Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block patches

# gpg: Signature made Fri 21 Feb 2014 21:42:24 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream: (54 commits)
  iotests: Mixed quorum child device specifications
  quorum: Simplify quorum_open()
  quorum: Add unit test.
  quorum: Add quorum_open() and quorum_close().
  quorum: Implement recursive .bdrv_recurse_is_first_non_filter in quorum.
  quorum: Add quorum_co_flush().
  quorum: Add quorum_invalidate_cache().
  quorum: Add quorum_getlength().
  quorum: Add quorum mechanism.
  quorum: Add quorum_aio_readv.
  blkverify: Extract qemu_iovec_clone() and qemu_iovec_compare() from blkverify.
  quorum: Add quorum_aio_writev and its dependencies.
  quorum: Create BDRVQuorumState and BlkDriver and do init.
  quorum: Create quorum.c, add QuorumChildRequest and QuorumAIOCB.
  check-qdict: Test termination of qdict_array_split()
  check-qdict: Adjust test for qdict_array_split()
  qdict: Extract non-QDicts in qdict_array_split()
  qemu-config: Sections must consist of keys
  qemu-iotests: Check qemu-img command line parsing
  qemu-img: Allow -o help with incomplete argument list
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/sstabellini/xen-140220' into staging

* remotes/sstabellini/xen-140220:
  xen_disk: fix io accounting
  Call pci_piix3_xen_ide_unplug from unplug_disks

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/bonzini/configure' into staging

* remotes/bonzini/configure:
  build: softmmu targets do not have a "main.o" file
  configure: Disable libtool if -fPIE does not work with it (bug #1257099)
  block: convert block drivers linked with libs to modules
  Makefile: introduce common-obj-m and block-obj-m for DSO
  Makefile: install modules with "make install"
  module: implement module loading
  rules.mak: introduce DSO rules
  darwin: do not use -mdynamic-no-pic
  block: use per-object cflags and libs
  rules.mak: allow per object cflags and libs
  rules.mak: fix $(obj) to a real relative path
  util: Split out exec_dir from os_find_datadir

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

configure: check that C++ compiler actually works

Check that the C++ compiler works with the C compiler; if it
does not, then don't pass CXX to the build process. This
fixes a regression where QEMU was no longer building if the
build environment didn't have a C++ compiler (introduced
in commit 3144f78b, which incorrectly assumed that rules.mak
would only see a non-empty $(CXX) if configure had actually
found a working C++ compiler).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reported-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Tested-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1392909016-14028-1-git-send-email-peter.maydell@linaro.org

iotests: Mixed quorum child device specifications

Add a test case to test 081 for mixing full option dicts and reference
strings of specifying the quorum child block devices through QMP.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

quorum: Simplify quorum_open()

Although it may not look like it, this patch simplifies quorum_open().
qdict_array_split() is now able to return QLists with different objects
than only QDicts, therefore it will now do all the work and
quorum_open() does not have to handle reference strings by itself.

This allows mixing full option dicts and reference strings for
specifying the child block devices of quorum; furthermore, it improves
handling of malformed specifications.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

quorum: Add unit test.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

quorum: Add quorum_open() and quorum_close().

Example of command line:

-drive if=virtio,driver=quorum,\
children.0.file.filename=1.raw,\
children.0.node-name=1.raw,\
children.0.driver=raw,\
children.1.file.filename=2.raw,\
children.1.node-name=2.raw,\
children.1.driver=raw,\
children.2.file.filename=3.raw,\
children.2.node-name=3.raw,\
children.2.driver=raw,\
vote-threshold=2

blkverify=on with vote-threshold=2 and two files can be passed to
emulate blkverify.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

quorum: Implement recursive .bdrv_recurse_is_first_non_filter in quorum.

This is used to activate quorum snapshot.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

quorum: Add quorum_co_flush().

Makes a vote to select error if any.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

quorum: Add quorum_invalidate_cache().

We really want that live migration works with quorum so implement
quorum_invalidate_cache().

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

quorum: Add quorum_getlength().

Check that every bs file returns the same length.
Otherwise, return -EIO to disable the quorum and
avoid length discrepancy.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

quorum: Add quorum mechanism.

This patchset enables the core of the quorum mechanism.
The num_children reads are compared to get the majority version and if this
version exists more than threshold times the guest won't see the error at all.

If a block is corrupted or if an error occurs during an IO or if the quorum
cannot be established QMP events are used to report to the management.

Use gnutls's SHA-256 to compare versions.

--enable-quorum must be used to enable the feature.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

quorum: Add quorum_aio_readv.

Add code to do num_children reads in parallel and cleanup the structures
afterwards.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

blkverify: Extract qemu_iovec_clone() and qemu_iovec_compare() from blkverify.

qemu_iovec_compare() will be used to compare IOs vectors in quorum blkverify
mode. The patch extracts these functions in order to factorize the code.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

quorum: Add quorum_aio_writev and its dependencies.

Writes are mirrored num_children times on num_children devices.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

quorum: Create BDRVQuorumState and BlkDriver and do init.

Create the structure holding the quorum settings and write the minimal block
driver instanciation boilerplate.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

quorum: Create quorum.c, add QuorumChildRequest and QuorumAIOCB.

Quorum is a block filter mirroring writes to num_children children.
For reads quorum reads each children and does a vote.
If more than vote_threshold versions are identical the quorum is reached and
this winning version is returned to the guest. So quorum prevents bit corruption.
For high availability purpose minority errors are reported via QMP but the guest
does not see them.

This patch creates the driver C source file and introduces the structures that
will be used in asynchronous reads and writes.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

check-qdict: Test termination of qdict_array_split()

qdict_array_split() should terminate if it encounters both an entry with
a key of "%u" and entries with keys prefixed "%u." for the same index.

This patch adds a test for this case.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

check-qdict: Adjust test for qdict_array_split()

Test the new functionality of qdict_array_split(), that is, splitting
off single objects.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

qdict: Extract non-QDicts in qdict_array_split()

Currently, qdict_array_split() only splits off entries with a key prefix
of "%u.", packing them into a new QDict. This patch makes it support
entries with the plain key "%u" as well, directly putting them into the
new QList without creating a QDict.

If there is both an entry with a key of "%u" and other entries with keys
prefixed "%u." (for the same index), the function simply terminates.

To do this, this patch also adds a static function which tests whether a
given QDict contains any keys with the given prefix. This is used to test
whether entries with a key prefixed "%u." do exist in the source QDict
without modifying it.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

qemu-config: Sections must consist of keys

In config_parse_qdict_section(), the QList returned by
qdict_array_split() is assumed to only contain QDicts. Currently, this
is true but it may (and will) change in the future. Therefore, check
whether the assumption actually holds.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

qemu-iotests: Check qemu-img command line parsing

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

qemu-img: Allow -o help with incomplete argument list

This patch allows using 'qemu-img $subcmd -o help' for the create,
convert and amend subcommands, without specifying the previously
required filename arguments.

Note that it's still allowed and meaningful to specify a filename: An
invocation like 'qemu-img create -o help sheepdog:foo' will also display
options that are provided by the Sheepdog driver.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

qemu-img amend: Support multiple -o options

Instead of ignoring all option values but the last one, multiple -o
options now have the same meaning as having a single option with all
settings in the order of their respective -o options.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

qemu-img convert: Support multiple -o options

Instead of ignoring all option values but the last one, multiple -o
options now have the same meaning as having a single option with all
settings in the order of their respective -o options.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

qemu-img create: Support multiple -o options

If you specified multiple -o options for qemu-img create, it would
silently ignore all but the last one. This patch fixes the problem.

Now multiple -o options has the same meaning as having a single option
with all settings in the order of their respective -o options.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

qemu-option: has_help_option() and is_valid_option_list()

has_help_option() checks if any help option ('help' or '?') occurs
anywhere in an option string, so that things like 'cluster_size=4k,help'
are recognised.

is_valid_option_list() ensures that the option list doesn't have options
with leading commas or trailing unescaped commas.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

vdi: say why an image is bad

Instead of just putting it in debugging output, we can now put the
value in an Error.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: do not abuse EMEDIUMTYPE

Returning "Wrong medium type" for an image that does not have a valid
header is a bit weird.  Improve the error by mentioning what format
was trying to open it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

vmdk: correctly propagate errors

Now that we can return the "right" errors, use the Error** parameter
to pass them back instead of just printing them.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

vmdk: do not try opening a file as both image and descriptor

This prepares for propagating errors from vmdk_open_sparse and
vmdk_open_desc_file up to the caller of vmdk_open.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

vmdk: push vmdk_read_desc up to caller

Currently, we just try reading a VMDK file as both image and descriptor.
This makes it hard to choose which of the two attempts gave the best error.
We'll decide in advance if the file looks like an image or a descriptor,
and this patch is the first step to that end.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

vmdk: extract vmdk_read_desc

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

vvfat: correctly propagate errors

Before:
    $ ./qemu-io-old
    qemu-io-old> open -r -o driver=vvfat,fat-type=24,dir=i386-softmmu
    Valid FAT types are only 12, 16 and 32
    qemu-io-old: can't open device (null): Could not open image: Invalid argument

After:
    $ ./qemu-io
    qemu-io> open -r -o driver=vvfat,fat-type=24,dir=i386-softmmu
    qemu-io: can't open device (null): Valid FAT types are only 12, 16 and 32

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

vhdx: correctly propagate errors

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

qed: correctly propagate errors

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

qcow: correctly propagate errors

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

curl: correctly propagate errors

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

cow: correctly propagate errors

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

gluster: correctly propagate errors

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

gluster: default scheme to gluster:// and host to localhost.

Currently, "gluster:///volname/img" and (using file. options)
"file.driver=gluster,file.filename=foo" will segfault.  Also,
"//host/volname/img" will be rejected, but it is a valid URL
that should be accepted just fine with "file.driver=gluster".
Accept all of these, by inferring missing transport and host
as TCP and localhost respectively.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

iscsi: correctly propagate errors in iscsi_open

Before:
    $ ./qemu-io-old
    qemu-io-old> open -r -o file.driver=iscsi,file.filename=foo
    Failed to parse URL : foo
    qemu-io-old: can't open device (null): Could not open 'foo': Invalid argument

After:
    $ ./qemu-io
    qemu-io> open -r -o file.driver=iscsi,file.filename=foo
    qemu-io: can't open device (null): Failed to parse URL : foo

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

iscsi: fix indentation

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

nbd: move socket wrappers to qemu-nbd

qemu-nbd is one of the few valid users of qerror_report_err.  Move
the error-reporting socket wrappers there.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

nbd: inline tcp_socket_incoming_spec into sole caller

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

nbd: correctly propagate errors

Before:
    $ ./qemu-io-old
    qemu-io-old> open -r -o file.driver=nbd
    one of path and host must be specified.
    qemu-io-old: can't open device (null): Could not open image: Invalid argument
    $ ./qemu-io-old
    qemu-io-old> open -r -o file.driver=nbd,file.host=foo,file.path=bar
    path and host may not be used at the same time.
    qemu-io-old: can't open device (null): Could not open image: Invalid argument

After:
    $ ./qemu-io
    qemu-io> open -r -o file.driver=nbd
    qemu-io: can't open device (null): one of path and host must be specified.
    $ ./qemu-io
    qemu-io> open -r -o file.driver=nbd,file.host=foo,file.path=bar
    qemu-io: can't open device (null): path and host may not be used at the same time.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

nbd: produce a better error if neither host nor port is passed

Before:
    $ qemu-io-old
    qemu-io-old> open -r -o file.driver=nbd
    qemu-io-old: can't open device (null): Could not open image: Invalid argument
    $ ./qemu-io-old
    qemu-io-old> open -r -o file.driver=nbd,file.host=foo,file.path=bar
    path and host may not be used at the same time.
    qemu-io-old: can't open device (null): Could not open image: Invalid argument

After:
    $ ./qemu-io
    qemu-io> open -r -o file.driver=nbd
    one of path and host must be specified.
    qemu-io: can't open device (null): Could not open image: Invalid argument
    $ ./qemu-io
    qemu-io> open -r -o file.driver=nbd,file.host=foo,file.path=bar
    path and host may not be used at the same time.
    qemu-io: can't open device (null): Could not open image: Invalid argument

Next patch will fix the error propagation.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Remove bdrv_open_image()'s force_raw option

This option is now unnecessary since specifying BDRV_O_PROTOCOL as flag
will do exactly the same.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Reuse success path from bdrv_open()

The fail and success paths of bdrv_file_open() may be further shortened
by reusing code already existent in bdrv_open(). This includes
bdrv_file_open() not taking the reference to options which allows the
removal of QDECREF(options) in that function.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Handle bs->options in bdrv_open() only

The fail paths of bdrv_file_open() and bdrv_open() naturally exhibit
similarities, thus it is possible to reuse the one from bdrv_open() and
shorten the one in bdrv_file_open() accordingly.

Also, setting bs->options in bdrv_file_open() is not necessary if it is
already done in bdrv_open().

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Remove bdrv_new() from bdrv_file_open()

Change bdrv_file_open() to take a simple pointer to an already existing
BDS instead of an indirect one. The BDS will be created in bdrv_open()
if necessary.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Reuse reference handling from bdrv_open()

Remove the reference parameter and the related handling code from
bdrv_file_open(), since it exists in bdrv_open() now as well.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Make bdrv_file_open() static

Add the bdrv_open() option BDRV_O_PROTOCOL which results in passing the
call to bdrv_file_open(). Additionally, make bdrv_file_open() static and
therefore bdrv_open() the only way to call it.

Consequently, all existing calls to bdrv_file_open() have to be adjusted
to use bdrv_open() with the BDRV_O_PROTOCOL flag instead.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Add reference parameter to bdrv_open()

Allow bdrv_open() to handle references to existing block devices just as
bdrv_file_open() is already capable of.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Change BDS parameter of bdrv_open() to **

Make bdrv_open() take a pointer to a BDS pointer, similarly to
bdrv_file_open(). If a pointer to a NULL pointer is given, bdrv_open()
will create a new BDS with an empty name; if the BDS pointer is not
NULL, that existing BDS will be reused (in the same way as bdrv_open()
already did).

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Fix bdrv_is_first_non_filter()

Consider top level BlockDriverStates as well.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Tested-by: Benoit Canet <benoit@irqsave.net>

qcow2: Set zero flag for discarded clusters

Instead of making the backing file contents visible again after a discard
request, set the zero flag if possible (i.e. on version >= 3).

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20140220' into staging

target-arm queue:
 * Fix a bug causing an assertion in the NVIC on ARMv7M models
 * More A64 Neon instructions
 * Refactor cpreg API to separate out access check functions, as
   groundwork for AArch64 system mode
 * Fix bug in linux-user A64 store-exclusive of XZR

# gpg: Signature made Thu 20 Feb 2014 11:12:57 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-target-arm-20140220: (30 commits)
  linux-user: AArch64: Fix exclusive store of the zero register
  target-arm: A64: Implement unprivileged load/store
  target-arm: A64: Implement narrowing three-reg-diff operations
  target-arm: A64: Implement the wide 3-reg-different operations
  target-arm: A64: Add most remaining three-reg-diff widening ops
  target-arm: A64: Add opcode comments to disas_simd_three_reg_diff
  target-arm: A64: Implement store-exclusive for system mode
  target-arm: Fix incorrect type for value argument to write_raw_cp_reg
  target-arm: Remove failure status return from read/write_raw_cp_reg
  target-arm: Remove unnecessary code now read/write fns can't fail
  target-arm: Drop success/fail return from cpreg read and write functions
  target-arm: Convert miscellaneous reginfo structs to accessfn
  target-arm: Convert generic timer reginfo to accessfn
  target-arm: Convert performance monitor reginfo to accessfn
  target-arm: Split cpreg access checks out from read/write functions
  target-arm: Stop underdecoding ARM946 PRBS registers
  target-arm: Log bad system register accesses with LOG_UNIMP
  target-arm: Remove unused ARMCPUState sr substruct
  target-arm: Restrict check_ap() use of S and R bits to v6 and earlier
  target-arm: Define names for SCTLR bits
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/stefanha/tags/qtest-monitor-process-pull-request' into staging

qtest resource cleanup pull request

# gpg: Signature made Wed 19 Feb 2014 14:46:34 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/qtest-monitor-process-pull-request:
  qtest: kill QEMU process on g_assert() failure
  qtest: make QEMU our direct child process
  qtest: drop unused child_pid field

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging

Tracing pull request

# gpg: Signature made Wed 19 Feb 2014 15:42:20 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/tracing-pull-request:
  trace-events: Fix typo in "offset"
  Add ust generated files to .gitignore
  Update documentation for LTTng ust tracing
  Adapt Makefiles to the new LTTng ust interface
  Modified the tracetool framework for LTTng 2.x
  Fix configure script for LTTng 2.x

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

This fixes a target-i386 emulation regression

# gpg: Signature made Wed 19 Feb 2014 15:42:12 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream:
  target-i386: Fix I/O bitmap checks for in/out

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/riku/linux-user-for-upstream' into staging

* remotes/riku/linux-user-for-upstream:
  linux-user: Fix error handling in target_to_host_semarray()
  linux-user: Implement BLKPG ioctl
  linux-user: Fix error handling in lock_iovec()
  linux-user/signal.c: Don't pass sigaction uninitialised sa_flags
  linux-user/elfload.c: Avoid calling g_free() on uninitialized data
  linux-user: sync syscall numbers upto 3.13

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tcg/i386: Fix build for systems without working cpuid.h (MacOSX, Win32)

Win32 doesn't have a cpuid.h, and MacOSX may have one but without
the __cpuid() function we use, which means that commit 9d2eec20
broke the build for those platforms. Fix this by tightening up
our configure cpuid.h check to test that the functions we need
are present, and adding some missing #ifdef guards in
tcg/i386/tcg-target.c.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>

xen_disk: fix io accounting

bdrv_acct_done was called unconditional. But in case the ioreq has no
segments there is no matching bdrv_acct_start call. This could lead to
bogus accounting values.

Found by code inspection.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>

Call pci_piix3_xen_ide_unplug from unplug_disks

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>

Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-3' into staging

- xhci improvements and fixes.
- uhci bugfix.
- cleanups.

# gpg: Signature made Tue 18 Feb 2014 15:48:10 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-usb-3:
  xhci: use DPRINTF() instead of fprintf(stderr, ...)
  xhci: switch debug printf to tracepoint
  xhci iso: allow for some latency
  xhci iso: fix time calculation
  uhci: invalidate queue on device address changes
  xhci: fix overflow in usb_xhci_post_load
  usb: Remove magic constants from device bmAttributes

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/rth/tcg-next' into staging

* remotes/rth/tcg-next:
  tcg/i386: Use SHLX/SHRX/SARX instructions
  tcg/i386: Use ANDN instruction
  tcg/i386: Add tcg_out_vex_modrm
  tcg/i386: Move TCG_CT_CONST_* to tcg-target.c
  disas/i386: Disassemble ANDN/SHLX/SHRX/SHAX
  tcg/optimize: Add more identity simplifications
  tcg/optimize: Optmize ANDC X,Y,Y to MOV X,0
  tcg/optimize: Simply some logical ops to NOT
  tcg/optimize: Handle known-zeros masks for ANDC
  tcg/optimize: add known-zero bits compute for load ops
  tcg/optimize: improve known-zero bits for 32-bit ops
  tcg/optimize: fix known-zero bits optimization
  tcg/optimize: fix known-zero bits for right shift ops
  tcg-arm: The shift count of op_rotl_i32 is in args[2] not args[1].
  TCG: Fix 32-bit host allocation typo

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging

QOM infrastructure fixes and device conversions

* QTest cleanups and test cases for PCI NICs
* NAND fix for "info qtree"
* Cleanup and extension of QOM machine tests
* IndustryPack test cases and conversion to QOM realize
* I2C cleanups
* Cleanups of legacy qdev properties

# gpg: Signature made Mon 17 Feb 2014 22:15:37 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/qom-devices-for-peter: (49 commits)
  qtest: Include system headers before user headers
  qapi: Refine human printing of sizes
  qdev: Use QAPI type names for properties
  qdev: Add enum property types to QAPI schema
  block: Handle "rechs" and "large" translation options
  qdev: Remove hex8/32/64 property types
  qdev: Remove most legacy printers
  qdev: Use human mode in "info qtree"
  qapi: Add human mode to StringOutputVisitor
  qdev: Inline qdev_prop_parse()
  qdev: Legacy properties are just strings
  qdev: Legacy properties are now read-only
  qdev: Remove legacy parsers for hex8/32/64
  qdev: Sizes are now parsed by StringInputVisitor
  qapi: Add size parser to StringInputVisitor
  qtest: Don't segfault with invalid -qtest option
  ipack: Move IndustryPack out of hw/char/
  ipoctal232: QOM parent field cleanup
  ipack: QOM parent field cleanup for IPackDevice
  ipack: QOM parent field cleanup for IPackBus
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

build: softmmu targets do not have a "main.o" file

Thus this rule is useless.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: Disable libtool if -fPIE does not work with it (bug #1257099)

Adjust TMPO and added TMPB, TMPL, and TMPA.  libtool needs the names
to be fixed (TMPB).

Add new functions do_libtool and libtool_prog.

Add check for broken gcc and libtool.

Signed-off-by: Don Slutz <dslutz@verizon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

block: convert block drivers linked with libs to modules

The converted block drivers are:

    curl
    iscsi
    rbd
    ssh
    glusterfs

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Makefile: introduce common-obj-m and block-obj-m for DSO

$(common-obj-m) will include $(block-obj-m), like $(common-obj-y) does
for $(block-obj-y).

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Makefile: install modules with "make install"

Install all the modules to ${MODDIR}.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

module: implement module loading

This patch adds loading, stamp checking and initialization of modules.

The init function of dynamic module is no longer directly called as
__attribute__((constructor)) in static linked version, it is called
only after passed the checking of presense of stamp symbol:

    qemu_stamp_$RELEASEHASH

where $RELEASEHASH is generated by hashing version strings and content
of configure script.

With this, modules built from a different tree/version/configure will
not be loaded.

The module loading code requires gmodule-2.0.

Modules are searched under
 - CONFIG_MODDIR
 - executable folder (to allow running qemu-{img,io} in the build
   directory)
 - ../ of executable folder (to allow running system emulator in the
   build directory)

Modules are linked under their subdir respectively, then copied to top
level of build directory for above convinience, e.g.:
    $(BUILD_DIR)/block/curl.so -> $(BUILD_DIR)/block-curl.so

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

rules.mak: introduce DSO rules

Add necessary rules and flags for shared object generation.
The new rules introduced here are:

1) %.o in $(common-obj-m) is compiled to %.o, then linked to %.so.

2) %.mo in $(common-obj-m) is the placeholder for %.so for pattern
matching in Makefile. It's linked to "-shared" with all its dependencies
(multiple *.o) as input. Which means the list of depended objects must
be specified in each sub-Makefile.objs:

    foo.mo-objs := bar.o baz.o qux.o

in the same style with foo.o-cflags and foo.o-libs. The objects here
will be prefixed with "$(obj)/" if it's a subdirectory Makefile.objs.

3) For all files ending up in %.so, the following is added automatically:

    foo.o-cflags += -fPIC -DBUILD_DSO

Also introduce --enable-modules in configure, the option will enable
support of shared object build. Otherwise objects are static linked to
executables.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

darwin: do not use -mdynamic-no-pic

While -mdynamic-no-pic can speed up the code somewhat, it is only used
on the legacy PowerPC Mac OS X, and I am not sure if anyone is still
testing that.  Disabling PIC can cause problems when enabling modules,
so do not do that.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

block: use per-object cflags and libs

No longer adds flags and libs for them to global variables, instead
create config-host.mak variables like FOO_CFLAGS and FOO_LIBS, which is
used as per object cflags and libs.

This removes unwanted dependencies from libcacard.

Signed-off-by: Fam Zheng <famz@redhat.com>
[Split from Fam's patch to enable modules. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

rules.mak: allow per object cflags and libs

Adds extract-libs in LINK to expand any "per object libs", the syntax to define
such a libs options is like:

        foo.o-libs := $(CURL_LIBS)

in block/Makefile.objs.

Similarly,

        foo.o-cflags := $(FOO_CFLAGS)

is also supported.

"foo.o" must be listed in a nested var (e.g. common-obj-y) to make the
option variables effective.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

rules.mak: fix $(obj) to a real relative path

Makefile.target includes rule.mak and unnested common-obj-y, then prefix
them with '../', this will ignore object specific QEMU_CFLAGS in subdir
Makefile.objs:

    $(obj)/curl.o: QEMU_CFLAGS += $(CURL_CFLAGS)

Because $(obj) here is './block', instead of '../block'. This doesn't
hurt compiling because we basically build all .o from top Makefile,
before entering Makefile.target, but it will affact arriving per-object
libs support.

The starting point of $(obj) is passed in as argument of unnest-vars, as
well as nested variables, so that different Makefiles can pass in a
right value.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

util: Split out exec_dir from os_find_datadir

With this change, main() calls qemu_init_exec_dir and uses argv[0] to
init exec_dir. The saved value can be retrieved with
qemu_get_exec_dir later. It will be reused by module loading.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into staging

* remotes/qmp-unstable/queue/qmp:
  monitor: Add object_add class argument completion.
  monitor: Add object_del id argument completion.
  monitor: Add device_add device argument completion.
  monitor: Add device_del id argument completion.
  qmp: expose list of supported character device backends
  Use error_is_set() only when necessary
  QMP: allow JSON dict arguments in qmp-shell
  hmp: migrate command (without -d) now blocks correctly

Conflicts:
blockdev.c

[PMM: resolved trivial conflict in blockdev.c]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

linux-user: AArch64: Fix exclusive store of the zero register

Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: A64: Implement unprivileged load/store

Implement the unprivileged load and store instructions.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>

target-arm: A64: Implement narrowing three-reg-diff operations

Implement the narrowing three-reg-diff operations: ADDHN,
RADDHN, SUBHN and RSUBHN.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>

target-arm: A64: Implement the wide 3-reg-different operations

Implement the wide three-reg-different operations:
SADDW, UADDW, SSUBW and USUBW.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>

target-arm: A64: Add most remaining three-reg-diff widening ops

Add the remainder of the 64x64->128 operations in the three-reg-diff
category except for PMULL, PMULL2.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>

target-arm: A64: Add opcode comments to disas_simd_three_reg_diff

The opcode switch in disas_simd_three_reg_diff() is missing the
customary comments indicating which cases correspond to which
instructions. Add them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>

target-arm: A64: Implement store-exclusive for system mode

System mode store-exclusive use a different code path to usermode ones;
implement this missing code, in a similar way to the 32 bit version.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>

target-arm: Fix incorrect type for value argument to write_raw_cp_reg

The write_raw_cp_reg's value argument should be a uint64_t, since
that's what all its callers hand it and what all the functions it
calls take. A (harmless) typo meant we were accidentally declaring
it as int64_t.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>

target-arm: Remove failure status return from read/write_raw_cp_reg

The read_raw_cp_reg and write_raw_cp_reg functions can now never
fail (in fact they should never have failed previously unless
there was a bug in a reginfo that meant no raw accessor was
provided for a might-trap register). This allows us to clean up
their prototypes so the write function returns void and the
read function returns the value read, which in turn lets us
simplify the callers.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>

target-arm: Remove unnecessary code now read/write fns can't fail

Now that cpreg read and write functions can't fail and throw an
exception, we can remove the code from the translator that synchronises
the guest PC in case an exception is thrown.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Drop success/fail return from cpreg read and write functions

All cpreg read and write functions now return 0, so we can clean up
their prototypes:
 * write functions return void
 * read functions return the value rather than taking a pointer
   to write the value to

This is a fairly mechanical change which makes only the bare
minimum set of changes to the callers of read and write functions.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>

target-arm: Convert miscellaneous reginfo structs to accessfn

Convert the remaining miscellaneous cases of reginfo read/write
functions returning EXCP_UDEF to use an accessfn instead:
TEEHBR, and the ATS address-translation operations.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Convert generic timer reginfo to accessfn

Convert the reginfo structs for the generic timer registers
to use access functions rather than returning EXCP_UDEF from
their read handlers. In some cases this allows us to remove
a read handler completely.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>

target-arm: Convert performance monitor reginfo to accessfn

Convert the performance monitor reginfo definitions to use
an accessfn rather than returning EXCP_UDEF from read and
write functions. This also allows us to fix a couple of XXX
cases where we weren't imposing the access restrictions on
RAZ/WI or constant registers.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Split cpreg access checks out from read/write functions

Several of the system registers handled via the ARMCPRegInfo
mechanism have access trap control bits controlling whether the
registers are accessible to lower privilege levels. Replace
the existing mechanism (allowing the read and write functions
to return EXCP_UDEF if access is denied) with a dedicated
"check access rights" function pointer in the ARMCPRegInfo.
This will allow us to simplify some of the register definitions,
which no longer need read/write functions purely to handle
the access checks.

We take the opportunity to define the return value from the
access checking function in a way that allows us to set the
correct exception syndrome information for exceptions taken
to AArch64 (which may need to distinguish access failures due
to a configurable trap or enable from other kinds of access
failure).

This commit defines the new mechanism but does not move any
of the registers across to use it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>

target-arm: Stop underdecoding ARM946 PRBS registers

The ARM946 has 8 PRBS (protection region base and size) registers.
Currently we implement these with a CP_ANY reginfo; however this
underdecodes (since there are 16 possible values of CRm but only
8 registers) and we catch the invalid values in the read and
write functions. However this causes issues with migration since
we only migrate the first of a wildcard register set, so we only
migrate c6_region[0]. It also makes it awkward to pull reginfo
access checks out into their own function.

Avoid all these problems by just defining separate reginfo structs
for each of the 8 registers; this also lets us avoid having any
read or write functions and will result in more efficient direct
field accesses from generated code.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Log bad system register accesses with LOG_UNIMP

Log guest attempts to access unimplemented system registers via
the LOG_UNIMP reporting mechanism (for both the 32 bit and 64 bit
instruction sets). This is particularly useful for debugging
problems where the guest is trying to use a system register that
QEMU doesn't implement.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>

target-arm: Remove unused ARMCPUState sr substruct

Remove the 'struct sr' from ARMCPUState -- it isn't actually used and is
a hangover from the original separate system register implementation used
by the SuSE linux-user-mode-only AArch64 target.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>