OSDN Git Service
Ben Dooks [Tue, 1 Nov 2005 19:44:28 +0000 (19:44 +0000)]
[ARM] 3071/1: RX3715 - add lcd/fb platform setup
Patch from Ben Dooks
Platform data for the LCD/framebuffer driver for
the RX3715 LCD panel.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Lennert Buytenhek [Tue, 1 Nov 2005 19:44:27 +0000 (19:44 +0000)]
[ARM] 3065/1: ixp2000 typo and whitespace fixes
Patch from Lennert Buytenhek
Misc ixp2000 typo and whitespace fixes.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Lennert Buytenhek [Tue, 1 Nov 2005 19:44:26 +0000 (19:44 +0000)]
[ARM] 3064/1: start using ixp2000_reg_wrb
Patch from Lennert Buytenhek
Switch the users of ixp2000_reg_write that depend on writes being
flushed out of the write buffer by the time that function returns
over to ixp2000_reg_wrb.
When using XCB=101, writes to the same functional unit are still
guaranteed to complete in order, so we only need to protect against:
- reordering of writes to different functional units
- masking an interrupt and then reenabling the IRQ bit in CPSR
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Lennert Buytenhek [Tue, 1 Nov 2005 19:44:25 +0000 (19:44 +0000)]
[ARM] 3063/1: allow slave ixp2000 cpu reset
Patch from Lennert Buytenhek
On the ixdp2x00, the slave CPU is currently not allowed to reset itself
for fear that it will do something 'funky' on the PCI bus. This fear is
ungrounded -- the slave CPU is wired up such that a CPU reset will not
cause a PCI bus reset to be done. This patch changes arch_reset() so
that the slave CPU also executes the reset sequence, allowing it to
reboot itself using /sbin/reboot.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Lennert Buytenhek [Tue, 1 Nov 2005 19:44:24 +0000 (19:44 +0000)]
[ARM] 3062/1: map in various enp2611 peripherals for the ixp2000 netdev driver
Patch from Lennert Buytenhek
The enp2611 version of the ixp2000 netdev driver needs to be able to
access a number of on-board peripherals. ioremap() is not suitable
for this, as that will cause XCB=000 mappings to be done, which will
make the cpu susceptible to crashing on ixp2400 erratum #66. Properly
aligned iotable mappings with MT_IXP2000_DEVICE will cause section
mappings with XCB=101 to be done, which is safe.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Mon, 31 Oct 2005 17:14:57 +0000 (17:14 +0000)]
[ARM] Convert EBSA110 network driver to a platform driver
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Mon, 31 Oct 2005 16:57:06 +0000 (16:57 +0000)]
[ARM] Fixup platform device.h includes for realview board
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Mon, 31 Oct 2005 14:25:02 +0000 (14:25 +0000)]
[ARM] Add support for ARM RealView board
Support for RealView EB.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Paul Mackerras [Mon, 31 Oct 2005 03:40:03 +0000 (14:40 +1100)]
powerpc: import a fix from arch/ppc/mm/pgtable.c
... namely, the change to the 2-argument pte_alloc_kernel.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Mon, 31 Oct 2005 02:57:01 +0000 (13:57 +1100)]
powerpc: apply recent changes to merged code
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Mon, 31 Oct 2005 02:37:12 +0000 (13:37 +1100)]
Merge ../linux-2.6 by hand
Paul Mackerras [Mon, 31 Oct 2005 02:08:54 +0000 (13:08 +1100)]
ppc: remove duplicate export of cur_cpu_spec
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Mon, 31 Oct 2005 02:07:02 +0000 (13:07 +1100)]
powerpc: Fix bug arising from having multiple memory_limit variables
We had a static memory_limit in prom.c, and then another one defined
in setup_64.c and used in numa.c, which resulted in the kernel crashing
when mem=xxx was given on the command line. This puts the declaration
in system.h and the definition in mem.c. This also moves the
definition of tce_alloc_start/end out of setup_64.c.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Linus Torvalds [Mon, 31 Oct 2005 01:48:37 +0000 (17:48 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-serial
Linus Torvalds [Mon, 31 Oct 2005 01:48:00 +0000 (17:48 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Mon, 31 Oct 2005 01:47:00 +0000 (17:47 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-mmc
Pekka Enberg [Sun, 30 Oct 2005 23:03:50 +0000 (15:03 -0800)]
[PATCH] fat: Remove duplicate directory scanning code
This patch removes duplicate directory scanning code from fs/fat/dir.c. The
two functions that share identical code are fat_readdirx() and
fat_search_long(). This patch also renames fat_readdirx to __fat_readdir().
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OGAWA Hirofumi [Sun, 30 Oct 2005 23:03:50 +0000 (15:03 -0800)]
[PATCH] fat: remove the unneeded vfat_find() in vfat_rename()
Now, vfat_rename() is using vfat_find() for sanity check. This removes that
sanity check, the cost of sanity check is too high.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OGAWA Hirofumi [Sun, 30 Oct 2005 23:03:49 +0000 (15:03 -0800)]
[PATCH] fat: cleanup and optimization of checksum
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Tim Schmielau [Sun, 30 Oct 2005 23:03:48 +0000 (15:03 -0800)]
[PATCH] fix missing includes
I recently picked up my older work to remove unnecessary #includes of
sched.h, starting from a patch by Dave Jones to not include sched.h
from module.h. This reduces the number of indirect includes of sched.h
by ~300. Another ~400 pointless direct includes can be removed after
this disentangling (patch to follow later).
However, quite a few indirect includes need to be fixed up for this.
In order to feed the patches through -mm with as little disturbance as
possible, I've split out the fixes I accumulated up to now (complete for
i386 and x86_64, more archs to follow later) and post them before the real
patch. This way this large part of the patch is kept simple with only
adding #includes, and all hunks are independent of each other. So if any
hunk rejects or gets in the way of other patches, just drop it. My scripts
will pick it up again in the next round.
Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul E. McKenney [Sun, 30 Oct 2005 23:03:46 +0000 (15:03 -0800)]
[PATCH] Remove duplicate code in signal.c
Combine a bit of redundant code between force_sig_info() and
force_sig_specific().
Signed-off-by: paulmck@us.ibm.com
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Oleg Nesterov [Sun, 30 Oct 2005 23:03:46 +0000 (15:03 -0800)]
[PATCH] remove unneeded SI_TIMER checks
This patch removes checks for ->si_code == SI_TIMER from send_signal,
specific_send_sig_info, __group_send_sig_info.
I think posix-timers.c used these functions some time ago, now it sends
signals via send_{,group_}sigqueue, so these hooks are unneeded.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Oleg Nesterov [Sun, 30 Oct 2005 23:03:45 +0000 (15:03 -0800)]
[PATCH] cleanup the usage of SEND_SIG_xxx constants
This patch simplifies some checks for magic siginfo values. It should not
change the behaviour in any way.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Oleg Nesterov [Sun, 30 Oct 2005 23:03:44 +0000 (15:03 -0800)]
[PATCH] remove hardcoded SEND_SIG_xxx constants
This patch replaces hardcoded SEND_SIG_xxx constants with
their symbolic names.
No changes in affected .o files.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Randy Dunlap [Sun, 30 Oct 2005 23:03:44 +0000 (15:03 -0800)]
[PATCH] hpet: hpet driver cleanups
- Use kzalloc() instead of kmalloc + memset.
- Clean/fix some printk's.
- Use NULL for pointers instead of 0.
- Combine hpet busy searching locations into a function call.
Signed-off-by: Randy Dunlap <randy_d_dunlap@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Randy Dunlap [Sun, 30 Oct 2005 23:03:43 +0000 (15:03 -0800)]
[PATCH] hpet: use HPET physical addresses for dup. detection
- Use HPET physical address to detect duplicates, not logical addresses.
Using logical (mapped) addresses fails to detect duplicates
because ioremap() returns a new mapped address each time.
- iounmap() regions when duplicate/busy areas are found.
Signed-off-by: Randy Dunlap <randy_d_dunlap@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Randy Dunlap [Sun, 30 Oct 2005 23:03:42 +0000 (15:03 -0800)]
[PATCH] hpet: allow HPET FIXED_MEM32 resource type
Allow the ACPI HPET description table to use a resource type of FIXED_MEM32
for the HPET reource. Use the fixed resoure size of 1 KB for the HPET
resource as per the HPET spec.
Signed-off-by: Randy Dunlap <randy_d_dunlap@linux.intel.com>
Acked-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Clemens Ladisch [Sun, 30 Oct 2005 23:03:41 +0000 (15:03 -0800)]
[PATCH] hpet: simplify initialization message
When booting, display the timer frequency in Hertz instead of as tick length
in nanoseconds. Apart from saving a local variable, this makes the message
more easily comprehensible.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Clemens Ladisch [Sun, 30 Oct 2005 23:03:40 +0000 (15:03 -0800)]
[PATCH] hpet: remove superfluous indirections
In the hpet_ioctl_common() function, devp->hd_hpets is already cached in the
hpetp variable, so we can use just that.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Clemens Ladisch [Sun, 30 Oct 2005 23:03:39 +0000 (15:03 -0800)]
[PATCH] hpet: fix access to multiple HPET devices
Fix two instances where a function would access the first HPET device instead
of the current one.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Clemens Ladisch [Sun, 30 Oct 2005 23:03:39 +0000 (15:03 -0800)]
[PATCH] hpet: fix uninitialized variable in hpet_register()
Clear the ht_opaque field in the hpet_register() function before searching for
a free timer to prevent the function from incorrectly assuming that the search
succeeded afterwards.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Clemens Ladisch [Sun, 30 Oct 2005 23:03:38 +0000 (15:03 -0800)]
[PATCH] hpet: fix division by zero in HPET_INFO
Fix a division by zero that happened when the HPET_INFO ioctl was called
before a timer frequency had been set.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Clemens Ladisch [Sun, 30 Oct 2005 23:03:37 +0000 (15:03 -0800)]
[PATCH] hpet: fix HPET_INFO calls from kernel space
Fix a wrong memory access in hpet_ioctl_common(). It was not possible to use
the HPET_INFO ioctl from kernel space because it always called copy_to_user().
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Clemens Ladisch [Sun, 30 Oct 2005 23:03:36 +0000 (15:03 -0800)]
[PATCH] hpet-RTC: cache the comparator register
Reads from an HPET register require a round trip to the south bridge and are
almost as slow as PCI reads. By caching the last value we've written to the
comparator register, we can eliminate all HPET reads from the fast path in the
emulated RTC interrupt handler.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Clemens Ladisch [Sun, 30 Oct 2005 23:03:36 +0000 (15:03 -0800)]
[PATCH] hpet-RTC: fix timer config register accesses
Make sure that the RTC timer is in non-periodic mode; some stupid BIOS might
have initialized it to periodic mode.
Furthermore, don't set the SETVAL bit in the config register. This wouldn't
have any effect unless the timer was in period mode (which it isn't), and then
the actual timer frequency would be half that of the desired one because
incrementing the comparator in the interrupt handler would be done after the
hardware has already incremented it itself.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Clemens Ladisch [Sun, 30 Oct 2005 23:03:35 +0000 (15:03 -0800)]
[PATCH] hpet-RTC: disable interrupt when no longer needed
When the emulated RTC interrupt is no longer needed, we better disable it;
otherwise, we get a spurious interrupt whenever the timer has rolled over and
reaches the same comparator value.
Having a superfluous interrupt every five minutes doesn't hurt much, but it's
bad style anyway. ;-)
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Acked-by: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Clemens Ladisch [Sun, 30 Oct 2005 23:03:34 +0000 (15:03 -0800)]
[PATCH] hpet: allow shared interrupts
This patch adds support for shared HPET interrupts.
The driver previously acknowledged interrupts for both edge and level
interrupts, but didn't actually allow a shared interrupt in the latter case.
We use a new per-timer flag to save whether the timer's interrupt might be
shared, and use it to do the processing required for level interrupts only if
necessary.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Acked-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Clemens Ladisch [Sun, 30 Oct 2005 23:03:33 +0000 (15:03 -0800)]
[PATCH] hpet: allow non-power-of-two frequencies
It was only the RTC hardware that restricted interrupt frequencies to a power
of two. There is no reason to take over this restriction into the HPET
driver, so remove the offending check.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Acked-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Clemens Ladisch [Sun, 30 Oct 2005 23:03:32 +0000 (15:03 -0800)]
[PATCH] hpet: remove superfluous register reads
This patch removes several reads of a timer's config register that serve no
purpose whatsoever.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Acked-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Clemens Ladisch [Sun, 30 Oct 2005 23:03:31 +0000 (15:03 -0800)]
[PATCH] hpet: remove unused variable
The variable hpet_ntimer is never read, so remove it.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Acked-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Clemens Ladisch [Sun, 30 Oct 2005 23:03:31 +0000 (15:03 -0800)]
[PATCH] HPET: make frequency calculations 32 bit safe
On 32-bit architectures, the multiplication in the argument for
hpet_time_div() often overflows. In the typical case of a 14.32 MHz timer,
this happens when the desired frequency exceeds 61 Hz.
To avoid this multiplication, we can precompute and store the hardware
timer frequency, instead of the period, in the device structure, which
leaves us with a simple division when computing the number of timer ticks.
As a side effect, this also removes a theoretical bug where the timer
interpolator's frequency would be computed as a 32-bit value even if the
HPET frequency is greater than 2^32 Hz (the HPET spec allows up to 10 GHz).
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Clemens Ladisch [Sun, 30 Oct 2005 23:03:29 +0000 (15:03 -0800)]
[PATCH] hpet: disallow zero interrupt frequency
Disallow setting an interrupt frequency of zero (which would result in a
division by zero), and disallow enabling the interrupt when the frequency
hasn't yet been set (which would use an interrupt period of zero).
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Randy Dunlap [Sun, 30 Oct 2005 23:03:29 +0000 (15:03 -0800)]
[PATCH] sparse cleanups: NULL pointers, C99 struct init.
Convert most of the remaining "Using plain integer as NULL pointer" sparse
warnings to use NULL. (Not duplicating patches that are already in -mm,
-bird, or -kj.)
Convert isdn driver struct initializer to use C99 syntax.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Sun, 30 Oct 2005 23:03:28 +0000 (15:03 -0800)]
[PATCH] tpm-tidies
- Various whitespace fixes
- Use kzalloc()
Acked-by: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Marcel Selhorst [Sun, 30 Oct 2005 23:03:27 +0000 (15:03 -0800)]
[PATCH] Infineon TPM: move infineon driver off pci_dev
Move the Infineon TPM driver off pci device and makes it a pure pnp-driver.
It includes pnp-port validation and region requesting.
Signed-off-by: Marcel Selhorst <selhorst@crypto.rub.de>
Signed-off-by: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Kylene Jo Hall [Sun, 30 Oct 2005 23:03:26 +0000 (15:03 -0800)]
[PATCH] tpm: move nsc driver off pci_dev
This patch changes the nsc driver from a pci driver to a platform driver.
Signed-off-by: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Kylene Jo Hall [Sun, 30 Oct 2005 23:03:25 +0000 (15:03 -0800)]
[PATCH] tpm: move atmel driver off pci_dev
This patch changes the atmel driver from a pci driver to a platform driver.
Signed-off-by: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Kylene Jo Hall [Sun, 30 Oct 2005 23:03:25 +0000 (15:03 -0800)]
[PATCH] tpm: change from pci_dev to dev power management functions
This patch is in support of moving away from the lpc bus pci_dev. The power
management prototypes used by platform drivers is different but the
functionality remains the same.
Signed-off-by: Kylene Hall <kjhall@us.ibm.com
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Kylene Jo Hall [Sun, 30 Oct 2005 23:03:24 +0000 (15:03 -0800)]
[PATCH] tpm: remove pci dependency
Since the tpm does not have it's own pci id we have been consuming the lpc
bus. This is not correct and causes problems to support non lpc bus chips.
This patch removes the dependency on pci_dev from tpm.c The subsequent patches
will stop the supported chips from registering as pci drivers.
Signed-off-by: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Kylene Jo Hall [Sun, 30 Oct 2005 23:03:23 +0000 (15:03 -0800)]
[PATCH] tpm: add status function to allow non-lpc bus chips
This patch is in preparation of supporting chips that are not necessarily on
the lpc bus and thus are not accessed with inb's and outb's. The patch
replaces the call to get the chip's status in the tpm.c file with a vendor
specific status function. The patch also defines the function for each of the
current supported devices.
Signed-off-by: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Sun, 30 Oct 2005 23:03:22 +0000 (15:03 -0800)]
[PATCH] Don't set dcdbas driver to default m
It's nasty to set random drivers to default m because people who just press
enter on make oldconfig get these. Remove the default m
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul Jackson [Sun, 30 Oct 2005 23:03:21 +0000 (15:03 -0800)]
[PATCH] sched: hardcode non-smp set_cpus_allowed
Simplify the UP (1 CPU) implementatin of set_cpus_allowed.
The one CPU is hardcoded to be cpu 0 - so just test for that bit, and avoid
having to pick up the cpu_online_map.
Also, unexport cpu_online_map: it was only needed for set_cpus_allowed().
Signed-off-by: Paul Jackson <pj@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Yuri Vasilevski [Sun, 30 Oct 2005 23:03:20 +0000 (15:03 -0800)]
[PATCH] fix build on nls free systems
I made a patch that detects if libintl.h (needed for nls) is present on the
host system and if it's not, it nls support is disabled by providing
dummies for the used nls functions.
This way if there is nls support on the host system the *config targets
will build according to Arnaldo Carvalho de Melo's i18n modifications, else
it just uses the original English messages.
I have also made a bug report at kernel's bugzilla:
http://bugzilla.kernel.org/show_bug.cgi?id=5501
And there is a discussion about this problem in Gentoo's bugzilla:
http://bugs.gentoo.org/show_bug.cgi?id=99810
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Horms [Sun, 30 Oct 2005 23:03:19 +0000 (15:03 -0800)]
[PATCH] README doesn't mention bzip2 source tarball
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul Jackson [Sun, 30 Oct 2005 23:03:19 +0000 (15:03 -0800)]
[PATCH] lib/string.c cleanup: restore useful memmove const
A couple of (char *) casts removed in a previous cleanup patch in
lib/string.c:memmove() were actually useful, as they suppressed a couple of
warnings:
assignment discards qualifiers from pointer target type
Fix by declaring the local variable const in the first place, so casts
aren't needed to strip the const qualifier.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Matt Mackall [Sun, 30 Oct 2005 23:03:18 +0000 (15:03 -0800)]
[PATCH] Error checks omitted in init_tmpfs() in mm/tiny-shmem.c
From: Hareesh Nagarajan <hnagar2@gmail.com>
Signed-off-by: Hareesh Nagarajan <hnagar2@gmail.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Sun, 30 Oct 2005 23:03:15 +0000 (15:03 -0800)]
[PATCH] __bread oops fix
If a filesystem passes an idiotic blocksize into bread(), __getblk_slow() will
warn and will return NULL. We have a report (from Hubert Tonneau
<hubert.tonneau@fullpliant.org>) of isofs_fill_super() doing this (passing in
a silly block size) against an unplugged CDROM drive.
But a couple of __getblk_slow() callers forgot to check for the NULL bh, hence
oops.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Arthur Othieno [Sun, 30 Oct 2005 23:03:14 +0000 (15:03 -0800)]
[PATCH] semaphore: Remove __MUTEX_INITIALIZER()
__MUTEX_INITIALIZER() has no users, and equates to the more commonly used
DECLARE_MUTEX(), thus making it pretty much redundant. Remove it for good.
Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Bjorn Helgaas [Sun, 30 Oct 2005 23:03:14 +0000 (15:03 -0800)]
[PATCH] rocketport: make it work when statically linked into kernel
The driver had incorrectly wrapped module_init(rp_init) in #ifdef MODULE,
so it worked only when compiled as a module.
Tested by Wolfgang Denk with this device:
00:0e.0 Communication controller: Comtrol Corporation RocketPort 8 port w/RJ11 connectors (rev 04)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 7000 [size=64]
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Roland McGrath [Sun, 30 Oct 2005 23:03:13 +0000 (15:03 -0800)]
[PATCH] posix-cpu-timers: fix overrun reporting
This change corrects an omission in posix_cpu_timer_schedule, so that it
correctly propagates the overrun calculation to where it will get reported
to the user.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul E. McKenney [Sun, 30 Oct 2005 23:03:12 +0000 (15:03 -0800)]
[PATCH] RCU torture-testing kernel module
This patch is a rewrite of the one submitted on October 1st, using modules
(http://marc.theaimsgroup.com/?l=linux-kernel&m=
112819093522998&w=2).
This rewrite adds a tristate CONFIG_RCU_TORTURE_TEST, which enables an
intense torture test of the RCU infratructure. This is needed due to the
continued changes to the RCU infrastructure to accommodate dynamic ticks,
CPU hotplug, realtime, and so on. Most of the code is in a separate file
that is compiled only if the CONFIG variable is set. Documentation on how
to run the test and interpret the output is also included.
This code has been tested on i386 and ppc64, and an earlier version of the
code has received extensive testing on a number of architectures as part of
the PREEMPT_RT patchset.
Signed-off-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alexey Dobriyan [Sun, 30 Oct 2005 23:03:11 +0000 (15:03 -0800)]
[PATCH] fs/attr.c: remove BUG()
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Nikita Danilov [Sun, 30 Oct 2005 23:03:10 +0000 (15:03 -0800)]
[PATCH] include/linux/kernel.h:BUILD_BUG_ON(): fix a comment
Fix comment describing BUILD_BUG_ON: BUG_ON is not an assertion
(unfortunately).
Signed-off-by: Nikita Danilov <nikita@clusterfs.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Laurent Riffard [Sun, 30 Oct 2005 23:03:09 +0000 (15:03 -0800)]
[PATCH] watchdog: update .owner field of struct pci_driver
This updates .owner field of struct pci_driver.
This allows SYSFS to create the symlink from the driver to the module which
provides it.
Signed-off-by: Laurent Riffard <laurent.riffard@free.fr>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Laurent Riffard [Sun, 30 Oct 2005 23:03:08 +0000 (15:03 -0800)]
[PATCH] SyncLink adapters: updates .owner field of struct pci_driver
This updates .owner field of struct pci_driver.
This allows SYSFS to create the symlink from the driver to the module which
provides it.
Signed-off-by: Laurent Riffard <laurent.riffard@free.fr>
Cc: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Laurent Riffard [Sun, 30 Oct 2005 23:03:08 +0000 (15:03 -0800)]
[PATCH] epca: update .owner field of struct pci_driver
This updates .owner field of struct pci_driver.
This allows SYSFS to create the symlink from the driver to the module which
provides it.
Signed-off-by: Laurent Riffard <laurent.riffard@free.fr>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Pozsar Balazs [Sun, 30 Oct 2005 23:03:06 +0000 (15:03 -0800)]
[PATCH] fix vgacon blanking
This patch fixes a long-standing vgacon bug: characters with the bright bit
set were left on the screen and not blacked out. All I did was that I
lookuped up some examples on the net about setting the vga palette, and
added the call missing from the linux kernel, but included in all other
ones. It works for me.
You can test this by writing something with the bright set to the
console, for example:
echo -e "\e[1;31mhello there\e[0m"
and then wait for the console to blank itself (by default, after 10 mins
of inactivity), maybe making it faster using
setterm -blank 1
so you only have to wait 1 minute.
Signed-off-by: Pozsar Balazs <pozsy@uhulinux.hu>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Glauber de Oliveira Costa [Sun, 30 Oct 2005 23:03:05 +0000 (15:03 -0800)]
[PATCH] Test for sb_getblk return value
This patch adds tests for the return value of sb_getblk() in the ext2/3
filesystems. In fs/buffer.c it is stated that the getblk() function never
fails. However, it does can return NULL in some situations due to I/O
errors, which may lead us to NULL pointer dereferences
Signed-off-by: Glauber de Oliveira Costa <glommer@br.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrea Arcangeli [Sun, 30 Oct 2005 23:03:05 +0000 (15:03 -0800)]
[PATCH] fix nr_unused accounting, and avoid recursing in iput with I_WILL_FREE set
list_move(&inode->i_list, &inode_in_use);
} else {
list_move(&inode->i_list, &inode_unused);
+ inodes_stat.nr_unused++;
}
}
wake_up_inode(inode);
Are you sure the above diff is correct? It was added somewhere between
2.6.5 and 2.6.8. I think it's wrong.
The only way I can imagine the i_count to be zero in the above path, is
that I_WILL_FREE is set. And if I_WILL_FREE is set, then we must not
increase nr_unused. So I believe the above change is buggy and it will
definitely overstate the number of unused inodes and it should be backed
out.
Note that __writeback_single_inode before calling __sync_single_inode, can
drop the spinlock and we can have both the dirty and locked bitflags clear
here:
spin_unlock(&inode_lock);
__wait_on_inode(inode);
iput(inode);
XXXXXXX
spin_lock(&inode_lock);
}
use inode again here
a construct like the above makes zero sense from a reference counting
standpoint.
Either we don't ever use the inode again after the iput, or the
inode_lock should be taken _before_ executing the iput (i.e. a __iput
would be required). Taking the inode_lock after iput means the iget was
useless if we keep using the inode after the iput.
So the only chance the 2.6 was safe to call __writeback_single_inode
with the i_count == 0, is that I_WILL_FREE is set (I_WILL_FREE will
prevent the VM to free the inode in XXXXX).
Potentially calling the above iput with I_WILL_FREE was also wrong
because it would recurse in iput_final (the second mainline bug).
The below (untested) patch fixes the nr_unused accounting, avoids recursing
in iput when I_WILL_FREE is set and makes sure (with the BUG_ON) that we
don't corrupt memory and that all holders that don't set I_WILL_FREE, keeps
a reference on the inode!
Signed-off-by: Andrea Arcangeli <andrea@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Pavel Roskin [Sun, 30 Oct 2005 23:03:03 +0000 (15:03 -0800)]
[PATCH] modules: fix sparse warning for every MODULE_PARM
sparse complains about every MODULE_PARM used in a module: warning: symbol
'__parm_foo' was not declared. Should it be static?
The fix is to split declaration and initialization. While MODULE_PARM is
obsolete, it's not something sparse should report.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Nicolas Pitre [Sun, 30 Oct 2005 23:03:02 +0000 (15:03 -0800)]
[PATCH] extable: remove needless declaration
They aren't used anywhere in that file.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Sun, 30 Oct 2005 23:03:02 +0000 (15:03 -0800)]
[PATCH] setkeys needs root
Because people can play games reprogramming keys and leaving traps for the
next user of the console.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Randy Dunlap [Sun, 30 Oct 2005 23:03:01 +0000 (15:03 -0800)]
[PATCH] firmware: fix all kernel-doc warnings
Convert existing function docs to kernel-doc format. Eliminate all
kernel-doc warnings. Fix some doc typos and a little whitespace cleanup.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Thomas Gleixner [Sun, 30 Oct 2005 23:03:00 +0000 (15:03 -0800)]
[PATCH] jiffies_64 cleanup
Define jiffies_64 in kernel/timer.c rather than having 24 duplicated
defines in each architecture.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Brian Gerst [Sun, 30 Oct 2005 23:03:00 +0000 (15:03 -0800)]
[PATCH] Remove orphaned TIOCGDEV compat ioctl
This ioctl doesn't exist for native i386.
Signed-off-by: Brian Gerst <bgerst@didntduck.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ben Dooks [Sun, 30 Oct 2005 23:02:56 +0000 (15:02 -0800)]
[PATCH] ext3: sparse fixes
Fix warnings from sparse due to un-declared functions that should either
have a header file or have been declared static
fs/ext2/bitmap.c:14:15: warning: symbol 'ext2_count_free' was not declared. Should it be static?
fs/ext2/namei.c:92:15: warning: symbol 'ext2_get_parent' was not declared. Should it be static?
fs/ext3/bitmap.c:15:15: warning: symbol 'ext3_count_free' was not declared. Should it be static?
fs/ext3/namei.c:1013:15: warning: symbol 'ext3_get_parent' was not declared. Should it be static?
fs/ext3/xattr.c:214:1: warning: symbol 'ext3_xattr_block_get' was not declared. Should it be static?
fs/ext3/xattr.c:358:1: warning: symbol 'ext3_xattr_block_list' was not declared. Should it be static?
fs/ext3/xattr.c:630:1: warning: symbol 'ext3_xattr_block_find' was not declared. Should it be static?
fs/ext3/xattr.c:863:1: warning: symbol 'ext3_xattr_ibody_find' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mark Gross [Sun, 30 Oct 2005 23:02:55 +0000 (15:02 -0800)]
[PATCH] Telecom Clock Driver for MPCBL0010 ATCA computer blade
Signed-off-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Oleg Nesterov [Sun, 30 Oct 2005 23:02:54 +0000 (15:02 -0800)]
[PATCH] fix de_thread() vs do_coredump() deadlock
de_thread() sends SIGKILL to all sub-threads and waits them to die in 'D'
state. It is possible that one of the threads already dequeued coredump
signal. When de_thread() unlocks ->sighand->lock that thread can enter
do_coredump()->coredump_wait() and cause a deadlock.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Carlos Sanchez [Sun, 30 Oct 2005 23:02:53 +0000 (15:02 -0800)]
[PATCH] Added a Receive_Abort to the Marvell serial driver
Added a Receive_Abort to the Marvell serial driver
Fix occasional input overrun errors on Marvell serial driver
- If the Marvell serial driver is repeatedly started and then stopped it
will occasionally report an input overrun error when started.
- Added a Receive_Abort to the Marvell serial driver to abort previously
received receive errors when re-starting the receive
Acked-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Carlos Sanchez <csanchez@mvista.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Miklos Szeredi [Sun, 30 Oct 2005 23:02:52 +0000 (15:02 -0800)]
[PATCH] fuse: remove unused define
Setting ctime is implicit in all setattr cases, so the FATTR_CTIME
definition is unnecessary.
It is used by neither the kernel nor by userspace.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Miklos Szeredi [Sun, 30 Oct 2005 23:02:51 +0000 (15:02 -0800)]
[PATCH] fuse: spelling fixes
Correct some typos and inconsistent use of "initialise" vs "initialize" in
comments. Reported by Ioannis Barkas.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jesper Juhl [Sun, 30 Oct 2005 23:02:51 +0000 (15:02 -0800)]
[PATCH] Kconfig help text correction for CONFIG_FRAME_POINTER
Fix-up the CONFIG_FRAME_POINTER help text language a bit.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Roland McGrath [Sun, 30 Oct 2005 23:02:50 +0000 (15:02 -0800)]
[PATCH] wait4 PTRACE_ATTACH race fix
Back about a year ago when I last fiddled heavily with the do_wait code, I
was thinking too hard about the wrong thing and I now think I introduced a
bug whose inverse thought I was fixing.
Apparently noone was looking too hard over much shoulder, so as to cite my
bogus reasoning at the time. In the race condition when PTRACE_ATTACH is
about to steal a child and then the child hits a tracing event (what
my_ptrace_child checks for), the real parent does need to set its flag
noting it has some eligible live children. Otherwise a spurious ECHILD
error is possible, since the child in question is not yet on the
ptrace_children list.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Pat Gefre [Sun, 30 Oct 2005 23:02:49 +0000 (15:02 -0800)]
[PATCH] ioc4 serial support - mostly cleanup
Various small mods for the Altix ioc4 serial driver - mostly cleanup:
- remove UIF_INITIALIZED usage
- use the 'lock' from uart_port
- better multiple card support
Signed-off-by: Patrick Gefre <pfg@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Glauber de Oliveira Costa [Sun, 30 Oct 2005 23:02:48 +0000 (15:02 -0800)]
[PATCH] Locking problems while EXT3FS_DEBUG on
I noticed some problems while running ext3 with the debug flag set on.
More precisely, I was unable to umount the filesystem. Some investigation
took me to the patch that follows.
At a first glance , the lock/unlock I've taken out seems really not
necessary, as the main code (outside debug) does not lock the super. The
only additional danger operations that debug code introduces seems to be
related to bitmap, but bitmap operations tends to be all atomic anyway.
I also took the opportunity to fix 2 spelling errors.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Oleg Nesterov [Sun, 30 Oct 2005 23:02:47 +0000 (15:02 -0800)]
[PATCH] coredump_wait() cleanup
This patch deletes pointless code from coredump_wait().
1. It does useless mm->core_waiters inc/dec under mm->mmap_sem,
but any changes to ->core_waiters have no effect until we drop
->mmap_sem.
2. It calls yield() for absolutely unknown reason.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Coywolf Qi Hunt [Sun, 30 Oct 2005 23:02:47 +0000 (15:02 -0800)]
[PATCH] PF_DEAD cleanup
The PF_DEAD setting doesn't belong to exit_notify(), move it to a proper
place.
Signed-off-by: Coywolf Qi Hunt <qiyong@fc-cn.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jesper Juhl [Sun, 30 Oct 2005 23:02:46 +0000 (15:02 -0800)]
[PATCH] cleanup for kernel/printk.c
- Removes some trailing whitespace
- Breaks long lines and make other small changes to conform to CodingStyle
- Add explicit printk loglevels in two places.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jesper Juhl [Sun, 30 Oct 2005 23:02:45 +0000 (15:02 -0800)]
[PATCH] ide-cd mini cleanup of casts
Remove some unneeded casts.
Avoid an assignment in the case of kmalloc failure.
Break a few instances of if (foo) whatever; into two lines.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
David Howells [Sun, 30 Oct 2005 23:02:44 +0000 (15:02 -0800)]
[PATCH] Keys: Get rid of warning in kmod.c if keys disabled
The attached patch gets rid of a "statement without effect" warning when
CONFIG_KEYS is disabled by making use of the return value of key_get().
The compiler will optimise all of this away when keys are disabled.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
David Howells [Sun, 30 Oct 2005 23:02:44 +0000 (15:02 -0800)]
[PATCH] Keys: Add LSM hooks for key management [try #3]
The attached patch adds LSM hooks for key management facilities. The notable
changes are:
(1) The key struct now supports a security pointer for the use of security
modules. This will permit key labelling and restrictions on which
programs may access a key.
(2) Security modules get a chance to note (or abort) the allocation of a key.
(3) The key permission checking can now be enhanced by the security modules;
the permissions check consults LSM if all other checks bear out.
(4) The key permissions checking functions now return an error code rather
than a boolean value.
(5) An extra permission has been added to govern the modification of
attributes (UID, GID, permissions).
Note that there isn't an LSM hook specifically for each keyctl() operation,
but rather the permissions hook allows control of individual operations based
on the permission request bits.
Key management access control through LSM is enabled by automatically if both
CONFIG_KEYS and CONFIG_SECURITY are enabled.
This should be applied on top of the patch ensubjected:
[PATCH] Keys: Possessor permissions should be additive
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
David Howells [Sun, 30 Oct 2005 23:02:42 +0000 (15:02 -0800)]
[PATCH] Keys: Export user-defined keyring operations
Export user-defined key operations so that those who wish to define their
own key type based on the user-defined key operations may do so (as has
been requested).
The header file created has been placed into include/keys/user-type.h, thus
creating a directory where other key types may also be placed. Any
objections to doing this?
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-Off-By: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Tejun Heo [Sun, 30 Oct 2005 23:02:42 +0000 (15:02 -0800)]
[PATCH] vm: remove unused/broken page_pte[_prot] macros
This patch removes page_pte_prot and page_pte macros from all
architectures. Some architectures define both, some only page_pte (broken)
and others none. These macros are not used anywhere.
page_pte_prot(page, prot) is identical to mk_pte(page, prot) and
page_pte(page) is identical to page_pte_prot(page, __pgprot(0)).
* The following architectures define both page_pte_prot and page_pte
arm, arm26, ia64, sh64, sparc, sparc64
* The following architectures define only page_pte (broken)
frv, i386, m32r, mips, sh, x86-64
* All other architectures define neither
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Tejun Heo [Sun, 30 Oct 2005 23:02:40 +0000 (15:02 -0800)]
[PATCH] vm: remove redundant assignment from __pagevec_release_nonlru()
This patch removes redundant assignment from __pagevec_release_nonlru().
pages_to_free.cold is set to pvec->cold by pagevec_init() call right above
the assignment.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Tejun Heo [Sun, 30 Oct 2005 23:02:40 +0000 (15:02 -0800)]
[PATCH] fs: error case fix in __generic_file_aio_read
When __generic_file_aio_read() hits an error during reading, it reports the
error iff nothing has successfully been read yet. This is condition - when
an error occurs, if nothing has been read/written, report the error code;
otherwise, report the amount of bytes successfully transferred upto that
point.
This corner case can be exposed by performing readv(2) with the following
iov.
iov[0] = len0 @ ptr0
iov[1] = len1 @ NULL (or any other invalid pointer)
iov[2] = len2 @ ptr2
When file size is enough, performing above readv(2) results in
len0 bytes from file_pos @ ptr0
len2 bytes from file_pos + len0 @ ptr2
And the return value is len0 + len2. Test program is attached to this
mail.
This patch makes __generic_file_aio_read()'s error handling identical to
other functions.
#include <stdio.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#include <sys/uio.h>
#include <errno.h>
#include <string.h>
int main(int argc, char **argv)
{
const char *path;
struct stat stbuf;
size_t len0, len1;
void *buf0, *buf1;
struct iovec iov[3];
int fd, i;
ssize_t ret;
if (argc < 2) {
fprintf(stderr, "Usage: testreadv path (better be a "
"small text file)\n");
return 1;
}
path = argv[1];
if (stat(path, &stbuf) < 0) {
perror("stat");
return 1;
}
len0 = stbuf.st_size / 2;
len1 = stbuf.st_size - len0;
if (!len0 || !len1) {
fprintf(stderr, "Dude, file is too small\n");
return 1;
}
if ((fd = open(path, O_RDONLY)) < 0) {
perror("open");
return 1;
}
if (!(buf0 = malloc(len0)) || !(buf1 = malloc(len1))) {
perror("malloc");
return 1;
}
memset(buf0, 0, len0);
memset(buf1, 0, len1);
iov[0].iov_base = buf0;
iov[0].iov_len = len0;
iov[1].iov_base = NULL;
iov[1].iov_len = len1;
iov[2].iov_base = buf1;
iov[2].iov_len = len1;
printf("vector ");
for (i = 0; i < 3; i++)
printf("%p:%zu ", iov[i].iov_base, iov[i].iov_len);
printf("\n");
ret = readv(fd, iov, 3);
if (ret < 0)
perror("readv");
printf("readv returned %zd\nbuf0 = [%s]\nbuf1 = [%s]\n",
ret, (char *)buf0, (char *)buf1);
return 0;
}
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrea Arcangeli [Sun, 30 Oct 2005 23:02:38 +0000 (15:02 -0800)]
[PATCH] ptrace/coredump/exit_group deadlock
I could seldom reproduce a deadlock with a task not killable in T state
(TASK_STOPPED, not TASK_TRACED) by attaching a NPTL threaded program to
gdb, by segfaulting the task and triggering a core dump while some other
task is executing exit_group and while one task is in ptrace_attached
TASK_STOPPED state (not TASK_TRACED yet). This originated from a gdb
bugreport (the fact gdb was segfaulting the task wasn't a kernel bug), but
I just incidentally noticed the gdb bug triggered a real kernel bug as
well.
Most threads hangs in exit_mm because the core_dumping is still going, the
core dumping hangs because the stopped task doesn't exit, the stopped task
can't wakeup because it has SIGNAL_GROUP_EXIT set, hence the deadlock.
To me it seems that the problem is that the force_sig_specific(SIGKILL) in
zap_threads is a noop if the task has PF_PTRACED set (like in this case
because gdb is attached). The __ptrace_unlink does nothing because the
signal->flags is set to SIGNAL_GROUP_EXIT|SIGNAL_STOP_DEQUEUED (verified).
The above info also shows that the stopped task hit a race and got the stop
signal (presumably by the ptrace_attach, only the attach, state is still
TASK_STOPPED and gdb hangs waiting the core before it can set it to
TASK_TRACED) after one of the thread invoked the core dump (it's the core
dump that sets signal->flags to SIGNAL_GROUP_EXIT).
So beside the fact nobody would wakeup the task in __ptrace_unlink (the
state is _not_ TASK_TRACED), there's a secondary problem in the signal
handling code, where a task should ignore the ptrace-sigstops as long as
SIGNAL_GROUP_EXIT is set (or the wakeup in __ptrace_unlink path wouldn't be
enough).
So I attempted to make this patch that seems to fix the problem. There
were various ways to fix it, perhaps you prefer a different one, I just
opted to the one that looked safer to me.
I also removed the clearing of the stopped bits from the zap_other_threads
(zap_other_threads was safe unlike zap_threads). I don't like useless
code, this whole NPTL signal/ptrace thing is already unreadable enough and
full of corner cases without confusing useless code into it to make it even
less readable. And if this code is really needed, then you may want to
explain why it's not being done in the other paths that sets
SIGNAL_GROUP_EXIT at least.
Even after this patch I still wonder who serializes the read of
p->ptrace in zap_threads.
Patch is called ptrace-core_dump-exit_group-deadlock-1.
This was the trace I've got:
test T
ffff81003e8118c0 0 14305 1 14311 14309 (NOTLB)
ffff810058ccdde8 0000000000000082 000001f4000037e1 ffff810000000013
00000000000000f8 ffff81003e811b00 ffff81003e8118c0 ffff810011362100
0000000000000012 ffff810017ca4180
Call Trace:<
ffffffff801317ed>{try_to_wake_up+893} <
ffffffff80141677>{finish_stop+87}
<
ffffffff8014367f>{get_signal_to_deliver+1359} <
ffffffff8010d3ad>{do_signal+157}
<
ffffffff8013deee>{ptrace_check_attach+222} <
ffffffff80111575>{sys_ptrace+2293}
<
ffffffff80131810>{default_wake_function+0} <
ffffffff80196399>{sys_ioctl+73}
<
ffffffff8010dd27>{sysret_signal+28} <
ffffffff8010e00f>{ptregscall_common+103}
test D
ffff810011362100 0 14309 1 14305 14312 (NOTLB)
ffff810053c81cf8 0000000000000082 0000000000000286 0000000000000001
0000000000000195 ffff810011362340 ffff810011362100 ffff81002e338040
ffff810001e0ca80 0000000000000001
Call Trace:<
ffffffff801317ed>{try_to_wake_up+893} <
ffffffff8044677d>{wait_for_completion+173}
<
ffffffff80131810>{default_wake_function+0} <
ffffffff80137435>{exit_mm+149}
<
ffffffff801381af>{do_exit+479} <
ffffffff80138d0c>{do_group_exit+252}
<
ffffffff801436db>{get_signal_to_deliver+1451} <
ffffffff8010d3ad>{do_signal+157}
<
ffffffff8013deee>{ptrace_check_attach+222} <
ffffffff80140850>{specific_send_sig_info+2
<
ffffffff8014208a>{force_sig_info+186} <
ffffffff804479a0>{do_int3+112}
<
ffffffff8010e308>{retint_signal+61}
test D
ffff81002e338040 0 14311 1 14716 14305 (NOTLB)
ffff81005ca8dcf8 0000000000000082 0000000000000286 0000000000000001
0000000000000120 ffff81002e338280 ffff81002e338040 ffff8100481cb740
ffff810001e0ca80 0000000000000001
Call Trace:<
ffffffff801317ed>{try_to_wake_up+893} <
ffffffff8044677d>{wait_for_completion+173}
<
ffffffff80131810>{default_wake_function+0} <
ffffffff80137435>{exit_mm+149}
<
ffffffff801381af>{do_exit+479} <
ffffffff80142d0e>{__dequeue_signal+558}
<
ffffffff80138d0c>{do_group_exit+252} <
ffffffff801436db>{get_signal_to_deliver+1451}
<
ffffffff8010d3ad>{do_signal+157} <
ffffffff8013deee>{ptrace_check_attach+222}
<
ffffffff80140850>{specific_send_sig_info+208} <
ffffffff8014208a>{force_sig_info+186}
<
ffffffff804479a0>{do_int3+112} <
ffffffff8010e308>{retint_signal+61}
test D
ffff810017ca4180 0 14312 1 14309 13882 (NOTLB)
ffff81005d15fcb8 0000000000000082 ffff81005d15fc58 ffffffff80130816
0000000000000897 ffff810017ca43c0 ffff810017ca4180 ffff81003e8118c0
0000000000000082 ffffffff801317ed
Call Trace:<
ffffffff80130816>{activate_task+150} <
ffffffff801317ed>{try_to_wake_up+893}
<
ffffffff8044677d>{wait_for_completion+173} <
ffffffff80131810>{default_wake_function+0}
<
ffffffff8018cdc3>{do_coredump+819} <
ffffffff80445f52>{thread_return+82}
<
ffffffff801436d4>{get_signal_to_deliver+1444} <
ffffffff8010d3ad>{do_signal+157}
<
ffffffff8013deee>{ptrace_check_attach+222} <
ffffffff80140850>{specific_send_sig_info+2
<
ffffffff804472e5>{_spin_unlock_irqrestore+5} <
ffffffff8014208a>{force_sig_info+186}
<
ffffffff804476ff>{do_general_protection+159} <
ffffffff8010e308>{retint_signal+61}
Signed-off-by: Andrea Arcangeli <andrea@suse.de>
Cc: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul Jackson [Sun, 30 Oct 2005 23:02:36 +0000 (15:02 -0800)]
[PATCH] cpusets: automatic numa mempolicy rebinding
This patch automatically updates a tasks NUMA mempolicy when its cpuset
memory placement changes. It does so within the context of the task,
without any need to support low level external mempolicy manipulation.
If a system is not using cpusets, or if running on a system with just the
root (all-encompassing) cpuset, then this remap is a no-op. Only when a
task is moved between cpusets, or a cpusets memory placement is changed
does the following apply. Otherwise, the main routine below,
rebind_policy() is not even called.
When mixing cpusets, scheduler affinity, and NUMA mempolicies, the
essential role of cpusets is to place jobs (several related tasks) on a set
of CPUs and Memory Nodes, the essential role of sched_setaffinity is to
manage a jobs processor placement within its allowed cpuset, and the
essential role of NUMA mempolicy (mbind, set_mempolicy) is to manage a jobs
memory placement within its allowed cpuset.
However, CPU affinity and NUMA memory placement are managed within the
kernel using absolute system wide numbering, not cpuset relative numbering.
This is ok until a job is migrated to a different cpuset, or what's the
same, a jobs cpuset is moved to different CPUs and Memory Nodes.
Then the CPU affinity and NUMA memory placement of the tasks in the job
need to be updated, to preserve their cpuset-relative position. This can
be done for CPU affinity using sched_setaffinity() from user code, as one
task can modify anothers CPU affinity. This cannot be done from an
external task for NUMA memory placement, as that can only be modified in
the context of the task using it.
However, it easy enough to remap a tasks NUMA mempolicy automatically when
a task is migrated, using the existing cpuset mechanism to trigger a
refresh of a tasks memory placement after its cpuset has changed. All that
is needed is the old and new nodemask, and notice to the task that it needs
to rebind its mempolicy. The tasks mems_allowed has the old mask, the
tasks cpuset has the new mask, and the existing
cpuset_update_current_mems_allowed() mechanism provides the notice. The
bitmap/cpumask/nodemask remap operators provide the cpuset relative
calculations.
This patch leaves open a couple of issues:
1) Updating vma and shmfs/tmpfs/hugetlbfs memory policies:
These mempolicies may reference nodes outside of those allowed to
the current task by its cpuset. Tasks are migrated as part of jobs,
which reside on what might be several cpusets in a subtree. When such
a job is migrated, all NUMA memory policy references to nodes within
that cpuset subtree should be translated, and references to any nodes
outside that subtree should be left untouched. A future patch will
provide the cpuset mechanism needed to mark such subtrees. With that
patch, we will be able to correctly migrate these other memory policies
across a job migration.
2) Updating cpuset, affinity and memory policies in user space:
This is harder. Any placement state stored in user space using
system-wide numbering will be invalidated across a migration. More
work will be required to provide user code with a migration-safe means
to manage its cpuset relative placement, while preserving the current
API's that pass system wide numbers, not cpuset relative numbers across
the kernel-user boundary.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul Jackson [Sun, 30 Oct 2005 23:02:33 +0000 (15:02 -0800)]
[PATCH] cpusets: bitmap and mask remap operators
In the forthcoming task migration support, a key calculation will be
mapping cpu and node numbers from the old set to the new set while
preserving cpuset-relative offset.
For example, if a task and its pages on nodes 8-11 are being migrated to
nodes 24-27, then pages on node 9 (the 2nd node in the old set) should be
moved to node 25 (the 2nd node in the new set.)
As with other bitmap operations, the proper way to code this is to provide
the underlying calculation in lib/bitmap.c, and then to provide the usual
cpumask and nodemask wrappers.
This patch provides that. These operations are termed 'remap' operations.
Both remapping a single bit and a set of bits is supported.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul Jackson [Sun, 30 Oct 2005 23:02:32 +0000 (15:02 -0800)]
[PATCH] cpusets: confine pdflush to its cpuset
This patch keeps pdflush daemons on the same cpuset as their parent, the
kthread daemon.
Some large NUMA configurations put as much as they can of kernel threads
and other classic Unix load in what's called a bootcpuset, keeping the rest
of the system free for dedicated jobs.
This effort is thwarted by pdflush, which dynamically destroys and
recreates pdflush daemons depending on load.
It's easy enough to force the originally created pdflush deamons into the
bootcpuset, at system boottime. But the pdflush threads created later were
allowed to run freely across the system, due to the necessary line in their
startup kthread():
set_cpus_allowed(current, CPU_MASK_ALL);
By simply coding pdflush to start its threads with the cpus_allowed
restrictions of its cpuset (inherited from kthread, its parent) we can
ensure that dynamically created pdflush threads are also kept in the
bootcpuset.
On systems w/o cpusets, or w/o a bootcpuset implementation, the following
will have no affect, leaving pdflush to run on any CPU, as before.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul Jackson [Sun, 30 Oct 2005 23:02:31 +0000 (15:02 -0800)]
[PATCH] cpusets: simple rename
Add support for renaming cpusets. Only allow simple rename of cpuset
directories in place. Don't allow moving cpusets elsewhere in hierarchy or
renaming the special cpuset files in each cpuset directory.
The usefulness of this simple rename became apparent when developing task
migration facilities. It allows building a second cpuset hierarchy using
new names and containing new CPUs and Memory Nodes, moving tasks from the
old to the new cpusets, removing the old cpusets, and then renaming the new
cpusets to be just like the old names, so that any knowledge that the tasks
had of their cpuset names will still be valid.
Leaf node cpusets can be migrated to other CPUs or Memory Nodes by just
updating their 'cpus' and 'mems' files, but because no cpuset can contain
CPUs or Nodes not in its parent cpuset, one cannot do this in a cpuset
hierarchy without first expanding all the non-leaf cpusets to contain the
union of both the old and new CPUs and Nodes, which would obfuscate the
one-to-one migration of a task from one cpuset to another required to
correctly migrate the physical page frames currently allocated to that
task.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>