OSDN Git Service
Daniel P. Berrange [Mon, 23 Nov 2015 15:29:59 +0000 (15:29 +0000)]
qemu-char: convert to use error checked base64 decode
Switch from using g_base64_decode over to qbase64_decode
in order to get error checking of the base64 input data.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrange [Mon, 23 Nov 2015 15:24:50 +0000 (15:24 +0000)]
util: add base64 decoding function
The standard glib provided g_base64_decode doesn't provide any
kind of sensible error checking on its input. Add a QEMU custom
wrapper qbase64_decode which can be used with untrustworthy
input that can contain invalid base64 characters, embedded
NUL characters, or not be NUL terminated at all.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Peter Maydell [Mon, 14 Dec 2015 15:02:36 +0000 (15:02 +0000)]
configure: Fix shell syntax to placate OpenBSD's pdksh
Unfortunately the OpenBSD pdksh does not like brackets inside
the right part of a ${variable+word} parameter expansion:
$ echo "${a+($b)}"
ksh: ${a+($b)}": bad substitution
though both bash and dash accept them. In any case this line
was causing odd output in the case where nettle is not present:
nettle no ()
(because if nettle is not present then $nettle will be "no",
not a null string or unset).
Rewrite it to just use an if.
This bug was originally introduced in
becaeb726 and was present
in the 2.4.0 release.
Fixes: https://bugs.launchpad.net/qemu/+bug/
1525682
Reported-by: Dmitrij D. Czarkoff
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
1450105357-8516-1-git-send-email-peter.maydell@linaro.org
Peter Maydell [Fri, 18 Dec 2015 12:42:10 +0000 (12:42 +0000)]
Merge remote-tracking branch 'remotes/berrange/tags/pull-io-channel-base-2015-12-18-1' into staging
Merge I/O channels base classes
# gpg: Signature made Fri 18 Dec 2015 12:18:38 GMT using RSA key ID
15104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
* remotes/berrange/tags/pull-io-channel-base-2015-12-18-1:
io: add QIOChannelBuffer class
io: add QIOChannelCommand class
io: add QIOChannelWebsock class
io: add QIOChannelTLS class
io: add QIOChannelFile class
io: add QIOChannelSocket class
io: add QIOTask class for async operations
io: add helper module for creating watches on FDs
io: add abstract QIOChannel classes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Daniel P. Berrange [Tue, 15 Sep 2015 16:27:33 +0000 (17:27 +0100)]
io: add QIOChannelBuffer class
Add a QIOChannel subclass that is capable of performing I/O
to/from a memory buffer. This implementation does not attempt
to support concurrent readers & writers. It is designed for
serialized access where by a single thread at a time may write
data, seek and then read data back out.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrange [Thu, 27 Aug 2015 15:25:30 +0000 (16:25 +0100)]
io: add QIOChannelCommand class
Add a QIOChannel subclass that is capable of performing I/O
to/from a separate process, via a pair of pipes. The command
can be used for unidirectional or bi-directional I/O.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrange [Wed, 4 Mar 2015 15:57:41 +0000 (15:57 +0000)]
io: add QIOChannelWebsock class
Add a QIOChannel subclass that can run the websocket protocol over
the top of another QIOChannel instance. This initial implementation
is only capable of acting as a websockets server. There is no support
for acting as a websockets client yet.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrange [Mon, 2 Mar 2015 18:13:13 +0000 (18:13 +0000)]
io: add QIOChannelTLS class
Add a QIOChannel subclass that can run the TLS protocol over
the top of another QIOChannel instance. The object provides a
simplified API to perform the handshake when starting the TLS
session. The layering of TLS over the underlying channel does
not have to be setup immediately. It is possible to take an
existing QIOChannel that has done some handshake and then swap
in the QIOChannelTLS layer. This allows for use with protocols
which start TLS right away, and those which start plain text
and then negotiate TLS.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrange [Fri, 27 Feb 2015 18:25:25 +0000 (18:25 +0000)]
io: add QIOChannelFile class
Add a QIOChannel subclass that is capable of operating on things
that are files, such as plain files, pipes, character/block
devices, but notably not sockets.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrange [Fri, 27 Feb 2015 16:19:33 +0000 (16:19 +0000)]
io: add QIOChannelSocket class
Implement a QIOChannel subclass that supports sockets I/O.
The implementation is able to manage a single socket file
descriptor, whether a TCP/UNIX listener, TCP/UNIX connection,
or a UDP datagram. It provides APIs which can listen and
connect either asynchronously or synchronously. Since there
is no asynchronous DNS lookup API available, it uses the
QIOTask helper for spawning a background thread to ensure
non-blocking operation.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrange [Wed, 18 Mar 2015 17:25:45 +0000 (17:25 +0000)]
io: add QIOTask class for async operations
A number of I/O operations need to be performed asynchronously
to avoid blocking the main loop. The caller of such APIs need
to provide a callback to be invoked on completion/error and
need access to the error, if any. The small QIOTask provides
a simple framework for dealing with such probes. The API
docs inline provide an outline of how this is to be used.
Some functions don't have the ability to run asynchronously
(eg getaddrinfo always blocks), so to facilitate their use,
the task class provides a mechanism to run a blocking
function in a thread, while triggering the completion
callback in the main event loop thread. This easily allows
any synchronous function to be made asynchronous, albeit
at the cost of spawning a thread.
In this series, the QIOTask class will be used for things like
the TLS handshake, the websockets handshake and TCP connect()
progress.
The concept of QIOTask is inspired by the GAsyncResult
interface / GTask class in the GIO libraries. The min
version requirements on glib don't allow those to be
used from QEMU, so QIOTask provides a facsimilie which
can be easily switched to GTask in the future if the
min version is increased.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrange [Tue, 3 Mar 2015 12:59:16 +0000 (12:59 +0000)]
io: add helper module for creating watches on FDs
A number of the channel implementations will require the
ability to create watches on file descriptors / sockets.
To avoid duplicating this code in each channel, provide a
helper API for dealing with file descriptor watches.
There are two watch implementations provided. The first
is useful for bi-directional file descriptors such as
sockets, regular files, character devices, etc. The
second works with a pair of unidirectional file descriptors
such as pipes.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrange [Fri, 27 Feb 2015 16:19:33 +0000 (16:19 +0000)]
io: add abstract QIOChannel classes
Start the new generic I/O channel framework by defining a
QIOChannel abstract base class. This is designed to feel
similar to GLib's GIOChannel, but with the addition of
support for using iovecs, qemu error reporting, file
descriptor passing, coroutine integration and use of
the QOM framework for easier sub-classing.
The intention is that anywhere in QEMU that almost
anywhere that deals with sockets will use this new I/O
infrastructure, so that it becomes trivial to then layer
in support for TLS encryption. This will at least include
the VNC server, char device backend and migration code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Peter Maydell [Thu, 17 Dec 2015 18:07:09 +0000 (18:07 +0000)]
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* KVM: synic support, split irqchip support
* memory: cleanups, optimizations, ioeventfd emulation
* SCSI: small fixes, vmw_pvscsi compatibility improvements
* qemu_log cleanups
* Coverity model improvements
# gpg: Signature made Thu 17 Dec 2015 16:35:21 GMT using RSA key ID
78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (45 commits)
coverity: Model g_memdup()
coverity: Model g_poll()
scsi: always call notifier on async cancellation
scsi: use scsi_req_cancel_async when purging requests
target-i386: kvm: clear unusable segments' flags in migration
rcu: optimize rcu_read_lock
memory: try to inline constant-length reads
memory: inline a few small accessors
memory: extract first iteration of address_space_read and address_space_write
memory: split address_space_read and address_space_write
memory: avoid unnecessary object_ref/unref
memory: reorder MemoryRegion fields
exec: make qemu_ram_ptr_length more similar to qemu_get_ram_ptr
exec: always call qemu_get_ram_ptr within rcu_read_lock
linux-user: convert DEBUG_SIGNAL logging to tracepoints
linux-user: avoid "naked" qemu_log
user: introduce "-d page"
xtensa: avoid "naked" qemu_log
tricore: avoid "naked" qemu_log
ppc: cleanup logging
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Markus Armbruster [Mon, 30 Nov 2015 16:32:32 +0000 (17:32 +0100)]
coverity: Model g_memdup()
We model all the non-deprecated memory allocation functions from
https://developer.gnome.org/glib/stable/glib-Memory-Allocation.html
except for g_memdup(), g_clear_pointer(), g_steal_pointer(). We don't
use the latter two. Model the former.
Coverity now reports an OVERRUN
vl.c:2317: alloc_strlen: Allocating insufficient memory for the terminating null of the string.
Correct, but we omit the terminating null intentionally there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
1448901152-11716-1-git-send-email-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Markus Armbruster [Thu, 17 Dec 2015 07:20:33 +0000 (08:20 +0100)]
coverity: Model g_poll()
In my testing, Coverity reported two more CHECKED_RETURN:
* qemu-char.c:1248: fixed in commit
c1f2448: "qemu-char: retry g_poll
on EINTR".
* migration/qemu-file-unix.c:75: harmless, cleaned up in commit
4e39f57 "migration: Clean up use of g_poll() in
socket_writev_buffer()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
1450336833-27710-1-git-send-email-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 16 Dec 2015 18:33:44 +0000 (19:33 +0100)]
scsi: always call notifier on async cancellation
This was found by code inspection. If the request is cancelled twice,
the notifier is never called on the second cancellation request,
and hence for example a TMF might never finish.
All the calls in scsi_req_cancel_async are idempotent, so the change
is safe.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
1450290827-30508-2-git-send-email-pbonzini@redhat.com>
Paolo Bonzini [Wed, 16 Dec 2015 18:33:43 +0000 (19:33 +0100)]
scsi: use scsi_req_cancel_async when purging requests
This avoids calls to aio_poll without having acquired the context first.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
1450290827-30508-1-git-send-email-pbonzini@redhat.com>
Michael Chapman [Mon, 7 Dec 2015 04:54:07 +0000 (15:54 +1100)]
target-i386: kvm: clear unusable segments' flags in migration
This commit fixes migration of a QEMU/KVM guest from kernel >= v3.9 to
kernel <= v3.7 (e.g. from RHEL 7 to RHEL 6). Without this commit a guest
migrated across these kernel versions fails to resume on the target host
as its segment descriptors are invalid.
Two separate kernel commits combined together to result in this bug:
commit
f0495f9b9992f80f82b14306946444b287193390
Author: Avi Kivity <avi@redhat.com>
Date: Thu Jun 7 17:06:10 2012 +0300
KVM: VMX: Relax check on unusable segment
Some userspace (e.g. QEMU 1.1) munge the d and g bits of segment
descriptors, causing us not to recognize them as unusable segments
with emulate_invalid_guest_state=1. Relax the check by testing for
segment not present (a non-present segment cannot be usable).
Signed-off-by: Avi Kivity <avi@redhat.com>
commit
25391454e73e3156202264eb3c473825afe4bc94
Author: Gleb Natapov <gleb@redhat.com>
Date: Mon Jan 21 15:36:46 2013 +0200
KVM: VMX: don't clobber segment AR of unusable segments.
Usability is returned in unusable field, so not need to clobber entire
AR. Callers have to know how to deal with unusable segments already
since if emulate_invalid_guest_state=true AR is not zeroed.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The first commit changed the KVM_SET_SREGS ioctl so that it did no treat
segment flags == 0 as an unusable segment, instead only looking at the
"present" flag.
The second commit changed KVM_GET_SREGS so that it did not clear the
flags of an unusable segment.
Since QEMU does not itself maintain the "unusable" flag across a
migration, the end result is that unusable segments read from a kernel
with these commits and loaded into a kernel without these commits are
not properly recognised as being unusable.
This commit updates both get_seg and set_seg so that the problem is
avoided even when migrating to or migrating from a QEMU without this
commit. In get_seg, we clear the segment flags if the segment is marked
unusable. In set_seg, we mark the segment unusable if the segment's
"present" flag is not set.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Message-Id: <
1449464047-17467-1-git-send-email-mike@very.puzzling.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 16 Dec 2015 11:32:22 +0000 (12:32 +0100)]
rcu: optimize rcu_read_lock
rcu_read_lock cannot change rcu_gp_ongoing from true to false
(the previous value of p_rcu_reader->ctr is zero), hence
there is no need to check p_rcu_reader->waiting and wake up
a concurrent synchronize_rcu.
While at it mark the wakeup as unlikely in rcu_read_unlock.
Reviewed-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
1450265542-4323-1-git-send-email-pbonzini@redhat.com>
Paolo Bonzini [Wed, 9 Dec 2015 09:34:13 +0000 (10:34 +0100)]
memory: try to inline constant-length reads
memcpy can take a large amount of time for small reads and writes.
Handle the common case of reading s/g descriptors from memory (there
is no corresponding "write" case that is as common, because writes
often use address_space_st* functions) by inlining the relevant
parts of address_space_read into the caller.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 9 Dec 2015 16:47:39 +0000 (17:47 +0100)]
memory: inline a few small accessors
These are used in the address_space_* fast paths.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 9 Dec 2015 09:18:57 +0000 (10:18 +0100)]
memory: extract first iteration of address_space_read and address_space_write
We want to inline the case where there is only one iteration, because
then the compiler can also inline the memcpy. As a start, extract
everything after the first address_space_translate call.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 9 Dec 2015 09:06:31 +0000 (10:06 +0100)]
memory: split address_space_read and address_space_write
Rather than dispatching on is_write for every iteration, make
address_space_rw call one of the two functions. The amount of
duplicate logic is pretty small, and memory_access_is_direct can
be tweaked so that it inlines better in the callers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 9 Dec 2015 10:44:25 +0000 (11:44 +0100)]
memory: avoid unnecessary object_ref/unref
For the common case of DMA into non-hotplugged RAM, it is unnecessary
but expensive to do object_ref/unref. Add back an owner field to
MemoryRegion, so that these memory regions can skip the reference
counting.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 9 Dec 2015 10:40:14 +0000 (11:40 +0100)]
memory: reorder MemoryRegion fields
Order fields so that all fields accessed during a RAM read/write fit in
the same cache line.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 16 Dec 2015 09:31:26 +0000 (10:31 +0100)]
exec: make qemu_ram_ptr_length more similar to qemu_get_ram_ptr
Notably, use qemu_get_ram_block to enjoy the MRU optimization.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 16 Dec 2015 09:30:47 +0000 (10:30 +0100)]
exec: always call qemu_get_ram_ptr within rcu_read_lock
Simplify the code and document the assumption. The only caller
that is not within rcu_read_lock is memory_region_get_ram_ptr.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 13 Nov 2015 12:52:21 +0000 (13:52 +0100)]
linux-user: convert DEBUG_SIGNAL logging to tracepoints
"Unimplemented" messages go to stderr, everything else goes to tracepoints
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 13 Nov 2015 12:20:35 +0000 (13:20 +0100)]
linux-user: avoid "naked" qemu_log
Ensure that all log writes are protected by qemu_loglevel_mask or,
in serious cases, go to both the log and stderr.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 13 Nov 2015 11:32:19 +0000 (12:32 +0100)]
user: introduce "-d page"
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 13 Nov 2015 12:43:35 +0000 (13:43 +0100)]
xtensa: avoid "naked" qemu_log
Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 13 Nov 2015 12:35:27 +0000 (13:35 +0100)]
tricore: avoid "naked" qemu_log
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 13 Nov 2015 12:34:23 +0000 (13:34 +0100)]
ppc: cleanup logging
Avoid "naked" qemu_log, bring documentation for DEBUG #defines
up to date.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 13 Nov 2015 12:25:21 +0000 (13:25 +0100)]
s390x: avoid "naked" qemu_log
Convert to debug-only qemu_log.
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 13 Nov 2015 12:24:57 +0000 (13:24 +0100)]
microblaze: avoid "naked" qemu_log
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 13 Nov 2015 12:24:26 +0000 (13:24 +0100)]
cris: avoid "naked" qemu_log
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 13 Nov 2015 12:23:45 +0000 (13:23 +0100)]
alpha: convert "naked" qemu_log to tracepoint
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 13 Nov 2015 12:16:27 +0000 (13:16 +0100)]
qemu-log: introduce qemu_log_separate
In some cases, the same message is printed both on stderr and in the log.
Avoid duplicate output in the default case where stderr _is_ the log,
and standardize this to stderr+log where it used to use stdio+log.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Olga Krishtal [Fri, 4 Dec 2015 06:42:04 +0000 (09:42 +0300)]
qemu-char: append opt to stop truncation of serial file
Our QA team wants to preserve serial output of the guest in between QEMU
runs to perform post-analysis.
By default this behavior is off (file is truncated each time QEMU is
started or device is plugged).
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
1449211324-17856-1-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 17 Dec 2015 16:16:08 +0000 (17:16 +0100)]
kvm: x86: add support for KVM_CAP_SPLIT_IRQCHIP
This patch adds support for split IRQ chip mode. When
KVM_CAP_SPLIT_IRQCHIP is enabled:
1.) The PIC, PIT, and IOAPIC are implemented in userspace while
the LAPIC is implemented by KVM.
2.) The software IOAPIC delivers interrupts to the KVM LAPIC via
kvm_set_irq. Interrupt delivery is configured via the MSI routing
table, for which routes are reserved in target-i386/kvm.c then
configured in hw/intc/ioapic.c
3.) KVM delivers IOAPIC EOIs via a new exit KVM_EXIT_IOAPIC_EOI,
which is handled in target-i386/kvm.c and relayed to the software
IOAPIC via ioapic_eoi_broadcast.
Signed-off-by: Matt Gingell <gingell@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Matt Gingell [Mon, 16 Nov 2015 18:03:06 +0000 (10:03 -0800)]
kvm: add support for -machine kernel_irqchip=split
This patch adds the initial plumbing for split IRQ chip mode via
KVM_CAP_SPLIT_IRQCHIP. In addition to option processing, a number of
kvm_*_in_kernel macros are defined to help clarify which component is
where.
Signed-off-by: Matt Gingell <gingell@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Andrey Smetanin [Wed, 25 Nov 2015 15:21:25 +0000 (18:21 +0300)]
target-i386/kvm: Hyper-V SynIC timers MSR's support
Hyper-V SynIC timers are host timers that are configurable
by guest through corresponding MSR's (HV_X64_MSR_STIMER*).
Guest setup and use fired by host events(SynIC interrupt
and appropriate timer expiration message) as guest clock
events.
The state of Hyper-V SynIC timers are stored in corresponding
MSR's. This patch seria implements such MSR's support and migration.
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
CC: Denis V. Lunev <den@openvz.org>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: kvm@vger.kernel.org
Message-Id: <
1448464885-8300-3-git-send-email-asmetanin@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Andrey Smetanin [Tue, 10 Nov 2015 12:52:44 +0000 (15:52 +0300)]
hw/misc: Hyper-V test device 'hyperv-testdev'
'hyperv-testdev' will be used by kvm-unit-tests
to setup Hyper-V SynIC SINT's routing and to inject
Hyper-V SynIC SINT's.
Hyper-V test device is ISA type device that creates 0x3000
IO memory region and catches write access into it. Every
write operation data decoded into ctl code and parameters
for Hyper-V test device.
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Andrey Smetanin [Tue, 10 Nov 2015 12:52:43 +0000 (15:52 +0300)]
target-i386/hyperv: Hyper-V SynIC SINT routing and vcpu exit
Hyper-V SynIC(synthetic interrupt controller) helpers for
Hyper-V SynIC irq routing setup, irq injection, irq ack
notifications event/message pages changes tracking for future use.
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Andrey Smetanin [Tue, 10 Nov 2015 12:52:42 +0000 (15:52 +0300)]
kvm: Hyper-V SynIC irq routing support
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Andrey Smetanin [Wed, 11 Nov 2015 10:18:38 +0000 (13:18 +0300)]
target-i386/kvm: Hyper-V SynIC MSR's support
This patch does Hyper-V Synthetic interrupt
controller(Hyper-V SynIC) MSR's support and
migration. Hyper-V SynIC is enabled by cpu's
'hv-synic' option.
This patch does not allow cpu creation if
'hv-synic' option specified but kernel
doesn't support Hyper-V SynIC.
Changes v3:
* removed 'msr_hv_synic_version' migration because
it's value always the same
* moved SynIC msr's initialization into kvm_arch_init_vcpu
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 15 Dec 2015 14:00:27 +0000 (15:00 +0100)]
linux-headers: update from kvm/next
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Shmulik Ladkani [Sun, 13 Dec 2015 08:08:32 +0000 (10:08 +0200)]
vmw_pvscsi: Introduce 'x-disable-pcie' backword compatability property
Following the previous patch which changed pvscsi to be a pci express
device, this patch introduces a boolean property 'x-disable-pcie'.
Its default value is false, exposing pvscsi as a pcie device.
Setting 'x-disable-pcie' to 'on' preserves the old 'pci device' (non
express) behavior. This allows migration to older versions.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <
1449994112-7054-7-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Shmulik Ladkani [Sun, 13 Dec 2015 08:08:31 +0000 (10:08 +0200)]
vmw_pvscsi: The pvscsi device is a PCIE endpoint
Report the 'express endpoint' capability if on a PCIE bus.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <
1449994112-7054-6-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Shmulik Ladkani [Sun, 13 Dec 2015 08:08:30 +0000 (10:08 +0200)]
vmw_pvscsi: coding: Introduce PVSCSIClass
Introduce a class type for pvscsi, and the usual
DEVICE_CLASS/DEVICE_GET_CLASS macros.
No semantic change.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <
1449994112-7054-5-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Shmulik Ladkani [Sun, 13 Dec 2015 08:08:29 +0000 (10:08 +0200)]
vmw_pvscsi: Introduce 'x-old-pci-configuration' backword compatability property
Following the previous patches, which introduced various changes in
pvscsi's pci configuration space (device subsystem id and revision, msi
offset), this patch introduces a boolean property
'x-old-pci-configuration' to pvscsi.
Its default value is false, exposing the above changes in the pci config
space.
Setting 'x-old-pci-configuration' to 'on' preserves the old behavior,
which allows migration to older versions.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <
1449994112-7054-4-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Shmulik Ladkani [Sun, 13 Dec 2015 08:08:28 +0000 (10:08 +0200)]
vmw_pvscsi: Change offset of msi pci capability
Place device reported MSI capability at the same offset as placed by
the VMware virtual hardware - at offset 0x7c.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <
1449994112-7054-3-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Shmulik Ladkani [Sun, 13 Dec 2015 08:08:27 +0000 (10:08 +0200)]
vmw_pvscsi: Set device subsystem and revision
To be VMware PVSCSI SCSI Controller, rev 02.
As reported by the VMware virtual hardware.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <
1449994112-7054-2-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pavel Fedin [Fri, 20 Nov 2015 09:37:16 +0000 (12:37 +0300)]
memory: emulate ioeventfd
The ioeventfd mechanism is used by vhost, dataplane, and virtio-pci to
turn guest MMIO/PIO writes into eventfd file descriptor events. This
allows arbitrary threads to be notified when the guest writes to a
specific MMIO/PIO address.
qtest and TCG do not support ioeventfd because memory writes are not
checked against registered ioeventfds in QEMU. This patch implements
this in memory_region_dispatch_write() so qtest can use ioeventfd.
Also this patch fixes vhost aborting on some misconfigured old kernels
like 3.18.0 on ARM. It is possible to explicitly enable CONFIG_EVENTFD
in expert settings, while MMIO binding support in KVM will still be
missing.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-Id: <
006e01d12377$
0b9c2d40$
22d487c0$@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Andrew Jones [Tue, 10 Nov 2015 00:23:42 +0000 (19:23 -0500)]
kvm-all: PAGE_SIZE should be real host page size
Just noticed this while grepping TARGET_PAGE_SIZE for an unrelated
reason. I didn't use qemu_real_host_page_size as kvm_set_phys_mem()
does, because we'd need to make sure page_size_init() has run first.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <
1447115022-4142-1-git-send-email-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Eduardo Habkost [Fri, 6 Nov 2015 22:11:21 +0000 (20:11 -0200)]
exec: Remove unnecessary RAM_FILE flag
The only code that sets RAMBlock.fd is file_ram_alloc(), and the only
code that calls file_ram_alloc() sets the RAM_FILE flag. That means the
flag is always set when RAMBlock.fd >= 0, and the munmap() call at
reclaim_ramblock() is dead code that never runs.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <
1446847881-9385-1-git-send-email-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Eduardo Habkost [Fri, 6 Nov 2015 21:20:05 +0000 (19:20 -0200)]
memory: Eliminate memory_region_destructor_ram_from_ptr()
The function is equivalent to memory_region_destructor_ram(), so
it's not needed anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <
1446844805-14492-3-git-send-email-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Eduardo Habkost [Fri, 6 Nov 2015 21:20:04 +0000 (19:20 -0200)]
exec: Eliminate qemu_ram_free_from_ptr()
Replace qemu_ram_free_from_ptr() with qemu_ram_free().
The only difference between qemu_ram_free_from_ptr() and
qemu_ram_free() is that g_free_rcu() is used instead of
call_rcu(reclaim_ramblock). We can safely replace it because:
* RAM blocks allocated by qemu_ram_alloc_from_ptr() always have
RAM_PREALLOC set;
* reclaim_ramblock(block) will do nothing except g_free(block)
if RAM_PREALLOC is set at block->flags.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <
1446844805-14492-2-git-send-email-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Thu, 17 Dec 2015 13:38:34 +0000 (13:38 +0000)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-
20151217-1' into staging
target-arm queue:
* i.MX CCM patches
* support guest debug for AArch64 KVM
* support power button on virt board via GPIO
* clean up AArch32 singlestep code
* raise exception on misaligned LDREX operands
* soc-dma: use hwaddr instead of target_ulong in printf
* explicitly mark some ARM device loads as little-endian
* i.MX: add support for lower and upper interrupt in GPIO
# gpg: Signature made Thu 17 Dec 2015 13:38:09 GMT using RSA key ID
14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
* remotes/pmaydell/tags/pull-target-arm-
20151217-1: (25 commits)
i.MX: Add an i.MX25 specific CCM class/instance
i.MX: Split the CCM class into an abstract base class and a concrete class
i.MX: rename i.MX CCM get_clock() function and CLK ID enum names
i.MX: Fix i.MX31 default/reset configuration
tests/guest-debug: introduce basic gdbstub tests
target-arm: kvm - re-inject guest debug exceptions
target-arm: kvm - add support for HW assisted debug
target-arm: kvm - support for single step
target-arm: kvm - implement software breakpoints
target-arm: kvm64 - introduce kvm_arm_init_debug()
ARM: Virt: Add gpio-keys node for Poweroff using DT
ARM: Virt: Add QEMU powerdown notifier and hook it to GPIO Pin 3
ARM: ACPI: Add _E03 for Power Button
ACPI: Add aml_gpio_int() wrapper for GPIO Interrupt Connection
ACPI: Add GPIO Connection Descriptor
ARM: ACPI: Add power button device in ACPI DSDT table
ARM: ACPI: Add GPIO controller in ACPI DSDT table
ARM: Virt: Add a GPIO controller
acpi: extend aml_interrupt() to support multiple irqs
acpi: support serialized method
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Jean-Christophe Dubois [Thu, 17 Dec 2015 13:37:16 +0000 (13:37 +0000)]
i.MX: Add an i.MX25 specific CCM class/instance
With this CCM, i.MX25 timer is accurate with "real world time".
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id:
2c0cf90be767bfc8520661eca891ab22c61f18fe.
1449528242.git.jcd@tribudubois.net
Reviewed-by Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Jean-Christophe Dubois [Thu, 17 Dec 2015 13:37:15 +0000 (13:37 +0000)]
i.MX: Split the CCM class into an abstract base class and a concrete class
The IMX_CCM class is now the base abstract class that is used by EPIT
and GPT timer implementation.
IMX31_CCM class is the concrete class implementing CCM for i.MX31 SOC.
For now the i.MX25 continues to use the i.MX31 CCM implementation.
An i.MX25 specific CCM will be introduced in a later patch.
We also rework initialization to stop using deprecated sysbus device init.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id:
fd3c7f87b50f5ebc99ec91f01413db35017f116d.
1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Jean-Christophe Dubois [Thu, 17 Dec 2015 13:37:15 +0000 (13:37 +0000)]
i.MX: rename i.MX CCM get_clock() function and CLK ID enum names
This is to prepare for CCM code refactoring.
This is just a bit of function and enum values renaming.
We also remove some useless intermediate variables.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id:
53c4d9b9611988a5f56f178f285e04490747925e.
1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Jean-Christophe Dubois [Thu, 17 Dec 2015 13:37:15 +0000 (13:37 +0000)]
i.MX: Fix i.MX31 default/reset configuration
Linux on i.MX31/KZM is expecting the CCM to use the CKIH ref clock
instead of the CKIL plus the FPM multiplier.
We change the CCMR reg reset value to match linux expected config.
This allows the CCM to provide a 39MHz clk (as expected by linux)
instead of the actual 50MHz.
With this change the "sleep 60" command on linux is time accurate
with "real world time".
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id:
6dc5bc4e0a450b20cecdb2991112e7281b653345.
1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alex Bennée [Thu, 17 Dec 2015 13:37:15 +0000 (13:37 +0000)]
tests/guest-debug: introduce basic gdbstub tests
The aim of these tests is to combine with an appropriate kernel
image (with symbol-file vmlinux) and check it behaves as it should.
Given a kernel it checks:
- single step
- software breakpoint
- hardware breakpoint
- access, read and write watchpoints
On success it returns 0 to the calling process.
I've not plumbed this into the "make check" logic though as we need a
solution for providing non-host binaries to the tests. However the test
is structured to work with pretty much any Linux kernel image as it
uses the basic kernel_init code which is common across architectures.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id:
1449599553-24713-7-git-send-email-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alex Bennée [Thu, 17 Dec 2015 13:37:15 +0000 (13:37 +0000)]
target-arm: kvm - re-inject guest debug exceptions
If we can't find details for the debug exception in our debug state
then we can assume the exception is due to debugging inside the guest.
To inject the exception into the guest state we re-use the TCG exception
code (do_interrupt).
However while guest debugging is in effect we currently can't handle the
guest using single step as we will keep trapping to back to userspace.
GDB makes heavy use of single-step behind the scenes which effectively
means the guest's ability to debug itself is disabled while it is being
debugged.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id:
1449599553-24713-6-git-send-email-alex.bennee@linaro.org
[PMM: Fixed a few typos in comments and commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alex Bennée [Thu, 17 Dec 2015 13:37:15 +0000 (13:37 +0000)]
target-arm: kvm - add support for HW assisted debug
This adds basic support for HW assisted debug. The ioctl interface to
KVM allows us to pass an implementation defined number of break and
watch point registers. When KVM_GUESTDBG_USE_HW is specified these
debug registers will be installed in place on the world switch into the
guest.
The hardware is actually capable of more advanced matching but it is
unclear if this expressiveness is available via the gdbstub protocol.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id:
1449599553-24713-5-git-send-email-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alex Bennée [Thu, 17 Dec 2015 13:37:15 +0000 (13:37 +0000)]
target-arm: kvm - support for single step
This adds support for single-step. There isn't much to do on the QEMU
side as after we set-up the request for single step via the debug ioctl
it is all handled within the kernel.
The actual setting of the KVM_GUESTDBG_SINGLESTEP flag is already in the
common code. If the kernel doesn't support guest debug the ioctl will
simply error.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id:
1449599553-24713-4-git-send-email-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alex Bennée [Thu, 17 Dec 2015 13:37:15 +0000 (13:37 +0000)]
target-arm: kvm - implement software breakpoints
These don't involve messing around with debug registers, just setting
the breakpoint instruction in memory. GDB will not use this mechanism if
it can't access the memory to write the breakpoint.
All the kernel has to do is ensure the hypervisor traps the breakpoint
exceptions and returns to userspace.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id:
1449599553-24713-3-git-send-email-alex.bennee@linaro.org
[PMM: Fixed typo in comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alex Bennée [Thu, 17 Dec 2015 13:37:14 +0000 (13:37 +0000)]
target-arm: kvm64 - introduce kvm_arm_init_debug()
As we haven't always had guest debug support we need to probe for it.
Additionally we don't do this in the start-up capability code so we
don't fall over on old kernels.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id:
1449599553-24713-2-git-send-email-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Shannon Zhao [Thu, 17 Dec 2015 13:37:14 +0000 (13:37 +0000)]
ARM: Virt: Add gpio-keys node for Poweroff using DT
Add a gpio-keys node. This is used for Poweroff for the systems which
use DT not ACPI.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Wei Huang <wei@redhat.com>
Message-id:
1449804086-3464-11-git-send-email-zhaoshenglong@huawei.com
[PMM: use "standard-headers/linux/input.h" rather than <linux/input.h>]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Shannon Zhao [Thu, 17 Dec 2015 13:37:14 +0000 (13:37 +0000)]
ARM: Virt: Add QEMU powerdown notifier and hook it to GPIO Pin 3
Currently mach-virt model doesn't support powerdown request. Guest VM
doesn't react to system_powerdown from monitor console (or QMP) because
there is no communication mechanism for such requests. This patch registers
GPIO Pin 3 with powerdown notification. So guest VM can receive notification
when such powerdown request is triggered.
Signed-off-by: Wei Huang <wei@redhat.com>
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Wei Huang <wei@redhat.com>
Tested-by: Wei Huang <wei@redhat.com>
Message-id:
1449804086-3464-10-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Shannon Zhao [Thu, 17 Dec 2015 13:37:14 +0000 (13:37 +0000)]
ARM: ACPI: Add _E03 for Power Button
Here GPIO pin 3 is used for Power Button, add _E03 in ACPI DSDT table.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Wei Huang <wei@redhat.com>
Message-id:
1449804086-3464-9-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Shannon Zhao [Thu, 17 Dec 2015 13:37:14 +0000 (13:37 +0000)]
ACPI: Add aml_gpio_int() wrapper for GPIO Interrupt Connection
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Wei Huang <wei@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id:
1449804086-3464-8-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Shannon Zhao [Thu, 17 Dec 2015 13:37:14 +0000 (13:37 +0000)]
ACPI: Add GPIO Connection Descriptor
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Wei Huang <wei@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id:
1449804086-3464-7-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Shannon Zhao [Thu, 17 Dec 2015 13:37:14 +0000 (13:37 +0000)]
ARM: ACPI: Add power button device in ACPI DSDT table
Add power button device in ACPI DSDT table.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Wei Huang <wei@redhat.com>
Tested-by: Wei Huang <wei@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id:
1449804086-3464-6-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Shannon Zhao [Thu, 17 Dec 2015 13:37:14 +0000 (13:37 +0000)]
ARM: ACPI: Add GPIO controller in ACPI DSDT table
Add GPIO controller in ACPI DSDT table. It can be used for gpio event.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Wei Huang <wei@redhat.com>
Message-id:
1449804086-3464-5-git-send-email-zhaoshenglong@huawei.com
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Shannon Zhao [Thu, 17 Dec 2015 13:37:13 +0000 (13:37 +0000)]
ARM: Virt: Add a GPIO controller
ACPI 5.0 supports GPIO-signaled ACPI Events. This can be used for
powerdown, hotplug evnets. Add a GPIO controller in machine virt,
to support powerdown, maybe can be used for cpu hotplug. And
here we use pl061.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Wei Huang <wei@redhat.com>
Tested-by: Wei Huang <wei@redhat.com>
Message-id:
1449804086-3464-4-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Igor Mammedov [Thu, 17 Dec 2015 13:37:13 +0000 (13:37 +0000)]
acpi: extend aml_interrupt() to support multiple irqs
ASL Interrupt() macro translates to Extended Interrupt Descriptor
which supports variable number of IRQs. It will be used for
conversion of ASL code for pc/q35 machines that use it for
returning several IRQs in _PSR object.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id:
1449804086-3464-3-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Xiao Guangrong [Thu, 17 Dec 2015 13:37:13 +0000 (13:37 +0000)]
acpi: support serialized method
Add serialized method support so that explicit Mutex can be
avoided
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id:
1449804086-3464-2-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Sergey Fedorov [Thu, 17 Dec 2015 13:37:13 +0000 (13:37 +0000)]
target-arm: Fix and improve AA32 singlestep translation completion code
The AArch32 translation completion code for singlestep enabled/active
case was a way more confusing and too repetitive then it needs to be.
Probably that was the cause for a bug to be introduced into it at some
point. The bug was that SWI/HVC/SMC exception would be generated in
condition-failed instruction code path whereas it shouldn't.
This patch rewrites the code in a way similar to the non-singlestep
case.
In the condition-passed/unconditional instruction code path we need to:
- Write the condexec bits back to the CPU state
- Advance the singlestep state machine and generate a corresponding
exception in case of SWI/HVC/SMC
- Write the PC back to the CPU state if it hasn't already been written
and generate an appropriate singlestep exception otherwise
In the condition-failed instruction code path we need to:
- Set a TCG label to jump to it if the condition is failed
- Write the condexec bits back to the CPU state
- Write the PC back to the CPU state since it hasn't been written in
this case
- Generate an appropriate singlestep exception
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id:
1448474560-22475-1-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Baumann [Thu, 17 Dec 2015 13:37:13 +0000 (13:37 +0000)]
target-arm: raise exception on misaligned LDREX operands
Qemu does not generally perform alignment checks. However, the ARM ARM
requires implementation of alignment exceptions for a number of cases
including LDREX, and Windows-on-ARM relies on this.
This change adds plumbing to enable alignment checks on loads using
MO_ALIGN, a do_unaligned_access hook to raise the exception (data
abort), and uses the new aligned loads in LDREX (for all but
single-byte loads).
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id:
1449167808-5656-1-git-send-email-Andrew.Baumann@microsoft.com
[PMM: set WnR bits in syndrome and FSR as appropriate]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Paolo Bonzini [Thu, 17 Dec 2015 13:37:13 +0000 (13:37 +0000)]
arm: soc-dma: use hwaddr instead of target_ulong in printf
This is a first baby step towards removing widespread inclusion of
cpu.h and compiling more devices once (so that arm, aarch64 and
in the future target-multi can share the object files).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: changed __FUNCTION__ to __func__ since we're touching
these lines of code anyway]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Paolo Bonzini [Thu, 17 Dec 2015 13:37:13 +0000 (13:37 +0000)]
arm: explicitly mark device loads as little-endian
Behaviour of emulated devices should not depend on the endianness
of the CPU, so avoid using the endian-dependent load and store
functions in the PXA2xx and OMAP display devices. These devices
are little endian when they do DMA access.
(Since ARM softmmu is always compiled as little endian, this means
that the endian-dependent load and store functions are always little
endian, so this commit makes no functionally visible change.)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: rewrote commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Jean-Christophe Dubois [Thu, 17 Dec 2015 13:37:13 +0000 (13:37 +0000)]
i.MX: add support for lower and upper interrupt in GPIO.
The i.MX6 GPIO device supports 2 interrupts instead of one.
* 1 for the lower 16 GPIOs.
* 1 for the upper 16 GPIOs.
i.MX31 and i.MX25 only support 1 interrupt for the 32 GPIOs.
So we add a property to turn the behavior on when required.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id:
1447497668-1603-1-git-send-email-jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 17 Dec 2015 12:40:07 +0000 (12:40 +0000)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-fw-cfg-
20151217-1' into staging
fw_cfg: doc updates, various optimizations.
# gpg: Signature made Thu 17 Dec 2015 08:59:32 GMT using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-fw-cfg-
20151217-1:
fw_cfg: replace ioport data read with generic method
fw_cfg: add generic non-DMA read method
fw_cfg: avoid calculating invalid current entry pointer
fw_cfg: remove offset argument from callback prototype
fw_cfg: amend callback behavior spec to once per select
fw_cfg: move internal function call docs to header file
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 17 Dec 2015 11:50:46 +0000 (11:50 +0000)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2015-12-17' into staging
QAPI patches for 2015-12-17
# gpg: Signature made Thu 17 Dec 2015 07:33:41 GMT using RSA key ID
EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-qapi-2015-12-17: (40 commits)
qapi: Detect base class loops
qapi: Move duplicate collision checks to schema check()
qapi: Enforce (or whitelist) case conventions on qapi members
qapi: Track enum values by QAPISchemaMember, not string
qapi: Prepare new QAPISchemaMember base class
qapi: Shorter visits of optional fields
qapi: Simplify visits of optional fields
qapi: Fix alternates that accept 'number' but not 'int'
qapi: Inline _make_implicit_tag()
qapi-types: Drop unnedeed ._fwdefn
qapi: Simplify visiting of alternate types
qapi: Convert QType into QAPI built-in enum type
qobject: Rename qtype_code to QType
qobject: Simplify QObject
qapi: Change munging of CamelCase enum values
qapi: Add alias for ErrorClass
cpu: Convert CpuInfo into flat union
qapi: Remove obsolete tests for MAX collision
qapi: Don't let implicit enum MAX member collide
qapi: Tighten the regex on valid names
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 17 Dec 2015 11:10:03 +0000 (11:10 +0000)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-audio-
20151215-1' into staging
coreaudio: use new-in-OSX-10.6 APIs, cleanups.
# gpg: Signature made Tue 15 Dec 2015 10:15:24 GMT using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-audio-
20151215-1:
audio/coreaudio.c: Avoid deprecated AudioDeviceAdd/RemoveIOProc APIs
audio/coreaudio.c: Use new-in-OSX-10.6 APIs when available
audio/coreaudio.c: Factor out uses of AudioDeviceGet/SetProperty
audio/coreaudio.c: Use new-in-OSX-10.6 API for getting default voice
audio/coreaudio.c: Factor out use of AudioHardwareGetProperty
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 17 Dec 2015 10:26:17 +0000 (10:26 +0000)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-
20151215-1' into staging
usb: ehci idt fix, event support for mtp
# gpg: Signature made Tue 15 Dec 2015 09:54:22 GMT using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-usb-
20151215-1:
ehci: make idt processing more robust
usb-mtp: add support for basic mtp events
usb-mtp: Add support for inotify based file monitoring
usb-mtp: free objects on a mtp reset
usb-mtp: use a list for keeping track of children
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 17 Dec 2015 10:17:08 +0000 (10:17 +0000)]
Open 2.6 development tree
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eric Blake [Wed, 2 Dec 2015 05:20:59 +0000 (22:20 -0700)]
qapi: Detect base class loops
It should be fairly obvious that qapi base classes need to
form an acyclic graph, since QMP cannot specify the same
key more than once, while base classes are included as flat
members alongside other members added by the child. But the
old check_member_clash() parser function was not prepared to
check for this, and entered an infinite recursion (at least
until Python gives up, complaining about nesting too deep).
Now that check_member_clash() has been recently removed,
attempts at self-inheritance trigger an assertion failure
introduced by commit
ac88219a. The obvious fix is to turn
the assertion into a conditional.
This patch includes both the tests (base-cycle-direct and
base-cycle-indirect) and the fix, since the .err file output
for the unfixed case is not useful (particularly when it was
warning about unbounded recursion, as that limit may be
platform-specific).
We don't need to worry about cycles in flat unions (neither
the base type nor the type of a variant can be a union) nor
in alternates (alternate branches cannot themselves be an
alternate). But if we later allow a union type as a variant,
we will still be okay, as QAPISchemaObjectTypeVariants.check()
triggers the same QAPISchemaObjectType.check() that will
detect any loops.
Likewise, we need not worry about the case of diamond
inheritance where the same class is used for a flat union base
class and one of its variants; either both uses will introduce
a collision in trying to insert the same member name twice, or
the shared type is empty and changes nothing.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <
1449033659-25497-16-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Wed, 2 Dec 2015 05:20:58 +0000 (22:20 -0700)]
qapi: Move duplicate collision checks to schema check()
With the recent commit 'qapi: Detect collisions in C member
names', we have two different locations for detecting clashes -
one at parse time, and another at QAPISchema*.check() time.
Remove all of the ad hoc parser checks, and delete associated
code (for example, the global check_member_clash() method is
no longer needed).
Testing this showed that the test union-bad-branch wasn't adding
much: union-clash-branches also exposes the error message when
branches collide, and we've recently fixed things to avoid an
implicit collision with max. Likewise, the error for
enum-clash-member changes to report our new detection of
upper case in a value name, unless we modify the test to use
all lower case.
The wording of several error messages has changed, but the
change is generally an improvement rather than a regression.
No change to generated code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <
1449033659-25497-15-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Wed, 2 Dec 2015 05:20:57 +0000 (22:20 -0700)]
qapi: Enforce (or whitelist) case conventions on qapi members
We document that members of enums and objects should be
'lower-case', although we were not enforcing it. We have to
whitelist a few pre-existing entities that violate the norms.
Add three new tests to expose the new error message, each of
which first uses the whitelisted name 'UuidInfo' to prove the
whitelist works, then triggers the failure (this is the same
pattern used in the existing returns-whitelist.json test).
Note that by adding this check, we have effectively forbidden
an entity with a case-insensitive clash of member names, for
any entity that is not on the whitelist (although there is
still the possibility to clash via '-' vs. '_').
Not done here: a future patch should also add naming convention
support and whitelist exceptions for command, event, and type
names.
The additions to QAPISchemaMember.check_clash() check whether
info['name'] is in the whitelist (the top-most entity name at
the point 'info' tracks), rather than self.owner (the type,
possibly implicit, that directly owns the member), because it
is easier to maintain the whitelist by the names actually in
the user's .json file, rather than worrying about the names
of implicit types.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <
1449033659-25497-14-git-send-email-eblake@redhat.com>
[Simplified a bit as per discussion with Eric]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Wed, 2 Dec 2015 05:20:55 +0000 (22:20 -0700)]
qapi: Track enum values by QAPISchemaMember, not string
Rather than using just an array of strings, make enum.values be
an array of the new QAPISchemaMember type, and add a helper
member_names() method to get back at the original list of names.
Likewise, creating an enum requires wrapping strings, via a new
QAPISchema._make_enum_members() method. The benefit of wrapping
enum members in a QAPISchemaMember Python object is that we now
share the existing code for C name clash detection (although the
code is not yet active until a later commit removes the earlier
ad hoc parser checks).
In a related change, the QAPISchemaMember._pretty_owner() method
needs to learn about one more implicit type name: the generated
enum associated with a simple union.
In the interest of keeping the changes of this patch local to one
file, the visitor interface still passes just a list of names
rather than the full list of QAPISchemaMember instances. We may
want to revisit this in the future, if the consistency with
visit_object_type() is worth it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <
1449033659-25497-12-git-send-email-eblake@redhat.com>
[Eric's simplifying followup squashed in]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Wed, 2 Dec 2015 05:20:54 +0000 (22:20 -0700)]
qapi: Prepare new QAPISchemaMember base class
We want to share some clash detection code between enum values
and object type members. To assist with that, split off part
of QAPISchemaObjectTypeMember into a new base class
QAPISchemaMember that tracks name, owner, and common clash
detection code; while the former keeps the additional fields
for type and optional flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <
1449033659-25497-11-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Wed, 2 Dec 2015 05:20:53 +0000 (22:20 -0700)]
qapi: Shorter visits of optional fields
For less code, reflect the determined boolean value of an optional
visit back to the caller instead of making the caller read the
boolean after the fact.
The resulting generated code has the following diff:
|- visit_optional(v, &has_fdset_id, "fdset-id");
|- if (has_fdset_id) {
|+ if (visit_optional(v, &has_fdset_id, "fdset-id")) {
| visit_type_int(v, &fdset_id, "fdset-id", &err);
| if (err) {
| goto out;
| }
| }
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <
1449033659-25497-10-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Wed, 2 Dec 2015 05:20:52 +0000 (22:20 -0700)]
qapi: Simplify visits of optional fields
None of the visitor callbacks would set an error when testing
if an optional field was present; make this part of the interface
contract by eliminating the errp argument.
The resulting generated code has a nice diff:
|- visit_optional(v, &has_fdset_id, "fdset-id", &err);
|- if (err) {
|- goto out;
|- }
|+ visit_optional(v, &has_fdset_id, "fdset-id");
| if (has_fdset_id) {
| visit_type_int(v, &fdset_id, "fdset-id", &err);
| if (err) {
| goto out;
| }
| }
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <
1449033659-25497-9-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Wed, 2 Dec 2015 05:20:51 +0000 (22:20 -0700)]
qapi: Fix alternates that accept 'number' but not 'int'
The QMP input visitor allows integral values to be assigned by
promotion to a QTYPE_QFLOAT. However, when parsing an alternate,
we did not take this into account, such that an alternate that
accepts 'number' and some other type, but not 'int', would reject
integral values.
With this patch, we now have the following desirable table:
alternate has case selected for
'int' 'number' QTYPE_QINT QTYPE_QFLOAT
no no error error
no yes 'number' 'number'
yes no 'int' error
yes yes 'int' 'number'
While it is unlikely that we will ever use 'number' in an
alternate other than in the testsuite, it never hurts to be
more precise in what we allow.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <
1449033659-25497-8-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Wed, 2 Dec 2015 05:20:50 +0000 (22:20 -0700)]
qapi: Inline _make_implicit_tag()
Now that alternates no longer use an implicit tag, we can
inline _make_implicit_tag() into its one caller,
_def_union_type().
No change to generated code.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <
1449033659-25497-7-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Wed, 2 Dec 2015 05:20:49 +0000 (22:20 -0700)]
qapi-types: Drop unnedeed ._fwdefn
Previously, the generated code in qapi-types.c initialized all
enum lookup tables first, prior to any other definitions. But
there are no topological sorting requirements that mandate this
layout, so we can drop the QAPISchemaGenTypeVisitor._fwdefn
field and just generate all definitions in visitation order.
The generated code shows some churn due to reordering, but it
is still fairly straightforward to follow (all the deletions
occur in one hunk, and all the deleted lines are re-inserted
in the same order later in the same files, just spread across
multiple insertion points).
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <
1449033659-25497-6-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>