iotests.py: filter compression type out

We want iotests pass with both the default zlib compression and with
IMGOPTS='compression_type=zstd'.

Actually the only test that is interested in real compression type in
test output is 287 (test for qcow2 compression type) and it's in bash.
So for now we can safely filter out compression type in all qcow2
tests.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-11-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

iotests.py: filter out successful output of qemu-img create

The only "feature" of this "Formatting ..." line is that we have to
update it every time we add new option. Let's drop it.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-10-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

iotest 065: explicit compression type

The test checks different options. It of course fails if set
IMGOPTS='compression_type=zstd'. So, let's be explicit in what
compression type we want and independent of IMGOPTS. Test both existing
compression types.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-9-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

iotest 303: explicit compression type

The test prints qcow2 header fields which depends on chosen compression
type. So, let's be explicit in what compression type we want and
independent of IMGOPTS. Test both existing compression types.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-8-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

iotests.py: rewrite default luks support in qemu_img

Move the logic to more generic qemu_img_pipe_and_status(). Also behave
better when we have several -o options. And reuse argument parser of
course.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-7-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

iotests: drop qemu_img_verbose() helper

qemu_img_verbose() has a drawback of not going through generic
qemu_img_pipe_and_status(). qemu_img_verbose() is not very popular, so
update the only two users to qemu_img_log() and drop qemu_img_verbose()
at all.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-6-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

iotests.py: qemu_img*("create"): support IMGOPTS='compression_type=zstd'

Adding support of IMGOPTS (like in bash tests) allows user to pass a
lot of different options. Still, some may require additional logic.

Now we want compression_type option, so add some smart logic around it:
ignore compression_type=zstd in IMGOPTS, if test want qcow2 in
compatibility mode. As well, ignore compression_type for non-qcow2
formats.

Note that we may instead add support only to qemu_img_create(), but
that works bad:

1. We'll have to update a lot of tests to use qemu_img_create instead
   of qemu_img('create'). (still, we may want do it anyway, but no
   reason to create a dependancy between task of supporting IMGOPTS and
   updating a lot of tests)

2. Some tests use qemu_img_pipe('create', ..) - even more work on
   updating

3. Even if we update all tests to go through qemu_img_create, we'll
   need a way to avoid creating new tests using qemu_img*('create') -
   add assertions.. That doesn't seem good.

So, let's add support of IMGOPTS to most generic
qemu_img_pipe_and_status().

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-5-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

iotests: specify some unsupported_imgopts for python iotests

We are going to support IMGOPTS for python iotests. Still some iotests
will not work with common IMGOPTS used with bash iotests like
specifying refcount_bits and compat qcow2 options. So we
should define corresponding unsupported_imgopts for now.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211223160144.1097696-4-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

iotests.py: implement unsupported_imgopts

We are going to support some addition IMGOPTS in python iotests like
in bash iotests. Similarly to bash iotests, we want a way to skip some
tests which can't work with specific IMGOPTS.

Globally for python iotests we will not support things like
'data_file=$TEST_IMG.ext_data_file' in IMGOPTS, so, forbid this
globally in iotests.py.

Suggested-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

iotests.py: img_info_log(): rename imgopts argument

We are going to support IMGOPTS environment variable like in bash
tests. Corresponding global variable in iotests.py should be called
imgopts. So to not interfere with function argument, rename it in
advance.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-2-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

iotests/MRCE: Write data to source

This test assumes that mirror flushes the source when entering the READY
state, and that the format level will pass that flush on to the protocol
level (where we intercept it with blkdebug).

However, apparently that does not happen when using a VMDK image with
zeroed_grain=on, which actually is the default set by testenv.py.  Right
now, Python tests ignore IMGOPTS, though, so this has no effect; but
Vladimir has a series that will change this, so we need to fix this test
before that series lands.

We can fix it by writing data to the source before we start the mirror
job; apparently that makes the (VMDK) format layer change its mind and
pass on the pre-READY flush to the protocol level, so the test passes
again.  (I presume, without any data written, mirror just does a 64M
zero write on the target, which VMDK with zeroed_grain=on basically just
ignores.)

Without this, we do not get a flush, and so blkdebug only sees a single
flush at the end of the job instead of two, and therefore does not
inject an error, which makes the block job complete instead of raising
an error.

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223165308.103793-1-hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>

tests/qemu-iotests: Fix 051 for binaries without 'lsi53c895a'

The lsi53c895a SCSI adaptor might not be enabled in each and every
x86 QEMU binary, e.g. it's disabled in the RHEL/CentOS build.
Thus let's add a check to the 051 test so that it does not fail if
this device is not available.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211206143404.247032-1-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

Merge remote-tracking branch 'remotes/legoater/tags/pull-ppc-20220130' into staging

ppc 7.0 queue:

* Exception and TLB fixes for the 405 CPU (Fabiano and Cedric)
* spapr fixes (Alexey and Daniel)
* PowerNV PHB3/4 fixes (Frederic and Daniel)
* PowerNV XIVE improvements (Cedric)
* 603 CPUs fixes (Christophe)
* Book-E exception fixes (Vitaly)
* Misc compile issues  (Philippe and Fabiano)
* Exception model rework for the BookS CPUs (Fabiano)
* Exception model rework for the 74xx CPUs (Fabiano)
* Removal of 602 CPUs

# gpg: Signature made Sun 30 Jan 2022 17:42:23 GMT
# gpg:                using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B  0B60 51A3 43C7 CFFB ECA1

* remotes/legoater/tags/pull-ppc-20220130: (41 commits)
  target/ppc: Remove support for the PowerPC 602 CPU
  target/ppc: 74xx: Set SRRs directly in exception code
  target/ppc: 74xx: System Reset interrupt cleanup
  target/ppc: 74xx: System Call exception cleanup
  target/ppc: 74xx: Program exception cleanup
  target/ppc: 74xx: External interrupt cleanup
  target/ppc: 74xx: Machine Check exception cleanup
  target/ppc: Simplify powerpc_excp_74xx
  target/ppc: Introduce powerpc_excp_74xx
  target/ppc: books: Program exception cleanup
  target/ppc: books: External interrupt cleanup
  target/ppc: books: Machine Check exception cleanup
  target/ppc: Simplify powerpc_excp_books
  target/ppc: Introduce powerpc_excp_books
  target/ppc: 405: Watchdog timer exception cleanup
  target/ppc: 405: Program exception cleanup
  target/ppc: 405: Instruction storage interrupt cleanup
  target/ppc: 405: Data Storage exception cleanup
  target/ppc: 405: Debug exception cleanup
  target/ppc: 405: Alignment exception cleanup
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2022-01-28' into staging

nbd patches for 2022-01-28

- Hanna Reitz: regression fix for block status caching
- Philippe Mathieu-Daude: documentation formatting
- Nir Soffer: dead code removal

# gpg: Signature made Fri 28 Jan 2022 22:58:50 GMT
# gpg:                using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg:                 aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg:                 aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2  F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-nbd-2022-01-28:
  iotests/block-status-cache: New test
  block/io: Update BSC only if want_zero is true
  qapi/block: Cosmetic change in BlockExportType schema
  nbd/server.c: Remove unused field

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/quintela-gitlab/tags/migration-20220128-pull-request' into staging

Migration Pull request (Take 2)

Hi

This time I have disabled vmstate canary patches form Dave Gilbert.

Let's see if it works.

Later, Juan.

# gpg: Signature made Fri 28 Jan 2022 18:30:25 GMT
# gpg:                using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg:                 aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03  4B82 F487 EF18 5872 D723

* remotes/quintela-gitlab/tags/migration-20220128-pull-request: (36 commits)
  migration: Move temp page setup and cleanup into separate functions
  migration: Simplify unqueue_page()
  migration: Add postcopy_has_request()
  migration: Enable UFFD_FEATURE_THREAD_ID even without blocktime feat
  migration: No off-by-one for pss->page update in host page size
  migration: Tally pre-copy, downtime and post-copy bytes independently
  migration: Introduce ram_transferred_add()
  migration: Don't return for postcopy_send_discard_bm_ram()
  migration: Drop return code for disgard ram process
  migration: Do chunk page in postcopy_each_ram_send_discard()
  migration: Drop postcopy_chunk_hostpages()
  migration: Don't return for postcopy_chunk_hostpages()
  migration: Drop dead code of ram_debug_dump_bitmap()
  migration/ram: clean up unused comment.
  migration: Report the error returned when save_live_iterate fails
  migration/migration.c: Remove the MIGRATION_STATUS_ACTIVE when migration finished
  migration/migration.c: Avoid COLO boot in postcopy migration
  migration/migration.c: Add missed default error handler for migration state
  Remove unnecessary minimum_version_id_old fields
  multifd: Rename pages_used to normal_pages
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

iotests/block-status-cache: New test

Add a new test to verify that want_zero=false block-status calls do not
pollute the block-status cache for want_zero=true calls.

We check want_zero=true calls and their results using `qemu-img map`
(over NBD), and want_zero=false calls also using `qemu-img map` over
NBD, but using the qemu:allocation-depth context.

(This test case cannot be integrated into nbd-qemu-allocation, because
that is a qcow2 test, and this is a raw test.)

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220118170000.49423-3-hreitz@redhat.com>
Reviewed-by: Nir Soffer <nsoffer@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

block/io: Update BSC only if want_zero is true

We update the block-status cache whenever we get new information from a
bdrv_co_block_status() call to the block driver.  However, if we have
passed want_zero=false to that call, it may flag areas containing zeroes
as data, and so we would update the block-status cache with wrong
information.

Therefore, we should not update the cache with want_zero=false.

Reported-by: Nir Soffer <nsoffer@redhat.com>
Fixes: 0bc329fbb00 ("block: block-status cache for data regions")
Reviewed-by: Nir Soffer <nsoffer@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220118170000.49423-2-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

qapi/block: Cosmetic change in BlockExportType schema

Fix long line introduced in commit bb01ea73110 ("qapi/block:
Restrict vhost-user-blk to CONFIG_VHOST_USER_BLK_SERVER").

Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220119121439.214821-1-f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

nbd/server.c: Remove unused field

NBDRequestData struct has unused QSIMPLEQ_ENTRY field. It seems that
this field exists since the first git commit and was never used.

Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Message-Id: <20220111194313.581486-1-nsoffer@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fixes: d9a73806 ("qemu-nbd: introduce NBDRequest", v1.1)
Signed-off-by: Eric Blake <eblake@redhat.com>

target/ppc: Remove support for the PowerPC 602 CPU

The 602 was derived from the PowerPC 603, for the gaming market it
seems. It was hardly used and no firmware supporting the CPU could be
found. Drop support.

Signed-off-by: Cédric Le Goater <clg@kaod.org>

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220128' into staging

target-arm queue:
 * Update copyright dates to 2022
 * hw/armv7m: Fix broken VMStateDescription
 * hw/char/exynos4210_uart: Fix crash on trying to load VM state
 * rtc: Move RTC function prototypes to their own header
 * xlnx-versal-virt: Support PMC SLCR
 * xlnx-versal-virt: Support OSPI flash memory controller
 * scripts: Explain the difference between linux-headers and standard-headers
 * target/arm: Log CPU index in 'Taking exception' log
 * arm_gicv3_its: Various bugfixes and cleanups
 * arm_gicv3_its: Implement the missing MOVI and MOVALL commands
 * ast2600: Fix address mapping of second SPI controller
 * target/arm: Use correct entrypoint for SVC taken from Hyp to Hyp

# gpg: Signature made Fri 28 Jan 2022 15:29:36 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20220128: (32 commits)
  target/arm: Use correct entrypoint for SVC taken from Hyp to Hyp
  hw/arm: ast2600: Fix address mapping of second SPI controller
  hw/intc/arm_gicv3_its: Implement MOVI
  hw/intc/arm_gicv3_its: Implement MOVALL
  hw/intc/arm_gicv3_its: Check table bounds against correct limit
  hw/intc/arm_gicv3_its: Make GITS_BASER<n> RAZ/WI for unimplemented registers
  hw/intc/arm_gicv3_its: Provide read accessor for translation_ops
  hw/intc/arm_gicv3: Set GICR_CTLR.CES if LPIs are supported
  hw/intc/arm_gicv3_redist: Remove unnecessary zero checks
  hw/intc/arm_gicv3_its: Sort ITS command list into numeric order
  hw/intc/arm_gicv3: Honour GICD_CTLR.EnableGrp1NS for LPIs
  hw/intc/arm_gicv3_its: Don't clear GITS_CWRITER on writes to GITS_CBASER
  hw/intc/arm_gicv3_its: Don't clear GITS_CREADR when GITS_CTLR.ENABLED is set
  hw/intc/arm_gicv3: Initialise dma_as in GIC, not ITS
  hw/intc/arm_gicv3_its: Add tracepoints
  target/arm: Log CPU index in 'Taking exception' log
  scripts: Explain the difference between linux-headers and standard-headers
  MAINTAINERS: Remove myself (for raspi).
  MAINTAINERS: Add an entry for Xilinx Versal OSPI
  hw/arm/xlnx-versal-virt: Connect mt35xu01g flashes to the OSPI
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

migration: Move temp page setup and cleanup into separate functions

Temp pages will need to grow if we want to have multiple channels for postcopy,
because each channel will need its own temp page to cache huge page data.

Before doing that, cleanup the related code.  No functional change intended.

Since at it, touch up the errno handling a little bit on the setup side.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Simplify unqueue_page()

This patch simplifies unqueue_page() on both sides of it (itself, and caller).

Firstly, due to the fact that right after unqueue_page() returned true, we'll
definitely send a huge page (see ram_save_huge_page() call - it will _never_
exit before finish sending that huge page), so unqueue_page() does not need to
jump in small page size if huge page is enabled on the ramblock.  IOW, it's
destined that only the 1st 4K page will be valid, when unqueue the 2nd+ time
we'll notice the whole huge page has already been sent anyway.  Switching to
operating on huge page reduces a lot of the loops of redundant unqueue_page().

Meanwhile, drop the dirty check.  It's not helpful to call test_bit() every
time to jump over clean pages, as ram_save_host_page() has already done so,
while in a faster way (see commit ba1b7c812c ("migration/ram: Optimize
ram_save_host_page()", 2021-05-13)).  So that's not necessary too.

Drop the two tracepoints along the way - based on above analysis it's very
possible that no one is really using it..

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Add postcopy_has_request()

Add a helper to detect whether postcopy has pending request.

Since at it, cleanup the code a bit, e.g. in unqueue_page() we shouldn't need
to check it again on queue empty because we're the only one (besides cleanup
code, which should never run during this process) that will take a request off
the list, so the request list can only grow but not shrink under the hood.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Enable UFFD_FEATURE_THREAD_ID even without blocktime feat

This patch allows us to read the tid even without blocktime feature enabled.
It's useful when tracing postcopy fault thread on faulted pages to show thread
id too with the address.

Remove the comments - they're merely not helpful at all.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: No off-by-one for pss->page update in host page size

We used to do off-by-one fixup for pss->page when finished one host huge page
transfer.  That seems to be unnecesary at all.  Drop it.

Cc: Keqian Zhu <zhukeqian1@huawei.com>
Cc: Kunkun Jiang <jiangkunkun@huawei.com>
Cc: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Tally pre-copy, downtime and post-copy bytes independently

Provide information on the number of bytes copied in the pre-copy,
downtime and post-copy phases of migration.

Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Introduce ram_transferred_add()

Replace direct manipulation of ram_counters.transferred with a
function.

Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Don't return for postcopy_send_discard_bm_ram()

postcopy_send_discard_bm_ram() always return zero. Since it can't
fail, simplify and do not return anything.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Drop return code for disgard ram process

It will just never fail.  Drop those return values where they're constantly
zeros.

A tiny touch-up on the tracepoint so trace_ram_postcopy_send_discard_bitmap()
is called after the logic itself (which sounds more reasonable).

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Do chunk page in postcopy_each_ram_send_discard()

Right now we loop ramblocks for twice, the 1st time chunk the dirty bits with
huge page information; the 2nd time we send the discard ranges.  That's not
necessary - we can do them in a single loop.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Drop postcopy_chunk_hostpages()

This function calls three functions:

  - postcopy_discard_send_init(ms, block->idstr);
  - postcopy_chunk_hostpages_pass(ms, block);
  - postcopy_discard_send_finish(ms);

However only the 2nd function call is meaningful.  It's major role is to make
sure dirty bits are applied in host-page-size granule, so there will be no
partial dirty bits set for a whole host page if huge pages are used.

The 1st/3rd call are for latter when we want to send the disgard ranges.
They're mostly no-op here besides some tracepoints (which are misleading!).

Drop them, then we can directly drop postcopy_chunk_hostpages() as a whole
because we can call postcopy_chunk_hostpages_pass() directly.

There're still some nice comments above postcopy_chunk_hostpages() that explain
what it does.  Copy it over to the caller's site.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Don't return for postcopy_chunk_hostpages()

It always return zero, because it just can't go wrong so far.  Simplify the
code with no functional change.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Drop dead code of ram_debug_dump_bitmap()

I planned to add "#ifdef DEBUG_POSTCOPY" around the function too because
otherwise it'll be compiled into qemu binary even if it'll never be used.  Then
I found that maybe it's easier to just drop it for good..

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration/ram: clean up unused comment.

Just a removal of an unused comment.
a0a8aa147aa did many fixes and removed the parameter named "ms", but forget to remove the corresponding comment in function named "ram_save_host_page".

Signed-off-by: Xu Zheng <xuzheng@cmss.chinamobile.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>

migration: Report the error returned when save_live_iterate fails

Should qemu_savevm_state_iterate() encounter a failure when calling a
particular save_live_iterate function, report the error code returned
by the function.

Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration/migration.c: Remove the MIGRATION_STATUS_ACTIVE when migration finished

The MIGRATION_STATUS_ACTIVE indicates that migration is running.
Remove it to be handled by the default operation,
It should be part of the unknown ending states.

Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration/migration.c: Avoid COLO boot in postcopy migration

COLO dose not support postcopy migration and remove the Fixme.

Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration/migration.c: Add missed default error handler for migration state

In the migration_completion() no other status is expected, for
example MIGRATION_STATUS_CANCELLING, MIGRATION_STATUS_CANCELLED, etc.

Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Remove unnecessary minimum_version_id_old fields

The migration code will not look at a VMStateDescription's
minimum_version_id_old field unless that VMSD has set the
load_state_old field to something non-NULL.  (The purpose of
minimum_version_id_old is to specify what migration version is needed
for the code in the function pointed to by load_state_old to be able
to handle it on incoming migration.)

We have exactly one VMSD which still has a load_state_old,
in the PPC CPU; every other VMSD which sets minimum_version_id_old
is doing so unnecessarily. Delete all the unnecessary ones.

Commit created with:
  sed -i '/\.minimum_version_id_old/d' $(git grep -l '\.minimum_version_id_old')
with the one legitimate use then hand-edited back in.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---

It missed vmstate_ppc_cpu.

multifd: Rename pages_used to normal_pages

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

multifd: recv side only needs the RAMBlock host address

So we can remove the MultiFDPages.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

multifd: Use normal pages array on the recv side

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---

Rename num_normal_pages to total_normal_pages (peter)

multifd: Use normal pages array on the send side

We are only sending normal pages through multifd channels.
Later on this series, we are going to also send zero pages.
We are going to detect if a page is zero or non zero in the multifd
channel thread, not on the main thread.

So we receive an array of pages page->offset[N]

And we will end with:

p->normal[N - zero_pages]
p->zero[zero_pages].

In this patch, we just copy all the pages in offset to normal.

for (i = 0; i < pages->num; i++) {
    p->narmal[p->normal_num] = pages->offset[i];
    p->normal_num++:
}

Later in the series this becomes:

for (i = 0; i < pages->num; i++) {
    if (buffer_is_zero(page->offset[i])) {
        p->zerol[p->zero_num] = pages->offset[i];
        p->zero_num++:
    } else {
        p->narmal[p->normal_num] = pages->offset[i];
        p->normal_num++:
    }
}

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---

Improving comment (dave)
Renaming num_normal_pages to total_normal_pages (peter)

multifd: Unfold "used" variable by its value

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

multifd: Use a single writev on the send side

Until now, we wrote the packet header with write(), and the rest of the
pages with writev().  Just increase the size of the iovec and do a
single writev().

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

multifd: Remove send_write() method

Everything use now iov's.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

multifd: Make zstd use iov's

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

multifd: Make zlib use iov's

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

multifd: Move iov from pages to params

This will allow us to reduce the number of system calls on the next patch.

Signed-off-by: Juan Quintela <quintela@redhat.com>

multifd: Use proper maximum compression values

It happens that there are functions to calculate the worst possible
compression size for a packet.  Use them.

Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: Move ram_release_pages() call to save_zero_page_to_file()

We always need to call it when we find a zero page, so put it in a
single place.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

migration: simplify do_compress_ram_page

The goto is not needed at all.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: Remove masking for compression

Remove the mask in the call to ram_release_pages().  Nothing else does
it, and if the offset has that bits set, we have a lot of trouble.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: ram_release_pages() always receive 1 page as argument

Remove the pages argument. And s/pages/page/

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
---

- Use 1LL instead of casts (philmd)
- Change the whole 1ULL for TARGET_PAGE_SIZE

migration: We only need last_stage in two places

We only need last_stage in two places and we are passing it all
around.  Just add a field to RAMState that passes it.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
---

Repeat subject (philmd suggestion)

migration: All this fields are unsigned

So printing it as %d is wrong.  Notice that for the channel id, that
is an uint8_t, but I changed it anyways for consistency.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

target/arm: Use correct entrypoint for SVC taken from Hyp to Hyp

The exception caused by an SVC instruction may be taken to AArch32
Hyp mode for two reasons:
 * HCR.TGE indicates that exceptions from EL0 should trap to EL2
 * we were already in Hyp mode

The entrypoint in the vector table to be used differs in these two
cases: for an exception routed to Hyp mode from EL0, we enter at the
common 0x14 "hyp trap" entrypoint.  For SVC from Hyp mode to Hyp
mode, we enter at the 0x08 (svc/hvc trap) entrypoint.
In the v8A Arm ARM pseudocode this is done in AArch32.TakeSVCException.

QEMU incorrectly routed both of these exceptions to the 0x14
entrypoint.  Correct the entrypoint for SVC from Hyp to Hyp by making
use of the existing logic which handles "normal entrypoint for
Hyp-to-Hyp, otherwise 0x14" for traps like UNDEF and data/prefetch
aborts (reproduced here since it's outside the visible context
in the diff for this commit):

    if (arm_current_el(env) != 2 && addr < 0x14) {
        addr = 0x14;
    }

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220117131953.3936137-1-peter.maydell@linaro.org

hw/arm: ast2600: Fix address mapping of second SPI controller

Address should be 0x1E631000 and not 0x1E641000 as initially introduced.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/838
Fixes: f25c0ae1079d ("aspeed/soc: Add AST2600 support")
Suggested-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220126083520.4135713-1-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/intc/arm_gicv3_its: Implement MOVI

Implement the ITS MOVI command. This command specifies a (physical) LPI
by DeviceID and EventID and provides a new ICID for it. The ITS must
find the interrupt translation table entry for the LPI, which will
tell it the old ICID. It then moves the pending state of the LPI from
the old redistributor to the new one and updates the ICID field in
the translation table entry.

This is another GICv3 ITS command that we forgot to implement.  Linux
does use this one, but only if the guest powers off one of its CPUs.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-15-peter.maydell@linaro.org

hw/intc/arm_gicv3_its: Implement MOVALL

Implement the ITS MOVALL command, which takes all the pending
interrupts on a source redistributor and makes the not-pending on
that source redistributor and pending on a destination redistributor.

This is a GICv3 ITS command which we forgot to implement. (It is
not used by Linux guests.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-14-peter.maydell@linaro.org

hw/intc/arm_gicv3_its: Check table bounds against correct limit

Currently when we fill in a TableDesc based on the value the guest
has written to the GITS_BASER<n> register, we calculate both:
 * num_entries : the number of entries in the table, constrained
   by the amount of memory the guest has given it
 * num_ids : the number of IDs we support for this table,
   constrained by the implementation choices and the architecture
   (eg DeviceIDs are 16 bits, so num_ids is 1 << 16)

When validating ITS commands, however, we check only num_ids,
thus allowing a broken guest to specify table entries that
index off the end of it. This will only corrupt guest memory,
but the ITS is supposed to reject such commands as invalid.

Instead of calculating both num_entries and num_ids, set
num_entries to the minimum of the two limits, and check that.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-13-peter.maydell@linaro.org

hw/intc/arm_gicv3_its: Make GITS_BASER<n> RAZ/WI for unimplemented registers

The ITS has a bank of 8 GITS_BASER<n> registers, which allow the
guest to specify the base address of various data tables.  Each
register has a read-only type field indicating which table it is for
and a read-write field where the guest can write in the base address
(among other things).  We currently allow the guest to write the
writeable fields for all eight registers, even if the type field is 0
indicating "Unimplemented".  This means the guest can provoke QEMU
into asserting by writing an address into one of these unimplemented
base registers, which bypasses the "if (!value) continue" check in
extract_table_params() and lets us hit the assertion that the type
field is one of the permitted table types.

Prevent the assertion by not allowing the guest to write to the
unimplemented base registers. This means their value will remain 0
and extract_table_params() will ignore them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-12-peter.maydell@linaro.org

hw/intc/arm_gicv3_its: Provide read accessor for translation_ops

The MemoryRegionOps gicv3_its_translation_ops currently provides only
a .write_with_attrs function, because the only register in this
region is the write-only GITS_TRANSLATER.  However, if you don't
provide a read function and the guest tries reading from this memory
region, QEMU will crash because
memory_region_read_with_attrs_accessor() calls a NULL pointer.

Add a read function which always returns 0, to cover both bogus
attempts to read GITS_TRANSLATER and also reads from the rest of the
region, which is documented to be reserved, RES0.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-11-peter.maydell@linaro.org

hw/intc/arm_gicv3: Set GICR_CTLR.CES if LPIs are supported

The GICR_CTLR.CES bit is a read-only bit which is set to 1 to indicate
that the GICR_CTLR.EnableLPIs bit can be written to 0 to disable
LPIs (as opposed to allowing LPIs to be enabled but not subsequently
disabled). Our implementation permits this, so advertise it
by setting CES to 1.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-10-peter.maydell@linaro.org

hw/intc/arm_gicv3_redist: Remove unnecessary zero checks

The ITS-related parts of the redistributor code make some checks for
whether registers like GICR_PROPBASER and GICR_PENDBASER are zero.
There is no requirement in the specification for treating zeroes in
these address registers specially -- they contain guest physical
addresses and it is entirely valid (if unusual) for the guest to
choose to put the tables they address at guest physical address zero.
We use these values only to calculate guest addresses, and attempts
by the guest to use a bad address will be handled by the
address_space_* functions which we use to do the loads and stores.

Remove the unnecessary checks.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-9-peter.maydell@linaro.org

hw/intc/arm_gicv3_its: Sort ITS command list into numeric order

The list of #defines for the ITS command packet numbers is neither
in alphabetical nor numeric order. Sort it into numeric order.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-8-peter.maydell@linaro.org

hw/intc/arm_gicv3: Honour GICD_CTLR.EnableGrp1NS for LPIs

The GICD_CTLR distributor register has enable bits which control
whether the different interrupt groups (Group 0, Non-secure Group 1
and Secure Group 1) are forwarded to the CPU.  We get this right for
traditional interrupts, but forgot to account for it when adding
LPIs.  LPIs are always Group 1 NS and if the EnableGrp1NS bit is not
set we must not forward them to the CPU.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-7-peter.maydell@linaro.org

hw/intc/arm_gicv3_its: Don't clear GITS_CWRITER on writes to GITS_CBASER

The ITS specification says that when the guest writes to GITS_CBASER
this causes GITS_CREADR to be cleared.  However it does not have an
equivalent clause for GITS_CWRITER.  (This is because GITS_CREADR is
read-only, but GITS_CWRITER is writable and the guest can initialize
it.) Remove the code that clears GITS_CWRITER on GITS_CBASER writes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-6-peter.maydell@linaro.org

hw/intc/arm_gicv3_its: Don't clear GITS_CREADR when GITS_CTLR.ENABLED is set

The current ITS code clears GITS_CREADR when GITS_CTLR.ENABLED is set.
This is not correct -- guest code can validly clear ENABLED and then
set it again and expect the ITS to continue processing where it left
off. Remove the erroneous assignment.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-5-peter.maydell@linaro.org

hw/intc/arm_gicv3: Initialise dma_as in GIC, not ITS

In our implementation, all ITSes connected to a GIC share a single
AddressSpace, which we keep in the GICv3State::dma_as field and
initialized based on the GIC's 'sysmem' property. The right place
to set it up by calling address_space_init() is therefore in the
GIC's realize method, not the ITS's realize.

This fixes a theoretical bug where QEMU hangs on startup if the board
model creates two ITSes connected to the same GIC -- we would call
address_space_init() twice on the same AddressSpace*, which creates
an infinite loop in the QTAILQ that softmmu/memory.c uses to store
its list of AddressSpaces and causes any subsequent attempt to
iterate through that list to loop forever.  There aren't any board
models like that in the tree at the moment, though.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-4-peter.maydell@linaro.org

hw/intc/arm_gicv3_its: Add tracepoints

The ITS currently has no tracepoints; add a minimal set
that allows basic monitoring of guest register accesses and
reading of commands from the command queue.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-3-peter.maydell@linaro.org

target/arm: Log CPU index in 'Taking exception' log

In an SMP system it can be unclear which CPU is taking an exception;
add the CPU index (which is the same value used in the TCG 'Trace
%d:' logging) to the "Taking exception" log line to clarify it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-2-peter.maydell@linaro.org

scripts: Explain the difference between linux-headers and standard-headers

If you don't know it, it's hard to figure out the difference between
the linux-headers folder and the include/standard-headers folder.
So let's add a short explanation to clarify the difference.

Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>

MAINTAINERS: Remove myself (for raspi).

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: MW4PR21MB1940E8BB52F4053C943B1FCD9E219@MW4PR21MB1940.namprd21.prod.outlook.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

MAINTAINERS: Add an entry for Xilinx Versal OSPI

List myself as maintainer for the Xilinx Versal OSPI controller.

Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220121161141.14389-11-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/xlnx-versal-virt: Connect mt35xu01g flashes to the OSPI

Connect Micron Xccela mt35xu01g flashes to the OSPI flash memory
controller.

Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220121161141.14389-10-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/block/m25p80: Add support for Micron Xccela flash mt35xu01g

Add support for Micron Xccela flash mt35xu01g.

Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20220121161141.14389-9-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/xlnx-versal: Connect the OSPI flash memory controller model

Connect the OSPI flash memory controller model (including the source and
destination DMA).

Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220121161141.14389-8-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/ssi: Add a model of Xilinx Versal's OSPI flash memory controller

Add a model of Xilinx Versal's OSPI flash memory controller.

Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20220121161141.14389-7-francisco.iglesias@xilinx.com
[PMM: fixed indent]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/dma/xlnx_csu_dma: Support starting a read transfer through a class method

An option on real hardware when embedding a DMA engine into a peripheral
is to make the peripheral control the engine through a custom DMA control
(hardware) interface between the two. Software drivers in this scenario
configure and trigger DMA operations through the controlling peripheral's
register API (for example, writing a specific bit in a register could
propagate down to a transfer start signal on the DMA control interface).
At the same time the status, results and interrupts for the transfer might
still be intended to be read and caught through the DMA engine's register
API (and signals).

This patch adds a class 'read' method for allowing to start read transfers
from peripherals embedding and controlling the Xilinx CSU DMA engine as in
above scenario.

Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20220121161141.14389-6-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

include/hw/dma/xlnx_csu_dma: Add in missing includes in the header

Add in the missing includes in the header for being able to build the DMA
model when reusing it.

Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20220121161141.14389-5-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/xlnx-versal: Connect Versal's PMC SLCR

Connect Versal's PMC SLCR (system-level control registers) model.

Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20220121161141.14389-4-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/xlnx-versal: 'Or' the interrupts from the BBRAM and RTC models

Add an orgate and 'or' the interrupts from the BBRAM and RTC models.

Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20220121161141.14389-3-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/misc: Add a model of Versal's PMC SLCR

Add a model of Versal's PMC SLCR (system-level control registers).

Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20220121161141.14389-2-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

rtc: Move RTC function prototypes to their own header

softmmu/rtc.c defines two public functions: qemu_get_timedate() and
qemu_timedate_diff().  Currently we keep the prototypes for these in
qemu-common.h, but most files don't need them.  Move them to their
own header, a new include/sysemu/rtc.h.

Since the C files using these two functions did not need to include
qemu-common.h for any other reason, we can remove those include lines
when we add the include of the new rtc.h.

The license for the .h file follows that of the softmmu/rtc.c
where both the functions are defined.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

hw/char/exynos4210_uart: Fix crash on trying to load VM state

The exynos4210_uart_post_load() function assumes that it is passed
the Exynos4210UartState, but it has been attached to the
VMStateDescription for the Exynos4210UartFIFO type.  The result is a
SIGSEGV when attempting to load VM state for any machine type
including this device.

Fix the bug by attaching the post-load function to the VMSD for the
Exynos4210UartState.  This is the logical place for it, because the
actions it does relate to the entire UART state, not just the FIFO.

Thanks to the bug reporter @TrungNguyen1909 for the clear bug
description and the suggested fix.

Fixes: c9d3396d80fe7ece9b
   ("hw/char/exynos4210_uart: Implement post_load function")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/638
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220120151648.433736-1-peter.maydell@linaro.org

hw/armv7m: Fix broken VMStateDescription

In commit d5093d961585f02 we added a VMStateDescription to
the TYPE_ARMV7M object, to handle migration of its Clocks.
However a cut-and-paste error meant we used the wrong struct
name in the VMSTATE_CLOCK() macro arguments. The result was
that attempting a 'savevm' might result in an assertion
failure.

Cc: qemu-stable@nongnu.org
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/803
Fixes: d5093d961585f02
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220120151609.433555-1-peter.maydell@linaro.org

Update copyright dates to 2022

It's a new year; update the copyright strings for our
help/version/about information and for our documentation.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220120124713.288303-1-peter.maydell@linaro.org

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* configure and meson fixes
* "meson test" switch for iotests
* deprecation of old SGX QAPI
* unexport InterruptStatsProviderClass-related functions

# gpg: Signature made Fri 28 Jan 2022 10:13:36 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream:
  configure: fix parameter expansion of --cross-cc-cflags options
  qapi: Cleanup SGX related comments and restore @section-size
  check-block: replace -makecheck with TAP output
  qemu-iotests: require at least an argument to check-block.sh
  build: make check-block a meson test
  scripts/mtest2make: add support for SPEED=thorough
  check-block.sh: passthrough -jN flag of make to -j N flag of check
  meson: Use find_program() to resolve the entitlement.sh script
  exec/cpu: Make host pages variables / macros 'target agnostic'
  meson.build: Use a function from libfdt 1.5.1 for the library check
  intc: Unexport InterruptStatsProviderClass-related functions
  docker: add msitools to Fedora/mingw cross
  build-sys: fix undefined ARCH error
  build-sys: fix a meson deprecation warning

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/ppc: 74xx: Set SRRs directly in exception code

The 74xx does not have alternate/hypervisor Save and Restore
Registers, so we can set SRR0 and SRR1 directly.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: 74xx: System Reset interrupt cleanup

The whole power saving states logic seems to be dependent on HV mode,
which don't exist for 74xx so I'm removing it all and leaving the
abort message.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-8-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: 74xx: System Call exception cleanup

Remove the BookE code and add a comment explaining why we need to keep
hypercall support even though this CPU does not have a hypervisor
mode.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-7-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: 74xx: Program exception cleanup

Remove the BookE ESR setting.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: 74xx: External interrupt cleanup

The 74xx don't have MSR_HV so all the LPES0 logic can be removed.

Also remove the BookE IRQ code.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: 74xx: Machine Check exception cleanup

The 74xx don't have an MSR_HV.

Also remove 40x and BookE code.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Simplify powerpc_excp_74xx

Differences from the generic powerpc_excp code:

- Not BookE, so some MSR bits are cleared at interrupt dispatch;
- No MSR_HV;
- No power saving states;
- No Hypervisor Emulation Assistance;
- Not 64 bits;
- No System call vectored;
- No Alternate Interrupt Location.

Exceptions used:

POWERPC_EXCP_ALIGN
POWERPC_EXCP_DECR
POWERPC_EXCP_DSI
POWERPC_EXCP_EXTERNAL
POWERPC_EXCP_FPU
POWERPC_EXCP_IABR
POWERPC_EXCP_ISI
POWERPC_EXCP_MCHECK
POWERPC_EXCP_PERFM
POWERPC_EXCP_PROGRAM
POWERPC_EXCP_RESET
POWERPC_EXCP_SMI
POWERPC_EXCP_SYSCALL
POWERPC_EXCP_THERM
POWERPC_EXCP_TRACE
POWERPC_EXCP_VPU
POWERPC_EXCP_VPUA

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Introduce powerpc_excp_74xx

Introduce a new powerpc_excp function specific for PowerPC 74xx
CPUs. This commit copies powerpc_excp_legacy verbatim so the next one
has a clean diff.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: books: Program exception cleanup

Remove setting of BookE registers.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220124184605.999353-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: books: External interrupt cleanup

Since this is now BookS only, we can simplify the code a bit and check
has_hv_mode instead of enumerating the exception models. LPES0 does
not make sense if there is no MSR_HV.

Note that QEMU does not support HV mode on 970 and POWER5+ so we don't
set MSR_HV in msr_mask.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220124184605.999353-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>