OSDN Git Service
Jakub Kicinski [Tue, 4 Jan 2022 03:50:16 +0000 (19:50 -0800)]
Merge tag 'batadv-net-pullrequest-
20220103' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- avoid sending link-local multicast to multicast routers,
by Linus Lüssing
* tag 'batadv-net-pullrequest-
20220103' of git://git.open-mesh.org/linux-merge:
batman-adv: mcast: don't send link-local multicast to mcast routers
====================
Link: https://lore.kernel.org/r/20220103171203.1124980-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Fainelli [Mon, 3 Jan 2022 19:34:52 +0000 (11:34 -0800)]
Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register"
This reverts commit
b45396afa4177f2b1ddfeff7185da733fade1dc3 ("net: phy:
fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register")
since it prevents any system that uses a fixed PHY without a GPIO
descriptor from properly working:
[ 5.971952] brcm-systemport
9300000.ethernet: failed to register fixed PHY
[ 5.978854] brcm-systemport: probe of
9300000.ethernet failed with error -22
[ 5.986047] brcm-systemport
9400000.ethernet: failed to register fixed PHY
[ 5.992947] brcm-systemport: probe of
9400000.ethernet failed with error -22
Fixes:
b45396afa417 ("net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220103193453.1214961-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Ahern [Mon, 3 Jan 2022 17:05:55 +0000 (10:05 -0700)]
ipv6: Do cleanup if attribute validation fails in multipath route
As Nicolas noted, if gateway validation fails walking the multipath
attribute the code should jump to the cleanup to free previously
allocated memory.
Fixes:
1ff15a710a86 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route")
Signed-off-by: David Ahern <dsahern@kernel.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220103170555.94638-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Ahern [Mon, 3 Jan 2022 17:19:11 +0000 (10:19 -0700)]
ipv6: Continue processing multipath route even if gateway attribute is invalid
ip6_route_multipath_del loop continues processing the multipath
attribute even if delete of a nexthop path fails. For consistency,
do the same if the gateway attribute is invalid.
Fixes:
1ff15a710a86 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route")
Signed-off-by: David Ahern <dsahern@kernel.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220103171911.94739-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Markus Koch [Sun, 2 Jan 2022 16:54:08 +0000 (17:54 +0100)]
net/fsl: Remove leftover definition in xgmac_mdio
commit
26eee0210ad7 ("net/fsl: fix a bug in xgmac_mdio") fixed a bug in
the QorIQ mdio driver but left the (now unused) incorrect bit definition
for MDIO_DATA_BSY in the code. This commit removes it.
Signed-off-by: Markus Koch <markus@notsyncing.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Toye [Sat, 1 Jan 2022 17:22:07 +0000 (18:22 +0100)]
rndis_host: support Hytera digital radios
Hytera makes a range of digital (DMR) radios. These radios can be
programmed to a allow a computer to control them over Ethernet over USB,
either using NCM or RNDIS.
This commit adds support for RNDIS for Hytera radios. I tested with a
Hytera PD785 and a Hytera MD785G. When these radios are programmed to
set up a Radio to PC Network using RNDIS, an USB interface will be added
with class 2 (Communications), subclass 2 (Abstract Modem Control) and
an interface protocol of 255 ("vendor specific" - lsusb even hints "MSFT
RNDIS?").
This patch is similar to the solution of this StackOverflow user, but
that only works for the Hytera MD785:
https://stackoverflow.com/a/
53550858
To use the "Radio to PC Network" functionality of Hytera DMR radios, the
radios need to be programmed correctly in CPS (Hytera's Customer
Programming Software). "Forward to PC" should be checked in "Network"
(under "General Setting" in "Conventional") and the "USB Network
Communication Protocol" should be set to RNDIS.
Signed-off-by: Thomas Toye <thomas@toye.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 31 Dec 2021 23:37:37 +0000 (18:37 -0500)]
sctp: hold endpoint before calling cb in sctp_transport_lookup_process
The same fix in commit
5ec7d18d1813 ("sctp: use call_rcu to free endpoint")
is also needed for dumping one asoc and sock after the lookup.
Fixes:
86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 2 Jan 2022 12:45:13 +0000 (12:45 +0000)]
Merge branch 'ena-fixes'
Arthur Kiyanovski says:
====================
ENA driver bug fixes
Patchset V2 chages:
-------------------
Updated SHA1 of Fixes tag in patch 3/3 to be 12 digits long
Original cover letter:
----------------------
ENA driver bug fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Arthur Kiyanovski [Sun, 2 Jan 2022 07:37:28 +0000 (07:37 +0000)]
net: ena: Fix error handling when calculating max IO queues number
The role of ena_calc_max_io_queue_num() is to return the number
of queues supported by the device, which means the return value
should be >=0.
The function that calls ena_calc_max_io_queue_num(), checks
the return value. If it is 0, it means the device reported
it supports 0 IO queues. This case is considered an error
and is handled by the calling function accordingly.
However the current implementation of ena_calc_max_io_queue_num()
is wrong, since when it detects the device supports 0 IO queues,
it returns -EFAULT.
In such a case the calling function doesn't detect the error,
and therefore doesn't handle it.
This commit changes ena_calc_max_io_queue_num() to return 0
in case the device reported it supports 0 queues, allowing the
calling function to properly handle the error case.
Fixes:
736ce3f414cc ("net: ena: make ethtool -l show correct max number of queues")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arthur Kiyanovski [Sun, 2 Jan 2022 07:37:27 +0000 (07:37 +0000)]
net: ena: Fix wrong rx request id by resetting device
A wrong request id received from the device is a sign that
something is wrong with it, therefore trigger a device reset.
Also add some debug info to the "Page is NULL" print to make
it easier to debug.
Fixes:
1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arthur Kiyanovski [Sun, 2 Jan 2022 07:37:26 +0000 (07:37 +0000)]
net: ena: Fix undefined state when tx request id is out of bounds
ena_com_tx_comp_req_id_get() checks the req_id of a received completion,
and if it is out of bounds returns -EINVAL. This is a sign that
something is wrong with the device and it needs to be reset.
The current code does not reset the device in this case, which leaves
the driver in an undefined state, where this completion is not properly
handled.
This commit adds a call to handle_invalid_req_id() in ena_clean_tx_irq()
and ena_clean_xdp_irq() which resets the device to fix the issue.
This commit also removes unnecessary request id checks from
validate_tx_req_id() and validate_xdp_req_id(). This check is unneeded
because it was already performed in ena_com_tx_comp_req_id_get(), which
is called right before these functions.
Fixes:
548c4940b9f1 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gagan Kumar [Sat, 1 Jan 2022 05:41:25 +0000 (11:11 +0530)]
mctp: Remove only static neighbour on RTM_DELNEIGH
Add neighbour source flag in mctp_neigh_remove(...) to allow removal of
only static neighbours.
This should be a no-op change and might be useful later when mctp can
have MCTP_NEIGH_DISCOVER neighbours.
Signed-off-by: Gagan Kumar <gagan1kumar.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Lüssing [Sat, 1 Jan 2022 05:27:13 +0000 (06:27 +0100)]
batman-adv: mcast: don't send link-local multicast to mcast routers
The addition of routable multicast TX handling introduced a
bug/regression for packets with a link-local multicast destination:
These packets would be sent to all batman-adv nodes with a multicast
router and to all batman-adv nodes with an old version without multicast
router detection.
This even disregards the batman-adv multicast fanout setting, which can
potentially lead to an unwanted, high number of unicast transmissions or
even congestion.
Fixing this by avoiding to send link-local multicast packets to nodes in
the multicast router list.
Fixes:
11d458c1cb9b ("batman-adv: mcast: apply optimizations for routable packets, too")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Haimin Zhang [Fri, 31 Dec 2021 02:35:23 +0000 (10:35 +0800)]
net ticp:fix a kernel-infoleak in __tipc_sendmsg()
struct tipc_socket_addr.ref has a 4-byte hole,and __tipc_getname() currently
copying it to user space,causing kernel-infoleak.
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline] lib/usercopy.c:33
BUG: KMSAN: kernel-infoleak in _copy_to_user+0x1c9/0x270 lib/usercopy.c:33 lib/usercopy.c:33
instrument_copy_to_user include/linux/instrumented.h:121 [inline]
instrument_copy_to_user include/linux/instrumented.h:121 [inline] lib/usercopy.c:33
_copy_to_user+0x1c9/0x270 lib/usercopy.c:33 lib/usercopy.c:33
copy_to_user include/linux/uaccess.h:209 [inline]
copy_to_user include/linux/uaccess.h:209 [inline] net/socket.c:287
move_addr_to_user+0x3f6/0x600 net/socket.c:287 net/socket.c:287
__sys_getpeername+0x470/0x6b0 net/socket.c:1987 net/socket.c:1987
__do_sys_getpeername net/socket.c:1997 [inline]
__se_sys_getpeername net/socket.c:1994 [inline]
__do_sys_getpeername net/socket.c:1997 [inline] net/socket.c:1994
__se_sys_getpeername net/socket.c:1994 [inline] net/socket.c:1994
__x64_sys_getpeername+0xda/0x120 net/socket.c:1994 net/socket.c:1994
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_x64 arch/x86/entry/common.c:51 [inline] arch/x86/entry/common.c:82
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was stored to memory at:
tipc_getname+0x575/0x5e0 net/tipc/socket.c:757 net/tipc/socket.c:757
__sys_getpeername+0x3b3/0x6b0 net/socket.c:1984 net/socket.c:1984
__do_sys_getpeername net/socket.c:1997 [inline]
__se_sys_getpeername net/socket.c:1994 [inline]
__do_sys_getpeername net/socket.c:1997 [inline] net/socket.c:1994
__se_sys_getpeername net/socket.c:1994 [inline] net/socket.c:1994
__x64_sys_getpeername+0xda/0x120 net/socket.c:1994 net/socket.c:1994
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_x64 arch/x86/entry/common.c:51 [inline] arch/x86/entry/common.c:82
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was stored to memory at:
msg_set_word net/tipc/msg.h:212 [inline]
msg_set_destport net/tipc/msg.h:619 [inline]
msg_set_word net/tipc/msg.h:212 [inline] net/tipc/socket.c:1486
msg_set_destport net/tipc/msg.h:619 [inline] net/tipc/socket.c:1486
__tipc_sendmsg+0x44fa/0x5890 net/tipc/socket.c:1486 net/tipc/socket.c:1486
tipc_sendmsg+0xeb/0x140 net/tipc/socket.c:1402 net/tipc/socket.c:1402
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
sock_sendmsg_nosec net/socket.c:704 [inline] net/socket.c:2409
sock_sendmsg net/socket.c:724 [inline] net/socket.c:2409
____sys_sendmsg+0xe11/0x12c0 net/socket.c:2409 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
___sys_sendmsg net/socket.c:2463 [inline] net/socket.c:2492
__sys_sendmsg+0x704/0x840 net/socket.c:2492 net/socket.c:2492
__do_sys_sendmsg net/socket.c:2501 [inline]
__se_sys_sendmsg net/socket.c:2499 [inline]
__do_sys_sendmsg net/socket.c:2501 [inline] net/socket.c:2499
__se_sys_sendmsg net/socket.c:2499 [inline] net/socket.c:2499
__x64_sys_sendmsg+0xe2/0x120 net/socket.c:2499 net/socket.c:2499
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_x64 arch/x86/entry/common.c:51 [inline] arch/x86/entry/common.c:82
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Local variable skaddr created at:
__tipc_sendmsg+0x2d0/0x5890 net/tipc/socket.c:1419 net/tipc/socket.c:1419
tipc_sendmsg+0xeb/0x140 net/tipc/socket.c:1402 net/tipc/socket.c:1402
Bytes 4-7 of 16 are uninitialized
Memory access of size 16 starts at
ffff888113753e00
Data copied to user address
0000000020000280
Reported-by: syzbot+cdbd40e0c3ca02cae3b7@syzkaller.appspotmail.com
Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Link: https://lore.kernel.org/r/1640918123-14547-1-git-send-email-tcs.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jianguo Wu [Fri, 31 Dec 2021 02:01:08 +0000 (10:01 +0800)]
selftests: net: udpgro_fwd.sh: explicitly checking the available ping feature
As Paolo pointed out, the result of ping IPv6 address depends on
the running distro. So explicitly checking the available ping feature,
as e.g. do the bareudp.sh self-tests.
Fixes:
8b3170e07539 ("selftests: net: using ping6 for IPv6 in udpgro_fwd.sh")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Link: https://lore.kernel.org/r/825ee22b-4245-dbf7-d2f7-a230770d6e21@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 1 Jan 2022 02:35:53 +0000 (18:35 -0800)]
Merge https://git./linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2021-12-31
We've added 2 non-merge commits during the last 14 day(s) which contain
a total of 2 files changed, 3 insertions(+), 3 deletions(-).
The main changes are:
1) Revert of an earlier attempt to fix xsk's poll() behavior where it
turned out that the fix for a rare problem made it much worse in
general, from Magnus Karlsson. (Fyi, Magnus mentioned that a proper
fix is coming early next year, so the revert is mainly to avoid
slipping the behavior into 5.16.)
2) Minor misc spell fix in BPF selftests, from Colin Ian King.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, selftests: Fix spelling mistake "tained" -> "tainted"
Revert "xsk: Do not sleep in poll() when need_wakeup set"
====================
Link: https://lore.kernel.org/r/20211231160050.16105-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David S. Miller [Fri, 31 Dec 2021 14:32:00 +0000 (14:32 +0000)]
Merge branch 'mpr-len-checks'
David Ahern says:
====================
net: Length checks for attributes within multipath routes
Add length checks for attributes within a multipath route (attributes
within RTA_MULTIPATH). Motivated by the syzbot report in patch 1 and
then expanded to other attributes as noted by Ido.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Fri, 31 Dec 2021 00:36:35 +0000 (17:36 -0700)]
lwtunnel: Validate RTA_ENCAP_TYPE attribute length
lwtunnel_valid_encap_type_attr is used to validate encap attributes
within a multipath route. Add length validation checking to the type.
lwtunnel_valid_encap_type_attr is called converting attributes to
fib{6,}_config struct which means it is used before fib_get_nhs,
ip6_route_multipath_add, and ip6_route_multipath_del - other
locations that use rtnh_ok and then nla_get_u16 on RTA_ENCAP_TYPE
attribute.
Fixes:
9ed59592e3e3 ("lwtunnel: fix autoload of lwt modules")
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Fri, 31 Dec 2021 00:36:34 +0000 (17:36 -0700)]
ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route
Make sure RTA_GATEWAY for IPv6 multipath route has enough bytes to hold
an IPv6 address.
Fixes:
6b9ea5a64ed5 ("ipv6: fix multipath route replace error recovery")
Signed-off-by: David Ahern <dsahern@kernel.org>
Cc: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Fri, 31 Dec 2021 00:36:33 +0000 (17:36 -0700)]
ipv6: Check attribute length for RTA_GATEWAY in multipath route
Commit referenced in the Fixes tag used nla_memcpy for RTA_GATEWAY as
does the current nla_get_in6_addr. nla_memcpy protects against accessing
memory greater than what is in the attribute, but there is no check
requiring the attribute to have an IPv6 address. Add it.
Fixes:
51ebd3181572 ("ipv6: add support of equal cost multipath (ECMP)")
Signed-off-by: David Ahern <dsahern@kernel.org>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Fri, 31 Dec 2021 00:36:32 +0000 (17:36 -0700)]
ipv4: Check attribute length for RTA_FLOW in multipath route
Make sure RTA_FLOW is at least 4B before using.
Fixes:
4e902c57417c ("[IPv4]: FIB configuration using struct fib_config")
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Fri, 31 Dec 2021 00:36:31 +0000 (17:36 -0700)]
ipv4: Check attribute length for RTA_GATEWAY in multipath route
syzbot reported uninit-value:
============================================================
BUG: KMSAN: uninit-value in fib_get_nhs+0xac4/0x1f80
net/ipv4/fib_semantics.c:708
fib_get_nhs+0xac4/0x1f80 net/ipv4/fib_semantics.c:708
fib_create_info+0x2411/0x4870 net/ipv4/fib_semantics.c:1453
fib_table_insert+0x45c/0x3a10 net/ipv4/fib_trie.c:1224
inet_rtm_newroute+0x289/0x420 net/ipv4/fib_frontend.c:886
Add helper to validate RTA_GATEWAY length before using the attribute.
Fixes:
4e902c57417c ("[IPv4]: FIB configuration using struct fib_config")
Reported-by: syzbot+d4b9a2851cc3ce998741@syzkaller.appspotmail.com
Signed-off-by: David Ahern <dsahern@kernel.org>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 30 Dec 2021 19:12:12 +0000 (11:12 -0800)]
Merge tag 'net-5.16-rc8' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from.. Santa?
No regressions on our radar at this point. The igc problem fixed here
was the last one I was tracking but it was broken in previous
releases, anyway. Mostly driver fixes and a couple of largish SMC
fixes.
Current release - regressions:
- xsk: initialise xskb free_list_node, fixup for a -rc7 fix
Current release - new code bugs:
- mlx5: handful of minor fixes:
- use first online CPU instead of hard coded CPU
- fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'
- fix skb memory leak when TC classifier action offloads are disabled
- fix memory leak with rules with internal OvS port
Previous releases - regressions:
- igc: do not enable crosstimestamping for i225-V models
Previous releases - always broken:
- udp: use datalen to cap ipv6 udp max gso segments
- fix use-after-free in tw_timer_handler due to early free of stats
- smc: fix kernel panic caused by race of smc_sock
- smc: don't send CDC/LLC message if link not ready, avoid timeouts
- sctp: use call_rcu to free endpoint, avoid UAF in sock diag
- bridge: mcast: add and enforce query interval minimum
- usb: pegasus: do not drop long Ethernet frames
- mlx5e: fix ICOSQ recovery flow for XSK
- nfc: uapi: use kernel size_t to fix user-space builds"
* tag 'net-5.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
fsl/fman: Fix missing put_device() call in fman_port_probe
selftests: net: using ping6 for IPv6 in udpgro_fwd.sh
Documentation: fix outdated interpretation of ip_no_pmtu_disc
net/ncsi: check for error return from call to nla_put_u32
net: bridge: mcast: fix br_multicast_ctx_vlan_global_disabled helper
net: fix use-after-free in tw_timer_handler
selftests: net: Fix a typo in udpgro_fwd.sh
selftests/net: udpgso_bench_tx: fix dst ip argument
net: bridge: mcast: add and enforce startup query interval minimum
net: bridge: mcast: add and enforce query interval minimum
ipv6: raw: check passed optlen before reading
xsk: Initialise xskb free_list_node
net/mlx5e: Fix wrong features assignment in case of error
net/mlx5e: TC, Fix memory leak with rules with internal port
ionic: Initialize the 'lif->dbid_inuse' bitmap
igc: Fix TX timestamp support for non-MSI-X platforms
igc: Do not enable crosstimestamping for i225-V models
net/smc: fix kernel panic caused by race of smc_sock
net/smc: don't send CDC/LLC message if link not ready
NFC: st21nfca: Fix memory leak in device probe and remove
...
Linus Torvalds [Thu, 30 Dec 2021 17:52:32 +0000 (09:52 -0800)]
Merge tag 'char-misc-5.16' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are two misc driver fixes for 5.16-final:
- binder accounting fix to resolve reported problem
- nitro_enclaves fix for mmap assert warning output
Both of these have been for over a week with no reported issues"
* tag 'char-misc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
nitro_enclaves: Use get_user_pages_unlocked() call to handle mmap assert
binder: fix async_free_space accounting for empty parcels
Linus Torvalds [Thu, 30 Dec 2021 17:49:54 +0000 (09:49 -0800)]
Merge tag 'usb-5.16' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 5.16 to resolve some reported
problems:
- mtu3 driver fixes
- typec ucsi driver fix
- xhci driver quirk added
- usb gadget f_fs fix for reported crash
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Only check the contract if there is a connection
xhci: Fresco FL1100 controller should not have BROKEN_MSI quirk set.
usb: mtu3: set interval of FS intr and isoc endpoint
usb: mtu3: fix list_head check warning
usb: mtu3: add memory barrier before set GPD's HWO
usb: mtu3: fix interval value for intr and isoc
usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_clear.
Miaoqian Lin [Thu, 30 Dec 2021 12:26:27 +0000 (12:26 +0000)]
fsl/fman: Fix missing put_device() call in fman_port_probe
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the and error handling paths.
Fixes:
18a6c85fcc78 ("fsl/fman: Add FMan Port Support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jianguo Wu [Thu, 30 Dec 2021 10:40:29 +0000 (18:40 +0800)]
selftests: net: using ping6 for IPv6 in udpgro_fwd.sh
udpgro_fwd.sh output following message:
ping: 2001:db8:1::100: Address family for hostname not supported
Using ping6 when pinging IPv6 addresses.
Fixes:
a062260a9d5f ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
xu xin [Thu, 30 Dec 2021 03:28:56 +0000 (03:28 +0000)]
Documentation: fix outdated interpretation of ip_no_pmtu_disc
The updating way of pmtu has changed, but documentation is still in the
old way. So this patch updates the interpretation of ip_no_pmtu_disc and
min_pmtu.
See commit
28d35bcdd3925 ("net: ipv4: don't let PMTU updates increase
route MTU")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 30 Dec 2021 02:19:01 +0000 (18:19 -0800)]
Merge tag 'mlx5-fixes-2021-12-28' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2021-12-28
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2021-12-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Fix wrong features assignment in case of error
net/mlx5e: TC, Fix memory leak with rules with internal port
====================
Link: https://lore.kernel.org/r/20211229065352.30178-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiasheng Jiang [Wed, 29 Dec 2021 03:21:18 +0000 (11:21 +0800)]
net/ncsi: check for error return from call to nla_put_u32
As we can see from the comment of the nla_put() that it could return
-EMSGSIZE if the tailroom of the skb is insufficient.
Therefore, it should be better to check the return value of the
nla_put_u32 and return the error code if error accurs.
Also, there are many other functions have the same problem, and if this
patch is correct, I will commit a new version to fix all.
Fixes:
955dc68cb9b2 ("net/ncsi: Add generic netlink family")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20211229032118.1706294-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Tue, 28 Dec 2021 15:31:42 +0000 (17:31 +0200)]
net: bridge: mcast: fix br_multicast_ctx_vlan_global_disabled helper
We need to first check if the context is a vlan one, then we need to
check the global bridge multicast vlan snooping flag, and finally the
vlan's multicast flag, otherwise we will unnecessarily enable vlan mcast
processing (e.g. querier timers).
Fixes:
7b54aaaf53cb ("net: bridge: multicast: add vlan state initialization and control")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20211228153142.536969-1-nikolay@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Muchun Song [Tue, 28 Dec 2021 10:41:45 +0000 (18:41 +0800)]
net: fix use-after-free in tw_timer_handler
A real world panic issue was found as follow in Linux 5.4.
BUG: unable to handle page fault for address:
ffffde49a863de28
PGD
7e6fe62067 P4D
7e6fe62067 PUD
7e6fe63067 PMD
f51e064067 PTE 0
RIP: 0010:tw_timer_handler+0x20/0x40
Call Trace:
<IRQ>
call_timer_fn+0x2b/0x120
run_timer_softirq+0x1ef/0x450
__do_softirq+0x10d/0x2b8
irq_exit+0xc7/0xd0
smp_apic_timer_interrupt+0x68/0x120
apic_timer_interrupt+0xf/0x20
This issue was also reported since 2017 in the thread [1],
unfortunately, the issue was still can be reproduced after fixing
DCCP.
The ipv4_mib_exit_net is called before tcp_sk_exit_batch when a net
namespace is destroyed since tcp_sk_ops is registered befrore
ipv4_mib_ops, which means tcp_sk_ops is in the front of ipv4_mib_ops
in the list of pernet_list. There will be a use-after-free on
net->mib.net_statistics in tw_timer_handler after ipv4_mib_exit_net
if there are some inflight time-wait timers.
This bug is not introduced by commit
f2bf415cfed7 ("mib: add net to
NET_ADD_STATS_BH") since the net_statistics is a global variable
instead of dynamic allocation and freeing. Actually, commit
61a7e26028b9 ("mib: put net statistics on struct net") introduces
the bug since it put net statistics on struct net and free it when
net namespace is destroyed.
Moving init_ipv4_mibs() to the front of tcp_init() to fix this bug
and replace pr_crit() with panic() since continuing is meaningless
when init_ipv4_mibs() fails.
[1] https://groups.google.com/g/syzkaller/c/p1tn-_Kc6l4/m/smuL_FMAAgAJ?pli=1
Fixes:
61a7e26028b9 ("mib: put net statistics on struct net")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Cong Wang <cong.wang@bytedance.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211228104145.9426-1-songmuchun@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jianguo Wu [Wed, 29 Dec 2021 07:27:30 +0000 (15:27 +0800)]
selftests: net: Fix a typo in udpgro_fwd.sh
$rvs -> $rcv
Fixes:
a062260a9d5f ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Link: https://lore.kernel.org/r/d247d7c8-a03a-0abf-3c71-4006a051d133@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wujianguo [Wed, 29 Dec 2021 10:58:10 +0000 (18:58 +0800)]
selftests/net: udpgso_bench_tx: fix dst ip argument
udpgso_bench_tx call setup_sockaddr() for dest address before
parsing all arguments, if we specify "-p ${dst_port}" after "-D ${dst_ip}",
then ${dst_port} will be ignored, and using default cfg_port 8000.
This will cause test case "multiple GRO socks" failed in udpgro.sh.
Setup sockaddr after parsing all arguments.
Fixes:
3a687bef148d ("selftests: udp gso benchmark")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/ff620d9f-5b52-06ab-5286-44b945453002@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 29 Dec 2021 20:59:43 +0000 (12:59 -0800)]
Merge branch 'net-bridge-mcast-add-and-enforce-query-interval-minimum'
Nikolay Aleksandrov says:
====================
net: bridge: mcast: add and enforce query interval minimum
This set adds and enforces 1 second minimum value for bridge multicast
query and startup query intervals in order to avoid rearming the timers
too often which could lock and crash the host. I doubt anyone is using
such low values or anything lower than 1 second, so it seems like a good
minimum. In order to be compatible if the value is lower then it is
overwritten and a log message is emitted, since we can't return an error
at this point.
Eric, I looked for the syzbot reports in its dashboard but couldn't find
them so I've added you as the reporter.
I've prepared a global bridge igmp rate limiting patch but wasn't
sure if it's ok for -net. It adds a static limit of 32k packets per
second, I plan to send it for net-next with added drop counters for
each bridge so it can be easily debugged.
Original report can be seen at:
https://lore.kernel.org/netdev/
e8b9ce41-57b9-b6e2-a46a-
ff9c791cf0ba@gmail.com/
====================
Link: https://lore.kernel.org/r/20211227172116.320768-1-nikolay@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Mon, 27 Dec 2021 17:21:16 +0000 (19:21 +0200)]
net: bridge: mcast: add and enforce startup query interval minimum
As reported[1] if startup query interval is set too low in combination with
large number of startup queries and we have multiple bridges or even a
single bridge with multiple querier vlans configured we can crash the
machine. Add a 1 second minimum which must be enforced by overwriting the
value if set lower (i.e. without returning an error) to avoid breaking
user-space. If that happens a log message is emitted to let the admin know
that the startup interval has been set to the minimum. It doesn't make
sense to make the startup interval lower than the normal query interval
so use the same value of 1 second. The issue has been present since these
intervals could be user-controlled.
[1] https://lore.kernel.org/netdev/
e8b9ce41-57b9-b6e2-a46a-
ff9c791cf0ba@gmail.com/
Fixes:
d902eee43f19 ("bridge: Add multicast count/interval sysfs entries")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Mon, 27 Dec 2021 17:21:15 +0000 (19:21 +0200)]
net: bridge: mcast: add and enforce query interval minimum
As reported[1] if query interval is set too low and we have multiple
bridges or even a single bridge with multiple querier vlans configured
we can crash the machine. Add a 1 second minimum which must be enforced
by overwriting the value if set lower (i.e. without returning an error) to
avoid breaking user-space. If that happens a log message is emitted to let
the administrator know that the interval has been set to the minimum.
The issue has been present since these intervals could be user-controlled.
[1] https://lore.kernel.org/netdev/
e8b9ce41-57b9-b6e2-a46a-
ff9c791cf0ba@gmail.com/
Fixes:
d902eee43f19 ("bridge: Add multicast count/interval sysfs entries")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tamir Duberstein [Wed, 29 Dec 2021 20:09:47 +0000 (15:09 -0500)]
ipv6: raw: check passed optlen before reading
Add a check that the user-provided option is at least as long as the
number of bytes we intend to read. Before this patch we would blindly
read sizeof(int) bytes even in cases where the user passed
optlen<sizeof(int), which would potentially read garbage or fault.
Discovered by new tests in https://github.com/google/gvisor/pull/6957 .
The original get_user call predates history in the git repo.
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211229200947.2862255-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 29 Dec 2021 18:07:20 +0000 (10:07 -0800)]
Merge tag 's390-5.16-6' of git://git./linux/kernel/git/s390/linux
Pull s390 fix from Heiko Carstens:
- fix s390 mcount regex typo in recordmcount.pl
* tag 's390-5.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
recordmcount.pl: fix typo in s390 mcount regex
Ciara Loftus [Mon, 20 Dec 2021 15:52:50 +0000 (15:52 +0000)]
xsk: Initialise xskb free_list_node
This commit initialises the xskb's free_list_node when the xskb is
allocated. This prevents a potential false negative returned from a call
to list_empty for that node, such as the one introduced in commit
199d983bc015 ("xsk: Fix crash on double free in buffer pool")
In my environment this issue caused packets to not be received by
the xdpsock application if the traffic was running prior to application
launch. This happened when the first batch of packets failed the xskmap
lookup and XDP_PASS was returned from the bpf program. This action is
handled in the i40e zc driver (and others) by allocating an skbuff,
freeing the xdp_buff and adding the associated xskb to the
xsk_buff_pool's free_list if it hadn't been added already. Without this
fix, the xskb is not added to the free_list because the check to determine
if it was added already returns an invalid positive result. Later, this
caused allocation errors in the driver and the failure to receive packets.
Fixes:
199d983bc015 ("xsk: Fix crash on double free in buffer pool")
Fixes:
2b43470add8c ("xsk: Introduce AF_XDP buffer allocation API")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20211220155250.2746-1-ciara.loftus@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gal Pressman [Mon, 29 Nov 2021 09:08:41 +0000 (11:08 +0200)]
net/mlx5e: Fix wrong features assignment in case of error
In case of an error in mlx5e_set_features(), 'netdev->features' must be
updated with the correct state of the device to indicate which features
were updated successfully.
To do that we maintain a copy of 'netdev->features' and update it after
successful feature changes, so we can assign it to back to
'netdev->features' if needed.
However, since not all netdev features are handled by the driver (e.g.
GRO/TSO/etc), some features may not be updated correctly in case of an
error updating another feature.
For example, while requesting to disable TSO (feature which is not
handled by the driver) and enable HW-GRO, if an error occurs during
HW-GRO enable, 'oper_features' will be assigned with 'netdev->features'
and HW-GRO turned off. TSO will remain enabled in such case, which is a
bug.
To solve that, instead of using 'netdev->features' as the baseline of
'oper_features' and changing it on set feature success, use 'features'
instead and update it in case of errors.
Fixes:
75b81ce719b7 ("net/mlx5e: Don't override netdev features field unless in error flow")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Wed, 22 Dec 2021 07:20:58 +0000 (09:20 +0200)]
net/mlx5e: TC, Fix memory leak with rules with internal port
Fix a memory leak with decap rule with internal port as destination
device. The driver allocates a modify hdr action but doesn't set
the flow attr modify hdr action which results in skipping releasing
the modify hdr action when releasing the flow.
backtrace:
[<
000000005f8c651c>] krealloc+0x83/0xd0
[<
000000009f59b143>] alloc_mod_hdr_actions+0x156/0x310 [mlx5_core]
[<
000000002257f342>] mlx5e_tc_match_to_reg_set_and_get_id+0x12a/0x360 [mlx5_core]
[<
00000000b44ea75a>] mlx5e_tc_add_fdb_flow+0x962/0x1470 [mlx5_core]
[<
0000000003e384a0>] __mlx5e_add_fdb_flow+0x54c/0xb90 [mlx5_core]
[<
00000000ed8b22b6>] mlx5e_configure_flower+0xe45/0x4af0 [mlx5_core]
[<
00000000024f4ab5>] mlx5e_rep_indr_offload.isra.0+0xfe/0x1b0 [mlx5_core]
[<
000000006c3bb494>] mlx5e_rep_indr_setup_tc_cb+0x90/0x130 [mlx5_core]
[<
00000000d3dac2ea>] tc_setup_cb_add+0x1d2/0x420
Fixes:
b16eb3c81fe2 ("net/mlx5: Support internal port as decap route device")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Jakub Kicinski [Wed, 29 Dec 2021 00:19:09 +0000 (16:19 -0800)]
Merge branch '1GbE' of git://git./linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-12-28
This series contains updates to igc driver only.
Vinicius disables support for crosstimestamp on i225-V as lockups are being
observed.
James McLaughlin fixes Tx timestamping support on non-MSI-X platforms.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: Fix TX timestamp support for non-MSI-X platforms
igc: Do not enable crosstimestamping for i225-V models
====================
Link: https://lore.kernel.org/r/20211228182421.340354-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christophe JAILLET [Sun, 26 Dec 2021 14:06:17 +0000 (15:06 +0100)]
ionic: Initialize the 'lif->dbid_inuse' bitmap
When allocated, this bitmap is not initialized. Only the first bit is set a
few lines below.
Use bitmap_zalloc() to make sure that it is cleared before being used.
Fixes:
6461b446f2a0 ("ionic: Add interrupts and doorbells")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/6a478eae0b5e6c63774e1f0ddb1a3f8c38fa8ade.1640527506.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Tue, 28 Dec 2021 21:33:06 +0000 (13:33 -0800)]
Merge tag 'selinux-pr-
20211228' of git://git./linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"One more small SELinux patch to address an uninitialized stack
variable"
* tag 'selinux-pr-
20211228' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: initialize proto variable in selinux_ip_postroute_compat()
Linus Torvalds [Tue, 28 Dec 2021 19:46:15 +0000 (11:46 -0800)]
Merge tag 'auxdisplay-for-linus-v5.16' of git://github.com/ojeda/linux
Pull auxdisplay fixes from Miguel Ojeda:
"A couple of improvements for charlcd:
- check pointer before dereferencing
- fix coding style issue"
* tag 'auxdisplay-for-linus-v5.16' of git://github.com/ojeda/linux:
auxdisplay: charlcd: checking for pointer reference before dereferencing
auxdisplay: charlcd: fixing coding style issue
Linus Torvalds [Tue, 28 Dec 2021 19:42:01 +0000 (11:42 -0800)]
Merge tag 'powerpc-5.16-5' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"Fix DEBUG_WX never reporting any WX mappings, due to use of an
incorrect config symbol since we converted to using generic ptdump"
* tag 'powerpc-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/ptdump: Fix DEBUG_WX since generic ptdump conversion
James McLaughlin [Fri, 17 Dec 2021 23:49:33 +0000 (16:49 -0700)]
igc: Fix TX timestamp support for non-MSI-X platforms
Time synchronization was not properly enabled on non-MSI-X platforms.
Fixes:
2c344ae24501 ("igc: Add support for TX timestamping")
Signed-off-by: James McLaughlin <james.mclaughlin@qsc.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Vinicius Costa Gomes [Tue, 14 Dec 2021 00:39:49 +0000 (16:39 -0800)]
igc: Do not enable crosstimestamping for i225-V models
It was reported that when PCIe PTM is enabled, some lockups could
be observed with some integrated i225-V models.
While the issue is investigated, we can disable crosstimestamp for
those models and see no loss of functionality, because those models
don't have any support for time synchronization.
Fixes:
a90ec8483732 ("igc: Add support for PTP getcrosststamp()")
Link: https://lore.kernel.org/all/924175a188159f4e03bd69908a91e606b574139b.camel@gmx.de/
Reported-by: Stefan Dietrich <roots@gmx.de>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
David S. Miller [Tue, 28 Dec 2021 12:42:46 +0000 (12:42 +0000)]
Merge branch 'smc-fixes'
Dust Li says:
====================
net/smc: fix kernel panic caused by race of smc_sock
This patchset fixes the race between smc_release triggered by
close(2) and cdc_handle triggered by underlaying RDMA device.
The race is caused because the smc_connection may been released
before the pending tx CDC messages got its CQEs. In order to fix
this, I add a counter to track how many pending WRs we have posted
through the smc_connection, and only release the smc_connection
after there is no pending WRs on the connection.
The first patch prevents posting WR on a QP that is not in RTS
state. This patch is needed because if we post WR on a QP that
is not in RTS state, ib_post_send() may success but no CQE will
return, and that will confuse the counter tracking the pending
WRs.
The second patch add a counter to track how many WRs were posted
through the smc_connection, and don't reset the QP on link destroying
to prevent leak of the counter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Dust Li [Tue, 28 Dec 2021 09:03:25 +0000 (17:03 +0800)]
net/smc: fix kernel panic caused by race of smc_sock
A crash occurs when smc_cdc_tx_handler() tries to access smc_sock
but smc_release() has already freed it.
[ 4570.695099] BUG: unable to handle page fault for address:
000000002eae9e88
[ 4570.696048] #PF: supervisor write access in kernel mode
[ 4570.696728] #PF: error_code(0x0002) - not-present page
[ 4570.697401] PGD 0 P4D 0
[ 4570.697716] Oops: 0002 [#1] PREEMPT SMP NOPTI
[ 4570.698228] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-rc4+ #111
[ 4570.699013] Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS
8c24b4c 04/0
[ 4570.699933] RIP: 0010:_raw_spin_lock+0x1a/0x30
<...>
[ 4570.711446] Call Trace:
[ 4570.711746] <IRQ>
[ 4570.711992] smc_cdc_tx_handler+0x41/0xc0
[ 4570.712470] smc_wr_tx_tasklet_fn+0x213/0x560
[ 4570.712981] ? smc_cdc_tx_dismisser+0x10/0x10
[ 4570.713489] tasklet_action_common.isra.17+0x66/0x140
[ 4570.714083] __do_softirq+0x123/0x2f4
[ 4570.714521] irq_exit_rcu+0xc4/0xf0
[ 4570.714934] common_interrupt+0xba/0xe0
Though smc_cdc_tx_handler() checked the existence of smc connection,
smc_release() may have already dismissed and released the smc socket
before smc_cdc_tx_handler() further visits it.
smc_cdc_tx_handler() |smc_release()
if (!conn) |
|
|smc_cdc_tx_dismiss_slots()
| smc_cdc_tx_dismisser()
|
|sock_put(&smc->sk) <- last sock_put,
| smc_sock freed
bh_lock_sock(&smc->sk) (panic) |
To make sure we won't receive any CDC messages after we free the
smc_sock, add a refcount on the smc_connection for inflight CDC
message(posted to the QP but haven't received related CQE), and
don't release the smc_connection until all the inflight CDC messages
haven been done, for both success or failed ones.
Using refcount on CDC messages brings another problem: when the link
is going to be destroyed, smcr_link_clear() will reset the QP, which
then remove all the pending CQEs related to the QP in the CQ. To make
sure all the CQEs will always come back so the refcount on the
smc_connection can always reach 0, smc_ib_modify_qp_reset() was replaced
by smc_ib_modify_qp_error().
And remove the timeout in smc_wr_tx_wait_no_pending_sends() since we
need to wait for all pending WQEs done, or we may encounter use-after-
free when handling CQEs.
For IB device removal routine, we need to wait for all the QPs on that
device been destroyed before we can destroy CQs on the device, or
the refcount on smc_connection won't reach 0 and smc_sock cannot be
released.
Fixes:
5f08318f617b ("smc: connection data control (CDC)")
Reported-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dust Li [Tue, 28 Dec 2021 09:03:24 +0000 (17:03 +0800)]
net/smc: don't send CDC/LLC message if link not ready
We found smc_llc_send_link_delete_all() sometimes wait
for 2s timeout when testing with RDMA link up/down.
It is possible when a smc_link is in ACTIVATING state,
the underlaying QP is still in RESET or RTR state, which
cannot send any messages out.
smc_llc_send_link_delete_all() use smc_link_usable() to
checks whether the link is usable, if the QP is still in
RESET or RTR state, but the smc_link is in ACTIVATING, this
LLC message will always fail without any CQE entering the
CQ, and we will always wait 2s before timeout.
Since we cannot send any messages through the QP before
the QP enter RTS. I add a wrapper smc_link_sendable()
which checks the state of QP along with the link state.
And replace smc_link_usable() with smc_link_sendable()
in all LLC & CDC message sending routine.
Fixes:
5f08318f617b ("smc: connection data control (CDC)")
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Tue, 28 Dec 2021 12:48:11 +0000 (12:48 +0000)]
NFC: st21nfca: Fix memory leak in device probe and remove
'phy->pending_skb' is alloced when device probe, but forgot to free
in the error handling path and remove path, this cause memory leak
as follows:
unreferenced object 0xffff88800bc06800 (size 512):
comm "8", pid 11775, jiffies
4295159829 (age 9.032s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
00000000d66c09ce>] __kmalloc_node_track_caller+0x1ed/0x450
[<
00000000c93382b3>] kmalloc_reserve+0x37/0xd0
[<
000000005fea522c>] __alloc_skb+0x124/0x380
[<
0000000019f29f9a>] st21nfca_hci_i2c_probe+0x170/0x8f2
Fix it by freeing 'pending_skb' in error and remove.
Fixes:
68957303f44a ("NFC: ST21NFCA: Add driver for STMicroelectronics ST21NFCA NFC Chip")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aleksander Jan Bajkowski [Mon, 27 Dec 2021 16:22:03 +0000 (17:22 +0100)]
net: lantiq_xrx200: fix statistics of received bytes
Received frames have FCS truncated. There is no need
to subtract FCS length from the statistics.
Fixes:
fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christophe JAILLET [Sun, 26 Dec 2021 17:51:44 +0000 (18:51 +0100)]
net: ag71xx: Fix a potential double free in error handling paths
'ndev' is a managed resource allocated with devm_alloc_etherdev(), so there
is no need to call free_netdev() explicitly or there will be a double
free().
Simplify all error handling paths accordingly.
Fixes:
d51b6ce441d3 ("net: ethernet: add ag71xx driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
wolfgang huang [Tue, 28 Dec 2021 08:01:20 +0000 (16:01 +0800)]
mISDN: change function names to avoid conflicts
As we build for mips, we meet following error. l1_init error with
multiple definition. Some architecture devices usually marked with
l1, l2, lxx as the start-up phase. so we change the mISDN function
names, align with Isdnl2_xxx.
mips-linux-gnu-ld: drivers/isdn/mISDN/layer1.o: in function `l1_init':
(.text+0x890): multiple definition of `l1_init'; \
arch/mips/kernel/bmips_5xxx_init.o:(.text+0xf0): first defined here
make[1]: *** [home/mips/kernel-build/linux/Makefile:1161: vmlinux] Error 1
Signed-off-by: wolfgang huang <huangjinhui@kylinos.cn>
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 27 Dec 2021 16:58:35 +0000 (08:58 -0800)]
Merge tag 'efi-urgent-for-v5.16-2' of git://git./linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
"Another EFI fix for v5.16:
- Prevent missing prototype warning from breaking the build under
CONFIG_WERROR=y"
* tag 'efi-urgent-for-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Move efifb_setup_from_dmi() prototype from arch headers
Tom Rix [Fri, 24 Dec 2021 15:07:39 +0000 (07:07 -0800)]
selinux: initialize proto variable in selinux_ip_postroute_compat()
Clang static analysis reports this warning
hooks.c:5765:6: warning: 4th function call argument is an uninitialized
value
if (selinux_xfrm_postroute_last(sksec->sid, skb, &ad, proto))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
selinux_parse_skb() can return ok without setting proto. The later call
to selinux_xfrm_postroute_last() does an early check of proto and can
return ok if the garbage proto value matches. So initialize proto.
Cc: stable@vger.kernel.org
Fixes:
eef9b41622f2 ("selinux: cleanup selinux_xfrm_sock_rcv_skb() and selinux_xfrm_postroute_last()")
Signed-off-by: Tom Rix <trix@redhat.com>
[PM: typo/spelling and checkpatch.pl description fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Krzysztof Kozlowski [Sun, 26 Dec 2021 12:03:47 +0000 (13:03 +0100)]
nfc: uapi: use kernel size_t to fix user-space builds
Fix user-space builds if it includes /usr/include/linux/nfc.h before
some of other headers:
/usr/include/linux/nfc.h:281:9: error: unknown type name ‘size_t’
281 | size_t service_name_len;
| ^~~~~~
Fixes:
d646960f7986 ("NFC: Initial LLCP support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry V. Levin [Sun, 26 Dec 2021 13:01:27 +0000 (16:01 +0300)]
uapi: fix linux/nfc.h userspace compilation errors
Replace sa_family_t with __kernel_sa_family_t to fix the following
linux/nfc.h userspace compilation errors:
/usr/include/linux/nfc.h:266:2: error: unknown type name 'sa_family_t'
sa_family_t sa_family;
/usr/include/linux/nfc.h:274:2: error: unknown type name 'sa_family_t'
sa_family_t sa_family;
Fixes:
23b7869c0fd0 ("NFC: add the NFC socket raw protocol")
Fixes:
d646960f7986 ("NFC: Initial LLCP support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthias-Christian Ott [Sun, 26 Dec 2021 22:12:08 +0000 (23:12 +0100)]
net: usb: pegasus: Do not drop long Ethernet frames
The D-Link DSB-650TX (2001:4002) is unable to receive Ethernet frames
that are longer than 1518 octets, for example, Ethernet frames that
contain 802.1Q VLAN tags.
The frames are sent to the pegasus driver via USB but the driver
discards them because they have the Long_pkt field set to 1 in the
received status report. The function read_bulk_callback of the pegasus
driver treats such received "packets" (in the terminology of the
hardware) as errors but the field simply does just indicate that the
Ethernet frame (MAC destination to FCS) is longer than 1518 octets.
It seems that in the 1990s there was a distinction between
"giant" (> 1518) and "runt" (< 64) frames and the hardware includes
flags to indicate this distinction. It seems that the purpose of the
distinction "giant" frames was to not allow infinitely long frames due
to transmission errors and to allow hardware to have an upper limit of
the frame size. However, the hardware already has such limit with its
2048 octet receive buffer and, therefore, Long_pkt is merely a
convention and should not be treated as a receive error.
Actually, the hardware is even able to receive Ethernet frames with 2048
octets which exceeds the claimed limit frame size limit of the driver of
1536 octets (PEGASUS_MTU).
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Matthias-Christian Ott <ott@mirix.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zekun Shen [Mon, 27 Dec 2021 02:32:45 +0000 (21:32 -0500)]
atlantic: Fix buff_ring OOB in aq_ring_rx_clean
The function obtain the next buffer without boundary check.
We should return with I/O error code.
The bug is found by fuzzing and the crash report is attached.
It is an OOB bug although reported as use-after-free.
[ 4.804724] BUG: KASAN: use-after-free in aq_ring_rx_clean+0x1e88/0x2730 [atlantic]
[ 4.805661] Read of size 4 at addr
ffff888034fe93a8 by task ksoftirqd/0/9
[ 4.806505]
[ 4.806703] CPU: 0 PID: 9 Comm: ksoftirqd/0 Tainted: G W 5.6.0 #34
[ 4.809030] Call Trace:
[ 4.809343] dump_stack+0x76/0xa0
[ 4.809755] print_address_description.constprop.0+0x16/0x200
[ 4.810455] ? aq_ring_rx_clean+0x1e88/0x2730 [atlantic]
[ 4.811234] ? aq_ring_rx_clean+0x1e88/0x2730 [atlantic]
[ 4.813183] __kasan_report.cold+0x37/0x7c
[ 4.813715] ? aq_ring_rx_clean+0x1e88/0x2730 [atlantic]
[ 4.814393] kasan_report+0xe/0x20
[ 4.814837] aq_ring_rx_clean+0x1e88/0x2730 [atlantic]
[ 4.815499] ? hw_atl_b0_hw_ring_rx_receive+0x9a5/0xb90 [atlantic]
[ 4.816290] aq_vec_poll+0x179/0x5d0 [atlantic]
[ 4.816870] ? _GLOBAL__sub_I_65535_1_aq_pci_func_init+0x20/0x20 [atlantic]
[ 4.817746] ? __next_timer_interrupt+0xba/0xf0
[ 4.818322] net_rx_action+0x363/0xbd0
[ 4.818803] ? call_timer_fn+0x240/0x240
[ 4.819302] ? __switch_to_asm+0x40/0x70
[ 4.819809] ? napi_busy_loop+0x520/0x520
[ 4.820324] __do_softirq+0x18c/0x634
[ 4.820797] ? takeover_tasklets+0x5f0/0x5f0
[ 4.821343] run_ksoftirqd+0x15/0x20
[ 4.821804] smpboot_thread_fn+0x2f1/0x6b0
[ 4.822331] ? smpboot_unregister_percpu_thread+0x160/0x160
[ 4.823041] ? __kthread_parkme+0x80/0x100
[ 4.823571] ? smpboot_unregister_percpu_thread+0x160/0x160
[ 4.824301] kthread+0x2b5/0x3b0
[ 4.824723] ? kthread_create_on_node+0xd0/0xd0
[ 4.825304] ret_from_fork+0x35/0x40
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
yangxingwu [Mon, 27 Dec 2021 08:29:51 +0000 (16:29 +0800)]
net: udp: fix alignment problem in udp4_seq_show()
$ cat /pro/net/udp
before:
sl local_address rem_address st tx_queue rx_queue tr tm->when
26050:
0100007F:0035
00000000:0000 07
00000000:
00000000 00:
00000000
26320:
0100007F:0143
00000000:0000 07
00000000:
00000000 00:
00000000
27135:
00000000:8472
00000000:0000 07
00000000:
00000000 00:
00000000
after:
sl local_address rem_address st tx_queue rx_queue tr tm->when
26050:
0100007F:0035
00000000:0000 07
00000000:
00000000 00:
00000000
26320:
0100007F:0143
00000000:0000 07
00000000:
00000000 00:
00000000
27135:
00000000:8472
00000000:0000 07
00000000:
00000000 00:
00000000
Signed-off-by: yangxingwu <xingwu.yang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Karsten Graul [Mon, 27 Dec 2021 13:35:30 +0000 (14:35 +0100)]
net/smc: fix using of uninitialized completions
In smc_wr_tx_send_wait() the completion on index specified by
pend->idx is initialized and after smc_wr_tx_send() was called the wait
for completion starts. pend->idx is used to get the correct index for
the wait, but the pend structure could already be cleared in
smc_wr_tx_process_cqe().
Introduce pnd_idx to hold and use a local copy of the correct index.
Fixes:
09c61d24f96d ("net/smc: wait for departure of an IB message")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
William Zhao [Thu, 23 Dec 2021 17:33:16 +0000 (12:33 -0500)]
ip6_vti: initialize __ip6_tnl_parm struct in vti6_siocdevprivate
The "__ip6_tnl_parm" struct was left uninitialized causing an invalid
load of random data when the "__ip6_tnl_parm" struct was used elsewhere.
As an example, in the function "ip6_tnl_xmit_ctl()", it tries to access
the "collect_md" member. With "__ip6_tnl_parm" being uninitialized and
containing random data, the UBSAN detected that "collect_md" held a
non-boolean value.
The UBSAN issue is as follows:
===============================================================
UBSAN: invalid-load in net/ipv6/ip6_tunnel.c:1025:14
load of value 30 is not a valid value for type '_Bool'
CPU: 1 PID: 228 Comm: kworker/1:3 Not tainted 5.16.0-rc4+ #8
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
Call Trace:
<TASK>
dump_stack_lvl+0x44/0x57
ubsan_epilogue+0x5/0x40
__ubsan_handle_load_invalid_value+0x66/0x70
? __cpuhp_setup_state+0x1d3/0x210
ip6_tnl_xmit_ctl.cold.52+0x2c/0x6f [ip6_tunnel]
vti6_tnl_xmit+0x79c/0x1e96 [ip6_vti]
? lock_is_held_type+0xd9/0x130
? vti6_rcv+0x100/0x100 [ip6_vti]
? lock_is_held_type+0xd9/0x130
? rcu_read_lock_bh_held+0xc0/0xc0
? lock_acquired+0x262/0xb10
dev_hard_start_xmit+0x1e6/0x820
__dev_queue_xmit+0x2079/0x3340
? mark_lock.part.52+0xf7/0x1050
? netdev_core_pick_tx+0x290/0x290
? kvm_clock_read+0x14/0x30
? kvm_sched_clock_read+0x5/0x10
? sched_clock_cpu+0x15/0x200
? find_held_lock+0x3a/0x1c0
? lock_release+0x42f/0xc90
? lock_downgrade+0x6b0/0x6b0
? mark_held_locks+0xb7/0x120
? neigh_connected_output+0x31f/0x470
? lockdep_hardirqs_on+0x79/0x100
? neigh_connected_output+0x31f/0x470
? ip6_finish_output2+0x9b0/0x1d90
? rcu_read_lock_bh_held+0x62/0xc0
? ip6_finish_output2+0x9b0/0x1d90
ip6_finish_output2+0x9b0/0x1d90
? ip6_append_data+0x330/0x330
? ip6_mtu+0x166/0x370
? __ip6_finish_output+0x1ad/0xfb0
? nf_hook_slow+0xa6/0x170
ip6_output+0x1fb/0x710
? nf_hook.constprop.32+0x317/0x430
? ip6_finish_output+0x180/0x180
? __ip6_finish_output+0xfb0/0xfb0
? lock_is_held_type+0xd9/0x130
ndisc_send_skb+0xb33/0x1590
? __sk_mem_raise_allocated+0x11cf/0x1560
? dst_output+0x4a0/0x4a0
? ndisc_send_rs+0x432/0x610
addrconf_dad_completed+0x30c/0xbb0
? addrconf_rs_timer+0x650/0x650
? addrconf_dad_work+0x73c/0x10e0
addrconf_dad_work+0x73c/0x10e0
? addrconf_dad_completed+0xbb0/0xbb0
? rcu_read_lock_sched_held+0xaf/0xe0
? rcu_read_lock_bh_held+0xc0/0xc0
process_one_work+0x97b/0x1740
? pwq_dec_nr_in_flight+0x270/0x270
worker_thread+0x87/0xbf0
? process_one_work+0x1740/0x1740
kthread+0x3ac/0x490
? set_kthread_struct+0x100/0x100
ret_from_fork+0x22/0x30
</TASK>
===============================================================
The solution is to initialize "__ip6_tnl_parm" struct to zeros in the
"vti6_siocdevprivate()" function.
Signed-off-by: William Zhao <wizhao@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 26 Dec 2021 21:17:17 +0000 (13:17 -0800)]
Linux 5.16-rc7
Linus Torvalds [Sun, 26 Dec 2021 18:28:55 +0000 (10:28 -0800)]
Merge tag 'x86_urgent_for_v5.16_rc7' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Prevent potential undefined behavior due to shifting pkey constants
into the sign bit
- Move the EFI memory reservation code *after* the efi= cmdline parsing
has happened
- Revert two commits which turned out to be the wrong direction to
chase when accommodating early memblock reservations consolidation
and command line parameters parsing
* tag 'x86_urgent_for_v5.16_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pkey: Fix undefined behaviour with PKRU_WD_BIT
x86/boot: Move EFI range reservation after cmdline parsing
Revert "x86/boot: Pull up cmdline preparation and early param parsing"
Revert "x86/boot: Mark prepare_command_line() __init"
Linus Torvalds [Sun, 26 Dec 2021 18:19:40 +0000 (10:19 -0800)]
Merge tag 'objtool_urgent_for_v5.16_rc7' of git://git./linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Prevent clang from reordering the reachable annotation in
an inline asm statement without inputs
- Fix objtool builds on non-glibc systems due to undefined
__always_inline
* tag 'objtool_urgent_for_v5.16_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
compiler.h: Fix annotation macro misplacement with Clang
uapi: Fix undefined __always_inline on non-glibc systems
Linus Torvalds [Sun, 26 Dec 2021 04:00:09 +0000 (20:00 -0800)]
Merge tag 'pinctrl-v5.16-3' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some hopefully final pin control fixes for the v5.16 kernel:
- Fix an out-of-bounds bug in the Mediatek driver
- Fix an init order bug in the Broadcom BCM2835 driver
- Fix a GPIO offset bug in the STM32 driver"
* tag 'pinctrl-v5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: stm32: consider the GPIO offset to expose all the GPIO lines
pinctrl: bcm2835: Change init order for gpio hogs
pinctrl: mediatek: fix global-out-of-bounds issue
Linus Torvalds [Sat, 25 Dec 2021 21:08:22 +0000 (13:08 -0800)]
Merge tag 'hwmon-for-v5.16-rc7' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"A couple of lm90 driver fixes. None of them are critical, but they
should nevertheless be fixed"
* tag 'hwmon-for-v5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (lm90) Do not report 'busy' status bit as alarm
hwmom: (lm90) Fix citical alarm status for MAX6680/MAX6681
hwmon: (lm90) Drop critical attribute support for MAX6654
hwmon: (lm90) Prevent integer overflow/underflow in hysteresis calculations
hwmon: (lm90) Fix usage of CONFIG2 register in detect function
Linus Torvalds [Sat, 25 Dec 2021 21:00:14 +0000 (13:00 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"A few small updates to drivers.
Of note we are now deferring probes of i8042 on some Asus devices as
the controller is not ready to respond to queries first time around
when the driver is compiled into the kernel"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elants_i2c - do not check Remark ID on eKTH3900/eKTH5312
Input: atmel_mxt_ts - fix double free in mxt_read_info_block
Input: goodix - fix memory leak in goodix_firmware_upload
Input: goodix - add id->model mapping for the "9111" model
Input: goodix - try not to touch the reset-pin on x86/ACPI devices
Input: i8042 - enable deferred probe quirk for ASUS UM325UA
Input: elantech - fix stack out of bound access in elantech_change_report_id()
Input: iqs626a - prohibit inlining of channel parsing functions
Input: i8042 - add deferred probe support
Linus Torvalds [Sat, 25 Dec 2021 20:30:03 +0000 (12:30 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"9 patches.
Subsystems affected by this patch series: mm (kfence, mempolicy,
memory-failure, pagemap, pagealloc, damon, and memory-failure),
core-kernel, and MAINTAINERS"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/hwpoison: clear MF_COUNT_INCREASED before retrying get_any_page()
mm/damon/dbgfs: protect targets destructions with kdamond_lock
mm/page_alloc: fix __alloc_size attribute for alloc_pages_exact_nid
mm: delete unsafe BUG from page_cache_add_speculative()
mm, hwpoison: fix condition in free hugetlb page path
MAINTAINERS: mark more list instances as moderated
kernel/crash_core: suppress unknown crashkernel parameter warning
mm: mempolicy: fix THP allocations escaping mempolicy restrictions
kfence: fix memory leak when cat kfence objects
Liu Shixin [Sat, 25 Dec 2021 05:12:58 +0000 (21:12 -0800)]
mm/hwpoison: clear MF_COUNT_INCREASED before retrying get_any_page()
Hulk Robot reported a panic in put_page_testzero() when testing
madvise() with MADV_SOFT_OFFLINE. The BUG() is triggered when retrying
get_any_page(). This is because we keep MF_COUNT_INCREASED flag in
second try but the refcnt is not increased.
page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0)
------------[ cut here ]------------
kernel BUG at include/linux/mm.h:737!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 5 PID: 2135 Comm: sshd Tainted: G B 5.16.0-rc6-dirty #373
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: release_pages+0x53f/0x840
Call Trace:
free_pages_and_swap_cache+0x64/0x80
tlb_flush_mmu+0x6f/0x220
unmap_page_range+0xe6c/0x12c0
unmap_single_vma+0x90/0x170
unmap_vmas+0xc4/0x180
exit_mmap+0xde/0x3a0
mmput+0xa3/0x250
do_exit+0x564/0x1470
do_group_exit+0x3b/0x100
__do_sys_exit_group+0x13/0x20
__x64_sys_exit_group+0x16/0x20
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Modules linked in:
---[ end trace
e99579b570fe0649 ]---
RIP: 0010:release_pages+0x53f/0x840
Link: https://lkml.kernel.org/r/20211221074908.3910286-1-liushixin2@huawei.com
Fixes:
b94e02822deb ("mm,hwpoison: try to narrow window race for free pages")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SeongJae Park [Sat, 25 Dec 2021 05:12:54 +0000 (21:12 -0800)]
mm/damon/dbgfs: protect targets destructions with kdamond_lock
DAMON debugfs interface iterates current monitoring targets in
'dbgfs_target_ids_read()' while holding the corresponding
'kdamond_lock'. However, it also destructs the monitoring targets in
'dbgfs_before_terminate()' without holding the lock. This can result in
a use_after_free bug. This commit avoids the race by protecting the
destruction with the corresponding 'kdamond_lock'.
Link: https://lkml.kernel.org/r/20211221094447.2241-1-sj@kernel.org
Reported-by: Sangwoo Bae <sangwoob@amazon.com>
Fixes:
4bc05954d007 ("mm/damon: implement a debugfs-based user space interface")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.15.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thibaut Sautereau [Sat, 25 Dec 2021 05:12:51 +0000 (21:12 -0800)]
mm/page_alloc: fix __alloc_size attribute for alloc_pages_exact_nid
The second parameter of alloc_pages_exact_nid is the one indicating the
size of memory pointed by the returned pointer.
Link: https://lkml.kernel.org/r/YbjEgwhn4bGblp//@coeus
Fixes:
abd58f38dfb4 ("mm/page_alloc: add __alloc_size attributes for better bounds checking")
Signed-off-by: Thibaut Sautereau <thibaut.sautereau@ssi.gouv.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Levente Polyak <levente@leventepolyak.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Sat, 25 Dec 2021 05:12:48 +0000 (21:12 -0800)]
mm: delete unsafe BUG from page_cache_add_speculative()
It is not easily reproducible, but on 5.16-rc I have several times hit
the VM_BUG_ON_PAGE(PageTail(page), page) in
page_cache_add_speculative(): usually from filemap_get_read_batch() for
an ext4 read, yesterday from next_uptodate_page() from
filemap_map_pages() for a shmem fault.
That BUG used to be placed where page_ref_add_unless() had succeeded,
but now it is placed before folio_ref_add_unless() is attempted: that is
not safe, since it is only the acquired reference which makes the page
safe from racing THP collapse or split.
We could keep the BUG, checking PageTail only when
folio_ref_try_add_rcu() has succeeded; but I don't think it adds much
value - just delete it.
Link: https://lkml.kernel.org/r/8b98fc6f-3439-8614-c3f3-945c659a1aba@google.com
Fixes:
020853b6f5ea ("mm: Add folio_try_get_rcu()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Naoya Horiguchi [Sat, 25 Dec 2021 05:12:45 +0000 (21:12 -0800)]
mm, hwpoison: fix condition in free hugetlb page path
When a memory error hits a tail page of a free hugepage,
__page_handle_poison() is expected to be called to isolate the error in
4kB unit, but it's not called due to the outdated if-condition in
memory_failure_hugetlb(). This loses the chance to isolate the error in
the finer unit, so it's not optimal. Drop the condition.
This "(p != head && TestSetPageHWPoison(head)" condition is based on the
old semantics of PageHWPoison on hugepage (where PG_hwpoison flag was
set on the subpage), so it's not necessray any more. By getting to set
PG_hwpoison on head page for hugepages, concurrent error events on
different subpages in a single hugepage can be prevented by
TestSetPageHWPoison(head) at the beginning of memory_failure_hugetlb().
So dropping the condition should not reopen the race window originally
mentioned in commit
b985194c8c0a ("hwpoison, hugetlb:
lock_page/unlock_page does not match for handling a free hugepage")
[naoya.horiguchi@linux.dev: fix "HardwareCorrupted" counter]
Link: https://lkml.kernel.org/r/20211220084851.GA1460264@u2004
Link: https://lkml.kernel.org/r/20211210110208.879740-1-naoya.horiguchi@linux.dev
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: Fei Luo <luofei@unicloud.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org> [5.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Sat, 25 Dec 2021 05:12:42 +0000 (21:12 -0800)]
MAINTAINERS: mark more list instances as moderated
Some lists that are moderated are not marked as moderated consistently,
so mark them all as moderated.
Link: https://lkml.kernel.org/r/20211209001330.18558-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Conor Culhane <conor.culhane@silvaco.com>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Jianjun Wang <jianjun.wang@mediatek.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Philipp Rudo [Sat, 25 Dec 2021 05:12:39 +0000 (21:12 -0800)]
kernel/crash_core: suppress unknown crashkernel parameter warning
When booting with crashkernel= on the kernel command line a warning
similar to
Kernel command line: ro console=ttyS0 crashkernel=256M
Unknown kernel command line parameters "crashkernel=256M", will be passed to user space.
is printed.
This comes from crashkernel= being parsed independent from the kernel
parameter handling mechanism. So the code in init/main.c doesn't know
that crashkernel= is a valid kernel parameter and prints this incorrect
warning.
Suppress the warning by adding a dummy early_param handler for
crashkernel=.
Link: https://lkml.kernel.org/r/20211208133443.6867-1-prudo@redhat.com
Fixes:
86d1919a4fb0 ("init: print out unknown kernel parameters")
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Ryabinin [Sat, 25 Dec 2021 05:12:35 +0000 (21:12 -0800)]
mm: mempolicy: fix THP allocations escaping mempolicy restrictions
alloc_pages_vma() may try to allocate THP page on the local NUMA node
first:
page = __alloc_pages_node(hpage_node,
gfp | __GFP_THISNODE | __GFP_NORETRY, order);
And if the allocation fails it retries allowing remote memory:
if (!page && (gfp & __GFP_DIRECT_RECLAIM))
page = __alloc_pages_node(hpage_node,
gfp, order);
However, this retry allocation completely ignores memory policy nodemask
allowing allocation to escape restrictions.
The first appearance of this bug seems to be the commit
ac5b2c18911f
("mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings").
The bug disappeared later in the commit
89c83fb539f9 ("mm, thp:
consolidate THP gfp handling into alloc_hugepage_direct_gfpmask") and
reappeared again in slightly different form in the commit
76e654cc91bb
("mm, page_alloc: allow hugepage fallback to remote nodes when
madvised")
Fix this by passing correct nodemask to the __alloc_pages() call.
The demonstration/reproducer of the problem:
$ mount -oremount,size=4G,huge=always /dev/shm/
$ echo always > /sys/kernel/mm/transparent_hugepage/defrag
$ cat mbind_thp.c
#include <unistd.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <assert.h>
#include <stdlib.h>
#include <stdio.h>
#include <numaif.h>
#define SIZE 2ULL << 30
int main(int argc, char **argv)
{
int fd;
unsigned long long i;
char *addr;
pid_t pid;
char buf[100];
unsigned long nodemask = 1;
fd = open("/dev/shm/test", O_RDWR|O_CREAT);
assert(fd > 0);
assert(ftruncate(fd, SIZE) == 0);
addr = mmap(NULL, SIZE, PROT_READ|PROT_WRITE,
MAP_SHARED, fd, 0);
assert(mbind(addr, SIZE, MPOL_BIND, &nodemask, 2, MPOL_MF_STRICT|MPOL_MF_MOVE)==0);
for (i = 0; i < SIZE; i+=4096) {
addr[i] = 1;
}
pid = getpid();
snprintf(buf, sizeof(buf), "grep shm /proc/%d/numa_maps", pid);
system(buf);
sleep(10000);
return 0;
}
$ gcc mbind_thp.c -o mbind_thp -lnuma
$ numactl -H
available: 2 nodes (0-1)
node 0 cpus: 0 2
node 0 size: 1918 MB
node 0 free: 1595 MB
node 1 cpus: 1 3
node 1 size: 2014 MB
node 1 free: 1731 MB
node distances:
node 0 1
0: 10 20
1: 20 10
$ rm -f /dev/shm/test; taskset -c 0 ./mbind_thp
7fd970a00000 bind:0 file=/dev/shm/test dirty=524288 active=0 N0=396800 N1=127488 kernelpagesize_kB=4
Link: https://lkml.kernel.org/r/20211208165343.22349-1-arbn@yandex-team.com
Fixes:
ac5b2c18911f ("mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings")
Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Baokun Li [Sat, 25 Dec 2021 05:12:32 +0000 (21:12 -0800)]
kfence: fix memory leak when cat kfence objects
Hulk robot reported a kmemleak problem:
unreferenced object 0xffff93d1d8cc02e8 (size 248):
comm "cat", pid 23327, jiffies
4624670141 (age 495992.217s)
hex dump (first 32 bytes):
00 40 85 19 d4 93 ff ff 00 10 00 00 00 00 00 00 .@..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
seq_open+0x2a/0x80
full_proxy_open+0x167/0x1e0
do_dentry_open+0x1e1/0x3a0
path_openat+0x961/0xa20
do_filp_open+0xae/0x120
do_sys_openat2+0x216/0x2f0
do_sys_open+0x57/0x80
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
unreferenced object 0xffff93d419854000 (size 4096):
comm "cat", pid 23327, jiffies
4624670141 (age 495992.217s)
hex dump (first 32 bytes):
6b 66 65 6e 63 65 2d 23 32 35 30 3a 20 30 78 30 kfence-#250: 0x0
30 30 30 30 30 30 30 37 35 34 62 64 61 31 32 2d
0000000754bda12-
backtrace:
seq_read_iter+0x313/0x440
seq_read+0x14b/0x1a0
full_proxy_read+0x56/0x80
vfs_read+0xa5/0x1b0
ksys_read+0xa0/0xf0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
I find that we can easily reproduce this problem with the following
commands:
cat /sys/kernel/debug/kfence/objects
echo scan > /sys/kernel/debug/kmemleak
cat /sys/kernel/debug/kmemleak
The leaked memory is allocated in the stack below:
do_syscall_64
do_sys_open
do_dentry_open
full_proxy_open
seq_open ---> alloc seq_file
vfs_read
full_proxy_read
seq_read
seq_read_iter
traverse ---> alloc seq_buf
And it should have been released in the following process:
do_syscall_64
syscall_exit_to_user_mode
exit_to_user_mode_prepare
task_work_run
____fput
__fput
full_proxy_release ---> free here
However, the release function corresponding to file_operations is not
implemented in kfence. As a result, a memory leak occurs. Therefore,
the solution to this problem is to implement the corresponding release
function.
Link: https://lkml.kernel.org/r/20211206133628.2822545-1-libaokun1@huawei.com
Fixes:
0ce20dd84089 ("mm: add Kernel Electric-Fence infrastructure")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ma Xinjian [Fri, 24 Dec 2021 09:59:28 +0000 (17:59 +0800)]
selftests: mptcp: Remove the deprecated config NFT_COUNTER
NFT_COUNTER was removed since
390ad4295aa ("netfilter: nf_tables: make counter support built-in")
LKP/0Day will check if all configs listing under selftests are able to
be enabled properly.
For the missing configs, it will report something like:
LKP WARN miss config CONFIG_NFT_COUNTER= of net/mptcp/config
- it's not reasonable to keep the deprecated configs.
- configs under kselftests are recommended by corresponding tests.
So if some configs are missing, it will impact the testing results
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ma Xinjian <xinjianx.ma@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Thu, 23 Dec 2021 18:04:30 +0000 (13:04 -0500)]
sctp: use call_rcu to free endpoint
This patch is to delay the endpoint free by calling call_rcu() to fix
another use-after-free issue in sctp_sock_dump():
BUG: KASAN: use-after-free in __lock_acquire+0x36d9/0x4c20
Call Trace:
__lock_acquire+0x36d9/0x4c20 kernel/locking/lockdep.c:3218
lock_acquire+0x1ed/0x520 kernel/locking/lockdep.c:3844
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline]
_raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168
spin_lock_bh include/linux/spinlock.h:334 [inline]
__lock_sock+0x203/0x350 net/core/sock.c:2253
lock_sock_nested+0xfe/0x120 net/core/sock.c:2774
lock_sock include/net/sock.h:1492 [inline]
sctp_sock_dump+0x122/0xb20 net/sctp/diag.c:324
sctp_for_each_transport+0x2b5/0x370 net/sctp/socket.c:5091
sctp_diag_dump+0x3ac/0x660 net/sctp/diag.c:527
__inet_diag_dump+0xa8/0x140 net/ipv4/inet_diag.c:1049
inet_diag_dump+0x9b/0x110 net/ipv4/inet_diag.c:1065
netlink_dump+0x606/0x1080 net/netlink/af_netlink.c:2244
__netlink_dump_start+0x59a/0x7c0 net/netlink/af_netlink.c:2352
netlink_dump_start include/linux/netlink.h:216 [inline]
inet_diag_handler_cmd+0x2ce/0x3f0 net/ipv4/inet_diag.c:1170
__sock_diag_cmd net/core/sock_diag.c:232 [inline]
sock_diag_rcv_msg+0x31d/0x410 net/core/sock_diag.c:263
netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2477
sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:274
This issue occurs when asoc is peeled off and the old sk is freed after
getting it by asoc->base.sk and before calling lock_sock(sk).
To prevent the sk free, as a holder of the sk, ep should be alive when
calling lock_sock(). This patch uses call_rcu() and moves sock_put and
ep free into sctp_endpoint_destroy_rcu(), so that it's safe to try to
hold the ep under rcu_read_lock in sctp_transport_traverse_process().
If sctp_endpoint_hold() returns true, it means this ep is still alive
and we have held it and can continue to dump it; If it returns false,
it means this ep is dead and can be freed after rcu_read_unlock, and
we should skip it.
In sctp_sock_dump(), after locking the sk, if this ep is different from
tsp->asoc->ep, it means during this dumping, this asoc was peeled off
before calling lock_sock(), and the sk should be skipped; If this ep is
the same with tsp->asoc->ep, it means no peeloff happens on this asoc,
and due to lock_sock, no peeloff will happen either until release_sock.
Note that delaying endpoint free won't delay the port release, as the
port release happens in sctp_endpoint_destroy() before calling call_rcu().
Also, freeing endpoint by call_rcu() makes it safe to access the sk by
asoc->base.sk in sctp_assocs_seq_show() and sctp_rcv().
Thanks Jones to bring this issue up.
v1->v2:
- improve the changelog.
- add kfree(ep) into sctp_endpoint_destroy_rcu(), as Jakub noticed.
Reported-by: syzbot+9276d76e83e3bcde6c99@syzkaller.appspotmail.com
Reported-by: Lee Jones <lee.jones@linaro.org>
Fixes:
d25adbeb0cdb ("sctp: fix an use-after-free issue in sctp_sock_dump")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Miaoqian Lin [Fri, 24 Dec 2021 02:14:59 +0000 (02:14 +0000)]
net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register
The fixed_phy_get_gpiod function() returns NULL, it doesn't return error
pointers, using NULL checking to fix this.i
Fixes:
5468e82f7034 ("net: phy: fixed-phy: Drop GPIO from fixed_phy_add()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20211224021500.10362-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 24 Dec 2021 17:02:24 +0000 (09:02 -0800)]
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
- fix nommu after getting rid of mini-stack for ARMv7
- fix Thumb2 bug in iWMMXt exception handling
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9169/1: entry: fix Thumb2 bug in iWMMXt exception handling
ARM: 9160/1: NOMMU: Reload __secondary_data after PROCINFO_INITFUNC
Linus Torvalds [Fri, 24 Dec 2021 16:58:23 +0000 (08:58 -0800)]
Merge tag 'platform-drivers-x86-v5.16-4' of git://git./linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Various bug-fixes"
* tag 'platform-drivers-x86-v5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: intel_pmc_core: fix memleak on registration failure
platform/x86/intel: Remove X86_PLATFORM_DRIVERS_INTEL
platform/x86: system76_acpi: Guard System76 EC specific functionality
platform/x86: apple-gmux: use resource_size() with res
platform/x86: amd-pmc: only use callbacks for suspend
platform/mellanox: mlxbf-pmc: Fix an IS_ERR() vs NULL bug in mlxbf_pmc_map_counters
Heiko Carstens [Thu, 23 Dec 2021 16:43:14 +0000 (17:43 +0100)]
recordmcount.pl: fix typo in s390 mcount regex
Commit
85bf17b28f97 ("recordmcount.pl: look for jgnop instruction as well
as bcrl on s390") added a new alternative mnemonic for the existing brcl
instruction. This is required for the combination old gcc version (pre 9.0)
and binutils since version 2.37.
However at the same time this commit introduced a typo, replacing brcl with
bcrl. As a result no mcount locations are detected anymore with old gcc
versions (pre 9.0) and binutils before version 2.37.
Fix this by using the correct mnemonic again.
Reported-by: Miroslav Benes <mbenes@suse.cz>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: <stable@vger.kernel.org>
Fixes:
85bf17b28f97 ("recordmcount.pl: look for jgnop instruction as well as bcrl on s390")
Link: https://lore.kernel.org/r/alpine.LSU.2.21.2112230949520.19849@pobox.suse.cz
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Coco Li [Thu, 23 Dec 2021 22:24:41 +0000 (22:24 +0000)]
selftests: Calculate udpgso segment count without header adjustment
The below referenced commit correctly updated the computation of number
of segments (gso_size) by using only the gso payload size and
removing the header lengths.
With this change the regression test started failing. Update
the tests to match this new behavior.
Both IPv4 and IPv6 tests are updated, as a separate patch in this series
will update udp_v6_send_skb to match this change in udp_send_skb.
Fixes:
158390e45612 ("udp: using datalen to cap max gso segments")
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211223222441.2975883-2-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Coco Li [Thu, 23 Dec 2021 22:24:40 +0000 (22:24 +0000)]
udp: using datalen to cap ipv6 udp max gso segments
The max number of UDP gso segments is intended to cap to
UDP_MAX_SEGMENTS, this is checked in udp_send_skb().
skb->len contains network and transport header len here, we should use
only data len instead.
This is the ipv6 counterpart to the below referenced commit,
which missed the ipv6 change
Fixes:
158390e45612 ("udp: using datalen to cap max gso segments")
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211223222441.2975883-1-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 24 Dec 2021 03:04:32 +0000 (19:04 -0800)]
Merge tag 'mlx5-fixes-2021-12-22' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2021-12-22
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2021-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'
net/mlx5e: Delete forward rule for ct or sample action
net/mlx5e: Fix ICOSQ recovery flow for XSK
net/mlx5e: Fix interoperability between XSK and ICOSQ recovery flow
net/mlx5e: Fix skb memory leak when TC classifier action offloads are disabled
net/mlx5e: Wrap the tx reporter dump callback to extract the sq
net/mlx5: Fix tc max supported prio for nic mode
net/mlx5: Fix SF health recovery flow
net/mlx5: Fix error print in case of IRQ request failed
net/mlx5: Use first online CPU instead of hard coded CPU
net/mlx5: DR, Fix querying eswitch manager vport for ECPF
net/mlx5: DR, Fix NULL vs IS_ERR checking in dr_domain_init_resources
====================
Link: https://lore.kernel.org/r/20211223190441.153012-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 24 Dec 2021 01:15:23 +0000 (17:15 -0800)]
Merge tag '5.16-rc5-ksmbd-fixes' of git://git.samba.org/ksmbd
Pull ksmbd fixes from Steve French:
"Three ksmbd fixes, all for stable as well.
Two fix potential unitialized memory and one fixes a security problem
where encryption is unitentionally disabled from some clients"
* tag '5.16-rc5-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: disable SMB2_GLOBAL_CAP_ENCRYPTION for SMB 3.1.1
ksmbd: fix uninitialized symbol 'pntsd_size'
ksmbd: fix error code in ndr_read_int32()
Linus Torvalds [Thu, 23 Dec 2021 23:43:25 +0000 (15:43 -0800)]
Merge tag 'drm-fixes-2021-12-24' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Happy Xmas. Nothing major, one mediatek and a couple of i915 locking
fixes. There might be a few stragglers over next week or so but I
don't expect much before next release.
mediatek:
- NULL pointer check
i915:
- guc submission locking fixes"
* tag 'drm-fixes-2021-12-24' of git://anongit.freedesktop.org/drm/drm:
drm/i915/guc: Only assign guc_id.id when stealing guc_id
drm/i915/guc: Use correct context lock when callig clr_context_registered
drm/mediatek: hdmi: Perform NULL pointer check for mtk_hdmi_conf
Linus Torvalds [Thu, 23 Dec 2021 23:32:07 +0000 (15:32 -0800)]
Merge tag 'io_uring-5.16-2021-12-23' of git://git.kernel.dk/linux-block
Pull io_uring fix from Jens Axboe:
"Single fix for not clearing kiocb->ki_pos back to 0 for a stream,
destined for stable as well"
* tag 'io_uring-5.16-2021-12-23' of git://git.kernel.dk/linux-block:
io_uring: zero iocb->ki_pos for stream file types
Linus Torvalds [Thu, 23 Dec 2021 23:27:02 +0000 (15:27 -0800)]
Merge branch 'ucount-rlimit-fixes-for-v5.16' of git://git./linux/kernel/git/ebiederm/user-namespace
Pull ucount fix from Eric Biederman:
"This fixes a silly logic bug in the ucount rlimits code, where it was
comparing against the wrong limit"
* 'ucount-rlimit-fixes-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ucounts: Fix rlimit max values check
Linus Torvalds [Thu, 23 Dec 2021 18:45:55 +0000 (10:45 -0800)]
Merge tag 'net-5.16-rc7' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- revert "tipc: use consistent GFP flags"
Previous releases - regressions:
- igb: fix deadlock caused by taking RTNL in runtime resume path
- accept UFOv6 packages in virtio_net_hdr_to_skb
- netfilter: fix regression in looped (broad|multi)cast's MAC
handling
- bridge: fix ioctl old_deviceless bridge argument
- ice: xsk: do not clear status_error0 for ntu + nb_buffs descriptor,
avoid stalls when multiple sockets use an interface
Previous releases - always broken:
- inet: fully convert sk->sk_rx_dst to RCU rules
- veth: ensure skb entering GRO are not cloned
- sched: fix zone matching for invalid conntrack state
- bonding: fix ad_actor_system option setting to default
- nf_tables: fix use-after-free in nft_set_catchall_destroy()
- lantiq_xrx200: increase buffer reservation to avoid mem corruption
- ice: xsk: avoid leaking app buffers during clean up
- tun: avoid double free in tun_free_netdev"
* tag 'net-5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
net: stmmac: dwmac-visconti: Fix value of ETHER_CLK_SEL_FREQ_SEL_2P5M
r8152: sync ocp base
r8152: fix the force speed doesn't work for RTL8156
net: bridge: fix ioctl old_deviceless bridge argument
net: stmmac: ptp: fix potentially overflowing expression
net: dsa: tag_ocelot: use traffic class to map priority on injected header
veth: ensure skb entering GRO are not cloned.
asix: fix wrong return value in asix_check_host_enable()
asix: fix uninit-value in asix_mdio_read()
sfc: falcon: Check null pointer of rx_queue->page_ring
sfc: Check null pointer of rx_queue->page_ring
net: ks8851: Check for error irq
drivers: net: smc911x: Check for error irq
fjes: Check for error irq
bonding: fix ad_actor_system option setting to default
igb: fix deadlock caused by taking RTNL in RPM resume path
gve: Correct order of processing device options
net: skip virtio_net_hdr_set_proto if protocol already set
net: accept UFOv6 packages in virtio_net_hdr_to_skb
docs: networking: replace skb_hwtstamp_tx with skb_tstamp_tx
...
Johan Hovold [Wed, 22 Dec 2021 10:50:23 +0000 (11:50 +0100)]
platform/x86: intel_pmc_core: fix memleak on registration failure
In case device registration fails during module initialisation, the
platform device structure needs to be freed using platform_device_put()
to properly free all resources (e.g. the device name).
Fixes:
938835aa903a ("platform/x86: intel_pmc_core: do not create a static struct device")
Cc: stable@vger.kernel.org # 5.9
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211222105023.6205-1-johan@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Nobuhiro Iwamatsu [Thu, 23 Dec 2021 07:36:33 +0000 (16:36 +0900)]
net: stmmac: dwmac-visconti: Fix value of ETHER_CLK_SEL_FREQ_SEL_2P5M
ETHER_CLK_SEL_FREQ_SEL_2P5M is not 0 bit of the register. This is a
value, which is 0. Fix from BIT(0) to 0.
Reported-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Fixes:
b38dd98ff8d0 ("net: stmmac: Add Toshiba Visconti SoCs glue driver")
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Link: https://lore.kernel.org/r/20211223073633.101306-1-nobuhiro1.iwamatsu@toshiba.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 23 Dec 2021 17:56:08 +0000 (09:56 -0800)]
Merge branch 'r8152-fix-bugs'
Hayes Wang says:
====================
r8152: fix bugs
Patch #1 fix the issue of force speed mode for RTL8156.
Patch #2 fix the issue of unexpected ocp_base.
====================
Link: https://lore.kernel.org/r/20211223092702.23841-386-nic_swsd@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hayes Wang [Thu, 23 Dec 2021 09:27:02 +0000 (17:27 +0800)]
r8152: sync ocp base
There are some chances that the actual base of hardware is different
from the value recorded by driver, so we have to reset the variable
of ocp_base to sync it.
Set ocp_base to -1. Then, it would be updated and the new base would be
set to the hardware next time.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hayes Wang [Thu, 23 Dec 2021 09:27:01 +0000 (17:27 +0800)]
r8152: fix the force speed doesn't work for RTL8156
It needs to set mdio force mode. Otherwise, link off always occurs when
setting force speed.
Fixes:
195aae321c82 ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>