core/sock.c:2038
sk_alloc+0x3a/0x7a0 net/core/sock.c:2091
nr_create+0xb6/0x5f0 net/netrom/af_netrom.c:433
__sock_create+0x359/0x790 net/socket.c:1515
sock_create net/socket.c:1566 [inline]
__sys_socket_create net/socket.c:1603 [inline]
__sys_socket_create net/socket.c:1588 [inline]
__sys_socket+0x133/0x250 net/socket.c:1636
__do_sys_socket net/socket.c:1649 [inline]
__se_sys_socket net/socket.c:1647 [inline]
__x64_sys_socket+0x73/0xb0 net/socket.c:1647
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Freed by task 14:
kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:518
____kasan_slab_free mm/kasan/common.c:236 [inline]
____kasan_slab_free+0x13b/0x1a0 mm/kasan/common.c:200
kasan_slab_free include/linux/kasan.h:177 [inline]
__cache_free mm/slab.c:3394 [inline]
__do_kmem_cache_free mm/slab.c:3580 [inline]
__kmem_cache_free+0xcd/0x3b0 mm/slab.c:3587
sk_prot_free net/core/sock.c:2074 [inline]
__sk_destruct+0x5df/0x750 net/core/sock.c:2166
sk_destruct net/core/sock.c:2181 [inline]
__sk_free+0x175/0x460 net/core/sock.c:2192
sk_free+0x7c/0xa0 net/core/sock.c:2203
sock_put include/net/sock.h:1991 [inline]
nr_heartbeat_expiry+0x1d7/0x460 net/netrom/nr_timer.c:148
call_timer_fn+0x1da/0x7c0 kernel/time/timer.c:1700
expire_timers+0x2c6/0x5c0 kernel/time/timer.c:1751
__run_timers kernel/time/timer.c:2022 [inline]
__run_timers kernel/time/timer.c:1995 [inline]
run_timer_softirq+0x326/0x910 kernel/time/timer.c:2035
__do_softirq+0x1fb/0xadc kernel/softirq.c:571

Fixes: 517a16b1a88b ("netrom: Decrease sock refcount when sock timers expire")
Reported-by: syzbot+5fafd5cfe1fc91f6b352@syzkaller.appspotmail.com
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230120231927.51711-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

netfilter: conntrack: unify established states for SCTP paths

An SCTP endpoint can start an association through a path and tear it
down over another one. That means the initial path will not see the
shutdown sequence, and the conntrack entry will remain in ESTABLISHED
state for 5 days.

By merging the HEARTBEAT_ACKED and ESTABLISHED states into one
ESTABLISHED state, there remains no difference between a primary or
secondary path. The timeout for the merged ESTABLISHED state is set to
210 seconds (hb_interval * max_path_retrans + rto_max). So, even if a
path doesn't see the shutdown sequence, it will expire in a reasonable
amount of time.

With this change in place, there is now more than one state from which
we can transition to ESTABLISHED, COOKIE_ECHOED and HEARTBEAT_SENT, so
handle the setting of ASSURED bit whenever a state change has happened
and the new state is ESTABLISHED. Removed the check for dir==REPLY since
the transition to ESTABLISHED can happen only in the reply direction.

Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Revert "netfilter: conntrack: add sctp DATA_SENT state"

This reverts commit (bff3d0534804: "netfilter: conntrack: add sctp
DATA_SENT state")

Using DATA/SACK to detect a new connection on secondary/alternate paths
works only on new connections, while a HEARTBEAT is required on
connection re-use. It is probably consistent to wait for HEARTBEAT to
create a secondary connection in conntrack.

Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: conntrack: fix bug in for_each_sctp_chunk

skb_header_pointer() will return NULL if offset + sizeof(_sch) exceeds
skb->len, so this offset < skb->len test is redundant.

if sch->length == 0, this will end up in an infinite loop, add a check
for sch->length > 0

Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: conntrack: fix vtag checks for ABORT/SHUTDOWN_COMPLETE

RFC 9260, Sec 8.5.1 states that for ABORT/SHUTDOWN_COMPLETE, the chunk
MUST be accepted if the vtag of the packet matches its own tag and the
T bit is not set OR if it is set to its peer's vtag and the T bit is set
in chunk flags. Otherwise the packet MUST be silently dropped.

Update vtag verification for ABORT/SHUTDOWN_COMPLETE based on the above
description.

Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-01-20 (iavf)

This series contains updates to iavf driver only.

Michal Schmidt converts single iavf workqueue to per adapter to avoid
deadlock issues.

Marcin moves setting of VLAN related netdev features to watchdog task to
avoid RTNL deadlock.

Stefan Assmann schedules immediate watchdog task execution on changing
primary MAC to avoid excessive delay.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  iavf: schedule watchdog immediately when changing primary MAC
  iavf: Move netdev_update_features() into watchdog task
  iavf: fix temporary deadlock and failure to set MAC address
====================

Link: https://lore.kernel.org/r/20230120211036.430946-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Fix overlap detection in rbtree set backend: Detect overlap by going
   through the ordered list of valid tree nodes. To shorten the number of
   visited nodes in the list, this algorithm descends the tree to search
   for an existing element greater than the key value to insert that is
   greater than the new element.

2) Fix for the rbtree set garbage collector: Skip inactive and busy
   elements when checking for expired elements to avoid interference
   with an ongoing transaction from control plane.

This is a rather large fix coming at this stage of the 6.2-rc. Since
33c7aba0b4ff ("netfilter: nf_tables: do not set up extensions for end
interval"), bogus overlap errors in the rbtree set occur more frequently.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nft_set_rbtree: skip elements in transaction from garbage collection
  netfilter: nft_set_rbtree: Switch to node list walk for overlap detection
====================

Link: https://lore.kernel.org/r/20230123211601.292930-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS: Update MPTCP maintainer list and CREDITS

My responsibilities at Intel have changed, so I'm handing off exclusive
MPTCP subsystem maintainer duties to Matthieu. It has been a privilege
to see MPTCP through its initial upstreaming and first few years in the
upstream kernel!

Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20230120231121.36121-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ethernet: adi: adin1110: Fix multicast offloading

Driver marked broadcast/multicast frames as offloaded incorrectly.
Mark them as offloaded only when HW offloading has been enabled.
This should happen only for ADIN2111 when both ports are bridged
by the software.

Fixes: bc93e19d088b ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230120090846.18172-1-alexandru.tachici@analog.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: microchip: fix probe of I2C-connected KSZ8563

Starting with commit eee16b147121 ("net: dsa: microchip: perform the
compatibility check for dev probed"), the KSZ switch driver now bails
out if it thinks the DT compatible doesn't match the actual chip ID
read back from the hardware:

ksz9477-switch 1-005f: Device tree specifies chip KSZ9893 but found
KSZ8563, please fix it!

For the KSZ8563, which used ksz_switch_chips[KSZ9893], this was fine
at first, because it indeed shares the same chip id as the KSZ9893.

Commit b44908095612 ("net: dsa: microchip: add separate struct
ksz_chip_data for KSZ8563 chip") started differentiating KSZ9893
compatible chips by consulting the 0x1F register. The resulting breakage
was fixed for the SPI driver in the same commit by introducing the
appropriate ksz_switch_chips[KSZ8563], but not for the I2C driver.

Fix this for I2C-connected KSZ8563 now to get it probing again.

Fixes: b44908095612 ("net: dsa: microchip: add separate struct ksz_chip_data for KSZ8563 chip").
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230120110933.1151054-1-a.fatoum@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv4: prevent potential spectre v1 gadget in fib_metrics_match()

if (!type)
        continue;
    if (type > RTAX_MAX)
        return false;
    ...
    fi_val = fi->fib_metrics->metrics[type - 1];

@type being used as an array index, we need to prevent
cpu speculation or risk leaking kernel memory content.

Fixes: 5f9ae3d9e7e4 ("ipv4: do metrics match when looking up and deleting a route")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230120133140.3624204-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv4: prevent potential spectre v1 gadget in ip_metrics_convert()

if (!type)
continue;
if (type > RTAX_MAX)
return -EINVAL;
...
metrics[type - 1] = val;

@type being used as an array index, we need to prevent
cpu speculation or risk leaking kernel memory content.

Fixes: 6cf9dfd3bd62 ("net: fib: move metrics parsing to a helper")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230120133040.3623463-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'netlink-annotate-various-data-races'

Eric Dumazet says:

====================
netlink: annotate various data races

A recent syzbot report came to my attention.

After addressing it, I also fixed other related races.
====================

Link: https://lore.kernel.org/r/20230120125955.3453768-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netlink: annotate data races around sk_state

netlink_getsockbyportid() reads sk_state while a concurrent
netlink_connect() can change its value.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netlink: annotate data races around dst_portid and dst_group

netlink_getname(), netlink_sendmsg() and netlink_getsockbyportid()
can read nlk->dst_portid and nlk->dst_group while another
thread is changing them.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netlink: annotate data races around nlk->portid

syzbot reminds us netlink_getname() runs locklessly [1]

This first patch annotates the race against nlk->portid.

Following patches take care of the remaining races.

[1]
BUG: KCSAN: data-race in netlink_getname / netlink_insert

write to 0xffff88814176d310 of 4 bytes by task 2315 on cpu 1:
netlink_insert+0xf1/0x9a0 net/netlink/af_netlink.c:583
netlink_autobind+0xae/0x180 net/netlink/af_netlink.c:856
netlink_sendmsg+0x444/0x760 net/netlink/af_netlink.c:1895
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0x38f/0x500 net/socket.c:2476
___sys_sendmsg net/socket.c:2530 [inline]
__sys_sendmsg+0x19a/0x230 net/socket.c:2559
__do_sys_sendmsg net/socket.c:2568 [inline]
__se_sys_sendmsg net/socket.c:2566 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2566
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read to 0xffff88814176d310 of 4 bytes by task 2316 on cpu 0:
netlink_getname+0xcd/0x1a0 net/netlink/af_netlink.c:1144
__sys_getsockname+0x11d/0x1b0 net/socket.c:2026
__do_sys_getsockname net/socket.c:2041 [inline]
__se_sys_getsockname net/socket.c:2038 [inline]
__x64_sys_getsockname+0x3e/0x50 net/socket.c:2038
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0x00000000 -> 0xc9a49780

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 2316 Comm: syz-executor.2 Not tainted 6.2.0-rc3-syzkaller-00030-ge8f60cd7db24-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netfilter: nft_set_rbtree: skip elements in transaction from garbage collection

Skip interference with an ongoing transaction, do not perform garbage
collection on inactive elements. Reset annotated previous end interval
if the expired element is marked as busy (control plane removed the
element right before expiration).

Fixes: 8d8540c4f5e0 ("netfilter: nft_set_rbtree: add timeout support")
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_set_rbtree: Switch to node list walk for overlap detection

...instead of a tree descent, which became overly complicated in an
attempt to cover cases where expired or inactive elements would affect
comparisons with the new element being inserted.

Further, it turned out that it's probably impossible to cover all those
cases, as inactive nodes might entirely hide subtrees consisting of a
complete interval plus a node that makes the current insertion not
overlap.

To speed up the overlap check, descent the tree to find a greater
element that is closer to the key value to insert. Then walk down the
node list for overlap detection. Starting the overlap check from
rb_first() unconditionally is slow, it takes 10 times longer due to the
full linear traversal of the list.

Moreover, perform garbage collection of expired elements when walking
down the node list to avoid bogus overlap reports.

For the insertion operation itself, this essentially reverts back to the
implementation before commit 7c84d41416d8 ("netfilter: nft_set_rbtree:
Detect partial overlaps on insertion"), except that cases of complete
overlap are already handled in the overlap detection phase itself, which
slightly simplifies the loop to find the insertion point.

Based on initial patch from Stefano Brivio, including text from the
original patch description too.

Fixes: 7c84d41416d8 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion")
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge tag 'vfio-v6.2-rc6' of https://github.com/awilliam/linux-vfio

Pull VFIO fixes from Alex Williamson:

- Honor reserved regions when testing for IOMMU find grained super page
   support, avoiding a regression on s390 for a firmware device where
   the existence of the mapping, even if unused can trigger an error
   state. (Niklas Schnelle)

- Fix a deadlock in releasing KVM references by using the alternate
   .release() rather than .destroy() callback for the kvm-vfio device.
   (Yi Liu)

* tag 'vfio-v6.2-rc6' of https://github.com/awilliam/linux-vfio:
  kvm/vfio: Fix potential deadlock on vfio group_lock
  vfio/type1: Respect IOMMU reserved regions in vfio_test_domain_fgsp()

Merge tag 'efi-fixes-for-v6.2-2' of git://git./linux/kernel/git/efi/efi

Pull EFI fixes from Ard Biesheuvel:
"Another couple of EFI fixes, of which the first two were already in
  -next when I sent out the previous PR, but they caused some issues on
  non-EFI boots so I let them simmer for a bit longer.

   - ensure the EFI ResetSystem and ACPI PRM calls are recognized as
     users of the EFI runtime, and therefore protected against
     exceptions

   - account for the EFI runtime stack in the stacktrace code

   - remove Matthew Garrett's MAINTAINERS entry for efivarfs"

* tag 'efi-fixes-for-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: Remove Matthew Garrett as efivarfs maintainer
  arm64: efi: Account for the EFI runtime stack in stack unwinder
  arm64: efi: Avoid workqueue to check whether EFI runtime is live

nfsd: don't free files unconditionally in __nfsd_file_cache_purge

nfsd_file_cache_purge is called when the server is shutting down, in
which case, tearing things down is generally fine, but it also gets
called when the exports cache is flushed.

Instead of walking the cache and freeing everything unconditionally,
handle it the same as when we have a notification of conflicting access.

Fixes: ac3a2585f018 ("nfsd: rework refcounting in filecache")
Reported-by: Ruben Vestergaard <rubenv@drcmr.dk>
Reported-by: Torkil Svensgaard <torkil@drcmr.dk>
Reported-by: Shachar Kagan <skagan@nvidia.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Shachar Kagan <skagan@nvidia.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

ARM: 9287/1: Reduce __thumb2__ definition to crypto files that require it

Commit 1d2e9b67b001 ("ARM: 9265/1: pass -march= only to compiler") added
a __thumb2__ define to ASFLAGS to avoid build errors in the crypto code,
which relies on __thumb2__ for preprocessing. Commit 59e2cf8d21e0 ("ARM:
9275/1: Drop '-mthumb' from AFLAGS_ISA") followed up on this by removing
-mthumb from AFLAGS so that __thumb2__ would not be defined when the
default target was ARMv7 or newer.

Unfortunately, the second commit's fix assumes that the toolchain
defaults to -mno-thumb / -marm, which is not the case for Debian's
arm-linux-gnueabihf target, which defaults to -mthumb:

  $ echo | arm-linux-gnueabihf-gcc -dM -E - | grep __thumb
  #define __thumb2__ 1
  #define __thumb__ 1

This target is used by several CI systems, which will still see
redefined macro warnings, despite '-mthumb' not being present in the
flags:

  <command-line>: warning: "__thumb2__" redefined
  <built-in>: note: this is the location of the previous definition

Remove the global AFLAGS __thumb2__ define and move it to the crypto
folder where it is required by the imported OpenSSL algorithms; the rest
of the kernel should use the internal CONFIG_THUMB2_KERNEL symbol to
know whether or not Thumb2 is being used or not. Be sure that __thumb2__
is undefined first so that there are no macro redefinition warnings.

Link: https://github.com/ClangBuiltLinux/linux/issues/1772
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Fixes: 59e2cf8d21e0 ("ARM: 9275/1: Drop '-mthumb' from AFLAGS_ISA")
Fixes: 1d2e9b67b001 ("ARM: 9265/1: pass -march= only to compiler")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

ipv6: fix reachability confirmation with proxy_ndp

When proxying IPv6 NDP requests, the adverts to the initial multicast
solicits are correct and working. On the other hand, when later a
reachability confirmation is requested (on unicast), no reply is sent.

This causes the neighbor entry expiring on the sending node, which is
mostly a non-issue, as a new multicast request is sent. There are
routers, where the multicast requests are intentionally delayed, and in
these environments the current implementation causes periodic packet
loss for the proxied endpoints.

The root cause is the erroneous decrease of the hop limit, as this
is checked in ndisc.c and no answer is generated when it's 254 instead
of the correct 255.

Cc: stable@vger.kernel.org
Fixes: 46c7655f0b56 ("ipv6: decrease hop limit counter in ip6_forward()")
Signed-off-by: Gergely Risko <gergely.risko@gmail.com>
Tested-by: Gergely Risko <gergely.risko@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ethtool-mac-merge'

Vladimir Oltean say:

====================
ethtool support for IEEE 802.3 MAC Merge layer

Change log
----------

v3->v4:
- add missing opening bracket in ocelot_port_mm_irq()
- moved cfg.verify_time range checking so that it actually takes place
  for the updated rather than old value
v3 at:
https://patchwork.kernel.org/project/netdevbpf/cover/20230117085947.2176464-1-vladimir.oltean@nxp.com/

v2->v3:
- made get_mm return int instead of void
- deleted ETHTOOL_A_MM_SUPPORTED
- renamed ETHTOOL_A_MM_ADD_FRAG_SIZE to ETHTOOL_A_MM_TX_MIN_FRAG_SIZE
- introduced ETHTOOL_A_MM_RX_MIN_FRAG_SIZE
- cleaned up documentation
- rebased on top of PLCA changes
- renamed ETHTOOL_STATS_SRC_* to ETHTOOL_MAC_STATS_SRC_*
v2 at:
https://patchwork.kernel.org/project/netdevbpf/cover/20230111161706.1465242-1-vladimir.oltean@nxp.com/

v1->v2:
I've decided to focus just on the MAC Merge layer for now, which is why
I am able to submit this patch set as non-RFC.
v1 (RFC) at:
https://patchwork.kernel.org/project/netdevbpf/cover/20220816222920.1952936-1-vladimir.oltean@nxp.com/

What is being introduced
------------------------

TL;DR: a MAC Merge layer as defined by IEEE 802.3-2018, clause 99
(interspersing of express traffic). This is controlled through ethtool
netlink (ETHTOOL_MSG_MM_GET, ETHTOOL_MSG_MM_SET). The raw ethtool
commands are posted here:
https://patchwork.kernel.org/project/netdevbpf/cover/20230111153638.1454687-1-vladimir.oltean@nxp.com/

The MAC Merge layer has its own statistics counters
(ethtool --include-statistics --show-mm swp0) as well as two member
MACs, the statistics of which can be queried individually, through a new
ethtool netlink attribute, corresponding to:

$ ethtool -I --show-pause eno2 --src aggregate
$ ethtool -S eno2 --groups eth-mac eth-phy eth-ctrl rmon -- --src pmac

The core properties of the MAC Merge layer are described in great detail
in patches 02/12 and 03/12. They can be viewed in "make htmldocs" format.

Devices for which the API is supported
--------------------------------------

I decided to start with the Ethernet switch on NXP LS1028A (Felix)
because of the smaller patch set. I also have support for the ENETC
controller pending.

I would like to get confirmation that the UAPI being proposed here will
not restrict any use cases known by other hardware vendors.

Why is support for preemptible traffic classes not here?
--------------------------------------------------------

There is legitimate concern whether the 802.1Q portion of the standard
(which traffic classes go to the eMAC and which to the pMAC) should be
modeled in Linux using tc or using another UAPI. I think that is
stalling the entire series, but should be discussed separately instead.
Removing FP adminStatus support makes me confident enough to submit this
patch set without an RFC tag (meaning: I wouldn't mind if it was merged
as is).

What is submitted here is sufficient for an LLDP daemon to do its job.
I've patched openlldp to advertise and configure frame preemption:
https://github.com/vladimiroltean/openlldp/tree/frame-preemption-v3

In case someone wants to try it out, here are some commands I've used.

# Configure the interfaces to receive and transmit LLDP Data Units
lldptool -L -i eno0 adminStatus=rxtx
lldptool -L -i swp0 adminStatus=rxtx
# Enable the transmission of certain TLVs on switch's interface
lldptool -T -i eno0 -V addEthCap enableTx=yes
lldptool -T -i swp0 -V addEthCap enableTx=yes
# Query LLDP statistics on switch's interface
lldptool -S -i swp0
# Query the received neighbor TLVs
lldptool -i swp0 -t -n -V addEthCap
Additional Ethernet Capabilities TLV
         Preemption capability supported
         Preemption capability enabled
         Preemption capability active
         Additional fragment size: 60 octets

So using this patch set, lldpad will be able to advertise and configure
frame preemption, but still, no data packet will be sent as preemptible
over the link, because there is no UAPI to control which traffic classes
are sent as preemptible and which as express.

Preemptable or preemptible?
---------------------------

IEEE 802.3 uses "preemptable" throughout. IEEE 802.1Q uses "preemptible"
throughout. Because the definition of "preemptible" falls under 802.1Q's
jurisdiction and 802.3 just references it, I went with the 802.1Q naming
even where supporting an 802.3 feature. Also, checkpatch agrees with this.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethtool: netlink: introduce ethnl_update_bool()

Due to the fact that the kernel-side data structures have been carried
over from the ioctl-based ethtool, we are now in the situation where we
have an ethnl_update_bool32() function, but the plain function that
operates on a boolean value kept in an actual u8 netlink attribute
doesn't exist.

With new ethtool features that are exposed solely over netlink, the
kernel data structures will use the "bool" type, so we will need this
kind of helper. Introduce it now; it's needed for things like
verify-disabled for the MAC merge configuration.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: fec: Use page_pool_put_full_page when freeing rx buffers

The page_pool_release_page was used when freeing rx buffers, and this
function just unmaps the page (if mapped) and does not recycle the page.
So after hundreds of down/up the eth0, the system will out of memory.
For more details, please refer to the following reproduce steps and
bug logs. To solve this issue and refer to the doc of page pool, the
page_pool_put_full_page should be used to replace page_pool_release_page.
Because this API will try to recycle the page if the page refcnt equal to
1. After testing 20000 times, the issue can not be reproduced anymore
(about testing 391 times the issue will occur on i.MX8MN-EVK before).

Reproduce steps:
Create the test script and run the script. The script content is as
follows:
LOOPS=20000
i=1
while [ $i -le $LOOPS ]
do
    echo "TINFO:ENET $curface up and down test $i times"
    org_macaddr=$(cat /sys/class/net/eth0/address)
    ifconfig eth0 down
    ifconfig eth0  hw ether $org_macaddr up
    i=$(expr $i + 1)
done
sleep 5
if cat /sys/class/net/eth0/operstate | grep 'up';then
    echo "TEST PASS"
else
    echo "TEST FAIL"
fi

Bug detail logs:
TINFO:ENET  up and down test 391 times
[  850.471205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL)
[  853.535318] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  853.541694] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[  870.590531] page_pool_release_retry() stalled pool shutdown 199 inflight 60 sec
[  931.006557] page_pool_release_retry() stalled pool shutdown 199 inflight 120 sec
TINFO:ENET  up and down test 392 times
[  991.426544] page_pool_release_retry() stalled pool shutdown 192 inflight 181 sec
[ 1051.838531] page_pool_release_retry() stalled pool shutdown 170 inflight 241 sec
[ 1093.751217] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL)
[ 1096.446520] page_pool_release_retry() stalled pool shutdown 308 inflight 60 sec
[ 1096.831245] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 1096.839092] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1112.254526] page_pool_release_retry() stalled pool shutdown 103 inflight 302 sec
[ 1156.862533] page_pool_release_retry() stalled pool shutdown 308 inflight 120 sec
[ 1172.674516] page_pool_release_retry() stalled pool shutdown 103 inflight 362 sec
[ 1217.278532] page_pool_release_retry() stalled pool shutdown 308 inflight 181 sec
TINFO:ENET  up and down test 393 times
[ 1233.086535] page_pool_release_retry() stalled pool shutdown 103 inflight 422 sec
[ 1277.698513] page_pool_release_retry() stalled pool shutdown 308 inflight 241 sec
[ 1293.502525] page_pool_release_retry() stalled pool shutdown 86 inflight 483 sec
[ 1338.110518] page_pool_release_retry() stalled pool shutdown 308 inflight 302 sec
[ 1353.918540] page_pool_release_retry() stalled pool shutdown 32 inflight 543 sec
[ 1361.179205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL)
[ 1364.255298] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 1364.263189] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1371.998532] page_pool_release_retry() stalled pool shutdown 310 inflight 60 sec
[ 1398.530542] page_pool_release_retry() stalled pool shutdown 308 inflight 362 sec
[ 1414.334539] page_pool_release_retry() stalled pool shutdown 16 inflight 604 sec
[ 1432.414520] page_pool_release_retry() stalled pool shutdown 310 inflight 120 sec
[ 1458.942523] page_pool_release_retry() stalled pool shutdown 308 inflight 422 sec
[ 1474.750521] page_pool_release_retry() stalled pool shutdown 16 inflight 664 sec
TINFO:ENET  up and down test 394 times
[ 1492.830522] page_pool_release_retry() stalled pool shutdown 310 inflight 181 sec
[ 1519.358519] page_pool_release_retry() stalled pool shutdown 308 inflight 483 sec
[ 1535.166545] page_pool_release_retry() stalled pool shutdown 2 inflight 724 sec
[ 1537.090278] eth_test2.sh invoked oom-killer: gfp_mask=0x400dc0(GFP_KERNEL_ACCOUNT|__GFP_ZERO), order=0, oom_score_adj=0
[ 1537.101192] CPU: 3 PID: 2379 Comm: eth_test2.sh Tainted: G         C         6.1.1+g56321e101aca #1
[ 1537.110249] Hardware name: NXP i.MX8MNano EVK board (DT)
[ 1537.115561] Call trace:
[ 1537.118005]  dump_backtrace.part.0+0xe0/0xf0
[ 1537.122289]  show_stack+0x18/0x40
[ 1537.125608]  dump_stack_lvl+0x64/0x80
[ 1537.129276]  dump_stack+0x18/0x34
[ 1537.132592]  dump_header+0x44/0x208
[ 1537.136083]  oom_kill_process+0x2b4/0x2c0
[ 1537.140097]  out_of_memory+0xe4/0x594
[ 1537.143766]  __alloc_pages+0xb68/0xd00
[ 1537.147521]  alloc_pages+0xac/0x160
[ 1537.151013]  __get_free_pages+0x14/0x40
[ 1537.154851]  pgd_alloc+0x1c/0x30
[ 1537.158082]  mm_init+0xf8/0x1d0
[ 1537.161228]  mm_alloc+0x48/0x60
[ 1537.164368]  alloc_bprm+0x7c/0x240
[ 1537.167777]  do_execveat_common.isra.0+0x70/0x240
[ 1537.172486]  __arm64_sys_execve+0x40/0x54
[ 1537.176502]  invoke_syscall+0x48/0x114
[ 1537.180255]  el0_svc_common.constprop.0+0xcc/0xec
[ 1537.184964]  do_el0_svc+0x2c/0xd0
[ 1537.188280]  el0_svc+0x2c/0x84
[ 1537.191340]  el0t_64_sync_handler+0xf4/0x120
[ 1537.195613]  el0t_64_sync+0x18c/0x190
[ 1537.199334] Mem-Info:
[ 1537.201620] active_anon:342 inactive_anon:10343 isolated_anon:0
[ 1537.201620]  active_file:54 inactive_file:112 isolated_file:0
[ 1537.201620]  unevictable:0 dirty:0 writeback:0
[ 1537.201620]  slab_reclaimable:2620 slab_unreclaimable:7076
[ 1537.201620]  mapped:1489 shmem:2473 pagetables:466
[ 1537.201620]  sec_pagetables:0 bounce:0
[ 1537.201620]  kernel_misc_reclaimable:0
[ 1537.201620]  free:136672 free_pcp:96 free_cma:129241
[ 1537.240419] Node 0 active_anon:1368kB inactive_anon:41372kB active_file:216kB inactive_file:5052kB unevictable:0kB isolated(anon):0kB isolated(file):0kB s
[ 1537.271422] Node 0 DMA free:541636kB boost:0kB min:30000kB low:37500kB high:45000kB reserved_highatomic:0KB active_anon:1368kB inactive_anon:41372kB actiB
[ 1537.300219] lowmem_reserve[]: 0 0 0 0
[ 1537.303929] Node 0 DMA: 1015*4kB (UMEC) 743*8kB (UMEC) 417*16kB (UMEC) 235*32kB (UMEC) 116*64kB (UMEC) 25*128kB (UMEC) 4*256kB (UC) 2*512kB (UC) 0*1024kBB
[ 1537.323938] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB
[ 1537.332708] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=32768kB
[ 1537.341292] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
[ 1537.349776] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=64kB
[ 1537.358087] 2939 total pagecache pages
[ 1537.361876] 0 pages in swap cache
[ 1537.365229] Free swap  = 0kB
[ 1537.368147] Total swap = 0kB
[ 1537.371065] 516096 pages RAM
[ 1537.373959] 0 pages HighMem/MovableOnly
[ 1537.377834] 17302 pages reserved
[ 1537.381103] 163840 pages cma reserved
[ 1537.384809] 0 pages hwpoisoned
[ 1537.387902] Tasks state (memory values in pages):
[ 1537.392652] [  pid  ]   uid  tgid total_vm      rss pgtables_bytes swapents oom_score_adj name
[ 1537.401356] [    201]   993   201     1130       72    45056        0             0 rpcbind
[ 1537.409772] [    202]     0   202     4529     1640    77824        0          -250 systemd-journal
[ 1537.418861] [    222]     0   222     4691      801    69632        0         -1000 systemd-udevd
[ 1537.427787] [    248]   994   248    20914      130    65536        0             0 systemd-timesyn
[ 1537.436884] [    497]     0   497      620       31    49152        0             0 atd
[ 1537.444938] [    500]     0   500      854       77    53248        0             0 crond
[ 1537.453165] [    503]   997   503     1470      160    49152        0          -900 dbus-daemon
[ 1537.461908] [    505]     0   505      633       24    40960        0             0 firmwared
[ 1537.470491] [    513]     0   513     2507      180    61440        0             0 ofonod
[ 1537.478800] [    514]   990   514    69640      137    81920        0             0 parsec
[ 1537.487120] [    533]     0   533      599       39    40960        0             0 syslogd
[ 1537.495518] [    534]     0   534     4546      148    65536        0             0 systemd-logind
[ 1537.504560] [    535]     0   535      690       24    45056        0             0 tee-supplicant
[ 1537.513564] [    540]   996   540     2769      168    61440        0             0 systemd-network
[ 1537.522680] [    566]     0   566     3878      228    77824        0             0 connmand
[ 1537.531168] [    645]   998   645     1538      133    57344        0             0 avahi-daemon
[ 1537.540004] [    646]   998   646     1461       64    57344        0             0 avahi-daemon
[ 1537.548846] [    648]   992   648      781       41    45056        0             0 rpc.statd
[ 1537.557415] [    650] 64371   650      590       23    45056        0             0 ninfod
[ 1537.565754] [    653] 61563   653      555       24    45056        0             0 rdisc
[ 1537.573971] [    655]     0   655   374569     2999   290816        0          -999 containerd
[ 1537.582621] [    658]     0   658     1311       20    49152        0             0 agetty
[ 1537.590922] [    663]     0   663     1529       97    49152        0             0 login
[ 1537.599138] [    666]     0   666     3430      202    69632        0             0 wpa_supplicant
[ 1537.608147] [    667]     0   667     2344       96    61440        0             0 systemd-userdbd
[ 1537.617240] [    677]     0   677     2964      314    65536        0           100 systemd
[ 1537.625651] [    679]     0   679     3720      646    73728        0           100 (sd-pam)
[ 1537.634138] [    687]     0   687     1289      403    45056        0             0 sh
[ 1537.642108] [    789]     0   789      970       93    45056        0             0 eth_test2.sh
[ 1537.650955] [   2355]     0  2355     2346       94    61440        0             0 systemd-userwor
[ 1537.660046] [   2356]     0  2356     2346       94    61440        0             0 systemd-userwor
[ 1537.669137] [   2358]     0  2358     2346       95    57344        0             0 systemd-userwor
[ 1537.678258] [   2379]     0  2379      970       93    45056        0             0 eth_test2.sh
[ 1537.687098] oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0,global_oom,task_memcg=/user.slice/user-0.slice/user@0.service,tas0
[ 1537.703009] Out of memory: Killed process 679 ((sd-pam)) total-vm:14880kB, anon-rss:2584kB, file-rss:0kB, shmem-rss:0kB, UID:0 pgtables:72kB oom_score_ad0
[ 1553.246526] page_pool_release_retry() stalled pool shutdown 310 inflight 241 sec

Fixes: 95698ff6177b ("net: fec: using page pool to manage RX buffers")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: shenwei wang <Shenwei.wang@nxp.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'sched_urgent_for_v6.2_rc6' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Borislav Petkov:

- Make sure the scheduler doesn't use stale frequency scaling values
   when latter get disabled due to a value error

- Fix a NULL pointer access on UP configs

- Use the proper locking when updating CPU capacity

* tag 'sched_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/aperfmperf: Erase stale arch_freq_scale values when disabling frequency invariance readings
  sched/core: Fix NULL pointer access fault in sched_setaffinity() with non-SMP configs
  sched/fair: Fixes for capacity inversion detection
  sched/uclamp: Fix a uninitialized variable warnings

Merge tag 'edac_urgent_for_v6.2_rc6' of git://git./linux/kernel/git/ras/ras

Pull EDAC fixes from Borislav Petkov:

- Respect user-supplied polling value in the EDAC device code

- Fix a use-after-free issue in qcom_edac

* tag 'edac_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/qcom: Do not pass llcc_driv_data as edac_device_ctl_info's pvt_info
EDAC/device: Respect any driver-supplied workqueue polling value

Merge tag 'perf_urgent_for_v6.2_rc6' of git://git./linux/kernel/git/tip/tip

Pull perf fix from Borislav Petkov:

- Add Emerald Rapids model support to more perf machinery

* tag 'perf_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/cstate: Add Emerald Rapids
perf/x86/intel: Add Emerald Rapids

Merge tag 'gfs2-v6.2-rc4-fix' of git://git./linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 writepage fix from Andreas Gruenbacher:

- Fix a regression introduced by commit "gfs2: stop using
generic_writepages in gfs2_ail1_start_one".

* tag 'gfs2-v6.2-rc4-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
Revert "gfs2: stop using generic_writepages in gfs2_ail1_start_one"

KVM: selftests: Make reclaim_period_ms input always be positive

reclaim_period_ms used to be positive only but the commit 0001725d0f9b
("KVM: selftests: Add atoi_positive() and atoi_non_negative() for input
validation") incorrectly changed it to non-negative validation.

Change validation to allow only positive input.

Fixes: 0001725d0f9b ("KVM: selftests: Add atoi_positive() and atoi_non_negative() for input validation")
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reported-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230111183408.104491-1-vipinsh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86/vmx: Do not skip segment attributes if unusable bit is set

When serializing and deserializing kvm_sregs, attributes of the segment
descriptors are stored by user space. For unusable segments,
vmx_segment_access_rights skips all attributes and sets them to 0.

This means we zero out the DPL (Descriptor Privilege Level) for unusable
entries.

Unusable segments are - contrary to their name - usable in 64bit mode and
are used by guests to for example create a linear map through the
NULL selector.

VMENTER checks if SS.DPL is correct depending on the CS segment type.
For types 9 (Execute Only) and 11 (Execute Read), CS.DPL must be equal to
SS.DPL [1].

We have seen real world guests setting CS to a usable segment with DPL=3
and SS to an unusable segment with DPL=3. Once we go through an sregs
get/set cycle, SS.DPL turns to 0. This causes the virtual machine to crash
reproducibly.

This commit changes the attribute logic to always preserve attributes for
unusable segments. According to [2] SS.DPL is always saved on VM exits,
regardless of the unusable bit so user space applications should have saved
the information on serialization correctly.

[3] specifies that besides SS.DPL the rest of the attributes of the
descriptors are undefined after VM entry if unusable bit is set. So, there
should be no harm in setting them all to the previous state.

[1] Intel SDM Vol 3C 26.3.1.2 Checks on Guest Segment Registers
[2] Intel SDM Vol 3C 27.3.2 Saving Segment Registers and Descriptor-Table
Registers
[3] Intel SDM Vol 3C 26.3.2.2 Loading Guest Segment Registers and
Descriptor-Table Registers

Cc: Alexander Graf <graf@amazon.de>
Cc: stable@vger.kernel.org
Signed-off-by: Hendrik Borghorst <hborghor@amazon.de>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221114164823.69555-1-hborghor@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: kvm: move declaration at the beginning of main()

Placing a declaration of evt_reset is pedantically invalid
according to the C standard.  While GCC does not really care
and only warns with -Wpedantic, clang ignores the declaration
altogether with an error:

x86_64/xen_shinfo_test.c:965:2: error: expected expression
        struct kvm_xen_hvm_attr evt_reset = {
        ^
x86_64/xen_shinfo_test.c:969:38: error: use of undeclared identifier evt_reset
        vm_ioctl(vm, KVM_XEN_HVM_SET_ATTR, &evt_reset);
                                            ^

Reported-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Reported-by: Sean Christopherson <seanjc@google.com>
Fixes: a79b53aaaab5 ("KVM: x86: fix deadlock for KVM_XEN_EVTCHN_RESET", 2022-12-28)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Revert "gfs2: stop using generic_writepages in gfs2_ail1_start_one"

Commit b2b0a5e97855 switched from generic_writepages() to
filemap_fdatawrite_wbc() in gfs2_ail1_start_one() on the path to
replacing ->writepage() with ->writepages() and eventually eliminating
the former.  Function gfs2_ail1_start_one() is called from
gfs2_log_flush(), our main function for flushing the filesystem log.

Unfortunately, at least as implemented today, ->writepage() and
->writepages() are entirely different operations for journaled data
inodes: while the former creates and submits transactions covering the
data to be written, the latter flushes dirty buffers out to disk.

With gfs2_ail1_start_one() now calling ->writepages(), we end up
creating filesystem transactions while we are in the course of a log
flush, which immediately deadlocks on the sdp->sd_log_flush_lock
semaphore.

Work around that by going back to how things used to work before commit
b2b0a5e97855 for now; figuring out a superior solution will take time we
don't have available right now.  However ...

Since the removal of generic_writepages() is imminent, open-code it
here.  We're already inside a blk_start_plug() ...  blk_finish_plug()
section here, so skip that part of the original generic_writepages().

This reverts commit b2b0a5e978552e348f85ad9c7568b630a5ede659.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>

Merge tag 'kvmarm-fixes-6.2-2' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.2, take #2

- Pass the correct address to mte_clear_page_tags() on initialising
a tagged page

- Plug a race against a GICv4.1 doorbell interrupt while saving
the vgic-v3 pending state.

Linux 6.2-rc5

Merge tag 'io_uring-6.2-2023-01-21' of git://git.kernel.dk/linux

Pull another io_uring fix from Jens Axboe:
"Just a single fix for a regression that happened in this release due
  to a poll change. Normally I would've just deferred it to next week,
  but since the original fix got picked up by stable, I think it's
  better to just send this one off separately.

  The issue is around the poll race fix, and how it mistakenly also got
  applied to multishot polling. Those don't need the race fix, and we
  should not be doing any reissues for that case. Exhaustive test cases
  were written and committed to the liburing regression suite for the
  reported issue, and additions for similar issues"

* tag 'io_uring-6.2-2023-01-21' of git://git.kernel.dk/linux:
  io_uring/poll: don't reissue in case of poll race on multishot request

Merge tag 'char-misc-6.2-rc5' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc and other subsystem driver fixes for
  6.2-rc5 to resolve a few reported issues. They include:

   - long time pending fastrpc fixes (should have gone into 6.1, my
     fault)

   - mei driver/bus fixes and new device ids

   - interconnect driver fixes for reported problems

   - vmci bugfix

   - w1 driver bugfixes for reported problems

  Almost all of these have been in linux-next with no reported problems,
  the rest have all passed 0-day bot testing in my tree and on the
  mailing lists where they have sat too long due to me taking a long
  time to catch up on my pending patch queue"

* tag 'char-misc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  VMCI: Use threaded irqs instead of tasklets
  misc: fastrpc: Pass bitfield into qcom_scm_assign_mem
  gsmi: fix null-deref in gsmi_get_variable
  misc: fastrpc: Fix use-after-free race condition for maps
  misc: fastrpc: Don't remove map on creater_process and device_release
  misc: fastrpc: Fix use-after-free and race in fastrpc_map_find
  misc: fastrpc: fix error code in fastrpc_req_mmap()
  mei: me: add meteor lake point M DID
  mei: bus: fix unlink on bus in error path
  w1: fix WARNING after calling w1_process()
  w1: fix deadloop in __w1_remove_master_device()
  comedi: adv_pci1760: Fix PWM instruction handling
  interconnect: qcom: rpm: Use _optional func for provider clocks
  interconnect: qcom: msm8996: Fix regmap max_register values
  interconnect: qcom: msm8996: Provide UFS clocks to A2NoC
  dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC

Merge tag 'driver-core-6.2-rc5' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
"Here are three small driver and kernel core fixes for 6.2-rc5. They
  include:

   - potential gadget fixup in do_prlimit

   - device property refcount leak fix

   - test_async_probe bugfix for reported problem"

* tag 'driver-core-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  prlimit: do_prlimit needs to have a speculation check
  driver core: Fix test_async_probe_init saves device in wrong array
  device property: fix of node refcount leak in fwnode_graph_get_next_endpoint()

Merge tag 'staging-6.2-rc5' of git://git./linux/kernel/git/gregkh/staging

Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for 6.2-rc5. It resolves a build
  issue reported and Fixed by Arnd in the vc04_services driver. It's
  been in linux-next this week with no reported problems"

* tag 'staging-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vchiq_arm: fix enum vchiq_status return types

Merge tag 'tty-6.2-rc5' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.2-rc5 that
  resolve a number of tiny reported issues and some new device ids. They
  include:

   - new device id for the exar serial driver

   - speakup tty driver bugfix

   - atmel serial driver baudrate fixup

   - stm32 serial driver bugfix and then revert as the bugfix broke the
     build. That will come back in a later pull request once it is all
     worked out properly.

   - amba-pl011 serial driver rs486 mode bugfix

   - qcom_geni serial driver bugfix

  Most of these have been in linux-next with no reported problems (well,
  other than the build breakage which generated the revert), the new
  device id passed 0-day testing"

* tag 'tty-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: exar: Add support for Sealevel 7xxxC serial cards
  Revert "serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler"
  tty: serial: qcom_geni: avoid duplicate struct member init
  serial: atmel: fix incorrect baudrate setup
  tty: fix possible null-ptr-defer in spk_ttyio_release
  serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  serial: amba-pl011: fix high priority character transmission in rs486 mode
  serial: pch_uart: Pass correct sg to dma_unmap_sg()
  tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer

Merge tag 'usb-6.2-rc5' of git://git./linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt fixes from Greg KH:
"Here are a number of small USB and Thunderbolt driver fixes and new
  device id changes for 6.2-rc5. Included in here are:

   - thunderbolt bugfixes for reported problems

   - new usb-serial driver ids added

   - onboard_hub usb driver fixes for much-reported problems

   - xhci bugfixes

   - typec bugfixes

   - ehci-fsl driver module alias fix

   - iowarrior header size fix

   - usb gadget driver fixes

  All of these, except for the iowarrior fix, have been in linux-next
  with no reported issues. The iowarrior fix passed the 0-day testing
  and is a one digit change based on a reported problem in the driver
  (which was written to a spec, not the real device that is now
  available)"

* tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
  USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100
  usb: host: ehci-fsl: Fix module alias
  usb: dwc3: fix extcon dependency
  usb: core: hub: disable autosuspend for TI TUSB8041
  USB: fix misleading usb_set_intfdata() kernel doc
  usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate()
  USB: gadget: Add ID numbers to configfs-gadget driver names
  usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail
  usb: gadget: g_webcam: Send color matching descriptor per frame
  usb: typec: altmodes/displayport: Use proper macro for pin assignment check
  usb: typec: altmodes/displayport: Fix pin assignment calculation
  usb: typec: altmodes/displayport: Add pin assignment helper
  usb: gadget: f_fs: Ensure ep0req is dequeued before free_request
  usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait
  usb: misc: onboard_hub: Move 'attach' work to the driver
  usb: misc: onboard_hub: Invert driver registration order
  usb: ucsi: Ensure connector delayed work items are flushed
  usb: musb: fix error return code in omap2430_probe()
  usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch)
  xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables
  ...

Merge tag 'kbuild-fixes-v6.2-3' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

- Hide LDFLAGS_vmlinux from decompressor Makefiles to fix error
   messages when GNU Make 4.4 is used.

- Fix 'make modules' build error when CONFIG_DEBUG_INFO_BTF_MODULES=y.

- Fix warnings emitted by GNU Make 4.4 in scripts/kconfig/Makefile.

- Support GNU Make 4.4 for scripts/jobserver-exec.

- Show clearer error message when kernel/gen_kheaders.sh fails due to
   missing cpio.

* tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kheaders: explicitly validate existence of cpio command
  scripts: support GNU make 4.4 in jobserver-exec
  kconfig: Update all declared targets
  scripts: rpm: make clear that mkspec script contains 4.13 feature
  init/Kconfig: fix LOCALVERSION_AUTO help text
  kbuild: fix 'make modules' error when CONFIG_DEBUG_INFO_BTF_MODULES=y
  kbuild: export top-level LDFLAGS_vmlinux only to scripts/Makefile.vmlinux
  init/version-timestamp.c: remove unneeded #include <linux/version.h>
  docs: kbuild: remove mention to dropped $(objtree) feature

ext4: deal with legacy signed xattr name hash values

We potentially have old hashes of the xattr names generated on systems
with signed 'char' types. Now that everybody uses '-funsigned-char',
those hashes will no longer match.

This only happens if you use xattrs names that have the high bit set,
which probably doesn't happen in practice, but the xfstest generic/454
shows it.

Instead of adding a new "signed xattr hash filesystem" bit and having to
deal with all the possible combinations, just calculate the hash both
ways if the first one fails, and always generate new hashes with the
proper unsigned char version.

Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202212291509.704a11c9-oliver.sang@intel.com
Link: https://lore.kernel.org/all/CAHk-=whUNjwqZXa-MH9KMmc_CpQpoFKFjAB9ZKHuu=TbsouT4A@mail.gmail.com/
Exposed-by: 3bc753c06dd0 ("kbuild: treat char as always unsigned")
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Theodore Ts'o <tytso@mit.edu>,
Cc: Jason Donenfeld <Jason@zx2c4.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

prlimit: do_prlimit needs to have a speculation check

do_prlimit() adds the user-controlled resource value to a pointer that
will subsequently be dereferenced. In order to help prevent this
codepath from being used as a spectre "gadget" a barrier needs to be
added after checking the range.

Reported-by: Jordy Zomer <jordyzomer@google.com>
Tested-by: Jordy Zomer <jordyzomer@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: GICv4.1: Fix race with doorbell on VPE activation/deactivation

To save the vgic LPI pending state with GICv4.1, the VPEs must all be
unmapped from the ITSs so that the sGIC caches can be flushed.
The opposite is done once the state is saved.

This is all done by using the activate/deactivate irqdomain callbacks
directly from the vgic code. Crutially, this is done without holding
the irqdesc lock for the interrupts that represent the VPE. And these
callbacks are changing the state of the irqdesc. What could possibly
go wrong?

If a doorbell fires while we are messing with the irqdesc state,
it will acquire the lock and change the interrupt state concurrently.
Since we don't hole the lock, curruption occurs in on the interrupt
state. Oh well.

While acquiring the lock would fix this (and this was Shanker's
initial approach), this is still a layering violation we could do
without. A better approach is actually to free the VPE interrupt,
do what we have to do, and re-request it.

It is more work, but this usually happens only once in the lifetime
of the VM and we don't really care about this sort of overhead.

Fixes: f66b7b151e00 ("KVM: arm64: GICv4.1: Try to save VLPI state in save_pending_tables")
Reported-by: Shanker Donthineni <sdonthineni@nvidia.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230118022348.4137094-1-sdonthineni@nvidia.com

KVM: arm64: Pass the actual page address to mte_clear_page_tags()

Commit d77e59a8fccd ("arm64: mte: Lock a page for MTE tag
initialisation") added a call to mte_clear_page_tags() in case a
prior mte_copy_tags_from_user() failed in order to avoid stale tags in
the guest page (it should have really been a separate commit).
Unfortunately, the argument passed to this function was the address of
the struct page rather than the actual page address. Fix this function
call.

Fixes: d77e59a8fccd ("arm64: mte: Lock a page for MTE tag initialisation")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230119170902.1574756-1-catalin.marinas@arm.com

net: fix UaF in netns ops registration error path

If net_assign_generic() fails, the current error path in ops_init() tries
to clear the gen pointer slot. Anyway, in such error path, the gen pointer
itself has not been modified yet, and the existing and accessed one is
smaller than the accessed index, causing an out-of-bounds error:

BUG: KASAN: slab-out-of-bounds in ops_init+0x2de/0x320
Write of size 8 at addr ffff888109124978 by task modprobe/1018

CPU: 2 PID: 1018 Comm: modprobe Not tainted 6.2.0-rc2.mptcp_ae5ac65fbed5+ #1641
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014
Call Trace:
  <TASK>
  dump_stack_lvl+0x6a/0x9f
  print_address_description.constprop.0+0x86/0x2b5
  print_report+0x11b/0x1fb
  kasan_report+0x87/0xc0
  ops_init+0x2de/0x320
  register_pernet_operations+0x2e4/0x750
  register_pernet_subsys+0x24/0x40
  tcf_register_action+0x9f/0x560
  do_one_initcall+0xf9/0x570
  do_init_module+0x190/0x650
  load_module+0x1fa5/0x23c0
  __do_sys_finit_module+0x10d/0x1b0
  do_syscall_64+0x58/0x80
  entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f42518f778d
Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48
       89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
       ff 73 01 c3 48 8b 0d cb 56 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007fff96869688 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 00005568ef7f7c90 RCX: 00007f42518f778d
RDX: 0000000000000000 RSI: 00005568ef41d796 RDI: 0000000000000003
RBP: 00005568ef41d796 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000
R13: 00005568ef7f7d30 R14: 0000000000040000 R15: 0000000000000000
  </TASK>

This change addresses the issue by skipping the gen pointer
de-reference in the mentioned error-path.

Found by code inspection and verified with explicit error injection
on a kasan-enabled kernel.

Fixes: d266935ac43d ("net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/cec4e0f3bb2c77ac03a6154a8508d3930beb5f0f.1674154348.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ethernet: renesas: rswitch: Fix ethernet-ports handling

If one of ports in the ethernet-ports was disabled, this driver
failed to probe all ports. So, fix it.

Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230120001959.1059850-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mana: Fix IRQ name - add PCI and queue number

The PCI and queue number info is missing in IRQ names.

Add PCI and queue number to IRQ names, to allow CPU affinity
tuning scripts to work.

Cc: stable@vger.kernel.org
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/1674161950-19708-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netlink: prevent potential spectre v1 gadgets

Most netlink attributes are parsed and validated from
__nla_validate_parse() or validate_nla()

    u16 type = nla_type(nla);

    if (type == 0 || type > maxtype) {
        /* error or continue */
    }

@type is then used as an array index and can be used
as a Spectre v1 gadget.

array_index_nospec() can be used to prevent leaking
content of kernel memory to malicious users.

This should take care of vast majority of netlink uses,
but an audit is needed to take care of others where
validation is not yet centralized in core netlink functions.

Fixes: bfa83a9e03cf ("[NETLINK]: Type-safe netlink messages/attributes interface")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230119110150.2678537-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'gpio-fixes-for-v6.2-rc5' of git://git./linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:

- fix a potential race condition and always set GPIOs used as interrupt
   source to input in gpio-mxc

- fix a GPIO ACPI-related issue with system suspend on Clevo NL5xRU

* tag 'gpio-fixes-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xRU
  gpiolib: acpi: Allow ignoring wake capability on pins that aren't in _AEI
  gpio: mxc: Always set GPIOs used as interrupt source to INPUT mode
  gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock

Merge tag '6.2-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:

- important fix for packet signature calculation error

- three fixes to correct DFS deadlock, and DFS refresh problem

- remove an unused DFS function, and duplicate tcon refresh code

- DFS cache lookup fix

- uninitialized rc fix

* tag '6.2-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: remove unused function
  cifs: do not include page data when checking signature
  cifs: fix return of uninitialized rc in dfs_cache_update_tgthint()
  cifs: handle cache lookup errors different than -ENOENT
  cifs: remove duplicate code in __refresh_tcon()
  cifs: don't take exclusive lock for updating target hints
  cifs: avoid re-lookups in dfs_cache_find()
  cifs: fix potential deadlock in cache_refresh_path()

Merge tag 'pinctrl-v6.2-2' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:

- Compilation fix for Sunplus sp7021

- Add some missing headers after a cleanup to the Nomadik driver

- Fix pull type and mux routes on Rockchip RK3568

* tag 'pinctrl-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: rockchip: fix mux route data for rk3568
  pinctrl: rockchip: fix reading pull type on rk3568
  pinctrl: nomadik: Add missing header(s)
  pinctrl: sp7021: fix unused function warning