OSDN Git Service
David Hildenbrand [Thu, 12 Apr 2018 09:35:21 +0000 (11:35 +0200)]
s390x/kvm: cleanup calls to cpu_synchronize_state()
We have a call to cpu_synchronize_state() on every kvm_arch_handle_exit().
Let's remove the ones that are no longer needed.
Remaining places (for s390x) are in
- target/s390x/sigp.c, on the target CPU
- target/s390x/cpu.c:s390_cpu_get_crash_info()
While at it, use kvm_cpu_synchronize_state() instead of
cpu_synchronize_state() in KVM code. (suggested by Thomas Huth)
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20180412093521.2469-1-david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Greg Kurz [Mon, 9 Apr 2018 10:15:10 +0000 (12:15 +0200)]
vfio-ccw: introduce vfio_ccw_get_device()
A recent patch fixed leaks of the dynamically allocated vcdev->vdev.name
field in vfio_ccw_realize(), but we now have three freeing sites for it.
This is unfortunate and seems to indicate something is wrong with its
life cycle.
The root issue is that vcdev->vdev.name is set before vfio_get_device()
is called, which theoretically prevents to call vfio_put_device() to
do the freeing. Well actually, we could call it anyway because
vfio_put_base_device() is a nop if the device isn't attached, but this
would be confusing.
This patch hence moves all the logic of attaching the device, including
the "already attached" check, to a separate vfio_ccw_get_device() function,
counterpart of vfio_put_device(). While here, vfio_put_device() is renamed
to vfio_ccw_put_device() for consistency.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <
152326891065.266543.
9487977590811413472.stgit@bahia.lan>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Claudio Imbrenda [Thu, 8 Mar 2018 11:04:29 +0000 (12:04 +0100)]
s390x/sclp: extend SCLP event masks to 64 bits
Extend the SCLP event masks to 64 bits.
Notice that using any of the new bits results in a state that cannot be
migrated to an older version.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Message-Id: <
1520507069-22179-1-git-send-email-imbrenda@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Cornelia Huck [Thu, 29 Mar 2018 11:22:56 +0000 (13:22 +0200)]
s390x: introduce 2.13 compat machine
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Peter Maydell [Fri, 27 Apr 2018 11:27:59 +0000 (12:27 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/usb-
20180427-pull-request' into staging
usb: ccid bugfix, misc small improvements.
# gpg: Signature made Fri 27 Apr 2018 11:20:18 BST
# gpg: using RSA key
4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/usb-
20180427-pull-request:
ccid-card: include libcacard.h only
Fix libusb-1.0.22 deprecated libusb_set_debug with libusb_set_option
ccid: Fix dwProtocols advertisement of T=0
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 27 Apr 2018 10:39:31 +0000 (11:39 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/ui-
20180427-pull-request' into staging
vnc: fix use-after-free.
sdl2: gles support.
vfio-display: add reset support.
# gpg: Signature made Fri 27 Apr 2018 10:54:17 BST
# gpg: using RSA key
4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/ui-
20180427-pull-request:
ui: introduce vfio_display_reset
console: introduce dpy_gfx_update_full
sdl: Allow OpenGL ES context creation
sdl: Move DisplayOptions global to sdl2_console
qapi: Parameter gl of DisplayType now accept an enum
vnc: fix use-after-free
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 27 Apr 2018 09:49:23 +0000 (10:49 +0100)]
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.13-
20180427' into staging
ppc patch queue 2018-04-27
Here's the first batch of ppc patches for 2.13. This has a lot of
stuff that's accumulated during the 2.12 freeze. Highlights are:
* Many improvements for the Uninorth PCI host bridge for Mac
machine types
* Preliminary helpers improve handling of multiple backing
pagesizes (not strictly ppc related, but have acks and aimed to
allow future ppc changes)
* Cleanups to pseries cpu initialization
* Cleanups to hash64 MMU handling
* Assorted bugfixes and improvements
# gpg: Signature made Fri 27 Apr 2018 10:20:30 BST
# gpg: using RSA key
6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.13-
20180427: (49 commits)
Clear mem_path if we fall back to anonymous RAM allocation
spapr: Set compatibility mode before the rest of spapr_cpu_reset()
target/ppc: Don't bother with MSR_EP in cpu_ppc_set_papr()
spapr: Support ibm,dynamic-memory-v2 property
ppc: e500: switch E500 based machines to full machine definition
spapr: Add ibm,max-associativity-domains property
target/ppc: Fold slb_nr into PPCHash64Options
target/ppc: Get rid of POWERPC_MMU_VER() macros
target/ppc: Remove unnecessary POWERPC_MMU_V3 flag from mmu_model
target/ppc: Fold ci_large_pages flag into PPCHash64Options
target/ppc: Move 1T segment and AMR options to PPCHash64Options
target/ppc: Make hash64_opts field mandatory for 64-bit hash MMUs
target/ppc: Split page size information into a separate allocation
target/ppc: Move page size setup to helper function
target/ppc: Remove fallback 64k pagesize information
target/ppc: Avoid taking "env" parameter to mmu-hash64 functions
target/ppc: Pass cpu instead of env to ppc_create_page_sizes_prop()
target/ppc: Simplify cpu valid check in ppc_cpu_realize
target/ppc: Standardize instance_init and realize function names
spapr: drop useless dynamic sysbus device sanity check
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tina Zhang [Fri, 27 Apr 2018 09:11:06 +0000 (17:11 +0800)]
ui: introduce vfio_display_reset
During guest OS reboot, guest framebuffer is invalid. It will cause
bugs, if the invalid guest framebuffer is still used by host.
This patch is to introduce vfio_display_reset which is invoked
during vfio display reset. This vfio_display_reset function is used
to release the invalid display resource, disable scanout mode and
replace the invalid surface with QemuConsole's DisplaySurafce.
This patch can fix the GPU hang issue caused by gd_egl_draw during
guest OS reboot.
Changes v3->v4:
- Move dma-buf based display check into the vfio_display_reset().
(Gerd)
Changes v2->v3:
- Limit vfio_display_reset to dma-buf based vfio display. (Gerd)
Changes v1->v2:
- Use dpy_gfx_update_full() update screen after reset. (Gerd)
- Remove dpy_gfx_switch_surface(). (Gerd)
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Message-id:
1524820266-27079-3-git-send-email-tina.zhang@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tina Zhang [Fri, 27 Apr 2018 09:11:05 +0000 (17:11 +0800)]
console: introduce dpy_gfx_update_full
dpy_gfx_update_full is used to do the whole display surface update.
This function is proposed by Gerd Hoffmann.
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Message-id:
1524820266-27079-2-git-send-email-tina.zhang@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Elie Tournier [Fri, 13 Apr 2018 13:58:42 +0000 (14:58 +0100)]
sdl: Allow OpenGL ES context creation
Signed-off-by: Elie Tournier <elie.tournier@collabora.com>
Message-id:
20180413135842.21325-4-tournier.elie@gmail.com
[ kraxel: fix indent ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Michal Privoznik [Tue, 3 Apr 2018 10:34:37 +0000 (12:34 +0200)]
ccid-card: include libcacard.h only
When trying to build with latest libcacard-2.5.1, I hit the
following error:
In file included from hw/usb/ccid-card-passthru.c:12:0:
/usr/include/cacard/vscard_common.h:26:2: error: #warning "Only <libcacard.h> can be included directly" [-Werror=cpp]
#warning "Only <libcacard.h> can be included directly"
While it was fixed in libcacard upstream (so that individual
files can be included directly), it doesn't make much sense.
Let's switch to including the main libcacard.h and also require
at least libcacard-2.5.1 which introduced it. It's available
since late 2015.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id:
3c36db1dc0702763ebb7966cc27428ed67d43804.
1522751624.git.mprivozn@redhat.com
[ kraxel: fix include path ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
John Thomson [Thu, 5 Apr 2018 13:20:46 +0000 (23:20 +1000)]
Fix libusb-1.0.22 deprecated libusb_set_debug with libusb_set_option
libusb-1.0.22 marked libusb_set_debug deprecated
it is replaced with
libusb_set_option(libusb_context, LIBUSB_OPTION_LOG_LEVEL, libusb_log_level);
details here: https://github.com/libusb/libusb/commit/
539f22e2fd916558d11ab9a66f10f461c5593168
Warning here:
CC hw/usb/host-libusb.o
/builds/xen/src/qemu-xen/hw/usb/host-libusb.c: In function 'usb_host_init':
/builds/xen/src/qemu-xen/hw/usb/host-libusb.c:250:5: error: 'libusb_set_debug' is deprecated: Use libusb_set_option instead [-Werror=deprecated-declarations]
libusb_set_debug(ctx, loglevel);
^~~~~~~~~~~~~~~~
In file included from /builds/xen/src/qemu-xen/hw/usb/host-libusb.c:40:0:
/usr/include/libusb-1.0/libusb.h:1300:18: note: declared here
void LIBUSB_CALL libusb_set_debug(libusb_context *ctx, int level);
^~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make: *** [/builds/xen/src/qemu-xen/rules.mak:66: hw/usb/host-libusb.o] Error 1
make: Leaving directory '/builds/xen/src/xen/tools/qemu-xen-build'
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Message-id:
20180405132046.4968-1-git@johnthomson.fastmail.com.au
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Jason Andryuk [Fri, 20 Apr 2018 18:32:19 +0000 (14:32 -0400)]
ccid: Fix dwProtocols advertisement of T=0
Commit
d7d218ef02d87c637d20d64da8f575d434ff6f78 attempted to change
dwProtocols to only advertise support for T=0 and not T=1. The change
was incorrect as it changed 0x00000003 to 0x00010000.
lsusb -v in a linux guest shows:
"dwProtocols 65536 (Invalid values detected)", though the
smart card could still be accessed. Windows 7 does not detect inserted
smart cards and logs the the following Error in the Event Logs:
Source: Smart Card Service
Event ID: 610
Smart Card Reader 'QEMU QEMU USB CCID 0' rejected IOCTL SET_PROTOCOL:
Incorrect function. If this error persists, your smart card or reader
may not be functioning correctly
Command Header: 03 00 00 00
Setting to 0x00000001 fixes the Windows issue.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Message-id:
20180420183219.20722-1-jandryuk@gmail.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
David Gibson [Thu, 19 Apr 2018 07:19:11 +0000 (17:19 +1000)]
Clear mem_path if we fall back to anonymous RAM allocation
If the -mem-path option is set, we attempt to map the guest's RAM from a
file in the given path; it's usually used to back guest RAM with hugepages.
If we're unable to (e.g. not enough free hugepages) then we fall back to
allocating normal anonymous pages. This behaviour can be surprising, but a
comment in allocate_system_memory_nonnuma() suggests it's legacy behaviour
we can't change.
What really isn't ok, though, is that in this case we leave mem_path set.
That means functions which attempt to determine the pagesize of main RAM
can erroneously think it is hugepage based on the requested path, even
though it's not.
This is particular bad for the pseries machine type. KVM HV limitations
mean the guest can't use pagesizes larger than the host page size used to
back RAM. That means that such a fallback, rather than merely giving
poorer performance than expected will cause the guest to freeze up early in
boot as it attempts to use large page mappings that can't work.
This patch addresses the problem by clearing the mem_path variable when we
fall back to anonymous pages, meaning that subsequent attempts to
determine the RAM page size will get an accurate result.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David Gibson [Thu, 5 Apr 2018 05:49:23 +0000 (15:49 +1000)]
spapr: Set compatibility mode before the rest of spapr_cpu_reset()
Although the order doesn't really matter at the moment, it's possible
other initializastions could depend on the compatiblity mode, so make sure
we set it first in spapr_cpu_reset().
While we're at it drop the test against first_cpu. Setting the compat mode
to the value it already has is redundant, but harmless, so we might as well
make a small simplification to the code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
David Gibson [Fri, 13 Apr 2018 04:54:34 +0000 (14:54 +1000)]
target/ppc: Don't bother with MSR_EP in cpu_ppc_set_papr()
cpu_ppc_set_papr() removes the EP and HV bits from the MSR mask. While
removing the HV bit makes sense (a cpu in PAPR mode should never be
emulated in hypervisor mode), the EP bit is just bizarre. Although it's
true that a papr mode guest shouldn't be able to change the exception
prefix, the MSR[EP] bit doesn't even exist on the cpus supported for PAPR
mode, so it's pointless to do anything with it here.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Bharata B Rao [Thu, 19 Apr 2018 06:47:35 +0000 (12:17 +0530)]
spapr: Support ibm,dynamic-memory-v2 property
The new property ibm,dynamic-memory-v2 allows memory to be represented
in a more compact manner in device tree.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Igor Mammedov [Wed, 18 Apr 2018 14:28:02 +0000 (16:28 +0200)]
ppc: e500: switch E500 based machines to full machine definition
Convert PPCE500Params to PCCE500MachineClass which it essentially is,
and introduce PCCE500MachineState to keep track of E500 specific
state instead of adding global variables or extra parameters to
functions when we need to keep data beyond machine init
(i.e. make it look like typical fully defined machine).
It's pretty shallow conversion instead of currently used trivial
DEFINE_MACHINE() macro. It adds extra 60LOC of boilerplate code
of full machine definition.
The patch on top[1] will use PCCE500MachineState to keep track of
platform_bus device and add E500Plate specific machine class
to use HOTPLUG_HANDLER for explicitly initializing dynamic
sysbus devices at the time they are added instead of delaying
it to machine done time by platform_bus_init_notify() which is
being removed.
1) <
1523551221-11612-3-git-send-email-imammedo@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Serhii Popovych [Wed, 11 Apr 2018 18:41:59 +0000 (14:41 -0400)]
spapr: Add ibm,max-associativity-domains property
Now recent kernels (i.e. since linux-stable commit
a346137e9142
("powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes")
support this property to mark initially memory-less NUMA nodes as "possible"
to allow further memory hot-add to them.
Advertise this property for pSeries machines to let guest kernels detect
maximum supported node configuration and benefit from kernel side change
when hot-add memory to specific, possibly empty before, NUMA node.
Signed-off-by: Serhii Popovych <spopovyc@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David Gibson [Thu, 29 Mar 2018 07:29:38 +0000 (18:29 +1100)]
target/ppc: Fold slb_nr into PPCHash64Options
The env->slb_nr field gives the size of the SLB (Segment Lookaside Buffer).
This is another static-after-initialization parameter of the specific
version of the 64-bit hash MMU in the CPU. So, this patch folds the field
into PPCHash64Options with the other hash MMU options.
This is a bit more complicated that the things previously put in there,
because slb_nr was foolishly included in the migration stream. So we need
some of the usual dance to handle backwards compatible migration.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
David Gibson [Fri, 23 Mar 2018 05:48:43 +0000 (16:48 +1100)]
target/ppc: Get rid of POWERPC_MMU_VER() macros
These macros were introduced to deal with the fact that the mmu_model
field has bit flags mixed in with what's otherwise an enum of various mmu
types.
We've now eliminated all those flags except for one, and that one -
POWERPC_MMU_64 - is already included/compared in the MMU_VER macros. So,
we can get rid of those macros and just directly compare mmu_model values
in the places it was used.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
David Gibson [Fri, 23 Mar 2018 05:42:45 +0000 (16:42 +1100)]
target/ppc: Remove unnecessary POWERPC_MMU_V3 flag from mmu_model
The only place we test this flag is in conjunction with
ppc64_use_proc_tbl(). That checks for the LPCR_UPRT bit, which we already
ensure can't be set except on a machine with a v3 MMU (i.e. POWER9).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
David Gibson [Fri, 23 Mar 2018 03:32:48 +0000 (14:32 +1100)]
target/ppc: Fold ci_large_pages flag into PPCHash64Options
The ci_large_pages boolean in CPUPPCState is only relevant to 64-bit hash
MMU machines, indicating whether it's possible to map large (> 4kiB) pages
as cache-inhibitied (i.e. for IO, rather than memory). Fold it as another
flag into the PPCHash64Options structure.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
David Gibson [Fri, 23 Mar 2018 03:11:07 +0000 (14:11 +1100)]
target/ppc: Move 1T segment and AMR options to PPCHash64Options
Currently env->mmu_model is a bit of an unholy mess of an enum of distinct
MMU types, with various flag bits as well. This makes which bits of the
field should be compared pretty confusing.
Make a start on cleaning that up by moving two of the flags bits -
POWERPC_MMU_1TSEG and POWERPC_MMU_AMR - which are specific to the 64-bit
hash MMU into a new flags field in PPCHash64Options structure.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
David Gibson [Fri, 23 Mar 2018 02:59:20 +0000 (13:59 +1100)]
target/ppc: Make hash64_opts field mandatory for 64-bit hash MMUs
Currently some cpus set the hash64_opts field in the class structure, with
specific details of their variant of the 64-bit hash mmu. For the
remaining cpus with that mmu, ppc_hash64_realize() fills in defaults.
But there are only a couple of cpus that use those fallbacks, so just have
them to set the has64_opts field instead, simplifying the logic.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
David Gibson [Fri, 23 Mar 2018 02:31:52 +0000 (13:31 +1100)]
target/ppc: Split page size information into a separate allocation
env->sps contains page size encoding information as an embedded structure.
Since this information is specific to 64-bit hash MMUs, split it out into
a separately allocated structure, to reduce the basic env size for other
cpus. Along the way we make a few other cleanups:
* Rename to PPCHash64Options which is more in line with qemu name
conventions, and reflects that we're going to merge some more hash64
mmu specific details in there in future. Also rename its
substructures to match qemu conventions.
* Move structure definitions to the mmu-hash64.[ch] files.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
David Gibson [Fri, 23 Mar 2018 02:07:48 +0000 (13:07 +1100)]
target/ppc: Move page size setup to helper function
Initialization of the env->sps structure at the end of instance_init is
specific to the 64-bit hash MMU, so move the code into a helper function
in mmu-hash64.c.
We also create a corresponding function to be called at finalize time -
it's empty for now, but we'll need it shortly.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
David Gibson [Fri, 23 Mar 2018 00:24:28 +0000 (11:24 +1100)]
target/ppc: Remove fallback 64k pagesize information
CPU definitions for cpus with the 64-bit hash MMU can include a table of
available pagesizes. If this isn't supplied ppc_cpu_instance_init() will
fill it in a fallback table based on the POWERPC_MMU_64K bit in mmu_model.
However, it turns out all the cpus which support 64K pages already include
an explicit table of page sizes, so there's no point to the fallback table
including 64k pages.
That removes the only place which tests POWERPC_MMU_64K, so we can remove
it. Which in turn allows some logic to be removed from
kvm_fixup_page_sizes().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
David Gibson [Thu, 22 Mar 2018 05:49:28 +0000 (16:49 +1100)]
target/ppc: Avoid taking "env" parameter to mmu-hash64 functions
In most cases we prefer to pass a PowerPCCPU rather than the (embedded)
CPUPPCState.
For ppc_hash64_update_{rmls,vrma}() change to take "cpu" instead of "env".
For ppc_hash64_set_{dsi,isi}() remove the redundant "env" parameter.
In theory this makes more work for the functions, but since "cs", "cpu"
and "env" are related by at most constant offsets, the compiler should be
able to optimize out the difference at effectively zero cost.
helper_*() functions are left alone - since they're more closely tied to
the TCG generated code, passing "env" is still the standard there.
While we're there, fix an incorrect indentation.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
David Gibson [Thu, 22 Mar 2018 05:18:40 +0000 (16:18 +1100)]
target/ppc: Pass cpu instead of env to ppc_create_page_sizes_prop()
As a rule we prefer to pass PowerPCCPU instead of CPUPPCState, and this
change will make some things simpler later on.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
David Gibson [Fri, 23 Mar 2018 01:55:04 +0000 (12:55 +1100)]
target/ppc: Simplify cpu valid check in ppc_cpu_realize
The #if isn't necessary, because there's a suitable one inside
ppc_cpu_is_valid(). We've already filtered for suitable cpu models in the
functions that search and register them. So by the time we get to realize
having an invalid one indicates a code error, not a user error, so an
assert() is more appropriate than error_setg().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
David Gibson [Wed, 21 Mar 2018 04:30:13 +0000 (15:30 +1100)]
target/ppc: Standardize instance_init and realize function names
Because of the various hooks called some variant on "init" - and the rather
greater number that used to exist, I'm always wondering when a function
called simply "*_init" or "*_initfn" will be called.
To make it easier on myself, and maybe others, rename the instance_init
hooks for ppc cpus to *_instance_init(). While we're at it rename the
realize time hooks to *_realize() (from *_realizefn()) which seems to be
the more common current convention.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Greg Kurz [Wed, 11 Apr 2018 15:01:20 +0000 (17:01 +0200)]
spapr: drop useless dynamic sysbus device sanity check
Since commit
7da79a167aa11, the machine class init function registers
dynamic sysbus device types it supports. Passing an unsupported device
type on the command line causes QEMU to exit with an error message
just after machine init.
It is hence not needed to do the same sanity check at machine reset.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Serhii Popovych [Wed, 11 Apr 2018 18:42:00 +0000 (14:42 -0400)]
Revert "spapr: Don't allow memory hotplug to memory less nodes"
This reverts commit
b556854bd8524c26b8be98ab1bfdf0826831e793.
Leave change @node type from uint32_t to to int from reverted commit
because node < 0 is always false.
Note that implementing capability or some trick to detect if guest
kernel does not support hot-add to memory: this returns previous
behavour where memory added to first non-empty node.
Signed-off-by: Serhii Popovych <spopovyc@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Wed, 11 Apr 2018 17:46:06 +0000 (19:46 +0200)]
spapr: drop useless sanity check in spapr_irq_alloc*()
Both spapr_irq_alloc() and spapr_irq_alloc_block() have an errp
parameter, but they don't use it if XICS hasn't been initialized
yet.
This is doubly wrong:
- all callers do pass a non-null Error **, ie, they expect an error
to be propagated in case of failure
- XICS obviously needs to be initialized before anything starts allocating
IRQs
So this patch turns the check into an assert.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David Gibson [Tue, 3 Apr 2018 05:05:45 +0000 (15:05 +1000)]
Add host_memory_backend_pagesize() helper
There are a couple places (one generic, one target specific) where we need
to get the host page size associated with a particular memory backend. I
have some upcoming code which will add another place which wants this. So,
for convenience, add a helper function to calculate this.
host_memory_backend_pagesize() returns the host pagesize for a given
HostMemoryBackend object.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
David Gibson [Tue, 3 Apr 2018 04:55:11 +0000 (14:55 +1000)]
Make qemu_mempath_getpagesize() accept NULL
qemu_mempath_getpagesize() gets the effective (host side) page size for
a block of memory backed by an mmap()ed file on the host. It requires
the mem_path parameter to be non-NULL.
This ends up meaning all the callers need a different case for handling
anonymous memory (for memory-backend-ram or default memory with -mem-path
is not specified).
We can make all those callers a little simpler by having
qemu_mempath_getpagesize() accept NULL, and treat that as the anonymous
memory case.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
David Gibson [Thu, 29 Mar 2018 07:34:22 +0000 (18:34 +1100)]
spapr: Introduce pseries-2.13 machine type
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
BALATON Zoltan [Sun, 25 Mar 2018 23:54:28 +0000 (01:54 +0200)]
target/ppc: Fix reserved bit mask of dstst instruction
According to the Vector/SIMD extension documentation bit 6 that is
currently masked is valid (listed as transient bit) but bits 7 and 8
should be reserved instead. Fix the mask to match this.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Michael Matz [Fri, 23 Feb 2018 17:29:56 +0000 (17:29 +0000)]
ppc: Fix size of ppc64 xer register
The normal gdb definition of the XER registers is only 32 bit,
and that's what the current version of power64-core.xml also
says (seems copied from gdb's). But qemu's idea of the XER register
is target_ulong (in CPUPPCState, ppc_gdb_register_len and
ppc_cpu_gdb_read_register)
That mismatch leads to the following message when attaching
with gdb:
Truncated register 32 in remote 'g' packet
(and following on that qemu stops responding). The simple fix is
to say the truth in the .xml file. But the better fix is to
actually make it 32bit on the wire, as old gdbs don't support
XML files for describing registers. Also the XER state in qemu
doesn't seem to use the high 32 bits, so sending it off to gdb
doesn't seem worthwhile.
Signed-off-by: Michael Matz <matz@suse.de>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Tue, 6 Mar 2018 20:31:00 +0000 (20:31 +0000)]
uninorth: rename UNINState to UNINHostState
The existing UNINState actually represents the PCI/AGP host bridge stage so
rename it accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Tue, 6 Mar 2018 20:30:59 +0000 (20:30 +0000)]
uninorth: move PCI IO (ISA) memory region into the uninorth device
Do this for both the uninorth main and uninorth u3 AGP buses, using the main
PCI bus for each machine (this ensures the IO addresses still match those
used by OpenBIOS).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Tue, 6 Mar 2018 20:30:58 +0000 (20:30 +0000)]
uninorth: use object link to pass OpenPIC object to uninorth
Now that the OpenPIC is wired up via the board, we can now remove our temporary
PIC qdev pointer property and replace it with an object link instead.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Tue, 6 Mar 2018 20:30:57 +0000 (20:30 +0000)]
uninorth: remove obsolete pci_pmac_u3_init() function
Instead wire up the PCI/AGP host bridges in mac_newworld.c. Now this is complete
it is possible to move the initialisation of the PCI hole alias into
pci_u3_agp_init().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Tue, 6 Mar 2018 20:30:56 +0000 (20:30 +0000)]
uninorth: remove obsolete pci_pmac_init() function
Instead wire up the PCI/AGP host bridges in mac_newworld.c. Now this is complete
it is possible to move the initialisation of the PCI hole alias into
pci_unin_main_init().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Tue, 6 Mar 2018 20:30:55 +0000 (20:30 +0000)]
uninorth: enable internal PCI host bridge
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Tue, 6 Mar 2018 20:30:54 +0000 (20:30 +0000)]
uninorth: fix PCI and AGP bus mixup
Somewhere in the history of time, the initialisation of the PCI buses for the
AGP and PCI host bridges got mixed up in that the PCI host bridge was
creating an instance of the AGP PCI bus, and the AGP PCI bus was missing.
Swap the PCI host bridge over to use the correct PCI bus (including setting
the kMacRISCPCIAddressSelect register used by MacOS X) and add the missing
reference to the AGP PCI bus.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Tue, 6 Mar 2018 20:30:53 +0000 (20:30 +0000)]
uninorth: move PCI host bridge bus initialisation into device realize
Since the IO address space is fixed to use the standard system IO address
space then we can also use the opportunity to remove the address_space_io
parameter from pci_pmac_init() and pci_pmac_u3_init().
Note we also move the default mac99 PCI bus to the end of the initialisation
list so that it becomes the default destination for any devices specified
via -device without an explicit PCI bus provided.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Tue, 6 Mar 2018 20:30:52 +0000 (20:30 +0000)]
uninorth: introduce temporary pic_irqs device property
This is in preparation for moving the PCI bus wiring inside the uninorth
host bridge devices. In the future it will be possible to remove this once the
PICs have been switched to use qdev GPIOs.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Tue, 6 Mar 2018 20:30:51 +0000 (20:30 +0000)]
uninorth: move PCI mmio memory region initialisation into init function
Whilst we are here, rename the memory regions to better reflect whether they
belong to either a PCI or an AGP bus.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Tue, 6 Mar 2018 22:01:59 +0000 (22:01 +0000)]
mac_oldworld: move wiring of macio IRQs to macio_oldworld_realize()
Since the macio device has a link to the PIC device, we can now wire up the
IRQs directly via qdev GPIOs rather than having to use an intermediate array.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Tue, 6 Mar 2018 22:01:58 +0000 (22:01 +0000)]
mac_oldworld: remove pics IRQ array and wire up macio to heathrow directly
Introduce constants for the pre-defined Old World IRQs to help keep things
readable.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Tue, 6 Mar 2018 22:01:57 +0000 (22:01 +0000)]
grackle: move PCI IO (ISA) memory region into the grackle device
This simplifies the Old World machine to simply mapping the ISA memory region
into the main address space.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Tue, 6 Mar 2018 22:01:56 +0000 (22:01 +0000)]
grackle: remove deprecated pci_grackle_init() function
Instead wire up the grackle device inside the Mac Old World machine.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Tue, 6 Mar 2018 22:01:55 +0000 (22:01 +0000)]
grackle: general tidy-up and QOMify
This is the first step towards removing the old-style pci_grackle_init()
function. Following on from the previous commit we can now pass the heathrow
device as an object link and wire up the heathrow IRQs via qdev GPIOs.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Tue, 6 Mar 2018 22:01:54 +0000 (22:01 +0000)]
heathrow: remove obsolete heathow_init() function
Instead wire up heathrow to the CPU and grackle PCI host using qdev GPIOs.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Tue, 6 Mar 2018 20:30:50 +0000 (20:30 +0000)]
uninorth: alter pci_pmac_init() and pci_pmac_u3_init() to return uninorth device
This is in preparation for moving the device wiring into the New World machine.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Tue, 6 Mar 2018 20:30:49 +0000 (20:30 +0000)]
uninorth: move uninorth definitions into uninorth.h
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
[dwg: Added hw/hw.h #include as suggested by Philippe Mathieu-Daudé]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Tue, 6 Mar 2018 20:30:48 +0000 (20:30 +0000)]
uninorth: remove stray PCIBus realize from mac_newworld.c
After QOMification this is clearly no longer needed (and possibly hasn't been
for some time).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Tue, 6 Mar 2018 20:30:47 +0000 (20:30 +0000)]
uninorth: QOMify PCI and AGP host bridges
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Tue, 6 Mar 2018 20:30:46 +0000 (20:30 +0000)]
uninorth: remove second set of uninorth token registers
Commit
593c181160: "PPC: Newworld: Add second uninorth control register set"
added a second set of uninorth registers at 0xf3000000.
Testing MacOS 9.2 to MacOS X 10.4 reveals no accesses to this address and I
can't find any reference to it in Apple's Core99.cpp source so I'm assuming
that this was the result of another bug that has now been fixed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Tue, 6 Mar 2018 20:30:45 +0000 (20:30 +0000)]
uninorth: trivial style fixups
This makes sure we keep patchew/checkpatch happy during the remainder of this
patchset.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Elie Tournier [Fri, 13 Apr 2018 13:58:41 +0000 (14:58 +0100)]
sdl: Move DisplayOptions global to sdl2_console
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Elie Tournier <elie.tournier@collabora.com>
Message-id:
20180413135842.21325-3-tournier.elie@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Elie Tournier [Fri, 13 Apr 2018 13:58:40 +0000 (14:58 +0100)]
qapi: Parameter gl of DisplayType now accept an enum
v2: Rebase on top of master
v3: Fix the json format (Eric Blake)
Fix a comparison issue (Gerd Hoffmann)
Signed-off-by: Elie Tournier <elie.tournier@collabora.com>
Message-id:
20180413135842.21325-2-tournier.elie@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 20 Apr 2018 08:48:19 +0000 (10:48 +0200)]
vnc: fix use-after-free
When vnc_client_read() return value is -1
vs is not valid any more.
Fixes:
d49b87f0d1e0520443a990fc610d0f02bc63c556
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id:
20180420084820.3873-1-kraxel@redhat.com
Peter Maydell [Thu, 26 Apr 2018 18:22:09 +0000 (19:22 +0100)]
Merge remote-tracking branch 'remotes/iwj/tags/for-upstream.depriv-2' into staging
xen: xen-domid-restrict improvements
# gpg: Signature made Thu 26 Apr 2018 19:11:22 BST
# gpg: using RSA key
E3E3392348B50D39
# gpg: Good signature from "Ian Jackson (new general purpose key) <ijackson@chiark.greenend.org.uk>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 559A E46C 2D6B 6D32 65E7 CBA1 E3E3 3923 48B5 0D39
* remotes/iwj/tags/for-upstream.depriv-2:
configure: do_compiler: Dump some extra info under bash
os-posix: cleanup: Replace perror with error_report
os-posix: cleanup: Replace fprintf with error_report in remaining call sites
xen: Expect xenstore write to fail when restricted
xen: Remove now-obsolete xen_xc_domain_add_to_physmap
xen: Use newly added dmops for mapping VGA memory
os-posix: Provide new -runas <uid>:<gid> facility
os-posix: cleanup: Replace fprintfs with error_report in change_process_uid
xen: destroy_hvm_domain: Try xendevicemodel_shutdown
xen: move xc_interface compatibility fallback further up the file
xen: destroy_hvm_domain: Move reason into a variable
xen: defer call to xen_restrict until just before os_setup_post
xen: restrict: use xentoolcore_restrict_all
xen: link against xentoolcore
AccelClass: Introduce accel_setup_post
checkpatch: Add xendevicemodel_handle to the list of types
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ian Jackson [Mon, 25 Sep 2017 15:41:03 +0000 (16:41 +0100)]
configure: do_compiler: Dump some extra info under bash
This makes it much easier to find a particular thing in config.log.
We have to use the ${BASH_LINENO[*]} syntax which is a syntax error in
other shells, so test what shell we are running and use eval.
The extra output is only printed if configure is run with bash. On
systems where /bin/sh is not bash, it is necessary to say bash
./configure to get the extra debug info in the log.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Kent R. Spillner <kspillner@acm.org>
CC: Janosch Frank <frankja@linux.vnet.ibm.com>
CC: Thomas Huth <thuth@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Ian Jackson [Mon, 16 Apr 2018 14:16:23 +0000 (15:16 +0100)]
os-posix: cleanup: Replace perror with error_report
perror() is defined to fprintf(stderr,...). HACKING says
fprintf(stderr,...) is wrong. So perror() is too.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Daniel P. Berrange <berrange@redhat.com>
CC: Michael Tokarev <mjt@tls.msk.ru>
CC: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Ian Jackson [Mon, 16 Apr 2018 14:15:51 +0000 (15:15 +0100)]
os-posix: cleanup: Replace fprintf with error_report in remaining call sites
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Daniel P. Berrange <berrange@redhat.com>
CC: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Ross Lagerwall [Mon, 5 Mar 2018 10:07:46 +0000 (10:07 +0000)]
xen: Expect xenstore write to fail when restricted
Saving the current state to xenstore may fail when running restricted
(in particular, after a migration). Therefore, don't report the error or
exit when running restricted. Toolstacks that want to allow running
QEMU restricted should instead make use of QMP events to listen for
state changes.
CC: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Ian Jackson [Fri, 9 Mar 2018 16:08:55 +0000 (16:08 +0000)]
xen: Remove now-obsolete xen_xc_domain_add_to_physmap
The last user was just removed; remove this function, accordingly.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Ross Lagerwall [Mon, 23 Oct 2017 09:27:27 +0000 (10:27 +0100)]
xen: Use newly added dmops for mapping VGA memory
Xen unstable (to be in 4.11) has two new dmops, relocate_memory and
pin_memory_cacheattr. Use these to set up the VGA memory, replacing the
previous calls to libxc. This allows the VGA console to work properly
when QEMU is running restricted (-xen-domid-restrict).
Wrapper functions are provided to allow QEMU to work with older versions
of Xen.
Tweak the error handling while making this change:
* Report pin_memory_cacheattr errors.
* Report errors even when DEBUG_HVM is not set. This is useful for
trying to understand why VGA is not working, since otherwise it just
fails silently.
* Fix the return values when an error occurs. The functions now
consistently return -1 and set errno.
CC: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Ian Jackson [Fri, 15 Sep 2017 17:10:44 +0000 (18:10 +0100)]
os-posix: Provide new -runas <uid>:<gid> facility
This allows the caller to specify a uid and gid to use, even if there
is no corresponding password entry. This will be useful in certain
Xen configurations.
We don't support just -runas <uid> because: (i) deprivileging without
calling setgroups would be ineffective (ii) given only a uid we don't
know what gid we ought to use (since uids may eppear in multiple
passwd file entries with different gids).
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Daniel P. Berrange <berrange@redhat.com>
CC: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Ian Jackson [Mon, 16 Apr 2018 14:08:03 +0000 (15:08 +0100)]
os-posix: cleanup: Replace fprintfs with error_report in change_process_uid
I'm going to be editing this function and it makes sense to clean up
this style problem in advance.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Daniel P. Berrange <berrange@redhat.com>
CC: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Ian Jackson [Fri, 15 Sep 2017 16:51:52 +0000 (17:51 +0100)]
xen: destroy_hvm_domain: Try xendevicemodel_shutdown
xc_interface_open etc. is not going to work if we have dropped
privilege, but xendevicemodel_shutdown will if everything is new
enough.
xendevicemodel_shutdown is only availabe in Xen 4.10 and later, so
provide a stub for earlier versions.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Ian Jackson [Tue, 3 Oct 2017 17:51:05 +0000 (18:51 +0100)]
xen: move xc_interface compatibility fallback further up the file
We are going to want to use the dummy xendevicemodel_handle type in
new stub functions in the CONFIG_XEN_CTRL_INTERFACE_VERSION < 41000
section. So we need to provide that definition, or (as applicable)
include the appropriate header, earlier in the file.
(Ideally the newer compatibility layers would be at the bottom of the
file, so that they can naturally benefit from the compatibility layers
for earlier version. But that's rather too much for this series.)
No functional change.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Ian Jackson [Fri, 15 Sep 2017 16:50:47 +0000 (17:50 +0100)]
xen: destroy_hvm_domain: Move reason into a variable
We are going to want to reuse this.
No functional change.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Ian Jackson [Fri, 15 Sep 2017 15:02:24 +0000 (16:02 +0100)]
xen: defer call to xen_restrict until just before os_setup_post
We need to restrict *all* the control fds that qemu opens. Looking in
/proc/PID/fd shows there are many; their allocation seems scattered
throughout Xen support code in qemu.
We must postpone the restrict call until roughly the same time as qemu
changes its uid, chroots (if applicable), and so on.
There doesn't seem to be an appropriate hook already. The RunState
change hook fires at different times depending on exactly what mode
qemu is operating in.
And it appears that no-one but the Xen code wants a hook at this phase
of execution. So, introduce a bare call to a new function
xen_setup_post, just before os_setup_post. Also provide the
appropriate stub for when Xen compilation is disabled.
We do the restriction before rather than after os_setup_post, because
xen_restrict may need to open /dev/null, and os_setup_post might have
called chroot.
Currently this does not work with migration, because when running as
the Xen device model qemu needs to signal to the toolstack that it is
ready. It currently does this using xenstore, and for incoming
migration (but not for ordinary startup) that happens after
os_setup_post.
It is correct that this happens late: we want the incoming migration
stream to be processed by a restricted qemu. The fix for this will be
to do the startup notification a different way, without using
xenstore. (QMP is probably a reasonable choice.)
So for now this restriction feature cannot be used in conjunction with
migration. (Note that this is not a regression in this patch, because
previously the -xen-restrict-domid call was, in fact, simply
ineffective!) We will revisit this in the Xen 4.11 release cycle.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86)
CC: Richard Henderson <rth@twiddle.net> (maintainer:X86)
CC: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
CC: Michael S. Tsirkin <mst@redhat.com> (supporter:PC)
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Ian Jackson [Fri, 15 Sep 2017 15:03:14 +0000 (16:03 +0100)]
xen: restrict: use xentoolcore_restrict_all
And insist that it works.
Drop individual use of xendevicemodel_restrict and
xenforeignmemory_restrict. These are not actually effective in this
version of qemu, because qemu has a large number of fds open onto
various Xen control devices.
The restriction arrangements are still not right, because the
restriction needs to be done very late - after qemu has opened all of
its control fds.
xentoolcore_restrict_all and xentoolcore.h are available in Xen 4.10
and later, only. Provide a compatibility stub. And drop the
compatibility stubs for the old functions.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Anthony PERARD [Mon, 25 Sep 2017 15:01:48 +0000 (16:01 +0100)]
xen: link against xentoolcore
Xen libraries in 4.10 include a new xentoolcore library. This
contains the xentoolcore_restrict_all function which we are about to
want to use.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Ian Jackson [Fri, 9 Mar 2018 12:02:50 +0000 (12:02 +0000)]
AccelClass: Introduce accel_setup_post
This is called just before os_setup_post. Currently none of the
accelerators provide this hook, but the Xen one is going to provide
one in a moment.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Ian Jackson [Thu, 8 Mar 2018 18:07:26 +0000 (18:07 +0000)]
checkpatch: Add xendevicemodel_handle to the list of types
This avoids checkpatch misparsing (as statements) long function
definitions or declarations, which sometimes start with constructs
like this:
static inline int xendevicemodel_relocate_memory(
xendevicemodel_handle *dmod, domid_t domid, ...
The type xendevicemodel_handle does not conform to Qemu CODING_STYLE,
which would suggest CamelCase. However, it is a type defined by the
Xen Project in xen.git. It would be possible to introduce a typedef
to allow the qemu code to refer to it by a differently-spelled name,
but that would obfuscate more than it would clarify.
CC: Eric Blake <eblake@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Peter Maydell [Fri, 20 Apr 2018 14:52:49 +0000 (15:52 +0100)]
vl.c: new function serial_max_hds()
Create a new function serial_max_hds() which returns the number of
serial ports defined by the user. This is needed only by spapr.
This allows us to remove the MAX_SERIAL_PORTS define.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id:
20180420145249.32435-14-peter.maydell@linaro.org
Peter Maydell [Fri, 20 Apr 2018 14:52:48 +0000 (15:52 +0100)]
vl.c: Remove compile time limit on number of serial ports
Instead of having a fixed sized global serial_hds[] array,
use a local dynamically reallocated one, so we don't have
a compile time limit on how many serial ports a system has.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id:
20180420145249.32435-13-peter.maydell@linaro.org
Peter Maydell [Fri, 20 Apr 2018 14:52:47 +0000 (15:52 +0100)]
superio: Don't use MAX_SERIAL_PORTS for serial port limit
The superio device has a limit on the number of serial
ports it supports which is really only there because
it has a fixed-size array serial[]. This limit isn't
related particularly to the global MAX_SERIAL_PORTS limit,
so use a different #define for it.
(In practice the users of superio only ever want 2 serial ports.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id:
20180420145249.32435-12-peter.maydell@linaro.org
Peter Maydell [Fri, 20 Apr 2018 14:52:46 +0000 (15:52 +0100)]
serial-isa: Use MAX_ISA_SERIAL_PORTS instead of MAX_SERIAL_PORTS
The ISA serial port handling in serial-isa.c imposes a limit
of 4 serial ports. This is because we only know of 4 IO port
and IRQ settings for them, and is unrelated to the generic
MAX_SERIAL_PORTS limit, though they happen to both be set at
4 currently.
Use a new MAX_ISA_SERIAL_PORTS wherever that is the correct
limit to be checking against.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id:
20180420145249.32435-11-peter.maydell@linaro.org
Peter Maydell [Fri, 20 Apr 2018 14:52:45 +0000 (15:52 +0100)]
hw/char/exynos4210_uart.c: Remove unneeded handling of NULL chardev
The handling of NULL chardevs in exynos4210_uart_create() is now
all unnecessary: we don't need to create 'null' chardevs, and we
don't need to enforce a bounds check on serial_hd().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id:
20180420145249.32435-10-peter.maydell@linaro.org
Peter Maydell [Fri, 20 Apr 2018 14:52:44 +0000 (15:52 +0100)]
Remove checks on MAX_SERIAL_PORTS that are just bounds checks
Remove checks on MAX_SERIAL_PORTS that were just checking whether
they were within bounds for the serial_hds[] array and falling
back to NULL if not. This isn't needed with the serial_hd()
function, which returns NULL for all indexes beyond what the
user set up.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id:
20180420145249.32435-9-peter.maydell@linaro.org
Peter Maydell [Fri, 20 Apr 2018 14:52:43 +0000 (15:52 +0100)]
Change references to serial_hds[] to serial_hd()
Change all the uses of serial_hds[] to go via the new
serial_hd() function. Code change produced with:
find hw -name '*.[ch]' | xargs sed -i -e 's/serial_hds\[\([^]]*\)\]/serial_hd(\1)/g'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id:
20180420145249.32435-8-peter.maydell@linaro.org
Peter Maydell [Fri, 20 Apr 2018 14:52:42 +0000 (15:52 +0100)]
vl.c: Provide accessor function serial_hd() for serial_hds[] array
Provide an accessor function serial_hd() to return the Chardev
(if any) associated with the numbered serial port. This will
be used to replace direct accesses to the serial_hds[] array,
so that calling code doesn't need to care about the size of
that array.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id:
20180420145249.32435-7-peter.maydell@linaro.org
Peter Maydell [Fri, 20 Apr 2018 14:52:41 +0000 (15:52 +0100)]
hw/xtensa/xtfpga.c: Don't create "null" chardevs for serial devices
Following commit
12051d82f004024, UART devices should handle
being passed a NULL pointer chardev, so we don't need to
create "null" backends in board code. Remove the code that
does this and updates serial_hds[].
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id:
20180420145249.32435-6-peter.maydell@linaro.org
Peter Maydell [Fri, 20 Apr 2018 14:52:40 +0000 (15:52 +0100)]
hw/mips/mips_malta: Don't create "null" chardevs for serial devices
Following commit
12051d82f004024, UART devices should handle
being passed a NULL pointer chardev, so we don't need to
create "null" backends in board code. Remove the code that
does this and updates serial_hds[].
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id:
20180420145249.32435-5-peter.maydell@linaro.org
Peter Maydell [Fri, 20 Apr 2018 14:52:39 +0000 (15:52 +0100)]
hw/mips/boston.c: Don't create "null" chardevs for serial devices
Following commit
12051d82f004024, UART devices should handle
being passed a NULL pointer chardev, so we don't need to
create "null" backends in board code. Remove the code that
does this and updates serial_hds[].
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id:
20180420145249.32435-4-peter.maydell@linaro.org
Peter Maydell [Fri, 20 Apr 2018 14:52:38 +0000 (15:52 +0100)]
hw/arm/fsl-imx*: Don't create "null" chardevs for serial devices
Following commit
12051d82f004024, UART devices should handle
being passed a NULL pointer chardev, so we don't need to
create "null" backends in board code. Remove the code that
does this and updates serial_hds[].
(fsl-imx7.c was already written this way.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id:
20180420145249.32435-3-peter.maydell@linaro.org
Peter Maydell [Fri, 20 Apr 2018 14:52:37 +0000 (15:52 +0100)]
hw/char/serial: Allow disconnected chardevs
Currently the serial.c realize code has an explicit check that it is not
connected to a disconnected backend (ie one with a NULL chardev).
This isn't what we want -- you should be able to create a serial device
even if it isn't attached to anything. Remove the check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id:
20180420145249.32435-2-peter.maydell@linaro.org
Peter Maydell [Thu, 26 Apr 2018 10:56:57 +0000 (11:56 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-
20180426' into staging
target-arm queue:
* xilinx_spips: Correct SNOOP_NONE state when flushing the txfifo
* timer/aspeed: fix vmstate version id
* hw/arm/aspeed_soc: don't use vmstate_register_ram_global for SRAM
* hw/arm/aspeed: don't make 'boot_rom' region 'nomigrate'
* hw/arm/highbank: don't make sysram 'nomigrate'
* hw/arm/raspi: Don't bother setting default_cpu_type
* PMU emulation: some minor bugfixes and preparation for
support of other events than just the cycle counter
* target/arm: Use v7m_stack_read() for reading the frame signature
* target/arm: Remove stale TODO comment
* arm: always start from first_cpu when registering loader cpu reset callback
* device_tree: Increase FDT_MAX_SIZE to 1 MiB
# gpg: Signature made Thu 26 Apr 2018 11:46:31 BST
# gpg: using RSA key
3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-
20180426:
xilinx_spips: Correct SNOOP_NONE state when flushing the txfifo
timer/aspeed: fix vmstate version id
hw/arm/aspeed_soc: don't use vmstate_register_ram_global for SRAM
hw/arm/aspeed: don't make 'boot_rom' region 'nomigrate'
hw/arm/highbank: don't make sysram 'nomigrate'
hw/arm/raspi: Don't bother setting default_cpu_type
target/arm: Make PMOVSCLR and PMUSERENR 64 bits wide
target/arm: Fix bitmask for PMCCFILTR writes
target/arm: Allow EL change hooks to do IO
target/arm: Add pre-EL change hooks
target/arm: Support multiple EL change hooks
target/arm: Fetch GICv3 state directly from CPUARMState
target/arm: Mask PMU register writes based on PMCR_EL0.N
target/arm: Treat PMCCNTR as alias of PMCCNTR_EL0
target/arm: Check PMCNTEN for whether PMCCNTR is enabled
target/arm: Use v7m_stack_read() for reading the frame signature
target/arm: Remove stale TODO comment
arm: always start from first_cpu when registering loader cpu reset callback
device_tree: Increase FDT_MAX_SIZE to 1 MiB
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 26 Apr 2018 10:48:20 +0000 (11:48 +0100)]
Open 2.13 development tree
Unfortunately I forgot to do this before applying the merge
in commit
8e383d19b44863556, so that commit will incorrectly
claim to be 2.12 even though it isn't in the official 2.12
release. Oops.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Sai Pavan Boddu [Thu, 26 Apr 2018 10:04:40 +0000 (11:04 +0100)]
xilinx_spips: Correct SNOOP_NONE state when flushing the txfifo
SNOOP_NONE state handle is moved above in the if ladder, as it's same
as SNOOP_STRIPPING during data cycles.
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id:
1524119244-1240-1-git-send-email-saipava@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cédric Le Goater [Thu, 26 Apr 2018 10:04:39 +0000 (11:04 +0100)]
timer/aspeed: fix vmstate version id
commit
1d3e65aa7ac5 ("hw/timer: Add value matching support to
aspeed_timer") increased the vmstate version of aspeed.timer because
the state had changed, but it also bumped the version of the
VMSTATE_STRUCT_ARRAY under the aspeed.timerctrl which did not need to.
Change back this version to fix migration.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id:
20180423101433.17759-1-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 26 Apr 2018 10:04:39 +0000 (11:04 +0100)]
hw/arm/aspeed_soc: don't use vmstate_register_ram_global for SRAM
Currently we use vmstate_register_ram_global() for the SRAM;
this is not a good idea for devices, because it means that
you can only ever create one instance of the device, as
the second instance would get a RAM block name clash.
Instead, use memory_region_init_ram(), which automatically
registers the RAM block with a local-to-the-device name.
Note that this would be a cross-version migration compatibility break
for the "palmetto-bmc", "ast2500-evb" and "romulus-bmc" machines,
but migration is currently broken for them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id:
20180420124835.7268-4-peter.maydell@linaro.org